* [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoo-sparc-netboot-howto.xml
@ 2009-12-14 21:35 Joshua Saddler (nightmorph)
0 siblings, 0 replies; 3+ messages in thread
From: Joshua Saddler (nightmorph) @ 2009-12-14 21:35 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 09/12/14 21:35:05
Modified: gentoo-sparc-netboot-howto.xml
Log:
Update sparc netboot howto with hexadecimal conversion notes, bug 296744
Revision Changes Path
1.11 xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml?rev=1.11&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml?rev=1.11&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml?r1=1.10&r2=1.11
Index: gentoo-sparc-netboot-howto.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml,v
retrieving revision 1.10
retrieving revision 1.11
diff -u -r1.10 -r1.11
--- gentoo-sparc-netboot-howto.xml 20 May 2008 18:46:15 -0000 1.10
+++ gentoo-sparc-netboot-howto.xml 14 Dec 2009 21:35:05 -0000 1.11
@@ -1,13 +1,12 @@
<?xml version='1.0' encoding="UTF-8"?>
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml,v 1.10 2008/05/20 18:46:15 swift Exp $ -->
-
-<guide link="/doc/en/gentoo-sparc-netboot-howto.xml">
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml,v 1.11 2009/12/14 21:35:05 nightmorph Exp $ -->
+<guide>
<title>Gentoo Linux based Netboot HOWTO</title>
<author title="SPARC Developer">
- <mail link="weeve@gentoo.org">Jason Wever</mail>
+ <mail link="weeve"/>
</author>
<abstract>
@@ -19,8 +18,8 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.2</version>
-<date>2005-08-18</date>
+<version>1.3</version>
+<date>2009-12-14</date>
<chapter>
<title>Introduction</title>
@@ -474,26 +473,14 @@
</p>
<p>
-A guide on how to convert decimal to hexadecimal is available at
-<uri>http://www.permadi.com/tutorial/numDecToHex/</uri>
-</p>
-
-<p>
-And for the lazy/impatient, you can find a decimal to hexadecimal conversion
-tool at <uri>http://dan.drydog.com/hextemp.html</uri>
-</p>
-
-<note>
-For each octet in the IP address (the 10 in 10.0.1.15 for instance), you will
-need to convert it to hexadecimal, rather than converting the IP address asa
-singular number.
-</note>
-
-<p>
So for our example IP address, 10.0.1.15, let's look at its hexadecimal
-equivalent;
+equivalent:
</p>
+<pre caption="Convert to hexadecimal">
+# <i>printf "%.2x%.2x%.2x%.2x\n" 10 0 1 15</i>
+</pre>
+
<pre caption="Example IP address">
decimal 10 0 1 15
hexadecimal 0A 00 01 0F
@@ -704,5 +691,4 @@
</body>
</section>
</chapter>
-
</guide>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoo-sparc-netboot-howto.xml
@ 2010-03-03 1:37 Joshua Saddler (nightmorph)
0 siblings, 0 replies; 3+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-03-03 1:37 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 10/03/03 01:37:42
Modified: gentoo-sparc-netboot-howto.xml
Log:
HUGE cleanup for the sparc netboot doc. a ridiculous number of changes big and small. ugh. bug 296744
Revision Changes Path
1.12 xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml?rev=1.12&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml?rev=1.12&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml?r1=1.11&r2=1.12
Index: gentoo-sparc-netboot-howto.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml,v
retrieving revision 1.11
retrieving revision 1.12
diff -u -r1.11 -r1.12
--- gentoo-sparc-netboot-howto.xml 14 Dec 2009 21:35:05 -0000 1.11
+++ gentoo-sparc-netboot-howto.xml 3 Mar 2010 01:37:41 -0000 1.12
@@ -1,6 +1,6 @@
<?xml version='1.0' encoding="UTF-8"?>
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml,v 1.11 2009/12/14 21:35:05 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml,v 1.12 2010/03/03 01:37:41 nightmorph Exp $ -->
<guide>
<title>Gentoo Linux based Netboot HOWTO</title>
@@ -8,6 +8,9 @@
<author title="SPARC Developer">
<mail link="weeve"/>
</author>
+<author title="Editor">
+ <mail link="nightmorph"/>
+</author>
<abstract>
Guide for setting up a netboot server for use with the Gentoo/SPARC netboot
@@ -18,8 +21,8 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.3</version>
-<date>2009-12-14</date>
+<version>1.4</version>
+<date>2010-03-02</date>
<chapter>
<title>Introduction</title>
@@ -55,14 +58,14 @@
<li>A server machine returns a response to the client with the IP address</li>
<li>
The client then attempts to download a boot image from the RARP server
- using the tftp protocol
+ using the TFTP protocol
</li>
<li>Once the image is downloaded, the netboot client then boots the image</li>
</ol>
<p>
Based on this overview, we will need to install software for a reverse ARP
-daemon and a tftp daemon.
+daemon and a TFTP daemon.
</p>
</body>
@@ -77,12 +80,13 @@
<p>
Currently, there are two choices for a reverse ARP daemon. They are
-net-misc/iputils (installed as part of the system profile) and net-misc/rarpd.
+<c>net-misc/iputils</c> (installed as part of the system profile) and
+<c>net-misc/rarpd</c>.
</p>
<note>
-Installing net-misc/rarpd will overwrite the rarpd and rarpd manpage from
-net-misc/iputils
+Installing <c>net-misc/rarpd</c> will overwrite the <c>rarpd</c> and
+<c>rarpd</c> manpage from <c>net-misc/iputils</c>.
</note>
<p>
@@ -90,9 +94,9 @@
</p>
<p>
-No matter which rarpd you choose to use, you will need to setup the
-<path>/etc/ethers</path> file. This file indicates which hosts rarpd should
-respond to when a request is seen, and what address to reply with.
+No matter which <c>rarpd</c> you choose to use, you will need to setup the
+<path>/etc/ethers</path> file. This file indicates which hosts <c>rarpd</c>
+should respond to when a request is seen, and what address to reply with.
</p>
<p>
@@ -113,8 +117,8 @@
<p>
If you desire to add additional hosts to <path>/etc/ethers</path>, you do not
-need to restart the rarpd services as the file is checked each time a request
-is received.
+need to restart the <c>rarpd</c> services as the file is checked each time a
+request is received.
</p>
<p>
@@ -164,11 +168,12 @@
</p>
<p>
-First, we will need to determine the options to use for rarpd. While there are
-more options than we'll cover here, these options should get you started As
-there is currently no init.d script for net-misc/iputils version of rarpd, an
-entry will need to be added to <path>/etc/conf.d/local.start</path> if you want
-to enable rarpd servies at boot time. A sample entry is as follows;
+First, we will need to determine the options to use for <c>rarpd</c>. While
+there are more options than we'll cover here, these options should get you
+started As there is currently no <path>init.d</path> script for the
+<c>net-misc/iputils</c> version of <c>rarpd</c>, an entry will need to be added
+to <path>/etc/conf.d/local.start</path> if you want to enable <c>rarpd</c>
+services at boot time. A sample entry is as follows:
</p>
<pre caption="/etc/conf.d/local.start">
@@ -176,20 +181,21 @@
</pre>
<p>
-An explanation of the above rarpd options (as taken from the man page):
+An explanation of the above <c>rarpd</c> options (as taken from the man page):
</p>
<ul>
- <li>-v Be verbose</li>
+ <li><c>-v</c> Be verbose</li>
<li>
- -e Do not check for the presence of a boot image, reply if MAC address
- resolves to a valid IP address using /etc/ethers database and DNS
+ <c>-e</c> Do not check for the presence of a boot image, reply if MAC
+ address resolves to a valid IP address using <path>/etc/ethers</path>
+ database and DNS
</li>
- <li>eth0 represents the interface rarpd should bind to</li>
+ <li>eth0 represents the interface <c>rarpd</c> should bind to</li>
</ul>
<p>
-For more options, consult the section 8 man page on rarpd.
+For more options, consult <c>man 8 rarpd</c>.
</p>
<p>
@@ -197,7 +203,7 @@
</p>
<p>
-Firstly, we'll need to install rarpd with the following command:
+Firstly, we'll need to install <c>rarpd</c> with the following command:
</p>
<pre caption="Installing rarpd">
@@ -205,9 +211,10 @@
</pre>
<p>
-Next, options for rarpd will need to be set in <path>/etc/conf.d/rarpd</path>.
-For an equivalent configuration as the one used above for net-misc/iputils
-rarpd, adjust <path>/etc/conf.d/rarpd</path> to look like the following
+Next, options for <c>rarpd</c> will need to be set in
+<path>/etc/conf.d/rarpd</path>. For an equivalent configuration as the one used
+above for the <c>net-misc/iputils</c> <c>rarpd</c>, adjust
+<path>/etc/conf.d/rarpd</path> to look like the following
</p>
<pre caption="/etc/conf.d/rarpd">
@@ -223,13 +230,13 @@
<c>-v</c> Be verbose. Show requests which the daemon is responding to
</li>
<li>
- <c>-i</c> Bind to the named interface. By default rarpd binds to the
+ <c>-i</c> Bind to the named interface. By default <c>rarpd</c> binds to the
default interface for the local system type, if available
</li>
</ul>
<p>
-For more options, consult the section 8 man page on rarpd and rarpd --help.
+For more options, consult <c>man 8 rarpd</c> and <c>rarpd --help</c>.
</p>
</body>
@@ -239,9 +246,9 @@
<body>
<p>
-Here there are three options for a tftp daemon, net-misc/atftp,
-net-misc/netkit-tftp and net-misc/tftp-hpa. You only need to install one of the
-tftp daemons for proper operation.
+Here there are three options for a TFTP daemon, <c>net-misc/atftp</c>,
+<c>net-misc/netkit-tftp</c> and <c>net-misc/tftp-hpa</c>. You only need to
+install one of the TFTP daemons for proper operation.
</p>
<p>
@@ -249,16 +256,17 @@
</p>
<p>
-Each tftp daemon will need a directory from which to serve files to tftp
-clients. The directory we will use for this howto will be /tftpboot. This will
-appear as the root (<path>/</path>) directory to the clients when requests are
-received. Additionally, we'll setup the system to run the tftp daemon with the
-user and group nobody.
+Each TFTP daemon will need a directory from which to serve files to tftp
+clients. The directory we will use for this howto will be
+<path>/tftpboot</path>. This will appear as the root (<path>/</path>) directory
+to the clients when requests are received. Additionally, we'll setup the system
+to run the TFTP daemon with the user and group <c>nobody</c>.
</p>
<p>
If the directory you have chosen does not currently exist, it will need to be
-created with the mkdir command. The command for the example /tftpboot is;
+created with the <c>mkdir</c> command. The command for the example
+<path>/tftpboot</path> is:
</p>
<pre caption="Creating /tftpboot">
@@ -267,7 +275,7 @@
<p>
Then we will need to change the owner of <path>/tftpboot</path> so that it is
-owned by user nobody and group nobody;
+owned by user nobody and group <c>nobody</c>:
</p>
<pre caption="Changing ownership">
@@ -281,7 +289,7 @@
<body>
<p>
-First, install the net-misc/atftp package as follows;
+First, install the <c>net-misc/atftp</c> package as follows;
</p>
<pre caption="Installing atftp">
@@ -289,15 +297,17 @@
</pre>
<p>
-After the net-misc/atftp package has been installed, it will need to be
+After the <c>net-misc/atftp</c> package has been installed, it will need to be
configured. If tftpd services are desired at boot time, an entry to
-<path>/etc/conf.d/local.start</path> will need to be added as atftp has no
-init.d, inetd or xinetd scripts of its own. If you want to use inetd or xinetd
-for controlling the tftpd service, please see their respective man pages.
+<path>/etc/conf.d/local.start</path> will need to be added as <c>atftp</c> has
+no <path>init.d</path>, <c>inetd</c> or <c>xinetd</c> scripts of its own. If you
+want to use <c>inetd</c> or <c>xinetd</c> for controlling the tftpd service,
+please see their respective man pages.
</p>
<p>
-Below is an example entry for atftpd in <path>/etc/conf.d/local.start</path>;
+Below is an example entry for <c>atftpd</c> in
+<path>/etc/conf.d/local.start</path>.
</p>
<pre caption="/etc/conf.d/local.start">
@@ -305,7 +315,7 @@
</pre>
<p>
-An explanation of the above rarpd options (as taken from the man page);
+An explanation of the above <c>rarpd</c> options (as taken from the man page);
</p>
<ul>
@@ -321,7 +331,7 @@
</ul>
<p>
-For more options, consult the section 8 man page on atftpd.
+For more options, consult <c>man 8 atftpd</c>.
</p>
</body>
@@ -331,7 +341,7 @@
<body>
<p>
-First, install the net-misc/netkit-tftp package as follows;
+First, install the <c>net-misc/netkit-tftp</c> package:
</p>
<pre caption="Installing netkit-tftp">
@@ -339,11 +349,11 @@
</pre>
<p>
-Secondly, install sys-apps/xinetd if it is not currently present; After the
-net-misc/netkit-tftp and sys-apps/xinetd packages have been installed,
-netkit-tftp will need to be configured. netkit-tftp needs to be run from
-xinetd, however it does not provide example scripts of its own. A sample xinetd
-file is provided below;
+Second, install <c>sys-apps/xinetd</c> if it is not currently present. After
+the <c>net-misc/netkit-tftp</c> and <c>sys-apps/xinetd</c> packages have been
+installed, <c>netkit-tftp</c> will need to be configured. <c>netkit-tftp</c>
+needs to be run from <c>xinetd</c>, however it does not provide example scripts
+of its own. A sample <c>xinetd</c> file is provided below:
</p>
<pre caption="Sample /etc/xinetd.d/tftp file">
@@ -363,28 +373,36 @@
</pre>
<note>
-This sample xinetd configuration file for tftp uses the line "disable = no",
-which enables the service by default. This is opposite of the default way
-packages in Gentoo provide their respective xinetd configuration files, which
-have disable set to yes.
+This sample <c>xinetd</c> configuration file for tftp uses the line <c>disable =
+no</c>, which enables the service by default. This is opposite of the default
+way packages in Gentoo provide their respective <c>xinetd</c> configuration
+files, which have <c>disable</c> set to <c>yes</c>.
</note>
<p>
-An explanation of the above options which can be changed;
-user user in.tftpd requests are handled as
-group group in.tftpd requests are handled as
-server_args root directory for tftp daemon to serve files from
-only_from tells xinetd what hosts to allow tftp connections from
+An explanation of the above options which can be changed:
</p>
+<ul>
+ <li><b>user</b>: the user in.tftpd requests are handled as</li>
+ <li><b>group</b>: the group in.tftpd requests are handled as</li>
+ <li>
+ <b>server_args</b>: the root directory for the TFTP daemon to serve files
+ from
+ </li>
+ <li>
+ <b>only_from</b>: tells xinetd which hosts to allow TFTP connections from
+ </li>
+</ul>
+
<p>
-Additional information on xinetd configuration files can be found in the
-section 5 manpage on xinetd.conf
+Additional information on <c>xinetd</c> configuration files can be found in
+<c>man 5 xinetd.conf</c>.
</p>
<p>
-If xinetd is running, you can send it the HUP signal to have it re-read its
-configuration files;
+If <c>xinetd</c> is running, you can send it the HUP signal to have it re-read
+its configuration files:
</p>
<pre caption="Sending HUP signal to xinetd">
@@ -392,7 +410,7 @@
</pre>
<p>
-If xinetd is not running, start it with the init.d command;
+If <c>xinetd</c> is not running, start it with the init.d command:
</p>
<pre caption="Starting xinetd">
@@ -400,7 +418,7 @@
</pre>
<p>
-For more information, consult the section 8 man page on in.tftpd
+For more information, consult <c>man 8 in.tftpd</c>.
</p>
</body>
@@ -410,7 +428,7 @@
<body>
<p>
-First, install the tftp-hpa package using the following command;
+First, install the <c>tftp-hpa</c> package:
</p>
<pre caption="Installing tftp-hpa">
@@ -418,9 +436,9 @@
</pre>
<p>
-tftp-hpa comes with an init.d and the accompanying conf.d configuration file.
-Check to make sure that INIITFTPD_PATH and INITFTP_OPTS in
-<path>/etc/conf.d/in.tftpd</path> match those below;
+<c>tftp-hpa</c> comes with an <path>init.d</path> and the accompanying
+<path>conf.d</path> configuration file. Check to make sure that INTFTPD_PATH
+and INTFTP_OPTS in <path>/etc/conf.d/in.tftpd</path> match those below:
</p>
<pre caption="/etc/conf.d/in.tftpd">
@@ -429,7 +447,7 @@
</pre>
<p>
-The tftp daemon can then be started via the init.d script;
+The TFTP daemon can then be started via the <path>init.d</path> script:
</p>
<pre caption="Starting in.tftpd">
@@ -437,7 +455,7 @@
</pre>
<p>
-For more options, consult the section 8 man page on tftpd.
+For more options, consult <c>man 8 tftpd</c>.
</p>
</body>
@@ -450,23 +468,24 @@
<body>
<p>
-Make sure you have an image you want to use for netbooting. For a sparc or
-sparc64 netboot image, please check your local Gentoo distfiles mirror under
-<path>experimental/sparc/tftpboot</path> for the appropriate image. We'll
-assume you are planning to boot a sparc64 host using the
-<path>gentoo-sparc64-1.4_rc4-20040102.tftpboot</path> image.
+Make sure you have an image you want to use for netbooting. Please check your
+<uri link="/main/en/mirrors.xml">local</uri> Gentoo <uri
+link="http://distfiles.gentoo.org/experimental/sparc/tftpboot/sparc64/">distfiles
+mirror</uri> for the appropriate image. We'll assume you are planning to boot
+using the <path>gentoo-sparc64-20100128.tftpboot</path> image.
</p>
<p>
-Once you have an image, copy the image into <path>/tftpboot</path>;
+Once you have an image, copy the image into <path>/tftpboot</path>:
</p>
<pre caption="Copying the image">
-# <i>cp gentoo-sparc64-1.4_rc4-20040102.tftpboot /tftpboot</i>
+# <i>cp gentoo-sparc64-20100128.tftpboot /tftpboot</i>
+# <i>chmod 644 /tftpboot/gentoo-sparc64-20100128.tftpboot</i>
</pre>
<p>
-Now, when the netboot client makes a tftp request, it looks for a file that is
+Now, when the netboot client makes a TFTP request, it looks for a file that is
the hexadecimal number of its current IP address, and on some platforms an
<path>.ARCH</path> suffix. The hexadecimal number should use <e>capital</e>
characters.
@@ -478,7 +497,7 @@
</p>
<pre caption="Convert to hexadecimal">
-# <i>printf "%.2x%.2x%.2x%.2x\n" 10 0 1 15</i>
+# <i>printf "%.2X%.2X%.2X%.2X\n" 10 0 1 15</i>
</pre>
<pre caption="Example IP address">
@@ -487,33 +506,29 @@
</pre>
<p>
-So for the example sparc64 netboot client, it would look for a file named
-0A00010F when it tftpboots.
+So for the example netboot client, it would look for a file named
+<path>0A00010F</path> when it tftpboots.
</p>
<p>
-On sparc however, the file would be 0A00010F.SUN4M, 0A00010F.SUN4C or
-0A00010F.SUN4D depending on what type of sparc system.
+Iif you are really, really lazy (like me), you can netboot the host to get the
+filename the client is looking for from the netboot server logs.
</p>
<p>
-Additionally, if you are really really lazy (like me), you can netboot the host
-to get the filename the client is looking for from the netboot server logs.
-</p>
-
-<p>
-Make sure that both the rarpd and tftpd daemon you've chosen are currently
-running, then boot the host as described below in "Netbooting the client".
+Make sure that both the <c>rarpd</c> and TFTP daemon you've chosen are currently
+running, then boot the host as described below in <uri
+link="#netbootingclient">Netbooting the client</uri>.
</p>
<p>
The client will appear to hang after the boot net command is issued. Then on
-the netboot server, check the system logs for an entry for in.tftpd.
+the netboot server, check the system logs for an entry for <c>in.tftpd</c>.
</p>
<p>
-An example entry from a netboot server running sysklogd and tftp-hpa looks
-like;
+An example entry from a netboot server running <c>sysklogd</c> and
+<c>tftp-hpa</c> looks like:
</p>
<pre caption="Log entry for netboot server">
@@ -522,19 +537,19 @@
<p>
The filename is shown above after "filename" in the log entry, which in this
-case is 0A00010F.
+case is <path>0A00010F</path>.
</p>
<p>
As a way to keep track of what netboot image you are using, and to allow
multiple machines to use the same netboot image, you can use a soft link to
create the file with the hexadecimal value. To create this using our sample
-sparc64 host and the <path>gentoo-sparc64-1.4_rc4-20040102.tftpboot</path>, use
-the following command;
+sparc64 host and the <path>gentoo-sparc64-20100128.tftpboot</path>, use
+the following command:
</p>
<pre caption="Linking the image files">
-# <i>/bin/ln -s /tftpboot/gentoo-sparc64-1.4_rc4-20040102.tftpboot \
+# <i>/bin/ln -s /tftpboot/gentoo-sparc64-20100128.tftpboot \
/tftpboot/0A00010F</i>
</pre>
@@ -546,9 +561,8 @@
</section>
</chapter>
-<chapter>
+<chapter id="netbootingclient">
<title>Netbooting the client</title>
-
<section>
<body>
@@ -598,12 +612,12 @@
</p>
<p>
-If the netboot server is a Gentoo/LINUX system and experiences problems
-installing the rarpd and tftpd packages, please search
-<uri>http://forums.gentoo.org</uri> and <uri>http://bugs.gentoo.org</uri> to
-see if this problem has been encountered by anyone else. If it has not, or the
-solutions found do not work, then please open a new bug at
-<uri>http://bugs.gentoo.org</uri>
+If the netboot server is a Gentoo Linux system and experiences problems after
+installing the rarpd and tftpd packages, please search the <uri
+link="http://forums.gentoo.org">Gentoo Forums</uri> and <uri
+link="http://bugs.gentoo.org">Gentoo Bugzilla</uri> to see if this problem has
+been encountered by anyone else. If it has not, or the solutions found do not
+work, then please open a new bug.
</p>
<p>
@@ -613,7 +627,7 @@
<p>
This is presumably because the file your system is trying to load from the
tftpboot server is not available. On a SPARC system, you would probably see the
-following;
+following:
</p>
<pre caption="Booting appears to hang">
@@ -675,7 +689,7 @@
<p>
To change the value of tpe-link-test? from an OBP prompt, issue the following
-command;
+command:
</p>
<pre caption="Changing tpe-link-test value">
^ permalink raw reply [flat|nested] 3+ messages in thread
* [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoo-sparc-netboot-howto.xml
@ 2010-10-05 21:54 Joshua Saddler (nightmorph)
0 siblings, 0 replies; 3+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-10-05 21:54 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 10/10/05 21:54:55
Modified: gentoo-sparc-netboot-howto.xml
Log:
update package category moves, removals, etc. from an email sent to me
Revision Changes Path
1.13 xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml
file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml?rev=1.13&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml?rev=1.13&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml?r1=1.12&r2=1.13
Index: gentoo-sparc-netboot-howto.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml,v
retrieving revision 1.12
retrieving revision 1.13
diff -u -r1.12 -r1.13
--- gentoo-sparc-netboot-howto.xml 3 Mar 2010 01:37:41 -0000 1.12
+++ gentoo-sparc-netboot-howto.xml 5 Oct 2010 21:54:55 -0000 1.13
@@ -1,6 +1,6 @@
<?xml version='1.0' encoding="UTF-8"?>
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml,v 1.12 2010/03/03 01:37:41 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/gentoo-sparc-netboot-howto.xml,v 1.13 2010/10/05 21:54:55 nightmorph Exp $ -->
<guide>
<title>Gentoo Linux based Netboot HOWTO</title>
@@ -21,8 +21,8 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.4</version>
-<date>2010-03-02</date>
+<version>2</version>
+<date>2010-10-05</date>
<chapter>
<title>Introduction</title>
@@ -79,24 +79,18 @@
<body>
<p>
-Currently, there are two choices for a reverse ARP daemon. They are
-<c>net-misc/iputils</c> (installed as part of the system profile) and
-<c>net-misc/rarpd</c>.
+A reverse ARP daemon is already installed on your system; it's part of the
+<c>net-misc/iputils</c> package
</p>
-<note>
-Installing <c>net-misc/rarpd</c> will overwrite the <c>rarpd</c> and
-<c>rarpd</c> manpage from <c>net-misc/iputils</c>.
-</note>
-
<p>
<b>Setting up common rarpd elements</b>: <path>/etc/ethers</path>
</p>
<p>
-No matter which <c>rarpd</c> you choose to use, you will need to setup the
-<path>/etc/ethers</path> file. This file indicates which hosts <c>rarpd</c>
-should respond to when a request is seen, and what address to reply with.
+You will need to setup the <path>/etc/ethers</path> file. This file indicates
+which hosts <c>rarpd</c> should respond to when a request is seen, and what
+address to reply with.
</p>
<p>
@@ -164,16 +158,15 @@
</note>
<p>
-<b>Setting up net-misc/iputils rarpd</b>
+<b>Setting up rarpd</b>
</p>
<p>
First, we will need to determine the options to use for <c>rarpd</c>. While
there are more options than we'll cover here, these options should get you
-started As there is currently no <path>init.d</path> script for the
-<c>net-misc/iputils</c> version of <c>rarpd</c>, an entry will need to be added
-to <path>/etc/conf.d/local.start</path> if you want to enable <c>rarpd</c>
-services at boot time. A sample entry is as follows:
+started As there is currently no <path>init.d</path> script for <c>rarpd</c>, an
+entry will need to be added to <path>/etc/conf.d/local.start</path> if you want
+to enable <c>rarpd</c> services at boot time. A sample entry is as follows:
</p>
<pre caption="/etc/conf.d/local.start">
@@ -198,47 +191,6 @@
For more options, consult <c>man 8 rarpd</c>.
</p>
-<p>
-<b>Setting up net-misc/rarpd</b>
-</p>
-
-<p>
-Firstly, we'll need to install <c>rarpd</c> with the following command:
-</p>
-
-<pre caption="Installing rarpd">
-# <i>emerge net-misc/rarpd</i>
-</pre>
-
-<p>
-Next, options for <c>rarpd</c> will need to be set in
-<path>/etc/conf.d/rarpd</path>. For an equivalent configuration as the one used
-above for the <c>net-misc/iputils</c> <c>rarpd</c>, adjust
-<path>/etc/conf.d/rarpd</path> to look like the following
-</p>
-
-<pre caption="/etc/conf.d/rarpd">
-RARPD_OPTS="-v -i eth0"
-</pre>
-
-<p>
-An explanation of the above rarpd options (as taken from the man page);
-</p>
-
-<ul>
- <li>
- <c>-v</c> Be verbose. Show requests which the daemon is responding to
- </li>
- <li>
- <c>-i</c> Bind to the named interface. By default <c>rarpd</c> binds to the
- default interface for the local system type, if available
- </li>
-</ul>
-
-<p>
-For more options, consult <c>man 8 rarpd</c> and <c>rarpd --help</c>.
-</p>
-
</body>
</section>
<section>
@@ -246,8 +198,8 @@
<body>
<p>
-Here there are three options for a TFTP daemon, <c>net-misc/atftp</c>,
-<c>net-misc/netkit-tftp</c> and <c>net-misc/tftp-hpa</c>. You only need to
+Here there are three options for a TFTP daemon, <c>net-ftp/atftp</c>,
+<c>net-ftp/netkit-tftp</c> and <c>net-ftp/tftp-hpa</c>. You only need to
install one of the TFTP daemons for proper operation.
</p>
@@ -289,15 +241,15 @@
<body>
<p>
-First, install the <c>net-misc/atftp</c> package as follows;
+First, install the <c>atftp</c> package as follows;
</p>
<pre caption="Installing atftp">
-# <i>emerge net-misc/atftp</i>
+# <i>emerge atftp</i>
</pre>
<p>
-After the <c>net-misc/atftp</c> package has been installed, it will need to be
+After the <c>atftp</c> package has been installed, it will need to be
configured. If tftpd services are desired at boot time, an entry to
<path>/etc/conf.d/local.start</path> will need to be added as <c>atftp</c> has
no <path>init.d</path>, <c>inetd</c> or <c>xinetd</c> scripts of its own. If you
@@ -315,7 +267,7 @@
</pre>
<p>
-An explanation of the above <c>rarpd</c> options (as taken from the man page);
+An explanation of the above options (as taken from the man page);
</p>
<ul>
@@ -341,16 +293,16 @@
<body>
<p>
-First, install the <c>net-misc/netkit-tftp</c> package:
+First, install the <c>netkit-tftp</c> package:
</p>
<pre caption="Installing netkit-tftp">
-# <i>emerge net-misc/netkit-tftp</i>
+# <i>emerge netkit-tftp</i>
</pre>
<p>
Second, install <c>sys-apps/xinetd</c> if it is not currently present. After
-the <c>net-misc/netkit-tftp</c> and <c>sys-apps/xinetd</c> packages have been
+the <c>netkit-tftp</c> and <c>sys-apps/xinetd</c> packages have been
installed, <c>netkit-tftp</c> will need to be configured. <c>netkit-tftp</c>
needs to be run from <c>xinetd</c>, however it does not provide example scripts
of its own. A sample <c>xinetd</c> file is provided below:
@@ -432,7 +384,7 @@
</p>
<pre caption="Installing tftp-hpa">
-# <i>emerge net-misc/tftp-hpa</i>
+# <i>emerge tftp-hpa</i>
</pre>
<p>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-10-05 21:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-05 21:54 [gentoo-doc-cvs] gentoo commit in xml/htdocs/doc/en: gentoo-sparc-netboot-howto.xml Joshua Saddler (nightmorph)
-- strict thread matches above, loose matches on Subject: below --
2010-03-03 1:37 Joshua Saddler (nightmorph)
2009-12-14 21:35 Joshua Saddler (nightmorph)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox