From: "J. Scott Kasten" <jscottkasten@yahoo.com>
To: gentoo-mips@lists.gentoo.org
Subject: Re: [gentoo-mips] Question - Kumba LiveCD RC6
Date: Tue, 30 Jan 2007 09:38:25 -0500 (EST) [thread overview]
Message-ID: <Pine.LNX.4.64.0701300843310.15883@bluefang.tetracon-eng.net> (raw)
In-Reply-To: <45B4C1D5.2040905@gentoo.org>
A belated thanks! Sorry for slow reply, but I've been installing. :)
I ended up using RC5 to bootstrap an IP32-R5K to partition the disk and
add the netboot image and arcload to the volume header. From there, I was
able to run the normal install. Thanks to the obvious hard work of lots
of gentoo people, it went smooth.
I have already emerged my way up to loadable kernel modules, IPv6,
XORG-X11, and am typing this mail on the system now. It seems to be rock
solid. After I've thorougly checked my kernel out over a couple weeks,
I'll post the config to Stuart's hardware compatibility page.
A few questions though.
[1] From looking at other configs there, and having just walked through
the 2.17.10 config process, it looks like the alsa mips ip32 sound device
has been disabled. I cannot even select it in 2.17.10. I was wondering
what the status of this driver was. Judging from submitted configs, it
looks like people had been enabling it at 2.16 or earlier.
[2] What is the root password for the RC6 CD? :)
I noticed in the RC6 comments that no-one had tested on the Indigo2, IP22
arch. I have a headless I2 (formerly extreeme) and will test boot it
sometime this comming weekend.
[3] Has anyone tried Firewire in the O2 PCI slot? I have an ADS
Technologies combo Firewire/USB 2.0 PCI card comming soon. This uses an
ALI chipset. I pulled the USB config from the RC6 CD kernel. I suspect
it won't be much to make the USB portion work. It will be interesting to
see about the firewire. Fortunately Firewire chipsets are more
standardized than USB. I'll report back when I know something here.
Thanks,
-S-
On Mon, 22 Jan 2007, Kumba wrote:
> Actually, I locked it on my dev site after putting it on the mirrors. Check
> your local mirror for it in experimental/mips/livecd/x-rc6/. I just checked
> OSU's copy, and it lets you fetch the image. Be sure to read the README :)
>
>
> --Kumba
>
--
gentoo-mips@gentoo.org mailing list
next prev parent reply other threads:[~2007-01-30 14:54 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-18 18:32 [gentoo-mips] Question - Kumba LiveCD RC6 J. Scott Kasten
2007-01-22 13:53 ` Kumba
2007-01-22 14:12 ` Mike Martin
2007-01-23 2:14 ` Kumba
2007-01-23 14:24 ` Mike Martin
2007-01-24 4:57 ` Kumba
2007-02-02 15:06 ` Mike Martin
2007-02-02 15:16 ` Stephen P. Becker
2007-02-02 15:52 ` Mike Martin
2007-02-07 17:54 ` Mike Martin
2007-02-09 6:47 ` Kumba
2007-02-09 13:24 ` Mike Martin
2007-01-30 14:38 ` J. Scott Kasten [this message]
2007-01-30 14:57 ` Andrew Gaffney
2007-02-09 6:54 ` Kumba
2007-02-09 13:22 ` [gentoo-mips] Firewire & USB 2.0 on O2 [Was LiveCD RC6] J. Scott Kasten
2007-02-09 14:24 ` [gentoo-mips] O2 Sound and Misc Stuff. " J. Scott Kasten
2007-02-09 17:21 ` Alex Deucher
2007-02-09 18:39 ` [gentoo-mips] JFS on non-intel [ Was O2 Sound and Misc Stuff] J. Scott Kasten
2007-02-09 19:05 ` Alex Deucher
2007-02-09 21:39 ` J. Scott Kasten
2007-02-09 22:30 ` Alex Deucher
2007-02-11 9:11 ` [gentoo-mips] O2 Sound and Misc Stuff. [Was LiveCD RC6] Kumba
2007-02-11 9:09 ` Kumba
2007-02-09 14:36 ` [gentoo-mips] Indigo2 IP22 " J. Scott Kasten
2007-02-11 9:15 ` Kumba
2007-02-11 13:58 ` J. Scott Kasten
2007-02-11 14:27 ` Stephen P. Becker
2007-02-11 15:36 ` J. Scott Kasten
2007-02-11 18:34 ` Kumba
2007-02-11 23:44 ` Johnathon Schade
2007-02-14 0:02 ` Kumba
2007-02-14 0:24 ` Jerry Jackson
2007-02-14 9:16 ` J. Scott Kasten
2007-02-14 14:16 ` Stephen P. Becker
2007-02-14 15:11 ` J. Scott Kasten
2007-02-14 17:20 ` Kumba
2007-02-14 17:53 ` J. Scott Kasten
2007-02-14 20:08 ` Kumba
2007-02-14 20:21 ` J. Scott Kasten
2007-02-15 4:48 ` Kumba
2007-02-15 15:40 ` J. Scott Kasten
2007-02-16 2:10 ` Kumba
2007-02-11 14:00 ` J. Scott Kasten
2007-02-11 18:36 ` Kumba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.0701300843310.15883@bluefang.tetracon-eng.net \
--to=jscottkasten@yahoo.com \
--cc=gentoo-mips@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox