Re: [gentoo-embedded] g++ not found after build armv4tl-softfloat-linux-gnueabi

[Ned Ludd <solar@gentoo.org>]

On Mon, 2009-12-28 at 00:11 +0200, Ahmed Ammar wrote:
> On Wed, 2009-12-23 at 11:01 +0200, Mirage . wrote:
> > Thank you all for your replies.
> > 
> > @Ahmed, The installed version is 20091209
> > and the command i used was crossdev  -s4  --target
> > armv4tl-softfloat-linux-gnueabi  --without-headers
> > the gcc version installed with cross-compiler is 4.3.4 and binutils is
> > 2.20
> > and the one installed on the host is 4.3.2 and binutils is 2.19
> 
> Mirage,
> 
> First, please don't top post ... it ruins everyone's formatting.
> 
> Ok I've hit this issue before, a while back (regarding s4 not producing
> a complete stage4 compiler) but never really looked into it, I have some
> more queries;
> 
>       * What are the contents
>         of: /etc/portage/package.*/cross-armv4tl-softfloat-linux-gnueabi
>       * Whats the output of: emerge --info -v
> 
> Temporarily you could try the following <after you saved the above output>:
> 
> # crossdev -s4 --ex-only --ex-gcc --target armv4tl-softfloat-linux-gnueabi
> 
> A.

I almost get the feeling she has USE nocxx or build set somewhere.. -s4
should of worked. More so after accomplishing the old headers trick.