From: Arianna Arona <arianna@dsi.unimi.it>
To: gentoo-mips@lists.gentoo.org
Subject: Re: [gentoo-mips] Gentoo/MIPS SGI LiveCD RC5 release
Date: Fri, 28 Oct 2005 12:06:00 +0200 [thread overview]
Message-ID: <200510281206.00460.arianna@dsi.unimi.it> (raw)
In-Reply-To: <435719D8.6020407@gentoo.org>
On Thursday 20 October 2005 06:15, Kumba wrote:
> After lots of tinkering, testing and other odd n' ends, I released on
> Tuesday a new revision of the SGI LiveCD. Like its predecessor, RC4, this
> is a single CD that will boot and bring up several completely different SGI
> systems to a state where an install can be started.
[...]
> Most notably, the SGI Origin (IP27) series.
Hi,
what a wonderfull news!!
But I have always the same problem with IOC3 ethernet card.
The kernel included in this new live cd detect the mac address and all network
parameters (full duplex, 100Mb), but...... network doesn't work: Rx led
blinks but Tx doesn't. No bits are sent along the cable and after some hour I
have a RX buffer overflow.
May this output be usefull?
livecd root # lspci -x -vv -s 00:02.0
0000:00:02.0 Class ff00: Silicon Graphics, Inc. IOC3 I/O controller (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255
Interrupt: pin ? routed to IRQ 2
Region 0: Memory at 08600000 (32-bit, non-prefetchable) [size=1M]
00: a9 10 03 00 46 01 80 02 01 00 00 ff 00 ff 00 00
10: 00 00 60 08 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
livecd root # lspci -xxx -vv -s 00:02.0
0000:00:02.0 Class ff00: Silicon Graphics, Inc. IOC3 I/O controller (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255
Interrupt: pin ? routed to IRQ 2
Region 0: Memory at 08600000 (32-bit, non-prefetchable) [size=1M]
00: a9 10 03 00 46 01 80 02 01 00 00 ff 00 ff 00 00
10: 00 00 60 08 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 56 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Thank you for any help.
A.
--
Arianna Arona
Servizi Informatici
Dipartimento di Scienze dell'Informazione
Via Comelico 39
20135 Milano
--
gentoo-mips@gentoo.org mailing list
next prev parent reply other threads:[~2005-10-28 10:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-20 4:15 [gentoo-mips] Gentoo/MIPS SGI LiveCD RC5 release Kumba
2005-10-28 10:06 ` Arianna Arona [this message]
2005-10-29 22:16 ` Kumba
2005-11-02 11:20 ` Arianna Arona
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200510281206.00460.arianna@dsi.unimi.it \
--to=arianna@dsi.unimi.it \
--cc=gentoo-mips@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox