* [gentoo-doc-cvs] cvs commit: vdr-guide.xml
@ 2006-09-29 10:40 Josh Saddler
0 siblings, 0 replies; 9+ messages in thread
From: Josh Saddler @ 2006-09-29 10:40 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 06/09/29 10:40:26
Modified: vdr-guide.xml
Log:
fixed VDR guide link for bug 149497
Revision Changes Path
1.2 xml/htdocs/doc/en/vdr-guide.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.2&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.2&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?r1=1.1&r2=1.2
Index: vdr-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- vdr-guide.xml 2 Sep 2006 10:04:16 -0000 1.1
+++ vdr-guide.xml 29 Sep 2006 10:40:25 -0000 1.2
@@ -1,8 +1,8 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.1 2006/09/02 10:04:16 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.2 2006/09/29 10:40:25 nightmorph Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<guide link="/doc/en/vdr.xml">
+<guide link="/doc/en/vdr-guide.xml">
<title>Gentoo Linux VDR Guide</title>
<author title="Author">
@@ -23,8 +23,8 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.0</version>
-<date>2006-09-02</date>
+<version>1.1</version>
+<date>2006-09-29</date>
<chapter>
<title>General information to DVB</title>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* [gentoo-doc-cvs] cvs commit: vdr-guide.xml
@ 2006-11-09 9:40 Xavier Neys
0 siblings, 0 replies; 9+ messages in thread
From: Xavier Neys @ 2006-11-09 9:40 UTC (permalink / raw
To: gentoo-doc-cvs
neysx 06/11/09 09:40:40
Modified: vdr-guide.xml
Log:
s:diox@swords.be:diox@gentoo.org:
Revision Changes Path
1.3 xml/htdocs/doc/en/vdr-guide.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.3&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.3&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?r1=1.2&r2=1.3
Index: vdr-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- vdr-guide.xml 29 Sep 2006 10:40:25 -0000 1.2
+++ vdr-guide.xml 9 Nov 2006 09:40:40 -0000 1.3
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.2 2006/09/29 10:40:25 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.3 2006/11/09 09:40:40 neysx Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide link="/doc/en/vdr-guide.xml">
@@ -9,7 +9,7 @@
<mail link="mail@ng-plasmon.de">Norman Golisz</mail>
</author>
<author title="Editor">
- <mail link="diox@swords.be">Dimitry Bradt</mail>
+ <mail link="diox@gentoo.org">Dimitry Bradt</mail>
</author>
<author title="Editor">
<mail link="nightmorph@gentoo.org">Joshua Saddler</mail>
@@ -23,7 +23,7 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.1</version>
+<version>1.2</version>
<date>2006-09-29</date>
<chapter>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* [gentoo-doc-cvs] cvs commit: vdr-guide.xml
@ 2006-11-16 4:53 Josh Saddler
0 siblings, 0 replies; 9+ messages in thread
From: Josh Saddler @ 2006-11-16 4:53 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 06/11/16 04:53:37
Modified: vdr-guide.xml
Log:
updated vdr guide for bug 155176, thanks to diox for the patch and zzam for technical review
Revision Changes Path
1.4 xml/htdocs/doc/en/vdr-guide.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.4&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.4&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?r1=1.3&r2=1.4
Index: vdr-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- vdr-guide.xml 9 Nov 2006 09:40:40 -0000 1.3
+++ vdr-guide.xml 16 Nov 2006 04:53:37 -0000 1.4
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.3 2006/11/09 09:40:40 neysx Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.4 2006/11/16 04:53:37 nightmorph Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide link="/doc/en/vdr-guide.xml">
@@ -8,7 +8,7 @@
<author title="Author">
<mail link="mail@ng-plasmon.de">Norman Golisz</mail>
</author>
-<author title="Editor">
+<author title="Author">
<mail link="diox@gentoo.org">Dimitry Bradt</mail>
</author>
<author title="Editor">
@@ -23,8 +23,8 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.2</version>
-<date>2006-09-29</date>
+<version>1.3</version>
+<date>2006-11-15</date>
<chapter>
<title>General information to DVB</title>
@@ -279,6 +279,19 @@
IR_CTRL="lirc"
</pre>
+<note>
+There's a remote configuration file available at Matthias Schwarzott's <uri
+link="http://dev.gentoo.org/~zzam/remote.conf">devspace</uri>. You will need to
+run <c>chown vdr:vdr</c> on the file to get it working.
+</note>
+
+<p>
+You'll probably want to configure your channels at this point. The VDR project
+provides you with some examples which can be found at
+<path>/usr/share/doc/vdr-analogtv-$version/examples/</path>, as long as you've
+installed >=<c>media-plugins/vdr-analogtv-1.0.00-r1</c>.
+</p>
+
<p>
Next, start VDR and add it to the default runlevel:
</p>
@@ -299,7 +312,6 @@
</body>
</section>
-
<section id="softdevice">
<title>Optional: Installing a softdevice plugin</title>
<body>
@@ -319,15 +331,80 @@
<path>/etc/conf.d/vdr.softdevice</path>.
</p>
+</body>
+</section>
+<section id="vdr-xineliboutput">
+<title>Optional: Alternate installation of a softdevice plugin</title>
+<body>
-<note>
-Another softdevice available in Portage is <c>vdr-xineliboutput</c>.
-</note>
+<p>
+Some people prefer to use <c>vdr-xineliboutput</c>, because it can also work
+remotely. We'll now teach you how to configure <c>vdr-xineliboutput</c> on your
+host and client. First, the host setup:
+</p>
+
+<pre caption="Installing vdr-xineliboutput">
+# <i>emerge vdr-xineliboutput</i>
+# <i>emerge --config vdr-xineliboutput</i>
+</pre>
<p>
-That's it, you're done! Have fun with your new video streaming capabilities.
+Adding command line options at this point is crucial for your softdevice to
+work. For more options, see <c>vdr --help</c>.
</p>
+<pre caption="Adding command line options to /etc/conf.d/vdr.xineliboutput">
+_EXTRAOPTS="--local=none --remote=37890"
+</pre>
+
+<p>
+The next step is to edit <path>/etc/vdr/svdrphosts.conf</path>. This file
+describes a number of host addresses that are allowed to connect to the SVDRP
+port of the video disk recorder running on the host system.
+</p>
+
+<pre caption="Editing /etc/vdr/svdrphosts.conf">
+<comment>(The proper syntax is: IP-Address[/Netmask])</comment>
+127.0.0.1 <comment>(always accept localhost)</comment>
+192.168.1.0/24 <comment>(any host on the local net)</comment>
+#204.152.189.113 <comment>(a specific host)</comment>
+#0.0.0.0/0 <comment>(any host on any net (USE THIS WITH CARE!))</comment>
+</pre>
+
+<p>
+You must restart VDR for the changes to take effect:
+</p>
+
+<pre caption="Restarting VDR">
+# <i>/etc/init.d/vdr restart</i>
+* Stopping vdr ... [ ok ]
+* Preparing start of vdr:
+* config files ... [ ok ]
+* Waiting for prerequisites (devices nodes etc.) ... [ ok ]
+* Starting vdr ... [ ok ]
+* Waiting for working vdr ... [ ok ]
+</pre>
+
+<p>
+Now, simply <c>emerge media-plugins/vdr-xineliboutput</c> on your client, and
+start it.
+</p>
+
+<pre caption="Client setup">
+# <i>emerge vdr-xineliboutput</i>
+$ <i>vdr-sxfe xvdr://hostname</i>
+</pre>
+
+<p>
+Sit back and enjoy your new video streaming capabilities. :)
+</p>
+
+<note>
+If you need any help, you can always ask someone in <uri
+link="irc://irc.freenode.org/gentoo-vdr">#gentoo-vdr</uri>, or look around on
+our <uri link="http://forums.gentoo.org/">forums</uri>.
+</note>
+
</body>
</section>
</chapter>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* [gentoo-doc-cvs] cvs commit: vdr-guide.xml
@ 2007-01-03 0:58 Josh Saddler
0 siblings, 0 replies; 9+ messages in thread
From: Josh Saddler @ 2007-01-03 0:58 UTC (permalink / raw
To: gentoo-doc-cvs
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 18556 bytes --]
nightmorph 07/01/03 00:58:38
Modified: vdr-guide.xml
Log:
new additions to the VDR guide from bug 159142 have been given a thorough overhaul; lots of new stuff for VDR/DVB users
Revision Changes Path
1.5 xml/htdocs/doc/en/vdr-guide.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.5&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.5&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?r1=1.4&r2=1.5
Index: vdr-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -r1.4 -r1.5
--- vdr-guide.xml 16 Nov 2006 04:53:37 -0000 1.4
+++ vdr-guide.xml 3 Jan 2007 00:58:38 -0000 1.5
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.4 2006/11/16 04:53:37 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.5 2007/01/03 00:58:38 nightmorph Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide link="/doc/en/vdr-guide.xml">
@@ -11,6 +11,9 @@
<author title="Author">
<mail link="diox@gentoo.org">Dimitry Bradt</mail>
</author>
+<author title="Author">
+ <mail link="zzam@gentoo.org">Matthias Schwarzott</mail>
+</author>
<author title="Editor">
<mail link="nightmorph@gentoo.org">Joshua Saddler</mail>
</author>
@@ -23,8 +26,8 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.3</version>
-<date>2006-11-15</date>
+<version>1.4</version>
+<date>2007-01-02</date>
<chapter>
<title>General information to DVB</title>
@@ -88,7 +91,7 @@
<body>
<p>
-First, we must ensure that your kernel supports DVB and your DVB device. Since
+First, we must ensure that your kernel supports DVB and your DVB device. Since
kernel version 2.6 the necessary drivers are included. Check your kernel
configuration and make sure the following options are selected as a static
driver or as modules.
@@ -150,11 +153,11 @@
<body>
<p>
-It's recommended to mark every driver as module, so you are able to add the
+It's recommended to mark every driver as module, so that you can to add the
required module dynamically, especially if you don't know the module name. If
-you know the module name already, select the driver as built-in driver. Compile
-the kernel, install the modules and boot it. Check to see if your kernel has
-successfully detected your card by using <c>dmesg</c>.
+you know the module name already, select the driver as a built-in driver.
+Compile the kernel, install the modules and boot it. Check to see if your kernel
+has successfully detected your card by using <c>dmesg</c>.
</p>
<pre caption="Checking kernel output">
@@ -164,29 +167,83 @@
input: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver remote control as /class/input/input2
</pre>
+</body>
+</section>
+</chapter>
+
+<chapter id="inst_vdr">
+<title>Installing VDR</title>
+<section>
+<body>
+
+<p>
+To install VDR, we just emerge it.
+</p>
+
+<pre caption="Installing VDR">
+# <i>emerge vdr</i>
+</pre>
+
<p>
-Now continue with <uri link="#inst_lirc">installing LIRC</uri> if you want to
-use a remote control.
+Now continue with <uri link="#inst_ir_remote">Installing the Remote Control</uri>.
</p>
</body>
</section>
</chapter>
-<chapter id="inst_lirc">
-<title>Configuring the remote control - LIRC</title>
+<chapter id="inst_ir_remote">
+<title>Installing the Remote Control</title>
+<section>
+<body>
+
+<p>
+There are at least two ways to control VDR via an infrared remote control. If
+your TV card has an onboard IR receiver you can use <c>vdr-remote</c>.
+Otherwise, you most likely need to use LIRC.
+</p>
+
+</body>
+</section>
+<section>
+<title>Installing vdr-remote</title>
+<body>
+
+<p>
+We first install the plugin via emerge:
+</p>
+
+<pre caption="Installing vdr-remote">
+# <i>emerge vdr-remote</i>
+# <i>emerge --config vdr-remote</i>
+</pre>
+
+<p>
+When using the remote plugin for the IR port on your DVB card everything should
+be fine with the default config. It automatically uses the input device which
+has "dvb" in its name. For more advanced uses take a look at
+<path>/etc/conf.d/vdr.remote</path>.
+</p>
+
+<p>
+Now, continue with <uri link="#video-out">Video Output Methods</uri>.
+</p>
+
+</body>
+</section>
<section>
-<title>Installing LIRC</title>
+<title>Alternative: installing LIRC</title>
<body>
<p>
-If your card can be remotely controlled, you may wish to configure LIRC. LIRC
-interprets the pressed keys and returns a name for each one. A program that
-supports LIRC waits for key events and runs the action configured in the config
-file, mostly stored in the config directory of the executing program (e.g.
-<c>mplayer</c> loads the file <path>~/.mplayer/lircrc</path>). Before we
-install LIRC, you have to add <c>lirc</c> to your USE flags and add an
-additional entry to <path>/etc/make.conf</path>: <c>LIRC_DEVICES</c>. Use <uri
+If your card can be remotely controlled (but you cannot or do not want to use
+<c>vdr-remote</c>), you may wish to configure LIRC. LIRC interprets the pressed
+keys and returns a name for each one. A program that supports LIRC waits for key
+events and runs the action configured in the config file, mostly stored in the
+config directory of the executing program (e.g. <c>mplayer</c> loads the file
+<path>~/.mplayer/lircrc</path>). Before we install LIRC, you have to add
+<c>lirc</c> to your USE flags and add an additional entry to
+<path>/etc/make.conf</path>: <c>LIRC_DEVICES</c>. Use <uri
link="http://www.lirc.org/html/table.html">this list</uri> to find the proper
arguments for the option.
</p>
@@ -244,6 +301,21 @@
</pre>
<p>
+Now it should be possible to watch <c>lircd</c> running and decoding key-presses.
+Just run the command <c>irw</c>. Stop it with pressing Ctrl+C when you have
+enough.
+</p>
+
+<pre caption="Testing LIRC">
+# <i>irw</i>
+0000000000001aa2 00 Exit Technisat_TTS35AI.conf
+0000000000001a8d 00 Mute Technisat_TTS35AI.conf
+0000000000000a97 00 OK Technisat_TTS35AI.conf
+0000000000000a97 01 OK Technisat_TTS35AI.conf
+0000000000000a92 00 Menu Technisat_TTS35AI.conf
+</pre>
+
+<p>
Next, add it to the default runlevel so that it starts automatically at boot.
</p>
@@ -251,74 +323,104 @@
# <i>rc-update add lircd default</i>
</pre>
+<p>
+To be able to use your remote control, you must enable LIRC support in VDR. Add
+the following line to <path>/etc/conf.d/vdr</path>:
+</p>
+
+<pre caption="Enabling support for LIRC">
+# <i>nano -w /etc/conf.d/vdr</i>
+IR_CTRL="lirc"
+</pre>
+
</body>
</section>
</chapter>
-<chapter>
-<title>Setting up VDR</title>
+<chapter id="video-out">
+<title>Video Output Methods</title>
<section>
-<title>Installing VDR</title>
<body>
<p>
-To install VDR, we just emerge it.
+You now need to decide on one (and only one!) of the following video output
+devices which show the picture and the overlayed On Screen Display (OSD).
</p>
-<pre caption="Installing VDR">
-# <i>emerge vdr</i>
-</pre>
+</body>
+</section>
+<section id="vdr-dxr3">
+<title>Hardware decoding: full-featured DVB cards</title>
+<body>
<p>
-If you want to be able to use your remote control, we have to enable LIRC
-support in VDR. Add the following line to the <path>/etc/conf.d/vdr</path>:
+Users of these expensive cards need not install anything else, so you may
+continue with <uri link="#channel_list">configuring your channel list</uri>.
</p>
-<pre caption="Enabling support for LIRC">
-# <i>nano -w /etc/conf.d/vdr</i>
-IR_CTRL="lirc"
+</body>
+</section>
+<section id="vdr-dxr3">
+<title>Hardware decoding: DXR3/Hollywood+ cards</title>
+<body>
+
+<p>
+To use a DXR3 card for VDR output we need the <c>vdr-dxr3</c> plugin.
+</p>
+
+<pre caption="Installing the plugin">
+# <i>emerge vdr-dxr3</i>
+# <i>echo em8300 >> /etc/modules.autoload.d/kernel-2.6</i>
</pre>
-<note>
-There's a remote configuration file available at Matthias Schwarzott's <uri
-link="http://dev.gentoo.org/~zzam/remote.conf">devspace</uri>. You will need to
-run <c>chown vdr:vdr</c> on the file to get it working.
-</note>
+<p>
+em8300-modules needs some configuration that depends on the exact used
+revision of the card.
+</p>
+<!--
<p>
-You'll probably want to configure your channels at this point. The VDR project
-provides you with some examples which can be found at
-<path>/usr/share/doc/vdr-analogtv-$version/examples/</path>, as long as you've
-installed >=<c>media-plugins/vdr-analogtv-1.0.00-r1</c>.
+Because we (the authors) don't own a card that uses the dxr3config, we decided
+to skip this part till we have one at our disposal.
</p>
+-->
<p>
-Next, start VDR and add it to the default runlevel:
+Continue with <uri link="#channel_list">configuring your channel list</uri>.
</p>
-<pre caption="Adding vdr to the default runlevel">
-# <i>/etc/init.d/vdr start</i>
-# <i>rc-update add vdr default</i>
+</body>
+</section>
+<section id="vdr-pvr350">
+<title>Hardware decoding: PVR350 cards</title>
+<body>
+
+<p>
+As PVR350 cards have an onboard MPEG-Decoder chip we want to make use of that.
+We need to install the <c>vdr-pvr350</c> plugin. If <c>ivtv-driver</c> is not
+yet installed emerge will automatically install it for you. To have the ivtv
+module loaded at boot we add it to
+<path>/etc/modules.autoload.d/kernel-2.6</path>:
+</p>
+
+<pre caption="Installing PVR350-Plugin">
+# <i>emerge vdr-pvr350</i>
+# <i>echo ivtv >> /etc/modules.autoload.d/kernel-2.6</i>
</pre>
<p>
-Now that the basic installation is over, you need to configure VDR. Switch to
-your output screen and follow the on-screen instructions. VDR asks you to press
-various keys on your remote control to learn the correct key codes. In case you
-don't own a remote control unit, you can use your keyboard. If you only have a
-budget card, you need to install a software output plugin, or <e>softdevice
-plugin</e>. This decodes the stream and offers a device to access.
+Continue with <uri link="#channel_list">configuring your channel list</uri>.
</p>
</body>
</section>
-<section id="softdevice">
-<title>Optional: Installing a softdevice plugin</title>
+<section id="vdr-xineliboutput">
+<title>Software decoding: vdr-softdevice</title>
<body>
<p>
-To install a softdevice, we have to emerge <c>vdr-softdevice</c>. Don't forget
-to configure the plugin.
+To install it, we have to emerge <c>vdr-softdevice</c>. Don't forget
+to enable the plugin.
</p>
<pre caption="Installing the softdevice plugin">
@@ -331,10 +433,29 @@
<path>/etc/conf.d/vdr.softdevice</path>.
</p>
+<p>
+For now, we will only describe the shm ("shared memory") method. This is already
+enabled in the installed config file (Setting SOFTDEVICE_VIDEO_OUT). Later you
+need to start <c>ShmClient</c> to get a window showing the picture.
+</p>
+
+<note>
+If you do not want to think about a separate keyboard layout for controlling VDR
+with softdevice/shm there is a remote configuration file available at Matthias
+Schwarzott's <uri
+link="http://dev.gentoo.org/~zzam/remote.softdevice-shm.conf">devspace</uri>.
+You will need to copy it to <path>/etc/vdr/remote.conf</path> and run <c>chown
+vdr:vdr</c> on the file to get it working.
+</note>
+
+<p>
+Continue with <uri link="#channel_list">configuring your channel list</uri>.
+</p>
+
</body>
</section>
<section id="vdr-xineliboutput">
-<title>Optional: Alternate installation of a softdevice plugin</title>
+<title>Software decoding: vdr-xineliboutput</title>
<body>
<p>
@@ -349,8 +470,8 @@
</pre>
<p>
-Adding command line options at this point is crucial for your softdevice to
-work. For more options, see <c>vdr --help</c>.
+Adding command line options at this point is crucial for xineliboutput to work.
+For more options, see <c>vdr --help</c>.
</p>
<pre caption="Adding command line options to /etc/conf.d/vdr.xineliboutput">
@@ -368,37 +489,212 @@
127.0.0.1 <comment>(always accept localhost)</comment>
192.168.1.0/24 <comment>(any host on the local net)</comment>
#204.152.189.113 <comment>(a specific host)</comment>
-#0.0.0.0/0 <comment>(any host on any net (USE THIS WITH CARE!))</comment>
+#0.0.0.0/0 <comment>(any host on any net - USE THIS WITH CARE!)</comment>
</pre>
<p>
-You must restart VDR for the changes to take effect:
+If you only want to use <c>vdr-xineliboutput</c> to view the picture
+on the same PC running VDR you can now
+<uri link="#channel_list">continue with configuring your channel-list</uri>.
</p>
-<pre caption="Restarting VDR">
-# <i>/etc/init.d/vdr restart</i>
-* Stopping vdr ... [ ok ]
+<p>
+Otherwise, you now simply <c>emerge media-plugins/vdr-xineliboutput</c> on your
+client:
+</p>
+
+<pre caption="Client setup">
+# <i>emerge vdr-xineliboutput</i>
+</pre>
+
+<p>
+Later (after having started VDR) you will use the command <c>vdr-sxfe
+xvdr://hostname</c> to connect to VDR and view its picture and OSD.
+</p>
+
+<p>
+Continue with <uri link="#channel_list">configuring your channel list</uri>.
+</p>
+
+<note>
+There is also a plugin which just simulates the existance of a real
+output device (<c>vdr-dummydevice</c>) for some fancy uses like record-only
+servers, but that is more advanced than a normal VDR setup.
+</note>
+
+</body>
+</section>
+</chapter>
+
+<chapter id="channel_list">
+<title>Creating a Channel List</title>
+<section>
+<body>
+
+<p>
+To make VDR really useful you need to create an appropriate channel list.
+</p>
+
+<p>
+There is more than one way to get a working list of channels (besides
+downloading one). The channel list installed by default is for DVB-S reception
+on Astra on 19.2°E.
+</p>
+
+</body>
+</section>
+<section>
+<title>Using dvbscan from linuxtv-dvb-apps</title>
+<body>
+
+<pre caption="Installing linuxtv-dvb-apps">
+# <i>emerge linuxtv-dvb-apps</i>
+</pre>
+
+<p>
+Find the correct frequency list for your region and type of reception. These
+files are stored under <path>/usr/share/dvb/scan</path>. For reception with
+DVB-T in Germany, Region Nuernberg you need to use
+<path>/usr/share/dvb/scan/dvb-t/de-Nuernberg</path>.
+</p>
+
+<pre caption="Scanning with dvbscan">
+$ <i>dvbscan -o vdr /usr/share/dvb/scan/dvb-t/de-Nuernberg > /etc/vdr/channels.conf</i>
+</pre>
+
+</body>
+</section>
+<section>
+<title>Using vdr-reelchannelscan</title>
+<body>
+
+<p>
+First, delete the contents of the existing channel list.
+</p>
+
+<pre caption="Cleaning old channel-list">
+# <i>rm /etc/vdr/channels.conf</i>
+</pre>
+
+<pre caption="Installing and activating vdr-reelchannelscan">
+# <i>emerge vdr-reelchannelscan</i>
+# <i>emerge --config vdr-reelchannelscan</i>
+</pre>
+
+</body>
+</section>
+<section>
+<title>Channels for systems using vdr-analogtv</title>
+<body>
+
+<p>
+You'll probably want to configure your channels at this point. The VDR project
+provides you with some examples which can be found at
+<path>/usr/share/doc/vdr-analogtv-$version/examples/</path>, as long as you've
+installed >=<c>media-plugins/vdr-analogtv-1.0.00-r1</c>.
+</p>
+
+</body>
+</section>
+</chapter>
+
+<chapter>
+<title>Starting VDR</title>
+<section>
+<body>
+
+<p>
+After having all basic software parts ready on the system you need to
+configure VDR with its OSD.
+</p>
+
+<p>
+If you use a hardware decoder for picture output you should switch on the
+connected TV now. If you use software output the client for this must be started
+after VDR.
+</p>
+
+<p>
+First, you should learn your key definitions; that is, connecting keys on your
+remote control to VDR's internal commands.
+</p>
+
+<note>
+Just in case you need to edit the keyboard configuration, or (more likely) want
+to delete it to go back to learning the keys: VDR stores its key-definitions in
+<path>/etc/vdr/remote.conf</path>.
+</note>
+
+<p>
+We begin with starting VDR:
+</p>
+
+<pre caption="Starting VDR">
+# <i>/etc/init.d/vdr start</i>
* Preparing start of vdr:
* config files ... [ ok ]
* Waiting for prerequisites (devices nodes etc.) ... [ ok ]
* Starting vdr ... [ ok ]
-* Waiting for working vdr ... [ ok ]
+* First start of vdr: No check for running vdr possible
+* until control device (remote/keyboard) keys are learnt!
+</pre>
+
+<note>
+Users of software decoders should now start the client program that opens the
+window to show the TV picture and the OSD.
+</note>
+
+<pre caption="Activating the software decoder for the client">
+<comment>(For users of vdr-softdevice)</comment>
+# <i>ShmClient</i>
+<comment>(For users of vdr-xineliboutput)</comment>
+# <i>vdr-sxfe xvdr://hostname</i>
</pre>
<p>
-Now, simply <c>emerge media-plugins/vdr-xineliboutput</c> on your client, and
-start it.
+The most useful keys for VDR are:
</p>
+<ul>
+ <li>Cursor keys (Left/Right/Up/Down)</li>
+ <li>Menu/Exit/Ok</li>
+ <li>Colors (Red/Green/Yellow/Blue)</li>
+ <li>Number keys (0-9)</li>
+</ul>
-<pre caption="Client setup">
-# <i>emerge vdr-xineliboutput</i>
-$ <i>vdr-sxfe xvdr://hostname</i>
-</pre>
+<impo>
+If you don't have many keys, make sure to assign these. (Some remotes have
+Play/Pause/etc. on the same keys as the colors, so use them for the colors).
+</impo>
<p>
-Sit back and enjoy your new video streaming capabilities. :)
+Now that the basic installation is over, you need to configure VDR. Switch to
+your output screen and follow the on-screen instructions. VDR asks you to press
+various keys on your remote control to learn the correct key codes. If you don't
+own a remote control, you can use your keyboard.
</p>
+<!--<p>
+TODO: Add a configuration howto for remote controls etc.
+</p>-->
+
+<p>
+Now you can add the VDR initscript to the default runlevel to get it started
+every time your computer boots up.
+</p>
+
+<pre caption="Adding vdr to the default runlevel">
+# <i>rc-update add vdr default</i>
+</pre>
+
+</body>
+</section>
+</chapter>
+
+<chapter>
+<title>Troubleshooting</title>
+<section>
+<body>
+
<note>
If you need any help, you can always ask someone in <uri
link="irc://irc.freenode.org/gentoo-vdr">#gentoo-vdr</uri>, or look around on
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* [gentoo-doc-cvs] cvs commit: vdr-guide.xml
@ 2007-01-03 15:04 Josh Saddler
0 siblings, 0 replies; 9+ messages in thread
From: Josh Saddler @ 2007-01-03 15:04 UTC (permalink / raw
To: gentoo-doc-cvs
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3803 bytes --]
nightmorph 07/01/03 15:04:27
Modified: vdr-guide.xml
Log:
more grammar & sentence rephrasing stuff that i should have caught in the last update, purely englishification stuff, hence no revbump. thanks to diox for catching it and for the patch, bug 159142
Revision Changes Path
1.6 xml/htdocs/doc/en/vdr-guide.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.6&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.6&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?r1=1.5&r2=1.6
Index: vdr-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v
retrieving revision 1.5
retrieving revision 1.6
diff -u -r1.5 -r1.6
--- vdr-guide.xml 3 Jan 2007 00:58:38 -0000 1.5
+++ vdr-guide.xml 3 Jan 2007 15:04:27 -0000 1.6
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.5 2007/01/03 00:58:38 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.6 2007/01/03 15:04:27 nightmorph Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide link="/doc/en/vdr-guide.xml">
@@ -153,11 +153,11 @@
<body>
<p>
-It's recommended to mark every driver as module, so that you can to add the
+It's recommended to mark every driver as module, so that you can add the
required module dynamically, especially if you don't know the module name. If
-you know the module name already, select the driver as a built-in driver.
-Compile the kernel, install the modules and boot it. Check to see if your kernel
-has successfully detected your card by using <c>dmesg</c>.
+you already know the module name, select the driver as a built-in driver.
+Compile the kernel, install the modules and boot it. You can check if your
+kernel has successfully detected your card by using <c>dmesg</c>.
</p>
<pre caption="Checking kernel output">
@@ -301,9 +301,9 @@
</pre>
<p>
-Now it should be possible to watch <c>lircd</c> running and decoding key-presses.
-Just run the command <c>irw</c>. Stop it with pressing Ctrl+C when you have
-enough.
+Now it should be possible to watch <c>lircd</c> capturing and decoding key
+presses. Just run the command <c>irw</c>. Stop it by pressing Ctrl+C when you
+have enough.
</p>
<pre caption="Testing LIRC">
@@ -374,8 +374,8 @@
</pre>
<p>
-em8300-modules needs some configuration that depends on the exact used
-revision of the card.
+The em8300 module need some configuration that depends on the exact revision of
+that card.
</p>
<!--
@@ -493,9 +493,9 @@
</pre>
<p>
-If you only want to use <c>vdr-xineliboutput</c> to view the picture
-on the same PC running VDR you can now
-<uri link="#channel_list">continue with configuring your channel-list</uri>.
+If you only want to use <c>vdr-xineliboutput</c> to view the picture on the same
+computer as the one running VDR you can continue with <uri
+link="#channel_list">configuring your channel list</uri>.
</p>
<p>
@@ -532,13 +532,10 @@
<body>
<p>
-To make VDR really useful you need to create an appropriate channel list.
-</p>
-
-<p>
-There is more than one way to get a working list of channels (besides
-downloading one). The channel list installed by default is for DVB-S reception
-on Astra on 19.2°E.
+To make VDR really useful you need to create an appropriate channel list. There
+is more than one way to get a working list of channels (besides downloading
+one). The channel list installed by default is for DVB-S reception on Astra on
+19.2°E.
</p>
</body>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* [gentoo-doc-cvs] cvs commit: vdr-guide.xml
@ 2007-01-16 19:23 Josh Saddler
0 siblings, 0 replies; 9+ messages in thread
From: Josh Saddler @ 2007-01-16 19:23 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 07/01/16 19:23:42
Modified: vdr-guide.xml
Log:
updated email address, all translations, no revbump, bug 162401
Revision Changes Path
1.7 xml/htdocs/doc/en/vdr-guide.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.7&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.7&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?r1=1.6&r2=1.7
Index: vdr-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v
retrieving revision 1.6
retrieving revision 1.7
diff -u -r1.6 -r1.7
--- vdr-guide.xml 3 Jan 2007 15:04:27 -0000 1.6
+++ vdr-guide.xml 16 Jan 2007 19:23:42 -0000 1.7
@@ -1,12 +1,12 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.6 2007/01/03 15:04:27 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.7 2007/01/16 19:23:42 nightmorph Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide link="/doc/en/vdr-guide.xml">
<title>Gentoo Linux VDR Guide</title>
<author title="Author">
- <mail link="mail@ng-plasmon.de">Norman Golisz</mail>
+ <mail link="ng@zcat.de">Norman Golisz</mail>
</author>
<author title="Author">
<mail link="diox@gentoo.org">Dimitry Bradt</mail>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* [gentoo-doc-cvs] cvs commit: vdr-guide.xml
@ 2007-11-13 13:10 Xavier Neys
0 siblings, 0 replies; 9+ messages in thread
From: Xavier Neys @ 2007-11-13 13:10 UTC (permalink / raw
To: gentoo-doc-cvs
neysx 07/11/13 13:10:45
Modified: vdr-guide.xml
Log:
[13 13:09:57] <zzam> may someone commit this to vdr-guide.xml ? http://rafb.net/p/XyHuZQ32.html
Revision Changes Path
1.8 xml/htdocs/doc/en/vdr-guide.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.8&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.8&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?r1=1.7&r2=1.8
Index: vdr-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v
retrieving revision 1.7
retrieving revision 1.8
diff -u -r1.7 -r1.8
--- vdr-guide.xml 16 Jan 2007 19:23:42 -0000 1.7
+++ vdr-guide.xml 13 Nov 2007 13:10:45 -0000 1.8
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.7 2007/01/16 19:23:42 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.8 2007/11/13 13:10:45 neysx Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide link="/doc/en/vdr-guide.xml">
@@ -26,8 +26,8 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.4</version>
-<date>2007-01-02</date>
+<version>1.5</version>
+<date>2007-11-13</date>
<chapter>
<title>General information to DVB</title>
@@ -440,12 +440,12 @@
</p>
<note>
-If you do not want to think about a separate keyboard layout for controlling VDR
-with softdevice/shm there is a remote configuration file available at Matthias
-Schwarzott's <uri
-link="http://dev.gentoo.org/~zzam/remote.softdevice-shm.conf">devspace</uri>.
-You will need to copy it to <path>/etc/vdr/remote.conf</path> and run <c>chown
-vdr:vdr</c> on the file to get it working.
+If you do not want to think about a separate keyboard layout for controlling
+VDR, there are remote configuration files available at Matthias Schwarzott's
+<uri link="http://dev.gentoo.org/~zzam/vdr_remote_conf/">devspace</uri>. There
+are files for softdevice/shm and xineliboutput (more coming). You will need the
+relevant file to <path>/etc/vdr/remote.conf</path> and run <c>chown vdr:vdr</c>
+on the file to get it working.
</note>
<p>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* [gentoo-doc-cvs] cvs commit: vdr-guide.xml
@ 2008-03-20 17:31 Shyam Mani
0 siblings, 0 replies; 9+ messages in thread
From: Shyam Mani @ 2008-03-20 17:31 UTC (permalink / raw
To: gentoo-doc-cvs
fox2mike 08/03/20 17:31:27
Modified: vdr-guide.xml
Log:
Replacing emerge --config with equivalent eselect commands, thanks to Matthias Schwarzott <zzam@gentoo.org> for patch
Revision Changes Path
1.9 xml/htdocs/doc/en/vdr-guide.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.9&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.9&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?r1=1.8&r2=1.9
Index: vdr-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v
retrieving revision 1.8
retrieving revision 1.9
diff -u -r1.8 -r1.9
--- vdr-guide.xml 13 Nov 2007 13:10:45 -0000 1.8
+++ vdr-guide.xml 20 Mar 2008 17:31:27 -0000 1.9
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.8 2007/11/13 13:10:45 neysx Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.9 2008/03/20 17:31:27 fox2mike Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide link="/doc/en/vdr-guide.xml">
@@ -26,8 +26,8 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.5</version>
-<date>2007-11-13</date>
+<version>1.6</version>
+<date>2008-03-21</date>
<chapter>
<title>General information to DVB</title>
@@ -215,7 +215,7 @@
<pre caption="Installing vdr-remote">
# <i>emerge vdr-remote</i>
-# <i>emerge --config vdr-remote</i>
+# <i>eselect vdr-plugin enable remote</i>
</pre>
<p>
@@ -425,7 +425,7 @@
<pre caption="Installing the softdevice plugin">
# <i>emerge vdr-softdevice</i>
-# <i>emerge --config vdr-softdevice</i>
+# <i>eselect vdr-plugin enable softdevice</i>
</pre>
<p>
@@ -466,7 +466,7 @@
<pre caption="Installing vdr-xineliboutput">
# <i>emerge vdr-xineliboutput</i>
-# <i>emerge --config vdr-xineliboutput</i>
+# <i>eselect vdr-plugin enable xineliboutput</i>
</pre>
<p>
@@ -575,7 +575,7 @@
<pre caption="Installing and activating vdr-reelchannelscan">
# <i>emerge vdr-reelchannelscan</i>
-# <i>emerge --config vdr-reelchannelscan</i>
+# <i>eselect vdr-plugin enable reelchannelscan</i>
</pre>
</body>
--
gentoo-doc-cvs@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
* [gentoo-doc-cvs] cvs commit: vdr-guide.xml
@ 2008-06-12 21:21 Joshua Saddler
0 siblings, 0 replies; 9+ messages in thread
From: Joshua Saddler @ 2008-06-12 21:21 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 08/06/12 21:21:34
Modified: vdr-guide.xml
Log:
update config file for bug 226123
Revision Changes Path
1.10 xml/htdocs/doc/en/vdr-guide.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.10&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?rev=1.10&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/vdr-guide.xml?r1=1.9&r2=1.10
Index: vdr-guide.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v
retrieving revision 1.9
retrieving revision 1.10
diff -u -r1.9 -r1.10
--- vdr-guide.xml 20 Mar 2008 17:31:27 -0000 1.9
+++ vdr-guide.xml 12 Jun 2008 21:21:34 -0000 1.10
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.9 2008/03/20 17:31:27 fox2mike Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/vdr-guide.xml,v 1.10 2008/06/12 21:21:34 nightmorph Exp $ -->
<!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
<guide link="/doc/en/vdr-guide.xml">
@@ -26,8 +26,8 @@
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
<license/>
-<version>1.6</version>
-<date>2008-03-21</date>
+<version>1.7</version>
+<date>2008-06-12</date>
<chapter>
<title>General information to DVB</title>
@@ -284,7 +284,7 @@
<p>
<c>lircd</c> needs to know the device to use. Add the following line to
-<path>/etc/conf.d/lirc.conf</path>. Remember to replace <c>devinput</c> with
+<path>/etc/conf.d/lircd</path>. Remember to replace <c>devinput</c> with
the name of your driver and <c>event1</c> with the actual device.
</p>
--
gentoo-doc-cvs@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2008-06-12 21:21 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-09 9:40 [gentoo-doc-cvs] cvs commit: vdr-guide.xml Xavier Neys
-- strict thread matches above, loose matches on Subject: below --
2008-06-12 21:21 Joshua Saddler
2008-03-20 17:31 Shyam Mani
2007-11-13 13:10 Xavier Neys
2007-01-16 19:23 Josh Saddler
2007-01-03 15:04 Josh Saddler
2007-01-03 0:58 Josh Saddler
2006-11-16 4:53 Josh Saddler
2006-09-29 10:40 Josh Saddler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox