[gentoo-embedded] GCC 4.3 fails on mpfr

[gentoo-embedded] GCC 4.3 fails on mpfr

[Dilip Malinur Ramesh]

Hi,
I am trying to build a cross compiler toolchain using 'crossdev 'and the
gcc source version is gcc-4.3.0 

I am getting following errors while configuring gcc-stage1, 
{{
checking for correct version of gmp.h... yes
checking for correct version of mpfr.h... no
configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
Try the --with-gmp and/or --with-mpfr options to specify their
locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
See also http://gcc.gnu.org/install/prerequisites.html for additional
info.
If you obtained GMP and/or MPFR from a vendor distribution package, make
sure that you have installed both the libraries and the header files.
They may be located in separate packages.

!!! ERROR: cross-sh4-unknown-linux-gnu/gcc-4.3.0 failed.
Call stack:
}}

I understand the pre-requisite for gcc-4.3 is mpfr 4.1+ but I am not
sure how to pass '--with-mpfr' configure options to gcc.

Any help will be highly appreciated 

With kind regards,
Dilip  
--
gentoo-embedded@lists.gentoo.org mailing list

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Mike Frysinger]

[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]

On Tuesday 06 May 2008, Dilip Malinur Ramesh wrote:
> I am trying to build a cross compiler toolchain using 'crossdev 'and the
> gcc source version is gcc-4.3.0
>
> I am getting following errors while configuring gcc-stage1,
> {{
> checking for correct version of gmp.h... yes
> checking for correct version of mpfr.h... no
> configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
> Try the --with-gmp and/or --with-mpfr options to specify their
> locations.
> Copies of these libraries' source code can be found at their respective
> hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
> See also http://gcc.gnu.org/install/prerequisites.html for additional
> info.
> If you obtained GMP and/or MPFR from a vendor distribution package, make
> sure that you have installed both the libraries and the header files.
> They may be located in separate packages.
>
> !!! ERROR: cross-sh4-unknown-linux-gnu/gcc-4.3.0 failed.
> Call stack:
> }}
>
> I understand the pre-requisite for gcc-4.3 is mpfr 4.1+ but I am not
> sure how to pass '--with-mpfr' configure options to gcc.

do you have mpfr and gmp already installed ?

qlist -I -v mpfr gmp
-mike

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 827 bytes --]

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Christopher Friedt]

This is a 'chicken / egg' problem. In order to build a cross compiler 
for arch X you need mpfr compiled for arch X. In order to build mpfr for 
arch X you need a toolchain for arch X.

Try building the cross-compiler without mpfr first, then build libmpfr, 
and then rebuild the cross compiler.

I can't say whether or not that will work with crossdev, but that's the 
way things Should(TM) work.

Chris

Dilip Malinur Ramesh wrote:
> Hi,
> I am trying to build a cross compiler toolchain using 'crossdev 'and the
> gcc source version is gcc-4.3.0 
> 
> I am getting following errors while configuring gcc-stage1, 
> {{
> checking for correct version of gmp.h... yes
> checking for correct version of mpfr.h... no
> configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
> Try the --with-gmp and/or --with-mpfr options to specify their
> locations.
> Copies of these libraries' source code can be found at their respective
> hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
> See also http://gcc.gnu.org/install/prerequisites.html for additional
> info.
> If you obtained GMP and/or MPFR from a vendor distribution package, make
> sure that you have installed both the libraries and the header files.
> They may be located in separate packages.
> 
> !!! ERROR: cross-sh4-unknown-linux-gnu/gcc-4.3.0 failed.
> Call stack:
> }}
> 
> I understand the pre-requisite for gcc-4.3 is mpfr 4.1+ but I am not
> sure how to pass '--with-mpfr' configure options to gcc.
> 
> Any help will be highly appreciated 
> 
> With kind regards,
> Dilip  
-- 
gentoo-embedded@lists.gentoo.org mailing list

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Mike Frysinger]

[-- Attachment #1: Type: text/plain, Size: 552 bytes --]

On Tuesday 06 May 2008, Christopher Friedt wrote:
> This is a 'chicken / egg' problem. In order to build a cross compiler
> for arch X you need mpfr compiled for arch X. In order to build mpfr for
> arch X you need a toolchain for arch X.
>
> Try building the cross-compiler without mpfr first, then build libmpfr,
> and then rebuild the cross compiler.

you cant build gcc-4.3 without gmp and mpfr.  they're hard requirements.  but 
they're requirements that the host system has it, not that they are 
cross-compiled for the target.
-mike

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 827 bytes --]

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Ned Ludd]

On Tue, 2008-05-06 at 17:24 -0400, Mike Frysinger wrote:
> On Tuesday 06 May 2008, Christopher Friedt wrote:
> > This is a 'chicken / egg' problem. In order to build a cross compiler
> > for arch X you need mpfr compiled for arch X. In order to build mpfr for
> > arch X you need a toolchain for arch X.
> >
> > Try building the cross-compiler without mpfr first, then build libmpfr,
> > and then rebuild the cross compiler.
> 
> you cant build gcc-4.3 without gmp and mpfr.  they're hard requirements.  but 
> they're requirements that the host system has it, not that they are 
> cross-compiled for the target.
> -mike

Mike, 
this might pose a problem at Gentoo as I don't think mpfr can even be
cross compiled in the first place. I might be wrong but I seem to recall
fighting with it in the last week using ( arm-softfloat-linux-uclibc ||
arm*-softloat-linux-gnueabi).

