* Re: [gentoo-mips] IP30: Gentoo installation without monitor & keyboard
@ 2008-03-02 16:33 99% ` Karin Willers
0 siblings, 0 replies; 1+ results
From: Karin Willers @ 2008-03-02 16:33 UTC (permalink / raw
To: gentoo-mips
Hello All,
bootp(): root=/dev/ram0 CONSOLE=/dev/ttyS0
did it - thanks for the speedy reply!
Cheers, Karin
-----
On Sun, 2008-03-02 at 18:11 +0200, Panagiotis Christopoulos wrote:
> On 16:47 Sun 02 Mar , Karin Willers wrote:
> > Hello All,
> >
> > I'm currently trying to install Gentoo MIPS on an IP30 without
> > monitor (and hence no keyboard connected). Connection to the
> > Octane is made serially from a laptop running minicom.
> >
> > I think, the machine (R12000 @ 400 MHz, 2 GByte RAM) boots the
> > ip30-r10k+-20050820.img image file correctly:
> >
> > >> bootp(): root=/dev/ram0
> > Setting $netaddr to 192.168.0.70 (from server )
> > Obtaining from server
> > 8520560+306368 entry: 0xa800000020799000
> >
> > but there is no further output; probably there is no getty
> > running on the serial port.
> >
> > Question 1: Is there an image that has serial console enabled?
> I'm not sure, but you can try this:
> bootp(): root=/dev/ram0 CONSOLE=/dev/ttyS0
> or
> bootp(): root=/dev/ram0 CONSOLE=/dev/ttyS1
>
> > Question 2: What is the format of the .img file that is loaded
> > via tftp - maybe there's a chance to add an entry for the
> > serial port (what is the proper special file here?) in the
> > initrd?
> >
> > Thanks, Karin
> >
> I hope this works,
>
> Panagiotis Christopoulos(pchrist)
--
gentoo-mips@lists.gentoo.org mailing list
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2008-03-02 15:47 [gentoo-mips] IP30: Gentoo installation without monitor & keyboard Karin Willers
2008-03-02 16:11 ` Panagiotis Christopoulos
2008-03-02 16:33 99% ` Karin Willers
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox