* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2015-02-15 11:29 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2015-02-15 11:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20150215/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20150215/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ppc-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ppc-20150215/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20150215/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: XATTR support is not available
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20150215/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc-20150215///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150215//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150215//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc-20150215/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-libs/timezone-data-2014j
>>> Installing (1 of 2) sys-libs/timezone-data-2014j
>>> Emerging (2 of 2) sys-libs/glibc-2.19-r1
>>> Installing (2 of 2) sys-libs/glibc-2.19-r1
* Messages for package sys-libs/timezone-data-2014j:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2 to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/file sys-devel/make sys-devel/binutils virtual/libc sys-devel/patch virtual/package-manager app-arch/tar sys-devel/gcc sys-apps/gawk sys-devel/bison sys-apps/grep app-shells/bash app-arch/gzip net-misc/wget virtual/shadow sys-apps/net-tools sys-apps/findutils sys-devel/libtool virtual/os-headers sys-devel/gettext sys-devel/flex sys-apps/sed sys-apps/baselayout app-arch/xz-utils sys-apps/diffutils net-misc/rsync sys-apps/which app-arch/bzip2 sys-devel/automake sys-apps/less virtual/pkgconfig virtual/editor sys-apps/makedev sys-apps/coreutils sys-devel/autoconf sys-devel/gnuconfig
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014j to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.1-r4 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.8-r2 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.18.3.2 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-devel/libtool-2.4.2-r1::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(dev-libs/libltdl-2.4.4::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20150215/.catalyst_lock'
Full build log at /tmp/catalyst-auto.56PgLT/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2015-11-29 12:01 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2015-11-29 12:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/request.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/response.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/robotparser.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/uu.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/uuid.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/__main__.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/scripts'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/scripts/posix'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/warnings.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wave.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/weakref.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/webbrowser.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/handlers.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/headers.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/simple_server.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/util.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/validate.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xdrlib.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/__init__.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/NodeFilter.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/domreg.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/expatbuilder.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/minicompat.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/minidom.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/pulldom.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/xmlbuilder.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementInclude.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementPath.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementTree.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/cElementTree.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers/expat.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/_exceptions.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/expatreader.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/handler.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/saxutils.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/xmlreader.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/client.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/server.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/zipfile.py'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/powerpc-unknown-linux-gnu \
./python -E -Wi /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/compileall.py \
-d /usr/lib/python3.4/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/powerpc-unknown-linux-gnu \
./python -E -Wi -O /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/compileall.py \
-d /usr/lib/python3.4/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/powerpc-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar3.4.3.final.0.pickle
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/powerpc-unknown-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar3.4.3.final.0.pickle
if test "xno" != "xno" ; then \
case no in \
upgrade) ensurepip="--altinstall --upgrade" ;; \
install|*) ensurepip="--altinstall" ;; \
esac; \
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/powerpc-unknown-linux-gnu ./python -E -m ensurepip \
$ensurepip --root=/var/tmp/portage/dev-lang/python-3.4.3/image// ; \
fi
* ERROR: dev-lang/python-3.4.3::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4135: Called python_domodule 'epython.py'
* environment, line 3321: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.4.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.4.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.4.3/work/powerpc-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.4.3/work/Python-3.4.3'
* Messages for package sys-libs/timezone-data-2015f merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-481 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.21-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r4 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.4.3 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-3.4.3::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4135: Called python_domodule 'epython.py'
* environment, line 3321: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.4.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.4.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.4.3/work/powerpc-unknown-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.4.3/work/Python-3.4.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20151129/.catalyst_lock'
Full build log at /tmp/catalyst-auto.xMh1js/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2015-06-14 10:43 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2015-06-14 10:43 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.8.4
>>> Emerging (1 of 80) sys-libs/zlib-1.2.8-r1::gentoo for /tmp/stage1root/
>>> Installing (1 of 80) sys-libs/zlib-1.2.8-r1::gentoo to /tmp/stage1root/
>>> Emerging (2 of 80) sys-libs/ncurses-5.9-r3::gentoo for /tmp/stage1root/
>>> Installing (2 of 80) sys-libs/ncurses-5.9-r3::gentoo to /tmp/stage1root/
>>> Emerging (3 of 80) app-arch/bzip2-1.0.6-r6::gentoo for /tmp/stage1root/
>>> Installing (3 of 80) app-arch/bzip2-1.0.6-r6::gentoo to /tmp/stage1root/
>>> Emerging (4 of 80) virtual/libiconv-0-r2::gentoo for /tmp/stage1root/
>>> Installing (4 of 80) virtual/libiconv-0-r2::gentoo to /tmp/stage1root/
>>> Emerging (5 of 80) sys-devel/gnuconfig-20150304::gentoo for /tmp/stage1root/
>>> Installing (5 of 80) sys-devel/gnuconfig-20150304::gentoo to /tmp/stage1root/
>>> Emerging (6 of 80) sys-apps/gentoo-functions-0.8::gentoo for /tmp/stage1root/
>>> Installing (6 of 80) sys-apps/gentoo-functions-0.8::gentoo to /tmp/stage1root/
>>> Emerging (7 of 80) virtual/libintl-0-r1::gentoo for /tmp/stage1root/
>>> Installing (7 of 80) virtual/libintl-0-r1::gentoo to /tmp/stage1root/
>>> Emerging (8 of 80) app-arch/xz-utils-5.0.8::gentoo for /tmp/stage1root/
>>> Installing (8 of 80) app-arch/xz-utils-5.0.8::gentoo to /tmp/stage1root/
>>> Emerging (9 of 80) sys-apps/sed-4.2.1-r1::gentoo for /tmp/stage1root/
>>> Installing (9 of 80) sys-apps/sed-4.2.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (10 of 80) sys-apps/file-5.22::gentoo for /tmp/stage1root/
>>> Installing (10 of 80) sys-apps/file-5.22::gentoo to /tmp/stage1root/
>>> Emerging (11 of 80) sys-devel/gcc-config-1.7.3::gentoo for /tmp/stage1root/
>>> Installing (11 of 80) sys-devel/gcc-config-1.7.3::gentoo to /tmp/stage1root/
>>> Emerging (12 of 80) sys-libs/timezone-data-2015b::gentoo for /tmp/stage1root/
>>> Installing (12 of 80) sys-libs/timezone-data-2015b::gentoo to /tmp/stage1root/
>>> Emerging (13 of 80) app-misc/editor-wrapper-4::gentoo for /tmp/stage1root/
>>> Installing (13 of 80) app-misc/editor-wrapper-4::gentoo to /tmp/stage1root/
>>> Emerging (14 of 80) dev-libs/popt-1.16-r2::gentoo for /tmp/stage1root/
>>> Installing (14 of 80) dev-libs/popt-1.16-r2::gentoo to /tmp/stage1root/
>>> Emerging (15 of 80) sys-apps/shadow-4.1.5.1-r1::gentoo for /tmp/stage1root/
>>> Installing (15 of 80) sys-apps/shadow-4.1.5.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (16 of 80) dev-lang/python-exec-2.0.1-r1::gentoo for /tmp/stage1root/
>>> Installing (16 of 80) dev-lang/python-exec-2.0.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (17 of 80) dev-libs/libffi-3.0.13-r1::gentoo for /tmp/stage1root/
>>> Installing (17 of 80) dev-libs/libffi-3.0.13-r1::gentoo to /tmp/stage1root/
>>> Emerging (18 of 80) sys-apps/gawk-4.0.2::gentoo for /tmp/stage1root/
>>> Installing (18 of 80) sys-apps/gawk-4.0.2::gentoo to /tmp/stage1root/
>>> Emerging (19 of 80) sys-devel/patch-2.7.5::gentoo for /tmp/stage1root/
>>> Installing (19 of 80) sys-devel/patch-2.7.5::gentoo to /tmp/stage1root/
>>> Emerging (20 of 80) app-arch/tar-1.27.1-r2::gentoo for /tmp/stage1root/
>>> Installing (20 of 80) app-arch/tar-1.27.1-r2::gentoo to /tmp/stage1root/
>>> Emerging (21 of 80) sys-devel/make-4.1-r1::gentoo for /tmp/stage1root/
>>> Installing (21 of 80) sys-devel/make-4.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (22 of 80) sys-apps/findutils-4.4.2-r1::gentoo for /tmp/stage1root/
>>> Installing (22 of 80) sys-apps/findutils-4.4.2-r1::gentoo to /tmp/stage1root/
>>> Emerging (23 of 80) app-arch/gzip-1.6::gentoo for /tmp/stage1root/
>>> Installing (23 of 80) app-arch/gzip-1.6::gentoo to /tmp/stage1root/
>>> Emerging (24 of 80) sys-apps/which-2.20-r1::gentoo for /tmp/stage1root/
>>> Installing (24 of 80) sys-apps/which-2.20-r1::gentoo to /tmp/stage1root/
>>> Emerging (25 of 80) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (25 of 80) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
>>> Emerging (26 of 80) sys-devel/autoconf-wrapper-13::gentoo for /tmp/stage1root/
>>> Installing (26 of 80) sys-devel/autoconf-wrapper-13::gentoo to /tmp/stage1root/
>>> Emerging (27 of 80) dev-libs/expat-2.1.0-r4::gentoo for /tmp/stage1root/
>>> Installing (27 of 80) dev-libs/expat-2.1.0-r4::gentoo to /tmp/stage1root/
>>> Emerging (28 of 80) sys-devel/automake-wrapper-9::gentoo for /tmp/stage1root/
>>> Installing (28 of 80) sys-devel/automake-wrapper-9::gentoo to /tmp/stage1root/
>>> Emerging (29 of 80) dev-util/pkgconfig-0.28-r2::gentoo for /tmp/stage1root/
>>> Installing (29 of 80) dev-util/pkgconfig-0.28-r2::gentoo to /tmp/stage1root/
>>> Emerging (30 of 80) sys-apps/makedev-3.23.1::gentoo for /tmp/stage1root/
>>> Installing (30 of 80) sys-apps/makedev-3.23.1::gentoo to /tmp/stage1root/
>>> Emerging (31 of 80) dev-libs/gmp-5.1.3-r1::gentoo for /tmp/stage1root/
>>> Installing (31 of 80) dev-libs/gmp-5.1.3-r1::gentoo to /tmp/stage1root/
>>> Emerging (32 of 80) sys-apps/coreutils-8.21::gentoo for /tmp/stage1root/
>>> Installing (32 of 80) sys-apps/coreutils-8.21::gentoo to /tmp/stage1root/
>>> Emerging (33 of 80) virtual/libffi-3.0.13-r1::gentoo for /tmp/stage1root/
>>> Installing (33 of 80) virtual/libffi-3.0.13-r1::gentoo to /tmp/stage1root/
>>> Emerging (34 of 80) sys-devel/binutils-config-4-r2::gentoo for /tmp/stage1root/
>>> Installing (34 of 80) sys-devel/binutils-config-4-r2::gentoo to /tmp/stage1root/
>>> Emerging (35 of 80) sys-apps/sandbox-2.6-r1::gentoo for /tmp/stage1root/
>>> Installing (35 of 80) sys-apps/sandbox-2.6-r1::gentoo to /tmp/stage1root/
>>> Emerging (36 of 80) app-misc/pax-utils-1.0.3::gentoo for /tmp/stage1root/
>>> Installing (36 of 80) app-misc/pax-utils-1.0.3::gentoo to /tmp/stage1root/
>>> Emerging (37 of 80) virtual/shadow-0::gentoo for /tmp/stage1root/
>>> Installing (37 of 80) virtual/shadow-0::gentoo to /tmp/stage1root/
>>> Emerging (38 of 80) sys-apps/net-tools-1.60_p20130513023548::gentoo for /tmp/stage1root/
>>> Installing (38 of 80) sys-apps/net-tools-1.60_p20130513023548::gentoo to /tmp/stage1root/
>>> Emerging (39 of 80) sys-apps/diffutils-3.3::gentoo for /tmp/stage1root/
>>> Installing (39 of 80) sys-apps/diffutils-3.3::gentoo to /tmp/stage1root/
>>> Emerging (40 of 80) sys-apps/less-458::gentoo for /tmp/stage1root/
>>> Installing (40 of 80) sys-apps/less-458::gentoo to /tmp/stage1root/
>>> Emerging (41 of 80) sys-devel/m4-1.4.16::gentoo for /tmp/stage1root/
>>> Installing (41 of 80) sys-devel/m4-1.4.16::gentoo to /tmp/stage1root/
>>> Emerging (42 of 80) dev-libs/libltdl-2.4.6::gentoo for /tmp/stage1root/
>>> Installing (42 of 80) dev-libs/libltdl-2.4.6::gentoo to /tmp/stage1root/
>>> Emerging (43 of 80) virtual/pkgconfig-0-r1::gentoo for /tmp/stage1root/
>>> Installing (43 of 80) virtual/pkgconfig-0-r1::gentoo to /tmp/stage1root/
>>> Emerging (44 of 80) dev-libs/mpfr-3.1.2_p10::gentoo for /tmp/stage1root/
>>> Installing (44 of 80) dev-libs/mpfr-3.1.2_p10::gentoo to /tmp/stage1root/
>>> Emerging (45 of 80) sys-devel/flex-2.5.39-r1::gentoo for /tmp/stage1root/
>>> Installing (45 of 80) sys-devel/flex-2.5.39-r1::gentoo to /tmp/stage1root/
>>> Emerging (46 of 80) sys-devel/bison-2.4.3::gentoo for /tmp/stage1root/
>>> Installing (46 of 80) sys-devel/bison-2.4.3::gentoo to /tmp/stage1root/
>>> Emerging (47 of 80) dev-libs/mpc-1.0.2-r1::gentoo for /tmp/stage1root/
>>> Installing (47 of 80) dev-libs/mpc-1.0.2-r1::gentoo to /tmp/stage1root/
>>> Emerging (48 of 80) sys-devel/binutils-2.24-r3::gentoo for /tmp/stage1root/
>>> Installing (48 of 80) sys-devel/binutils-2.24-r3::gentoo to /tmp/stage1root/
>>> Emerging (49 of 80) app-admin/eselect-1.4.4::gentoo for /tmp/stage1root/
>>> Installing (49 of 80) app-admin/eselect-1.4.4::gentoo to /tmp/stage1root/
>>> Emerging (50 of 80) app-eselect/eselect-python-20111108::gentoo for /tmp/stage1root/
>>> Installing (50 of 80) app-eselect/eselect-python-20111108::gentoo to /tmp/stage1root/
>>> Emerging (51 of 80) sys-kernel/linux-headers-3.18::gentoo for /tmp/stage1root/
>>> Installing (51 of 80) sys-kernel/linux-headers-3.18::gentoo to /tmp/stage1root/
>>> Emerging (52 of 80) virtual/os-headers-0::gentoo for /tmp/stage1root/
>>> Installing (52 of 80) virtual/os-headers-0::gentoo to /tmp/stage1root/
>>> Emerging (53 of 80) dev-libs/iniparser-3.1-r1::gentoo for /tmp/stage1root/
>>> Installing (53 of 80) dev-libs/iniparser-3.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (54 of 80) app-portage/portage-utils-0.56::gentoo for /tmp/stage1root/
>>> Failed to emerge app-portage/portage-utils-0.56 for /tmp/stage1root/, Log file:
>>> '/var/tmp/portage/app-portage/portage-utils-0.56/temp/build.log'
* Package: app-portage/portage-utils-0.56
* Repository: gentoo
* Maintainer: portage-utils@gentoo.org
* USE: abi_ppc_32 build elibc_glibc kernel_linux ppc userland_GNU
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Applying portage-utils-0.56-qcheck-tz.patch ...
[ ok ]
* Applying portage-utils-0.56-qlop-tz.patch ...
[ ok ]
: q : qatom : qcache : qcheck : qdepends : qfile : qgrep : qlist : qlop : qmerge : qpkg : qsearch : qsize : qtbz2 : quse : qxpak :
powerpc-unknown-linux-gnu-gcc -O2 -mcpu=powerpc -mtune=powerpc -pipe -std=gnu99 -Wl,-O1 -Wl,--as-needed main.c -o q -liniparser
In file included from main.c:9:0:
porting.h:52:23: fatal error: iniparser.h: No such file or directory
#include <iniparser.h>
^
compilation terminated.
Makefile:73: recipe for target 'q' failed
make: *** [q] Error 1
* ERROR: app-portage/portage-utils-0.56::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=app-portage/portage-utils-0.56::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-portage/portage-utils-0.56::gentoo'`.
* The complete build log is located at '/var/tmp/portage/app-portage/portage-utils-0.56/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-portage/portage-utils-0.56/temp/environment'.
* Working directory: '/var/tmp/portage/app-portage/portage-utils-0.56/work/portage-utils-0.56'
* S: '/var/tmp/portage/app-portage/portage-utils-0.56/work/portage-utils-0.56'
* Messages for package sys-libs/timezone-data-2015b merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.21 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* ERROR: app-portage/portage-utils-0.56::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=app-portage/portage-utils-0.56::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-portage/portage-utils-0.56::gentoo'`.
* The complete build log is located at '/var/tmp/portage/app-portage/portage-utils-0.56/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-portage/portage-utils-0.56/temp/environment'.
* Working directory: '/var/tmp/portage/app-portage/portage-utils-0.56/work/portage-utils-0.56'
* S: '/var/tmp/portage/app-portage/portage-utils-0.56/work/portage-utils-0.56'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20150614/.catalyst_lock'
Full build log at /tmp/catalyst-auto.Gxl1c8/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2015-03-01 11:29 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2015-03-01 11:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20150301/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20150301/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ppc-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ppc-20150301/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20150301/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: XATTR support is not available
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20150301/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc-20150301///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150301//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150301//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc-20150301/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-libs/timezone-data-2014j
>>> Installing (1 of 2) sys-libs/timezone-data-2014j
>>> Emerging (2 of 2) sys-libs/glibc-2.19-r1
>>> Installing (2 of 2) sys-libs/glibc-2.19-r1
* Messages for package sys-libs/timezone-data-2014j:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2 to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/libc sys-devel/gnuconfig app-arch/bzip2 sys-devel/make sys-apps/net-tools sys-devel/gcc sys-apps/gawk virtual/pkgconfig sys-devel/autoconf net-misc/wget sys-apps/file virtual/package-manager sys-devel/flex virtual/editor app-arch/xz-utils app-shells/bash sys-apps/diffutils sys-apps/sed sys-devel/libtool sys-devel/automake sys-devel/patch net-misc/rsync sys-apps/baselayout virtual/os-headers app-arch/gzip sys-apps/findutils sys-apps/grep app-arch/tar sys-apps/coreutils sys-devel/bison sys-devel/gettext sys-apps/makedev sys-apps/less sys-apps/which sys-devel/binutils virtual/shadow
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014j to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.1-r4 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.8-r2 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-devel/libtool-2.4.2-r1::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(dev-libs/libltdl-2.4.4::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20150301/.catalyst_lock'
Full build log at /tmp/catalyst-auto.JzBgfE/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2015-02-22 11:34 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2015-02-22 11:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20150222/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20150222/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ppc-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ppc-20150222/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20150222/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
tar: XATTR support is not available
tar: SELinux support is not available
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20150222/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc-20150222///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150222//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150222//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc-20150222/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-libs/timezone-data-2014j
>>> Installing (1 of 2) sys-libs/timezone-data-2014j
>>> Emerging (2 of 2) sys-libs/glibc-2.19-r1
>>> Installing (2 of 2) sys-libs/glibc-2.19-r1
* Messages for package sys-libs/timezone-data-2014j:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2 to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-shells/bash sys-apps/diffutils app-arch/bzip2 sys-devel/gettext sys-devel/autoconf net-misc/rsync sys-apps/sed sys-devel/bison app-arch/gzip sys-devel/automake virtual/shadow virtual/os-headers sys-devel/libtool sys-apps/gawk sys-devel/binutils sys-apps/coreutils sys-apps/file sys-apps/grep sys-apps/findutils sys-devel/gnuconfig sys-devel/patch app-arch/xz-utils net-misc/wget app-arch/tar virtual/editor virtual/package-manager sys-devel/make sys-apps/which sys-devel/gcc virtual/pkgconfig sys-apps/baselayout virtual/libc sys-apps/makedev sys-devel/flex sys-apps/net-tools sys-apps/less
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014j to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.1-r4 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.8-r2 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.18.3.2 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.4::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20150222/.catalyst_lock'
Full build log at /tmp/catalyst-auto.G3MljJ/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2015-02-08 11:17 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2015-02-08 11:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/metadata.xml': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/files/20_mod_diagnostics.conf': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/files': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/files': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/mod_diagnostics-0.0.1.ebuild': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/Manifest': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc/ChangeLog': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc/metadata.xml': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc/mod_xml2enc-1.0.3.ebuild': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc/Manifest': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/mod_perl-2.0.8.ebuild': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/mod_perl-2.0.7-r1.ebuild': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/ChangeLog': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/metadata.xml': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/2.0.3/apache2-mod_perl-startup.pl': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/2.0.3/75_mod_perl.conf': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/2.0.3': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/2.0.3': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/mod_perl-2.0.7-bundled-Apache-Test.patch': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/mod_perl-2.0.1-sneak-tmpdir.patch': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/mod_perl-2.0.8-bundled-Apache-Test.patch': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/Manifest': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage': Operation not supported
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20150208/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc-20150208///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150208//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150208//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc-20150208/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2 to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/make sys-devel/flex app-arch/xz-utils net-misc/rsync sys-apps/sed virtual/package-manager sys-devel/gcc sys-apps/gawk sys-devel/autoconf virtual/pkgconfig virtual/editor virtual/shadow sys-devel/gnuconfig sys-apps/findutils sys-devel/bison sys-apps/file sys-devel/binutils net-misc/wget app-arch/tar sys-devel/gettext sys-apps/net-tools sys-apps/diffutils app-arch/bzip2 app-shells/bash sys-devel/patch app-arch/gzip sys-apps/which sys-apps/baselayout sys-devel/libtool virtual/os-headers sys-devel/automake sys-apps/grep sys-apps/coreutils sys-apps/makedev sys-apps/less virtual/libc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014i-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.18.2-r2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.8-r2 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.18.3.2 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-devel/libtool-2.4.2-r1::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(dev-libs/libltdl-2.4.4::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20150208/.catalyst_lock'
Full build log at /tmp/catalyst-auto.4IOSxw/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2015-02-01 11:22 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2015-02-01 11:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/metadata.xml': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/files/20_mod_diagnostics.conf': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/files': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/files': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/mod_diagnostics-0.0.1.ebuild': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics/Manifest': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_diagnostics': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc/ChangeLog': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc/metadata.xml': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc/mod_xml2enc-1.0.3.ebuild': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc/Manifest': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_xml2enc': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/mod_perl-2.0.8.ebuild': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/mod_perl-2.0.7-r1.ebuild': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/ChangeLog': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/metadata.xml': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/2.0.3/apache2-mod_perl-startup.pl': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/2.0.3/75_mod_perl.conf': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/2.0.3': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/2.0.3': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/mod_perl-2.0.7-bundled-Apache-Test.patch': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/mod_perl-2.0.1-sneak-tmpdir.patch': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files/mod_perl-2.0.8-bundled-Apache-Test.patch': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/files': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl/Manifest': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache/mod_perl': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage/www-apache': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage': Operation not supported
tar: acl_set_file_at: Cannot set POSIX ACLs for file 'portage': Operation not supported
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20150201/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc-20150201///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150201//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20150201//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc-20150201/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2 to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/make sys-apps/grep sys-apps/findutils app-arch/gzip sys-devel/patch sys-apps/diffutils sys-apps/makedev sys-devel/gcc sys-apps/less virtual/package-manager app-arch/bzip2 sys-apps/net-tools sys-devel/binutils sys-devel/gettext net-misc/wget sys-apps/file sys-apps/which virtual/pkgconfig virtual/libc app-arch/xz-utils virtual/os-headers sys-devel/flex sys-apps/coreutils sys-apps/sed virtual/editor sys-apps/gawk sys-devel/bison sys-devel/autoconf sys-devel/libtool net-misc/rsync sys-devel/automake sys-apps/baselayout app-arch/tar app-shells/bash sys-devel/gnuconfig virtual/shadow
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014i-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.18.2-r2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.8-r2 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.18.3.2 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.4::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20150201/.catalyst_lock'
Full build log at /tmp/catalyst-auto.pYXwlu/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2014-09-28 10:17 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2014-09-28 10:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20140928/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20140928/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20140928/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20140928/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ppc-latest.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ppc-20140928/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20140928/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20140928/.catalyst_lock'
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc-20140928///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20140928//tmp
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20140928//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc-20140928/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --oneshot --nodeps --update sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.8-r2
>>> Installing (1 of 1) sys-apps/portage-2.2.8-r2
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
!!! The following installed packages are masked:
- dev-lang/perl-5.16.3::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Andreas K. Huettel <dilfridge@gentoo.org> (27 Sep 2014)
# Masked for removal in 30 days; see e.g. bug 446376
# Please upgrade to stable Perl 5.18
- virtual/perl-ExtUtils-Install-1.580.0-r1::gentoo (masked by: package.mask)
- virtual/perl-File-Temp-0.220.0-r3::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2 to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/automake sys-apps/baselayout virtual/shadow sys-apps/coreutils sys-apps/makedev app-arch/xz-utils virtual/pkgconfig sys-apps/net-tools sys-apps/diffutils app-arch/bzip2 app-shells/bash sys-devel/patch net-misc/wget app-arch/tar sys-devel/gettext virtual/os-headers sys-devel/libtool sys-apps/grep app-arch/gzip sys-apps/which sys-devel/bison sys-devel/gnuconfig sys-apps/gawk virtual/editor sys-devel/binutils sys-apps/findutils net-misc/rsync sys-devel/flex sys-devel/make sys-devel/autoconf virtual/package-manager sys-devel/gcc virtual/libc sys-apps/file sys-apps/sed sys-apps/less
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.17 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014f to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.6.1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-3.82-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.7 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.23.2 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild U ] dev-lang/perl-5.18.2-r1 [5.16.3]
[ebuild N ] sys-kernel/linux-headers-3.13 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.2-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.18.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p49 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.16 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.14 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.16 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.7.3-r1 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.1-r4 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.18.3.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.7 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.8-r2 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-lang/perl:0
(dev-lang/perl-5.18.2-r1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(dev-lang/perl-5.16.3::gentoo, installed) pulled in by
dev-lang/perl:0/5.16=[-build(-)] required by (dev-perl/Locale-gettext-1.50.0-r1::gentoo, installed)
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20140928/.catalyst_lock'
Full build log at /tmp/catalyst-auto.aw1YVI/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-09-18 11:03 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-09-18 11:03 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
powerpc-unknown-linux-gnu-gcc ../sysdeps/unix/sysv/linux/mq_send.c -c -std=gnu99 -fgnu89-inline -O2 -Wall -Winline -Wwrite-strings -fmerge-all-constants -fno-strict-aliasing -fno-unwind-tables -freorder-blocks -mcpu=powerpc -mtune=powerpc -pipe -mnew-mnemonics -Wstrict-prototypes -mlong-double-128 -fpic -fexceptions -I../include -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl -I../sysdeps/powerpc/powerpc32/elf -I../sysdeps/powerpc/elf -I../sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu -I../sysdeps/powerpc/powerpc32/fpu -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../ports/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../nptl/sysdeps/unix/sysv/linux/powerpc -I../ports/sysdeps/unix/sysv/linux/powerpc -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldbl-128ibm -I../sysdeps/ieee
754/ldbl-opt -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread -I../sysdeps/pthread -I../ports/sysdeps/unix/sysv/linux -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../nptl/sysdeps/unix/sysv -I../ports/sysdeps/unix/sysv -I../sysdeps/unix/sysv -I../sysdeps/unix/powerpc -I../nptl/sysdeps/unix -I../ports/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/powerpc/powerpc32 -I../sysdeps/wordsize-32 -I../sysdeps/powerpc/fpu -I../nptl/sysdeps/powerpc -I../ports/sysdeps/powerpc -I../sysdeps/powerpc -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I../ports -I.. -I../libio -I. -nostdinc -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include-fixed -isystem /usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h -DPIC -DSHARED -D
NOT_IN_libc=1 -DIS_IN_librt=1 -U_FORTIFY_SOURCE -U_FORTIFY_SOURC
E -o /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_send.os -MD -MP -MF /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_send.os.dt -MT /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_send.os
powerpc-unknown-linux-gnu-gcc ../sysdeps/unix/sysv/linux/mq_receive.c -c -std=gnu99 -fgnu89-inline -O2 -Wall -Winline -Wwrite-strings -fmerge-all-constants -fno-strict-aliasing -fno-unwind-tables -freorder-blocks -mcpu=powerpc -mtune=powerpc -pipe -mnew-mnemonics -Wstrict-prototypes -mlong-double-128 -fpic -fexceptions -I../include -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl -I../sysdeps/powerpc/powerpc32/elf -I../sysdeps/powerpc/elf -I../sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu -I../sysdeps/powerpc/powerpc32/fpu -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../ports/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../nptl/sysdeps/unix/sysv/linux/powerpc -I../ports/sysdeps/unix/sysv/linux/powerpc -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldbl-128ibm -I../sysdeps/i
eee754/ldbl-opt -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread -I../sysdeps/pthread -I../ports/sysdeps/unix/sysv/linux -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../nptl/sysdeps/unix/sysv -I../ports/sysdeps/unix/sysv -I../sysdeps/unix/sysv -I../sysdeps/unix/powerpc -I../nptl/sysdeps/unix -I../ports/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/powerpc/powerpc32 -I../sysdeps/wordsize-32 -I../sysdeps/powerpc/fpu -I../nptl/sysdeps/powerpc -I../ports/sysdeps/powerpc -I../sysdeps/powerpc -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I../ports -I.. -I../libio -I. -nostdinc -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include-fixed -isystem /usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h -DPIC -DSHARED
-DNOT_IN_libc=1 -DIS_IN_librt=1 -U_FORTIFY_SOURCE -U_FORTIFY_SO
URCE -o /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_receive.os -MD -MP -MF /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_receive.os.dt -MT /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_receive.os
(echo '#define SYSCALL_NAME mq_timedsend'; \
echo '#define SYSCALL_NARGS 5'; \
echo '#define SYSCALL_SYMBOL __GI_mq_timedsend'; \
echo '#define SYSCALL_CANCELLABLE 1'; \
echo '#include <syscall-template.S>'; \
echo 'weak_alias (__GI_mq_timedsend, mq_timedsend)'; \
echo 'libc_hidden_weak (mq_timedsend)'; \
) | powerpc-unknown-linux-gnu-gcc -c -I../include -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl -I../sysdeps/powerpc/powerpc32/elf -I../sysdeps/powerpc/elf -I../sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu -I../sysdeps/powerpc/powerpc32/fpu -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../ports/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../nptl/sysdeps/unix/sysv/linux/powerpc -I../ports/sysdeps/unix/sysv/linux/powerpc -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldbl-128ibm -I../sysdeps/ieee754/ldbl-opt -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread -I../sysdeps/pthread -I../ports/sysdeps/unix/sysv/linux -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../nptl/sysdeps/unix/sysv -I../port
s/sysdeps/unix/sysv -I../sysdeps/unix/sysv -I../sysdeps/unix/powerpc -I../nptl/sysdeps/unix -I../ports/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/powerpc/powerpc32 -I../sysdeps/wordsize-32 -I../sysdeps/powerpc/fpu -I../nptl/sysdeps/powerpc -I../ports/sysdeps/powerpc -I../sysdeps/powerpc -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I../ports -I.. -I../libio -I. -nostdinc -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include-fixed -isystem /usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h -DPIC -DSHARED -DNOT_IN_libc=1 -DIS_IN_librt=1 -U_FORTIFY_SOURCE -U_FORTIFY_SOURCE -DASSEMBLER -Wa,--noexecstack -Wa,--noexecstack -o /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_timedsend.os -x assembler-with-cpp - -MD -MP -MF /var/tmp/porta
ge/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-g
nu-nptl/rt/mq_timedsend.os.dt -MT /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_timedsend.os
(echo '#define SYSCALL_NAME mq_timedreceive'; \
echo '#define SYSCALL_NARGS 5'; \
echo '#define SYSCALL_SYMBOL __GI_mq_timedreceive'; \
echo '#define SYSCALL_CANCELLABLE 1'; \
echo '#include <syscall-template.S>'; \
echo 'weak_alias (__GI_mq_timedreceive, mq_timedreceive)'; \
echo 'libc_hidden_weak (mq_timedreceive)'; \
) | powerpc-unknown-linux-gnu-gcc -c -I../include -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl -I../sysdeps/powerpc/powerpc32/elf -I../sysdeps/powerpc/elf -I../sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu -I../sysdeps/powerpc/powerpc32/fpu -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../ports/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../nptl/sysdeps/unix/sysv/linux/powerpc -I../ports/sysdeps/unix/sysv/linux/powerpc -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldbl-128ibm -I../sysdeps/ieee754/ldbl-opt -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread -I../sysdeps/pthread -I../ports/sysdeps/unix/sysv/linux -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../nptl/sysdeps/unix/sysv -I../port
s/sysdeps/unix/sysv -I../sysdeps/unix/sysv -I../sysdeps/unix/powerpc -I../nptl/sysdeps/unix -I../ports/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/powerpc/powerpc32 -I../sysdeps/wordsize-32 -I../sysdeps/powerpc/fpu -I../nptl/sysdeps/powerpc -I../ports/sysdeps/powerpc -I../sysdeps/powerpc -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I../ports -I.. -I../libio -I. -nostdinc -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include-fixed -isystem /usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h -DPIC -DSHARED -DNOT_IN_libc=1 -DIS_IN_librt=1 -U_FORTIFY_SOURCE -U_FORTIFY_SOURCE -DASSEMBLER -Wa,--noexecstack -Wa,--noexecstack -o /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_timedreceive.os -x assembler-with-cpp - -MD -MP -MF /var/tmp/po
rtage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linu
x-gnu-nptl/rt/mq_timedreceive.os.dt -MT /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/mq_timedreceive.os
powerpc-unknown-linux-gnu-gcc ../sysdeps/unix/sysv/linux/powerpc/rt-sysdep.c -c -std=gnu99 -fgnu89-inline -O2 -Wall -Winline -Wwrite-strings -fmerge-all-constants -fno-strict-aliasing -fno-unwind-tables -freorder-blocks -mcpu=powerpc -mtune=powerpc -pipe -mnew-mnemonics -Wstrict-prototypes -mlong-double-128 -fpic -I../include -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl -I../sysdeps/powerpc/powerpc32/elf -I../sysdeps/powerpc/elf -I../sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu -I../sysdeps/powerpc/powerpc32/fpu -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../ports/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../nptl/sysdeps/unix/sysv/linux/powerpc -I../ports/sysdeps/unix/sysv/linux/powerpc -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldbl-128ibm -I../sysdeps/ieee75
4/ldbl-opt -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread -I../sysdeps/pthread -I../ports/sysdeps/unix/sysv/linux -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../nptl/sysdeps/unix/sysv -I../ports/sysdeps/unix/sysv -I../sysdeps/unix/sysv -I../sysdeps/unix/powerpc -I../nptl/sysdeps/unix -I../ports/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/powerpc/powerpc32 -I../sysdeps/wordsize-32 -I../sysdeps/powerpc/fpu -I../nptl/sysdeps/powerpc -I../ports/sysdeps/powerpc -I../sysdeps/powerpc -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I../ports -I.. -I../libio -I. -nostdinc -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include-fixed -isystem /usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h -DPIC -DSHARED -DNO
T_IN_libc=1 -DIS_IN_librt=1 -U_FORTIFY_SOURCE -U_FORTIFY_SOURCE
-o /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/rt-sysdep.os -MD -MP -MF /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/rt-sysdep.os.dt -MT /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/rt-sysdep.os
powerpc-unknown-linux-gnu-gcc ../nptl/sysdeps/unix/sysv/linux/timer_routines.c -c -std=gnu99 -fgnu89-inline -O2 -Wall -Winline -Wwrite-strings -fmerge-all-constants -fno-strict-aliasing -fno-unwind-tables -freorder-blocks -mcpu=powerpc -mtune=powerpc -pipe -mnew-mnemonics -Wstrict-prototypes -mlong-double-128 -fpic -I../include -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl -I../sysdeps/powerpc/powerpc32/elf -I../sysdeps/powerpc/elf -I../sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu -I../sysdeps/powerpc/powerpc32/fpu -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../ports/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../nptl/sysdeps/unix/sysv/linux/powerpc -I../ports/sysdeps/unix/sysv/linux/powerpc -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldbl-128ibm -I../sysdeps/ieee
754/ldbl-opt -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread -I../sysdeps/pthread -I../ports/sysdeps/unix/sysv/linux -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../nptl/sysdeps/unix/sysv -I../ports/sysdeps/unix/sysv -I../sysdeps/unix/sysv -I../sysdeps/unix/powerpc -I../nptl/sysdeps/unix -I../ports/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/powerpc/powerpc32 -I../sysdeps/wordsize-32 -I../sysdeps/powerpc/fpu -I../nptl/sysdeps/powerpc -I../ports/sysdeps/powerpc -I../sysdeps/powerpc -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I../ports -I.. -I../libio -I. -nostdinc -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include-fixed -isystem /usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h -DPIC -DSHARED -D
NOT_IN_libc=1 -DIS_IN_librt=1 -U_FORTIFY_SOURCE -U_FORTIFY_SOURC
E -o /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/timer_routines.os -MD -MP -MF /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/timer_routines.os.dt -MT /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/timer_routines.os
powerpc-unknown-linux-gnu-gcc ../nptl/sysdeps/pthread/librt-cancellation.c -c -std=gnu99 -fgnu89-inline -O2 -Wall -Winline -Wwrite-strings -fmerge-all-constants -fno-strict-aliasing -fno-unwind-tables -freorder-blocks -mcpu=powerpc -mtune=powerpc -pipe -mnew-mnemonics -Wstrict-prototypes -mlong-double-128 -fpic -fasynchronous-unwind-tables -I../include -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl -I../sysdeps/powerpc/powerpc32/elf -I../sysdeps/powerpc/elf -I../sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu -I../sysdeps/powerpc/powerpc32/fpu -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../ports/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../nptl/sysdeps/unix/sysv/linux/powerpc -I../ports/sysdeps/unix/sysv/linux/powerpc -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldbl-
128ibm -I../sysdeps/ieee754/ldbl-opt -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread -I../sysdeps/pthread -I../ports/sysdeps/unix/sysv/linux -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../nptl/sysdeps/unix/sysv -I../ports/sysdeps/unix/sysv -I../sysdeps/unix/sysv -I../sysdeps/unix/powerpc -I../nptl/sysdeps/unix -I../ports/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/powerpc/powerpc32 -I../sysdeps/wordsize-32 -I../sysdeps/powerpc/fpu -I../nptl/sysdeps/powerpc -I../ports/sysdeps/powerpc -I../sysdeps/powerpc -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I../ports -I.. -I../libio -I. -nostdinc -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include-fixed -isystem /usr/include -D_LIBC_REENTRANT -include ../include/libc-symb
ols.h -DPIC -DSHARED -DNOT_IN_libc=1 -DIS_IN_librt=1 -U_FORTIFY
_SOURCE -U_FORTIFY_SOURCE -o /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt-cancellation.os -MD -MP -MF /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt-cancellation.os.dt -MT /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt-cancellation.os
powerpc-unknown-linux-gnu-gcc ../sysdeps/gnu/rt-unwind-resume.c -c -std=gnu99 -fgnu89-inline -O2 -Wall -Winline -Wwrite-strings -fmerge-all-constants -fno-strict-aliasing -fno-unwind-tables -freorder-blocks -mcpu=powerpc -mtune=powerpc -pipe -mnew-mnemonics -Wstrict-prototypes -mlong-double-128 -fpic -fexceptions -fasynchronous-unwind-tables -I../include -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt -I/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl -I../sysdeps/powerpc/powerpc32/elf -I../sysdeps/powerpc/elf -I../sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu -I../sysdeps/powerpc/powerpc32/fpu -I../nptl/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../ports/sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../sysdeps/unix/sysv/linux/powerpc/powerpc32 -I../nptl/sysdeps/unix/sysv/linux/powerpc -I../ports/sysdeps/unix/sysv/linux/powerpc -I../sysdeps/unix/sysv/linux/powerpc -I../sysdeps/ieee754/ldb
l-128ibm -I../sysdeps/ieee754/ldbl-opt -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread -I../sysdeps/pthread -I../ports/sysdeps/unix/sysv/linux -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../nptl/sysdeps/unix/sysv -I../ports/sysdeps/unix/sysv -I../sysdeps/unix/sysv -I../sysdeps/unix/powerpc -I../nptl/sysdeps/unix -I../ports/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/powerpc/powerpc32 -I../sysdeps/wordsize-32 -I../sysdeps/powerpc/fpu -I../nptl/sysdeps/powerpc -I../ports/sysdeps/powerpc -I../sysdeps/powerpc -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I../ports -I.. -I../libio -I. -nostdinc -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include -isystem /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/include-fixed -isystem /usr/include -D_LIBC_REENTRANT -include ../include/libc-sy
mbols.h -DPIC -DSHARED -DNOT_IN_libc=1 -DIS_IN_librt=1 -U_FORTI
FY_SOURCE -U_FORTIFY_SOURCE -o /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/rt-unwind-resume.os -MD -MP -MF /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/rt-unwind-resume.os.dt -MT /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/rt-unwind-resume.os
cd /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt && /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/../../../../powerpc-unknown-linux-gnu/bin/ar cruv librt.a aio_cancel.o aio_error.o aio_fsync.o aio_misc.o aio_read.o aio_read64.o aio_return.o aio_suspend.o aio_write.o aio_write64.o lio_listio.o lio_listio64.o aio_sigqueue.o aio_notify.o get_clockfreq.o clock_getcpuclockid.o clock_getres.o clock_gettime.o clock_settime.o clock_nanosleep.o timer_create.o timer_delete.o timer_getoverr.o timer_gettime.o timer_settime.o shm_open.o shm_unlink.o mq_open.o mq_close.o mq_unlink.o mq_getattr.o mq_setattr.o mq_notify.o mq_send.o mq_receive.o mq_timedsend.o mq_timedreceive.o rt-sysdep.o timer_routines.o librt-cancellation.o
a - aio_cancel.o
a - aio_error.o
a - aio_fsync.o
a - aio_misc.o
a - aio_read.o
a - aio_read64.o
a - aio_return.o
a - aio_suspend.o
a - aio_write.o
a - aio_write64.o
a - lio_listio.o
a - lio_listio64.o
a - aio_sigqueue.o
a - aio_notify.o
a - get_clockfreq.o
a - clock_getcpuclockid.o
a - clock_getres.o
a - clock_gettime.o
a - clock_settime.o
a - clock_nanosleep.o
a - timer_create.o
a - timer_delete.o
a - timer_getoverr.o
a - timer_gettime.o
a - timer_settime.o
a - shm_open.o
a - shm_unlink.o
a - mq_open.o
a - mq_close.o
a - mq_unlink.o
a - mq_getattr.o
a - mq_setattr.o
a - mq_notify.o
a - mq_send.o
a - mq_receive.o
a - mq_timedsend.o
a - mq_timedreceive.o
a - rt-sysdep.o
a - timer_routines.o
a - librt-cancellation.o
: /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt.a
cd /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt && /usr/lib/gcc/powerpc-unknown-linux-gnu/4.4.5/../../../../powerpc-unknown-linux-gnu/bin/ar cruv librt_pic.a aio_cancel.os aio_error.os aio_fsync.os aio_misc.os aio_read.os aio_read64.os aio_return.os aio_suspend.os aio_write.os aio_write64.os lio_listio.os lio_listio64.os aio_sigqueue.os aio_notify.os get_clockfreq.os clock_getcpuclockid.os clock_getres.os clock_gettime.os clock_settime.os clock_nanosleep.os timer_create.os timer_delete.os timer_getoverr.os timer_gettime.os timer_settime.os shm_open.os shm_unlink.os mq_open.os mq_close.os mq_unlink.os mq_getattr.os mq_setattr.os mq_notify.os mq_send.os mq_receive.os mq_timedsend.os mq_timedreceive.os rt-sysdep.os timer_routines.os librt-cancellation.os rt-unwind-resume.os
a - aio_cancel.os
a - aio_error.os
a - aio_fsync.os
a - aio_misc.os
a - aio_read.os
a - aio_read64.os
a - aio_return.os
a - aio_suspend.os
a - aio_write.os
a - aio_write64.os
a - lio_listio.os
a - lio_listio64.os
a - aio_sigqueue.os
a - aio_notify.os
a - get_clockfreq.os
a - clock_getcpuclockid.os
a - clock_getres.os
a - clock_gettime.os
a - clock_settime.os
a - clock_nanosleep.os
a - timer_create.os
a - timer_delete.os
a - timer_getoverr.os
a - timer_gettime.os
a - timer_settime.os
a - shm_open.os
a - shm_unlink.os
a - mq_open.os
a - mq_close.os
a - mq_unlink.os
a - mq_getattr.os
a - mq_setattr.os
a - mq_notify.os
a - mq_send.os
a - mq_receive.os
a - mq_timedsend.os
a - mq_timedreceive.os
a - rt-sysdep.os
a - timer_routines.os
a - librt-cancellation.os
a - rt-unwind-resume.os
: /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt_pic.a
powerpc-unknown-linux-gnu-gcc -Wl,-O1 -Wl,--as-needed -shared -static-libgcc -Wl,-O1 -Wl,-z,defs -Wl,-dynamic-linker=/lib/ld.so.1 -B/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/csu/ -Wl,--version-script=/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/librt.map -Wl,-soname=librt.so.1 -Wl,-z,combreloc -Wl,-z,relro -Wl,--hash-style=both -Wl,--enable-new-dtags,-z,nodelete -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/math -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/elf -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/dlfcn -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/nss -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-def
ault-powerpc-unknown-linux-gnu-nptl/nis -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/resolv -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/crypt -L/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/nptl -Wl,-rpath-link=/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl:/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/math:/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/elf:/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/dlfcn:/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/nss:/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-
nptl/nis:/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-
powerpc-unknown-linux-gnu-nptl/rt:/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/resolv:/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/crypt:/var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/nptl -o /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt.so -T /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/shlib.lds /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/csu/abi-note.o -Wl,--whole-archive /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt_pic.a -Wl,--no-whole-archive /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/elf/interp.os /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/libc.so /var/tmp/porta
ge/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/libc_nonshared.a /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/nptl/libpthread_nonshared.a /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/nptl/libpthread.so /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/elf/ld.so
rm -f /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt.so.1.new
/bin/sh ../scripts/rellns-sh /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt.so /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt.so.1.new
mv -f /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt.so.1.new /var/tmp/portage/sys-libs/glibc-2.12.2/work/build-default-powerpc-unknown-linux-gnu-nptl/rt/librt.so.1
make[2]: Leaving directory `/var/tmp/portage/sys-libs/glibc-2.12.2/work/glibc-2.12.2/rt'
make subdir=conform -C conform ..=../ others
make[2]: Entering directory `/var/tmp/portage/sys-libs/glibc-2.12.2/work/glibc-2.12.2/conform'
make[2]: Nothing to be done for `others'.
make[2]: Leaving directory `/var/tmp/portage/sys-libs/glibc-2.12.2/work/glibc-2.12.2/conform'
make subdir=debug -C debug ..=../ others
make[2]: Entering directory `/var/tmp/portage/sys-libs/glibc-2.12.2/work/glibc-2.12.2/debug'
make[1]: *** [debug/others] Segmentation fault
make[1]: Leaving directory `/var/tmp/portage/sys-libs/glibc-2.12.2/work/glibc-2.12.2'
make: *** [all] Error 2
make: INTERNAL: Exiting with 13 jobserver tokens available; should be 16!
emake failed
* ERROR: sys-libs/glibc-2.12.2 failed (compile phase):
* make for default failed
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 3808: Called eblit-run 'src_compile'
* environment, line 1216: Called eblit-glibc-src_compile
* src_compile.eblit, line 212: Called toolchain-glibc_src_compile
* src_compile.eblit, line 124: Called die
* The specific snippet of code:
* emake || die "make for ${ABI} failed"
*
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.12.2',
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.12.2'.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.12.2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.12.2/temp/environment'.
* S: '/var/tmp/portage/sys-libs/glibc-2.12.2/work/glibc-2.12.2'
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/timezone-data-2011e merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-libs/glibc-2.12.2 merged to /tmp/stage1root/:
* ERROR: sys-libs/glibc-2.12.2 failed (compile phase):
* make for default failed
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 3808: Called eblit-run 'src_compile'
* environment, line 1216: Called eblit-glibc-src_compile
* src_compile.eblit, line 212: Called toolchain-glibc_src_compile
* src_compile.eblit, line 124: Called die
* The specific snippet of code:
* emake || die "make for ${ABI} failed"
*
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.12.2',
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.12.2'.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.12.2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.12.2/temp/environment'.
* S: '/var/tmp/portage/sys-libs/glibc-2.12.2/work/glibc-2.12.2'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20110918/.catalyst_lock'
Full build log at /tmp/catalyst-auto.767/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-09-04 10:18 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-09-04 10:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for powerpc
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110904/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110904/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ppc-20110904/tmp/stage1root
!!! catalyst: Cannot locate specified source_path: /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 207, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 173, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 573, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.12193/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-08-28 10:16 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-08-28 10:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for powerpc
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110828/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110828/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ppc-20110828/tmp/stage1root
!!! catalyst: Cannot locate specified source_path: /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 207, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 173, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 573, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.15802/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-08-21 10:19 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-08-21 10:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for powerpc
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110821/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110821/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ppc-20110821/tmp/stage1root
!!! catalyst: Cannot locate specified source_path: /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 207, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 173, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 573, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.30910/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-08-14 10:24 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-08-14 10:24 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for powerpc
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110814/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110814/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ppc-20110814/tmp/stage1root
!!! catalyst: Cannot locate specified source_path: /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 207, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 173, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 573, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.7191/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-08-07 10:26 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-08-07 10:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for powerpc
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110807/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110807/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ppc-20110807/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ppc-20110807/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ppc-20110807/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110807/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110807/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20110807/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110807/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20110807/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ppc-20110807/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20110807/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20110807/.catalyst_lock'
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc-20110807///tmp/stage1root/etc
copying make.profile to /var/tmp/catalyst/tmp/default/stage1-ppc-20110807///tmp/stage1root/etc
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20110807/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20110807/tmp/
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc-20110807/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.0.3 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.0.3 to /tmp/stage1root/
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep >=sys-devel/binutils-2.18-r1 app-shells/bash sys-apps/net-tools sys-devel/patch sys-devel/flex sys-apps/gawk app-arch/tar sys-apps/sed sys-fs/udev sys-devel/bison sys-apps/texinfo sys-apps/file app-arch/bzip2 virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/shadow sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less >=sys-apps/baselayout-1.12.10-r5 virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[nomerge ] virtual/package-manager-0 to /tmp/stage1root/
[nomerge ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 -python3 (-selinux)" LINGUAS="-pl"
[nomerge ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml"
[nomerge ] dev-util/pkgconfig-0.26 USE="-hardened"
[ebuild N ] dev-libs/glib-2.28.6 USE="-debug -doc -fam (-introspection) (-selinux) -static-libs -test -xattr" 7,180 kB
[ebuild N ] dev-util/gtk-doc-am-1.16 0 kB
[ebuild N ] dev-util/pkgconfig-0.26 USE="-hardened" 0 kB
[nomerge ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml"
[nomerge ] app-admin/python-updater-0.9 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.1.3-r1 to /tmp/stage1root/ USE="build (wide-unicode) -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml" 0 kB
[ebuild N ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml" 0 kB
[ebuild N ] app-admin/python-updater-0.9 to /tmp/stage1root/ 0 kB
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ 0 kB
[ebuild N ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 -python3 (-selinux)" LINGUAS="-pl" 814 kB
Total: 8 packages (8 new), Size of downloads: 7,994 kB
* Error: circular dependencies:
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) depends on
(dev-util/pkgconfig-0.26, ebuild scheduled for merge) (buildtime)
(dev-libs/glib-2.28.6, ebuild scheduled for merge) (buildtime)
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20110807/.catalyst_lock'
Full build log at /tmp/catalyst-auto.6648/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-07-31 10:31 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-07-31 10:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for powerpc
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110731/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110731/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ppc-20110731/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ppc-20110731/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ppc-20110731/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110731/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110731/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20110731/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110731/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20110731/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ppc-20110731/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20110731/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20110731/.catalyst_lock'
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc-20110731///tmp/stage1root/etc
copying make.profile to /var/tmp/catalyst/tmp/default/stage1-ppc-20110731///tmp/stage1root/etc
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20110731/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20110731/tmp/
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc-20110731/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.0.3 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.0.3 to /tmp/stage1root/
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep >=sys-devel/binutils-2.18-r1 app-shells/bash sys-apps/net-tools sys-devel/patch sys-devel/flex sys-apps/gawk app-arch/tar sys-apps/sed sys-fs/udev sys-devel/bison sys-apps/texinfo sys-apps/file app-arch/bzip2 virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/shadow sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less >=sys-apps/baselayout-1.12.10-r5 virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[nomerge ] virtual/package-manager-0 to /tmp/stage1root/
[nomerge ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 -python3 (-selinux)" LINGUAS="-pl"
[nomerge ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml"
[nomerge ] dev-util/pkgconfig-0.26 USE="-hardened"
[ebuild N ] dev-libs/glib-2.28.6 USE="-debug -doc -fam (-introspection) (-selinux) -static-libs -test -xattr" 7,180 kB
[ebuild N ] dev-util/gtk-doc-am-1.16 0 kB
[ebuild N ] dev-util/pkgconfig-0.26 USE="-hardened" 0 kB
[nomerge ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml"
[nomerge ] app-admin/python-updater-0.9 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.1.3-r1 to /tmp/stage1root/ USE="build (wide-unicode) -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml" 0 kB
[ebuild N ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml" 0 kB
[ebuild N ] app-admin/python-updater-0.9 to /tmp/stage1root/ 8 kB
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ 0 kB
[ebuild N ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 -python3 (-selinux)" LINGUAS="-pl" 814 kB
Total: 8 packages (8 new), Size of downloads: 8,002 kB
* Error: circular dependencies:
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) depends on
(dev-util/pkgconfig-0.26, ebuild scheduled for merge) (buildtime)
(dev-libs/glib-2.28.6, ebuild scheduled for merge) (buildtime)
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20110731/.catalyst_lock'
Full build log at /tmp/catalyst-auto.8099/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-07-24 10:33 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-07-24 10:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.915
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/var/tmp/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume kerncache metadata_overlay pkgcache seedcache snapcache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building natively for powerpc
stage1 root path is /tmp/stage1root
Source path set to /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110724/
The autoresume path is /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110724/
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-ppc-20110724/tmp/stage1root
Location of the package cache is /var/tmp/catalyst/packages/default/stage1-ppc-20110724/
Location of the kerncache is /var/tmp/catalyst/kerncache/default/stage1-ppc-20110724/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110724/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110724/
clearing chroot ...
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20110724/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /var/tmp/catalyst/tmp/default/.autoresume-stage1-ppc-20110724/
Emptying directory /var/tmp/catalyst/tmp/default/stage1-ppc-20110724/
Starting tar extract from /var/tmp/catalyst/builds/default/stage3-ppc-2008.0.tar.bz2
to /var/tmp/catalyst/tmp/default/stage1-ppc-20110724/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Cleaning up invalid snapshot cache at
/var/tmp/catalyst/snapshot_cache/20110724/ (This can take a long time)...
Unpacking portage tree (This can take a long time) ...
lockfile does not exist '/var/tmp/catalyst/snapshot_cache/20110724/.catalyst_lock'
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /var/tmp/catalyst/tmp/default/stage1-ppc-20110724///tmp/stage1root/etc
copying make.profile to /var/tmp/catalyst/tmp/default/stage1-ppc-20110724///tmp/stage1root/etc
copying stage1-chroot.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20110724/tmp/
copying chroot-functions.sh to /var/tmp/catalyst/tmp/default/stage1-ppc-20110724/tmp/
Running stage1-chroot.sh in chroot /var/tmp/catalyst/tmp/default/stage1-ppc-20110724/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
>>> Emerging (1 of 1) sys-apps/baselayout-2.0.2 for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.0.2 to /tmp/stage1root/
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep >=sys-devel/binutils-2.18-r1 app-shells/bash sys-apps/net-tools sys-devel/patch sys-devel/flex sys-apps/gawk app-arch/tar sys-apps/sed sys-fs/udev sys-devel/bison sys-apps/texinfo sys-apps/file app-arch/bzip2 virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/shadow sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less >=sys-apps/baselayout-1.12.10-r5 virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
[nomerge ] virtual/package-manager-0 to /tmp/stage1root/
[nomerge ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 -python3 (-selinux)" LINGUAS="-pl"
[nomerge ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml"
[nomerge ] dev-util/pkgconfig-0.26 USE="-hardened"
[ebuild N ] dev-libs/glib-2.28.6 USE="-debug -doc -fam (-introspection) (-selinux) -static-libs -test -xattr" 0 kB
[ebuild N ] dev-util/gtk-doc-am-1.16 0 kB
[ebuild N ] dev-util/pkgconfig-0.26 USE="-hardened" 0 kB
[nomerge ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml"
[nomerge ] app-admin/python-updater-0.9 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.1.3-r1 to /tmp/stage1root/ USE="build (wide-unicode) -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml" 0 kB
[ebuild N ] dev-lang/python-2.7.1-r1 to /tmp/stage1root/ USE="build (wide-unicode) -berkdb -doc -examples -gdbm -ipv6 -ncurses -readline -sqlite -ssl -threads -tk -wininst -xml" 0 kB
[ebuild N ] app-admin/python-updater-0.9 to /tmp/stage1root/ 0 kB
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/ 0 kB
[ebuild N ] sys-apps/portage-2.1.10.3 to /tmp/stage1root/ USE="build (ipc) -doc -epydoc -less -python2 -python3 (-selinux)" LINGUAS="-pl" 0 kB
Total: 8 packages (8 new), Size of downloads: 0 kB
* Error: circular dependencies:
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) depends on
(dev-util/pkgconfig-0.26, ebuild scheduled for merge) (buildtime)
(dev-libs/glib-2.28.6, ebuild scheduled for merge) (buildtime)
(dev-util/gtk-doc-am-1.16, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20110724/.catalyst_lock'
Full build log at /tmp/catalyst-auto.17589/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-03-06 13:24 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-03-06 13:24 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Listing /var/tmp/portage/dev-lang/python-2.6.6-r2/image//usr/lib/python2.6/site-packages ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.6.6-r2/image//usr/lib/python2.6 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.6.6-r2/work/Python-2.6.6: \
./python -Wi -t -O /var/tmp/portage/dev-lang/python-2.6.6-r2/image//usr/lib/python2.6/compileall.py \
-d /usr/lib/python2.6/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-2.6.6-r2/image//usr/lib/python2.6/site-packages
Listing /var/tmp/portage/dev-lang/python-2.6.6-r2/image//usr/lib/python2.6/site-packages ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.6.6-r2/image//usr/lib/python2.6 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.6.6-r2/work/Python-2.6.6: \
./python -Wi -t -c "import lib2to3.pygram, lib2to3.patcomp;lib2to3.patcomp.PatternCompiler()"
* ERROR: dev-lang/python-2.6.6-r2 failed:
* emake altinstall maninstall failed
*
* Call stack:
* ebuild.sh, line 54: Called src_install
* environment, line 5670: Called die
* The specific snippet of code:
* emake DESTDIR="${D}" altinstall maninstall || die "emake altinstall maninstall failed";
*
* If you need support, post the output of 'emerge --info =dev-lang/python-2.6.6-r2',
* the complete build log and the output of 'emerge -pqv =dev-lang/python-2.6.6-r2'.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-2.6.6-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-2.6.6-r2/temp/environment'.
* S: '/var/tmp/portage/dev-lang/python-2.6.6-r2/work/Python-2.6.6'
* Messages for package sys-libs/timezone-data-2010o merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/conf.d/clock.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.4.5 merged to /tmp/stage1root/:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-apps/baselayout-1.12.14-r1 merged to /tmp/stage1root/:
* The default setting for wiping /tmp has been set to 'yes'.
* Consult /etc/conf.d/bootmisc for more information.
* Messages for package dev-lang/perl-5.12.2-r6 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root/usr/bin/ptar symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/ptar.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/ptardiff symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/ptardiff.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/shasum symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/shasum.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/cpan symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/cpanp symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/cpanp.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/cpan2dist symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/cpan2dist.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/cpanp-run-perl symlink
* Unable to establish /tmp/stage1root/usr/bin/enc2xs symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/piconv symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/instmodsh symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/config_data symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/config_data.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/corelist symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/corelist.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/pod2usage symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/podchecker symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/podselect symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/prove symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/pod2text symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/pod2text.1.bz2 symlink
* Messages for package dev-lang/perl-5.8.8-r8:
* Removing dead symlink /usr/bin/enc2xs
* Removing dead symlink /usr/share/man/man1/enc2xs.1.bz2
* Removing dead symlink /usr/bin/piconv
* Removing dead symlink /usr/share/man/man1/piconv.1.bz2
* Removing dead symlink /usr/bin/pod2usage
* Removing dead symlink /usr/share/man/man1/pod2usage.1.bz2
* Removing dead symlink /usr/bin/podchecker
* Removing dead symlink /usr/share/man/man1/podchecker.1.bz2
* Removing dead symlink /usr/bin/podselect
* Removing dead symlink /usr/share/man/man1/podselect.1.bz2
* Removing dead symlink /usr/bin/instmodsh
* Removing dead symlink /usr/share/man/man1/instmodsh.1.bz2
* Removing dead symlink /usr/bin/prove
* Removing dead symlink /usr/share/man/man1/prove.1.bz2
* Removing dead symlink /usr/bin/cpan
* Removing dead symlink /usr/share/man/man1/cpan.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink /usr/bin/pod2text
* Removing dead symlink /usr/share/man/man1/pod2text.1.bz2
* Messages for package dev-lang/perl-5.12.2-r6:
* UPDATE THE PERL MODULES:
* After updating dev-lang/perl you must reinstall
* the installed perl modules.
* Use: perl-cleaner --all
* Unable to establish /usr/bin/ptar symlink
* Unable to establish /usr/share/man/man1/ptar.1* symlink
* Unable to establish /usr/bin/ptardiff symlink
* Unable to establish /usr/share/man/man1/ptardiff.1* symlink
* Unable to establish /usr/bin/shasum symlink
* Unable to establish /usr/share/man/man1/shasum.1* symlink
* Unable to establish /usr/bin/cpan symlink
* Unable to establish /usr/share/man/man1/cpan.1* symlink
* Unable to establish /usr/bin/cpanp symlink
* Unable to establish /usr/share/man/man1/cpanp.1* symlink
* Unable to establish /usr/bin/cpan2dist symlink
* Unable to establish /usr/share/man/man1/cpan2dist.1* symlink
* Unable to establish /usr/bin/cpanp-run-perl symlink
* Unable to establish /usr/bin/enc2xs symlink
* Unable to establish /usr/share/man/man1/enc2xs.1* symlink
* Unable to establish /usr/bin/piconv symlink
* Unable to establish /usr/share/man/man1/piconv.1* symlink
* Unable to establish /usr/bin/instmodsh symlink
* Unable to establish /usr/share/man/man1/instmodsh.1* symlink
* Unable to establish /usr/bin/config_data symlink
* Unable to establish /usr/share/man/man1/config_data.1* symlink
* Unable to establish /usr/bin/corelist symlink
* Unable to establish /usr/share/man/man1/corelist.1* symlink
* Unable to establish /usr/bin/pod2usage symlink
* Unable to establish /usr/share/man/man1/pod2usage.1* symlink
* Unable to establish /usr/bin/podchecker symlink
* Unable to establish /usr/share/man/man1/podchecker.1* symlink
* Unable to establish /usr/bin/podselect symlink
* Unable to establish /usr/share/man/man1/podselect.1* symlink
* Unable to establish /usr/bin/prove symlink
* Unable to establish /usr/share/man/man1/prove.1* symlink
* Unable to establish /usr/share/man/man1/pod2man.1* symlink
* Unable to establish /usr/bin/pod2text symlink
* Unable to establish /usr/share/man/man1/pod2text.1* symlink
* Messages for package dev-libs/libxml2-2.7.8 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-2.6.6-r2 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-2.6.6-r2 failed:
* emake altinstall maninstall failed
*
* Call stack:
* ebuild.sh, line 54: Called src_install
* environment, line 5670: Called die
* The specific snippet of code:
* emake DESTDIR="${D}" altinstall maninstall || die "emake altinstall maninstall failed";
*
* If you need support, post the output of 'emerge --info =dev-lang/python-2.6.6-r2',
* the complete build log and the output of 'emerge -pqv =dev-lang/python-2.6.6-r2'.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-2.6.6-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-2.6.6-r2/temp/environment'.
* S: '/var/tmp/portage/dev-lang/python-2.6.6-r2/work/Python-2.6.6'
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20110306/.catalyst_lock'
Full build log at /tmp/catalyst-auto.27269/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread* [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec
@ 2011-02-20 13:23 catalyst
0 siblings, 0 replies; 18+ messages in thread
From: catalyst @ 2011-02-20 13:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Listing /var/tmp/portage/dev-lang/python-2.6.6-r1/image//usr/lib/python2.6/site-packages ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.6.6-r1/image//usr/lib/python2.6 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.6.6-r1/work/Python-2.6.6: \
./python -Wi -t -O /var/tmp/portage/dev-lang/python-2.6.6-r1/image//usr/lib/python2.6/compileall.py \
-d /usr/lib/python2.6/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-2.6.6-r1/image//usr/lib/python2.6/site-packages
Listing /var/tmp/portage/dev-lang/python-2.6.6-r1/image//usr/lib/python2.6/site-packages ...
PYTHONPATH=/var/tmp/portage/dev-lang/python-2.6.6-r1/image//usr/lib/python2.6 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-2.6.6-r1/work/Python-2.6.6: \
./python -Wi -t -c "import lib2to3.pygram, lib2to3.patcomp;lib2to3.patcomp.PatternCompiler()"
* ERROR: dev-lang/python-2.6.6-r1 failed:
* emake altinstall maninstall failed
*
* Call stack:
* ebuild.sh, line 54: Called src_install
* environment, line 5734: Called die
* The specific snippet of code:
* emake DESTDIR="${D}" altinstall maninstall || die "emake altinstall maninstall failed";
*
* If you need support, post the output of 'emerge --info =dev-lang/python-2.6.6-r1',
* the complete build log and the output of 'emerge -pqv =dev-lang/python-2.6.6-r1'.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-2.6.6-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-2.6.6-r1/temp/environment'.
* S: '/var/tmp/portage/dev-lang/python-2.6.6-r1/work/Python-2.6.6'
* Messages for package sys-libs/timezone-data-2010o merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/conf.d/clock.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-4.4.5 merged to /tmp/stage1root/:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* http://www.gentoo.org/doc/en/gcc-upgrading.xml
* Messages for package sys-apps/baselayout-1.12.14-r1 merged to /tmp/stage1root/:
* The default setting for wiping /tmp has been set to 'yes'.
* Consult /etc/conf.d/bootmisc for more information.
* Messages for package dev-lang/perl-5.12.2-r6 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root/usr/bin/ptar symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/ptar.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/ptardiff symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/ptardiff.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/shasum symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/shasum.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/cpan symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/cpanp symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/cpanp.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/cpan2dist symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/cpan2dist.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/cpanp-run-perl symlink
* Unable to establish /tmp/stage1root/usr/bin/enc2xs symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/piconv symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/instmodsh symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/config_data symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/config_data.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/corelist symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/corelist.1* symlink
* Unable to establish /tmp/stage1root/usr/bin/pod2usage symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/podchecker symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/podselect symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/prove symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root/usr/bin/pod2text symlink
* Unable to establish /tmp/stage1root/usr/share/man/man1/pod2text.1.bz2 symlink
* Messages for package dev-lang/perl-5.8.8-r8:
* Removing dead symlink /usr/bin/enc2xs
* Removing dead symlink /usr/share/man/man1/enc2xs.1.bz2
* Removing dead symlink /usr/bin/piconv
* Removing dead symlink /usr/share/man/man1/piconv.1.bz2
* Removing dead symlink /usr/bin/pod2usage
* Removing dead symlink /usr/share/man/man1/pod2usage.1.bz2
* Removing dead symlink /usr/bin/podchecker
* Removing dead symlink /usr/share/man/man1/podchecker.1.bz2
* Removing dead symlink /usr/bin/podselect
* Removing dead symlink /usr/share/man/man1/podselect.1.bz2
* Removing dead symlink /usr/bin/instmodsh
* Removing dead symlink /usr/share/man/man1/instmodsh.1.bz2
* Removing dead symlink /usr/bin/prove
* Removing dead symlink /usr/share/man/man1/prove.1.bz2
* Removing dead symlink /usr/bin/cpan
* Removing dead symlink /usr/share/man/man1/cpan.1.bz2
* Removing dead symlink /usr/share/man/man1/pod2man.1.bz2
* Removing dead symlink /usr/bin/pod2text
* Removing dead symlink /usr/share/man/man1/pod2text.1.bz2
* Messages for package dev-lang/perl-5.12.2-r6:
* UPDATE THE PERL MODULES:
* After updating dev-lang/perl you must reinstall
* the installed perl modules.
* Use: perl-cleaner --all
* Unable to establish /usr/bin/ptar symlink
* Unable to establish /usr/share/man/man1/ptar.1* symlink
* Unable to establish /usr/bin/ptardiff symlink
* Unable to establish /usr/share/man/man1/ptardiff.1* symlink
* Unable to establish /usr/bin/shasum symlink
* Unable to establish /usr/share/man/man1/shasum.1* symlink
* Unable to establish /usr/bin/cpan symlink
* Unable to establish /usr/share/man/man1/cpan.1* symlink
* Unable to establish /usr/bin/cpanp symlink
* Unable to establish /usr/share/man/man1/cpanp.1* symlink
* Unable to establish /usr/bin/cpan2dist symlink
* Unable to establish /usr/share/man/man1/cpan2dist.1* symlink
* Unable to establish /usr/bin/cpanp-run-perl symlink
* Unable to establish /usr/bin/enc2xs symlink
* Unable to establish /usr/share/man/man1/enc2xs.1* symlink
* Unable to establish /usr/bin/piconv symlink
* Unable to establish /usr/share/man/man1/piconv.1* symlink
* Unable to establish /usr/bin/instmodsh symlink
* Unable to establish /usr/share/man/man1/instmodsh.1* symlink
* Unable to establish /usr/bin/config_data symlink
* Unable to establish /usr/share/man/man1/config_data.1* symlink
* Unable to establish /usr/bin/corelist symlink
* Unable to establish /usr/share/man/man1/corelist.1* symlink
* Unable to establish /usr/bin/pod2usage symlink
* Unable to establish /usr/share/man/man1/pod2usage.1* symlink
* Unable to establish /usr/bin/podchecker symlink
* Unable to establish /usr/share/man/man1/podchecker.1* symlink
* Unable to establish /usr/bin/podselect symlink
* Unable to establish /usr/share/man/man1/podselect.1* symlink
* Unable to establish /usr/bin/prove symlink
* Unable to establish /usr/share/man/man1/prove.1* symlink
* Unable to establish /usr/share/man/man1/pod2man.1* symlink
* Unable to establish /usr/bin/pod2text symlink
* Unable to establish /usr/share/man/man1/pod2text.1* symlink
* Messages for package dev-libs/libxml2-2.7.8 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-2.6.6-r1 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-2.6.6-r1 failed:
* emake altinstall maninstall failed
*
* Call stack:
* ebuild.sh, line 54: Called src_install
* environment, line 5734: Called die
* The specific snippet of code:
* emake DESTDIR="${D}" altinstall maninstall || die "emake altinstall maninstall failed";
*
* If you need support, post the output of 'emerge --info =dev-lang/python-2.6.6-r1',
* the complete build log and the output of 'emerge -pqv =dev-lang/python-2.6.6-r1'.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-2.6.6-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-2.6.6-r1/temp/environment'.
* S: '/var/tmp/portage/dev-lang/python-2.6.6-r1/work/Python-2.6.6'
* IMPORTANT: 1 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/var/tmp/catalyst/tmp/default/stage1-ppc-20110220/.catalyst_lock'
Full build log at /tmp/catalyst-auto.25067/log/stage1.log
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2015-11-29 12:09 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-15 11:29 [gentoo-releng-autobuilds] [ppc-auto] Catalyst fatal build error - stage1.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2015-11-29 12:01 catalyst
2015-06-14 10:43 catalyst
2015-03-01 11:29 catalyst
2015-02-22 11:34 catalyst
2015-02-08 11:17 catalyst
2015-02-01 11:22 catalyst
2014-09-28 10:17 catalyst
2011-09-18 11:03 catalyst
2011-09-04 10:18 catalyst
2011-08-28 10:16 catalyst
2011-08-21 10:19 catalyst
2011-08-14 10:24 catalyst
2011-08-07 10:26 catalyst
2011-07-31 10:31 catalyst
2011-07-24 10:33 catalyst
2011-03-06 13:24 catalyst
2011-02-20 13:23 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox