public inbox for gentoo-pms@lists.gentoo.org
 help / color / mirror / Atom feed
* [gentoo-pms] \t command
@ 2010-12-20 16:47 Christian Faulhammer
  0 siblings, 0 replies; only message in thread
From: Christian Faulhammer @ 2010-12-20 16:47 UTC (permalink / raw
  To: gentoo-pms


[-- Attachment #1.1: Type: text/plain, Size: 520 bytes --]

Hi,

attached you will find a patch which uses the capabilities of the url
package for the \code command.  Improvements:

* No masking of special characters anymore, this includes ~, ^ and _.
* Hyphenation possible to some degree.

This can be applied to the \t command in the main PMS document, makes
grepping the files a bit easier.  Wanted?

V-Li

-- 
Christian Faulhammer, Gentoo Lisp project
<URL:http://www.gentoo.org/proj/en/lisp/>, #gentoo-lisp on FreeNode

<URL:http://gentoo.faulhammer.org/>

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.2: 0001-EAPI-Cheat-Sheet-Use-the-line-breaking-functionality.patch --]
[-- Type: text/x-patch, Size: 8559 bytes --]

From 3c37eba1c7459567d84ce1bcd5f8cff713b13d0e Mon Sep 17 00:00:00 2001
From: Christian Faulhammer <fauli@gentoo.org>
Date: Mon, 20 Dec 2010 17:44:46 +0100
Subject: [PATCH] EAPI Cheat Sheet: Use the line breaking functionality of the url package

---
 eapi-cheatsheet.tex |   53 ++++++++++++++++++++++++++-------------------------
 1 files changed, 27 insertions(+), 26 deletions(-)

diff --git a/eapi-cheatsheet.tex b/eapi-cheatsheet.tex
index fcdd6d8..d2d3aac 100644
--- a/eapi-cheatsheet.tex
+++ b/eapi-cheatsheet.tex
@@ -13,10 +13,10 @@
 }
 \usepackage[orig,english]{isodate}
 \usepackage[scaled=.90]{helvet}
-\newcommand{\code}[1]{\texttt{#1}}
 \newcommand{\version}{0.3}
 \newcommand{\featureref}[1]{\textsc{#1} on page~\pageref{feat:#1}}
 \renewcommand{\familydefault}{\sfdefault}
+\DeclareUrlCommand\code{\urlstyle{tt}}
 \urlstyle{sf}
 \externaldocument{pms}
 
@@ -83,7 +83,8 @@ nonetheless.
     not disabled explicitly by user configuration) with a \code{+}
     sign in front.  See \featureref{iuse-defaults}.
     \item[Named slot dependencies] Dependencies can explicitly request
-    a specific slot by using the \code{dev-libs/foo:\emph{SLOT\_name}} syntax.  See
+    a specific slot by using the
+    \code{dev-libs/foo:}\emph{\texttt{SLOT\_name}} syntax.  See
     \featureref{slot-deps}.
 \end{description}
 \section{EAPI 2 (2008-09-25)}
@@ -91,13 +92,13 @@ nonetheless.
 \subsection{Additions/Changes}
 \label{sec:cs:eapi2-additions}
 \begin{description}
-    \item[\code{SRC\_URI} arrows] Allows redirection of upstream file
-    naming scheme.  By using \code{SRC\_URI="http://some/url -> foo"}
+    \item[\code{SRC_URI} arrows] Allows redirection of upstream file
+    naming scheme.  By using \code{SRC_URI="http://some/url -> foo"}
     the file is saved as \code{foo} in DISTDIR.  See
     \featureref{src-uri-arrows}.
     \item[USE dependencies] Dependencies can specify USE flag
     requirements on their target, removing the need for
-    \code{built\_with\_use} checks. A more powerful syntax that does
+    \code{built_with_use} checks. A more powerful syntax that does
     not require the flag to be in IUSE is in EAPI 4.
     \begin{description}
         \item[{[opt]}] The flag must be enabled.
@@ -118,20 +119,20 @@ nonetheless.
     be ignored by the package manager as long as the stated package is
     uninstalled later on.  Two exclamation marks are a strong blocker
     and will always be respected.  See \featureref{bang-strength}.
-    \item[\code{src\_configure, src\_prepare}] Both new phases provide
+    \item[\code{src_configure, src_prepare}] Both new phases provide
     finer granularity in the ebuild's structure.  Configure calls
-    should be moved from \code{src\_compile} to \code{src\_configure}.
+    should be moved from \code{src_compile} to \code{src_configure}.
     Patching and similar preparation must now be done in
-    \code{src\_prepare}, not \code{src\_unpack}.  See
+    \code{src_prepare}, not \code{src_unpack}.  See
     \featureref{src-prepare} and \featureref{src-configure}.
     \item[Default phase functions] The default functions for the
-    phases \code{pkg\_nofetch}, \code{src\_unpack},
-    \code{src\_prepare}, \code{src\_configure}, \code{src\_compile}
-    and \code{src\_test} can be called via
-    \code{default\_\emph{phasename}}, so duplicating the standard
+    phases \code{pkg_nofetch}, \code{src_unpack},
+    \code{src_prepare}, \code{src_configure}, \code{src_compile}
+    and \code{src_test} can be called via
+    \code{default_}\emph{\texttt{phasename}}, so duplicating the standard
     implementation is no longer necessary for small additions.  The
     short-hand \code{default} function calls the current phase's
-    \code{default\_} function automatically, so any small additions
+    \code{default_} function automatically, so any small additions
     you need will not be accompanied by a complete reimplementation of
     the phase.  See \featureref{default-phase-funcs} and
     \featureref{default-func}.
@@ -149,7 +150,7 @@ nonetheless.
 \begin{description}
     \item[Support for \code{.xz}] Unpack of \code{.xz} and
     \code{.tar.xz} files is possible without any custom
-    \code{src\_unpack} functions.  See \featureref{unpack-extensions}.
+    \code{src_unpack} functions.  See \featureref{unpack-extensions}.
     \item[Offset prefix] Supporting installation on Prefix-enabled
     systems\footnote{\url{http://prefix.gentoo.org/}} will be easier
     with this EAPI.
@@ -159,17 +160,17 @@ nonetheless.
 \subsection{Additions/Changes}
 \label{sec:cs:eapi4-additions}
 \begin{description}
-    \item[\code{pkg\_pretend}] Some useful checks (kernel options for
+    \item[\code{pkg_pretend}] Some useful checks (kernel options for
     example) can be placed in this new phase to inform the user early
     (when just pretending to emerge the package).  Most checks should
-    usually be repeated in \code{pkg\_setup}.  See
+    usually be repeated in \code{pkg_setup}.  See
     \featureref{pkg-pretend}.
-    \item[\code{src\_install}] The \code{src\_install} phase is no
+    \item[\code{src_install}] The \code{src_install} phase is no
     longer empty but has a default now.  This comes along with an
     accompanying \code{default} function.  See
     \featureref{src-install-4}.
-    \item[\code{pkg\_info} on non-installed packages] The
-    \code{pkg\_info} phase can be called even for non-installed
+    \item[\code{pkg_info} on non-installed packages] The
+    \code{pkg_info} phase can be called even for non-installed
     packages.  Be warned that dependencies might not have been
     installed at execution time.  See \featureref{pkg-info}.
     \item[\code{econf} changes] The helper function now always
@@ -181,10 +182,10 @@ nonetheless.
     specifies that flags not in IUSE should be treated as enabled; the
     latter, disabled. Cannot be used with USE\_EXPAND flags.  This
     mimics parts of the behaviour of \code{-{}-missing} in
-    \code{built\_with\_use}.  See \featureref{use-dep-defaults}.
+    \code{built_with_use}.  See \featureref{use-dep-defaults}.
     \item[Controllable compression] All items in the \code{doc},
     \code{info}, \code{man} subdirectories of \code{/usr/share/} may
-    be compressed on-disk after \code{src\_install}, except for
+    be compressed on-disk after \code{src_install}, except for
     \code{/usr/share/doc/\$\{PF\}/html}.  \code{docompress path \dots}
     adds paths to the inclusion list for compression.
     \code{docompress -x path \dots} adds paths to the exclusion list.
@@ -202,12 +203,12 @@ nonetheless.
     \featureref{nonfatal}.
     \item[\code{PROPERTIES}] Is mandatory for all package managers now
     to support interactive installs.
-    \item[\code{REPLACING\_VERSIONS} and \code{REPLACED\_BY\_VERSION}]
+    \item[\code{REPLACING_VERSIONS} and \code{REPLACED_BY_VERSION}]
     For corner cases in upgrade paths those variables can be defined
-    in \code{pkg\_*} functions to define a package version that is
+    in \code{pkg_*} functions to define a package version that is
     replaced by or is the replacement for the current one.  See
     \featureref{replace-version-vars}.
-    \item[MERGE\_TYPE] This variable contains one of three possible
+    \item[\code{MERGE_TYPE}] This variable contains one of three possible
     values to allow checks for the purpose of the current run:
     \begin{description}
         \item[\code{source}] Building and installing a package from
@@ -216,7 +217,7 @@ nonetheless.
         \item[\code{buildonly}] Building a binary package without installing it.
     \end{description}
     See \featureref{merge-type}.
-    \item[\code{REQUIRED\_USE}] This variable can be used similar to
+    \item[\code{REQUIRED_USE}] This variable can be used similar to
     the \code{(R|P)DEPEND} variables and define sets of USE flag
     combinations that are not allowed.  All elements can be further
     nested to achieve more functionality.
@@ -228,7 +229,7 @@ nonetheless.
         activated on \code{flag1} use "\code{flag1? || ( flag2 flag3
             \dots )}".
         \item[XOR] To allow exactly one USE flag out of many use
-        "\code{\textasciicircum\textasciicircum ( flag1 flag2 \dots )}".
+        "\code{^^ ( flag1 flag2 \dots )}".
     \end{description}
     See \featureref{required-use}.
 \end{description}
-- 
1.7.2.5


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2010-12-20 16:45 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-12-20 16:47 [gentoo-pms] \t command Christian Faulhammer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox