[gentoo-ppc-user] I can't bootstrap

[gentoo-ppc-user] I can't bootstrap

[ArchAngel_Nix]

[-- Attachment #1: Type: text/plain, Size: 1080 bytes --]

I am hoping someone can make some sense of this. I am installing Gentoo 
2004.2 (Universal Install LiveCD) on my PowerMac G4 (AGP). I have been 
following the Gentoo Handbook. I have chosen stage 1 and getting stuck 
on bootstraping. I downloaded all the soucres, but when I run 
scripts/bootstrap.sh I get this dump below: (I ran scripts/bootstrap.sh 
-f previous without error)

 >>> Source unpacked.
Could not run/locate "gcc"
./create-localdecls
Checking truncate argument type... off_t
Checking libc version... Could not run/locate "gcc"
ldd: ./libctest: No such file or directory

rm: cannot remove `libctest': No such file or directory

gcc   -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -Wall -c libsandbox.c
Could not run/locate "gcc"
make: *** [libsandbox.o] Error 1

!!! ERROR: sys-apps/portage-2.0.50-r10 failed.
!!! Function src_compile, Line 71, Exitcode 2
!!! (no error message)

What do I need to do to get his machine on it's feet? This is the 4 
time I have tried to install Gentoo and has failed. (I have tried 
stages 1, 2, & 3 with no success)

Thanks for the help.

[-- Attachment #2: Type: text/enriched, Size: 1121 bytes --]

I am hoping someone can make some sense of this. I am installing
Gentoo 2004.2 (Universal Install LiveCD) on my PowerMac G4 (AGP). I
have been following the Gentoo Handbook. I have chosen stage 1 and
getting stuck on bootstraping. I downloaded all the soucres, but when
I run <italic>scripts/bootstrap.sh</italic> I get this dump below: (I
ran <italic>scripts/bootstrap.sh -f</italic> previous without error)


>>> Source unpacked.

Could not run/locate "gcc"

./create-localdecls

Checking truncate argument type... off_t

Checking libc version... Could not run/locate "gcc"

ldd: ./libctest: No such file or directory


rm: cannot remove `libctest': No such file or directory


gcc   -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -Wall -c libsandbox.c

Could not run/locate "gcc"

make: *** [libsandbox.o] Error 1


!!! ERROR: sys-apps/portage-2.0.50-r10 failed.

!!! Function src_compile, Line 71, Exitcode 2

!!! (no error message)


What do I need to do to get his machine on it's feet? This is the 4
time I have tried to install Gentoo and has failed. (I have tried
stages 1, 2, & 3 with no success)


Thanks for the help.

Re: [gentoo-ppc-user] I can't bootstrap

[ArchAngel_Nix]

[-- Attachment #1: Type: text/plain, Size: 1453 bytes --]

Well I went into /etc/make.conf and added -3.3.3 to end of the CHOST  
line:  (I looked in the directory /etc/env.d/gcc/ for the version I  
had)

CHOST="powerpc-unknown-linux-gnu-3.3.3"

Same result. Is there something more I need to do, or more info I need  
to provide? Thanks again.

On Sep 5, 2004, at 4:40 PM, Przemysław Maciąg wrote:

> W liście z nie, 05-09-2004, godz. 21:33, ArchAngel_Nix pisze:
>> I am hoping someone can make some sense of this. I am installingGentoo
>> 2004.2 (Universal Install LiveCD) on my PowerMac G4 (AGP). Ihave been
>> following the Gentoo Handbook. I have chosen stage 1 andgetting stuck
>> on bootstraping. I downloaded all the soucres, but whenI run
>> scripts/bootstrap.sh I get this dump below: (Iran scripts/bootstrap.sh
>> -f previous without error)
>>
>>>>> Source unpacked.
>> Could not run/locate "gcc"
> I had an similar error last weak. This helped me:
> http://bugs.gentoo.org/show_bug.cgi?id=25608
>
> Regards,
> Przemek
> --  
> ----------------------------------------------------------------------- 
> -
> Email:pmaciag(at)inx.pm.waw.pl  |  Email:troll(at)trollmoors.dyndns.org
>     RLU#: 303556 | JID#: troll@chrome.pl | JID#: przemo@jabber.org
>             pgp: http://www.pm.waw.pl/~pmaciag/przemo.gpg
>  "Życie jest jak pudełko czekoladek... Nigdy nie wiesz na co trafisz."
> ----------------------------------------------------------------------- 
> -

[-- Attachment #2: Type: text/enriched, Size: 1594 bytes --]

Well I went into /etc/make.conf and added -3.3.3 to end of the CHOST
line:  (I looked in the directory
/<fontfamily><param>Verdana</param>etc/env.d/gcc/ for the version I
had)</fontfamily>

<italic>

CHOST="powerpc-unknown-linux-gnu-3.3.3"</italic>


Same result. Is there something more I need to do, or more info I need
to provide? Thanks again.


On Sep 5, 2004, at 4:40 PM, Przemysław Maciąg wrote:


<excerpt>W liście z nie, 05-09-2004, godz. 21:33, ArchAngel_Nix pisze: 

<excerpt>I am hoping someone can make some sense of this. I am
installingGentoo

2004.2 (Universal Install LiveCD) on my PowerMac G4 (AGP). Ihave been

following the Gentoo Handbook. I have chosen stage 1 andgetting stuck

on bootstraping. I downloaded all the soucres, but whenI run

scripts/bootstrap.sh I get this dump below: (Iran scripts/bootstrap.sh

-f previous without error)


<excerpt><excerpt><excerpt>Source unpacked.

</excerpt></excerpt></excerpt>Could not run/locate "gcc"

</excerpt>I had an similar error last weak. This helped me:

http://bugs.gentoo.org/show_bug.cgi?id=25608


Regards,

Przemek

-- 

------------------------------------------------------------------------

Email:pmaciag(at)inx.pm.waw.pl  |  Email:troll(at)trollmoors.dyndns.org

    RLU#: 303556 | JID#: troll@chrome.pl | JID#: przemo@jabber.org

            pgp: http://www.pm.waw.pl/~pmaciag/przemo.gpg

 "Życie jest jak pudełko czekoladek... Nigdy nie wiesz na co trafisz."

------------------------------------------------------------------------

</excerpt>

Re: [gentoo-ppc-user] I can't bootstrap

[ArchAngel_Nix]

That looks like it did it. I switch to the correct compiler and things  
started to happen. Thanks for the help

On Sep 5, 2004, at 5:11 PM, Przemysław Maciąg wrote:

> W liście z nie, 05-09-2004, godz. 21:59, ArchAngel_Nix pisze:
>> Well I went into /etc/make.conf and added -3.3.3 to end of the
>> CHOSTline:  (I looked in the directory/etc/env.d/gcc/ for the version
>> Ihad)
>>
>> CHOST="powerpc-unknown-linux-gnu-3.3.3"
>>
>> Same result. Is there something more I need to do, or more info I
>> needto provide? Thanks again.
> In console try to do s/t like this:
> gcc-config powerpc-unknow-linux-gnu-3.3.3
>
> and after this - try to bootstrap normally. It helps me. Also - I  
> didn't
> have to make any change to CHOST variable in /etc/make.conf
>
> Plz reply _under_ the message.
>
> Regards,
> Przemek
> --  
> ----------------------------------------------------------------------- 
> -
> Email:pmaciag(at)inx.pm.waw.pl  |  Email:troll(at)trollmoors.dyndns.org
>     RLU#: 303556 | JID#: troll@chrome.pl | JID#: przemo@jabber.org
>             pgp: http://www.pm.waw.pl/~pmaciag/przemo.gpg
>  "Życie jest jak pudełko czekoladek... Nigdy nie wiesz na co trafisz."
> ----------------------------------------------------------------------- 
> -


--
gentoo-ppc-user@gentoo.org mailing list

Re: [gentoo-ppc-user] I can't bootstrap

[Przemysław Maciąg]

[-- Attachment #1: Type: text/plain, Size: 1062 bytes --]

W liście z nie, 05-09-2004, godz. 21:59, ArchAngel_Nix pisze: 
> Well I went into /etc/make.conf and added -3.3.3 to end of the
> CHOSTline:  (I looked in the directory/etc/env.d/gcc/ for the version
> Ihad)
> 
> CHOST="powerpc-unknown-linux-gnu-3.3.3"
> 
> Same result. Is there something more I need to do, or more info I
> needto provide? Thanks again.
In console try to do s/t like this:
gcc-config powerpc-unknow-linux-gnu-3.3.3

and after this - try to bootstrap normally. It helps me. Also - I didn't
have to make any change to CHOST variable in /etc/make.conf

Plz reply _under_ the message.

Regards,
Przemek
-- 
------------------------------------------------------------------------
Email:pmaciag(at)inx.pm.waw.pl  |  Email:troll(at)trollmoors.dyndns.org
    RLU#: 303556 | JID#: troll@chrome.pl | JID#: przemo@jabber.org
            pgp: http://www.pm.waw.pl/~pmaciag/przemo.gpg
 "Życie jest jak pudełko czekoladek... Nigdy nie wiesz na co trafisz."
------------------------------------------------------------------------

[-- Attachment #2: To jest część listu podpisana cyfrowo --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-ppc-user] I can't bootstrap

[Pieter Van den Abeele]

[-- Attachment #1: Type: text/plain, Size: 1383 bytes --]

This sound like a gcc-config issue. Did you do env-update after chroot?

if you did, could you test whether gcc-config has a gcc profile set?

if not:
gcc-config powerpc-unknown-linux-gnu-3.3.3

Pieter


On 05 Sep 2004, at 23:33, ArchAngel_Nix wrote:

> I am hoping someone can make some sense of this. I am installing 
> Gentoo 2004.2 (Universal Install LiveCD) on my PowerMac G4 (AGP). I 
> have been following the Gentoo Handbook. I have chosen stage 1 and 
> getting stuck on bootstraping. I downloaded all the soucres, but when 
> I run scripts/bootstrap.sh I get this dump below: (I ran 
> scripts/bootstrap.sh -f previous without error)
>
> >>> Source unpacked.
> Could not run/locate "gcc"
> ./create-localdecls
> Checking truncate argument type... off_t
> Checking libc version... Could not run/locate "gcc"
> ldd: ./libctest: No such file or directory
>
> rm: cannot remove `libctest': No such file or directory
>
> gcc   -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -Wall -c libsandbox.c
> Could not run/locate "gcc"
> make: *** [libsandbox.o] Error 1
>
> !!! ERROR: sys-apps/portage-2.0.50-r10 failed.
> !!! Function src_compile, Line 71, Exitcode 2
> !!! (no error message)
>
> What do I need to do to get his machine on it's feet? This is the 4 
> time I have tried to install Gentoo and has failed. (I have tried 
> stages 1, 2, & 3 with no success)
>
> Thanks for the help.

[-- Attachment #2: Type: text/enriched, Size: 1399 bytes --]

This sound like a gcc-config issue. Did you do env-update after chroot?


if you did, could you test whether gcc-config has a gcc profile set? 


if not:

gcc-config powerpc-unknown-linux-gnu-3.3.3


Pieter



On 05 Sep 2004, at 23:33, ArchAngel_Nix wrote:


<excerpt>I am hoping someone can make some sense of this. I am
installing Gentoo 2004.2 (Universal Install LiveCD) on my PowerMac G4
(AGP). I have been following the Gentoo Handbook. I have chosen stage
1 and getting stuck on bootstraping. I downloaded all the soucres, but
when I run <italic>scripts/bootstrap.sh</italic> I get this dump
below: (I ran <italic>scripts/bootstrap.sh -f</italic> previous
without error)


>>> Source unpacked.

Could not run/locate "gcc"

./create-localdecls

Checking truncate argument type... off_t

Checking libc version... Could not run/locate "gcc"

ldd: ./libctest: No such file or directory


rm: cannot remove `libctest': No such file or directory


gcc   -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -Wall -c libsandbox.c

Could not run/locate "gcc"

make: *** [libsandbox.o] Error 1


!!! ERROR: sys-apps/portage-2.0.50-r10 failed.

!!! Function src_compile, Line 71, Exitcode 2

!!! (no error message)


What do I need to do to get his machine on it's feet? This is the 4
time I have tried to install Gentoo and has failed. (I have tried
stages 1, 2, & 3 with no success)


Thanks for the help.</excerpt>