[gentoo-laptop] cardbus usb2 not working

[gentoo-laptop] cardbus usb2 not working

[Alessandro D.M. Semeria]

I'd use a cradbus-usb2  to connect with an external 
usb2 hard-disk, but kernel seem to was not able to handle this 
device.
My laptop-box: 

Linux ulisse 2.4.26-gentoo-r9 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux

--
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] cardbus usb2 not working

[Guðni Þ. Björgvinsson]

Do you have the necessary support for usb and scsi emulation in the
kernel? What does dmesg tell you when you plug in the usb disk?

On Fri, 2004-11-26 at 17:38 +0100, Alessandro D.M. Semeria wrote:
> I'd use a cradbus-usb2  to connect with an external 
> usb2 hard-disk, but kernel seem to was not able to handle this 
> device.
> My laptop-box: 
> 
> Linux ulisse 2.4.26-gentoo-r9 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux
> 
> --
> gentoo-laptop@gentoo.org mailing list
> 


--
gentoo-laptop@gentoo.org mailing list

Re: [gentoo-laptop] cardbus usb2 not working

[Alessandro D.M. Semeria]

Dmesg output when I plug cardbus:

Linux PCMCIA Card Services 3.2.5
  kernel build: 2.4.26-gentoo-r9 #11 Sun Oct 10 14:57:14 CEST 2004
  options:  [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Enabling device 00:0b.0 (0000 -> 0002)
PCI: No IRQ known for interrupt pin A of device 00:0b.0 - using IRQ 255
PCI: Enabling device 00:0b.1 (0000 -> 0002)
PCI: No IRQ known for interrupt pin B of device 00:0b.1 - using IRQ 255
  Toshiba ToPIC100 rev 20 PCI-to-CardBus at slot 00:0b, mem 0x10000000
    host opts [0]: [slot 0xd0] [ccr 0x11] [cdr 0x86] [rcr 0xc000000] [no pci irq] [lat 64/176] [bus 20/20]
    host opts [1]: [slot 0xd0] [ccr 0x21] [cdr 0x86] [rcr 0xc000000] [no pci irq] [lat 64/176] [bus 21/21]
    ISA irqs (default) = 4,5,7,10,12 polling interval = 1000 ms
When I plug the hard disk no messages.

My kernel config about usb and scsi (the usb to serial configuration is for the usb-gprs connection and palm sync):


# USB support
#
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_UHCI_ALT=y
CONFIG_USB_OHCI=y
CONFIG_USB_STORAGE=m
CONFIG_USB_PRINTER=m

# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_PL2303=m


# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m

Thanks

A.S.

On Fri, 26 Nov 2004 17:03:04 +0000
Guðni Þ. Björgvinsson <gthb@hratt.net> wrote:

> Do you have the necessary support for usb and scsi emulation in the
> kernel? What does dmesg tell you when you plug in the usb disk?
> 
> On Fri, 2004-11-26 at 17:38 +0100, Alessandro D.M. Semeria wrote:
> > I'd use a cradbus-usb2  to connect with an external 
> > usb2 hard-disk, but kernel seem to was not able to handle this 
> > device.
> > My laptop-box: 
> > 
> > Linux ulisse 2.4.26-gentoo-r9 i686 Pentium III (Coppermine)
> > GenuineIntel GNU/Linux
> > 
> > --
> > gentoo-laptop@gentoo.org mailing list
> > 
> 
> 
> --
> gentoo-laptop@gentoo.org mailing list
> 

--
gentoo-laptop@gentoo.org mailing list