* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-02-13 9:00 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-02-13 9:00 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150213.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150213/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150213/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150213.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.aoxfCg/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2020-03-19 1:10 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2020-03-19 1:10 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
18 Mar 2020 21:10:27 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
18 Mar 2020 21:10:28 EDT: NOTICE : conf_values[options] = {'pkgcache', 'kerncache', 'autoresume', 'bindist', 'seedcache', 'clear-autoresume', 'snapcache'}
18 Mar 2020 21:10:29 EDT: NOTICE : Processing spec file: netboot2-hppa32.spec
18 Mar 2020 21:10:30 EDT: NOTICE : Using target: netboot2
18 Mar 2020 21:10:31 EDT: NOTICE : Source file specification matching setting is: strict
18 Mar 2020 21:10:31 EDT: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
18 Mar 2020 21:10:34 EDT: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20200316T222016Z/
18 Mar 2020 21:10:34 EDT: NOTICE : Removing AutoResume Points ...
18 Mar 2020 21:10:34 EDT: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20200316T222016Z
18 Mar 2020 21:10:34 EDT: NOTICE : --- Running action sequence: unpack
18 Mar 2020 21:10:34 EDT: NOTICE : Resume: "seed source" unpack resume point is disabled
18 Mar 2020 21:10:34 EDT: NOTICE : Resume: Target chroot is invalid, cleaning up...
18 Mar 2020 21:10:34 EDT: NOTICE : Removing AutoResume Points ...
18 Mar 2020 21:10:34 EDT: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20200316T222016Z
18 Mar 2020 21:10:34 EDT: NOTICE : Clearing the chroot path ...
18 Mar 2020 21:10:34 EDT: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20200316T222016Z
18 Mar 2020 21:10:34 EDT: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20200316T222016Z/
18 Mar 2020 21:10:34 EDT: NOTICE : to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20200316T222016Z (this may take some time) ..
Full build log at /tmp/catalyst-auto.20200316T222016Z.tP5JVM/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2020-03-10 5:33 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2020-03-10 5:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
10 Mar 2020 01:33:09 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
10 Mar 2020 01:33:09 EDT: NOTICE : conf_values[options] = {'autoresume', 'pkgcache', 'bindist', 'clear-autoresume', 'snapcache'}
10 Mar 2020 01:33:12 EDT: NOTICE : Processing spec file: netboot2-hppa32.spec
10 Mar 2020 01:33:17 EDT: NOTICE : Using target: netboot2
10 Mar 2020 01:33:19 EDT: NOTICE : Source file specification matching setting is: strict
10 Mar 2020 01:33:19 EDT: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
10 Mar 2020 01:33:29 EDT: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20200301T103020Z
Command exited with non-zero status 2
2.86user 0.59system 0:36.50elapsed 9%CPU (0avgtext+0avgdata 13400maxresident)k
32inputs+16outputs (0major+6978minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200301T103020Z.qvRacr/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2020-02-04 3:38 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2020-02-04 3:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
03 Feb 2020 22:38:41 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
03 Feb 2020 22:38:41 EST: NOTICE : conf_values[options] = {'clear-autoresume', 'autoresume', 'snapcache', 'bindist', 'pkgcache'}
03 Feb 2020 22:38:42 EST: NOTICE : Processing spec file: netboot2-hppa32.spec
03 Feb 2020 22:38:42 EST: NOTICE : Using target: netboot2
03 Feb 2020 22:38:42 EST: NOTICE : Source file specification matching setting is: strict
03 Feb 2020 22:38:42 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
03 Feb 2020 22:38:43 EST: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20200201T103029Z
Command exited with non-zero status 2
2.47user 0.53system 0:03.10elapsed 97%CPU (0avgtext+0avgdata 13956maxresident)k
32inputs+0outputs (0major+6926minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200201T103029Z.OponEd/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2020-01-04 5:55 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2020-01-04 5:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
04 Jan 2020 00:55:38 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
04 Jan 2020 00:55:38 EST: NOTICE : conf_values[options] = {'bindist', 'pkgcache', 'snapcache', 'autoresume', 'clear-autoresume'}
04 Jan 2020 00:55:38 EST: NOTICE : Processing spec file: netboot2-hppa32.spec
04 Jan 2020 00:55:39 EST: NOTICE : Using target: netboot2
04 Jan 2020 00:55:39 EST: NOTICE : Source file specification matching setting is: strict
04 Jan 2020 00:55:39 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
04 Jan 2020 00:55:40 EST: ERROR : CatalystError: File Not Found: /usr/local/catalyst/builds/default/stage3-hppa1.1-20200101T103009Z
Command exited with non-zero status 2
2.39user 0.58system 0:03.07elapsed 97%CPU (0avgtext+0avgdata 13208maxresident)k
32inputs+0outputs (0major+6892minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20200101T103009Z.JEJUAW/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2019-10-04 9:18 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2019-10-04 9:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for hppa1.1-unknown-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... hppa1.1-unknown-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if hppa1.1-unknown-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for hppa1.1-unknown-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if hppa1.1-unknown-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if hppa1.1-unknown-linux-gnu-gcc static flag -static works... yes
checking if hppa1.1-unknown-linux-gnu-gcc supports -c -o file.o... yes
checking if hppa1.1-unknown-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the hppa1.1-unknown-linux-gnu-gcc linker (/usr/hppa1.1-unknown-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for uuid_generate in -luuid... yes
checking for _et_list in -lcom_err... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking for unistd.h... (cached) yes
checking uuid/uuid.h usability... yes
checking uuid/uuid.h presence... yes
checking for uuid/uuid.h... yes
checking whether sys/types.h defines makedev... no
checking sys/mkdev.h usability... no
checking sys/mkdev.h presence... no
checking for sys/mkdev.h... no
checking sys/sysmacros.h usability... yes
checking sys/sysmacros.h presence... yes
checking for sys/sysmacros.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking for struct stat.st_rdev... yes
checking whether -Wuninitialized works... yes
checking whether -Wno-unused-parameter works... yes
checking whether -Wredundant-decls works... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking size of off_t... 8
checking size of blkcnt_t... 8
checking whether hppa1.1-unknown-linux-gnu-gcc needs -traditional... no
checking for working memcmp... yes
checking for strftime... yes
checking for vprintf... yes
checking for _doprnt... no
checking for strerror... yes
checking for strstr... yes
checking for strtol... yes
checking for statfs... yes
checking for getmntent... yes
checking for hasmntopt... yes
checking for memset... yes
checking for time... yes
checking for uname... yes
checking for strptime... yes
checking for ctime_r... yes
checking for register_printf_modifier... yes
checking for register_printf_specifier... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating mkreiserfs/Makefile
config.status: creating mkreiserfs/mkreiserfs.8
config.status: creating resize_reiserfs/Makefile
config.status: creating resize_reiserfs/resize_reiserfs.8
config.status: creating fsck/Makefile
config.status: creating fsck/reiserfsck.8
config.status: creating lib/Makefile
config.status: creating Makefile
config.status: creating reiserfscore/Makefile
config.status: creating reiserfscore/reiserfscore.pc
config.status: creating debugreiserfs/Makefile
config.status: creating debugreiserfs/debugreiserfs.8
config.status: creating tune/Makefile
config.status: creating tune/reiserfstune.8
config.status: creating include/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure:
Type 'make' to compile reiserfsprogs
Making all in include
make[1]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make all-am
make[2]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make[2]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make[1]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
Making all in lib
make[1]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/lib'
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o io.lo io.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c io.c -fPIC -DPIC -o .libs/io.o
^[[01m^[[Kio.c:^[[m^[[K In function '^[[01m^[[Kopen_rollback_file^[[m^[[K':
^[[01m^[[Kio.c:606:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(string, 28, 1, s_rollback_file)^[[m^[[K;
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01m^[[Kio.c:616:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(&rollback_blocksize, sizeof(rollback_blocksize), 1,^[[m^[[K
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01;35m^[[K s_rollback_file)^[[m^[[K;
^[[01;35m^[[K~~~~~~~~~~~~~~~~^[[m^[[K
^[[01m^[[Kio.c:^[[m^[[K In function '^[[01m^[[Kdo_fsck_rollback^[[m^[[K':
^[[01m^[[Kio.c:707:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(&rollback_blocks_number, sizeof(rollback_blocks_number), 1,^[[m^[[K
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01;35m^[[K s_rollback_file)^[[m^[[K;
^[[01;35m^[[K~~~~~~~~~~~~~~~~^[[m^[[K
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o misc.lo misc.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c misc.c -fPIC -DPIC -o .libs/misc.o
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o parse_time.lo parse_time.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c parse_time.c -fPIC -DPIC -o .libs/parse_time.o
In file included from ^[[01m^[[Kparse_time.c:7^[[m^[[K:
^[[01m^[[K../include/misc.h:75:26:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
int valid_offset(int fd, ^[[01;31m^[[Kloff_t^[[m^[[K offset);
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
In file included from ^[[01m^[[Kparse_time.c:8^[[m^[[K:
^[[01m^[[K../include/reiserfs_lib.h:300:55:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
void set_offset(int format, struct reiserfs_key *key, ^[[01;31m^[[Kloff_t^[[m^[[K offset);
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
^[[01m^[[K../include/reiserfs_lib.h:301:64:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
void set_type_and_offset(int format, struct reiserfs_key *key, ^[[01;31m^[[Kloff_t^[[m^[[K offset,
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
make[1]: *** [Makefile:369: parse_time.lo] Error 1
make[1]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/lib'
make: *** [Makefile:377: all-recursive] Error 1
* ERROR: sys-fs/reiserfsprogs-3.6.25::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/reiserfsprogs-3.6.25::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/reiserfsprogs-3.6.25::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* S: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* Messages for package sys-fs/reiserfsprogs-3.6.25:
* ERROR: sys-fs/reiserfsprogs-3.6.25::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/reiserfsprogs-3.6.25::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/reiserfsprogs-3.6.25::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* S: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
04 Oct 2019 05:18:19 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/netboot2/netboot2-controller.sh', 'build_packages', 'sys-boot/palo', 'sys-fs/mdadm', 'sys-fs/e2fsprogs', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-apps/util-linux', 'app-editors/nano', 'sys-libs/ncurses', 'dev-libs/popt', 'net-misc/wget', 'net-misc/rsync', 'dev-libs/libtommath', 'net-misc/dropbear', 'dev-libs/openssl', 'app-misc/screen', 'sys-devel/bc']) exited 1
04 Oct 2019 05:18:20 EDT: ERROR : CatalystError: netboot2build aborting due to error.
04 Oct 2019 05:18:20 EDT: ERROR : Exception running action sequence build_packages
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1561, in build_packages
cmd(command, env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/netboot2/netboot2-controller.sh', 'build_packages', 'sys-boot/palo', 'sys-fs/mdadm', 'sys-fs/e2fsprogs', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-apps/util-linux', 'app-editors/nano', 'sys-libs/ncurses', 'dev-libs/popt', 'net-misc/wget', 'net-misc/rsync', 'dev-libs/libtommath', 'net-misc/dropbear', 'dev-libs/openssl', 'app-misc/screen', 'sys-devel/bc']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1568, in build_packages
"build aborting due to error.")
catalyst.support.CatalystError: netboot2build aborting due to error.
04 Oct 2019 05:18:20 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
549.57user 329.29system 25:15.61elapsed 57%CPU (0avgtext+0avgdata 36356maxresident)k
0inputs+0outputs (11major+3109017minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20191001T093029Z.ylQ6j8/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2019-09-06 21:14 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2019-09-06 21:14 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for hppa1.1-unknown-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... hppa1.1-unknown-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if hppa1.1-unknown-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for hppa1.1-unknown-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if hppa1.1-unknown-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if hppa1.1-unknown-linux-gnu-gcc static flag -static works... yes
checking if hppa1.1-unknown-linux-gnu-gcc supports -c -o file.o... yes
checking if hppa1.1-unknown-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the hppa1.1-unknown-linux-gnu-gcc linker (/usr/hppa1.1-unknown-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for uuid_generate in -luuid... yes
checking for _et_list in -lcom_err... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking for unistd.h... (cached) yes
checking uuid/uuid.h usability... yes
checking uuid/uuid.h presence... yes
checking for uuid/uuid.h... yes
checking whether sys/types.h defines makedev... no
checking sys/mkdev.h usability... no
checking sys/mkdev.h presence... no
checking for sys/mkdev.h... no
checking sys/sysmacros.h usability... yes
checking sys/sysmacros.h presence... yes
checking for sys/sysmacros.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking for struct stat.st_rdev... yes
checking whether -Wuninitialized works... yes
checking whether -Wno-unused-parameter works... yes
checking whether -Wredundant-decls works... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking size of off_t... 8
checking size of blkcnt_t... 8
checking whether hppa1.1-unknown-linux-gnu-gcc needs -traditional... no
checking for working memcmp... yes
checking for strftime... yes
checking for vprintf... yes
checking for _doprnt... no
checking for strerror... yes
checking for strstr... yes
checking for strtol... yes
checking for statfs... yes
checking for getmntent... yes
checking for hasmntopt... yes
checking for memset... yes
checking for time... yes
checking for uname... yes
checking for strptime... yes
checking for ctime_r... yes
checking for register_printf_modifier... yes
checking for register_printf_specifier... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating mkreiserfs/Makefile
config.status: creating mkreiserfs/mkreiserfs.8
config.status: creating resize_reiserfs/Makefile
config.status: creating resize_reiserfs/resize_reiserfs.8
config.status: creating fsck/Makefile
config.status: creating fsck/reiserfsck.8
config.status: creating lib/Makefile
config.status: creating Makefile
config.status: creating reiserfscore/Makefile
config.status: creating reiserfscore/reiserfscore.pc
config.status: creating debugreiserfs/Makefile
config.status: creating debugreiserfs/debugreiserfs.8
config.status: creating tune/Makefile
config.status: creating tune/reiserfstune.8
config.status: creating include/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure:
Type 'make' to compile reiserfsprogs
Making all in include
make[1]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make all-am
make[2]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make[2]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
make[1]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/include'
Making all in lib
make[1]: Entering directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/lib'
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o io.lo io.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c io.c -fPIC -DPIC -o .libs/io.o
^[[01m^[[Kio.c:^[[m^[[K In function '^[[01m^[[Kopen_rollback_file^[[m^[[K':
^[[01m^[[Kio.c:606:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(string, 28, 1, s_rollback_file)^[[m^[[K;
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01m^[[Kio.c:616:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(&rollback_blocksize, sizeof(rollback_blocksize), 1,^[[m^[[K
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01;35m^[[K s_rollback_file)^[[m^[[K;
^[[01;35m^[[K~~~~~~~~~~~~~~~~^[[m^[[K
^[[01m^[[Kio.c:^[[m^[[K In function '^[[01m^[[Kdo_fsck_rollback^[[m^[[K':
^[[01m^[[Kio.c:707:2:^[[m^[[K ^[[01;35m^[[Kwarning: ^[[m^[[Kignoring return value of '^[[01m^[[Kfread^[[m^[[K', declared with attribute warn_unused_result [^[[01;35m^[[K-Wunused-result^[[m^[[K]
^[[01;35m^[[Kfread(&rollback_blocks_number, sizeof(rollback_blocks_number), 1,^[[m^[[K
^[[01;35m^[[K^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^[[m^[[K
^[[01;35m^[[K s_rollback_file)^[[m^[[K;
^[[01;35m^[[K~~~~~~~~~~~~~~~~^[[m^[[K
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o misc.lo misc.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c misc.c -fPIC -DPIC -o .libs/misc.o
/bin/sh ../libtool --tag=CC --mode=compile hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c -o parse_time.lo parse_time.c
libtool: compile: hppa1.1-unknown-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O2 -pipe -march=1.1 -std=gnu89 -Wno-unused-parameter -Wredundant-decls -Wuninitialized -c parse_time.c -fPIC -DPIC -o .libs/parse_time.o
In file included from ^[[01m^[[Kparse_time.c:7^[[m^[[K:
^[[01m^[[K../include/misc.h:75:26:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
int valid_offset(int fd, ^[[01;31m^[[Kloff_t^[[m^[[K offset);
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
In file included from ^[[01m^[[Kparse_time.c:8^[[m^[[K:
^[[01m^[[K../include/reiserfs_lib.h:300:55:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
void set_offset(int format, struct reiserfs_key *key, ^[[01;31m^[[Kloff_t^[[m^[[K offset);
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
^[[01m^[[K../include/reiserfs_lib.h:301:64:^[[m^[[K ^[[01;31m^[[Kerror: ^[[m^[[Kunknown type name '^[[01m^[[Kloff_t^[[m^[[K'; did you mean '^[[01m^[[Koff_t^[[m^[[K'?
void set_type_and_offset(int format, struct reiserfs_key *key, ^[[01;31m^[[Kloff_t^[[m^[[K offset,
^[[01;31m^[[K^~~~~~^[[m^[[K
^[[32m^[[Koff_t^[[m^[[K
make[1]: *** [Makefile:369: parse_time.lo] Error 1
make[1]: Leaving directory '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25/lib'
make: *** [Makefile:377: all-recursive] Error 1
* ERROR: sys-fs/reiserfsprogs-3.6.25::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/reiserfsprogs-3.6.25::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/reiserfsprogs-3.6.25::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* S: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* Messages for package sys-fs/reiserfsprogs-3.6.25:
* ERROR: sys-fs/reiserfsprogs-3.6.25::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/reiserfsprogs-3.6.25::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/reiserfsprogs-3.6.25::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
* S: '/var/tmp/portage/sys-fs/reiserfsprogs-3.6.25/work/reiserfsprogs-3.6.25'
06 Sep 2019 17:14:13 EDT: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/netboot2/netboot2-controller.sh', 'build_packages', 'sys-boot/palo', 'sys-fs/mdadm', 'sys-fs/e2fsprogs', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-apps/util-linux', 'app-editors/nano', 'sys-libs/ncurses', 'dev-libs/popt', 'net-misc/wget', 'net-misc/rsync', 'dev-libs/libtommath', 'net-misc/dropbear', 'dev-libs/openssl', 'app-misc/screen', 'sys-devel/bc']) exited 1
06 Sep 2019 17:14:14 EDT: ERROR : CatalystError: netboot2build aborting due to error.
06 Sep 2019 17:14:14 EDT: ERROR : Exception running action sequence build_packages
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1561, in build_packages
cmd(command, env=self.env)
File "/usr/lib/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/netboot2/netboot2-controller.sh', 'build_packages', 'sys-boot/palo', 'sys-fs/mdadm', 'sys-fs/e2fsprogs', 'sys-fs/reiserfsprogs', 'sys-fs/xfsprogs', 'sys-apps/util-linux', 'app-editors/nano', 'sys-libs/ncurses', 'dev-libs/popt', 'net-misc/wget', 'net-misc/rsync', 'dev-libs/libtommath', 'net-misc/dropbear', 'dev-libs/openssl', 'app-misc/screen', 'sys-devel/bc']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1568, in build_packages
"build aborting due to error.")
catalyst.support.CatalystError: netboot2build aborting due to error.
06 Sep 2019 17:14:14 EDT: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2017.60user 3152.19system 1:29:25elapsed 96%CPU (0avgtext+0avgdata 42340maxresident)k
0inputs+0outputs (33major+17781408minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190901T093009Z.MqQfij/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2019-06-02 17:20 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2019-06-02 17:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
02 Jun 2019 13:20:34 EDT: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
02 Jun 2019 13:20:34 EDT: NOTICE : conf_values[options] = {'clear-autoresume', 'pkgcache', 'bindist', 'autoresume', 'snapcache'}
02 Jun 2019 13:20:34 EDT: NOTICE : Processing spec file: netboot2-hppa32.spec
02 Jun 2019 13:20:34 EDT: NOTICE : Using target: netboot2
02 Jun 2019 13:20:34 EDT: NOTICE : Source file specification matching setting is: strict
02 Jun 2019 13:20:34 EDT: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
02 Jun 2019 13:20:40 EDT: NOTICE : Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20190601T093019Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/python-exec/python3.6/catalyst", line 37, in <module>
main(sys.argv[1:])
File "/usr/lib/python3.6/site-packages/catalyst/main.py", line 285, in main
return _main(parser, opts)
File "/usr/lib/python3.6/site-packages/catalyst/main.py", line 452, in _main
success = build_target(addlargs)
File "/usr/lib/python3.6/site-packages/catalyst/main.py", line 107, in build_target
target = getattr(module, target)(conf_values, addlargs)
File "/usr/lib/python3.6/site-packages/catalyst/targets/netboot2.py", line 46, in __init__
StageBase.__init__(self,spec,addlargs)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 173, in __init__
self.set_chroot_path()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 508, in set_chroot_path
self.chroot_lock = LockDir(self.settings["chroot_path"])
File "/usr/lib/python3.6/site-packages/catalyst/lock.py", line 19, in __init__
fileutils.touch(self.lockfile, mode=0o664)
File "/usr/lib/python3.6/site-packages/snakeoil/fileutils.py", line 46, in touch
with os.fdopen(os_open(fname, flags, mode)) as f:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190601T093019Z/.catalyst_lock'
Command exited with non-zero status 1
5.66user 1.85system 0:08.10elapsed 92%CPU (0avgtext+0avgdata 12668maxresident)k
0inputs+0outputs (0major+7249minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190601T093019Z.hfMrLu/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2019-03-05 4:51 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2019-03-05 4:51 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
04 Mar 2019 23:51:25 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
04 Mar 2019 23:51:25 EST: NOTICE : conf_values[options] = {'clear-autoresume', 'pkgcache', 'seedcache', 'snapcache', 'autoresume', 'bindist'}
04 Mar 2019 23:51:26 EST: NOTICE : Processing spec file: netboot2-hppa32.spec
04 Mar 2019 23:51:26 EST: NOTICE : Using target: netboot2
04 Mar 2019 23:51:26 EST: NOTICE : Source file specification matching setting is: strict
04 Mar 2019 23:51:26 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
04 Mar 2019 23:51:27 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190303T055259Z/
04 Mar 2019 23:51:27 EST: NOTICE : Removing AutoResume Points ...
04 Mar 2019 23:51:27 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20190303T055259Z
04 Mar 2019 23:51:27 EST: NOTICE : --- Running action sequence: unpack
04 Mar 2019 23:51:27 EST: NOTICE : Resume: "seed source" unpack resume point is disabled
04 Mar 2019 23:51:27 EST: NOTICE : Resume: Target chroot is invalid, cleaning up...
04 Mar 2019 23:51:27 EST: NOTICE : Removing AutoResume Points ...
04 Mar 2019 23:51:27 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20190303T055259Z
04 Mar 2019 23:51:27 EST: NOTICE : Clearing the chroot path ...
04 Mar 2019 23:51:27 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190303T055259Z
04 Mar 2019 23:51:27 EST: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190303T055259Z/
04 Mar 2019 23:51:27 EST: NOTICE : to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190303T055259Z (this may take some time) ..
04 Mar 2019 23:51:27 EST: NOTICE : --- Running action sequence: unpack_snapshot
04 Mar 2019 23:51:27 EST: NOTICE : --- Running action sequence: config_profile_link
04 Mar 2019 23:51:27 EST: NOTICE : --- Running action sequence: setup_confdir
04 Mar 2019 23:51:27 EST: NOTICE : --- Running action sequence: portage_overlay
04 Mar 2019 23:51:27 EST: NOTICE : --- Running action sequence: bind
04 Mar 2019 23:51:27 EST: NOTICE : --- Running action sequence: chroot_setup
04 Mar 2019 23:51:27 EST: NOTICE : Setting up chroot...
04 Mar 2019 23:51:27 EST: WARNING : Overriding certain env variables may cause catastrophic failure.
04 Mar 2019 23:51:27 EST: WARNING : If your build fails look here first as the possible problem.
04 Mar 2019 23:51:27 EST: WARNING : Catalyst assumes you know what you are doing when setting these variables.
04 Mar 2019 23:51:27 EST: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
04 Mar 2019 23:51:27 EST: WARNING : You have been warned.
04 Mar 2019 23:51:27 EST: ERROR : Exception running action sequence chroot_setup
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1068, in chroot_setup
self.settings['chroot_path'] + '/tmp/envscript')
File "/usr/lib/python3.6/shutil.py", line 241, in copy
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/usr/lib/python3.6/shutil.py", line 121, in copyfile
with open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190303T055259Z/tmp/envscript'
04 Mar 2019 23:51:27 EST: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2.76user 1.06system 0:03.94elapsed 96%CPU (0avgtext+0avgdata 13164maxresident)k
0inputs+0outputs (0major+16634minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190303T055259Z.KJy1Zq/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2019-03-03 3:16 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2019-03-03 3:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
02 Mar 2019 22:16:11 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
02 Mar 2019 22:16:11 EST: NOTICE : conf_values[options] = {'pkgcache', 'bindist', 'clear-autoresume', 'autoresume', 'seedcache', 'snapcache'}
02 Mar 2019 22:16:12 EST: NOTICE : Processing spec file: netboot2-hppa32.spec
02 Mar 2019 22:16:13 EST: NOTICE : Using target: netboot2
02 Mar 2019 22:16:13 EST: NOTICE : Source file specification matching setting is: strict
02 Mar 2019 22:16:13 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
02 Mar 2019 22:16:15 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190301T103008Z/
Traceback (most recent call last):
File "/usr/lib/python-exec/python3.6/catalyst", line 37, in <module>
main(sys.argv[1:])
File "/usr/lib/python3.6/site-packages/catalyst/main.py", line 285, in main
return _main(parser, opts)
File "/usr/lib/python3.6/site-packages/catalyst/main.py", line 452, in _main
success = build_target(addlargs)
File "/usr/lib/python3.6/site-packages/catalyst/main.py", line 107, in build_target
target = getattr(module, target)(conf_values, addlargs)
File "/usr/lib/python3.6/site-packages/catalyst/targets/netboot2.py", line 46, in __init__
StageBase.__init__(self,spec,addlargs)
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 173, in __init__
self.set_chroot_path()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 504, in set_chroot_path
self.chroot_lock = LockDir(self.settings["chroot_path"])
File "/usr/lib/python3.6/site-packages/catalyst/lock.py", line 19, in __init__
fileutils.touch(self.lockfile, mode=0o664)
File "/usr/lib/python3.6/site-packages/snakeoil/fileutils.py", line 46, in touch
with os.fdopen(os_open(fname, flags, mode)) as f:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190301T103008Z/.catalyst_lock'
Command exited with non-zero status 1
2.45user 0.61system 0:08.39elapsed 36%CPU (0avgtext+0avgdata 12700maxresident)k
0inputs+0outputs (0major+6871minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190301T103008Z.JgkwTH/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2019-02-02 12:11 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2019-02-02 12:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
02 Feb 2019 07:11:43 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
02 Feb 2019 07:11:43 EST: NOTICE : conf_values[options] = {'pkgcache', 'bindist', 'autoresume', 'clear-autoresume', 'seedcache', 'snapcache'}
02 Feb 2019 07:11:43 EST: NOTICE : Processing spec file: netboot2-hppa32.spec
02 Feb 2019 07:11:44 EST: NOTICE : Using target: netboot2
02 Feb 2019 07:11:44 EST: NOTICE : Source file specification matching setting is: strict
02 Feb 2019 07:11:44 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
02 Feb 2019 07:11:45 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190201T103010Z/
02 Feb 2019 07:11:45 EST: NOTICE : Removing AutoResume Points ...
02 Feb 2019 07:11:45 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20190201T103010Z
02 Feb 2019 07:11:45 EST: NOTICE : --- Running action sequence: unpack
02 Feb 2019 07:11:45 EST: NOTICE : Resume: "seed source" unpack resume point is disabled
02 Feb 2019 07:11:45 EST: NOTICE : Resume: Target chroot is invalid, cleaning up...
02 Feb 2019 07:11:45 EST: NOTICE : Removing AutoResume Points ...
02 Feb 2019 07:11:45 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20190201T103010Z
02 Feb 2019 07:11:45 EST: NOTICE : Clearing the chroot path ...
02 Feb 2019 07:11:45 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190201T103010Z
02 Feb 2019 07:11:45 EST: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190201T103010Z/
02 Feb 2019 07:11:45 EST: NOTICE : to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190201T103010Z (this may take some time) ..
02 Feb 2019 07:11:45 EST: NOTICE : --- Running action sequence: unpack_snapshot
02 Feb 2019 07:11:45 EST: NOTICE : --- Running action sequence: config_profile_link
02 Feb 2019 07:11:45 EST: NOTICE : --- Running action sequence: setup_confdir
02 Feb 2019 07:11:45 EST: NOTICE : --- Running action sequence: portage_overlay
02 Feb 2019 07:11:45 EST: NOTICE : --- Running action sequence: bind
02 Feb 2019 07:11:45 EST: NOTICE : --- Running action sequence: chroot_setup
02 Feb 2019 07:11:45 EST: NOTICE : Setting up chroot...
02 Feb 2019 07:11:45 EST: WARNING : Overriding certain env variables may cause catastrophic failure.
02 Feb 2019 07:11:45 EST: WARNING : If your build fails look here first as the possible problem.
02 Feb 2019 07:11:45 EST: WARNING : Catalyst assumes you know what you are doing when setting these variables.
02 Feb 2019 07:11:45 EST: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
02 Feb 2019 07:11:45 EST: WARNING : You have been warned.
02 Feb 2019 07:11:45 EST: ERROR : Exception running action sequence chroot_setup
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1068, in chroot_setup
self.settings['chroot_path'] + '/tmp/envscript')
File "/usr/lib/python3.6/shutil.py", line 241, in copy
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/usr/lib/python3.6/shutil.py", line 121, in copyfile
with open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190201T103010Z/tmp/envscript'
02 Feb 2019 07:11:45 EST: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2.66user 1.17system 0:04.05elapsed 94%CPU (0avgtext+0avgdata 14428maxresident)k
0inputs+0outputs (0major+16530minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190201T103010Z.xiYfei/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2019-01-03 17:52 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2019-01-03 17:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
03 Jan 2019 12:52:23 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
03 Jan 2019 12:52:23 EST: NOTICE : conf_values[options] = {'clear-autoresume', 'autoresume', 'bindist', 'pkgcache', 'seedcache', 'snapcache'}
03 Jan 2019 12:52:23 EST: NOTICE : Processing spec file: netboot2-hppa32.spec
03 Jan 2019 12:52:24 EST: NOTICE : Using target: netboot2
03 Jan 2019 12:52:24 EST: NOTICE : Source file specification matching setting is: strict
03 Jan 2019 12:52:24 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
03 Jan 2019 12:52:25 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190101T103011Z/
03 Jan 2019 12:52:25 EST: NOTICE : Removing AutoResume Points ...
03 Jan 2019 12:52:25 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20190101T103011Z
03 Jan 2019 12:52:25 EST: NOTICE : --- Running action sequence: unpack
03 Jan 2019 12:52:25 EST: NOTICE : Resume: "seed source" unpack resume point is disabled
03 Jan 2019 12:52:25 EST: NOTICE : Resume: Target chroot is invalid, cleaning up...
03 Jan 2019 12:52:25 EST: NOTICE : Removing AutoResume Points ...
03 Jan 2019 12:52:25 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20190101T103011Z
03 Jan 2019 12:52:25 EST: NOTICE : Clearing the chroot path ...
03 Jan 2019 12:52:25 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190101T103011Z
03 Jan 2019 12:52:25 EST: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20190101T103011Z/
03 Jan 2019 12:52:25 EST: NOTICE : to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190101T103011Z (this may take some time) ..
03 Jan 2019 12:52:25 EST: NOTICE : --- Running action sequence: unpack_snapshot
03 Jan 2019 12:52:25 EST: NOTICE : --- Running action sequence: config_profile_link
03 Jan 2019 12:52:25 EST: NOTICE : --- Running action sequence: setup_confdir
03 Jan 2019 12:52:25 EST: NOTICE : --- Running action sequence: portage_overlay
03 Jan 2019 12:52:25 EST: NOTICE : --- Running action sequence: bind
03 Jan 2019 12:52:25 EST: NOTICE : --- Running action sequence: chroot_setup
03 Jan 2019 12:52:25 EST: NOTICE : Setting up chroot...
03 Jan 2019 12:52:25 EST: WARNING : Overriding certain env variables may cause catastrophic failure.
03 Jan 2019 12:52:25 EST: WARNING : If your build fails look here first as the possible problem.
03 Jan 2019 12:52:25 EST: WARNING : Catalyst assumes you know what you are doing when setting these variables.
03 Jan 2019 12:52:25 EST: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
03 Jan 2019 12:52:25 EST: WARNING : You have been warned.
03 Jan 2019 12:52:25 EST: ERROR : Exception running action sequence chroot_setup
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1068, in chroot_setup
self.settings['chroot_path'] + '/tmp/envscript')
File "/usr/lib/python3.6/shutil.py", line 241, in copy
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/usr/lib/python3.6/shutil.py", line 121, in copyfile
with open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20190101T103011Z/tmp/envscript'
03 Jan 2019 12:52:25 EST: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2.65user 1.16system 0:04.01elapsed 95%CPU (0avgtext+0avgdata 14408maxresident)k
0inputs+0outputs (0major+16525minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20190101T103011Z.pyrpA1/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2018-12-05 17:12 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2018-12-05 17:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
05 Dec 2018 12:12:48 EST: NOTICE : Loading configuration file: /etc/catalyst/catalyst.conf
05 Dec 2018 12:12:48 EST: NOTICE : conf_values[options] = {'bindist', 'clear-autoresume', 'seedcache', 'pkgcache', 'autoresume', 'snapcache'}
05 Dec 2018 12:12:48 EST: NOTICE : Processing spec file: netboot2-hppa32.spec
05 Dec 2018 12:12:49 EST: NOTICE : Using target: netboot2
05 Dec 2018 12:12:49 EST: NOTICE : Source file specification matching setting is: strict
05 Dec 2018 12:12:49 EST: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
05 Dec 2018 12:12:50 EST: NOTICE : Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20181201T103010Z/
05 Dec 2018 12:12:50 EST: NOTICE : Removing AutoResume Points ...
05 Dec 2018 12:12:50 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20181201T103010Z
05 Dec 2018 12:12:50 EST: NOTICE : --- Running action sequence: unpack
05 Dec 2018 12:12:50 EST: NOTICE : Resume: "seed source" unpack resume point is disabled
05 Dec 2018 12:12:50 EST: NOTICE : Resume: Target chroot is invalid, cleaning up...
05 Dec 2018 12:12:50 EST: NOTICE : Removing AutoResume Points ...
05 Dec 2018 12:12:50 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20181201T103010Z
05 Dec 2018 12:12:50 EST: NOTICE : Clearing the chroot path ...
05 Dec 2018 12:12:50 EST: NOTICE : Emptying directory: /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20181201T103010Z
05 Dec 2018 12:12:50 EST: NOTICE : Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20181201T103010Z/
05 Dec 2018 12:12:50 EST: NOTICE : to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20181201T103010Z (this may take some time) ..
05 Dec 2018 12:12:50 EST: NOTICE : --- Running action sequence: unpack_snapshot
05 Dec 2018 12:12:50 EST: NOTICE : --- Running action sequence: config_profile_link
05 Dec 2018 12:12:50 EST: NOTICE : --- Running action sequence: setup_confdir
05 Dec 2018 12:12:50 EST: NOTICE : --- Running action sequence: portage_overlay
05 Dec 2018 12:12:50 EST: NOTICE : --- Running action sequence: bind
05 Dec 2018 12:12:50 EST: NOTICE : --- Running action sequence: chroot_setup
05 Dec 2018 12:12:50 EST: NOTICE : Setting up chroot...
05 Dec 2018 12:12:50 EST: WARNING : Overriding certain env variables may cause catastrophic failure.
05 Dec 2018 12:12:50 EST: WARNING : If your build fails look here first as the possible problem.
05 Dec 2018 12:12:50 EST: WARNING : Catalyst assumes you know what you are doing when setting these variables.
05 Dec 2018 12:12:50 EST: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
05 Dec 2018 12:12:50 EST: WARNING : You have been warned.
05 Dec 2018 12:12:50 EST: ERROR : Exception running action sequence chroot_setup
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib/python3.6/site-packages/catalyst/base/stagebase.py", line 1068, in chroot_setup
self.settings['chroot_path'] + '/tmp/envscript')
File "/usr/lib/python3.6/shutil.py", line 241, in copy
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/usr/lib/python3.6/shutil.py", line 121, in copyfile
with open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20181201T103010Z/tmp/envscript'
05 Dec 2018 12:12:50 EST: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2.70user 1.16system 0:03.98elapsed 97%CPU (0avgtext+0avgdata 14448maxresident)k
0inputs+0outputs (0major+16540minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20181201T103010Z.yMly6a/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2018-09-14 18:19 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2018-09-14 18:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180909T071009Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180909T071009Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20180909T071009Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20180909T071009Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
1.15user 0.48system 0:03.37elapsed 48%CPU (0avgtext+0avgdata 11384maxresident)k
0inputs+0outputs (0major+3138minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180909T071009Z.OOdoDY/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2018-08-03 17:16 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2018-08-03 17:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180722T071014Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180722T071014Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20180722T071014Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20180722T071014Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
1.16user 0.42system 0:01.61elapsed 98%CPU (0avgtext+0avgdata 11160maxresident)k
0inputs+0outputs (0major+3105minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180722T071014Z.t6CHVu/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2018-06-09 17:26 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2018-06-09 17:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180603T071008Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180603T071008Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20180603T071008Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20180603T071008Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
1.24user 0.37system 0:01.64elapsed 98%CPU (0avgtext+0avgdata 11220maxresident)k
0inputs+0outputs (0major+3092minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180603T071008Z.xJbQ7u/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2018-04-14 20:33 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2018-04-14 20:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180409T071008Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180409T071008Z/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 136, in __init__
self.set_chroot_path()
File "modules/generic_stage_target.py", line 449, in set_chroot_path
self.chroot_lock=catalyst_lock.LockDir(self.settings["chroot_path"])
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 29, in __init__
self.set_lockdir(lockdir)
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 66, in set_lockdir
os.makedirs(lockdir)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20180409T071008Z/'
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
1.20user 0.40system 0:01.65elapsed 97%CPU (0avgtext+0avgdata 11196maxresident)k
0inputs+0outputs (0major+3097minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180409T071008Z.0yy8WH/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2018-04-08 19:50 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2018-04-08 19:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180327T071008Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180327T071008Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20180327T071008Z/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 137, in __init__
self.set_autoresume_path()
File "modules/generic_stage_target.py", line 459, in set_autoresume_path
os.makedirs(self.settings["autoresume_path"],0755)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20180327T071008Z/'
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
3.84user 1.38system 0:05.26elapsed 99%CPU (0avgtext+0avgdata 11204maxresident)k
0inputs+0outputs (0major+3420minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180327T071008Z.4esjmv/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2018-02-23 3:34 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2018-02-23 3:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/catalyst.conf -f netboot2-hppa32.spec
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20180211T081007Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20180211T081007Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20180211T081007Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20180211T081007Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
1.19user 0.46system 0:03.39elapsed 48%CPU (0avgtext+0avgdata 11200maxresident)k
0inputs+0outputs (0major+3094minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20180211T081007Z.pYV9PH/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2017-12-19 9:46 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2017-12-19 9:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20171216T125008Z.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20171216T125008Z/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20171216T125008Z/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20171216T125008Z.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
1.27user 0.38system 0:03.69elapsed 44%CPU (0avgtext+0avgdata 44208maxresident)k
0inputs+0outputs (0major+2916minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171216T125008Z.jebBVh/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2017-12-04 8:11 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2017-12-04 8:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20171127.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20171127/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 136, in __init__
self.set_chroot_path()
File "modules/generic_stage_target.py", line 449, in set_chroot_path
self.chroot_lock=catalyst_lock.LockDir(self.settings["chroot_path"])
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 29, in __init__
self.set_lockdir(lockdir)
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 66, in set_lockdir
os.makedirs(lockdir)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20171127/'
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
1.35user 0.35system 0:02.58elapsed 66%CPU (0avgtext+0avgdata 44160maxresident)k
0inputs+0outputs (0major+2918minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171127.yNT9cq/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2017-11-26 12:12 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2017-11-26 12:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20171104.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20171104/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20171104/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 137, in __init__
self.set_autoresume_path()
File "modules/generic_stage_target.py", line 459, in set_autoresume_path
os.makedirs(self.settings["autoresume_path"],0755)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20171104/'
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
3.68user 1.33system 0:05.19elapsed 96%CPU (0avgtext+0avgdata 44160maxresident)k
0inputs+0outputs (0major+3238minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171104.i1CWc5/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2017-11-03 16:01 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2017-11-03 16:01 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20171025.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20171025/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20171025/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20171025.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
1.24user 0.39system 0:01.68elapsed 97%CPU (0avgtext+0avgdata 44192maxresident)k
0inputs+0outputs (0major+2913minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171025.Si2SbV/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2017-10-24 21:33 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2017-10-24 21:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20171021.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20171021/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 136, in __init__
self.set_chroot_path()
File "modules/generic_stage_target.py", line 449, in set_chroot_path
self.chroot_lock=catalyst_lock.LockDir(self.settings["chroot_path"])
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 29, in __init__
self.set_lockdir(lockdir)
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 66, in set_lockdir
os.makedirs(lockdir)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20171021/'
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Command exited with non-zero status 1
1.22user 0.38system 0:01.65elapsed 97%CPU (0avgtext+0avgdata 44608maxresident)k
0inputs+0outputs (0major+2902minor)pagefaults 0swaps
Full build log at /tmp/catalyst-auto.20171021.vlHlqm/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2016-03-16 23:42 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2016-03-16 23:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160316.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160316/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20160316/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160316.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.LuL2Wv/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2016-03-16 21:56 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2016-03-16 21:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160316.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160316/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20160316/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160316.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.rh7pNU/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2016-01-29 14:19 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2016-01-29 14:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160129.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160129/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20160129/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160129.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.TfdPdx/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2016-01-22 14:08 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2016-01-22 14:08 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160122.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160122/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20160122/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160122.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.dWVZsb/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2016-01-15 13:37 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2016-01-15 13:37 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160115.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160115/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20160115/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160115.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.ZqPAob/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2016-01-08 13:31 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2016-01-08 13:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160108.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160108/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20160108/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160108.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.7kyq5r/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2016-01-01 13:35 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2016-01-01 13:35 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20160101.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20160101/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20160101/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20160101.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.li9tUH/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-12-25 13:31 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-12-25 13:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20151225.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20151225/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20151225/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20151225.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.D0D9HF/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-12-18 13:30 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-12-18 13:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20151218.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20151218/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20151218/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20151218.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.ALZx2K/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-12-11 13:30 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-12-11 13:30 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20151211.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20151211/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20151211/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20151211.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.tbr9hy/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-09-14 21:22 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-09-14 21:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150911.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150911/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150911/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150911.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.hWh0sI/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-09-07 20:39 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-09-07 20:39 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150904.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150904/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150904/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150904.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.o0DPqg/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-08-31 23:09 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-08-31 23:09 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150828.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150828/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150828/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150828.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.seEKYL/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-08-24 21:40 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-08-24 21:40 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150821.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150821/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150821/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150821.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.XtidJ7/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-08-18 2:42 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-08-18 2:42 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150814.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150814/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150814/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150814.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.9OTzMS/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-08-11 3:27 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-08-11 3:27 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150807.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150807/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150807/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150807.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.ymqAY0/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-08-03 22:33 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-08-03 22:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150731.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150731/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150731/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150731.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.PsEE2a/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-07-27 20:32 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-07-27 20:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150724.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150724/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150724/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150724.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.gIyqqU/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-07-21 7:25 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-07-21 7:25 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150717.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150717/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150717/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150717.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.2Ix5Gh/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-07-13 19:43 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-07-13 19:43 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150710.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150710/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150710/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150710.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.40GJX5/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-07-06 20:56 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-07-06 20:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150703.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150703/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150703/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150703.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.xO181i/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-06-29 18:36 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-06-29 18:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150626.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150626/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150626/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150626.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.b9JncU/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-06-23 4:56 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-06-23 4:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150619.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150619/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150619/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150619.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.8QofVg/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-06-13 8:24 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-06-13 8:24 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150612.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150612/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150612/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150612.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.p4Y22i/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-06-06 16:58 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-06-06 16:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150605.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150605/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150605/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150605.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.53YBiW/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-06-01 15:12 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-06-01 15:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150529.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150529/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150529/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150529.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.bXzHzJ/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-05-25 4:56 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-05-25 4:56 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150522.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150522/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150522/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150522.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.HH7Pwm/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-05-17 18:19 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-05-17 18:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150515.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150515/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150515/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150515.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.AalGIc/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-05-10 18:02 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-05-10 18:02 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150508.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150508/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150508/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150508.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.DcDxdU/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-05-03 21:19 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-05-03 21:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150501.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150501/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150501/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150501.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.2AIbcB/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-04-27 16:49 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-04-27 16:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150424.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150424/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150424/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150424.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.H3urUh/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-04-21 0:31 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-04-21 0:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150417.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150417/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150417/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150417.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.yoO4v6/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-04-13 18:05 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-04-13 18:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150410.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150410/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150410/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150410.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.mAI47n/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-04-08 1:03 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-04-08 1:03 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150403.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150403/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150403/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150403.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.p50aPE/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-03-27 7:54 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-03-27 7:54 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150327.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150327/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150327/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150327.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.t26Ald/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-03-20 8:06 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-03-20 8:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150320.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150320/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150320/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150320.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.8mYu8J/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-03-13 7:58 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-03-13 7:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150313.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150313/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150313/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150313.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.79IUxY/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-03-06 9:32 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-03-06 9:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150306.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150306/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150306/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150306.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.4EzM0H/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-02-27 15:50 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-02-27 15:50 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150227.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150227/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150227/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150227.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.xGxr9s/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-02-20 9:11 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-02-20 9:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150220.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150220/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150220/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150220.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.lQXi4B/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-02-06 8:59 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-02-06 8:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150206.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150206/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150206/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150206.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.aX1Qg2/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-01-30 8:59 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-01-30 8:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150130.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150130/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150130/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150130.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.EE4We7/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-01-23 8:58 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-01-23 8:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150123.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150123/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150123/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150123.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.cpn6Pk/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-01-22 19:33 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-01-22 19:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20150116/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20150116.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150116/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150116/
Location of the package cache is /usr/local/catalyst/packages/default/netboot2-hppa1.1-20150116/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150116/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150116/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20150116/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20150116/
to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20150116/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20150116//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20150116/.catalyst_lock'
Full build log at /tmp/catalyst-auto.riayzO/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-01-09 8:52 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-01-09 8:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150109.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150109/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150109/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150109.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.QHIWOK/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-01-02 18:46 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-01-02 18:46 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150102.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150102/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150102/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150102.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.ti2JQx/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2015-01-02 9:15 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2015-01-02 9:15 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20150102.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20150102/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20150102/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20150102.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.1009/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-12-26 8:52 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-12-26 8:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141226.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141226/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141226/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141226.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.19286/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-12-19 8:54 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-12-19 8:54 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141219.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141219/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141219/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141219.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.30898/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-12-12 9:39 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-12-12 9:39 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141212.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141212/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141212/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141212.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.18549/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-12-10 14:31 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-12-10 14:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20141205/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20141205.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141205/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141205/
Location of the package cache is /usr/local/catalyst/packages/default/netboot2-hppa1.1-20141205/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141205/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141205/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20141205/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20141205/
to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20141205/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20141205//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20141205/.catalyst_lock'
Full build log at /tmp/catalyst-auto.14352/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-12-02 9:13 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-12-02 9:13 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141128.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141128/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141128/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141128.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.24108/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-11-24 21:19 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-11-24 21:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141121.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141121/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141121/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141121.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.19106/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-11-19 23:36 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-11-19 23:36 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141114.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141114/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141114/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141114.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.27192/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-11-13 6:26 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-11-13 6:26 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141107.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141107/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141107/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141107.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.23936/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-11-03 22:31 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-11-03 22:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141031.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141031/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141031/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141031.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.3830/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-10-28 18:05 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-10-28 18:05 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141024.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141024/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141024/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141024.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.5701/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-10-18 9:48 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-10-18 9:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141017.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141017/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141017/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141017.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.23296/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-10-10 7:48 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-10-10 7:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141010.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141010/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141010/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141010.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.3357/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-10-03 7:49 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-10-03 7:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20141003.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20141003/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20141003/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20141003.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.12941/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-09-26 7:55 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-09-26 7:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140926.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140926/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140926/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140926.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.4036/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-09-19 7:58 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-09-19 7:58 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140919.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140919/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140919/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140919.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.8385/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-09-09 14:11 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-09-09 14:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140905/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20140905.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140905/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140905/
Location of the package cache is /usr/local/catalyst/packages/default/netboot2-hppa1.1-20140905/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140905/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140905/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140905/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140905/
to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140905/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140905//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140905/.catalyst_lock'
Full build log at /tmp/catalyst-auto.10223/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-09-02 11:37 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-09-02 11:37 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140829/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20140829.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140829/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140829/
Location of the package cache is /usr/local/catalyst/packages/default/netboot2-hppa1.1-20140829/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140829/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140829/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140829/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140829/
to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140829/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140829//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140829/.catalyst_lock'
Full build log at /tmp/catalyst-auto.12580/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-08-27 5:41 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-08-27 5:41 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140822/
If this is not desired, remove this directory or turn off
seedcache in the options of catalyst.conf the source path
will then be /usr/local/catalyst/builds/default/stage3-hppa1.1-20140822.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140822/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140822/
Location of the package cache is /usr/local/catalyst/packages/default/netboot2-hppa1.1-20140822/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140822/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140822/
clearing chroot ...
Emptying directory /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140822/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Starting rsync from /usr/local/catalyst/tmp/default/stage3-hppa1.1-20140822/
to /usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140822/ (This may take some time) ...
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
cp: cannot create regular file '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140822//tmp/envscript': No such file or directory
!!! catalyst: Could not copy envscript into place.
/proc is still mounted; performing auto-bind-umount... Auto-unbind successful...
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1018, in chroot_setup
"Could not copy envscript into place.",env=self.env)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
lockfile does not exist '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140822/.catalyst_lock'
Full build log at /tmp/catalyst-auto.7832/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-08-15 7:57 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-08-15 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140815.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140815/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140815/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140815.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.26091/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-08-08 7:57 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-08-08 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140808.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140808/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140808/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140808.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.9682/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-08-01 7:57 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-08-01 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140801.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140801/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140801/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140801.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.24446/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-07-25 7:57 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-07-25 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140725.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140725/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140725/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140725.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.30359/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-07-18 7:59 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-07-18 7:59 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140718.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140718/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140718/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140718.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.16418/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-07-11 7:55 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-07-11 7:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140711.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140711/
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 136, in __init__
self.set_chroot_path()
File "modules/generic_stage_target.py", line 449, in set_chroot_path
self.chroot_lock=catalyst_lock.LockDir(self.settings["chroot_path"])
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 29, in __init__
self.set_lockdir(lockdir)
File "/usr/lib/catalyst/modules/catalyst_lock.py", line 66, in set_lockdir
os.makedirs(lockdir)
File "/usr/lib/python2.7/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/usr/local/catalyst/tmp/default/netboot2-hppa1.1-20140711/'
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.13626/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread* [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec
@ 2014-07-04 7:57 catalyst
0 siblings, 0 replies; 96+ messages in thread
From: catalyst @ 2014-07-04 7:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.17
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting sharedir to config file value "/usr/lib/catalyst"
Setting snapshot_cache to config file value "/usr/local/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/usr/local/catalyst"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: netboot2
Building natively for hppa
Source path set to /usr/local/catalyst/builds/default/stage3-hppa1.1-20140704.tar.bz2
Caching snapshot to /usr/local/catalyst/snapshot_cache/20140704/
The autoresume path is /usr/local/catalyst/tmp/default/.autoresume-netboot2-hppa1.1-20140704/
!!! catalyst: Cannot locate specified source_path: /usr/local/catalyst/builds/default/stage3-hppa1.1-20140704.tar.bz2
Traceback (most recent call last):
File "/usr/lib/catalyst/catalyst", line 216, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/netboot2_target.py", line 41, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 170, in __init__
expand=0)
File "/usr/lib/catalyst/modules/catalyst_support.py", line 571, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target netboot2
Catalyst aborting....
Full build log at /tmp/catalyst-auto.25415/log/netboot2-hppa32.log
^ permalink raw reply [flat|nested] 96+ messages in thread
end of thread, other threads:[~2020-03-19 1:10 UTC | newest]
Thread overview: 96+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-13 9:00 [gentoo-releng-autobuilds] [hppa-auto] Catalyst fatal build error - netboot2-hppa32.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2020-03-19 1:10 catalyst
2020-03-10 5:33 catalyst
2020-02-04 3:38 catalyst
2020-01-04 5:55 catalyst
2019-10-04 9:18 catalyst
2019-09-06 21:14 catalyst
2019-06-02 17:20 catalyst
2019-03-05 4:51 catalyst
2019-03-03 3:16 catalyst
2019-02-02 12:11 catalyst
2019-01-03 17:52 catalyst
2018-12-05 17:12 catalyst
2018-09-14 18:19 catalyst
2018-08-03 17:16 catalyst
2018-06-09 17:26 catalyst
2018-04-14 20:33 catalyst
2018-04-08 19:50 catalyst
2018-02-23 3:34 catalyst
2017-12-19 9:46 catalyst
2017-12-04 8:11 catalyst
2017-11-26 12:12 catalyst
2017-11-03 16:01 catalyst
2017-10-24 21:33 catalyst
2016-03-16 23:42 catalyst
2016-03-16 21:56 catalyst
2016-01-29 14:19 catalyst
2016-01-22 14:08 catalyst
2016-01-15 13:37 catalyst
2016-01-08 13:31 catalyst
2016-01-01 13:35 catalyst
2015-12-25 13:31 catalyst
2015-12-18 13:30 catalyst
2015-12-11 13:30 catalyst
2015-09-14 21:22 catalyst
2015-09-07 20:39 catalyst
2015-08-31 23:09 catalyst
2015-08-24 21:40 catalyst
2015-08-18 2:42 catalyst
2015-08-11 3:27 catalyst
2015-08-03 22:33 catalyst
2015-07-27 20:32 catalyst
2015-07-21 7:25 catalyst
2015-07-13 19:43 catalyst
2015-07-06 20:56 catalyst
2015-06-29 18:36 catalyst
2015-06-23 4:56 catalyst
2015-06-13 8:24 catalyst
2015-06-06 16:58 catalyst
2015-06-01 15:12 catalyst
2015-05-25 4:56 catalyst
2015-05-17 18:19 catalyst
2015-05-10 18:02 catalyst
2015-05-03 21:19 catalyst
2015-04-27 16:49 catalyst
2015-04-21 0:31 catalyst
2015-04-13 18:05 catalyst
2015-04-08 1:03 catalyst
2015-03-27 7:54 catalyst
2015-03-20 8:06 catalyst
2015-03-13 7:58 catalyst
2015-03-06 9:32 catalyst
2015-02-27 15:50 catalyst
2015-02-20 9:11 catalyst
2015-02-06 8:59 catalyst
2015-01-30 8:59 catalyst
2015-01-23 8:58 catalyst
2015-01-22 19:33 catalyst
2015-01-09 8:52 catalyst
2015-01-02 18:46 catalyst
2015-01-02 9:15 catalyst
2014-12-26 8:52 catalyst
2014-12-19 8:54 catalyst
2014-12-12 9:39 catalyst
2014-12-10 14:31 catalyst
2014-12-02 9:13 catalyst
2014-11-24 21:19 catalyst
2014-11-19 23:36 catalyst
2014-11-13 6:26 catalyst
2014-11-03 22:31 catalyst
2014-10-28 18:05 catalyst
2014-10-18 9:48 catalyst
2014-10-10 7:48 catalyst
2014-10-03 7:49 catalyst
2014-09-26 7:55 catalyst
2014-09-19 7:58 catalyst
2014-09-09 14:11 catalyst
2014-09-02 11:37 catalyst
2014-08-27 5:41 catalyst
2014-08-15 7:57 catalyst
2014-08-08 7:57 catalyst
2014-08-01 7:57 catalyst
2014-07-25 7:57 catalyst
2014-07-18 7:59 catalyst
2014-07-11 7:55 catalyst
2014-07-04 7:57 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox