* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-02-11 3:07 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-02-11 3:07 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
The autoresume path is /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150211/
stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150211/tmp/stage1root
Location of the package cache is /home/release/buildroot/x86-dev/packages/default/stage1-i686-20150211/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150211/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150211/
clearing chroot ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150211/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150211/
Emptying directory /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150211/
Starting tar extract from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150211/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150211///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150211//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150211//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150211/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014i-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.6.1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.18.2-r2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.14 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.4:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150211/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.YUrYOv/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-12-15 2:57 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-12-15 2:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f /release/tmp/run/catalyst-auto.20201214T214503Z.QTGX0s/specs/i686/stage1.spec
15 Dec 2020 02:57:41 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
15 Dec 2020 02:57:41 UTC: NOTICE : conf_values[options] = {'snapcache', 'preserve_libs', 'clear-autoresume', 'autoresume', 'seedcache', 'bindist', 'kerncache', 'pkgcache'}
15 Dec 2020 02:57:41 UTC: NOTICE : Processing spec file: /release/tmp/run/catalyst-auto.20201214T214503Z.QTGX0s/specs/i686/stage1.spec
15 Dec 2020 02:57:41 UTC: NOTICE : Using target: stage1
15 Dec 2020 02:57:41 UTC: NOTICE : Source file specification matching setting is: loose
15 Dec 2020 02:57:41 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
15 Dec 2020 02:57:43 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
15 Dec 2020 02:57:43 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/tmp/stage1root
15 Dec 2020 02:57:43 UTC: NOTICE : Removing AutoResume Points ...
15 Dec 2020 02:57:43 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20201214T214503Z
15 Dec 2020 02:57:43 UTC: NOTICE : --- Running action sequence: unpack
15 Dec 2020 02:57:43 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
15 Dec 2020 02:57:43 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
15 Dec 2020 02:57:43 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
15 Dec 2020 02:57:43 UTC: NOTICE : Removing AutoResume Points ...
15 Dec 2020 02:57:43 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20201214T214503Z
15 Dec 2020 02:57:43 UTC: NOTICE : Clearing the chroot path ...
15 Dec 2020 02:57:43 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z
15 Dec 2020 02:57:43 UTC: NOTICE : Starting auto from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
15 Dec 2020 02:57:43 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z (this may take some time) ..
15 Dec 2020 02:57:49 UTC: NOTICE : --- Running action sequence: unpack_snapshot
15 Dec 2020 02:57:49 UTC: NOTICE : --- Running action sequence: setup_confdir
15 Dec 2020 02:57:49 UTC: NOTICE : --- Running action sequence: portage_overlay
15 Dec 2020 02:57:49 UTC: NOTICE : --- Running action sequence: base_dirs
15 Dec 2020 02:57:49 UTC: NOTICE : --- Running action sequence: bind
15 Dec 2020 02:57:49 UTC: NOTICE : --- Running action sequence: chroot_setup
15 Dec 2020 02:57:49 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
15 Dec 2020 02:57:49 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
WARNING:catalyst:Overriding certain env variables may cause catastrophic failure.
15 Dec 2020 02:57:49 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
15 Dec 2020 02:57:49 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
WARNING:catalyst:Catalyst assumes you know what you are doing when setting these variables.
15 Dec 2020 02:57:49 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
WARNING:catalyst:Catalyst Maintainers use VERY minimal envscripts, if used at all.
15 Dec 2020 02:57:49 UTC: WARNING : You have been warned.
WARNING:catalyst:You have been warned.
15 Dec 2020 02:57:49 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/etc/portage/make.conf
15 Dec 2020 02:57:49 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
15 Dec 2020 02:57:49 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
15 Dec 2020 02:57:49 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Traceback (most recent call last):
File "/tmp/build.py", line 5, in <module>
import portage
ModuleNotFoundError: No module named 'portage'
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
15 Dec 2020 02:57:51 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
15 Dec 2020 02:57:51 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
15 Dec 2020 02:57:52 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
15 Dec 2020 02:57:52 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1409, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1514, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1418, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1409, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1514, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1418, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
15 Dec 2020 02:57:52 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/tmp/kerncache is not a mount point. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/cache/binpkgs is not a mount point. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/tmp/stage1root/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/tmp/stage1root/proc is not a mount point. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/run is not a mount point. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/dev/shm does not exist. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/dev/pts does not exist. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/tmp/portage is not a mount point. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/cache/distfiles is not a mount point. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/var/db/repos/gentoo is not a mount point. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/dev is not a mount point. Skipping
15 Dec 2020 02:57:52 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201214T214503Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
23.47user 5.66system 0:10.39elapsed 280%CPU (0avgtext+0avgdata 356804maxresident)k
423208inputs+2180192outputs (1major+145901minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20201214T214503Z.QTGX0s/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-11-30 23:49 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-11-30 23:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f /release/tmp/run/catalyst-auto.20201130T214503Z.y2oTo2/specs/i686/stage1.spec
30 Nov 2020 23:49:16 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
30 Nov 2020 23:49:16 UTC: NOTICE : conf_values[options] = {'pkgcache', 'seedcache', 'bindist', 'autoresume', 'preserve_libs', 'clear-autoresume', 'snapcache', 'kerncache'}
30 Nov 2020 23:49:16 UTC: NOTICE : Processing spec file: /release/tmp/run/catalyst-auto.20201130T214503Z.y2oTo2/specs/i686/stage1.spec
30 Nov 2020 23:49:16 UTC: NOTICE : Using target: stage1
30 Nov 2020 23:49:16 UTC: NOTICE : Source file specification matching setting is: loose
30 Nov 2020 23:49:16 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
30 Nov 2020 23:49:17 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
30 Nov 2020 23:49:17 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/tmp/stage1root
30 Nov 2020 23:49:17 UTC: NOTICE : Removing AutoResume Points ...
30 Nov 2020 23:49:17 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20201130T214503Z
30 Nov 2020 23:49:17 UTC: NOTICE : --- Running action sequence: unpack
30 Nov 2020 23:49:17 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
30 Nov 2020 23:49:17 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
30 Nov 2020 23:49:17 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
30 Nov 2020 23:49:17 UTC: NOTICE : Removing AutoResume Points ...
30 Nov 2020 23:49:17 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20201130T214503Z
30 Nov 2020 23:49:17 UTC: NOTICE : Clearing the chroot path ...
30 Nov 2020 23:49:17 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z
30 Nov 2020 23:49:17 UTC: NOTICE : Starting auto from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
30 Nov 2020 23:49:17 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z (this may take some time) ..
30 Nov 2020 23:49:23 UTC: NOTICE : --- Running action sequence: unpack_snapshot
30 Nov 2020 23:49:23 UTC: NOTICE : --- Running action sequence: setup_confdir
30 Nov 2020 23:49:23 UTC: NOTICE : --- Running action sequence: portage_overlay
30 Nov 2020 23:49:23 UTC: NOTICE : --- Running action sequence: base_dirs
30 Nov 2020 23:49:23 UTC: NOTICE : --- Running action sequence: bind
30 Nov 2020 23:49:23 UTC: NOTICE : --- Running action sequence: chroot_setup
30 Nov 2020 23:49:23 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
30 Nov 2020 23:49:23 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
WARNING:catalyst:Overriding certain env variables may cause catastrophic failure.
30 Nov 2020 23:49:23 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
30 Nov 2020 23:49:23 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
WARNING:catalyst:Catalyst assumes you know what you are doing when setting these variables.
30 Nov 2020 23:49:23 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
WARNING:catalyst:Catalyst Maintainers use VERY minimal envscripts, if used at all.
30 Nov 2020 23:49:23 UTC: WARNING : You have been warned.
WARNING:catalyst:You have been warned.
30 Nov 2020 23:49:23 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/etc/portage/make.conf
30 Nov 2020 23:49:23 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
30 Nov 2020 23:49:23 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
30 Nov 2020 23:49:23 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Traceback (most recent call last):
File "/tmp/build.py", line 5, in <module>
import portage
ModuleNotFoundError: No module named 'portage'
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
30 Nov 2020 23:49:26 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/tmp/portage is not a mount point. Skipping
30 Nov 2020 23:49:26 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
30 Nov 2020 23:49:26 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
30 Nov 2020 23:49:26 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/tmp/kerncache is not a mount point. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/cache/binpkgs is not a mount point. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/tmp/stage1root/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/tmp/stage1root/proc is not a mount point. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/run is not a mount point. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/dev/shm does not exist. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/dev/pts does not exist. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/tmp/portage is not a mount point. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/cache/distfiles is not a mount point. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/var/db/repos/gentoo is not a mount point. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/dev is not a mount point. Skipping
30 Nov 2020 23:49:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201130T214503Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
23.57user 5.66system 0:10.55elapsed 276%CPU (0avgtext+0avgdata 360932maxresident)k
424224inputs+2180192outputs (1major+153325minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20201130T214503Z.y2oTo2/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-11-23 23:44 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-11-23 23:44 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f /release/tmp/run/catalyst-auto.20201123T214503Z.X8rkUm/specs/i686/stage1.spec
23 Nov 2020 23:43:58 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
23 Nov 2020 23:43:58 UTC: NOTICE : conf_values[options] = {'kerncache', 'bindist', 'preserve_libs', 'clear-autoresume', 'autoresume', 'snapcache', 'seedcache', 'pkgcache'}
23 Nov 2020 23:43:58 UTC: NOTICE : Processing spec file: /release/tmp/run/catalyst-auto.20201123T214503Z.X8rkUm/specs/i686/stage1.spec
23 Nov 2020 23:43:58 UTC: NOTICE : Using target: stage1
23 Nov 2020 23:43:58 UTC: NOTICE : Source file specification matching setting is: loose
23 Nov 2020 23:43:58 UTC: NOTICE : Accepted source file extensions search order: ['tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'squashfs', 'sfs', 'tar.gz', 'gz', 'tar']
23 Nov 2020 23:44:00 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
23 Nov 2020 23:44:00 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/tmp/stage1root
23 Nov 2020 23:44:00 UTC: NOTICE : Removing AutoResume Points ...
23 Nov 2020 23:44:00 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20201123T214503Z
23 Nov 2020 23:44:00 UTC: NOTICE : --- Running action sequence: unpack
23 Nov 2020 23:44:00 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
23 Nov 2020 23:44:00 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
23 Nov 2020 23:44:00 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
23 Nov 2020 23:44:00 UTC: NOTICE : Removing AutoResume Points ...
23 Nov 2020 23:44:00 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20201123T214503Z
23 Nov 2020 23:44:00 UTC: NOTICE : Clearing the chroot path ...
23 Nov 2020 23:44:00 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z
23 Nov 2020 23:44:00 UTC: NOTICE : Starting auto from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
23 Nov 2020 23:44:00 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z (this may take some time) ..
23 Nov 2020 23:44:05 UTC: NOTICE : --- Running action sequence: unpack_snapshot
23 Nov 2020 23:44:05 UTC: NOTICE : --- Running action sequence: setup_confdir
23 Nov 2020 23:44:05 UTC: NOTICE : --- Running action sequence: portage_overlay
23 Nov 2020 23:44:05 UTC: NOTICE : --- Running action sequence: base_dirs
23 Nov 2020 23:44:05 UTC: NOTICE : --- Running action sequence: bind
23 Nov 2020 23:44:06 UTC: NOTICE : --- Running action sequence: chroot_setup
23 Nov 2020 23:44:06 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
23 Nov 2020 23:44:06 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
WARNING:catalyst:Overriding certain env variables may cause catastrophic failure.
23 Nov 2020 23:44:06 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
23 Nov 2020 23:44:06 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
WARNING:catalyst:Catalyst assumes you know what you are doing when setting these variables.
23 Nov 2020 23:44:06 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
WARNING:catalyst:Catalyst Maintainers use VERY minimal envscripts, if used at all.
23 Nov 2020 23:44:06 UTC: WARNING : You have been warned.
WARNING:catalyst:You have been warned.
23 Nov 2020 23:44:06 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/etc/portage/make.conf
23 Nov 2020 23:44:06 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
23 Nov 2020 23:44:06 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
23 Nov 2020 23:44:06 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Traceback (most recent call last):
File "/tmp/build.py", line 5, in <module>
import portage
ModuleNotFoundError: No module named 'portage'
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
23 Nov 2020 23:44:08 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/tmp/portage is not a mount point. Skipping
23 Nov 2020 23:44:08 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
23 Nov 2020 23:44:08 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
23 Nov 2020 23:44:08 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/tmp/kerncache is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/tmp/kerncache is not a mount point. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/cache/binpkgs is not a mount point. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/tmp/stage1root/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/tmp/stage1root/proc is not a mount point. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/run is not a mount point. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/dev/shm does not exist. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/dev/pts does not exist. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/tmp/portage is not a mount point. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/cache/distfiles is not a mount point. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/var/db/repos/gentoo is not a mount point. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/dev is not a mount point. Skipping
23 Nov 2020 23:44:08 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20201123T214503Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
23.68user 5.55system 0:10.37elapsed 281%CPU (0avgtext+0avgdata 357572maxresident)k
424560inputs+2180192outputs (9major+152507minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20201123T214503Z.X8rkUm/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-09-30 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-09-30 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
30 Sep 2020 03:00:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
30 Sep 2020 03:00:26 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'bindist', 'clear-autoresume', 'pkgcache'}
30 Sep 2020 03:00:26 UTC: NOTICE : Processing spec file: i686/stage1.spec
30 Sep 2020 03:00:26 UTC: NOTICE : Using target: stage1
30 Sep 2020 03:00:26 UTC: NOTICE : Source file specification matching setting is: loose
30 Sep 2020 03:00:26 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
30 Sep 2020 03:00:27 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
30 Sep 2020 03:00:27 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200930T030004Z/tmp/stage1root
30 Sep 2020 03:00:27 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.71user 0.03system 0:00.82elapsed 92%CPU (0avgtext+0avgdata 16948maxresident)k
0inputs+0outputs (0major+9766minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200930T030004Z.tjQIRb/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-09-23 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-09-23 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
23 Sep 2020 03:00:31 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
23 Sep 2020 03:00:31 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'pkgcache', 'bindist', 'clear-autoresume'}
23 Sep 2020 03:00:31 UTC: NOTICE : Processing spec file: i686/stage1.spec
23 Sep 2020 03:00:31 UTC: NOTICE : Using target: stage1
23 Sep 2020 03:00:31 UTC: NOTICE : Source file specification matching setting is: loose
23 Sep 2020 03:00:31 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
23 Sep 2020 03:00:32 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
23 Sep 2020 03:00:32 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200923T030003Z/tmp/stage1root
23 Sep 2020 03:00:32 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.72user 0.03system 0:00.79elapsed 95%CPU (0avgtext+0avgdata 17008maxresident)k
0inputs+0outputs (0major+9753minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200923T030003Z.TxeBjE/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-09-16 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-09-16 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
16 Sep 2020 03:00:33 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
16 Sep 2020 03:00:33 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'bindist', 'pkgcache', 'clear-autoresume'}
16 Sep 2020 03:00:33 UTC: NOTICE : Processing spec file: i686/stage1.spec
16 Sep 2020 03:00:33 UTC: NOTICE : Using target: stage1
16 Sep 2020 03:00:33 UTC: NOTICE : Source file specification matching setting is: loose
16 Sep 2020 03:00:33 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
16 Sep 2020 03:00:34 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
16 Sep 2020 03:00:34 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200916T030003Z/tmp/stage1root
16 Sep 2020 03:00:34 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.74user 0.01system 0:00.82elapsed 91%CPU (0avgtext+0avgdata 17052maxresident)k
0inputs+0outputs (0major+9794minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200916T030003Z.Gg6IyK/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-09-09 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-09-09 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
09 Sep 2020 03:00:31 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
09 Sep 2020 03:00:31 UTC: NOTICE : conf_values[options] = {'bindist', 'clear-autoresume', 'preserve_libs', 'pkgcache'}
09 Sep 2020 03:00:31 UTC: NOTICE : Processing spec file: i686/stage1.spec
09 Sep 2020 03:00:31 UTC: NOTICE : Using target: stage1
09 Sep 2020 03:00:31 UTC: NOTICE : Source file specification matching setting is: loose
09 Sep 2020 03:00:31 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
09 Sep 2020 03:00:32 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
09 Sep 2020 03:00:32 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200909T030003Z/tmp/stage1root
09 Sep 2020 03:00:32 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.69user 0.06system 0:00.82elapsed 92%CPU (0avgtext+0avgdata 17036maxresident)k
0inputs+0outputs (0major+9749minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200909T030003Z.M6m9xo/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-09-02 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-09-02 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
02 Sep 2020 03:00:23 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
02 Sep 2020 03:00:23 UTC: NOTICE : conf_values[options] = {'pkgcache', 'preserve_libs', 'clear-autoresume', 'bindist'}
02 Sep 2020 03:00:23 UTC: NOTICE : Processing spec file: i686/stage1.spec
02 Sep 2020 03:00:23 UTC: NOTICE : Using target: stage1
02 Sep 2020 03:00:23 UTC: NOTICE : Source file specification matching setting is: loose
02 Sep 2020 03:00:23 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
02 Sep 2020 03:00:24 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
02 Sep 2020 03:00:24 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200902T030003Z/tmp/stage1root
02 Sep 2020 03:00:24 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.72user 0.02system 0:00.82elapsed 92%CPU (0avgtext+0avgdata 16852maxresident)k
0inputs+0outputs (0major+9716minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200902T030003Z.0jBFGB/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-08-26 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-08-26 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
26 Aug 2020 03:00:23 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
26 Aug 2020 03:00:23 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'clear-autoresume', 'bindist', 'pkgcache'}
26 Aug 2020 03:00:23 UTC: NOTICE : Processing spec file: i686/stage1.spec
26 Aug 2020 03:00:23 UTC: NOTICE : Using target: stage1
26 Aug 2020 03:00:23 UTC: NOTICE : Source file specification matching setting is: loose
26 Aug 2020 03:00:23 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
26 Aug 2020 03:00:23 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
26 Aug 2020 03:00:23 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200826T030003Z/tmp/stage1root
26 Aug 2020 03:00:23 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.67user 0.09system 0:00.80elapsed 94%CPU (0avgtext+0avgdata 17040maxresident)k
0inputs+8outputs (0major+9711minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200826T030003Z.x0XTIm/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-08-19 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-08-19 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
19 Aug 2020 03:00:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
19 Aug 2020 03:00:32 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'pkgcache', 'preserve_libs', 'bindist'}
19 Aug 2020 03:00:32 UTC: NOTICE : Processing spec file: i686/stage1.spec
19 Aug 2020 03:00:33 UTC: NOTICE : Using target: stage1
19 Aug 2020 03:00:33 UTC: NOTICE : Source file specification matching setting is: loose
19 Aug 2020 03:00:33 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
19 Aug 2020 03:00:33 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
19 Aug 2020 03:00:33 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200819T030003Z/tmp/stage1root
19 Aug 2020 03:00:33 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.68user 0.08system 0:00.88elapsed 86%CPU (0avgtext+0avgdata 17044maxresident)k
0inputs+0outputs (0major+9723minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200819T030003Z.10xXse/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-08-12 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-08-12 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
12 Aug 2020 03:00:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
12 Aug 2020 03:00:32 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'bindist', 'clear-autoresume', 'pkgcache'}
12 Aug 2020 03:00:32 UTC: NOTICE : Processing spec file: i686/stage1.spec
12 Aug 2020 03:00:32 UTC: NOTICE : Using target: stage1
12 Aug 2020 03:00:32 UTC: NOTICE : Source file specification matching setting is: loose
12 Aug 2020 03:00:32 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
12 Aug 2020 03:00:34 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
12 Aug 2020 03:00:34 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200812T030003Z/tmp/stage1root
12 Aug 2020 03:00:34 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.75user 0.12system 0:02.62elapsed 33%CPU (0avgtext+0avgdata 16996maxresident)k
449776inputs+0outputs (0major+9704minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200812T030003Z.2jisiy/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-08-05 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-08-05 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
05 Aug 2020 03:00:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
05 Aug 2020 03:00:32 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'pkgcache', 'preserve_libs', 'bindist'}
05 Aug 2020 03:00:32 UTC: NOTICE : Processing spec file: i686/stage1.spec
05 Aug 2020 03:00:32 UTC: NOTICE : Using target: stage1
05 Aug 2020 03:00:32 UTC: NOTICE : Source file specification matching setting is: loose
05 Aug 2020 03:00:32 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
05 Aug 2020 03:00:32 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
05 Aug 2020 03:00:32 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200805T030004Z/tmp/stage1root
05 Aug 2020 03:00:32 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.73user 0.03system 0:00.84elapsed 91%CPU (0avgtext+0avgdata 17024maxresident)k
0inputs+0outputs (0major+9722minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200805T030004Z.86g577/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-07-29 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-07-29 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
29 Jul 2020 03:00:23 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
29 Jul 2020 03:00:23 UTC: NOTICE : conf_values[options] = {'pkgcache', 'preserve_libs', 'clear-autoresume', 'bindist'}
29 Jul 2020 03:00:23 UTC: NOTICE : Processing spec file: i686/stage1.spec
29 Jul 2020 03:00:23 UTC: NOTICE : Using target: stage1
29 Jul 2020 03:00:23 UTC: NOTICE : Source file specification matching setting is: loose
29 Jul 2020 03:00:23 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
29 Jul 2020 03:00:23 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
29 Jul 2020 03:00:23 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200729T030003Z/tmp/stage1root
29 Jul 2020 03:00:23 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.71user 0.04system 0:00.82elapsed 93%CPU (0avgtext+0avgdata 16924maxresident)k
0inputs+0outputs (0major+9734minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200729T030003Z.NAp2Xt/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-07-22 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-07-22 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
22 Jul 2020 03:00:22 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
22 Jul 2020 03:00:22 UTC: NOTICE : conf_values[options] = {'bindist', 'preserve_libs', 'clear-autoresume', 'pkgcache'}
22 Jul 2020 03:00:22 UTC: NOTICE : Processing spec file: i686/stage1.spec
22 Jul 2020 03:00:22 UTC: NOTICE : Using target: stage1
22 Jul 2020 03:00:22 UTC: NOTICE : Source file specification matching setting is: loose
22 Jul 2020 03:00:22 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
22 Jul 2020 03:00:23 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
22 Jul 2020 03:00:23 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200722T030002Z/tmp/stage1root
22 Jul 2020 03:00:23 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.73user 0.02system 0:00.84elapsed 90%CPU (0avgtext+0avgdata 17048maxresident)k
0inputs+0outputs (0major+9728minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200722T030002Z.9bHy8c/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-07-15 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-07-15 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
15 Jul 2020 03:00:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
15 Jul 2020 03:00:32 UTC: NOTICE : conf_values[options] = {'bindist', 'preserve_libs', 'clear-autoresume', 'pkgcache'}
15 Jul 2020 03:00:32 UTC: NOTICE : Processing spec file: i686/stage1.spec
15 Jul 2020 03:00:32 UTC: NOTICE : Using target: stage1
15 Jul 2020 03:00:32 UTC: NOTICE : Source file specification matching setting is: loose
15 Jul 2020 03:00:32 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
15 Jul 2020 03:00:33 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
15 Jul 2020 03:00:33 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200715T030003Z/tmp/stage1root
15 Jul 2020 03:00:33 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.72user 0.04system 0:00.82elapsed 93%CPU (0avgtext+0avgdata 16916maxresident)k
0inputs+0outputs (0major+9759minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200715T030003Z.9kFA7L/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-07-08 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-07-08 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
08 Jul 2020 03:00:21 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
08 Jul 2020 03:00:21 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'pkgcache', 'clear-autoresume', 'bindist'}
08 Jul 2020 03:00:21 UTC: NOTICE : Processing spec file: i686/stage1.spec
08 Jul 2020 03:00:21 UTC: NOTICE : Using target: stage1
08 Jul 2020 03:00:21 UTC: NOTICE : Source file specification matching setting is: loose
08 Jul 2020 03:00:21 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
08 Jul 2020 03:00:22 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
08 Jul 2020 03:00:22 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200708T030002Z/tmp/stage1root
08 Jul 2020 03:00:22 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.72user 0.03system 0:00.81elapsed 94%CPU (0avgtext+0avgdata 16992maxresident)k
0inputs+0outputs (0major+9674minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200708T030002Z.QNjHwY/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-07-01 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-07-01 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
01 Jul 2020 03:00:30 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
01 Jul 2020 03:00:30 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'bindist', 'pkgcache', 'preserve_libs'}
01 Jul 2020 03:00:30 UTC: NOTICE : Processing spec file: i686/stage1.spec
01 Jul 2020 03:00:30 UTC: NOTICE : Using target: stage1
01 Jul 2020 03:00:30 UTC: NOTICE : Source file specification matching setting is: loose
01 Jul 2020 03:00:30 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
01 Jul 2020 03:00:30 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
01 Jul 2020 03:00:30 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200701T030002Z/tmp/stage1root
01 Jul 2020 03:00:30 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.72user 0.03system 0:00.81elapsed 94%CPU (0avgtext+0avgdata 16928maxresident)k
0inputs+0outputs (0major+9684minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200701T030002Z.7Kt945/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-06-24 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-06-24 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
24 Jun 2020 03:00:30 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
24 Jun 2020 03:00:30 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'bindist', 'preserve_libs', 'pkgcache'}
24 Jun 2020 03:00:30 UTC: NOTICE : Processing spec file: i686/stage1.spec
24 Jun 2020 03:00:30 UTC: NOTICE : Using target: stage1
24 Jun 2020 03:00:30 UTC: NOTICE : Source file specification matching setting is: loose
24 Jun 2020 03:00:30 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
24 Jun 2020 03:00:31 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
24 Jun 2020 03:00:31 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200624T030003Z/tmp/stage1root
24 Jun 2020 03:00:31 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.76user 0.00system 0:00.80elapsed 94%CPU (0avgtext+0avgdata 16856maxresident)k
0inputs+0outputs (0major+9721minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200624T030003Z.WNqpdW/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-06-17 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-06-17 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
17 Jun 2020 03:00:31 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
17 Jun 2020 03:00:31 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'pkgcache', 'bindist', 'preserve_libs'}
17 Jun 2020 03:00:31 UTC: NOTICE : Processing spec file: i686/stage1.spec
17 Jun 2020 03:00:31 UTC: NOTICE : Using target: stage1
17 Jun 2020 03:00:31 UTC: NOTICE : Source file specification matching setting is: loose
17 Jun 2020 03:00:31 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
17 Jun 2020 03:00:31 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
17 Jun 2020 03:00:31 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200617T030004Z/tmp/stage1root
17 Jun 2020 03:00:31 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.71user 0.05system 0:00.82elapsed 92%CPU (0avgtext+0avgdata 17104maxresident)k
0inputs+0outputs (0major+9683minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200617T030004Z.lwGVxd/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-06-10 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-06-10 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
10 Jun 2020 03:00:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
10 Jun 2020 03:00:32 UTC: NOTICE : conf_values[options] = {'pkgcache', 'bindist', 'clear-autoresume', 'preserve_libs'}
10 Jun 2020 03:00:32 UTC: NOTICE : Processing spec file: i686/stage1.spec
10 Jun 2020 03:00:32 UTC: NOTICE : Using target: stage1
10 Jun 2020 03:00:32 UTC: NOTICE : Source file specification matching setting is: loose
10 Jun 2020 03:00:32 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
10 Jun 2020 03:00:33 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
10 Jun 2020 03:00:33 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200610T030003Z/tmp/stage1root
10 Jun 2020 03:00:33 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.73user 0.03system 0:00.84elapsed 90%CPU (0avgtext+0avgdata 16784maxresident)k
0inputs+0outputs (0major+9697minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200610T030003Z.7SuNZV/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-06-03 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-06-03 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
03 Jun 2020 03:00:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
03 Jun 2020 03:00:26 UTC: NOTICE : conf_values[options] = {'pkgcache', 'clear-autoresume', 'bindist', 'preserve_libs'}
03 Jun 2020 03:00:26 UTC: NOTICE : Processing spec file: i686/stage1.spec
03 Jun 2020 03:00:26 UTC: NOTICE : Using target: stage1
03 Jun 2020 03:00:26 UTC: NOTICE : Source file specification matching setting is: loose
03 Jun 2020 03:00:26 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
03 Jun 2020 03:00:27 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
03 Jun 2020 03:00:27 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200603T030002Z/tmp/stage1root
03 Jun 2020 03:00:27 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.74user 0.02system 0:00.82elapsed 92%CPU (0avgtext+0avgdata 17060maxresident)k
0inputs+0outputs (0major+9693minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200603T030002Z.p8IPCt/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-05-27 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-05-27 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
27 May 2020 03:00:31 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
27 May 2020 03:00:31 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'pkgcache', 'preserve_libs', 'bindist'}
27 May 2020 03:00:31 UTC: NOTICE : Processing spec file: i686/stage1.spec
27 May 2020 03:00:31 UTC: NOTICE : Using target: stage1
27 May 2020 03:00:31 UTC: NOTICE : Source file specification matching setting is: loose
27 May 2020 03:00:31 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
27 May 2020 03:00:32 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
27 May 2020 03:00:32 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200527T030003Z/tmp/stage1root
27 May 2020 03:00:32 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.72user 0.03system 0:00.83elapsed 92%CPU (0avgtext+0avgdata 17016maxresident)k
0inputs+0outputs (0major+9694minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200527T030003Z.1PWybI/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-05-20 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-05-20 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
20 May 2020 03:00:30 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
20 May 2020 03:00:30 UTC: NOTICE : conf_values[options] = {'bindist', 'pkgcache', 'preserve_libs', 'clear-autoresume'}
20 May 2020 03:00:30 UTC: NOTICE : Processing spec file: i686/stage1.spec
20 May 2020 03:00:30 UTC: NOTICE : Using target: stage1
20 May 2020 03:00:30 UTC: NOTICE : Source file specification matching setting is: loose
20 May 2020 03:00:30 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
20 May 2020 03:00:30 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
20 May 2020 03:00:30 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200520T030003Z/tmp/stage1root
20 May 2020 03:00:30 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.73user 0.03system 0:00.84elapsed 91%CPU (0avgtext+0avgdata 16848maxresident)k
0inputs+0outputs (0major+9722minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200520T030003Z.xKpgxA/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-05-16 11:18 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-05-16 11:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f /release/tmp/run/catalyst-auto.20200516T111451Z.sWqInL/specs/i686/stage1.spec
16 May 2020 11:18:10 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
16 May 2020 11:18:10 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'seedcache', 'clear-autoresume', 'autoresume', 'pkgcache', 'snapcache', 'bindist'}
16 May 2020 11:18:10 UTC: NOTICE : Processing spec file: /release/tmp/run/catalyst-auto.20200516T111451Z.sWqInL/specs/i686/stage1.spec
16 May 2020 11:18:10 UTC: NOTICE : Using target: stage1
16 May 2020 11:18:10 UTC: NOTICE : Source file specification matching setting is: loose
16 May 2020 11:18:10 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
16 May 2020 11:18:11 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
16 May 2020 11:18:11 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/tmp/stage1root
16 May 2020 11:18:11 UTC: NOTICE : Removing AutoResume Points ...
16 May 2020 11:18:11 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20200516T111451Z
16 May 2020 11:18:11 UTC: NOTICE : --- Running action sequence: unpack
16 May 2020 11:18:11 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
16 May 2020 11:18:11 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
16 May 2020 11:18:11 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
16 May 2020 11:18:11 UTC: NOTICE : Removing AutoResume Points ...
16 May 2020 11:18:11 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20200516T111451Z
16 May 2020 11:18:11 UTC: NOTICE : Clearing the chroot path ...
16 May 2020 11:18:11 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z
16 May 2020 11:18:11 UTC: NOTICE : Starting auto from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
16 May 2020 11:18:11 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z (this may take some time) ..
16 May 2020 11:18:17 UTC: NOTICE : --- Running action sequence: unpack_snapshot
16 May 2020 11:18:17 UTC: NOTICE : --- Running action sequence: setup_confdir
16 May 2020 11:18:17 UTC: NOTICE : --- Running action sequence: portage_overlay
16 May 2020 11:18:17 UTC: NOTICE : --- Running action sequence: base_dirs
16 May 2020 11:18:17 UTC: NOTICE : --- Running action sequence: bind
16 May 2020 11:18:17 UTC: NOTICE : --- Running action sequence: chroot_setup
16 May 2020 11:18:17 UTC: NOTICE : Setting up chroot...
NOTICE:catalyst:Setting up chroot...
16 May 2020 11:18:17 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
WARNING:catalyst:Overriding certain env variables may cause catastrophic failure.
16 May 2020 11:18:17 UTC: WARNING : If your build fails look here first as the possible problem.
WARNING:catalyst:If your build fails look here first as the possible problem.
16 May 2020 11:18:17 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
WARNING:catalyst:Catalyst assumes you know what you are doing when setting these variables.
16 May 2020 11:18:17 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
WARNING:catalyst:Catalyst Maintainers use VERY minimal envscripts, if used at all.
16 May 2020 11:18:17 UTC: WARNING : You have been warned.
WARNING:catalyst:You have been warned.
16 May 2020 11:18:17 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/etc/portage/make.conf
NOTICE:catalyst:Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/etc/portage/make.conf
16 May 2020 11:18:17 UTC: NOTICE : STICKY-CONFIG is enabled
NOTICE:catalyst:STICKY-CONFIG is enabled
16 May 2020 11:18:17 UTC: NOTICE : --- Running action sequence: setup_environment
NOTICE:catalyst:--- Running action sequence: setup_environment
16 May 2020 11:18:17 UTC: NOTICE : --- Running action sequence: run_local
NOTICE:catalyst:--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage sys-apps/policycoreutils
[ebuild N ] sys-libs/libsepol-3.0
[ebuild N ] dev-libs/ustr-1.0.4-r8
[ebuild N ] sys-apps/semodule-utils-3.0
[ebuild N ] virtual/libffi-3.3_rc0
[ebuild N ] media-fonts/stix-fonts-1.1.1
[ebuild N ] media-libs/freetype-2.9.1-r3
[ebuild N ] media-libs/libpng-1.6.37
[ebuild N ] dev-lang/swig-3.0.12
[ebuild N ] sys-libs/libcap-2.26-r2
[ebuild N ] sys-libs/libcap-ng-0.7.10
[ebuild N ] dev-libs/libuv-1.35.0
[ebuild N ] sys-process/audit-2.8.4
[ebuild N ] sys-libs/libselinux-3.0
[ebuild R ] sys-apps/portage-2.3.99-r2
[ebuild N ] dev-python/functools32-3.2.3
[ebuild N ] dev-python/backports-1.0
[ebuild N ] sys-libs/libsemanage-3.0
[ebuild N ] app-arch/libarchive-3.4.2
[ebuild N ] app-crypt/rhash-1.3.6-r1
[ebuild N ] dev-libs/elfutils-0.177
[ebuild N ] virtual/libelf-3
[ebuild N ] dev-python/six-1.14.0
[ebuild N ] dev-python/ipy-1.00
[ebuild N ] dev-python/setuptools_scm-3.5.0
[ebuild N ] dev-python/cython-0.29.15
[ebuild N ] dev-python/decorator-4.4.2
[ebuild N ] dev-python/numpy-1.16.5-r1
[ebuild N ] dev-python/pytz-2019.3
[ebuild N ] dev-python/kiwisolver-1.0.1
[ebuild N ] dev-python/subprocess32-3.5.4
[ebuild N ] dev-python/pyparsing-2.4.6
[ebuild N ] dev-python/versioneer-0.18
[ebuild N ] dev-python/cycler-0.10.0
[ebuild N ] dev-python/python-dateutil-2.8.1-r1
[ebuild N ] dev-python/backports-functools-lru-cache-1.6.1
[ebuild N ] dev-libs/jsoncpp-1.9.3_pre20200412
[ebuild N ] dev-libs/glib-2.62.6
[ebuild N ] x11-misc/shared-mime-info-1.10-r1
[ebuild N ] dev-util/desktop-file-utils-0.24
[ebuild N ] dev-util/cmake-3.16.5
[ebuild N ] media-libs/qhull-2015.2
[ebuild N ] dev-python/matplotlib-2.2.2-r1
[ebuild N ] dev-python/networkx-2.4
[ebuild N ] app-admin/setools-4.2.2
[ebuild N ] sys-apps/selinux-python-3.0
[ebuild N ] sys-apps/policycoreutils-3.0
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by sys-apps/policycoreutils-3.0::gentoo
# required by sys-apps/policycoreutils (argument)
>=sys-libs/libselinux-3.0 python
# required by sys-apps/selinux-python-3.0::gentoo
# required by sys-apps/policycoreutils-3.0::gentoo
# required by sys-apps/policycoreutils (argument)
>=sys-libs/libsemanage-3.0 python
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
16 May 2020 11:18:26 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
ERROR:catalyst:CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/tmp/portage is not a mount point. Skipping
16 May 2020 11:18:26 UTC: ERROR : CatalystError: Stage build aborting due to error.
ERROR:catalyst:CatalystError: Stage build aborting due to error.
16 May 2020 11:18:26 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
ERROR:catalyst:Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1366, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1375, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
16 May 2020 11:18:26 UTC: NOTICE : Cleaning up... Running unbind()
NOTICE:catalyst:Cleaning up... Running unbind()
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/cache/binpkgs is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/cache/binpkgs is not a mount point. Skipping
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/tmp/stage1root/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/tmp/stage1root/proc is not a mount point. Skipping
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/run is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/run is not a mount point. Skipping
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/dev/shm does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/dev/shm does not exist. Skipping
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/dev/pts does not exist. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/dev/pts does not exist. Skipping
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/tmp/portage is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/tmp/portage is not a mount point. Skipping
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/cache/distfiles is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/cache/distfiles is not a mount point. Skipping
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/db/repos/gentoo is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/var/db/repos/gentoo is not a mount point. Skipping
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/dev is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/dev is not a mount point. Skipping
16 May 2020 11:18:26 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/proc is not a mount point. Skipping
NOTICE:catalyst:/release/buildroot/x86-dev/tmp/default/stage1-i686-20200516T111451Z/proc is not a mount point. Skipping
Command exited with non-zero status 2
30.61user 5.84system 0:15.77elapsed 231%CPU (0avgtext+0avgdata 354628maxresident)k
80inputs+2466136outputs (0major+166904minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20200516T111451Z.sWqInL/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-05-13 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-05-13 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
13 May 2020 03:00:36 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
13 May 2020 03:00:36 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'clear-autoresume', 'bindist', 'pkgcache'}
13 May 2020 03:00:36 UTC: NOTICE : Processing spec file: i686/stage1.spec
13 May 2020 03:00:36 UTC: NOTICE : Using target: stage1
13 May 2020 03:00:36 UTC: NOTICE : Source file specification matching setting is: loose
13 May 2020 03:00:36 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
13 May 2020 03:00:39 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
13 May 2020 03:00:39 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200513T030003Z/tmp/stage1root
13 May 2020 03:00:39 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.86user 0.15system 0:03.60elapsed 28%CPU (0avgtext+0avgdata 16960maxresident)k
449768inputs+0outputs (0major+9698minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200513T030003Z.sOe0Ik/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-05-06 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-05-06 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
06 May 2020 03:00:55 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
06 May 2020 03:00:55 UTC: NOTICE : conf_values[options] = {'bindist', 'clear-autoresume', 'preserve_libs', 'pkgcache'}
06 May 2020 03:00:55 UTC: NOTICE : Processing spec file: i686/stage1.spec
06 May 2020 03:00:55 UTC: NOTICE : Using target: stage1
06 May 2020 03:00:55 UTC: NOTICE : Source file specification matching setting is: loose
06 May 2020 03:00:55 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
06 May 2020 03:00:58 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
06 May 2020 03:00:58 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200506T030003Z/tmp/stage1root
06 May 2020 03:00:58 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.86user 0.05system 0:03.44elapsed 26%CPU (0avgtext+0avgdata 18056maxresident)k
449776inputs+0outputs (0major+10391minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200506T030003Z.EELbor/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-04-29 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-04-29 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
29 Apr 2020 03:00:46 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
29 Apr 2020 03:00:46 UTC: NOTICE : conf_values[options] = {'pkgcache', 'preserve_libs', 'clear-autoresume', 'bindist'}
29 Apr 2020 03:00:46 UTC: NOTICE : Processing spec file: i686/stage1.spec
29 Apr 2020 03:00:46 UTC: NOTICE : Using target: stage1
29 Apr 2020 03:00:46 UTC: NOTICE : Source file specification matching setting is: loose
29 Apr 2020 03:00:46 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
29 Apr 2020 03:00:49 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
29 Apr 2020 03:00:49 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200429T030004Z/tmp/stage1root
29 Apr 2020 03:00:49 UTC: ERROR : CatalystError: Cannot locate specified distdir: /usr/portage/distfiles
Command exited with non-zero status 2
0.79user 0.12system 0:03.03elapsed 30%CPU (0avgtext+0avgdata 18440maxresident)k
449776inputs+0outputs (0major+10388minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20200429T030004Z.w69XMc/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2020-01-08 4:04 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2020-01-08 4:04 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
08 Jan 2020 04:04:05 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
08 Jan 2020 04:04:05 UTC: NOTICE : conf_values[options] = {'pkgcache', 'clear-autoresume', 'preserve_libs', 'bindist'}
08 Jan 2020 04:04:05 UTC: NOTICE : Processing spec file: i686/stage1.spec
08 Jan 2020 04:04:05 UTC: NOTICE : Using target: stage1
08 Jan 2020 04:04:05 UTC: NOTICE : Source file specification matching setting is: loose
08 Jan 2020 04:04:05 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
08 Jan 2020 04:04:08 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
08 Jan 2020 04:04:08 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200108T030003Z/tmp/stage1root
08 Jan 2020 04:04:08 UTC: NOTICE : --- Running action sequence: unpack
08 Jan 2020 04:04:08 UTC: NOTICE : Clearing the chroot path ...
08 Jan 2020 04:04:08 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200108T030003Z
08 Jan 2020 04:04:08 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
08 Jan 2020 04:04:08 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200108T030003Z (this may take some time) ..
tar: ./var/db/pkg/dev-util/intltool-0.51.0-r2/LDFLAGS: Cannot write: No space left on device
tar: ./var/db/pkg/dev-util/intltool-0.51.0-r2/environment.bz2: Cannot write: No space left on device
tar: ./var/db/pkg/dev-util/intltool-0.51.0-r2/HOMEPAGE: Cannot write: No space left on device
tar: ./var/db/pkg/dev-util/intltool-0.51.0-r2/IUSE_EFFECTIVE: Cannot write: No space left on device
tar: ./var/db/pkg/dev-util/intltool-0.51.0-r2/intltool-0.51.0-r2.ebuild: Cannot write: No space left on device
tar: ./var/db/pkg/dev-util/intltool-0.51.0-r2/LICENSE: Cannot write: No space left on device
tar: ./var/db/pkg/dev-util/intltool-0.51.0-r2/CONTENTS: Cannot write: No space left on device
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1: Cannot mkdir: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/PF: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/SIZE: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/CBUILD: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/CXXFLAGS: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/USE: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/INHERITED: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/CFLAGS: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/NEEDED: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/BINPKGMD5: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space left on device
tar: ./var/db/pkg/sys-process/procps-3.3.15-r1/SLOT: Cannot open: No such file or directory
tar: ./var/db/pkg/sys-process: Cannot mkdir: No space l--- Logging error ---
Traceback (most recent call last):
File "/usr/lib64/python3.6/logging/__init__.py", line 998, in emit
self.flush()
File "/usr/lib64/python3.6/logging/__init__.py", line 978, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "/usr/lib/python-exec/python3.6/catalyst", line 37, in <module>
main(sys.argv[1:])
File "/usr/lib64/python3.6/site-packages/catalyst/main.py", line 285, in main
return _main(parser, opts)
File "/usr/lib64/python3.6/site-packages/catalyst/main.py", line 452, in _main
success = build_target(addlargs)
File "/usr/lib64/python3.6/site-packages/catalyst/main.py", line 114, in build_target
return target.run()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 824, in unpack
log.error('%s', error_msg % unpack_info)
File "/usr/lib64/python3.6/logging/__init__.py", line 1337, in error
self._log(ERROR, msg, args, **kwargs)
File "/usr/lib64/python3.6/site-packages/catalyst/log.py", line 29, in _log
super(CatalystLogger, self)._log(level, line, (), **kwargs)
Message: "'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20200108T030003Z failed."
Arguments: ()
--- Logging error ---
OSError: [Errno 28] No space left on device
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1465, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 828, in unpack
data = self.settings["source_path_hash"])
File "/usr/lib64/python3.6/site-packages/catalyst/base/resume.py", line 56, in enable
myf.write(data)
OSError: [Errno 28] No space left on device
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/logging/__init__.py", line 998, in emit
self.flush()
File "/usr/lib64/python3.6/logging/__init__.py", line 978, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "/usr/lib/python-exec/python3.6/catalyst", line 37, in <module>
main(sys.argv[1:])
File "/usr/lib64/python3.6/site-packages/catalyst/main.py", line 285, in main
return _main(parser, opts)
File "/usr/lib64/python3.6/site-packages/catalyst/main.py", line 452, in _main
success = build_target(addlargs)
File "/usr/lib64/python3.6/site-packages/catalyst/main.py", line 114, in build_target
return target.run()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
log.error('Exception running action sequence %s', x, exc_info=True)
File "/usr/lib64/python3.6/logging/__init__.py", line 1337, in error
self._log(ERROR, msg, args, **kwargs)
File "/usr/lib64/python3.6/site-packages/catalyst/log.py", line 29, in _log
super(CatalystLogger, self)._log(level, line, (), **kwargs)
Message: 'Exception running action sequence unpack'
Arguments: ()
--- Logging error ---
Traceback (most recent call last):
File "/usr/lib64/python3.6/logging/__init__.py", line 998, in emit
self.flush()
File "/usr/lib64/python3.6/logging/__init__.py", line 978, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "/usr/lib/python-exec/python3.6/catalyst", line 37, in <module>
main(sys.argv[1:])
File "/usr/lib64/python3.6/site-packages/catalyst/main.py", line 285, in main
return _main(parser, opts)
File "/usr/lib64/python3.6/site-packages/catalyst/main.py", line 452, in _main
success = build_target(addlargs)
File "/usr/lib64/python3.6/site-packages/catalyst/main.py", line 114, in build_target
return target.run()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1476, in run
log.n
Full build log at /home/release/tmp/run/catalyst-auto.20200108T030003Z.PKBNqu/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2019-12-10 21:48 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2019-12-10 21:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
10 Dec 2019 21:48:23 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
10 Dec 2019 21:48:23 UTC: NOTICE : conf_values[options] = {'pkgcache', 'preserve_libs', 'bindist', 'seedcache', 'clear-autoresume', 'snapcache', 'autoresume'}
10 Dec 2019 21:48:23 UTC: NOTICE : Processing spec file: i686/stage1.spec
10 Dec 2019 21:48:23 UTC: NOTICE : Using target: stage1
10 Dec 2019 21:48:23 UTC: NOTICE : Source file specification matching setting is: loose
10 Dec 2019 21:48:23 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
10 Dec 2019 21:48:24 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
10 Dec 2019 21:48:24 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/tmp/stage1root
10 Dec 2019 21:48:24 UTC: NOTICE : Removing AutoResume Points ...
10 Dec 2019 21:48:24 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20191210T214503Z
10 Dec 2019 21:48:24 UTC: NOTICE : --- Running action sequence: unpack
10 Dec 2019 21:48:24 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
10 Dec 2019 21:48:24 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1471, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 748, in unpack
unpack_info['source'] = file_check(unpack_info['source'])
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 75, in file_check
for ext in extensions:
TypeError: 'NoneType' object is not iterable
10 Dec 2019 21:48:24 UTC: NOTICE : Cleaning up... Running unbind()
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/var/cache/binpkgs does not exist. Skipping
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/tmp/stage1root/proc is not a mount point. Skipping
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/run does not exist. Skipping
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/dev/shm does not exist. Skipping
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/dev/pts does not exist. Skipping
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/var/tmp/portage does not exist. Skipping
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/var/cache/distfiles does not exist. Skipping
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/var/db/repos/gentoo does not exist. Skipping
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/dev does not exist. Skipping
10 Dec 2019 21:48:24 UTC: NOTICE : /release/buildroot/x86-dev/tmp/default/stage1-i686-20191210T214503Z/proc does not exist. Skipping
Command exited with non-zero status 2
0.41user 0.09system 0:00.53elapsed 93%CPU (0avgtext+0avgdata 18316maxresident)k
0inputs+0outputs (0major+12003minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20191210T214503Z.uEFXsk/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2019-09-04 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2019-09-04 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
04 Sep 2019 03:00:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
04 Sep 2019 03:00:26 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'preserve_libs', 'pkgcache', 'bindist'}
04 Sep 2019 03:00:26 UTC: NOTICE : Processing spec file: i686/stage1.spec
04 Sep 2019 03:00:26 UTC: NOTICE : Using target: stage1
04 Sep 2019 03:00:26 UTC: NOTICE : Source file specification matching setting is: loose
04 Sep 2019 03:00:26 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
04 Sep 2019 03:00:27 UTC: ERROR : CatalystError: File Not Found: /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest
Command exited with non-zero status 2
0.20user 0.03system 0:00.30elapsed 81%CPU (0avgtext+0avgdata 18200maxresident)k
0inputs+0outputs (0major+9054minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20190904T030003Z.3MNbAZ/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2019-02-14 16:06 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2019-02-14 16:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
14 Feb 2019 16:06:39 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
14 Feb 2019 16:06:39 UTC: NOTICE : conf_values[options] = {'snapcache', 'preserve_libs', 'autoresume', 'pkgcache', 'bindist', 'seedcache', 'clear-autoresume'}
14 Feb 2019 16:06:39 UTC: NOTICE : Processing spec file: i686/stage1.spec
14 Feb 2019 16:06:39 UTC: NOTICE : Using target: stage1
14 Feb 2019 16:06:39 UTC: NOTICE : Source file specification matching setting is: loose
14 Feb 2019 16:06:39 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
14 Feb 2019 16:06:39 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
14 Feb 2019 16:06:39 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20190214T160244Z/tmp/stage1root
14 Feb 2019 16:06:39 UTC: NOTICE : Removing AutoResume Points ...
14 Feb 2019 16:06:39 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20190214T160244Z
14 Feb 2019 16:06:39 UTC: NOTICE : --- Running action sequence: unpack
14 Feb 2019 16:06:39 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
14 Feb 2019 16:06:39 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 742, in unpack
unpack_info['source'] = file_check(unpack_info['source'])
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 75, in file_check
for ext in extensions:
TypeError: 'NoneType' object is not iterable
14 Feb 2019 16:06:39 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
0.41user 0.07system 0:00.52elapsed 94%CPU (0avgtext+0avgdata 18392maxresident)k
0inputs+0outputs (0major+11588minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20190214T160244Z.0NxkCX/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2019-01-09 6:43 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2019-01-09 6:43 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking for i686-pc-linux-gnu-cf77... no
checking for i686-pc-linux-gnu-fort77... no
checking for i686-pc-linux-gnu-fl32... no
checking for i686-pc-linux-gnu-af77... no
checking for i686-pc-linux-gnu-g77... no
checking for i686-pc-linux-gnu-gfortran... i686-pc-linux-gnu-gfortran
checking whether the Fortran 77 compiler works... yes
checking for Fortran 77 compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether i686-pc-linux-gnu-gfortran accepts -g... yes
configure: will now look for GNU compilers
configure: i686-pc-linux-gnu-gcc is already a GNU C compiler
configure: i686-pc-linux-gnu-c++ is already a GNU C++ compiler
configure: i686-pc-linux-gnu-gfortran is already a GNU Fortran compiler
configure: i686-pc-linux-gnu-gfortran is already a GNU Fortran 77 compiler
checking for i686-pc-linux-gnu-gcj... no
checking for gcj... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pre-inst-env
make[1]: Entering directory '/var/tmp/portage/sys-devel/automake-1.16.1-r1/work/automake-1.16.1'
make[1]: Leaving directory '/var/tmp/portage/sys-devel/automake-1.16.1-r1/work/automake-1.16.1'
rm -f lib/Automake/Config.pm lib/Automake/Config.pm-t
/bin/mkdir -p lib/Automake
in=Config.in \
&& ( sed -e "s,[@]configure_input[@],Generated from $in; do not edit by hand.,g" -e 's,[@]datadir[@],/usr/share,g' -e 's,[@]amdir[@],/usr/share/automake-1.16/am,g' -e 's,[@]bindir[@],/usr/bin,g' -e 's,[@]docdir[@],/usr/share/doc/automake-1.16.1-r1,g' -e 's,[@]pkgvdatadir[@],/usr/share/automake-1.16,g' -e 's,[@]scriptdir[@],/usr/share/automake-1.16,g' -e 's,[@]automake_acdir[@],/usr/share/aclocal-1.16,g' -e 's,[@]system_acdir[@],/usr/share/aclocal,g' -e 's,[@]am__isrc[@],!!@!!am__isrc!!@!!,g' | /bin/sh ./config.status --file=- | sed -e 's,!!@!!am__isrc!!@!!,@''am__isrc@,g' ) <./lib/Automake/Config.in >lib/Automake/Config.pm-t
if LC_ALL=C grep '@[a-zA-Z0-9_][a-zA-Z0-9_]*@' lib/Automake/Config.pm-t; then echo "lib/Automake/Config.pm contains unexpanded substitution (see lines above)"; exit 1; fi; chmod a-w lib/Automake/Config.pm-t && mv -f lib/Automake/Config.pm-t lib/Automake/Config.pm
rm -f t/ax/test-defs.sh t/ax/test-defs.sh-t
/bin/mkdir -p t/ax
in=t/ax/test-defs.in \
&& ( sed -e "s,[@]configure_input[@],Generated from $in; do not edit by hand.,g" -e 's,[@]datadir[@],/usr/share,g' -e 's,[@]amdir[@],/usr/share/automake-1.16/am,g' -e 's,[@]bindir[@],/usr/bin,g' -e 's,[@]docdir[@],/usr/share/doc/automake-1.16.1-r1,g' -e 's,[@]pkgvdatadir[@],/usr/share/automake-1.16,g' -e 's,[@]scriptdir[@],/usr/share/automake-1.16,g' -e 's,[@]automake_acdir[@],/usr/share/aclocal-1.16,g' -e 's,[@]system_acdir[@],/usr/share/aclocal,g' -e 's,[@]am__isrc[@],!!@!!am__isrc!!@!!,g' | /bin/sh ./config.status --file=- | sed -e 's,!!@!!am__isrc!!@!!,@''am__isrc@,g' ) <./$in >t/ax/test-defs.sh-t
if LC_ALL=C grep '@[a-zA-Z0-9_][a-zA-Z0-9_]*@' t/ax/test-defs.sh-t; then echo "t/ax/test-defs.sh contains unexpanded substitution (see lines above)"; exit 1; fi; chmod a-w t/ax/test-defs.sh-t && mv -f t/ax/test-defs.sh-t t/ax/test-defs.sh
: \
&& /bin/mkdir -p doc \
&& f=`echo doc/automake.1 | sed 's|.*/||; s|\.1$||; s,x,x,'` \
&& echo ".so man1/$f-1.16.1" > doc/automake.1
: \
&& /bin/mkdir -p doc \
&& f=`echo doc/aclocal.1 | sed 's|.*/||; s|\.1$||; s,x,x,'` \
&& echo ".so man1/$f-1.16.1" > doc/aclocal.1
rm -f runtest runtest-t
in=t/ax/runtest.in \
&& /bin/mkdir -p t/ax \
&& ( sed -e "s,[@]configure_input[@],Generated from $in; do not edit by hand.,g" -e 's,[@]datadir[@],/usr/share,g' -e 's,[@]amdir[@],/usr/share/automake-1.16/am,g' -e 's,[@]bindir[@],/usr/bin,g' -e 's,[@]docdir[@],/usr/share/doc/automake-1.16.1-r1,g' -e 's,[@]pkgvdatadir[@],/usr/share/automake-1.16,g' -e 's,[@]scriptdir[@],/usr/share/automake-1.16,g' -e 's,[@]automake_acdir[@],/usr/share/aclocal-1.16,g' -e 's,[@]system_acdir[@],/usr/share/aclocal,g' -e 's,[@]am__isrc[@],!!@!!am__isrc!!@!!,g' | /bin/sh ./config.status --file=- | sed -e 's,!!@!!am__isrc!!@!!,@''am__isrc@,g' ) <./$in >runtest-t \
&& chmod a+x runtest-t
if LC_ALL=C grep '@[a-zA-Z0-9_][a-zA-Z0-9_]*@' runtest-t; then echo "runtest contains unexpanded substitution (see lines above)"; exit 1; fi; chmod a-w runtest-t && mv -f runtest-t runtest
rm -f t/ax/cc-no-c-o t/ax/cc-no-c-o-t
in=t/ax/cc-no-c-o.in \
&& /bin/mkdir -p t/ax \
&& ( sed -e "s,[@]configure_input[@],Generated from $in; do not edit by hand.,g" -e 's,[@]datadir[@],/usr/share,g' -e 's,[@]amdir[@],/usr/share/automake-1.16/am,g' -e 's,[@]bindir[@],/usr/bin,g' -e 's,[@]docdir[@],/usr/share/doc/automake-1.16.1-r1,g' -e 's,[@]pkgvdatadir[@],/usr/share/automake-1.16,g' -e 's,[@]scriptdir[@],/usr/share/automake-1.16,g' -e 's,[@]automake_acdir[@],/usr/share/aclocal-1.16,g' -e 's,[@]system_acdir[@],/usr/share/aclocal,g' -e 's,[@]am__isrc[@],!!@!!am__isrc!!@!!,g' | /bin/sh ./config.status --file=- | sed -e 's,!!@!!am__isrc!!@!!,@''am__isrc@,g' ) <./$in >t/ax/cc-no-c-o-t \
&& chmod a+x t/ax/cc-no-c-o-t
if LC_ALL=C grep '@[a-zA-Z0-9_][a-zA-Z0-9_]*@' t/ax/cc-no-c-o-t; then echo "t/ax/cc-no-c-o contains unexpanded substitution (see lines above)"; exit 1; fi; chmod a-w t/ax/cc-no-c-o-t && mv -f t/ax/cc-no-c-o-t t/ax/cc-no-c-o
rm -f t/ax/shell-no-trail-bslash t/ax/shell-no-trail-bslash-t
in=t/ax/shell-no-trail-bslash.in \
&& /bin/mkdir -p t/ax \
&& ( sed -e "s,[@]configure_input[@],Generated from $in; do not edit by hand.,g" -e 's,[@]datadir[@],/usr/share,g' -e 's,[@]amdir[@],/usr/share/automake-1.16/am,g' -e 's,[@]bindir[@],/usr/bin,g' -e 's,[@]docdir[@],/usr/share/doc/automake-1.16.1-r1,g' -e 's,[@]pkgvdatadir[@],/usr/share/automake-1.16,g' -e 's,[@]scriptdir[@],/usr/share/automake-1.16,g' -e 's,[@]automake_acdir[@],/usr/share/aclocal-1.16,g' -e 's,[@]system_acdir[@],/usr/share/aclocal,g' -e 's,[@]am__isrc[@],!!@!!am__isrc!!@!!,g' | /bin/sh ./config.status --file=- | sed -e 's,!!@!!am__isrc!!@!!,@''am__isrc@,g' ) <./$in >t/ax/shell-no-trail-bslash-t \
&& chmod a+x t/ax/shell-no-trail-bslash-t
if LC_ALL=C grep '@[a-zA-Z0-9_][a-zA-Z0-9_]*@' t/ax/shell-no-trail-bslash-t; then echo "t/ax/shell-no-trail-bslash contains unexpanded substitution (see lines above)"; exit 1; fi; chmod a-w t/ax/shell-no-trail-bslash-t && mv -f t/ax/shell-no-trail-bslash-t t/ax/shell-no-trail-bslash
rm -f bin/aclocal bin/aclocal-t bin/aclocal-t2 \
&& /bin/mkdir -p bin \
&& in=bin/aclocal.in && ( sed -e "s,[@]configure_input[@],Generated from $in; do not edit by hand.,g" -e 's,[@]datadir[@],/usr/share,g' -e 's,[@]amdir[@],/usr/share/automake-1.16/am,g' -e 's,[@]bindir[@],/usr/bin,g' -e 's,[@]docdir[@],/usr/share/doc/automake-1.16.1-r1,g' -e 's,[@]pkgvdatadir[@],/usr/share/automake-1.16,g' -e 's,[@]scriptdir[@],/usr/share/automake-1.16,g' -e 's,[@]automake_acdir[@],/usr/share/aclocal-1.16,g' -e 's,[@]system_acdir[@],/usr/share/aclocal,g' -e 's,[@]am__isrc[@],!!@!!am__isrc!!@!!,g' | /bin/sh ./config.status --file=- | sed -e 's,!!@!!am__isrc!!@!!,@''am__isrc@,g' ) <./$in >bin/aclocal-t \
&& chmod a+x,a-w bin/aclocal-t && mv -f bin/aclocal-t bin/aclocal
rm -f bin/automake bin/automake-t bin/automake-t2 \
&& /bin/mkdir -p bin \
&& in=bin/automake.in && ( sed -e "s,[@]configure_input[@],Generated from $in; do not edit by hand.,g" -e 's,[@]datadir[@],/usr/share,g' -e 's,[@]amdir[@],/usr/share/automake-1.16/am,g' -e 's,[@]bindir[@],/usr/bin,g' -e 's,[@]docdir[@],/usr/share/doc/automake-1.16.1-r1,g' -e 's,[@]pkgvdatadir[@],/usr/share/automake-1.16,g' -e 's,[@]scriptdir[@],/usr/share/automake-1.16,g' -e 's,[@]automake_acdir[@],/usr/share/aclocal-1.16,g' -e 's,[@]system_acdir[@],/usr/share/aclocal,g' -e 's,[@]am__isrc[@],!!@!!am__isrc!!@!!,g' | /bin/sh ./config.status --file=- | sed -e 's,!!@!!am__isrc!!@!!,@''am__isrc@,g' ) <./$in >bin/automake-t \
&& chmod a+x,a-w bin/automake-t && mv -f bin/automake-t bin/automake
: && /bin/mkdir -p doc && ./pre-inst-env /usr/bin/perl ./doc/help2man --output=doc/aclocal-1.16.1 aclocal-1.16
help2man: can't get `--help' info from aclocal-1.16
Try `--no-discard-stderr' if option outputs to stderr
make: *** [Makefile:3693: doc/aclocal-1.16.1] Error 127
* ERROR: sys-devel/automake-1.16.1-r1::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/automake-1.16.1-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/automake-1.16.1-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/automake-1.16.1-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/automake-1.16.1-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/automake-1.16.1-r1/work/automake-1.16.1'
* S: '/var/tmp/portage/sys-devel/automake-1.16.1-r1/work/automake-1.16.1'
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/glibc-2.27-r6:
* Applying Gentoo Glibc Patchset 2.27-3
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/baselayout-2.6-r1:
* You should reboot now to get /run mounted with tmpfs!
* Please run env-update then log out and back in to
* update your path.
* Messages for package sys-apps/busybox-1.29.3:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.29.3 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.29.3 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/timezone-data-2018i:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/sysvinit-2.91-r1:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-7.3.0-r3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-libs/pam-1.3.0-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.33-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-apps/openrc-0.38.3-r1:
* Auto-adding 'cgroups' service to your sysinit runlevel
* Messages for package sys-devel/automake-1.16.1-r1:
* ERROR: sys-devel/automake-1.16.1-r1::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/automake-1.16.1-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/automake-1.16.1-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/automake-1.16.1-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/automake-1.16.1-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/automake-1.16.1-r1/work/automake-1.16.1'
* S: '/var/tmp/portage/sys-devel/automake-1.16.1-r1/work/automake-1.16.1'
!!! existing preserved libs found
09 Jan 2019 06:43:11 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
09 Jan 2019 06:43:12 UTC: ERROR : CatalystError: Stage build aborting due to error.
09 Jan 2019 06:43:12 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1355, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1455, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1364, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
09 Jan 2019 06:43:12 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
8044.63user 625.57system 1:05:08elapsed 221%CPU (0avgtext+0avgdata 455272maxresident)k
32inputs+21354920outputs (4major+481309437minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20190109T030004Z.ExUgzu/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2019-01-03 13:28 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2019-01-03 13:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
03 Jan 2019 13:28:01 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
03 Jan 2019 13:28:01 UTC: NOTICE : conf_values[options] = {'snapcache', 'pkgcache', 'preserve_libs', 'bindist', 'seedcache', 'clear-autoresume', 'autoresume'}
03 Jan 2019 13:28:01 UTC: NOTICE : Processing spec file: i686/stage1.spec
03 Jan 2019 13:28:01 UTC: NOTICE : Using target: stage1
03 Jan 2019 13:28:02 UTC: NOTICE : Source file specification matching setting is: loose
03 Jan 2019 13:28:02 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
03 Jan 2019 13:28:03 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
03 Jan 2019 13:28:03 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T132725Z/tmp/stage1root
03 Jan 2019 13:28:03 UTC: NOTICE : Removing AutoResume Points ...
03 Jan 2019 13:28:03 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20190103T132725Z
03 Jan 2019 13:28:03 UTC: NOTICE : --- Running action sequence: unpack
03 Jan 2019 13:28:03 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
03 Jan 2019 13:28:03 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
03 Jan 2019 13:28:03 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
03 Jan 2019 13:28:03 UTC: NOTICE : Removing AutoResume Points ...
03 Jan 2019 13:28:03 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20190103T132725Z
03 Jan 2019 13:28:03 UTC: NOTICE : Clearing the chroot path ...
03 Jan 2019 13:28:03 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T132725Z
03 Jan 2019 13:28:03 UTC: NOTICE : Starting auto from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
03 Jan 2019 13:28:03 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T132725Z (this may take some time) ..
lbzip2: stdin: not a valid bzip2 file
tar: Child returned status 1
tar: Error is not recoverable: exiting now
03 Jan 2019 13:28:03 UTC: ERROR : 'lbzip2' extraction of /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2 to /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T132725Z failed.
03 Jan 2019 13:28:03 UTC: NOTICE : --- Running action sequence: unpack_snapshot
03 Jan 2019 13:28:03 UTC: NOTICE : --- Running action sequence: setup_confdir
03 Jan 2019 13:28:03 UTC: NOTICE : --- Running action sequence: portage_overlay
03 Jan 2019 13:28:03 UTC: NOTICE : --- Running action sequence: base_dirs
03 Jan 2019 13:28:03 UTC: NOTICE : --- Running action sequence: bind
03 Jan 2019 13:28:03 UTC: NOTICE : --- Running action sequence: chroot_setup
03 Jan 2019 13:28:03 UTC: NOTICE : Setting up chroot...
03 Jan 2019 13:28:03 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
03 Jan 2019 13:28:03 UTC: WARNING : If your build fails look here first as the possible problem.
03 Jan 2019 13:28:03 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
03 Jan 2019 13:28:03 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
03 Jan 2019 13:28:03 UTC: WARNING : You have been warned.
03 Jan 2019 13:28:03 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T132725Z/etc/portage/make.conf
03 Jan 2019 13:28:03 UTC: NOTICE : STICKY-CONFIG is enabled
03 Jan 2019 13:28:03 UTC: NOTICE : --- Running action sequence: setup_environment
03 Jan 2019 13:28:03 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T132725Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T132725Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T132725Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T132725Z /tmp/stage1-chroot.sh
chroot: failed to run command './tmp/stage1-chroot.sh': No such file or directory
03 Jan 2019 13:28:03 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
03 Jan 2019 13:28:03 UTC: ERROR : CatalystError: Stage build aborting due to error.
03 Jan 2019 13:28:03 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1355, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1364, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
03 Jan 2019 13:28:03 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
1.16user 0.28system 0:02.14elapsed 67%CPU (0avgtext+0avgdata 18508maxresident)k
372656inputs+120outputs (0major+27688minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20190103T132725Z.6ItE9k/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2019-01-03 13:17 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2019-01-03 13:17 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
03 Jan 2019 13:17:46 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
03 Jan 2019 13:17:46 UTC: NOTICE : conf_values[options] = {'seedcache', 'preserve_libs', 'pkgcache', 'snapcache', 'clear-autoresume', 'bindist', 'autoresume'}
03 Jan 2019 13:17:46 UTC: NOTICE : Processing spec file: i686/stage1.spec
03 Jan 2019 13:17:46 UTC: NOTICE : Using target: stage1
03 Jan 2019 13:17:46 UTC: NOTICE : Source file specification matching setting is: loose
03 Jan 2019 13:17:46 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
03 Jan 2019 13:17:46 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
03 Jan 2019 13:17:46 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20190103T131329Z/tmp/stage1root
03 Jan 2019 13:17:46 UTC: NOTICE : Removing AutoResume Points ...
03 Jan 2019 13:17:46 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20190103T131329Z
03 Jan 2019 13:17:46 UTC: NOTICE : --- Running action sequence: unpack
03 Jan 2019 13:17:46 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
03 Jan 2019 13:17:46 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 742, in unpack
unpack_info['source'] = file_check(unpack_info['source'])
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 75, in file_check
for ext in extensions:
TypeError: 'NoneType' object is not iterable
03 Jan 2019 13:17:46 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
0.42user 0.07system 0:00.53elapsed 93%CPU (0avgtext+0avgdata 18644maxresident)k
0inputs+0outputs (0major+11636minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20190103T131329Z.34BeVV/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2019-01-02 21:48 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2019-01-02 21:48 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
02 Jan 2019 21:48:33 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
02 Jan 2019 21:48:33 UTC: NOTICE : conf_values[options] = {'pkgcache', 'bindist', 'seedcache', 'snapcache', 'autoresume', 'preserve_libs', 'clear-autoresume'}
02 Jan 2019 21:48:33 UTC: NOTICE : Processing spec file: i686/stage1.spec
02 Jan 2019 21:48:33 UTC: NOTICE : Using target: stage1
02 Jan 2019 21:48:33 UTC: NOTICE : Source file specification matching setting is: loose
02 Jan 2019 21:48:33 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
02 Jan 2019 21:48:33 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
02 Jan 2019 21:48:33 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20190102T214502Z/tmp/stage1root
02 Jan 2019 21:48:33 UTC: NOTICE : Removing AutoResume Points ...
02 Jan 2019 21:48:33 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20190102T214502Z
02 Jan 2019 21:48:33 UTC: NOTICE : --- Running action sequence: unpack
02 Jan 2019 21:48:33 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
02 Jan 2019 21:48:33 UTC: ERROR : Exception running action sequence unpack
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 742, in unpack
unpack_info['source'] = file_check(unpack_info['source'])
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 75, in file_check
for ext in extensions:
TypeError: 'NoneType' object is not iterable
02 Jan 2019 21:48:33 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
0.42user 0.07system 0:00.52elapsed 94%CPU (0avgtext+0avgdata 18548maxresident)k
0inputs+8outputs (0major+11615minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20190102T214502Z.aiNEtj/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2019-01-02 18:44 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2019-01-02 18:44 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
- sys-devel/binutils-2.29.1-r1::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) dev-lang/python-exec-2.4.6::gentoo
>>> Installing (1 of 3) dev-lang/python-exec-2.4.6::gentoo
>>> Emerging (2 of 3) dev-lang/python-3.6.5::gentoo
>>> Installing (2 of 3) dev-lang/python-3.6.5::gentoo
>>> Emerging (3 of 3) sys-apps/portage-2.3.51-r1::gentoo
>>> Installing (3 of 3) sys-apps/portage-2.3.51-r1::gentoo
* Messages for package dev-lang/python-3.6.5:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
The following packages are causing rebuilds:
(net-libs/libnsl-1.2.0:0/2::gentoo, ebuild scheduled for merge) causes rebuilds for:
(app-text/opensp-1.5.2-r3:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.6.5:3.6/3.6m::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.8:2/2::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.15:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.33-r1:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre2-10.30:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.6.5:3.6/3.6m::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.27-r6
* Checking general environment sanity.
* Checking gcc for __thread support ...
[ ok ]
* Checking running kernel version (4.14.34-gentoo-infra38 >= 3.2.0) ...
[ ok ]
* Checking linux-headers version (4.4.0 >= 3.2.0) ...
[ ok ]
>>> Running pre-merge checks for sys-devel/gcc-7.3.0-r3
>>> Running pre-merge checks for sys-libs/pam-1.3.0-r2
>>> Running pre-merge checks for sys-fs/eudev-3.2.5
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
>>> Running pre-merge checks for net-misc/openssh-7.7_p1-r9
>>> Emerging (1 of 110) sys-kernel/linux-headers-4.14-r1::gentoo
>>> Installing (1 of 110) sys-kernel/linux-headers-4.14-r1::gentoo
>>> Emerging (2 of 110) sys-libs/glibc-2.27-r6::gentoo
>>> Installing (2 of 110) sys-libs/glibc-2.27-r6::gentoo
>>> Emerging (3 of 110) sys-libs/ncurses-6.1-r2::gentoo
>>> Installing (3 of 110) sys-libs/ncurses-6.1-r2::gentoo
>>> Emerging (4 of 110) app-arch/bzip2-1.0.6-r10::gentoo
>>> Installing (4 of 110) app-arch/bzip2-1.0.6-r10::gentoo
>>> Emerging (5 of 110) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (5 of 110) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging (6 of 110) app-arch/gzip-1.9::gentoo
>>> Installing (6 of 110) app-arch/gzip-1.9::gentoo
>>> Emerging (7 of 110) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (7 of 110) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (8 of 110) sys-libs/libseccomp-2.3.3::gentoo
>>> Installing (8 of 110) sys-libs/libseccomp-2.3.3::gentoo
>>> Emerging (9 of 110) sys-apps/busybox-1.29.3::gentoo
>>> Emerging (10 of 110) sys-apps/baselayout-2.6-r1::gentoo
>>> Emerging (11 of 110) app-text/sgml-common-0.6.3-r6::gentoo
>>> Installing (11 of 110) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (12 of 110) sys-devel/automake-wrapper-11::gentoo
>>> Installing (12 of 110) sys-devel/automake-wrapper-11::gentoo
>>> Emerging (13 of 110) sys-devel/autoconf-wrapper-13-r1::gentoo
>>> Installing (13 of 110) sys-devel/autoconf-wrapper-13-r1::gentoo
>>> Emerging (14 of 110) sys-apps/opentmpfiles-0.2::gentoo
>>> Emerging (15 of 110) dev-util/gperf-3.1::gentoo
>>> Installing (15 of 110) dev-util/gperf-3.1::gentoo
>>> Installing (10 of 110) sys-apps/baselayout-2.6-r1::gentoo
>>> Installing (14 of 110) sys-apps/opentmpfiles-0.2::gentoo
>>> Installing (9 of 110) sys-apps/busybox-1.29.3::gentoo
>>> Emerging (16 of 110) sys-libs/timezone-data-2018g-r1::gentoo
>>> Installing (16 of 110) sys-libs/timezone-data-2018g-r1::gentoo
>>> Emerging (17 of 110) sys-devel/binutils-config-5-r4::gentoo
>>> Installing (17 of 110) sys-devel/binutils-config-5-r4::gentoo
>>> Emerging (18 of 110) sys-devel/gcc-config-2.0::gentoo
>>> Installing (18 of 110) sys-devel/gcc-config-2.0::gentoo
>>> Emerging (19 of 110) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (19 of 110) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (20 of 110) sys-apps/sysvinit-2.91-r1::gentoo
>>> Installing (20 of 110) sys-apps/sysvinit-2.91-r1::gentoo
>>> Emerging (21 of 110) sys-apps/net-tools-1.60_p20180626073013::gentoo
>>> Installing (21 of 110) sys-apps/net-tools-1.60_p20180626073013::gentoo
>>> Emerging (22 of 110) sys-libs/zlib-1.2.11-r2::gentoo
>>> Installing (22 of 110) sys-libs/zlib-1.2.11-r2::gentoo
>>> Emerging (23 of 110) sys-apps/file-5.34::gentoo
>>> Installing (23 of 110) sys-apps/file-5.34::gentoo
>>> Emerging (24 of 110) sys-devel/patch-2.7.6-r2::gentoo
>>> Failed to emerge sys-devel/patch-2.7.6-r2
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/glibc-2.27-r6:
* Applying Gentoo Glibc Patchset 2.27-3
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/baselayout-2.6-r1:
* You should reboot now to get /run mounted with tmpfs!
* Please run env-update then log out and back in to
* update your path.
* Messages for package sys-apps/busybox-1.29.3:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.29.3 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.29.3 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/timezone-data-2018g-r1:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/sysvinit-2.91-r1:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-devel/patch-2.7.6-r2:
* The ebuild phase 'configure' has exited unexpectedly. This type of
* behavior is known to be triggered by things such as failed variable
* assignments (bug #190128) or bad substitution errors (bug #200313).
* Normally, before exiting, bash should have displayed an error message
* above. If bash did not produce an error message above, it's possible
* that the ebuild has called `exit` when it should have called `die`
* instead. This behavior may also be triggered by a corrupt bash binary or
* a hardware problem such as memory or cpu malfunction. If the problem is
* not reproducible or it appears to occur randomly, then it is likely to
* be triggered by a hardware problem. If you suspect a hardware problem
* then you should try some basic hardware diagnostics such as memtest.
* Please do not report this as a bug unless it is consistently
* reproducible and you are sure that your bash binary and hardware are
* functioning properly.
02 Jan 2019 18:44:12 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
02 Jan 2019 18:44:13 UTC: ERROR : CatalystError: Stage build aborting due to error.
02 Jan 2019 18:44:13 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1355, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1364, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
02 Jan 2019 18:44:13 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
2173.79user 786.08system 32:27.78elapsed 151%CPU (0avgtext+0avgdata 197556maxresident)k
475040inputs+6468760outputs (10major+113671047minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20190102T162102Z.5D4uDO/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2019-01-01 3:54 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2019-01-01 3:54 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (41 of 108) app-misc/pax-utils-1.2.3::gentoo
>>> Emerging (42 of 108) sys-libs/e2fsprogs-libs-1.43.9::gentoo
>>> Emerging (43 of 108) net-firewall/iptables-1.6.1-r3::gentoo
>>> Emerging (44 of 108) sys-apps/kmod-24::gentoo
>>> Installing (42 of 108) sys-libs/e2fsprogs-libs-1.43.9::gentoo
>>> Installing (44 of 108) sys-apps/kmod-24::gentoo
>>> Installing (43 of 108) net-firewall/iptables-1.6.1-r3::gentoo
>>> Emerging (45 of 108) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (46 of 108) sys-apps/hwids-20171003::gentoo
>>> Emerging (47 of 108) app-editors/nano-2.9.8::gentoo
>>> Emerging (48 of 108) net-misc/rsync-3.1.3::gentoo
>>> Installing (46 of 108) sys-apps/hwids-20171003::gentoo
>>> Installing (45 of 108) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (48 of 108) net-misc/rsync-3.1.3::gentoo
>>> Installing (47 of 108) app-editors/nano-2.9.8::gentoo
>>> Emerging (49 of 108) sys-process/procps-3.3.15-r1::gentoo
>>> Emerging (50 of 108) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (51 of 108) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (49 of 108) sys-process/procps-3.3.15-r1::gentoo
>>> Installing (50 of 108) sys-apps/kbd-2.0.4::gentoo
>>> Installing (51 of 108) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (52 of 108) app-shells/bash-4.4_p12::gentoo
>>> Installing (52 of 108) app-shells/bash-4.4_p12::gentoo
>>> Emerging (53 of 108) sys-apps/sandbox-2.13::gentoo
>>> Installing (53 of 108) sys-apps/sandbox-2.13::gentoo
>>> Emerging (54 of 108) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (55 of 108) sys-apps/iproute2-4.17.0-r1::gentoo
>>> Emerging (56 of 108) virtual/editor-0-r2::gentoo
>>> Emerging (57 of 108) sys-apps/less-531::gentoo
>>> Installing (56 of 108) virtual/editor-0-r2::gentoo
>>> Installing (54 of 108) sys-apps/gawk-4.1.4::gentoo
>>> Installing (55 of 108) sys-apps/iproute2-4.17.0-r1::gentoo
>>> Installing (57 of 108) sys-apps/less-531::gentoo
>>> Emerging (58 of 108) sys-apps/grep-3.1-r1::gentoo
>>> Installing (58 of 108) sys-apps/grep-3.1-r1::gentoo
>>> Emerging (59 of 108) sys-libs/pam-1.3.0-r2::gentoo
>>> Installing (59 of 108) sys-libs/pam-1.3.0-r2::gentoo
>>> Emerging (60 of 108) sys-process/psmisc-23.1-r1::gentoo
>>> Installing (60 of 108) sys-process/psmisc-23.1-r1::gentoo
>>> Emerging (61 of 108) sys-apps/util-linux-2.33-r1::gentoo
>>> Installing (61 of 108) sys-apps/util-linux-2.33-r1::gentoo
>>> Emerging (62 of 108) sys-apps/openrc-0.38.3-r1::gentoo
>>> Installing (62 of 108) sys-apps/openrc-0.38.3-r1::gentoo
>>> Emerging (63 of 108) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4::gentoo
>>> Installing (63 of 108) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r4::gentoo
>>> Emerging (64 of 108) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (64 of 108) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (65 of 108) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4::gentoo
>>> Installing (65 of 108) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r4::gentoo
>>> Emerging (66 of 108) virtual/perl-CPAN-Meta-YAML-0.18.0-r3::gentoo
>>> Emerging (67 of 108) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (66 of 108) virtual/perl-CPAN-Meta-YAML-0.18.0-r3::gentoo
>>> Installing (67 of 108) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (68 of 108) virtual/perl-File-Spec-3.630.100_rc-r4::gentoo
>>> Installing (68 of 108) virtual/perl-File-Spec-3.630.100_rc-r4::gentoo
>>> Emerging (69 of 108) virtual/perl-podlators-4.70.0-r1::gentoo
>>> Installing (69 of 108) virtual/perl-podlators-4.70.0-r1::gentoo
>>> Emerging (70 of 108) sys-fs/e2fsprogs-1.43.9::gentoo
>>> Emerging (71 of 108) virtual/perl-Text-ParseWords-3.300.0-r4::gentoo
>>> Installing (71 of 108) virtual/perl-Text-ParseWords-3.300.0-r4::gentoo
>>> Installing (70 of 108) sys-fs/e2fsprogs-1.43.9::gentoo
>>> Emerging (72 of 108) virtual/perl-ExtUtils-Manifest-1.700.0-r5::gentoo
>>> Installing (72 of 108) virtual/perl-ExtUtils-Manifest-1.700.0-r5::gentoo
>>> Emerging (73 of 108) dev-libs/openssl-1.0.2q::gentoo
>>> Installing (73 of 108) dev-libs/openssl-1.0.2q::gentoo
>>> Emerging (74 of 108) net-misc/iputils-20180629::gentoo
>>> Installing (74 of 108) net-misc/iputils-20180629::gentoo
>>> Emerging (75 of 108) net-misc/wget-1.19.5-r1::gentoo
>>> Emerging (76 of 108) app-misc/ca-certificates-20170717.3.36.1::gentoo
>>> Installing (76 of 108) app-misc/ca-certificates-20170717.3.36.1::gentoo
>>> Installing (75 of 108) net-misc/wget-1.19.5-r1::gentoo
>>> Emerging (77 of 108) sys-apps/groff-1.22.3::gentoo
>>> Emerging (78 of 108) sys-devel/automake-1.16.1-r1::gentoo
>>> Failed to emerge sys-devel/automake-1.16.1-r1
>>> Installing (77 of 108) sys-apps/groff-1.22.3::gentoo
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/glibc-2.27-r6:
* Applying Gentoo Glibc Patchset 2.27-3
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/baselayout-2.6-r1:
* You should reboot now to get /run mounted with tmpfs!
* Please run env-update then log out and back in to
* update your path.
* Messages for package sys-apps/busybox-1.29.3:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.29.3 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.29.3 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/timezone-data-2018g-r1:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/sysvinit-2.91-r1:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/coreutils-8.29-r1:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-devel/gcc-7.3.0-r3:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-libs/pam-1.3.0-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.33-r1:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-apps/openrc-0.38.3-r1:
* Auto-adding 'cgroups' service to your sysinit runlevel
* Messages for package app-misc/ca-certificates-20170717.3.36.1:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
*
* Messages for package sys-devel/automake-1.16.1-r1:
* ERROR: sys-devel/automake-1.16.1-r1::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/automake-1.16.1-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/automake-1.16.1-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/automake-1.16.1-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/automake-1.16.1-r1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/automake-1.16.1-r1/work/automake-1.16.1'
* S: '/var/tmp/portage/sys-devel/automake-1.16.1-r1/work/automake-1.16.1'
!!! existing preserved libs found
01 Jan 2019 03:54:45 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
01 Jan 2019 03:54:45 UTC: ERROR : CatalystError: Stage build aborting due to error.
01 Jan 2019 03:54:45 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1355, in run_local
env=self.env)
File "/usr/lib64/python3.6/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1460, in run
getattr(self, x)()
File "/usr/lib64/python3.6/site-packages/catalyst/base/stagebase.py", line 1364, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
01 Jan 2019 03:54:45 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
13226.36user 3156.90system 2:35:22elapsed 175%CPU (0avgtext+0avgdata 455628maxresident)k
513736inputs+20416808outputs (11major+484402901minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20181231T222102Z.Em0DaM/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-09-07 12:37 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-09-07 12:37 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
07 Sep 2018 12:37:10 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
07 Sep 2018 12:37:10 UTC: NOTICE : conf_values[options] = {'preserve_libs', 'bindist', 'clear-autoresume', 'pkgcache'}
07 Sep 2018 12:37:10 UTC: NOTICE : Processing spec file: i686/stage1.spec
07 Sep 2018 12:37:10 UTC: NOTICE : Using target: stage1
07 Sep 2018 12:37:10 UTC: NOTICE : Source file specification matching setting is: loose
07 Sep 2018 12:37:10 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
07 Sep 2018 12:37:10 UTC: ERROR : CatalystError: File Not Found: /home/release/buildroot/x86-dev/snapshots/gentoo-20180815T030004Z
Command exited with non-zero status 2
0.09user 0.00system 0:00.23elapsed 41%CPU (0avgtext+0avgdata 17844maxresident)k
0inputs+0outputs (0major+8774minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180815T030004Z.tHhxKG/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-09-07 12:36 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-09-07 12:36 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
07 Sep 2018 12:36:00 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
07 Sep 2018 12:36:00 UTC: NOTICE : conf_values[options] = {'clear-autoresume', 'pkgcache', 'bindist', 'preserve_libs'}
07 Sep 2018 12:36:00 UTC: NOTICE : Processing spec file: i686/stage1.spec
07 Sep 2018 12:36:00 UTC: NOTICE : Using target: stage1
07 Sep 2018 12:36:00 UTC: NOTICE : Source file specification matching setting is: loose
07 Sep 2018 12:36:00 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
07 Sep 2018 12:36:00 UTC: ERROR : CatalystError: File Not Found: /home/release/buildroot/x86-dev/snapshots/gentoo-20180822T030004Z
Command exited with non-zero status 2
0.09user 0.00system 0:00.17elapsed 55%CPU (0avgtext+0avgdata 17816maxresident)k
0inputs+0outputs (0major+8762minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180822T030004Z.EUkad8/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-07-08 1:38 catalyst
2018-07-08 9:15 ` M. J. Everitt
0 siblings, 1 reply; 151+ messages in thread
From: catalyst @ 2018-07-08 1:38 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
08 Jul 2018 01:37:52 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
08 Jul 2018 01:37:52 UTC: NOTICE : conf_values[options] = {'pkgcache', 'bindist', 'preserve_libs', 'clear-autoresume'}
08 Jul 2018 01:37:52 UTC: NOTICE : Processing spec file: i686/stage1.spec
08 Jul 2018 01:37:52 UTC: NOTICE : Using target: stage1
08 Jul 2018 01:37:52 UTC: NOTICE : Source file specification matching setting is: loose
08 Jul 2018 01:37:52 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
08 Jul 2018 01:37:52 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
08 Jul 2018 01:37:52 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/tmp/stage1root
08 Jul 2018 01:37:52 UTC: NOTICE : --- Running action sequence: unpack
08 Jul 2018 01:37:52 UTC: NOTICE : Clearing the chroot path ...
08 Jul 2018 01:37:52 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z
08 Jul 2018 01:37:52 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
08 Jul 2018 01:37:52 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z (this may take some time) ..
08 Jul 2018 01:37:55 UTC: NOTICE : --- Running action sequence: unpack_snapshot
08 Jul 2018 01:37:55 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: setup_confdir
08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: portage_overlay
08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: base_dirs
08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: bind
08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: chroot_setup
08 Jul 2018 01:38:09 UTC: NOTICE : Setting up chroot...
08 Jul 2018 01:38:09 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
08 Jul 2018 01:38:09 UTC: WARNING : If your build fails look here first as the possible problem.
08 Jul 2018 01:38:09 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
08 Jul 2018 01:38:09 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
08 Jul 2018 01:38:09 UTC: WARNING : You have been warned.
08 Jul 2018 01:38:09 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/etc/portage/make.conf
08 Jul 2018 01:38:09 UTC: NOTICE : STICKY-CONFIG is enabled
08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: setup_environment
08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z /tmp/stage1-chroot.sh
Full build log at /home/release/tmp/run/catalyst-auto.20180704T030004Z.xuBZnC/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
2018-07-08 1:38 catalyst
@ 2018-07-08 9:15 ` M. J. Everitt
0 siblings, 0 replies; 151+ messages in thread
From: M. J. Everitt @ 2018-07-08 9:15 UTC (permalink / raw
To: gentoo-releng-autobuilds, catalyst, jmbsvicetto
[-- Attachment #1.1: Type: text/plain, Size: 3958 bytes --]
On 08/07/18 02:38, catalyst@thor.jmbsvicetto.name wrote:
> *** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
> 08 Jul 2018 01:37:52 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
> 08 Jul 2018 01:37:52 UTC: NOTICE : conf_values[options] = {'pkgcache', 'bindist', 'preserve_libs', 'clear-autoresume'}
> 08 Jul 2018 01:37:52 UTC: NOTICE : Processing spec file: i686/stage1.spec
> 08 Jul 2018 01:37:52 UTC: NOTICE : Using target: stage1
> 08 Jul 2018 01:37:52 UTC: NOTICE : Source file specification matching setting is: loose
> 08 Jul 2018 01:37:52 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
> 08 Jul 2018 01:37:52 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
> 08 Jul 2018 01:37:52 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/tmp/stage1root
> 08 Jul 2018 01:37:52 UTC: NOTICE : --- Running action sequence: unpack
> 08 Jul 2018 01:37:52 UTC: NOTICE : Clearing the chroot path ...
> 08 Jul 2018 01:37:52 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z
> 08 Jul 2018 01:37:52 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
> 08 Jul 2018 01:37:52 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z (this may take some time) ..
> 08 Jul 2018 01:37:55 UTC: NOTICE : --- Running action sequence: unpack_snapshot
> 08 Jul 2018 01:37:55 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
> 08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: setup_confdir
> 08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: portage_overlay
> 08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: base_dirs
> 08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: bind
> 08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: chroot_setup
> 08 Jul 2018 01:38:09 UTC: NOTICE : Setting up chroot...
> 08 Jul 2018 01:38:09 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
> 08 Jul 2018 01:38:09 UTC: WARNING : If your build fails look here first as the possible problem.
> 08 Jul 2018 01:38:09 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
> 08 Jul 2018 01:38:09 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
> 08 Jul 2018 01:38:09 UTC: WARNING : You have been warned.
> 08 Jul 2018 01:38:09 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/etc/portage/make.conf
> 08 Jul 2018 01:38:09 UTC: NOTICE : STICKY-CONFIG is enabled
> 08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: setup_environment
> 08 Jul 2018 01:38:09 UTC: NOTICE : --- Running action sequence: run_local
> copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/tmp/stage1root/etc/portage
> Copying stage1-chroot.sh to /tmp
> copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/tmp
> copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z/tmp
> Ensure the file has the executable bit set
> Running stage1-chroot.sh in chroot:
> setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180704T030004Z /tmp/stage1-chroot.sh
>
>
>
> Full build log at /home/release/tmp/run/catalyst-auto.20180704T030004Z.xuBZnC/log/i686_stage1.log
>
Can the build logs be made available online - eg. via dev.gentoo.org or
such, so that these can be viewed by non-devs, please?
Thanks!
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 151+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-04-13 21:57 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-04-13 21:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
13 Apr 2018 21:53:18 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
13 Apr 2018 21:53:18 UTC: NOTICE : conf_values[options] = {'snapcache', 'autoresume', 'preserve_libs', 'bindist', 'pkgcache', 'seedcache', 'clear-autoresume'}
13 Apr 2018 21:53:18 UTC: NOTICE : Processing spec file: i686/stage1.spec
13 Apr 2018 21:53:18 UTC: NOTICE : Using target: stage1
13 Apr 2018 21:53:18 UTC: NOTICE : Source file specification matching setting is: loose
13 Apr 2018 21:53:18 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
13 Apr 2018 21:53:20 UTC: NOTICE : Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
13 Apr 2018 21:53:20 UTC: NOTICE : stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20180413T214503Z/tmp/stage1root
13 Apr 2018 21:53:20 UTC: NOTICE : Removing AutoResume Points ...
13 Apr 2018 21:53:20 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20180413T214503Z
13 Apr 2018 21:53:20 UTC: NOTICE : --- Running action sequence: unpack
13 Apr 2018 21:53:20 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
13 Apr 2018 21:53:20 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
13 Apr 2018 21:53:20 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
13 Apr 2018 21:53:20 UTC: NOTICE : Removing AutoResume Points ...
13 Apr 2018 21:53:20 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20180413T214503Z
13 Apr 2018 21:53:20 UTC: NOTICE : Clearing the chroot path ...
13 Apr 2018 21:53:20 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage1-i686-20180413T214503Z
13 Apr 2018 21:53:20 UTC: NOTICE : Starting auto from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
13 Apr 2018 21:53:20 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180413T214503Z (this may take some time) ..
13 Apr 2018 21:53:24 UTC: NOTICE : --- Running action sequence: unpack_snapshot
13 Apr 2018 21:53:24 UTC: NOTICE : --- Running action sequence: setup_confdir
13 Apr 2018 21:53:24 UTC: NOTICE : --- Running action sequence: portage_overlay
13 Apr 2018 21:53:24 UTC: NOTICE : --- Running action sequence: base_dirs
13 Apr 2018 21:53:24 UTC: NOTICE : --- Running action sequence: bind
13 Apr 2018 21:53:24 UTC: NOTICE : --- Running action sequence: chroot_setup
13 Apr 2018 21:53:24 UTC: NOTICE : Setting up chroot...
13 Apr 2018 21:53:24 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
13 Apr 2018 21:53:24 UTC: WARNING : If your build fails look here first as the possible problem.
13 Apr 2018 21:53:24 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
13 Apr 2018 21:53:24 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
13 Apr 2018 21:53:24 UTC: WARNING : You have been warned.
13 Apr 2018 21:53:24 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20180413T214503Z/etc/portage/make.conf
13 Apr 2018 21:53:24 UTC: NOTICE : STICKY-CONFIG is enabled
13 Apr 2018 21:53:24 UTC: NOTICE : --- Running action sequence: setup_environment
13 Apr 2018 21:53:24 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180413T214503Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180413T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180413T214503Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20180413T214503Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
[nomerge ] virtual/package-manager-1::gentoo [0::gentoo]
[nomerge ] sys-apps/portage-2.3.24-r1::gentoo USE="build (ipc) native-extensions xattr -doc -epydoc -gentoo-dev -rsync-verify (-selinux)" PYTHON_TARGETS="python2_7 python3_5 -pypy -python3_4 -python3_6"
[nomerge ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 (-pypy) -python3_5"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 (-pypy) (-pypy3) -python3_5 -python3_6"
[nomerge ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[ebuild R ] dev-python/certifi-2017.4.17::gentoo PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild U ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
Total: 4 packages (1 upgrade, 3 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r3:0/0::gentoo, installed) pulled in by
>=sys-libs/readline-4.1:0/0= required by (dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, installed)
^^^^^
(and 2 more with the same problem)
dev-python/setuptools:0
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge)
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/certifi-2017.4.17:0/0::gentoo, ebuild scheduled for merge)
sys-libs/gdbm:0
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/gdbm-1.11:0/0::gentoo, installed) pulled in by
sys-libs/gdbm:0/0=[berkdb] required by (dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, installed)
^^^^^
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/certifi-2017.4.17::gentoo
>=dev-python/six-1.11.0 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/certifi-2017.4.17::gentoo
>=dev-python/packaging-16.8 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/certifi-2017.4.17::gentoo
>=dev-python/appdirs-1.4.3 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/certifi-2017.4.17 python_targets_python3_4
# required by dev-python/packaging-16.8::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/certifi-2017.4.17::gentoo
>=dev-python/pyparsing-2.2.0 python_targets_python3_4
# required by dev-python/certifi-2017.4.17::gentoo
>=dev-python/setuptools-34.0.2-r1 python_targets_python3_4
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
emerge: there are no ebuilds built with USE flags to satisfy ">=dev-python/six-1.10.0[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)]".
!!! One of the following packages is required to complete your request:
- dev-python/six-1.10.0::gentoo (Change USE: +python_targets_python3_4)
- dev-python/setuptools-34.0.2-r1::gentoo (Change USE: -python_targets_python3_4)
(dependency required by "dev-python/setuptools-34.0.2-r1::gentoo" [installed])
(dependency required by "dev-python/pyxattr-0.5.5::gentoo" [installed])
(dependency required by "sys-apps/portage-2.3.24-r1::gentoo[python_targets_python2_7,-python_targets_pypy,xattr]" [installed])
(dependency required by "virtual/package-manager-1::gentoo" [ebuild])
(dependency required by "@system" [set])
(dependency required by "@world" [argument])
13 Apr 2018 21:57:00 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
13 Apr 2018 21:57:00 UTC: ERROR : CatalystError: Stage build aborting due to error.
13 Apr 2018 21:57:00 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
13 Apr 2018 21:57:00 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
288.66user 82.84system 3:42.04elapsed 167%CPU (0avgtext+0avgdata 848640maxresident)k
469224inputs+2630872outputs (0major+11304048minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180413T214503Z.KNZPLk/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-04-11 21:57 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-04-11 21:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
11 Apr 2018 21:53:27 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180411T214503Z (this may take some time) ..
11 Apr 2018 21:53:32 UTC: NOTICE : --- Running action sequence: unpack_snapshot
11 Apr 2018 21:53:32 UTC: NOTICE : --- Running action sequence: setup_confdir
11 Apr 2018 21:53:32 UTC: NOTICE : --- Running action sequence: portage_overlay
11 Apr 2018 21:53:32 UTC: NOTICE : --- Running action sequence: base_dirs
11 Apr 2018 21:53:32 UTC: NOTICE : --- Running action sequence: bind
11 Apr 2018 21:53:32 UTC: NOTICE : --- Running action sequence: chroot_setup
11 Apr 2018 21:53:32 UTC: NOTICE : Setting up chroot...
11 Apr 2018 21:53:32 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
11 Apr 2018 21:53:32 UTC: WARNING : If your build fails look here first as the possible problem.
11 Apr 2018 21:53:32 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
11 Apr 2018 21:53:32 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
11 Apr 2018 21:53:32 UTC: WARNING : You have been warned.
11 Apr 2018 21:53:32 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20180411T214503Z/etc/portage/make.conf
11 Apr 2018 21:53:32 UTC: NOTICE : STICKY-CONFIG is enabled
11 Apr 2018 21:53:32 UTC: NOTICE : --- Running action sequence: setup_environment
11 Apr 2018 21:53:32 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180411T214503Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180411T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180411T214503Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20180411T214503Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
[nomerge ] virtual/package-manager-1::gentoo [0::gentoo]
[nomerge ] sys-apps/portage-2.3.24-r1::gentoo USE="build (ipc) native-extensions xattr -doc -epydoc -gentoo-dev -rsync-verify (-selinux)" PYTHON_TARGETS="python2_7 python3_5 -pypy -python3_4 -python3_6"
[nomerge ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 (-pypy) -python3_5"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 (-pypy) (-pypy3) -python3_5 -python3_6"
[nomerge ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[ebuild R ] dev-python/certifi-2017.4.17::gentoo PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild U ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
Total: 4 packages (1 upgrade, 3 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-6.3_p8-r3:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.41-r1:3/3::gentoo, installed)
^^^^^
(and 2 more with the same problem)
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
^^ ^^^^^^
dev-python/setuptools:0
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/certifi-2017.4.17:0/0::gentoo, ebuild scheduled for merge)
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge)
sys-libs/gdbm:0
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/gdbm-1.11:0/0::gentoo, installed) pulled in by
sys-libs/gdbm:0/0=[berkdb] required by (dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, installed)
^^^^^
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[-python_targets_pypy,xattr,python_targets_python2_7]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/packaging-16.8 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/certifi-2017.4.17 python_targets_python3_4
# required by dev-python/packaging-16.8::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[-python_targets_pypy,xattr,python_targets_python2_7]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/pyparsing-2.2.0 python_targets_python3_4
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[-python_targets_pypy,xattr,python_targets_python2_7]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/setuptools-34.0.2-r1 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/certifi-2017.4.17::gentoo
>=dev-python/six-1.11.0 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/appdirs-1.4.3 python_targets_python3_4
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! All ebuilds that could satisfy ">=dev-python/packaging-16.8[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)]" have been masked.
!!! One of the following masked packages is required to complete your request:
- dev-python/packaging-16.8::gentoo (masked by: )
(dependency required by "dev-python/setuptools-34.0.2-r1::gentoo" [installed])
(dependency required by "dev-python/pyxattr-0.5.5::gentoo" [installed])
(dependency required by "sys-apps/portage-2.3.24-r1::gentoo[-python_targets_pypy,xattr,python_targets_python2_7]" [installed])
(dependency required by "virtual/package-manager-1::gentoo" [ebuild])
(dependency required by "@system" [set])
(dependency required by "@world" [argument])
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
11 Apr 2018 21:57:08 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
11 Apr 2018 21:57:08 UTC: ERROR : CatalystError: Stage build aborting due to error.
11 Apr 2018 21:57:08 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
11 Apr 2018 21:57:08 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
289.59user 81.72system 3:43.49elapsed 166%CPU (0avgtext+0avgdata 789792maxresident)k
475312inputs+2631048outputs (0major+11310092minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180411T214503Z.d26Zsr/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-04-09 21:57 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-04-09 21:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
09 Apr 2018 21:53:29 UTC: NOTICE : --- Running action sequence: unpack_snapshot
09 Apr 2018 21:53:29 UTC: NOTICE : --- Running action sequence: setup_confdir
09 Apr 2018 21:53:29 UTC: NOTICE : --- Running action sequence: portage_overlay
09 Apr 2018 21:53:29 UTC: NOTICE : --- Running action sequence: base_dirs
09 Apr 2018 21:53:29 UTC: NOTICE : --- Running action sequence: bind
09 Apr 2018 21:53:29 UTC: NOTICE : --- Running action sequence: chroot_setup
09 Apr 2018 21:53:29 UTC: NOTICE : Setting up chroot...
09 Apr 2018 21:53:29 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
09 Apr 2018 21:53:29 UTC: WARNING : If your build fails look here first as the possible problem.
09 Apr 2018 21:53:29 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
09 Apr 2018 21:53:29 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
09 Apr 2018 21:53:29 UTC: WARNING : You have been warned.
09 Apr 2018 21:53:29 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20180409T214502Z/etc/portage/make.conf
09 Apr 2018 21:53:29 UTC: NOTICE : STICKY-CONFIG is enabled
09 Apr 2018 21:53:29 UTC: NOTICE : --- Running action sequence: setup_environment
09 Apr 2018 21:53:29 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180409T214502Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180409T214502Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180409T214502Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20180409T214502Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
[nomerge ] virtual/package-manager-1::gentoo [0::gentoo]
[nomerge ] sys-apps/portage-2.3.24-r1::gentoo USE="build (ipc) native-extensions xattr -doc -epydoc -gentoo-dev -rsync-verify (-selinux)" PYTHON_TARGETS="python2_7 python3_5 -pypy -python3_4 -python3_6"
[nomerge ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 (-pypy) -python3_5"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 (-pypy) (-pypy3) -python3_5 -python3_6"
[nomerge ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[ebuild R ] dev-python/certifi-2017.4.17::gentoo PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild U ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
Total: 4 packages (1 upgrade, 3 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r3:0/0::gentoo, installed) pulled in by
>=sys-libs/readline-4.1:0/0= required by (dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, installed)
^^^^^
(and 2 more with the same problem)
sys-libs/gdbm:0
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/gdbm-1.11:0/0::gentoo, installed) pulled in by
sys-libs/gdbm:0/0=[berkdb] required by (dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, installed)
^^^^^
dev-python/setuptools:0
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/certifi-2017.4.17:0/0::gentoo, ebuild scheduled for merge)
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/packaging-16.8::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[xattr,python_targets_python2_7,-python_targets_pypy]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/pyparsing-2.2.0 python_targets_python3_4
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/setuptools-34.0.2-r1 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[xattr,python_targets_python2_7,-python_targets_pypy]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/six-1.11.0 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/appdirs-1.4.3 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/certifi-2017.4.17 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[xattr,python_targets_python2_7,-python_targets_pypy]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/packaging-16.8 python_targets_python3_4
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
emerge: there are no ebuilds built with USE flags to satisfy "dev-python/six[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)]".
!!! One of the following packages is required to complete your request:
- dev-python/six-1.10.0::gentoo (Change USE: +python_targets_python3_4)
- dev-python/packaging-16.8::gentoo (Change USE: -python_targets_python3_4)
(dependency required by "dev-python/packaging-16.8::gentoo" [ebuild])
(dependency required by "dev-python/setuptools-34.0.2-r1::gentoo" [ebuild])
(dependency required by "dev-python/six-1.11.0::gentoo" [ebuild])
(dependency required by "dev-python/setuptools-34.0.2-r1::gentoo" [installed])
(dependency required by "dev-python/pyxattr-0.5.5::gentoo" [installed])
(dependency required by "sys-apps/portage-2.3.24-r1::gentoo[xattr,python_targets_python2_7,-python_targets_pypy]" [installed])
(dependency required by "virtual/package-manager-1::gentoo" [ebuild])
(dependency required by "@system" [set])
(dependency required by "@world" [argument])
09 Apr 2018 21:57:06 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
09 Apr 2018 21:57:07 UTC: ERROR : CatalystError: Stage build aborting due to error.
09 Apr 2018 21:57:07 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
09 Apr 2018 21:57:07 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
289.54user 83.10system 3:44.22elapsed 166%CPU (0avgtext+0avgdata 816784maxresident)k
474864inputs+2631064outputs (0major+11316861minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180409T214502Z.NKtpdv/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-04-06 21:57 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-04-06 21:57 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
06 Apr 2018 21:53:42 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
06 Apr 2018 21:53:42 UTC: WARNING : If your build fails look here first as the possible problem.
06 Apr 2018 21:53:42 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
06 Apr 2018 21:53:42 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
06 Apr 2018 21:53:42 UTC: WARNING : You have been warned.
06 Apr 2018 21:53:42 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20180406T214503Z/etc/portage/make.conf
06 Apr 2018 21:53:42 UTC: NOTICE : STICKY-CONFIG is enabled
06 Apr 2018 21:53:42 UTC: NOTICE : --- Running action sequence: setup_environment
06 Apr 2018 21:53:42 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180406T214503Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180406T214503Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180406T214503Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20180406T214503Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
[nomerge ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[nomerge ] dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo [3.4.5:3.4/3.4m::gentoo] USE="gdbm ipv6 ncurses readline ssl (threads) xml -build -examples -hardened -libressl -sqlite {-test%} -tk -wininst"
[nomerge ] sys-devel/autoconf-2.69-r4:2.69::gentoo [2.69:2.5::gentoo] USE="-emacs"
[nomerge ] dev-lang/perl-5.24.3-r1:0/5.24::gentoo [5.24.3:0/5.24::gentoo] USE="berkdb gdbm -debug -doc -ithreads"
[nomerge ] app-admin/perl-cleaner-2.25::gentoo
[nomerge ] sys-apps/portage-2.3.24-r1::gentoo USE="build (ipc) native-extensions xattr -doc -epydoc -gentoo-dev -rsync-verify (-selinux)" PYTHON_TARGETS="python2_7 python3_5 -pypy -python3_4 -python3_6"
[nomerge ] dev-python/pyxattr-0.5.5::gentoo USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 (-pypy) -python3_5"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 (-pypy) (-pypy3) -python3_5 -python3_6"
[nomerge ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[ebuild R ] dev-python/certifi-2017.4.17::gentoo PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild U ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
Total: 4 packages (1 upgrade, 3 reinstalls), Size of downloads: 0 KiB
* Error: circular dependencies:
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r3:0/0::gentoo, installed) pulled in by
sys-libs/readline:0/0= required by (dev-libs/libpcre-8.41-r1:3/3::gentoo, installed)
^^^^^
(and 2 more with the same problem)
sys-libs/gdbm:0
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/gdbm-1.11:0/0::gentoo, installed) pulled in by
sys-libs/gdbm:0/0=[berkdb] required by (dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, installed)
^^^^^
dev-python/setuptools:0
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/certifi-2017.4.17:0/0::gentoo, ebuild scheduled for merge)
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/certifi-2017.4.17 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[xattr,-python_targets_pypy,python_targets_python2_7]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/six-1.11.0 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[xattr,-python_targets_pypy,python_targets_python2_7]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/packaging-16.8 python_targets_python3_4
# required by dev-python/packaging-16.8::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[xattr,-python_targets_pypy,python_targets_python2_7]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/pyparsing-2.2.0 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/appdirs-1.4.3 python_targets_python3_4
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[xattr,-python_targets_pypy,python_targets_python2_7]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/setuptools-34.0.2-r1 python_targets_python3_4
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! All ebuilds that could satisfy ">=dev-python/packaging-16.8[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)]" have been masked.
!!! One of the following masked packages is required to complete your request:
- dev-python/packaging-16.8::gentoo (masked by: )
(dependency required by "dev-python/setuptools-34.0.2-r1::gentoo" [ebuild])
(dependency required by "dev-python/pyxattr-0.5.5::gentoo" [installed])
(dependency required by "sys-apps/portage-2.3.24-r1::gentoo[xattr,-python_targets_pypy,python_targets_python2_7]" [installed])
(dependency required by "virtual/package-manager-1::gentoo" [ebuild])
(dependency required by "@system" [set])
(dependency required by "@world" [argument])
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
06 Apr 2018 21:57:17 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
06 Apr 2018 21:57:17 UTC: ERROR : CatalystError: Stage build aborting due to error.
06 Apr 2018 21:57:17 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
06 Apr 2018 21:57:17 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
289.68user 82.86system 3:41.75elapsed 167%CPU (0avgtext+0avgdata 829904maxresident)k
475504inputs+2631072outputs (0major+11315444minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180406T214503Z.eY9E86/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-04-02 21:55 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-04-02 21:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
02 Apr 2018 21:52:05 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20180402T214502Z
02 Apr 2018 21:52:05 UTC: NOTICE : --- Running action sequence: unpack
02 Apr 2018 21:52:05 UTC: NOTICE : Referenced SEEDCACHE does not appear to be a directory, trying to untar...
02 Apr 2018 21:52:05 UTC: NOTICE : Resume: "seed source" unpack resume point is disabled
02 Apr 2018 21:52:05 UTC: NOTICE : Resume: Target chroot is invalid, cleaning up...
02 Apr 2018 21:52:05 UTC: NOTICE : Removing AutoResume Points ...
02 Apr 2018 21:52:05 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20180402T214502Z
02 Apr 2018 21:52:05 UTC: NOTICE : Clearing the chroot path ...
02 Apr 2018 21:52:05 UTC: NOTICE : Emptying directory: /release/buildroot/x86-dev/tmp/default/stage1-i686-20180402T214502Z
02 Apr 2018 21:52:05 UTC: NOTICE : Starting auto from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
02 Apr 2018 21:52:05 UTC: NOTICE : to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180402T214502Z (this may take some time) ..
02 Apr 2018 21:52:10 UTC: NOTICE : --- Running action sequence: unpack_snapshot
02 Apr 2018 21:52:10 UTC: NOTICE : --- Running action sequence: setup_confdir
02 Apr 2018 21:52:10 UTC: NOTICE : --- Running action sequence: portage_overlay
02 Apr 2018 21:52:10 UTC: NOTICE : --- Running action sequence: base_dirs
02 Apr 2018 21:52:10 UTC: NOTICE : --- Running action sequence: bind
02 Apr 2018 21:52:10 UTC: NOTICE : --- Running action sequence: chroot_setup
02 Apr 2018 21:52:10 UTC: NOTICE : Setting up chroot...
02 Apr 2018 21:52:10 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
02 Apr 2018 21:52:10 UTC: WARNING : If your build fails look here first as the possible problem.
02 Apr 2018 21:52:10 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
02 Apr 2018 21:52:10 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
02 Apr 2018 21:52:10 UTC: WARNING : You have been warned.
02 Apr 2018 21:52:10 UTC: NOTICE : Writing the stage make.conf to: /release/buildroot/x86-dev/tmp/default/stage1-i686-20180402T214502Z/etc/portage/make.conf
02 Apr 2018 21:52:10 UTC: NOTICE : STICKY-CONFIG is enabled
02 Apr 2018 21:52:10 UTC: NOTICE : --- Running action sequence: setup_environment
02 Apr 2018 21:52:10 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180402T214502Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180402T214502Z/tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20180402T214502Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20180402T214502Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (1 of 2) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
>>> Installing (2 of 2) sys-apps/portage-2.3.24-r1::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
[nomerge ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[nomerge ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[nomerge ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6"
[ebuild R ] dev-python/certifi-2017.4.17::gentoo PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/setuptools-34.0.2-r1::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild R ] dev-python/packaging-16.8::gentoo USE="{-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 0 KiB
[ebuild U ] dev-python/six-1.11.0::gentoo [1.10.0::gentoo] USE="-doc {-test}" PYTHON_TARGETS="python2_7 python3_4 python3_5* (-pypy) (-pypy3) -python3_6" 30 KiB
Total: 4 packages (1 upgrade, 3 reinstalls), Size of downloads: 30 KiB
* Error: circular dependencies:
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) (buildtime)
(dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge) (buildtime)
* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/readline:0
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/readline-7.0:0= required by (app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
^^ ^^^^^^
(sys-libs/readline-6.3_p8-r3:0/0::gentoo, installed) pulled in by
>=sys-libs/readline-4.1:0/0= required by (dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, installed)
^^^^^
(and 2 more with the same problem)
dev-python/setuptools:0
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(dev-python/setuptools-34.0.2-r1:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/certifi-2017.4.17:0/0::gentoo, ebuild scheduled for merge)
dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)] required by (dev-python/six-1.11.0:0/0::gentoo, ebuild scheduled for merge)
sys-libs/gdbm:0
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/gdbm-1.11:0/0::gentoo, installed) pulled in by
sys-libs/gdbm:0/0=[berkdb] required by (dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, installed)
^^^^^
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
It may be possible to solve this problem by using package.mask to
prevent one of those packages from being selected. However, it is also
possible that conflicting dependencies exist such that they are
impossible to satisfy simultaneously. If such a conflict exists in
the dependencies of two different packages, then those packages can
not be installed simultaneously.
For more information, see MASKED PACKAGES section in the emerge man
page or refer to the Gentoo Handbook.
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/pyxattr-0.5.5::gentoo
# required by sys-apps/portage-2.3.24-r1::gentoo[xattr,python_targets_python2_7,-python_targets_pypy]
# required by virtual/package-manager-1::gentoo
# required by @system
# required by @world (argument)
>=dev-python/six-1.11.0 python_targets_python3_4
# required by dev-python/packaging-16.8::gentoo
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/certifi-2017.4.17::gentoo
>=dev-python/pyparsing-2.2.0 python_targets_python3_4
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/setuptools-34.0.2-r1 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/certifi-2017.4.17::gentoo
>=dev-python/packaging-16.8 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/certifi-2017.4.17::gentoo
>=dev-python/appdirs-1.4.3 python_targets_python3_4
# required by dev-python/setuptools-34.0.2-r1::gentoo
# required by dev-python/six-1.11.0::gentoo
# required by dev-python/packaging-16.8::gentoo
>=dev-python/certifi-2017.4.17 python_targets_python3_4
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
* In order to avoid wasting time, backtracking has terminated early
* due to the above autounmask change(s). The --autounmask-backtrack=y
* option can be used to force further backtracking, but there is no
* guarantee that it will produce a solution.
!!! All ebuilds that could satisfy "dev-python/setuptools[python_targets_pypy(-)?,python_targets_pypy3(-)?,python_targets_python2_7(-)?,python_targets_python3_4(-)?,python_targets_python3_5(-)?,python_targets_python3_6(-)?,-python_single_target_pypy(-),-python_single_target_pypy3(-),-python_single_target_python2_7(-),-python_single_target_python3_4(-),-python_single_target_python3_5(-),-python_single_target_python3_6(-)]" have been masked.
!!! One of the following masked packages is required to complete your request:
- dev-python/setuptools-9999::gentoo (masked by: missing keyword)
- dev-python/setuptools-38.5.1::gentoo (masked by: ~x86 keyword)
- dev-python/setuptools-36.7.2::gentoo (masked by: ~x86 keyword)
- dev-python/setuptools-36.0.1::gentoo (masked by: ~x86 keyword)
- dev-python/setuptools-34.0.2-r1::gentoo (masked by: )
(dependency required by "dev-python/six-1.11.0::gentoo" [ebuild])
(dependency required by "dev-python/setuptools-34.0.2-r1::gentoo" [installed])
(dependency required by "dev-python/pyxattr-0.5.5::gentoo" [installed])
(dependency required by "sys-apps/portage-2.3.24-r1::gentoo[xattr,python_targets_python2_7,-python_targets_pypy]" [installed])
(dependency required by "virtual/package-manager-1::gentoo" [ebuild])
(dependency required by "@system" [set])
(dependency required by "@world" [argument])
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
02 Apr 2018 21:55:47 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
02 Apr 2018 21:55:47 UTC: ERROR : CatalystError: Stage build aborting due to error.
02 Apr 2018 21:55:47 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
02 Apr 2018 21:55:47 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
290.01user 81.14system 3:44.50elapsed 165%CPU (0avgtext+0avgdata 823904maxresident)k
473712inputs+2631056outputs (1major+11427736minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180402T214502Z.oiZDyL/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-02-17 0:55 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-02-17 0:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (22 of 59) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Installing (24 of 59) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (23 of 59) net-misc/iputils-20171016_pre::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (25 of 59) dev-libs/expat-2.2.5::gentoo
>>> Installing (25 of 59) dev-libs/expat-2.2.5::gentoo
>>> Emerging (26 of 59) sys-libs/readline-7.0_p3::gentoo
>>> Installing (26 of 59) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (27 of 59) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (28 of 59) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (29 of 59) sys-apps/kmod-24::gentoo
>>> Emerging (30 of 59) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (31 of 59) net-misc/rsync-3.1.3::gentoo
>>> Emerging (32 of 59) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (33 of 59) app-misc/pax-utils-1.2.2-r2::gentoo
>>> Installing (27 of 59) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (29 of 59) sys-apps/kmod-24::gentoo
>>> Installing (28 of 59) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (30 of 59) sys-apps/kbd-2.0.4::gentoo
>>> Installing (33 of 59) app-misc/pax-utils-1.2.2-r2::gentoo
>>> Installing (31 of 59) net-misc/rsync-3.1.3::gentoo
>>> Installing (32 of 59) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (34 of 59) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (35 of 59) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (35 of 59) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (34 of 59) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (36 of 59) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (36 of 59) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (37 of 59) app-shells/bash-4.4_p12::gentoo
>>> Installing (37 of 59) app-shells/bash-4.4_p12::gentoo
>>> Emerging (38 of 59) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (39 of 59) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (39 of 59) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (38 of 59) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (40 of 59) sys-apps/sandbox-2.12::gentoo
>>> Installing (40 of 59) sys-apps/sandbox-2.12::gentoo
>>> Emerging (41 of 59) sys-apps/less-529::gentoo
>>> Emerging (42 of 59) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (41 of 59) sys-apps/less-529::gentoo
>>> Installing (42 of 59) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (43 of 59) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (43 of 59) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (44 of 59) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (44 of 59) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (45 of 59) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (45 of 59) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (46 of 59) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (46 of 59) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (47 of 59) sys-devel/gcc-6.4.0-r1::gentoo
>>> Installing (47 of 59) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (48 of 59) app-arch/tar-1.29-r3::gentoo
>>> Installing (48 of 59) app-arch/tar-1.29-r3::gentoo
>>> Emerging (49 of 59) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (50 of 59) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (51 of 59) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (51 of 59) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (52 of 59) dev-util/intltool-0.51.0-r2::gentoo
>>> Installing (52 of 59) dev-util/intltool-0.51.0-r2::gentoo
>>> Emerging (53 of 59) app-editors/nano-2.8.7::gentoo
>>> Emerging (54 of 59) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (49 of 59) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (50 of 59) sys-apps/gawk-4.1.4::gentoo
>>> Installing (53 of 59) app-editors/nano-2.8.7::gentoo
>>> Installing (54 of 59) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (55 of 59) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (56 of 59) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (56 of 59) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (57 of 59) dev-libs/glib-2.52.3::gentoo
>>> Installing (57 of 59) dev-libs/glib-2.52.3::gentoo
>>> Installing (55 of 59) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (58 of 59) x11-misc/shared-mime-info-1.9::gentoo
>>> Installing (58 of 59) x11-misc/shared-mime-info-1.9::gentoo
>>> Emerging (59 of 59) sys-apps/openrc-0.34.11::gentoo
>>> Installing (59 of 59) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/glibc-2.25-r10:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/busybox-1.28.0:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.28.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-fs/eudev-3.2.5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* You need to restart eudev as soon as possible to make the
* upgrade go into effect:
* /etc/init.d/udev --nodeps restart
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/makedev sys-apps/sed app-arch/bzip2 net-misc/rsync sys-apps/less sys-devel/automake sys-apps/coreutils sys-devel/flex sys-apps/file sys-apps/grep app-shells/bash:0 sys-devel/libtool sys-devel/binutils virtual/libc virtual/editor sys-devel/gcc sys-devel/bison sys-apps/findutils sys-apps/gawk sys-apps/which app-arch/gzip sys-apps/net-tools sys-devel/patch app-arch/xz-utils virtual/pkgconfig net-misc/wget sys-devel/make app-arch/tar sys-apps/baselayout virtual/shadow sys-apps/portage sys-apps/diffutils virtual/os-headers sys-devel/gettext sys-devel/autoconf sys-devel/gnuconfig
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.10::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/automake-1.15.1-r1::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
17 Feb 2018 00:55:46 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
17 Feb 2018 00:55:46 UTC: ERROR : CatalystError: Stage build aborting due to error.
17 Feb 2018 00:55:46 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
17 Feb 2018 00:55:46 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
11855.56user 2676.23system 1:33:33elapsed 258%CPU (0avgtext+0avgdata 2418944maxresident)k
449688inputs+21008128outputs (12major+399315513minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180216T214502Z.69ZQzg/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-02-15 0:55 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-02-15 0:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (22 of 59) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (24 of 59) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (23 of 59) net-misc/iputils-20171016_pre::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (25 of 59) dev-libs/expat-2.2.5::gentoo
>>> Installing (25 of 59) dev-libs/expat-2.2.5::gentoo
>>> Emerging (26 of 59) sys-libs/readline-7.0_p3::gentoo
>>> Installing (26 of 59) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (27 of 59) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (28 of 59) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (29 of 59) sys-apps/kmod-24::gentoo
>>> Emerging (30 of 59) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (31 of 59) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (32 of 59) net-misc/rsync-3.1.3::gentoo
>>> Emerging (33 of 59) app-misc/pax-utils-1.2.2-r2::gentoo
>>> Installing (27 of 59) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (29 of 59) sys-apps/kmod-24::gentoo
>>> Installing (28 of 59) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (30 of 59) sys-apps/kbd-2.0.4::gentoo
>>> Installing (31 of 59) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (33 of 59) app-misc/pax-utils-1.2.2-r2::gentoo
>>> Installing (32 of 59) net-misc/rsync-3.1.3::gentoo
>>> Emerging (34 of 59) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (35 of 59) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (35 of 59) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (34 of 59) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (36 of 59) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (36 of 59) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (37 of 59) app-shells/bash-4.4_p12::gentoo
>>> Installing (37 of 59) app-shells/bash-4.4_p12::gentoo
>>> Emerging (38 of 59) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (39 of 59) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (39 of 59) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (38 of 59) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (40 of 59) sys-apps/sandbox-2.12::gentoo
>>> Installing (40 of 59) sys-apps/sandbox-2.12::gentoo
>>> Emerging (41 of 59) sys-apps/less-529::gentoo
>>> Emerging (42 of 59) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (41 of 59) sys-apps/less-529::gentoo
>>> Installing (42 of 59) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (43 of 59) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (43 of 59) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (44 of 59) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (44 of 59) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (45 of 59) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (45 of 59) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (46 of 59) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (46 of 59) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (47 of 59) sys-devel/gcc-6.4.0-r1::gentoo
>>> Installing (47 of 59) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (48 of 59) app-arch/tar-1.29-r3::gentoo
>>> Installing (48 of 59) app-arch/tar-1.29-r3::gentoo
>>> Emerging (49 of 59) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (50 of 59) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (51 of 59) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (51 of 59) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (52 of 59) dev-util/intltool-0.51.0-r2::gentoo
>>> Installing (52 of 59) dev-util/intltool-0.51.0-r2::gentoo
>>> Emerging (53 of 59) app-editors/nano-2.8.7::gentoo
>>> Emerging (54 of 59) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (49 of 59) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (50 of 59) sys-apps/gawk-4.1.4::gentoo
>>> Installing (53 of 59) app-editors/nano-2.8.7::gentoo
>>> Installing (54 of 59) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (55 of 59) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (56 of 59) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (56 of 59) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (57 of 59) dev-libs/glib-2.52.3::gentoo
>>> Installing (57 of 59) dev-libs/glib-2.52.3::gentoo
>>> Installing (55 of 59) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (58 of 59) x11-misc/shared-mime-info-1.9::gentoo
>>> Installing (58 of 59) x11-misc/shared-mime-info-1.9::gentoo
>>> Emerging (59 of 59) sys-apps/openrc-0.34.11::gentoo
>>> Installing (59 of 59) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/glibc-2.25-r10:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/busybox-1.28.0:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.28.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-fs/eudev-3.2.5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* You need to restart eudev as soon as possible to make the
* upgrade go into effect:
* /etc/init.d/udev --nodeps restart
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/automake virtual/pkgconfig sys-apps/which sys-apps/gawk virtual/libc net-misc/rsync app-arch/gzip app-arch/bzip2 sys-apps/makedev virtual/shadow net-misc/wget sys-apps/file sys-apps/baselayout app-shells/bash:0 sys-devel/gettext app-arch/tar sys-apps/diffutils sys-devel/autoconf virtual/editor sys-devel/flex sys-devel/binutils sys-devel/patch sys-devel/make virtual/os-headers sys-devel/gnuconfig sys-apps/coreutils sys-apps/sed sys-apps/less sys-apps/portage sys-apps/findutils sys-devel/gcc sys-devel/bison sys-devel/libtool app-arch/xz-utils sys-apps/grep sys-apps/net-tools
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.10::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
15 Feb 2018 00:55:22 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
15 Feb 2018 00:55:22 UTC: ERROR : CatalystError: Stage build aborting due to error.
15 Feb 2018 00:55:22 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
15 Feb 2018 00:55:22 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
11862.11user 2673.09system 1:33:58elapsed 257%CPU (0avgtext+0avgdata 2419072maxresident)k
13576inputs+21005880outputs (17major+400066350minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180214T214501Z.Mouxqf/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-02-13 0:55 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-02-13 0:55 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (23 of 58) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (22 of 58) net-misc/iputils-20171016_pre::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (24 of 58) dev-libs/expat-2.2.5::gentoo
>>> Installing (24 of 58) dev-libs/expat-2.2.5::gentoo
>>> Emerging (25 of 58) sys-libs/readline-7.0_p3::gentoo
>>> Installing (25 of 58) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (26 of 58) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (27 of 58) sys-apps/kmod-24::gentoo
>>> Emerging (28 of 58) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (29 of 58) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (30 of 58) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (31 of 58) net-misc/rsync-3.1.3::gentoo
>>> Emerging (32 of 58) app-misc/pax-utils-1.2.2-r2::gentoo
>>> Installing (27 of 58) sys-apps/kmod-24::gentoo
>>> Installing (26 of 58) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (28 of 58) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (29 of 58) sys-apps/kbd-2.0.4::gentoo
>>> Installing (30 of 58) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (32 of 58) app-misc/pax-utils-1.2.2-r2::gentoo
>>> Installing (31 of 58) net-misc/rsync-3.1.3::gentoo
>>> Emerging (33 of 58) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (34 of 58) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (34 of 58) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (33 of 58) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (35 of 58) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (35 of 58) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (36 of 58) app-shells/bash-4.4_p12::gentoo
>>> Installing (36 of 58) app-shells/bash-4.4_p12::gentoo
>>> Emerging (37 of 58) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (38 of 58) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (38 of 58) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (37 of 58) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (39 of 58) sys-apps/sandbox-2.12::gentoo
>>> Installing (39 of 58) sys-apps/sandbox-2.12::gentoo
>>> Emerging (40 of 58) sys-apps/less-529::gentoo
>>> Emerging (41 of 58) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (40 of 58) sys-apps/less-529::gentoo
>>> Installing (41 of 58) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (42 of 58) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (42 of 58) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (43 of 58) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (43 of 58) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (44 of 58) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (44 of 58) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (45 of 58) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (45 of 58) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (46 of 58) app-arch/tar-1.29-r3::gentoo
>>> Installing (46 of 58) app-arch/tar-1.29-r3::gentoo
>>> Emerging (47 of 58) sys-devel/gcc-6.4.0-r1::gentoo
>>> Installing (47 of 58) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (48 of 58) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (49 of 58) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (50 of 58) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (50 of 58) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (51 of 58) dev-util/intltool-0.51.0-r2::gentoo
>>> Installing (51 of 58) dev-util/intltool-0.51.0-r2::gentoo
>>> Emerging (52 of 58) app-editors/nano-2.8.7::gentoo
>>> Emerging (53 of 58) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (48 of 58) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (49 of 58) sys-apps/gawk-4.1.4::gentoo
>>> Installing (52 of 58) app-editors/nano-2.8.7::gentoo
>>> Installing (53 of 58) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (54 of 58) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (55 of 58) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (55 of 58) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (56 of 58) dev-libs/glib-2.52.3::gentoo
>>> Installing (56 of 58) dev-libs/glib-2.52.3::gentoo
>>> Installing (54 of 58) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (57 of 58) x11-misc/shared-mime-info-1.9::gentoo
>>> Installing (57 of 58) x11-misc/shared-mime-info-1.9::gentoo
>>> Emerging (58 of 58) sys-apps/openrc-0.34.11::gentoo
>>> Installing (58 of 58) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/glibc-2.25-r10:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-apps/busybox-1.28.0:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.28.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-fs/eudev-3.2.5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* You need to restart eudev as soon as possible to make the
* upgrade go into effect:
* /etc/init.d/udev --nodeps restart
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/make sys-devel/bison virtual/pkgconfig app-arch/xz-utils sys-apps/findutils net-misc/rsync virtual/editor sys-apps/diffutils sys-apps/sed sys-devel/gcc app-arch/bzip2 sys-devel/autoconf sys-devel/libtool sys-apps/gawk sys-devel/gnuconfig sys-apps/baselayout virtual/libc sys-apps/net-tools sys-devel/flex app-arch/gzip sys-apps/makedev app-shells/bash:0 sys-devel/binutils sys-devel/automake sys-apps/file net-misc/wget virtual/os-headers sys-devel/gettext app-arch/tar sys-apps/less virtual/shadow sys-devel/patch sys-apps/coreutils sys-apps/which sys-apps/grep sys-apps/portage
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.10::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary])
(dependency required by "sys-devel/automake-1.15.1-r1::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
13 Feb 2018 00:55:40 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
13 Feb 2018 00:55:40 UTC: ERROR : CatalystError: Stage build aborting due to error.
13 Feb 2018 00:55:40 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
13 Feb 2018 00:55:40 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
11821.78user 2654.62system 1:34:22elapsed 255%CPU (0avgtext+0avgdata 2419504maxresident)k
469632inputs+20957408outputs (10major+394326997minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180212T214502Z.6bKdf0/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-02-10 0:34 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-02-10 0:34 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (20 of 57) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (21 of 57) net-misc/iputils-20171016_pre::gentoo
>>> Installing (19 of 57) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Emerging (22 of 57) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (22 of 57) sys-devel/autoconf-2.69-r4::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (23 of 57) dev-libs/expat-2.2.5::gentoo
>>> Installing (21 of 57) net-misc/iputils-20171016_pre::gentoo
>>> Installing (23 of 57) dev-libs/expat-2.2.5::gentoo
>>> Installing (20 of 57) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (24 of 57) sys-libs/readline-7.0_p3::gentoo
>>> Installing (24 of 57) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (25 of 57) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (26 of 57) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (27 of 57) sys-apps/kmod-24::gentoo
>>> Emerging (28 of 57) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (29 of 57) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (30 of 57) net-misc/rsync-3.1.3::gentoo
>>> Emerging (31 of 57) app-misc/pax-utils-1.2.2-r2::gentoo
>>> Installing (25 of 57) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (27 of 57) sys-apps/kmod-24::gentoo
>>> Installing (26 of 57) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (28 of 57) sys-apps/kbd-2.0.4::gentoo
>>> Installing (29 of 57) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (31 of 57) app-misc/pax-utils-1.2.2-r2::gentoo
>>> Installing (30 of 57) net-misc/rsync-3.1.3::gentoo
>>> Emerging (32 of 57) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (33 of 57) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (33 of 57) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (32 of 57) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (34 of 57) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (34 of 57) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (35 of 57) app-shells/bash-4.4_p12::gentoo
>>> Installing (35 of 57) app-shells/bash-4.4_p12::gentoo
>>> Emerging (36 of 57) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (37 of 57) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (37 of 57) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (36 of 57) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (38 of 57) sys-apps/sandbox-2.12::gentoo
>>> Installing (38 of 57) sys-apps/sandbox-2.12::gentoo
>>> Emerging (39 of 57) sys-apps/less-529::gentoo
>>> Emerging (40 of 57) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (39 of 57) sys-apps/less-529::gentoo
>>> Installing (40 of 57) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (41 of 57) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (41 of 57) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (42 of 57) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (42 of 57) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (43 of 57) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (43 of 57) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (44 of 57) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (44 of 57) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (45 of 57) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (46 of 57) app-arch/tar-1.29-r3::gentoo
>>> Installing (46 of 57) app-arch/tar-1.29-r3::gentoo
>>> Installing (45 of 57) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (47 of 57) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (48 of 57) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (49 of 57) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (49 of 57) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (50 of 57) dev-util/intltool-0.51.0-r2::gentoo
>>> Installing (50 of 57) dev-util/intltool-0.51.0-r2::gentoo
>>> Emerging (51 of 57) app-editors/nano-2.8.7::gentoo
>>> Emerging (52 of 57) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (47 of 57) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (48 of 57) sys-apps/gawk-4.1.4::gentoo
>>> Installing (51 of 57) app-editors/nano-2.8.7::gentoo
>>> Installing (52 of 57) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (53 of 57) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (54 of 57) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (54 of 57) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (55 of 57) dev-libs/glib-2.52.3::gentoo
>>> Installing (55 of 57) dev-libs/glib-2.52.3::gentoo
>>> Installing (53 of 57) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (56 of 57) x11-misc/shared-mime-info-1.9::gentoo
>>> Installing (56 of 57) x11-misc/shared-mime-info-1.9::gentoo
>>> Emerging (57 of 57) sys-apps/openrc-0.34.11::gentoo
>>> Installing (57 of 57) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/busybox-1.28.0:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.28.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-fs/eudev-3.2.5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* You need to restart eudev as soon as possible to make the
* upgrade go into effect:
* /etc/init.d/udev --nodeps restart
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget app-arch/tar sys-apps/coreutils net-misc/rsync sys-apps/which sys-apps/grep sys-devel/bison sys-devel/autoconf sys-apps/findutils sys-apps/sed sys-apps/less sys-devel/gnuconfig sys-devel/libtool virtual/os-headers app-arch/xz-utils sys-devel/gettext sys-apps/diffutils sys-apps/file sys-devel/patch app-arch/gzip sys-devel/automake sys-apps/gawk app-shells/bash:0 virtual/pkgconfig virtual/package-manager app-arch/bzip2 sys-apps/makedev virtual/editor sys-apps/baselayout sys-devel/binutils sys-devel/gcc sys-devel/flex sys-devel/make virtual/libc sys-apps/net-tools virtual/shadow
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.10::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
10 Feb 2018 00:34:51 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
10 Feb 2018 00:34:52 UTC: ERROR : CatalystError: Stage build aborting due to error.
10 Feb 2018 00:34:52 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
10 Feb 2018 00:34:52 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
10701.66user 2314.09system 1:22:10elapsed 263%CPU (0avgtext+0avgdata 2419232maxresident)k
4400inputs+18369280outputs (7major+347176188minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180209T214502Z.1tEhjp/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-02-03 0:32 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-02-03 0:32 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (16 of 54) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (16 of 54) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (17 of 54) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (18 of 54) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (17 of 54) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Installing (18 of 54) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (19 of 54) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (20 of 54) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (19 of 54) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (21 of 54) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (22 of 54) net-misc/iputils-20171016_pre::gentoo
>>> Installing (20 of 54) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Emerging (23 of 54) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (23 of 54) sys-devel/autoconf-2.69-r4::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (24 of 54) dev-libs/expat-2.2.5::gentoo
>>> Installing (22 of 54) net-misc/iputils-20171016_pre::gentoo
>>> Installing (24 of 54) dev-libs/expat-2.2.5::gentoo
>>> Installing (21 of 54) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (25 of 54) sys-libs/readline-7.0_p3::gentoo
>>> Installing (25 of 54) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (26 of 54) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (27 of 54) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (28 of 54) sys-apps/kmod-24::gentoo
>>> Emerging (29 of 54) net-misc/rsync-3.1.2-r2::gentoo
>>> Emerging (30 of 54) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (31 of 54) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (32 of 54) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (33 of 54) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (26 of 54) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (28 of 54) sys-apps/kmod-24::gentoo
>>> Installing (27 of 54) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (30 of 54) sys-apps/kbd-2.0.4::gentoo
>>> Installing (29 of 54) net-misc/rsync-3.1.2-r2::gentoo
>>> Installing (31 of 54) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (33 of 54) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (32 of 54) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (34 of 54) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (34 of 54) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (35 of 54) app-shells/bash-4.4_p12::gentoo
>>> Installing (35 of 54) app-shells/bash-4.4_p12::gentoo
>>> Emerging (36 of 54) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (37 of 54) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (37 of 54) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (36 of 54) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (38 of 54) sys-apps/less-529::gentoo
>>> Emerging (39 of 54) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (38 of 54) sys-apps/less-529::gentoo
>>> Installing (39 of 54) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (40 of 54) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (40 of 54) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (41 of 54) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (41 of 54) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (42 of 54) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (42 of 54) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (43 of 54) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (43 of 54) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (44 of 54) app-arch/tar-1.29-r3::gentoo
>>> Installing (44 of 54) app-arch/tar-1.29-r3::gentoo
>>> Emerging (45 of 54) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (46 of 54) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (47 of 54) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (48 of 54) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (48 of 54) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (49 of 54) app-editors/nano-2.8.7::gentoo
>>> Emerging (50 of 54) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (46 of 54) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (47 of 54) sys-apps/gawk-4.1.4::gentoo
>>> Installing (49 of 54) app-editors/nano-2.8.7::gentoo
>>> Installing (50 of 54) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (45 of 54) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (51 of 54) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (52 of 54) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (52 of 54) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (53 of 54) dev-libs/glib-2.52.3::gentoo
>>> Installing (53 of 54) dev-libs/glib-2.52.3::gentoo
>>> Installing (51 of 54) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (54 of 54) sys-apps/openrc-0.34.11::gentoo
>>> Installing (54 of 54) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/busybox-1.28.0:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.28.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-fs/eudev-3.2.5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* You need to restart eudev as soon as possible to make the
* upgrade go into effect:
* /etc/init.d/udev --nodeps restart
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/bison app-arch/gzip sys-apps/sed net-misc/wget net-misc/rsync sys-apps/grep app-shells/bash:0 sys-apps/diffutils sys-devel/gcc app-arch/tar sys-apps/coreutils sys-apps/findutils virtual/shadow sys-devel/libtool sys-apps/net-tools sys-devel/gettext sys-apps/baselayout sys-devel/flex app-arch/xz-utils sys-devel/gnuconfig sys-devel/binutils sys-apps/file virtual/os-headers virtual/libc sys-devel/patch sys-devel/make sys-apps/less sys-apps/which app-arch/bzip2 sys-devel/automake sys-apps/gawk virtual/editor sys-devel/autoconf virtual/pkgconfig virtual/package-manager sys-apps/makedev
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.10::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
03 Feb 2018 00:32:08 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
03 Feb 2018 00:32:08 UTC: ERROR : CatalystError: Stage build aborting due to error.
03 Feb 2018 00:32:08 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
03 Feb 2018 00:32:08 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
10634.43user 2290.77system 1:22:16elapsed 261%CPU (0avgtext+0avgdata 2419520maxresident)k
440984inputs+18277296outputs (4major+344165718minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180202T214502Z.cAWohZ/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-02-01 1:52 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-02-01 1:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (15 of 53) sys-kernel/linux-headers-4.13::gentoo
>>> Installing (15 of 53) sys-kernel/linux-headers-4.13::gentoo
>>> Emerging (16 of 53) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (16 of 53) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (17 of 53) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (18 of 53) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (17 of 53) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Installing (18 of 53) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (19 of 53) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (20 of 53) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (19 of 53) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (21 of 53) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (22 of 53) net-misc/iputils-20171016_pre::gentoo
>>> Installing (20 of 53) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Emerging (23 of 53) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (23 of 53) sys-devel/autoconf-2.69-r4::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (24 of 53) sys-libs/readline-7.0_p3::gentoo
>>> Installing (22 of 53) net-misc/iputils-20171016_pre::gentoo
>>> Installing (24 of 53) sys-libs/readline-7.0_p3::gentoo
>>> Installing (21 of 53) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (25 of 53) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (26 of 53) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (27 of 53) sys-apps/kmod-24::gentoo
>>> Emerging (28 of 53) net-misc/rsync-3.1.2-r2::gentoo
>>> Emerging (29 of 53) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (30 of 53) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (31 of 53) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (32 of 53) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (25 of 53) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (27 of 53) sys-apps/kmod-24::gentoo
>>> Installing (26 of 53) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (29 of 53) sys-apps/kbd-2.0.4::gentoo
>>> Installing (28 of 53) net-misc/rsync-3.1.2-r2::gentoo
>>> Installing (30 of 53) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (32 of 53) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (31 of 53) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (33 of 53) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (33 of 53) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (34 of 53) app-shells/bash-4.4_p12::gentoo
>>> Installing (34 of 53) app-shells/bash-4.4_p12::gentoo
>>> Emerging (35 of 53) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (36 of 53) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (36 of 53) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (35 of 53) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (37 of 53) sys-apps/less-529::gentoo
>>> Emerging (38 of 53) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (37 of 53) sys-apps/less-529::gentoo
>>> Installing (38 of 53) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (39 of 53) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (39 of 53) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (40 of 53) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (40 of 53) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (41 of 53) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (41 of 53) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (42 of 53) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (42 of 53) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (43 of 53) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (44 of 53) app-arch/tar-1.29-r3::gentoo
>>> Installing (44 of 53) app-arch/tar-1.29-r3::gentoo
>>> Installing (43 of 53) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (45 of 53) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (46 of 53) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (47 of 53) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (47 of 53) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (48 of 53) app-editors/nano-2.8.7::gentoo
>>> Emerging (49 of 53) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (45 of 53) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (46 of 53) sys-apps/gawk-4.1.4::gentoo
>>> Installing (48 of 53) app-editors/nano-2.8.7::gentoo
>>> Installing (49 of 53) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (50 of 53) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (51 of 53) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (51 of 53) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (52 of 53) dev-libs/glib-2.52.3::gentoo
>>> Installing (52 of 53) dev-libs/glib-2.52.3::gentoo
>>> Installing (50 of 53) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (53 of 53) sys-apps/openrc-0.34.11::gentoo
>>> Installing (53 of 53) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/busybox-1.28.0:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.28.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-fs/eudev-3.2.5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* You need to restart eudev as soon as possible to make the
* upgrade go into effect:
* /etc/init.d/udev --nodeps restart
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/findutils sys-devel/gcc net-misc/wget sys-apps/baselayout sys-apps/grep sys-apps/net-tools sys-apps/makedev sys-apps/sed virtual/pkgconfig virtual/libc sys-devel/patch app-shells/bash:0 app-arch/gzip sys-devel/bison virtual/shadow app-arch/xz-utils sys-apps/which app-arch/bzip2 virtual/os-headers virtual/editor sys-devel/gnuconfig sys-devel/binutils sys-devel/flex sys-apps/gawk app-arch/tar sys-devel/gettext sys-devel/automake sys-apps/file sys-devel/make sys-devel/autoconf sys-devel/libtool sys-apps/diffutils sys-apps/less net-misc/rsync sys-apps/coreutils virtual/package-manager
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.9-r2::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/automake-1.15.1-r1::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
01 Feb 2018 01:52:23 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
01 Feb 2018 01:52:23 UTC: ERROR : CatalystError: Stage build aborting due to error.
01 Feb 2018 01:52:23 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
01 Feb 2018 01:52:23 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
10599.94user 2266.49system 1:20:43elapsed 265%CPU (0avgtext+0avgdata 2419536maxresident)k
29208inputs+18201896outputs (1major+341358689minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180131T214502Z.7dEJYM/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-01-31 6:44 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-01-31 6:44 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
>>> Emerging (11 of 49) sys-auth/pambase-20150213-r1::gentoo
>>> Installing (11 of 49) sys-auth/pambase-20150213-r1::gentoo
>>> Emerging (12 of 49) virtual/dev-manager-0-r1::gentoo
>>> Installing (12 of 49) virtual/dev-manager-0-r1::gentoo
>>> Emerging (13 of 49) sys-apps/man-pages-4.13::gentoo
>>> Installing (13 of 49) sys-apps/man-pages-4.13::gentoo
>>> Emerging (14 of 49) sys-kernel/linux-headers-4.13::gentoo
>>> Installing (14 of 49) sys-kernel/linux-headers-4.13::gentoo
>>> Emerging (15 of 49) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (15 of 49) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (16 of 49) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (16 of 49) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (17 of 49) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Installing (17 of 49) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (18 of 49) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (18 of 49) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (19 of 49) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Installing (19 of 49) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (20 of 49) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (20 of 49) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Emerging (21 of 49) net-misc/iputils-20171016_pre::gentoo
>>> Installing (21 of 49) net-misc/iputils-20171016_pre::gentoo
>>> Emerging (22 of 49) sys-apps/busybox-1.28.0::gentoo
>>> Installing (22 of 49) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (23 of 49) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (23 of 49) sys-devel/autoconf-2.69-r4::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (24 of 49) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (24 of 49) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (25 of 49) sys-devel/gcc-6.4.0-r1::gentoo
>>> Installing (25 of 49) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (26 of 49) app-arch/tar-1.29-r3::gentoo
>>> Installing (26 of 49) app-arch/tar-1.29-r3::gentoo
>>> Emerging (27 of 49) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (27 of 49) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (28 of 49) sys-libs/readline-7.0_p3::gentoo
>>> Installing (28 of 49) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (29 of 49) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (29 of 49) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (30 of 49) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (30 of 49) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (31 of 49) sys-apps/kmod-24::gentoo
>>> Installing (31 of 49) sys-apps/kmod-24::gentoo
>>> Emerging (32 of 49) net-misc/rsync-3.1.2-r2::gentoo
>>> Installing (32 of 49) net-misc/rsync-3.1.2-r2::gentoo
>>> Emerging (33 of 49) sys-apps/kbd-2.0.4::gentoo
>>> Installing (33 of 49) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (34 of 49) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (34 of 49) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (35 of 49) app-editors/nano-2.8.7::gentoo
>>> Installing (35 of 49) app-editors/nano-2.8.7::gentoo
>>> Emerging (36 of 49) net-misc/openssh-7.5_p1-r4::gentoo
>>> Installing (36 of 49) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (37 of 49) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (37 of 49) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (38 of 49) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (38 of 49) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (39 of 49) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (39 of 49) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (40 of 49) app-shells/bash-4.4_p12::gentoo
>>> Installing (40 of 49) app-shells/bash-4.4_p12::gentoo
>>> Emerging (41 of 49) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Installing (41 of 49) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (42 of 49) sys-apps/gawk-4.1.4::gentoo
>>> Installing (42 of 49) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (43 of 49) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (43 of 49) dev-libs/libxml2-2.9.7::gentoo
>>> Emerging (44 of 49) sys-fs/eudev-3.2.5::gentoo
>>> Installing (44 of 49) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (45 of 49) sys-apps/less-529::gentoo
>>> Installing (45 of 49) sys-apps/less-529::gentoo
>>> Emerging (46 of 49) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (46 of 49) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (47 of 49) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (47 of 49) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (48 of 49) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (48 of 49) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (49 of 49) dev-libs/glib-2.52.3::gentoo
>>> Installing (49 of 49) dev-libs/glib-2.52.3::gentoo
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/busybox-1.28.0:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.28.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-fs/eudev-3.2.5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* You need to restart eudev as soon as possible to make the
* upgrade go into effect:
* /etc/init.d/udev --nodeps restart
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/diffutils net-misc/rsync sys-devel/gnuconfig sys-apps/coreutils virtual/os-headers virtual/editor sys-devel/automake sys-devel/gettext app-shells/bash:0 sys-devel/make sys-apps/findutils net-misc/wget sys-devel/flex sys-devel/libtool sys-devel/binutils sys-apps/which sys-devel/patch sys-apps/sed app-arch/xz-utils app-arch/bzip2 sys-apps/gawk sys-apps/file sys-apps/net-tools virtual/shadow sys-devel/bison app-arch/gzip virtual/pkgconfig sys-apps/grep sys-devel/autoconf virtual/package-manager sys-apps/less virtual/libc sys-apps/baselayout sys-apps/makedev app-arch/tar sys-devel/gcc
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.9-r2::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
31 Jan 2018 06:44:58 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
31 Jan 2018 06:44:58 UTC: ERROR : CatalystError: Stage build aborting due to error.
31 Jan 2018 06:44:58 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
31 Jan 2018 06:44:58 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
6305.80user 759.04system 1:05:24elapsed 180%CPU (0avgtext+0avgdata 604616maxresident)k
62712inputs+16772224outputs (149major+323414788minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180131T042040Z.xelFr2/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-01-31 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-01-31 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
*** Running command: time catalyst -a -c /etc/catalyst/release/x86-auto.conf -f i686/stage1.spec
31 Jan 2018 03:00:57 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
31 Jan 2018 03:00:57 UTC: NOTICE : conf_values[options] = {'pkgcache', 'clear-autoresume', 'bindist', 'preserve_libs'}
31 Jan 2018 03:00:57 UTC: NOTICE : Processing spec file: i686/stage1.spec
31 Jan 2018 03:00:57 UTC: NOTICE : Using target: stage1
31 Jan 2018 03:00:57 UTC: NOTICE : Source file specification matching setting is: loose
31 Jan 2018 03:00:57 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
31 Jan 2018 03:00:58 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
31 Jan 2018 03:00:58 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180131T030003Z/tmp/stage1root
31 Jan 2018 03:00:58 UTC: NOTICE : --- Running action sequence: unpack
31 Jan 2018 03:00:58 UTC: NOTICE : Clearing the chroot path ...
31 Jan 2018 03:00:58 UTC: NOTICE : Emptying directory: /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180131T030003Z
31 Jan 2018 03:00:58 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
31 Jan 2018 03:00:58 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180131T030003Z (this may take some time) ..
31 Jan 2018 03:01:01 UTC: NOTICE : --- Running action sequence: unpack_snapshot
31 Jan 2018 03:01:01 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
31 Jan 2018 03:01:17 UTC: NOTICE : --- Running action sequence: setup_confdir
31 Jan 2018 03:01:17 UTC: NOTICE : --- Running action sequence: portage_overlay
31 Jan 2018 03:01:17 UTC: NOTICE : --- Running action sequence: base_dirs
31 Jan 2018 03:01:17 UTC: NOTICE : --- Running action sequence: bind
31 Jan 2018 03:01:17 UTC: NOTICE : --- Running action sequence: chroot_setup
31 Jan 2018 03:01:17 UTC: NOTICE : Setting up chroot...
31 Jan 2018 03:01:17 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
31 Jan 2018 03:01:17 UTC: WARNING : If your build fails look here first as the possible problem.
31 Jan 2018 03:01:17 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
31 Jan 2018 03:01:17 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
31 Jan 2018 03:01:17 UTC: WARNING : You have been warned.
31 Jan 2018 03:01:18 UTC: NOTICE : Writing the stage make.conf to: /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180131T030003Z/etc/portage/make.conf
31 Jan 2018 03:01:18 UTC: NOTICE : STICKY-CONFIG is enabled
31 Jan 2018 03:01:18 UTC: NOTICE : --- Running action sequence: setup_environment
31 Jan 2018 03:01:18 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180131T030003Z/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180131T030003Z/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180131T030003Z/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20180131T030003Z /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
[ebuild N ] app-crypt/gentoo-keys-201607021514
[ebuild N ] dev-libs/libunistring-0.9.7
[ebuild N ] dev-libs/npth-1.3
[ebuild N ] app-eselect/eselect-lib-bin-symlink-0.1.1
[ebuild N ] app-eselect/eselect-pinentry-0.7
[ebuild N ] dev-libs/libassuan-2.5.1
[ebuild N ] dev-libs/libksba-1.3.5-r1
[ebuild N ] dev-python/bz2file-0.98
[ebuild N ] dev-libs/libtasn1-4.12-r1
[ebuild N ] net-dns/libidn2-2.0.4
[ebuild N ] dev-libs/nettle-3.3-r2
[ebuild N ] net-libs/gnutls-3.5.15
[ebuild N ] net-misc/curl-7.57.0
[ebuild N ] app-crypt/pinentry-1.0.0-r2
[ebuild N ] app-crypt/gnupg-2.2.4-r1
[ebuild N ] app-portage/gemato-10.3
[ebuild U ] sys-apps/portage-2.3.21 [2.3.13-r1]
The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by app-portage/gemato-10.3::gentoo[-python_targets_pypy,python_targets_python2_7,bzip2]
# required by sys-apps/portage-2.3.21::gentoo[rsync-verify]
# required by sys-apps/portage (argument)
=dev-python/bz2file-0.98 ~x86
# required by sys-apps/portage-2.3.21::gentoo[rsync-verify]
# required by sys-apps/portage (argument)
=app-portage/gemato-10.3 ~x86
# required by sys-apps/portage-2.3.21::gentoo[rsync-verify]
# required by sys-apps/portage (argument)
=app-crypt/gnupg-2.2.4-r1 ~x86
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
31 Jan 2018 03:01:25 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
31 Jan 2018 03:01:26 UTC: ERROR : CatalystError: Stage build aborting due to error.
31 Jan 2018 03:01:26 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
31 Jan 2018 03:01:26 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
29.70user 6.34system 0:28.66elapsed 125%CPU (0avgtext+0avgdata 349364maxresident)k
928inputs+3137848outputs (0major+267084minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180131T030003Z.kRxtIz/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-01-30 0:28 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-01-30 0:28 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Emerging (15 of 53) sys-kernel/linux-headers-4.13::gentoo
>>> Installing (15 of 53) sys-kernel/linux-headers-4.13::gentoo
>>> Emerging (16 of 53) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (16 of 53) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (17 of 53) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (18 of 53) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (17 of 53) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Installing (18 of 53) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (19 of 53) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (20 of 53) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (19 of 53) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (21 of 53) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (22 of 53) net-misc/iputils-20171016_pre::gentoo
>>> Installing (20 of 53) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Emerging (23 of 53) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (23 of 53) sys-devel/autoconf-2.69-r4::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (24 of 53) sys-libs/readline-7.0_p3::gentoo
>>> Installing (22 of 53) net-misc/iputils-20171016_pre::gentoo
>>> Installing (24 of 53) sys-libs/readline-7.0_p3::gentoo
>>> Installing (21 of 53) sys-apps/busybox-1.28.0::gentoo
>>> Emerging (25 of 53) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (26 of 53) sys-apps/kmod-24::gentoo
>>> Emerging (27 of 53) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (28 of 53) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (29 of 53) net-misc/rsync-3.1.2-r2::gentoo
>>> Emerging (30 of 53) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (31 of 53) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (32 of 53) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (25 of 53) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (26 of 53) sys-apps/kmod-24::gentoo
>>> Installing (27 of 53) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (28 of 53) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (29 of 53) net-misc/rsync-3.1.2-r2::gentoo
>>> Installing (30 of 53) sys-apps/kbd-2.0.4::gentoo
>>> Installing (32 of 53) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (31 of 53) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (33 of 53) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (33 of 53) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (34 of 53) app-shells/bash-4.4_p12::gentoo
>>> Installing (34 of 53) app-shells/bash-4.4_p12::gentoo
>>> Emerging (35 of 53) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (36 of 53) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (36 of 53) dev-libs/libxml2-2.9.7::gentoo
>>> Installing (35 of 53) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (37 of 53) sys-apps/less-529::gentoo
>>> Emerging (38 of 53) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (37 of 53) sys-apps/less-529::gentoo
>>> Installing (38 of 53) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (39 of 53) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (39 of 53) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (40 of 53) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (40 of 53) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (41 of 53) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (41 of 53) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (42 of 53) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (42 of 53) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (43 of 53) app-arch/tar-1.29-r3::gentoo
>>> Installing (43 of 53) app-arch/tar-1.29-r3::gentoo
>>> Emerging (44 of 53) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (45 of 53) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (46 of 53) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (47 of 53) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (47 of 53) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (48 of 53) app-editors/nano-2.8.7::gentoo
>>> Emerging (49 of 53) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (45 of 53) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (46 of 53) sys-apps/gawk-4.1.4::gentoo
>>> Installing (48 of 53) app-editors/nano-2.8.7::gentoo
>>> Installing (49 of 53) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (44 of 53) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (50 of 53) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (51 of 53) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (51 of 53) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (52 of 53) dev-libs/glib-2.52.3::gentoo
>>> Installing (52 of 53) dev-libs/glib-2.52.3::gentoo
>>> Installing (50 of 53) sys-fs/eudev-3.2.5::gentoo
>>> Emerging (53 of 53) sys-apps/openrc-0.34.11::gentoo
>>> Installing (53 of 53) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-fs/eudev-3.2.5:
*
* As of 2013-01-29, eudev-3.2.5 provides the new interface renaming functionality,
* as described in the URL below:
* https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* This functionality is enabled BY DEFAULT because eudev has no means of synchronizing
* between the default or user-modified choice of sys-fs/udev. If you wish to disable
* this new iface naming, please be sure that /etc/udev/rules.d/80-net-name-slot.rules
* exists: touch /etc/udev/rules.d/80-net-name-slot.rules
*
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/busybox-1.28.0:
* Could not locate user configfile, so we will save a default one
* Your configuration for sys-apps/busybox-1.28.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.28.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package dev-libs/glib-2.52.3:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
* Messages for package sys-fs/eudev-3.2.5:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* You need to restart eudev as soon as possible to make the
* upgrade go into effect:
* /etc/init.d/udev --nodeps restart
*
* For more information on eudev on Gentoo, writing udev rules, and
* fixing known issues visit: https://wiki.gentoo.org/wiki/Eudev
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget app-shells/bash:0 sys-apps/coreutils sys-apps/net-tools sys-apps/diffutils sys-apps/which sys-devel/gnuconfig sys-apps/less sys-devel/flex sys-devel/patch sys-apps/grep sys-devel/binutils app-arch/gzip sys-devel/libtool sys-apps/gawk virtual/package-manager virtual/os-headers sys-apps/file sys-devel/automake virtual/shadow virtual/libc virtual/editor sys-devel/gcc sys-apps/sed sys-apps/baselayout sys-devel/make sys-devel/gettext sys-apps/makedev sys-devel/autoconf app-arch/xz-utils app-arch/bzip2 sys-devel/bison app-arch/tar virtual/pkgconfig net-misc/rsync sys-apps/findutils
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.9-r2::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/automake-1.15.1-r1::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
30 Jan 2018 00:28:47 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
30 Jan 2018 00:28:48 UTC: ERROR : CatalystError: Stage build aborting due to error.
30 Jan 2018 00:28:48 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
30 Jan 2018 00:28:48 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
10592.69user 2268.50system 1:20:58elapsed 264%CPU (0avgtext+0avgdata 2419232maxresident)k
432112inputs+18198160outputs (0major+341149428minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180129T214502Z.z2Awwb/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-01-27 0:23 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-01-27 0:23 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
emerge --quiet --buildpkg=n --update --deep @world
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-libs/libxml2-2.9.6:2/2::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for net-misc/openssh-7.5_p1-r4
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Emerging (1 of 50) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging (2 of 50) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (3 of 50) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging (4 of 50) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (5 of 50) sys-libs/timezone-data-2017c::gentoo
>>> Installing (4 of 50) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (6 of 50) sys-devel/binutils-config-5-r4::gentoo
>>> Emerging (7 of 50) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (7 of 50) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (1 of 50) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (2 of 50) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (3 of 50) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (5 of 50) sys-libs/timezone-data-2017c::gentoo
>>> Installing (6 of 50) sys-devel/binutils-config-5-r4::gentoo
>>> Emerging (8 of 50) app-admin/eselect-1.4.11::gentoo
>>> Installing (8 of 50) app-admin/eselect-1.4.11::gentoo
>>> Emerging (9 of 50) sys-apps/sandbox-2.12::gentoo
>>> Installing (9 of 50) sys-apps/sandbox-2.12::gentoo
>>> Emerging (10 of 50) sys-auth/pambase-20150213-r1::gentoo
>>> Installing (10 of 50) sys-auth/pambase-20150213-r1::gentoo
>>> Emerging (11 of 50) virtual/dev-manager-0-r1::gentoo
>>> Emerging (12 of 50) sys-apps/man-pages-4.13::gentoo
>>> Emerging (13 of 50) virtual/libelf-3::gentoo
>>> Emerging (14 of 50) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (11 of 50) virtual/dev-manager-0-r1::gentoo
>>> Installing (13 of 50) virtual/libelf-3::gentoo
>>> Installing (12 of 50) sys-apps/man-pages-4.13::gentoo
>>> Installing (14 of 50) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (15 of 50) sys-kernel/linux-headers-4.13::gentoo
>>> Installing (15 of 50) sys-kernel/linux-headers-4.13::gentoo
>>> Emerging (16 of 50) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (16 of 50) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (17 of 50) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (18 of 50) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (17 of 50) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Installing (18 of 50) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (19 of 50) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (20 of 50) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (19 of 50) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (21 of 50) net-misc/iputils-20171016_pre::gentoo
>>> Emerging (22 of 50) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (20 of 50) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (22 of 50) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (21 of 50) net-misc/iputils-20171016_pre::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (23 of 50) sys-libs/readline-7.0_p3::gentoo
>>> Installing (23 of 50) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (24 of 50) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (25 of 50) sys-apps/kmod-24::gentoo
>>> Emerging (26 of 50) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (27 of 50) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (28 of 50) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (29 of 50) net-misc/rsync-3.1.2-r2::gentoo
>>> Emerging (30 of 50) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (31 of 50) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (25 of 50) sys-apps/kmod-24::gentoo
>>> Installing (24 of 50) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (26 of 50) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (27 of 50) sys-apps/kbd-2.0.4::gentoo
>>> Installing (28 of 50) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (29 of 50) net-misc/rsync-3.1.2-r2::gentoo
>>> Installing (31 of 50) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (30 of 50) net-misc/openssh-7.5_p1-r4::gentoo
>>> Emerging (32 of 50) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (32 of 50) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (33 of 50) app-shells/bash-4.4_p12::gentoo
>>> Installing (33 of 50) app-shells/bash-4.4_p12::gentoo
>>> Emerging (34 of 50) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (35 of 50) dev-libs/libxml2-2.9.6::gentoo
>>> Installing (35 of 50) dev-libs/libxml2-2.9.6::gentoo
>>> Installing (34 of 50) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (36 of 50) sys-apps/less-529::gentoo
>>> Emerging (37 of 50) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (36 of 50) sys-apps/less-529::gentoo
>>> Installing (37 of 50) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (38 of 50) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (38 of 50) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (39 of 50) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (39 of 50) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (40 of 50) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (40 of 50) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (41 of 50) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (41 of 50) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (42 of 50) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (43 of 50) app-arch/tar-1.29-r3::gentoo
>>> Installing (43 of 50) app-arch/tar-1.29-r3::gentoo
>>> Installing (42 of 50) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (44 of 50) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (45 of 50) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (46 of 50) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (46 of 50) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (47 of 50) app-editors/nano-2.8.7::gentoo
>>> Emerging (48 of 50) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (44 of 50) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (45 of 50) sys-apps/gawk-4.1.4::gentoo
>>> Installing (47 of 50) app-editors/nano-2.8.7::gentoo
>>> Installing (48 of 50) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (49 of 50) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (49 of 50) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (50 of 50) sys-apps/openrc-0.34.11::gentoo
>>> Installing (50 of 50) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-devel/gettext sys-apps/gawk net-misc/rsync sys-apps/file sys-apps/net-tools sys-devel/make sys-devel/autoconf app-arch/bzip2 sys-devel/gnuconfig virtual/os-headers sys-devel/bison app-arch/tar virtual/pkgconfig sys-devel/patch sys-apps/makedev sys-devel/gcc app-arch/gzip sys-devel/binutils virtual/libc app-shells/bash:0 sys-apps/grep virtual/package-manager sys-apps/findutils sys-devel/libtool sys-devel/automake sys-apps/coreutils sys-apps/baselayout sys-apps/sed app-arch/xz-utils virtual/shadow sys-devel/flex sys-apps/diffutils sys-apps/which sys-apps/less virtual/editor
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.9-r2::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
27 Jan 2018 00:23:20 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
27 Jan 2018 00:23:20 UTC: ERROR : CatalystError: Stage build aborting due to error.
27 Jan 2018 00:23:20 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
27 Jan 2018 00:23:20 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
10208.39user 2115.89system 1:17:42elapsed 264%CPU (0avgtext+0avgdata 2418736maxresident)k
15960inputs+17467080outputs (3major+319657349minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180126T214503Z.lkvZ2e/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-01-25 0:21 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-01-25 0:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.6:2/2::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Emerging (1 of 49) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging (2 of 49) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (3 of 49) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging (4 of 49) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (5 of 49) sys-libs/timezone-data-2017c::gentoo
>>> Installing (4 of 49) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (6 of 49) sys-devel/binutils-config-5-r4::gentoo
>>> Emerging (7 of 49) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (7 of 49) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (1 of 49) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (2 of 49) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (3 of 49) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (5 of 49) sys-libs/timezone-data-2017c::gentoo
>>> Installing (6 of 49) sys-devel/binutils-config-5-r4::gentoo
>>> Emerging (8 of 49) app-admin/eselect-1.4.11::gentoo
>>> Installing (8 of 49) app-admin/eselect-1.4.11::gentoo
>>> Emerging (9 of 49) sys-apps/sandbox-2.12::gentoo
>>> Installing (9 of 49) sys-apps/sandbox-2.12::gentoo
>>> Emerging (10 of 49) virtual/dev-manager-0-r1::gentoo
>>> Emerging (11 of 49) sys-apps/man-pages-4.13::gentoo
>>> Emerging (12 of 49) sys-auth/pambase-20150213-r1::gentoo
>>> Installing (10 of 49) virtual/dev-manager-0-r1::gentoo
>>> Installing (12 of 49) sys-auth/pambase-20150213-r1::gentoo
>>> Installing (11 of 49) sys-apps/man-pages-4.13::gentoo
>>> Emerging (13 of 49) virtual/libelf-3::gentoo
>>> Emerging (14 of 49) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (13 of 49) virtual/libelf-3::gentoo
>>> Installing (14 of 49) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (15 of 49) sys-kernel/linux-headers-4.13::gentoo
>>> Installing (15 of 49) sys-kernel/linux-headers-4.13::gentoo
>>> Emerging (16 of 49) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (16 of 49) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (17 of 49) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (18 of 49) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (17 of 49) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Installing (18 of 49) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (19 of 49) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (20 of 49) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (19 of 49) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (21 of 49) net-misc/iputils-20171016_pre::gentoo
>>> Emerging (22 of 49) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (20 of 49) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (22 of 49) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (21 of 49) net-misc/iputils-20171016_pre::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (23 of 49) sys-libs/readline-7.0_p3::gentoo
>>> Installing (23 of 49) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (24 of 49) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (25 of 49) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (26 of 49) sys-apps/kmod-24::gentoo
>>> Emerging (27 of 49) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (28 of 49) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (29 of 49) net-misc/rsync-3.1.2-r2::gentoo
>>> Emerging (30 of 49) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (24 of 49) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (26 of 49) sys-apps/kmod-24::gentoo
>>> Installing (25 of 49) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (27 of 49) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (28 of 49) sys-apps/kbd-2.0.4::gentoo
>>> Installing (29 of 49) net-misc/rsync-3.1.2-r2::gentoo
>>> Installing (30 of 49) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (31 of 49) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (31 of 49) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (32 of 49) app-shells/bash-4.4_p12::gentoo
>>> Installing (32 of 49) app-shells/bash-4.4_p12::gentoo
>>> Emerging (33 of 49) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (34 of 49) dev-libs/libxml2-2.9.6::gentoo
>>> Installing (34 of 49) dev-libs/libxml2-2.9.6::gentoo
>>> Installing (33 of 49) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (35 of 49) sys-apps/less-529::gentoo
>>> Emerging (36 of 49) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (35 of 49) sys-apps/less-529::gentoo
>>> Installing (36 of 49) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (37 of 49) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (37 of 49) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (38 of 49) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (38 of 49) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (39 of 49) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (39 of 49) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (40 of 49) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (40 of 49) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (41 of 49) app-arch/tar-1.29-r3::gentoo
>>> Installing (41 of 49) app-arch/tar-1.29-r3::gentoo
>>> Emerging (42 of 49) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (43 of 49) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (44 of 49) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (45 of 49) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (45 of 49) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (46 of 49) app-editors/nano-2.8.7::gentoo
>>> Emerging (47 of 49) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (43 of 49) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (44 of 49) sys-apps/gawk-4.1.4::gentoo
>>> Installing (46 of 49) app-editors/nano-2.8.7::gentoo
>>> Installing (47 of 49) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (42 of 49) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (48 of 49) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (48 of 49) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (49 of 49) sys-apps/openrc-0.34.11::gentoo
>>> Installing (49 of 49) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/bison sys-devel/gettext net-misc/rsync virtual/editor sys-devel/patch sys-apps/findutils app-shells/bash:0 sys-apps/less virtual/libc sys-apps/baselayout sys-apps/file sys-apps/sed virtual/os-headers sys-devel/gnuconfig sys-apps/diffutils sys-devel/binutils sys-apps/gawk net-misc/wget sys-apps/grep sys-devel/libtool sys-devel/make sys-apps/makedev app-arch/gzip virtual/pkgconfig app-arch/bzip2 sys-apps/net-tools sys-devel/flex sys-devel/automake sys-apps/coreutils virtual/shadow virtual/package-manager sys-apps/which app-arch/xz-utils sys-devel/autoconf sys-devel/gcc app-arch/tar
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.9-r2::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
25 Jan 2018 00:21:50 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
25 Jan 2018 00:21:50 UTC: ERROR : CatalystError: Stage build aborting due to error.
25 Jan 2018 00:21:50 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
25 Jan 2018 00:21:50 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
10103.82user 2091.10system 1:17:27elapsed 262%CPU (0avgtext+0avgdata 2419088maxresident)k
16976inputs+17338816outputs (0major+312726218minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180124T214502Z.4zWLWd/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-01-24 5:03 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-01-24 5:03 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.19-r1::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.19-r1::gentoo
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
The following packages are causing rebuilds:
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/util-linux-2.30.2:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.6:2/2::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Emerging (1 of 45) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (1 of 45) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging (2 of 45) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (2 of 45) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (3 of 45) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (3 of 45) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging (4 of 45) app-text/sgml-common-0.6.3-r6::gentoo
>>> Installing (4 of 45) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (5 of 45) sys-libs/timezone-data-2017c::gentoo
>>> Installing (5 of 45) sys-libs/timezone-data-2017c::gentoo
>>> Emerging (6 of 45) sys-devel/binutils-config-5-r4::gentoo
>>> Installing (6 of 45) sys-devel/binutils-config-5-r4::gentoo
>>> Emerging (7 of 45) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (7 of 45) app-arch/unzip-6.0_p21-r2::gentoo
>>> Emerging (8 of 45) app-admin/eselect-1.4.11::gentoo
>>> Installing (8 of 45) app-admin/eselect-1.4.11::gentoo
>>> Emerging (9 of 45) virtual/libelf-3::gentoo
>>> Installing (9 of 45) virtual/libelf-3::gentoo
>>> Emerging (10 of 45) sys-apps/sandbox-2.12::gentoo
>>> Installing (10 of 45) sys-apps/sandbox-2.12::gentoo
>>> Emerging (11 of 45) virtual/dev-manager-0-r1::gentoo
>>> Installing (11 of 45) virtual/dev-manager-0-r1::gentoo
>>> Emerging (12 of 45) sys-apps/man-pages-4.13::gentoo
>>> Installing (12 of 45) sys-apps/man-pages-4.13::gentoo
>>> Emerging (13 of 45) sys-auth/pambase-20150213-r1::gentoo
>>> Installing (13 of 45) sys-auth/pambase-20150213-r1::gentoo
>>> Emerging (14 of 45) sys-kernel/linux-headers-4.13::gentoo
>>> Installing (14 of 45) sys-kernel/linux-headers-4.13::gentoo
>>> Emerging (15 of 45) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (15 of 45) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (16 of 45) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (16 of 45) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (17 of 45) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Installing (17 of 45) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (18 of 45) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (18 of 45) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (19 of 45) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Installing (19 of 45) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (20 of 45) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (20 of 45) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Emerging (21 of 45) net-misc/iputils-20171016_pre::gentoo
>>> Installing (21 of 45) net-misc/iputils-20171016_pre::gentoo
>>> Emerging (22 of 45) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (22 of 45) sys-devel/autoconf-2.69-r4::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (23 of 45) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (23 of 45) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (24 of 45) sys-devel/gcc-6.4.0-r1::gentoo
>>> Installing (24 of 45) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (25 of 45) app-arch/tar-1.29-r3::gentoo
>>> Installing (25 of 45) app-arch/tar-1.29-r3::gentoo
>>> Emerging (26 of 45) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (26 of 45) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (27 of 45) sys-libs/readline-7.0_p3::gentoo
>>> Installing (27 of 45) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (28 of 45) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (28 of 45) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (29 of 45) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (29 of 45) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (30 of 45) sys-apps/kmod-24::gentoo
>>> Installing (30 of 45) sys-apps/kmod-24::gentoo
>>> Emerging (31 of 45) net-misc/rsync-3.1.2-r2::gentoo
>>> Installing (31 of 45) net-misc/rsync-3.1.2-r2::gentoo
>>> Emerging (32 of 45) sys-apps/kbd-2.0.4::gentoo
>>> Installing (32 of 45) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (33 of 45) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (33 of 45) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (34 of 45) app-editors/nano-2.8.7::gentoo
>>> Installing (34 of 45) app-editors/nano-2.8.7::gentoo
>>> Emerging (35 of 45) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (35 of 45) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (36 of 45) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (36 of 45) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (37 of 45) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (37 of 45) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (38 of 45) app-shells/bash-4.4_p12::gentoo
>>> Installing (38 of 45) app-shells/bash-4.4_p12::gentoo
>>> Emerging (39 of 45) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Installing (39 of 45) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (40 of 45) sys-apps/gawk-4.1.4::gentoo
>>> Installing (40 of 45) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (41 of 45) dev-libs/libxml2-2.9.6::gentoo
>>> Installing (41 of 45) dev-libs/libxml2-2.9.6::gentoo
>>> Emerging (42 of 45) sys-apps/less-529::gentoo
>>> Installing (42 of 45) sys-apps/less-529::gentoo
>>> Emerging (43 of 45) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (43 of 45) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (44 of 45) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (44 of 45) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (45 of 45) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (45 of 45) dev-libs/libxslt-1.1.30-r2::gentoo
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/libtool sys-apps/baselayout sys-apps/findutils virtual/pkgconfig net-misc/rsync sys-devel/make app-arch/xz-utils app-arch/gzip sys-apps/coreutils app-arch/bzip2 sys-apps/which virtual/libc sys-apps/grep virtual/package-manager sys-devel/gettext virtual/os-headers sys-devel/patch sys-devel/flex sys-devel/gcc sys-devel/binutils virtual/shadow sys-apps/sed sys-apps/diffutils sys-devel/gnuconfig sys-devel/automake sys-apps/file sys-apps/gawk app-arch/tar net-misc/wget sys-devel/bison sys-devel/autoconf sys-apps/makedev sys-apps/net-tools sys-apps/less app-shells/bash:0 virtual/editor
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.9-r2::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/autoconf-2.69-r4::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
24 Jan 2018 05:03:37 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
24 Jan 2018 05:03:37 UTC: ERROR : CatalystError: Stage build aborting due to error.
24 Jan 2018 05:03:37 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.5/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.5/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
24 Jan 2018 05:03:37 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
6055.13user 696.51system 1:00:30elapsed 185%CPU (0avgtext+0avgdata 604652maxresident)k
319336inputs+15928096outputs (0major+294587622minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20180124T030001Z.t0XBiV/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-01-23 0:19 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-01-23 0:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2:0/0::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.6:2/2::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Emerging (1 of 48) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging (2 of 48) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (3 of 48) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging (4 of 48) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (5 of 48) sys-libs/timezone-data-2017c::gentoo
>>> Installing (4 of 48) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (6 of 48) sys-devel/binutils-config-5-r4::gentoo
>>> Emerging (7 of 48) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (7 of 48) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (1 of 48) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (2 of 48) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (3 of 48) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (5 of 48) sys-libs/timezone-data-2017c::gentoo
>>> Installing (6 of 48) sys-devel/binutils-config-5-r4::gentoo
>>> Emerging (8 of 48) app-admin/eselect-1.4.11::gentoo
>>> Installing (8 of 48) app-admin/eselect-1.4.11::gentoo
>>> Emerging (9 of 48) sys-apps/sandbox-2.12::gentoo
>>> Installing (9 of 48) sys-apps/sandbox-2.12::gentoo
>>> Emerging (10 of 48) sys-apps/man-pages-4.13::gentoo
>>> Emerging (11 of 48) sys-auth/pambase-20150213-r1::gentoo
>>> Installing (11 of 48) sys-auth/pambase-20150213-r1::gentoo
>>> Installing (10 of 48) sys-apps/man-pages-4.13::gentoo
>>> Emerging (12 of 48) virtual/libelf-3::gentoo
>>> Emerging (13 of 48) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (12 of 48) virtual/libelf-3::gentoo
>>> Installing (13 of 48) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (14 of 48) sys-kernel/linux-headers-4.13::gentoo
>>> Installing (14 of 48) sys-kernel/linux-headers-4.13::gentoo
>>> Emerging (15 of 48) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (15 of 48) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (16 of 48) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (17 of 48) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (16 of 48) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Installing (17 of 48) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (18 of 48) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (19 of 48) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (18 of 48) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (20 of 48) net-misc/iputils-20171016_pre::gentoo
>>> Emerging (21 of 48) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (19 of 48) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (21 of 48) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (20 of 48) net-misc/iputils-20171016_pre::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (22 of 48) sys-libs/readline-7.0_p3::gentoo
>>> Installing (22 of 48) sys-libs/readline-7.0_p3::gentoo
>>> Emerging (23 of 48) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (24 of 48) dev-libs/libpipeline-1.4.2::gentoo
>>> Emerging (25 of 48) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (26 of 48) sys-apps/kbd-2.0.4::gentoo
>>> Emerging (27 of 48) net-misc/rsync-3.1.2-r2::gentoo
>>> Emerging (28 of 48) sys-apps/kmod-24::gentoo
>>> Emerging (29 of 48) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (23 of 48) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (25 of 48) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (24 of 48) dev-libs/libpipeline-1.4.2::gentoo
>>> Installing (26 of 48) sys-apps/kbd-2.0.4::gentoo
>>> Installing (27 of 48) net-misc/rsync-3.1.2-r2::gentoo
>>> Installing (28 of 48) sys-apps/kmod-24::gentoo
>>> Installing (29 of 48) sys-libs/gdbm-1.13-r2::gentoo
>>> Emerging (30 of 48) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (30 of 48) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (31 of 48) app-shells/bash-4.4_p12::gentoo
>>> Installing (31 of 48) app-shells/bash-4.4_p12::gentoo
>>> Emerging (32 of 48) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (33 of 48) dev-libs/libxml2-2.9.6::gentoo
>>> Installing (33 of 48) dev-libs/libxml2-2.9.6::gentoo
>>> Installing (32 of 48) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (34 of 48) sys-apps/less-529::gentoo
>>> Emerging (35 of 48) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (34 of 48) sys-apps/less-529::gentoo
>>> Installing (35 of 48) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (36 of 48) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (36 of 48) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (37 of 48) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (37 of 48) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (38 of 48) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (38 of 48) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (39 of 48) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (39 of 48) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (40 of 48) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (41 of 48) app-arch/tar-1.29-r3::gentoo
>>> Installing (41 of 48) app-arch/tar-1.29-r3::gentoo
>>> Installing (40 of 48) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (42 of 48) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (43 of 48) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (44 of 48) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (44 of 48) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (45 of 48) app-editors/nano-2.8.7::gentoo
>>> Emerging (46 of 48) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (42 of 48) dev-libs/elfutils-0.170-r1::gentoo
>>> Installing (43 of 48) sys-apps/gawk-4.1.4::gentoo
>>> Installing (45 of 48) app-editors/nano-2.8.7::gentoo
>>> Installing (46 of 48) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (47 of 48) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (47 of 48) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (48 of 48) sys-apps/openrc-0.34.11::gentoo
>>> Installing (48 of 48) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Emerging binary (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot net-misc/wget sys-devel/autoconf sys-apps/net-tools sys-apps/findutils sys-apps/sed sys-devel/gcc virtual/pkgconfig virtual/shadow sys-devel/libtool app-arch/bzip2 sys-apps/coreutils virtual/editor sys-apps/baselayout sys-devel/make virtual/libc sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-devel/patch net-misc/rsync app-shells/bash:0 virtual/os-headers sys-devel/gnuconfig sys-apps/diffutils sys-apps/less sys-apps/grep virtual/package-manager sys-devel/gettext sys-apps/file sys-apps/which sys-devel/bison app-arch/tar sys-devel/automake app-arch/gzip sys-devel/binutils sys-apps/makedev
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.9-r2::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/automake-1.15.1-r1::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
23 Jan 2018 00:19:42 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
23 Jan 2018 00:19:42 UTC: ERROR : CatalystError: Stage build aborting due to error.
23 Jan 2018 00:19:42 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
23 Jan 2018 00:19:42 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
10103.55user 2085.30system 1:16:22elapsed 265%CPU (0avgtext+0avgdata 2419472maxresident)k
454688inputs+17343648outputs (3major+312535240minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180122T214502Z.uM6dad/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2018-01-20 0:22 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2018-01-20 0:22 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
>>> Installing (2 of 2) sys-apps/portage-2.3.19-r1::gentoo
* Messages for package dev-lang/python-3.5.4-r1:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
The following packages are causing rebuilds:
(sys-libs/readline-7.0_p3:0/7::gentoo, ebuild scheduled for merge) causes rebuilds for:
(sys-apps/gawk-4.1.4:0/0::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.4.5-r1:3.4/3.4m::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge)
(dev-lang/python-2.7.14-r1:2.7/2.7::gentoo, ebuild scheduled for merge)
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
(sys-apps/util-linux-2.30.2:0/0::gentoo, ebuild scheduled for merge)
(app-shells/bash-4.4_p12:0/0::gentoo, ebuild scheduled for merge)
(dev-libs/libpcre-8.41-r1:3/3::gentoo, ebuild scheduled for merge)
(dev-libs/libxml2-2.9.6:2/2::gentoo, ebuild scheduled for merge)
(sys-libs/gdbm-1.13-r2:0/1.13::gentoo, ebuild scheduled for merge) causes rebuilds for:
(dev-lang/python-3.5.4-r1:3.5/3.5m::gentoo, ebuild scheduled for merge)
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/pam-1.2.1-r2
>>> Running pre-merge checks for sys-devel/gcc-6.4.0-r1
>>> Emerging (1 of 46) sys-devel/gnuconfig-20170101::gentoo
>>> Emerging (2 of 46) sys-apps/debianutils-4.8.3::gentoo
>>> Emerging (3 of 46) dev-lang/python-exec-2.4.5::gentoo
>>> Emerging (4 of 46) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (5 of 46) sys-devel/binutils-config-5-r4::gentoo
>>> Installing (4 of 46) app-text/sgml-common-0.6.3-r6::gentoo
>>> Emerging (6 of 46) sys-libs/timezone-data-2017c::gentoo
>>> Emerging (7 of 46) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (7 of 46) app-arch/unzip-6.0_p21-r2::gentoo
>>> Installing (1 of 46) sys-devel/gnuconfig-20170101::gentoo
>>> Installing (2 of 46) sys-apps/debianutils-4.8.3::gentoo
>>> Installing (3 of 46) dev-lang/python-exec-2.4.5::gentoo
>>> Installing (5 of 46) sys-devel/binutils-config-5-r4::gentoo
>>> Installing (6 of 46) sys-libs/timezone-data-2017c::gentoo
>>> Emerging (8 of 46) app-admin/eselect-1.4.11::gentoo
>>> Installing (8 of 46) app-admin/eselect-1.4.11::gentoo
>>> Emerging (9 of 46) sys-apps/sandbox-2.12::gentoo
>>> Installing (9 of 46) sys-apps/sandbox-2.12::gentoo
>>> Emerging (10 of 46) sys-apps/man-pages-4.13::gentoo
>>> Emerging (11 of 46) sys-auth/pambase-20150213-r1::gentoo
>>> Installing (11 of 46) sys-auth/pambase-20150213-r1::gentoo
>>> Installing (10 of 46) sys-apps/man-pages-4.13::gentoo
>>> Emerging (12 of 46) virtual/libelf-3::gentoo
>>> Emerging (13 of 46) dev-libs/openssl-1.0.2n::gentoo
>>> Installing (12 of 46) virtual/libelf-3::gentoo
>>> Installing (13 of 46) dev-libs/openssl-1.0.2n::gentoo
>>> Emerging (14 of 46) sys-kernel/linux-headers-4.13::gentoo
>>> Installing (14 of 46) sys-kernel/linux-headers-4.13::gentoo
>>> Emerging (15 of 46) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Installing (15 of 46) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r3::gentoo
>>> Emerging (16 of 46) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Emerging (17 of 46) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Installing (16 of 46) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r3::gentoo
>>> Installing (17 of 46) virtual/perl-Test-Harness-3.360.100_rc-r3::gentoo
>>> Emerging (18 of 46) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (19 of 46) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Emerging (20 of 46) net-misc/iputils-20171016_pre::gentoo
>>> Installing (18 of 46) virtual/perl-JSON-PP-2.273.0.100_rc-r5::gentoo
>>> Emerging (21 of 46) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (19 of 46) virtual/perl-File-Spec-3.630.100_rc-r3::gentoo
>>> Installing (21 of 46) sys-devel/autoconf-2.69-r4::gentoo
>>> Installing (20 of 46) net-misc/iputils-20171016_pre::gentoo
>>> Uninstalling sys-devel/autoconf-2.69::gentoo
>>> Emerging (22 of 46) sys-libs/pam-1.2.1-r2::gentoo
>>> Installing (22 of 46) sys-libs/pam-1.2.1-r2::gentoo
>>> Emerging (23 of 46) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (24 of 46) app-arch/tar-1.29-r3::gentoo
>>> Installing (24 of 46) app-arch/tar-1.29-r3::gentoo
>>> Installing (23 of 46) sys-devel/gcc-6.4.0-r1::gentoo
>>> Emerging (25 of 46) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (26 of 46) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Installing (26 of 46) dev-perl/Locale-gettext-1.70.0::gentoo
>>> Emerging (27 of 46) sys-libs/readline-7.0_p3::gentoo
>>> Installing (27 of 46) sys-libs/readline-7.0_p3::gentoo
>>> Installing (25 of 46) dev-libs/elfutils-0.170-r1::gentoo
>>> Emerging (28 of 46) net-firewall/iptables-1.6.1-r2::gentoo
>>> Emerging (29 of 46) net-misc/rsync-3.1.2-r2::gentoo
>>> Emerging (30 of 46) sys-process/procps-3.3.12-r1::gentoo
>>> Emerging (31 of 46) sys-apps/kmod-24::gentoo
>>> Emerging (32 of 46) app-editors/nano-2.8.7::gentoo
>>> Emerging (33 of 46) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (28 of 46) net-firewall/iptables-1.6.1-r2::gentoo
>>> Installing (30 of 46) sys-process/procps-3.3.12-r1::gentoo
>>> Installing (29 of 46) net-misc/rsync-3.1.2-r2::gentoo
>>> Installing (31 of 46) sys-apps/kmod-24::gentoo
>>> Installing (33 of 46) sys-libs/gdbm-1.13-r2::gentoo
>>> Installing (32 of 46) app-editors/nano-2.8.7::gentoo
>>> Emerging (34 of 46) sys-apps/util-linux-2.30.2::gentoo
>>> Installing (34 of 46) sys-apps/util-linux-2.30.2::gentoo
>>> Emerging (35 of 46) dev-libs/libpcre-8.41-r1::gentoo
>>> Installing (35 of 46) dev-libs/libpcre-8.41-r1::gentoo
>>> Emerging (36 of 46) app-shells/bash-4.4_p12::gentoo
>>> Installing (36 of 46) app-shells/bash-4.4_p12::gentoo
>>> Emerging (37 of 46) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Emerging (38 of 46) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (39 of 46) dev-libs/libxml2-2.9.6::gentoo
>>> Installing (39 of 46) dev-libs/libxml2-2.9.6::gentoo
>>> Installing (37 of 46) sys-apps/iproute2-4.14.1-r2::gentoo
>>> Installing (38 of 46) sys-apps/gawk-4.1.4::gentoo
>>> Emerging (40 of 46) sys-apps/less-529::gentoo
>>> Emerging (41 of 46) dev-lang/python-2.7.14-r1::gentoo
>>> Installing (40 of 46) sys-apps/less-529::gentoo
>>> Installing (41 of 46) dev-lang/python-2.7.14-r1::gentoo
>>> Emerging (42 of 46) dev-lang/python-3.4.5-r1::gentoo
>>> Installing (42 of 46) dev-lang/python-3.4.5-r1::gentoo
>>> Emerging (43 of 46) dev-lang/python-3.5.4-r1::gentoo
>>> Installing (43 of 46) dev-lang/python-3.5.4-r1::gentoo
>>> Emerging (44 of 46) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Installing (44 of 46) dev-libs/libxslt-1.1.30-r2::gentoo
>>> Emerging (45 of 46) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Installing (45 of 46) app-text/docbook-xsl-stylesheets-1.79.1-r2::gentoo
>>> Emerging (46 of 46) sys-apps/openrc-0.34.11::gentoo
>>> Installing (46 of 46) sys-apps/openrc-0.34.11::gentoo
* Messages for package sys-libs/timezone-data-2017c:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-libs/pam-1.2.1-r2:
* Some software with pre-loaded PAM libraries might experience
* warnings or failures related to missing symbols and/or versions
* after any update. While unfortunate this is a limit of the
* implementation of PAM and the software, and it requires you to
* restart the software manually after the update.
*
* You can get a list of such software running a command like
* lsof / | egrep -i 'del.*libpam\.so'
*
* Alternatively, simply reboot your system.
* Messages for package sys-devel/gcc-6.4.0-r1:
* If you have issues with packages unable to locate libstdc++.la,
* then try running 'fix_libtool_files.sh' on the old gcc versions.
* You might want to review the GCC upgrade guide when moving between
* major versions (like 4.2 to 4.3):
* https://wiki.gentoo.org/wiki/Upgrading_GCC
* Messages for package sys-apps/util-linux-2.30.2:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.4.1-r2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.4.1-r2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/pkgconfig sys-apps/net-tools sys-devel/automake sys-apps/findutils sys-apps/file sys-devel/patch virtual/editor sys-apps/baselayout app-arch/gzip app-arch/bzip2 sys-devel/gcc sys-devel/bison virtual/os-headers sys-apps/grep sys-devel/make sys-devel/gnuconfig sys-apps/less sys-apps/which virtual/shadow virtual/package-manager sys-devel/libtool virtual/libc sys-apps/gawk net-misc/wget app-shells/bash:0 app-arch/xz-utils app-arch/tar sys-apps/makedev sys-devel/binutils net-misc/rsync sys-apps/diffutils sys-devel/flex sys-devel/autoconf sys-apps/coreutils sys-devel/gettext sys-apps/sed
!!! The ebuild selected to satisfy ">=app-text/asciidoc-8.6.3" has unmet requirements.
- app-text/asciidoc-8.6.9-r2::gentoo USE="-examples -graphviz -highlight -test" PYTHON_SINGLE_TARGET="(-pypy) -python2_7" PYTHON_TARGETS="python2_7 (-pypy)"
The following REQUIRED_USE flag constraints are unsatisfied:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 )
The above constraints are a subset of the following complete expression:
exactly-one-of ( python_single_target_pypy python_single_target_python2_7 ) python_single_target_pypy? ( python_targets_pypy ) python_single_target_python2_7? ( python_targets_python2_7 )
(dependency required by "sys-apps/paludis-2.6.0::gentoo" [ebuild])
(dependency required by "app-admin/perl-cleaner-2.25::gentoo" [binary])
(dependency required by "dev-lang/perl-5.24.3::gentoo" [binary])
(dependency required by "sys-devel/automake-1.15.1-r1::gentoo" [binary])
(dependency required by "sys-devel/libtool-2.4.6-r3::gentoo" [binary])
(dependency required by "sys-devel/libtool" [argument])
20 Jan 2018 00:22:46 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
20 Jan 2018 00:22:46 UTC: ERROR : CatalystError: Stage build aborting due to error.
20 Jan 2018 00:22:46 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1354, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1454, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1363, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
20 Jan 2018 00:22:46 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
10062.64user 2027.17system 1:17:51elapsed 258%CPU (0avgtext+0avgdata 2419536maxresident)k
5856inputs+17212624outputs (11major+306214479minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20180119T214502Z.JucKvM/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-12-25 22:12 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-12-25 22:12 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
usage: catalyst [-h] [-V] [-d] [-v]
[--log-level {critical,error,warning,notice,info,debug}]
[--log-file LOG_FILE] [--color] [--nocolor] [--trace]
[--profile] [-a] [-p] [-P] [-T] [--versioned-cachedir]
[--unversioned-cachedir] [-F] [-c CONFIGS] [-f FILE]
[-s SNAPSHOT] [-C ...]
catalyst: error: argument -f/--file: file does not exist: i686/stage1.spec
Command exited with non-zero status 2
0.13user 0.00system 0:00.14elapsed 98%CPU (0avgtext+0avgdata 63392maxresident)k
0inputs+8outputs (0major+3776minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20171225T214501Z.iwoe2Q/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-12-22 22:11 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-12-22 22:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
usage: catalyst [-h] [-V] [-d] [-v]
[--log-level {critical,error,warning,notice,info,debug}]
[--log-file LOG_FILE] [--color] [--nocolor] [--trace]
[--profile] [-a] [-p] [-P] [-T] [--versioned-cachedir]
[--unversioned-cachedir] [-F] [-c CONFIGS] [-f FILE]
[-s SNAPSHOT] [-C ...]
catalyst: error: argument -f/--file: file does not exist: i686/stage1.spec
Command exited with non-zero status 2
0.12user 0.01system 0:00.14elapsed 97%CPU (0avgtext+0avgdata 62720maxresident)k
0inputs+8outputs (0major+3761minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20171222T214501Z.58gLux/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-12-20 22:11 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-12-20 22:11 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
usage: catalyst [-h] [-V] [-d] [-v]
[--log-level {critical,error,warning,notice,info,debug}]
[--log-file LOG_FILE] [--color] [--nocolor] [--trace]
[--profile] [-a] [-p] [-P] [-T] [--versioned-cachedir]
[--unversioned-cachedir] [-F] [-c CONFIGS] [-f FILE]
[-s SNAPSHOT] [-C ...]
catalyst: error: argument -f/--file: file does not exist: i686/stage1.spec
Command exited with non-zero status 2
0.11user 0.02system 0:00.14elapsed 97%CPU (0avgtext+0avgdata 63216maxresident)k
0inputs+8outputs (0major+3767minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20171220T214501Z.YdwICP/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-12-18 23:07 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-12-18 23:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
usage: catalyst [-h] [-V] [-d] [-v]
[--log-level {critical,error,warning,notice,info,debug}]
[--log-file LOG_FILE] [--color] [--nocolor] [--trace]
[--profile] [-a] [-p] [-P] [-T] [--versioned-cachedir]
[--unversioned-cachedir] [-F] [-c CONFIGS] [-f FILE]
[-s SNAPSHOT] [-C ...]
catalyst: error: argument -f/--file: file does not exist: i686/stage1.spec
Command exited with non-zero status 2
0.12user 0.01system 0:00.14elapsed 95%CPU (0avgtext+0avgdata 62704maxresident)k
0inputs+8outputs (0major+3766minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20171218T214501Z.6thIG3/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-10-26 3:26 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-10-26 3:26 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
26 Oct 2017 03:26:14 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
26 Oct 2017 03:26:14 UTC: NOTICE : Processing spec file: i686/stage1.spec
26 Oct 2017 03:26:14 UTC: NOTICE : Using target: stage1
26 Oct 2017 03:26:14 UTC: NOTICE : Source file specification matching setting is: loose
26 Oct 2017 03:26:14 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
26 Oct 2017 03:26:14 UTC: ERROR : CatalystError: File Not Found: /home/release/buildroot/x86-dev/snapshots/portage-20170809
Command exited with non-zero status 2
0.13user 0.00system 0:00.33elapsed 39%CPU (0avgtext+0avgdata 14868maxresident)k
8inputs+8outputs (0major+7237minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170809.X2HmJ4/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-10-26 3:25 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-10-26 3:25 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
26 Oct 2017 03:25:56 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
26 Oct 2017 03:25:56 UTC: NOTICE : Processing spec file: i686/stage1.spec
26 Oct 2017 03:25:56 UTC: NOTICE : Using target: stage1
26 Oct 2017 03:25:56 UTC: NOTICE : Source file specification matching setting is: loose
26 Oct 2017 03:25:56 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
26 Oct 2017 03:25:56 UTC: ERROR : CatalystError: File Not Found: /home/release/buildroot/x86-dev/snapshots/portage-20170405
Command exited with non-zero status 2
0.14user 0.01system 0:00.73elapsed 20%CPU (0avgtext+0avgdata 15176maxresident)k
24inputs+8outputs (0major+7251minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170405.vP75Hb/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-10-26 3:25 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-10-26 3:25 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
26 Oct 2017 03:25:18 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
26 Oct 2017 03:25:18 UTC: NOTICE : Processing spec file: i686/stage1.spec
26 Oct 2017 03:25:18 UTC: NOTICE : Using target: stage1
26 Oct 2017 03:25:18 UTC: NOTICE : Source file specification matching setting is: loose
26 Oct 2017 03:25:18 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
26 Oct 2017 03:25:19 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
26 Oct 2017 03:25:19 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20171018/tmp/stage1root
26 Oct 2017 03:25:19 UTC: NOTICE : purge(); clearing autoresume ...
26 Oct 2017 03:25:19 UTC: NOTICE : purge(); clearing chroot ...
26 Oct 2017 03:25:19 UTC: NOTICE : Clearing the chroot path ...
26 Oct 2017 03:25:19 UTC: NOTICE : purge(); clearing package cache ...
26 Oct 2017 03:25:19 UTC: NOTICE : purging the pkgcache ...
26 Oct 2017 03:25:19 UTC: NOTICE : purge(); clearing kerncache ...
26 Oct 2017 03:25:19 UTC: NOTICE : --- Running action sequence: unpack
26 Oct 2017 03:25:19 UTC: NOTICE : Clearing the chroot path ...
26 Oct 2017 03:25:19 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
26 Oct 2017 03:25:19 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20171018 (this may take some time) ..
26 Oct 2017 03:25:27 UTC: NOTICE : --- Running action sequence: unpack_snapshot
26 Oct 2017 03:25:28 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
Full build log at /home/release/tmp/run/catalyst-auto.20171018.kWyCpS/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-10-26 3:25 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-10-26 3:25 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
26 Oct 2017 03:25:18 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
26 Oct 2017 03:25:18 UTC: NOTICE : Processing spec file: i686/stage1.spec
26 Oct 2017 03:25:18 UTC: NOTICE : Using target: stage1
26 Oct 2017 03:25:18 UTC: NOTICE : Source file specification matching setting is: loose
26 Oct 2017 03:25:18 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
26 Oct 2017 03:25:18 UTC: ERROR : CatalystError: File Not Found: /home/release/buildroot/x86-dev/snapshots/portage-20170510
Command exited with non-zero status 2
0.16user 0.01system 0:00.52elapsed 32%CPU (0avgtext+0avgdata 14868maxresident)k
104inputs+8outputs (0major+7196minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170510.LfBOVl/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-10-26 3:25 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-10-26 3:25 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
16 Aug 2017 08:55:48 UTC: NOTICE : --- Running action sequence: unpack_snapshot
16 Aug 2017 08:55:48 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
16 Aug 2017 08:56:01 UTC: NOTICE : --- Running action sequence: setup_confdir
16 Aug 2017 08:56:01 UTC: NOTICE : --- Running action sequence: portage_overlay
16 Aug 2017 08:56:01 UTC: NOTICE : --- Running action sequence: base_dirs
16 Aug 2017 08:56:01 UTC: NOTICE : --- Running action sequence: bind
16 Aug 2017 08:56:01 UTC: NOTICE : --- Running action sequence: chroot_setup
16 Aug 2017 08:56:01 UTC: NOTICE : Setting up chroot...
16 Aug 2017 08:56:01 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
16 Aug 2017 08:56:01 UTC: WARNING : If your build fails look here first as the possible problem.
16 Aug 2017 08:56:01 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
16 Aug 2017 08:56:01 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
16 Aug 2017 08:56:01 UTC: WARNING : You have been warned.
16 Aug 2017 08:56:01 UTC: NOTICE : --- Running action sequence: setup_environment
16 Aug 2017 08:56:01 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170816/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170816/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170816/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170816 /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.6::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.6::gentoo
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Emerging (1 of 3) app-portage/elt-patches-20170422::gentoo
>>> Installing (1 of 3) app-portage/elt-patches-20170422::gentoo
>>> Emerging (2 of 3) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Installing (2 of 3) app-misc/ca-certificates-20161130.3.30.2::gentoo
>>> Emerging (3 of 3) sys-apps/openrc-0.28::gentoo
>>> Installing (3 of 3) sys-apps/openrc-0.28::gentoo
* Messages for package app-misc/ca-certificates-20161130.3.30.2:
* To prevent applications relying on system's trusted root certificate store
* from using CAs where at least one major browser vendor Gentoo is following
* has decided to apply trust level restrictions, the following
* certificate(s) were removed:
* mozilla/StartCom_Certification_Authority.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign_China.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/Certification_Authority_of_WoSign_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/CA_WoSign_ECC_Root.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/StartCom_Certification_Authority_G2.crt removed; see https://bugs.gentoo.org/598072 for details
* mozilla/WoSign.crt removed; see https://bugs.gentoo.org/598072 for details
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot app-arch/xz-utils app-arch/tar app-arch/bzip2 virtual/shadow sys-devel/gcc sys-devel/gettext sys-apps/findutils sys-devel/autoconf net-misc/wget sys-apps/net-tools sys-devel/flex sys-devel/libtool app-arch/gzip sys-apps/coreutils virtual/pkgconfig sys-apps/gawk sys-devel/binutils sys-apps/file sys-apps/grep virtual/os-headers sys-devel/patch sys-devel/automake net-misc/rsync sys-devel/bison sys-apps/which sys-devel/gnuconfig virtual/package-manager app-shells/bash:0 sys-apps/less sys-devel/make sys-apps/baselayout virtual/editor sys-apps/diffutils sys-apps/makedev virtual/libc sys-apps/sed
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-libs/glibc-2.23-r4
>>> Running pre-merge checks for sys-devel/gcc-5.4.0-r3
>>> Emerging (1 of 81) sys-libs/ncurses-6.0-r1::gentoo for /tmp/stage1root/
>>> Installing (1 of 81) sys-libs/ncurses-6.0-r1::gentoo to /tmp/stage1root/
>>> Emerging (2 of 81) app-arch/bzip2-1.0.6-r8::gentoo for /tmp/stage1root/
>>> Installing (2 of 81) app-arch/bzip2-1.0.6-r8::gentoo to /tmp/stage1root/
>>> Emerging (3 of 81) virtual/libiconv-0-r2::gentoo for /tmp/stage1root/
>>> Installing (3 of 81) virtual/libiconv-0-r2::gentoo to /tmp/stage1root/
>>> Emerging (4 of 81) virtual/libintl-0-r2::gentoo for /tmp/stage1root/
>>> Installing (4 of 81) virtual/libintl-0-r2::gentoo to /tmp/stage1root/
>>> Emerging (5 of 81) sys-devel/gnuconfig-20161104::gentoo for /tmp/stage1root/
>>> Installing (5 of 81) sys-devel/gnuconfig-20161104::gentoo to /tmp/stage1root/
>>> Emerging (6 of 81) sys-apps/gentoo-functions-0.10::gentoo for /tmp/stage1root/
>>> Installing (6 of 81) sys-apps/gentoo-functions-0.10::gentoo to /tmp/stage1root/
>>> Emerging (7 of 81) dev-lang/python-exec-2.4.4::gentoo for /tmp/stage1root/
>>> Installing (7 of 81) dev-lang/python-exec-2.4.4::gentoo to /tmp/stage1root/
>>> Emerging (8 of 81) app-arch/tar-1.29-r1::gentoo for /tmp/stage1root/
>>> Installing (8 of 81) app-arch/tar-1.29-r1::gentoo to /tmp/stage1root/
>>> Emerging (9 of 81) sys-apps/sed-4.2.2::gentoo for /tmp/stage1root/
>>> Installing (9 of 81) sys-apps/sed-4.2.2::gentoo to /tmp/stage1root/
>>> Emerging (10 of 81) sys-libs/timezone-data-2017a::gentoo for /tmp/stage1root/
>>> Installing (10 of 81) sys-libs/timezone-data-2017a::gentoo to /tmp/stage1root/
>>> Emerging (11 of 81) app-misc/editor-wrapper-4::gentoo for /tmp/stage1root/
>>> Installing (11 of 81) app-misc/editor-wrapper-4::gentoo to /tmp/stage1root/
>>> Emerging (12 of 81) sys-devel/gcc-config-1.7.3::gentoo for /tmp/stage1root/
>>> Installing (12 of 81) sys-devel/gcc-config-1.7.3::gentoo to /tmp/stage1root/
>>> Emerging (13 of 81) sys-apps/findutils-4.6.0-r1::gentoo for /tmp/stage1root/
>>> Installing (13 of 81) sys-apps/findutils-4.6.0-r1::gentoo to /tmp/stage1root/
>>> Emerging (14 of 81) app-arch/gzip-1.8::gentoo for /tmp/stage1root/
>>> Installing (14 of 81) app-arch/gzip-1.8::gentoo to /tmp/stage1root/
>>> Emerging (15 of 81) sys-apps/gawk-4.1.3::gentoo for /tmp/stage1root/
>>> Installing (15 of 81) sys-apps/gawk-4.1.3::gentoo to /tmp/stage1root/
>>> Emerging (16 of 81) sys-devel/patch-2.7.5::gentoo for /tmp/stage1root/
>>> Installing (16 of 81) sys-devel/patch-2.7.5::gentoo to /tmp/stage1root/
>>> Emerging (17 of 81) sys-apps/which-2.21::gentoo for /tmp/stage1root/
>>> Installing (17 of 81) sys-apps/which-2.21::gentoo to /tmp/stage1root/
>>> Emerging (18 of 81) sys-devel/make-4.2.1::gentoo for /tmp/stage1root/
>>> Installing (18 of 81) sys-devel/make-4.2.1::gentoo to /tmp/stage1root/
>>> Emerging (19 of 81) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (19 of 81) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
>>> Emerging (20 of 81) sys-devel/automake-wrapper-10::gentoo for /tmp/stage1root/
>>> Installing (20 of 81) sys-devel/automake-wrapper-10::gentoo to /tmp/stage1root/
>>> Emerging (21 of 81) sys-devel/autoconf-wrapper-13::gentoo for /tmp/stage1root/
>>> Installing (21 of 81) sys-devel/autoconf-wrapper-13::gentoo to /tmp/stage1root/
>>> Emerging (22 of 81) sys-apps/makedev-3.23.1::gentoo for /tmp/stage1root/
>>> Installing (22 of 81) sys-apps/makedev-3.23.1::gentoo to /tmp/stage1root/
>>> Emerging (23 of 81) sys-apps/coreutils-8.25::gentoo for /tmp/stage1root/
>>> Installing (23 of 81) sys-apps/coreutils-8.25::gentoo to /tmp/stage1root/
>>> Emerging (24 of 81) sys-devel/binutils-config-5-r3::gentoo for /tmp/stage1root/
>>> Installing (24 of 81) sys-devel/binutils-config-5-r3::gentoo to /tmp/stage1root/
>>> Emerging (25 of 81) app-misc/pax-utils-1.1.7::gentoo for /tmp/stage1root/
>>> Installing (25 of 81) app-misc/pax-utils-1.1.7::gentoo to /tmp/stage1root/
>>> Emerging (26 of 81) sys-apps/net-tools-1.60_p20160215155418::gentoo for /tmp/stage1root/
>>> Installing (26 of 81) sys-apps/net-tools-1.60_p20160215155418::gentoo to /tmp/stage1root/
>>> Emerging (27 of 81) sys-apps/less-487::gentoo for /tmp/stage1root/
>>> Installing (27 of 81) sys-apps/less-487::gentoo to /tmp/stage1root/
>>> Emerging (28 of 81) sys-apps/diffutils-3.5::gentoo for /tmp/stage1root/
>>> Installing (28 of 81) sys-apps/diffutils-3.5::gentoo to /tmp/stage1root/
>>> Emerging (29 of 81) sys-devel/m4-1.4.17::gentoo for /tmp/stage1root/
>>> Installing (29 of 81) sys-devel/m4-1.4.17::gentoo to /tmp/stage1root/
>>> Emerging (30 of 81) dev-libs/libltdl-2.4.6::gentoo for /tmp/stage1root/
>>> Installing (30 of 81) dev-libs/libltdl-2.4.6::gentoo to /tmp/stage1root/
>>> Emerging (31 of 81) sys-libs/zlib-1.2.11::gentoo for /tmp/stage1root/
>>> Installing (31 of 81) sys-libs/zlib-1.2.11::gentoo to /tmp/stage1root/
>>> Emerging (32 of 81) dev-libs/gmp-6.1.0::gentoo for /tmp/stage1root/
>>> Installing (32 of 81) dev-libs/gmp-6.1.0::gentoo to /tmp/stage1root/
>>> Emerging (33 of 81) app-arch/xz-utils-5.2.3::gentoo for /tmp/stage1root/
>>> Installing (33 of 81) app-arch/xz-utils-5.2.3::gentoo to /tmp/stage1root/
>>> Emerging (34 of 81) sys-apps/file-5.30::gentoo for /tmp/stage1root/
>>> Installing (34 of 81) sys-apps/file-5.30::gentoo to /tmp/stage1root/
>>> Emerging (35 of 81) dev-libs/popt-1.16-r2::gentoo for /tmp/stage1root/
>>> Installing (35 of 81) dev-libs/popt-1.16-r2::gentoo to /tmp/stage1root/
>>> Emerging (36 of 81) sys-apps/shadow-4.4-r2::gentoo for /tmp/stage1root/
>>> Installing (36 of 81) sys-apps/shadow-4.4-r2::gentoo to /tmp/stage1root/
>>> Emerging (37 of 81) sys-apps/sandbox-2.10-r3::gentoo for /tmp/stage1root/
>>> Installing (37 of 81) sys-apps/sandbox-2.10-r3::gentoo to /tmp/stage1root/
>>> Emerging (38 of 81) dev-libs/libffi-3.2.1::gentoo for /tmp/stage1root/
>>> Installing (38 of 81) dev-libs/libffi-3.2.1::gentoo to /tmp/stage1root/
>>> Emerging (39 of 81) dev-util/pkgconfig-0.28-r2::gentoo for /tmp/stage1root/
>>> Installing (39 of 81) dev-util/pkgconfig-0.28-r2::gentoo to /tmp/stage1root/
>>> Emerging (40 of 81) sys-devel/flex-2.6.1::gentoo for /tmp/stage1root/
>>> Installing (40 of 81) sys-devel/flex-2.6.1::gentoo to /tmp/stage1root/
>>> Emerging (41 of 81) sys-devel/bison-3.0.4-r1::gentoo for /tmp/stage1root/
>>> Installing (41 of 81) sys-devel/bison-3.0.4-r1::gentoo to /tmp/stage1root/
>>> Emerging (42 of 81) dev-libs/mpfr-3.1.3_p4::gentoo for /tmp/stage1root/
>>> Installing (42 of 81) dev-libs/mpfr-3.1.3_p4::gentoo to /tmp/stage1root/
>>> Emerging (43 of 81) virtual/libffi-3.0.13-r1::gentoo for /tmp/stage1root/
>>> Installing (43 of 81) virtual/libffi-3.0.13-r1::gentoo to /tmp/stage1root/
>>> Emerging (44 of 81) virtual/shadow-0::gentoo for /tmp/stage1root/
>>> Installing (44 of 81) virtual/shadow-0::gentoo to /tmp/stage1root/
>>> Emerging (45 of 81) sys-devel/binutils-2.28-r2::gentoo for /tmp/stage1root/
>>> Installing (45 of 81) sys-devel/binutils-2.28-r2::gentoo to /tmp/stage1root/
>>> Emerging (46 of 81) virtual/pkgconfig-0-r1::gentoo for /tmp/stage1root/
>>> Installing (46 of 81) virtual/pkgconfig-0-r1::gentoo to /tmp/stage1root/
>>> Emerging (47 of 81) dev-libs/mpc-1.0.2-r1::gentoo for /tmp/stage1root/
>>> Installing (47 of 81) dev-libs/mpc-1.0.2-r1::gentoo to /tmp/stage1root/
>>> Emerging (48 of 81) app-admin/eselect-1.4.8::gentoo for /tmp/stage1root/
>>> Installing (48 of 81) app-admin/eselect-1.4.8::gentoo to /tmp/stage1root/
>>> Emerging (49 of 81) app-eselect/eselect-python-20160516::gentoo for /tmp/stage1root/
>>> Installing (49 of 81) app-eselect/eselect-python-20160516::gentoo to /tmp/stage1root/
>>> Emerging (50 of 81) sys-kernel/linux-headers-4.4::gentoo for /tmp/stage1root/
>>> Installing (50 of 81) sys-kernel/linux-headers-4.4::gentoo to /tmp/stage1root/
>>> Emerging (51 of 81) virtual/os-headers-0::gentoo for /tmp/stage1root/
>>> Installing (51 of 81) virtual/os-headers-0::gentoo to /tmp/stage1root/
>>> Emerging (52 of 81) dev-libs/expat-2.2.1::gentoo for /tmp/stage1root/
>>> Installing (52 of 81) dev-libs/expat-2.2.1::gentoo to /tmp/stage1root/
>>> Emerging (53 of 81) dev-libs/iniparser-3.1-r1::gentoo for /tmp/stage1root/
>>> Installing (53 of 81) dev-libs/iniparser-3.1-r1::gentoo to /tmp/stage1root/
>>> Emerging (54 of 81) app-portage/portage-utils-0.62::gentoo for /tmp/stage1root/
>>> Installing (54 of 81) app-portage/portage-utils-0.62::gentoo to /tmp/stage1root/
>>> Emerging (55 of 81) dev-lang/perl-5.24.1-r2::gentoo for /tmp/stage1root/
>>> Installing (55 of 81) dev-lang/perl-5.24.1-r2::gentoo to /tmp/stage1root/
>>> Emerging (56 of 81) virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo for /tmp/stage1root/
>>> Installing (56 of 81) virtual/perl-Test-Harness-3.360.100_rc-r1::gentoo to /tmp/stage1root/
>>> Emerging (57 of 81) virtual/perl-Data-Dumper-2.160.0-r1::gentoo for /tmp/stage1root/
>>> Installing (57 of 81) virtual/perl-Data-Dumper-2.160.0-r1::gentoo to /tmp/stage1root/
>>> Emerging (58 of 81) perl-core/File-Temp-0.230.400-r1::gentoo for /tmp/stage1root/
>>> Installing (58 of 81) perl-core/File-Temp-0.230.400-r1::gentoo to /tmp/stage1root/
>>> Emerging (59 of 81) virtual/perl-File-Temp-0.230.400-r5::gentoo for /tmp/stage1root/
>>> Installing (59 of 81) virtual/perl-File-Temp-0.230.400-r5::gentoo to /tmp/stage1root/
>>> Emerging (60 of 81) perl-core/File-Path-2.130.0::gentoo for /tmp/stage1root/
>>> Installing (60 of 81) perl-core/File-Path-2.130.0::gentoo to /tmp/stage1root/
>>> Emerging (61 of 81) virtual/perl-File-Path-2.130.0::gentoo for /tmp/stage1root/
>>> Installing (61 of 81) virtual/perl-File-Path-2.130.0::gentoo to /tmp/stage1root/
>>> Emerging (62 of 81) sys-devel/autoconf-2.69::gentoo for /tmp/stage1root/
>>> Installing (62 of 81) sys-devel/autoconf-2.69::gentoo to /tmp/stage1root/
>>> Emerging (63 of 81) sys-devel/automake-1.15-r2::gentoo for /tmp/stage1root/
>>> Installing (63 of 81) sys-devel/automake-1.15-r2::gentoo to /tmp/stage1root/
>>> Emerging (64 of 81) sys-devel/libtool-2.4.6-r3::gentoo for /tmp/stage1root/
>>> Installing (64 of 81) sys-devel/libtool-2.4.6-r3::gentoo to /tmp/stage1root/
>>> Emerging (65 of 81) sys-libs/glibc-2.23-r4::gentoo for /tmp/stage1root/
Full build log at /home/release/tmp/run/catalyst-auto.20170816.GrvTak/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-09-27 3:11 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-09-27 3:11 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 11970 bytes --]
27 Sep 2017 03:06:10 UTC: NOTICE : --- Running action sequence: setup_environment
27 Sep 2017 03:06:10 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170927/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170927/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170927/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170927 /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
!!! The following installed packages are masked:
- sys-devel/binutils-2.28-r2::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.8::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.8::gentoo
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Emerging (1 of 8) sys-apps/file-5.32::gentoo
>>> Installing (1 of 8) sys-apps/file-5.32::gentoo
>>> Emerging (2 of 8) sys-devel/binutils-2.28.1::gentoo
>>> Installing (2 of 8) sys-devel/binutils-2.28.1::gentoo
>>> Emerging (3 of 8) virtual/perl-Test-Harness-3.360.100_rc-r2::gentoo
>>> Installing (3 of 8) virtual/perl-Test-Harness-3.360.100_rc-r2::gentoo
>>> Emerging (4 of 8) virtual/perl-File-Spec-3.630.100_rc-r2::gentoo
>>> Installing (4 of 8) virtual/perl-File-Spec-3.630.100_rc-r2::gentoo
>>> Emerging (5 of 8) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2::gentoo
>>> Installing (5 of 8) virtual/perl-ExtUtils-MakeMaker-7.100.200_rc-r2::gentoo
>>> Emerging (6 of 8) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r2::gentoo
>>> Installing (6 of 8) virtual/perl-Parse-CPAN-Meta-1.441.700.100_rc-r2::gentoo
>>> Emerging (7 of 8) virtual/perl-JSON-PP-2.273.0.100_rc-r4::gentoo
>>> Installing (7 of 8) virtual/perl-JSON-PP-2.273.0.100_rc-r4::gentoo
>>> Emerging (8 of 8) sys-apps/help2man-1.47.4::gentoo
>>> Installing (8 of 8) sys-apps/help2man-1.47.4::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/os-headers sys-devel/binutils sys-devel/bison sys-apps/coreutils sys-apps/net-tools sys-apps/gawk app-arch/gzip virtual/libc sys-devel/gettext sys-apps/diffutils sys-devel/automake virtual/pkgconfig sys-apps/baselayout sys-devel/gnuconfig sys-apps/findutils app-arch/xz-utils app-arch/tar sys-apps/which sys-devel/patch sys-devel/gcc sys-devel/autoconf sys-apps/grep virtual/package-manager net-misc/rsync sys-apps/less virtual/shadow sys-devel/make net-misc/wget app-arch/bzip2 app-shells/bash:0 sys-apps/sed sys-devel/libtool sys-devel/flex virtual/editor sys-apps/file sys-apps/makedev
[ebuild rR ] app-arch/bzip2-1.0.6-r8 [1.0.6-r8]
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild rR ] sys-libs/zlib-1.2.11 [1.2.11]
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.32 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.28.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.2-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.8 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.7.5 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/zlib:0
(sys-libs/zlib-1.2.11:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/zlib-1.2.11:0/0::gentoo, installed) pulled in by
>=sys-libs/zlib-1.2.3:0/0= required by (net-misc/openssh-7.5_p1-r1:0/0::gentoo, installed)
^^^^^
(and 3 more with the same problem)
app-arch/bzip2:0
(app-arch/bzip2-1.0.6-r8:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(app-arch/bzip2-1.0.6-r8:0/0::gentoo, installed) pulled in by
app-arch/bzip2:0/0= required by (dev-lang/python-3.4.5:3.4/3.4m::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
27 Sep 2017 03:11:05 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
27 Sep 2017 03:11:06 UTC: ERROR : CatalystError: Stage build aborting due to error.
27 Sep 2017 03:11:06 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1312, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1321, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
27 Sep 2017 03:11:06 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
374.50user 53.08system 5:12.00elapsed 137%CPU (0avgtext+0avgdata 350668maxresident)k
25296inputs+4348904outputs (0major+28212800minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170927.e8Ed0C/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-09-20 3:09 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-09-20 3:09 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 12112 bytes --]
20 Sep 2017 03:05:23 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
20 Sep 2017 03:05:38 UTC: NOTICE : --- Running action sequence: setup_confdir
20 Sep 2017 03:05:38 UTC: NOTICE : --- Running action sequence: portage_overlay
20 Sep 2017 03:05:38 UTC: NOTICE : --- Running action sequence: base_dirs
20 Sep 2017 03:05:38 UTC: NOTICE : --- Running action sequence: bind
20 Sep 2017 03:05:38 UTC: NOTICE : --- Running action sequence: chroot_setup
20 Sep 2017 03:05:38 UTC: NOTICE : Setting up chroot...
20 Sep 2017 03:05:38 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
20 Sep 2017 03:05:38 UTC: WARNING : If your build fails look here first as the possible problem.
20 Sep 2017 03:05:38 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
20 Sep 2017 03:05:38 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
20 Sep 2017 03:05:38 UTC: WARNING : You have been warned.
20 Sep 2017 03:05:38 UTC: NOTICE : --- Running action sequence: setup_environment
20 Sep 2017 03:05:38 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170920/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170920/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170920/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170920 /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
!!! The following installed packages are masked:
- sys-devel/binutils-2.28-r2::gentoo (masked by: package.mask)
/usr/portage/profiles/package.mask:
# Michał Górny <mgorny@gentoo.org>, Andreas K. Hüttel <dilfridge@gentoo.org>,
# Matthias Maier <tamiko@gentoo.org> (21 May 2017)
# These old versions of toolchain packages (binutils, gcc, glibc) are no
# longer officially supported and are not suitable for general use. Using
# these packages can result in build failures (and possible breakage) for
# many packages, and may leave your system vulnerable to known security
# exploits.
# If you still use one of these old toolchain packages, please upgrade (and
# switch the compiler / the binutils) ASAP. If you need them for a specific
# (isolated) use case, feel free to unmask them on your system.
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.6::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.6::gentoo
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-apps/file-5.31::gentoo
>>> Installing (1 of 2) sys-apps/file-5.31::gentoo
>>> Emerging (2 of 2) sys-devel/binutils-2.28.1::gentoo
>>> Installing (2 of 2) sys-devel/binutils-2.28.1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot virtual/pkgconfig sys-devel/binutils virtual/libc app-arch/bzip2 sys-devel/automake sys-devel/bison sys-devel/flex sys-devel/gnuconfig sys-apps/diffutils app-shells/bash:0 sys-devel/libtool sys-apps/less app-arch/xz-utils virtual/shadow sys-apps/findutils sys-apps/net-tools virtual/editor sys-apps/file sys-apps/coreutils sys-apps/gawk sys-devel/gcc sys-apps/grep sys-apps/makedev sys-devel/gettext sys-apps/baselayout net-misc/rsync sys-apps/which virtual/package-manager sys-devel/autoconf net-misc/wget sys-devel/make sys-devel/patch app-arch/gzip virtual/os-headers app-arch/tar sys-apps/sed
[ebuild rR ] app-arch/bzip2-1.0.6-r8 [1.0.6-r8]
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild rR ] sys-libs/zlib-1.2.11 [1.2.11]
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.31 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.28.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.2-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.7.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.6 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/zlib:0
(sys-libs/zlib-1.2.11:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/zlib-1.2.11:0/0::gentoo, installed) pulled in by
>=sys-libs/zlib-1.1.3:0/0= required by (dev-lang/python-2.7.12:2.7/2.7::gentoo, installed)
^^^^^
(and 3 more with the same problem)
app-arch/bzip2:0
(app-arch/bzip2-1.0.6-r8:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(app-arch/bzip2-1.0.6-r8:0/0::gentoo, installed) pulled in by
app-arch/bzip2:0/0= required by (dev-lang/python-3.4.5:3.4/3.4m::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
20 Sep 2017 03:09:40 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
20 Sep 2017 03:09:41 UTC: ERROR : CatalystError: Stage build aborting due to error.
20 Sep 2017 03:09:41 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1312, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1321, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
20 Sep 2017 03:09:41 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
354.94user 46.89system 4:21.74elapsed 153%CPU (0avgtext+0avgdata 351080maxresident)k
280inputs+4331232outputs (0major+26038537minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170920.mNifGf/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-09-13 3:09 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-09-13 3:09 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
13 Sep 2017 03:05:04 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
13 Sep 2017 03:05:04 UTC: NOTICE : Processing spec file: i686/stage1.spec
13 Sep 2017 03:05:04 UTC: NOTICE : Using target: stage1
13 Sep 2017 03:05:04 UTC: NOTICE : Source file specification matching setting is: loose
13 Sep 2017 03:05:04 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
13 Sep 2017 03:05:04 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
13 Sep 2017 03:05:04 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170913/tmp/stage1root
13 Sep 2017 03:05:04 UTC: NOTICE : purge(); clearing autoresume ...
13 Sep 2017 03:05:04 UTC: NOTICE : purge(); clearing chroot ...
13 Sep 2017 03:05:04 UTC: NOTICE : Clearing the chroot path ...
13 Sep 2017 03:05:04 UTC: NOTICE : purge(); clearing package cache ...
13 Sep 2017 03:05:04 UTC: NOTICE : purging the pkgcache ...
13 Sep 2017 03:05:04 UTC: NOTICE : purge(); clearing kerncache ...
13 Sep 2017 03:05:04 UTC: NOTICE : --- Running action sequence: unpack
13 Sep 2017 03:05:04 UTC: NOTICE : Clearing the chroot path ...
13 Sep 2017 03:05:04 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
13 Sep 2017 03:05:04 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170913 (this may take some time) ..
13 Sep 2017 03:05:08 UTC: NOTICE : --- Running action sequence: unpack_snapshot
13 Sep 2017 03:05:08 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
13 Sep 2017 03:05:16 UTC: NOTICE : --- Running action sequence: setup_confdir
13 Sep 2017 03:05:16 UTC: NOTICE : --- Running action sequence: portage_overlay
13 Sep 2017 03:05:16 UTC: NOTICE : --- Running action sequence: base_dirs
13 Sep 2017 03:05:16 UTC: NOTICE : --- Running action sequence: bind
13 Sep 2017 03:05:16 UTC: NOTICE : --- Running action sequence: chroot_setup
13 Sep 2017 03:05:16 UTC: NOTICE : Setting up chroot...
13 Sep 2017 03:05:16 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
13 Sep 2017 03:05:16 UTC: WARNING : If your build fails look here first as the possible problem.
13 Sep 2017 03:05:16 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
13 Sep 2017 03:05:16 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
13 Sep 2017 03:05:16 UTC: WARNING : You have been warned.
13 Sep 2017 03:05:16 UTC: NOTICE : --- Running action sequence: setup_environment
13 Sep 2017 03:05:16 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170913/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170913/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170913/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170913 /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.6::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.3.6::gentoo
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) sys-apps/file-5.31::gentoo
>>> Installing (1 of 2) sys-apps/file-5.31::gentoo
>>> Emerging (2 of 2) sys-devel/binutils-2.28.1::gentoo
>>> Installing (2 of 2) sys-devel/binutils-2.28.1::gentoo
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.3::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.3::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.3 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* You should reboot the system now to get /run mounted with tmpfs!
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/makedev app-arch/bzip2 sys-apps/coreutils sys-devel/flex virtual/editor net-misc/wget app-arch/gzip virtual/os-headers sys-devel/gettext sys-devel/bison sys-devel/libtool net-misc/rsync sys-devel/binutils sys-apps/diffutils sys-apps/less sys-apps/sed app-arch/tar sys-apps/findutils sys-devel/automake virtual/pkgconfig sys-apps/net-tools sys-apps/grep virtual/libc sys-devel/gnuconfig app-arch/xz-utils sys-apps/file sys-devel/gcc sys-apps/gawk virtual/package-manager sys-apps/baselayout app-shells/bash:0 sys-devel/patch sys-apps/which sys-devel/make virtual/shadow sys-devel/autoconf
[ebuild rR ] app-arch/bzip2-1.0.6-r8 [1.0.6-r8]
[ebuild N ] sys-libs/ncurses-6.0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r8 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r2 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20161104 to /tmp/stage1root/
[ebuild N ] sys-apps/gentoo-functions-0.12 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.2 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.29-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2017a to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.8 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.6.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.1.3 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.3 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.5 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.21 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.2.1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-10 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.25 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-5-r3 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-1.1.7 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.5 to /tmp/stage1root/
[ebuild N ] sys-apps/less-487 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20160215155418 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.17 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.6 to /tmp/stage1root/
[ebuild rR ] sys-libs/zlib-1.2.11 [1.2.11]
[ebuild N ] sys-libs/zlib-1.2.11 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-6.1.0 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.2.3 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.31 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.10-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.2.1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.5 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-3.0.4-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.3_p4 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.28.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.2-r1 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.8 to /tmp/stage1root/
[ebuild N ] app-eselect/eselect-python-20160516 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-4.4 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.2.1 to /tmp/stage1root/
[ebuild N ] dev-libs/iniparser-3.1-r1 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.62 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.24.1-r2 to /tmp/stage1root/
[ebuild N ] virtual/perl-Test-Harness-3.360.100_rc-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.160.0-r1 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r5 to /tmp/stage1root/
[ebuild N ] perl-core/File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Path-2.130.0 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.15-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.6-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.23-r4 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.3_p8-r3 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.3_p48-r1 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.7.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.4.5 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.12 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.3.6 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.25 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.19.1-r1 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.2 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-3.0 to /tmp/stage1root/
[ebuild N ] virtual/libc-1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-5.4.0-r3 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.4-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.8.1 to /tmp/stage1root/
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/zlib:0
(sys-libs/zlib-1.2.11:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/zlib-1.2.11:0/0::gentoo, installed) pulled in by
>=sys-libs/zlib-1.1.3:0/0= required by (dev-lang/python-3.4.5:3.4/3.4m::gentoo, installed)
^^^^^
(and 3 more with the same problem)
app-arch/bzip2:0
(app-arch/bzip2-1.0.6-r8:0/1::gentoo, ebuild scheduled for merge) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(app-arch/bzip2-1.0.6-r8:0/0::gentoo, installed) pulled in by
app-arch/bzip2:0/0= required by (dev-lang/python-2.7.12:2.7/2.7::gentoo, installed)
^^^^^
(and 1 more with the same problem)
NOTE: Use the '--verbose-conflicts' option to display parents omitted above
13 Sep 2017 03:09:34 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
13 Sep 2017 03:09:34 UTC: ERROR : CatalystError: Stage build aborting due to error.
13 Sep 2017 03:09:34 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1312, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1321, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
13 Sep 2017 03:09:34 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
349.63user 46.80system 4:30.58elapsed 146%CPU (0avgtext+0avgdata 344220maxresident)k
528inputs+4349216outputs (5major+26019638minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170913.rXQRdU/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-09-05 1:19 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-09-05 1:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Using command line specified Catalyst configuration file, /etc/catalyst/release/x86-auto.conf
Setting sharedir to config file value "/usr/lib64/catalyst/"
Setting snapshot_cache to config file value "/release/tmp/snapshots"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/release/tmp/distfiles/"
Setting options to config file value "autoresume bindist pkgcache preserve_libs seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Preserving libs during unmerge.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /release/tmp/snapshots/20170905/
The autoresume path is /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20170905/
stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20170905/tmp/stage1root
Location of the package cache is /release/buildroot/x86-dev/packages/default/stage1-i686-20170905/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20170905/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20170905/
clearing chroot ...
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20170905/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20170905/
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20170905/
Starting tar extract from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /release/buildroot/x86-dev/tmp/default/stage1-i686-20170905/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20170905///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20170905//tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20170905//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20170905/
>>> Regenerating /etc/ld.so.cache...
Adding USE=" build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.3.6::gentoo
>>> Failed to emerge sys-apps/portage-2.3.6, Log file:
>>> '/var/tmp/portage/sys-apps/portage-2.3.6/temp/build.log'
* Package: sys-apps/portage-2.3.6
* Repository: gentoo
* Maintainer: dev-portage@gentoo.org
* Upstream: dev-portage@gentoo.org
* USE: abi_x86_32 build elibc_glibc ipc kernel_linux native-extensions python_targets_python2_7 python_targets_python3_4 userland_GNU x86 xattr
* FEATURES: preserve-libs sandbox userpriv usersandbox
/usr/bin/install: cannot change permissions of '/var/tmp/portage/sys-apps/portage-2.3.6/work': No such file or directory
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* ERROR: sys-apps/portage-2.3.6::gentoo failed (unpack phase):
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* Failed to create dir '/var/tmp/portage/sys-apps/portage-2.3.6/work'
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
*
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* Call stack:
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* ebuild.sh, line 767: Called __ebuild_main 'unpack'
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* phase-functions.sh, line 1008: Called __dyn_unpack
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* phase-functions.sh, line 240: Called die
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* The specific snippet of code:
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* install -m${PORTAGE_WORKDIR_MODE:-0700} -d "${WORKDIR}" || die "Failed to create dir '${WORKDIR}'"
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
*
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.3.6::gentoo'`,
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.3.6::gentoo'`.
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.3.6/temp/build.log'.
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.3.6/temp/environment'.
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* Working directory: '/var/tmp/portage/sys-apps/portage-2.3.6/homedir'
/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/isolated-functions.sh: line 264: echo: write error: No space left on device
* S: '/var/tmp/portage/sys-apps/portage-2.3.6/work/portage-2.3.6'
Traceback (most recent call last):
File "/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/ebuild-ipc.py", line 282, in <module>
sys.exit(ebuild_ipc_main(sys.argv[1:]))
File "/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/ebuild-ipc.py", line 279, in ebuild_ipc_main
return ebuild_ipc.communicate(args)
File "/var/tmp/portage/._portage_reinstall_.crc1dmfu/bin/ebuild-ipc.py", line 136, in communicate
lock_obj = portage.locks.lockfile(self.ipc_lock_file, unlinkfile=True)
File "/var/tmp/portage/._portage_reinstall_.crc1dmfu/pym/portage/locks.py", line 194, in lockfile
locking_method = portage._eintr_func_wrapper(_get_lock_fn())
File "/var/tmp/portage/._portage_reinstall_.crc1dmfu/pym/portage/locks.py", line 62, in _get_lock_fn
fd, lock_path = tempfile.mkstemp()
File "/usr/lib/python3.4/tempfile.py", line 271, in mkstemp
dir = gettempdir()
File "/usr/lib/python3.4/tempfile.py", line 239, in gettempdir
tempdir = _get_default_tempdir()
File "/usr/lib/python3.4/tempfile.py", line 180, in _get_default_tempdir
dirlist)
FileNotFoundError: [Errno 2] No usable temporary directory found in ['/var/tmp/portage/sys-apps/portage-2.3.6/temp', '/var/tmp/portage/sys-apps/portage-2.3.6/temp', '/var/tmp/portage/sys-apps/portage-2.3.6/temp', '/tmp', '/var/tmp', '/usr/tmp', '/var/tmp/portage/._portage_reinstall_.crc1dmfu/pym']
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
* Messages for package sys-apps/portage-2.3.6:
* The ebuild phase 'unpack' has exited unexpectedly. This type of behavior
* is known to be triggered by things such as failed variable assignments
* (bug #190128) or bad substitution errors (bug #200313). Normally, before
* exiting, bash should have displayed an error message above. If bash did
* not produce an error message above, it's possible that the ebuild has
* called `exit` when it should have called `die` instead. This behavior
* may also be triggered by a corrupt bash binary or a hardware problem
* such as memory or cpu malfunction. If the problem is not reproducible or
* it appears to occur randomly, then it is likely to be triggered by a
* hardware problem. If you suspect a hardware problem then you should try
* some basic hardware diagnostics such as memtest. Please do not report
* this as a bug unless it is consistently reproducible and you are sure
* that your bash binary and hardware are functioning properly.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20170905/.catalyst_lock'
Command exited with non-zero status 1
35.28user 5.63system 0:34.94elapsed 117%CPU (0avgtext+0avgdata 798288maxresident)k
72848inputs+1813800outputs (0major+268260minor)pagefaults 0swaps
Full build log at /release/tmp/run/catalyst-auto.20170905.kKb518/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-03-22 8:04 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-03-22 8:04 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
22 Mar 2017 08:03:47 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
22 Mar 2017 08:03:47 UTC: NOTICE : Processing spec file: i686/stage1.spec
22 Mar 2017 08:03:47 UTC: NOTICE : Using target: stage1
22 Mar 2017 08:03:47 UTC: NOTICE : Source file specification matching setting is: loose
22 Mar 2017 08:03:47 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
22 Mar 2017 08:03:48 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
22 Mar 2017 08:03:48 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170322/tmp/stage1root
22 Mar 2017 08:03:48 UTC: NOTICE : purge(); clearing autoresume ...
22 Mar 2017 08:03:48 UTC: NOTICE : purge(); clearing chroot ...
22 Mar 2017 08:03:48 UTC: NOTICE : Clearing the chroot path ...
22 Mar 2017 08:03:48 UTC: NOTICE : purge(); clearing package cache ...
22 Mar 2017 08:03:48 UTC: NOTICE : purging the pkgcache ...
22 Mar 2017 08:03:48 UTC: NOTICE : purge(); clearing kerncache ...
22 Mar 2017 08:03:48 UTC: NOTICE : --- Running action sequence: unpack
22 Mar 2017 08:03:48 UTC: NOTICE : Clearing the chroot path ...
22 Mar 2017 08:03:48 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
22 Mar 2017 08:03:48 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170322 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
22 Mar 2017 08:03:48 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170322 failed.
22 Mar 2017 08:03:48 UTC: NOTICE : --- Running action sequence: unpack_snapshot
22 Mar 2017 08:03:48 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
22 Mar 2017 08:04:01 UTC: NOTICE : --- Running action sequence: setup_confdir
22 Mar 2017 08:04:01 UTC: NOTICE : --- Running action sequence: portage_overlay
22 Mar 2017 08:04:01 UTC: NOTICE : --- Running action sequence: base_dirs
22 Mar 2017 08:04:01 UTC: NOTICE : --- Running action sequence: bind
22 Mar 2017 08:04:01 UTC: NOTICE : --- Running action sequence: chroot_setup
22 Mar 2017 08:04:01 UTC: NOTICE : Setting up chroot...
22 Mar 2017 08:04:01 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
22 Mar 2017 08:04:01 UTC: WARNING : If your build fails look here first as the possible problem.
22 Mar 2017 08:04:01 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
22 Mar 2017 08:04:01 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
22 Mar 2017 08:04:01 UTC: WARNING : You have been warned.
22 Mar 2017 08:04:01 UTC: NOTICE : --- Running action sequence: setup_environment
22 Mar 2017 08:04:01 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170322/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170322/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170322/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170322 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
22 Mar 2017 08:04:01 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
22 Mar 2017 08:04:01 UTC: ERROR : CatalystError: Stage build aborting due to error.
22 Mar 2017 08:04:01 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1312, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1321, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
22 Mar 2017 08:04:01 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.45user 3.62system 0:14.22elapsed 127%CPU (0avgtext+0avgdata 296552maxresident)k
8inputs+1390760outputs (0major+209491minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170322.TcVmTe/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-03-15 9:24 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-03-15 9:24 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
15 Mar 2017 09:24:05 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
15 Mar 2017 09:24:05 UTC: NOTICE : Processing spec file: i686/stage1.spec
15 Mar 2017 09:24:05 UTC: NOTICE : Using target: stage1
15 Mar 2017 09:24:05 UTC: NOTICE : Source file specification matching setting is: loose
15 Mar 2017 09:24:05 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
15 Mar 2017 09:24:06 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
15 Mar 2017 09:24:06 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170315/tmp/stage1root
15 Mar 2017 09:24:06 UTC: NOTICE : purge(); clearing autoresume ...
15 Mar 2017 09:24:06 UTC: NOTICE : purge(); clearing chroot ...
15 Mar 2017 09:24:06 UTC: NOTICE : Clearing the chroot path ...
15 Mar 2017 09:24:06 UTC: NOTICE : purge(); clearing package cache ...
15 Mar 2017 09:24:06 UTC: NOTICE : purging the pkgcache ...
15 Mar 2017 09:24:06 UTC: NOTICE : purge(); clearing kerncache ...
15 Mar 2017 09:24:06 UTC: NOTICE : --- Running action sequence: unpack
15 Mar 2017 09:24:06 UTC: NOTICE : Clearing the chroot path ...
15 Mar 2017 09:24:06 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
15 Mar 2017 09:24:06 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170315 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
15 Mar 2017 09:24:06 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170315 failed.
15 Mar 2017 09:24:06 UTC: NOTICE : --- Running action sequence: unpack_snapshot
15 Mar 2017 09:24:06 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
15 Mar 2017 09:24:21 UTC: NOTICE : --- Running action sequence: setup_confdir
15 Mar 2017 09:24:21 UTC: NOTICE : --- Running action sequence: portage_overlay
15 Mar 2017 09:24:21 UTC: NOTICE : --- Running action sequence: base_dirs
15 Mar 2017 09:24:21 UTC: NOTICE : --- Running action sequence: bind
15 Mar 2017 09:24:21 UTC: NOTICE : --- Running action sequence: chroot_setup
15 Mar 2017 09:24:21 UTC: NOTICE : Setting up chroot...
15 Mar 2017 09:24:21 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
15 Mar 2017 09:24:21 UTC: WARNING : If your build fails look here first as the possible problem.
15 Mar 2017 09:24:21 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
15 Mar 2017 09:24:21 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
15 Mar 2017 09:24:21 UTC: WARNING : You have been warned.
15 Mar 2017 09:24:21 UTC: NOTICE : --- Running action sequence: setup_environment
15 Mar 2017 09:24:21 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170315/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170315/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170315/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170315 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
15 Mar 2017 09:24:21 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
15 Mar 2017 09:24:21 UTC: ERROR : CatalystError: Stage build aborting due to error.
15 Mar 2017 09:24:21 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1312, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1321, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
15 Mar 2017 09:24:21 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.14user 3.86system 0:16.07elapsed 111%CPU (0avgtext+0avgdata 296708maxresident)k
8inputs+1392880outputs (0major+208337minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170315.946gpj/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-03-08 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-03-08 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
08 Mar 2017 03:01:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
08 Mar 2017 03:01:32 UTC: NOTICE : Processing spec file: i686/stage1.spec
08 Mar 2017 03:01:32 UTC: NOTICE : Using target: stage1
08 Mar 2017 03:01:32 UTC: NOTICE : Source file specification matching setting is: loose
08 Mar 2017 03:01:32 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
08 Mar 2017 03:01:33 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
08 Mar 2017 03:01:33 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170308/tmp/stage1root
08 Mar 2017 03:01:33 UTC: NOTICE : purge(); clearing autoresume ...
08 Mar 2017 03:01:33 UTC: NOTICE : purge(); clearing chroot ...
08 Mar 2017 03:01:33 UTC: NOTICE : Clearing the chroot path ...
08 Mar 2017 03:01:33 UTC: NOTICE : purge(); clearing package cache ...
08 Mar 2017 03:01:33 UTC: NOTICE : purging the pkgcache ...
08 Mar 2017 03:01:33 UTC: NOTICE : purge(); clearing kerncache ...
08 Mar 2017 03:01:33 UTC: NOTICE : --- Running action sequence: unpack
08 Mar 2017 03:01:33 UTC: NOTICE : Clearing the chroot path ...
08 Mar 2017 03:01:33 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
08 Mar 2017 03:01:33 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170308 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
08 Mar 2017 03:01:35 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170308 failed.
08 Mar 2017 03:01:35 UTC: NOTICE : --- Running action sequence: unpack_snapshot
08 Mar 2017 03:01:35 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
tar: portage/dev-perl/Proc-Wait3/metadata.xml: Cannot write: No space left on device
tar: portage/dev-perl/Proc-Wait3/Manifest: Cannot write: No space left on device
tar: portage/dev-perl/Proc-Wait3/Proc-Wait3-0.50.0.ebuild: Cannot write: No space left on device
tar: portage/dev-perl/gnome2-vfs-perl: Cannot mkdir: No space left on device
tar: portage/dev-perl/gnome2-vfs-perl: Cannot mkdir: No space left on device
tar: portage/dev-perl/gnome2-vfs-perl/gnome2-vfs-perl-1.81.0-r1.ebuild: Cannot open: No such file or directory
tar: portage/dev-perl/gnome2-vfs-perl: Cannot mkdir: No space left on device
tar: portage/dev-perl/gnome2-vfs-perl/metadata.xml: Cannot open: No such file or directory
tar: portage/dev-perl/gnome2-vfs-perl: Cannot mkdir: No space left on device
tar: portage/dev-perl/gnome2-vfs-perl/Manifest: Cannot open: No such file or directory
tar: portage/dev-perl/TheSchwartz: Cannot mkdir: No space left on device
tar: portage/dev-perl/TheSchwartz: Cannot mkdir: No space left on device
tar: portage/dev-perl/TheSchwartz/metadata.xml: Cannot open: No such file or directory
tar: portage/dev-perl/TheSchwartz: Cannot mkdir: No space left on device
tar: portage/dev-perl/TheSchwartz/TheSchwartz-1.120.0.ebuild: Cannot open: No such file or directory
tar: portage/dev-perl/TheSchwartz: Cannot mkdir: No space left on device
tar: portage/dev-perl/TheSchwartz/Manifest: Cannot open: No such file or directory
tar: portage/dev-perl/String-ShellQuote: Cannot mkdir: No space left on device
tar: portage/dev-perl/String-ShellQuote: Cannot mkdir: No space left on device
tar: portage/dev-perl/String-ShellQuote/String-ShellQuote-1.40.0-r1.ebuild: Cannot open: No such file or directory
tar: portage/dev-perl/String-ShellQuote: Cannot mkdir: No space left on device
tar: portage/dev-perl/String-ShellQuote/metadata.xml: Cannot open: No such file or directory
tar: portage/dev-perl/String-ShellQuote: Cannot mkdir: No space left on device
tar: portage/dev-perl/String-ShellQuote/Manifest: Cannot open: No su--- Logging error ---
Traceback (most recent call last):
File "/usr/lib64/python3.4/logging/__init__.py", line 982, in emit
self.flush()
File "/usr/lib64/python3.4/logging/__init__.py", line 962, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "/usr/lib/python-exec/python3.4/catalyst", line 37, in <module>
main(sys.argv[1:])
File "/usr/lib64/python3.4/site-packages/catalyst/main.py", line 276, in main
return _main(parser, opts)
File "/usr/lib64/python3.4/site-packages/catalyst/main.py", line 426, in _main
success = build_target(addlargs)
File "/usr/lib64/python3.4/site-packages/catalyst/main.py", line 113, in build_target
return target.run()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 864, in unpack_snapshot
log.error('%s', unpack_errmsg % unpack_info)
File "/usr/lib64/python3.4/logging/__init__.py", line 1308, in error
self._log(ERROR, msg, args, **kwargs)
File "/usr/lib64/python3.4/site-packages/catalyst/log.py", line 29, in _log
super(CatalystLogger, self)._log(level, line, (), **kwargs)
Message: 'Error unpacking snapshot using mode lbzip2'
Arguments: ()
--- Logging error ---
OSError: [Errno 28] No space left on device
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1412, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 872, in unpack_snapshot
data = self.settings["snapshot_path_hash"])
File "/usr/lib64/python3.4/site-packages/catalyst/base/resume.py", line 56, in enable
myf.write(data)
OSError: [Errno 28] No space left on device
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/logging/__init__.py", line 982, in emit
self.flush()
File "/usr/lib64/python3.4/logging/__init__.py", line 962, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "/usr/lib/python-exec/python3.4/catalyst", line 37, in <module>
main(sys.argv[1:])
File "/usr/lib64/python3.4/site-packages/catalyst/main.py", line 276, in main
return _main(parser, opts)
File "/usr/lib64/python3.4/site-packages/catalyst/main.py", line 426, in _main
success = build_target(addlargs)
File "/usr/lib64/python3.4/site-packages/catalyst/main.py", line 113, in build_target
return target.run()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1418, in run
log.error('Exception running action sequence %s', x, exc_info=True)
File "/usr/lib64/python3.4/logging/__init__.py", line 1308, in error
self._log(ERROR, msg, args, **kwargs)
File "/usr/lib64/python3.4/site-packages/catalyst/log.py", line 29, in _log
super(CatalystLogger, self)._log(level, line, (), **kwargs)
Message: 'Exception running action sequence unpack_snapshot'
Arguments: ()
--- Logging error ---
Traceback (most recent call last):
File "/usr/lib64/python3.4/logging/__init__.py", line 982, in emit
self.flush()
File "/usr/lib64/python3.4/logging/__init__.py", line 962, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "/usr/lib/python-exec/python3.4/catalyst", line 37, in <module>
main(sys.argv[1:])
File "/usr/lib64/python3.4/site-packages/catalyst/main.py", line 276, in main
return _main(parser, opts)
File "/usr/lib64/python3.4/site-packages/catalyst/main.py", line 426, in _main
success = build_target(addlargs)
File "/usr/lib64/python3.4/site-packages/catalyst/main.py", line 113, in build_target
return target.run()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1423, in run
log.notice('Cleaning up... Running unbind()')
File "/usr/lib64/python3.4/site-packages/catalyst/log.py",
Full build log at /home/release/tmp/run/catalyst-auto.20170308.UN2loX/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-03-01 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-03-01 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
01 Mar 2017 03:00:24 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
01 Mar 2017 03:00:24 UTC: NOTICE : Processing spec file: i686/stage1.spec
01 Mar 2017 03:00:24 UTC: NOTICE : Using target: stage1
01 Mar 2017 03:00:24 UTC: NOTICE : Source file specification matching setting is: loose
01 Mar 2017 03:00:24 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
01 Mar 2017 03:00:25 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
01 Mar 2017 03:00:25 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170301/tmp/stage1root
01 Mar 2017 03:00:25 UTC: NOTICE : purge(); clearing autoresume ...
01 Mar 2017 03:00:25 UTC: NOTICE : purge(); clearing chroot ...
01 Mar 2017 03:00:25 UTC: NOTICE : Clearing the chroot path ...
01 Mar 2017 03:00:25 UTC: NOTICE : purge(); clearing package cache ...
01 Mar 2017 03:00:25 UTC: NOTICE : purging the pkgcache ...
01 Mar 2017 03:00:25 UTC: NOTICE : purge(); clearing kerncache ...
01 Mar 2017 03:00:25 UTC: NOTICE : --- Running action sequence: unpack
01 Mar 2017 03:00:25 UTC: NOTICE : Clearing the chroot path ...
01 Mar 2017 03:00:25 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
01 Mar 2017 03:00:25 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170301 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
01 Mar 2017 03:00:26 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170301 failed.
01 Mar 2017 03:00:26 UTC: NOTICE : --- Running action sequence: unpack_snapshot
01 Mar 2017 03:00:26 UTC: ERROR : Exception running action sequence unpack_snapshot
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1416, in run
getattr(self, x)()
AttributeError: 'stage1' object has no attribute ' unpack_snapshot'
01 Mar 2017 03:00:26 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
4.50user 0.26system 0:01.44elapsed 328%CPU (0avgtext+0avgdata 296740maxresident)k
6400inputs+110192outputs (0major+85048minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170301.PHRLk5/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-02-22 3:10 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-02-22 3:10 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
22 Feb 2017 03:10:42 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
22 Feb 2017 03:10:42 UTC: NOTICE : Processing spec file: i686/stage1.spec
22 Feb 2017 03:10:42 UTC: NOTICE : Using target: stage1
22 Feb 2017 03:10:42 UTC: NOTICE : Source file specification matching setting is: loose
22 Feb 2017 03:10:42 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
22 Feb 2017 03:10:43 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
22 Feb 2017 03:10:43 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170222/tmp/stage1root
22 Feb 2017 03:10:43 UTC: NOTICE : purge(); clearing autoresume ...
22 Feb 2017 03:10:43 UTC: NOTICE : purge(); clearing chroot ...
22 Feb 2017 03:10:43 UTC: NOTICE : Clearing the chroot path ...
22 Feb 2017 03:10:43 UTC: NOTICE : purge(); clearing package cache ...
22 Feb 2017 03:10:43 UTC: NOTICE : purging the pkgcache ...
22 Feb 2017 03:10:43 UTC: NOTICE : purge(); clearing kerncache ...
22 Feb 2017 03:10:43 UTC: NOTICE : --- Running action sequence: unpack
22 Feb 2017 03:10:43 UTC: NOTICE : Clearing the chroot path ...
22 Feb 2017 03:10:43 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
22 Feb 2017 03:10:43 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170222 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
22 Feb 2017 03:10:43 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170222 failed.
22 Feb 2017 03:10:43 UTC: NOTICE : --- Running action sequence: unpack_snapshot
22 Feb 2017 03:10:43 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
22 Feb 2017 03:10:57 UTC: NOTICE : --- Running action sequence: setup_confdir
22 Feb 2017 03:10:57 UTC: NOTICE : --- Running action sequence: portage_overlay
22 Feb 2017 03:10:57 UTC: NOTICE : --- Running action sequence: base_dirs
22 Feb 2017 03:10:57 UTC: NOTICE : --- Running action sequence: bind
22 Feb 2017 03:10:57 UTC: NOTICE : --- Running action sequence: chroot_setup
22 Feb 2017 03:10:57 UTC: NOTICE : Setting up chroot...
22 Feb 2017 03:10:57 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
22 Feb 2017 03:10:57 UTC: WARNING : If your build fails look here first as the possible problem.
22 Feb 2017 03:10:57 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
22 Feb 2017 03:10:57 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
22 Feb 2017 03:10:57 UTC: WARNING : You have been warned.
22 Feb 2017 03:10:57 UTC: NOTICE : --- Running action sequence: setup_environment
22 Feb 2017 03:10:57 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170222/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170222/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170222/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170222 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
22 Feb 2017 03:10:57 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
22 Feb 2017 03:10:58 UTC: ERROR : CatalystError: Stage build aborting due to error.
22 Feb 2017 03:10:58 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
22 Feb 2017 03:10:58 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.55user 3.47system 0:16.19elapsed 111%CPU (0avgtext+0avgdata 296544maxresident)k
9224inputs+1380280outputs (0major+204734minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170222.64br05/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-02-15 3:11 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-02-15 3:11 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
15 Feb 2017 03:11:17 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
15 Feb 2017 03:11:17 UTC: NOTICE : Processing spec file: i686/stage1.spec
15 Feb 2017 03:11:17 UTC: NOTICE : Using target: stage1
15 Feb 2017 03:11:17 UTC: NOTICE : Source file specification matching setting is: loose
15 Feb 2017 03:11:17 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
15 Feb 2017 03:11:18 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
15 Feb 2017 03:11:18 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170215/tmp/stage1root
15 Feb 2017 03:11:18 UTC: NOTICE : purge(); clearing autoresume ...
15 Feb 2017 03:11:18 UTC: NOTICE : purge(); clearing chroot ...
15 Feb 2017 03:11:18 UTC: NOTICE : Clearing the chroot path ...
15 Feb 2017 03:11:18 UTC: NOTICE : purge(); clearing package cache ...
15 Feb 2017 03:11:18 UTC: NOTICE : purging the pkgcache ...
15 Feb 2017 03:11:18 UTC: NOTICE : purge(); clearing kerncache ...
15 Feb 2017 03:11:18 UTC: NOTICE : --- Running action sequence: unpack
15 Feb 2017 03:11:18 UTC: NOTICE : Clearing the chroot path ...
15 Feb 2017 03:11:18 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
15 Feb 2017 03:11:18 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170215 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
15 Feb 2017 03:11:18 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170215 failed.
15 Feb 2017 03:11:18 UTC: NOTICE : --- Running action sequence: unpack_snapshot
15 Feb 2017 03:11:18 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
15 Feb 2017 03:11:33 UTC: NOTICE : --- Running action sequence: setup_confdir
15 Feb 2017 03:11:33 UTC: NOTICE : --- Running action sequence: portage_overlay
15 Feb 2017 03:11:33 UTC: NOTICE : --- Running action sequence: base_dirs
15 Feb 2017 03:11:33 UTC: NOTICE : --- Running action sequence: bind
15 Feb 2017 03:11:33 UTC: NOTICE : --- Running action sequence: chroot_setup
15 Feb 2017 03:11:33 UTC: NOTICE : Setting up chroot...
15 Feb 2017 03:11:33 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
15 Feb 2017 03:11:33 UTC: WARNING : If your build fails look here first as the possible problem.
15 Feb 2017 03:11:33 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
15 Feb 2017 03:11:33 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
15 Feb 2017 03:11:33 UTC: WARNING : You have been warned.
15 Feb 2017 03:11:33 UTC: NOTICE : --- Running action sequence: setup_environment
15 Feb 2017 03:11:33 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170215/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170215/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170215/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170215 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
15 Feb 2017 03:11:33 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
15 Feb 2017 03:11:34 UTC: ERROR : CatalystError: Stage build aborting due to error.
15 Feb 2017 03:11:34 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
15 Feb 2017 03:11:34 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.20user 3.89system 0:16.80elapsed 107%CPU (0avgtext+0avgdata 296564maxresident)k
104inputs+1380992outputs (0major+198356minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170215.kkSz4b/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-02-08 3:11 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-02-08 3:11 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
08 Feb 2017 03:11:05 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
08 Feb 2017 03:11:05 UTC: NOTICE : Processing spec file: i686/stage1.spec
08 Feb 2017 03:11:05 UTC: NOTICE : Using target: stage1
08 Feb 2017 03:11:05 UTC: NOTICE : Source file specification matching setting is: loose
08 Feb 2017 03:11:05 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
08 Feb 2017 03:11:06 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
08 Feb 2017 03:11:06 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170208/tmp/stage1root
08 Feb 2017 03:11:06 UTC: NOTICE : purge(); clearing autoresume ...
08 Feb 2017 03:11:06 UTC: NOTICE : purge(); clearing chroot ...
08 Feb 2017 03:11:06 UTC: NOTICE : Clearing the chroot path ...
08 Feb 2017 03:11:06 UTC: NOTICE : purge(); clearing package cache ...
08 Feb 2017 03:11:06 UTC: NOTICE : purging the pkgcache ...
08 Feb 2017 03:11:06 UTC: NOTICE : purge(); clearing kerncache ...
08 Feb 2017 03:11:06 UTC: NOTICE : --- Running action sequence: unpack
08 Feb 2017 03:11:06 UTC: NOTICE : Clearing the chroot path ...
08 Feb 2017 03:11:06 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
08 Feb 2017 03:11:06 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170208 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
08 Feb 2017 03:11:07 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170208 failed.
08 Feb 2017 03:11:07 UTC: NOTICE : --- Running action sequence: unpack_snapshot
08 Feb 2017 03:11:07 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
08 Feb 2017 03:11:18 UTC: NOTICE : --- Running action sequence: setup_confdir
08 Feb 2017 03:11:18 UTC: NOTICE : --- Running action sequence: portage_overlay
08 Feb 2017 03:11:18 UTC: NOTICE : --- Running action sequence: base_dirs
08 Feb 2017 03:11:18 UTC: NOTICE : --- Running action sequence: bind
08 Feb 2017 03:11:19 UTC: NOTICE : --- Running action sequence: chroot_setup
08 Feb 2017 03:11:19 UTC: NOTICE : Setting up chroot...
08 Feb 2017 03:11:19 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
08 Feb 2017 03:11:19 UTC: WARNING : If your build fails look here first as the possible problem.
08 Feb 2017 03:11:19 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
08 Feb 2017 03:11:19 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
08 Feb 2017 03:11:19 UTC: WARNING : You have been warned.
08 Feb 2017 03:11:19 UTC: NOTICE : --- Running action sequence: setup_environment
08 Feb 2017 03:11:19 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170208/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170208/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170208/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170208 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
08 Feb 2017 03:11:19 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
08 Feb 2017 03:11:19 UTC: ERROR : CatalystError: Stage build aborting due to error.
08 Feb 2017 03:11:19 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
08 Feb 2017 03:11:19 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.67user 3.55system 0:13.85elapsed 131%CPU (0avgtext+0avgdata 296584maxresident)k
56inputs+1383616outputs (0major+203551minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170208.EGULMu/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-02-01 3:10 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-02-01 3:10 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
01 Feb 2017 03:10:41 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
01 Feb 2017 03:10:41 UTC: NOTICE : Processing spec file: i686/stage1.spec
01 Feb 2017 03:10:41 UTC: NOTICE : Using target: stage1
01 Feb 2017 03:10:41 UTC: NOTICE : Source file specification matching setting is: loose
01 Feb 2017 03:10:41 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
01 Feb 2017 03:10:42 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
01 Feb 2017 03:10:42 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170201/tmp/stage1root
01 Feb 2017 03:10:42 UTC: NOTICE : purge(); clearing autoresume ...
01 Feb 2017 03:10:42 UTC: NOTICE : purge(); clearing chroot ...
01 Feb 2017 03:10:42 UTC: NOTICE : Clearing the chroot path ...
01 Feb 2017 03:10:42 UTC: NOTICE : purge(); clearing package cache ...
01 Feb 2017 03:10:42 UTC: NOTICE : purging the pkgcache ...
01 Feb 2017 03:10:42 UTC: NOTICE : purge(); clearing kerncache ...
01 Feb 2017 03:10:42 UTC: NOTICE : --- Running action sequence: unpack
01 Feb 2017 03:10:42 UTC: NOTICE : Clearing the chroot path ...
01 Feb 2017 03:10:42 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
01 Feb 2017 03:10:42 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170201 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
01 Feb 2017 03:10:43 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170201 failed.
01 Feb 2017 03:10:43 UTC: NOTICE : --- Running action sequence: unpack_snapshot
01 Feb 2017 03:10:43 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
01 Feb 2017 03:10:55 UTC: NOTICE : --- Running action sequence: setup_confdir
01 Feb 2017 03:10:55 UTC: NOTICE : --- Running action sequence: portage_overlay
01 Feb 2017 03:10:55 UTC: NOTICE : --- Running action sequence: base_dirs
01 Feb 2017 03:10:55 UTC: NOTICE : --- Running action sequence: bind
01 Feb 2017 03:10:55 UTC: NOTICE : --- Running action sequence: chroot_setup
01 Feb 2017 03:10:55 UTC: NOTICE : Setting up chroot...
01 Feb 2017 03:10:55 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
01 Feb 2017 03:10:55 UTC: WARNING : If your build fails look here first as the possible problem.
01 Feb 2017 03:10:55 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
01 Feb 2017 03:10:55 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
01 Feb 2017 03:10:55 UTC: WARNING : You have been warned.
01 Feb 2017 03:10:55 UTC: NOTICE : --- Running action sequence: setup_environment
01 Feb 2017 03:10:55 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170201/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170201/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170201/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170201 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
01 Feb 2017 03:10:56 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
01 Feb 2017 03:10:56 UTC: ERROR : CatalystError: Stage build aborting due to error.
01 Feb 2017 03:10:56 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
01 Feb 2017 03:10:56 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.64user 3.65system 0:14.61elapsed 125%CPU (0avgtext+0avgdata 299764maxresident)k
123264inputs+1388616outputs (0major+204207minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170201.Wa3Fir/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-01-25 3:11 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-01-25 3:11 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
25 Jan 2017 03:11:41 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
25 Jan 2017 03:11:41 UTC: NOTICE : Processing spec file: i686/stage1.spec
25 Jan 2017 03:11:41 UTC: NOTICE : Using target: stage1
25 Jan 2017 03:11:41 UTC: NOTICE : Source file specification matching setting is: loose
25 Jan 2017 03:11:41 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
25 Jan 2017 03:11:42 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
25 Jan 2017 03:11:42 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170125/tmp/stage1root
25 Jan 2017 03:11:42 UTC: NOTICE : purge(); clearing autoresume ...
25 Jan 2017 03:11:42 UTC: NOTICE : purge(); clearing chroot ...
25 Jan 2017 03:11:42 UTC: NOTICE : Clearing the chroot path ...
25 Jan 2017 03:11:42 UTC: NOTICE : purge(); clearing package cache ...
25 Jan 2017 03:11:42 UTC: NOTICE : purging the pkgcache ...
25 Jan 2017 03:11:42 UTC: NOTICE : purge(); clearing kerncache ...
25 Jan 2017 03:11:42 UTC: NOTICE : --- Running action sequence: unpack
25 Jan 2017 03:11:42 UTC: NOTICE : Clearing the chroot path ...
25 Jan 2017 03:11:42 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
25 Jan 2017 03:11:42 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170125 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
25 Jan 2017 03:11:43 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170125 failed.
25 Jan 2017 03:11:43 UTC: NOTICE : --- Running action sequence: unpack_snapshot
25 Jan 2017 03:11:43 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
25 Jan 2017 03:11:56 UTC: NOTICE : --- Running action sequence: setup_confdir
25 Jan 2017 03:11:56 UTC: NOTICE : --- Running action sequence: portage_overlay
25 Jan 2017 03:11:56 UTC: NOTICE : --- Running action sequence: base_dirs
25 Jan 2017 03:11:56 UTC: NOTICE : --- Running action sequence: bind
25 Jan 2017 03:11:56 UTC: NOTICE : --- Running action sequence: chroot_setup
25 Jan 2017 03:11:56 UTC: NOTICE : Setting up chroot...
25 Jan 2017 03:11:56 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
25 Jan 2017 03:11:56 UTC: WARNING : If your build fails look here first as the possible problem.
25 Jan 2017 03:11:56 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
25 Jan 2017 03:11:56 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
25 Jan 2017 03:11:56 UTC: WARNING : You have been warned.
25 Jan 2017 03:11:56 UTC: NOTICE : --- Running action sequence: setup_environment
25 Jan 2017 03:11:56 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170125/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170125/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170125/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170125 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
25 Jan 2017 03:11:56 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
25 Jan 2017 03:11:56 UTC: ERROR : CatalystError: Stage build aborting due to error.
25 Jan 2017 03:11:56 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
25 Jan 2017 03:11:56 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.48user 3.92system 0:14.87elapsed 123%CPU (0avgtext+0avgdata 321664maxresident)k
11088inputs+1393232outputs (0major+204893minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170125.cq6iW1/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-01-18 3:11 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-01-18 3:11 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
18 Jan 2017 03:10:55 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
18 Jan 2017 03:10:55 UTC: NOTICE : Processing spec file: i686/stage1.spec
18 Jan 2017 03:10:55 UTC: NOTICE : Using target: stage1
18 Jan 2017 03:10:55 UTC: NOTICE : Source file specification matching setting is: loose
18 Jan 2017 03:10:55 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
18 Jan 2017 03:10:56 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
18 Jan 2017 03:10:56 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170118/tmp/stage1root
18 Jan 2017 03:10:56 UTC: NOTICE : purge(); clearing autoresume ...
18 Jan 2017 03:10:56 UTC: NOTICE : purge(); clearing chroot ...
18 Jan 2017 03:10:56 UTC: NOTICE : Clearing the chroot path ...
18 Jan 2017 03:10:56 UTC: NOTICE : purge(); clearing package cache ...
18 Jan 2017 03:10:56 UTC: NOTICE : purging the pkgcache ...
18 Jan 2017 03:10:56 UTC: NOTICE : purge(); clearing kerncache ...
18 Jan 2017 03:10:56 UTC: NOTICE : --- Running action sequence: unpack
18 Jan 2017 03:10:56 UTC: NOTICE : Clearing the chroot path ...
18 Jan 2017 03:10:56 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
18 Jan 2017 03:10:56 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170118 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
18 Jan 2017 03:10:56 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170118 failed.
18 Jan 2017 03:10:56 UTC: NOTICE : --- Running action sequence: unpack_snapshot
18 Jan 2017 03:10:56 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
18 Jan 2017 03:11:11 UTC: NOTICE : --- Running action sequence: setup_confdir
18 Jan 2017 03:11:11 UTC: NOTICE : --- Running action sequence: portage_overlay
18 Jan 2017 03:11:11 UTC: NOTICE : --- Running action sequence: base_dirs
18 Jan 2017 03:11:11 UTC: NOTICE : --- Running action sequence: bind
18 Jan 2017 03:11:11 UTC: NOTICE : --- Running action sequence: chroot_setup
18 Jan 2017 03:11:11 UTC: NOTICE : Setting up chroot...
18 Jan 2017 03:11:11 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
18 Jan 2017 03:11:11 UTC: WARNING : If your build fails look here first as the possible problem.
18 Jan 2017 03:11:11 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
18 Jan 2017 03:11:11 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
18 Jan 2017 03:11:11 UTC: WARNING : You have been warned.
18 Jan 2017 03:11:11 UTC: NOTICE : --- Running action sequence: setup_environment
18 Jan 2017 03:11:11 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170118/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170118/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170118/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170118 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
18 Jan 2017 03:11:11 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
18 Jan 2017 03:11:11 UTC: ERROR : CatalystError: Stage build aborting due to error.
18 Jan 2017 03:11:11 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
18 Jan 2017 03:11:11 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.10user 3.92system 0:16.08elapsed 112%CPU (0avgtext+0avgdata 305868maxresident)k
2960inputs+1392600outputs (0major+209103minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170118.aA5h4f/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-01-11 3:08 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-01-11 3:08 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
11 Jan 2017 03:08:31 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
11 Jan 2017 03:08:31 UTC: NOTICE : Processing spec file: i686/stage1.spec
11 Jan 2017 03:08:31 UTC: NOTICE : Using target: stage1
11 Jan 2017 03:08:31 UTC: NOTICE : Source file specification matching setting is: loose
11 Jan 2017 03:08:31 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
11 Jan 2017 03:08:32 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
11 Jan 2017 03:08:32 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170111/tmp/stage1root
11 Jan 2017 03:08:32 UTC: NOTICE : purge(); clearing autoresume ...
11 Jan 2017 03:08:32 UTC: NOTICE : purge(); clearing chroot ...
11 Jan 2017 03:08:32 UTC: NOTICE : Clearing the chroot path ...
11 Jan 2017 03:08:32 UTC: NOTICE : purge(); clearing package cache ...
11 Jan 2017 03:08:32 UTC: NOTICE : purging the pkgcache ...
11 Jan 2017 03:08:32 UTC: NOTICE : purge(); clearing kerncache ...
11 Jan 2017 03:08:32 UTC: NOTICE : --- Running action sequence: unpack
11 Jan 2017 03:08:32 UTC: NOTICE : Clearing the chroot path ...
11 Jan 2017 03:08:32 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
11 Jan 2017 03:08:32 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170111 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
11 Jan 2017 03:08:33 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170111 failed.
11 Jan 2017 03:08:33 UTC: NOTICE : --- Running action sequence: unpack_snapshot
11 Jan 2017 03:08:33 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
11 Jan 2017 03:08:48 UTC: NOTICE : --- Running action sequence: setup_confdir
11 Jan 2017 03:08:48 UTC: NOTICE : --- Running action sequence: portage_overlay
11 Jan 2017 03:08:48 UTC: NOTICE : --- Running action sequence: base_dirs
11 Jan 2017 03:08:48 UTC: NOTICE : --- Running action sequence: bind
11 Jan 2017 03:08:48 UTC: NOTICE : --- Running action sequence: chroot_setup
11 Jan 2017 03:08:48 UTC: NOTICE : Setting up chroot...
11 Jan 2017 03:08:48 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
11 Jan 2017 03:08:48 UTC: WARNING : If your build fails look here first as the possible problem.
11 Jan 2017 03:08:48 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
11 Jan 2017 03:08:48 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
11 Jan 2017 03:08:48 UTC: WARNING : You have been warned.
11 Jan 2017 03:08:48 UTC: NOTICE : --- Running action sequence: setup_environment
11 Jan 2017 03:08:48 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170111/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170111/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170111/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170111 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
11 Jan 2017 03:08:48 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
11 Jan 2017 03:08:49 UTC: ERROR : CatalystError: Stage build aborting due to error.
11 Jan 2017 03:08:49 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
11 Jan 2017 03:08:49 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.50user 3.96system 0:17.48elapsed 105%CPU (0avgtext+0avgdata 296676maxresident)k
0inputs+1398656outputs (0major+202419minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170111.4y6bBd/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2017-01-04 3:09 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2017-01-04 3:09 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
04 Jan 2017 03:08:55 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
04 Jan 2017 03:08:55 UTC: NOTICE : Processing spec file: i686/stage1.spec
04 Jan 2017 03:08:55 UTC: NOTICE : Using target: stage1
04 Jan 2017 03:08:55 UTC: NOTICE : Source file specification matching setting is: loose
04 Jan 2017 03:08:55 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
04 Jan 2017 03:08:55 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
04 Jan 2017 03:08:55 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170104/tmp/stage1root
04 Jan 2017 03:08:55 UTC: NOTICE : purge(); clearing autoresume ...
04 Jan 2017 03:08:55 UTC: NOTICE : purge(); clearing chroot ...
04 Jan 2017 03:08:55 UTC: NOTICE : Clearing the chroot path ...
04 Jan 2017 03:08:55 UTC: NOTICE : purge(); clearing package cache ...
04 Jan 2017 03:08:55 UTC: NOTICE : purging the pkgcache ...
04 Jan 2017 03:08:55 UTC: NOTICE : purge(); clearing kerncache ...
04 Jan 2017 03:08:55 UTC: NOTICE : --- Running action sequence: unpack
04 Jan 2017 03:08:55 UTC: NOTICE : Clearing the chroot path ...
04 Jan 2017 03:08:55 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
04 Jan 2017 03:08:55 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170104 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
04 Jan 2017 03:08:56 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170104 failed.
04 Jan 2017 03:08:56 UTC: NOTICE : --- Running action sequence: unpack_snapshot
04 Jan 2017 03:08:56 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
04 Jan 2017 03:09:11 UTC: NOTICE : --- Running action sequence: setup_confdir
04 Jan 2017 03:09:11 UTC: NOTICE : --- Running action sequence: portage_overlay
04 Jan 2017 03:09:11 UTC: NOTICE : --- Running action sequence: base_dirs
04 Jan 2017 03:09:11 UTC: NOTICE : --- Running action sequence: bind
04 Jan 2017 03:09:11 UTC: NOTICE : --- Running action sequence: chroot_setup
04 Jan 2017 03:09:11 UTC: NOTICE : Setting up chroot...
04 Jan 2017 03:09:11 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
04 Jan 2017 03:09:11 UTC: WARNING : If your build fails look here first as the possible problem.
04 Jan 2017 03:09:11 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
04 Jan 2017 03:09:11 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
04 Jan 2017 03:09:11 UTC: WARNING : You have been warned.
04 Jan 2017 03:09:11 UTC: NOTICE : --- Running action sequence: setup_environment
04 Jan 2017 03:09:11 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170104/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170104/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170104/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20170104 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
04 Jan 2017 03:09:11 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
04 Jan 2017 03:09:12 UTC: ERROR : CatalystError: Stage build aborting due to error.
04 Jan 2017 03:09:12 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
04 Jan 2017 03:09:12 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.20user 3.90system 0:17.17elapsed 105%CPU (0avgtext+0avgdata 309780maxresident)k
8inputs+1397184outputs (0major+209744minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20170104.MPhShC/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-12-28 3:09 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-12-28 3:09 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
28 Dec 2016 03:08:44 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
28 Dec 2016 03:08:44 UTC: NOTICE : Processing spec file: i686/stage1.spec
28 Dec 2016 03:08:44 UTC: NOTICE : Using target: stage1
28 Dec 2016 03:08:44 UTC: NOTICE : Source file specification matching setting is: loose
28 Dec 2016 03:08:44 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
28 Dec 2016 03:08:44 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
28 Dec 2016 03:08:44 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161228/tmp/stage1root
28 Dec 2016 03:08:44 UTC: NOTICE : purge(); clearing autoresume ...
28 Dec 2016 03:08:44 UTC: NOTICE : purge(); clearing chroot ...
28 Dec 2016 03:08:44 UTC: NOTICE : Clearing the chroot path ...
28 Dec 2016 03:08:44 UTC: NOTICE : purge(); clearing package cache ...
28 Dec 2016 03:08:44 UTC: NOTICE : purging the pkgcache ...
28 Dec 2016 03:08:44 UTC: NOTICE : purge(); clearing kerncache ...
28 Dec 2016 03:08:44 UTC: NOTICE : --- Running action sequence: unpack
28 Dec 2016 03:08:44 UTC: NOTICE : Clearing the chroot path ...
28 Dec 2016 03:08:44 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
28 Dec 2016 03:08:44 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161228 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
28 Dec 2016 03:08:45 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161228 failed.
28 Dec 2016 03:08:45 UTC: NOTICE : --- Running action sequence: unpack_snapshot
28 Dec 2016 03:08:45 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
28 Dec 2016 03:09:00 UTC: NOTICE : --- Running action sequence: setup_confdir
28 Dec 2016 03:09:00 UTC: NOTICE : --- Running action sequence: portage_overlay
28 Dec 2016 03:09:00 UTC: NOTICE : --- Running action sequence: base_dirs
28 Dec 2016 03:09:00 UTC: NOTICE : --- Running action sequence: bind
28 Dec 2016 03:09:00 UTC: NOTICE : --- Running action sequence: chroot_setup
28 Dec 2016 03:09:00 UTC: NOTICE : Setting up chroot...
28 Dec 2016 03:09:00 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
28 Dec 2016 03:09:00 UTC: WARNING : If your build fails look here first as the possible problem.
28 Dec 2016 03:09:00 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
28 Dec 2016 03:09:00 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
28 Dec 2016 03:09:00 UTC: WARNING : You have been warned.
28 Dec 2016 03:09:00 UTC: NOTICE : --- Running action sequence: setup_environment
28 Dec 2016 03:09:00 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161228/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161228/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161228/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161228 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
28 Dec 2016 03:09:00 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
28 Dec 2016 03:09:01 UTC: ERROR : CatalystError: Stage build aborting due to error.
28 Dec 2016 03:09:01 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
28 Dec 2016 03:09:01 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.54user 3.85system 0:17.30elapsed 106%CPU (0avgtext+0avgdata 296552maxresident)k
0inputs+1400584outputs (0major+202664minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161228.LA7vXj/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-12-21 3:09 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-12-21 3:09 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
21 Dec 2016 03:09:00 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
21 Dec 2016 03:09:01 UTC: NOTICE : Processing spec file: i686/stage1.spec
21 Dec 2016 03:09:01 UTC: NOTICE : Using target: stage1
21 Dec 2016 03:09:01 UTC: NOTICE : Source file specification matching setting is: loose
21 Dec 2016 03:09:01 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
21 Dec 2016 03:09:01 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
21 Dec 2016 03:09:01 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161221/tmp/stage1root
21 Dec 2016 03:09:01 UTC: NOTICE : purge(); clearing autoresume ...
21 Dec 2016 03:09:01 UTC: NOTICE : purge(); clearing chroot ...
21 Dec 2016 03:09:01 UTC: NOTICE : Clearing the chroot path ...
21 Dec 2016 03:09:01 UTC: NOTICE : purge(); clearing package cache ...
21 Dec 2016 03:09:01 UTC: NOTICE : purging the pkgcache ...
21 Dec 2016 03:09:01 UTC: NOTICE : purge(); clearing kerncache ...
21 Dec 2016 03:09:01 UTC: NOTICE : --- Running action sequence: unpack
21 Dec 2016 03:09:01 UTC: NOTICE : Clearing the chroot path ...
21 Dec 2016 03:09:01 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
21 Dec 2016 03:09:01 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161221 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
21 Dec 2016 03:09:02 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161221 failed.
21 Dec 2016 03:09:02 UTC: NOTICE : --- Running action sequence: unpack_snapshot
21 Dec 2016 03:09:02 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
21 Dec 2016 03:09:15 UTC: NOTICE : --- Running action sequence: setup_confdir
21 Dec 2016 03:09:15 UTC: NOTICE : --- Running action sequence: portage_overlay
21 Dec 2016 03:09:15 UTC: NOTICE : --- Running action sequence: base_dirs
21 Dec 2016 03:09:15 UTC: NOTICE : --- Running action sequence: bind
21 Dec 2016 03:09:15 UTC: NOTICE : --- Running action sequence: chroot_setup
21 Dec 2016 03:09:15 UTC: NOTICE : Setting up chroot...
21 Dec 2016 03:09:15 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
21 Dec 2016 03:09:15 UTC: WARNING : If your build fails look here first as the possible problem.
21 Dec 2016 03:09:15 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
21 Dec 2016 03:09:15 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
21 Dec 2016 03:09:15 UTC: WARNING : You have been warned.
21 Dec 2016 03:09:15 UTC: NOTICE : --- Running action sequence: setup_environment
21 Dec 2016 03:09:15 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161221/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161221/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161221/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161221 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
21 Dec 2016 03:09:15 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
21 Dec 2016 03:09:15 UTC: ERROR : CatalystError: Stage build aborting due to error.
21 Dec 2016 03:09:15 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
21 Dec 2016 03:09:15 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.45user 3.77system 0:14.69elapsed 123%CPU (0avgtext+0avgdata 306856maxresident)k
0inputs+1400488outputs (0major+209054minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161221.Eoe0NB/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-12-14 3:08 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-12-14 3:08 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
14 Dec 2016 03:08:24 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
14 Dec 2016 03:08:24 UTC: NOTICE : Processing spec file: i686/stage1.spec
14 Dec 2016 03:08:24 UTC: NOTICE : Using target: stage1
14 Dec 2016 03:08:24 UTC: NOTICE : Source file specification matching setting is: loose
14 Dec 2016 03:08:24 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
14 Dec 2016 03:08:24 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
14 Dec 2016 03:08:24 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161214/tmp/stage1root
14 Dec 2016 03:08:24 UTC: NOTICE : purge(); clearing autoresume ...
14 Dec 2016 03:08:24 UTC: NOTICE : purge(); clearing chroot ...
14 Dec 2016 03:08:24 UTC: NOTICE : Clearing the chroot path ...
14 Dec 2016 03:08:24 UTC: NOTICE : purge(); clearing package cache ...
14 Dec 2016 03:08:24 UTC: NOTICE : purging the pkgcache ...
14 Dec 2016 03:08:24 UTC: NOTICE : purge(); clearing kerncache ...
14 Dec 2016 03:08:24 UTC: NOTICE : --- Running action sequence: unpack
14 Dec 2016 03:08:24 UTC: NOTICE : Clearing the chroot path ...
14 Dec 2016 03:08:24 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
14 Dec 2016 03:08:24 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161214 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
14 Dec 2016 03:08:25 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161214 failed.
14 Dec 2016 03:08:25 UTC: NOTICE : --- Running action sequence: unpack_snapshot
14 Dec 2016 03:08:25 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
14 Dec 2016 03:08:40 UTC: NOTICE : --- Running action sequence: setup_confdir
14 Dec 2016 03:08:40 UTC: NOTICE : --- Running action sequence: portage_overlay
14 Dec 2016 03:08:40 UTC: NOTICE : --- Running action sequence: base_dirs
14 Dec 2016 03:08:40 UTC: NOTICE : --- Running action sequence: bind
14 Dec 2016 03:08:40 UTC: NOTICE : --- Running action sequence: chroot_setup
14 Dec 2016 03:08:40 UTC: NOTICE : Setting up chroot...
14 Dec 2016 03:08:40 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
14 Dec 2016 03:08:40 UTC: WARNING : If your build fails look here first as the possible problem.
14 Dec 2016 03:08:40 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
14 Dec 2016 03:08:40 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
14 Dec 2016 03:08:40 UTC: WARNING : You have been warned.
14 Dec 2016 03:08:40 UTC: NOTICE : --- Running action sequence: setup_environment
14 Dec 2016 03:08:40 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161214/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161214/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161214/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161214 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
14 Dec 2016 03:08:40 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
14 Dec 2016 03:08:41 UTC: ERROR : CatalystError: Stage build aborting due to error.
14 Dec 2016 03:08:41 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
14 Dec 2016 03:08:41 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.43user 3.98system 0:17.37elapsed 105%CPU (0avgtext+0avgdata 298816maxresident)k
0inputs+1400160outputs (0major+215083minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161214.CAsZc5/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-12-07 3:08 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-12-07 3:08 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
07 Dec 2016 03:08:41 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
07 Dec 2016 03:08:41 UTC: NOTICE : Processing spec file: i686/stage1.spec
07 Dec 2016 03:08:41 UTC: NOTICE : Using target: stage1
07 Dec 2016 03:08:41 UTC: NOTICE : Source file specification matching setting is: loose
07 Dec 2016 03:08:41 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
07 Dec 2016 03:08:42 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
07 Dec 2016 03:08:42 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161207/tmp/stage1root
07 Dec 2016 03:08:42 UTC: NOTICE : purge(); clearing autoresume ...
07 Dec 2016 03:08:42 UTC: NOTICE : purge(); clearing chroot ...
07 Dec 2016 03:08:42 UTC: NOTICE : Clearing the chroot path ...
07 Dec 2016 03:08:42 UTC: NOTICE : purge(); clearing package cache ...
07 Dec 2016 03:08:42 UTC: NOTICE : purging the pkgcache ...
07 Dec 2016 03:08:42 UTC: NOTICE : purge(); clearing kerncache ...
07 Dec 2016 03:08:42 UTC: NOTICE : --- Running action sequence: unpack
07 Dec 2016 03:08:42 UTC: NOTICE : Clearing the chroot path ...
07 Dec 2016 03:08:42 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
07 Dec 2016 03:08:42 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161207 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
07 Dec 2016 03:08:43 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161207 failed.
07 Dec 2016 03:08:43 UTC: NOTICE : --- Running action sequence: unpack_snapshot
07 Dec 2016 03:08:43 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
07 Dec 2016 03:08:58 UTC: NOTICE : --- Running action sequence: setup_confdir
07 Dec 2016 03:08:58 UTC: NOTICE : --- Running action sequence: portage_overlay
07 Dec 2016 03:08:58 UTC: NOTICE : --- Running action sequence: base_dirs
07 Dec 2016 03:08:58 UTC: NOTICE : --- Running action sequence: bind
07 Dec 2016 03:08:58 UTC: NOTICE : --- Running action sequence: chroot_setup
07 Dec 2016 03:08:58 UTC: NOTICE : Setting up chroot...
07 Dec 2016 03:08:58 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
07 Dec 2016 03:08:58 UTC: WARNING : If your build fails look here first as the possible problem.
07 Dec 2016 03:08:58 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
07 Dec 2016 03:08:58 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
07 Dec 2016 03:08:58 UTC: WARNING : You have been warned.
07 Dec 2016 03:08:58 UTC: NOTICE : --- Running action sequence: setup_environment
07 Dec 2016 03:08:58 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161207/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161207/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161207/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161207 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
07 Dec 2016 03:08:58 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
07 Dec 2016 03:08:59 UTC: ERROR : CatalystError: Stage build aborting due to error.
07 Dec 2016 03:08:59 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
07 Dec 2016 03:08:59 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.41user 3.87system 0:17.39elapsed 105%CPU (0avgtext+0avgdata 296516maxresident)k
8inputs+1418296outputs (0major+206184minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161207.WXKMQF/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-11-30 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-11-30 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
30 Nov 2016 03:01:24 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
30 Nov 2016 03:01:24 UTC: NOTICE : Processing spec file: i686/stage1.spec
30 Nov 2016 03:01:24 UTC: NOTICE : Using target: stage1
30 Nov 2016 03:01:24 UTC: NOTICE : Source file specification matching setting is: loose
30 Nov 2016 03:01:24 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
30 Nov 2016 03:01:24 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
30 Nov 2016 03:01:24 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161130/tmp/stage1root
30 Nov 2016 03:01:24 UTC: NOTICE : purge(); clearing autoresume ...
30 Nov 2016 03:01:24 UTC: NOTICE : purge(); clearing chroot ...
30 Nov 2016 03:01:24 UTC: NOTICE : Clearing the chroot path ...
30 Nov 2016 03:01:24 UTC: NOTICE : purge(); clearing package cache ...
30 Nov 2016 03:01:24 UTC: NOTICE : purging the pkgcache ...
30 Nov 2016 03:01:24 UTC: NOTICE : purge(); clearing kerncache ...
30 Nov 2016 03:01:24 UTC: NOTICE : --- Running action sequence: unpack
30 Nov 2016 03:01:24 UTC: NOTICE : Clearing the chroot path ...
30 Nov 2016 03:01:24 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
30 Nov 2016 03:01:24 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161130 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
30 Nov 2016 03:01:25 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161130 failed.
30 Nov 2016 03:01:25 UTC: NOTICE : --- Running action sequence: unpack_snapshot
30 Nov 2016 03:01:25 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
30 Nov 2016 03:01:38 UTC: NOTICE : --- Running action sequence: setup_confdir
30 Nov 2016 03:01:38 UTC: NOTICE : --- Running action sequence: portage_overlay
30 Nov 2016 03:01:38 UTC: NOTICE : --- Running action sequence: base_dirs
30 Nov 2016 03:01:38 UTC: NOTICE : --- Running action sequence: bind
30 Nov 2016 03:01:38 UTC: NOTICE : --- Running action sequence: chroot_setup
30 Nov 2016 03:01:38 UTC: NOTICE : Setting up chroot...
30 Nov 2016 03:01:38 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
30 Nov 2016 03:01:38 UTC: WARNING : If your build fails look here first as the possible problem.
30 Nov 2016 03:01:38 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
30 Nov 2016 03:01:38 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
30 Nov 2016 03:01:38 UTC: WARNING : You have been warned.
30 Nov 2016 03:01:38 UTC: NOTICE : --- Running action sequence: setup_environment
30 Nov 2016 03:01:38 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161130/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161130/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161130/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161130 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
30 Nov 2016 03:01:38 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
30 Nov 2016 03:01:38 UTC: ERROR : CatalystError: Stage build aborting due to error.
30 Nov 2016 03:01:38 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
30 Nov 2016 03:01:38 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.66user 3.63system 0:14.76elapsed 123%CPU (0avgtext+0avgdata 296528maxresident)k
8inputs+1416680outputs (0major+205678minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161130.UMOJ4i/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-11-23 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-11-23 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
23 Nov 2016 03:01:26 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
23 Nov 2016 03:01:26 UTC: NOTICE : Processing spec file: i686/stage1.spec
23 Nov 2016 03:01:26 UTC: NOTICE : Using target: stage1
23 Nov 2016 03:01:26 UTC: NOTICE : Source file specification matching setting is: loose
23 Nov 2016 03:01:26 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
23 Nov 2016 03:01:27 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
23 Nov 2016 03:01:27 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161123/tmp/stage1root
23 Nov 2016 03:01:27 UTC: NOTICE : purge(); clearing autoresume ...
23 Nov 2016 03:01:27 UTC: NOTICE : purge(); clearing chroot ...
23 Nov 2016 03:01:27 UTC: NOTICE : Clearing the chroot path ...
23 Nov 2016 03:01:27 UTC: NOTICE : purge(); clearing package cache ...
23 Nov 2016 03:01:27 UTC: NOTICE : purging the pkgcache ...
23 Nov 2016 03:01:27 UTC: NOTICE : purge(); clearing kerncache ...
23 Nov 2016 03:01:27 UTC: NOTICE : --- Running action sequence: unpack
23 Nov 2016 03:01:27 UTC: NOTICE : Clearing the chroot path ...
23 Nov 2016 03:01:27 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
23 Nov 2016 03:01:27 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161123 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
23 Nov 2016 03:01:28 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161123 failed.
23 Nov 2016 03:01:28 UTC: NOTICE : --- Running action sequence: unpack_snapshot
23 Nov 2016 03:01:28 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
23 Nov 2016 03:01:37 UTC: NOTICE : --- Running action sequence: setup_confdir
23 Nov 2016 03:01:37 UTC: NOTICE : --- Running action sequence: portage_overlay
23 Nov 2016 03:01:37 UTC: NOTICE : --- Running action sequence: base_dirs
23 Nov 2016 03:01:37 UTC: NOTICE : --- Running action sequence: bind
23 Nov 2016 03:01:37 UTC: NOTICE : --- Running action sequence: chroot_setup
23 Nov 2016 03:01:37 UTC: NOTICE : Setting up chroot...
23 Nov 2016 03:01:37 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
23 Nov 2016 03:01:37 UTC: WARNING : If your build fails look here first as the possible problem.
23 Nov 2016 03:01:37 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
23 Nov 2016 03:01:37 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
23 Nov 2016 03:01:37 UTC: WARNING : You have been warned.
23 Nov 2016 03:01:37 UTC: NOTICE : --- Running action sequence: setup_environment
23 Nov 2016 03:01:37 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161123/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161123/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161123/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161123 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
23 Nov 2016 03:01:37 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
23 Nov 2016 03:01:37 UTC: ERROR : CatalystError: Stage build aborting due to error.
23 Nov 2016 03:01:37 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
23 Nov 2016 03:01:37 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.29user 3.85system 0:11.10elapsed 163%CPU (0avgtext+0avgdata 298768maxresident)k
0inputs+1419024outputs (0major+215447minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161123.2savV8/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-11-16 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-11-16 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
16 Nov 2016 03:01:21 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
16 Nov 2016 03:01:21 UTC: NOTICE : Processing spec file: i686/stage1.spec
16 Nov 2016 03:01:21 UTC: NOTICE : Using target: stage1
16 Nov 2016 03:01:21 UTC: NOTICE : Source file specification matching setting is: loose
16 Nov 2016 03:01:21 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
16 Nov 2016 03:01:22 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
16 Nov 2016 03:01:22 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161116/tmp/stage1root
16 Nov 2016 03:01:22 UTC: NOTICE : purge(); clearing autoresume ...
16 Nov 2016 03:01:22 UTC: NOTICE : purge(); clearing chroot ...
16 Nov 2016 03:01:22 UTC: NOTICE : Clearing the chroot path ...
16 Nov 2016 03:01:22 UTC: NOTICE : purge(); clearing package cache ...
16 Nov 2016 03:01:22 UTC: NOTICE : purging the pkgcache ...
16 Nov 2016 03:01:22 UTC: NOTICE : purge(); clearing kerncache ...
16 Nov 2016 03:01:22 UTC: NOTICE : --- Running action sequence: unpack
16 Nov 2016 03:01:22 UTC: NOTICE : Clearing the chroot path ...
16 Nov 2016 03:01:22 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
16 Nov 2016 03:01:22 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161116 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
16 Nov 2016 03:01:23 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161116 failed.
16 Nov 2016 03:01:23 UTC: NOTICE : --- Running action sequence: unpack_snapshot
16 Nov 2016 03:01:23 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
16 Nov 2016 03:01:35 UTC: NOTICE : --- Running action sequence: setup_confdir
16 Nov 2016 03:01:35 UTC: NOTICE : --- Running action sequence: portage_overlay
16 Nov 2016 03:01:35 UTC: NOTICE : --- Running action sequence: base_dirs
16 Nov 2016 03:01:35 UTC: NOTICE : --- Running action sequence: bind
16 Nov 2016 03:01:35 UTC: NOTICE : --- Running action sequence: chroot_setup
16 Nov 2016 03:01:35 UTC: NOTICE : Setting up chroot...
16 Nov 2016 03:01:35 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
16 Nov 2016 03:01:35 UTC: WARNING : If your build fails look here first as the possible problem.
16 Nov 2016 03:01:35 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
16 Nov 2016 03:01:35 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
16 Nov 2016 03:01:35 UTC: WARNING : You have been warned.
16 Nov 2016 03:01:35 UTC: NOTICE : --- Running action sequence: setup_environment
16 Nov 2016 03:01:35 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161116/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161116/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161116/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161116 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
16 Nov 2016 03:01:35 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
16 Nov 2016 03:01:35 UTC: ERROR : CatalystError: Stage build aborting due to error.
16 Nov 2016 03:01:35 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
16 Nov 2016 03:01:35 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
14.33user 3.77system 0:14.32elapsed 126%CPU (0avgtext+0avgdata 296520maxresident)k
0inputs+1411504outputs (0major+207275minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161116.DIC5Sc/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-11-09 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-11-09 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
09 Nov 2016 03:01:32 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
09 Nov 2016 03:01:32 UTC: NOTICE : Processing spec file: i686/stage1.spec
09 Nov 2016 03:01:32 UTC: NOTICE : Using target: stage1
09 Nov 2016 03:01:32 UTC: NOTICE : Source file specification matching setting is: loose
09 Nov 2016 03:01:32 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
09 Nov 2016 03:01:33 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
09 Nov 2016 03:01:33 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161109/tmp/stage1root
09 Nov 2016 03:01:33 UTC: NOTICE : purge(); clearing autoresume ...
09 Nov 2016 03:01:33 UTC: NOTICE : purge(); clearing chroot ...
09 Nov 2016 03:01:33 UTC: NOTICE : Clearing the chroot path ...
09 Nov 2016 03:01:33 UTC: NOTICE : purge(); clearing package cache ...
09 Nov 2016 03:01:33 UTC: NOTICE : purging the pkgcache ...
09 Nov 2016 03:01:33 UTC: NOTICE : purge(); clearing kerncache ...
09 Nov 2016 03:01:33 UTC: NOTICE : --- Running action sequence: unpack
09 Nov 2016 03:01:33 UTC: NOTICE : Clearing the chroot path ...
09 Nov 2016 03:01:33 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
09 Nov 2016 03:01:33 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161109 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
09 Nov 2016 03:01:34 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161109 failed.
09 Nov 2016 03:01:34 UTC: NOTICE : --- Running action sequence: unpack_snapshot
09 Nov 2016 03:01:34 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
09 Nov 2016 03:01:49 UTC: NOTICE : --- Running action sequence: setup_confdir
09 Nov 2016 03:01:49 UTC: NOTICE : --- Running action sequence: portage_overlay
09 Nov 2016 03:01:49 UTC: NOTICE : --- Running action sequence: base_dirs
09 Nov 2016 03:01:49 UTC: NOTICE : --- Running action sequence: bind
09 Nov 2016 03:01:49 UTC: NOTICE : --- Running action sequence: chroot_setup
09 Nov 2016 03:01:49 UTC: NOTICE : Setting up chroot...
09 Nov 2016 03:01:49 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
09 Nov 2016 03:01:49 UTC: WARNING : If your build fails look here first as the possible problem.
09 Nov 2016 03:01:49 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
09 Nov 2016 03:01:49 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
09 Nov 2016 03:01:49 UTC: WARNING : You have been warned.
09 Nov 2016 03:01:49 UTC: NOTICE : --- Running action sequence: setup_environment
09 Nov 2016 03:01:49 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161109/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161109/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161109/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161109 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
09 Nov 2016 03:01:49 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
09 Nov 2016 03:01:49 UTC: ERROR : CatalystError: Stage build aborting due to error.
09 Nov 2016 03:01:49 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
09 Nov 2016 03:01:49 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.18user 5.15system 0:17.02elapsed 142%CPU (0avgtext+0avgdata 316540maxresident)k
8inputs+1880520outputs (0major+230395minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161109.nz9XZC/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-11-02 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-11-02 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
02 Nov 2016 03:01:38 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
02 Nov 2016 03:01:38 UTC: NOTICE : Processing spec file: i686/stage1.spec
02 Nov 2016 03:01:38 UTC: NOTICE : Using target: stage1
02 Nov 2016 03:01:38 UTC: NOTICE : Source file specification matching setting is: loose
02 Nov 2016 03:01:38 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
02 Nov 2016 03:01:39 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
02 Nov 2016 03:01:39 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161102/tmp/stage1root
02 Nov 2016 03:01:39 UTC: NOTICE : purge(); clearing autoresume ...
02 Nov 2016 03:01:39 UTC: NOTICE : purge(); clearing chroot ...
02 Nov 2016 03:01:39 UTC: NOTICE : Clearing the chroot path ...
02 Nov 2016 03:01:39 UTC: NOTICE : purge(); clearing package cache ...
02 Nov 2016 03:01:39 UTC: NOTICE : purging the pkgcache ...
02 Nov 2016 03:01:39 UTC: NOTICE : purge(); clearing kerncache ...
02 Nov 2016 03:01:39 UTC: NOTICE : --- Running action sequence: unpack
02 Nov 2016 03:01:39 UTC: NOTICE : Clearing the chroot path ...
02 Nov 2016 03:01:39 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
02 Nov 2016 03:01:39 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161102 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
02 Nov 2016 03:01:39 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161102 failed.
02 Nov 2016 03:01:39 UTC: NOTICE : --- Running action sequence: unpack_snapshot
02 Nov 2016 03:01:39 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
02 Nov 2016 03:01:52 UTC: NOTICE : --- Running action sequence: setup_confdir
02 Nov 2016 03:01:52 UTC: NOTICE : --- Running action sequence: portage_overlay
02 Nov 2016 03:01:52 UTC: NOTICE : --- Running action sequence: base_dirs
02 Nov 2016 03:01:52 UTC: NOTICE : --- Running action sequence: bind
02 Nov 2016 03:01:52 UTC: NOTICE : --- Running action sequence: chroot_setup
02 Nov 2016 03:01:52 UTC: NOTICE : Setting up chroot...
02 Nov 2016 03:01:52 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
02 Nov 2016 03:01:52 UTC: WARNING : If your build fails look here first as the possible problem.
02 Nov 2016 03:01:52 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
02 Nov 2016 03:01:52 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
02 Nov 2016 03:01:52 UTC: WARNING : You have been warned.
02 Nov 2016 03:01:52 UTC: NOTICE : --- Running action sequence: setup_environment
02 Nov 2016 03:01:52 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161102/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161102/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161102/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161102 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
02 Nov 2016 03:01:52 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
02 Nov 2016 03:01:53 UTC: ERROR : CatalystError: Stage build aborting due to error.
02 Nov 2016 03:01:53 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
02 Nov 2016 03:01:53 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
18.97user 4.74system 0:14.83elapsed 159%CPU (0avgtext+0avgdata 296640maxresident)k
0inputs+1879608outputs (0major+229535minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161102.3QsneZ/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-10-26 3:02 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-10-26 3:02 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
26 Oct 2016 03:01:46 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
26 Oct 2016 03:01:46 UTC: NOTICE : Processing spec file: i686/stage1.spec
26 Oct 2016 03:01:46 UTC: NOTICE : Using target: stage1
26 Oct 2016 03:01:46 UTC: NOTICE : Source file specification matching setting is: loose
26 Oct 2016 03:01:46 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
26 Oct 2016 03:01:48 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
26 Oct 2016 03:01:48 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161026/tmp/stage1root
26 Oct 2016 03:01:48 UTC: NOTICE : purge(); clearing autoresume ...
26 Oct 2016 03:01:48 UTC: NOTICE : purge(); clearing chroot ...
26 Oct 2016 03:01:48 UTC: NOTICE : Clearing the chroot path ...
26 Oct 2016 03:01:48 UTC: NOTICE : purge(); clearing package cache ...
26 Oct 2016 03:01:48 UTC: NOTICE : purging the pkgcache ...
26 Oct 2016 03:01:48 UTC: NOTICE : purge(); clearing kerncache ...
26 Oct 2016 03:01:48 UTC: NOTICE : --- Running action sequence: unpack
26 Oct 2016 03:01:48 UTC: NOTICE : Clearing the chroot path ...
26 Oct 2016 03:01:48 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
26 Oct 2016 03:01:48 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161026 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
26 Oct 2016 03:01:49 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161026 failed.
26 Oct 2016 03:01:49 UTC: NOTICE : --- Running action sequence: unpack_snapshot
26 Oct 2016 03:01:49 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
26 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: setup_confdir
26 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: portage_overlay
26 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: base_dirs
26 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: bind
26 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: chroot_setup
26 Oct 2016 03:02:03 UTC: NOTICE : Setting up chroot...
26 Oct 2016 03:02:03 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
26 Oct 2016 03:02:03 UTC: WARNING : If your build fails look here first as the possible problem.
26 Oct 2016 03:02:03 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
26 Oct 2016 03:02:03 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
26 Oct 2016 03:02:03 UTC: WARNING : You have been warned.
26 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: setup_environment
26 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161026/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161026/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161026/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161026 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
26 Oct 2016 03:02:03 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
26 Oct 2016 03:02:03 UTC: ERROR : CatalystError: Stage build aborting due to error.
26 Oct 2016 03:02:03 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
26 Oct 2016 03:02:03 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
18.89user 5.05system 0:16.96elapsed 141%CPU (0avgtext+0avgdata 303708maxresident)k
377864inputs+1874456outputs (0major+236424minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161026.EOrPnh/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-10-19 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-10-19 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
19 Oct 2016 03:01:39 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
19 Oct 2016 03:01:39 UTC: NOTICE : Processing spec file: i686/stage1.spec
19 Oct 2016 03:01:39 UTC: NOTICE : Using target: stage1
19 Oct 2016 03:01:39 UTC: NOTICE : Source file specification matching setting is: loose
19 Oct 2016 03:01:39 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
19 Oct 2016 03:01:40 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
19 Oct 2016 03:01:40 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161019/tmp/stage1root
19 Oct 2016 03:01:40 UTC: NOTICE : purge(); clearing autoresume ...
19 Oct 2016 03:01:40 UTC: NOTICE : purge(); clearing chroot ...
19 Oct 2016 03:01:40 UTC: NOTICE : Clearing the chroot path ...
19 Oct 2016 03:01:40 UTC: NOTICE : purge(); clearing package cache ...
19 Oct 2016 03:01:40 UTC: NOTICE : purging the pkgcache ...
19 Oct 2016 03:01:40 UTC: NOTICE : purge(); clearing kerncache ...
19 Oct 2016 03:01:40 UTC: NOTICE : --- Running action sequence: unpack
19 Oct 2016 03:01:40 UTC: NOTICE : Clearing the chroot path ...
19 Oct 2016 03:01:40 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
19 Oct 2016 03:01:40 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161019 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
19 Oct 2016 03:01:41 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161019 failed.
19 Oct 2016 03:01:41 UTC: NOTICE : --- Running action sequence: unpack_snapshot
19 Oct 2016 03:01:41 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
19 Oct 2016 03:01:55 UTC: NOTICE : --- Running action sequence: setup_confdir
19 Oct 2016 03:01:55 UTC: NOTICE : --- Running action sequence: portage_overlay
19 Oct 2016 03:01:55 UTC: NOTICE : --- Running action sequence: base_dirs
19 Oct 2016 03:01:55 UTC: NOTICE : --- Running action sequence: bind
19 Oct 2016 03:01:55 UTC: NOTICE : --- Running action sequence: chroot_setup
19 Oct 2016 03:01:55 UTC: NOTICE : Setting up chroot...
19 Oct 2016 03:01:55 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
19 Oct 2016 03:01:55 UTC: WARNING : If your build fails look here first as the possible problem.
19 Oct 2016 03:01:55 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
19 Oct 2016 03:01:55 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
19 Oct 2016 03:01:55 UTC: WARNING : You have been warned.
19 Oct 2016 03:01:55 UTC: NOTICE : --- Running action sequence: setup_environment
19 Oct 2016 03:01:55 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161019/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161019/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161019/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161019 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
19 Oct 2016 03:01:55 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
19 Oct 2016 03:01:56 UTC: ERROR : CatalystError: Stage build aborting due to error.
19 Oct 2016 03:01:56 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
19 Oct 2016 03:01:58 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.43user 4.96system 0:19.77elapsed 123%CPU (0avgtext+0avgdata 305412maxresident)k
368288inputs+1873136outputs (0major+243050minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161019.dnawCE/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-10-12 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-10-12 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
12 Oct 2016 03:01:31 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
12 Oct 2016 03:01:31 UTC: NOTICE : Processing spec file: i686/stage1.spec
12 Oct 2016 03:01:31 UTC: NOTICE : Using target: stage1
12 Oct 2016 03:01:31 UTC: NOTICE : Source file specification matching setting is: loose
12 Oct 2016 03:01:31 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
12 Oct 2016 03:01:32 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
12 Oct 2016 03:01:32 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161012/tmp/stage1root
12 Oct 2016 03:01:32 UTC: NOTICE : purge(); clearing autoresume ...
12 Oct 2016 03:01:32 UTC: NOTICE : purge(); clearing chroot ...
12 Oct 2016 03:01:32 UTC: NOTICE : Clearing the chroot path ...
12 Oct 2016 03:01:32 UTC: NOTICE : purge(); clearing package cache ...
12 Oct 2016 03:01:32 UTC: NOTICE : purging the pkgcache ...
12 Oct 2016 03:01:32 UTC: NOTICE : purge(); clearing kerncache ...
12 Oct 2016 03:01:32 UTC: NOTICE : --- Running action sequence: unpack
12 Oct 2016 03:01:32 UTC: NOTICE : Clearing the chroot path ...
12 Oct 2016 03:01:32 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
12 Oct 2016 03:01:32 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161012 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
12 Oct 2016 03:01:33 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161012 failed.
12 Oct 2016 03:01:33 UTC: NOTICE : --- Running action sequence: unpack_snapshot
12 Oct 2016 03:01:33 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
12 Oct 2016 03:01:46 UTC: NOTICE : --- Running action sequence: setup_confdir
12 Oct 2016 03:01:46 UTC: NOTICE : --- Running action sequence: portage_overlay
12 Oct 2016 03:01:46 UTC: NOTICE : --- Running action sequence: base_dirs
12 Oct 2016 03:01:46 UTC: NOTICE : --- Running action sequence: bind
12 Oct 2016 03:01:46 UTC: NOTICE : --- Running action sequence: chroot_setup
12 Oct 2016 03:01:46 UTC: NOTICE : Setting up chroot...
12 Oct 2016 03:01:46 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
12 Oct 2016 03:01:46 UTC: WARNING : If your build fails look here first as the possible problem.
12 Oct 2016 03:01:46 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
12 Oct 2016 03:01:46 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
12 Oct 2016 03:01:46 UTC: WARNING : You have been warned.
12 Oct 2016 03:01:46 UTC: NOTICE : --- Running action sequence: setup_environment
12 Oct 2016 03:01:46 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161012/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161012/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161012/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161012 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
12 Oct 2016 03:01:46 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
12 Oct 2016 03:01:47 UTC: ERROR : CatalystError: Stage build aborting due to error.
12 Oct 2016 03:01:47 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
12 Oct 2016 03:01:47 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
20.06user 4.96system 0:15.34elapsed 163%CPU (0avgtext+0avgdata 296620maxresident)k
280inputs+1873144outputs (0major+232932minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161012.UUHpmR/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-10-05 3:02 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-10-05 3:02 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
05 Oct 2016 03:01:46 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
05 Oct 2016 03:01:46 UTC: NOTICE : Processing spec file: i686/stage1.spec
05 Oct 2016 03:01:46 UTC: NOTICE : Using target: stage1
05 Oct 2016 03:01:46 UTC: NOTICE : Source file specification matching setting is: loose
05 Oct 2016 03:01:46 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
05 Oct 2016 03:01:47 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
05 Oct 2016 03:01:47 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161005/tmp/stage1root
05 Oct 2016 03:01:47 UTC: NOTICE : purge(); clearing autoresume ...
05 Oct 2016 03:01:47 UTC: NOTICE : purge(); clearing chroot ...
05 Oct 2016 03:01:47 UTC: NOTICE : Clearing the chroot path ...
05 Oct 2016 03:01:47 UTC: NOTICE : purge(); clearing package cache ...
05 Oct 2016 03:01:47 UTC: NOTICE : purging the pkgcache ...
05 Oct 2016 03:01:47 UTC: NOTICE : purge(); clearing kerncache ...
05 Oct 2016 03:01:47 UTC: NOTICE : --- Running action sequence: unpack
05 Oct 2016 03:01:47 UTC: NOTICE : Clearing the chroot path ...
05 Oct 2016 03:01:47 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
05 Oct 2016 03:01:47 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161005 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
05 Oct 2016 03:01:48 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161005 failed.
05 Oct 2016 03:01:48 UTC: NOTICE : --- Running action sequence: unpack_snapshot
05 Oct 2016 03:01:48 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
05 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: setup_confdir
05 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: portage_overlay
05 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: base_dirs
05 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: bind
05 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: chroot_setup
05 Oct 2016 03:02:03 UTC: NOTICE : Setting up chroot...
05 Oct 2016 03:02:03 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
05 Oct 2016 03:02:03 UTC: WARNING : If your build fails look here first as the possible problem.
05 Oct 2016 03:02:03 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
05 Oct 2016 03:02:03 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
05 Oct 2016 03:02:03 UTC: WARNING : You have been warned.
05 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: setup_environment
05 Oct 2016 03:02:03 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161005/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161005/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161005/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20161005 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
05 Oct 2016 03:02:03 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
05 Oct 2016 03:02:03 UTC: ERROR : CatalystError: Stage build aborting due to error.
05 Oct 2016 03:02:03 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
05 Oct 2016 03:02:03 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.86user 5.02system 0:17.12elapsed 145%CPU (0avgtext+0avgdata 296580maxresident)k
1240inputs+1868880outputs (0major+223002minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20161005.4ff9ez/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-09-28 7:44 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-09-28 7:44 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
28 Sep 2016 07:44:15 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
28 Sep 2016 07:44:15 UTC: NOTICE : Processing spec file: i686/stage1.spec
28 Sep 2016 07:44:15 UTC: NOTICE : Using target: stage1
28 Sep 2016 07:44:15 UTC: NOTICE : Source file specification matching setting is: loose
28 Sep 2016 07:44:15 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
28 Sep 2016 07:44:16 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
28 Sep 2016 07:44:16 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160928/tmp/stage1root
28 Sep 2016 07:44:16 UTC: NOTICE : purge(); clearing autoresume ...
28 Sep 2016 07:44:16 UTC: NOTICE : purge(); clearing chroot ...
28 Sep 2016 07:44:16 UTC: NOTICE : Clearing the chroot path ...
28 Sep 2016 07:44:16 UTC: NOTICE : purge(); clearing package cache ...
28 Sep 2016 07:44:16 UTC: NOTICE : purging the pkgcache ...
28 Sep 2016 07:44:16 UTC: NOTICE : purge(); clearing kerncache ...
28 Sep 2016 07:44:16 UTC: NOTICE : --- Running action sequence: unpack
28 Sep 2016 07:44:16 UTC: NOTICE : Clearing the chroot path ...
28 Sep 2016 07:44:16 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
28 Sep 2016 07:44:16 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160928 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
28 Sep 2016 07:44:17 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160928 failed.
28 Sep 2016 07:44:17 UTC: NOTICE : --- Running action sequence: unpack_snapshot
28 Sep 2016 07:44:17 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
28 Sep 2016 07:44:28 UTC: NOTICE : --- Running action sequence: setup_confdir
28 Sep 2016 07:44:28 UTC: NOTICE : --- Running action sequence: portage_overlay
28 Sep 2016 07:44:28 UTC: NOTICE : --- Running action sequence: base_dirs
28 Sep 2016 07:44:28 UTC: NOTICE : --- Running action sequence: bind
28 Sep 2016 07:44:28 UTC: NOTICE : --- Running action sequence: chroot_setup
28 Sep 2016 07:44:28 UTC: NOTICE : Setting up chroot...
28 Sep 2016 07:44:28 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
28 Sep 2016 07:44:28 UTC: WARNING : If your build fails look here first as the possible problem.
28 Sep 2016 07:44:28 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
28 Sep 2016 07:44:28 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
28 Sep 2016 07:44:28 UTC: WARNING : You have been warned.
28 Sep 2016 07:44:28 UTC: NOTICE : --- Running action sequence: setup_environment
28 Sep 2016 07:44:28 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160928/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160928/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160928/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160928 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
/tmp/chroot-functions.sh: line 25: portageq: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
28 Sep 2016 07:44:28 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
28 Sep 2016 07:44:29 UTC: ERROR : CatalystError: Stage build aborting due to error.
28 Sep 2016 07:44:29 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1295, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1395, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1304, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
28 Sep 2016 07:44:29 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.46user 4.57system 0:13.40elapsed 179%CPU (0avgtext+0avgdata 296616maxresident)k
8inputs+1866056outputs (0major+214843minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160928.9MKo6o/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-09-21 7:29 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-09-21 7:29 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
21 Sep 2016 07:29:39 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
21 Sep 2016 07:29:39 UTC: NOTICE : Processing spec file: i686/stage1.spec
21 Sep 2016 07:29:39 UTC: NOTICE : Using target: stage1
21 Sep 2016 07:29:39 UTC: NOTICE : Source file specification matching setting is: loose
21 Sep 2016 07:29:39 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
21 Sep 2016 07:29:40 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
21 Sep 2016 07:29:40 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160921/tmp/stage1root
21 Sep 2016 07:29:40 UTC: NOTICE : purge(); clearing autoresume ...
21 Sep 2016 07:29:40 UTC: NOTICE : purge(); clearing chroot ...
21 Sep 2016 07:29:40 UTC: NOTICE : Clearing the chroot path ...
21 Sep 2016 07:29:40 UTC: NOTICE : purge(); clearing package cache ...
21 Sep 2016 07:29:40 UTC: NOTICE : purging the pkgcache ...
21 Sep 2016 07:29:40 UTC: NOTICE : purge(); clearing kerncache ...
21 Sep 2016 07:29:40 UTC: NOTICE : --- Running action sequence: unpack
21 Sep 2016 07:29:40 UTC: NOTICE : Clearing the chroot path ...
21 Sep 2016 07:29:40 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
21 Sep 2016 07:29:40 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160921 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
21 Sep 2016 07:29:41 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160921 failed.
21 Sep 2016 07:29:41 UTC: NOTICE : --- Running action sequence: unpack_snapshot
21 Sep 2016 07:29:41 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
21 Sep 2016 07:29:52 UTC: NOTICE : --- Running action sequence: setup_confdir
21 Sep 2016 07:29:52 UTC: NOTICE : --- Running action sequence: portage_overlay
21 Sep 2016 07:29:52 UTC: NOTICE : --- Running action sequence: base_dirs
21 Sep 2016 07:29:52 UTC: NOTICE : --- Running action sequence: bind
21 Sep 2016 07:29:52 UTC: NOTICE : --- Running action sequence: chroot_setup
21 Sep 2016 07:29:52 UTC: NOTICE : Setting up chroot...
21 Sep 2016 07:29:52 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
21 Sep 2016 07:29:52 UTC: WARNING : If your build fails look here first as the possible problem.
21 Sep 2016 07:29:52 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
21 Sep 2016 07:29:52 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
21 Sep 2016 07:29:52 UTC: WARNING : You have been warned.
21 Sep 2016 07:29:52 UTC: NOTICE : --- Running action sequence: setup_environment
21 Sep 2016 07:29:52 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160921/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160921/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160921/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160921 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
21 Sep 2016 07:29:53 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
21 Sep 2016 07:29:53 UTC: ERROR : CatalystError: Stage build aborting due to error.
21 Sep 2016 07:29:53 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
21 Sep 2016 07:29:53 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.12user 4.31system 0:13.68elapsed 171%CPU (0avgtext+0avgdata 296524maxresident)k
8inputs+1864992outputs (0major+218068minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160921.zPFNos/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-09-14 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-09-14 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
14 Sep 2016 03:00:38 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
14 Sep 2016 03:00:38 UTC: NOTICE : Processing spec file: i686/stage1.spec
14 Sep 2016 03:00:38 UTC: NOTICE : Using target: stage1
14 Sep 2016 03:00:38 UTC: NOTICE : Source file specification matching setting is: loose
14 Sep 2016 03:00:38 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
14 Sep 2016 03:00:39 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
14 Sep 2016 03:00:39 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160914/tmp/stage1root
14 Sep 2016 03:00:39 UTC: NOTICE : purge(); clearing autoresume ...
14 Sep 2016 03:00:39 UTC: NOTICE : purge(); clearing chroot ...
14 Sep 2016 03:00:39 UTC: NOTICE : Clearing the chroot path ...
14 Sep 2016 03:00:39 UTC: NOTICE : purge(); clearing package cache ...
14 Sep 2016 03:00:39 UTC: NOTICE : purging the pkgcache ...
14 Sep 2016 03:00:39 UTC: NOTICE : purge(); clearing kerncache ...
14 Sep 2016 03:00:39 UTC: NOTICE : --- Running action sequence: unpack
14 Sep 2016 03:00:39 UTC: NOTICE : Clearing the chroot path ...
14 Sep 2016 03:00:39 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
14 Sep 2016 03:00:39 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160914 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
14 Sep 2016 03:00:39 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160914 failed.
14 Sep 2016 03:00:39 UTC: NOTICE : --- Running action sequence: unpack_snapshot
14 Sep 2016 03:00:39 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
14 Sep 2016 03:00:56 UTC: NOTICE : --- Running action sequence: setup_confdir
14 Sep 2016 03:00:56 UTC: NOTICE : --- Running action sequence: portage_overlay
14 Sep 2016 03:00:56 UTC: NOTICE : --- Running action sequence: base_dirs
14 Sep 2016 03:00:56 UTC: NOTICE : --- Running action sequence: bind
14 Sep 2016 03:00:56 UTC: NOTICE : --- Running action sequence: chroot_setup
14 Sep 2016 03:00:56 UTC: NOTICE : Setting up chroot...
14 Sep 2016 03:00:56 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
14 Sep 2016 03:00:56 UTC: WARNING : If your build fails look here first as the possible problem.
14 Sep 2016 03:00:56 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
14 Sep 2016 03:00:56 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
14 Sep 2016 03:00:56 UTC: WARNING : You have been warned.
14 Sep 2016 03:00:56 UTC: NOTICE : --- Running action sequence: setup_environment
14 Sep 2016 03:00:56 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160914/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160914/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160914/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160914 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
14 Sep 2016 03:00:56 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
14 Sep 2016 03:00:57 UTC: ERROR : CatalystError: Stage build aborting due to error.
14 Sep 2016 03:00:57 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
14 Sep 2016 03:00:57 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.47user 4.59system 0:18.63elapsed 129%CPU (0avgtext+0avgdata 296572maxresident)k
8inputs+1852464outputs (0major+218934minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160914.LW18tm/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-09-07 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-09-07 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
07 Sep 2016 03:00:42 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
07 Sep 2016 03:00:42 UTC: NOTICE : Processing spec file: i686/stage1.spec
07 Sep 2016 03:00:42 UTC: NOTICE : Using target: stage1
07 Sep 2016 03:00:42 UTC: NOTICE : Source file specification matching setting is: loose
07 Sep 2016 03:00:42 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
07 Sep 2016 03:00:42 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
07 Sep 2016 03:00:42 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160907/tmp/stage1root
07 Sep 2016 03:00:42 UTC: NOTICE : purge(); clearing autoresume ...
07 Sep 2016 03:00:42 UTC: NOTICE : purge(); clearing chroot ...
07 Sep 2016 03:00:42 UTC: NOTICE : Clearing the chroot path ...
07 Sep 2016 03:00:42 UTC: NOTICE : purge(); clearing package cache ...
07 Sep 2016 03:00:42 UTC: NOTICE : purging the pkgcache ...
07 Sep 2016 03:00:43 UTC: NOTICE : purge(); clearing kerncache ...
07 Sep 2016 03:00:43 UTC: NOTICE : --- Running action sequence: unpack
07 Sep 2016 03:00:43 UTC: NOTICE : Clearing the chroot path ...
07 Sep 2016 03:00:43 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
07 Sep 2016 03:00:43 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160907 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
07 Sep 2016 03:00:43 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160907 failed.
07 Sep 2016 03:00:43 UTC: NOTICE : --- Running action sequence: unpack_snapshot
07 Sep 2016 03:00:43 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
07 Sep 2016 03:00:59 UTC: NOTICE : --- Running action sequence: setup_confdir
07 Sep 2016 03:00:59 UTC: NOTICE : --- Running action sequence: portage_overlay
07 Sep 2016 03:00:59 UTC: NOTICE : --- Running action sequence: base_dirs
07 Sep 2016 03:00:59 UTC: NOTICE : --- Running action sequence: bind
07 Sep 2016 03:00:59 UTC: NOTICE : --- Running action sequence: chroot_setup
07 Sep 2016 03:00:59 UTC: NOTICE : Setting up chroot...
07 Sep 2016 03:00:59 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
07 Sep 2016 03:00:59 UTC: WARNING : If your build fails look here first as the possible problem.
07 Sep 2016 03:00:59 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
07 Sep 2016 03:00:59 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
07 Sep 2016 03:00:59 UTC: WARNING : You have been warned.
07 Sep 2016 03:00:59 UTC: NOTICE : --- Running action sequence: setup_environment
07 Sep 2016 03:00:59 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160907/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160907/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160907/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160907 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
07 Sep 2016 03:00:59 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
07 Sep 2016 03:00:59 UTC: ERROR : CatalystError: Stage build aborting due to error.
07 Sep 2016 03:00:59 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
07 Sep 2016 03:00:59 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.64user 4.54system 0:17.85elapsed 135%CPU (0avgtext+0avgdata 296600maxresident)k
8inputs+1852552outputs (0major+223208minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160907.WVezKh/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-08-31 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-08-31 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
31 Aug 2016 03:00:43 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
31 Aug 2016 03:00:43 UTC: NOTICE : Processing spec file: i686/stage1.spec
31 Aug 2016 03:00:43 UTC: NOTICE : Using target: stage1
31 Aug 2016 03:00:43 UTC: NOTICE : Source file specification matching setting is: loose
31 Aug 2016 03:00:43 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
31 Aug 2016 03:00:44 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
31 Aug 2016 03:00:44 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160831/tmp/stage1root
31 Aug 2016 03:00:44 UTC: NOTICE : purge(); clearing autoresume ...
31 Aug 2016 03:00:44 UTC: NOTICE : purge(); clearing chroot ...
31 Aug 2016 03:00:44 UTC: NOTICE : Clearing the chroot path ...
31 Aug 2016 03:00:44 UTC: NOTICE : purge(); clearing package cache ...
31 Aug 2016 03:00:44 UTC: NOTICE : purging the pkgcache ...
31 Aug 2016 03:00:44 UTC: NOTICE : purge(); clearing kerncache ...
31 Aug 2016 03:00:44 UTC: NOTICE : --- Running action sequence: unpack
31 Aug 2016 03:00:44 UTC: NOTICE : Clearing the chroot path ...
31 Aug 2016 03:00:44 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
31 Aug 2016 03:00:44 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160831 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
31 Aug 2016 03:00:45 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160831 failed.
31 Aug 2016 03:00:45 UTC: NOTICE : --- Running action sequence: unpack_snapshot
31 Aug 2016 03:00:45 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
31 Aug 2016 03:00:59 UTC: NOTICE : --- Running action sequence: setup_confdir
31 Aug 2016 03:00:59 UTC: NOTICE : --- Running action sequence: portage_overlay
31 Aug 2016 03:00:59 UTC: NOTICE : --- Running action sequence: base_dirs
31 Aug 2016 03:00:59 UTC: NOTICE : --- Running action sequence: bind
31 Aug 2016 03:00:59 UTC: NOTICE : --- Running action sequence: chroot_setup
31 Aug 2016 03:00:59 UTC: NOTICE : Setting up chroot...
31 Aug 2016 03:00:59 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
31 Aug 2016 03:00:59 UTC: WARNING : If your build fails look here first as the possible problem.
31 Aug 2016 03:00:59 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
31 Aug 2016 03:00:59 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
31 Aug 2016 03:00:59 UTC: WARNING : You have been warned.
31 Aug 2016 03:00:59 UTC: NOTICE : --- Running action sequence: setup_environment
31 Aug 2016 03:00:59 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160831/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160831/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160831/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160831 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
31 Aug 2016 03:00:59 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
31 Aug 2016 03:00:59 UTC: ERROR : CatalystError: Stage build aborting due to error.
31 Aug 2016 03:00:59 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
31 Aug 2016 03:00:59 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
20.06user 4.61system 0:16.18elapsed 152%CPU (0avgtext+0avgdata 296716maxresident)k
536inputs+1845384outputs (14major+217133minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160831.MAaF3E/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-08-24 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-08-24 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
24 Aug 2016 03:00:38 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
24 Aug 2016 03:00:38 UTC: NOTICE : Processing spec file: i686/stage1.spec
24 Aug 2016 03:00:38 UTC: NOTICE : Using target: stage1
24 Aug 2016 03:00:38 UTC: NOTICE : Source file specification matching setting is: loose
24 Aug 2016 03:00:38 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
24 Aug 2016 03:00:39 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
24 Aug 2016 03:00:39 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160824/tmp/stage1root
24 Aug 2016 03:00:39 UTC: NOTICE : purge(); clearing autoresume ...
24 Aug 2016 03:00:39 UTC: NOTICE : purge(); clearing chroot ...
24 Aug 2016 03:00:39 UTC: NOTICE : Clearing the chroot path ...
24 Aug 2016 03:00:39 UTC: NOTICE : purge(); clearing package cache ...
24 Aug 2016 03:00:39 UTC: NOTICE : purging the pkgcache ...
24 Aug 2016 03:00:39 UTC: NOTICE : purge(); clearing kerncache ...
24 Aug 2016 03:00:39 UTC: NOTICE : --- Running action sequence: unpack
24 Aug 2016 03:00:39 UTC: NOTICE : Clearing the chroot path ...
24 Aug 2016 03:00:39 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
24 Aug 2016 03:00:39 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160824 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
24 Aug 2016 03:00:39 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160824 failed.
24 Aug 2016 03:00:39 UTC: NOTICE : --- Running action sequence: unpack_snapshot
24 Aug 2016 03:00:39 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
24 Aug 2016 03:00:55 UTC: NOTICE : --- Running action sequence: setup_confdir
24 Aug 2016 03:00:55 UTC: NOTICE : --- Running action sequence: portage_overlay
24 Aug 2016 03:00:55 UTC: NOTICE : --- Running action sequence: base_dirs
24 Aug 2016 03:00:55 UTC: NOTICE : --- Running action sequence: bind
24 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: chroot_setup
24 Aug 2016 03:00:56 UTC: NOTICE : Setting up chroot...
24 Aug 2016 03:00:56 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
24 Aug 2016 03:00:56 UTC: WARNING : If your build fails look here first as the possible problem.
24 Aug 2016 03:00:56 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
24 Aug 2016 03:00:56 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
24 Aug 2016 03:00:56 UTC: WARNING : You have been warned.
24 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: setup_environment
24 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160824/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160824/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160824/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160824 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
24 Aug 2016 03:00:56 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
24 Aug 2016 03:00:56 UTC: ERROR : CatalystError: Stage build aborting due to error.
24 Aug 2016 03:00:56 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
24 Aug 2016 03:00:56 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.67user 4.78system 0:18.04elapsed 135%CPU (0avgtext+0avgdata 301568maxresident)k
2640inputs+1847992outputs (0major+253673minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160824.EYLuk5/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-08-17 3:00 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-08-17 3:00 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
17 Aug 2016 03:00:39 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
17 Aug 2016 03:00:39 UTC: NOTICE : Processing spec file: i686/stage1.spec
17 Aug 2016 03:00:39 UTC: NOTICE : Using target: stage1
17 Aug 2016 03:00:39 UTC: NOTICE : Source file specification matching setting is: loose
17 Aug 2016 03:00:39 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
17 Aug 2016 03:00:41 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
17 Aug 2016 03:00:41 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160817/tmp/stage1root
17 Aug 2016 03:00:41 UTC: NOTICE : purge(); clearing autoresume ...
17 Aug 2016 03:00:41 UTC: NOTICE : purge(); clearing chroot ...
17 Aug 2016 03:00:41 UTC: NOTICE : Clearing the chroot path ...
17 Aug 2016 03:00:41 UTC: NOTICE : purge(); clearing package cache ...
17 Aug 2016 03:00:41 UTC: NOTICE : purging the pkgcache ...
17 Aug 2016 03:00:41 UTC: NOTICE : purge(); clearing kerncache ...
17 Aug 2016 03:00:41 UTC: NOTICE : --- Running action sequence: unpack
17 Aug 2016 03:00:41 UTC: NOTICE : Clearing the chroot path ...
17 Aug 2016 03:00:41 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
17 Aug 2016 03:00:41 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160817 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
17 Aug 2016 03:00:42 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160817 failed.
17 Aug 2016 03:00:42 UTC: NOTICE : --- Running action sequence: unpack_snapshot
17 Aug 2016 03:00:42 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
17 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: setup_confdir
17 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: portage_overlay
17 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: base_dirs
17 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: bind
17 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: chroot_setup
17 Aug 2016 03:00:56 UTC: NOTICE : Setting up chroot...
17 Aug 2016 03:00:56 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
17 Aug 2016 03:00:56 UTC: WARNING : If your build fails look here first as the possible problem.
17 Aug 2016 03:00:56 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
17 Aug 2016 03:00:56 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
17 Aug 2016 03:00:56 UTC: WARNING : You have been warned.
17 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: setup_environment
17 Aug 2016 03:00:56 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160817/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160817/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160817/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160817 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
17 Aug 2016 03:00:56 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
17 Aug 2016 03:00:57 UTC: ERROR : CatalystError: Stage build aborting due to error.
17 Aug 2016 03:00:57 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
17 Aug 2016 03:00:57 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.33user 4.60system 0:17.29elapsed 138%CPU (0avgtext+0avgdata 296508maxresident)k
348784inputs+1848768outputs (0major+231088minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160817.LN6CEf/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-08-10 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-08-10 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
10 Aug 2016 03:00:59 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
10 Aug 2016 03:01:00 UTC: NOTICE : Processing spec file: i686/stage1.spec
10 Aug 2016 03:01:00 UTC: NOTICE : Using target: stage1
10 Aug 2016 03:01:00 UTC: NOTICE : Source file specification matching setting is: loose
10 Aug 2016 03:01:00 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
10 Aug 2016 03:01:02 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
10 Aug 2016 03:01:02 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160810/tmp/stage1root
10 Aug 2016 03:01:02 UTC: NOTICE : purge(); clearing autoresume ...
10 Aug 2016 03:01:02 UTC: NOTICE : purge(); clearing chroot ...
10 Aug 2016 03:01:02 UTC: NOTICE : Clearing the chroot path ...
10 Aug 2016 03:01:02 UTC: NOTICE : purge(); clearing package cache ...
10 Aug 2016 03:01:02 UTC: NOTICE : purging the pkgcache ...
10 Aug 2016 03:01:02 UTC: NOTICE : purge(); clearing kerncache ...
10 Aug 2016 03:01:02 UTC: NOTICE : --- Running action sequence: unpack
10 Aug 2016 03:01:02 UTC: NOTICE : Clearing the chroot path ...
10 Aug 2016 03:01:02 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
10 Aug 2016 03:01:02 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160810 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
10 Aug 2016 03:01:03 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160810 failed.
10 Aug 2016 03:01:03 UTC: NOTICE : --- Running action sequence: unpack_snapshot
10 Aug 2016 03:01:03 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
10 Aug 2016 03:01:17 UTC: NOTICE : --- Running action sequence: setup_confdir
10 Aug 2016 03:01:17 UTC: NOTICE : --- Running action sequence: portage_overlay
10 Aug 2016 03:01:17 UTC: NOTICE : --- Running action sequence: base_dirs
10 Aug 2016 03:01:17 UTC: NOTICE : --- Running action sequence: bind
10 Aug 2016 03:01:17 UTC: NOTICE : --- Running action sequence: chroot_setup
10 Aug 2016 03:01:17 UTC: NOTICE : Setting up chroot...
10 Aug 2016 03:01:17 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
10 Aug 2016 03:01:17 UTC: WARNING : If your build fails look here first as the possible problem.
10 Aug 2016 03:01:17 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
10 Aug 2016 03:01:17 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
10 Aug 2016 03:01:17 UTC: WARNING : You have been warned.
10 Aug 2016 03:01:17 UTC: NOTICE : --- Running action sequence: setup_environment
10 Aug 2016 03:01:17 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160810/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160810/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160810/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160810 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
10 Aug 2016 03:01:17 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
10 Aug 2016 03:01:17 UTC: ERROR : CatalystError: Stage build aborting due to error.
10 Aug 2016 03:01:17 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
10 Aug 2016 03:01:17 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.62user 4.26system 0:18.06elapsed 132%CPU (0avgtext+0avgdata 296612maxresident)k
347656inputs+1843440outputs (0major+224976minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160810.azCBEF/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-08-03 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-08-03 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
03 Aug 2016 03:01:30 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
03 Aug 2016 03:01:30 UTC: NOTICE : Processing spec file: i686/stage1.spec
03 Aug 2016 03:01:30 UTC: NOTICE : Using target: stage1
03 Aug 2016 03:01:30 UTC: NOTICE : Source file specification matching setting is: loose
03 Aug 2016 03:01:30 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
03 Aug 2016 03:01:33 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
03 Aug 2016 03:01:33 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160803/tmp/stage1root
03 Aug 2016 03:01:33 UTC: NOTICE : purge(); clearing autoresume ...
03 Aug 2016 03:01:33 UTC: NOTICE : purge(); clearing chroot ...
03 Aug 2016 03:01:33 UTC: NOTICE : Clearing the chroot path ...
03 Aug 2016 03:01:33 UTC: NOTICE : purge(); clearing package cache ...
03 Aug 2016 03:01:33 UTC: NOTICE : purging the pkgcache ...
03 Aug 2016 03:01:33 UTC: NOTICE : purge(); clearing kerncache ...
03 Aug 2016 03:01:33 UTC: NOTICE : --- Running action sequence: unpack
03 Aug 2016 03:01:33 UTC: NOTICE : Clearing the chroot path ...
03 Aug 2016 03:01:33 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
03 Aug 2016 03:01:33 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160803 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
03 Aug 2016 03:01:34 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160803 failed.
03 Aug 2016 03:01:34 UTC: NOTICE : --- Running action sequence: unpack_snapshot
03 Aug 2016 03:01:34 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
03 Aug 2016 03:01:45 UTC: NOTICE : --- Running action sequence: setup_confdir
03 Aug 2016 03:01:45 UTC: NOTICE : --- Running action sequence: portage_overlay
03 Aug 2016 03:01:45 UTC: NOTICE : --- Running action sequence: base_dirs
03 Aug 2016 03:01:45 UTC: NOTICE : --- Running action sequence: bind
03 Aug 2016 03:01:45 UTC: NOTICE : --- Running action sequence: chroot_setup
03 Aug 2016 03:01:45 UTC: NOTICE : Setting up chroot...
03 Aug 2016 03:01:45 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
03 Aug 2016 03:01:45 UTC: WARNING : If your build fails look here first as the possible problem.
03 Aug 2016 03:01:45 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
03 Aug 2016 03:01:45 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
03 Aug 2016 03:01:45 UTC: WARNING : You have been warned.
03 Aug 2016 03:01:45 UTC: NOTICE : --- Running action sequence: setup_environment
03 Aug 2016 03:01:45 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160803/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160803/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160803/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160803 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
03 Aug 2016 03:01:45 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
03 Aug 2016 03:01:45 UTC: ERROR : CatalystError: Stage build aborting due to error.
03 Aug 2016 03:01:45 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
03 Aug 2016 03:01:45 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
20.09user 4.74system 0:15.53elapsed 159%CPU (0avgtext+0avgdata 296636maxresident)k
347456inputs+1842664outputs (0major+215553minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160803.2fTnVF/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-07-27 3:03 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-07-27 3:03 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
27 Jul 2016 03:01:58 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
27 Jul 2016 03:01:58 UTC: NOTICE : Processing spec file: i686/stage1.spec
27 Jul 2016 03:01:58 UTC: NOTICE : Using target: stage1
27 Jul 2016 03:01:58 UTC: NOTICE : Source file specification matching setting is: loose
27 Jul 2016 03:01:58 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
27 Jul 2016 03:01:59 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
27 Jul 2016 03:01:59 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160727/tmp/stage1root
27 Jul 2016 03:01:59 UTC: NOTICE : purge(); clearing autoresume ...
27 Jul 2016 03:01:59 UTC: NOTICE : purge(); clearing chroot ...
27 Jul 2016 03:01:59 UTC: NOTICE : Clearing the chroot path ...
27 Jul 2016 03:01:59 UTC: NOTICE : purge(); clearing package cache ...
27 Jul 2016 03:01:59 UTC: NOTICE : purging the pkgcache ...
27 Jul 2016 03:01:59 UTC: NOTICE : purge(); clearing kerncache ...
27 Jul 2016 03:01:59 UTC: NOTICE : --- Running action sequence: unpack
27 Jul 2016 03:01:59 UTC: NOTICE : Clearing the chroot path ...
27 Jul 2016 03:01:59 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
27 Jul 2016 03:01:59 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160727 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
27 Jul 2016 03:02:00 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160727 failed.
27 Jul 2016 03:02:00 UTC: NOTICE : --- Running action sequence: unpack_snapshot
27 Jul 2016 03:02:00 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
27 Jul 2016 03:03:10 UTC: NOTICE : --- Running action sequence: setup_confdir
27 Jul 2016 03:03:10 UTC: NOTICE : --- Running action sequence: portage_overlay
27 Jul 2016 03:03:10 UTC: NOTICE : --- Running action sequence: base_dirs
27 Jul 2016 03:03:10 UTC: NOTICE : --- Running action sequence: bind
27 Jul 2016 03:03:10 UTC: NOTICE : --- Running action sequence: chroot_setup
27 Jul 2016 03:03:10 UTC: NOTICE : Setting up chroot...
27 Jul 2016 03:03:10 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
27 Jul 2016 03:03:10 UTC: WARNING : If your build fails look here first as the possible problem.
27 Jul 2016 03:03:10 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
27 Jul 2016 03:03:10 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
27 Jul 2016 03:03:10 UTC: WARNING : You have been warned.
27 Jul 2016 03:03:10 UTC: NOTICE : --- Running action sequence: setup_environment
27 Jul 2016 03:03:10 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160727/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160727/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160727/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160727 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
27 Jul 2016 03:03:10 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
27 Jul 2016 03:03:10 UTC: ERROR : CatalystError: Stage build aborting due to error.
27 Jul 2016 03:03:10 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
27 Jul 2016 03:03:10 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
20.63user 5.01system 1:12.44elapsed 35%CPU (0avgtext+0avgdata 337516maxresident)k
608inputs+1844032outputs (0major+240577minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160727.0mxKUf/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-07-20 3:01 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-07-20 3:01 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
20 Jul 2016 03:00:51 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
20 Jul 2016 03:00:51 UTC: NOTICE : Processing spec file: i686/stage1.spec
20 Jul 2016 03:00:51 UTC: NOTICE : Using target: stage1
20 Jul 2016 03:00:51 UTC: NOTICE : Source file specification matching setting is: loose
20 Jul 2016 03:00:51 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'tpxz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
20 Jul 2016 03:00:52 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
20 Jul 2016 03:00:52 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160720/tmp/stage1root
20 Jul 2016 03:00:52 UTC: NOTICE : purge(); clearing autoresume ...
20 Jul 2016 03:00:52 UTC: NOTICE : purge(); clearing chroot ...
20 Jul 2016 03:00:52 UTC: NOTICE : Clearing the chroot path ...
20 Jul 2016 03:00:52 UTC: NOTICE : purge(); clearing package cache ...
20 Jul 2016 03:00:52 UTC: NOTICE : purging the pkgcache ...
20 Jul 2016 03:00:52 UTC: NOTICE : purge(); clearing kerncache ...
20 Jul 2016 03:00:52 UTC: NOTICE : --- Running action sequence: unpack
20 Jul 2016 03:00:52 UTC: NOTICE : Clearing the chroot path ...
20 Jul 2016 03:00:52 UTC: NOTICE : Starting auto from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
20 Jul 2016 03:00:52 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160720 (this may take some time) ..
Index and archive differ as to next file: ./var/tmp/.keep vs ./var/tmp/portage/._unmerge_/
tar: Child returned status 1
tar: Error is not recoverable: exiting now
20 Jul 2016 03:00:52 UTC: ERROR : 'pixz' extraction of /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160720 failed.
20 Jul 2016 03:00:52 UTC: NOTICE : --- Running action sequence: unpack_snapshot
20 Jul 2016 03:00:52 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
20 Jul 2016 03:01:06 UTC: NOTICE : --- Running action sequence: setup_confdir
20 Jul 2016 03:01:06 UTC: NOTICE : --- Running action sequence: portage_overlay
20 Jul 2016 03:01:06 UTC: NOTICE : --- Running action sequence: base_dirs
20 Jul 2016 03:01:06 UTC: NOTICE : --- Running action sequence: bind
20 Jul 2016 03:01:06 UTC: NOTICE : --- Running action sequence: chroot_setup
20 Jul 2016 03:01:06 UTC: NOTICE : Setting up chroot...
20 Jul 2016 03:01:06 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
20 Jul 2016 03:01:06 UTC: WARNING : If your build fails look here first as the possible problem.
20 Jul 2016 03:01:06 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
20 Jul 2016 03:01:06 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
20 Jul 2016 03:01:06 UTC: WARNING : You have been warned.
20 Jul 2016 03:01:07 UTC: NOTICE : --- Running action sequence: setup_environment
20 Jul 2016 03:01:07 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160720/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160720/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160720/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160720 /tmp/stage1-chroot.sh
/tmp/chroot-functions.sh: line 4: eselect: command not found
./tmp/stage1-chroot.sh: /tmp/build.py: /usr/bin/python: bad interpreter: No such file or directory
./tmp/stage1-chroot.sh: line 10: portageq: command not found
Your profile seems to be broken.
Could not build a list of build packages.
Double check your /etc/portage/make.profile link and the 'packages' files.
20 Jul 2016 03:01:07 UTC: ERROR : CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
20 Jul 2016 03:01:08 UTC: ERROR : CatalystError: Stage build aborting due to error.
20 Jul 2016 03:01:08 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1293, in run_local
env=self.env)
File "/usr/lib64/python3.4/site-packages/catalyst/support.py", line 54, in cmd
print_traceback=False)
catalyst.support.CatalystError: cmd(['/usr/share/catalyst/targets/stage1/stage1-controller.sh', 'run']) exited 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1393, in run
getattr(self, x)()
File "/usr/lib64/python3.4/site-packages/catalyst/base/stagebase.py", line 1302, in run_local
print_traceback=False)
catalyst.support.CatalystError: Stage build aborting due to error.
20 Jul 2016 03:01:08 UTC: NOTICE : Cleaning up... Running unbind()
Command exited with non-zero status 2
19.23user 4.36system 0:17.26elapsed 136%CPU (0avgtext+0avgdata 308924maxresident)k
296inputs+1846424outputs (0major+234571minor)pagefaults 0swaps
Full build log at /home/release/tmp/run/catalyst-auto.20160720.FcFbTG/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-05-18 3:02 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-05-18 3:02 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
18 May 2016 03:01:45 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
18 May 2016 03:01:45 UTC: NOTICE : Using target: stage1
18 May 2016 03:01:45 UTC: NOTICE : Source file specification matching setting is: loose
18 May 2016 03:01:45 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
18 May 2016 03:01:46 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
18 May 2016 03:01:46 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160518/tmp/stage1root
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
18 May 2016 03:01:56 UTC: NOTICE : purge(); clearing autoresume ...
18 May 2016 03:01:56 UTC: NOTICE : purge(); clearing chroot ...
18 May 2016 03:01:56 UTC: NOTICE : Clearing the chroot path ...
18 May 2016 03:01:56 UTC: NOTICE : purge(); clearing package cache ...
18 May 2016 03:01:56 UTC: NOTICE : purging the pkgcache ...
18 May 2016 03:01:56 UTC: NOTICE : purge(); clearing kerncache ...
18 May 2016 03:01:56 UTC: NOTICE : --- Running action sequence: unpack
18 May 2016 03:01:56 UTC: NOTICE : Clearing the chroot path ...
18 May 2016 03:01:56 UTC: NOTICE : Starting None from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
18 May 2016 03:01:56 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160518 (this may take some time) ..
18 May 2016 03:01:59 UTC: NOTICE : --- Running action sequence: unpack_snapshot
18 May 2016 03:01:59 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
18 May 2016 03:02:12 UTC: NOTICE : --- Running action sequence: setup_confdir
18 May 2016 03:02:12 UTC: NOTICE : --- Running action sequence: portage_overlay
18 May 2016 03:02:12 UTC: NOTICE : --- Running action sequence: base_dirs
18 May 2016 03:02:12 UTC: NOTICE : --- Running action sequence: bind
18 May 2016 03:02:12 UTC: NOTICE : --- Running action sequence: chroot_setup
18 May 2016 03:02:12 UTC: NOTICE : Setting up chroot...
18 May 2016 03:02:12 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
18 May 2016 03:02:12 UTC: WARNING : If your build fails look here first as the possible problem.
18 May 2016 03:02:12 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
18 May 2016 03:02:12 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
18 May 2016 03:02:12 UTC: WARNING : You have been warned.
18 May 2016 03:02:12 UTC: NOTICE : --- Running action sequence: setup_environment
18 May 2016 03:02:12 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160518/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160518/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160518/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160518 /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
[ebuild U ] sys-libs/timezone-data-2016c [2016a]
[ebuild U ] sys-apps/man-pages-4.05 [4.04]
[ebuild U ] dev-libs/openssl-1.0.2h [1.0.2g-r2]
[ebuild U ] virtual/perl-File-Temp-0.230.400-r4 [0.230.400-r3]
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by net-misc/openssh-7.2_p2::gentoo[ssl,-static]
# required by virtual/ssh-0::gentoo[-minimal]
# required by @system
# required by @world (argument)
>=dev-libs/openssl-1.0.2h bindist
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
18 May 2016 03:02:58 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
18 May 2016 03:02:58 UTC: ERROR : CatalystError: Stage build aborting due to error.
18 May 2016 03:02:58 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1413, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1322, in run_local
print_traceback=False)
CatalystError
18 May 2016 03:02:58 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.XVGEK3/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2016-05-11 3:02 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2016-05-11 3:02 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
11 May 2016 03:01:43 UTC: NOTICE : Loading configuration file: /etc/catalyst/release/x86-auto.conf
11 May 2016 03:01:43 UTC: NOTICE : Using target: stage1
11 May 2016 03:01:43 UTC: NOTICE : Source file specification matching setting is: loose
11 May 2016 03:01:43 UTC: NOTICE : Accepted source file extensions search order: ['tar', 'tar.xz', 'xz', 'tar.bz2', 'bz2', 'tbz2', 'tar.gz', 'gz']
11 May 2016 03:01:44 UTC: NOTICE : Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
11 May 2016 03:01:44 UTC: NOTICE : stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160511/tmp/stage1root
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
11 May 2016 03:01:54 UTC: NOTICE : purge(); clearing autoresume ...
11 May 2016 03:01:54 UTC: NOTICE : purge(); clearing chroot ...
11 May 2016 03:01:54 UTC: NOTICE : Clearing the chroot path ...
11 May 2016 03:01:54 UTC: NOTICE : purge(); clearing package cache ...
11 May 2016 03:01:54 UTC: NOTICE : purging the pkgcache ...
11 May 2016 03:01:54 UTC: NOTICE : purge(); clearing kerncache ...
11 May 2016 03:01:54 UTC: NOTICE : --- Running action sequence: unpack
11 May 2016 03:01:54 UTC: NOTICE : Clearing the chroot path ...
11 May 2016 03:01:54 UTC: NOTICE : Starting None from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.xz
11 May 2016 03:01:54 UTC: NOTICE : to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160511 (this may take some time) ..
11 May 2016 03:01:57 UTC: NOTICE : --- Running action sequence: unpack_snapshot
11 May 2016 03:01:57 UTC: NOTICE : Unpacking portage tree (this can take a long time) ...
11 May 2016 03:02:10 UTC: NOTICE : --- Running action sequence: setup_confdir
11 May 2016 03:02:10 UTC: NOTICE : --- Running action sequence: portage_overlay
11 May 2016 03:02:10 UTC: NOTICE : --- Running action sequence: base_dirs
11 May 2016 03:02:10 UTC: NOTICE : --- Running action sequence: bind
11 May 2016 03:02:10 UTC: NOTICE : --- Running action sequence: chroot_setup
11 May 2016 03:02:10 UTC: NOTICE : Setting up chroot...
11 May 2016 03:02:10 UTC: WARNING : Overriding certain env variables may cause catastrophic failure.
11 May 2016 03:02:10 UTC: WARNING : If your build fails look here first as the possible problem.
11 May 2016 03:02:10 UTC: WARNING : Catalyst assumes you know what you are doing when setting these variables.
11 May 2016 03:02:10 UTC: WARNING : Catalyst Maintainers use VERY minimal envscripts, if used at all.
11 May 2016 03:02:10 UTC: WARNING : You have been warned.
11 May 2016 03:02:10 UTC: NOTICE : --- Running action sequence: setup_environment
11 May 2016 03:02:10 UTC: NOTICE : --- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160511/tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160511/tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160511/tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot:
setarch linux32 chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20160511 /tmp/stage1-chroot.sh
>>> Regenerating /etc/ld.so.cache...
Adding USE="${USE} build" to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.26::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.26::gentoo
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
[ebuild U ] sys-libs/timezone-data-2016c [2016a]
[ebuild U ] sys-apps/man-pages-4.05 [4.04]
[ebuild U ] dev-libs/openssl-1.0.2h [1.0.2g-r2]
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
# required by net-misc/openssh-7.2_p2::gentoo[ssl,-static]
# required by virtual/ssh-0::gentoo[-minimal]
# required by @system
# required by @world (argument)
>=dev-libs/openssl-1.0.2h bindist
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
11 May 2016 03:02:53 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
11 May 2016 03:02:53 UTC: ERROR : CatalystError: Stage build aborting due to error.
11 May 2016 03:02:53 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1413, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1322, in run_local
print_traceback=False)
CatalystError
11 May 2016 03:02:53 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.cITG9p/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-12-23 3:05 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-12-23 3:05 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 21993 bytes --]
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/fowners to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/doconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/eqawarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/fperms to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/newconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/dolib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/doenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/dolib to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/prepall to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/dosed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/bsd/sed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/prepallman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/einfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/newlib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/newman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/doins to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/xattr/install to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/prepalldocs to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/prepstrip to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/dolib.so to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/doheader to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/dohtml to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/dohard to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/prepman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/doinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/newinitd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/newdoc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/eerror to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/prepinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/newexe to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/dosym to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/ewarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/emake to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/newenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/dosbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/portageq to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-helpers/newsbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-ipc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild-ipc.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/phase-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/check-implicit-pointer-usage.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/xattr-helper.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/helper-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/chpathtool.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/bashrc-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/binhost-snapshot to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/isolated-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/socks5-server.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/install.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/filter-bash-environment.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/eapi.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/clean_locks to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/glsa-check to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/dohtml.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/xpak-helper.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/save-ebuild-env.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/ebuild.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/python3.4/lock-helper.py to 755
running install_scripts_sbin
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/scripts/sbin/etc-update -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/scripts/sbin/archive-conf -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/scripts/sbin/emaint -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/scripts/sbin/env-update -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/scripts/sbin/fixpackages -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/scripts/sbin/dispatch-conf -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/scripts/sbin/regenworld -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4/etc-update to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4/archive-conf to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4/emaint to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4/env-update to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4/fixpackages to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4/dispatch-conf to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python-exec/python3.4/regenworld to 755
running install_data
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/man
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/ebuild.5 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/make.conf.5 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/portage.5 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/xpak.5 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man5
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/emaint.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/emerge.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/quickpkg.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/emirrordist.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/repoman.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/egencache.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/man1
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/man/ru
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/man/ru/man5
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/ru/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/ru/man5
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/ru/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/ru/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/ru/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/ru/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1-python3_4/man/ru/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/man/ru/man1
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/etc
copying cnf/etc-update.conf -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/etc
copying cnf/dispatch-conf.conf -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/etc
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/etc/logrotate.d
copying cnf/logrotate.d/elog-save-summary -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/etc/logrotate.d
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/portage
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/portage/config
copying cnf/make.conf.example -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/portage/config
copying cnf/make.globals -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/portage/config
copying cnf/repos.conf -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/portage/config
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/portage/config/sets
copying cnf/sets/portage.conf -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/portage/config/sets
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/doc
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/share/doc/portage-2.2.20.1
copying NEWS -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/doc/portage-2.2.20.1
copying RELEASE-NOTES -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/share/doc/portage-2.2.20.1
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/usr/lib/portage/bin
copying bin/deprecated-path -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/portage/bin
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/etc/portage
creating /var/tmp/portage/sys-apps/portage-2.2.20.1/image/_python3.4/etc/portage/repo.postsync.d
copying cnf/repo.postsync.d/example -> /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/etc/portage/repo.postsync.d
running install_egg_info
Writing /var/tmp/portage/sys-apps/portage-2.2.20.1/image//_python3.4/usr/lib/python3.4/site-packages/portage-2.2.20.1-py3.4.egg-info
* python2_7: running distutils-r1_run_phase python_install_all
* Moving admin scripts to the correct directory
* Moving /usr/bin/archive-conf to /usr/sbin/archive-conf
* Moving /usr/bin/dispatch-conf to /usr/sbin/dispatch-conf
* Moving /usr/bin/emaint to /usr/sbin/emaint
* Moving /usr/bin/env-update to /usr/sbin/env-update
* Moving /usr/bin/etc-update to /usr/sbin/etc-update
* Moving /usr/bin/fixpackages to /usr/sbin/fixpackages
* Moving /usr/bin/regenworld to /usr/sbin/regenworld
* python3_4: running distutils-r1_run_phase python_install_all
* Moving admin scripts to the correct directory
* Moving /usr/bin/archive-conf to /usr/sbin/archive-conf
mv: cannot stat ‘/var/tmp/portage/sys-apps/portage-2.2.20.1/image/usr/bin/archive-conf’: No such file or directory
* ERROR: sys-apps/portage-2.2.20.1::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3818: Called distutils-r1_src_install
* environment, line 972: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 344: Called _distutils-r1_run_foreach_impl 'python_install_all'
* environment, line 358: Called python_foreach_impl 'distutils-r1_run_phase' 'python_install_all'
* environment, line 3312: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2285: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2283: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 629: Called distutils-r1_run_phase 'python_install_all'
* environment, line 937: Called python_install_all
* environment, line 3470: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.20.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.20.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.20.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.20.1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1'
* S: '/var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1'
* Messages for package sys-apps/portage-2.2.20.1:
* ERROR: sys-apps/portage-2.2.20.1::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3818: Called distutils-r1_src_install
* environment, line 972: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 344: Called _distutils-r1_run_foreach_impl 'python_install_all'
* environment, line 358: Called python_foreach_impl 'distutils-r1_run_phase' 'python_install_all'
* environment, line 3312: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2285: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2283: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 629: Called distutils-r1_run_phase 'python_install_all'
* environment, line 937: Called python_install_all
* environment, line 3470: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.20.1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.20.1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.20.1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.20.1/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1'
* S: '/var/tmp/portage/sys-apps/portage-2.2.20.1/work/portage-2.2.20.1'
23 Dec 2015 03:05:50 UTC: ERROR : CatalystError: cmd() NON-zero return value from: run script failed.
23 Dec 2015 03:05:50 UTC: ERROR : CatalystError: Stage build aborting due to error.
23 Dec 2015 03:05:50 UTC: ERROR : Exception running action sequence run_local
Traceback (most recent call last):
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1399, in run
getattr(self, x)()
File "/usr/lib64/python2.7/site-packages/catalyst/base/stagebase.py", line 1311, in run_local
print_traceback=False)
CatalystError
23 Dec 2015 03:05:50 UTC: NOTICE : Cleaning up... Running unbind()
Full build log at /home/release/tmp/run/catalyst-auto.QYFZDH/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-12-01 2:29 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-12-01 2:29 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/request.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/response.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/urllib/robotparser.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/uu.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/uuid.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/__main__.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/scripts'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/venv/scripts/posix'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/warnings.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wave.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/weakref.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/webbrowser.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/handlers.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/headers.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/simple_server.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/util.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/wsgiref/validate.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xdrlib.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/__init__.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/NodeFilter.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/domreg.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/expatbuilder.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/minicompat.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/minidom.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/pulldom.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/dom/xmlbuilder.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementInclude.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementPath.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/ElementTree.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/etree/cElementTree.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/parsers/expat.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/_exceptions.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/expatreader.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/handler.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/saxutils.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xml/sax/xmlreader.py'...
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/__init__.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/client.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/xmlrpc/server.py'...
Compiling '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/zipfile.py'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/i686-pc-linux-gnu \
./python -E -Wi /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/compileall.py \
-d /usr/lib/python3.4/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/i686-pc-linux-gnu \
./python -E -Wi -O /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/compileall.py \
-d /usr/lib/python3.4/site-packages -f \
-x badsyntax /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages
Listing '/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/site-packages'...
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/i686-pc-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/Grammar3.4.3.final.0.pickle
PYTHONPATH=/var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4 LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/i686-pc-linux-gnu \
./python -E -m lib2to3.pgen2.driver /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar.txt
Generating grammar tables from /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar.txt
Writing grammar tables to /var/tmp/portage/dev-lang/python-3.4.3/image//usr/lib/python3.4/lib2to3/PatternGrammar3.4.3.final.0.pickle
if test "xno" != "xno" ; then \
case no in \
upgrade) ensurepip="--altinstall --upgrade" ;; \
install|*) ensurepip="--altinstall" ;; \
esac; \
LD_LIBRARY_PATH=/var/tmp/portage/dev-lang/python-3.4.3/work/i686-pc-linux-gnu ./python -E -m ensurepip \
$ensurepip --root=/var/tmp/portage/dev-lang/python-3.4.3/image// ; \
fi
* ERROR: dev-lang/python-3.4.3::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4136: Called python_domodule 'epython.py'
* environment, line 3322: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.4.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.4.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.4.3/work/i686-pc-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.4.3/work/Python-3.4.3'
* Messages for package sys-libs/timezone-data-2015f merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-481 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.21-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r4 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.4.3 merged to /tmp/stage1root/:
* ERROR: dev-lang/python-3.4.3::gentoo failed (install phase):
* python_do* and python_new* helpers are banned in EAPIs older than 5.
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 4136: Called python_domodule 'epython.py'
* environment, line 3322: Called die
* The specific snippet of code:
* die "python_do* and python_new* helpers are banned in EAPIs older than 5.";
*
* If you need support, post the output of `emerge --info '=dev-lang/python-3.4.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-3.4.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-3.4.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-3.4.3/work/i686-pc-linux-gnu'
* S: '/var/tmp/portage/dev-lang/python-3.4.3/work/Python-3.4.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20151201/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.ry35oJ/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-08-19 5:20 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-08-19 5:20 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings
-Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowi
ng -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4231: recipe for target 'all-stage3-gcc' failed
make[2]: *** [all-stage3-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16391: recipe for target 'stage3-bubble' failed
make[1]: *** [stage3-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2015e merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-478 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.20-r2 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r1 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package sys-devel/gcc-4.8.4 merged to /tmp/stage1root/:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150819/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.TgCfIE/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-08-05 5:02 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-08-05 5:02 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrit
e-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wn
o-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4192: recipe for target 'all-stage2-gcc' failed
make[2]: *** [all-stage2-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16259: recipe for target 'stage2-bubble' failed
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2015b merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-478 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.20-r2 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r1 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package sys-devel/gcc-4.8.4 merged to /tmp/stage1root/:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150805/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.yoqBle/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-08-04 6:45 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-08-04 6:45 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
flex -ogengtype-lex.c /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype-lex.l && { \
echo '#include "bconfig.h"' > gengtype-lex.c.tmp; \
cat gengtype-lex.c >> gengtype-lex.c.tmp; \
mv gengtype-lex.c.tmp gengtype-lex.c; \
}
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -W
cast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include \
-DBASEVER="\"4.8.4\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo 4.8.4 p1.6, pie-0.6.1) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/version.c
echo "#define BUILDING_GCC_MAJOR `echo 4.8.4 | sed -e 's/^\([0-9]*\).*$/\1/'`" > bversion.h
echo "#define BUILDING_GCC_MINOR `echo 4.8.4 | sed -e 's/^[0-9]*\.\([0-9]*\).*$/\1/'`" >> bversion.h
echo "#define BUILDING_GCC_PATCHLEVEL `echo 4.8.4 | sed -e 's/^[0-9]*\.[0-9]*\.\([0-9]*\)$/\1/'`" >> bversion.h
echo "#define BUILDING_GCC_VERSION (BUILDING_GCC_MAJOR * 1000 + BUILDING_GCC_MINOR)" >> bversion.h
echo timestamp > s-bversion
TARGET_CPU_DEFAULT="" \
HEADERS="config/i386/i386-protos.h tm-preds.h" DEFINES="" \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/mkconfig.sh tm_p.h
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings
-Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
echo timestamp > s-specs
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-gi.list gtyp-input.list
echo timestamp > s-gtyp-input
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowi
ng -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowi
ng -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -Wno-error -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace gengtype-lex.c -o gengtype-lex.o
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
gengtype-lex.c:1:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype-lex.o' failed
make[3]: *** [gengtype-lex.o] Error 1
make[3]: *** Waiting for unfinished jobs....
echo timestamp > s-i386-bt
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4231: recipe for target 'all-stage3-gcc' failed
make[2]: *** [all-stage3-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16391: recipe for target 'stage3-bubble' failed
make[1]: *** [stage3-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2015b merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-478 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.20-r2 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r1 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.4.1 merged to /tmp/stage1root/:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
* Messages for package sys-devel/gcc-4.8.4 merged to /tmp/stage1root/:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20150804/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.7AjNxC/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-07-22 5:21 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-07-22 5:21 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype-parse.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype-parse.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype-parse.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype-parse.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype-parse.o' failed
make[3]: *** [gengtype-parse.o] Error 1
make[3]: *** Waiting for unfinished jobs....
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4152: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16150: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2015b merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.23 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-478 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.20-r2 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r1 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.3.5-r1 merged to /tmp/stage1root/:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
*
* For legacy packages, you should switch active version of Python and run 'python-updater [options]' to rebuild Python modules.
* Messages for package sys-devel/gcc-4.8.4 merged to /tmp/stage1root/:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150722/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.8GZ6n5/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-07-08 4:29 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-07-08 4:29 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "i686-pc-linux-gnu-g++ -DEFAULT_SSP -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4152: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16150: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2015b merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.21 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-478 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.20-r2 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r1 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.3.5-r1 merged to /tmp/stage1root/:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
*
* For legacy packages, you should switch active version of Python and run 'python-updater [options]' to rebuild Python modules.
* Messages for package sys-devel/gcc-4.8.4 merged to /tmp/stage1root/:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150708/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.0ngoOr/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-06-24 8:12 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-06-24 8:12 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "i686-pc-linux-gnu-g++ -DEFAULT_SSP -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.8.4/include/g++-v4/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4152: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16150: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2015b merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.21 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.56 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.2 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.20-r2 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2-r1 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.3.5-r1 merged to /tmp/stage1root/:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
*
* For legacy packages, you should switch active version of Python and run 'python-updater [options]' to rebuild Python modules.
* Messages for package sys-devel/gcc-4.8.4 merged to /tmp/stage1root/:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150624/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.r2V17E/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-06-17 3:08 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-06-17 3:08 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150617///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150617//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150617//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150617/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
@
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.18::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.18::gentoo
* Messages for package sys-apps/portage-2.2.18:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.8.4
>>> Emerging (1 of 26) sys-apps/gentoo-functions-0.8::gentoo
>>> Installing (1 of 26) sys-apps/gentoo-functions-0.8::gentoo
>>> Emerging (2 of 26) sys-libs/glibc-2.20-r2::gentoo
>>> Failed to emerge sys-libs/glibc-2.20-r2, Log file:
>>> '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'
* Package: sys-libs/glibc-2.20-r2
* Repository: gentoo
* Maintainer: toolchain@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Checking gcc for __thread support ...
[ ok ]
* Checking kernel version (3.16.5 >= 2.6.32) ...
[ ok ]
* Checking linux-headers version (3.18.0 >= 2.6.32) ...
[ ok ]
>>> Unpacking glibc-2.20.tar.xz to /var/tmp/portage/sys-libs/glibc-2.20-r2/work
* Applying Gentoo Glibc Patchset 2.20-4 ...
* 00_all_0001-disable-ldconfig-during-install.patch ...
[ ok ]
* 00_all_0002-workaround-crash-when-handling-signals-in-static-PIE.patch ...
[ ok ]
* 00_all_0003-make-fortify-logic-checks-less-angry.patch ...
[ ok ]
* 00_all_0004-Fix-localedef-segfault-when-run-under-exec-shield-Pa.patch ...
[ ok ]
* 00_all_0005-reload-etc-resolv.conf-when-it-has-changed.patch ...
[ ok ]
* 00_all_0006-nptl-support-thread-stacks-that-grow-up.patch ...
[ ok ]
* 00_all_0007-rtld-do-not-ignore-arch-specific-CFLAGS.patch ...
[ ok ]
* 00_all_0008-nptl-handle-EAGAIN-with-some-futex-operations.patch ...
[ ok ]
* 00_all_0009-gentoo-support-running-tests-under-sandbox.patch ...
[ ok ]
* 00_all_0010-gentoo-disable-building-in-timezone-subdir.patch ...
[ ok ]
* 00_all_0011-arm-fix-PIC-vs-SHARED-typos.patch ...
[ ok ]
* 00_all_0012-hppa-name-setjmp-union.patch ...
[ ok ]
* 00_all_0013-hppa-fix-build-problems-with-atomic-code.patch ...
[ ok ]
* 00_all_0014-hppa-fix-bug-in-floating-point-exception-support.patch ...
[ ok ]
* 00_all_0015-hppa-fix-pthread-spinlock.patch ...
[ ok ]
* 00_all_0016-hppa-fix-__O_SYNC-to-match-the-kernel.patch ...
[ ok ]
* 00_all_0017-disable-PIE-when-checking-for-PIC-default.patch ...
[ ok ]
* 00_all_0018-Update-Russian-translation.patch ...
[ ok ]
* 00_all_0019-Add-new-Linux-3.16-constants-to-netinet-udp.h.patch ...
[ ok ]
* 00_all_0020-Handle-zero-prefix-length-in-getifaddrs-BZ-17371.patch ...
[ ok ]
* 00_all_0021-Revert-to-defining-__extern_inline-only-for-gcc-4.3-.patch ...
[ ok ]
* 00_all_0022-Fix-memory-leak-in-libio-wfileops.c-do_ftell_wide-BZ.patch ...
[ ok ]
* 00_all_0023-Fix-memory-leak-in-error-path-of-do_ftell_wide-BZ-17.patch ...
[ ok ]
* 00_all_0024-Update-French-translation.patch ...
[ ok ]
* 00_all_0025-BZ-17460-Fix-buffer-overrun-in-nscd-help.patch ...
[ ok ]
* 00_all_0026-MIPS-Avoid-a-dangling-vfork-GLIBC_2.0-reference.patch ...
[ ok ]
* 00_all_0027-AArch64-End-frame-record-chain-correctly.patch ...
[ ok ]
* 00_all_0028-CVE-2014-7817-wordexp-fails-to-honour-WRDE_NOCMD.patch ...
[ ok ]
* 00_all_0029-arm-drop-EABI-check.patch ...
[ ok ]
* 00_all_0030-Make-__extern_always_inline-usable-on-clang-again.patch ...
[ ok ]
* 00_all_0031-CVE-2012-3406-Stack-overflow-in-vfprintf-BZ-16617.patch ...
[ ok ]
* 00_all_0032-Avoid-infinite-loop-in-nss_dns-getnetbyname-BZ-17630.patch ...
[ ok ]
* 00_all_0033-Move-findidx-nested-functions-to-top-level.patch ...
[ ok ]
* 00_all_0034-Fix-memory-handling-in-strxfrm_l-BZ-16009.patch ...
[ ok ]
* 00_all_0035-Use-AVX-unaligned-memcpy-only-if-AVX2-is-available.patch ...
[ ok ]
* 00_all_0036-CVE-2015-1472-wscanf-allocates-too-little-memory.patch ...
[ ok ]
* Done with patching
* Using GNU config files from /usr/share/gnuconfig
* Updating scripts/config.sub
[ ok ]
* Updating scripts/config.guess
[ ok ]
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3228: Called eblit-run 'src_prepare'
* environment, line 930: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 934: Called eblit-src_prepare-post
* environment, line 955: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* Messages for package sys-libs/glibc-2.20-r2:
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3228: Called eblit-run 'src_prepare'
* environment, line 930: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 934: Called eblit-src_prepare-post
* environment, line 955: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150617/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.8lnB9f/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-06-03 3:06 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-06-03 3:06 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/release/x86-auto.conf
Setting sharedir to config file value "/usr/lib64/catalyst/"
Setting snapshot_cache to config file value "/home/release/tmp/snapshots"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/home/release/buildroot/x86-dev"
Setting portdir to config file value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache preserve_libs seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Preserving libs during unmerge.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /home/release/tmp/snapshots/20150603/
The autoresume path is /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150603/
stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150603/tmp/stage1root
Location of the package cache is /home/release/buildroot/x86-dev/packages/default/stage1-i686-20150603/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150603/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150603/
clearing chroot ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150603/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150603/
Emptying directory /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150603/
Starting tar extract from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150603/ (This may take some time) ...
tar: SELinux support is not available
tar: ./bin/date: Cannot write: No space left on device
tar: ./bin/su: Cannot write: No space left on device
tar: ./bin/chroot: Cannot write: No space left on device
tar: ./bin/dd: Cannot write: No space left on device
tar: ./bin/cp: Cannot write: No space left on device
tar: ./bin/egrep: Cannot write: No space left on device
tar: ./bin/mknod: Cannot write: No space left on device
tar: ./bin/bash: Cannot write: No space left on device
tar: ./bin/pwd: Cannot write: No space left on device
tar: ./bin/echo: Cannot write: No space left on device
tar: ./bin/seq: Cannot write: No space left on device
tar: ./bin/tar: Cannot write: No space left on device
tar: ./bin/cat: Cannot write: No space left on device
tar: ./bin/findmnt: Cannot write: No space left on device
tar: ./bin/ps: Cannot write: No space left on device
tar: ./bin/expr: Cannot write: No space left on device
tar: ./bin/busybox: Cannot write: No space left on device
tar: ./bin/ifconfig: Cannot write: No space left on device
tar: ./bin/getfattr: Cannot write: No space left on device
tar: ./bin/yes: Cannot write: No space left on device
tar: ./bin/sleep: Cannot write: No space left on device
tar: ./bin/passwd: Cannot write: No space left on device
tar: ./bin/dmesg: Cannot write: No space left on device
tar: ./bin/mv: Cannot write: No space left on device
tar: ./bin/true:
Full build log at /home/release/tmp/run/catalyst-auto.Df45LO/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread
* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-06-01 1:25 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-06-01 1:25 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150527///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150527//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150527//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150527/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.18::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.18::gentoo
* Messages for package sys-apps/portage-2.2.18:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.8.4
>>> Emerging (1 of 20) sys-apps/gentoo-functions-0.8::gentoo
>>> Installing (1 of 20) sys-apps/gentoo-functions-0.8::gentoo
>>> Emerging (2 of 20) sys-libs/glibc-2.20-r2::gentoo
>>> Failed to emerge sys-libs/glibc-2.20-r2, Log file:
>>> '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'
* Package: sys-libs/glibc-2.20-r2
* Repository: gentoo
* Maintainer: toolchain@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Checking gcc for __thread support ...
[ ok ]
* Checking kernel version (3.16.5 >= 2.6.32) ...
[ ok ]
* Checking linux-headers version (3.18.0 >= 2.6.32) ...
[ ok ]
>>> Unpacking glibc-2.20.tar.xz to /var/tmp/portage/sys-libs/glibc-2.20-r2/work
* Applying Gentoo Glibc Patchset 2.20-4 ...
* 00_all_0001-disable-ldconfig-during-install.patch ...
[ ok ]
* 00_all_0002-workaround-crash-when-handling-signals-in-static-PIE.patch ...
[ ok ]
* 00_all_0003-make-fortify-logic-checks-less-angry.patch ...
[ ok ]
* 00_all_0004-Fix-localedef-segfault-when-run-under-exec-shield-Pa.patch ...
[ ok ]
* 00_all_0005-reload-etc-resolv.conf-when-it-has-changed.patch ...
[ ok ]
* 00_all_0006-nptl-support-thread-stacks-that-grow-up.patch ...
[ ok ]
* 00_all_0007-rtld-do-not-ignore-arch-specific-CFLAGS.patch ...
[ ok ]
* 00_all_0008-nptl-handle-EAGAIN-with-some-futex-operations.patch ...
[ ok ]
* 00_all_0009-gentoo-support-running-tests-under-sandbox.patch ...
[ ok ]
* 00_all_0010-gentoo-disable-building-in-timezone-subdir.patch ...
[ ok ]
* 00_all_0011-arm-fix-PIC-vs-SHARED-typos.patch ...
[ ok ]
* 00_all_0012-hppa-name-setjmp-union.patch ...
[ ok ]
* 00_all_0013-hppa-fix-build-problems-with-atomic-code.patch ...
[ ok ]
* 00_all_0014-hppa-fix-bug-in-floating-point-exception-support.patch ...
[ ok ]
* 00_all_0015-hppa-fix-pthread-spinlock.patch ...
[ ok ]
* 00_all_0016-hppa-fix-__O_SYNC-to-match-the-kernel.patch ...
[ ok ]
* 00_all_0017-disable-PIE-when-checking-for-PIC-default.patch ...
[ ok ]
* 00_all_0018-Update-Russian-translation.patch ...
[ ok ]
* 00_all_0019-Add-new-Linux-3.16-constants-to-netinet-udp.h.patch ...
[ ok ]
* 00_all_0020-Handle-zero-prefix-length-in-getifaddrs-BZ-17371.patch ...
[ ok ]
* 00_all_0021-Revert-to-defining-__extern_inline-only-for-gcc-4.3-.patch ...
[ ok ]
* 00_all_0022-Fix-memory-leak-in-libio-wfileops.c-do_ftell_wide-BZ.patch ...
[ ok ]
* 00_all_0023-Fix-memory-leak-in-error-path-of-do_ftell_wide-BZ-17.patch ...
[ ok ]
* 00_all_0024-Update-French-translation.patch ...
[ ok ]
* 00_all_0025-BZ-17460-Fix-buffer-overrun-in-nscd-help.patch ...
[ ok ]
* 00_all_0026-MIPS-Avoid-a-dangling-vfork-GLIBC_2.0-reference.patch ...
[ ok ]
* 00_all_0027-AArch64-End-frame-record-chain-correctly.patch ...
[ ok ]
* 00_all_0028-CVE-2014-7817-wordexp-fails-to-honour-WRDE_NOCMD.patch ...
[ ok ]
* 00_all_0029-arm-drop-EABI-check.patch ...
[ ok ]
* 00_all_0030-Make-__extern_always_inline-usable-on-clang-again.patch ...
[ ok ]
* 00_all_0031-CVE-2012-3406-Stack-overflow-in-vfprintf-BZ-16617.patch ...
[ ok ]
* 00_all_0032-Avoid-infinite-loop-in-nss_dns-getnetbyname-BZ-17630.patch ...
[ ok ]
* 00_all_0033-Move-findidx-nested-functions-to-top-level.patch ...
[ ok ]
* 00_all_0034-Fix-memory-handling-in-strxfrm_l-BZ-16009.patch ...
[ ok ]
* 00_all_0035-Use-AVX-unaligned-memcpy-only-if-AVX2-is-available.patch ...
[ ok ]
* 00_all_0036-CVE-2015-1472-wscanf-allocates-too-little-memory.patch ...
[ ok ]
* Done with patching
* Using GNU config files from /usr/share/gnuconfig
* Updating scripts/config.sub
[ ok ]
* Updating scripts/config.guess
[ ok ]
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3205: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* Messages for package sys-libs/glibc-2.20-r2:
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3205: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150527/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.1DYKym/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-05-20 3:07 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-05-20 3:07 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150520///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150520//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150520//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150520/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.18::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.18::gentoo
* Messages for package sys-apps/portage-2.2.18:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.8.4
>>> Emerging (1 of 16) sys-apps/gentoo-functions-0.8::gentoo
>>> Installing (1 of 16) sys-apps/gentoo-functions-0.8::gentoo
>>> Emerging (2 of 16) sys-libs/glibc-2.20-r2::gentoo
>>> Failed to emerge sys-libs/glibc-2.20-r2, Log file:
>>> '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'
* Package: sys-libs/glibc-2.20-r2
* Repository: gentoo
* Maintainer: toolchain@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Checking gcc for __thread support ...
[ ok ]
* Checking kernel version (3.16.5 >= 2.6.32) ...
[ ok ]
* Checking linux-headers version (3.18.0 >= 2.6.32) ...
[ ok ]
>>> Unpacking glibc-2.20.tar.xz to /var/tmp/portage/sys-libs/glibc-2.20-r2/work
* Applying Gentoo Glibc Patchset 2.20-4 ...
* 00_all_0001-disable-ldconfig-during-install.patch ...
[ ok ]
* 00_all_0002-workaround-crash-when-handling-signals-in-static-PIE.patch ...
[ ok ]
* 00_all_0003-make-fortify-logic-checks-less-angry.patch ...
[ ok ]
* 00_all_0004-Fix-localedef-segfault-when-run-under-exec-shield-Pa.patch ...
[ ok ]
* 00_all_0005-reload-etc-resolv.conf-when-it-has-changed.patch ...
[ ok ]
* 00_all_0006-nptl-support-thread-stacks-that-grow-up.patch ...
[ ok ]
* 00_all_0007-rtld-do-not-ignore-arch-specific-CFLAGS.patch ...
[ ok ]
* 00_all_0008-nptl-handle-EAGAIN-with-some-futex-operations.patch ...
[ ok ]
* 00_all_0009-gentoo-support-running-tests-under-sandbox.patch ...
[ ok ]
* 00_all_0010-gentoo-disable-building-in-timezone-subdir.patch ...
[ ok ]
* 00_all_0011-arm-fix-PIC-vs-SHARED-typos.patch ...
[ ok ]
* 00_all_0012-hppa-name-setjmp-union.patch ...
[ ok ]
* 00_all_0013-hppa-fix-build-problems-with-atomic-code.patch ...
[ ok ]
* 00_all_0014-hppa-fix-bug-in-floating-point-exception-support.patch ...
[ ok ]
* 00_all_0015-hppa-fix-pthread-spinlock.patch ...
[ ok ]
* 00_all_0016-hppa-fix-__O_SYNC-to-match-the-kernel.patch ...
[ ok ]
* 00_all_0017-disable-PIE-when-checking-for-PIC-default.patch ...
[ ok ]
* 00_all_0018-Update-Russian-translation.patch ...
[ ok ]
* 00_all_0019-Add-new-Linux-3.16-constants-to-netinet-udp.h.patch ...
[ ok ]
* 00_all_0020-Handle-zero-prefix-length-in-getifaddrs-BZ-17371.patch ...
[ ok ]
* 00_all_0021-Revert-to-defining-__extern_inline-only-for-gcc-4.3-.patch ...
[ ok ]
* 00_all_0022-Fix-memory-leak-in-libio-wfileops.c-do_ftell_wide-BZ.patch ...
[ ok ]
* 00_all_0023-Fix-memory-leak-in-error-path-of-do_ftell_wide-BZ-17.patch ...
[ ok ]
* 00_all_0024-Update-French-translation.patch ...
[ ok ]
* 00_all_0025-BZ-17460-Fix-buffer-overrun-in-nscd-help.patch ...
[ ok ]
* 00_all_0026-MIPS-Avoid-a-dangling-vfork-GLIBC_2.0-reference.patch ...
[ ok ]
* 00_all_0027-AArch64-End-frame-record-chain-correctly.patch ...
[ ok ]
* 00_all_0028-CVE-2014-7817-wordexp-fails-to-honour-WRDE_NOCMD.patch ...
[ ok ]
* 00_all_0029-arm-drop-EABI-check.patch ...
[ ok ]
* 00_all_0030-Make-__extern_always_inline-usable-on-clang-again.patch ...
[ ok ]
* 00_all_0031-CVE-2012-3406-Stack-overflow-in-vfprintf-BZ-16617.patch ...
[ ok ]
* 00_all_0032-Avoid-infinite-loop-in-nss_dns-getnetbyname-BZ-17630.patch ...
[ ok ]
* 00_all_0033-Move-findidx-nested-functions-to-top-level.patch ...
[ ok ]
* 00_all_0034-Fix-memory-handling-in-strxfrm_l-BZ-16009.patch ...
[ ok ]
* 00_all_0035-Use-AVX-unaligned-memcpy-only-if-AVX2-is-available.patch ...
[ ok ]
* 00_all_0036-CVE-2015-1472-wscanf-allocates-too-little-memory.patch ...
[ ok ]
* Done with patching
* Using GNU config files from /usr/share/gnuconfig
* Updating scripts/config.sub
[ ok ]
* Updating scripts/config.guess
[ ok ]
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3203: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* Messages for package sys-libs/glibc-2.20-r2:
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3203: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150520/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.ngqNBf/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-05-13 3:06 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-05-13 3:06 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150513///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150513//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150513//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150513/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.18::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.18::gentoo
* Messages for package sys-apps/portage-2.2.18:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.8.4
>>> Emerging (1 of 14) sys-apps/gentoo-functions-0.8::gentoo
>>> Installing (1 of 14) sys-apps/gentoo-functions-0.8::gentoo
>>> Emerging (2 of 14) sys-libs/glibc-2.20-r2::gentoo
>>> Failed to emerge sys-libs/glibc-2.20-r2, Log file:
>>> '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'
* Package: sys-libs/glibc-2.20-r2
* Repository: gentoo
* Maintainer: toolchain@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Checking gcc for __thread support ...
[ ok ]
* Checking kernel version (3.16.5 >= 2.6.32) ...
[ ok ]
* Checking linux-headers version (3.18.0 >= 2.6.32) ...
[ ok ]
>>> Unpacking glibc-2.20.tar.xz to /var/tmp/portage/sys-libs/glibc-2.20-r2/work
* Applying Gentoo Glibc Patchset 2.20-4 ...
* 00_all_0001-disable-ldconfig-during-install.patch ...
[ ok ]
* 00_all_0002-workaround-crash-when-handling-signals-in-static-PIE.patch ...
[ ok ]
* 00_all_0003-make-fortify-logic-checks-less-angry.patch ...
[ ok ]
* 00_all_0004-Fix-localedef-segfault-when-run-under-exec-shield-Pa.patch ...
[ ok ]
* 00_all_0005-reload-etc-resolv.conf-when-it-has-changed.patch ...
[ ok ]
* 00_all_0006-nptl-support-thread-stacks-that-grow-up.patch ...
[ ok ]
* 00_all_0007-rtld-do-not-ignore-arch-specific-CFLAGS.patch ...
[ ok ]
* 00_all_0008-nptl-handle-EAGAIN-with-some-futex-operations.patch ...
[ ok ]
* 00_all_0009-gentoo-support-running-tests-under-sandbox.patch ...
[ ok ]
* 00_all_0010-gentoo-disable-building-in-timezone-subdir.patch ...
[ ok ]
* 00_all_0011-arm-fix-PIC-vs-SHARED-typos.patch ...
[ ok ]
* 00_all_0012-hppa-name-setjmp-union.patch ...
[ ok ]
* 00_all_0013-hppa-fix-build-problems-with-atomic-code.patch ...
[ ok ]
* 00_all_0014-hppa-fix-bug-in-floating-point-exception-support.patch ...
[ ok ]
* 00_all_0015-hppa-fix-pthread-spinlock.patch ...
[ ok ]
* 00_all_0016-hppa-fix-__O_SYNC-to-match-the-kernel.patch ...
[ ok ]
* 00_all_0017-disable-PIE-when-checking-for-PIC-default.patch ...
[ ok ]
* 00_all_0018-Update-Russian-translation.patch ...
[ ok ]
* 00_all_0019-Add-new-Linux-3.16-constants-to-netinet-udp.h.patch ...
[ ok ]
* 00_all_0020-Handle-zero-prefix-length-in-getifaddrs-BZ-17371.patch ...
[ ok ]
* 00_all_0021-Revert-to-defining-__extern_inline-only-for-gcc-4.3-.patch ...
[ ok ]
* 00_all_0022-Fix-memory-leak-in-libio-wfileops.c-do_ftell_wide-BZ.patch ...
[ ok ]
* 00_all_0023-Fix-memory-leak-in-error-path-of-do_ftell_wide-BZ-17.patch ...
[ ok ]
* 00_all_0024-Update-French-translation.patch ...
[ ok ]
* 00_all_0025-BZ-17460-Fix-buffer-overrun-in-nscd-help.patch ...
[ ok ]
* 00_all_0026-MIPS-Avoid-a-dangling-vfork-GLIBC_2.0-reference.patch ...
[ ok ]
* 00_all_0027-AArch64-End-frame-record-chain-correctly.patch ...
[ ok ]
* 00_all_0028-CVE-2014-7817-wordexp-fails-to-honour-WRDE_NOCMD.patch ...
[ ok ]
* 00_all_0029-arm-drop-EABI-check.patch ...
[ ok ]
* 00_all_0030-Make-__extern_always_inline-usable-on-clang-again.patch ...
[ ok ]
* 00_all_0031-CVE-2012-3406-Stack-overflow-in-vfprintf-BZ-16617.patch ...
[ ok ]
* 00_all_0032-Avoid-infinite-loop-in-nss_dns-getnetbyname-BZ-17630.patch ...
[ ok ]
* 00_all_0033-Move-findidx-nested-functions-to-top-level.patch ...
[ ok ]
* 00_all_0034-Fix-memory-handling-in-strxfrm_l-BZ-16009.patch ...
[ ok ]
* 00_all_0035-Use-AVX-unaligned-memcpy-only-if-AVX2-is-available.patch ...
[ ok ]
* 00_all_0036-CVE-2015-1472-wscanf-allocates-too-little-memory.patch ...
[ ok ]
* Done with patching
* Using GNU config files from /usr/share/gnuconfig
* Updating scripts/config.sub
[ ok ]
* Updating scripts/config.guess
[ ok ]
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3203: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* Messages for package sys-libs/glibc-2.20-r2:
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3203: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150513/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.tr3Dwd/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-05-06 3:06 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-05-06 3:06 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150506///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150506//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150506//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150506/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.18::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.18::gentoo
* Messages for package sys-apps/portage-2.2.18:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.8.4
>>> Emerging (1 of 14) sys-apps/gentoo-functions-0.8::gentoo
>>> Installing (1 of 14) sys-apps/gentoo-functions-0.8::gentoo
>>> Emerging (2 of 14) sys-libs/glibc-2.20-r2::gentoo
>>> Failed to emerge sys-libs/glibc-2.20-r2, Log file:
>>> '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'
* Package: sys-libs/glibc-2.20-r2
* Repository: gentoo
* Maintainer: toolchain@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Checking gcc for __thread support ...
[ ok ]
* Checking kernel version (3.16.5 >= 2.6.32) ...
[ ok ]
* Checking linux-headers version (3.18.0 >= 2.6.32) ...
[ ok ]
>>> Unpacking glibc-2.20.tar.xz to /var/tmp/portage/sys-libs/glibc-2.20-r2/work
* Applying Gentoo Glibc Patchset 2.20-4 ...
* 00_all_0001-disable-ldconfig-during-install.patch ...
[ ok ]
* 00_all_0002-workaround-crash-when-handling-signals-in-static-PIE.patch ...
[ ok ]
* 00_all_0003-make-fortify-logic-checks-less-angry.patch ...
[ ok ]
* 00_all_0004-Fix-localedef-segfault-when-run-under-exec-shield-Pa.patch ...
[ ok ]
* 00_all_0005-reload-etc-resolv.conf-when-it-has-changed.patch ...
[ ok ]
* 00_all_0006-nptl-support-thread-stacks-that-grow-up.patch ...
[ ok ]
* 00_all_0007-rtld-do-not-ignore-arch-specific-CFLAGS.patch ...
[ ok ]
* 00_all_0008-nptl-handle-EAGAIN-with-some-futex-operations.patch ...
[ ok ]
* 00_all_0009-gentoo-support-running-tests-under-sandbox.patch ...
[ ok ]
* 00_all_0010-gentoo-disable-building-in-timezone-subdir.patch ...
[ ok ]
* 00_all_0011-arm-fix-PIC-vs-SHARED-typos.patch ...
[ ok ]
* 00_all_0012-hppa-name-setjmp-union.patch ...
[ ok ]
* 00_all_0013-hppa-fix-build-problems-with-atomic-code.patch ...
[ ok ]
* 00_all_0014-hppa-fix-bug-in-floating-point-exception-support.patch ...
[ ok ]
* 00_all_0015-hppa-fix-pthread-spinlock.patch ...
[ ok ]
* 00_all_0016-hppa-fix-__O_SYNC-to-match-the-kernel.patch ...
[ ok ]
* 00_all_0017-disable-PIE-when-checking-for-PIC-default.patch ...
[ ok ]
* 00_all_0018-Update-Russian-translation.patch ...
[ ok ]
* 00_all_0019-Add-new-Linux-3.16-constants-to-netinet-udp.h.patch ...
[ ok ]
* 00_all_0020-Handle-zero-prefix-length-in-getifaddrs-BZ-17371.patch ...
[ ok ]
* 00_all_0021-Revert-to-defining-__extern_inline-only-for-gcc-4.3-.patch ...
[ ok ]
* 00_all_0022-Fix-memory-leak-in-libio-wfileops.c-do_ftell_wide-BZ.patch ...
[ ok ]
* 00_all_0023-Fix-memory-leak-in-error-path-of-do_ftell_wide-BZ-17.patch ...
[ ok ]
* 00_all_0024-Update-French-translation.patch ...
[ ok ]
* 00_all_0025-BZ-17460-Fix-buffer-overrun-in-nscd-help.patch ...
[ ok ]
* 00_all_0026-MIPS-Avoid-a-dangling-vfork-GLIBC_2.0-reference.patch ...
[ ok ]
* 00_all_0027-AArch64-End-frame-record-chain-correctly.patch ...
[ ok ]
* 00_all_0028-CVE-2014-7817-wordexp-fails-to-honour-WRDE_NOCMD.patch ...
[ ok ]
* 00_all_0029-arm-drop-EABI-check.patch ...
[ ok ]
* 00_all_0030-Make-__extern_always_inline-usable-on-clang-again.patch ...
[ ok ]
* 00_all_0031-CVE-2012-3406-Stack-overflow-in-vfprintf-BZ-16617.patch ...
[ ok ]
* 00_all_0032-Avoid-infinite-loop-in-nss_dns-getnetbyname-BZ-17630.patch ...
[ ok ]
* 00_all_0033-Move-findidx-nested-functions-to-top-level.patch ...
[ ok ]
* 00_all_0034-Fix-memory-handling-in-strxfrm_l-BZ-16009.patch ...
[ ok ]
* 00_all_0035-Use-AVX-unaligned-memcpy-only-if-AVX2-is-available.patch ...
[ ok ]
* 00_all_0036-CVE-2015-1472-wscanf-allocates-too-little-memory.patch ...
[ ok ]
* Done with patching
* Using GNU config files from /usr/share/gnuconfig
* Updating scripts/config.sub
[ ok ]
* Updating scripts/config.guess
[ ok ]
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3203: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* Messages for package sys-libs/glibc-2.20-r2:
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3203: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150506/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.Z0JQcL/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-04-29 3:06 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-04-29 3:06 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150429///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150429//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150429//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150429/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/portage-2.2.18::gentoo
>>> Installing (1 of 1) sys-apps/portage-2.2.18::gentoo
* Messages for package sys-apps/portage-2.2.18:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Running pre-merge checks for sys-devel/gcc-4.8.4
>>> Emerging (1 of 13) sys-apps/gentoo-functions-0.8::gentoo
>>> Installing (1 of 13) sys-apps/gentoo-functions-0.8::gentoo
>>> Emerging (2 of 13) sys-libs/glibc-2.20-r2::gentoo
>>> Failed to emerge sys-libs/glibc-2.20-r2, Log file:
>>> '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'
* Package: sys-libs/glibc-2.20-r2
* Repository: gentoo
* Maintainer: toolchain@gentoo.org
* USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Checking gcc for __thread support ...
[ ok ]
* Checking kernel version (3.16.5 >= 2.6.32) ...
[ ok ]
* Checking linux-headers version (3.18.0 >= 2.6.32) ...
[ ok ]
>>> Unpacking glibc-2.20.tar.xz to /var/tmp/portage/sys-libs/glibc-2.20-r2/work
* Applying Gentoo Glibc Patchset 2.20-4 ...
* 00_all_0001-disable-ldconfig-during-install.patch ...
[ ok ]
* 00_all_0002-workaround-crash-when-handling-signals-in-static-PIE.patch ...
[ ok ]
* 00_all_0003-make-fortify-logic-checks-less-angry.patch ...
[ ok ]
* 00_all_0004-Fix-localedef-segfault-when-run-under-exec-shield-Pa.patch ...
[ ok ]
* 00_all_0005-reload-etc-resolv.conf-when-it-has-changed.patch ...
[ ok ]
* 00_all_0006-nptl-support-thread-stacks-that-grow-up.patch ...
[ ok ]
* 00_all_0007-rtld-do-not-ignore-arch-specific-CFLAGS.patch ...
[ ok ]
* 00_all_0008-nptl-handle-EAGAIN-with-some-futex-operations.patch ...
[ ok ]
* 00_all_0009-gentoo-support-running-tests-under-sandbox.patch ...
[ ok ]
* 00_all_0010-gentoo-disable-building-in-timezone-subdir.patch ...
[ ok ]
* 00_all_0011-arm-fix-PIC-vs-SHARED-typos.patch ...
[ ok ]
* 00_all_0012-hppa-name-setjmp-union.patch ...
[ ok ]
* 00_all_0013-hppa-fix-build-problems-with-atomic-code.patch ...
[ ok ]
* 00_all_0014-hppa-fix-bug-in-floating-point-exception-support.patch ...
[ ok ]
* 00_all_0015-hppa-fix-pthread-spinlock.patch ...
[ ok ]
* 00_all_0016-hppa-fix-__O_SYNC-to-match-the-kernel.patch ...
[ ok ]
* 00_all_0017-disable-PIE-when-checking-for-PIC-default.patch ...
[ ok ]
* 00_all_0018-Update-Russian-translation.patch ...
[ ok ]
* 00_all_0019-Add-new-Linux-3.16-constants-to-netinet-udp.h.patch ...
[ ok ]
* 00_all_0020-Handle-zero-prefix-length-in-getifaddrs-BZ-17371.patch ...
[ ok ]
* 00_all_0021-Revert-to-defining-__extern_inline-only-for-gcc-4.3-.patch ...
[ ok ]
* 00_all_0022-Fix-memory-leak-in-libio-wfileops.c-do_ftell_wide-BZ.patch ...
[ ok ]
* 00_all_0023-Fix-memory-leak-in-error-path-of-do_ftell_wide-BZ-17.patch ...
[ ok ]
* 00_all_0024-Update-French-translation.patch ...
[ ok ]
* 00_all_0025-BZ-17460-Fix-buffer-overrun-in-nscd-help.patch ...
[ ok ]
* 00_all_0026-MIPS-Avoid-a-dangling-vfork-GLIBC_2.0-reference.patch ...
[ ok ]
* 00_all_0027-AArch64-End-frame-record-chain-correctly.patch ...
[ ok ]
* 00_all_0028-CVE-2014-7817-wordexp-fails-to-honour-WRDE_NOCMD.patch ...
[ ok ]
* 00_all_0029-arm-drop-EABI-check.patch ...
[ ok ]
* 00_all_0030-Make-__extern_always_inline-usable-on-clang-again.patch ...
[ ok ]
* 00_all_0031-CVE-2012-3406-Stack-overflow-in-vfprintf-BZ-16617.patch ...
[ ok ]
* 00_all_0032-Avoid-infinite-loop-in-nss_dns-getnetbyname-BZ-17630.patch ...
[ ok ]
* 00_all_0033-Move-findidx-nested-functions-to-top-level.patch ...
[ ok ]
* 00_all_0034-Fix-memory-handling-in-strxfrm_l-BZ-16009.patch ...
[ ok ]
* 00_all_0035-Use-AVX-unaligned-memcpy-only-if-AVX2-is-available.patch ...
[ ok ]
* 00_all_0036-CVE-2015-1472-wscanf-allocates-too-little-memory.patch ...
[ ok ]
* Done with patching
* Using GNU config files from /usr/share/gnuconfig
* Updating scripts/config.sub
[ ok ]
* Updating scripts/config.guess
[ ok ]
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3203: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* Messages for package sys-libs/glibc-2.20-r2:
* You need to switch to a newer compiler; gcc-4.8.[0-3] and gcc-4.9.0 miscompile
* glibc. See https://bugs.gentoo.org/547420 for details.
* ERROR: sys-libs/glibc-2.20-r2::gentoo failed (prepare phase):
* need to switch compilers #547420
*
* Call stack:
* ebuild.sh, line 93: Called src_prepare
* environment, line 3203: Called eblit-run 'src_prepare'
* environment, line 915: Called eblit-run-maybe 'eblit-src_prepare-post'
* environment, line 919: Called eblit-src_prepare-post
* environment, line 940: Called die
* The specific snippet of code:
* die "need to switch compilers #547420"
*
* If you need support, post the output of `emerge --info '=sys-libs/glibc-2.20-r2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.20-r2::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.20-r2/temp/environment'.
* Working directory: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
* S: '/var/tmp/portage/sys-libs/glibc-2.20-r2/work/glibc-2.20'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150429/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.l8zpq8/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-04-22 3:47 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-04-22 3:47 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
checking assembler for swap suffix... yes
checking assembler for different section symbol subtraction... yes
checking assembler for GOTOFF in data... yes
checking assembler for rep and lock prefix... yes
checking assembler for ud2 mnemonic... yes
checking assembler for R_386_TLS_GD_PLT reloc... no
checking assembler for R_386_TLS_LDM_PLT reloc... no
checking assembler for dwarf2 debug_line support... yes
checking assembler for buggy dwarf2 .file directive... no
checking assembler for --gdwarf2 option... yes
checking assembler for --gstabs option... yes
checking assembler for --debug-prefix-map option... yes
checking assembler for .lcomm with alignment... no
checking assembler for gnu_unique_object... yes
ldd (Gentoo 2.20-r2 p4) 2.20
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by Roland McGrath and Ulrich Drepper.
checking assembler for tolerance to line number 0... yes
checking linker PT_GNU_EH_FRAME support... yes
checking linker position independent executable support... yes
checking linker EH-compatible garbage collection of sections... yes
checking linker EH garbage collection of sections bug... no
checking linker --as-needed support... yes
checking linker --build-id support... yes
checking linker *_sol2 emulation support... no
checking linker --sysroot support... yes
checking __stack_chk_fail in target C library... (cached) yes
checking sys/sdt.h in the target C library... no
checking dl_iterate_phdr in target C library... unknown
checking whether to enable maintainer-specific portions of Makefiles... no
Links are now set up to build a native compiler for i686-pc-linux-gnu.
checking for exported symbols... yes
checking for -rdynamic... yes
checking for library containing dlopen... -ldl
checking for -fPIC -shared... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating as
config.status: creating collect-ld
config.status: creating nm
config.status: creating Makefile
config.status: creating ada/gcc-interface/Makefile
config.status: creating ada/Makefile
config.status: creating auto-host.h
config.status: executing default commands
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/opt-gather.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/fortran/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/go/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/c-family/c.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/common.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/fused-madd.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/gnu-user.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux.opt /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/linux-android.opt > tmp-optionlist
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-optionlist optionlist
echo timestamp > s-options
TARGET_CPU_DEFAULT="" \
HEADERS="config/i386/i386-protos.h tm-preds.h" DEFINES="" \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/mkconfig.sh tm_p.h
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' >> tmp-all-tree.def
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/fortran/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/||' > tmp-specs.h
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-specs.h specs.h
echo timestamp > s-specs
echo "/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrit
e-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/bash /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gcc-ar.c gcc-ranlib.c
/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DHOST_GENERATOR_FILE -O2 -march=i686 -pipe -gtoggle -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wn
o-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c -o gengtype.o
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:500:34: error: declaration of C function 'const char* strsignal(int)' conflicts with
extern const char *strsignal (int);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:563:14: error: previous declaration 'char* strsignal(int)' here
extern char *strsignal (int __sig) __THROW;
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:645:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/../include/libiberty.h:110:36: error: new declaration 'char* basename(const char*)'
extern char *basename (const char *);
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/cstring:42:0,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:205,
from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:
/usr/include/string.h:600:26: error: ambiguates old declaration 'const char* basename(const char*)'
extern "C++" const char *basename (const char *__filename)
^
In file included from /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.c:26:0:
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:289:56: error: 'CHAR_BIT' was not declared in this scope
? ~ (t) 0 << (sizeof(t) * CHAR_BIT - 1) : (t) 0))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:290:44: note: in expansion of macro 'INTTYPE_MINIMUM'
#define INTTYPE_MAXIMUM(t) ((t) (~ (t) 0 - INTTYPE_MINIMUM (t)))
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/system.h:294:20: note: in expansion of macro 'INTTYPE_MAXIMUM'
# define UCHAR_MAX INTTYPE_MAXIMUM (unsigned char)
^
/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4/gcc/gengtype.h:455:23: note: in expansion of macro 'UCHAR_MAX'
CHAR_TOKEN_OFFSET = UCHAR_MAX + 1,
^
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build/gcc'
Makefile:4194: recipe for target 'all-stage2-gcc' failed
make[2]: *** [all-stage2-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:18523: recipe for target 'stage2-bubble' failed
make[1]: *** [stage2-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
Makefile:18729: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/glibc-2.20-r2:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-devel/gcc-4.8.4:
* ERROR: sys-devel/gcc-4.8.4::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.4::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.4::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.4/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-4.8.4'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.4/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150422/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.XWmG6Y/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-03-10 6:21 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-03-10 6:21 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
if test no = yes \
|| test -n "m64=../lib64 m32=../lib mx32=../libx32"; then \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/genmultilib \
"m64/m32" \
" 64 32" \
"" \
"" \
"" \
"" \
"m64=../lib64 m32=../lib mx32=../libx32" \
"" \
"" \
"" \
"no" \
> tmp-mlib.h; \
else \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/genmultilib '' '' '' '' '' '' '' '' \
"" '' no \
> tmp-mlib.h; \
fi
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-mlib.h multilib.h
echo timestamp > s-mlib
lsf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/lang-specs.h /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/lto/lang-specs.h"; for f in $lsf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' > tmp-specs.h
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-specs.h specs.h
echo "/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -DEFAULT_SSP -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings
-Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc " > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
echo timestamp > s-specs
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-gi.list gtyp-input.list
echo timestamp > s-gtyp-input
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\"
-DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ar\" -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\"
-DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"nm\" -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\"
-DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.
3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/xg++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/./prev-gcc/ -B/usr/i686-pc-linux-gnu/bin/ -nostdinc++ -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -B/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include/i686-pc-linux-gnu -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libstdc++-v3/libsupc++ -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/src/.libs -L/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/prev-i686-pc-linux-gnu/libstdc++-v3/libsupc++/.libs -c -DEFAULT_SSP -DGENERATOR_FILE -O2 -march=i686 -pipe -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -W
write-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
#include "bconfig.h"
^
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4231: recipe for target 'all-stage3-gcc' failed
make[2]: *** [all-stage3-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16391: recipe for target 'stage3-bubble' failed
make[1]: *** [stage3-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:16465: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2014j merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package sys-apps/shadow-4.1.5.1-r1 merged to /tmp/stage1root/:
* Running 'grpck' returned errors. Please run it by hand, and then
* run 'grpconv' afterwards!
* Messages for package sys-apps/coreutils-8.21 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-apps/less-458 merged to /tmp/stage1root/:
* lesspipe offers colorization options. Run 'lesspipe -h' for info.
* Messages for package app-portage/portage-utils-0.53 merged to /tmp/stage1root/:
* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize
* Messages for package dev-lang/perl-5.20.1-r4 merged to /tmp/stage1root/:
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptar.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptardiff.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/ptargrep.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/shasum.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/cpan.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/enc2xs.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/piconv.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/instmodsh.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/xsubpp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/zipdetails.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/json_pp.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/config_data.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/corelist.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2usage.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podchecker.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/podselect.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perldoc.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/prove.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2man.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/pod2text.1.bz2 symlink
* Unable to establish /tmp/stage1root//usr/share/man/man1/perlpodstyle.1.bz2 symlink
* Messages for package sys-libs/glibc-2.19-r1 merged to /tmp/stage1root/:
* Defaulting /etc/host.conf:multi to on
* Messages for package dev-libs/libxml2-2.9.2 merged to /tmp/stage1root/:
* Skipping XML catalog creation for stage building (bug #208887).
* Messages for package dev-lang/python-3.3.5-r1 merged to /tmp/stage1root/:
* You have just upgraded from an older version of Python.
*
* Please adjust PYTHON_TARGETS (if so desired), and run emerge with the --newuse or --changed-use option to rebuild packages installing python modules.
*
* For legacy packages, you should switch active version of Python and run 'python-updater [options]' to rebuild Python modules.
* Messages for package sys-apps/portage-2.2.14 merged to /tmp/stage1root/:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* Messages for package sys-devel/gcc-4.8.3 merged to /tmp/stage1root/:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20150310/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.QFwusP/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-02-22 2:38 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-02-22 2:38 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
Configuring /etc/portage...
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150222///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150222//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150222//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150222/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Updating seed stage...
emerge --quiet --buildpkg=n --update --deep @world
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/openrc-0.13.11::gentoo
>>> Installing (1 of 1) sys-apps/openrc-0.13.11::gentoo
* Messages for package sys-apps/openrc-0.13.11:
* In this version of OpenRC, the loopback interface no longer
* satisfies the net virtual.
* If you have services now which do not start because of this,
* They can be fixed by adding rc_need="!net"
* to the /etc/conf.d/<servicename> file.
* You should also file a bug against the service asking that
* need net be dropped from the dependencies.
* The bug you file should block the following tracker:
* https://bugs.gentoo.org/show_bug.cgi?id=439092
*
* Bug https://bugs.gentoo.org/show_bug.cgi?id=427996 was not
* fixed correctly in earlier versions of OpenRC.
* The correct fix is implemented in this version, but that
* means netmount needs to be added to the default runlevel if
* you are using nfs file systems.
*
* You should now update all files in /etc, using etc-update
* or equivalent before restarting any services or this host.
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014j to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.7.3 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.20.1-r4 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.400-r1 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.400-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.14 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.1.1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
The following mask changes are necessary to proceed:
(see "package.unmask" in the portage(5) man page for more details)
# required by virtual/perl-File-Temp-0.230.400-r2
# required by dev-lang/perl-5.20.1-r4
# required by sys-devel/automake-1.13.4
# required by sys-devel/libtool-2.4.4
# required by sys-devel/libtool (argument)
# /etc/portage/package.mask/perl:
=perl-core/File-Temp-0.230.400-r1
Use --autounmask-write to write changes to config files (honoring
CONFIG_PROTECT). Carefully examine the list of proposed changes,
paying special attention to mask or keyword changes that may expose
experimental or unstable packages.
!!! The following installed packages are masked:
- perl-core/File-Temp-0.230.400-r1::gentoo (masked by: package.mask)
For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1253, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1333, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1258, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150222/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.Cjd8Fd/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-02-17 1:18 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-02-17 1:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150217///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150217//tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150217//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20150217/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Installing (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Emerging (2 of 2) sys-apps/portage-2.2.14
>>> Installing (2 of 2) sys-apps/portage-2.2.14
* Messages for package sys-apps/portage-2.2.14:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
[ebuild U ] app-arch/xz-utils-5.0.8 [5.0.5-r1]
[ebuild U ] sys-devel/patch-2.7.3 [2.6.1]
[ebuild U ] sys-libs/timezone-data-2014j [2014i-r1]
[ebuild r U ] app-arch/gzip-1.6 [1.5]
[ebuild U ] sys-apps/file-5.22 [5.19]
[ebuild rR ] sys-apps/net-tools-1.60_p20130513023548
[ebuild rR ] sys-devel/m4-1.4.16
[ebuild rR ] app-misc/pax-utils-0.8.1
[ebuild rR ] app-portage/portage-utils-0.53
[ebuild rR ] dev-libs/gmp-5.1.3-r1
[ebuild rR ] sys-apps/sandbox-2.6-r1
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild U ] sys-apps/kmod-19 [18-r1]
[ebuild U ] dev-libs/libpipeline-1.4.0 [1.2.5]
[ebuild U ] sys-devel/libtool-2.4.4 [2.4.2-r1]
[blocks b ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
[ebuild U ] app-admin/perl-cleaner-2.19 [2.16]
[ebuild U ] app-text/docbook-xsl-stylesheets-1.78.0-r1 [1.78.0]
[ebuild U ] sys-fs/udev-init-scripts-27 [26-r2]
[ebuild U ] dev-libs/openssl-1.0.1k [1.0.1j]
[ebuild rR ] net-misc/iputils-20121221-r1
[ebuild rR ] dev-lang/python-3.3.5-r1
[ebuild U ] dev-lang/python-2.7.9-r1 [2.7.7]
[ebuild rR ] net-misc/openssh-6.7_p1
[ebuild rR ] sys-apps/coreutils-8.21
[ebuild rR ] sys-apps/acl-2.2.52-r1
[ebuild rR ] sys-apps/sed-4.2.1-r1
[ebuild rR ] app-admin/eselect-1.4.3
[ebuild rR ] sys-apps/portage-2.2.14
[ebuild U ] sys-libs/db-4.8.30-r2 [4.8.30-r1]
[ebuild U ] dev-lang/perl-5.20.1-r4 [5.18.2-r2]
[ebuild U ] perl-core/File-Temp-0.230.400-r1 [0.230.0]
[ebuild U ] virtual/perl-File-Temp-0.230.400-r2 [0.230.0-r1]
[ebuild rR ] sys-kernel/linux-headers-3.16
[ebuild U ] dev-util/gtk-doc-am-1.21 [1.20]
[ebuild N ] virtual/perl-CPAN-Meta-YAML-0.12.0
[ebuild rR ] sys-apps/hwids-20141010
[ebuild N ] virtual/perl-version-0.990.900
[ebuild N ] virtual/perl-Text-ParseWords-3.290.0-r1
[ebuild N ] virtual/perl-Test-Simple-1.1.2
[ebuild N ] virtual/perl-Test-Harness-3.330.0
[ebuild N ] virtual/perl-Perl-OSType-1.7.0
[ebuild N ] virtual/perl-Parse-CPAN-Meta-1.441.400
[ebuild N ] virtual/perl-Module-Metadata-1.0.19
[ebuild N ] virtual/perl-Getopt-Long-2.420.0-r1
[ebuild N ] virtual/perl-File-Spec-3.480.0
[ebuild N ] virtual/perl-ExtUtils-ParseXS-3.240.0
[ebuild N ] virtual/perl-ExtUtils-Manifest-1.630.0-r1
[ebuild N ] virtual/perl-ExtUtils-Install-1.670.0
[ebuild N ] virtual/perl-ExtUtils-CBuilder-0.280.217
[ebuild N ] virtual/perl-JSON-PP-2.272.30
[ebuild N ] virtual/perl-Archive-Tar-1.960.0
[ebuild rR ] dev-libs/libxml2-2.9.2
[ebuild N ] virtual/perl-CPAN-Meta-2.140.640
[ebuild U ] sys-devel/gettext-0.19.3 [0.18.3.2]
[ebuild rR ] sys-apps/attr-2.4.47-r1
[ebuild r U ] sys-libs/e2fsprogs-libs-1.42.12 [1.42.10]
[ebuild rR ] sys-devel/make-4.0-r1
[ebuild r U ] sys-process/psmisc-22.21-r2 [22.20]
[ebuild rR ] dev-libs/popt-1.16-r2
[ebuild rR ] sys-apps/findutils-4.4.2-r1
[ebuild rR ] sys-apps/shadow-4.1.5.1-r1
[ebuild rR ] sys-apps/diffutils-3.3
[ebuild rR ] sys-apps/gawk-4.0.2
[ebuild r U ] sys-apps/grep-2.21-r1 [2.16]
[ebuild rR ] app-arch/tar-1.27.1-r2
[ebuild rR ] net-misc/wget-1.16
[ebuild rR ] sys-devel/flex-2.5.39-r1
[ebuild rR ] dev-perl/Locale-gettext-1.50.0-r1
[ebuild rR ] sys-devel/bison-2.4.3
[ebuild rR ] sys-apps/texinfo-4.13-r2
[ebuild rR ] dev-util/intltool-0.50.2-r1
[ebuild rR ] app-text/opensp-1.5.2-r3
[ebuild rR ] dev-libs/libgpg-error-1.13
[ebuild rR ] app-editors/nano-2.3.2
[ebuild rR ] sys-devel/binutils-2.24-r3
[ebuild U ] net-misc/rsync-3.1.1 [3.0.9-r3]
[ebuild rR ] sys-apps/help2man-1.45.1
[ebuild rR ] app-text/openjade-1.3.2-r6
[ebuild rR ] dev-libs/elfutils-0.158
[ebuild rR ] dev-libs/libgcrypt-1.5.4-r1
[ebuild rR ] sys-apps/groff-1.22.2
[ebuild U ] dev-libs/libxslt-1.1.28-r4 [1.1.28-r3]
[ebuild U ] dev-libs/glib-2.40.2 [2.40.0-r1]
[ebuild rR ] x11-misc/shared-mime-info-1.2-r1
[ebuild rR ] dev-util/pkgconfig-0.28-r1
[ebuild N ] perl-core/Module-Build-0.420.500
[ebuild U ] virtual/perl-Module-Build-0.420.500-r1 [0.400.300-r1]
[blocks b ] >perl-core/Module-Build-0.400.300-r999 (">perl-core/Module-Build-0.400.300-r999" is blocking virtual/perl-Module-Build-0.400.300-r1)
[ebuild rR ] app-text/po4a-0.45-r1
[ebuild rR ] sys-apps/man-db-2.6.6
[ebuild rR ] sys-libs/glibc-2.19-r1
[ebuild rR ] sys-libs/pam-1.1.8-r2
[ebuild rR ] sys-devel/gcc-4.8.3
[ebuild rR ] sys-apps/util-linux-2.24.1-r3
[ebuild r U ] sys-fs/e2fsprogs-1.42.12 [1.42.10]
[ebuild rR ] sys-fs/udev-216
[blocks B ] <sys-apps/openrc-0.13 ("<sys-apps/openrc-0.13" is blocking sys-fs/udev-init-scripts-27)
[blocks B ] <sys-apps/openrc-0.13.8 ("<sys-apps/openrc-0.13.8" is blocking sys-apps/kmod-19)
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-lang/perl:0
(dev-lang/perl-5.20.1-r4:0/5.20::gentoo, ebuild scheduled for merge) pulled in by
=dev-lang/perl-5.20* required by (virtual/perl-Module-Metadata-1.0.19:0/0::gentoo, ebuild scheduled for merge)
^ ^^^^^
(and 16 more with the same problem)
(dev-lang/perl-5.18.2-r2:0/5.18::gentoo, installed) pulled in by
dev-lang/perl:0/5.18=[-build(-)] required by (dev-perl/SGMLSpm-1.03-r7:0/0::gentoo, installed)
^^^^^^^^
(and 5 more with the same problem)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(sys-fs/udev-init-scripts-27:0/0::gentoo, ebuild scheduled for merge) pulled in by
>=sys-fs/udev-init-scripts-26 required by (sys-fs/udev-216:0/0::gentoo, ebuild scheduled for merge)
(sys-apps/openrc-0.12.4:0/0::gentoo, installed) pulled in by
sys-apps/openrc required by (virtual/service-manager-0:0/0::gentoo, installed)
>=sys-apps/openrc-0.12 required by (net-misc/netifrc-0.2.2:0/0::gentoo, installed)
sys-apps/openrc required by @system
(sys-apps/kmod-19:0/0::gentoo, ebuild scheduled for merge) pulled in by
sys-apps/kmod[tools] required by (virtual/modutils-0:0/0::gentoo, installed)
>=sys-apps/kmod-16 required by (sys-fs/udev-216:0/0::gentoo, ebuild scheduled for merge)
The following packages are causing rebuilds:
(dev-lang/perl-5.20.1-r4:0/5.20::gentoo, ebuild scheduled for merge) causes rebuilds for:
(app-text/po4a-0.45-r1:0/0::gentoo, ebuild scheduled for merge)
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20150217/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.qvFXE7/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-02-10 1:19 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-02-10 1:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
clearing chroot ...
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150210/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150210/
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150210/
Starting tar extract from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150210/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150210///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150210//tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150210//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20150210/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Installing (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Emerging (2 of 2) sys-apps/portage-2.2.14
>>> Installing (2 of 2) sys-apps/portage-2.2.14
* Messages for package sys-apps/portage-2.2.14:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/coreutils app-arch/xz-utils virtual/editor virtual/libc sys-devel/gcc net-misc/rsync sys-apps/baselayout sys-apps/net-tools sys-devel/gnuconfig sys-apps/sed app-arch/gzip sys-apps/findutils app-arch/tar net-misc/wget sys-devel/automake sys-apps/grep sys-devel/autoconf sys-devel/patch virtual/package-manager app-shells/bash sys-apps/diffutils app-arch/bzip2 virtual/pkgconfig sys-devel/make sys-devel/bison sys-devel/flex sys-apps/which sys-apps/makedev sys-devel/libtool sys-apps/file sys-devel/binutils virtual/os-headers sys-apps/gawk sys-devel/gettext virtual/shadow sys-apps/less
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014i-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.6.1 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.18.2-r2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.14 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.4:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20150210/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.fvYpRh/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-02-04 3:07 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-02-04 3:07 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /home/release/tmp/snapshots/20150204/
The autoresume path is /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150204/
stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150204/tmp/stage1root
Location of the package cache is /home/release/buildroot/x86-dev/packages/default/stage1-i686-20150204/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150204/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150204/
clearing chroot ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150204/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150204/
Emptying directory /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150204/
Starting tar extract from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150204/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150204///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150204//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150204//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150204/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014i-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.6.1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.18.2-r2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.14 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.4:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150204/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.ZFxQEa/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-02-03 1:19 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-02-03 1:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
clearing chroot ...
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150203/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150203/
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150203/
Starting tar extract from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150203/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150203///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150203//tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150203//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20150203/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Installing (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Emerging (2 of 2) sys-apps/portage-2.2.14
>>> Installing (2 of 2) sys-apps/portage-2.2.14
* Messages for package sys-apps/portage-2.2.14:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-devel/autoconf virtual/pkgconfig sys-apps/grep virtual/editor app-arch/tar sys-apps/makedev net-misc/wget sys-apps/gawk sys-apps/coreutils sys-devel/gnuconfig app-shells/bash sys-apps/which sys-apps/diffutils sys-apps/findutils sys-devel/patch sys-apps/net-tools sys-devel/binutils app-arch/xz-utils sys-apps/baselayout app-arch/gzip sys-devel/flex sys-devel/gettext sys-devel/make sys-apps/less virtual/os-headers sys-devel/libtool sys-devel/automake net-misc/rsync virtual/shadow sys-devel/bison sys-apps/file virtual/package-manager virtual/libc sys-apps/sed app-arch/bzip2 sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014i-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.6.1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.18.2-r2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.14 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.4:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20150203/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.jkhwe8/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-01-28 3:08 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-01-28 3:08 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /home/release/tmp/snapshots/20150128/
The autoresume path is /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150128/
stage1 stage path is /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150128/tmp/stage1root
Location of the package cache is /home/release/buildroot/x86-dev/packages/default/stage1-i686-20150128/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150128/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150128/
clearing chroot ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150128/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /home/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150128/
Emptying directory /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150128/
Starting tar extract from /home/release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150128/ (This may take some time) ...
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150128///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150128//tmp
copying chroot-functions.sh to /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150128//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150128/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Updating seed stage...
emerge --quiet --update --deep --newuse --complete-graph --rebuild-if-new-ver gcc
>>> Recording sys-devel/gcc in "world" favorites file...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/baselayout
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-apps/baselayout-2.2::gentoo for /tmp/stage1root/
>>> Installing (1 of 1) sys-apps/baselayout-2.2::gentoo to /tmp/stage1root/
* Messages for package sys-apps/baselayout-2.2 merged to /tmp/stage1root/:
* Initializing /tmp/stage1root/lib as a dir
* Initializing /tmp/stage1root/usr/lib as a dir
* Initializing /tmp/stage1root/usr/local/lib as a dir
* Your system profile has SYMLINK_LIB=no, so that means you need to
* have these paths configured as follows:
* directories: /tmp/stage1root/lib /tmp/stage1root/usr/lib /tmp/stage1root/usr/local/lib
* The ebuild will attempt to fix these, but only for trivial conversions.
* If things fail, you will need to manually create/move the directories.
* Converting /tmp/stage1root/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/lib from a symlink to a dir
* Converting /tmp/stage1root/usr/local/lib from a symlink to a dir
emerge --quiet --usepkg --buildpkg --newuse --oneshot sys-apps/grep virtual/shadow virtual/pkgconfig sys-devel/binutils app-shells/bash sys-apps/net-tools sys-devel/flex sys-apps/gawk app-arch/xz-utils sys-apps/sed sys-devel/bison sys-devel/patch sys-apps/file app-arch/bzip2 app-arch/tar virtual/package-manager net-misc/rsync sys-devel/automake virtual/editor sys-apps/coreutils sys-devel/make sys-apps/findutils virtual/os-headers sys-apps/makedev app-arch/gzip net-misc/wget sys-apps/which sys-devel/libtool sys-apps/diffutils sys-devel/gettext sys-apps/less sys-apps/baselayout virtual/libc sys-devel/autoconf sys-devel/gnuconfig sys-devel/gcc
[ebuild N ] sys-libs/zlib-1.2.8-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/ncurses-5.9-r3 to /tmp/stage1root/
[ebuild N ] app-arch/bzip2-1.0.6-r6 to /tmp/stage1root/
[ebuild N ] virtual/libiconv-0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/gnuconfig-20140212 to /tmp/stage1root/
[ebuild N ] virtual/libintl-0-r1 to /tmp/stage1root/
[ebuild N ] app-arch/xz-utils-5.0.8 to /tmp/stage1root/
[ebuild N ] sys-apps/sed-4.2.1-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/file-5.22 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-config-1.7.3 to /tmp/stage1root/
[ebuild N ] sys-libs/timezone-data-2014i-r1 to /tmp/stage1root/
[ebuild N ] app-misc/editor-wrapper-4 to /tmp/stage1root/
[ebuild N ] dev-libs/popt-1.16-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-config-3-r3 to /tmp/stage1root/
[ebuild N ] sys-apps/shadow-4.1.5.1-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-exec-2.0.1-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/gawk-4.0.2 to /tmp/stage1root/
[ebuild N ] sys-devel/patch-2.6.1 to /tmp/stage1root/
[ebuild N ] app-arch/tar-1.27.1-r2 to /tmp/stage1root/
[ebuild N ] sys-devel/make-4.0-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/findutils-4.4.2-r1 to /tmp/stage1root/
[ebuild N ] app-arch/gzip-1.6 to /tmp/stage1root/
[ebuild N ] sys-apps/which-2.20-r1 to /tmp/stage1root/
[ebuild R ] sys-apps/baselayout-2.2 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-wrapper-13 to /tmp/stage1root/
[ebuild N ] dev-libs/expat-2.1.0-r3 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-wrapper-9 to /tmp/stage1root/
[ebuild N ] dev-util/pkgconfig-0.28-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/makedev-3.23.1 to /tmp/stage1root/
[ebuild N ] dev-libs/gmp-5.1.3-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/coreutils-8.21 to /tmp/stage1root/
[ebuild N ] virtual/libffi-3.0.13-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/sandbox-2.6-r1 to /tmp/stage1root/
[ebuild N ] app-misc/pax-utils-0.8.1 to /tmp/stage1root/
[ebuild N ] virtual/shadow-0 to /tmp/stage1root/
[ebuild N ] sys-apps/net-tools-1.60_p20130513023548 to /tmp/stage1root/
[ebuild N ] sys-apps/diffutils-3.3 to /tmp/stage1root/
[ebuild N ] sys-apps/less-458 to /tmp/stage1root/
[ebuild N ] sys-devel/m4-1.4.16 to /tmp/stage1root/
[ebuild N ] dev-libs/libltdl-2.4.4
[ebuild N ] dev-libs/libltdl-2.4.4 to /tmp/stage1root/
[ebuild N ] app-portage/portage-utils-0.53 to /tmp/stage1root/
[ebuild N ] virtual/pkgconfig-0-r1 to /tmp/stage1root/
[ebuild N ] dev-libs/mpfr-3.1.2-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/flex-2.5.39-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/bison-2.4.3 to /tmp/stage1root/
[ebuild N ] dev-libs/mpc-1.0.1 to /tmp/stage1root/
[ebuild N ] sys-devel/binutils-2.24-r3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-1.4.3 to /tmp/stage1root/
[ebuild N ] app-admin/eselect-python-20111108 to /tmp/stage1root/
[ebuild N ] sys-kernel/linux-headers-3.16 to /tmp/stage1root/
[ebuild N ] virtual/os-headers-0 to /tmp/stage1root/
[ebuild N ] dev-lang/perl-5.18.2-r2 to /tmp/stage1root/
[ebuild N ] perl-core/Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-Data-Dumper-2.154.0 to /tmp/stage1root/
[ebuild N ] perl-core/File-Temp-0.230.0 to /tmp/stage1root/
[ebuild N ] virtual/perl-File-Temp-0.230.0-r1 to /tmp/stage1root/
[ebuild N ] sys-devel/autoconf-2.69 to /tmp/stage1root/
[ebuild N ] sys-devel/automake-1.13.4 to /tmp/stage1root/
[ebuild N ] sys-devel/libtool-2.4.4 to /tmp/stage1root/
[ebuild N ] sys-libs/glibc-2.19-r1 to /tmp/stage1root/
[ebuild N ] sys-libs/readline-6.2_p5-r1 to /tmp/stage1root/
[ebuild N ] app-shells/bash-4.2_p53 to /tmp/stage1root/
[ebuild N ] app-editors/nano-2.3.2 to /tmp/stage1root/
[ebuild N ] dev-libs/libxml2-2.9.2 to /tmp/stage1root/
[ebuild N ] dev-lang/python-2.7.9-r1 to /tmp/stage1root/
[ebuild N ] dev-lang/python-3.3.5-r1 to /tmp/stage1root/
[ebuild N ] sys-apps/portage-2.2.14 to /tmp/stage1root/
[ebuild N ] app-admin/perl-cleaner-2.19 to /tmp/stage1root/
[ebuild N ] app-admin/python-updater-0.11 to /tmp/stage1root/
[ebuild N ] sys-apps/grep-2.21-r1 to /tmp/stage1root/
[ebuild N ] virtual/package-manager-0 to /tmp/stage1root/
[ebuild N ] net-misc/rsync-3.0.9-r3 to /tmp/stage1root/
[ebuild N ] virtual/editor-0 to /tmp/stage1root/
[ebuild N ] net-misc/wget-1.16 to /tmp/stage1root/
[ebuild N ] virtual/libc-0 to /tmp/stage1root/
[ebuild N ] sys-devel/gcc-4.8.3 to /tmp/stage1root/
[ebuild N ] sys-devel/gettext-0.19.3 to /tmp/stage1root/
[blocks B ] <sys-devel/libtool-2.4.3-r2:2 ("<sys-devel/libtool-2.4.3-r2:2" is blocking dev-libs/libltdl-2.4.4)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
(dev-libs/libltdl-2.4.4:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/libltdl:0 required by (sys-devel/libtool-2.4.4:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
(sys-devel/libtool-2.4.2-r1:2/2::gentoo, installed) pulled in by
>=sys-devel/libtool-2.4 required by (app-editors/nano-2.3.2:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (dev-libs/libxml2-2.9.2:2/2::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
>=sys-devel/libtool-2.4 required by (net-misc/wget-1.16:0/0::gentoo, ebuild scheduled for merge to '/tmp/stage1root/')
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20150128/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.cdJ4vb/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-01-27 1:16 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-01-27 1:16 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/release/x86-auto.conf
Setting sharedir to config file value "/usr/lib64/catalyst/"
Setting snapshot_cache to config file value "/release/tmp/snapshots"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache preserve_libs seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Preserving libs during unmerge.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /release/tmp/snapshots/20150127/
The autoresume path is /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150127/
stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20150127/tmp/stage1root
Location of the package cache is /release/buildroot/x86-dev/packages/default/stage1-i686-20150127/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150127/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150127/
clearing chroot ...
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150127/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150127/
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150127/
Starting tar extract from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150127/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150127///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150127//tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150127//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20150127/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Failed to emerge dev-lang/python-exec-2.0.1-r1, Log file:
>>> '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/build.log'
* Package: dev-lang/python-exec-2.0.1-r1
* Repository: gentoo
* Maintainer: python@gentoo.org
* Upstream: mgorny@gentoo.org https://bitbucket.org/mgorny/python-exec/issues/
* USE: abi_x86_32 elibc_glibc kernel_linux python_targets_jython2_5 python_targets_jython2_7 python_targets_pypy python_targets_pypy3 python_targets_python2_7 python_targets_python3_3 python_targets_python3_4 userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Running elibtoolize in: python-exec-2.0.1/
>>> Working in BUILD_DIR: "/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build"
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build/config.log
* ERROR: dev-lang/python-exec-2.0.1-r1::gentoo failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4062: Called autotools-utils_src_configure
* environment, line 905: Called econf '--docdir=/usr/share/doc/python-exec-2.0.1-r1' '--with-eprefix=' '--with-python-impls= jython2.5 jython2.7 pypy pypy3 python3.3 python3.4 python2.7'
* phase-helpers.sh, line 584: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=dev-lang/python-exec-2.0.1-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-exec-2.0.1-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build'
* S: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1'
* Messages for package dev-lang/python-exec-2.0.1-r1:
* ERROR: dev-lang/python-exec-2.0.1-r1::gentoo failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4062: Called autotools-utils_src_configure
* environment, line 905: Called econf '--docdir=/usr/share/doc/python-exec-2.0.1-r1' '--with-eprefix=' '--with-python-impls= jython2.5 jython2.7 pypy pypy3 python3.3 python3.4 python2.7'
* phase-helpers.sh, line 584: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=dev-lang/python-exec-2.0.1-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-exec-2.0.1-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build'
* S: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20150127/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.wF1RYR/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-01-20 1:18 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-01-20 1:18 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/release/x86-auto.conf
Setting sharedir to config file value "/usr/lib64/catalyst/"
Setting snapshot_cache to config file value "/release/tmp/snapshots"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache preserve_libs seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Preserving libs during unmerge.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /release/tmp/snapshots/20150120/
The autoresume path is /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150120/
stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20150120/tmp/stage1root
Location of the package cache is /release/buildroot/x86-dev/packages/default/stage1-i686-20150120/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150120/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150120/
clearing chroot ...
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150120/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150120/
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150120/
Starting tar extract from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150120/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150120///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150120//tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150120//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20150120/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Failed to emerge dev-lang/python-exec-2.0.1-r1, Log file:
>>> '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/build.log'
* Package: dev-lang/python-exec-2.0.1-r1
* Repository: gentoo
* Maintainer: python@gentoo.org
* Upstream: mgorny@gentoo.org https://bitbucket.org/mgorny/python-exec/issues/
* USE: abi_x86_32 elibc_glibc kernel_linux python_targets_jython2_5 python_targets_jython2_7 python_targets_pypy python_targets_pypy3 python_targets_python2_7 python_targets_python3_3 python_targets_python3_4 userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Running elibtoolize in: python-exec-2.0.1/
>>> Working in BUILD_DIR: "/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build"
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build/config.log
* ERROR: dev-lang/python-exec-2.0.1-r1::gentoo failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4062: Called autotools-utils_src_configure
* environment, line 905: Called econf '--docdir=/usr/share/doc/python-exec-2.0.1-r1' '--with-eprefix=' '--with-python-impls= jython2.5 jython2.7 pypy pypy3 python3.3 python3.4 python2.7'
* phase-helpers.sh, line 584: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=dev-lang/python-exec-2.0.1-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-exec-2.0.1-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build'
* S: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1'
* Messages for package dev-lang/python-exec-2.0.1-r1:
* ERROR: dev-lang/python-exec-2.0.1-r1::gentoo failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4062: Called autotools-utils_src_configure
* environment, line 905: Called econf '--docdir=/usr/share/doc/python-exec-2.0.1-r1' '--with-eprefix=' '--with-python-impls= jython2.5 jython2.7 pypy pypy3 python3.3 python3.4 python2.7'
* phase-helpers.sh, line 584: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=dev-lang/python-exec-2.0.1-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-exec-2.0.1-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build'
* S: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20150120/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.GsWwPV/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-01-13 1:19 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-01-13 1:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.18
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2012 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/release/x86-auto.conf
Setting sharedir to config file value "/usr/lib64/catalyst/"
Setting snapshot_cache to config file value "/release/tmp/snapshots"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "autoresume bindist pkgcache preserve_libs seedcache snapcache"
Autoresuming support enabled.
Binary redistribution enabled
Package cache support enabled.
Preserving libs during unmerge.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /release/tmp/snapshots/20150113/
The autoresume path is /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150113/
stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20150113/tmp/stage1root
Location of the package cache is /release/buildroot/x86-dev/packages/default/stage1-i686-20150113/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150113/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150113/
clearing chroot ...
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150113/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20150113/
Emptying directory /release/buildroot/x86-dev/tmp/default/stage1-i686-20150113/
Starting tar extract from /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150113/ (This may take some time) ...
tar: XATTR support is not available
tar: SELinux support is not available
--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: base_dirs
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...
Warning!!!!
Overriding certain env variables may cause catastrophic failure.
If your build fails look here first as the possible problem.
Catalyst assumes you know what you are doing when setting
these variables.
Catalyst Maintainers use VERY minimal envscripts if used at all
You have been warned
--- Running action sequence: setup_environment
--- Running action sequence: run_local
copying make.conf to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150113///tmp/stage1root/etc/portage
Copying stage1-chroot.sh to /tmp
copying stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150113//tmp
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/stage1-i686-20150113//tmp
Ensure the file has the executable bit set
Running stage1-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/stage1-i686-20150113/
>>> Regenerating /etc/ld.so.cache...
Adding USE=' build' to make.conf for portage build
emerge --quiet --oneshot --update --newuse sys-apps/portage
Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)
>>> Verifying ebuild manifests
>>> Emerging (1 of 2) dev-lang/python-exec-2.0.1-r1
>>> Failed to emerge dev-lang/python-exec-2.0.1-r1, Log file:
>>> '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/build.log'
* Package: dev-lang/python-exec-2.0.1-r1
* Repository: gentoo
* Maintainer: python@gentoo.org
* Upstream: mgorny@gentoo.org https://bitbucket.org/mgorny/python-exec/issues/
* USE: abi_x86_32 elibc_glibc kernel_linux python_targets_jython2_5 python_targets_jython2_7 python_targets_pypy python_targets_pypy3 python_targets_python2_7 python_targets_python3_3 python_targets_python3_4 userland_GNU x86
* FEATURES: preserve-libs sandbox userpriv usersandbox
* Running elibtoolize in: python-exec-2.0.1/
>>> Working in BUILD_DIR: "/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build"
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build/config.log
* ERROR: dev-lang/python-exec-2.0.1-r1::gentoo failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4040: Called autotools-utils_src_configure
* environment, line 905: Called econf '--docdir=/usr/share/doc/python-exec-2.0.1-r1' '--with-eprefix=' '--with-python-impls= jython2.5 jython2.7 pypy pypy3 python3.3 python3.4 python2.7'
* phase-helpers.sh, line 584: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=dev-lang/python-exec-2.0.1-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-exec-2.0.1-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build'
* S: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1'
* Messages for package dev-lang/python-exec-2.0.1-r1:
* ERROR: dev-lang/python-exec-2.0.1-r1::gentoo failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 93: Called src_configure
* environment, line 4040: Called autotools-utils_src_configure
* environment, line 905: Called econf '--docdir=/usr/share/doc/python-exec-2.0.1-r1' '--with-eprefix=' '--with-python-impls= jython2.5 jython2.7 pypy pypy3 python3.3 python3.4 python2.7'
* phase-helpers.sh, line 584: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=dev-lang/python-exec-2.0.1-r1::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-lang/python-exec-2.0.1-r1::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/temp/environment'.
* Working directory: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1_build'
* S: '/var/tmp/portage/dev-lang/python-exec-2.0.1-r1/work/python-exec-2.0.1'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20150113/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.uRx0W6/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2015-01-06 1:19 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2015-01-06 1:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/clean_locks to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/lock-helper.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/check-implicit-pointer-usage.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/chpathtool.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/eapi.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/save-ebuild-env.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/phase-helpers.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/isolated-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepalldocs to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dodir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/bsd/sed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/domo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/eqawarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ecompressdir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib.so to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/die to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dohtml to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/elog to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepstrip to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doheader to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/fperms to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/emake to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newsbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newheader to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/eerror to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepall to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/einfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doins to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newlib.so to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dodoc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/keepdir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doexe to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dobin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newlib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/unprivileged/chown to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/unprivileged/chgrp to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ewarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newins to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/portageq to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/xattr/install to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newinitd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dohard to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosym to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doinitd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newexe to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallstrip to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ecompress to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newdoc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/fowners to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/bashrc-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/dohtml.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/phase-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-ipc.py to 755
running install_data
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emaint.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/quickpkg.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emerge.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emirrordist.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/repoman.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/egencache.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/portage.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/xpak.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ebuild.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/make.conf.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man5
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/etc
copying cnf/etc-update.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc
copying cnf/dispatch-conf.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/etc/logrotate.d
copying cnf/logrotate.d/elog-save-summary -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc/logrotate.d
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage/config
copying cnf/make.conf.example -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
copying cnf/make.globals -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
copying cnf/repos.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage/config/sets
copying cnf/sets/portage.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config/sets
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/doc
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/doc/portage-2.2.14
copying NEWS -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/doc/portage-2.2.14
copying RELEASE-NOTES -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/doc/portage-2.2.14
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/lib/portage/bin
copying bin/deprecated-path -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/bin
running install_egg_info
Writing /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/python2.7/site-packages/portage-2.2.14-py2.7.egg-info
* python2_7: running distutils-r1_run_phase python_install_all
* Moving admin scripts to the correct directory
* Moving /usr/bin/archive-conf to /usr/sbin/archive-conf
mv: cannot stat '/var/tmp/portage/sys-apps/portage-2.2.14/image/usr/bin/archive-conf': No such file or directory
* ERROR: sys-apps/portage-2.2.14::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3981: Called distutils-r1_src_install
* environment, line 1216: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 290: Called multibuild_for_best_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2479: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2504: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2502: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 766: Called distutils-r1_run_phase 'python_install_all'
* environment, line 1181: Called python_install_all
* environment, line 3657: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.14::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.14::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* S: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* Messages for package sys-apps/portage-2.2.14:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* ERROR: sys-apps/portage-2.2.14::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3981: Called distutils-r1_src_install
* environment, line 1216: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 290: Called multibuild_for_best_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2479: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2504: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2502: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 766: Called distutils-r1_run_phase 'python_install_all'
* environment, line 1181: Called python_install_all
* environment, line 3657: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.14::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.14::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* S: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20150106/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.13TDh5/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2014-12-30 1:19 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2014-12-30 1:19 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/clean_locks to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/lock-helper.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/check-implicit-pointer-usage.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/chpathtool.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/eapi.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/save-ebuild-env.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/phase-helpers.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/isolated-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepalldocs to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dodir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/bsd/sed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/domo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/eqawarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ecompressdir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib.so to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/die to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dohtml to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/elog to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepstrip to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doheader to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/fperms to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/emake to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newsbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newheader to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/eerror to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepall to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/einfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doins to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newlib.so to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dodoc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/keepdir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doexe to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dobin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newlib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/unprivileged/chown to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/unprivileged/chgrp to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ewarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newins to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/portageq to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/xattr/install to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newinitd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dohard to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosym to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doinitd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newexe to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallstrip to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ecompress to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newdoc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/fowners to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/bashrc-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/dohtml.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/phase-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-ipc.py to 755
running install_data
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emaint.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/quickpkg.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emerge.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emirrordist.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/repoman.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/egencache.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/portage.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/xpak.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ebuild.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/make.conf.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man5
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/etc
copying cnf/etc-update.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc
copying cnf/dispatch-conf.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/etc/logrotate.d
copying cnf/logrotate.d/elog-save-summary -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc/logrotate.d
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage/config
copying cnf/make.conf.example -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
copying cnf/make.globals -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
copying cnf/repos.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage/config/sets
copying cnf/sets/portage.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config/sets
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/doc
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/doc/portage-2.2.14
copying NEWS -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/doc/portage-2.2.14
copying RELEASE-NOTES -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/doc/portage-2.2.14
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/lib/portage/bin
copying bin/deprecated-path -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/bin
running install_egg_info
Writing /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/python2.7/site-packages/portage-2.2.14-py2.7.egg-info
* python2_7: running distutils-r1_run_phase python_install_all
* Moving admin scripts to the correct directory
* Moving /usr/bin/archive-conf to /usr/sbin/archive-conf
mv: cannot stat '/var/tmp/portage/sys-apps/portage-2.2.14/image/usr/bin/archive-conf': No such file or directory
* ERROR: sys-apps/portage-2.2.14::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3951: Called distutils-r1_src_install
* environment, line 1210: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 290: Called multibuild_for_best_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2473: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2498: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2496: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 760: Called distutils-r1_run_phase 'python_install_all'
* environment, line 1175: Called python_install_all
* environment, line 3631: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.14::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.14::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* S: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* Messages for package sys-apps/portage-2.2.14:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* ERROR: sys-apps/portage-2.2.14::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3951: Called distutils-r1_src_install
* environment, line 1210: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 290: Called multibuild_for_best_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2473: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2498: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2496: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 760: Called distutils-r1_run_phase 'python_install_all'
* environment, line 1175: Called python_install_all
* environment, line 3631: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.14::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.14::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* S: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20141230/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.jUk3XD/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2014-12-23 1:20 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2014-12-23 1:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/clean_locks to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/lock-helper.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/check-implicit-pointer-usage.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/chpathtool.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/eapi.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/save-ebuild-env.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/phase-helpers.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/isolated-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepalldocs to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dodir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/bsd/sed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/domo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/eqawarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ecompressdir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib.so to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/die to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dohtml to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/elog to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepstrip to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doheader to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/fperms to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/emake to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newsbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newheader to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/eerror to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepall to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/einfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doins to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newlib.so to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dodoc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/keepdir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doexe to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dobin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newlib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/unprivileged/chown to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/unprivileged/chgrp to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ewarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newins to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/portageq to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/xattr/install to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newinitd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dohard to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosym to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doinitd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newexe to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallstrip to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ecompress to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newdoc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/fowners to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/bashrc-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/dohtml.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/phase-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-ipc.py to 755
running install_data
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emaint.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/quickpkg.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emerge.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emirrordist.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/repoman.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/egencache.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/portage.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/xpak.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ebuild.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/make.conf.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man5
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/etc
copying cnf/etc-update.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc
copying cnf/dispatch-conf.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/etc/logrotate.d
copying cnf/logrotate.d/elog-save-summary -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc/logrotate.d
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage/config
copying cnf/make.conf.example -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
copying cnf/make.globals -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
copying cnf/repos.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage/config/sets
copying cnf/sets/portage.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config/sets
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/doc
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/doc/portage-2.2.14
copying NEWS -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/doc/portage-2.2.14
copying RELEASE-NOTES -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/doc/portage-2.2.14
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/lib/portage/bin
copying bin/deprecated-path -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/bin
running install_egg_info
Writing /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/python2.7/site-packages/portage-2.2.14-py2.7.egg-info
* python2_7: running distutils-r1_run_phase python_install_all
* Moving admin scripts to the correct directory
* Moving /usr/bin/archive-conf to /usr/sbin/archive-conf
mv: cannot stat '/var/tmp/portage/sys-apps/portage-2.2.14/image/usr/bin/archive-conf': No such file or directory
* ERROR: sys-apps/portage-2.2.14::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3785: Called distutils-r1_src_install
* environment, line 1170: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 286: Called multibuild_for_best_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2401: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2426: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2424: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 720: Called distutils-r1_run_phase 'python_install_all'
* environment, line 1135: Called python_install_all
* environment, line 3495: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.14::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.14::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* S: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* Messages for package sys-apps/portage-2.2.14:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* ERROR: sys-apps/portage-2.2.14::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3785: Called distutils-r1_src_install
* environment, line 1170: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 286: Called multibuild_for_best_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2401: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2426: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2424: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 720: Called distutils-r1_run_phase 'python_install_all'
* environment, line 1135: Called python_install_all
* environment, line 3495: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.14::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.14::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* S: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20141223/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.JEvmr8/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2014-12-16 1:20 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2014-12-16 1:20 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/clean_locks to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/lock-helper.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/check-implicit-pointer-usage.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/chpathtool.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/eapi.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/save-ebuild-env.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/phase-helpers.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/isolated-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepalldocs to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dodir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/bsd/sed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/domo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/eqawarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ecompressdir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib.so to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/die to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dohtml to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/elog to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepstrip to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doheader to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/fperms to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dolib to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/emake to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newsbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newheader to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/eerror to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepall to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/einfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doins to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newlib.so to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doconfd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dodoc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/keepdir to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosed to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doexe to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dobin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newlib.a to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newenvd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/unprivileged/chown to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/unprivileged/chgrp to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ewarn to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newins to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/portageq to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/xattr/install to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newbin to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newinitd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dohard to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/dosym to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doinitd to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/doinfo to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newexe to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepallstrip to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/prepman to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/ecompress to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/newdoc to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-helpers/fowners to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/bashrc-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/dohtml.py to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/phase-functions.sh to 755
changing mode of /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/python2.7/ebuild-ipc.py to 755
running install_data
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emaint.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/quickpkg.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emerge.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/emirrordist.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/repoman.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/egencache.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man1
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/portage.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/xpak.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ebuild.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/make.conf.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/man5
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/ebuild.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/env-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/dispatch-conf.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/etc-update.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/fixpackages.1 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man1
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/man/ru/man5
copying /var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14-python2_7/man/ru/color.map.5 -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/man/ru/man5
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/etc
copying cnf/etc-update.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc
copying cnf/dispatch-conf.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/etc/logrotate.d
copying cnf/logrotate.d/elog-save-summary -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/etc/logrotate.d
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage/config
copying cnf/make.conf.example -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
copying cnf/make.globals -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
copying cnf/repos.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/portage/config/sets
copying cnf/sets/portage.conf -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/portage/config/sets
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/doc
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/share/doc/portage-2.2.14
copying NEWS -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/doc/portage-2.2.14
copying RELEASE-NOTES -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/share/doc/portage-2.2.14
creating /var/tmp/portage/sys-apps/portage-2.2.14/image/_python2.7/usr/lib/portage/bin
copying bin/deprecated-path -> /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/portage/bin
running install_egg_info
Writing /var/tmp/portage/sys-apps/portage-2.2.14/image//_python2.7/usr/lib/python2.7/site-packages/portage-2.2.14-py2.7.egg-info
* python2_7: running distutils-r1_run_phase python_install_all
* Moving admin scripts to the correct directory
* Moving /usr/bin/archive-conf to /usr/sbin/archive-conf
mv: cannot stat '/var/tmp/portage/sys-apps/portage-2.2.14/image/usr/bin/archive-conf': No such file or directory
* ERROR: sys-apps/portage-2.2.14::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3758: Called distutils-r1_src_install
* environment, line 1170: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 286: Called multibuild_for_best_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2390: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2415: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2413: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 720: Called distutils-r1_run_phase 'python_install_all'
* environment, line 1135: Called python_install_all
* environment, line 3468: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.14::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.14::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* S: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* Messages for package sys-apps/portage-2.2.14:
* Could not find a UTF-8 locale. This may trigger build failures in
* some python packages. Please ensure that a UTF-8 locale is listed in
* /etc/locale.gen and run locale-gen.
* ERROR: sys-apps/portage-2.2.14::gentoo failed (install phase):
* sbin scripts move failed!
*
* Call stack:
* ebuild.sh, line 93: Called src_install
* environment, line 3758: Called distutils-r1_src_install
* environment, line 1170: Called _distutils-r1_run_common_phase 'python_install_all'
* environment, line 286: Called multibuild_for_best_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2390: Called multibuild_foreach_variant '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2415: Called _multibuild_run '_python_multibuild_wrapper' 'distutils-r1_run_phase' 'python_install_all'
* environment, line 2413: Called _python_multibuild_wrapper 'distutils-r1_run_phase' 'python_install_all'
* environment, line 720: Called distutils-r1_run_phase 'python_install_all'
* environment, line 1135: Called python_install_all
* environment, line 3468: Called die
* The specific snippet of code:
* mv "${ED}usr/bin/${target}" "${ED}usr/sbin/${target}" || die "sbin scripts move failed!";
*
* If you need support, post the output of `emerge --info '=sys-apps/portage-2.2.14::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-apps/portage-2.2.14::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-apps/portage-2.2.14/temp/environment'.
* Working directory: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
* S: '/var/tmp/portage/sys-apps/portage-2.2.14/work/portage-2.2.14'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20141216/.catalyst_lock'
Full build log at /release/tmp/run/catalyst-auto.OwJjoE/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2014-11-19 3:43 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2014-11-19 3:43 UTC (permalink / raw
To: jmbsvicetto, gentoo-releng-autobuilds
i686-pc-linux-gnu-ar cru libdecnumber.a decNumber.o decContext.o decimal32.o decimal64.o decimal128.o bid2dpd_dpd2bid.o host-ieee32.o host-ieee64.o host-ieee128.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/macro.c: In function 'bool create_iso_definition(cpp_reader*, cpp_macro*)':
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/macro.c:2962:58: warning: format not a string literal and no format arguments [-Wformat-security]
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/macro.c:2975:58: warning: format not a string literal and no format arguments [-Wformat-security]
i686-pc-linux-gnu-ranlib libdecnumber.a
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/libdecnumber'
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o traditional.o -MT traditional.o -MMD -MP -MF .deps/traditional.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/traditional.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o symtab.o -MT symtab.o -MMD -MP -MF .deps/symtab.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/symtab.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o pch.o -MT pch.o -MMD -MP -MF .deps/pch.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/pch.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o init.o -MT init.o -MMD -MP -MF .deps/init.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/init.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o line-map.o -MT line-map.o -MMD -MP -MF .deps/line-map.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/line-map.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o lex.o -MT lex.o -MMD -MP -MF .deps/lex.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/lex.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o errors.o -MT errors.o -MMD -MP -MF .deps/errors.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/errors.c
i686-pc-linux-gnu-g++ -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -W -Wall -Wno-narrowing -Wwrite-strings -Wmissing-format-attribute -pedantic -Wno-long-long -fno-exceptions -fno-rtti -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/include -c -o directives-only.o -MT directives-only.o -MMD -MP -MF .deps/directives-only.Tpo /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/libcpp/directives-only.c
rm -f libcpp.a
i686-pc-linux-gnu-ar cru libcpp.a charset.o directives.o directives-only.o errors.o expr.o files.o identifiers.o init.o lex.o line-map.o macro.o mkdeps.o pch.o symtab.o traditional.o
i686-pc-linux-gnu-ranlib libcpp.a
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/libcpp'
make[3]: Entering directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh config.h
TARGET_CPU_DEFAULT="" \
HEADERS="options.h insn-constants.h config/vxworks-dummy.h config/i386/i386.h config/linux-android.h config/i386/unix.h config/i386/att.h config/dbxelf.h config/elfos.h config/gnu-user.h config/glibc-stdint.h config/linux.h config/i386/x86-64.h config/i386/gnu-user-common.h config/i386/gnu-user64.h config/i386/linux-common.h config/i386/linux64.h config/initfini-array.h defaults.h" DEFINES="LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 DEFAULT_LIBC=LIBC_GLIBC ANDROID_DEFAULT=0 TARGET_BI_ARCH=1" \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tm.h
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -Ibuild -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/build -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include \
-DBASEVER="\"4.8.3\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(Gentoo 4.8.3 p1.1, pie-0.5.9) \"" \
-DBUGURL="\"<https://bugs.gentoo.org/>\"" -o build/version.o /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/version.c
rm -f tmp-all-tree.def
echo '#include "tree.def"' > tmp-all-tree.def
echo 'END_OF_BASE_TREE_CODES' >> tmp-all-tree.def
echo '#include "c-family/c-common.def"' >> tmp-all-tree.def
ltf="/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/ada/gcc-interface/ada-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/cp/cp-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/java/java-tree.def /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/objc/objc-tree.def"; for f in $ltf; do \
echo "#include \"$f\""; \
done | sed 's|/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/||' >> tmp-all-tree.def
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-all-tree.def all-tree.def
echo timestamp > s-alltree
echo "i686-pc-linux-gnu-g++ -DEFAULT_SSP -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -static-libstdc++ -static-libgcc -Wl,-O1 -Wl,--as-needed" > checksum-options.tmp \
&& /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change checksum-options.tmp checksum-options
gawk -f /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.awk /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/i386-builtin-types.def > tmp-bt.inc
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../move-if-change tmp-bt.inc i386-builtin-types.inc
echo timestamp > s-i386-bt
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-nm.c
cp /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c gcc-ranlib.c
rm -f mm_malloc.h
cat /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
/bin/sh /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/mkconfig.sh tconfig.h
(echo "@set version-GCC 4.8.3"; \
if [ "" = "experimental" ]; \
then echo "@set DEVELOPMENT"; \
else echo "@clear DEVELOPMENT"; \
fi) > gcc-vers.texiT
echo @set srcdir /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc >> gcc-vers.texiT
if [ -n "(Gentoo 4.8.3 p1.1, pie-0.5.9) " ]; then \
echo "@set VERSION_PACKAGE (Gentoo 4.8.3 p1.1, pie-0.5.9) " >> gcc-vers.texiT; \
fi
echo "@set BUGURL @uref{https://bugs.gentoo.org/}" >> gcc-vers.texiT; \
mv -f gcc-vers.texiT gcc-vers.texi
echo timestamp > gpl.pod
perl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../contrib/texi2pod.pl /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/doc/include/gpl_v3.texi > gpl.pod
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ar\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gcc-ar.c -o gcc-ar.o
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"nm\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/wo
rk/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-nm.c -o gcc-nm.o
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DSTANDARD_STARTFILE_PREFIX=\"../../../\" -DSTANDARD_EXEC_PREFIX=\"/usr/lib/gcc/\" -DSTANDARD_LIBEXEC_PREFIX=\"/usr/libexec/gcc/\" -DDEFAULT_TARGET_VERSION=\"4.8.3\" -DDEFAULT_TARGET_MACHINE=\"i686-pc-linux-gnu\" -DSTANDARD_BINDIR_PREFIX=\"/usr/i686-pc-linux-gnu/gcc-bin/4.8.3/\" -DTOOLDIR_BASE_PREFIX=\"../../../../\" `test "X${SHLIB}" = "X" || test "yes" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` -DCONFIGURE_SPECS="\"\"" -DTARGET_MACHINE=\"i686-pc-linux-gnu\" -DPERSONALITY=\"ranlib\" -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.
3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace gcc-ranlib.c -o gcc-ranlib.o
i686-pc-linux-gnu-g++ -c -DEFAULT_SSP -DGENERATOR_FILE -DIN_GCC -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -I. -I. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/. -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libcpp/include -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libdecnumber/bid -I../libdecnumber -I/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/../libbacktrace /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c -o gengtype.o
/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3/gcc/gengtype.c:21:21: fatal error: bconfig.h: No such file or directory
compilation terminated.
Makefile:1070: recipe for target 'gengtype.o' failed
make[3]: *** [gengtype.o] Error 1
make[3]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build/gcc'
Makefile:4154: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:18414: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
Makefile:18729: recipe for target 'bootstrap-lean' failed
make: *** [bootstrap-lean] Error 2
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
* Messages for package sys-libs/timezone-data-2014i-r1:
* You do not have TIMEZONE set in /etc/timezone.
* Skipping auto-update of /etc/localtime.
* Messages for package sys-apps/sysvinit-2.88-r7:
* The last/lastb/mesg/mountpoint/sulogin/utmpdump/wall tools have been moved to
* sys-apps/util-linux. The pidof tool has been moved to sys-process/procps.
* Messages for package sys-apps/util-linux-2.24.1-r3:
* The mesg/wall/write tools have been disabled due to USE=-tty-helpers.
* Messages for package sys-apps/busybox-1.21.0:
* Could not locate user configfile, so we will save a default one
* You cannot have USE='static pam'. Assuming static is more important.
* Your configuration for sys-apps/busybox-1.21.0 has been saved in
* /etc/portage/savedconfig/sys-apps/busybox-1.21.0 for your editing pleasure.
* You can edit these files by hand and remerge this package with
* USE=savedconfig to customise the configuration.
* You can rename this file/directory to one of the following for
* its configuration to apply to multiple versions:
* ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
* [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
* Messages for package net-misc/openssh-6.6_p1-r1:
* dev-libs/openssl was built with 'bindist' - disabling ecdsa support
* Remember to merge your config files in /etc/ssh/ and then
* reload sshd: '/etc/init.d/sshd reload'.
* Messages for package sys-fs/udev-216:
* Unable to find kernel sources at /usr/src/linux
* Unable to calculate Linux Kernel version for build, attempting to use running version
*
* Starting from version >= 197 the new predictable network interface names are
* used by default, see:
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* http://cgit.freedesktop.org/systemd/systemd/tree/src/udev/udev-builtin-net_id.c
*
* Example command to get the information for the new interface name before booting
* (replace <ifname> with, for example, eth0):
* # udevadm test-builtin net_id /sys/class/net/<ifname> 2> /dev/null
*
* You can use either kernel parameter "net.ifnames=0", create empty
* file /etc/systemd/network/99-default.link, or symlink it to /dev/null
* to disable the feature.
*
* You need to restart udev as soon as possible to make the upgrade go
* into effect.
* The method you use to do this depends on your init system.
* For sys-apps/openrc users it is:
* # /etc/init.d/udev --nodeps restart
*
* For more information on udev on Gentoo, upgrading, writing udev rules, and
* fixing known issues visit:
* http://wiki.gentoo.org/wiki/Udev
* http://wiki.gentoo.org/wiki/Udev/upgrade
* Messages for package sys-libs/glibc-2.19-r1:
* Defaulting /etc/host.conf:multi to on
* Generating all locales; edit /etc/locale.gen to save time/space
* Messages for package sys-devel/gcc-4.8.3:
* ERROR: sys-devel/gcc-4.8.3::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-devel/gcc-4.8.3::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.8.3::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.8.3/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/build'
* S: '/var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-4.8.3'
*
* Please include /var/tmp/portage/sys-devel/gcc-4.8.3/work/gcc-build-logs.tar.bz2 in your bug report.
*
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1244, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst//modules/catalyst_support.py", line 541, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 218, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1304, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1249, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/home/release/buildroot/x86-dev/tmp/default/stage1-i686-20141119/.catalyst_lock'
Full build log at /home/release/tmp/run/catalyst-auto.UIGdeu/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2012-09-11 1:38 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2012-09-11 1:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.8.1
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/x86-auto.conf
Setting sharedir to config file value "/usr/lib/catalyst/"
Setting snapshot_cache to default value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "pkgcache autoresume snapcache seedcache kerncache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
!!! catalyst: Argument "update_seed" not recognized.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 204, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 25, in __init__
generic_target.__init__(self,myspec,addlargs)
File "modules/generic_target.py", line 11, in __init__
addl_arg_parse(myspec,addlargs,self.required_values,self.valid_values)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 691, in addl_arg_parse
raise CatalystError, '
Also: '.join(messages)
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.10665/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2012-09-04 1:38 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2012-09-04 1:38 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.8.1
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/x86-auto.conf
Setting sharedir to config file value "/usr/lib/catalyst/"
Setting snapshot_cache to default value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "pkgcache autoresume snapcache seedcache kerncache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
!!! catalyst: Argument "update_seed" not recognized.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 204, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 25, in __init__
generic_target.__init__(self,myspec,addlargs)
File "modules/generic_target.py", line 11, in __init__
addl_arg_parse(myspec,addlargs,self.required_values,self.valid_values)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 691, in addl_arg_parse
raise CatalystError, '
Also: '.join(messages)
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.27832/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2012-01-17 11:49 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2012-01-17 11:49 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
tar: ./usr/libexec/git-core/git-merge-recursive: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-fsck-objects: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-reflog: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-check-ref-format: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-checkout: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-merge-file: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-unpack-objects: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-shell: Cannot hard link to `./usr/bin/git-shell': No such file or directory
tar: ./usr/libexec/git-core/git-update-index: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-send-email: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-mergetool: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-ls-tree: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-show: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-cvsexportcommit: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-diff-index: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-rev-list: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-revert: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-cat-file: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-upload-archive: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-replace: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-bisect: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-get-tar-commit-id: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-verify-tag: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-help: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-log: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-stash: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-bundle: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-fsck: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-merge: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-annotate: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-parse-remote: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-config: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-fast-export: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-clean: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-push: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-status: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-grep: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-lost-found: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-ls-files: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-remote-http: Cannot hard link to `./usr/libexec/git-core/git-remote-ftps': No such file or directory
tar: ./usr/libexec/git-core/git-add--interactive: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-rerere: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-mv: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-commit: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-for-each-ref: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-diff: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-repo-config: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-remote-testgit: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-instaweb: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-bisect--helper: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-fetch: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-index-pack: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-mktag: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-notes: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-merge-resolve: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-send-pack: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-write-tree: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-gc: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-repack: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-stage: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-archive: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-count-objects: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-read-tree: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-pack-refs: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-hash-object: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-upload-pack: Cannot hard link to `./usr/bin/git-upload-pack': No such file or directory
tar: ./usr/libexec/git-core/git-sh-setup: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-patch-id: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-init-db: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-remote-https: Cannot hard link to `./usr/libexec/git-core/git-remote-ftps': No such file or directory
tar: ./usr/libexec/git-core/git-apply: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-cvsserver: Cannot hard link to `./usr/bin/git-cvsserver': No such file or directory
tar: ./usr/libexec/git-core/git-merge-base: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-describe: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-pack-objects: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-reset: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-format-patch: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-receive-pack: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-mailsplit: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-http-push: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-branch: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-show-ref: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-quiltimport: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-archimport: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-show-index: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-request-pull: Cannot open: No such file or directory
tar: ./usr/libexec/git-core/git-cherry-pick: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-update-server-info: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-fetch-pack: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-merge-tree: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-prune: Cannot hard link to `./usr/bin/git-upload-archive': No such file or directory
tar: ./usr/libexec/git-core/git-difftool--helper: Cannot open: No such file or directory
tar: ./usr/sbin: Cannot mkdir: No such file or directory
tar: ./usr/sbin/locale-gen: Cannot open: No such file or directory
tar: ./usr/sbin/savelog: Cannot open: No such file or directory
tar: ./usr/sbin/tracepath6: Cannot open: No such file or directory
tar: ./usr/sbin/ipg: Cannot open: No such file or directory
tar: ./usr/sbin/groupmems: Cannot open: No such file or directory
tar: ./usr/sbin/clockdiff: Cannot open: No such file or directory
tar: ./usr/sbin/backup.sh: Cannot open: No such file or directory
tar: ./usr/sbin/groupmod: Cannot open: No such file or directory
tar: ./usr/sbin/nscd: Cannot open: No such file or directory
tar: ./usr/sbin/partx: Cannot open: No such file or directory
tar: ./usr/sbin/rarpd: Cannot open: No such file or directory
tar: ./usr/sbin/tcpd: Cannot open: No such file or directory
tar: ./usr/sbin/makewhatis: Cannot open: No such file or directory
tar: ./usr/sbin/groupadd: Cannot open: No such file or directory
tar: ./usr/sbin/tracepath: Cannot open: No such file or directory
tar: ./usr/sbin/cracklib-check: Cannot open: No such file or directory
tar: ./usr/sbin/groupdel: Cannot open: No such file or directory
tar: ./usr/sbin/chpasswd: Cannot open: No such file or directory
tar: ./usr/sbin/chgpasswd: Cannot open: No such file or directory
tar: ./usr/sbin/cracklib-format: Cannot open: No such file or directory
tar: ./usr/sbin/userdel: Cannot open: No such file or directory
tar: ./usr/sbin/iconvconfig: Cannot open: No such file or directory
tar: ./usr/sbin/emaint: Cannot open: No such file or directory
tar: ./usr/sbin/delpart: Cannot open: No such file or directory
tar: ./usr/sbin/archive-conf: Cannot open: No such file or directory
tar: ./usr/sbin/filefrag: Cannot open: No such file or directory
tar: ./usr/sbin/pwconv: Cannot open: No such file or directory
tar: ./usr/sbin/tcpdchk: Cannot open: No such file or directory
tar: ./usr/sbin/grpconv: Cannot open: No such file or directory
tar: ./usr/sbin/perl-cleaner: Cannot open: No such file or directory
tar: ./usr/sbin/tcpdmatch: Cannot open: No such file or directory
tar: ./usr/sbin/update-ca-certificates: Cannot open: No such file or directory
tar: ./usr/sbin/env-update: Cannot open: No such file or directory
tar: ./usr/sbin/zic: Cannot open: No such file or directory
tar: ./usr/sbin/usermod: Cannot open: No such file or directory
tar: ./usr/sbin/mklost+found: Cannot open: No such file or directory
tar: ./usr/sbin/pwunconv: Cannot open: No such file or directory
tar: ./usr/sbin/rtcwake: Cannot open: No such file or directory
tar: ./usr/sbin/logoutd: Cannot open: No such file or directory
tar: ./usr/sbin/readprofile: Cannot open: No such file or directory
tar: ./usr/sbin/dump-remind: Cannot open: No such file or directory
tar: ./usr/sbin/tunelp: Cannot open: No such file or directory
tar: ./usr/sbin/rpcinfo: Cannot open: No such file or directory
tar: ./usr/sbin/zdump: Cannot open: No such file or directory
tar: ./usr/sbin/grpck: Cannot open: No such file or directory
tar: ./usr/sbin/addpart: Cannot open: No such file or directory
tar: ./usr/sbin/python-updater: Cannot open: No such file or directory
tar: ./usr/sbin/grpunconv: Cannot open: No such file or directory
tar: ./usr/sbin/uuidd: Cannot open: No such file or directory
tar: ./usr/sbin/create-cracklib-dict: Cannot open: No such file or directory
tar: ./usr/sbin/regenworld: Cannot open: No such file or directory
tar: ./usr/sbin/vigr: Cannot create symlink to `vipw': No such file or directory
tar: ./usr/sbin/emerge-webrsync: Cannot open: No such file or directory
tar: ./usr/sbin/fixpackages: Cannot open: No such file or directory
tar: ./usr/sbin/dispatch-conf: Cannot open: No such file or directory
tar: ./usr/sbin/try-from: Cannot open: No such file or directory
tar: ./usr/sbin/ldattach: Cannot open: No such file or directory
tar: ./usr/sbin/rmt: Cannot open: No such file or directory
tar: ./usr/sbin/e2freefrag: Cannot open: No such file or directory
tar: ./usr/sbin/traceroute6: Cannot open: No such file or directory
tar: ./usr/sbin/useradd: Cannot open: No such file or directory
tar: ./usr/sbin/vipw: Cannot open: No such file or directory
tar: ./usr/sbin/etc-update: Cannot open: No such file or directory
tar: ./usr/sbin/newusers: Cannot open: No such file or directory
tar: ./usr/sbin/sshd: Cannot open: No such file or directory
tar: ./usr/sbin/cracklib-unpacker: Cannot open: No such file or directory
tar: ./usr/sbin/cracklib-packer: Cannot open: No such file or directory
tar: ./usr/sbin/update-etc: Cannot create symlink to `etc-update': No such file or directory
tar: ./usr/sbin/update-env: Cannot create symlink to `env-update': No such file or directory
tar: ./usr/sbin/restore-tar: Cannot open: No such file or directory
tar: ./usr/sbin/backup-tar: Cannot open: No such file or directory
tar: ./usr/sbin/fdformat: Cannot open: No such file or directory
tar: ./usr/sbin/tftpd: Cannot open: No such file or directory
tar: ./usr/sbin/safe_finger: Cannot open: No such file or directory
tar: ./usr/sbin/pwck: Cannot open: No such file or directory
tar: ./usr/sbin/rdisc: Cannot open: No such file or directory
tar: ./usr/local: Cannot mkdir: No such file or directory
tar: ./usr/local/bin: Cannot mkdir: No such file or directory
tar: ./usr/local/bin/.keep: Cannot open: No such file or directory
tar: ./usr/local/lib: Cannot mkdir: No such file or directory
tar: ./usr/local/lib/.keep: Cannot open: No such file or directory
tar: ./usr/local/sbin: Cannot mkdir: No such file or directory
tar: ./usr/local/sbin/.keep: Cannot open: No such file or directory
tar: ./media: Cannot mkdir: No space left on device
tar: ./media/.keep: Cannot open: No such file or directory
tar: ./root: Cannot mkdir: No space left on device
tar: ./root/.keep: Cannot open: No such file or directory
tar: ./opt: Cannot mkdir: No space left on device
tar: ./opt/.keep: Cannot open: No such file or directory
tar: Exiting with failure status due to previous errors
!!! catalyst: Tarball extraction of /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2 to /release/buildroot/x86-dev/tmp/default/stage1-i686-20120117/ failed.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 729, in unpack
cmd(unpack_cmd,error_msg,env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20120117/.catalyst_lock'
Full build log at /tmp/catalyst-auto.26828/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2011-11-22 5:06 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2011-11-22 5:06 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[ ok ]
* 03_all_gcc43-java-nomulti.patch ...
[ ok ]
* 08_all_gcc-4.1-cross-compile.patch ...
[ ok ]
* 09_all_gcc-4.5-Wtrampolines.patch ...
[ ok ]
* 10_all_gcc-default-format-security.patch ...
[ ok ]
* 10_all_gcc-default-fortify-source.patch ...
[ ok ]
* 11_all_gcc-netbsd-symbolic.patch ...
[ ok ]
* 14_all_gcc-sparc64-bsd.patch ...
[ ok ]
* 15_all_gcc-libgomp-no-werror.patch ...
[ ok ]
* 22_all_4.6_pr45094_arm-dword-move.patch ...
[ ok ]
* 23_all_4.6_pr45886_ARM_PCS_VFP.patch ...
[ ok ]
* 30_all_gcc-4.5-ppc-msingle-pic-base.patch ...
[ ok ]
* 31_all_gcc-4.4-ppc-fpic-mrelocatable.patch ...
[ ok ]
* 40_all_gcc-4.4-libiberty.h-asprintf.patch ...
[ ok ]
* 47_all_arm-unbreak-armv4t.patch ...
[ ok ]
* 51_all_gcc-3.4-libiberty-pic.patch ...
[ ok ]
* 53_all_gcc4-superh-default-multilib.patch ...
[ ok ]
* 61_all_gcc4-ia64-noteGNUstack.patch ...
[ ok ]
* 74_all_sh-pr24836.patch ...
[ ok ]
* 93_all_gcc-4.5-cloog-dl.patch ...
[ ok ]
* 94_all_gcc-4.5-pch-nostdinc.patch ...
[ ok ]
* 95_all_arm-pr43440.patch ...
[ ok ]
* 99_all_testsuite-01-Wformat.patch ...
[ ok ]
* 99_all_testsuite-02-Wtrampolines.patch ...
[ ok ]
* 99_all_testsuite-03-check-lto.patch ...
[ ok ]
* Done with patching
* Applying uClibc patches ...
* 90_all_100-uclibc-conf.patch ...
[ ok ]
* 90_all_301-missing-execinfo_h.patch ...
[ ok ]
* 90_all_302-c99-snprintf.patch ...
[ ok ]
* 90_all_305-libmudflap-susv3-legacy.patch ...
[ ok ]
* Done with patching
* Applying pie patches ...
* 10_all_gcc45_configure.patch ...
[ ok ]
* 11_all_gcc44_config.in.patch ...
[ ok ]
* 12_all_gcc45_Makefile.in.patch ...
[ ok ]
* 20_all_gcc45_gcc.c.patch ...
[ ok ]
* 21_all_gcc44_decl-tls-model.patch ...
[ ok ]
* 30_all_gcc44_esp.h.patch ...
[ ok ]
* 33_all_gcc45_config_rs6000_linux64.h.patch ...
[ ok ]
* 35_all_gcc44_config_crtbegints.patch ...
[ ok ]
* 40_all_gcc44_cp_lang-specs.h.patch ...
[ ok ]
* 41_all_gcc44_objc_lang-specs.h.patch ...
[ ok ]
* 42_all_gcc44_objcp_lang-specs.h.patch ...
[ ok ]
* 60_all_gcc44_invoke.texi.patch ...
[ ok ]
* Done with patching
* Running elibtoolize in: gcc-4.5.3/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Using GNU config files from /usr/share/gnuconfig
* Updating libjava/libltdl/config.sub
[ ok ]
* Updating libjava/classpath/config.sub
[ ok ]
* Updating config.sub
[ ok ]
* Updating config.guess
[ ok ]
* Updating libjava/libltdl/config.guess
[ ok ]
* Updating libjava/classpath/config.guess
[ ok ]
* Fixing misc issues in configure files
* Applying gcc-configure-texinfo.patch ...
[ ok ]
* Touching generated files
* Touching gcc/cstamp-h.in
* Touching gcc/config.in
* Touching libjava/aclocal.m4
* Touching libjava/Makefile.in
* Touching libjava/configure
* Applying gcc-spec-env.patch ...
[ ok ]
* CFLAGS="-O2 -march=i686 -pipe"
* CXXFLAGS="-O2 -march=i686 -pipe"
* Configuring gcc ...
* We are migrating USE=nocxx to USE=cxx, but your USE settings do not make
* sense. Please make sure these two flags line up logically in your setup.
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* USE='cxx nocxx' and USE='-cxx -nocxx' make no sense
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 4602: Called toolchain_src_compile
* environment, line 5297: Called gcc_do_configure
* environment, line 2537: Called die
* The specific snippet of code:
* die "USE='cxx nocxx' and USE='-cxx -nocxx' make no sense";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/gcc-4.5.3'
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/timezone-data-2011l merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package dev-libs/libffi-3.0.10 merged to /tmp/stage1root/:
* Found a copy of second libffi in your system. Uninstall it before continuing.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-devel/gcc-4.5.3-r1 merged to /tmp/stage1root/:
* We are migrating USE=nocxx to USE=cxx, but your USE settings do not make
* sense. Please make sure these two flags line up logically in your setup.
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* USE='cxx nocxx' and USE='-cxx -nocxx' make no sense
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 4602: Called toolchain_src_compile
* environment, line 5297: Called gcc_do_configure
* environment, line 2537: Called die
* The specific snippet of code:
* die "USE='cxx nocxx' and USE='-cxx -nocxx' make no sense";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/gcc-4.5.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20111122/.catalyst_lock'
Full build log at /tmp/catalyst-auto.28609/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2011-11-15 4:52 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2011-11-15 4:52 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
[ ok ]
* 03_all_gcc43-java-nomulti.patch ...
[ ok ]
* 08_all_gcc-4.1-cross-compile.patch ...
[ ok ]
* 09_all_gcc-4.5-Wtrampolines.patch ...
[ ok ]
* 10_all_gcc-default-format-security.patch ...
[ ok ]
* 10_all_gcc-default-fortify-source.patch ...
[ ok ]
* 11_all_gcc-netbsd-symbolic.patch ...
[ ok ]
* 14_all_gcc-sparc64-bsd.patch ...
[ ok ]
* 15_all_gcc-libgomp-no-werror.patch ...
[ ok ]
* 22_all_4.6_pr45094_arm-dword-move.patch ...
[ ok ]
* 23_all_4.6_pr45886_ARM_PCS_VFP.patch ...
[ ok ]
* 30_all_gcc-4.5-ppc-msingle-pic-base.patch ...
[ ok ]
* 31_all_gcc-4.4-ppc-fpic-mrelocatable.patch ...
[ ok ]
* 40_all_gcc-4.4-libiberty.h-asprintf.patch ...
[ ok ]
* 47_all_arm-unbreak-armv4t.patch ...
[ ok ]
* 51_all_gcc-3.4-libiberty-pic.patch ...
[ ok ]
* 53_all_gcc4-superh-default-multilib.patch ...
[ ok ]
* 61_all_gcc4-ia64-noteGNUstack.patch ...
[ ok ]
* 74_all_sh-pr24836.patch ...
[ ok ]
* 93_all_gcc-4.5-cloog-dl.patch ...
[ ok ]
* 94_all_gcc-4.5-pch-nostdinc.patch ...
[ ok ]
* 95_all_arm-pr43440.patch ...
[ ok ]
* 99_all_testsuite-01-Wformat.patch ...
[ ok ]
* 99_all_testsuite-02-Wtrampolines.patch ...
[ ok ]
* 99_all_testsuite-03-check-lto.patch ...
[ ok ]
* Done with patching
* Applying uClibc patches ...
* 90_all_100-uclibc-conf.patch ...
[ ok ]
* 90_all_301-missing-execinfo_h.patch ...
[ ok ]
* 90_all_302-c99-snprintf.patch ...
[ ok ]
* 90_all_305-libmudflap-susv3-legacy.patch ...
[ ok ]
* Done with patching
* Applying pie patches ...
* 10_all_gcc45_configure.patch ...
[ ok ]
* 11_all_gcc44_config.in.patch ...
[ ok ]
* 12_all_gcc45_Makefile.in.patch ...
[ ok ]
* 20_all_gcc45_gcc.c.patch ...
[ ok ]
* 21_all_gcc44_decl-tls-model.patch ...
[ ok ]
* 30_all_gcc44_esp.h.patch ...
[ ok ]
* 33_all_gcc45_config_rs6000_linux64.h.patch ...
[ ok ]
* 35_all_gcc44_config_crtbegints.patch ...
[ ok ]
* 40_all_gcc44_cp_lang-specs.h.patch ...
[ ok ]
* 41_all_gcc44_objc_lang-specs.h.patch ...
[ ok ]
* 42_all_gcc44_objcp_lang-specs.h.patch ...
[ ok ]
* 60_all_gcc44_invoke.texi.patch ...
[ ok ]
* Done with patching
* Running elibtoolize in: gcc-4.5.3/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Using GNU config files from /usr/share/gnuconfig
* Updating libjava/libltdl/config.sub
[ ok ]
* Updating libjava/classpath/config.sub
[ ok ]
* Updating config.sub
[ ok ]
* Updating config.guess
[ ok ]
* Updating libjava/libltdl/config.guess
[ ok ]
* Updating libjava/classpath/config.guess
[ ok ]
* Fixing misc issues in configure files
* Applying gcc-configure-texinfo.patch ...
[ ok ]
* Touching generated files
* Touching gcc/cstamp-h.in
* Touching gcc/config.in
* Touching libjava/aclocal.m4
* Touching libjava/Makefile.in
* Touching libjava/configure
* Applying gcc-spec-env.patch ...
[ ok ]
* CFLAGS="-O2 -march=i686 -pipe"
* CXXFLAGS="-O2 -march=i686 -pipe"
* Configuring gcc ...
* We are migrating USE=nocxx to USE=cxx, but your USE settings do not make
* sense. Please make sure these two flags line up logically in your setup.
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* USE='cxx nocxx' and USE='-cxx -nocxx' make no sense
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 4591: Called toolchain_src_compile
* environment, line 5286: Called gcc_do_configure
* environment, line 2527: Called die
* The specific snippet of code:
* die "USE='cxx nocxx' and USE='-cxx -nocxx' make no sense";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/gcc-4.5.3'
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/timezone-data-2011l merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package dev-libs/libffi-3.0.10 merged to /tmp/stage1root/:
* Found a copy of second libffi in your system. Uninstall it before continuing.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-devel/gcc-4.5.3-r1 merged to /tmp/stage1root/:
* We are migrating USE=nocxx to USE=cxx, but your USE settings do not make
* sense. Please make sure these two flags line up logically in your setup.
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* USE='cxx nocxx' and USE='-cxx -nocxx' make no sense
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 4591: Called toolchain_src_compile
* environment, line 5286: Called gcc_do_configure
* environment, line 2527: Called die
* The specific snippet of code:
* die "USE='cxx nocxx' and USE='-cxx -nocxx' make no sense";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/gcc-4.5.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/stage1-i686-20111115/.catalyst_lock'
Full build log at /tmp/catalyst-auto.2644/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2011-08-23 1:33 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2011-08-23 1:33 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/x86-auto.conf
Setting sharedir to config file value "/usr/lib/catalyst/"
Setting snapshot_cache to default value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "pkgcache metadata_overlay autoresume snapcache seedcache kerncache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110823/
The autoresume path is /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20110823/
stage1 stage path is /release/buildroot/x86-dev/tmp/default/stage1-i686-20110823/tmp/stage1root
!!! catalyst: Cannot locate specified source_path: /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 207, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 173, in __init__
expand=0)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 573, in file_locate
raise CatalystError, "Cannot locate specified "+myfile+": "+settings[myfile]
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.19619/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2011-08-16 3:31 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2011-08-16 3:31 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.918
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/x86-auto.conf
Setting sharedir to config file value "/usr/lib/catalyst/"
Setting snapshot_cache to default value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "pkgcache metadata_overlay autoresume snapcache seedcache kerncache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110816/
The autoresume path is /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20110816/
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 207, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 140, in __init__
self.set_autoresume_path()
File "modules/generic_stage_target.py", line 443, in set_autoresume_path
os.makedirs(self.settings["autoresume_path"],0755)
File "/usr/lib64/python2.6/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20110816/'
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.16638/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread* [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec
@ 2011-05-17 3:07 catalyst
0 siblings, 0 replies; 151+ messages in thread
From: catalyst @ 2011-05-17 3:07 UTC (permalink / raw
To: releng, gentoo-releng-autobuilds
Catalyst, version 2.0.6.915
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1
Using command line specified Catalyst configuration file, /etc/catalyst/x86-auto.conf
Setting sharedir to config file value "/usr/lib/catalyst/"
Setting snapshot_cache to default value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "pkgcache metadata_overlay autoresume snapcache seedcache kerncache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Use of metadata_overlay module for portage enabled.
Envscript support enabled.
Using target: stage1
Building on amd64 for alternate personality type x86
stage1 root path is /tmp/stage1root
Source path set to /release/buildroot/x86-dev/builds/default/stage3-i686-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20110517/
The autoresume path is /release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20110517/
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 207, in build_target
mytarget=targetmap[addlargs["target"]](conf_values, addlargs)
File "modules/stage1_target.py", line 13, in __init__
generic_stage_target.__init__(self,spec,addlargs)
File "modules/generic_stage_target.py", line 140, in __init__
self.set_autoresume_path()
File "modules/generic_stage_target.py", line 443, in set_autoresume_path
os.makedirs(self.settings["autoresume_path"],0755)
File "/usr/lib64/python2.6/os.py", line 157, in makedirs
mkdir(name, mode)
OSError: [Errno 28] No space left on device: '/release/buildroot/x86-dev/tmp/default/.autoresume-stage1-i686-20110517/'
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
Full build log at /tmp/catalyst-auto.31943/log/i686_stage1.log
^ permalink raw reply [flat|nested] 151+ messages in thread
end of thread, other threads:[~2020-12-15 2:57 UTC | newest]
Thread overview: 151+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-11 3:07 [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - i686/stage1.spec catalyst
-- strict thread matches above, loose matches on Subject: below --
2020-12-15 2:57 catalyst
2020-11-30 23:49 catalyst
2020-11-23 23:44 catalyst
2020-09-30 3:00 catalyst
2020-09-23 3:00 catalyst
2020-09-16 3:00 catalyst
2020-09-09 3:00 catalyst
2020-09-02 3:00 catalyst
2020-08-26 3:00 catalyst
2020-08-19 3:00 catalyst
2020-08-12 3:00 catalyst
2020-08-05 3:00 catalyst
2020-07-29 3:00 catalyst
2020-07-22 3:00 catalyst
2020-07-15 3:00 catalyst
2020-07-08 3:00 catalyst
2020-07-01 3:00 catalyst
2020-06-24 3:00 catalyst
2020-06-17 3:00 catalyst
2020-06-10 3:00 catalyst
2020-06-03 3:00 catalyst
2020-05-27 3:00 catalyst
2020-05-20 3:00 catalyst
2020-05-16 11:18 catalyst
2020-05-13 3:00 catalyst
2020-05-06 3:00 catalyst
2020-04-29 3:00 catalyst
2020-01-08 4:04 catalyst
2019-12-10 21:48 catalyst
2019-09-04 3:00 catalyst
2019-02-14 16:06 catalyst
2019-01-09 6:43 catalyst
2019-01-03 13:28 catalyst
2019-01-03 13:17 catalyst
2019-01-02 21:48 catalyst
2019-01-02 18:44 catalyst
2019-01-01 3:54 catalyst
2018-09-07 12:37 catalyst
2018-09-07 12:36 catalyst
2018-07-08 1:38 catalyst
2018-07-08 9:15 ` M. J. Everitt
2018-04-13 21:57 catalyst
2018-04-11 21:57 catalyst
2018-04-09 21:57 catalyst
2018-04-06 21:57 catalyst
2018-04-02 21:55 catalyst
2018-02-17 0:55 catalyst
2018-02-15 0:55 catalyst
2018-02-13 0:55 catalyst
2018-02-10 0:34 catalyst
2018-02-03 0:32 catalyst
2018-02-01 1:52 catalyst
2018-01-31 6:44 catalyst
2018-01-31 3:01 catalyst
2018-01-30 0:28 catalyst
2018-01-27 0:23 catalyst
2018-01-25 0:21 catalyst
2018-01-24 5:03 catalyst
2018-01-23 0:19 catalyst
2018-01-20 0:22 catalyst
2017-12-25 22:12 catalyst
2017-12-22 22:11 catalyst
2017-12-20 22:11 catalyst
2017-12-18 23:07 catalyst
2017-10-26 3:26 catalyst
2017-10-26 3:25 catalyst
2017-10-26 3:25 catalyst
2017-10-26 3:25 catalyst
2017-10-26 3:25 catalyst
2017-09-27 3:11 catalyst
2017-09-20 3:09 catalyst
2017-09-13 3:09 catalyst
2017-09-05 1:19 catalyst
2017-03-22 8:04 catalyst
2017-03-15 9:24 catalyst
2017-03-08 3:01 catalyst
2017-03-01 3:00 catalyst
2017-02-22 3:10 catalyst
2017-02-15 3:11 catalyst
2017-02-08 3:11 catalyst
2017-02-01 3:10 catalyst
2017-01-25 3:11 catalyst
2017-01-18 3:11 catalyst
2017-01-11 3:08 catalyst
2017-01-04 3:09 catalyst
2016-12-28 3:09 catalyst
2016-12-21 3:09 catalyst
2016-12-14 3:08 catalyst
2016-12-07 3:08 catalyst
2016-11-30 3:01 catalyst
2016-11-23 3:01 catalyst
2016-11-16 3:01 catalyst
2016-11-09 3:01 catalyst
2016-11-02 3:01 catalyst
2016-10-26 3:02 catalyst
2016-10-19 3:01 catalyst
2016-10-12 3:01 catalyst
2016-10-05 3:02 catalyst
2016-09-28 7:44 catalyst
2016-09-21 7:29 catalyst
2016-09-14 3:00 catalyst
2016-09-07 3:00 catalyst
2016-08-31 3:00 catalyst
2016-08-24 3:00 catalyst
2016-08-17 3:00 catalyst
2016-08-10 3:01 catalyst
2016-08-03 3:01 catalyst
2016-07-27 3:03 catalyst
2016-07-20 3:01 catalyst
2016-05-18 3:02 catalyst
2016-05-11 3:02 catalyst
2015-12-23 3:05 catalyst
2015-12-01 2:29 catalyst
2015-08-19 5:20 catalyst
2015-08-05 5:02 catalyst
2015-08-04 6:45 catalyst
2015-07-22 5:21 catalyst
2015-07-08 4:29 catalyst
2015-06-24 8:12 catalyst
2015-06-17 3:08 catalyst
2015-06-03 3:06 catalyst
2015-06-01 1:25 catalyst
2015-05-20 3:07 catalyst
2015-05-13 3:06 catalyst
2015-05-06 3:06 catalyst
2015-04-29 3:06 catalyst
2015-04-22 3:47 catalyst
2015-03-10 6:21 catalyst
2015-02-22 2:38 catalyst
2015-02-17 1:18 catalyst
2015-02-10 1:19 catalyst
2015-02-04 3:07 catalyst
2015-02-03 1:19 catalyst
2015-01-28 3:08 catalyst
2015-01-27 1:16 catalyst
2015-01-20 1:18 catalyst
2015-01-13 1:19 catalyst
2015-01-06 1:19 catalyst
2014-12-30 1:19 catalyst
2014-12-23 1:20 catalyst
2014-12-16 1:20 catalyst
2014-11-19 3:43 catalyst
2012-09-11 1:38 catalyst
2012-09-04 1:38 catalyst
2012-01-17 11:49 catalyst
2011-11-22 5:06 catalyst
2011-11-15 4:52 catalyst
2011-08-23 1:33 catalyst
2011-08-16 3:31 catalyst
2011-05-17 3:07 catalyst
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox