[gentoo-embedded] crossdev ARCH variable

[gentoo-embedded] crossdev ARCH variable

[Mike Gilbert]

I'm wondering how the ARCH variable is supposed to be set by crossdev;
it doesn't seem to be working at the moment.

I can see that crossdev sets ARCH in make.conf. It also sets the
profile to embedded. The embedded profile contains this in
make.defaults:

PROFILE_ONLY_VARS="ARCH ..."

So the ARCH variable in make.conf is ignored, which causes failures
whenever something references ARCH or the corresponding use flag.

I am currently hacking around this by setting ARCH in
/usr/$CHOST/etc/portage/profile/make.defaults.

I'm thinking that profile setting PROFILE_ONLY_VARS="ARCH" should be
removed. Or we could make my /etc/portage/profile workaround part of
crossdev proper.

What do you think?

[gentoo-embedded] Re: crossdev ARCH variable

[Mike Gilbert]

On Sun, Aug 3, 2014 at 8:58 PM, Mike Gilbert <floppym@gentoo.org> wrote:
> I'm wondering how the ARCH variable is supposed to be set by crossdev;
> it doesn't seem to be working at the moment.
>
> I can see that crossdev sets ARCH in make.conf. It also sets the
> profile to embedded. The embedded profile contains this in
> make.defaults:
>
> PROFILE_ONLY_VARS="ARCH ..."
>
> So the ARCH variable in make.conf is ignored, which causes failures
> whenever something references ARCH or the corresponding use flag.
>
> I am currently hacking around this by setting ARCH in
> /usr/$CHOST/etc/portage/profile/make.defaults.
>
> I'm thinking that profile setting PROFILE_ONLY_VARS="ARCH" should be
> removed. Or we could make my /etc/portage/profile workaround part of
> crossdev proper.
>
> What do you think?

Apologies for not reading the previous list traffic. I see this issue
has already been discussed in a previous thread.

[gentoo-embedded] Re: crossdev ARCH variable

[Joakim Tjernlund]

 
 yes, it was discussed but no resolution yet. Mike is tempted to remove the embedded profile
 so no action yet.

PS. Sorry for my crappy email client, I am traveling so got use what is available
 

 -----Mike Gilbert <floppym@gentoo.org> wrote: -----

 =======================
 To: gentoo-embedded@lists.gentoo.org
 From: Mike Gilbert <floppym@gentoo.org>
 Date: 04/08/2014 4:53 
 Subject: [gentoo-embedded] Re: crossdev ARCH variable 
 =======================
   On Sun, Aug 3, 2014 at 8:58 PM, Mike Gilbert <floppym@gentoo.org> wrote:
> I'm wondering how the ARCH variable is supposed to be set by crossdev;
> it doesn't seem to be working at the moment.
>
> I can see that crossdev sets ARCH in make.conf. It also sets the
> profile to embedded. The embedded profile contains this in
> make.defaults:
>
> PROFILE_ONLY_VARS="ARCH ..."
>
> So the ARCH variable in make.conf is ignored, which causes failures
> whenever something references ARCH or the corresponding use flag.
>
> I am currently hacking around this by setting ARCH in
> /usr/$CHOST/etc/portage/profile/make.defaults.
>
> I'm thinking that profile setting PROFILE_ONLY_VARS="ARCH" should be
> removed. Or we could make my /etc/portage/profile workaround part of
> crossdev proper.
>
> What do you think?

Apologies for not reading the previous list traffic. I see this issue
has already been discussed in a previous thread.

[gentoo-embedded] unsubscribe

[Roger McClurg]

[gentoo-embedded] unsubscribe

[brendan]

[gentoo-embedded] Unsubscribe

[Shashi Rao B]

[-- Attachment #1: Type: text/plain, Size: 14 bytes --]


 		 	   		  

[-- Attachment #2: Type: text/html, Size: 211 bytes --]

[gentoo-embedded] UNSUBSCRIBE

[Roger McClurg]

[gentoo-embedded] unsubscribe

[Danny Choi]

[-- Attachment #1: Type: text/plain, Size: 1 bytes --]



[-- Attachment #2: Type: text/html, Size: 5 bytes --]

[gentoo-embedded] FTDI jtag

[billium]

Has anybody got a usb jtag working in Gentoo, who could give me some 
handy tips.

The device I have is an Amotec JTAGkey-Tiny which is based on a FTDI 
FT2232 USB device.

I have tried to follow the Amotec documentation, but is oldish and not 
completely logical.

It all works on WinXP (using VirtualBox) but as it uses gdb I would like 
to use Gentoo only.


Many thanks


Billium

Re: [gentoo-embedded] FTDI jtag

[Jason]

billium wrote:
> Has anybody got a usb jtag working in Gentoo, who could give me some 
> handy tips.
> 
> The device I have is an Amotec JTAGkey-Tiny which is based on a FTDI 
> FT2232 USB device.

I use a similar device based on the same chip.

> I have tried to follow the Amotec documentation, but is oldish and not 
> completely logical.
> 
> It all works on WinXP (using VirtualBox) but as it uses gdb I would like 
> to use Gentoo only.

The following works for me:

~
[jason@phoenix] $  find /lib/modules/`uname -r`/ -name "*ftdi*"
/lib/modules/2.6.26/kernel/drivers/usb/serial/ftdi_sio.ko
~
[jason@phoenix] $ grep -rni ftdi /usr/src/linux/.config
1693:CONFIG_USB_SERIAL_FTDI_SIO=m
1754:# CONFIG_USB_FTDI_ELAN is not set

It should auto-load when you plug the cable in.  Then udev will create 
/dev/ttyUSB0 .

hth,

Jason.

[gentoo-embedded] unsubscribe

[Markus Meissner]

[gentoo-embedded] unsubscribe

[Massimo Signore]

unsubscribe

-- 
gentoo-embedded@lists.gentoo.org mailing list

Re: [gentoo-embedded] unsubscribe

[Mike Frysinger]

[-- Attachment #1: Type: text/plain, Size: 146 bytes --]

On Saturday 24 May 2008, Massimo Signore wrote:
> unsubscribe

please review the mailing list page:
http://www.gentoo.org/main/en/lists.xml
-mike

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 827 bytes --]

[gentoo-embedded] unsubscribe

[Jack Poulson]

[-- Attachment #1: Type: text/plain, Size: 12 bytes --]

unsubscribe

[-- Attachment #2: Type: text/html, Size: 12 bytes --]

Re: [gentoo-embedded] unsubscribe

[Mike Frysinger]

[-- Attachment #1: Type: text/plain, Size: 141 bytes --]

On Friday 23 May 2008, Jack Poulson wrote:
> unsubscribe

please review the mailing list page:
http://www.gentoo.org/main/en/lists.xml
-mike

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 827 bytes --]

[gentoo-embedded] unsubscribe

[Thomas Treutner]

unsubscribe
-- 
gentoo-embedded@lists.gentoo.org mailing list

[gentoo-embedded] unsubscribe

[accolade12]

unsubscribe
-- 
gentoo-embedded@lists.gentoo.org mailing list

[gentoo-embedded] pda.gentoo.ru: running Gentoo linux on arm handhelds

[Alexey Shvetsov]

Hello!

I would like to attract your attention to results of our work on project
which aims to run Gentoo linux on hx4700 and some other pda's (zaurus
for example). Now we have working stages which are available at
http://pda.gentoo.ru. These stages are built using
armv5te-softfloat-linux-eabi toolchain (gcc-4.2.2, glibc-2.7,
binutils-2.18). Note, that already over year we are using eabi toolchain
which allows additional memory and performance benefit. As a kernel we
used hh-sources-2.6.21 (mainly based on handhelds.org cvs with
additional patches for cfs-v24 (completely fair scheduler) and some
other).

Since I have only hx4700 pda then all packages were built/rebuilt on it.
Avoidance of cross-compiler greatly simplifies building. :)

We have working X:

http://kmeaw.com/ipaq-gentoo/xfce.html
http://www.youtube.com/profile_videos?user=kmeaw0&p=d

There are two variants of X implemented on pda:
1. Xorg server and evtouche driver for touchscreen
2. Xfbdev or Xw100 server + tslib

hx4700 has no hardware keyboard so we use screen one and (wow!) we have
handwriting recognition system with keyboard (cellwriter).

All our ebuilds are available in pda overlay (layman -a pda)
all binary packages available via
ftp://ftp.gentoo.ru/projects/handhelds/packages and
rsync://rsync.gentoo.ru/gentoo-pda-eabi-iwmmxt.

Additional info available on http://pda.gentoo.ru

Questions, comments are more then welcome.
-- 
Gentoo GNU/Linux 2.6.24 Dual Xeon

Mail to
      alexxyum@gmail.com
      alexxy@gentoo.ru
-- 
gentoo-embedded@lists.gentoo.org mailing list

[gentoo-embedded] unsubscribe

[Jeff Cunningham]

unsubscribe
-- 
gentoo-embedded@lists.gentoo.org mailing list

[gentoo-embedded] unsubscribe

[Jean-Claude Repetto]

-- 
gentoo-embedded@gentoo.org mailing list

[gentoo-embedded] unsubscribe

[momentics]

unsubscribe
-- 
gentoo-embedded@gentoo.org mailing list

[gentoo-embedded] unsubscribe

[Roger McClurg]

unsubscribe


-- 
gentoo-embedded@gentoo.org mailing list

Re: [gentoo-embedded] unsubscribe

[Ned Ludd]

http://www.gentoo.org/main/en/lists.xml



On Thu, 2007-12-06 at 22:35 +0300, momentics wrote:
> unsubscribe
-- 
Ned Ludd <solar@gentoo.org>
Gentoo Linux

-- 
gentoo-embedded@gentoo.org mailing list

[gentoo-embedded] unsubscribe

[Bill Dent]

unsubscribe
-- 
gentoo-embedded@gentoo.org mailing list

Re: [gentoo-embedded] unsubscribe

[Mike Frysinger]

[-- Attachment #1: Type: text/plain, Size: 180 bytes --]

On Saturday 29 September 2007, Bill Dent wrote:
> unsubscribe

this is not how you unsubscribe ... please read the mailing list page:
http://www.gentoo.org/main/en/lists.xml
-mike

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 827 bytes --]

[gentoo-embedded] Unsubscribe

[Carlos]

[-- Attachment #1: Type: text/plain, Size: 921 bytes --]

 Unsubscribe--- On Mon 03/26, Philipp Riegger < lists@anderedomain.de > wrote:

From: Philipp Riegger [mailto: lists@anderedomain.de]To: gentoo-embedded@lists.gentoo.orgDate: Mon, 26 Mar 2007 12:00:28 +0300Subject: Re: [gentoo-embedded] GNAP in Google SoCOn 26.03.2007, at 07:31, Mike Frysinger wrote:> well, it'll probably be best that if/when you start working on the> cross-compile support on catalyst, we do it together and/or over the> gentoo-embedded list since ive already started working on this ...>> no point in having you do a bunch of cross-compiling work for > catalyst to only> have it shot down ;)Sounds great.I'll write my application today and then hopefully we can work together soon.Philipp-- gentoo-embedded@gentoo.org mailing list

_______________________________________________
No banners. No pop-ups. No kidding.
Make My Way  your home on the Web - http://www.myway.com

[-- Attachment #2: Type: text/html, Size: 1413 bytes --]

[gentoo-embedded] unsubscribe

[Carlos]

[-- Attachment #1: Type: text/plain, Size: 506 bytes --]

 















unsubscribe--- On Tue 08/22, Carlos < lokutas@myway.com > wrote:

From: Carlos [mailto: lokutas@myway.com]To: gentoo-embedded@lists.gentoo.orgDate: Tue, 22 Aug 2006 18:37:29 -0400 (EDT)Subject: [gentoo-embedded] unsubscribe







unsubscribe





No banners. No pop-ups. No kidding.Make My Way your home on the Web - http://www.myway.com



_______________________________________________
No banners. No pop-ups. No kidding.
Make My Way  your home on the Web - http://www.myway.com

[-- Attachment #2: Type: text/html, Size: 1536 bytes --]

[gentoo-embedded] unsubscribe

[Shashidhara RaoB]

_________________________________________________________________
Live the life in style with MSN Lifestyle. Check out! 
http://content.msn.co.in/Lifestyle/Default

-- 
gentoo-embedded@gentoo.org mailing list

[gentoo-embedded] unsubscribe

[Christian Burger]

[-- Attachment #1: Type: text/plain, Size: 0 bytes --]



[-- Attachment #2: Type: text/html, Size: 280 bytes --]

[gentoo-embedded] UNSUBSCRIBE

[Christian Burger]

[-- Attachment #1: Type: text/plain, Size: 0 bytes --]



[-- Attachment #2: Type: text/html, Size: 280 bytes --]

[gentoo-embedded] unsubscribe

[Carlos]

[-- Attachment #1: Type: text/plain, Size: 155 bytes --]

 unsubscribe

_______________________________________________
No banners. No pop-ups. No kidding.
Make My Way  your home on the Web - http://www.myway.com

[-- Attachment #2: Type: text/html, Size: 390 bytes --]

[gentoo-embedded] unsubscribe

[Lee Azzarello]

-- 
gentoo-embedded@gentoo.org mailing list

[gentoo-embedded] unsubscribe

[Craig M. Ryder]

[-- Attachment #1: Type: text/plain, Size: 56 bytes --]

unsubscribe
 

<mailto:craig.m.ryder@l-3com.com> 


[-- Attachment #2: Type: text/html, Size: 822 bytes --]