[gentoo-releng-autobuilds] [x86-auto] Catalyst non-fatal build error - installcd-stage1.spec

[catalyst@poseidon.amd64.dev.gentoo.org]

Catalyst, version 2.0.7.1
Copyright 2003-2008 Gentoo Foundation
Copyright 2008-2011 various authors
Distributed under the GNU General Public License version 2.1

Using command line specified Catalyst configuration file, /etc/catalyst/x86-auto.conf
Setting sharedir to config file value "/usr/lib/catalyst/"
Setting snapshot_cache to default value "/var/tmp/catalyst/snapshot_cache"
Setting hash_function to config file value "crc32"
Setting storedir to config file value "/release/buildroot/x86-dev"
Setting portdir to config file value "/release/trees/portage-auto"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "pkgcache autoresume snapcache seedcache kerncache"
Autoresuming support enabled.
Kernel cache support enabled.
Package cache support enabled.
Seed cache support enabled.
Snapshot cache support enabled.
Envscript support enabled.
Using target: livecd-stage1
Building on amd64 for alternate personality type x86
Source path set to /release/buildroot/x86-dev/builds/default/stage3-i486-latest.tar.bz2
Caching snapshot to /var/tmp/catalyst/snapshot_cache/20120320/
The autoresume path is /release/buildroot/x86-dev/tmp/default/.autoresume-livecd-stage1-x86-20120320/
Location of the package cache is /release/buildroot/x86-dev/packages/default/livecd-stage1-x86-20120320/
Location of the kerncache is /release/buildroot/x86-dev/kerncache/default/livecd-stage1-x86-20120320/
Checking for processes running in chroot and killing them.
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-livecd-stage1-x86-20120320/
>>> Waiting 10 seconds before starting...
>>> (Control-C to abort)...
Purging Caches ... in: 10 9 8 7 6 5 4 3 2 1 
clearing autoresume ...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-livecd-stage1-x86-20120320/
clearing chroot ...
Emptying directory /release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20120320/
clearing package cache ...
purging the pkgcache ...
clearing kerncache ...
purging the kerncache ...
--- Running action sequence: unpack
Referenced SEEDCACHE does not appear to be a directory, trying to untar...
No Valid Resume point detected, cleaning up...
Removing AutoResume Points: ...
Emptying directory /release/buildroot/x86-dev/tmp/default/.autoresume-livecd-stage1-x86-20120320/
Emptying directory /release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20120320/

Starting tar extract from /release/buildroot/x86-dev/builds/default/stage3-i486-latest.tar.bz2
to /release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20120320/ (This may take some time) ...

--- Running action sequence: unpack_snapshot
Valid snapshot cache, skipping unpack of portage tree...
--- Running action sequence: config_profile_link
Configuring profile link...
--- Running action sequence: setup_confdir
--- Running action sequence: portage_overlay
--- Running action sequence: bind
--- Running action sequence: chroot_setup
Setting up chroot...

Warning!!!!
	Overriding certain env variables may cause catastrophic failure.
	If your build fails look here first as the possible problem.
	Catalyst assumes you know what you are doing when setting
		these variables.
	Catalyst Maintainers use VERY minimal envscripts if used at all
	You have been warned


Warning!!!  
	The use of -* in livecd/use will cause portage to ignore
	package.use in the profile and portage_confdir. You've been warned!
--- Running action sequence: setup_environment
--- Running action sequence: build_packages
copying livecd-stage1-chroot.sh to /release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20120320/tmp/
copying chroot-functions.sh to /release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20120320/tmp/
Running livecd-stage1-chroot.sh in chroot /release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20120320/
>>> Regenerating /etc/ld.so.cache...
emerge --quiet --usepkg --buildpkg --newuse --oneshot --nodeps sys-apps/portage

Performing Global Updates
(Could take a couple of minutes if you have a lot of binary packages.)


emerge --quiet --usepkg --buildpkg --newuse app-accessibility/brltty app-admin/hddtemp app-admin/passook app-admin/pwgen app-admin/syslog-ng app-arch/unzip app-arch/xz-utils app-crypt/gnupg app-editors/mg app-misc/screen app-misc/vlock app-portage/mirrorselect app-text/wgetpaste media-gfx/fbgrab net-analyzer/traceroute net-dialup/mingetty net-dialup/pptpclient net-dialup/rp-pppoe net-fs/mount-cifs net-fs/nfs-utils net-irc/irssi net-misc/dhcpcd net-misc/iputils net-misc/ntp net-misc/rdate net-misc/vconfig net-proxy/dante net-proxy/ntlmaps net-proxy/tsocks net-wireless/b43-fwcutter net-wireless/ipw2100-firmware net-wireless/ipw2200-firmware net-wireless/iwl3945-ucode net-wireless/iwl4965-ucode net-wireless/iwl5000-ucode net-wireless/prism54-firmware net-wireless/rfkill net-wireless/wireless-tools net-wireless/wpa_supplicant net-wireless/zd1201-firmware net-wireless/zd1211-firmware sys-apps/apmd sys-apps/dmidecode sys-apps/ethtool sys-apps/fxload sys-apps/hdparm sys-apps/hwsetup
  sys-apps/iproute2 sys-apps/memtester sys-apps/netplug sys-apps/sdparm sys-block/eject sys-block/parted sys-block/partimage sys-block/qla-fc-firmware sys-fs/cryptsetup sys-fs/dmraid sys-fs/dosfstools sys-fs/e2fsprogs sys-fs/jfsutils sys-fs/lsscsi sys-fs/lvm2 sys-fs/mac-fdisk sys-fs/mdadm sys-fs/multipath-tools sys-fs/ntfsprogs sys-fs/reiserfsprogs sys-fs/xfsprogs sys-libs/gpm sys-power/acpid www-client/links app-misc/livecd-tools


!!! Problem resolving dependencies for www-client/links

The following keyword changes are necessary to proceed:
#required by sys-fs/ntfsprogs (argument)
=sys-fs/ntfsprogs-2.0.0-r3 ~x86

The following mask changes are necessary to proceed:
#required by sys-fs/ntfsprogs (argument)
# /usr/portage/profiles/package.mask:
# Samuli Suominen <ssuominen@gentoo.org> (11 Mar 2012)
# Replaced by USE="ntfsprogs" in sys-fs/ntfs3g
# Removal in 30 days wrt bug 384865
=sys-fs/ntfsprogs-2.0.0-r3

Use --autounmask-write to write changes to config files (honoring CONFIG_PROTECT).

!!! The ebuild selected to satisfy "www-client/links" has unmet requirements.
- www-client/links-2.5::gentoo USE="fbcon livecd ssl unicode -X -bzip2 -directfb -gpm -jpeg -lzma -suid -svga -tiff -zlib"

  The following REQUIRED_USE flag constraints are unsatisfied:
    fbcon? ( jpeg gpm ) livecd? ( jpeg gpm )

  The above constraints are a subset of the following complete expression:
    fbcon? ( jpeg gpm ) livecd? ( jpeg gpm ) svga? ( suid )


!!! catalyst: Error in attempt to build packages


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1362, in build_packages
    "Error in attempt to build packages",env=self.env)
  File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
    raise CatalystError,myexc
CatalystError
None

!!! catalyst: livecdbuild aborting due to error.

Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
    mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
    apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1367, in build_packages
    "build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target livecd-stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/default/livecd-stage1-x86-20120320/.catalyst_lock'



Full build log at /tmp/catalyst-auto.1912/log/installcd-stage1.log