-- 
Ned Ludd <solar@gentoo.org>
Gentoo Linux

-- 
gentoo-embedded@lists.gentoo.org mailing list

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Mike Frysinger]

[-- Attachment #1: Type: text/plain, Size: 1385 bytes --]

On Tuesday 06 May 2008, Ned Ludd wrote:
> On Tue, 2008-05-06 at 17:24 -0400, Mike Frysinger wrote:
> > On Tuesday 06 May 2008, Christopher Friedt wrote:
> > > This is a 'chicken / egg' problem. In order to build a cross compiler
> > > for arch X you need mpfr compiled for arch X. In order to build mpfr
> > > for arch X you need a toolchain for arch X.
> > >
> > > Try building the cross-compiler without mpfr first, then build libmpfr,
> > > and then rebuild the cross compiler.
> >
> > you cant build gcc-4.3 without gmp and mpfr.  they're hard requirements. 
> > but they're requirements that the host system has it, not that they are
> > cross-compiled for the target.
>
> this might pose a problem at Gentoo as I don't think mpfr can even be
> cross compiled in the first place. I might be wrong but I seem to recall
> fighting with it in the last week using ( arm-softfloat-linux-uclibc ||
> arm*-softloat-linux-gnueabi).

i said they are host libraries, not target libraries.  gcc itself uses them in 
order to even execute in the first place starting with gcc-4.3.

what Christopher is probably referring to is gfortran support ... it requires 
mpfr/gmp to be cross-compiled.

but to address your question, they both do cross-compile fine.  i just did it 
two days ago for mingw32 target so that i could build up a gfortran 
cross-compiler.
-mike

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 827 bytes --]

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Ned Ludd]

On Wed, 2008-05-07 at 00:26 -0400, Mike Frysinger wrote:
> On Tuesday 06 May 2008, Ned Ludd wrote:
> > On Tue, 2008-05-06 at 17:24 -0400, Mike Frysinger wrote:
> > > On Tuesday 06 May 2008, Christopher Friedt wrote:
> > > > This is a 'chicken / egg' problem. In order to build a cross compiler
> > > > for arch X you need mpfr compiled for arch X. In order to build mpfr
> > > > for arch X you need a toolchain for arch X.
> > > >
> > > > Try building the cross-compiler without mpfr first, then build libmpfr,
> > > > and then rebuild the cross compiler.
> > >
> > > you cant build gcc-4.3 without gmp and mpfr.  they're hard requirements. 
> > > but they're requirements that the host system has it, not that they are
> > > cross-compiled for the target.
> >
> > this might pose a problem at Gentoo as I don't think mpfr can even be
> > cross compiled in the first place. I might be wrong but I seem to recall
> > fighting with it in the last week using ( arm-softfloat-linux-uclibc ||
> > arm*-softloat-linux-gnueabi).
> 
> i said they are host libraries, not target libraries.  gcc itself uses them in 
> order to even execute in the first place starting with gcc-4.3.
> 
> what Christopher is probably referring to is gfortran support ... it requires 
> mpfr/gmp to be cross-compiled.
> 
> but to address your question, they both do cross-compile fine.  i just did it 
> two days ago for mingw32 target so that i could build up a gfortran 
> cross-compiler.
> -mike


Really? I'm getting (just reproduced on a few crossdev install)


Notice the LDFLAGS.. yet still. 

armv5te-softfloat-linux-gnueabi-gcc
-shared  .libs/exceptions.o .libs/extract.o .libs/uceil_exp2.o .libs/uceil_log2.o .libs/ufloor_log2.o .libs/add.o .libs/add1.o .libs/add_ui.o .libs/agm.o .libs/clear.o .libs/cmp.o .libs/cmp_abs.o .libs/cmp_si.o .libs/cmp_ui.o .libs/comparisons.o .libs/div_2exp.o .libs/div_2si.o .libs/div_2ui.o .libs/div.o .libs/div_ui.o .libs/dump.o .libs/eq.o .libs/exp10.o .libs/exp2.o .libs/exp3.o .libs/exp.o .libs/frac.o .libs/get_d.o .libs/get_exp.o .libs/get_str.o .libs/init.o .libs/inp_str.o .libs/isinteger.o .libs/isinf.o .libs/isnan.o .libs/isnum.o .libs/const_log2.o .libs/log.o .libs/mul_2exp.o .libs/mul_2si.o .libs/mul_2ui.o .libs/mul.o .libs/mul_ui.o .libs/neg.o .libs/next.o .libs/out_str.o .libs/const_pi.o .libs/pow.o .libs/pow_si.o .libs/pow_ui.o .libs/print_raw.o .libs/print_rnd_mode.o .libs/random2.o .libs/random.o .libs/reldiff.o .libs/round_prec.o .libs/set.o .libs/setmax.o .libs/setmin.o .libs/set_d.o .libs/set_dfl_prec.o .libs/set_exp.o .libs/set_rnd.o .libs/set_f.o .libs/set_prc_raw.o .libs/set_prec.o .libs/set_q.o .libs/set_si.o .libs/set_str.o .libs/set_str_raw.o .libs/set_ui.o .libs/set_z.o .libs/sqrt.o .libs/sqrt_ui.o .libs/sub.o .libs/sub1.o .libs/sub_ui.o .libs/rint.o .libs/ui_div.o .libs/ui_sub.o .libs/urandomb.o .libs/get_z_exp.o .libs/swap.o .libs/factorial.o .libs/cosh.o .libs/sinh.o .libs/tanh.o .libs/acosh.o .libs/asinh.o .libs/atanh.o .libs/atan.o .libs/cmp2.o .libs/exp_2.o .libs/asin.o .libs/const_euler.o .libs/cos.o .libs/sin.o .libs/tan.o .libs/fma.o .libs/fms.o .libs/hypot.o .libs/log1p.o .libs/expm1.o .libs/log2.o .libs/log10.o .libs/ui_pow.o .libs/ui_pow_ui.o .libs/minmax.o .libs/dim.o .libs/signbit.o .libs/copysign.o .libs/setsign.o .libs/gmp_op.o .libs/init2.o .libs/acos.o .libs/sin_cos.o .libs/set_nan.o .libs/set_inf.o .libs/powerof2.o .libs/gamma.o .libs/set_ld.o .libs/get_ld.o .libs/cbrt.o .libs/volatile.o .libs/fits_sshort.o .libs/fits_sint.o .libs/fits_slong.o .libs/fits_ushort.o .libs/fits_uint.o .libs/fits_ulong.o .libs/fits_uintmax.o .libs/fits_intmax.o .libs/get_si.o .libs/get_ui.o .libs/zeta.o .libs/cmp_d.o .libs/erf.o .libs/inits.o .libs/inits2.o .libs/clears.o .libs/sgn.o .libs/check.o .libs/sub1sp.o .libs/version.o .libs/mpn_exp.o .libs/mpfr-gmp.o .libs/mp_clz_tab.o .libs/sum.o .libs/add1sp.o .libs/free_cache.o .libs/si_op.o .libs/cmp_ld.o .libs/set_ui_2exp.o .libs/set_si_2exp.o .libs/set_uj.o .libs/set_sj.o .libs/get_sj.o .libs/get_uj.o .libs/get_z.o .libs/iszero.o .libs/cache.o .libs/sqr.o .libs/int_ceil_log2.o .libs/isqrt.o .libs/strtofr.o .libs/pow_z.o .libs/logging.o .libs/mulders.o .libs/get_f.o .libs/round_p.o .libs/erfc.o .libs/atan2.o .libs/subnormal.o .libs/const_catalan.o .libs/root.o .libs/sec.o .libs/csc.o .libs/cot.o .libs/eint.o .libs/sech.o .libs/csch.o .libs/coth.o .libs/round_near_x.o .libs/constant.o .libs/abort_prec_max.o .libs/stack_interface.o .libs/lngamma.o .libs/zeta_ui.o .libs/set_d64.o .libs/get_d64.o .libs/jn.o .libs/yn.o .libs/remquo.o .libs/get_patches.o  -L/home/solar/Desktop/gizard/usr/lib -L/home/solar/Desktop/gizard/lib -L/usr/armv5te-softfloat-linux-gnueabi/usr/lib -L/usr/armv5te-softfloat-linux-gnueabi/lib /usr/lib/libgmp.so  -Wl,-soname -Wl,libmpfr.so.1 -o .libs/libmpfr.so.1.1.1
/usr/lib/libgmp.so: file not recognized: File format not recognized
collect2: ld returned 1 exit status
make[1]: *** [libmpfr.la] Error 1
make[1]: Leaving directory
`/home/solar/Desktop/gizard/tmp/portage/dev-libs/mpfr-2.3.1/work/mpfr-2.3.1'
make: *** [all-recursive] Error 1
 * 
 * ERROR: dev-libs/mpfr-2.3.1 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 2017:  Called die
 * The specific snippet of code:
 *           emake || die "emake failed";
 *  The die message:
 *   emake failed



solar@media ~/Desktop/gizard $ ./giz --info
Portage 2.1.4.4 (embedded, gcc-4.2.3, unavailable, 2.6.23-hardened-r7
x86_64)
=================================================================
System uname: 2.6.23-hardened-r7 x86_64 Intel(R) Core(TM)2 Quad CPU @
2.66GHz
Timestamp of tree: Tue, 06 May 2008 16:04:01 +0000
app-shells/bash:     3.2_p17-r1
dev-lang/python:     2.4.4-r9
dev-python/pycrypto: 2.0.1-r6
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.13, 2.61-r1
sys-devel/automake:  1.5, 1.7.9-r1, 1.9.6-r2, 1.10.1
sys-devel/binutils:  2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.26
virtual/os-headers:  2.6.23-r3
ACCEPT_KEYWORDS="arm ~arm"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-Os -pipe -I/home/solar/Desktop/gizard/usr/include
-I/usr/armv5te-softfloat-linux-gnueabi/include"
CHOST="armv5te-softfloat-linux-gnueabi"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/env.d /etc/terminfo"
CXXFLAGS="-Os -pipe -I/home/solar/Desktop/gizard/usr/include
-I/usr/armv5te-softfloat-linux-gnueabi/include"
DISTDIR="/usr/portage/distfiles"
FEATURES="buildpkg distlocks metadata-transfer sandbox sfperms strict
unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org
http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LDFLAGS="-L/home/solar/Desktop/gizard/usr/lib
-L/home/solar/Desktop/gizard/lib
-L/usr/armv5te-softfloat-linux-gnueabi/usr/lib
-L/usr/armv5te-softfloat-linux-gnueabi/lib"
MAKEOPTS="-j8"
PKGDIR="/home/solar/Desktop/gizard/packages/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--compress --force --whole-file --delete --stats --timeout=180
--exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/home/solar/Desktop/gizard/tmp/"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/portage/local"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X fbdev kdrive make-symlinks minimal multicall savedconfig tslib
zlib"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG,
LC_ALL, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS,
PORTAGE_RSYNC_EXTRA_OPTS

solar@media ~/Desktop/gizard $ 
solar@media ~/Desktop/gizard $ cat giz 
cd /home/solar/Desktop/gizard
sudo env PORTAGE_CONFIGROOT=$PWD/ \
	emerge "$@"

solar@media ~/Desktop/gizard $ cat etc/make.conf 
ROOT="/home/solar/Desktop/gizard"
ARCH="arm"
CHOST="armv5te-softfloat-linux-gnueabi"
CBUILD="x86_64-pc-linux-gnu"
SYS_ROOT=/usr/${CHOST}
CFLAGS="-Os -pipe -I${ROOT}/usr/include -I${SYS_ROOT}/include"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-L${ROOT}/usr/lib -L${ROOT}/lib -L${SYS_ROOT}/usr/lib -L
${SYS_ROOT}/lib"
ACCEPT_KEYWORDS="arm ~arm"
USE="make-symlinks X minimal zlib kdrive tslib multicall savedconfig
fbdev"
VIDEO_CARDS="fbdev dummy"
INPUT_DEVICES="evdev keyboard mouse"
PORTDIR_OVERLAY="/usr/portage/local/"
MAKEOPTS="-j8"
FEATURES="-collision-protect sandbox buildpkg"
PKGDIR=$ROOT/packages/
PORTAGE_TMPDIR=${ROOT}/tmp/

PKG_CONFIG_PATH=${ROOT}/usr/lib/pkgconfig/


The only pkgs I've got to work so far include
solar@media ~/Desktop/gizard $ ls packages/All/
alsa-headers-1.0.16.tbz2        dos2unix-3.1-r2.tbz2
iputils-20071127-r1.tbz2        make-3.81.tbz2
sysfsutils-2.1.0.tbz2
audiofile-0.2.6-r3.tbz2         dosfstools-2.11-r4.tbz2
kbproto-1.0.3.tbz2              miscfiles-1.4.2.tbz2
sysvinit-2.86-r10.tbz2
autoconf-wrapper-5.tbz2         encodings-1.0.2.tbz2
libICE-1.0.4.tbz2               mktemp-1.5.tbz2
tar-1.20.tbz2
automake-wrapper-3-r1.tbz2      ethtool-6.tbz2
libSM-1.0.3.tbz2                ncurses-5.6-r2.tbz2
timezone-data-2008b.tbz2
baselayout-1.12.12.tbz2         eventlog-0.2.7.tbz2
libXau-1.0.3.tbz2               net-tools-1.60_p20071202044231-r1.tbz2
tree-1.5.1.1.tbz2
bc-1.06.95.tbz2                 expat-2.0.1.tbz2
libXdmcp-1.0.2.tbz2             netselect-0.3-r2.tbz2
unifdef-1.20.tbz2
binutils-2.18-r1.tbz2           fbset-2.1.tbz2
libatomic_ops-1.2-r1.tbz2       oidentd-2.0.8-r1.tbz2
unzip-5.52-r2.tbz2
binutils-config-1.9-r4.tbz2     fixesproto-4.0.tbz2
libdrm-2.3.0.tbz2               openntpd-3.9_p1-r1.tbz2
util-macros-1.1.6.tbz2
build-docbook-catalog-1.2.tbz2  font-alias-1.0.1.tbz2
libevent-1.4.3.tbz2             patch-2.5.9-r1.tbz2
wakeonlan-0.41-r1.tbz2
busybox-1.10.1-r1.tbz2          fontsproto-2.0.2.tbz2
libexif-0.6.16-r1.tbz2          pax-utils-0.1.17.tbz2
wget-1.11.1.tbz2
busybox-1.10.1-r2.tbz2          freetype-2.3.5-r2.tbz2
libfontenc-1.0.4.tbz2           portage-utils-0.1.29.tbz2
which-2.19.tbz2
bzip2-1.0.5.tbz2                gawk-3.1.5-r5.tbz2
libiconv-0.tbz2                 reiserfsprogs-3.6.19-r2.tbz2
wireless-tools-29.tbz2
chpax-0.7.tbz2                  gcc-4.2.3.tbz2
libogg-1.1.3.tbz2               renderproto-0.9.3.tbz2
xbitmaps-1.0.1.tbz2
com_err-1.40.8.tbz2             gcc-config-1.4.0-r4.tbz2
libpaper-1.1.23.tbz2            rgb-1.0.1.tbz2
xcmiscproto-1.1.2.tbz2
cpio-2.9-r1.tbz2                gmp-4.2.2-r1.tbz2
linux-headers-2.6.25-r1.tbz2    rman-3.2.tbz2
xextproto-7.0.2.tbz2
cracklib-2.8.12.tbz2            gnu-gs-fonts-std-8.11.tbz2
lrzsz-0.12.20-r1.tbz2           rsync-3.0.2.tbz2
xf86bigfontproto-1.1.2.tbz2
cracklib-words-20080401.tbz2    gnuconfig-20080123.tbz2
lzo-2.02-r1.tbz2                sandbox-1.2.18.1-r2.tbz2
xproto-7.0.12.tbz2
damageproto-1.1.0.tbz2          gperf-3.0.3.tbz2
m4-1.4.11.tbz2                  sed-4.1.5-r1.tbz2
xtrans-1.0.4.tbz2
debianutils-2.28.4.tbz2         grep-2.5.1a-r1.tbz2
mailbase-1.tbz2                 shadow-4.1.1.tbz2
yacc-1.9.1-r3.tbz2
dhcpcd-3.2.3.tbz2               gzip-1.3.12-r1.tbz2
mailwrapper-0.2.1.tbz2          smtptools-0.2.3.tbz2
zlib-1.2.3-r1.tbz2
dnsmasq-2.41.tbz2               hotplug-base-20040401.tbz2
mailx-support-20060102-r1.tbz2  strace-4.5.16-r1.tbz2
solar@media ~/Desktop/gizard $ 


--
gentoo-embedded@lists.gentoo.org mailing list

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Mike Frysinger]

[-- Attachment #1: Type: text/plain, Size: 5550 bytes --]

On Wednesday 07 May 2008, Ned Ludd wrote:
> On Wed, 2008-05-07 at 00:26 -0400, Mike Frysinger wrote:
> > On Tuesday 06 May 2008, Ned Ludd wrote:
> > > On Tue, 2008-05-06 at 17:24 -0400, Mike Frysinger wrote:
> > > > On Tuesday 06 May 2008, Christopher Friedt wrote:
> > > > > This is a 'chicken / egg' problem. In order to build a cross
> > > > > compiler for arch X you need mpfr compiled for arch X. In order to
> > > > > build mpfr for arch X you need a toolchain for arch X.
> > > > >
> > > > > Try building the cross-compiler without mpfr first, then build
> > > > > libmpfr, and then rebuild the cross compiler.
> > > >
> > > > you cant build gcc-4.3 without gmp and mpfr.  they're hard
> > > > requirements. but they're requirements that the host system has it,
> > > > not that they are cross-compiled for the target.
> > >
> > > this might pose a problem at Gentoo as I don't think mpfr can even be
> > > cross compiled in the first place. I might be wrong but I seem to
> > > recall fighting with it in the last week using (
> > > arm-softfloat-linux-uclibc || arm*-softloat-linux-gnueabi).
> >
> > i said they are host libraries, not target libraries.  gcc itself uses
> > them in order to even execute in the first place starting with gcc-4.3.
> >
> > what Christopher is probably referring to is gfortran support ... it
> > requires mpfr/gmp to be cross-compiled.
> >
> > but to address your question, they both do cross-compile fine.  i just
> > did it two days ago for mingw32 target so that i could build up a
> > gfortran cross-compiler.
>
> Really? I'm getting (just reproduced on a few crossdev install)
>
>
> Notice the LDFLAGS.. yet still.
>
> armv5te-softfloat-linux-gnueabi-gcc
> -shared  .libs/exceptions.o .libs/extract.o .libs/uceil_exp2.o
> .libs/uceil_log2.o .libs/ufloor_log2.o .libs/add.o .libs/add1.o
> .libs/add_ui.o .libs/agm.o .libs/clear.o .libs/cmp.o .libs/cmp_abs.o
> .libs/cmp_si.o .libs/cmp_ui.o .libs/comparisons.o .libs/div_2exp.o
> .libs/div_2si.o .libs/div_2ui.o .libs/div.o .libs/div_ui.o .libs/dump.o
> .libs/eq.o .libs/exp10.o .libs/exp2.o .libs/exp3.o .libs/exp.o .libs/frac.o
> .libs/get_d.o .libs/get_exp.o .libs/get_str.o .libs/init.o .libs/inp_str.o
> .libs/isinteger.o .libs/isinf.o .libs/isnan.o .libs/isnum.o
> .libs/const_log2.o .libs/log.o .libs/mul_2exp.o .libs/mul_2si.o
> .libs/mul_2ui.o .libs/mul.o .libs/mul_ui.o .libs/neg.o .libs/next.o
> .libs/out_str.o .libs/const_pi.o .libs/pow.o .libs/pow_si.o .libs/pow_ui.o
> .libs/print_raw.o .libs/print_rnd_mode.o .libs/random2.o .libs/random.o
> .libs/reldiff.o .libs/round_prec.o .libs/set.o .libs/setmax.o
> .libs/setmin.o .libs/set_d.o .libs/set_dfl_prec.o .libs/set_exp.o
> .libs/set_rnd.o .libs/set_f.o .libs/set_prc_raw.o .libs/set_prec.o
> .libs/set_q.o .libs/set_si.o .libs/set_str.o .libs/set_str_raw.o
> .libs/set_ui.o .libs/set_z.o .libs/sqrt.o .libs/sqrt_ui.o .libs/sub.o
> .libs/sub1.o .libs/sub_ui.o .libs/rint.o .libs/ui_div.o .libs/ui_sub.o
> .libs/urandomb.o .libs/get_z_exp.o .libs/swap.o .libs/factorial.o
> .libs/cosh.o .libs/sinh.o .libs/tanh.o .libs/acosh.o .libs/asinh.o
> .libs/atanh.o .libs/atan.o .libs/cmp2.o .libs/exp_2.o .libs/asin.o
> .libs/const_euler.o .libs/cos.o .libs/sin.o .libs/tan.o .libs/fma.o
> .libs/fms.o .libs/hypot.o .libs/log1p.o .libs/expm1.o .libs/log2.o
> .libs/log10.o .libs/ui_pow.o .libs/ui_pow_ui.o .libs/minmax.o .libs/dim.o
> .libs/signbit.o .libs/copysign.o .libs/setsign.o .libs/gmp_op.o
> .libs/init2.o .libs/acos.o .libs/sin_cos.o .libs/set_nan.o .libs/set_inf.o
> .libs/powerof2.o .libs/gamma.o .libs/set_ld.o .libs/get_ld.o .libs/cbrt.o
> .libs/volatile.o .libs/fits_sshort.o .libs/fits_sint.o .libs/fits_slong.o
> .libs/fits_ushort.o .libs/fits_uint.o .libs/fits_ulong.o
> .libs/fits_uintmax.o .libs/fits_intmax.o .libs/get_si.o .libs/get_ui.o
> .libs/zeta.o .libs/cmp_d.o .libs/erf.o .libs/inits.o .libs/inits2.o
> .libs/clears.o .libs/sgn.o .libs/check.o .libs/sub1sp.o .libs/version.o
> .libs/mpn_exp.o .libs/mpfr-gmp.o .libs/mp_clz_tab.o .libs/sum.o
> .libs/add1sp.o .libs/free_cache.o .libs/si_op.o .libs/cmp_ld.o
> .libs/set_ui_2exp.o .libs/set_si_2exp.o .libs/set_uj.o .libs/set_sj.o
> .libs/get_sj.o .libs/get_uj.o .libs/get_z.o .libs/iszero.o .libs/cache.o
> .libs/sqr.o .libs/int_ceil_log2.o .libs/isqrt.o .libs/strtofr.o
> .libs/pow_z.o .libs/logging.o .libs/mulders.o .libs/get_f.o .libs/round_p.o
> .libs/erfc.o .libs/atan2.o .libs/subnormal.o .libs/const_catalan.o
> .libs/root.o .libs/sec.o .libs/csc.o .libs/cot.o .libs/eint.o .libs/sech.o
> .libs/csch.o .libs/coth.o .libs/round_near_x.o .libs/constant.o
> .libs/abort_prec_max.o .libs/stack_interface.o .libs/lngamma.o
> .libs/zeta_ui.o .libs/set_d64.o .libs/get_d64.o .libs/jn.o .libs/yn.o
> .libs/remquo.o .libs/get_patches.o  -L/home/solar/Desktop/gizard/usr/lib
> -L/home/solar/Desktop/gizard/lib
> -L/usr/armv5te-softfloat-linux-gnueabi/usr/lib
> -L/usr/armv5te-softfloat-linux-gnueabi/lib /usr/lib/libgmp.so  -Wl,-soname
> -Wl,libmpfr.so.1 -o .libs/libmpfr.so.1.1.1 /usr/lib/libgmp.so: file not
> recognized: File format not recognized collect2: ld returned 1 exit status
> make[1]: *** [libmpfr.la] Error 1
> make[1]: Leaving directory
> `/home/solar/Desktop/gizard/tmp/portage/dev-libs/mpfr-2.3.1/work/mpfr-2.3.1
>' make: *** [all-recursive] Error 1

looks like libtool hate, probably due to the stupid -rpath /usr/lib given to 
the libtool link line.  i bet if you deleted /usr/lib/libgmp.la it'd work ...
-mike

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 827 bytes --]

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Ned Ludd]

On Wed, 2008-05-07 at 01:06 -0400, Mike Frysinger wrote:
> On Wednesday 07 May 2008, Ned Ludd wrote:
> .... Error 1

> looks like libtool hate, probably due to the stupid -rpath /usr/lib given to 
> the libtool link line.  i bet if you deleted /usr/lib/libgmp.la it'd work ...

The joys of cross-compiles..

Had to move  libgmp.so out of the way so libtool did not find it
in /usr/lib64 but rather the $ROOT/usr/lib. After that mpfr cross-merged
without problem.

-- 
gentoo-embedded@lists.gentoo.org mailing list

RE: [gentoo-embedded] GCC 4.3 fails on mpfr

[Dilip Malinur Ramesh]

Hi,
I am able to successfully build cross compiler toolchain using gcc-4.3
after installing mpfr-2.3.1 libraries on host system.
Thank you for all your help and support.

Regards,
Dilip 

-----Original Message-----
From: Mike Frysinger [mailto:vapier@gentoo.org] 
Sent: Wednesday, May 07, 2008 9:56 AM
To: gentoo-embedded@lists.gentoo.org
Cc: Ned Ludd; Christopher Friedt
Subject: Re: [gentoo-embedded] GCC 4.3 fails on mpfr

On Tuesday 06 May 2008, Ned Ludd wrote:
> On Tue, 2008-05-06 at 17:24 -0400, Mike Frysinger wrote:
> > On Tuesday 06 May 2008, Christopher Friedt wrote:
> > > This is a 'chicken / egg' problem. In order to build a cross
compiler
> > > for arch X you need mpfr compiled for arch X. In order to build
mpfr
> > > for arch X you need a toolchain for arch X.
> > >
> > > Try building the cross-compiler without mpfr first, then build
libmpfr,
> > > and then rebuild the cross compiler.
> >
> > you cant build gcc-4.3 without gmp and mpfr.  they're hard
requirements. 
> > but they're requirements that the host system has it, not that they
are
> > cross-compiled for the target.
>
> this might pose a problem at Gentoo as I don't think mpfr can even be
> cross compiled in the first place. I might be wrong but I seem to
recall
> fighting with it in the last week using ( arm-softfloat-linux-uclibc
||
> arm*-softloat-linux-gnueabi).

i said they are host libraries, not target libraries.  gcc itself uses
them in 
order to even execute in the first place starting with gcc-4.3.

what Christopher is probably referring to is gfortran support ... it
requires 
mpfr/gmp to be cross-compiled.

but to address your question, they both do cross-compile fine.  i just
did it 
two days ago for mingw32 target so that i could build up a gfortran 
cross-compiler.
-mike
--
gentoo-embedded@lists.gentoo.org mailing list

RE: [gentoo-embedded] GCC 4.3 fails on mpfr

[Dilip Malinur Ramesh]

>> you cant build gcc-4.3 without gmp and mpfr.  they're hard
requirements.  >> but they're requirements that the host system has it,
not that they are 
>> cross-compiled for the target.

Mpfr librarires was not installed on my host system. I have now
installed it using 'emerge mpfr' [mpfr-2.3.1]. I have successfully built
cross compiler toolchain up to gcc stage 1 (using crossdev), currently
glibc is getting built and will update once it completes final toolchain
building.

Thanks and regards, 
Dilip 

-----Original Message-----
From: Mike Frysinger [mailto:vapier@gentoo.org] 
Sent: Wednesday, May 07, 2008 2:55 AM
To: gentoo-embedded@lists.gentoo.org
Cc: Christopher Friedt
Subject: Re: [gentoo-embedded] GCC 4.3 fails on mpfr

On Tuesday 06 May 2008, Christopher Friedt wrote:
> This is a 'chicken / egg' problem. In order to build a cross compiler
> for arch X you need mpfr compiled for arch X. In order to build mpfr
for
> arch X you need a toolchain for arch X.
>
> Try building the cross-compiler without mpfr first, then build
libmpfr,
> and then rebuild the cross compiler.

you cant build gcc-4.3 without gmp and mpfr.  they're hard requirements.
but 
they're requirements that the host system has it, not that they are 
cross-compiled for the target.
-mike
--
gentoo-embedded@lists.gentoo.org mailing list

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Mike Frysinger]

[-- Attachment #1: Type: text/plain, Size: 513 bytes --]

On Wednesday 07 May 2008, Dilip Malinur Ramesh wrote:
> Mpfr librarires was not installed on my host system. I have now
> installed it using 'emerge mpfr' [mpfr-2.3.1]. I have successfully built
> cross compiler toolchain up to gcc stage 1 (using crossdev), currently
> glibc is getting built and will update once it completes final toolchain
> building.

this is due to crossdev using --nodeps.  historically this was to keep random 
packages bleeding in, but i wonder if it's necessary anymore.
-mike

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 827 bytes --]

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[bscuser]

Hi there, sorry for writing again on this issue, but I have not been able to
solve the problem with the configure command on GCC 4.3 due to the
dependency on MPFR and GMP.

I have them both installed correctly and the headers are in their own build
directories, while the library files (*.a) are in /usr/local/lib.
This verified, I tried different options among which the following,

../configure --with-gmp=/Users/simone/myApplications/gmp-4.2.4/
--with-gmp-lib=/usr/local/lib/libgmp.a
--with-mpfr=/Users/simone/myApplications/mpfr-2.4.0/
--with-mpfr-lib=/usr/local/lib/libmpfr.a

but obtaining again the same error from the configure call:

configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
See also http://gcc.gnu.org/install/prerequisites.html for additional info.
If you obtained GMP and/or MPFR from a vendor distribution package, make
sure that you have installed both the libraries and the header files.
They may be located in separate packages.


Why is this happening? What is it that I am not telling the configure to do
?

Thank you in advance
S.M.






dilip_ wrote:
> 
> Hi,
> I am trying to build a cross compiler toolchain using 'crossdev 'and the
> gcc source version is gcc-4.3.0 
> 
> I am getting following errors while configuring gcc-stage1, 
> {{
> checking for correct version of gmp.h... yes
> checking for correct version of mpfr.h... no
> configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
> Try the --with-gmp and/or --with-mpfr options to specify their
> locations.
> Copies of these libraries' source code can be found at their respective
> hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
> See also http://gcc.gnu.org/install/prerequisites.html for additional
> info.
> If you obtained GMP and/or MPFR from a vendor distribution package, make
> sure that you have installed both the libraries and the header files.
> They may be located in separate packages.
> 
> !!! ERROR: cross-sh4-unknown-linux-gnu/gcc-4.3.0 failed.
> Call stack:
> }}
> 
> I understand the pre-requisite for gcc-4.3 is mpfr 4.1+ but I am not
> sure how to pass '--with-mpfr' configure options to gcc.
> 
> Any help will be highly appreciated 
> 
> With kind regards,
> Dilip  
> --
> gentoo-embedded@lists.gentoo.org mailing list
> 
> 
> 

-- 
View this message in context: http://www.nabble.com/GCC-4.3-fails-on-mpfr-tp17081314p21911962.html
Sent from the gentoo-embedded mailing list archive at Nabble.com.

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Mike Frysinger]

On Monday 09 February 2009 08:40:06 bscuser wrote:
> Hi there, sorry for writing again on this issue, but I have not been able
> to solve the problem with the configure command on GCC 4.3 due to the
> dependency on MPFR and GMP.

just emerge mpfr and gmp

> I have them both installed correctly and the headers are in their own build
> directories, while the library files (*.a) are in /usr/local/lib.

why ?  the ones you `emerge` should work fine.
-mike

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[bscuser]

Hi there, thanks for replying. How do I merge them? What does it exactly
mean? when I command "mergelib mpfr" I obtain "usage:  /usr/bin/mergelib 
to-library from-library [object-filename-prefix]" where I do not know what
the to-library would be in this case.

I am sorry about the questions, but I am a beginner in all this.
I hope you can help

Best
S.M.



Mike Frysinger wrote:
> 
> On Monday 09 February 2009 08:40:06 bscuser wrote:
>> Hi there, sorry for writing again on this issue, but I have not been able
>> to solve the problem with the configure command on GCC 4.3 due to the
>> dependency on MPFR and GMP.
> 
> just emerge mpfr and gmp
> 
>> I have them both installed correctly and the headers are in their own
>> build
>> directories, while the library files (*.a) are in /usr/local/lib.
> 
> why ?  the ones you `emerge` should work fine.
> -mike
> 
> 
> 

-- 
View this message in context: http://www.nabble.com/GCC-4.3-fails-on-mpfr-tp17081314p21929616.html
Sent from the gentoo-embedded mailing list archive at Nabble.com.

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Mike Frysinger]

[-- Attachment #1: Type: text/plain, Size: 781 bytes --]

On Tuesday 10 February 2009 03:39:43 bscuser wrote:
> Mike Frysinger wrote:
> > On Monday 09 February 2009 08:40:06 bscuser wrote:
> >> Hi there, sorry for writing again on this issue, but I have not been
> >> able to solve the problem with the configure command on GCC 4.3 due to
> >> the dependency on MPFR and GMP.
> >
> > just emerge mpfr and gmp
>
> Hi there, thanks for replying. How do I merge them? What does it exactly
> mean? when I command "mergelib mpfr" I obtain "usage:  /usr/bin/mergelib
> to-library from-library [object-filename-prefix]" where I do not know what
> the to-library would be in this case.

this is Gentoo so the verb "emerge" means to run the program "emerge" and 
install the packages indicated

btw, please do not top post
-mike

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 835 bytes --]

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[bscuser]

Mike Frysinger wrote:
> 
> On Tuesday 10 February 2009 03:39:43 bscuser wrote:
>> Mike Frysinger wrote:
>> > On Monday 09 February 2009 08:40:06 bscuser wrote:
>> >> Hi there, sorry for writing again on this issue, but I have not been
>> >> able to solve the problem with the configure command on GCC 4.3 due to
>> >> the dependency on MPFR and GMP.
>> >
>> > just emerge mpfr and gmp
>>
>> Hi there, thanks for replying. How do I merge them? What does it exactly
>> mean? when I command "mergelib mpfr" I obtain "usage:  /usr/bin/mergelib
>> to-library from-library [object-filename-prefix]" where I do not know
>> what
>> the to-library would be in this case.
> 
> this is Gentoo so the verb "emerge" means to run the program "emerge" and 
> install the packages indicated
> 
> btw, please do not top post
> -mike
> 
> thank you very much; I will work at it and will post the outcome; thanks a
> gain
> S. 
> 

-- 
View this message in context: http://www.nabble.com/GCC-4.3-fails-on-mpfr-tp17081314p21942067.html
Sent from the gentoo-embedded mailing list archive at Nabble.com.

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Ahmed Ammar]

On Tue, 2009-02-10 at 12:56 -0800, bscuser wrote:
> > btw, please do not top post
> > -mike
> > 
> > thank you very much; I will work at it and will post the outcome; thanks a
> > gain
> > S. 
> > 

Well at least he didn't top post =)

-- 
Ahmed Ammar (b33fc0d3 [at] gentoo.org)

Re: [gentoo-embedded] GCC 4.3 fails on mpfr

[Mike Frysinger]

On Wednesday 11 February 2009 05:22:17 Ahmed Ammar wrote:
> On Tue, 2009-02-10 at 12:56 -0800, bscuser wrote:
> > > btw, please do not top post
> > > -mike
> > >
> > > thank you very much; I will work at it and will post the outcome;
> > > thanks a gain
> > > S.
>
> Well at least he didn't top post =)

one step at a time ;)
-mike