* [gentoo-laptop] xircom cardbus card cannot receive data
@ 2005-12-08 10:53 Akhil Srinivasan
2005-12-08 16:29 ` Mauro Maroni
0 siblings, 1 reply; 3+ messages in thread
From: Akhil Srinivasan @ 2005-12-08 10:53 UTC (permalink / raw
To: gentoo-laptop
[-- Attachment #1: Type: text/plain, Size: 57951 bytes --]
Hi
I have installed Gentoo 2005.1 i686 on my Thinkpad 600x and after wrestling
with the kernel, its come to the point where my network card does not
receive any data. The cat /proc/net/dev output shows bytes transmitted but
nothing received. The cables and connection have been checked out with other
computers.
Outputs for various utilities and my kernel configuration have been given
below. I hope somebody can puzzle out the problem.
Sorry if its too verbose, but don't want to take the chance on missing any
data that might help.
Akhil Srinivasan
Dmesg
Linux version 2.6.12-gentoo-r6 (root@akhilss) (gcc version
3.3.5-20050130(Gentoo
3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 SMP Thu Dec 8
12:13:03 IST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bfd0000 (usable)
BIOS-e820: 000000000bfd0000 - 000000000bfdf000 (ACPI data)
BIOS-e820: 000000000bfdf000 - 000000000bfe0000 (ACPI NVS)
BIOS-e820: 000000000bfe0000 - 000000000c000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
On node 0 totalpages: 49104
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 45008 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 IBM ) @ 0x000fd6e0
ACPI: RSDT (v001 IBM TP600X 0x00000001 0x00000000) @ 0x0bfd0000
ACPI: FADT (v001 IBM TP600X 0x00000001 0x00000000) @ 0x0bfd0100
ACPI: BOOT (v001 IBM TP600X 0x00000001 0x00000000) @ 0x0bfd0040
ACPI: DSDT (v001 IBM TP600X 0x00000106 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xef08
Allocating PCI resources starting at 0c000000 (gap: 0c000000:f3fe0000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192
real_root=/dev/hda3 udev
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011c1000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0494000 soft=c048c000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 498.316 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 189060k/196416k available (2444k kernel code, 6836k reserved, 955k
data, 208k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 985.08 BogoMIPS (lpj=492544)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0800)
CPU0: Intel Pentium III (Coppermine) stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
checking if image is initramfs... it is
Freeing initrd memory: 881k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Scanning bus 0000:00
PCI: Found 0000:00:00.0 [8086/7190] 000600 00
PCI: Calling quirk c0284ac0 for 0000:00:00.0
PCI: Calling quirk c0284f50 for 0000:00:00.0
PCI: Calling quirk c0307fb0 for 0000:00:00.0
PCI: Calling quirk c0308160 for 0000:00:00.0
PCI: Calling quirk c03082f0 for 0000:00:00.0
PCI: Found 0000:00:01.0 [8086/7191] 000604 01
PCI: Calling quirk c0284ac0 for 0000:00:01.0
PCI: Calling quirk c0284f50 for 0000:00:01.0
PCI: Calling quirk c0307fb0 for 0000:00:01.0
PCI: Calling quirk c0308160 for 0000:00:01.0
PCI: Calling quirk c03082f0 for 0000:00:01.0
PCI: Found 0000:00:02.0 [104c/ac1b] 000607 02
PCI: Calling quirk c0284ac0 for 0000:00:02.0
PCI: Calling quirk c0284f50 for 0000:00:02.0
PCI: Calling quirk c0307fb0 for 0000:00:02.0
PCI: Calling quirk c03082f0 for 0000:00:02.0
PCI: Found 0000:00:02.1 [104c/ac1b] 000607 02
PCI: Calling quirk c0284ac0 for 0000:00:02.1
PCI: Calling quirk c0284f50 for 0000:00:02.1
PCI: Calling quirk c0307fb0 for 0000:00:02.1
PCI: Calling quirk c03082f0 for 0000:00:02.1
PCI: Found 0000:00:03.0 [11c1/0449] 000780 00
PCI: Calling quirk c0284ac0 for 0000:00:03.0
PCI: Calling quirk c0284f50 for 0000:00:03.0
PCI: Calling quirk c0307fb0 for 0000:00:03.0
PCI: Calling quirk c03082f0 for 0000:00:03.0
PCI: Found 0000:00:06.0 [1013/6003] 000401 00
PCI: Calling quirk c0284ac0 for 0000:00:06.0
PCI: Calling quirk c0284f50 for 0000:00:06.0
PCI: Calling quirk c0307fb0 for 0000:00:06.0
PCI: Calling quirk c03082f0 for 0000:00:06.0
PCI: Found 0000:00:07.0 [8086/7110] 000680 00
PCI: Calling quirk c0284ac0 for 0000:00:07.0
PCI: Calling quirk c0284f50 for 0000:00:07.0
PCI: Calling quirk c0307fb0 for 0000:00:07.0
PCI: Calling quirk c0308160 for 0000:00:07.0
PCI: Calling quirk c03082f0 for 0000:00:07.0
PCI: Found 0000:00:07.1 [8086/7111] 000101 00
PCI: Calling quirk c0284ac0 for 0000:00:07.1
PCI: Calling quirk c0284f50 for 0000:00:07.1
PCI: Calling quirk c0307fb0 for 0000:00:07.1
PCI: Calling quirk c0308160 for 0000:00:07.1
PCI: Calling quirk c03082f0 for 0000:00:07.1
PCI: Found 0000:00:07.2 [8086/7112] 000c03 00
PCI: Calling quirk c0284940 for 0000:00:07.2
PCI: Calling quirk c0284ac0 for 0000:00:07.2
PCI: Calling quirk c0284f50 for 0000:00:07.2
PCI: Calling quirk c0307fb0 for 0000:00:07.2
PCI: Calling quirk c0308160 for 0000:00:07.2
PCI: Calling quirk c03082f0 for 0000:00:07.2
PCI: Found 0000:00:07.3 [8086/7113] 000680 00
PCI: Calling quirk c0284640 for 0000:00:07.3
PCI: Calling quirk c0284ac0 for 0000:00:07.3
PCI: Calling quirk c0284f50 for 0000:00:07.3
PCI: Calling quirk c0307fb0 for 0000:00:07.3
PCI: Calling quirk c0308060 for 0000:00:07.3
PCI: Calling quirk c0308160 for 0000:00:07.3
PCI: Calling quirk c03082f0 for 0000:00:07.3
PCI: Fixups for bus 0000:00
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
PCI: Scanning bus 0000:01
PCI: Found 0000:01:00.0 [10c8/0006] 000300 00
PCI: Calling quirk c0284ac0 for 0000:01:00.0
PCI: Calling quirk c0284f50 for 0000:01:00.0
PCI: Calling quirk c0307fb0 for 0000:01:00.0
PCI: Calling quirk c03082f0 for 0000:01:00.0
Boot video device is 0000:01:00.0
PCI: Fixups for bus 0000:01
PCI: Bus scan for 0000:01 returning with max=01
PCI: Scanning behind PCI bridge 0000:00:02.0, config 040200, pass 0
PCI: Scanning behind PCI bridge 0000:00:02.1, config 070500, pass 0
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 1
PCI: Scanning behind PCI bridge 0000:00:02.0, config 040200, pass 1
PCI: Scanning behind PCI bridge 0000:00:02.1, config 070500, pass 1
PCI: Bus scan for 0000:00 returning with max=09
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
ACPI: Power Resource [PSIO] (on)
ACPI: Embedded Controller [EC0] (gpe 9)
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PVID] (on)
ACPI: Power Resource [PRSD] (off)
ACPI: Power Resource [PDCK] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:07: ioport range 0x15e0-0x15ef has been reserved
pnp: 00:07: ioport range 0xef00-0xef3f could not be reserved
pnp: 00:07: ioport range 0xefa0-0xefaf has been reserved
Simple Boot Flag at 0x33 set to 0x1
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no
debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
PCI: Calling quirk c02844b0 for 0000:00:00.0
Limiting direct PCI/PCI transfers.
PCI: Calling quirk c02849d0 for 0000:00:00.0
PCI: Calling quirk c02844b0 for 0000:00:01.0
PCI: Calling quirk c02849d0 for 0000:00:01.0
PCI: Calling quirk c02849d0 for 0000:00:02.0
PCI: Calling quirk c02849d0 for 0000:00:02.1
PCI: Calling quirk c02849d0 for 0000:00:03.0
PCI: Calling quirk c02849d0 for 0000:00:06.0
PCI: Calling quirk c02849d0 for 0000:00:07.0
PCI: Calling quirk c02849d0 for 0000:00:07.1
PCI: Calling quirk c02849d0 for 0000:00:07.2
PCI: Calling quirk c02849d0 for 0000:00:07.3
PCI: Calling quirk c02849d0 for 0000:01:00.0
DoubleTalk PC - not found
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
pnp: Device 00:02 activated.
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: IBM-DARA-212000, ATA DISK drive
logips2pp: Detected unknown logitech mouse model 85
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-C2302, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 23572080 sectors (12068 MB) w/418KiB Cache, CHS=24944/15/63
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 208k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] disabled and referenced, BIOS bug.
ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00004000
uhci_hcd 0000:00:07.2: detected 2 ports
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Intel Corporation 82371AB/EB/MB PIIX4 USB
usb usb1: Manufacturer: Linux 2.6.12-gentoo-r6 uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0000
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
uhci_hcd 0000:00:07.2: suspend_hc
spurious 8259A interrupt: IRQ7.
Adding 500368k swap on /dev/hda2. Priority:-1 extents:1
kernel config
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-gentoo-r6
# Thu Dec 8 11:46:57 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_HPET_TIMER=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE is not set
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_PCI_DEBUG=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=m
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_IDE_CHIPSETS=y
#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_NETFILTER is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
CONFIG_ATM=m
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set
# CONFIG_ATM_BR2684 is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_SYNCLINK_SYNCPPP=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_VORTEX=m
CONFIG_GAMEPORT_FM801=m
CONFIG_GAMEPORT_CS461X=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
CONFIG_DTLK=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=y
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_MWAVE=m
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_FB_VESA_STD=y
# CONFIG_FB_VESA_TNG is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
CONFIG_FB_NEOMAGIC=m
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
# CONFIG_FB_SPLASH is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
CONFIG_SPEAKUP_DEFAULT="none"
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_OPL3_LIB=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS4281=m
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y
CONFIG_USB_KC2190=y
#
# Intelligent USB Devices/Gadgets
#
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_ZAURUS is not set
CONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#
CONFIG_USB_AX8817X=y
CONFIG_USB_ZD1201=m
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OMNINET=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
# CONFIG_USB_ATM is not set
# CONFIG_USB_SPEEDTOUCH is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y
lsmod
Module Size Used by
pcmcia 29972 4
rtc 10260 0
pcspkr 4684 0
parport_pc 36036 0
parport 26560 1 parport_pc
floppy 60052 1
neofb 19740 1
vgastate 11520 1 neofb
piix 11524 0 [permanent]
xircom_cb 12672 0
cs461x 5128 0
gameport 17800 2 cs461x
yenta_socket 23048 3
rsrc_nonstatic 13696 1 yenta_socket
pcmcia_core 53892 3 pcmcia,yenta_socket,rsrc_nonstatic
uhci_hcd 33548 0
usb_storage 109328 0
scsi_mod 97352 1 usb_storage
ehci_hcd 45320 0
usbcore 128220 4 uhci_hcd,usb_storage,ehci_hcd
pspci output
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
Flags: bus master, medium devsel, latency 64
Memory at 40000000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 1.0
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 168
Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: 70000000-dfffffff
Prefetchable memory behind bridge: e0000000-f7ffffff
Expansion ROM at 0000d000 [disabled] [size=4K]
0000:00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at 50103000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 0c000000-0c3ff000 (prefetchable)
Memory window 1: 0c400000-0c7ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
0000:00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 50102000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 0c800000-0cbff000 (prefetchable)
Memory window 1: 0cc00000-0cfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001
0000:00:03.0 Communication controller: Agere Systems (former Lucent
Microelectronics) WinModem 56k (rev 01)
Subsystem: IBM: Unknown device 018c
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at 50101000 (32-bit, non-prefetchable)
I/O ports at 4500 [size=8]
I/O ports at 4400 [size=256]
Capabilities: [f8] Power Management version 2
0000:00:06.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM: Unknown device 0153
Flags: bus master, slow devsel, latency 64, IRQ 10
Memory at 50100000 (32-bit, non-prefetchable)
Memory at 50000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Flags: bus master, medium devsel, latency 48
I/O ports at fcf0 [size=16]
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 48, IRQ 11
I/O ports at 4000 [size=32]
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
Flags: medium devsel, IRQ 9
0000:01:00.0 VGA compatible controller: Neomagic Corporation NM2360
[MagicMedia 256ZX] (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 0000
Flags: bus master, medium devsel, latency 128, IRQ 10
Memory at e0000000 (32-bit, prefetchable)
Memory at 70000000 (32-bit, non-prefetchable) [size=4M]
Memory at 70400000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 1
0000:06:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
Subsystem: Xircom Cardbus Ethernet 10/100
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at 5000 [size=200M]
Memory at 0cc00000 (32-bit, non-prefetchable) [size=2K]
Memory at 0cc00800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at 00004000 [disabled]
Capabilities: [dc] Power Management version 1
[-- Attachment #2: Type: text/html, Size: 219126 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [gentoo-laptop] xircom cardbus card cannot receive data
2005-12-08 10:53 [gentoo-laptop] xircom cardbus card cannot receive data Akhil Srinivasan
@ 2005-12-08 16:29 ` Mauro Maroni
2005-12-17 14:22 ` [gentoo-laptop] " Akhil Srinivasan
0 siblings, 1 reply; 3+ messages in thread
From: Mauro Maroni @ 2005-12-08 16:29 UTC (permalink / raw
To: gentoo-laptop
I do not know what /proc/net/dev really shows...but just in case:
Do you have correct IP settings? If you, for example, have a wrong IP address,
you are not going to receive any packet (at least at layer 3)
I have a TP600E with both wireless and wired cardbus cards and never had a
problem
Regards,
Mauro
On Thursday 08 December 2005 07:53, Akhil Srinivasan wrote:
> Hi
> I have installed Gentoo 2005.1 i686 on my Thinkpad 600x and after wrestling
> with the kernel, its come to the point where my network card does not
> receive any data. The cat /proc/net/dev output shows bytes transmitted but
> nothing received. The cables and connection have been checked out with
> other computers.
>
> Outputs for various utilities and my kernel configuration have been given
> below. I hope somebody can puzzle out the problem.
> Sorry if its too verbose, but don't want to take the chance on missing any
> data that might help.
>
> Akhil Srinivasan
>
> Dmesg
> Linux version 2.6.12-gentoo-r6 (root@akhilss) (gcc version
> 3.3.5-20050130(Gentoo
> 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 SMP Thu Dec 8
> 12:13:03 IST 2005
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000bfd0000 (usable)
> BIOS-e820: 000000000bfd0000 - 000000000bfdf000 (ACPI data)
> BIOS-e820: 000000000bfdf000 - 000000000bfe0000 (ACPI NVS)
> BIOS-e820: 000000000bfe0000 - 000000000c000000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 191MB LOWMEM available.
> On node 0 totalpages: 49104
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 45008 pages, LIFO batch:15
> HighMem zone: 0 pages, LIFO batch:1
> DMI 2.2 present.
> ACPI: RSDP (v000 IBM ) @ 0x000fd6e0
> ACPI: RSDT (v001 IBM TP600X 0x00000001 0x00000000) @ 0x0bfd0000
> ACPI: FADT (v001 IBM TP600X 0x00000001 0x00000000) @ 0x0bfd0100
> ACPI: BOOT (v001 IBM TP600X 0x00000001 0x00000000) @ 0x0bfd0040
> ACPI: DSDT (v001 IBM TP600X 0x00000106 MSFT 0x0100000c) @ 0x00000000
> ACPI: PM-Timer IO Port: 0xef08
> Allocating PCI resources starting at 0c000000 (gap: 0c000000:f3fe0000)
> Built 1 zonelists
> Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192
> real_root=/dev/hda3 udev
> Local APIC disabled by BIOS -- you can enable it with "lapic"
> mapped APIC to ffffd000 (011c1000)
> Initializing CPU#0
> CPU 0 irqstacks, hard=c0494000 soft=c048c000
> PID hash table entries: 1024 (order: 10, 16384 bytes)
> Detected 498.316 MHz processor.
> Using pmtmr for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 189060k/196416k available (2444k kernel code, 6836k reserved, 955k
> data, 208k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode...
> Ok.
>
> Calibrating delay loop... 985.08 BogoMIPS (lpj=492544)
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
> 00000000 00000000 00000000
> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
> 00000000 00000000 00000000
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
> 00000000 00000000
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> ACPI: setting ELCR to 0200 (from 0800)
> CPU0: Intel Pentium III (Coppermine) stepping 01
> SMP motherboard not detected.
> Local APIC not detected. Using dummy APIC emulation.
> Brought up 1 CPUs
> CPU0 attaching sched-domain:
> domain 0: span 01
> groups: 01
> domain 1: span 01
> groups: 01
> checking if image is initramfs... it is
> Freeing initrd memory: 881k freed
> NET: Registered protocol family 16
> EISA bus registered
> PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20050309
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Scanning bus 0000:00
> PCI: Found 0000:00:00.0 [8086/7190] 000600 00
> PCI: Calling quirk c0284ac0 for 0000:00:00.0
> PCI: Calling quirk c0284f50 for 0000:00:00.0
> PCI: Calling quirk c0307fb0 for 0000:00:00.0
> PCI: Calling quirk c0308160 for 0000:00:00.0
> PCI: Calling quirk c03082f0 for 0000:00:00.0
> PCI: Found 0000:00:01.0 [8086/7191] 000604 01
> PCI: Calling quirk c0284ac0 for 0000:00:01.0
> PCI: Calling quirk c0284f50 for 0000:00:01.0
> PCI: Calling quirk c0307fb0 for 0000:00:01.0
> PCI: Calling quirk c0308160 for 0000:00:01.0
> PCI: Calling quirk c03082f0 for 0000:00:01.0
> PCI: Found 0000:00:02.0 [104c/ac1b] 000607 02
> PCI: Calling quirk c0284ac0 for 0000:00:02.0
> PCI: Calling quirk c0284f50 for 0000:00:02.0
> PCI: Calling quirk c0307fb0 for 0000:00:02.0
> PCI: Calling quirk c03082f0 for 0000:00:02.0
> PCI: Found 0000:00:02.1 [104c/ac1b] 000607 02
> PCI: Calling quirk c0284ac0 for 0000:00:02.1
> PCI: Calling quirk c0284f50 for 0000:00:02.1
> PCI: Calling quirk c0307fb0 for 0000:00:02.1
> PCI: Calling quirk c03082f0 for 0000:00:02.1
> PCI: Found 0000:00:03.0 [11c1/0449] 000780 00
> PCI: Calling quirk c0284ac0 for 0000:00:03.0
> PCI: Calling quirk c0284f50 for 0000:00:03.0
> PCI: Calling quirk c0307fb0 for 0000:00:03.0
> PCI: Calling quirk c03082f0 for 0000:00:03.0
> PCI: Found 0000:00:06.0 [1013/6003] 000401 00
> PCI: Calling quirk c0284ac0 for 0000:00:06.0
> PCI: Calling quirk c0284f50 for 0000:00:06.0
> PCI: Calling quirk c0307fb0 for 0000:00:06.0
> PCI: Calling quirk c03082f0 for 0000:00:06.0
> PCI: Found 0000:00:07.0 [8086/7110] 000680 00
> PCI: Calling quirk c0284ac0 for 0000:00:07.0
> PCI: Calling quirk c0284f50 for 0000:00:07.0
> PCI: Calling quirk c0307fb0 for 0000:00:07.0
> PCI: Calling quirk c0308160 for 0000:00:07.0
> PCI: Calling quirk c03082f0 for 0000:00:07.0
> PCI: Found 0000:00:07.1 [8086/7111] 000101 00
> PCI: Calling quirk c0284ac0 for 0000:00:07.1
> PCI: Calling quirk c0284f50 for 0000:00:07.1
> PCI: Calling quirk c0307fb0 for 0000:00:07.1
> PCI: Calling quirk c0308160 for 0000:00:07.1
> PCI: Calling quirk c03082f0 for 0000:00:07.1
> PCI: Found 0000:00:07.2 [8086/7112] 000c03 00
> PCI: Calling quirk c0284940 for 0000:00:07.2
> PCI: Calling quirk c0284ac0 for 0000:00:07.2
> PCI: Calling quirk c0284f50 for 0000:00:07.2
> PCI: Calling quirk c0307fb0 for 0000:00:07.2
> PCI: Calling quirk c0308160 for 0000:00:07.2
> PCI: Calling quirk c03082f0 for 0000:00:07.2
> PCI: Found 0000:00:07.3 [8086/7113] 000680 00
> PCI: Calling quirk c0284640 for 0000:00:07.3
> PCI: Calling quirk c0284ac0 for 0000:00:07.3
> PCI: Calling quirk c0284f50 for 0000:00:07.3
> PCI: Calling quirk c0307fb0 for 0000:00:07.3
> PCI: Calling quirk c0308060 for 0000:00:07.3
> PCI: Calling quirk c0308160 for 0000:00:07.3
> PCI: Calling quirk c03082f0 for 0000:00:07.3
> PCI: Fixups for bus 0000:00
> PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
> PCI: Scanning bus 0000:01
> PCI: Found 0000:01:00.0 [10c8/0006] 000300 00
> PCI: Calling quirk c0284ac0 for 0000:01:00.0
> PCI: Calling quirk c0284f50 for 0000:01:00.0
> PCI: Calling quirk c0307fb0 for 0000:01:00.0
> PCI: Calling quirk c03082f0 for 0000:01:00.0
> Boot video device is 0000:01:00.0
> PCI: Fixups for bus 0000:01
> PCI: Bus scan for 0000:01 returning with max=01
> PCI: Scanning behind PCI bridge 0000:00:02.0, config 040200, pass 0
> PCI: Scanning behind PCI bridge 0000:00:02.1, config 070500, pass 0
> PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 1
> PCI: Scanning behind PCI bridge 0000:00:02.0, config 040200, pass 1
> PCI: Scanning behind PCI bridge 0000:00:02.1, config 070500, pass 1
> PCI: Bus scan for 0000:00 returning with max=09
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
> ACPI: Power Resource [PSIO] (on)
> ACPI: Embedded Controller [EC0] (gpe 9)
> ACPI: Power Resource [PFN0] (off)
> ACPI: Power Resource [PVID] (on)
> ACPI: Power Resource [PRSD] (off)
> ACPI: Power Resource [PDCK] (on)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 12 devices
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> pnp: 00:07: ioport range 0x15e0-0x15ef has been reserved
> pnp: 00:07: ioport range 0xef00-0xef3f could not be reserved
> pnp: 00:07: ioport range 0xefa0-0xefaf has been reserved
> Simple Boot Flag at 0x33 set to 0x1
> inotify device minor=63
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SGI XFS with ACLs, security attributes, realtime, large block numbers, no
> debug enabled
> SGI XFS Quota Management subsystem
> Initializing Cryptographic API
> PCI: Calling quirk c02844b0 for 0000:00:00.0
> Limiting direct PCI/PCI transfers.
> PCI: Calling quirk c02849d0 for 0000:00:00.0
> PCI: Calling quirk c02844b0 for 0000:00:01.0
> PCI: Calling quirk c02849d0 for 0000:00:01.0
> PCI: Calling quirk c02849d0 for 0000:00:02.0
> PCI: Calling quirk c02849d0 for 0000:00:02.1
> PCI: Calling quirk c02849d0 for 0000:00:03.0
> PCI: Calling quirk c02849d0 for 0000:00:06.0
> PCI: Calling quirk c02849d0 for 0000:00:07.0
> PCI: Calling quirk c02849d0 for 0000:00:07.1
> PCI: Calling quirk c02849d0 for 0000:00:07.2
> PCI: Calling quirk c02849d0 for 0000:00:07.3
> PCI: Calling quirk c02849d0 for 0000:01:00.0
>
> DoubleTalk PC - not found
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
> pnp: Device 00:02 activated.
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> mice: PS/2 mouse device common for all mice
> io scheduler noop registered
> io scheduler deadline registered
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> input: AT Translated Set 2 keyboard on isa0060/serio0
> hda: IBM-DARA-212000, ATA DISK drive
> logips2pp: Detected unknown logitech mouse model 85
> input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
> Probing IDE interface ide1...
> hdc: TOSHIBA DVD-ROM SD-C2302, ATAPI CD/DVD-ROM drive
> Probing IDE interface ide2...
> Probing IDE interface ide3...
> Probing IDE interface ide4...
> Probing IDE interface ide5...
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 23572080 sectors (12068 MB) w/418KiB Cache, CHS=24944/15/63
> hda: cache flushes not supported
> hda: hda1 hda2 hda3
> hdc: ATAPI 24X DVD-ROM drive, 128kB Cache
> Uniform CD-ROM driver Revision: 3.20
> EISA: Probing bus 0 at eisa.0
> Cannot allocate resource for EISA slot 4
> EISA: Detected 0 cards.
> NET: Registered protocol family 2
> IP: routing cache hash table of 512 buckets, 8Kbytes
> TCP established hash table entries: 8192 (order: 5, 131072 bytes)
> TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
> TCP: Hash tables configured (established 8192 bind 8192)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Freeing unused kernel memory: 208k freed
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
> SCSI subsystem initialized
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI Interrupt Link [LNKD] disabled and referenced, BIOS bug.
> ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low)
> -> IRQ 11
> uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:07.2: irq 11, io base 0x00004000
> uhci_hcd 0000:00:07.2: detected 2 ports
> usb usb1: default language 0x0409
> usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: Intel Corporation 82371AB/EB/MB PIIX4 USB
> usb usb1: Manufacturer: Linux 2.6.12-gentoo-r6 uhci_hcd
> usb usb1: SerialNumber: 0000:00:07.2
> usb usb1: hotplug
> usb usb1: adding 1-0:1.0 (config #1, interface 0)
> usb 1-0:1.0: hotplug
> hub 1-0:1.0: usb_probe_interface
> hub 1-0:1.0: usb_probe_interface - got id
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> hub 1-0:1.0: standalone hub
> hub 1-0:1.0: no power switching (usb 1.0)
> hub 1-0:1.0: individual port over-current protection
> hub 1-0:1.0: power on to power good time: 2ms
> hub 1-0:1.0: local power source is good
> hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0000
> ReiserFS: hda3: found reiserfs format "3.6" with standard journal
> ReiserFS: hda3: using ordered data mode
> ReiserFS: hda3: journal params: device hda3, size 8192, journal first block
> 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> ReiserFS: hda3: checking transaction log (hda3)
> ReiserFS: hda3: Using r5 hash to sort names
> uhci_hcd 0000:00:07.2: suspend_hc
> spurious 8259A interrupt: IRQ7.
> Adding 500368k swap on /dev/hda2. Priority:-1 extents:1
>
> kernel config
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.12-gentoo-r6
> # Thu Dec 8 11:46:57 2005
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
>
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> CONFIG_HOTPLUG=y
> CONFIG_KOBJECT_UEVENT=y
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_CPUSETS is not set
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_ALL is not set
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_CC_ALIGN_FUNCTIONS=0
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> CONFIG_OBSOLETE_MODPARM=y
> CONFIG_MODVERSIONS=y
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_KMOD=y
> CONFIG_STOP_MACHINE=y
>
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_ES7000 is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> CONFIG_M586=y
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> CONFIG_X86_GENERIC=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_X86_PPRO_FENCE=y
> CONFIG_X86_F00F_BUG=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_ALIGNMENT_16=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_HPET_TIMER=y
> CONFIG_SMP=y
> CONFIG_NR_CPUS=8
> CONFIG_SCHED_SMT=y
> CONFIG_PREEMPT=y
> CONFIG_PREEMPT_BKL=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> # CONFIG_X86_MCE is not set
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_X86_REBOOTFIXUPS is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
>
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> # CONFIG_NOHIGHMEM is not set
> CONFIG_HIGHMEM4G=y
> # CONFIG_HIGHMEM64G is not set
> CONFIG_HIGHMEM=y
> # CONFIG_HIGHPTE is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> # CONFIG_EFI is not set
> CONFIG_IRQBALANCE=y
> CONFIG_HAVE_DEC_LOCK=y
> # CONFIG_REGPARM is not set
> CONFIG_SECCOMP=y
>
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> # CONFIG_SOFTWARE_SUSPEND is not set
>
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_INTERPRETER=y
> # CONFIG_ACPI_SLEEP is not set
> CONFIG_ACPI_AC=m
> CONFIG_ACPI_BATTERY=m
> CONFIG_ACPI_BUTTON=m
> CONFIG_ACPI_VIDEO=m
> CONFIG_ACPI_FAN=m
> CONFIG_ACPI_PROCESSOR=m
> CONFIG_ACPI_THERMAL=m
> CONFIG_ACPI_ASUS=m
> CONFIG_ACPI_IBM=m
> CONFIG_ACPI_TOSHIBA=m
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=m
>
> #
> # APM (Advanced Power Management) BIOS Support
> #
> CONFIG_APM=m
> # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> CONFIG_APM_DO_ENABLE=y
> # CONFIG_APM_CPU_IDLE is not set
> # CONFIG_APM_DISPLAY_BLANK is not set
> # CONFIG_APM_RTC_IS_GMT is not set
> # CONFIG_APM_ALLOW_INTS is not set
> CONFIG_APM_REAL_MODE_POWER_OFF=y
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=m
> # CONFIG_CPU_FREQ_DEBUG is not set
> CONFIG_CPU_FREQ_STAT=m
> # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=m
> CONFIG_CPU_FREQ_GOV_ONDEMAND=m
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
>
> #
> # CPUFreq processor drivers
> #
> CONFIG_X86_ACPI_CPUFREQ=m
> CONFIG_X86_POWERNOW_K6=m
> CONFIG_X86_POWERNOW_K7=m
> CONFIG_X86_POWERNOW_K7_ACPI=y
> CONFIG_X86_POWERNOW_K8=m
> CONFIG_X86_POWERNOW_K8_ACPI=y
> CONFIG_X86_GX_SUSPMOD=m
> CONFIG_X86_SPEEDSTEP_CENTRINO=m
> CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
> # CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE is not set
> CONFIG_X86_SPEEDSTEP_ICH=m
> CONFIG_X86_SPEEDSTEP_SMI=m
> CONFIG_X86_P4_CLOCKMOD=m
> CONFIG_X86_CPUFREQ_NFORCE2=m
> CONFIG_X86_LONGRUN=m
> CONFIG_X86_LONGHAUL=m
>
> #
> # shared options
> #
> # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
> CONFIG_X86_SPEEDSTEP_LIB=m
> # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
>
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GOMMCONFIG is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> # CONFIG_PCIEPORTBUS is not set
> # CONFIG_PCI_MSI is not set
> # CONFIG_PCI_LEGACY_PROC is not set
> CONFIG_PCI_NAMES=y
> CONFIG_PCI_DEBUG=y
> CONFIG_ISA_DMA_API=y
> CONFIG_ISA=y
> CONFIG_EISA=y
> CONFIG_EISA_VLB_PRIMING=y
> CONFIG_EISA_PCI_EISA=y
> CONFIG_EISA_VIRTUAL_ROOT=y
> # CONFIG_EISA_NAMES is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> CONFIG_PCCARD=m
> CONFIG_PCMCIA_DEBUG=y
> CONFIG_PCMCIA=m
> CONFIG_CARDBUS=y
>
> #
> # PC-card bridges
> #
> CONFIG_YENTA=m
> # CONFIG_PD6729 is not set
> # CONFIG_I82092 is not set
> # CONFIG_I82365 is not set
> # CONFIG_TCIC is not set
> CONFIG_PCMCIA_PROBE=y
> CONFIG_PCCARD_NONSTATIC=m
>
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
>
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_AOUT is not set
> # CONFIG_BINFMT_MISC is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=m
> # CONFIG_DEBUG_DRIVER is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_SERIAL=m
> CONFIG_PARPORT_PC_FIFO=y
> CONFIG_PARPORT_PC_SUPERIO=y
> CONFIG_PARPORT_PC_PCMCIA=m
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_1284 is not set
>
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
>
> #
> # Protocols
> #
> CONFIG_ISAPNP=y
> # CONFIG_PNPBIOS is not set
> CONFIG_PNPACPI=y
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=m
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=m
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> CONFIG_BLK_DEV_NBD=m
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=8192
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_LBD=y
> # CONFIG_CDROM_PKTCDVD is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=m
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=m
> # CONFIG_ATA_OVER_ETH is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_BLK_DEV_IDECS is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> CONFIG_BLK_DEV_IDEFLOPPY=m
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> CONFIG_BLK_DEV_CMD640=y
> CONFIG_BLK_DEV_CMD640_ENHANCED=y
> CONFIG_BLK_DEV_IDEPNP=y
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_BLK_DEV_AEC62XX=m
> # CONFIG_BLK_DEV_ALI15X3 is not set
> CONFIG_BLK_DEV_AMD74XX=m
> CONFIG_BLK_DEV_ATIIXP=m
> CONFIG_BLK_DEV_CMD64X=m
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> CONFIG_BLK_DEV_SC1200=m
> CONFIG_BLK_DEV_PIIX=m
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> CONFIG_BLK_DEV_SIS5513=m
> CONFIG_BLK_DEV_SLC90E66=m
> # CONFIG_BLK_DEV_TRM290 is not set
> CONFIG_BLK_DEV_VIA82CXXX=m
> # CONFIG_IDE_ARM is not set
> CONFIG_IDE_CHIPSETS=y
>
> #
> # Note: most of these also require special kernel boot parameters
> #
> # CONFIG_BLK_DEV_4DRIVES is not set
> # CONFIG_BLK_DEV_ALI14XX is not set
> # CONFIG_BLK_DEV_DTC2278 is not set
> # CONFIG_BLK_DEV_HT6560B is not set
> # CONFIG_BLK_DEV_QD65XX is not set
> # CONFIG_BLK_DEV_UMC8672 is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> CONFIG_SCSI=m
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> # CONFIG_BLK_DEV_SD is not set
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> # CONFIG_CHR_DEV_SG is not set
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI Transport Attributes
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AHA1740 is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_SCSI_SATA is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_QLA2XXX=m
> # CONFIG_SCSI_QLA21XX is not set
> # CONFIG_SCSI_QLA22XX is not set
> # CONFIG_SCSI_QLA2300 is not set
> # CONFIG_SCSI_QLA2322 is not set
> # CONFIG_SCSI_QLA6312 is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_SIM710 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_ULTRASTOR is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # PCMCIA SCSI adapter support
> #
> # CONFIG_PCMCIA_AHA152X is not set
> # CONFIG_PCMCIA_FDOMAIN is not set
> # CONFIG_PCMCIA_NINJA_SCSI is not set
> # CONFIG_PCMCIA_QLOGIC is not set
> # CONFIG_PCMCIA_SYM53C500 is not set
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Networking support
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_ARPD is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_TUNNEL is not set
> CONFIG_IP_TCPDIAG=y
> # CONFIG_IP_TCPDIAG_IPV6 is not set
> CONFIG_IPV6=m
> CONFIG_IPV6_PRIVACY=y
> CONFIG_INET6_AH=m
> CONFIG_INET6_ESP=m
> CONFIG_INET6_IPCOMP=m
> CONFIG_INET6_TUNNEL=m
> CONFIG_IPV6_TUNNEL=m
> # CONFIG_NETFILTER is not set
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> CONFIG_ATM=m
> # CONFIG_ATM_CLIP is not set
> # CONFIG_ATM_LANE is not set
> # CONFIG_ATM_BR2684 is not set
> # CONFIG_BRIDGE is not set
> CONFIG_VLAN_8021Q=m
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> # CONFIG_NET_CLS_ROUTE is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> CONFIG_NETDEVICES=y
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=m
> # CONFIG_NET_SB1000 is not set
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=m
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
>
> #
> # Tulip family network device support
> #
> CONFIG_NET_TULIP=y
> # CONFIG_DE2104X is not set
> # CONFIG_TULIP is not set
> # CONFIG_DE4X5 is not set
> # CONFIG_WINBOND_840 is not set
> # CONFIG_DM9102 is not set
> CONFIG_PCMCIA_XIRCOM=m
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> # CONFIG_NET_PCI is not set
> # CONFIG_NET_POCKET is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SKGE is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2 is not set
>
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_IXGB is not set
> # CONFIG_S2IO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> CONFIG_NET_RADIO=y
>
> #
> # Obsolete Wireless cards support (pre-802.11)
> #
> CONFIG_STRIP=m
> CONFIG_ARLAN=m
> CONFIG_WAVELAN=m
> CONFIG_PCMCIA_WAVELAN=m
> CONFIG_PCMCIA_NETWAVE=m
>
> #
> # Wireless 802.11 Frequency Hopping cards support
> #
> CONFIG_PCMCIA_RAYCS=m
>
> #
> # Wireless 802.11b ISA/PCI cards support
> #
> CONFIG_AIRO=m
> CONFIG_HERMES=m
> CONFIG_PLX_HERMES=m
> CONFIG_TMD_HERMES=m
> CONFIG_PCI_HERMES=m
> CONFIG_ATMEL=m
> CONFIG_PCI_ATMEL=m
>
> #
> # Wireless 802.11b Pcmcia/Cardbus cards support
> #
> CONFIG_PCMCIA_HERMES=m
> CONFIG_AIRO_CS=m
> CONFIG_PCMCIA_ATMEL=m
> CONFIG_PCMCIA_WL3501=m
>
> #
> # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
> #
> CONFIG_PRISM54=m
> CONFIG_NET_WIRELESS=y
>
> #
> # PCMCIA network device support
> #
> CONFIG_NET_PCMCIA=y
> CONFIG_PCMCIA_3C589=m
> CONFIG_PCMCIA_3C574=m
> CONFIG_PCMCIA_FMVJ18X=m
> CONFIG_PCMCIA_PCNET=m
> CONFIG_PCMCIA_NMCLAN=m
> CONFIG_PCMCIA_SMC91C92=m
> CONFIG_PCMCIA_XIRC2PS=m
> CONFIG_PCMCIA_AXNET=m
>
> #
> # Wan interfaces
> #
> CONFIG_WAN=y
> CONFIG_HOSTESS_SV11=m
> CONFIG_COSA=m
> CONFIG_DSCC4=m
> CONFIG_DSCC4_PCISYNC=y
> CONFIG_DSCC4_PCI_RST=y
> CONFIG_LANMEDIA=m
> CONFIG_SEALEVEL_4021=m
> CONFIG_SYNCLINK_SYNCPPP=m
> CONFIG_HDLC=m
> CONFIG_HDLC_RAW=y
> CONFIG_HDLC_RAW_ETH=y
> CONFIG_HDLC_CISCO=y
> CONFIG_HDLC_FR=y
> CONFIG_HDLC_PPP=y
>
> #
> # X.25/LAPB support is disabled
> #
> CONFIG_PCI200SYN=m
> CONFIG_WANXL=m
> CONFIG_PC300=m
> CONFIG_PC300_MLPPP=y
> CONFIG_N2=m
> CONFIG_C101=m
> CONFIG_FARSYNC=m
> CONFIG_DLCI=m
> CONFIG_DLCI_COUNT=24
> CONFIG_DLCI_MAX=8
> CONFIG_SDLA=m
> CONFIG_SBNI=m
> CONFIG_SBNI_MULTILINE=y
>
> #
> # ATM drivers
> #
> # CONFIG_ATM_TCP is not set
> # CONFIG_ATM_LANAI is not set
> # CONFIG_ATM_ENI is not set
> # CONFIG_ATM_FIRESTREAM is not set
> # CONFIG_ATM_ZATM is not set
> # CONFIG_ATM_NICSTAR is not set
> # CONFIG_ATM_IDT77252 is not set
> # CONFIG_ATM_AMBASSADOR is not set
> # CONFIG_ATM_HORIZON is not set
> # CONFIG_ATM_IA is not set
> # CONFIG_ATM_FORE200E_MAYBE is not set
> # CONFIG_ATM_HE is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=m
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> CONFIG_PPP_BSDCOMP=m
> CONFIG_PPPOE=m
> CONFIG_PPPOATM=m
> # CONFIG_SLIP is not set
> # CONFIG_NET_FC is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> CONFIG_KEYBOARD_SUNKBD=m
> CONFIG_KEYBOARD_LKKBD=m
> CONFIG_KEYBOARD_XTKBD=m
> CONFIG_KEYBOARD_NEWTON=m
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_SERIAL=m
> CONFIG_MOUSE_INPORT=m
> CONFIG_MOUSE_ATIXL=y
> CONFIG_MOUSE_LOGIBM=m
> CONFIG_MOUSE_PC110PAD=m
> # CONFIG_MOUSE_VSXXXAA is not set
> CONFIG_INPUT_JOYSTICK=y
> CONFIG_JOYSTICK_ANALOG=m
> CONFIG_JOYSTICK_A3D=m
> CONFIG_JOYSTICK_ADI=m
> CONFIG_JOYSTICK_COBRA=m
> CONFIG_JOYSTICK_GF2K=m
> CONFIG_JOYSTICK_GRIP=m
> CONFIG_JOYSTICK_GRIP_MP=m
> CONFIG_JOYSTICK_GUILLEMOT=m
> CONFIG_JOYSTICK_INTERACT=m
> CONFIG_JOYSTICK_SIDEWINDER=m
> CONFIG_JOYSTICK_TMDC=m
> CONFIG_JOYSTICK_IFORCE=m
> CONFIG_JOYSTICK_IFORCE_USB=y
> CONFIG_JOYSTICK_IFORCE_232=y
> CONFIG_JOYSTICK_WARRIOR=m
> CONFIG_JOYSTICK_MAGELLAN=m
> CONFIG_JOYSTICK_SPACEORB=m
> CONFIG_JOYSTICK_SPACEBALL=m
> CONFIG_JOYSTICK_STINGER=m
> CONFIG_JOYSTICK_TWIDJOY=m
> CONFIG_JOYSTICK_DB9=m
> CONFIG_JOYSTICK_GAMECON=m
> CONFIG_JOYSTICK_TURBOGRAFX=m
> # CONFIG_JOYSTICK_JOYDUMP is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=m
> # CONFIG_INPUT_UINPUT is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=m
> CONFIG_SERIO_CT82C710=m
> CONFIG_SERIO_PARKBD=m
> CONFIG_SERIO_PCIPS2=m
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> CONFIG_GAMEPORT=m
> CONFIG_GAMEPORT_NS558=m
> CONFIG_GAMEPORT_L4=m
> CONFIG_GAMEPORT_EMU10K1=m
> CONFIG_GAMEPORT_VORTEX=m
> CONFIG_GAMEPORT_FM801=m
> CONFIG_GAMEPORT_CS461X=m
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_CS=m
> CONFIG_SERIAL_8250_ACPI=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> # CONFIG_SERIAL_8250_DETECT_IRQ is not set
> CONFIG_SERIAL_8250_MULTIPORT=y
> CONFIG_SERIAL_8250_RSA=y
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
> # CONFIG_PRINTER is not set
> CONFIG_PPDEV=m
> # CONFIG_TIPAR is not set
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_HW_RANDOM is not set
> CONFIG_NVRAM=m
> CONFIG_RTC=m
> # CONFIG_GEN_RTC is not set
> CONFIG_DTLK=y
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> CONFIG_SONYPI=y
>
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_AGP=m
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD64 is not set
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_EFFICEON is not set
> # CONFIG_DRM is not set
>
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> CONFIG_MWAVE=m
> # CONFIG_RAW_DRIVER is not set
> CONFIG_HPET=y
> CONFIG_HPET_RTC_IRQ=y
> CONFIG_HPET_MMAP=y
> # CONFIG_HANGCHECK_TIMER is not set
>
> #
> # TPM devices
> #
> # CONFIG_TCG_TPM is not set
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # Dallas's 1-wire bus
> #
> # CONFIG_W1 is not set
>
> #
> # Misc devices
> #
> # CONFIG_IBM_ASM is not set
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
>
> #
> # Graphics support
> #
> CONFIG_FB=y
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> CONFIG_FB_SOFT_CURSOR=y
> # CONFIG_FB_MACMODES is not set
> CONFIG_FB_MODE_HELPERS=y
> # CONFIG_FB_TILEBLITTING is not set
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_VGA16 is not set
> CONFIG_FB_VESA=y
> CONFIG_FB_VESA_STD=y
> # CONFIG_FB_VESA_TNG is not set
> CONFIG_VIDEO_SELECT=y
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_I810 is not set
> # CONFIG_FB_INTEL is not set
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON_OLD is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_SAVAGE is not set
> # CONFIG_FB_SIS is not set
> CONFIG_FB_NEOMAGIC=m
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_VIRTUAL is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
>
> #
> # Logo configuration
> #
> CONFIG_LOGO=y
> CONFIG_LOGO_LINUX_MONO=y
> CONFIG_LOGO_LINUX_VGA16=y
> CONFIG_LOGO_LINUX_CLUT224=y
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_BACKLIGHT_CLASS_DEVICE=m
> CONFIG_BACKLIGHT_DEVICE=y
> CONFIG_LCD_CLASS_DEVICE=m
> CONFIG_LCD_DEVICE=y
> # CONFIG_FB_SPLASH is not set
>
> #
> # Speakup console speech
> #
> # CONFIG_SPEAKUP is not set
> CONFIG_SPEAKUP_DEFAULT="none"
>
> #
> # Sound
> #
> CONFIG_SOUND=y
>
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=m
> CONFIG_SND_TIMER=m
> CONFIG_SND_PCM=m
> CONFIG_SND_HWDEP=m
> CONFIG_SND_RAWMIDI=m
> CONFIG_SND_SEQUENCER=m
> # CONFIG_SND_SEQ_DUMMY is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> # CONFIG_SND_SEQUENCER_OSS is not set
> CONFIG_SND_RTCTIMER=m
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
>
> #
> # Generic devices
> #
> CONFIG_SND_OPL3_LIB=m
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
>
> #
> # ISA devices
> #
> # CONFIG_SND_AD1816A is not set
> # CONFIG_SND_AD1848 is not set
> # CONFIG_SND_CS4231 is not set
> # CONFIG_SND_CS4232 is not set
> # CONFIG_SND_CS4236 is not set
> # CONFIG_SND_ES968 is not set
> # CONFIG_SND_ES1688 is not set
> # CONFIG_SND_ES18XX is not set
> # CONFIG_SND_GUSCLASSIC is not set
> # CONFIG_SND_GUSEXTREME is not set
> # CONFIG_SND_GUSMAX is not set
> # CONFIG_SND_INTERWAVE is not set
> # CONFIG_SND_INTERWAVE_STB is not set
> # CONFIG_SND_OPTI92X_AD1848 is not set
> # CONFIG_SND_OPTI92X_CS4231 is not set
> # CONFIG_SND_OPTI93X is not set
> # CONFIG_SND_SB8 is not set
> # CONFIG_SND_SB16 is not set
> # CONFIG_SND_SBAWE is not set
> # CONFIG_SND_WAVEFRONT is not set
> # CONFIG_SND_ALS100 is not set
> # CONFIG_SND_AZT2320 is not set
> # CONFIG_SND_CMI8330 is not set
> # CONFIG_SND_DT019X is not set
> # CONFIG_SND_OPL3SA2 is not set
> # CONFIG_SND_SGALAXY is not set
> # CONFIG_SND_SSCAPE is not set
>
> #
> # PCI devices
> #
> CONFIG_SND_AC97_CODEC=m
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CS46XX is not set
> CONFIG_SND_CS4281=m
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> # CONFIG_SND_CA0106 is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VX222 is not set
> # CONFIG_SND_HDA_INTEL is not set
>
> #
> # USB devices
> #
> # CONFIG_SND_USB_AUDIO is not set
> # CONFIG_SND_USB_USX2Y is not set
>
> #
> # PCMCIA devices
> #
> # CONFIG_SND_VXPOCKET is not set
> # CONFIG_SND_VXP440 is not set
> # CONFIG_SND_PDAUDIOCF is not set
>
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
>
> #
> # USB support
> #
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB=m
> CONFIG_USB_DEBUG=y
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_SUSPEND is not set
> # CONFIG_USB_OTG is not set
>
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=m
> # CONFIG_USB_EHCI_SPLIT_ISO is not set
> # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD=m
> # CONFIG_USB_SL811_HCD is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_AUDIO is not set
> # CONFIG_USB_BLUETOOTH_TTY is not set
> # CONFIG_USB_MIDI is not set
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
>
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
> needed; see USB_STORAGE Help for more information
> #
> CONFIG_USB_STORAGE=m
> CONFIG_USB_STORAGE_DEBUG=y
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_USBAT=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
>
> #
> # USB Input Devices
> #
> # CONFIG_USB_HID is not set
>
> #
> # USB HID Boot Protocol drivers
> #
> # CONFIG_USB_KBD is not set
> # CONFIG_USB_MOUSE is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_MTOUCH is not set
> # CONFIG_USB_EGALAX is not set
> # CONFIG_USB_XPAD is not set
> # CONFIG_USB_ATI_REMOTE is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
>
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
>
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
>
> #
> # USB Network Adapters
> #
> CONFIG_USB_CATC=m
> CONFIG_USB_KAWETH=m
> CONFIG_USB_PEGASUS=m
> CONFIG_USB_RTL8150=m
> CONFIG_USB_USBNET=m
>
> #
> # USB Host-to-Host Cables
> #
> CONFIG_USB_ALI_M5632=y
> CONFIG_USB_AN2720=y
> CONFIG_USB_BELKIN=y
> CONFIG_USB_GENESYS=y
> CONFIG_USB_NET1080=y
> CONFIG_USB_PL2301=y
> CONFIG_USB_KC2190=y
>
> #
> # Intelligent USB Devices/Gadgets
> #
> # CONFIG_USB_ARMLINUX is not set
> # CONFIG_USB_EPSON2888 is not set
> # CONFIG_USB_ZAURUS is not set
> CONFIG_USB_CDCETHER=y
>
> #
> # USB Network Adapters
> #
> CONFIG_USB_AX8817X=y
> CONFIG_USB_ZD1201=m
> # CONFIG_USB_MON is not set
>
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
>
> #
> # USB Serial Converter support
> #
> CONFIG_USB_SERIAL=m
> CONFIG_USB_SERIAL_GENERIC=y
> CONFIG_USB_SERIAL_AIRPRIME=m
> CONFIG_USB_SERIAL_BELKIN=m
> CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
> CONFIG_USB_SERIAL_CP2101=m
> CONFIG_USB_SERIAL_CYPRESS_M8=m
> CONFIG_USB_SERIAL_EMPEG=m
> CONFIG_USB_SERIAL_FTDI_SIO=m
> CONFIG_USB_SERIAL_VISOR=m
> CONFIG_USB_SERIAL_IPAQ=m
> # CONFIG_USB_SERIAL_IR is not set
> CONFIG_USB_SERIAL_EDGEPORT=m
> CONFIG_USB_SERIAL_EDGEPORT_TI=m
> CONFIG_USB_SERIAL_GARMIN=m
> CONFIG_USB_SERIAL_IPW=m
> # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
> # CONFIG_USB_SERIAL_KEYSPAN is not set
> # CONFIG_USB_SERIAL_KLSI is not set
> # CONFIG_USB_SERIAL_KOBIL_SCT is not set
> CONFIG_USB_SERIAL_MCT_U232=m
> CONFIG_USB_SERIAL_PL2303=m
> # CONFIG_USB_SERIAL_HP4X is not set
> # CONFIG_USB_SERIAL_SAFE is not set
> CONFIG_USB_SERIAL_TI=m
> # CONFIG_USB_SERIAL_CYBERJACK is not set
> # CONFIG_USB_SERIAL_XIRCOM is not set
> CONFIG_USB_SERIAL_OMNINET=m
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_PHIDGETKIT is not set
> # CONFIG_USB_PHIDGETSERVO is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_TEST is not set
>
> #
> # USB ATM/DSL drivers
> #
> # CONFIG_USB_ATM is not set
> # CONFIG_USB_SPEEDTOUCH is not set
>
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
>
> #
> # MMC/SD Card support
> #
> # CONFIG_MMC is not set
>
> #
> # InfiniBand support
> #
> # CONFIG_INFINIBAND is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> CONFIG_REISERFS_FS_XATTR=y
> CONFIG_REISERFS_FS_POSIX_ACL=y
> CONFIG_REISERFS_FS_SECURITY=y
> CONFIG_JFS_FS=m
> CONFIG_JFS_POSIX_ACL=y
> # CONFIG_JFS_SECURITY is not set
> # CONFIG_JFS_DEBUG is not set
> # CONFIG_JFS_STATISTICS is not set
> CONFIG_FS_POSIX_ACL=y
>
> #
> # XFS support
> #
> CONFIG_XFS_FS=y
> CONFIG_XFS_EXPORT=y
> CONFIG_XFS_RT=y
> CONFIG_XFS_QUOTA=y
> CONFIG_XFS_SECURITY=y
> CONFIG_XFS_POSIX_ACL=y
> CONFIG_MINIX_FS=m
> CONFIG_ROMFS_FS=m
> CONFIG_INOTIFY=y
> CONFIG_QUOTA=y
> CONFIG_QFMT_V1=m
> CONFIG_QFMT_V2=m
> CONFIG_QUOTACTL=y
> CONFIG_DNOTIFY=y
> CONFIG_AUTOFS_FS=m
> CONFIG_AUTOFS4_FS=m
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_ZISOFS_FS=y
> CONFIG_UDF_FS=y
> CONFIG_UDF_NLS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_SYSFS=y
> # CONFIG_DEVFS_FS is not set
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> CONFIG_TMPFS_XATTR=y
> CONFIG_TMPFS_SECURITY=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> CONFIG_BEFS_FS=m
> # CONFIG_BEFS_DEBUG is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> CONFIG_CRAMFS=m
> # CONFIG_SQUASHFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> CONFIG_NFS_V4=y
> # CONFIG_NFS_DIRECTIO is not set
> CONFIG_NFSD=m
> CONFIG_NFSD_V3=y
> CONFIG_NFSD_V4=y
> CONFIG_NFSD_TCP=y
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=y
> CONFIG_SUNRPC=m
> CONFIG_SUNRPC_GSS=m
> CONFIG_RPCSEC_GSS_KRB5=m
> CONFIG_RPCSEC_GSS_SPKM3=m
> CONFIG_SMB_FS=m
> CONFIG_SMB_NLS_DEFAULT=y
> CONFIG_SMB_NLS_REMOTE="cp437"
> CONFIG_CIFS=m
> # CONFIG_CIFS_STATS is not set
> # CONFIG_CIFS_XATTR is not set
> # CONFIG_CIFS_EXPERIMENTAL is not set
> CONFIG_NCP_FS=m
> # CONFIG_NCPFS_PACKET_SIGNING is not set
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> # CONFIG_NCPFS_STRONG is not set
> # CONFIG_NCPFS_NFS_NS is not set
> # CONFIG_NCPFS_OS2_NS is not set
> # CONFIG_NCPFS_SMALLDOS is not set
> CONFIG_NCPFS_NLS=y
> # CONFIG_NCPFS_EXTRAS is not set
> CONFIG_CODA_FS=m
> # CONFIG_CODA_FS_OLD_API is not set
> CONFIG_AFS_FS=m
> CONFIG_RXRPC=m
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> # CONFIG_OSF_PARTITION is not set
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> # CONFIG_MAC_PARTITION is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> CONFIG_MINIX_SUBPARTITION=y
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> CONFIG_LDM_PARTITION=y
> # CONFIG_LDM_DEBUG is not set
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> # CONFIG_EFI_PARTITION is not set
>
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=m
> CONFIG_NLS_CODEPAGE_855=m
> CONFIG_NLS_CODEPAGE_857=m
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> CONFIG_NLS_CODEPAGE_862=m
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> CONFIG_NLS_CODEPAGE_936=m
> CONFIG_NLS_CODEPAGE_950=m
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=m
> CONFIG_NLS_CODEPAGE_874=m
> CONFIG_NLS_ISO8859_8=m
> CONFIG_NLS_CODEPAGE_1250=m
> CONFIG_NLS_CODEPAGE_1251=m
> CONFIG_NLS_ASCII=m
> CONFIG_NLS_ISO8859_1=y
> CONFIG_NLS_ISO8859_2=m
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> CONFIG_NLS_ISO8859_6=m
> CONFIG_NLS_ISO8859_7=m
> CONFIG_NLS_ISO8859_9=m
> CONFIG_NLS_ISO8859_13=m
> CONFIG_NLS_ISO8859_14=m
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=m
> CONFIG_NLS_KOI8_U=m
> CONFIG_NLS_UTF8=y
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_PRINTK_TIME is not set
> CONFIG_DEBUG_KERNEL=y
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_LOG_BUF_SHIFT=15
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_DEBUG_SLAB is not set
> CONFIG_DEBUG_PREEMPT=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_KOBJECT is not set
> # CONFIG_DEBUG_HIGHMEM is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_FS is not set
> # CONFIG_FRAME_POINTER is not set
> CONFIG_EARLY_PRINTK=y
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_KPROBES is not set
> # CONFIG_DEBUG_STACK_USAGE is not set
> # CONFIG_DEBUG_PAGEALLOC is not set
> CONFIG_4KSTACKS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> CONFIG_CRYPTO=y
> CONFIG_CRYPTO_HMAC=y
> # CONFIG_CRYPTO_NULL is not set
> CONFIG_CRYPTO_MD4=m
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_SHA1=m
> CONFIG_CRYPTO_SHA256=m
> CONFIG_CRYPTO_SHA512=m
> CONFIG_CRYPTO_WP512=m
> CONFIG_CRYPTO_TGR192=m
> CONFIG_CRYPTO_DES=y
> CONFIG_CRYPTO_BLOWFISH=m
> CONFIG_CRYPTO_TWOFISH=m
> CONFIG_CRYPTO_SERPENT=m
> CONFIG_CRYPTO_AES_586=m
> CONFIG_CRYPTO_CAST5=m
> CONFIG_CRYPTO_CAST6=m
> CONFIG_CRYPTO_TEA=m
> CONFIG_CRYPTO_ARC4=m
> CONFIG_CRYPTO_KHAZAD=m
> CONFIG_CRYPTO_ANUBIS=m
> CONFIG_CRYPTO_DEFLATE=m
> CONFIG_CRYPTO_MICHAEL_MIC=m
> CONFIG_CRYPTO_CRC32C=m
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Hardware crypto devices
> #
> CONFIG_CRYPTO_DEV_PADLOCK=m
> CONFIG_CRYPTO_DEV_PADLOCK_AES=y
>
> #
> # Library routines
> #
> CONFIG_CRC_CCITT=m
> CONFIG_CRC32=y
> CONFIG_LIBCRC32C=m
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=m
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_X86_SMP=y
> CONFIG_X86_HT=y
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_X86_TRAMPOLINE=y
> CONFIG_PC=y
>
> lsmod
>
> Module Size Used by
> pcmcia 29972 4
> rtc 10260 0
> pcspkr 4684 0
> parport_pc 36036 0
> parport 26560 1 parport_pc
> floppy 60052 1
> neofb 19740 1
> vgastate 11520 1 neofb
> piix 11524 0 [permanent]
> xircom_cb 12672 0
> cs461x 5128 0
> gameport 17800 2 cs461x
> yenta_socket 23048 3
> rsrc_nonstatic 13696 1 yenta_socket
> pcmcia_core 53892 3 pcmcia,yenta_socket,rsrc_nonstatic
> uhci_hcd 33548 0
> usb_storage 109328 0
> scsi_mod 97352 1 usb_storage
> ehci_hcd 45320 0
> usbcore 128220 4 uhci_hcd,usb_storage,ehci_hcd
>
>
> pspci output
> 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
> bridge (rev 03)
> Flags: bus master, medium devsel, latency 64
> Memory at 40000000 (32-bit, prefetchable)
> Capabilities: [a0] AGP version 1.0
>
> 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP
> bridge (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, 66Mhz, medium devsel, latency 168
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: 70000000-dfffffff
> Prefetchable memory behind bridge: e0000000-f7ffffff
> Expansion ROM at 0000d000 [disabled] [size=4K]
>
> 0000:00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
> Subsystem: IBM: Unknown device 0130
> Flags: bus master, medium devsel, latency 168, IRQ 10
> Memory at 50103000 (32-bit, non-prefetchable)
> Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
> Memory window 0: 0c000000-0c3ff000 (prefetchable)
> Memory window 1: 0c400000-0c7ff000
> I/O window 0: 00004800-000048ff
> I/O window 1: 00004c00-00004cff
> 16-bit legacy interface ports at 0001
>
> 0000:00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
> Subsystem: IBM: Unknown device 0130
> Flags: bus master, medium devsel, latency 168, IRQ 11
> Memory at 50102000 (32-bit, non-prefetchable)
> Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
> Memory window 0: 0c800000-0cbff000 (prefetchable)
> Memory window 1: 0cc00000-0cfff000
> I/O window 0: 00005000-000050ff
> I/O window 1: 00005400-000054ff
> 16-bit legacy interface ports at 0001
>
> 0000:00:03.0 Communication controller: Agere Systems (former Lucent
> Microelectronics) WinModem 56k (rev 01)
> Subsystem: IBM: Unknown device 018c
> Flags: bus master, medium devsel, latency 0, IRQ 11
> Memory at 50101000 (32-bit, non-prefetchable)
> I/O ports at 4500 [size=8]
> I/O ports at 4400 [size=256]
> Capabilities: [f8] Power Management version 2
>
> 0000:00:06.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
> [CrystalClear SoundFusion Audio Accelerator] (rev 01)
> Subsystem: IBM: Unknown device 0153
> Flags: bus master, slow devsel, latency 64, IRQ 10
> Memory at 50100000 (32-bit, non-prefetchable)
> Memory at 50000000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [40] Power Management version 2
>
> 0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
> Flags: bus master, medium devsel, latency 0
>
> 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
> (prog-if 80 [Master])
> Flags: bus master, medium devsel, latency 48
> I/O ports at fcf0 [size=16]
>
> 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
> (prog-if 00 [UHCI])
> Flags: bus master, medium devsel, latency 48, IRQ 11
> I/O ports at 4000 [size=32]
>
> 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
> Flags: medium devsel, IRQ 9
>
> 0000:01:00.0 VGA compatible controller: Neomagic Corporation NM2360
> [MagicMedia 256ZX] (prog-if 00 [VGA])
> Subsystem: IBM: Unknown device 0000
> Flags: bus master, medium devsel, latency 128, IRQ 10
> Memory at e0000000 (32-bit, prefetchable)
> Memory at 70000000 (32-bit, non-prefetchable) [size=4M]
> Memory at 70400000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [dc] Power Management version 1
>
> 0000:06:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
> Subsystem: Xircom Cardbus Ethernet 10/100
> Flags: bus master, medium devsel, latency 64, IRQ 11
> I/O ports at 5000 [size=200M]
> Memory at 0cc00000 (32-bit, non-prefetchable) [size=2K]
> Memory at 0cc00800 (32-bit, non-prefetchable) [size=2K]
> Expansion ROM at 00004000 [disabled]
> Capabilities: [dc] Power Management version 1
--
gentoo-laptop@gentoo.org mailing list
^ permalink raw reply [flat|nested] 3+ messages in thread
* [gentoo-laptop] Re: xircom cardbus card cannot receive data
2005-12-08 16:29 ` Mauro Maroni
@ 2005-12-17 14:22 ` Akhil Srinivasan
0 siblings, 0 replies; 3+ messages in thread
From: Akhil Srinivasan @ 2005-12-17 14:22 UTC (permalink / raw
To: gentoo-laptop
Problem Solved, the ACPI chipset on the 600X is a little bit odd. I
had to add a couple of kernel options. But is fine now.
Thanks
On 12/8/05, Mauro Maroni <mmaroni@fi.uba.ar> wrote:
> I do not know what /proc/net/dev really shows...but just in case:
> Do you have correct IP settings? If you, for example, have a wrong IP
> address,
> you are not going to receive any packet (at least at layer 3)
>
> I have a TP600E with both wireless and wired cardbus cards and never had a
> problem
>
> Regards,
> Mauro
>
> On Thursday 08 December 2005 07:53, Akhil Srinivasan wrote:
> > Hi
> > I have installed Gentoo 2005.1 i686 on my Thinkpad 600x and after
> wrestling
> > with the kernel, its come to the point where my network card does not
> > receive any data. The cat /proc/net/dev output shows bytes transmitted but
> > nothing received. The cables and connection have been checked out with
> > other computers.
> >
> > Outputs for various utilities and my kernel configuration have been given
> > below. I hope somebody can puzzle out the problem.
> > Sorry if its too verbose, but don't want to take the chance on missing any
> > data that might help.
> >
> > Akhil Srinivasan
> >
> > Dmesg
> > Linux version 2.6.12-gentoo-r6 (root@akhilss) (gcc version
> > 3.3.5-20050130(Gentoo
> > 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 SMP Thu Dec 8
> > 12:13:03 IST 2005
> > BIOS-provided physical RAM map:
> > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> > BIOS-e820: 0000000000100000 - 000000000bfd0000 (usable)
> > BIOS-e820: 000000000bfd0000 - 000000000bfdf000 (ACPI data)
> > BIOS-e820: 000000000bfdf000 - 000000000bfe0000 (ACPI NVS)
> > BIOS-e820: 000000000bfe0000 - 000000000c000000 (reserved)
> > BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
> > 0MB HIGHMEM available.
> > 191MB LOWMEM available.
> > On node 0 totalpages: 49104
> > DMA zone: 4096 pages, LIFO batch:1
> > Normal zone: 45008 pages, LIFO batch:15
> > HighMem zone: 0 pages, LIFO batch:1
> > DMI 2.2 present.
> > ACPI: RSDP (v000 IBM ) @ 0x000fd6e0
> > ACPI: RSDT (v001 IBM TP600X 0x00000001 0x00000000) @ 0x0bfd0000
> > ACPI: FADT (v001 IBM TP600X 0x00000001 0x00000000) @ 0x0bfd0100
> > ACPI: BOOT (v001 IBM TP600X 0x00000001 0x00000000) @ 0x0bfd0040
> > ACPI: DSDT (v001 IBM TP600X 0x00000106 MSFT 0x0100000c) @ 0x00000000
> > ACPI: PM-Timer IO Port: 0xef08
> > Allocating PCI resources starting at 0c000000 (gap: 0c000000:f3fe0000)
> > Built 1 zonelists
> > Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192
> > real_root=/dev/hda3 udev
> > Local APIC disabled by BIOS -- you can enable it with "lapic"
> > mapped APIC to ffffd000 (011c1000)
> > Initializing CPU#0
> > CPU 0 irqstacks, hard=c0494000 soft=c048c000
> > PID hash table entries: 1024 (order: 10, 16384 bytes)
> > Detected 498.316 MHz processor.
> > Using pmtmr for high-res timesource
> > Console: colour VGA+ 80x25
> > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> > Memory: 189060k/196416k available (2444k kernel code, 6836k reserved, 955k
> > data, 208k init, 0k highmem)
> > Checking if this processor honours the WP bit even in supervisor mode...
> > Ok.
> >
> > Calibrating delay loop... 985.08 BogoMIPS (lpj=492544)
> > Mount-cache hash table entries: 512
> > CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
> > 00000000 00000000 00000000
> > CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
> > 00000000 00000000 00000000
> > CPU: L1 I cache: 16K, L1 D cache: 16K
> > CPU: L2 cache: 256K
> > CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
> > 00000000 00000000
> > Enabling fast FPU save and restore... done.
> > Enabling unmasked SIMD FPU exception support... done.
> > Checking 'hlt' instruction... OK.
> > ACPI: setting ELCR to 0200 (from 0800)
> > CPU0: Intel Pentium III (Coppermine) stepping 01
> > SMP motherboard not detected.
> > Local APIC not detected. Using dummy APIC emulation.
> > Brought up 1 CPUs
> > CPU0 attaching sched-domain:
> > domain 0: span 01
> > groups: 01
> > domain 1: span 01
> > groups: 01
> > checking if image is initramfs... it is
> > Freeing initrd memory: 881k freed
> > NET: Registered protocol family 16
> > EISA bus registered
> > PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
> > PCI: Using configuration type 1
> > mtrr: v2.0 (20020519)
> > ACPI: Subsystem revision 20050309
> > ACPI: Interpreter enabled
> > ACPI: Using PIC for interrupt routing
> > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
> > disabled.
> > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
> > disabled.
> > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
> > disabled.
> > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
> > disabled.
> > ACPI: PCI Root Bridge [PCI0] (0000:00)
> > PCI: Probing PCI hardware (bus 00)
> > PCI: Scanning bus 0000:00
> > PCI: Found 0000:00:00.0 [8086/7190] 000600 00
> > PCI: Calling quirk c0284ac0 for 0000:00:00.0
> > PCI: Calling quirk c0284f50 for 0000:00:00.0
> > PCI: Calling quirk c0307fb0 for 0000:00:00.0
> > PCI: Calling quirk c0308160 for 0000:00:00.0
> > PCI: Calling quirk c03082f0 for 0000:00:00.0
> > PCI: Found 0000:00:01.0 [8086/7191] 000604 01
> > PCI: Calling quirk c0284ac0 for 0000:00:01.0
> > PCI: Calling quirk c0284f50 for 0000:00:01.0
> > PCI: Calling quirk c0307fb0 for 0000:00:01.0
> > PCI: Calling quirk c0308160 for 0000:00:01.0
> > PCI: Calling quirk c03082f0 for 0000:00:01.0
> > PCI: Found 0000:00:02.0 [104c/ac1b] 000607 02
> > PCI: Calling quirk c0284ac0 for 0000:00:02.0
> > PCI: Calling quirk c0284f50 for 0000:00:02.0
> > PCI: Calling quirk c0307fb0 for 0000:00:02.0
> > PCI: Calling quirk c03082f0 for 0000:00:02.0
> > PCI: Found 0000:00:02.1 [104c/ac1b] 000607 02
> > PCI: Calling quirk c0284ac0 for 0000:00:02.1
> > PCI: Calling quirk c0284f50 for 0000:00:02.1
> > PCI: Calling quirk c0307fb0 for 0000:00:02.1
> > PCI: Calling quirk c03082f0 for 0000:00:02.1
> > PCI: Found 0000:00:03.0 [11c1/0449] 000780 00
> > PCI: Calling quirk c0284ac0 for 0000:00:03.0
> > PCI: Calling quirk c0284f50 for 0000:00:03.0
> > PCI: Calling quirk c0307fb0 for 0000:00:03.0
> > PCI: Calling quirk c03082f0 for 0000:00:03.0
> > PCI: Found 0000:00:06.0 [1013/6003] 000401 00
> > PCI: Calling quirk c0284ac0 for 0000:00:06.0
> > PCI: Calling quirk c0284f50 for 0000:00:06.0
> > PCI: Calling quirk c0307fb0 for 0000:00:06.0
> > PCI: Calling quirk c03082f0 for 0000:00:06.0
> > PCI: Found 0000:00:07.0 [8086/7110] 000680 00
> > PCI: Calling quirk c0284ac0 for 0000:00:07.0
> > PCI: Calling quirk c0284f50 for 0000:00:07.0
> > PCI: Calling quirk c0307fb0 for 0000:00:07.0
> > PCI: Calling quirk c0308160 for 0000:00:07.0
> > PCI: Calling quirk c03082f0 for 0000:00:07.0
> > PCI: Found 0000:00:07.1 [8086/7111] 000101 00
> > PCI: Calling quirk c0284ac0 for 0000:00:07.1
> > PCI: Calling quirk c0284f50 for 0000:00:07.1
> > PCI: Calling quirk c0307fb0 for 0000:00:07.1
> > PCI: Calling quirk c0308160 for 0000:00:07.1
> > PCI: Calling quirk c03082f0 for 0000:00:07.1
> > PCI: Found 0000:00:07.2 [8086/7112] 000c03 00
> > PCI: Calling quirk c0284940 for 0000:00:07.2
> > PCI: Calling quirk c0284ac0 for 0000:00:07.2
> > PCI: Calling quirk c0284f50 for 0000:00:07.2
> > PCI: Calling quirk c0307fb0 for 0000:00:07.2
> > PCI: Calling quirk c0308160 for 0000:00:07.2
> > PCI: Calling quirk c03082f0 for 0000:00:07.2
> > PCI: Found 0000:00:07.3 [8086/7113] 000680 00
> > PCI: Calling quirk c0284640 for 0000:00:07.3
> > PCI: Calling quirk c0284ac0 for 0000:00:07.3
> > PCI: Calling quirk c0284f50 for 0000:00:07.3
> > PCI: Calling quirk c0307fb0 for 0000:00:07.3
> > PCI: Calling quirk c0308060 for 0000:00:07.3
> > PCI: Calling quirk c0308160 for 0000:00:07.3
> > PCI: Calling quirk c03082f0 for 0000:00:07.3
> > PCI: Fixups for bus 0000:00
> > PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
> > PCI: Scanning bus 0000:01
> > PCI: Found 0000:01:00.0 [10c8/0006] 000300 00
> > PCI: Calling quirk c0284ac0 for 0000:01:00.0
> > PCI: Calling quirk c0284f50 for 0000:01:00.0
> > PCI: Calling quirk c0307fb0 for 0000:01:00.0
> > PCI: Calling quirk c03082f0 for 0000:01:00.0
> > Boot video device is 0000:01:00.0
> > PCI: Fixups for bus 0000:01
> > PCI: Bus scan for 0000:01 returning with max=01
> > PCI: Scanning behind PCI bridge 0000:00:02.0, config 040200, pass 0
> > PCI: Scanning behind PCI bridge 0000:00:02.1, config 070500, pass 0
> > PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 1
> > PCI: Scanning behind PCI bridge 0000:00:02.0, config 040200, pass 1
> > PCI: Scanning behind PCI bridge 0000:00:02.1, config 070500, pass 1
> > PCI: Bus scan for 0000:00 returning with max=09
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
> > ACPI: Power Resource [PSIO] (on)
> > ACPI: Embedded Controller [EC0] (gpe 9)
> > ACPI: Power Resource [PFN0] (off)
> > ACPI: Power Resource [PVID] (on)
> > ACPI: Power Resource [PRSD] (off)
> > ACPI: Power Resource [PDCK] (on)
> > Linux Plug and Play Support v0.97 (c) Adam Belay
> > pnp: PnP ACPI init
> > pnp: PnP ACPI: found 12 devices
> > PCI: Using ACPI for IRQ routing
> > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> > report
> > pnp: 00:07: ioport range 0x15e0-0x15ef has been reserved
> > pnp: 00:07: ioport range 0xef00-0xef3f could not be reserved
> > pnp: 00:07: ioport range 0xefa0-0xefaf has been reserved
> > Simple Boot Flag at 0x33 set to 0x1
> > inotify device minor=63
> > VFS: Disk quotas dquot_6.5.1
> > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > SGI XFS with ACLs, security attributes, realtime, large block numbers, no
> > debug enabled
> > SGI XFS Quota Management subsystem
> > Initializing Cryptographic API
> > PCI: Calling quirk c02844b0 for 0000:00:00.0
> > Limiting direct PCI/PCI transfers.
> > PCI: Calling quirk c02849d0 for 0000:00:00.0
> > PCI: Calling quirk c02844b0 for 0000:00:01.0
> > PCI: Calling quirk c02849d0 for 0000:00:01.0
> > PCI: Calling quirk c02849d0 for 0000:00:02.0
> > PCI: Calling quirk c02849d0 for 0000:00:02.1
> > PCI: Calling quirk c02849d0 for 0000:00:03.0
> > PCI: Calling quirk c02849d0 for 0000:00:06.0
> > PCI: Calling quirk c02849d0 for 0000:00:07.0
> > PCI: Calling quirk c02849d0 for 0000:00:07.1
> > PCI: Calling quirk c02849d0 for 0000:00:07.2
> > PCI: Calling quirk c02849d0 for 0000:00:07.3
> > PCI: Calling quirk c02849d0 for 0000:01:00.0
> >
> > DoubleTalk PC - not found
> > isapnp: Scanning for PnP cards...
> > isapnp: No Plug & Play device found
> > PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
> > serio: i8042 AUX port at 0x60,0x64 irq 12
> > serio: i8042 KBD port at 0x60,0x64 irq 1
> > Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
> > pnp: Device 00:02 activated.
> > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> > mice: PS/2 mouse device common for all mice
> > io scheduler noop registered
> > io scheduler deadline registered
> > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> > Probing IDE interface ide0...
> > input: AT Translated Set 2 keyboard on isa0060/serio0
> > hda: IBM-DARA-212000, ATA DISK drive
> > logips2pp: Detected unknown logitech mouse model 85
> > input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
> > Probing IDE interface ide1...
> > hdc: TOSHIBA DVD-ROM SD-C2302, ATAPI CD/DVD-ROM drive
> > Probing IDE interface ide2...
> > Probing IDE interface ide3...
> > Probing IDE interface ide4...
> > Probing IDE interface ide5...
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > ide1 at 0x170-0x177,0x376 on irq 15
> > hda: max request size: 128KiB
> > hda: 23572080 sectors (12068 MB) w/418KiB Cache, CHS=24944/15/63
> > hda: cache flushes not supported
> > hda: hda1 hda2 hda3
> > hdc: ATAPI 24X DVD-ROM drive, 128kB Cache
> > Uniform CD-ROM driver Revision: 3.20
> > EISA: Probing bus 0 at eisa.0
> > Cannot allocate resource for EISA slot 4
> > EISA: Detected 0 cards.
> > NET: Registered protocol family 2
> > IP: routing cache hash table of 512 buckets, 8Kbytes
> > TCP established hash table entries: 8192 (order: 5, 131072 bytes)
> > TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
> > TCP: Hash tables configured (established 8192 bind 8192)
> > NET: Registered protocol family 1
> > NET: Registered protocol family 17
> > Freeing unused kernel memory: 208k freed
> > usbcore: registered new driver usbfs
> > usbcore: registered new driver hub
> > ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
> > SCSI subsystem initialized
> > Initializing USB Mass Storage driver...
> > usbcore: registered new driver usb-storage
> > USB Mass Storage support registered.
> > USB Universal Host Controller Interface driver v2.2
> > ACPI: PCI Interrupt Link [LNKD] disabled and referenced, BIOS bug.
> > ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
> > ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> > PCI: setting IRQ 11 as level-triggered
> > ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low)
> > -> IRQ 11
> > uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
> > uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
> > uhci_hcd 0000:00:07.2: irq 11, io base 0x00004000
> > uhci_hcd 0000:00:07.2: detected 2 ports
> > usb usb1: default language 0x0409
> > usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb1: Product: Intel Corporation 82371AB/EB/MB PIIX4 USB
> > usb usb1: Manufacturer: Linux 2.6.12-gentoo-r6 uhci_hcd
> > usb usb1: SerialNumber: 0000:00:07.2
> > usb usb1: hotplug
> > usb usb1: adding 1-0:1.0 (config #1, interface 0)
> > usb 1-0:1.0: hotplug
> > hub 1-0:1.0: usb_probe_interface
> > hub 1-0:1.0: usb_probe_interface - got id
> > hub 1-0:1.0: USB hub found
> > hub 1-0:1.0: 2 ports detected
> > hub 1-0:1.0: standalone hub
> > hub 1-0:1.0: no power switching (usb 1.0)
> > hub 1-0:1.0: individual port over-current protection
> > hub 1-0:1.0: power on to power good time: 2ms
> > hub 1-0:1.0: local power source is good
> > hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0000
> > ReiserFS: hda3: found reiserfs format "3.6" with standard journal
> > ReiserFS: hda3: using ordered data mode
> > ReiserFS: hda3: journal params: device hda3, size 8192, journal first
> block
> > 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> > ReiserFS: hda3: checking transaction log (hda3)
> > ReiserFS: hda3: Using r5 hash to sort names
> > uhci_hcd 0000:00:07.2: suspend_hc
> > spurious 8259A interrupt: IRQ7.
> > Adding 500368k swap on /dev/hda2. Priority:-1 extents:1
> >
> > kernel config
> > #
> > # Automatically generated make config: don't edit
> > # Linux kernel version: 2.6.12-gentoo-r6
> > # Thu Dec 8 11:46:57 2005
> > #
> > CONFIG_X86=y
> > CONFIG_MMU=y
> > CONFIG_UID16=y
> > CONFIG_GENERIC_ISA_DMA=y
> > CONFIG_GENERIC_IOMAP=y
> >
> > #
> > # Code maturity level options
> > #
> > CONFIG_EXPERIMENTAL=y
> > CONFIG_CLEAN_COMPILE=y
> > CONFIG_LOCK_KERNEL=y
> > CONFIG_INIT_ENV_ARG_LIMIT=32
> >
> > #
> > # General setup
> > #
> > CONFIG_LOCALVERSION=""
> > CONFIG_SWAP=y
> > CONFIG_SYSVIPC=y
> > CONFIG_POSIX_MQUEUE=y
> > # CONFIG_BSD_PROCESS_ACCT is not set
> > CONFIG_SYSCTL=y
> > # CONFIG_AUDIT is not set
> > CONFIG_HOTPLUG=y
> > CONFIG_KOBJECT_UEVENT=y
> > CONFIG_IKCONFIG=y
> > CONFIG_IKCONFIG_PROC=y
> > # CONFIG_CPUSETS is not set
> > # CONFIG_EMBEDDED is not set
> > CONFIG_KALLSYMS=y
> > # CONFIG_KALLSYMS_ALL is not set
> > # CONFIG_KALLSYMS_EXTRA_PASS is not set
> > CONFIG_PRINTK=y
> > CONFIG_BUG=y
> > CONFIG_BASE_FULL=y
> > CONFIG_FUTEX=y
> > CONFIG_EPOLL=y
> > CONFIG_SHMEM=y
> > CONFIG_CC_ALIGN_FUNCTIONS=0
> > CONFIG_CC_ALIGN_LABELS=0
> > CONFIG_CC_ALIGN_LOOPS=0
> > CONFIG_CC_ALIGN_JUMPS=0
> > # CONFIG_TINY_SHMEM is not set
> > CONFIG_BASE_SMALL=0
> >
> > #
> > # Loadable module support
> > #
> > CONFIG_MODULES=y
> > CONFIG_MODULE_UNLOAD=y
> > CONFIG_MODULE_FORCE_UNLOAD=y
> > CONFIG_OBSOLETE_MODPARM=y
> > CONFIG_MODVERSIONS=y
> > # CONFIG_MODULE_SRCVERSION_ALL is not set
> > CONFIG_KMOD=y
> > CONFIG_STOP_MACHINE=y
> >
> > #
> > # Processor type and features
> > #
> > CONFIG_X86_PC=y
> > # CONFIG_X86_ELAN is not set
> > # CONFIG_X86_VOYAGER is not set
> > # CONFIG_X86_NUMAQ is not set
> > # CONFIG_X86_SUMMIT is not set
> > # CONFIG_X86_BIGSMP is not set
> > # CONFIG_X86_VISWS is not set
> > # CONFIG_X86_GENERICARCH is not set
> > # CONFIG_X86_ES7000 is not set
> > # CONFIG_M386 is not set
> > # CONFIG_M486 is not set
> > CONFIG_M586=y
> > # CONFIG_M586TSC is not set
> > # CONFIG_M586MMX is not set
> > # CONFIG_M686 is not set
> > # CONFIG_MPENTIUMII is not set
> > # CONFIG_MPENTIUMIII is not set
> > # CONFIG_MPENTIUMM is not set
> > # CONFIG_MPENTIUM4 is not set
> > # CONFIG_MK6 is not set
> > # CONFIG_MK7 is not set
> > # CONFIG_MK8 is not set
> > # CONFIG_MCRUSOE is not set
> > # CONFIG_MEFFICEON is not set
> > # CONFIG_MWINCHIPC6 is not set
> > # CONFIG_MWINCHIP2 is not set
> > # CONFIG_MWINCHIP3D is not set
> > # CONFIG_MGEODEGX1 is not set
> > # CONFIG_MCYRIXIII is not set
> > # CONFIG_MVIAC3_2 is not set
> > CONFIG_X86_GENERIC=y
> > CONFIG_X86_CMPXCHG=y
> > CONFIG_X86_XADD=y
> > CONFIG_X86_L1_CACHE_SHIFT=7
> > CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> > CONFIG_GENERIC_CALIBRATE_DELAY=y
> > CONFIG_X86_PPRO_FENCE=y
> > CONFIG_X86_F00F_BUG=y
> > CONFIG_X86_WP_WORKS_OK=y
> > CONFIG_X86_INVLPG=y
> > CONFIG_X86_BSWAP=y
> > CONFIG_X86_POPAD_OK=y
> > CONFIG_X86_ALIGNMENT_16=y
> > CONFIG_X86_INTEL_USERCOPY=y
> > CONFIG_HPET_TIMER=y
> > CONFIG_SMP=y
> > CONFIG_NR_CPUS=8
> > CONFIG_SCHED_SMT=y
> > CONFIG_PREEMPT=y
> > CONFIG_PREEMPT_BKL=y
> > CONFIG_X86_LOCAL_APIC=y
> > CONFIG_X86_IO_APIC=y
> > # CONFIG_X86_MCE is not set
> > # CONFIG_TOSHIBA is not set
> > # CONFIG_I8K is not set
> > # CONFIG_X86_REBOOTFIXUPS is not set
> > # CONFIG_MICROCODE is not set
> > # CONFIG_X86_MSR is not set
> > # CONFIG_X86_CPUID is not set
> >
> > #
> > # Firmware Drivers
> > #
> > # CONFIG_EDD is not set
> > # CONFIG_NOHIGHMEM is not set
> > CONFIG_HIGHMEM4G=y
> > # CONFIG_HIGHMEM64G is not set
> > CONFIG_HIGHMEM=y
> > # CONFIG_HIGHPTE is not set
> > # CONFIG_MATH_EMULATION is not set
> > CONFIG_MTRR=y
> > # CONFIG_EFI is not set
> > CONFIG_IRQBALANCE=y
> > CONFIG_HAVE_DEC_LOCK=y
> > # CONFIG_REGPARM is not set
> > CONFIG_SECCOMP=y
> >
> > #
> > # Power management options (ACPI, APM)
> > #
> > CONFIG_PM=y
> > # CONFIG_PM_DEBUG is not set
> > # CONFIG_SOFTWARE_SUSPEND is not set
> >
> > #
> > # ACPI (Advanced Configuration and Power Interface) Support
> > #
> > CONFIG_ACPI=y
> > CONFIG_ACPI_BOOT=y
> > CONFIG_ACPI_INTERPRETER=y
> > # CONFIG_ACPI_SLEEP is not set
> > CONFIG_ACPI_AC=m
> > CONFIG_ACPI_BATTERY=m
> > CONFIG_ACPI_BUTTON=m
> > CONFIG_ACPI_VIDEO=m
> > CONFIG_ACPI_FAN=m
> > CONFIG_ACPI_PROCESSOR=m
> > CONFIG_ACPI_THERMAL=m
> > CONFIG_ACPI_ASUS=m
> > CONFIG_ACPI_IBM=m
> > CONFIG_ACPI_TOSHIBA=m
> > CONFIG_ACPI_BLACKLIST_YEAR=0
> > # CONFIG_ACPI_DEBUG is not set
> > CONFIG_ACPI_BUS=y
> > CONFIG_ACPI_EC=y
> > CONFIG_ACPI_POWER=y
> > CONFIG_ACPI_PCI=y
> > CONFIG_ACPI_SYSTEM=y
> > CONFIG_X86_PM_TIMER=y
> > CONFIG_ACPI_CONTAINER=m
> >
> > #
> > # APM (Advanced Power Management) BIOS Support
> > #
> > CONFIG_APM=m
> > # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> > CONFIG_APM_DO_ENABLE=y
> > # CONFIG_APM_CPU_IDLE is not set
> > # CONFIG_APM_DISPLAY_BLANK is not set
> > # CONFIG_APM_RTC_IS_GMT is not set
> > # CONFIG_APM_ALLOW_INTS is not set
> > CONFIG_APM_REAL_MODE_POWER_OFF=y
> >
> > #
> > # CPU Frequency scaling
> > #
> > CONFIG_CPU_FREQ=y
> > CONFIG_CPU_FREQ_TABLE=m
> > # CONFIG_CPU_FREQ_DEBUG is not set
> > CONFIG_CPU_FREQ_STAT=m
> > # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> > CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> > CONFIG_CPU_FREQ_GOV_USERSPACE=m
> > CONFIG_CPU_FREQ_GOV_ONDEMAND=m
> > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
> >
> > #
> > # CPUFreq processor drivers
> > #
> > CONFIG_X86_ACPI_CPUFREQ=m
> > CONFIG_X86_POWERNOW_K6=m
> > CONFIG_X86_POWERNOW_K7=m
> > CONFIG_X86_POWERNOW_K7_ACPI=y
> > CONFIG_X86_POWERNOW_K8=m
> > CONFIG_X86_POWERNOW_K8_ACPI=y
> > CONFIG_X86_GX_SUSPMOD=m
> > CONFIG_X86_SPEEDSTEP_CENTRINO=m
> > CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
> > # CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE is not set
> > CONFIG_X86_SPEEDSTEP_ICH=m
> > CONFIG_X86_SPEEDSTEP_SMI=m
> > CONFIG_X86_P4_CLOCKMOD=m
> > CONFIG_X86_CPUFREQ_NFORCE2=m
> > CONFIG_X86_LONGRUN=m
> > CONFIG_X86_LONGHAUL=m
> >
> > #
> > # shared options
> > #
> > # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
> > CONFIG_X86_SPEEDSTEP_LIB=m
> > # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
> >
> > #
> > # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> > #
> > CONFIG_PCI=y
> > # CONFIG_PCI_GOBIOS is not set
> > # CONFIG_PCI_GOMMCONFIG is not set
> > # CONFIG_PCI_GODIRECT is not set
> > CONFIG_PCI_GOANY=y
> > CONFIG_PCI_BIOS=y
> > CONFIG_PCI_DIRECT=y
> > CONFIG_PCI_MMCONFIG=y
> > # CONFIG_PCIEPORTBUS is not set
> > # CONFIG_PCI_MSI is not set
> > # CONFIG_PCI_LEGACY_PROC is not set
> > CONFIG_PCI_NAMES=y
> > CONFIG_PCI_DEBUG=y
> > CONFIG_ISA_DMA_API=y
> > CONFIG_ISA=y
> > CONFIG_EISA=y
> > CONFIG_EISA_VLB_PRIMING=y
> > CONFIG_EISA_PCI_EISA=y
> > CONFIG_EISA_VIRTUAL_ROOT=y
> > # CONFIG_EISA_NAMES is not set
> > # CONFIG_MCA is not set
> > # CONFIG_SCx200 is not set
> >
> > #
> > # PCCARD (PCMCIA/CardBus) support
> > #
> > CONFIG_PCCARD=m
> > CONFIG_PCMCIA_DEBUG=y
> > CONFIG_PCMCIA=m
> > CONFIG_CARDBUS=y
> >
> > #
> > # PC-card bridges
> > #
> > CONFIG_YENTA=m
> > # CONFIG_PD6729 is not set
> > # CONFIG_I82092 is not set
> > # CONFIG_I82365 is not set
> > # CONFIG_TCIC is not set
> > CONFIG_PCMCIA_PROBE=y
> > CONFIG_PCCARD_NONSTATIC=m
> >
> > #
> > # PCI Hotplug Support
> > #
> > # CONFIG_HOTPLUG_PCI is not set
> >
> > #
> > # Executable file formats
> > #
> > CONFIG_BINFMT_ELF=y
> > # CONFIG_BINFMT_AOUT is not set
> > # CONFIG_BINFMT_MISC is not set
> >
> > #
> > # Device Drivers
> > #
> >
> > #
> > # Generic Driver Options
> > #
> > CONFIG_STANDALONE=y
> > CONFIG_PREVENT_FIRMWARE_BUILD=y
> > CONFIG_FW_LOADER=m
> > # CONFIG_DEBUG_DRIVER is not set
> >
> > #
> > # Memory Technology Devices (MTD)
> > #
> > # CONFIG_MTD is not set
> >
> > #
> > # Parallel port support
> > #
> > CONFIG_PARPORT=m
> > CONFIG_PARPORT_PC=m
> > CONFIG_PARPORT_SERIAL=m
> > CONFIG_PARPORT_PC_FIFO=y
> > CONFIG_PARPORT_PC_SUPERIO=y
> > CONFIG_PARPORT_PC_PCMCIA=m
> > # CONFIG_PARPORT_GSC is not set
> > # CONFIG_PARPORT_1284 is not set
> >
> > #
> > # Plug and Play support
> > #
> > CONFIG_PNP=y
> > # CONFIG_PNP_DEBUG is not set
> >
> > #
> > # Protocols
> > #
> > CONFIG_ISAPNP=y
> > # CONFIG_PNPBIOS is not set
> > CONFIG_PNPACPI=y
> >
> > #
> > # Block devices
> > #
> > CONFIG_BLK_DEV_FD=m
> > # CONFIG_BLK_DEV_XD is not set
> > # CONFIG_PARIDE is not set
> > # CONFIG_BLK_CPQ_DA is not set
> > # CONFIG_BLK_CPQ_CISS_DA is not set
> > # CONFIG_BLK_DEV_DAC960 is not set
> > # CONFIG_BLK_DEV_UMEM is not set
> > # CONFIG_BLK_DEV_COW_COMMON is not set
> > CONFIG_BLK_DEV_LOOP=m
> > # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> > CONFIG_BLK_DEV_NBD=m
> > # CONFIG_BLK_DEV_SX8 is not set
> > # CONFIG_BLK_DEV_UB is not set
> > CONFIG_BLK_DEV_RAM=y
> > CONFIG_BLK_DEV_RAM_COUNT=16
> > CONFIG_BLK_DEV_RAM_SIZE=8192
> > CONFIG_BLK_DEV_INITRD=y
> > CONFIG_INITRAMFS_SOURCE=""
> > CONFIG_LBD=y
> > # CONFIG_CDROM_PKTCDVD is not set
> >
> > #
> > # IO Schedulers
> > #
> > CONFIG_IOSCHED_NOOP=y
> > CONFIG_IOSCHED_AS=m
> > CONFIG_IOSCHED_DEADLINE=y
> > CONFIG_IOSCHED_CFQ=m
> > # CONFIG_ATA_OVER_ETH is not set
> >
> > #
> > # ATA/ATAPI/MFM/RLL support
> > #
> > CONFIG_IDE=y
> > CONFIG_BLK_DEV_IDE=y
> >
> > #
> > # Please see Documentation/ide.txt for help/info on IDE drives
> > #
> > # CONFIG_BLK_DEV_IDE_SATA is not set
> > # CONFIG_BLK_DEV_HD_IDE is not set
> > CONFIG_BLK_DEV_IDEDISK=y
> > CONFIG_IDEDISK_MULTI_MODE=y
> > # CONFIG_BLK_DEV_IDECS is not set
> > CONFIG_BLK_DEV_IDECD=y
> > # CONFIG_BLK_DEV_IDETAPE is not set
> > CONFIG_BLK_DEV_IDEFLOPPY=m
> > # CONFIG_BLK_DEV_IDESCSI is not set
> > # CONFIG_IDE_TASK_IOCTL is not set
> >
> > #
> > # IDE chipset support/bugfixes
> > #
> > CONFIG_IDE_GENERIC=y
> > CONFIG_BLK_DEV_CMD640=y
> > CONFIG_BLK_DEV_CMD640_ENHANCED=y
> > CONFIG_BLK_DEV_IDEPNP=y
> > CONFIG_BLK_DEV_IDEPCI=y
> > CONFIG_IDEPCI_SHARE_IRQ=y
> > # CONFIG_BLK_DEV_OFFBOARD is not set
> > CONFIG_BLK_DEV_GENERIC=y
> > # CONFIG_BLK_DEV_OPTI621 is not set
> > # CONFIG_BLK_DEV_RZ1000 is not set
> > CONFIG_BLK_DEV_IDEDMA_PCI=y
> > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> > CONFIG_IDEDMA_PCI_AUTO=y
> > # CONFIG_IDEDMA_ONLYDISK is not set
> > CONFIG_BLK_DEV_AEC62XX=m
> > # CONFIG_BLK_DEV_ALI15X3 is not set
> > CONFIG_BLK_DEV_AMD74XX=m
> > CONFIG_BLK_DEV_ATIIXP=m
> > CONFIG_BLK_DEV_CMD64X=m
> > # CONFIG_BLK_DEV_TRIFLEX is not set
> > # CONFIG_BLK_DEV_CY82C693 is not set
> > # CONFIG_BLK_DEV_CS5520 is not set
> > # CONFIG_BLK_DEV_CS5530 is not set
> > # CONFIG_BLK_DEV_HPT34X is not set
> > # CONFIG_BLK_DEV_HPT366 is not set
> > CONFIG_BLK_DEV_SC1200=m
> > CONFIG_BLK_DEV_PIIX=m
> > # CONFIG_BLK_DEV_IT821X is not set
> > # CONFIG_BLK_DEV_NS87415 is not set
> > # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> > # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> > # CONFIG_BLK_DEV_SVWKS is not set
> > # CONFIG_BLK_DEV_SIIMAGE is not set
> > CONFIG_BLK_DEV_SIS5513=m
> > CONFIG_BLK_DEV_SLC90E66=m
> > # CONFIG_BLK_DEV_TRM290 is not set
> > CONFIG_BLK_DEV_VIA82CXXX=m
> > # CONFIG_IDE_ARM is not set
> > CONFIG_IDE_CHIPSETS=y
> >
> > #
> > # Note: most of these also require special kernel boot parameters
> > #
> > # CONFIG_BLK_DEV_4DRIVES is not set
> > # CONFIG_BLK_DEV_ALI14XX is not set
> > # CONFIG_BLK_DEV_DTC2278 is not set
> > # CONFIG_BLK_DEV_HT6560B is not set
> > # CONFIG_BLK_DEV_QD65XX is not set
> > # CONFIG_BLK_DEV_UMC8672 is not set
> > CONFIG_BLK_DEV_IDEDMA=y
> > # CONFIG_IDEDMA_IVB is not set
> > CONFIG_IDEDMA_AUTO=y
> > # CONFIG_BLK_DEV_HD is not set
> >
> > #
> > # SCSI device support
> > #
> > CONFIG_SCSI=m
> > CONFIG_SCSI_PROC_FS=y
> >
> > #
> > # SCSI support type (disk, tape, CD-ROM)
> > #
> > # CONFIG_BLK_DEV_SD is not set
> > # CONFIG_CHR_DEV_ST is not set
> > # CONFIG_CHR_DEV_OSST is not set
> > # CONFIG_BLK_DEV_SR is not set
> > # CONFIG_CHR_DEV_SG is not set
> >
> > #
> > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> > #
> > # CONFIG_SCSI_MULTI_LUN is not set
> > # CONFIG_SCSI_CONSTANTS is not set
> > # CONFIG_SCSI_LOGGING is not set
> >
> > #
> > # SCSI Transport Attributes
> > #
> > # CONFIG_SCSI_SPI_ATTRS is not set
> > # CONFIG_SCSI_FC_ATTRS is not set
> > # CONFIG_SCSI_ISCSI_ATTRS is not set
> >
> > #
> > # SCSI low-level drivers
> > #
> > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> > # CONFIG_SCSI_3W_9XXX is not set
> > # CONFIG_SCSI_7000FASST is not set
> > # CONFIG_SCSI_ACARD is not set
> > # CONFIG_SCSI_AHA152X is not set
> > # CONFIG_SCSI_AHA1542 is not set
> > # CONFIG_SCSI_AHA1740 is not set
> > # CONFIG_SCSI_AACRAID is not set
> > # CONFIG_SCSI_AIC7XXX is not set
> > # CONFIG_SCSI_AIC7XXX_OLD is not set
> > # CONFIG_SCSI_AIC79XX is not set
> > # CONFIG_SCSI_DPT_I2O is not set
> > # CONFIG_SCSI_IN2000 is not set
> > # CONFIG_MEGARAID_NEWGEN is not set
> > # CONFIG_MEGARAID_LEGACY is not set
> > # CONFIG_SCSI_SATA is not set
> > # CONFIG_SCSI_BUSLOGIC is not set
> > # CONFIG_SCSI_DMX3191D is not set
> > # CONFIG_SCSI_DTC3280 is not set
> > # CONFIG_SCSI_EATA is not set
> > # CONFIG_SCSI_FUTURE_DOMAIN is not set
> > # CONFIG_SCSI_GDTH is not set
> > # CONFIG_SCSI_GENERIC_NCR5380 is not set
> > # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
> > # CONFIG_SCSI_IPS is not set
> > # CONFIG_SCSI_INITIO is not set
> > # CONFIG_SCSI_INIA100 is not set
> > # CONFIG_SCSI_PPA is not set
> > # CONFIG_SCSI_IMM is not set
> > # CONFIG_SCSI_NCR53C406A is not set
> > # CONFIG_SCSI_SYM53C8XX_2 is not set
> > # CONFIG_SCSI_IPR is not set
> > # CONFIG_SCSI_PAS16 is not set
> > # CONFIG_SCSI_PSI240I is not set
> > # CONFIG_SCSI_QLOGIC_FAS is not set
> > # CONFIG_SCSI_QLOGIC_FC is not set
> > # CONFIG_SCSI_QLOGIC_1280 is not set
> > CONFIG_SCSI_QLA2XXX=m
> > # CONFIG_SCSI_QLA21XX is not set
> > # CONFIG_SCSI_QLA22XX is not set
> > # CONFIG_SCSI_QLA2300 is not set
> > # CONFIG_SCSI_QLA2322 is not set
> > # CONFIG_SCSI_QLA6312 is not set
> > # CONFIG_SCSI_LPFC is not set
> > # CONFIG_SCSI_SIM710 is not set
> > # CONFIG_SCSI_SYM53C416 is not set
> > # CONFIG_SCSI_DC395x is not set
> > # CONFIG_SCSI_DC390T is not set
> > # CONFIG_SCSI_T128 is not set
> > # CONFIG_SCSI_U14_34F is not set
> > # CONFIG_SCSI_ULTRASTOR is not set
> > # CONFIG_SCSI_NSP32 is not set
> > # CONFIG_SCSI_DEBUG is not set
> >
> > #
> > # PCMCIA SCSI adapter support
> > #
> > # CONFIG_PCMCIA_AHA152X is not set
> > # CONFIG_PCMCIA_FDOMAIN is not set
> > # CONFIG_PCMCIA_NINJA_SCSI is not set
> > # CONFIG_PCMCIA_QLOGIC is not set
> > # CONFIG_PCMCIA_SYM53C500 is not set
> >
> > #
> > # Old CD-ROM drivers (not SCSI, not IDE)
> > #
> > # CONFIG_CD_NO_IDESCSI is not set
> >
> > #
> > # Multi-device support (RAID and LVM)
> > #
> > # CONFIG_MD is not set
> >
> > #
> > # Fusion MPT device support
> > #
> > # CONFIG_FUSION is not set
> >
> > #
> > # IEEE 1394 (FireWire) support
> > #
> > # CONFIG_IEEE1394 is not set
> >
> > #
> > # I2O device support
> > #
> > # CONFIG_I2O is not set
> >
> > #
> > # Networking support
> > #
> > CONFIG_NET=y
> >
> > #
> > # Networking options
> > #
> > CONFIG_PACKET=y
> > # CONFIG_PACKET_MMAP is not set
> > CONFIG_UNIX=y
> > # CONFIG_NET_KEY is not set
> > CONFIG_INET=y
> > # CONFIG_IP_MULTICAST is not set
> > # CONFIG_IP_ADVANCED_ROUTER is not set
> > # CONFIG_IP_PNP is not set
> > # CONFIG_NET_IPIP is not set
> > # CONFIG_NET_IPGRE is not set
> > # CONFIG_ARPD is not set
> > # CONFIG_SYN_COOKIES is not set
> > # CONFIG_INET_AH is not set
> > # CONFIG_INET_ESP is not set
> > # CONFIG_INET_IPCOMP is not set
> > # CONFIG_INET_TUNNEL is not set
> > CONFIG_IP_TCPDIAG=y
> > # CONFIG_IP_TCPDIAG_IPV6 is not set
> > CONFIG_IPV6=m
> > CONFIG_IPV6_PRIVACY=y
> > CONFIG_INET6_AH=m
> > CONFIG_INET6_ESP=m
> > CONFIG_INET6_IPCOMP=m
> > CONFIG_INET6_TUNNEL=m
> > CONFIG_IPV6_TUNNEL=m
> > # CONFIG_NETFILTER is not set
> > CONFIG_XFRM=y
> > # CONFIG_XFRM_USER is not set
> >
> > #
> > # SCTP Configuration (EXPERIMENTAL)
> > #
> > # CONFIG_IP_SCTP is not set
> > CONFIG_ATM=m
> > # CONFIG_ATM_CLIP is not set
> > # CONFIG_ATM_LANE is not set
> > # CONFIG_ATM_BR2684 is not set
> > # CONFIG_BRIDGE is not set
> > CONFIG_VLAN_8021Q=m
> > # CONFIG_DECNET is not set
> > # CONFIG_LLC2 is not set
> > # CONFIG_IPX is not set
> > # CONFIG_ATALK is not set
> > # CONFIG_X25 is not set
> > # CONFIG_LAPB is not set
> > # CONFIG_NET_DIVERT is not set
> > # CONFIG_ECONET is not set
> > # CONFIG_WAN_ROUTER is not set
> >
> > #
> > # QoS and/or fair queueing
> > #
> > # CONFIG_NET_SCHED is not set
> > # CONFIG_NET_CLS_ROUTE is not set
> >
> > #
> > # Network testing
> > #
> > # CONFIG_NET_PKTGEN is not set
> > # CONFIG_NETPOLL is not set
> > # CONFIG_NET_POLL_CONTROLLER is not set
> > # CONFIG_HAMRADIO is not set
> > # CONFIG_IRDA is not set
> > # CONFIG_BT is not set
> > CONFIG_NETDEVICES=y
> > CONFIG_DUMMY=m
> > # CONFIG_BONDING is not set
> > # CONFIG_EQUALIZER is not set
> > CONFIG_TUN=m
> > # CONFIG_NET_SB1000 is not set
> >
> > #
> > # ARCnet devices
> > #
> > # CONFIG_ARCNET is not set
> >
> > #
> > # Ethernet (10 or 100Mbit)
> > #
> > CONFIG_NET_ETHERNET=y
> > CONFIG_MII=m
> > # CONFIG_HAPPYMEAL is not set
> > # CONFIG_SUNGEM is not set
> > # CONFIG_NET_VENDOR_3COM is not set
> > # CONFIG_LANCE is not set
> > # CONFIG_NET_VENDOR_SMC is not set
> > # CONFIG_NET_VENDOR_RACAL is not set
> >
> > #
> > # Tulip family network device support
> > #
> > CONFIG_NET_TULIP=y
> > # CONFIG_DE2104X is not set
> > # CONFIG_TULIP is not set
> > # CONFIG_DE4X5 is not set
> > # CONFIG_WINBOND_840 is not set
> > # CONFIG_DM9102 is not set
> > CONFIG_PCMCIA_XIRCOM=m
> > # CONFIG_AT1700 is not set
> > # CONFIG_DEPCA is not set
> > # CONFIG_HP100 is not set
> > # CONFIG_NET_ISA is not set
> > # CONFIG_NET_PCI is not set
> > # CONFIG_NET_POCKET is not set
> >
> > #
> > # Ethernet (1000 Mbit)
> > #
> > # CONFIG_ACENIC is not set
> > # CONFIG_DL2K is not set
> > # CONFIG_E1000 is not set
> > # CONFIG_NS83820 is not set
> > # CONFIG_HAMACHI is not set
> > # CONFIG_YELLOWFIN is not set
> > # CONFIG_R8169 is not set
> > # CONFIG_SKGE is not set
> > # CONFIG_SK98LIN is not set
> > # CONFIG_TIGON3 is not set
> > # CONFIG_BNX2 is not set
> >
> > #
> > # Ethernet (10000 Mbit)
> > #
> > # CONFIG_IXGB is not set
> > # CONFIG_S2IO is not set
> >
> > #
> > # Token Ring devices
> > #
> > # CONFIG_TR is not set
> >
> > #
> > # Wireless LAN (non-hamradio)
> > #
> > CONFIG_NET_RADIO=y
> >
> > #
> > # Obsolete Wireless cards support (pre-802.11)
> > #
> > CONFIG_STRIP=m
> > CONFIG_ARLAN=m
> > CONFIG_WAVELAN=m
> > CONFIG_PCMCIA_WAVELAN=m
> > CONFIG_PCMCIA_NETWAVE=m
> >
> > #
> > # Wireless 802.11 Frequency Hopping cards support
> > #
> > CONFIG_PCMCIA_RAYCS=m
> >
> > #
> > # Wireless 802.11b ISA/PCI cards support
> > #
> > CONFIG_AIRO=m
> > CONFIG_HERMES=m
> > CONFIG_PLX_HERMES=m
> > CONFIG_TMD_HERMES=m
> > CONFIG_PCI_HERMES=m
> > CONFIG_ATMEL=m
> > CONFIG_PCI_ATMEL=m
> >
> > #
> > # Wireless 802.11b Pcmcia/Cardbus cards support
> > #
> > CONFIG_PCMCIA_HERMES=m
> > CONFIG_AIRO_CS=m
> > CONFIG_PCMCIA_ATMEL=m
> > CONFIG_PCMCIA_WL3501=m
> >
> > #
> > # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
> > #
> > CONFIG_PRISM54=m
> > CONFIG_NET_WIRELESS=y
> >
> > #
> > # PCMCIA network device support
> > #
> > CONFIG_NET_PCMCIA=y
> > CONFIG_PCMCIA_3C589=m
> > CONFIG_PCMCIA_3C574=m
> > CONFIG_PCMCIA_FMVJ18X=m
> > CONFIG_PCMCIA_PCNET=m
> > CONFIG_PCMCIA_NMCLAN=m
> > CONFIG_PCMCIA_SMC91C92=m
> > CONFIG_PCMCIA_XIRC2PS=m
> > CONFIG_PCMCIA_AXNET=m
> >
> > #
> > # Wan interfaces
> > #
> > CONFIG_WAN=y
> > CONFIG_HOSTESS_SV11=m
> > CONFIG_COSA=m
> > CONFIG_DSCC4=m
> > CONFIG_DSCC4_PCISYNC=y
> > CONFIG_DSCC4_PCI_RST=y
> > CONFIG_LANMEDIA=m
> > CONFIG_SEALEVEL_4021=m
> > CONFIG_SYNCLINK_SYNCPPP=m
> > CONFIG_HDLC=m
> > CONFIG_HDLC_RAW=y
> > CONFIG_HDLC_RAW_ETH=y
> > CONFIG_HDLC_CISCO=y
> > CONFIG_HDLC_FR=y
> > CONFIG_HDLC_PPP=y
> >
> > #
> > # X.25/LAPB support is disabled
> > #
> > CONFIG_PCI200SYN=m
> > CONFIG_WANXL=m
> > CONFIG_PC300=m
> > CONFIG_PC300_MLPPP=y
> > CONFIG_N2=m
> > CONFIG_C101=m
> > CONFIG_FARSYNC=m
> > CONFIG_DLCI=m
> > CONFIG_DLCI_COUNT=24
> > CONFIG_DLCI_MAX=8
> > CONFIG_SDLA=m
> > CONFIG_SBNI=m
> > CONFIG_SBNI_MULTILINE=y
> >
> > #
> > # ATM drivers
> > #
> > # CONFIG_ATM_TCP is not set
> > # CONFIG_ATM_LANAI is not set
> > # CONFIG_ATM_ENI is not set
> > # CONFIG_ATM_FIRESTREAM is not set
> > # CONFIG_ATM_ZATM is not set
> > # CONFIG_ATM_NICSTAR is not set
> > # CONFIG_ATM_IDT77252 is not set
> > # CONFIG_ATM_AMBASSADOR is not set
> > # CONFIG_ATM_HORIZON is not set
> > # CONFIG_ATM_IA is not set
> > # CONFIG_ATM_FORE200E_MAYBE is not set
> > # CONFIG_ATM_HE is not set
> > # CONFIG_FDDI is not set
> > # CONFIG_HIPPI is not set
> > # CONFIG_PLIP is not set
> > CONFIG_PPP=m
> > CONFIG_PPP_MULTILINK=y
> > CONFIG_PPP_FILTER=y
> > CONFIG_PPP_ASYNC=m
> > CONFIG_PPP_SYNC_TTY=m
> > CONFIG_PPP_DEFLATE=m
> > CONFIG_PPP_BSDCOMP=m
> > CONFIG_PPPOE=m
> > CONFIG_PPPOATM=m
> > # CONFIG_SLIP is not set
> > # CONFIG_NET_FC is not set
> > # CONFIG_SHAPER is not set
> > # CONFIG_NETCONSOLE is not set
> >
> > #
> > # ISDN subsystem
> > #
> > # CONFIG_ISDN is not set
> >
> > #
> > # Telephony Support
> > #
> > # CONFIG_PHONE is not set
> >
> > #
> > # Input device support
> > #
> > CONFIG_INPUT=y
> >
> > #
> > # Userland interfaces
> > #
> > CONFIG_INPUT_MOUSEDEV=y
> > CONFIG_INPUT_MOUSEDEV_PSAUX=y
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > CONFIG_INPUT_JOYDEV=m
> > # CONFIG_INPUT_TSDEV is not set
> > CONFIG_INPUT_EVDEV=y
> > # CONFIG_INPUT_EVBUG is not set
> >
> > #
> > # Input Device Drivers
> > #
> > CONFIG_INPUT_KEYBOARD=y
> > CONFIG_KEYBOARD_ATKBD=y
> > CONFIG_KEYBOARD_SUNKBD=m
> > CONFIG_KEYBOARD_LKKBD=m
> > CONFIG_KEYBOARD_XTKBD=m
> > CONFIG_KEYBOARD_NEWTON=m
> > CONFIG_INPUT_MOUSE=y
> > CONFIG_MOUSE_PS2=y
> > CONFIG_MOUSE_SERIAL=m
> > CONFIG_MOUSE_INPORT=m
> > CONFIG_MOUSE_ATIXL=y
> > CONFIG_MOUSE_LOGIBM=m
> > CONFIG_MOUSE_PC110PAD=m
> > # CONFIG_MOUSE_VSXXXAA is not set
> > CONFIG_INPUT_JOYSTICK=y
> > CONFIG_JOYSTICK_ANALOG=m
> > CONFIG_JOYSTICK_A3D=m
> > CONFIG_JOYSTICK_ADI=m
> > CONFIG_JOYSTICK_COBRA=m
> > CONFIG_JOYSTICK_GF2K=m
> > CONFIG_JOYSTICK_GRIP=m
> > CONFIG_JOYSTICK_GRIP_MP=m
> > CONFIG_JOYSTICK_GUILLEMOT=m
> > CONFIG_JOYSTICK_INTERACT=m
> > CONFIG_JOYSTICK_SIDEWINDER=m
> > CONFIG_JOYSTICK_TMDC=m
> > CONFIG_JOYSTICK_IFORCE=m
> > CONFIG_JOYSTICK_IFORCE_USB=y
> > CONFIG_JOYSTICK_IFORCE_232=y
> > CONFIG_JOYSTICK_WARRIOR=m
> > CONFIG_JOYSTICK_MAGELLAN=m
> > CONFIG_JOYSTICK_SPACEORB=m
> > CONFIG_JOYSTICK_SPACEBALL=m
> > CONFIG_JOYSTICK_STINGER=m
> > CONFIG_JOYSTICK_TWIDJOY=m
> > CONFIG_JOYSTICK_DB9=m
> > CONFIG_JOYSTICK_GAMECON=m
> > CONFIG_JOYSTICK_TURBOGRAFX=m
> > # CONFIG_JOYSTICK_JOYDUMP is not set
> > # CONFIG_INPUT_TOUCHSCREEN is not set
> > CONFIG_INPUT_MISC=y
> > CONFIG_INPUT_PCSPKR=m
> > # CONFIG_INPUT_UINPUT is not set
> >
> > #
> > # Hardware I/O ports
> > #
> > CONFIG_SERIO=y
> > CONFIG_SERIO_I8042=y
> > CONFIG_SERIO_SERPORT=m
> > CONFIG_SERIO_CT82C710=m
> > CONFIG_SERIO_PARKBD=m
> > CONFIG_SERIO_PCIPS2=m
> > CONFIG_SERIO_LIBPS2=y
> > # CONFIG_SERIO_RAW is not set
> > CONFIG_GAMEPORT=m
> > CONFIG_GAMEPORT_NS558=m
> > CONFIG_GAMEPORT_L4=m
> > CONFIG_GAMEPORT_EMU10K1=m
> > CONFIG_GAMEPORT_VORTEX=m
> > CONFIG_GAMEPORT_FM801=m
> > CONFIG_GAMEPORT_CS461X=m
> >
> > #
> > # Character devices
> > #
> > CONFIG_VT=y
> > CONFIG_VT_CONSOLE=y
> > CONFIG_HW_CONSOLE=y
> > # CONFIG_SERIAL_NONSTANDARD is not set
> >
> > #
> > # Serial drivers
> > #
> > CONFIG_SERIAL_8250=y
> > CONFIG_SERIAL_8250_CONSOLE=y
> > CONFIG_SERIAL_8250_CS=m
> > CONFIG_SERIAL_8250_ACPI=y
> > CONFIG_SERIAL_8250_NR_UARTS=4
> > CONFIG_SERIAL_8250_EXTENDED=y
> > CONFIG_SERIAL_8250_MANY_PORTS=y
> > CONFIG_SERIAL_8250_SHARE_IRQ=y
> > # CONFIG_SERIAL_8250_DETECT_IRQ is not set
> > CONFIG_SERIAL_8250_MULTIPORT=y
> > CONFIG_SERIAL_8250_RSA=y
> >
> > #
> > # Non-8250 serial port support
> > #
> > CONFIG_SERIAL_CORE=y
> > CONFIG_SERIAL_CORE_CONSOLE=y
> > # CONFIG_SERIAL_JSM is not set
> > CONFIG_UNIX98_PTYS=y
> > # CONFIG_LEGACY_PTYS is not set
> > # CONFIG_PRINTER is not set
> > CONFIG_PPDEV=m
> > # CONFIG_TIPAR is not set
> >
> > #
> > # IPMI
> > #
> > # CONFIG_IPMI_HANDLER is not set
> >
> > #
> > # Watchdog Cards
> > #
> > # CONFIG_WATCHDOG is not set
> > # CONFIG_HW_RANDOM is not set
> > CONFIG_NVRAM=m
> > CONFIG_RTC=m
> > # CONFIG_GEN_RTC is not set
> > CONFIG_DTLK=y
> > # CONFIG_R3964 is not set
> > # CONFIG_APPLICOM is not set
> > CONFIG_SONYPI=y
> >
> > #
> > # Ftape, the floppy tape device driver
> > #
> > CONFIG_AGP=m
> > # CONFIG_AGP_ALI is not set
> > # CONFIG_AGP_ATI is not set
> > # CONFIG_AGP_AMD is not set
> > # CONFIG_AGP_AMD64 is not set
> > # CONFIG_AGP_INTEL is not set
> > # CONFIG_AGP_NVIDIA is not set
> > # CONFIG_AGP_SIS is not set
> > # CONFIG_AGP_SWORKS is not set
> > # CONFIG_AGP_VIA is not set
> > # CONFIG_AGP_EFFICEON is not set
> > # CONFIG_DRM is not set
> >
> > #
> > # PCMCIA character devices
> > #
> > # CONFIG_SYNCLINK_CS is not set
> > CONFIG_MWAVE=m
> > # CONFIG_RAW_DRIVER is not set
> > CONFIG_HPET=y
> > CONFIG_HPET_RTC_IRQ=y
> > CONFIG_HPET_MMAP=y
> > # CONFIG_HANGCHECK_TIMER is not set
> >
> > #
> > # TPM devices
> > #
> > # CONFIG_TCG_TPM is not set
> >
> > #
> > # I2C support
> > #
> > # CONFIG_I2C is not set
> >
> > #
> > # Dallas's 1-wire bus
> > #
> > # CONFIG_W1 is not set
> >
> > #
> > # Misc devices
> > #
> > # CONFIG_IBM_ASM is not set
> >
> > #
> > # Multimedia devices
> > #
> > # CONFIG_VIDEO_DEV is not set
> >
> > #
> > # Digital Video Broadcasting Devices
> > #
> > # CONFIG_DVB is not set
> >
> > #
> > # Graphics support
> > #
> > CONFIG_FB=y
> > CONFIG_FB_CFB_FILLRECT=y
> > CONFIG_FB_CFB_COPYAREA=y
> > CONFIG_FB_CFB_IMAGEBLIT=y
> > CONFIG_FB_SOFT_CURSOR=y
> > # CONFIG_FB_MACMODES is not set
> > CONFIG_FB_MODE_HELPERS=y
> > # CONFIG_FB_TILEBLITTING is not set
> > # CONFIG_FB_CIRRUS is not set
> > # CONFIG_FB_PM2 is not set
> > # CONFIG_FB_CYBER2000 is not set
> > # CONFIG_FB_ASILIANT is not set
> > # CONFIG_FB_IMSTT is not set
> > # CONFIG_FB_VGA16 is not set
> > CONFIG_FB_VESA=y
> > CONFIG_FB_VESA_STD=y
> > # CONFIG_FB_VESA_TNG is not set
> > CONFIG_VIDEO_SELECT=y
> > # CONFIG_FB_HGA is not set
> > # CONFIG_FB_NVIDIA is not set
> > # CONFIG_FB_RIVA is not set
> > # CONFIG_FB_I810 is not set
> > # CONFIG_FB_INTEL is not set
> > # CONFIG_FB_MATROX is not set
> > # CONFIG_FB_RADEON_OLD is not set
> > # CONFIG_FB_RADEON is not set
> > # CONFIG_FB_ATY128 is not set
> > # CONFIG_FB_ATY is not set
> > # CONFIG_FB_SAVAGE is not set
> > # CONFIG_FB_SIS is not set
> > CONFIG_FB_NEOMAGIC=m
> > # CONFIG_FB_KYRO is not set
> > # CONFIG_FB_3DFX is not set
> > # CONFIG_FB_VOODOO1 is not set
> > # CONFIG_FB_TRIDENT is not set
> > # CONFIG_FB_GEODE is not set
> > # CONFIG_FB_S1D13XXX is not set
> > # CONFIG_FB_VIRTUAL is not set
> >
> > #
> > # Console display driver support
> > #
> > CONFIG_VGA_CONSOLE=y
> > # CONFIG_MDA_CONSOLE is not set
> > CONFIG_DUMMY_CONSOLE=y
> > CONFIG_FRAMEBUFFER_CONSOLE=y
> > # CONFIG_FONTS is not set
> > CONFIG_FONT_8x8=y
> > CONFIG_FONT_8x16=y
> >
> > #
> > # Logo configuration
> > #
> > CONFIG_LOGO=y
> > CONFIG_LOGO_LINUX_MONO=y
> > CONFIG_LOGO_LINUX_VGA16=y
> > CONFIG_LOGO_LINUX_CLUT224=y
> > CONFIG_BACKLIGHT_LCD_SUPPORT=y
> > CONFIG_BACKLIGHT_CLASS_DEVICE=m
> > CONFIG_BACKLIGHT_DEVICE=y
> > CONFIG_LCD_CLASS_DEVICE=m
> > CONFIG_LCD_DEVICE=y
> > # CONFIG_FB_SPLASH is not set
> >
> > #
> > # Speakup console speech
> > #
> > # CONFIG_SPEAKUP is not set
> > CONFIG_SPEAKUP_DEFAULT="none"
> >
> > #
> > # Sound
> > #
> > CONFIG_SOUND=y
> >
> > #
> > # Advanced Linux Sound Architecture
> > #
> > CONFIG_SND=m
> > CONFIG_SND_TIMER=m
> > CONFIG_SND_PCM=m
> > CONFIG_SND_HWDEP=m
> > CONFIG_SND_RAWMIDI=m
> > CONFIG_SND_SEQUENCER=m
> > # CONFIG_SND_SEQ_DUMMY is not set
> > CONFIG_SND_OSSEMUL=y
> > CONFIG_SND_MIXER_OSS=m
> > CONFIG_SND_PCM_OSS=m
> > # CONFIG_SND_SEQUENCER_OSS is not set
> > CONFIG_SND_RTCTIMER=m
> > # CONFIG_SND_VERBOSE_PRINTK is not set
> > # CONFIG_SND_DEBUG is not set
> >
> > #
> > # Generic devices
> > #
> > CONFIG_SND_OPL3_LIB=m
> > # CONFIG_SND_DUMMY is not set
> > # CONFIG_SND_VIRMIDI is not set
> > # CONFIG_SND_MTPAV is not set
> > # CONFIG_SND_SERIAL_U16550 is not set
> > # CONFIG_SND_MPU401 is not set
> >
> > #
> > # ISA devices
> > #
> > # CONFIG_SND_AD1816A is not set
> > # CONFIG_SND_AD1848 is not set
> > # CONFIG_SND_CS4231 is not set
> > # CONFIG_SND_CS4232 is not set
> > # CONFIG_SND_CS4236 is not set
> > # CONFIG_SND_ES968 is not set
> > # CONFIG_SND_ES1688 is not set
> > # CONFIG_SND_ES18XX is not set
> > # CONFIG_SND_GUSCLASSIC is not set
> > # CONFIG_SND_GUSEXTREME is not set
> > # CONFIG_SND_GUSMAX is not set
> > # CONFIG_SND_INTERWAVE is not set
> > # CONFIG_SND_INTERWAVE_STB is not set
> > # CONFIG_SND_OPTI92X_AD1848 is not set
> > # CONFIG_SND_OPTI92X_CS4231 is not set
> > # CONFIG_SND_OPTI93X is not set
> > # CONFIG_SND_SB8 is not set
> > # CONFIG_SND_SB16 is not set
> > # CONFIG_SND_SBAWE is not set
> > # CONFIG_SND_WAVEFRONT is not set
> > # CONFIG_SND_ALS100 is not set
> > # CONFIG_SND_AZT2320 is not set
> > # CONFIG_SND_CMI8330 is not set
> > # CONFIG_SND_DT019X is not set
> > # CONFIG_SND_OPL3SA2 is not set
> > # CONFIG_SND_SGALAXY is not set
> > # CONFIG_SND_SSCAPE is not set
> >
> > #
> > # PCI devices
> > #
> > CONFIG_SND_AC97_CODEC=m
> > # CONFIG_SND_ALI5451 is not set
> > # CONFIG_SND_ATIIXP is not set
> > # CONFIG_SND_ATIIXP_MODEM is not set
> > # CONFIG_SND_AU8810 is not set
> > # CONFIG_SND_AU8820 is not set
> > # CONFIG_SND_AU8830 is not set
> > # CONFIG_SND_AZT3328 is not set
> > # CONFIG_SND_BT87X is not set
> > # CONFIG_SND_CS46XX is not set
> > CONFIG_SND_CS4281=m
> > # CONFIG_SND_EMU10K1 is not set
> > # CONFIG_SND_EMU10K1X is not set
> > # CONFIG_SND_CA0106 is not set
> > # CONFIG_SND_KORG1212 is not set
> > # CONFIG_SND_MIXART is not set
> > # CONFIG_SND_NM256 is not set
> > # CONFIG_SND_RME32 is not set
> > # CONFIG_SND_RME96 is not set
> > # CONFIG_SND_RME9652 is not set
> > # CONFIG_SND_HDSP is not set
> > # CONFIG_SND_TRIDENT is not set
> > # CONFIG_SND_YMFPCI is not set
> > # CONFIG_SND_ALS4000 is not set
> > # CONFIG_SND_CMIPCI is not set
> > # CONFIG_SND_ENS1370 is not set
> > # CONFIG_SND_ENS1371 is not set
> > # CONFIG_SND_ES1938 is not set
> > # CONFIG_SND_ES1968 is not set
> > # CONFIG_SND_MAESTRO3 is not set
> > # CONFIG_SND_FM801 is not set
> > # CONFIG_SND_ICE1712 is not set
> > # CONFIG_SND_ICE1724 is not set
> > # CONFIG_SND_INTEL8X0 is not set
> > # CONFIG_SND_INTEL8X0M is not set
> > # CONFIG_SND_SONICVIBES is not set
> > # CONFIG_SND_VIA82XX is not set
> > # CONFIG_SND_VIA82XX_MODEM is not set
> > # CONFIG_SND_VX222 is not set
> > # CONFIG_SND_HDA_INTEL is not set
> >
> > #
> > # USB devices
> > #
> > # CONFIG_SND_USB_AUDIO is not set
> > # CONFIG_SND_USB_USX2Y is not set
> >
> > #
> > # PCMCIA devices
> > #
> > # CONFIG_SND_VXPOCKET is not set
> > # CONFIG_SND_VXP440 is not set
> > # CONFIG_SND_PDAUDIOCF is not set
> >
> > #
> > # Open Sound System
> > #
> > # CONFIG_SOUND_PRIME is not set
> >
> > #
> > # USB support
> > #
> > CONFIG_USB_ARCH_HAS_HCD=y
> > CONFIG_USB_ARCH_HAS_OHCI=y
> > CONFIG_USB=m
> > CONFIG_USB_DEBUG=y
> >
> > #
> > # Miscellaneous USB options
> > #
> > CONFIG_USB_DEVICEFS=y
> > # CONFIG_USB_BANDWIDTH is not set
> > # CONFIG_USB_DYNAMIC_MINORS is not set
> > # CONFIG_USB_SUSPEND is not set
> > # CONFIG_USB_OTG is not set
> >
> > #
> > # USB Host Controller Drivers
> > #
> > CONFIG_USB_EHCI_HCD=m
> > # CONFIG_USB_EHCI_SPLIT_ISO is not set
> > # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> > # CONFIG_USB_OHCI_HCD is not set
> > CONFIG_USB_UHCI_HCD=m
> > # CONFIG_USB_SL811_HCD is not set
> >
> > #
> > # USB Device Class drivers
> > #
> > # CONFIG_USB_AUDIO is not set
> > # CONFIG_USB_BLUETOOTH_TTY is not set
> > # CONFIG_USB_MIDI is not set
> > # CONFIG_USB_ACM is not set
> > # CONFIG_USB_PRINTER is not set
> >
> > #
> > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
> > needed; see USB_STORAGE Help for more information
> > #
> > CONFIG_USB_STORAGE=m
> > CONFIG_USB_STORAGE_DEBUG=y
> > CONFIG_USB_STORAGE_DATAFAB=y
> > CONFIG_USB_STORAGE_FREECOM=y
> > CONFIG_USB_STORAGE_ISD200=y
> > CONFIG_USB_STORAGE_DPCM=y
> > CONFIG_USB_STORAGE_USBAT=y
> > CONFIG_USB_STORAGE_SDDR09=y
> > CONFIG_USB_STORAGE_SDDR55=y
> > CONFIG_USB_STORAGE_JUMPSHOT=y
> >
> > #
> > # USB Input Devices
> > #
> > # CONFIG_USB_HID is not set
> >
> > #
> > # USB HID Boot Protocol drivers
> > #
> > # CONFIG_USB_KBD is not set
> > # CONFIG_USB_MOUSE is not set
> > # CONFIG_USB_AIPTEK is not set
> > # CONFIG_USB_WACOM is not set
> > # CONFIG_USB_KBTAB is not set
> > # CONFIG_USB_POWERMATE is not set
> > # CONFIG_USB_MTOUCH is not set
> > # CONFIG_USB_EGALAX is not set
> > # CONFIG_USB_XPAD is not set
> > # CONFIG_USB_ATI_REMOTE is not set
> >
> > #
> > # USB Imaging devices
> > #
> > # CONFIG_USB_MDC800 is not set
> > # CONFIG_USB_MICROTEK is not set
> >
> > #
> > # USB Multimedia devices
> > #
> > # CONFIG_USB_DABUSB is not set
> >
> > #
> > # Video4Linux support is needed for USB Multimedia device support
> > #
> >
> > #
> > # USB Network Adapters
> > #
> > CONFIG_USB_CATC=m
> > CONFIG_USB_KAWETH=m
> > CONFIG_USB_PEGASUS=m
> > CONFIG_USB_RTL8150=m
> > CONFIG_USB_USBNET=m
> >
> > #
> > # USB Host-to-Host Cables
> > #
> > CONFIG_USB_ALI_M5632=y
> > CONFIG_USB_AN2720=y
> > CONFIG_USB_BELKIN=y
> > CONFIG_USB_GENESYS=y
> > CONFIG_USB_NET1080=y
> > CONFIG_USB_PL2301=y
> > CONFIG_USB_KC2190=y
> >
> > #
> > # Intelligent USB Devices/Gadgets
> > #
> > # CONFIG_USB_ARMLINUX is not set
> > # CONFIG_USB_EPSON2888 is not set
> > # CONFIG_USB_ZAURUS is not set
> > CONFIG_USB_CDCETHER=y
> >
> > #
> > # USB Network Adapters
> > #
> > CONFIG_USB_AX8817X=y
> > CONFIG_USB_ZD1201=m
> > # CONFIG_USB_MON is not set
> >
> > #
> > # USB port drivers
> > #
> > # CONFIG_USB_USS720 is not set
> >
> > #
> > # USB Serial Converter support
> > #
> > CONFIG_USB_SERIAL=m
> > CONFIG_USB_SERIAL_GENERIC=y
> > CONFIG_USB_SERIAL_AIRPRIME=m
> > CONFIG_USB_SERIAL_BELKIN=m
> > CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
> > CONFIG_USB_SERIAL_CP2101=m
> > CONFIG_USB_SERIAL_CYPRESS_M8=m
> > CONFIG_USB_SERIAL_EMPEG=m
> > CONFIG_USB_SERIAL_FTDI_SIO=m
> > CONFIG_USB_SERIAL_VISOR=m
> > CONFIG_USB_SERIAL_IPAQ=m
> > # CONFIG_USB_SERIAL_IR is not set
> > CONFIG_USB_SERIAL_EDGEPORT=m
> > CONFIG_USB_SERIAL_EDGEPORT_TI=m
> > CONFIG_USB_SERIAL_GARMIN=m
> > CONFIG_USB_SERIAL_IPW=m
> > # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
> > # CONFIG_USB_SERIAL_KEYSPAN is not set
> > # CONFIG_USB_SERIAL_KLSI is not set
> > # CONFIG_USB_SERIAL_KOBIL_SCT is not set
> > CONFIG_USB_SERIAL_MCT_U232=m
> > CONFIG_USB_SERIAL_PL2303=m
> > # CONFIG_USB_SERIAL_HP4X is not set
> > # CONFIG_USB_SERIAL_SAFE is not set
> > CONFIG_USB_SERIAL_TI=m
> > # CONFIG_USB_SERIAL_CYBERJACK is not set
> > # CONFIG_USB_SERIAL_XIRCOM is not set
> > CONFIG_USB_SERIAL_OMNINET=m
> >
> > #
> > # USB Miscellaneous drivers
> > #
> > # CONFIG_USB_EMI62 is not set
> > # CONFIG_USB_EMI26 is not set
> > # CONFIG_USB_AUERSWALD is not set
> > # CONFIG_USB_RIO500 is not set
> > # CONFIG_USB_LEGOTOWER is not set
> > # CONFIG_USB_LCD is not set
> > # CONFIG_USB_LED is not set
> > # CONFIG_USB_CYTHERM is not set
> > # CONFIG_USB_PHIDGETKIT is not set
> > # CONFIG_USB_PHIDGETSERVO is not set
> > # CONFIG_USB_IDMOUSE is not set
> > # CONFIG_USB_SISUSBVGA is not set
> > # CONFIG_USB_TEST is not set
> >
> > #
> > # USB ATM/DSL drivers
> > #
> > # CONFIG_USB_ATM is not set
> > # CONFIG_USB_SPEEDTOUCH is not set
> >
> > #
> > # USB Gadget Support
> > #
> > # CONFIG_USB_GADGET is not set
> >
> > #
> > # MMC/SD Card support
> > #
> > # CONFIG_MMC is not set
> >
> > #
> > # InfiniBand support
> > #
> > # CONFIG_INFINIBAND is not set
> >
> > #
> > # File systems
> > #
> > CONFIG_EXT2_FS=y
> > CONFIG_EXT2_FS_XATTR=y
> > CONFIG_EXT2_FS_POSIX_ACL=y
> > CONFIG_EXT2_FS_SECURITY=y
> > CONFIG_EXT3_FS=y
> > CONFIG_EXT3_FS_XATTR=y
> > CONFIG_EXT3_FS_POSIX_ACL=y
> > CONFIG_EXT3_FS_SECURITY=y
> > CONFIG_JBD=y
> > # CONFIG_JBD_DEBUG is not set
> > CONFIG_FS_MBCACHE=y
> > CONFIG_REISERFS_FS=y
> > # CONFIG_REISERFS_CHECK is not set
> > # CONFIG_REISERFS_PROC_INFO is not set
> > CONFIG_REISERFS_FS_XATTR=y
> > CONFIG_REISERFS_FS_POSIX_ACL=y
> > CONFIG_REISERFS_FS_SECURITY=y
> > CONFIG_JFS_FS=m
> > CONFIG_JFS_POSIX_ACL=y
> > # CONFIG_JFS_SECURITY is not set
> > # CONFIG_JFS_DEBUG is not set
> > # CONFIG_JFS_STATISTICS is not set
> > CONFIG_FS_POSIX_ACL=y
> >
> > #
> > # XFS support
> > #
> > CONFIG_XFS_FS=y
> > CONFIG_XFS_EXPORT=y
> > CONFIG_XFS_RT=y
> > CONFIG_XFS_QUOTA=y
> > CONFIG_XFS_SECURITY=y
> > CONFIG_XFS_POSIX_ACL=y
> > CONFIG_MINIX_FS=m
> > CONFIG_ROMFS_FS=m
> > CONFIG_INOTIFY=y
> > CONFIG_QUOTA=y
> > CONFIG_QFMT_V1=m
> > CONFIG_QFMT_V2=m
> > CONFIG_QUOTACTL=y
> > CONFIG_DNOTIFY=y
> > CONFIG_AUTOFS_FS=m
> > CONFIG_AUTOFS4_FS=m
> >
> > #
> > # CD-ROM/DVD Filesystems
> > #
> > CONFIG_ISO9660_FS=y
> > CONFIG_JOLIET=y
> > CONFIG_ZISOFS=y
> > CONFIG_ZISOFS_FS=y
> > CONFIG_UDF_FS=y
> > CONFIG_UDF_NLS=y
> >
> > #
> > # DOS/FAT/NT Filesystems
> > #
> > CONFIG_FAT_FS=y
> > CONFIG_MSDOS_FS=m
> > CONFIG_VFAT_FS=y
> > CONFIG_FAT_DEFAULT_CODEPAGE=437
> > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> > CONFIG_NTFS_FS=m
> > # CONFIG_NTFS_DEBUG is not set
> > # CONFIG_NTFS_RW is not set
> >
> > #
> > # Pseudo filesystems
> > #
> > CONFIG_PROC_FS=y
> > CONFIG_PROC_KCORE=y
> > CONFIG_SYSFS=y
> > # CONFIG_DEVFS_FS is not set
> > # CONFIG_DEVPTS_FS_XATTR is not set
> > CONFIG_TMPFS=y
> > CONFIG_TMPFS_XATTR=y
> > CONFIG_TMPFS_SECURITY=y
> > # CONFIG_HUGETLBFS is not set
> > # CONFIG_HUGETLB_PAGE is not set
> > CONFIG_RAMFS=y
> >
> > #
> > # Miscellaneous filesystems
> > #
> > # CONFIG_ADFS_FS is not set
> > # CONFIG_AFFS_FS is not set
> > # CONFIG_HFS_FS is not set
> > # CONFIG_HFSPLUS_FS is not set
> > CONFIG_BEFS_FS=m
> > # CONFIG_BEFS_DEBUG is not set
> > # CONFIG_BFS_FS is not set
> > # CONFIG_EFS_FS is not set
> > CONFIG_CRAMFS=m
> > # CONFIG_SQUASHFS is not set
> > # CONFIG_VXFS_FS is not set
> > # CONFIG_HPFS_FS is not set
> > # CONFIG_QNX4FS_FS is not set
> > # CONFIG_SYSV_FS is not set
> > # CONFIG_UFS_FS is not set
> >
> > #
> > # Network File Systems
> > #
> > CONFIG_NFS_FS=m
> > CONFIG_NFS_V3=y
> > CONFIG_NFS_V4=y
> > # CONFIG_NFS_DIRECTIO is not set
> > CONFIG_NFSD=m
> > CONFIG_NFSD_V3=y
> > CONFIG_NFSD_V4=y
> > CONFIG_NFSD_TCP=y
> > CONFIG_LOCKD=m
> > CONFIG_LOCKD_V4=y
> > CONFIG_EXPORTFS=y
> > CONFIG_SUNRPC=m
> > CONFIG_SUNRPC_GSS=m
> > CONFIG_RPCSEC_GSS_KRB5=m
> > CONFIG_RPCSEC_GSS_SPKM3=m
> > CONFIG_SMB_FS=m
> > CONFIG_SMB_NLS_DEFAULT=y
> > CONFIG_SMB_NLS_REMOTE="cp437"
> > CONFIG_CIFS=m
> > # CONFIG_CIFS_STATS is not set
> > # CONFIG_CIFS_XATTR is not set
> > # CONFIG_CIFS_EXPERIMENTAL is not set
> > CONFIG_NCP_FS=m
> > # CONFIG_NCPFS_PACKET_SIGNING is not set
> > # CONFIG_NCPFS_IOCTL_LOCKING is not set
> > # CONFIG_NCPFS_STRONG is not set
> > # CONFIG_NCPFS_NFS_NS is not set
> > # CONFIG_NCPFS_OS2_NS is not set
> > # CONFIG_NCPFS_SMALLDOS is not set
> > CONFIG_NCPFS_NLS=y
> > # CONFIG_NCPFS_EXTRAS is not set
> > CONFIG_CODA_FS=m
> > # CONFIG_CODA_FS_OLD_API is not set
> > CONFIG_AFS_FS=m
> > CONFIG_RXRPC=m
> >
> > #
> > # Partition Types
> > #
> > CONFIG_PARTITION_ADVANCED=y
> > # CONFIG_ACORN_PARTITION is not set
> > # CONFIG_OSF_PARTITION is not set
> > # CONFIG_AMIGA_PARTITION is not set
> > # CONFIG_ATARI_PARTITION is not set
> > # CONFIG_MAC_PARTITION is not set
> > CONFIG_MSDOS_PARTITION=y
> > CONFIG_BSD_DISKLABEL=y
> > CONFIG_MINIX_SUBPARTITION=y
> > CONFIG_SOLARIS_X86_PARTITION=y
> > CONFIG_UNIXWARE_DISKLABEL=y
> > CONFIG_LDM_PARTITION=y
> > # CONFIG_LDM_DEBUG is not set
> > # CONFIG_SGI_PARTITION is not set
> > # CONFIG_ULTRIX_PARTITION is not set
> > # CONFIG_SUN_PARTITION is not set
> > # CONFIG_EFI_PARTITION is not set
> >
> > #
> > # Native Language Support
> > #
> > CONFIG_NLS=y
> > CONFIG_NLS_DEFAULT="iso8859-1"
> > CONFIG_NLS_CODEPAGE_437=y
> > CONFIG_NLS_CODEPAGE_737=m
> > CONFIG_NLS_CODEPAGE_775=m
> > CONFIG_NLS_CODEPAGE_850=m
> > CONFIG_NLS_CODEPAGE_852=m
> > CONFIG_NLS_CODEPAGE_855=m
> > CONFIG_NLS_CODEPAGE_857=m
> > CONFIG_NLS_CODEPAGE_860=m
> > CONFIG_NLS_CODEPAGE_861=m
> > CONFIG_NLS_CODEPAGE_862=m
> > CONFIG_NLS_CODEPAGE_863=m
> > CONFIG_NLS_CODEPAGE_864=m
> > CONFIG_NLS_CODEPAGE_865=m
> > CONFIG_NLS_CODEPAGE_866=m
> > CONFIG_NLS_CODEPAGE_869=m
> > CONFIG_NLS_CODEPAGE_936=m
> > CONFIG_NLS_CODEPAGE_950=m
> > CONFIG_NLS_CODEPAGE_932=m
> > CONFIG_NLS_CODEPAGE_949=m
> > CONFIG_NLS_CODEPAGE_874=m
> > CONFIG_NLS_ISO8859_8=m
> > CONFIG_NLS_CODEPAGE_1250=m
> > CONFIG_NLS_CODEPAGE_1251=m
> > CONFIG_NLS_ASCII=m
> > CONFIG_NLS_ISO8859_1=y
> > CONFIG_NLS_ISO8859_2=m
> > CONFIG_NLS_ISO8859_3=m
> > CONFIG_NLS_ISO8859_4=m
> > CONFIG_NLS_ISO8859_5=m
> > CONFIG_NLS_ISO8859_6=m
> > CONFIG_NLS_ISO8859_7=m
> > CONFIG_NLS_ISO8859_9=m
> > CONFIG_NLS_ISO8859_13=m
> > CONFIG_NLS_ISO8859_14=m
> > CONFIG_NLS_ISO8859_15=m
> > CONFIG_NLS_KOI8_R=m
> > CONFIG_NLS_KOI8_U=m
> > CONFIG_NLS_UTF8=y
> >
> > #
> > # Profiling support
> > #
> > # CONFIG_PROFILING is not set
> >
> > #
> > # Kernel hacking
> > #
> > # CONFIG_PRINTK_TIME is not set
> > CONFIG_DEBUG_KERNEL=y
> > CONFIG_MAGIC_SYSRQ=y
> > CONFIG_LOG_BUF_SHIFT=15
> > # CONFIG_SCHEDSTATS is not set
> > # CONFIG_DEBUG_SLAB is not set
> > CONFIG_DEBUG_PREEMPT=y
> > # CONFIG_DEBUG_SPINLOCK is not set
> > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> > # CONFIG_DEBUG_KOBJECT is not set
> > # CONFIG_DEBUG_HIGHMEM is not set
> > CONFIG_DEBUG_BUGVERBOSE=y
> > # CONFIG_DEBUG_INFO is not set
> > # CONFIG_DEBUG_FS is not set
> > # CONFIG_FRAME_POINTER is not set
> > CONFIG_EARLY_PRINTK=y
> > # CONFIG_DEBUG_STACKOVERFLOW is not set
> > # CONFIG_KPROBES is not set
> > # CONFIG_DEBUG_STACK_USAGE is not set
> > # CONFIG_DEBUG_PAGEALLOC is not set
> > CONFIG_4KSTACKS=y
> > CONFIG_X86_FIND_SMP_CONFIG=y
> > CONFIG_X86_MPPARSE=y
> >
> > #
> > # Security options
> > #
> > # CONFIG_KEYS is not set
> > # CONFIG_SECURITY is not set
> >
> > #
> > # Cryptographic options
> > #
> > CONFIG_CRYPTO=y
> > CONFIG_CRYPTO_HMAC=y
> > # CONFIG_CRYPTO_NULL is not set
> > CONFIG_CRYPTO_MD4=m
> > CONFIG_CRYPTO_MD5=y
> > CONFIG_CRYPTO_SHA1=m
> > CONFIG_CRYPTO_SHA256=m
> > CONFIG_CRYPTO_SHA512=m
> > CONFIG_CRYPTO_WP512=m
> > CONFIG_CRYPTO_TGR192=m
> > CONFIG_CRYPTO_DES=y
> > CONFIG_CRYPTO_BLOWFISH=m
> > CONFIG_CRYPTO_TWOFISH=m
> > CONFIG_CRYPTO_SERPENT=m
> > CONFIG_CRYPTO_AES_586=m
> > CONFIG_CRYPTO_CAST5=m
> > CONFIG_CRYPTO_CAST6=m
> > CONFIG_CRYPTO_TEA=m
> > CONFIG_CRYPTO_ARC4=m
> > CONFIG_CRYPTO_KHAZAD=m
> > CONFIG_CRYPTO_ANUBIS=m
> > CONFIG_CRYPTO_DEFLATE=m
> > CONFIG_CRYPTO_MICHAEL_MIC=m
> > CONFIG_CRYPTO_CRC32C=m
> > # CONFIG_CRYPTO_TEST is not set
> >
> > #
> > # Hardware crypto devices
> > #
> > CONFIG_CRYPTO_DEV_PADLOCK=m
> > CONFIG_CRYPTO_DEV_PADLOCK_AES=y
> >
> > #
> > # Library routines
> > #
> > CONFIG_CRC_CCITT=m
> > CONFIG_CRC32=y
> > CONFIG_LIBCRC32C=m
> > CONFIG_ZLIB_INFLATE=y
> > CONFIG_ZLIB_DEFLATE=m
> > CONFIG_GENERIC_HARDIRQS=y
> > CONFIG_GENERIC_IRQ_PROBE=y
> > CONFIG_X86_SMP=y
> > CONFIG_X86_HT=y
> > CONFIG_X86_BIOS_REBOOT=y
> > CONFIG_X86_TRAMPOLINE=y
> > CONFIG_PC=y
> >
> > lsmod
> >
> > Module Size Used by
> > pcmcia 29972 4
> > rtc 10260 0
> > pcspkr 4684 0
> > parport_pc 36036 0
> > parport 26560 1 parport_pc
> > floppy 60052 1
> > neofb 19740 1
> > vgastate 11520 1 neofb
> > piix 11524 0 [permanent]
> > xircom_cb 12672 0
> > cs461x 5128 0
> > gameport 17800 2 cs461x
> > yenta_socket 23048 3
> > rsrc_nonstatic 13696 1 yenta_socket
> > pcmcia_core 53892 3 pcmcia,yenta_socket,rsrc_nonstatic
> > uhci_hcd 33548 0
> > usb_storage 109328 0
> > scsi_mod 97352 1 usb_storage
> > ehci_hcd 45320 0
> > usbcore 128220 4 uhci_hcd,usb_storage,ehci_hcd
> >
> >
> > pspci output
> > 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
> > bridge (rev 03)
> > Flags: bus master, medium devsel, latency 64
> > Memory at 40000000 (32-bit, prefetchable)
> > Capabilities: [a0] AGP version 1.0
> >
> > 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP
> > bridge (rev 03) (prog-if 00 [Normal decode])
> > Flags: bus master, 66Mhz, medium devsel, latency 168
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
> > I/O behind bridge: 0000d000-0000dfff
> > Memory behind bridge: 70000000-dfffffff
> > Prefetchable memory behind bridge: e0000000-f7ffffff
> > Expansion ROM at 0000d000 [disabled] [size=4K]
> >
> > 0000:00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
> > Subsystem: IBM: Unknown device 0130
> > Flags: bus master, medium devsel, latency 168, IRQ 10
> > Memory at 50103000 (32-bit, non-prefetchable)
> > Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
> > Memory window 0: 0c000000-0c3ff000 (prefetchable)
> > Memory window 1: 0c400000-0c7ff000
> > I/O window 0: 00004800-000048ff
> > I/O window 1: 00004c00-00004cff
> > 16-bit legacy interface ports at 0001
> >
> > 0000:00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
> > Subsystem: IBM: Unknown device 0130
> > Flags: bus master, medium devsel, latency 168, IRQ 11
> > Memory at 50102000 (32-bit, non-prefetchable)
> > Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
> > Memory window 0: 0c800000-0cbff000 (prefetchable)
> > Memory window 1: 0cc00000-0cfff000
> > I/O window 0: 00005000-000050ff
> > I/O window 1: 00005400-000054ff
> > 16-bit legacy interface ports at 0001
> >
> > 0000:00:03.0 Communication controller: Agere Systems (former Lucent
> > Microelectronics) WinModem 56k (rev 01)
> > Subsystem: IBM: Unknown device 018c
> > Flags: bus master, medium devsel, latency 0, IRQ 11
> > Memory at 50101000 (32-bit, non-prefetchable)
> > I/O ports at 4500 [size=8]
> > I/O ports at 4400 [size=256]
> > Capabilities: [f8] Power Management version 2
> >
> > 0000:00:06.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
> > [CrystalClear SoundFusion Audio Accelerator] (rev 01)
> > Subsystem: IBM: Unknown device 0153
> > Flags: bus master, slow devsel, latency 64, IRQ 10
> > Memory at 50100000 (32-bit, non-prefetchable)
> > Memory at 50000000 (32-bit, non-prefetchable) [size=1M]
> > Capabilities: [40] Power Management version 2
> >
> > 0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
> > Flags: bus master, medium devsel, latency 0
> >
> > 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
> > (prog-if 80 [Master])
> > Flags: bus master, medium devsel, latency 48
> > I/O ports at fcf0 [size=16]
> >
> > 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
> > (prog-if 00 [UHCI])
> > Flags: bus master, medium devsel, latency 48, IRQ 11
> > I/O ports at 4000 [size=32]
> >
> > 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
> > Flags: medium devsel, IRQ 9
> >
> > 0000:01:00.0 VGA compatible controller: Neomagic Corporation NM2360
> > [MagicMedia 256ZX] (prog-if 00 [VGA])
> > Subsystem: IBM: Unknown device 0000
> > Flags: bus master, medium devsel, latency 128, IRQ 10
> > Memory at e0000000 (32-bit, prefetchable)
> > Memory at 70000000 (32-bit, non-prefetchable) [size=4M]
> > Memory at 70400000 (32-bit, non-prefetchable) [size=1M]
> > Capabilities: [dc] Power Management version 1
> >
> > 0000:06:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
> > Subsystem: Xircom Cardbus Ethernet 10/100
> > Flags: bus master, medium devsel, latency 64, IRQ 11
> > I/O ports at 5000 [size=200M]
> > Memory at 0cc00000 (32-bit, non-prefetchable) [size=2K]
> > Memory at 0cc00800 (32-bit, non-prefetchable) [size=2K]
> > Expansion ROM at 00004000 [disabled]
> > Capabilities: [dc] Power Management version 1
> --
> gentoo-laptop@gentoo.org mailing list
>
>
--
gentoo-laptop@gentoo.org mailing list
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-12-17 14:23 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-08 10:53 [gentoo-laptop] xircom cardbus card cannot receive data Akhil Srinivasan
2005-12-08 16:29 ` Mauro Maroni
2005-12-17 14:22 ` [gentoo-laptop] " Akhil Srinivasan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox