* [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoolkit.xml
@ 2010-06-07 8:12 Joshua Saddler (nightmorph)
0 siblings, 0 replies; 5+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-06-07 8:12 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 10/06/07 08:12:32
Modified: gentoolkit.xml
Log:
remove dead link to the glsa-check document, bug 322465
Revision Changes Path
1.32 xml/htdocs/doc/en/gentoolkit.xml
file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.32&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.32&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?r1=1.31&r2=1.32
Index: gentoolkit.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v
retrieving revision 1.31
retrieving revision 1.32
diff -u -r1.31 -r1.32
--- gentoolkit.xml 20 May 2008 18:44:03 -0000 1.31
+++ gentoolkit.xml 7 Jun 2010 08:12:32 -0000 1.32
@@ -1,8 +1,8 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.31 2008/05/20 18:44:03 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.32 2010/06/07 08:12:32 nightmorph Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<guide link="/doc/en/gentoolkit.xml">
+<guide>
<title>Gentoolkit</title>
<author title="Author">
@@ -37,8 +37,8 @@
<!-- Licensed under GFDL -->
-<version>1.12</version>
-<date>2007-06-25</date>
+<version>1.13</version>
+<date>2010-06-07</date>
<chapter>
<title>Introduction</title>
@@ -722,11 +722,9 @@
<body>
<p>
-<c>glsa-check</c> is mainly a test tool that keeps track of the various GLSA's
+<c>glsa-check</c> is mainly a test tool that keeps track of the various GLSAs
(Gentoo Linux Security Advisory) and will eventually be integrated into
-<c>emerge</c> and <c>equery</c>. For more information, please visit the <uri
-link="/proj/en/portage/glsa-integration.xml">Portage GLSA Integration
-Page</uri>.
+<c>emerge</c> and <c>equery</c>.
</p>
</body>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoolkit.xml
@ 2011-08-14 17:02 Sven Vermeulen (swift)
0 siblings, 0 replies; 5+ messages in thread
From: Sven Vermeulen (swift) @ 2011-08-14 17:02 UTC (permalink / raw
To: gentoo-doc-cvs
swift 11/08/14 17:02:53
Modified: gentoolkit.xml
Log:
Bug #269071 - Many updates on gentoolkit.xml documentation, thanks to fuzzyray
Revision Changes Path
1.34 xml/htdocs/doc/en/gentoolkit.xml
file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.34&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.34&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?r1=1.33&r2=1.34
Index: gentoolkit.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v
retrieving revision 1.33
retrieving revision 1.34
diff -u -r1.33 -r1.34
--- gentoolkit.xml 3 Oct 2010 18:47:51 -0000 1.33
+++ gentoolkit.xml 14 Aug 2011 17:02:52 -0000 1.34
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.33 2010/10/03 18:47:51 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.34 2011/08/14 17:02:52 swift Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide>
@@ -29,6 +29,9 @@
<author title="Editor">
<mail link="nightmorph@gentoo.org">Joshua Saddler</mail>
</author>
+<author title="Editor">
+ <mail link="douglasjanderson@gmail.com">Douglas Anderson</mail>
+</author>
<abstract>
Gentoolkit is a suite of tools to ease the administration of a Gentoo system.
@@ -37,8 +40,8 @@
<!-- Licensed under GFDL -->
-<version>2</version>
-<date>2010-10-03</date>
+<version>3</version>
+<date>2011-06-24</date>
<chapter>
<title>Introduction</title>
@@ -88,7 +91,7 @@
<note>
Many of the tools in gentoolkit reveal important information about your system
or require root privilege. For that reason, some of the programs may only be
-executed (or only function properly) if run by a user with root permission.
+executed (or only function properly) if run by a user with root privileges.
</note>
</body>
@@ -113,305 +116,465 @@
<body>
<p>
-<c>equery</c> is a tool that displays a great deal of useful information about
-the packages on your system and much more. <c>equery --help</c> gives you the
-full set of options.
+<c>equery</c> is a tool that displays useful information about the packages on
+your system. <c>equery</c> is based on a system of modules.
+Every module has a shorthand name. For example, <c>equery l gcc</c> is the same
+as <c>equery list gcc</c>. <c>equery --help</c> explains global options
+and lists all available modules and their shorthand names.
+<c>equery --help module</c> will display the help screen for a specific
+module. Lastly, <c>man equery</c> provides a detailed explanation of all
+available modules and options, and provides useful examples.
</p>
-<note>
-Not all features listed by <c>equery --help</c> have been implemented yet.
-Those that have not been, are mentioned clearly. You will also see that
-every command has a short option, e.g. <c>b</c> instead of <c>belongs</c>.
-</note>
+<p>
+Below is a list of features that work over the majority of modules.
+</p>
+
+<pre caption="Examples of Acceptable Input">
+<comment>(Many modules require a package argument. equery accepts all emerge-like input):</comment>
+$ <i>equery --quiet list gcc</i> # <comment>package</comment>
+sys-devel/gcc-4.3.2-r3
+$ <i>equery --quiet list sys-devel/gcc</i> # <comment>category/package</comment>
+sys-devel/gcc-4.3.2-r3
+$ <i>equery --quiet list '>=sys-devel/gcc-4'</i> # <comment>atom syntax</comment>
+sys-devel/gcc-4.3.2-r3
+
+<comment>(Like emerge, equery doesn't understand partial package names):</comment>
+$ <i>equery check zilla</i>
+!!! No package found matching zilla
+
+<comment>(Unlike emerge, equery can accept shell-like globbing in the category and/or package name):</comment>
+$ <i>equery check '*zilla*'</i>
+ * Checking www-client/mozilla-firefox-3.0.14 ...
+ 90 out of 90 files passed
+$ <i>equery check www-c*/*</i>
+ * Checking www-client/links-2.2 ...
+ 30 out of 30 files passed
+ * Checking www-client/mozilla-firefox-3.0.14 ...
+ 90 out of 90 files passed
+
+<comment>(Most equery modules take multiple input):</comment>
+$ <i>equery hasuse sse sse2</i>
+ * Searching for USE flag sse ...
+[IP-] [ ] media-libs/flac-1.2.1-r3 (0)
+[IP-] [ ] media-libs/speex-1.2_beta3_p2 (0)
+
+ * Searching for USE flag sse2 ...
+[IP-] [ ] dev-libs/openssl-0.9.8k (0)
+[IP-] [ ] x11-libs/pixman-0.16.0 (0)
+
+<comment>(A few modules also allow full regular expressions):</comment>
+$ <i>equery -q list --portage-tree --full-regex '[kr]?flickr.*'</i>
+dev-dotnet/flickrnet-bin-2.2
+dev-ruby/flickr-1.0.2-r1
+dev-ruby/flickr-1.0.2-r2
+dev-ruby/rflickr-20060201
+media-gfx/kflickr-0.6
+[...]
+</pre>
<note>
-Be aware that equery currently changes the format of the output if it is sent
-through a pipe. The piped format is intended to be easier to parse by tools, but
-you can also turn it off by adding the <c>--no-pipe</c> option. If you write
-scripts that employ equery, you should be aware of this.
+Globbing support replaced a number of older options in <c>equery</c>.
+For example, to act on all packages in a certain set, use <c>'*'</c>.
+To act on all packages in a category, use <c>'category-name/*'</c>.
</note>
+<warn>
+Don't forget to quote input when using special shell characters
+like asterisks or greater than/less than signs.
+</warn>
+
+<p>
+The next few sections in this document give a quick introduction to the
+different <c>equery</c> modules.
+</p>
+
</body>
</section>
<section>
-<title>Finding the Package That a File Came From</title>
+<title>Finding the Package That a File Came From with belongs (b)</title>
<body>
+<pre caption="Finding the Package that Installed a Given File">
+$ <i>equery belongs -e /usr/bin/glxgears</i>
+ * Searching for /usr/bin/glxgears ...
+ x11-apps/mesa-progs-7.5.1 (/usr/bin/glxgears)
+</pre>
+
<p>
-<c>equery</c> also provides the functionality of finding the package that a
-file came from, using <c>belongs</c> command (or just <c>b</c>).
+<c>belongs</c> can search for files matching a regular expression with the
+<c>-f</c> option. The <c>-e</c> option stops searching after it finds a match.
+Since no file on your system should be owned by two packages, this is a safe
+optimization.
</p>
-<pre caption="Finding the ebuild that installed a given file">
-# <i>equery belongs /usr/bin/audacious</i>
-[ Searching for file(s) /usr/bin/audacious in *... ]
-media-sound/audacious-1.1.2 (/usr/bin/audacious)
-</pre>
+</body>
+</section>
+<section>
+<title>Viewing ChangeLog Entries with changes (c)</title>
+<body>
<p>
-By using the <c>-f</c> option, you may search for packages with files
-matching any regular expression. The <c>-e</c> option is useful for
-terminating your search immediately when a match is found.
+<c>changes</c> lets you view ChangeLog entries for a package version or range
+of versions. Imagine after an <c>emerge --sync</c>, you
+notice Portage is going to be upgraded and want to check what has changed:
</p>
+<pre caption="Viewing Gentoo ChangeLog Entries">
+<comment>(Show the latest installable version's entry):</comment>
+$ <i>equery changes portage</i>
+*portage-2.1.6.13 (03 May 2009)
+
+ 03 May 2009; Zac Medico <zmedico@gentoo.org> +portage-2.1.6.13.ebuild:
+ 2.1.6.13 bump. This fixes bug #268398 (document econf automatic die)
+ and bug #267104 (handle insufficient space interaction with userfetch).
+ Bug #268228 tracks all bugs fixed since 2.1.6.11.
+</pre>
+
</body>
</section>
<section>
-<title>Verifying Package Integrity</title>
+<title>Verifying Package Integrity with check (k)</title>
<body>
<p>
Sometimes it is useful to check a package's integrity. <c>equery</c> can
-verify md5 sums as well as timestamps to indicate when a package might
+verify MD5 sums as well as timestamps to indicate when a package might
have been corrupted, replaced, or removed.
</p>
-<pre caption="OK package integrity">
-# <i>equery check gentoolkit</i>
-[ Checking app-portage/gentoolkit-0.2.0 ]
- * 54 out of 54 files good
+<pre caption="Checking Package Integrity">
+$ <i>equery check gentoolkit</i>
+ * Checking app-portage/gentoolkit-0.3.0_rc7 ...
+ 71 out of 71 files passed
</pre>
-<p>
-Please note that if you change configuration files after installation,
-these may be reported as "not good".
-</p>
-
</body>
</section>
<section>
-<title>List of all packages depending on ...</title>
+<title>Listing All Packages Depending on Package X with depends (d)</title>
<body>
<p>
-<c>equery</c> is able to list all direct dependencies matching a package.
-The function we should use to do this is <c>depends</c> and it's as easy as:
+Ever wonder why a certain package has been installed on your system?
+<c>equery</c> can tell which packages list it as a dependency with
+<c>depends</c>. Include indirect dependencies with the <c>-D</c>
+option.
</p>
-<pre caption="Looking for packages depending on pygtk">
-# <i>equery depends pygtk</i>
-[ Searching for packages depending on pygtk... ]
-app-office/dia-0.93
-dev-python/gnome-python-2.0.0-r1
-gnome-extra/gdesklets-core-0.26.2
-media-gfx/gimp-2.0.4
-x11-libs/vte-0.11.11-r1
+<pre caption="Looking for Packages Depending on pygtk">
+$ <i>equery depends pygtk</i>
+ * Searching for pygtk ...
+app-admin/pessulus-2.24.0 (>=dev-python/pygtk-2.6.0)
+app-editors/gedit-2.24.3 (python ? >=dev-python/pygtk-2.12)
+dev-libs/libgweather-2.24.3 (python ? >=dev-python/pygtk-2)
+dev-python/gnome-python-base-2.22.3 (>=dev-python/pygtk-2.10.3)
+dev-python/gnome-python-desktop-base-2.24.1 (>=dev-python/pygtk-2.10.3)
+[...]
</pre>
</body>
</section>
<section>
-<title>Dependency Graphs</title>
+<title>Getting Dependency Graphs with depgraph (g)</title>
<body>
<p>
-<c>equery</c> is capable of giving us a dependency graph for a specified
-package. The dependency graph gives a listing of all the packages that have
-direct and indirect dependencies on the package in question.
-</p>
-
-<pre caption="Dependency Graph for cdrtools">
-# <i>equery depgraph cdrtools</i>
-Displaying dependencies for app-cdr/cdrtools-2.01_alpha37
-`-- app-cdr/cdrtools-2.01_alpha37
- `-- sys-libs/glibc-2.3.4.20040808 (virtual/libc)
- `-- sys-kernel/linux-headers-2.4.22 (virtual/os-headers)
- `-- sys-apps/baselayout-1.10.4
- `-- sys-apps/sysvinit-2.85-r1
- `-- sys-apps/gawk-3.1.3-r1
- `-- sys-apps/util-linux-2.12-r4
- `-- sys-apps/sed-4.0.9
- `-- sys-libs/ncurses-5.4-r4
- `-- sys-apps/pam-login-3.14
- `-- sys-libs/pam-0.77-r1
- `-- sys-libs/cracklib-2.7-r10
- `-- sys-apps/miscfiles-1.3-r1
- `-- app-arch/gzip-1.3.5-r1
- `-- sys-apps/portage-2.0.50-r10
+<c>depgraph</c> is the opposite of <c>depends</c>. You pass it a package, and
+it will find the packages <e>it</e> depends on (not that depend on it).
+When it finds a dependency, it will recursively search for all of
+<e>that</e> package's dependencies. Control how deep the tree gets with
+the <c>--depth</c> option.
+</p>
+
+<pre caption="Viewing Dependency Graph for cdrtools">
+$ <i>equery depgraph mozilla-firefox</i>
+ * Searching for mozilla-firefox ...
+ * dependency graph for www-client/mozilla-firefox-2.0.0.19:
+`-- www-client/mozilla-firefox-2.0.0.19
+ `-- virtual/jre-1.6.0 (virtual/jre) [java]
+ `-- virtual/jdk-1.6.0 (virtual/jdk-1.6.0*)
+ `-- dev-java/icedtea6-bin (unable to resolve: package masked or removed)
+ `-- dev-java/sun-jdk-1.6.0.15
+ `-- dev-java/java-sdk-docs-1.6.0.10 [doc]
+ `-- app-arch/unzip-6.0-r1
+ `-- app-arch/bzip2-1.0.5-r1 [bzip2]
+ `-- sys-libs/glibc-2.9_p20081201-r2
+ `-- sys-devel/gettext-0.17 [nls]
+ `-- virtual/libiconv-0 (virtual/libiconv)
+[...]
</pre>
<p>
-For example, while glibc is a direct dependency for cdrtools,linux-headers
-are an indirect dependency. Note that the output also includes information
-about virtual packages. In the example above, <c>cdrtools</c> is actually
-written to require virtual/libc, not sys-libs/glibc, but on the given
-system in the example sys-libs/glibc provides virtual/libc.
+Notice how <c>jre</c> is a direct dependency and <c>jdk</c> is an indirect
+dependency if the <c>java</c> USE flag is set.
</p>
</body>
</section>
<section>
-<title>Listing Files Belonging to an Ebuild</title>
+<title>Listing Files Installed by a Package with files (f)</title>
<body>
<p>
-<c>equery</c> can list the files that belong to an installed ebuild. If I
-don't know the files that Gentoolkit has installed on the system, I will
-use <c>equery</c> to show them.
-</p>
-
-<pre caption="Listing files">
-# <i>equery files gentoolkit</i>
-[ Searching for packages matching gentoolkit... ]
-app-portage/gentoolkit-0.2.0
-* Contents of app-portage/gentoolkit-0.2.0:
-/usr
-/usr/bin
-/usr/bin/equery
-/usr/bin/etcat
-/usr/bin/euse
-/usr/bin/glsa-check
-/usr/bin/qpkg
-/usr/bin/revdep-rebuild
-/usr/lib
-/usr/lib/gentoolkit
-/usr/lib/gentoolkit/pym
-/usr/lib/gentoolkit/pym/gentoolkit
-/usr/lib/gentoolkit/pym/gentoolkit/__init__.py
-/usr/lib/gentoolkit/pym/gentoolkit/gentoolkit.py
-/usr/lib/gentoolkit/pym/gentoolkit/pprinter.py
-/usr/lib/gentoolkit/pym/glsa.py
-/usr/sbin
-/usr/share
-/usr/share/doc
-/usr/share/doc/gentoolkit-0.2.0_pre10
-
+<c>equery</c> can list all the files installed by an ebuild with the
+<c>files</c> command. Try <c>--tree</c> to get an easy to read directory
+layout. Use <c>--filter</c> to only find a certain type of file. For example,
+to find where executables were installed, use <c>--filter=cmd</c>, and to
+quickly find the configuration file location, try <c>--filter=conf</c>.
+</p>
+
+<pre caption="Listing Installed Files in Tree Format">
+$ <i>equery files --tree gentoolkit</i>
+ * Searching for gentoolkit ...
+ * Contents of app-portage/gentoolkit-0.3.0_rc7:
+ /etc
+ > /eclean
+ + distfiles.exclude
+ + packages.exclude
+ > /env.d
+ + 99gentoolkit-env
+ > /revdep-rebuild
+ + 99revdep-rebuild
+ /usr
+ > /bin
+ + eclean
+ + eclean-dist -> eclean
+ + eclean-pkg -> eclean
+ + epkginfo
+ + equery
+ + eread
+ + euse
+ + glsa-check
+ + revdep-rebuild
+ > /lib
+ > /python2.6
+ > /site-packages
+ > /gentoolkit
+ + gentoolkit-0.3.0_rc7-py2.6.egg-info
+ + __init__.py
+ > /equery
+ + __init__.py
+ + belongs.py
+ + changes.py
+ + check.py
+ + depends.py
+ + depgraph.py
+ + files.py
[...]
</pre>
-<p>
-The command <c>files</c> of <c>equery</c> provide some options to modify
-the output. You can look them all up in the <c>equery</c> man page.
-</p>
-
</body>
</section>
<section>
-<title>Looking for packages that use a specific USE flag</title>
+<title>Looking for Packages that Have a Specific USE Flag with hasuse (h)</title>
<body>
<p>
-If you want to find which packages on your system that make use of a specific
-USE flag, <c>equery</c> has the function <c>hasuse</c>:
+You can use <c>hasuse</c> to find out which packages have a given USE flag.
+<c>hasuse</c> won't tell you if the flag is enabled, only if the ebuild lists
+it as an option. See the EXAMPLES section of <c>hasuse</c> in the
+<c>equery</c> man page for more tip on getting that information.
</p>
-<pre caption="Searching packages which use the firefox USE flag">
-# <i>equery hasuse firefox</i>
-[ Searching for USE flag firefox in all categories among: ]
- * installed packages
-[I--] [ ] dev-python/gnome-python-extras-2.14.0-r1 (0)
-[I--] [ ] media-video/totem-2.16.4 (0)
+<pre caption="Searching For Installed Packages that Use the qt3 or qt4 USE Flags">
+$ <i>equery hasuse qt3 qt4</i>
+ * Searching for USE flag qt3 ...
+[IP-] [ ] app-crypt/pinentry-0.7.5 (0)
+[IP-] [ ] net-dns/avahi-0.6.24-r2 (0)
+[IP-] [ ] net-wireless/wpa_supplicant-0.6.9 (0)
+
+ * Searching for USE flag qt4 ...
+[IP-] [ ] net-dns/avahi-0.6.24-r2 (0)
+[IP-] [ ] net-wireless/wpa_supplicant-0.6.9 (0)
</pre>
</body>
</section>
<section>
-<title>Listing Packages</title>
+<title>Listing Packages with list (l)</title>
<body>
<p>
-<c>equery</c> has a power feature to list packages belonging to our system,
-portage or even an overlay. Let's try this:
+<c>list</c> is a simple, yet powerful module to list packages that are installed,
+in the Portage tree or in an overlay.
</p>
-<pre caption="Listing packages with equery">
-# <i>equery list gentoolkit</i>
-[ Searching for package 'gentoolkit' in all categories among: ]
- * installed packages
-[I--] [ ] app-portage/gentoolkit-0.2.0 (0)
+<pre caption="Listing Installed Packages with list">
+$ <i>equery list '*'</i>
+ * Searching for * ...
+[IP-] [ ] app-admin/eselect-1.2.3 (0)
+[IP-] [ ] app-admin/eselect-ctags-1.10 (0)
+[IP-] [ ] app-admin/eselect-esd-20060719 (0)
+[IP-] [ ] app-admin/eselect-fontconfig-1.0 (0)
+[IP-] [ ] app-admin/eselect-opengl-1.0.8-r1 (0)
+[IP-] [ ] app-admin/eselect-python-20090824 (0)
+[IP-] [ ] app-admin/eselect-ruby-20081227 (0)
+[IP-] [ ] app-admin/eselect-vi-1.1.5 (0)
+[IP-] [ ] app-admin/perl-cleaner-1.05 (0)
+[IP-] [ ] app-admin/pessulus-2.24.0 (0)
+[IP-] [ ] app-admin/python-updater-0.7 (0)
+[IP-] [ ] app-admin/sudo-1.7.2_p1 (0)
+[...]
</pre>
<p>
-The standard query will search our installed packages for the name given.
-If found, the following info will be displayed: the package location between
-the first square brackets (I for Installed packages, P for Portage, O for
-Overlay), the possible masks between the second (~ by keyword, - by arch or
-M hard masked), then the category and complete name and last of all, the slot
-in which the package is stored.
+The standard query will search installed packages for the given package name.
+Passing in '*' displays all packages in the set. In the leftmost field, we
+see that all the above packages are <c>I</c>nstalled and from the <c>P</c>ortage
+tree. They're not masked (the second field is blank), and they're all installed
+in the default slot (0).
</p>
<p>
-Another example, this time we are going to use the local options in order
-to look for packages in our portage tree and overlay.
+This time we are going to use local options to look for packages in the
+Portage tree and overlays.
</p>
-<pre caption="Using local options with equery">
-# <i>equery list -p -o vim</i>
-[ Searching for package 'vim' in all categories among: ]
- * installed packages
-[I--] [ ] app-editors/vim-6.3-r4 (0)
- * Portage tree (/usr/portage)
-[-P-] [M~] app-editors/vim-7.0_alpha20050126 (0)
-[-P-] [M~] app-editors/vim-7.0_alpha20050201 (0)
-[-P-] [ ] app-editors/vim-6.3-r2 (0)
-[-P-] [M~] app-editors/vim-7.0_alpha20050122 (0)
-[-P-] [M~] app-editors/vim-core-7.0_alpha20050126 (0)
-[-P-] [ ] app-editors/vim-core-6.3-r3 (0)
-[-P-] [M~] app-editors/vim-core-7.0_alpha20050122 (0)
-[-P-] [M~] app-editors/vim-core-7.0_alpha20050201 (0)
-[-P-] [ ] app-editors/vim-core-6.3-r4 (0)
- * overlay tree (/opt/ebuilds)
+<pre caption="Using Local Options with list">
+$ <i>equery list -po vim</i>
+ * Searching for vim ...
+[-P-] [ ] app-editors/vim-7.0.235 (0)
+[-P-] [ ~] app-editors/vim-7.0.243 (0)
+[-P-] [ ] app-editors/vim-7.1.123 (0)
+[-P-] [ ~] app-editors/vim-7.1.330 (0)
+[-P-] [ ] app-editors/vim-7.2 (0)
+[-P-] [ ~] app-editors/vim-7.2.108 (0)
+[IP-] [ ] app-editors/vim-7.2.182 (0)
+[-P-] [ ~] app-editors/vim-7.2.238 (0)
+[-P-] [ ~] app-editors/vim-7.2.264 (0)
</pre>
+<p>
+In this example you can see version 7.2.182 is installed and there are no
+versions available from an overlay. You can see which versions are keyword
+masked by the <c>~</c> in the second field.
+</p>
+
</body>
</section>
<section>
-<title>Finding Package Sizes</title>
+<title>Viewing Package Metadata with meta (m)</title>
<body>
<p>
-Ever been curious to find out how much space a specific package is occupying?
-Since a package could have its files over a number of directories, the usual
-<c>du -hc</c> might not give you the correct figure. Not to worry, here comes
-<c>equery</c> to the rescue!
+Each package in the Portage tree provides at least some metadata about
+its maintainer, herd, etc. Read about <uri
+link="http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml?part=2&chap=4">Gentoo
+Metadata</uri>. The amount of useful information depends on how much package
+maintainers decide to provide. With no options, <c>meta</c> returns some basic
+useful information.
</p>
-<pre caption="Package Size">
-# <i>equery size openoffice-bin</i>
-* app-office/openoffice-bin-1.1.2
- Total Files : 2908
- Total Size : 223353.31 KiB
+<pre caption="Getting Package Metadata with meta">
+$ <i>equery meta gnucash</i>
+ * app-office/gnucash [gentoo]
+ Herd: gnome-office (gnome-office@gentoo.org)
+ Maintainer: tove@gentoo.org (Torsten Veller)
+ Upstream: None specified
+ Location: /usr/portage/app-office/gnucash
+ Keywords: 2.2.9-r1:0: alpha amd64 ppc sparc x86
+ Keywords: 2.2.9-r2:0:
+ Keywords: 2.3.8:0:
+ Keywords: 2.3.10:0: ~alpha ~amd64 ~ppc ~sparc ~x86
</pre>
<p>
-As you can see, <c>equery</c> prints the total space used in kilobytes and
-also lists the total number of files the package has.
+When the maintainer provides extra information, it can be very useful:
</p>
+<pre caption="Getting Long Package Descriptions with meta">
+$ <i>equery meta --description emacs</i>
+ * app-editors/emacs
+ GNU Emacs is an extensible, customizable text editor - and more. At its core
+ is an interpreter for Emacs Lisp, a dialect of the Lisp programming language
+ with extensions to support text editing. The features of GNU Emacs include:
+ * Content-sensitive editing modes, including syntax coloring, for a wide
+ variety of file types including plain text, source code, and HTML.
+ * Complete built-in documentation, including a tutorial for new users.
+ * Support for many languages and their scripts, including all the European
+ "Latin" scripts, Russian, Greek, Japanese, Chinese, Korean, Thai,
+ Vietnamese, Lao, Ethiopian, and some Indian scripts.
+ * Highly customizable, using Emacs Lisp code or a graphical customization
+ interface.
+ * A large number of extensions that add other functionality, including a
+ project planner, mail and news reader, debugger interface, calendar, and
+ more. Many of these extensions are distributed with GNU Emacs; others are
+ available separately.
+</pre>
+
</body>
</section>
<section>
-<title>Package-wise list of USE Flags</title>
+<title>Finding Package Sizes with size (s)</title>
<body>
<p>
-<c>equery</c> can be used to give us information about what USE flags
-are being used by a specific package. It also tells us what our current USE
-flags are for a package and also what USE flags are available for the package.
+Have you ever been curious to find out how much space a specific package is
+occupying? Since a package could have its files over a number of directories,
+the usual <c>du -hc</c> might not give you the correct figure. Not to worry,
+here comes <c>equery</c> to the rescue!
</p>
-<pre caption="Set and Unset USE Flags">
-# <i>equery uses wireshark</i>
-[ Colour Code : set unset ]
-[ Legend : (U) Col 1 - Current USE flags ]
-[ : (I) Col 2 - Installed With USE flags ]
+<pre caption="Displaying Package Size">
+$ <i>equery size openoffice-bin</i>
+ * app-office/openoffice-bin-3.1.1
+ Total files : 4624
+ Total size : 361.38 MiB
+</pre>
- U I [ Found these USE variables in : net-analyzer/wireshark-0.99.4 ]
- - - adns : Adds support for the adns DNS client library
- + + gtk : Adds support for x11-libs/gtk+ (The GIMP Toolkit)
- - - ipv6 : Adds support for IP version 6
- - - kerberos : Adds kerberos support
- - - portaudio : Adds support for the crossplatform portaudio audio API
- - - selinux : !!internal use only!! Security Enhanced Linux support, this must be set by the selinux profile or breakage will occur
- - - snmp : Adds support for the Simple Network Management Protocol if available
- + + ssl : Adds support for Secure Socket Layer connections
- - - threads : Adds threads support for various packages. Usually pthreads
+<p>
+As you can see, <c>size</c> prints the total space used in human-readable
+units and lists the total number of files the package has. To get the
+total size in bytes, use <c>--bytes</c>.
+</p>
+
+</body>
+</section>
+<section>
+<title>Listing Per-Package USE Flags with uses (u)</title>
+<body>
+
+<p>
+<c>equery</c>'s <c>uses</c> module can provide information about what USE
+flags are available for a specific package, and which of those flags is
+currently enabled.
+</p>
+
+<pre caption="Showing Set and Unset USE Flags">
+$ <i>equery uses gst-plugins-meta</i>
+ * Searching for gst-plugins-meta ...
+[ Legend : U - flag is set in make.conf ]
+[ : I - package is installed with flag ]
+[ Colors : set, unset ]
+ * Found these USE flags for media-plugins/gst-plugins-meta-0.10-r2:
+ U I
+ + + X : Adds support for X11
+ - - a52 : Enables support for decoding ATSC A/52 streams used in DVD
+ + + alsa : Adds support for media-libs/alsa-lib (Advanced Linux Sound
+ Architecture)
+ - - dvb : Adds support for DVB (Digital Video Broadcasting)
+ + + dvd : Adds support for DVDs
+ + + esd : Adds support for media-sound/esound (Enlightened Sound Daemon)
+ + + ffmpeg : Enable ffmpeg-based audio/video codec support
+ + + flac : Adds support for FLAC: Free Lossless Audio Codec
+ - - mad : Adds support for mad (high-quality mp3 decoder library and cli
+ frontend)
+ + + mpeg : Adds libmpeg3 support to various packages
+ - - mythtv : Support for retrieval from media-tv/mythtv backend
+ + + ogg : Adds support for the Ogg container format (commonly used by
+ Vorbis, Theora and flac)
+ - - oss : Adds support for OSS (Open Sound System)
+ + + theora : Adds support for the Theora Video Compression Codec
+ + + vorbis : Adds support for the OggVorbis audio codec
+ - - xv : Adds in optional support for the Xvideo extension (an X API for
+ video playback)
</pre>
<p>
-I have installed wireshark with only the gtk and ssl flags set, but there are
-several other USE flags for wireshark still available. For more information on
-USE flags, please refer to the <uri
+Here, a number of USE flags are enabled in <c>gstreamer</c>'s plugin
+meta-package, but you can see that there are other USE flags available.
+For more information on USE flags, please refer to the <uri
link="/doc/en/handbook/handbook-x86.xml?part=2&chap=2">USE Flags</uri>
chapter of the <uri link="/doc/en/handbook/">Gentoo Handbook</uri>.
</p>
@@ -419,20 +582,40 @@
</body>
</section>
<section>
-<title>Where's the ebuild?</title>
+<title>Finding the Ebuild Path with which (w)</title>
<body>
<p>
-We can also find out which ebuild is being used for a specific package using
-<c>equery</c>. This is done by using the <c>equery which</c> command which
-displays the full path to the ebuild.
+<c>which</c> is a simple script to help you quickly find the file path to an
+ebuild. If you pass an unversioned package name, <c>which</c> will return the
+path to the newest installable ebuild version, in other words, the ebuild
+Portage would use if you typed <c>emerge package</c>. Pass in a versioned
+package to get the path to that ebuild.
</p>
-<pre caption="Displaying the ebuild path">
-# <i>equery which cdrtools</i>
-/usr/portage/app-cdr/cdrtools/cdrtools-2.01_alpha37.ebuild
+<pre caption="Displaying the Latest Installable Ebuild Path">
+$ <i>equery which gnome</i>
+/usr/portage/gnome-base/gnome/gnome-2.26.3.ebuild
</pre>
+<p>
+Lastly, if none of the above features of <c>equery</c> have answered your
+question, try using <c>which</c> to manually search an ebuild with programs
+like <c>cat</c>, <c>less</c> or <c>grep</c>:
+</p>
+
+<pre caption="Other Useful Ways to Use which">
+$ <i>grep HOMEPAGE $(equery which gentoolkit)</i>
+HOMEPAGE="http://www.gentoo.org/proj/en/portage/tools/index.xml"
+</pre>
+
+<warn>
+Be aware that equery currently changes the format of the output if it is sent
+through a pipe. The piped format is intended to be easier to parse by tools, but
+you can also turn it off by adding the <c>--no-pipe</c> option. If you write
+scripts that employ equery, you should be aware of this.
+</warn>
+
</body>
</section>
</chapter>
@@ -643,7 +826,7 @@
This tool is Gentoo's Reverse Dependency rebuilder. It will scan your installed
ebuilds to find packages that have become broken as a result of an upgrade of a
package they depend on. It can emerge those packages for you but it can also
-happen that a given package does not work anymore with the currently installed
+happen that a given package does not work any more with the currently installed
dependencies, in which case you should upgrade the broken package to a more
recent version. revdep-rebuild will pass flags to emerge which lets you use the
<c>--pretend</c> flag to see what is going to be emerged again before you go any
@@ -653,61 +836,53 @@
<pre caption="Running revdep-rebuild in pretend mode">
# <i>revdep-rebuild -p</i>
-Checking reverse dependencies...
-Packages containing binaries and libraries broken by any package update,
-will be recompiled.
-
-Collecting system binaries and libraries... done.
- (/root/.revdep-rebuild.1_files)
-
-Collecting complete LD_LIBRARY_PATH... done.
- (/root/.revdep-rebuild.2_ldpath)
-
-Checking dynamic linking consistency...
- broken /usr/lib/ao/plugins-2/libarts.so (requires libartsc.so.0)
- broken /usr/lib/kde3/libkpresenterpart.so (requires libartskde.so.1 libqtmcop.so.1
- libsoundserver_idl.so.1 libkmedia2_idl.so.1 libartsflow.so.1 libartsflow_idl.so.1 libmcop.so.1)
- broken /usr/lib/ruby/site_ruby/1.8/i686-linux/fox.so (requires libFOX-1.0.so.0)
- broken /usr/lib/xine/plugins/1.0.0/xineplug_ao_out_arts.so (requires libartsc.so.0)
- broken /usr/lib/perl5/vendor_perl/5.8.0/i686-linux/auto/SDL_perl/SDL_perl.so (requires libSDL_gfx.so.0)
- broken /usr/lib/libloudmouth-1.so.0.0.0 (requires libgnutls.so.10)
- broken /usr/bin/k3b (requires libartskde.so.1 libqtmcop.so.1 libsoundserver_idl.so.1 libkmedia2_idl.so.1
- libartsflow.so.1 libartsflow_idl.so.1 libmcop.so.1)
- broken /usr/bin/lua (requires libhistory.so.4)
- broken /usr/bin/lyx (requires libAiksaurus-1.0.so.0)
- broken /usr/bin/luac (requires libhistory.so.4)
- broken /usr/bin/avidemux2 (requires libartsc.so.0)
- broken /usr/bin/pptout (requires libxml++-0.1.so.11)
- broken /usr/bin/xml2ps (requires libxml++-0.1.so.11)
- done.
- (/root/.revdep-rebuild.3_rebuild)
-
-Assigning files to ebuilds... done.
- (/root/.revdep-rebuild.4_ebuilds)
-
-Evaluating package order... done.
- (/root/.revdep-rebuild.5_order)
-
-All prepared. Starting rebuild...
-emerge --oneshot --nodeps -p =app-cdr/k3b-0.11.14 =app-office/koffice-1.3.2 =app-office/lyx-1.3.4 \
- =app-office/passepartout-0.2 =dev-lang/lua-5.0.2 =dev-ruby/fxruby-1.0.29 =media-libs/libao-0.8.5 \
- =media-libs/xine-lib-1_rc5-r3 =media-video/avidemux-2.0.26 =net-libs/loudmouth-0.16
-
-These are the packages that I would merge, in order:
-
-Calculating dependencies ...done!
-[ebuild R ] app-cdr/k3b-0.11.14
-[ebuild R ] app-office/koffice-1.3.2
-[ebuild R ] app-office/lyx-1.3.4
-[ebuild R ] app-office/passepartout-0.2
-[ebuild R ] dev-lang/lua-5.0.2
-[ebuild R ] dev-ruby/fxruby-1.0.29
-[ebuild R ] media-libs/libao-0.8.5
-[ebuild R ] media-libs/xine-lib-1_rc5-r3
-[ebuild R ] media-video/avidemux-2.0.26
-[ebuild R ] net-libs/loudmouth-0.16
+ * Configuring search environment for revdep-rebuild
-Now you can remove -p (or --pretend) from arguments and re-run revdep-rebuild.
+ * Checking reverse dependencies
+ * Packages containing binaries and libraries broken by a package update
+ * will be emerged.
+
+ * Collecting system binaries and libraries
+ * Generated new 1_files.rr
+ * Collecting complete LD_LIBRARY_PATH
+ * Generated new 2_ldpath.rr
+ * Checking dynamic linking consistency
+[ 48% ] * broken /usr/lib/gstreamer-0.10/libgsttaglib.la (requires /usr/lib/libtag.la)
+[ 64% ] * broken /usr/lib/libgdkglext-x11-1.0.la (requires /usr/lib/libGLU.la)
+[ 67% ] * broken /usr/lib/libgtkglext-x11-1.0.la (requires /usr/lib/libGLU.la)
+[ 85% ] * broken /usr/lib/python2.6/site-packages/gtk-2.0/gtk/gdkgl/_gdkgl.la (requires /usr/lib/libGLU.la)
+ * broken /usr/lib/python2.6/site-packages/gtk-2.0/gtk/gtkgl/_gtkgl.la (requires /usr/lib/libGLU.la)
+[ 97% ] * broken /usr/qt/3/lib/libqt-mt.la (requires -lpng)
+[ 100% ]
+ * Generated new 3_broken.rr
+ * Assigning files to packages
+ * /usr/lib/gstreamer-0.10/libgsttaglib.la -> media-plugins/gst-plugins-taglib
+ * /usr/lib/libgdkglext-x11-1.0.la -> x11-libs/gtkglext
+ * /usr/lib/libgtkglext-x11-1.0.la -> x11-libs/gtkglext
+ * /usr/lib/python2.6/site-packages/gtk-2.0/gtk/gdkgl/_gdkgl.la -> dev-python/pygtkglext
+ * /usr/lib/python2.6/site-packages/gtk-2.0/gtk/gtkgl/_gtkgl.la -> dev-python/pygtkglext
+ * /usr/qt/3/lib/libqt-mt.la -> x11-libs/qt
+ * Generated new 4_raw.rr and 4_owners.rr
+ * Cleaning list of packages to rebuild
+ * Generated new 4_pkgs.rr
+ * Assigning packages to ebuilds
+ * Generated new 4_ebuilds.rr
+ * Evaluating package order
+ * Generated new 5_order.rr
+ * All prepared. Starting rebuild
+emerge --oneshot --pretend dev-python/pygtkglext:0
+media-plugins/gst-plugins-taglib:0.10
+x11-libs/gtkglext:0
+x11-libs/qt:3
+
+These are the packages that would be merged, in order:
+
+Calculating dependencies... done!
+[ebuild R ] media-plugins/gst-plugins-taglib-0.10.17
+[ebuild R ] x11-libs/gtkglext-1.2.0
+[ebuild R ] x11-libs/qt-3.3.8b-r2
+[ebuild R ] dev-python/pygtkglext-1.1.0
+ * Now you can remove -p (or --pretend) from arguments and re-run revdep-rebuild.
</pre>
<p>
@@ -722,7 +897,7 @@
<body>
<p>
-<c>glsa-check</c> is mainly a test tool that keeps track of the various GLSAs
+<c>glsa-check</c> is mainly a test tool that keeps track of the various GLSA's
(Gentoo Linux Security Advisory) and will eventually be integrated into
<c>emerge</c> and <c>equery</c>.
</p>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoolkit.xml
@ 2011-08-15 19:29 Sven Vermeulen (swift)
0 siblings, 0 replies; 5+ messages in thread
From: Sven Vermeulen (swift) @ 2011-08-15 19:29 UTC (permalink / raw
To: gentoo-doc-cvs
swift 11/08/15 19:29:49
Modified: gentoolkit.xml
Log:
Updates on bug #269071 thanks to Chema Alonso (nimiux)
Revision Changes Path
1.35 xml/htdocs/doc/en/gentoolkit.xml
file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.35&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.35&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?r1=1.34&r2=1.35
Index: gentoolkit.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v
retrieving revision 1.34
retrieving revision 1.35
diff -u -r1.34 -r1.35
--- gentoolkit.xml 14 Aug 2011 17:02:52 -0000 1.34
+++ gentoolkit.xml 15 Aug 2011 19:29:48 -0000 1.35
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.34 2011/08/14 17:02:52 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.35 2011/08/15 19:29:48 swift Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide>
@@ -40,8 +40,8 @@
<!-- Licensed under GFDL -->
-<version>3</version>
-<date>2011-06-24</date>
+<version>4</version>
+<date>2011-08-15</date>
<chapter>
<title>Introduction</title>
@@ -287,7 +287,7 @@
the <c>--depth</c> option.
</p>
-<pre caption="Viewing Dependency Graph for cdrtools">
+<pre caption="Viewing Dependency Graph for mozilla-firefox">
$ <i>equery depgraph mozilla-firefox</i>
* Searching for mozilla-firefox ...
* dependency graph for www-client/mozilla-firefox-2.0.0.19:
@@ -318,7 +318,7 @@
<p>
<c>equery</c> can list all the files installed by an ebuild with the
-<c>files</c> command. Try <c>--tree</c> to get an easy to read directory
+<c>files</c> module. Try <c>--tree</c> to get an easy to read directory
layout. Use <c>--filter</c> to only find a certain type of file. For example,
to find where executables were installed, use <c>--filter=cmd</c>, and to
quickly find the configuration file location, try <c>--filter=conf</c>.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoolkit.xml
@ 2011-08-15 19:30 Sven Vermeulen (swift)
0 siblings, 0 replies; 5+ messages in thread
From: Sven Vermeulen (swift) @ 2011-08-15 19:30 UTC (permalink / raw
To: gentoo-doc-cvs
swift 11/08/15 19:30:36
Modified: gentoolkit.xml
Log:
Coding style updates, thanks to Chema Alonso (nimiux)
Revision Changes Path
1.36 xml/htdocs/doc/en/gentoolkit.xml
file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.36&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.36&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?r1=1.35&r2=1.36
Index: gentoolkit.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v
retrieving revision 1.35
retrieving revision 1.36
diff -u -r1.35 -r1.36
--- gentoolkit.xml 15 Aug 2011 19:29:48 -0000 1.35
+++ gentoolkit.xml 15 Aug 2011 19:30:36 -0000 1.36
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.35 2011/08/15 19:29:48 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.36 2011/08/15 19:30:36 swift Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide>
@@ -41,7 +41,7 @@
<!-- Licensed under GFDL -->
<version>4</version>
-<date>2011-08-15</date>
+<date>2011-08-16</date>
<chapter>
<title>Introduction</title>
@@ -117,10 +117,10 @@
<p>
<c>equery</c> is a tool that displays useful information about the packages on
-your system. <c>equery</c> is based on a system of modules.
+your system. <c>equery</c> is based on a system of modules.
Every module has a shorthand name. For example, <c>equery l gcc</c> is the same
as <c>equery list gcc</c>. <c>equery --help</c> explains global options
-and lists all available modules and their shorthand names.
+and lists all available modules and their shorthand names.
<c>equery --help module</c> will display the help screen for a specific
module. Lastly, <c>man equery</c> provides a detailed explanation of all
available modules and options, and provides useful examples.
@@ -155,11 +155,11 @@
<comment>(Most equery modules take multiple input):</comment>
$ <i>equery hasuse sse sse2</i>
- * Searching for USE flag sse ...
+ * Searching for USE flag sse ...
[IP-] [ ] media-libs/flac-1.2.1-r3 (0)
[IP-] [ ] media-libs/speex-1.2_beta3_p2 (0)
- * Searching for USE flag sse2 ...
+ * Searching for USE flag sse2 ...
[IP-] [ ] dev-libs/openssl-0.9.8k (0)
[IP-] [ ] x11-libs/pixman-0.16.0 (0)
@@ -175,12 +175,12 @@
<note>
Globbing support replaced a number of older options in <c>equery</c>.
-For example, to act on all packages in a certain set, use <c>'*'</c>.
+For example, to act on all packages in a certain set, use <c>'*'</c>.
To act on all packages in a category, use <c>'category-name/*'</c>.
</note>
<warn>
-Don't forget to quote input when using special shell characters
+Don't forget to quote input when using special shell characters
like asterisks or greater than/less than signs.
</warn>
@@ -197,7 +197,7 @@
<pre caption="Finding the Package that Installed a Given File">
$ <i>equery belongs -e /usr/bin/glxgears</i>
- * Searching for /usr/bin/glxgears ...
+ * Searching for /usr/bin/glxgears ...
x11-apps/mesa-progs-7.5.1 (/usr/bin/glxgears)
</pre>
@@ -216,7 +216,7 @@
<p>
<c>changes</c> lets you view ChangeLog entries for a package version or range
-of versions. Imagine after an <c>emerge --sync</c>, you
+of versions. Imagine after an <c>emerge --sync</c>, you
notice Portage is going to be upgraded and want to check what has changed:
</p>
@@ -284,7 +284,7 @@
it will find the packages <e>it</e> depends on (not that depend on it).
When it finds a dependency, it will recursively search for all of
<e>that</e> package's dependencies. Control how deep the tree gets with
-the <c>--depth</c> option.
+the <c>--depth</c> option.
</p>
<pre caption="Viewing Dependency Graph for mozilla-firefox">
@@ -373,18 +373,18 @@
<p>
You can use <c>hasuse</c> to find out which packages have a given USE flag.
<c>hasuse</c> won't tell you if the flag is enabled, only if the ebuild lists
-it as an option. See the EXAMPLES section of <c>hasuse</c> in the
+it as an option. See the EXAMPLES section of <c>hasuse</c> in the
<c>equery</c> man page for more tip on getting that information.
</p>
<pre caption="Searching For Installed Packages that Use the qt3 or qt4 USE Flags">
$ <i>equery hasuse qt3 qt4</i>
- * Searching for USE flag qt3 ...
+ * Searching for USE flag qt3 ...
[IP-] [ ] app-crypt/pinentry-0.7.5 (0)
[IP-] [ ] net-dns/avahi-0.6.24-r2 (0)
[IP-] [ ] net-wireless/wpa_supplicant-0.6.9 (0)
- * Searching for USE flag qt4 ...
+ * Searching for USE flag qt4 ...
[IP-] [ ] net-dns/avahi-0.6.24-r2 (0)
[IP-] [ ] net-wireless/wpa_supplicant-0.6.9 (0)
</pre>
@@ -396,8 +396,8 @@
<body>
<p>
-<c>list</c> is a simple, yet powerful module to list packages that are installed,
-in the Portage tree or in an overlay.
+<c>list</c> is a simple, yet powerful module to list packages that are
+installed, in the Portage tree or in an overlay.
</p>
<pre caption="Listing Installed Packages with list">
@@ -420,7 +420,7 @@
<p>
The standard query will search installed packages for the given package name.
-Passing in '*' displays all packages in the set. In the leftmost field, we
+Passing in '*' displays all packages in the set. In the leftmost field, we
see that all the above packages are <c>I</c>nstalled and from the <c>P</c>ortage
tree. They're not masked (the second field is blank), and they're all installed
in the default slot (0).
@@ -447,7 +447,7 @@
<p>
In this example you can see version 7.2.182 is installed and there are no
-versions available from an overlay. You can see which versions are keyword
+versions available from an overlay. You can see which versions are keyword
masked by the <c>~</c> in the second field.
</p>
@@ -459,11 +459,11 @@
<p>
Each package in the Portage tree provides at least some metadata about
-its maintainer, herd, etc. Read about <uri
-link="http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml?part=2&chap=4">Gentoo
-Metadata</uri>. The amount of useful information depends on how much package
-maintainers decide to provide. With no options, <c>meta</c> returns some basic
-useful information.
+its maintainer, herd, etc. Read about <uri
+link="http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml?part=2&chap=4">
+Gentoo Metadata</uri>. The amount of useful information depends on how much
+package maintainers decide to provide. With no options, <c>meta</c> returns
+some basic useful information.
</p>
<pre caption="Getting Package Metadata with meta">
@@ -474,8 +474,8 @@
Upstream: None specified
Location: /usr/portage/app-office/gnucash
Keywords: 2.2.9-r1:0: alpha amd64 ppc sparc x86
- Keywords: 2.2.9-r2:0:
- Keywords: 2.3.8:0:
+ Keywords: 2.2.9-r2:0:
+ Keywords: 2.3.8:0:
Keywords: 2.3.10:0: ~alpha ~amd64 ~ppc ~sparc ~x86
</pre>
@@ -599,7 +599,7 @@
</pre>
<p>
-Lastly, if none of the above features of <c>equery</c> have answered your
+Lastly, if none of the above features of <c>equery</c> have answered your
question, try using <c>which</c> to manually search an ebuild with programs
like <c>cat</c>, <c>less</c> or <c>grep</c>:
</p>
@@ -610,10 +610,10 @@
</pre>
<warn>
-Be aware that equery currently changes the format of the output if it is sent
-through a pipe. The piped format is intended to be easier to parse by tools, but
-you can also turn it off by adding the <c>--no-pipe</c> option. If you write
-scripts that employ equery, you should be aware of this.
+Be aware that <c>equery</c> currently changes the format of the output if it
+is sent through a pipe. The piped format is intended to be easier to parse by
+tools, but you can also turn it off by adding the <c>--no-pipe</c> option. If
+you write scripts that employ <c>equery</c>, you should be aware of this.
</warn>
</body>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoolkit.xml
@ 2012-12-01 7:32 Joshua Saddler (nightmorph)
0 siblings, 0 replies; 5+ messages in thread
From: Joshua Saddler (nightmorph) @ 2012-12-01 7:32 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 12/12/01 07:32:16
Modified: gentoolkit.xml
Log:
use devmanual instead of deprecated devrel handbook for metadata.xml info, bug 445352
Revision Changes Path
1.38 xml/htdocs/doc/en/gentoolkit.xml
file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.38&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?rev=1.38&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoolkit.xml?r1=1.37&r2=1.38
Index: gentoolkit.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v
retrieving revision 1.37
retrieving revision 1.38
diff -u -r1.37 -r1.38
--- gentoolkit.xml 24 Jul 2012 12:12:51 -0000 1.37
+++ gentoolkit.xml 1 Dec 2012 07:32:16 -0000 1.38
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.37 2012/07/24 12:12:51 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoolkit.xml,v 1.38 2012/12/01 07:32:16 nightmorph Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide>
@@ -40,8 +40,8 @@
<!-- Licensed under GFDL -->
-<version>5</version>
-<date>2012-07-24</date>
+<version>6</version>
+<date>2012-11-30</date>
<chapter>
<title>Introduction</title>
@@ -460,7 +460,7 @@
<p>
Each package in the Portage tree provides at least some metadata about
its maintainer, herd, etc. Read about <uri
-link="http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml?part=2&chap=4">
+link="http://devmanual.gentoo.org/ebuild-writing/misc-files/metadata/index.html">
Gentoo Metadata</uri>. The amount of useful information depends on how much
package maintainers decide to provide. With no options, <c>meta</c> returns
some basic useful information.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-12-01 9:03 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-01 7:32 [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoolkit.xml Joshua Saddler (nightmorph)
-- strict thread matches above, loose matches on Subject: below --
2011-08-15 19:30 Sven Vermeulen (swift)
2011-08-15 19:29 Sven Vermeulen (swift)
2011-08-14 17:02 Sven Vermeulen (swift)
2010-06-07 8:12 Joshua Saddler (nightmorph)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox