[gentoo-laptop] Sensors

[gentoo-laptop] Sensors

[Mads Samsing]

Hey everyone

Finally lm-sensors works for me. But if I write the command: sensors -s,
the computer halts and nothing more happen.
The command: sensors, gives me the temperature.

It is not really a problem, I am just wondering why?
According to a guide I found on this, sensors -s, shouldn't give any
problems. (It is a Transmeta TM-5800/ECS iBuddie A530).

Another thing, though it isn't really supposed to be posted here, so I
won't blame anyone for not answering: I use Mutt/fetchmail/procmail.
All mails should be put into ~/mail/, which they are, but an empty
~/.maildir is created as well. Is it procmail or fetchmail that causes
this, and how can it be changed?

-- 

Venlig hilsen/Best regards,
Mads Samsing [mads.samsing [AT] webspeed.dk]

	Got virus? Try this: format c:

-- 
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] Sensors

[Ovidiu Bivolaru]

Hi,

 The .maildir is created in every user's home dir because "adduser"
command will copy /etc/skel/* in every new home dir (depends which
parameter you use for adduser). Also, mutt is trying to read mail from
$HOME/.maildir due to the following entries from /etc/mutt/Muttrc
set mbox_type=Maildir
set folder=~/.maildir
set spoolfile=~/.maildir/
set record=~/.maildir-sent/
I guess you want to change these to ~/.mail/ and also change mbox_type
if you are not using Maildir. This can be done in ~/.muttrc as well. If
you are not using Maildir, also make sure you don't have "maildir" in
USE flags.

Regards,
Ovidiu

Mads Samsing wrote:

>Hey everyone
>
>Finally lm-sensors works for me. But if I write the command: sensors -s,
>the computer halts and nothing more happen.
>The command: sensors, gives me the temperature.
>
>It is not really a problem, I am just wondering why?
>According to a guide I found on this, sensors -s, shouldn't give any
>problems. (It is a Transmeta TM-5800/ECS iBuddie A530).
>
>Another thing, though it isn't really supposed to be posted here, so I
>won't blame anyone for not answering: I use Mutt/fetchmail/procmail.
>All mails should be put into ~/mail/, which they are, but an empty
>~/.maildir is created as well. Is it procmail or fetchmail that causes
>this, and how can it be changed?
>
>  
>

-- 
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] Sensors

[Mads Samsing]

Thanks, but ...

I am using maildir, and the entries in /etc/mutt/Muttrc has been changed
in my .muttrc, and shouldn't be a problem.

I have actually changed them in /etc/mutt/Muttrc as well.

> Hi,
> 
>  The .maildir is created in every user's home dir because "adduser"
> command will copy /etc/skel/* in every new home dir (depends which
> parameter you use for adduser). Also, mutt is trying to read mail from
> $HOME/.maildir due to the following entries from /etc/mutt/Muttrc
> set mbox_type=Maildir
> set folder=~/.maildir
> set spoolfile=~/.maildir/
> set record=~/.maildir-sent/
> I guess you want to change these to ~/.mail/ and also change mbox_type
> if you are not using Maildir. This can be done in ~/.muttrc as well. If
> you are not using Maildir, also make sure you don't have "maildir" in
> USE flags.
> 
> Regards,
> Ovidiu
> 
> Mads Samsing wrote:
> 
> >Hey everyone
> >
> >Finally lm-sensors works for me. But if I write the command: sensors -s,
> >the computer halts and nothing more happen.
> >The command: sensors, gives me the temperature.
> >
> >It is not really a problem, I am just wondering why?
> >According to a guide I found on this, sensors -s, shouldn't give any
> >problems. (It is a Transmeta TM-5800/ECS iBuddie A530).
> >
> >Another thing, though it isn't really supposed to be posted here, so I
> >won't blame anyone for not answering: I use Mutt/fetchmail/procmail.
> >All mails should be put into ~/mail/, which they are, but an empty
> >~/.maildir is created as well. Is it procmail or fetchmail that causes
> >this, and how can it be changed?
> >
> >  
> >
> 
> -- 
> gentoo-laptop@gentoo.org mailing list
> 

-- 

Venlig hilsen/Best regards,
Mads Samsing [mads.samsing [AT] webspeed.dk]

	Got virus? Try this: format c:

-- 
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] Sensors

[Ovidiu Bivolaru]

I guess you need to check your MTA, procmail, fetchmail config files as
well.

Mads Samsing wrote:

>Thanks, but ...
>
>I am using maildir, and the entries in /etc/mutt/Muttrc has been changed
>in my .muttrc, and shouldn't be a problem.
>
>I have actually changed them in /etc/mutt/Muttrc as well.
>
>  
>
>>Hi,
>>
>> The .maildir is created in every user's home dir because "adduser"
>>command will copy /etc/skel/* in every new home dir (depends which
>>parameter you use for adduser). Also, mutt is trying to read mail from
>>$HOME/.maildir due to the following entries from /etc/mutt/Muttrc
>>set mbox_type=Maildir
>>set folder=~/.maildir
>>set spoolfile=~/.maildir/
>>set record=~/.maildir-sent/
>>I guess you want to change these to ~/.mail/ and also change mbox_type
>>if you are not using Maildir. This can be done in ~/.muttrc as well. If
>>you are not using Maildir, also make sure you don't have "maildir" in
>>USE flags.
>>
>>Regards,
>>Ovidiu
>>
>>Mads Samsing wrote:
>>
>>    
>>
>>>Hey everyone
>>>
>>>Finally lm-sensors works for me. But if I write the command: sensors -s,
>>>the computer halts and nothing more happen.
>>>The command: sensors, gives me the temperature.
>>>
>>>It is not really a problem, I am just wondering why?
>>>According to a guide I found on this, sensors -s, shouldn't give any
>>>problems. (It is a Transmeta TM-5800/ECS iBuddie A530).
>>>
>>>Another thing, though it isn't really supposed to be posted here, so I
>>>won't blame anyone for not answering: I use Mutt/fetchmail/procmail.
>>>All mails should be put into ~/mail/, which they are, but an empty
>>>~/.maildir is created as well. Is it procmail or fetchmail that causes
>>>this, and how can it be changed?
>>>
>>> 
>>>
>>>      
>>>
>>-- 
>>gentoo-laptop@gentoo.org mailing list
>>
>>    
>>
>
>  
>

-- 
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] Sensors

[Mads Samsing]

I couldn't find anything that could be changed. Therefore I just made
~/.maildir my maildir instead of ~/mail/.

The easiest solution.

But thank you

On 18. April @ 22:13, Ovidiu Bivolaru wrote:
> I guess you need to check your MTA, procmail, fetchmail config files as
> well.
> 
> Mads Samsing wrote:
> 
> >Thanks, but ...
> >
> >I am using maildir, and the entries in /etc/mutt/Muttrc has been changed
> >in my .muttrc, and shouldn't be a problem.
> >
> >I have actually changed them in /etc/mutt/Muttrc as well.
> >
> >  
> >
> >>Hi,
> >>
> >> The .maildir is created in every user's home dir because "adduser"
> >>command will copy /etc/skel/* in every new home dir (depends which
> >>parameter you use for adduser). Also, mutt is trying to read mail from
> >>$HOME/.maildir due to the following entries from /etc/mutt/Muttrc
> >>set mbox_type=Maildir
> >>set folder=~/.maildir
> >>set spoolfile=~/.maildir/
> >>set record=~/.maildir-sent/
> >>I guess you want to change these to ~/.mail/ and also change mbox_type
> >>if you are not using Maildir. This can be done in ~/.muttrc as well. If
> >>you are not using Maildir, also make sure you don't have "maildir" in
> >>USE flags.
> >>
> >>Regards,
> >>Ovidiu
> >>
> >>Mads Samsing wrote:
> >>
> >>    
> >>
> >>>Hey everyone
> >>>
> >>>Finally lm-sensors works for me. But if I write the command: sensors -s,
> >>>the computer halts and nothing more happen.
> >>>The command: sensors, gives me the temperature.
> >>>
> >>>It is not really a problem, I am just wondering why?
> >>>According to a guide I found on this, sensors -s, shouldn't give any
> >>>problems. (It is a Transmeta TM-5800/ECS iBuddie A530).
> >>>
> >>>Another thing, though it isn't really supposed to be posted here, so I
> >>>won't blame anyone for not answering: I use Mutt/fetchmail/procmail.
> >>>All mails should be put into ~/mail/, which they are, but an empty
> >>>~/.maildir is created as well. Is it procmail or fetchmail that causes
> >>>this, and how can it be changed?
> >>>
> >>> 
> >>>
> >>>      
> >>>
> >>-- 
> >>gentoo-laptop@gentoo.org mailing list
> >>
> >>    
> >>
> >
> >  
> >
> 
> -- 
> gentoo-laptop@gentoo.org mailing list
> 

-- 

Venlig hilsen/Best regards,
Mads Samsing [mads.samsing [AT] webspeed.dk]

	Got virus? Try this: format c:

-- 
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] Sensors

[Ovidiu Bivolaru]

which MTA are you using ? Qmail ? Postfix ? Sendmail ?

Mads Samsing wrote:

>I couldn't find anything that could be changed. Therefore I just made
>~/.maildir my maildir instead of ~/mail/.
>
>The easiest solution.
>
>But thank you
>
>On 18. April @ 22:13, Ovidiu Bivolaru wrote:
>  
>
>>I guess you need to check your MTA, procmail, fetchmail config files as
>>well.
>>
>>Mads Samsing wrote:
>>
>>    
>>
>>>Thanks, but ...
>>>
>>>I am using maildir, and the entries in /etc/mutt/Muttrc has been changed
>>>in my .muttrc, and shouldn't be a problem.
>>>
>>>I have actually changed them in /etc/mutt/Muttrc as well.
>>>
>>> 
>>>
>>>      
>>>
>>>>Hi,
>>>>
>>>>The .maildir is created in every user's home dir because "adduser"
>>>>command will copy /etc/skel/* in every new home dir (depends which
>>>>parameter you use for adduser). Also, mutt is trying to read mail from
>>>>$HOME/.maildir due to the following entries from /etc/mutt/Muttrc
>>>>set mbox_type=Maildir
>>>>set folder=~/.maildir
>>>>set spoolfile=~/.maildir/
>>>>set record=~/.maildir-sent/
>>>>I guess you want to change these to ~/.mail/ and also change mbox_type
>>>>if you are not using Maildir. This can be done in ~/.muttrc as well. If
>>>>you are not using Maildir, also make sure you don't have "maildir" in
>>>>USE flags.
>>>>
>>>>Regards,
>>>>Ovidiu
>>>>
>>>>Mads Samsing wrote:
>>>>
>>>>   
>>>>
>>>>        
>>>>
>>>>>Hey everyone
>>>>>
>>>>>Finally lm-sensors works for me. But if I write the command: sensors -s,
>>>>>the computer halts and nothing more happen.
>>>>>The command: sensors, gives me the temperature.
>>>>>
>>>>>It is not really a problem, I am just wondering why?
>>>>>According to a guide I found on this, sensors -s, shouldn't give any
>>>>>problems. (It is a Transmeta TM-5800/ECS iBuddie A530).
>>>>>
>>>>>Another thing, though it isn't really supposed to be posted here, so I
>>>>>won't blame anyone for not answering: I use Mutt/fetchmail/procmail.
>>>>>All mails should be put into ~/mail/, which they are, but an empty
>>>>>~/.maildir is created as well. Is it procmail or fetchmail that causes
>>>>>this, and how can it be changed?
>>>>>
>>>>>
>>>>>
>>>>>     
>>>>>
>>>>>          
>>>>>
>>>>-- 
>>>>gentoo-laptop@gentoo.org mailing list
>>>>
>>>>   
>>>>
>>>>        
>>>>
>>> 
>>>
>>>      
>>>
>>-- 
>>gentoo-laptop@gentoo.org mailing list
>>
>>    
>>
>
>  
>

-- 
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] Sensors

[Mads Samsing]

The only packages from mail-mta, that I have installed are nbsmtp and
ssmtp. ssmtp came with vixie-cron.

On 18. April @ 22:46, Ovidiu Bivolaru wrote:
> which MTA are you using ? Qmail ? Postfix ? Sendmail ?
> 
> Mads Samsing wrote:
> 
> >I couldn't find anything that could be changed. Therefore I just made
> >~/.maildir my maildir instead of ~/mail/.
> >
> >The easiest solution.
> >
> >But thank you
> >
> >On 18. April @ 22:13, Ovidiu Bivolaru wrote:
> >  
> >
> >>I guess you need to check your MTA, procmail, fetchmail config files as
> >>well.
> >>
> >>Mads Samsing wrote:
> >>
> >>    
> >>
> >>>Thanks, but ...
> >>>
> >>>I am using maildir, and the entries in /etc/mutt/Muttrc has been changed
> >>>in my .muttrc, and shouldn't be a problem.
> >>>
> >>>I have actually changed them in /etc/mutt/Muttrc as well.
> >>>
> >>> 
> >>>
> >>>      
> >>>
> >>>>Hi,
> >>>>
> >>>>The .maildir is created in every user's home dir because "adduser"
> >>>>command will copy /etc/skel/* in every new home dir (depends which
> >>>>parameter you use for adduser). Also, mutt is trying to read mail from
> >>>>$HOME/.maildir due to the following entries from /etc/mutt/Muttrc
> >>>>set mbox_type=Maildir
> >>>>set folder=~/.maildir
> >>>>set spoolfile=~/.maildir/
> >>>>set record=~/.maildir-sent/
> >>>>I guess you want to change these to ~/.mail/ and also change mbox_type
> >>>>if you are not using Maildir. This can be done in ~/.muttrc as well. If
> >>>>you are not using Maildir, also make sure you don't have "maildir" in
> >>>>USE flags.
> >>>>
> >>>>Regards,
> >>>>Ovidiu
> >>>>
> >>>>Mads Samsing wrote:
> >>>>
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>>>>Hey everyone
> >>>>>
> >>>>>Finally lm-sensors works for me. But if I write the command: sensors -s,
> >>>>>the computer halts and nothing more happen.
> >>>>>The command: sensors, gives me the temperature.
> >>>>>
> >>>>>It is not really a problem, I am just wondering why?
> >>>>>According to a guide I found on this, sensors -s, shouldn't give any
> >>>>>problems. (It is a Transmeta TM-5800/ECS iBuddie A530).
> >>>>>
> >>>>>Another thing, though it isn't really supposed to be posted here, so I
> >>>>>won't blame anyone for not answering: I use Mutt/fetchmail/procmail.
> >>>>>All mails should be put into ~/mail/, which they are, but an empty
> >>>>>~/.maildir is created as well. Is it procmail or fetchmail that causes
> >>>>>this, and how can it be changed?
> >>>>>
> >>>>>
> >>>>>
> >>>>>     
> >>>>>
> >>>>>          
> >>>>>
> >>>>-- 
> >>>>gentoo-laptop@gentoo.org mailing list
> >>>>
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>> 
> >>>
> >>>      
> >>>
> >>-- 
> >>gentoo-laptop@gentoo.org mailing list
> >>
> >>    
> >>
> >
> >  
> >
> 
> -- 
> gentoo-laptop@gentoo.org mailing list
> 

-- 

Venlig hilsen/Best regards,
Mads Samsing [mads.samsing [AT] webspeed.dk]

	Got virus? Try this: format c:

-- 
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] Sensors

[Ovidiu Bivolaru]

well. you could remove ssmtp/nbsmtp and install a real MTA: QMail or
Postfix (they do support maildir).
But I could not guarantee that this would solve the problem. I guess it
is not a big deal that .maildir is created as long as mails are
delivered correctly in ~/.mail :)
Make sure that you have in /etc/procmailrc:
DEFAULT=$HOME/.mail/

Regards,
Ovidiu

Mads Samsing wrote:

>The only packages from mail-mta, that I have installed are nbsmtp and
>ssmtp. ssmtp came with vixie-cron.
>
>On 18. April @ 22:46, Ovidiu Bivolaru wrote:
>  
>
>>which MTA are you using ? Qmail ? Postfix ? Sendmail ?
>>
>>Mads Samsing wrote:
>>
>>    
>>
>>>I couldn't find anything that could be changed. Therefore I just made
>>>~/.maildir my maildir instead of ~/mail/.
>>>
>>>The easiest solution.
>>>
>>>But thank you
>>>
>>>On 18. April @ 22:13, Ovidiu Bivolaru wrote:
>>> 
>>>
>>>      
>>>
>>>>I guess you need to check your MTA, procmail, fetchmail config files as
>>>>well.
>>>>
>>>>Mads Samsing wrote:
>>>>
>>>>   
>>>>
>>>>        
>>>>
>>>>>Thanks, but ...
>>>>>
>>>>>I am using maildir, and the entries in /etc/mutt/Muttrc has been changed
>>>>>in my .muttrc, and shouldn't be a problem.
>>>>>
>>>>>I have actually changed them in /etc/mutt/Muttrc as well.
>>>>>
>>>>>
>>>>>
>>>>>     
>>>>>
>>>>>          
>>>>>
>>>>>>Hi,
>>>>>>
>>>>>>The .maildir is created in every user's home dir because "adduser"
>>>>>>command will copy /etc/skel/* in every new home dir (depends which
>>>>>>parameter you use for adduser). Also, mutt is trying to read mail from
>>>>>>$HOME/.maildir due to the following entries from /etc/mutt/Muttrc
>>>>>>set mbox_type=Maildir
>>>>>>set folder=~/.maildir
>>>>>>set spoolfile=~/.maildir/
>>>>>>set record=~/.maildir-sent/
>>>>>>I guess you want to change these to ~/.mail/ and also change mbox_type
>>>>>>if you are not using Maildir. This can be done in ~/.muttrc as well. If
>>>>>>you are not using Maildir, also make sure you don't have "maildir" in
>>>>>>USE flags.
>>>>>>
>>>>>>Regards,
>>>>>>Ovidiu
>>>>>>
>>>>>>Mads Samsing wrote:
>>>>>>
>>>>>>  
>>>>>>
>>>>>>       
>>>>>>
>>>>>>            
>>>>>>
>>>>>>>Hey everyone
>>>>>>>
>>>>>>>Finally lm-sensors works for me. But if I write the command: sensors -s,
>>>>>>>the computer halts and nothing more happen.
>>>>>>>The command: sensors, gives me the temperature.
>>>>>>>
>>>>>>>It is not really a problem, I am just wondering why?
>>>>>>>According to a guide I found on this, sensors -s, shouldn't give any
>>>>>>>problems. (It is a Transmeta TM-5800/ECS iBuddie A530).
>>>>>>>
>>>>>>>Another thing, though it isn't really supposed to be posted here, so I
>>>>>>>won't blame anyone for not answering: I use Mutt/fetchmail/procmail.
>>>>>>>All mails should be put into ~/mail/, which they are, but an empty
>>>>>>>~/.maildir is created as well. Is it procmail or fetchmail that causes
>>>>>>>this, and how can it be changed?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>    
>>>>>>>
>>>>>>>         
>>>>>>>
>>>>>>>              
>>>>>>>
>>>>>>-- 
>>>>>>gentoo-laptop@gentoo.org mailing list
>>>>>>
>>>>>>  
>>>>>>
>>>>>>       
>>>>>>
>>>>>>            
>>>>>>
>>>>>     
>>>>>
>>>>>          
>>>>>
>>>>-- 
>>>>gentoo-laptop@gentoo.org mailing list
>>>>
>>>>   
>>>>
>>>>        
>>>>
>>> 
>>>
>>>      
>>>
>>-- 
>>gentoo-laptop@gentoo.org mailing list
>>
>>    
>>
>
>  
>

-- 
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] Sensors

[Mads Samsing]

I simply changed the maildir to ~/.maildir instead of using ~/mail.
But it is no big deal. I just don't understand why it created the other
directory, whenever i fetched mail from my account.

But mails are delivered correctly. (and were delivered correctly).

On 18. April @ 23:55, Ovidiu Bivolaru wrote:
> well. you could remove ssmtp/nbsmtp and install a real MTA: QMail or
> Postfix (they do support maildir).
> But I could not guarantee that this would solve the problem. I guess it
> is not a big deal that .maildir is created as long as mails are
> delivered correctly in ~/.mail :)
> Make sure that you have in /etc/procmailrc:
> DEFAULT=$HOME/.mail/
> 
> Regards,
> Ovidiu
> 
> Mads Samsing wrote:
> 
> >The only packages from mail-mta, that I have installed are nbsmtp and
> >ssmtp. ssmtp came with vixie-cron.
> >
> >On 18. April @ 22:46, Ovidiu Bivolaru wrote:
> >  
> >
> >>which MTA are you using ? Qmail ? Postfix ? Sendmail ?
> >>
> >>Mads Samsing wrote:
> >>
> >>    
> >>
> >>>I couldn't find anything that could be changed. Therefore I just made
> >>>~/.maildir my maildir instead of ~/mail/.
> >>>
> >>>The easiest solution.
> >>>
> >>>But thank you
> >>>
> >>>On 18. April @ 22:13, Ovidiu Bivolaru wrote:
> >>> 
> >>>
> >>>      
> >>>
> >>>>I guess you need to check your MTA, procmail, fetchmail config files as
> >>>>well.
> >>>>
> >>>>Mads Samsing wrote:
> >>>>
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>>>>Thanks, but ...
> >>>>>
> >>>>>I am using maildir, and the entries in /etc/mutt/Muttrc has been changed
> >>>>>in my .muttrc, and shouldn't be a problem.
> >>>>>
> >>>>>I have actually changed them in /etc/mutt/Muttrc as well.
> >>>>>
> >>>>>
> >>>>>
> >>>>>     
> >>>>>
> >>>>>          
> >>>>>
> >>>>>>Hi,
> >>>>>>
> >>>>>>The .maildir is created in every user's home dir because "adduser"
> >>>>>>command will copy /etc/skel/* in every new home dir (depends which
> >>>>>>parameter you use for adduser). Also, mutt is trying to read mail from
> >>>>>>$HOME/.maildir due to the following entries from /etc/mutt/Muttrc
> >>>>>>set mbox_type=Maildir
> >>>>>>set folder=~/.maildir
> >>>>>>set spoolfile=~/.maildir/
> >>>>>>set record=~/.maildir-sent/
> >>>>>>I guess you want to change these to ~/.mail/ and also change mbox_type
> >>>>>>if you are not using Maildir. This can be done in ~/.muttrc as well. If
> >>>>>>you are not using Maildir, also make sure you don't have "maildir" in
> >>>>>>USE flags.
> >>>>>>
> >>>>>>Regards,
> >>>>>>Ovidiu
> >>>>>>
> >>>>>>Mads Samsing wrote:
> >>>>>>
> >>>>>>  
> >>>>>>
> >>>>>>       
> >>>>>>
> >>>>>>            
> >>>>>>
> >>>>>>>Hey everyone
> >>>>>>>
> >>>>>>>Finally lm-sensors works for me. But if I write the command: sensors -s,
> >>>>>>>the computer halts and nothing more happen.
> >>>>>>>The command: sensors, gives me the temperature.
> >>>>>>>
> >>>>>>>It is not really a problem, I am just wondering why?
> >>>>>>>According to a guide I found on this, sensors -s, shouldn't give any
> >>>>>>>problems. (It is a Transmeta TM-5800/ECS iBuddie A530).
> >>>>>>>
> >>>>>>>Another thing, though it isn't really supposed to be posted here, so I
> >>>>>>>won't blame anyone for not answering: I use Mutt/fetchmail/procmail.
> >>>>>>>All mails should be put into ~/mail/, which they are, but an empty
> >>>>>>>~/.maildir is created as well. Is it procmail or fetchmail that causes
> >>>>>>>this, and how can it be changed?
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>    
> >>>>>>>
> >>>>>>>         
> >>>>>>>
> >>>>>>>              
> >>>>>>>
> >>>>>>-- 
> >>>>>>gentoo-laptop@gentoo.org mailing list
> >>>>>>
> >>>>>>  
> >>>>>>
> >>>>>>       
> >>>>>>
> >>>>>>            
> >>>>>>
> >>>>>     
> >>>>>
> >>>>>          
> >>>>>
> >>>>-- 
> >>>>gentoo-laptop@gentoo.org mailing list
> >>>>
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>> 
> >>>
> >>>      
> >>>
> >>-- 
> >>gentoo-laptop@gentoo.org mailing list
> >>
> >>    
> >>
> >
> >  
> >
> 
> -- 
> gentoo-laptop@gentoo.org mailing list
> 

-- 

Venlig hilsen/Best regards,
Mads Samsing [mads.samsing [AT] webspeed.dk]

	Got virus? Try this: format c:

-- 
gentoo-laptop@gentoo.org mailing list