* [gentoo-laptop] Wireless Authentication Failure -- WPA2-PSK(TKIP+AES), rtl8192se
@ 2011-05-16 3:23 Corey Richardson
2011-05-16 6:27 ` Lie Ryan
0 siblings, 1 reply; 3+ messages in thread
From: Corey Richardson @ 2011-05-16 3:23 UTC (permalink / raw
To: gentoo-laptop
[-- Attachment #1: Type: text/plain, Size: 861 bytes --]
Greetings,
(I believe this is a decent list for this, redirect otherwise)
I have been unable to authenticate to my WAP. From the subject you can
see the authentication it normally uses. I tried bunches of other
combinations but I can only connect when the network is Unprotected. I
have an rtl8192se, the driver is built into the kernel and I have the
rtl8192se and rtl8192se-firmware packages. I am led to believe this
isn't a driver issue. I use wpa_supplicant with wicd. The oddest part is
it worked fine yesterday when I shut off the laptop, and now it doesn't
work. I've re-emerged wicd and friends, rebuilt the kernel, made sure
options were checked in the kernel config, etc.
What more should I do, and is there any more information I need to
include? Attached are a few logs. I couldn't find any logs for
wpa_supplicant, however.
--
Corey Richardson
[-- Attachment #2: wicd.log --]
[-- Type: text/plain, Size: 4716 bytes --]
2011/05/15 23:11:30 :: ---------------------------
2011/05/15 23:11:30 :: wicd initializing...
2011/05/15 23:11:30 :: ---------------------------
2011/05/15 23:11:30 :: wicd is version 1.7.1b2 565
2011/05/15 23:11:30 :: setting backend to external
2011/05/15 23:11:30 :: trying to load backend external
2011/05/15 23:11:30 :: successfully loaded backend external
2011/05/15 23:11:30 :: trying to load backend external
2011/05/15 23:11:30 :: successfully loaded backend external
2011/05/15 23:11:30 :: Automatically detected wireless interface wlan0
2011/05/15 23:11:30 :: setting wireless interface wlan0
2011/05/15 23:11:30 :: automatically detected wired interface eth0
2011/05/15 23:11:30 :: setting wired interface eth0
2011/05/15 23:11:30 :: setting wpa driver wext
2011/05/15 23:11:30 :: setting use global dns to False
2011/05/15 23:11:30 :: setting global dns
2011/05/15 23:11:30 :: global dns servers are None None None
2011/05/15 23:11:30 :: domain is None
2011/05/15 23:11:30 :: search domain is None
2011/05/15 23:11:30 :: setting automatically reconnect when connection drops True
2011/05/15 23:11:30 :: Setting dhcp client to 0
2011/05/15 23:11:30 :: Wireless configuration file found...
2011/05/15 23:11:30 :: Wired configuration file found...
2011/05/15 23:11:30 :: chmoding configuration files 0600...
2011/05/15 23:11:30 :: chowning configuration files root:root...
2011/05/15 23:11:30 :: Using wireless interface...wlan0
2011/05/15 23:11:30 :: Using wired interface...eth0
2011/05/15 23:14:31 :: ---------------------------
2011/05/15 23:14:31 :: wicd initializing...
2011/05/15 23:14:31 :: ---------------------------
2011/05/15 23:14:31 :: wicd is version 1.7.1b2 565
2011/05/15 23:14:31 :: setting backend to external
2011/05/15 23:14:31 :: trying to load backend external
2011/05/15 23:14:31 :: successfully loaded backend external
2011/05/15 23:14:31 :: trying to load backend external
2011/05/15 23:14:31 :: successfully loaded backend external
2011/05/15 23:14:31 :: Automatically detected wireless interface wlan0
2011/05/15 23:14:31 :: setting wireless interface wlan0
2011/05/15 23:14:31 :: automatically detected wired interface eth0
2011/05/15 23:14:31 :: setting wired interface eth0
2011/05/15 23:14:31 :: setting wpa driver wext
2011/05/15 23:14:31 :: setting use global dns to False
2011/05/15 23:14:31 :: setting global dns
2011/05/15 23:14:31 :: global dns servers are None None None
2011/05/15 23:14:31 :: domain is None
2011/05/15 23:14:31 :: search domain is None
2011/05/15 23:14:31 :: setting automatically reconnect when connection drops True
2011/05/15 23:14:31 :: Setting dhcp client to 0
2011/05/15 23:14:31 :: Wireless configuration file found...
2011/05/15 23:14:31 :: Wired configuration file found...
2011/05/15 23:14:31 :: chmoding configuration files 0600...
2011/05/15 23:14:31 :: chowning configuration files root:root...
2011/05/15 23:14:31 :: Using wireless interface...wlan0
2011/05/15 23:14:31 :: Using wired interface...eth0
2011/05/15 23:14:33 :: hidden
2011/05/15 23:14:39 :: Autoconnecting...
2011/05/15 23:14:39 :: No wired connection present, attempting to autoconnect to wireless network
2011/05/15 23:14:40 :: hidden
2011/05/15 23:14:40 :: trying to automatically connect to...cnc_west
2011/05/15 23:14:40 :: Connecting to wireless network cnc_west
2011/05/15 23:14:41 :: Putting interface down
2011/05/15 23:14:41 :: Releasing DHCP leases...
2011/05/15 23:14:41 :: Setting false IP...
2011/05/15 23:14:42 :: Stopping wpa_supplicant
2011/05/15 23:14:42 :: Flushing the routing table...
2011/05/15 23:14:42 :: Putting interface up...
2011/05/15 23:14:44 :: Generating psk...
2011/05/15 23:14:44 :: Attempting to authenticate...
2011/05/15 23:14:47 :: wpa_supplicant rescan forced...
2011/05/15 23:15:25 :: wpa_supplicant authentication may have failed.
2011/05/15 23:15:25 :: connect result is Failed
2011/05/15 23:15:25 :: exiting connection thread
2011/05/15 23:15:28 :: Sending connection attempt result bad_pass
2011/05/15 23:15:28 :: Autoconnecting...
2011/05/15 23:15:28 :: No wired connection present, attempting to autoconnect to wireless network
2011/05/15 23:15:31 :: hidden
2011/05/15 23:15:31 :: trying to automatically connect to...cnc_west
2011/05/15 23:15:31 :: Connecting to wireless network cnc_west
2011/05/15 23:15:31 :: Putting interface down
2011/05/15 23:15:31 :: Releasing DHCP leases...
2011/05/15 23:15:31 :: Setting false IP...
2011/05/15 23:15:31 :: Stopping wpa_supplicant
2011/05/15 23:15:31 :: Flushing the routing table...
2011/05/15 23:15:31 :: Putting interface up...
2011/05/15 23:15:33 :: Generating psk...
2011/05/15 23:15:33 :: Attempting to authenticate...
2011/05/15 23:15:36 :: wpa_supplicant rescan forced...
[-- Attachment #3: messages --]
[-- Type: text/plain, Size: 114984 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-gentoo-r5 (root@dalek) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #1 SMP Sun May 15 14:32:50 EDT 2011
[ 0.000000] Command line: root=/dev/sda3
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba64000 (usable)
[ 0.000000] BIOS-e820: 000000007ba64000 - 000000007babf000 (reserved)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb82000 (usable)
[ 0.000000] BIOS-e820: 000000007bb82000 - 000000007bbbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbdf000 (usable)
[ 0.000000] BIOS-e820: 000000007bbdf000 - 000000007bbf7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
[ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard Presario CQ56 Notebook PC/1605, BIOS F.03 07/07/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FC0000000 write-back
[ 0.000000] 2 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007bc00000
[ 0.000000] 0000000000 - 007bc00000 page 2M
[ 0.000000] kernel direct mapping tables up to 7bc00000 @ 1fffd000-20000000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000007bbf6120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000007bbf5000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000007bbe3000 0D8C1 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000007bb8f000 00040
[ 0.000000] ACPI: HPET 000000007bbf4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000007bbf3000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000007bbf2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! 000000007bbf1000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000007bbe2000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: BOOT 000000007bbe1000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007bbe0000 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20060317)
[ 0.000000] ACPI: SSDT 000000007bbdf000 00655 (v01 PmRef CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007bc00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007bc00000
[ 0.000000] NODE_DATA [000000007ba5f000 - 000000007ba63fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079200000-ffff88007adfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ba64
[ 0.000000] 0: 0x0007babf -> 0x0007bb82
[ 0.000000] 0: 0x0007bbbf -> 0x0007bbdf
[ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
[ 0.000000] On node 0 totalpages: 506590
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6874 pages used for memmap
[ 0.000000] DMA32 zone: 495734 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007ba64000 - 000000007babf000
[ 0.000000] PM: Registered nosave memory: 000000007bb82000 - 000000007bbbf000
[ 0.000000] PM: Registered nosave memory: 000000007bbdf000 - 000000007bbf7000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007b800000 s75392 r8192 d22912 u524288
[ 0.000000] pcpu-alloc: s75392 r8192 d22912 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 499654
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1986448k/2027520k available (5583k kernel code, 1160k absent, 39912k reserved, 3495k data, 588k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2194.127 MHz processor.
[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.25 BogoMIPS (lpj=2194127)
[ 0.001245] pid_max: default: 32768 minimum: 301
[ 0.001390] Security Framework initialized
[ 0.001511] SELinux: Initializing.
[ 0.002011] SELinux: Starting in permissive mode
[ 0.002210] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003547] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004228] Mount-cache hash table entries: 256
[ 0.004527] Initializing cgroup subsys ns
[ 0.004651] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004854] Initializing cgroup subsys cpuacct
[ 0.004976] Initializing cgroup subsys freezer
[ 0.005036] mce: CPU supports 6 MCE banks
[ 0.005161] CPU0: Thermal monitoring enabled (TM1)
[ 0.005283] using mwait in idle threads.
[ 0.005437] SMP alternatives: switching to UP code
[ 0.010468] ACPI: Core revision 20110112
[ 0.017071] Setting APIC routing to flat
[ 0.017506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.027826] CPU0: Intel(R) Celeron(R) CPU 900 @ 2.20GHz stepping 0a
[ 0.028998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.028998] ... version: 2
[ 0.028998] ... bit width: 40
[ 0.028998] ... generic registers: 2
[ 0.028998] ... value mask: 000000ffffffffff
[ 0.028998] ... max period: 000000007fffffff
[ 0.028998] ... fixed-purpose events: 3
[ 0.028998] ... event mask: 0000000700000003
[ 0.029140] Brought up 1 CPUs
[ 0.029259] Total of 1 processors activated (4388.25 BogoMIPS).
[ 0.029878] kworker/u:0 used greatest stack depth: 6144 bytes left
[ 0.030278] Time: 3:14:12 Date: 05/16/11
[ 0.030434] NET: Registered protocol family 16
[ 0.030847] kworker/u:0 used greatest stack depth: 5848 bytes left
[ 0.031091] ACPI: bus type pci registered
[ 0.031322] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.031527] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.038053] PCI: Using configuration type 1 for base access
[ 0.046377] bio: create slab <bio-0> at 0
[ 0.048053] ACPI: EC: Look up EC in DSDT
[ 0.049484] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.051229] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.053143] ACPI: Interpreter enabled
[ 0.053264] ACPI: (supports S0 S3 S4 S5)
[ 0.053561] ACPI: Using IOAPIC for interrupt routing
[ 0.063207] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.063551] ACPI: No dock devices found.
[ 0.063672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.064280] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.065073] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.065198] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.065321] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.065522] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.065735] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.065776] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.065789] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[ 0.065798] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.065804] pci 0000:00:02.0: reg 20: [io 0x4110-0x4117]
[ 0.065835] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.065846] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
[ 0.065919] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.065980] pci 0000:00:1a.0: reg 20: [io 0x40e0-0x40ff]
[ 0.066030] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.066078] pci 0000:00:1a.1: reg 20: [io 0x40c0-0x40df]
[ 0.066147] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.067995] pci 0000:00:1a.7: reg 10: [mem 0x94505c00-0x94505fff]
[ 0.080021] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.080026] pci 0000:00:1a.7: PME# disabled
[ 0.080057] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.080073] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
[ 0.080131] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.080135] pci 0000:00:1b.0: PME# disabled
[ 0.080154] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.080212] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.080216] pci 0000:00:1c.0: PME# disabled
[ 0.080237] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.080297] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.080300] pci 0000:00:1c.1: PME# disabled
[ 0.080329] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.080392] pci 0000:00:1d.0: reg 20: [io 0x40a0-0x40bf]
[ 0.080454] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.081033] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
[ 0.081086] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.081147] pci 0000:00:1d.2: reg 20: [io 0x4060-0x407f]
[ 0.081210] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
[ 0.081269] pci 0000:00:1d.3: reg 20: [io 0x4040-0x405f]
[ 0.081332] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.082994] pci 0000:00:1d.7: reg 10: [mem 0x94505800-0x94505bff]
[ 0.095020] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.095025] pci 0000:00:1d.7: PME# disabled
[ 0.095046] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.095106] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[ 0.095222] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.095243] pci 0000:00:1f.2: reg 10: [io 0x4108-0x410f]
[ 0.095251] pci 0000:00:1f.2: reg 14: [io 0x411c-0x411f]
[ 0.095260] pci 0000:00:1f.2: reg 18: [io 0x4100-0x4107]
[ 0.095269] pci 0000:00:1f.2: reg 1c: [io 0x4118-0x411b]
[ 0.095997] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
[ 0.096006] pci 0000:00:1f.2: reg 24: [mem 0x94505000-0x945057ff]
[ 0.096042] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.096046] pci 0000:00:1f.2: PME# disabled
[ 0.096063] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.096080] pci 0000:00:1f.3: reg 10: [mem 0x94506000-0x945060ff 64bit]
[ 0.096102] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
[ 0.096138] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
[ 0.096163] pci 0000:00:1f.6: reg 10: [mem 0x94504000-0x94504fff 64bit]
[ 0.096294] pci 0000:02:00.0: [10ec:8171] type 0 class 0x000280
[ 0.096312] pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.096325] pci 0000:02:00.0: reg 14: [mem 0x93500000-0x93503fff]
[ 0.096414] pci 0000:02:00.0: supports D1 D2
[ 0.096416] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.096421] pci 0000:02:00.0: PME# disabled
[ 0.098006] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.098129] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.098133] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.098139] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.098202] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.098219] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.098250] pci 0000:03:00.0: reg 18: [mem 0x91410000-0x91410fff 64bit pref]
[ 0.098269] pci 0000:03:00.0: reg 20: [mem 0x91400000-0x9140ffff 64bit pref]
[ 0.098282] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.098323] pci 0000:03:00.0: supports D1 D2
[ 0.098325] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.098330] pci 0000:03:00.0: PME# disabled
[ 0.100005] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.100129] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.100133] pci 0000:00:1c.1: bridge window [mem 0x92500000-0x934fffff]
[ 0.100139] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.100204] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.100330] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.100335] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.100341] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.100343] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.100346] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.100348] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.100351] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.100369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.100589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.100672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.100723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.106010] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.106548] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.107044] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.107575] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.108043] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.108574] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.109162] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.109693] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.110470] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.110680] vgaarb: loaded
[ 0.110959] SCSI subsystem initialized
[ 0.111097] libata version 3.00 loaded.
[ 0.111206] usbcore: registered new interface driver usbfs
[ 0.111369] usbcore: registered new interface driver hub
[ 0.111531] usbcore: registered new device driver usb
[ 0.112193] wmi: Mapper loaded
[ 0.112356] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.112518] PCI: Using ACPI for IRQ routing
[ 0.112638] PCI: pci_cache_line_size set to 64 bytes
[ 0.112717] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.112720] reserve RAM buffer: 000000007ba64000 - 000000007bffffff
[ 0.112723] reserve RAM buffer: 000000007bb82000 - 000000007bffffff
[ 0.112726] reserve RAM buffer: 000000007bbdf000 - 000000007bffffff
[ 0.112728] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
[ 0.113075] cfg80211: Calling CRDA to update world regulatory domain
[ 0.113363] NetLabel: Initializing
[ 0.113481] NetLabel: domain hash size = 128
[ 0.114014] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.114144] NetLabel: unlabeled traffic allowed by default
[ 0.115082] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.115384] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.117004] Switching to clocksource hpet
[ 0.117353] Switched to NOHz mode on CPU #0
[ 0.122777] pnp: PnP ACPI init
[ 0.122909] ACPI: bus type pnp registered
[ 0.123095] pnp 00:00: [mem 0xf8000000-0xfbffffff]
[ 0.123232] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.123357] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.124002] pnp 00:01: [bus 00-ff]
[ 0.124005] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.124008] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.124023] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.124025] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.124028] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.124030] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.124032] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.124034] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.124036] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.124039] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.124041] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.124043] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.124045] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.124047] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.124049] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.124052] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.124054] pnp 00:01: [mem 0x000f0000-0x000fffff window]
[ 0.124056] pnp 00:01: [mem 0x80000000-0xfebfffff window]
[ 0.124058] pnp 00:01: [mem 0xfed40000-0xfed44fff window]
[ 0.124158] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.124319] pnp 00:02: [io 0x002e-0x002f]
[ 0.124321] pnp 00:02: [io 0x004e-0x004f]
[ 0.124323] pnp 00:02: [io 0x164e-0x164f]
[ 0.124325] pnp 00:02: [io 0x0061]
[ 0.124327] pnp 00:02: [io 0x0070]
[ 0.124331] pnp 00:02: [io 0x0080]
[ 0.124333] pnp 00:02: [io 0x0092]
[ 0.124335] pnp 00:02: [io 0x00b2-0x00b3]
[ 0.124337] pnp 00:02: [io 0x0063]
[ 0.124338] pnp 00:02: [io 0x0065]
[ 0.124340] pnp 00:02: [io 0x0067]
[ 0.124342] pnp 00:02: [io 0x0600-0x060f]
[ 0.124344] pnp 00:02: [io 0x0610]
[ 0.124345] pnp 00:02: [io 0x0800-0x080f]
[ 0.124347] pnp 00:02: [io 0x0810-0x0817]
[ 0.124349] pnp 00:02: [io 0x0820-0x0823]
[ 0.124351] pnp 00:02: [io 0x0400-0x047f]
[ 0.124352] pnp 00:02: [io 0x0500-0x053f]
[ 0.124354] pnp 00:02: [io 0x0380-0x0387]
[ 0.124356] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[ 0.124358] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.124360] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.124362] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.124364] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.124366] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.124368] pnp 00:02: [mem 0xfed20000-0xfed3ffff]
[ 0.124370] pnp 00:02: [mem 0xfed40000-0xfed44fff]
[ 0.124372] pnp 00:02: [mem 0xfed45000-0xfed8ffff]
[ 0.124374] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.124482] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.124607] system 00:02: [io 0x0600-0x060f] has been reserved
[ 0.124730] system 00:02: [io 0x0610] has been reserved
[ 0.124851] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.124974] system 00:02: [io 0x0810-0x0817] has been reserved
[ 0.125117] system 00:02: [io 0x0820-0x0823] has been reserved
[ 0.125239] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.125362] system 00:02: [io 0x0500-0x053f] has been reserved
[ 0.125485] system 00:02: [io 0x0380-0x0387] has been reserved
[ 0.125608] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.125732] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.125855] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.125978] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.126110] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.126234] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.126358] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.126482] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.126606] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.126730] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.126855] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.126867] pnp 00:03: [io 0x0000-0x001f]
[ 0.126869] pnp 00:03: [io 0x0081-0x0091]
[ 0.126871] pnp 00:03: [io 0x0093-0x009f]
[ 0.126873] pnp 00:03: [io 0x00c0-0x00df]
[ 0.126875] pnp 00:03: [dma 4]
[ 0.126930] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.126958] pnp 00:04: [io 0x0070-0x0077]
[ 0.127029] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.127097] pnp 00:05: [irq 0 disabled]
[ 0.127107] pnp 00:05: [irq 8]
[ 0.127109] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.127169] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.127182] pnp 00:06: [io 0x00f0]
[ 0.127187] pnp 00:06: [irq 13]
[ 0.127243] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.127254] pnp 00:07: [mem 0xff800000-0xffffffff]
[ 0.127311] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.127331] pnp 00:08: [io 0x0060]
[ 0.127332] pnp 00:08: [io 0x0064]
[ 0.127338] pnp 00:08: [irq 1]
[ 0.127395] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.127417] pnp 00:09: [irq 12]
[ 0.127477] pnp 00:09: Plug and Play ACPI device, IDs SYN1e37 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.127637] pnp: PnP ACPI: found 10 devices
[ 0.127758] ACPI: ACPI bus type pnp unregistered
[ 0.132530] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.132762] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.132885] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.133031] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.133156] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.133364] pci 0000:03:00.0: BAR 6: assigned [mem 0x91420000-0x9142ffff pref]
[ 0.133565] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.133687] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.133812] pci 0000:00:1c.1: bridge window [mem 0x92500000-0x934fffff]
[ 0.133937] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.134149] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.134270] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.134395] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.134518] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.134661] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.134787] pci 0000:00:1c.0: setting latency timer to 64
[ 0.134797] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.134921] pci 0000:00:1c.1: setting latency timer to 64
[ 0.134928] pci 0000:00:1e.0: setting latency timer to 64
[ 0.134932] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.134934] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.134936] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.134938] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.134941] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.134944] pci_bus 0000:02: resource 1 [mem 0x93500000-0x944fffff]
[ 0.134946] pci_bus 0000:02: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[ 0.134949] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.134952] pci_bus 0000:03: resource 1 [mem 0x92500000-0x934fffff]
[ 0.134955] pci_bus 0000:03: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[ 0.134958] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.134961] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.134963] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.134966] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.135000] NET: Registered protocol family 2
[ 0.135214] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.135894] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.138256] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.138891] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.139060] TCP reno registered
[ 0.139201] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.139343] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.139614] NET: Registered protocol family 1
[ 0.139846] RPC: Registered udp transport module.
[ 0.139966] RPC: Registered tcp transport module.
[ 0.140103] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.140239] pci 0000:00:02.0: Boot video device
[ 0.140249] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 0.140251] pci 0000:00:1a.0: Performing full reset
[ 0.140271] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.140272] pci 0000:00:1a.1: Performing full reset
[ 0.140304] pci 0000:00:1a.7: EHCI: BIOS handoff
[ 0.152099] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 0.152101] pci 0000:00:1d.0: Performing full reset
[ 0.152120] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.152122] pci 0000:00:1d.1: Performing full reset
[ 0.152140] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.152142] pci 0000:00:1d.2: Performing full reset
[ 0.152161] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.152162] pci 0000:00:1d.3: Performing full reset
[ 0.152185] pci 0000:00:1d.7: EHCI: BIOS handoff
[ 0.164137] PCI: CLS 64 bytes, default 64
[ 0.164289] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.164405] Simple Boot Flag at 0x44 set to 0x1
[ 0.165157] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 0.165316] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.165757] audit: initializing netlink socket (disabled)
[ 0.165881] type=2000 audit(1305515652.164:1): initialized
[ 0.166401] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.170056] VFS: Disk quotas dquot_6.5.2
[ 0.170300] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.171559] msgmni has been set to 3879
[ 0.171773] SELinux: Registering netfilter hooks
[ 0.172166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.172353] io scheduler noop registered
[ 0.172464] io scheduler deadline registered
[ 0.172645] io scheduler cfq registered (default)
[ 0.172862] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.172954] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.173134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.173527] Non-volatile memory driver v1.3
[ 0.173640] Linux agpgart interface v0.103
[ 0.173788] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.173988] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.174631] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.174898] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.177441] ACPI: AC Adapter [ACAD] (on-line)
[ 0.177789] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.178029] ACPI: Power Button [PWRB]
[ 0.179002] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.179574] ACPI: Lid Switch [LID0]
[ 0.179769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.179956] ACPI: Power Button [PWRF]
[ 0.180164] ACPI: acpi_idle registered with cpuidle
[ 0.180333] Monitor-Mwait will be used to enter C-1 state
[ 0.180352] Monitor-Mwait will be used to enter C-2 state
[ 0.180370] Monitor-Mwait will be used to enter C-3 state
[ 0.180375] Marking TSC unstable due to TSC halts in idle
[ 0.184244] [Firmware Bug]: Invalid critical threshold (0)
[ 0.185734] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.185850] ACPI: Thermal Zone [TZ01] (49 C)
[ 0.186143] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.187452] [drm] Initialized drm 1.1.0 20060810
[ 0.187658] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.187777] i915 0000:00:02.0: setting latency timer to 64
[ 0.225946] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.226088] [drm] Driver supports precise vblank timestamp query.
[ 0.313243] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.313760] fixme: max PWM is zero.
[ 0.364863] ACPI: Battery Slot [BAT0] (battery present)
[ 0.627199] fbcon: inteldrmfb (fb0) is primary device
[ 0.636558] Console: switching to colour frame buffer device 170x48
[ 0.639068] fb0: inteldrmfb frame buffer device
[ 0.639088] drm: registered panic notifier
[ 0.643184] ACPI Error: [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dswload-802)
[ 0.643246] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20110112/psloop-231)
[ 0.643291] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.DD03.GBQC] (Node ffff880078f42528), AE_ALREADY_EXISTS (20110112/psparse-536)
[ 0.643378] ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
[ 0.643425] ACPI Error: Method parse/execution failed [\_SB_.PCI0.OVGA.DD03._BQC] (Node ffff880078f42500), AE_ALREADY_EXISTS (20110112/psparse-536)
[ 0.643510] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[ 0.643558] ACPI Warning: Evaluating _BQC failed (20110112/video-484)
[ 0.645816] acpi device:03: registered as cooling_device1
[ 0.646020] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.646071] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 0.646261] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 0.648230] brd: module loaded
[ 0.649255] loop: module loaded
[ 0.649529] ahci 0000:00:1f.2: version 3.0
[ 0.649554] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.649647] ahci: SSS flag set, parallel bus scan disabled
[ 0.649710] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.651180] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.652650] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.659007] scsi0 : ahci
[ 0.660643] scsi1 : ahci
[ 0.662209] scsi2 : ahci
[ 0.663740] scsi3 : ahci
[ 0.665229] scsi4 : ahci
[ 0.666713] scsi5 : ahci
[ 0.668280] ata1: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505100 irq 19
[ 0.669670] ata2: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505180 irq 19
[ 0.671041] ata3: DUMMY
[ 0.672397] ata4: DUMMY
[ 0.673693] ata5: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505300 irq 19
[ 0.675009] ata6: SATA max UDMA/133 abar m2048@0x94505000 port 0x94505380 irq 19
[ 0.676617] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.677930] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.679290] r8169 0000:03:00.0: setting latency timer to 64
[ 0.679302] r8169 0000:03:00.0: no MSI. Back to INTx.
[ 0.680850] r8169 0000:03:00.0: eth0: RTL8102e at 0xffffc90004912000, 60:eb:69:1b:e5:60, XID 04e00000 IRQ 17
[ 0.682223] console [netcon0] enabled
[ 0.683528] netconsole: network logging started
[ 0.685013] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.686343] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 0.686363] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.687710] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.687714] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.689049] drivers/usb/core/inode.c: creating file 'devices'
[ 0.689061] drivers/usb/core/inode.c: creating file '001'
[ 0.689118] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.690485] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
[ 0.690490] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 0.690522] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.691855] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.695737] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.695739] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 0.695752] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94505c00
[ 0.697092] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.700983] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.706022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.707383] usb usb1: default language 0x0409
[ 0.707389] usb usb1: udev 1, busnum 1, minor = 0
[ 0.707391] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.708707] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.710028] usb usb1: Product: EHCI Host Controller
[ 0.711302] usb usb1: Manufacturer: Linux 2.6.38-gentoo-r5 ehci_hcd
[ 0.712547] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.713826] usb usb1: usb_probe_device
[ 0.713829] usb usb1: configuration #1 chosen from 1 choice
[ 0.713836] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.713892] hub 1-0:1.0: usb_probe_interface
[ 0.713894] hub 1-0:1.0: usb_probe_interface - got id
[ 0.713897] hub 1-0:1.0: USB hub found
[ 0.715077] hub 1-0:1.0: 4 ports detected
[ 0.716218] hub 1-0:1.0: standalone hub
[ 0.716219] hub 1-0:1.0: no power switching (usb 1.0)
[ 0.716221] hub 1-0:1.0: individual port over-current protection
[ 0.716223] hub 1-0:1.0: power on to power good time: 20ms
[ 0.716227] hub 1-0:1.0: local power source is good
[ 0.716229] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 0.716254] drivers/usb/core/inode.c: creating file '001'
[ 0.716300] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.717497] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.717500] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.718642] drivers/usb/core/inode.c: creating file '002'
[ 0.718700] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.719833] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 0.719838] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 0.719867] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.720970] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.724851] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.724853] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 0.724875] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x94505800
[ 0.725971] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 0.729854] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 0.735021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.736130] usb usb2: default language 0x0409
[ 0.736136] usb usb2: udev 1, busnum 2, minor = 128
[ 0.736138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.737231] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.738316] usb usb2: Product: EHCI Host Controller
[ 0.739379] usb usb2: Manufacturer: Linux 2.6.38-gentoo-r5 ehci_hcd
[ 0.740445] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.741550] usb usb2: usb_probe_device
[ 0.741552] usb usb2: configuration #1 chosen from 1 choice
[ 0.741559] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 0.741607] hub 2-0:1.0: usb_probe_interface
[ 0.741609] hub 2-0:1.0: usb_probe_interface - got id
[ 0.741610] hub 2-0:1.0: USB hub found
[ 0.742663] hub 2-0:1.0: 8 ports detected
[ 0.743714] hub 2-0:1.0: standalone hub
[ 0.743715] hub 2-0:1.0: no power switching (usb 1.0)
[ 0.743717] hub 2-0:1.0: individual port over-current protection
[ 0.743719] hub 2-0:1.0: power on to power good time: 20ms
[ 0.743723] hub 2-0:1.0: local power source is good
[ 0.743725] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 0.743762] drivers/usb/core/inode.c: creating file '001'
[ 0.743832] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.745036] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.746163] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.746167] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.747311] drivers/usb/core/inode.c: creating file '003'
[ 0.747371] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.748503] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.749642] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.749644] uhci_hcd 0000:00:1a.0: Performing full reset
[ 0.749658] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 0.749665] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[ 0.750826] usb usb3: default language 0x0409
[ 0.750832] usb usb3: udev 1, busnum 3, minor = 256
[ 0.750835] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.751979] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.753119] usb usb3: Product: UHCI Host Controller
[ 0.754256] usb usb3: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[ 0.755389] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.756584] usb usb3: usb_probe_device
[ 0.756587] usb usb3: configuration #1 chosen from 1 choice
[ 0.756593] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 0.756645] hub 3-0:1.0: usb_probe_interface
[ 0.756647] hub 3-0:1.0: usb_probe_interface - got id
[ 0.756648] hub 3-0:1.0: USB hub found
[ 0.757779] hub 3-0:1.0: 2 ports detected
[ 0.758851] hub 3-0:1.0: standalone hub
[ 0.758852] hub 3-0:1.0: no power switching (usb 1.0)
[ 0.758854] hub 3-0:1.0: individual port over-current protection
[ 0.758856] hub 3-0:1.0: power on to power good time: 2ms
[ 0.758859] hub 3-0:1.0: local power source is good
[ 0.758861] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 0.758880] drivers/usb/core/inode.c: creating file '001'
[ 0.758909] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 0.758933] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.760017] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.760020] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.761106] drivers/usb/core/inode.c: creating file '004'
[ 0.761167] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.762265] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.763339] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.763341] uhci_hcd 0000:00:1a.1: Performing full reset
[ 0.763356] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 0.763371] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[ 0.764476] usb usb4: default language 0x0409
[ 0.764481] usb usb4: udev 1, busnum 4, minor = 384
[ 0.764483] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.765547] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.766625] usb usb4: Product: UHCI Host Controller
[ 0.767688] usb usb4: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[ 0.768764] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.769896] usb usb4: usb_probe_device
[ 0.769899] usb usb4: configuration #1 chosen from 1 choice
[ 0.769905] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 0.769955] hub 4-0:1.0: usb_probe_interface
[ 0.769957] hub 4-0:1.0: usb_probe_interface - got id
[ 0.769959] hub 4-0:1.0: USB hub found
[ 0.771030] hub 4-0:1.0: 2 ports detected
[ 0.772078] hub 4-0:1.0: standalone hub
[ 0.772080] hub 4-0:1.0: no power switching (usb 1.0)
[ 0.772082] hub 4-0:1.0: individual port over-current protection
[ 0.772084] hub 4-0:1.0: power on to power good time: 2ms
[ 0.772087] hub 4-0:1.0: local power source is good
[ 0.772089] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 0.772105] drivers/usb/core/inode.c: creating file '001'
[ 0.772136] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 0.772154] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.773244] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.773248] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.774327] drivers/usb/core/inode.c: creating file '005'
[ 0.774382] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.775480] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.776574] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.776576] uhci_hcd 0000:00:1d.0: Performing full reset
[ 0.776591] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 0.776597] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0
[ 0.777705] usb usb5: default language 0x0409
[ 0.777711] usb usb5: udev 1, busnum 5, minor = 512
[ 0.777713] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.778782] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.779861] usb usb5: Product: UHCI Host Controller
[ 0.780937] usb usb5: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[ 0.782030] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.783178] usb usb5: usb_probe_device
[ 0.783180] usb usb5: configuration #1 chosen from 1 choice
[ 0.783186] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 0.783235] hub 5-0:1.0: usb_probe_interface
[ 0.783238] hub 5-0:1.0: usb_probe_interface - got id
[ 0.783240] hub 5-0:1.0: USB hub found
[ 0.784344] hub 5-0:1.0: 2 ports detected
[ 0.785406] hub 5-0:1.0: standalone hub
[ 0.785408] hub 5-0:1.0: no power switching (usb 1.0)
[ 0.785409] hub 5-0:1.0: individual port over-current protection
[ 0.785411] hub 5-0:1.0: power on to power good time: 2ms
[ 0.785415] hub 5-0:1.0: local power source is good
[ 0.785417] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 0.785435] drivers/usb/core/inode.c: creating file '001'
[ 0.785467] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 0.785482] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.786592] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.786595] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.787676] drivers/usb/core/inode.c: creating file '006'
[ 0.787734] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.788829] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.789918] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.789920] uhci_hcd 0000:00:1d.1: Performing full reset
[ 0.789939] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[ 0.791055] usb usb6: default language 0x0409
[ 0.791061] usb usb6: udev 1, busnum 6, minor = 640
[ 0.791063] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.792154] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.793239] usb usb6: Product: UHCI Host Controller
[ 0.794320] usb usb6: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[ 0.795406] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.796563] usb usb6: usb_probe_device
[ 0.796566] usb usb6: configuration #1 chosen from 1 choice
[ 0.796571] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 0.796622] hub 6-0:1.0: usb_probe_interface
[ 0.796624] hub 6-0:1.0: usb_probe_interface - got id
[ 0.796626] hub 6-0:1.0: USB hub found
[ 0.797724] hub 6-0:1.0: 2 ports detected
[ 0.798797] hub 6-0:1.0: standalone hub
[ 0.798799] hub 6-0:1.0: no power switching (usb 1.0)
[ 0.798801] hub 6-0:1.0: individual port over-current protection
[ 0.798803] hub 6-0:1.0: power on to power good time: 2ms
[ 0.798806] hub 6-0:1.0: local power source is good
[ 0.798808] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 0.798825] drivers/usb/core/inode.c: creating file '001'
[ 0.798858] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 0.798873] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.799969] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.799972] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.801055] drivers/usb/core/inode.c: creating file '007'
[ 0.801108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.802204] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.803295] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.803297] uhci_hcd 0000:00:1d.2: Performing full reset
[ 0.803316] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
[ 0.804438] usb usb7: default language 0x0409
[ 0.804443] usb usb7: udev 1, busnum 7, minor = 768
[ 0.804446] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.805543] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.806629] usb usb7: Product: UHCI Host Controller
[ 0.807705] usb usb7: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[ 0.808789] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.809938] usb usb7: usb_probe_device
[ 0.809941] usb usb7: configuration #1 chosen from 1 choice
[ 0.809947] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 0.809998] hub 7-0:1.0: usb_probe_interface
[ 0.810000] hub 7-0:1.0: usb_probe_interface - got id
[ 0.810013] hub 7-0:1.0: USB hub found
[ 0.811089] hub 7-0:1.0: 2 ports detected
[ 0.812149] hub 7-0:1.0: standalone hub
[ 0.812151] hub 7-0:1.0: no power switching (usb 1.0)
[ 0.812153] hub 7-0:1.0: individual port over-current protection
[ 0.812155] hub 7-0:1.0: power on to power good time: 2ms
[ 0.812158] hub 7-0:1.0: local power source is good
[ 0.812160] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 0.812179] drivers/usb/core/inode.c: creating file '001'
[ 0.812210] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 0.812233] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.813332] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.813335] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.814421] drivers/usb/core/inode.c: creating file '008'
[ 0.814488] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.815590] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.816680] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 0.816682] uhci_hcd 0000:00:1d.3: Performing full reset
[ 0.816709] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001403 0 ACK POWER sig=k CSC CONNECT
[ 0.816712] hub 1-0:1.0: port 3: status 0501 change 0001
[ 0.816740] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[ 0.817846] usb usb8: default language 0x0409
[ 0.817852] usb usb8: udev 1, busnum 8, minor = 896
[ 0.817854] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.818958] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.820053] usb usb8: Product: UHCI Host Controller
[ 0.821136] usb usb8: Manufacturer: Linux 2.6.38-gentoo-r5 uhci_hcd
[ 0.822215] usb usb8: SerialNumber: 0000:00:1d.3
[ 0.823363] usb usb8: usb_probe_device
[ 0.823366] usb usb8: configuration #1 chosen from 1 choice
[ 0.823372] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 0.823424] hub 8-0:1.0: usb_probe_interface
[ 0.823426] hub 8-0:1.0: usb_probe_interface - got id
[ 0.823428] hub 8-0:1.0: USB hub found
[ 0.824515] hub 8-0:1.0: 2 ports detected
[ 0.825602] hub 8-0:1.0: standalone hub
[ 0.825604] hub 8-0:1.0: no power switching (usb 1.0)
[ 0.825605] hub 8-0:1.0: individual port over-current protection
[ 0.825607] hub 8-0:1.0: power on to power good time: 2ms
[ 0.825611] hub 8-0:1.0: local power source is good
[ 0.825613] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 0.825633] drivers/usb/core/inode.c: creating file '001'
[ 0.825669] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[ 0.825718] Initializing USB Mass Storage driver...
[ 0.826847] usbcore: registered new interface driver usb-storage
[ 0.827936] USB Mass Storage support registered.
[ 0.829072] usbcore: registered new interface driver libusual
[ 0.830260] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 0.843235] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000
[ 0.845870] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.847000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.848289] mousedev: PS/2 mouse device common for all mice
[ 0.849717] rtc_cmos 00:04: RTC can wake from S4
[ 0.850905] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.852038] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.853206] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.854658] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.856074] cpuidle: using governor ladder
[ 0.857465] cpuidle: using governor menu
[ 0.858624] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.859506] usbcore: registered new interface driver usbhid
[ 0.860667] usbhid: USB HID core driver
[ 0.861804] ieee80211_crypt: registered algorithm 'NULL'
[ 0.861806] ieee80211_crypt: registered algorithm 'TKIP'
[ 0.861808] ieee80211_crypt: registered algorithm 'CCMP'
[ 0.861810] ieee80211_crypt: registered algorithm 'WEP'
[ 0.861819]
[ 0.861820] Linux kernel driver for RTL8192 based WLAN cards
[ 0.864109] Copyright (c) 2007-2008, Realsil Wlan
[ 0.865762] input: HP WMI hotkeys as /devices/virtual/input/input4
[ 0.867627] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.868922] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 0.868964] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.872040] uhci_hcd 0000:00:1a.1: port 1 portsc 008a,00
[ 0.881034] hda_codec: ALC270: BIOS auto-probing.
[ 0.885163] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.885991] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 0.887328] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 0.889202] ALSA device list:
[ 0.890440] #0: HDA Intel at 0x94500000 irq 22
[ 0.892563] Netfilter messages via NETLINK v0.30.
[ 0.893825] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.895251] ctnetlink v0.93: registering with nfnetlink.
[ 0.898057] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.898204] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.899487] TCP cubic registered
[ 0.900710] Initializing XFRM netlink socket
[ 0.902200] NET: Registered protocol family 10
[ 0.905816] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.907103] IPv6 over IPv4 tunneling driver
[ 0.908877] NET: Registered protocol family 17
[ 0.911252] Registering the dns_resolver key type
[ 0.912498] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.912709] PM: Hibernation image not present or could not be loaded.
[ 0.912715] registered taskstats version 1
[ 0.914264] Magic number: 11:677:209
[ 0.916414] hub 1-0:1.0: state 7 ports 4 chg 0008 evt 0000
[ 0.916421] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 0.916430] ehci_hcd 0000:00:1a.7: port 3 low speed --> companion
[ 0.916481] power_supply ACAD: hash matches
[ 0.967025] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 0.967044] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0008
[ 0.967049] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.972556] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 0.973023] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 0.973030] uhci_hcd 0000:00:1a.1: port 1 portsc 01a3,00
[ 0.973036] hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[ 1.077027] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[ 1.138030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.140246] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OCA1G, max UDMA/100
[ 1.141505] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.143896] ata1.00: configured for UDMA/100
[ 1.145255] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[ 1.146747] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.148041] sd 0:0:0:0: [sda] Write Protect is off
[ 1.149291] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.149312] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.150901] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.179030] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 1.186793] sda: sda1 sda2 sda3
[ 1.188418] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.321491] usb 4-1: skipped 1 descriptor after interface
[ 1.326490] usb 4-1: default language 0x0409
[ 1.346491] usb 4-1: udev 2, busnum 4, minor = 385
[ 1.346493] usb 4-1: New USB device found, idVendor=045e, idProduct=00e1
[ 1.347794] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.349073] usb 4-1: Product: Microsoft Notebook Receiver v2.0
[ 1.350392] usb 4-1: Manufacturer: Microsoft
[ 1.351763] usb 4-1: usb_probe_device
[ 1.351766] usb 4-1: configuration #1 chosen from 1 choice
[ 1.354491] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 1.354546] usbhid 4-1:1.0: usb_probe_interface
[ 1.354548] usbhid 4-1:1.0: usb_probe_interface - got id
[ 1.406104] input: Microsoft Microsoft Notebook Receiver v2.0 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input8
[ 1.407618] generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Receiver v2.0] on usb-0000:00:1a.1-1/input0
[ 1.409035] drivers/usb/core/inode.c: creating file '002'
[ 1.409064] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 1.612029] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.617110] ata2.00: ATAPI: hp DVDRAM GT31L, mP01, max UDMA/100
[ 1.623397] ata2.00: configured for UDMA/100
[ 1.628073] scsi 1:0:0:0: CD-ROM hp DVDRAM GT31L mP01 PQ: 0 ANSI: 5
[ 1.634292] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.635692] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.638699] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.638818] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.946029] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.954027] usb usb3: suspend_rh (auto-stop)
[ 1.954050] usb usb5: suspend_rh (auto-stop)
[ 1.954072] usb usb6: suspend_rh (auto-stop)
[ 1.954094] usb usb7: suspend_rh (auto-stop)
[ 1.954116] usb usb8: suspend_rh (auto-stop)
[ 1.990122] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400
[ 2.067124] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 2.252048] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.279645] EXT3-fs: barriers not enabled
[ 2.298828] kjournald starting. Commit interval 5 seconds
[ 2.300308] EXT3-fs (sda3): mounted filesystem with writeback data mode
[ 2.301732] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 2.304716] Freeing unused kernel memory: 588k freed
[ 2.306318] Write protecting the kernel read-only data: 8192k
[ 2.310222] Freeing unused kernel memory: 540k freed
[ 2.312063] Freeing unused kernel memory: 44k freed
[ 3.301140] cat used greatest stack depth: 4472 bytes left
[ 3.403883] gzip used greatest stack depth: 4072 bytes left
[ 3.507380] init-early.sh used greatest stack depth: 3800 bytes left
[ 5.465699] udev: starting version 151
[ 5.465755] udevd (1155): /proc/1155/oom_adj is deprecated, please use /proc/1155/oom_score_adj instead.
[ 5.669406] rtllib_crypt: registered algorithm 'NULL'
[ 5.669409] rtllib_crypt: registered algorithm 'TKIP'
[ 5.669410] rtllib_crypt: registered algorithm 'CCMP'
[ 5.669412] rtllib_crypt: registered algorithm 'WEP'
[ 5.669413]
[ 5.669414] Linux kernel driver for RTL8192 based WLAN cards
[ 5.669415] Copyright (c) 2007-2008, Realsil Wlan Driver
[ 5.669452] rtl819xSE 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.669459] rtl819xSE 0000:02:00.0: setting latency timer to 64
[ 5.669576] Memory mapped space start: 0x93500000
[ 5.670213] GetPciBusInfo(): Find Device(10EC:8171) bus=2 dev=0, func=0
[ 5.671094] GetPciBridegInfo : Find Device(8086:2940) bus=0 dev=28, func=0
[ 5.671096] Pci Bridge Vendor is found index: 0
[ 5.671098] Pci Bridge Vendor is 8086
[ 5.676800] =========>dm_InitRateAdaptiveMask: bUseRAMask=0
[ 6.912108] EXT3-fs (sda3): using internal journal
[ 8.888890] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 16.335696] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 8, phase 4, 106 us
[ 19.578566] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 19.578569] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 19.578571] HW_VAR_MRC: Turn on 1T1R MRC!
[ 19.606997] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.796941] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 19.796944] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 19.796946] HW_VAR_MRC: Turn on 1T1R MRC!
[ 25.018794] r8169 0000:03:00.0: eth0: link down
[ 25.019216] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.200860] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 27.200863] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 27.200865] HW_VAR_MRC: Turn on 1T1R MRC!
[ 29.452063] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 29.452067] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 29.452069] HW_VAR_MRC: Turn on 1T1R MRC!
[ 29.456819] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 29.811324] r8169 0000:03:00.0: eth0: link down
[ 29.811606] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.974580] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 29.974584] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 29.974585] HW_VAR_MRC: Turn on 1T1R MRC!
[ 30.122310] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 30.122313] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 30.122315] HW_VAR_MRC: Turn on 1T1R MRC!
[ 30.123863] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.473382] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 32.473386] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 32.473388] HW_VAR_MRC: Turn on 1T1R MRC!
[ 32.534475] Linking with cnc_west,channel:1, qos:1, myHT:1, networkHT:0, mode:4 cur_net.flags:0x40a
[ 32.534494] rtllib_associate_procedure_wq(), chan:1
[ 32.534497] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 32.544526] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 32.547811] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 32.550340] Association response status code 0xc
[ 32.550903] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 32.551191] rtllib_associate_procedure_wq(), chan:1
[ 32.551194] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 32.561222] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 32.563492] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 32.570744] Association response status code 0xc
[ 32.570759] rtllib_associate_procedure_wq(), chan:1
[ 32.570761] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 32.580789] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 32.583141] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 32.585650] Association response status code 0xc
[ 32.691024] ============>sync_scan_hurryup out
[ 32.691063] rtllib_associate_procedure_wq(), chan:1
[ 32.691064] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 32.701089] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 32.701419] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 32.701428] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 32.701456] rtllib_associate_procedure_wq(), chan:1
[ 32.701458] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 32.711484] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 32.713316] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 32.716564] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 32.716566] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 32.716568] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 32.716569] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 32.716571] Associated successfully
[ 32.716572] normal associate
[ 32.716577] Using G rates:108
[ 32.716578] Successfully associated, ht not enabled(0, 0)
[ 32.716582] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 32.717893] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 32.722978] RX: IEEE802.1X EAPOL frame!
[ 32.733850] RX: IEEE802.1X EAPOL frame!
[ 32.733930] alg name:CCMP
[ 32.733950] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 32.734553] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 32.734560] alg name:TKIP
[ 32.738222] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 32.738229] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 32.738833] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 32.738896] disauth packet !
[ 37.877142] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 37.877145] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 37.877147] HW_VAR_MRC: Turn on 1T1R MRC!
[ 39.320242] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 39.320251] rtllib_associate_procedure_wq(), chan:1
[ 39.320253] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 39.330309] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 39.330468] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 39.331080] rtllib_associate_procedure_wq(), chan:1
[ 39.331083] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 39.341112] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 39.342961] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 39.345935] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 39.345938] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 39.345939] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 39.345941] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 39.345943] Associated successfully
[ 39.345944] normal associate
[ 39.345950] Using G rates:108
[ 39.345951] Successfully associated, ht not enabled(0, 0)
[ 39.345956] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 39.350456] RX: IEEE802.1X EAPOL frame!
[ 39.361640] RX: IEEE802.1X EAPOL frame!
[ 39.361723] alg name:CCMP
[ 39.361741] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 39.362345] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 39.362495] alg name:TKIP
[ 39.364393] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 39.364399] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 39.365003] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 39.365072] disauth packet !
[ 43.602036] wlan0: no IPv6 routers present
[ 44.503210] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 44.503213] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 44.503215] HW_VAR_MRC: Turn on 1T1R MRC!
[ 45.946226] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 45.946235] rtllib_associate_procedure_wq(), chan:1
[ 45.946237] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 45.956261] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 45.956450] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 45.956838] rtllib_associate_procedure_wq(), chan:1
[ 45.956840] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 45.966868] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 45.968340] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 45.973007] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 45.973009] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 45.973011] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 45.973013] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 45.973014] Associated successfully
[ 45.973016] normal associate
[ 45.973020] Using G rates:108
[ 45.973022] Successfully associated, ht not enabled(0, 0)
[ 45.973026] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 45.977948] RX: IEEE802.1X EAPOL frame!
[ 45.988915] RX: IEEE802.1X EAPOL frame!
[ 45.988979] alg name:CCMP
[ 45.988996] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 45.989600] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 45.989738] alg name:TKIP
[ 45.991609] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 45.991615] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 45.992234] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 45.992278] disauth packet !
[ 51.130386] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 51.130389] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 51.130391] HW_VAR_MRC: Turn on 1T1R MRC!
[ 52.576990] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 52.577000] rtllib_associate_procedure_wq(), chan:1
[ 52.577002] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 52.587048] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 52.587279] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 52.587647] rtllib_associate_procedure_wq(), chan:1
[ 52.587650] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 52.597678] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 52.599509] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 52.602438] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 52.602441] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 52.602442] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 52.602444] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 52.602446] Associated successfully
[ 52.602447] normal associate
[ 52.602452] Using G rates:108
[ 52.602453] Successfully associated, ht not enabled(0, 0)
[ 52.602458] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 52.605495] RX: IEEE802.1X EAPOL frame!
[ 52.617313] RX: IEEE802.1X EAPOL frame!
[ 52.617379] alg name:CCMP
[ 52.617396] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 52.618000] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 52.618005] alg name:TKIP
[ 52.619920] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 52.619926] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 52.620531] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 52.620577] disauth packet !
[ 57.758709] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 57.758712] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 57.758714] HW_VAR_MRC: Turn on 1T1R MRC!
[ 59.201626] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 59.201636] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 59.201657] rtllib_associate_procedure_wq(), chan:1
[ 59.201659] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 59.211689] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 59.216656] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 59.219564] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 59.219567] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 59.219568] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 59.219570] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 59.219572] Associated successfully
[ 59.219573] normal associate
[ 59.219578] Using G rates:108
[ 59.219580] Successfully associated, ht not enabled(0, 0)
[ 59.219587] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 59.224931] RX: IEEE802.1X EAPOL frame!
[ 59.234262] RX: IEEE802.1X EAPOL frame!
[ 59.234332] alg name:CCMP
[ 59.234352] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 59.234955] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 59.234961] alg name:TKIP
[ 59.236882] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 59.236888] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 59.237494] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 59.237540] disauth packet !
[ 64.376000] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 64.376010] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 64.376012] HW_VAR_MRC: Turn on 1T1R MRC!
[ 65.819555] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 65.819565] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 65.819587] rtllib_associate_procedure_wq(), chan:1
[ 65.819589] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 65.829616] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 65.831459] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 65.834408] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 65.834411] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 65.834413] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 65.834414] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 65.834416] Associated successfully
[ 65.834418] normal associate
[ 65.834422] Using G rates:108
[ 65.834423] Successfully associated, ht not enabled(0, 0)
[ 65.834427] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 65.840462] RX: IEEE802.1X EAPOL frame!
[ 65.851537] RX: IEEE802.1X EAPOL frame!
[ 65.851604] alg name:CCMP
[ 65.851622] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 65.852226] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 65.852232] alg name:TKIP
[ 65.854161] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 65.854168] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 65.854772] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 65.854817] disauth packet !
[ 70.992946] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 70.992950] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 70.992951] HW_VAR_MRC: Turn on 1T1R MRC!
[ 72.440034] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 72.440045] rtllib_associate_procedure_wq(), chan:1
[ 72.440047] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 72.450076] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 72.450349] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 72.450720] rtllib_associate_procedure_wq(), chan:1
[ 72.450723] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 72.460751] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 72.462223] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 72.466875] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 72.466877] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 72.466879] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 72.466881] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 72.466882] Associated successfully
[ 72.466884] normal associate
[ 72.466888] Using G rates:108
[ 72.466890] Successfully associated, ht not enabled(0, 0)
[ 72.466895] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 72.468540] RX: IEEE802.1X EAPOL frame!
[ 72.478870] RX: IEEE802.1X EAPOL frame!
[ 72.478935] alg name:CCMP
[ 72.478952] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 72.479556] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 72.479689] alg name:TKIP
[ 72.481561] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 72.481567] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 72.482172] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 72.482219] disauth packet !
[ 76.169665] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 76.169669] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 76.169671] HW_VAR_MRC: Turn on 1T1R MRC!
[ 79.059149] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 79.059158] rtllib_associate_procedure_wq(), chan:1
[ 79.059160] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 79.069189] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 79.069396] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 79.077049] rtllib_associate_procedure_wq(), chan:1
[ 79.077052] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 79.087079] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 79.092018] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 79.094932] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 79.094935] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 79.094937] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 79.094939] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 79.094941] Associated successfully
[ 79.094942] normal associate
[ 79.094949] Using G rates:108
[ 79.094950] Successfully associated, ht not enabled(0, 0)
[ 79.094955] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 79.096587] RX: IEEE802.1X EAPOL frame!
[ 79.106385] RX: IEEE802.1X EAPOL frame!
[ 79.106505] alg name:CCMP
[ 79.106524] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 79.107129] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 79.107135] alg name:TKIP
[ 79.116702] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 79.116709] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 79.117336] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 79.117387] disauth packet !
[ 79.266713] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 79.266717] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 79.266719] HW_VAR_MRC: Turn on 1T1R MRC!
[ 79.268448] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 79.410931] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 79.410934] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 79.410936] HW_VAR_MRC: Turn on 1T1R MRC!
[ 79.434062] r8169 0000:03:00.0: eth0: link down
[ 79.434345] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 79.583822] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 79.583825] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 79.583826] HW_VAR_MRC: Turn on 1T1R MRC!
[ 79.585601] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 80.590341] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 80.590345] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 80.590347] HW_VAR_MRC: Turn on 1T1R MRC!
[ 80.733254] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 80.733258] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 80.733259] HW_VAR_MRC: Turn on 1T1R MRC!
[ 80.734786] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 80.759427] r8169 0000:03:00.0: eth0: link down
[ 80.759709] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 81.772697] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 81.772700] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 81.772702] HW_VAR_MRC: Turn on 1T1R MRC!
[ 81.778708] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 81.785165] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 81.788913] rtllib_associate_procedure_wq(), chan:1
[ 81.788917] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 81.798946] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 81.800802] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 81.803325] Association response status code 0xc
[ 81.803339] rtllib_associate_procedure_wq(), chan:1
[ 81.803340] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 81.813366] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 81.815210] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 81.817721] Association response status code 0xc
[ 81.817734] rtllib_associate_procedure_wq(), chan:1
[ 81.817735] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 81.827760] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 81.829578] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 81.832098] Association response status code 0xc
[ 81.838027] rtllib_associate_procedure_wq(), chan:1
[ 81.838028] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 81.848053] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 81.849885] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 81.852426] Association response status code 0xc
[ 81.852440] rtllib_associate_procedure_wq(), chan:1
[ 81.852442] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 81.862467] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 81.868035] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 81.871257] Association response status code 0xc
[ 81.871269] rtllib_associate_procedure_wq(), chan:1
[ 81.871271] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 81.881295] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 81.883113] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 81.885649] Association response status code 0xc
[ 81.992040] ============>sync_scan_hurryup out
[ 81.992091] rtllib_associate_procedure_wq(), chan:1
[ 81.992093] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 82.002118] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 82.002432] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 82.002441] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 82.002470] rtllib_associate_procedure_wq(), chan:1
[ 82.002472] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 82.012499] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 82.014331] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 82.018124] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 82.018127] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 82.018128] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 82.018130] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 82.018132] Associated successfully
[ 82.018133] normal associate
[ 82.018138] Using G rates:108
[ 82.018139] Successfully associated, ht not enabled(0, 0)
[ 82.018144] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 82.019455] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 82.020010] RX: IEEE802.1X EAPOL frame!
[ 82.030952] RX: IEEE802.1X EAPOL frame!
[ 82.031047] alg name:CCMP
[ 82.031064] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 82.031667] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 82.031673] alg name:TKIP
[ 82.033610] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 82.033617] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 82.034232] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 82.034295] disauth packet !
[ 87.172606] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 87.172610] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 87.172611] HW_VAR_MRC: Turn on 1T1R MRC!
[ 88.614199] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 88.614208] rtllib_associate_procedure_wq(), chan:1
[ 88.614210] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 88.624235] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 88.624424] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 88.624823] rtllib_associate_procedure_wq(), chan:1
[ 88.624826] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 88.634854] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 88.636700] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 88.639630] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 88.639632] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 88.639634] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 88.639636] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 88.639638] Associated successfully
[ 88.639639] normal associate
[ 88.639644] Using G rates:108
[ 88.639646] Successfully associated, ht not enabled(0, 0)
[ 88.639650] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 88.647462] RX: IEEE802.1X EAPOL frame!
[ 88.658355] RX: IEEE802.1X EAPOL frame!
[ 88.658418] alg name:CCMP
[ 88.658435] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 88.659040] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 88.659173] alg name:TKIP
[ 88.661062] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 88.661068] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 88.661672] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 88.661717] disauth packet !
[ 92.994036] wlan0: no IPv6 routers present
[ 93.799859] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 93.799862] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 93.799863] HW_VAR_MRC: Turn on 1T1R MRC!
[ 95.242213] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 95.242222] rtllib_associate_procedure_wq(), chan:1
[ 95.242224] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 95.252251] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 95.252612] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 95.252620] rtllib_associate_procedure_wq(), chan:1
[ 95.252622] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 95.262648] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 95.264486] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 95.267424] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 95.267426] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 95.267428] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 95.267430] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 95.267432] Associated successfully
[ 95.267433] normal associate
[ 95.267439] Using G rates:108
[ 95.267441] Successfully associated, ht not enabled(0, 0)
[ 95.267446] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 95.274973] RX: IEEE802.1X EAPOL frame!
[ 95.285847] RX: IEEE802.1X EAPOL frame!
[ 95.285953] alg name:CCMP
[ 95.285962] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 95.286566] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 95.286572] alg name:TKIP
[ 95.288531] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 95.288537] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 95.289143] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 95.289190] disauth packet !
[ 100.427329] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 100.427332] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 100.427334] HW_VAR_MRC: Turn on 1T1R MRC!
[ 101.887230] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 101.887240] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 101.892360] rtllib_associate_procedure_wq(), chan:1
[ 101.892363] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 101.902393] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 101.904226] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 101.907205] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 101.907208] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 101.907209] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 101.907211] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 101.907213] Associated successfully
[ 101.907214] normal associate
[ 101.907220] Using G rates:108
[ 101.907222] Successfully associated, ht not enabled(0, 0)
[ 101.907226] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 101.912461] RX: IEEE802.1X EAPOL frame!
[ 101.923324] RX: IEEE802.1X EAPOL frame!
[ 101.923393] alg name:CCMP
[ 101.923411] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 101.924016] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 101.924022] alg name:TKIP
[ 101.925958] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 101.925964] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 101.926570] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 101.926613] disauth packet !
[ 107.064751] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 107.064754] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 107.064755] HW_VAR_MRC: Turn on 1T1R MRC!
[ 108.507215] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 108.507223] rtllib_associate_procedure_wq(), chan:1
[ 108.507225] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 108.517252] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 108.517489] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 108.517914] rtllib_associate_procedure_wq(), chan:1
[ 108.517917] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 108.527944] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 108.531266] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 108.534174] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 108.534176] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 108.534178] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 108.534180] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 108.534182] Associated successfully
[ 108.534183] normal associate
[ 108.534189] Using G rates:108
[ 108.534190] Successfully associated, ht not enabled(0, 0)
[ 108.534195] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 108.539949] RX: IEEE802.1X EAPOL frame!
[ 108.551054] RX: IEEE802.1X EAPOL frame!
[ 108.551151] alg name:CCMP
[ 108.551168] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 108.551772] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 108.551778] alg name:TKIP
[ 108.553787] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 108.553794] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 108.554400] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 108.554446] disauth packet !
[ 109.457687] chown used greatest stack depth: 3392 bytes left
[ 113.692579] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 113.692582] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 113.692584] HW_VAR_MRC: Turn on 1T1R MRC!
[ 115.134221] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 115.134230] rtllib_associate_procedure_wq(), chan:1
[ 115.134232] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 115.144257] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 115.144451] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 115.144865] rtllib_associate_procedure_wq(), chan:1
[ 115.144868] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 115.154895] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 115.157155] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 115.160109] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 115.160112] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 115.160113] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 115.160115] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 115.160117] Associated successfully
[ 115.160118] normal associate
[ 115.160123] Using G rates:108
[ 115.160125] Successfully associated, ht not enabled(0, 0)
[ 115.160130] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 115.167432] RX: IEEE802.1X EAPOL frame!
[ 115.169249] RX: IEEE802.1X EAPOL frame!
[ 115.179049] RX: IEEE802.1X EAPOL frame!
[ 115.179114] alg name:CCMP
[ 115.179133] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 115.179736] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 115.179742] alg name:TKIP
[ 115.181689] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 115.181695] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 115.182301] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 115.182346] disauth packet !
[ 120.320453] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 120.320456] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 120.320458] HW_VAR_MRC: Turn on 1T1R MRC!
[ 121.768359] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 121.768368] rtllib_associate_procedure_wq(), chan:1
[ 121.768370] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 121.778400] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 121.778628] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 121.782626] rtllib_associate_procedure_wq(), chan:1
[ 121.782629] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 121.792659] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 121.794120] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 121.799425] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 121.799428] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 121.799430] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 121.799432] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 121.799434] Associated successfully
[ 121.799435] normal associate
[ 121.799442] Using G rates:108
[ 121.799444] Successfully associated, ht not enabled(0, 0)
[ 121.799450] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 121.804954] RX: IEEE802.1X EAPOL frame!
[ 121.815802] RX: IEEE802.1X EAPOL frame!
[ 121.815899] alg name:CCMP
[ 121.815917] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 121.816521] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 121.816715] alg name:TKIP
[ 121.818584] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 121.818590] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 121.819195] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 121.819243] disauth packet !
[ 126.168469] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 126.168472] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 126.168474] HW_VAR_MRC: Turn on 1T1R MRC!
[ 129.058172] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 129.058181] rtllib_associate_procedure_wq(), chan:1
[ 129.058183] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 129.068210] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 129.068418] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 129.076028] rtllib_associate_procedure_wq(), chan:1
[ 129.076030] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 129.086057] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 129.088010] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 129.091075] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 129.091077] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 129.091079] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 129.091081] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 129.091083] Associated successfully
[ 129.091084] normal associate
[ 129.091089] Using G rates:108
[ 129.091091] Successfully associated, ht not enabled(0, 0)
[ 129.091096] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 129.101796] RX: IEEE802.1X EAPOL frame!
[ 129.112031] RX: IEEE802.1X EAPOL frame!
[ 129.112110] alg name:CCMP
[ 129.112127] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 129.112731] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 129.112737] alg name:TKIP
[ 129.125852] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 129.125858] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 129.126464] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 129.126510] disauth packet !
[ 129.299229] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 129.299232] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 129.299234] HW_VAR_MRC: Turn on 1T1R MRC!
[ 129.300714] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 129.443090] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 129.443094] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 129.443095] HW_VAR_MRC: Turn on 1T1R MRC!
[ 129.465737] r8169 0000:03:00.0: eth0: link down
[ 129.466083] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 129.614874] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 129.614877] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 129.614879] HW_VAR_MRC: Turn on 1T1R MRC!
[ 129.616669] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 130.625664] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 130.625668] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 130.625669] HW_VAR_MRC: Turn on 1T1R MRC!
[ 130.767971] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 130.767975] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 130.767977] HW_VAR_MRC: Turn on 1T1R MRC!
[ 130.769697] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 130.793854] r8169 0000:03:00.0: eth0: link down
[ 130.794262] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 131.792910] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 131.792913] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 131.792915] HW_VAR_MRC: Turn on 1T1R MRC!
[ 131.798844] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 131.805081] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 131.808727] rtllib_associate_procedure_wq(), chan:1
[ 131.808731] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 131.818761] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 131.820616] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 131.823157] Association response status code 0xc
[ 131.823171] rtllib_associate_procedure_wq(), chan:1
[ 131.823173] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 131.833198] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 131.835042] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 131.837551] Association response status code 0xc
[ 131.837565] rtllib_associate_procedure_wq(), chan:1
[ 131.837567] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 131.847591] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 131.849422] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 131.851947] Association response status code 0xc
[ 131.851960] rtllib_associate_procedure_wq(), chan:1
[ 131.851962] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 131.861986] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 131.865868] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 131.868378] Association response status code 0xc
[ 131.868391] rtllib_associate_procedure_wq(), chan:1
[ 131.868393] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 131.878417] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 131.880263] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 131.882782] Association response status code 0xc
[ 131.882794] rtllib_associate_procedure_wq(), chan:1
[ 131.882796] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 131.892820] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 131.895870] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 131.898377] Association response status code 0xc
[ 132.004023] ============>sync_scan_hurryup out
[ 132.004079] rtllib_associate_procedure_wq(), chan:1
[ 132.004081] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 132.014106] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 132.014441] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 132.014449] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 132.014480] rtllib_associate_procedure_wq(), chan:1
[ 132.014482] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 132.024508] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 132.026338] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 132.029274] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 132.029276] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 132.029278] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 132.029280] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 132.029281] Associated successfully
[ 132.029282] normal associate
[ 132.029287] Using G rates:108
[ 132.029288] Successfully associated, ht not enabled(0, 0)
[ 132.029293] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 132.030604] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 132.035628] RX: IEEE802.1X EAPOL frame!
[ 132.046477] RX: IEEE802.1X EAPOL frame!
[ 132.046561] alg name:CCMP
[ 132.046578] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 132.047183] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 132.047189] alg name:TKIP
[ 132.049153] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 132.049160] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 132.049764] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 132.049825] disauth packet !
[ 137.188130] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 137.188134] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 137.188136] HW_VAR_MRC: Turn on 1T1R MRC!
[ 138.631221] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 138.631231] rtllib_associate_procedure_wq(), chan:1
[ 138.631232] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 138.641259] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 138.641477] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 138.641879] rtllib_associate_procedure_wq(), chan:1
[ 138.641882] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 138.651911] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 138.654448] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 138.657420] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 138.657422] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 138.657424] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 138.657426] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 138.657428] Associated successfully
[ 138.657429] normal associate
[ 138.657434] Using G rates:108
[ 138.657435] Successfully associated, ht not enabled(0, 0)
[ 138.657440] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 138.663102] RX: IEEE802.1X EAPOL frame!
[ 138.675091] RX: IEEE802.1X EAPOL frame!
[ 138.675159] alg name:CCMP
[ 138.675176] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 138.675779] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 138.675785] alg name:TKIP
[ 138.677745] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 138.677752] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 138.678357] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 138.678403] disauth packet !
[ 142.722039] wlan0: no IPv6 routers present
[ 143.816553] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 143.816556] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 143.816558] HW_VAR_MRC: Turn on 1T1R MRC!
[ 145.259207] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 145.259216] rtllib_associate_procedure_wq(), chan:1
[ 145.259218] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 145.269242] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 145.269456] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 145.269846] rtllib_associate_procedure_wq(), chan:1
[ 145.269848] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 145.279876] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 145.281725] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 145.284653] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 145.284655] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 145.284657] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 145.284659] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 145.284661] Associated successfully
[ 145.284662] normal associate
[ 145.284667] Using G rates:108
[ 145.284668] Successfully associated, ht not enabled(0, 0)
[ 145.284672] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 145.290596] RX: IEEE802.1X EAPOL frame!
[ 145.301507] RX: IEEE802.1X EAPOL frame!
[ 145.301573] alg name:CCMP
[ 145.301590] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 145.302194] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 145.302326] alg name:TKIP
[ 145.304200] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 145.304206] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 145.304810] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 145.304852] disauth packet !
[ 150.442996] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 150.442999] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 150.443008] HW_VAR_MRC: Turn on 1T1R MRC!
[ 151.890537] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 151.890547] Linking with cnc_west,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40a
[ 151.890569] rtllib_associate_procedure_wq(), chan:1
[ 151.890571] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 151.900600] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 151.902435] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 151.905379] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 151.905382] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 151.905384] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 151.905386] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 151.905388] Associated successfully
[ 151.905389] normal associate
[ 151.905396] Using G rates:108
[ 151.905397] Successfully associated, ht not enabled(0, 0)
[ 151.905403] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 151.909579] RX: IEEE802.1X EAPOL frame!
[ 151.919598] RX: IEEE802.1X EAPOL frame!
[ 151.919708] alg name:CCMP
[ 151.919717] r8192_wx_set_enc_ext() group:0, alg:4, last_pairwise_key_type:0, key_len:16
[ 151.920322] set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0
[ 151.920328] alg name:TKIP
[ 151.923822] rtllib_crypt_tkip: could not allocate crypto API michael_mic
[ 151.923829] r8192_wx_set_enc_ext() group:1, alg:2, last_pairwise_key_type:4, key_len:32
[ 151.924434] set_swcam():EntryNo is 2,KeyIndex is 2,KeyType is 2,is_mesh is 0
[ 151.924482] disauth packet !
[ 153.441581] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 153.441584] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 153.441586] HW_VAR_MRC: Turn on 1T1R MRC!
[ 153.584662] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 153.584665] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 153.584667] HW_VAR_MRC: Turn on 1T1R MRC!
[ 153.585318] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 153.612006] r8169 0000:03:00.0: eth0: link down
[ 153.612408] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 153.790968] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 153.790971] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 153.790973] HW_VAR_MRC: Turn on 1T1R MRC!
[ 153.797718] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 153.950030] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 153.950034] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 153.950035] HW_VAR_MRC: Turn on 1T1R MRC!
[ 154.105461] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 154.105465] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 154.105467] HW_VAR_MRC: Turn on 1T1R MRC!
[ 154.116525] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 154.141138] r8169 0000:03:00.0: eth0: link down
[ 154.141422] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 156.259289] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 156.259292] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 156.259294] HW_VAR_MRC: Turn on 1T1R MRC!
[ 156.266459] Linking with linuxisbroken,channel:1, qos:1, myHT:0, networkHT:0, mode:4 cur_net.flags:0x40b
[ 156.266472] rtllib_associate_procedure_wq(), chan:1
[ 156.266474] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 156.276503] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 11,ieee->qos_capability is 1
[ 156.278344] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[ 156.281187] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[ 156.281190] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[ 156.281192] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[ 156.281194] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[ 156.281196] Associated successfully
[ 156.281197] normal associate
[ 156.281204] Using G rates:108
[ 156.281205] Successfully associated, ht not enabled(0, 0)
[ 156.281210] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5
[ 156.282486] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 156.419822] DHCP pkt src port:68, dest port:67!!
[ 158.176001] dm_check_edca_turbo():iot peer is unknown, bssid:9a:fc:11:47:d3:65
[ 158.664499] DHCP pkt src port:68, dest port:67!!
[ 166.698020] wlan0: no IPv6 routers present
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [gentoo-laptop] Wireless Authentication Failure -- WPA2-PSK(TKIP+AES), rtl8192se
2011-05-16 3:23 [gentoo-laptop] Wireless Authentication Failure -- WPA2-PSK(TKIP+AES), rtl8192se Corey Richardson
@ 2011-05-16 6:27 ` Lie Ryan
2011-05-16 11:11 ` Corey Richardson
0 siblings, 1 reply; 3+ messages in thread
From: Lie Ryan @ 2011-05-16 6:27 UTC (permalink / raw
To: gentoo-laptop
[-- Attachment #1: Type: text/plain, Size: 1120 bytes --]
On May 16, 2011 2:06 PM, "Corey Richardson" <kb1pkl@aim.com> wrote:
>
> I have been unable to authenticate to my WAP. From the subject you can
> see the authentication it normally uses. I tried bunches of other
> combinations but I can only connect when the network is Unprotected. I
> have an rtl8192se, the driver is built into the kernel and I have the
> rtl8192se and rtl8192se-firmware packages. I am led to believe this
> isn't a driver issue. I use wpa_supplicant with wicd. The oddest part is
> it worked fine yesterday when I shut off the laptop, and now it doesn't
> work. I've re-emerged wicd and friends, rebuilt the kernel, made sure
> options were checked in the kernel config, etc.
>
> What more should I do, and is there any more information I need to
> include? Attached are a few logs. I couldn't find any logs for
> wpa_supplicant, however.
A few days ago on 2011/05/08, I had a message that my system is going to be
migrated to baselayout-2 and openrc, and a bunch of configurations files had
moved around and including net configuration files. Have you checked your
eselect news and do etc-update?
[-- Attachment #2: Type: text/html, Size: 1317 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [gentoo-laptop] Wireless Authentication Failure -- WPA2-PSK(TKIP+AES), rtl8192se
2011-05-16 6:27 ` Lie Ryan
@ 2011-05-16 11:11 ` Corey Richardson
0 siblings, 0 replies; 3+ messages in thread
From: Corey Richardson @ 2011-05-16 11:11 UTC (permalink / raw
To: gentoo-laptop
On 05/16/2011 02:27 AM, Lie Ryan wrote:
> A few days ago on 2011/05/08, I had a message that my system is going to be
> migrated to baselayout-2 and openrc, and a bunch of configurations files had
> moved around and including net configuration files. Have you checked your
> eselect news and do etc-update?
>
Yes I have, the upgrade was successful and my config files were all
modified accordingly. I noticed the line
"rtllib_crypt_tkip: could not allocate crypto API michael_mic"
so I'll go through the kernel and enable a bunch of the options under
Cryptography API, see if that fixes the issue.
--
Corey Richardson
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-05-16 12:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-16 3:23 [gentoo-laptop] Wireless Authentication Failure -- WPA2-PSK(TKIP+AES), rtl8192se Corey Richardson
2011-05-16 6:27 ` Lie Ryan
2011-05-16 11:11 ` Corey Richardson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox