From: catalyst@poseidon.amd64.dev.gentoo.org
To: releng@gentoo.org,gentoo-releng-autobuilds@lists.gentoo.org
Subject: [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage1.spec
Date: Tue, 15 Nov 2011 06:40:07 +0000 (UTC) [thread overview]
Message-ID: <20111115064007.7A2CE1435E3@poseidon.amd64.dev.gentoo.org> (raw)
[ ok ]
* 08_all_gcc-4.1-cross-compile.patch ...
[ ok ]
* 09_all_gcc-4.5-Wtrampolines.patch ...
[ ok ]
* 10_all_gcc-default-format-security.patch ...
[ ok ]
* 10_all_gcc-default-fortify-source.patch ...
[ ok ]
* 11_all_gcc-netbsd-symbolic.patch ...
[ ok ]
* 14_all_gcc-sparc64-bsd.patch ...
[ ok ]
* 15_all_gcc-libgomp-no-werror.patch ...
[ ok ]
* 22_all_4.6_pr45094_arm-dword-move.patch ...
[ ok ]
* 23_all_4.6_pr45886_ARM_PCS_VFP.patch ...
[ ok ]
* 30_all_gcc-4.5-ppc-msingle-pic-base.patch ...
[ ok ]
* 31_all_gcc-4.4-ppc-fpic-mrelocatable.patch ...
[ ok ]
* 40_all_gcc-4.4-libiberty.h-asprintf.patch ...
[ ok ]
* 47_all_arm-unbreak-armv4t.patch ...
[ ok ]
* 51_all_gcc-3.4-libiberty-pic.patch ...
[ ok ]
* 53_all_gcc4-superh-default-multilib.patch ...
[ ok ]
* 61_all_gcc4-ia64-noteGNUstack.patch ...
[ ok ]
* 74_all_sh-pr24836.patch ...
[ ok ]
* 93_all_gcc-4.5-cloog-dl.patch ...
[ ok ]
* 94_all_gcc-4.5-pch-nostdinc.patch ...
[ ok ]
* 95_all_arm-pr43440.patch ...
[ ok ]
* 99_all_testsuite-01-Wformat.patch ...
[ ok ]
* 99_all_testsuite-02-Wtrampolines.patch ...
[ ok ]
* 99_all_testsuite-03-check-lto.patch ...
[ ok ]
* Done with patching
* Applying uClibc patches ...
* 90_all_100-uclibc-conf.patch ...
[ ok ]
* 90_all_301-missing-execinfo_h.patch ...
[ ok ]
* 90_all_302-c99-snprintf.patch ...
[ ok ]
* 90_all_305-libmudflap-susv3-legacy.patch ...
[ ok ]
* Done with patching
* Applying pie patches ...
* 10_all_gcc45_configure.patch ...
[ ok ]
* 11_all_gcc44_config.in.patch ...
[ ok ]
* 12_all_gcc45_Makefile.in.patch ...
[ ok ]
* 20_all_gcc45_gcc.c.patch ...
[ ok ]
* 21_all_gcc44_decl-tls-model.patch ...
[ ok ]
* 30_all_gcc44_esp.h.patch ...
[ ok ]
* 33_all_gcc45_config_rs6000_linux64.h.patch ...
[ ok ]
* 35_all_gcc44_config_crtbegints.patch ...
[ ok ]
* 40_all_gcc44_cp_lang-specs.h.patch ...
[ ok ]
* 41_all_gcc44_objc_lang-specs.h.patch ...
[ ok ]
* 42_all_gcc44_objcp_lang-specs.h.patch ...
[ ok ]
* 60_all_gcc44_invoke.texi.patch ...
[ ok ]
* Done with patching
* updating configuration to build hardened GCC
* Updating gcc to use automatic PIE + SSP building ...
* Running elibtoolize in: gcc-4.5.3/
* Applying portage/2.2 patch ...
* Applying sed/1.5.6 patch ...
* Applying as-needed/2.2.6 patch ...
* Using GNU config files from /usr/share/gnuconfig
* Updating libjava/libltdl/config.sub
[ ok ]
* Updating libjava/classpath/config.sub
[ ok ]
* Updating config.sub
[ ok ]
* Updating config.guess
[ ok ]
* Updating libjava/libltdl/config.guess
[ ok ]
* Updating libjava/classpath/config.guess
[ ok ]
* Fixing misc issues in configure files
* Applying gcc-configure-texinfo.patch ...
[ ok ]
* Touching generated files
* Touching gcc/cstamp-h.in
* Touching gcc/config.in
* Touching libjava/aclocal.m4
* Touching libjava/Makefile.in
* Touching libjava/configure
* Applying gcc-spec-env.patch ...
[ ok ]
* CFLAGS="-O2 -march=i686 -pipe"
* CXXFLAGS="-O2 -march=i686 -pipe"
* Configuring gcc ...
* We are migrating USE=nocxx to USE=cxx, but your USE settings do not make
* sense. Please make sure these two flags line up logically in your setup.
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* USE='cxx nocxx' and USE='-cxx -nocxx' make no sense
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 4592: Called toolchain_src_compile
* environment, line 5287: Called gcc_do_configure
* environment, line 2528: Called die
* The specific snippet of code:
* die "USE='cxx nocxx' and USE='-cxx -nocxx' make no sense";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/gcc-4.5.3'
* Messages for package sys-apps/coreutils-8.7 merged to /tmp/stage1root/:
* Make sure you run 'hash -r' in your active shells.
* You should also re-source your shell settings for LS_COLORS
* changes, such as: source /etc/profile
* Messages for package sys-libs/timezone-data-2011l merged to /tmp/stage1root/:
* You do not have TIMEZONE set in /tmp/stage1root/etc/timezone.
* Setting /tmp/stage1root/etc/localtime to Factory.
* Messages for package dev-libs/libffi-3.0.10 merged to /tmp/stage1root/:
* Found a copy of second libffi in your system. Uninstall it before continuing.
* Messages for package net-misc/wget-1.12-r3 merged to /tmp/stage1root/:
* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
* Messages for package sys-devel/gcc-4.5.3-r1 merged to /tmp/stage1root/:
* We are migrating USE=nocxx to USE=cxx, but your USE settings do not make
* sense. Please make sure these two flags line up logically in your setup.
* ERROR: sys-devel/gcc-4.5.3-r1 failed (compile phase):
* USE='cxx nocxx' and USE='-cxx -nocxx' make no sense
*
* Call stack:
* ebuild.sh, line 56: Called src_compile
* environment, line 4592: Called toolchain_src_compile
* environment, line 5287: Called gcc_do_configure
* environment, line 2528: Called die
* The specific snippet of code:
* die "USE='cxx nocxx' and USE='-cxx -nocxx' make no sense";
*
* If you need support, post the output of 'emerge --info =sys-devel/gcc-4.5.3-r1',
* the complete build log and the output of 'emerge -pqv =sys-devel/gcc-4.5.3-r1'.
* The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/temp/environment'.
* S: '/var/tmp/portage/sys-devel/gcc-4.5.3-r1/work/gcc-4.5.3'
!!! catalyst: run script failed.
Traceback (most recent call last):
File "modules/generic_stage_target.py", line 1207, in run_local
"run script failed.",env=self.env)
File "/usr/lib64/catalyst/modules/catalyst_support.py", line 542, in cmd
raise CatalystError,myexc
CatalystError
None
!!! catalyst: Stage build aborting due to error.
Traceback (most recent call last):
File "/usr/lib64/catalyst/catalyst", line 209, in build_target
mytarget.run()
File "modules/generic_stage_target.py", line 1263, in run
apply(getattr(self,x))
File "modules/generic_stage_target.py", line 1212, in run_local
raise CatalystError,"Stage build aborting due to error."
CatalystError
!!! catalyst: Error encountered during run of target stage1
Catalyst aborting....
lockfile does not exist '/release/buildroot/x86-dev/tmp/hardened/stage1-i686-hardened-20111115/.catalyst_lock'
Full build log at /tmp/catalyst-auto.2644/log/hardened_stage1.log
next reply other threads:[~2011-11-15 6:40 UTC|newest]
Thread overview: 180+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-15 6:40 catalyst [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-09-30 3:00 [gentoo-releng-autobuilds] [x86-auto] Catalyst fatal build error - hardened/stage1.spec catalyst
2020-09-23 3:00 catalyst
2020-09-16 3:00 catalyst
2020-09-09 3:00 catalyst
2020-09-02 3:00 catalyst
2020-08-26 3:00 catalyst
2020-08-19 3:00 catalyst
2020-08-12 3:00 catalyst
2020-08-05 3:00 catalyst
2020-07-29 3:00 catalyst
2020-07-22 3:00 catalyst
2020-07-15 3:00 catalyst
2020-07-08 3:00 catalyst
2020-07-01 3:00 catalyst
2020-06-24 3:00 catalyst
2020-06-17 3:00 catalyst
2020-06-10 3:00 catalyst
2020-06-03 3:00 catalyst
2020-05-27 3:00 catalyst
2020-05-20 3:00 catalyst
2020-05-16 11:18 catalyst
2020-05-13 3:00 catalyst
2020-05-06 3:01 catalyst
2020-04-29 3:00 catalyst
2020-01-08 4:04 catalyst
2019-09-04 3:00 catalyst
2019-04-20 12:54 catalyst
2019-01-09 7:13 catalyst
2019-01-03 13:28 catalyst
2019-01-03 13:17 catalyst
2019-01-02 21:48 catalyst
2019-01-02 18:44 catalyst
2019-01-02 8:06 catalyst
2018-12-26 6:52 catalyst
2018-12-19 6:54 catalyst
2018-10-18 21:45 catalyst
2018-09-07 12:37 catalyst
2018-09-07 12:36 catalyst
2018-04-13 22:00 catalyst
2018-04-11 22:01 catalyst
2018-04-09 22:01 catalyst
2018-04-06 22:01 catalyst
2018-04-02 21:59 catalyst
2018-02-17 2:36 catalyst
2018-02-15 2:36 catalyst
2018-02-13 2:33 catalyst
2018-02-10 2:04 catalyst
2018-02-03 1:57 catalyst
2018-02-01 3:19 catalyst
2018-01-31 7:20 catalyst
2018-01-31 3:02 catalyst
2018-01-30 1:54 catalyst
2018-01-27 1:46 catalyst
2018-01-25 1:44 catalyst
2018-01-24 6:07 catalyst
2018-01-23 1:42 catalyst
2018-01-20 1:45 catalyst
2017-12-25 22:12 catalyst
2017-12-22 22:11 catalyst
2017-12-20 22:11 catalyst
2017-12-18 23:07 catalyst
2017-10-26 3:26 catalyst
2017-10-26 3:26 catalyst
2017-10-26 3:25 catalyst
2017-10-26 3:25 catalyst
2017-09-27 3:16 catalyst
2017-09-20 3:15 catalyst
2017-09-13 3:14 catalyst
2017-09-05 1:19 catalyst
2017-03-08 3:01 catalyst
2017-03-01 3:00 catalyst
2017-02-22 3:22 catalyst
2017-02-15 3:23 catalyst
2017-02-08 3:22 catalyst
2017-02-01 3:22 catalyst
2017-01-25 3:22 catalyst
2017-01-18 3:21 catalyst
2017-01-11 3:17 catalyst
2017-01-04 3:18 catalyst
2016-12-28 3:17 catalyst
2016-12-21 3:17 catalyst
2016-12-14 3:16 catalyst
2016-12-07 3:17 catalyst
2016-11-30 3:02 catalyst
2016-11-23 3:02 catalyst
2016-11-16 3:02 catalyst
2016-11-09 3:02 catalyst
2016-11-02 3:02 catalyst
2016-10-26 3:03 catalyst
2016-10-19 3:03 catalyst
2016-10-12 3:02 catalyst
2016-10-05 3:03 catalyst
2016-09-14 3:01 catalyst
2016-09-07 3:01 catalyst
2016-08-31 3:01 catalyst
2016-08-24 3:01 catalyst
2016-08-17 3:01 catalyst
2016-08-10 3:01 catalyst
2016-08-03 3:01 catalyst
2016-07-27 3:04 catalyst
2016-07-20 3:01 catalyst
2016-05-18 3:04 catalyst
2016-05-11 3:04 catalyst
2015-12-23 3:07 catalyst
2015-12-01 3:10 catalyst
2015-08-19 6:21 catalyst
2015-08-12 10:18 catalyst
2015-07-29 8:24 catalyst
2015-06-19 5:18 catalyst
2015-06-17 3:09 catalyst
2015-06-03 3:06 catalyst
2015-06-01 1:26 catalyst
2015-05-20 3:08 catalyst
2015-05-13 3:08 catalyst
2015-05-06 3:07 catalyst
2015-04-29 3:07 catalyst
2015-04-22 5:23 catalyst
2015-02-22 2:38 catalyst
2015-02-17 1:19 catalyst
2015-02-11 3:08 catalyst
2015-02-10 1:21 catalyst
2015-02-04 3:08 catalyst
2015-02-03 1:20 catalyst
2015-01-28 3:08 catalyst
2015-01-27 1:18 catalyst
2015-01-20 1:19 catalyst
2015-01-13 1:20 catalyst
2015-01-06 1:20 catalyst
2014-12-30 1:20 catalyst
2014-12-23 1:21 catalyst
2014-12-16 1:21 catalyst
2014-12-09 8:24 catalyst
2014-12-02 8:29 catalyst
2014-11-25 8:25 catalyst
2014-11-18 9:48 catalyst
2014-11-12 8:35 catalyst
2014-11-11 8:26 catalyst
2014-11-04 10:14 catalyst
2014-10-28 8:14 catalyst
2014-10-21 8:42 catalyst
2014-10-14 8:15 catalyst
2014-10-07 8:09 catalyst
2014-09-30 8:05 catalyst
2014-09-23 8:06 catalyst
2014-09-16 8:15 catalyst
2014-09-09 7:44 catalyst
2014-09-02 8:05 catalyst
2014-08-26 8:07 catalyst
2014-08-19 8:13 catalyst
2014-08-12 10:32 catalyst
2014-08-12 9:22 catalyst
2014-08-05 8:39 catalyst
2014-08-05 5:01 catalyst
2014-07-29 9:04 catalyst
2014-07-29 8:16 catalyst
2014-07-22 9:03 catalyst
2014-07-22 8:18 catalyst
2014-07-08 9:09 catalyst
2014-07-01 5:14 catalyst
2012-09-18 1:15 catalyst
2012-09-11 1:38 catalyst
2012-09-04 1:38 catalyst
2012-02-22 5:04 catalyst
2012-02-15 4:45 catalyst
2012-02-08 4:49 catalyst
2012-02-01 4:44 catalyst
2012-01-25 4:44 catalyst
2012-01-17 11:49 catalyst
2012-01-11 5:06 catalyst
2012-01-04 5:07 catalyst
2011-12-27 19:04 catalyst
2011-12-20 19:04 catalyst
2011-12-14 4:46 catalyst
2011-11-22 6:09 catalyst
2011-08-23 1:33 catalyst
2011-08-16 3:31 catalyst
2011-05-17 3:07 catalyst
2011-02-01 22:02 catalyst
2011-01-25 19:54 catalyst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111115064007.7A2CE1435E3@poseidon.amd64.dev.gentoo.org \
--to=catalyst@poseidon.amd64.dev.gentoo.org \
--cc=gentoo-releng-autobuilds@lists.gentoo.org \
--cc=releng@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox