* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2006-08-17 2:00 Josh Saddler
0 siblings, 0 replies; 11+ messages in thread
From: Josh Saddler @ 2006-08-17 2:00 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 06/08/17 02:00:23
Modified: hb-install-alpha-disk.xml
Log:
removed dir_index instructions, since it's included in the default mke2fs.conf and overrides other good options. bug 101034
Revision Changes Path
1.2 xml/htdocs/doc/en/handbook/draft/2006.1/hb-install-alpha-disk.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/handbook/draft/2006.1/hb-install-alpha-disk.xml?rev=1.2&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/handbook/draft/2006.1/hb-install-alpha-disk.xml?rev=1.2&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/handbook/draft/2006.1/hb-install-alpha-disk.xml?r1=1.1&r2=1.2
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2006.1/hb-install-alpha-disk.xml,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- hb-install-alpha-disk.xml 9 Aug 2006 16:35:14 -0000 1.1
+++ hb-install-alpha-disk.xml 17 Aug 2006 02:00:23 -0000 1.2
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2006.1/hb-install-alpha-disk.xml,v 1.1 2006/08/09 16:35:14 fox2mike Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2006.1/hb-install-alpha-disk.xml,v 1.2 2006/08/17 02:00:23 nightmorph Exp $ -->
<sections>
<version>6.1</version>
-<date>2006-06-20</date>
+<date>2006-08-16</date>
<section>
<title>Introduction to Block Devices</title>
@@ -664,10 +664,7 @@
<b>ext3</b> is the journaled version of the ext2 filesystem, providing metadata
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
-filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. You can enable this indexing by
-adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
-excellent filesystem.
+filesystem.
</p>
<p>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread
* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2008-01-04 17:36 Xavier Neys
0 siblings, 0 replies; 11+ messages in thread
From: Xavier Neys @ 2008-01-04 17:36 UTC (permalink / raw
To: gentoo-doc-cvs
neysx 08/01/04 17:36:53
Modified: hb-install-alpha-disk.xml
Log:
Fixed partition number in <pre>, Tx to cla
Revision Changes Path
1.18 xml/htdocs/doc/en/handbook/draft/hb-install-alpha-disk.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/handbook/draft/hb-install-alpha-disk.xml?rev=1.18&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/handbook/draft/hb-install-alpha-disk.xml?rev=1.18&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/handbook/draft/hb-install-alpha-disk.xml?r1=1.17&r2=1.18
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/hb-install-alpha-disk.xml,v
retrieving revision 1.17
retrieving revision 1.18
diff -u -r1.17 -r1.18
--- hb-install-alpha-disk.xml 3 Nov 2007 23:40:06 -0000 1.17
+++ hb-install-alpha-disk.xml 4 Jan 2008 17:36:53 -0000 1.18
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/hb-install-alpha-disk.xml,v 1.17 2007/11/03 23:40:06 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/hb-install-alpha-disk.xml,v 1.18 2008/01/04 17:36:53 neysx Exp $ -->
<sections>
<version>9.0</version>
-<date>2007-06-26</date>
+<date>2008-01-04</date>
<section>
<title>Introduction to Block Devices</title>
@@ -539,7 +539,7 @@
Last cylinder or +size or +sizeM or +sizeK (17-8727, default 8727): <i>+1000M</i>
Command (m for help): <i>t</i>
-Partition number (1-4): <i>1</i>
+Partition number (1-4): <i>2</i>
Hex code (type L to list codes): <i>82</i>
Changed system type of partition 2 to 82 (Linux swap)
</pre>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread
* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2008-01-04 17:36 Xavier Neys
0 siblings, 0 replies; 11+ messages in thread
From: Xavier Neys @ 2008-01-04 17:36 UTC (permalink / raw
To: gentoo-doc-cvs
neysx 08/01/04 17:36:52
Modified: hb-install-alpha-disk.xml
Log:
Fixed partition number in <pre>, Tx to cla
Revision Changes Path
1.27 xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml
file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml?rev=1.27&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml?rev=1.27&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml?r1=1.26&r2=1.27
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v
retrieving revision 1.26
retrieving revision 1.27
diff -u -r1.26 -r1.27
--- hb-install-alpha-disk.xml 26 Jun 2007 07:07:27 -0000 1.26
+++ hb-install-alpha-disk.xml 4 Jan 2008 17:36:52 -0000 1.27
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v 1.26 2007/06/26 07:07:27 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v 1.27 2008/01/04 17:36:52 neysx Exp $ -->
<sections>
-<version>8.1</version>
-<date>2007-06-26</date>
+<version>8.2</version>
+<date>2008-01-04</date>
<section>
<title>Introduction to Block Devices</title>
@@ -539,7 +539,7 @@
Last cylinder or +size or +sizeM or +sizeK (17-8727, default 8727): <i>+1000M</i>
Command (m for help): <i>t</i>
-Partition number (1-4): <i>1</i>
+Partition number (1-4): <i>2</i>
Hex code (type L to list codes): <i>82</i>
Changed system type of partition 2 to 82 (Linux swap)
</pre>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread
* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2006-06-21 1:51 Josh Saddler
0 siblings, 0 replies; 11+ messages in thread
From: Josh Saddler @ 2006-06-21 1:51 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 06/06/21 01:51:07
Modified: hb-install-alpha-disk.xml
Log:
added bootloader note for bug 137410, thanks to tcort for the patch
Revision Changes Path
1.3 xml/htdocs/doc/en/handbook/2006.0/hb-install-alpha-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2006.0/hb-install-alpha-disk.xml?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2006.0/hb-install-alpha-disk.xml?rev=1.3&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2006.0/hb-install-alpha-disk.xml.diff?r1=1.2&r2=1.3&cvsroot=gentoo
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2006.0/hb-install-alpha-disk.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- hb-install-alpha-disk.xml 27 Feb 2006 00:37:17 -0000 1.2
+++ hb-install-alpha-disk.xml 21 Jun 2006 01:51:07 -0000 1.3
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2006.0/hb-install-alpha-disk.xml,v 1.2 2006/02/27 00:37:17 fox2mike Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2006.0/hb-install-alpha-disk.xml,v 1.3 2006/06/21 01:51:07 nightmorph Exp $ -->
<sections>
-<version>6.0</version>
-<date>2006-02-27</date>
+<version>6.1</version>
+<date>2006-06-20</date>
<section>
<title>Introduction to Block Devices</title>
@@ -645,6 +645,11 @@
Alpha architecture.
</p>
+<note>
+<c>aboot</c> only supports booting from <b>ext2</b> and <b>ext3</b>
+partitions.
+</note>
+
<p>
<b>ext2</b> is the tried and true Linux filesystem but doesn't have metadata
journaling, which means that routine ext2 filesystem checks at startup time can
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread
* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2006-06-21 1:49 Josh Saddler
0 siblings, 0 replies; 11+ messages in thread
From: Josh Saddler @ 2006-06-21 1:49 UTC (permalink / raw
To: gentoo-doc-cvs
nightmorph 06/06/21 01:49:06
Modified: hb-install-alpha-disk.xml
Log:
added bootloader note for bug 137410, thanks to tcort for the patch
Revision Changes Path
1.21 xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml?rev=1.21&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml?rev=1.21&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml.diff?r1=1.20&r2=1.21&cvsroot=gentoo
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -r1.20 -r1.21
--- hb-install-alpha-disk.xml 25 Aug 2005 19:22:50 -0000 1.20
+++ hb-install-alpha-disk.xml 21 Jun 2006 01:49:06 -0000 1.21
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v 1.20 2005/08/25 19:22:50 neysx Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v 1.21 2006/06/21 01:49:06 nightmorph Exp $ -->
<sections>
-<version>2.3</version>
-<date>2005-08-25</date>
+<version>2.4</version>
+<date>2006-06-20</date>
<section>
<title>Introduction to Block Devices</title>
@@ -645,6 +645,11 @@
Alpha architecture.
</p>
+<note>
+<c>aboot</c> only supports booting from <b>ext2</b> and <b>ext3</b>
+partitions.
+</note>
+
<p>
<b>ext2</b> is the tried and true Linux filesystem but doesn't have metadata
journaling, which means that routine ext2 filesystem checks at startup time can
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread
* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2005-08-25 19:22 Xavier Neys
0 siblings, 0 replies; 11+ messages in thread
From: Xavier Neys @ 2005-08-25 19:22 UTC (permalink / raw
To: gentoo-doc-cvs
neysx 05/08/25 19:22:50
Modified: xml/htdocs/doc/en/handbook/2005.1 hb-install-alpha-disk.xml
hb-install-amd64-disk.xml hb-install-hppa-disk.xml
hb-install-ppc-disk.xml hb-install-ppc64-disk.xml
hb-install-sparc-disk.xml hb-install-x86-disk.xml
Log:
#103723 warning about mount -t ext3 not required anymore
Revision Changes Path
1.3 +3 -10 xml/htdocs/doc/en/handbook/2005.1/hb-install-alpha-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-alpha-disk.xml?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-alpha-disk.xml?rev=1.3&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-alpha-disk.xml.diff?r1=1.2&r2=1.3&cvsroot=gentoo
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-alpha-disk.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- hb-install-alpha-disk.xml 8 Aug 2005 13:24:46 -0000 1.2
+++ hb-install-alpha-disk.xml 25 Aug 2005 19:22:50 -0000 1.3
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-alpha-disk.xml,v 1.2 2005/08/08 13:24:46 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-alpha-disk.xml,v 1.3 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>5.0</version>
-<date>2005-08-08</date>
+<version>5.1</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -783,15 +783,8 @@
example we mount the root and boot partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mount /dev/sda2 /mnt/gentoo</i>
-<comment>(For ext3 partitions:)</comment>
-# <i>mount -t ext3 /dev/sda2 /mnt/gentoo</i>
</pre>
<note>
1.3 +3 -11 xml/htdocs/doc/en/handbook/2005.1/hb-install-amd64-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-amd64-disk.xml?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-amd64-disk.xml?rev=1.3&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-amd64-disk.xml.diff?r1=1.2&r2=1.3&cvsroot=gentoo
Index: hb-install-amd64-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-amd64-disk.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- hb-install-amd64-disk.xml 8 Aug 2005 13:24:46 -0000 1.2
+++ hb-install-amd64-disk.xml 25 Aug 2005 19:22:50 -0000 1.3
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-amd64-disk.xml,v 1.2 2005/08/08 13:24:46 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-amd64-disk.xml,v 1.3 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>5.0</version>
-<date>2005-08-08</date>
+<version>5.1</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -643,16 +643,8 @@
example we mount the root and boot partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mount /dev/hda3 /mnt/gentoo</i>
-<comment>(For ext3 partitions:)</comment>
-# <i>mount -t ext3 /dev/hda3 /mnt/gentoo</i>
-
# <i>mkdir /mnt/gentoo/boot</i>
# <i>mount /dev/hda1 /mnt/gentoo/boot</i>
</pre>
1.3 +3 -11 xml/htdocs/doc/en/handbook/2005.1/hb-install-hppa-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-hppa-disk.xml?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-hppa-disk.xml?rev=1.3&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-hppa-disk.xml.diff?r1=1.2&r2=1.3&cvsroot=gentoo
Index: hb-install-hppa-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-hppa-disk.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- hb-install-hppa-disk.xml 8 Aug 2005 13:24:46 -0000 1.2
+++ hb-install-hppa-disk.xml 25 Aug 2005 19:22:50 -0000 1.3
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-hppa-disk.xml,v 1.2 2005/08/08 13:24:46 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-hppa-disk.xml,v 1.3 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>5.0</version>
-<date>2005-08-08</date>
+<version>5.1</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -340,16 +340,8 @@
example we mount the root and boot partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mount /dev/sda4 /mnt/gentoo</i>
-<comment>(For ext3 partitions:)</comment>
-# <i>mount -t ext3 /dev/sda4 /mnt/gentoo</i>
-
# <i>mkdir /mnt/gentoo/boot</i>
# <i>mount /dev/sda2 /mnt/gentoo/boot</i>
</pre>
1.3 +3 -10 xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc-disk.xml?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc-disk.xml?rev=1.3&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc-disk.xml.diff?r1=1.2&r2=1.3&cvsroot=gentoo
Index: hb-install-ppc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc-disk.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- hb-install-ppc-disk.xml 8 Aug 2005 13:24:46 -0000 1.2
+++ hb-install-ppc-disk.xml 25 Aug 2005 19:22:50 -0000 1.3
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc-disk.xml,v 1.2 2005/08/08 13:24:46 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc-disk.xml,v 1.3 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>5.0</version>
-<date>2005-08-08</date>
+<version>5.1</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -511,16 +511,9 @@
example we create a mount-point and mount the root partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mkdir /mnt/gentoo</i>
# <i>mount /dev/hda4 /mnt/gentoo</i>
-<comment>(For ext3 partitions:)</comment>
-# <i>mount -t ext3 /dev/hda4 /mnt/gentoo</i>
</pre>
<note>
1.2 +3 -8 xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc64-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc64-disk.xml?rev=1.2&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc64-disk.xml?rev=1.2&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc64-disk.xml.diff?r1=1.1&r2=1.2&cvsroot=gentoo
Index: hb-install-ppc64-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc64-disk.xml,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- hb-install-ppc64-disk.xml 8 Aug 2005 13:21:15 -0000 1.1
+++ hb-install-ppc64-disk.xml 25 Aug 2005 19:22:50 -0000 1.2
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc64-disk.xml,v 1.1 2005/08/08 13:21:15 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-ppc64-disk.xml,v 1.2 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>5.0</version>
-<date>2005-08-08</date>
+<version>5.1</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -701,11 +701,6 @@
example we create a mount-point and mount the root and boot partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mkdir /mnt/gentoo</i>
# <i>mount /dev/sda4 /mnt/gentoo</i>
1.3 +3 -11 xml/htdocs/doc/en/handbook/2005.1/hb-install-sparc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-sparc-disk.xml?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-sparc-disk.xml?rev=1.3&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-sparc-disk.xml.diff?r1=1.2&r2=1.3&cvsroot=gentoo
Index: hb-install-sparc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-sparc-disk.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- hb-install-sparc-disk.xml 8 Aug 2005 13:24:46 -0000 1.2
+++ hb-install-sparc-disk.xml 25 Aug 2005 19:22:50 -0000 1.3
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-sparc-disk.xml,v 1.2 2005/08/08 13:24:46 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-sparc-disk.xml,v 1.3 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>5.0</version>
-<date>2005-08-08</date>
+<version>5.1</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -603,16 +603,8 @@
example:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mount /dev/sda1 /mnt/gentoo</i>
-<comment>(For an ext3 partition:)</comment>
-# <i>mount -t ext3 /dev/sda1 /mnt/gentoo</i>
-
# <i>mkdir /mnt/gentoo/usr</i>
# <i>mount /dev/sda4 /mnt/gentoo/usr</i>
# <i>mkdir /mnt/gentoo/var</i>
1.3 +3 -11 xml/htdocs/doc/en/handbook/2005.1/hb-install-x86-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-x86-disk.xml?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-x86-disk.xml?rev=1.3&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.1/hb-install-x86-disk.xml.diff?r1=1.2&r2=1.3&cvsroot=gentoo
Index: hb-install-x86-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-x86-disk.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- hb-install-x86-disk.xml 8 Aug 2005 13:24:46 -0000 1.2
+++ hb-install-x86-disk.xml 25 Aug 2005 19:22:50 -0000 1.3
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-x86-disk.xml,v 1.2 2005/08/08 13:24:46 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.1/hb-install-x86-disk.xml,v 1.3 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>5.0</version>
-<date>2005-08-08</date>
+<version>5.1</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -650,16 +650,8 @@
example we mount the root and boot partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mount /dev/hda3 /mnt/gentoo</i>
-<comment>(For an ext3 partition:)</comment>
-# <i>mount -t ext3 /dev/hda3 /mnt/gentoo</i>
-
# <i>mkdir /mnt/gentoo/boot</i>
# <i>mount /dev/hda1 /mnt/gentoo/boot</i>
</pre>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2005-08-25 19:22 Xavier Neys
0 siblings, 0 replies; 11+ messages in thread
From: Xavier Neys @ 2005-08-25 19:22 UTC (permalink / raw
To: gentoo-doc-cvs
neysx 05/08/25 19:22:50
Modified: xml/htdocs/doc/en/handbook hb-install-alpha-disk.xml
hb-install-amd64-disk.xml hb-install-ppc-disk.xml
hb-install-ppc64-disk.xml hb-install-sparc-disk.xml
hb-install-x86-disk.xml
Log:
#103723 warning about mount -t ext3 not required anymore
Revision Changes Path
1.20 +3 -10 xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml?rev=1.20&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml?rev=1.20&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml.diff?r1=1.19&r2=1.20&cvsroot=gentoo
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v
retrieving revision 1.19
retrieving revision 1.20
diff -u -r1.19 -r1.20
--- hb-install-alpha-disk.xml 2 Aug 2005 08:03:53 -0000 1.19
+++ hb-install-alpha-disk.xml 25 Aug 2005 19:22:50 -0000 1.20
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v 1.19 2005/08/02 08:03:53 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v 1.20 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>2.2</version>
-<date>2005-08-02</date>
+<version>2.3</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -783,15 +783,8 @@
example we mount the root and boot partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mount /dev/sda2 /mnt/gentoo</i>
-<comment>(For ext3 partitions:)</comment>
-# <i>mount -t ext3 /dev/sda2 /mnt/gentoo</i>
</pre>
<note>
1.22 +3 -8 xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml?rev=1.22&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml?rev=1.22&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml.diff?r1=1.21&r2=1.22&cvsroot=gentoo
Index: hb-install-amd64-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml,v
retrieving revision 1.21
retrieving revision 1.22
diff -u -r1.21 -r1.22
--- hb-install-amd64-disk.xml 2 Aug 2005 08:03:53 -0000 1.21
+++ hb-install-amd64-disk.xml 25 Aug 2005 19:22:50 -0000 1.22
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml,v 1.21 2005/08/02 08:03:53 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml,v 1.22 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>2.3</version>
-<date>2005-08-02</date>
+<version>2.4</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -645,11 +645,6 @@
example we mount the root and boot partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mount /dev/hda3 /mnt/gentoo</i>
# <i>mkdir /mnt/gentoo/boot</i>
1.32 +3 -10 xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml?rev=1.32&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml?rev=1.32&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml.diff?r1=1.31&r2=1.32&cvsroot=gentoo
Index: hb-install-ppc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml,v
retrieving revision 1.31
retrieving revision 1.32
diff -u -r1.31 -r1.32
--- hb-install-ppc-disk.xml 9 Aug 2005 09:43:58 -0000 1.31
+++ hb-install-ppc-disk.xml 25 Aug 2005 19:22:50 -0000 1.32
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml,v 1.31 2005/08/09 09:43:58 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml,v 1.32 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>2.3</version>
-<date>2005-08-09</date>
+<version>2.4</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -512,16 +512,9 @@
example we create a mount-point and mount the root partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mkdir /mnt/gentoo</i>
# <i>mount /dev/hda4 /mnt/gentoo</i>
-<comment>(For ext3 partitions:)</comment>
-# <i>mount -t ext3 /dev/hda4 /mnt/gentoo</i>
</pre>
<note>
1.21 +3 -8 xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml?rev=1.21&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml?rev=1.21&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml.diff?r1=1.20&r2=1.21&cvsroot=gentoo
Index: hb-install-ppc64-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -r1.20 -r1.21
--- hb-install-ppc64-disk.xml 2 Aug 2005 08:03:53 -0000 1.20
+++ hb-install-ppc64-disk.xml 25 Aug 2005 19:22:50 -0000 1.21
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml,v 1.20 2005/08/02 08:03:53 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml,v 1.21 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>2.4</version>
-<date>2005-08-02</date>
+<version>2.5</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -703,11 +703,6 @@
example we create a mount-point and mount the root and boot partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mkdir /mnt/gentoo</i>
# <i>mount /dev/sda4 /mnt/gentoo</i>
1.22 +3 -8 xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml?rev=1.22&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml?rev=1.22&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml.diff?r1=1.21&r2=1.22&cvsroot=gentoo
Index: hb-install-sparc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml,v
retrieving revision 1.21
retrieving revision 1.22
diff -u -r1.21 -r1.22
--- hb-install-sparc-disk.xml 2 Aug 2005 08:03:53 -0000 1.21
+++ hb-install-sparc-disk.xml 25 Aug 2005 19:22:50 -0000 1.22
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml,v 1.21 2005/08/02 08:03:53 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml,v 1.22 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>2.3</version>
-<date>2005-08-02</date>
+<version>2.4</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -603,11 +603,6 @@
example:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mount /dev/sda1 /mnt/gentoo</i>
# <i>mkdir /mnt/gentoo/usr</i>
1.24 +3 -8 xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml?rev=1.24&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml?rev=1.24&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml.diff?r1=1.23&r2=1.24&cvsroot=gentoo
Index: hb-install-x86-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml,v
retrieving revision 1.23
retrieving revision 1.24
diff -u -r1.23 -r1.24
--- hb-install-x86-disk.xml 2 Aug 2005 08:03:53 -0000 1.23
+++ hb-install-x86-disk.xml 25 Aug 2005 19:22:50 -0000 1.24
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml,v 1.23 2005/08/02 08:03:53 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml,v 1.24 2005/08/25 19:22:50 neysx Exp $ -->
<sections>
-<version>2.3</version>
-<date>2005-08-02</date>
+<version>2.4</version>
+<date>2005-08-25</date>
<section>
<title>Introduction to Block Devices</title>
@@ -651,11 +651,6 @@
example we mount the root and boot partition:
</p>
-<warn>
-Due to a bug in the e2fsprogs package, you need to explicitly use
-the <c>mount -t ext3</c> option if you are using an ext3 filesystem.
-</warn>
-
<pre caption="Mounting partitions">
# <i>mount /dev/hda3 /mnt/gentoo</i>
# <i>mkdir /mnt/gentoo/boot</i>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2005-08-08 14:02 swift
0 siblings, 0 replies; 11+ messages in thread
From: swift @ 2005-08-08 14:02 UTC (permalink / raw
To: gentoo-doc-cvs
swift 05/08/08 14:02:32
Removed: xml/htdocs/doc/en/handbook/draft/2005.1
hb-install-alpha-disk.xml
Log:
Removing hb-install-alpha-disk.xml from this location
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2005-08-02 8:03 Sven Vermeulen
0 siblings, 0 replies; 11+ messages in thread
From: Sven Vermeulen @ 2005-08-02 8:03 UTC (permalink / raw
To: gentoo-doc-cvs
swift 05/08/02 08:03:54
Modified: xml/htdocs/doc/en/handbook/draft/2005.1
hb-install-alpha-disk.xml hb-install-amd64-disk.xml
hb-install-hppa-disk.xml hb-install-ppc-disk.xml
hb-install-ppc64-disk.xml hb-install-sparc-disk.xml
hb-install-x86-disk.xml
Log:
#101034 - Adding "-O dir_index" information to the guide
Leaving it out of the real example mke2fs command to "stage" it. When we know
more about this b-tree stability and architectural support we can follow the
SPARC handbook and use it by default.
Revision Changes Path
1.2 +4 -3 xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-alpha-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-alpha-disk.xml?rev=1.2&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-alpha-disk.xml?rev=1.2&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-alpha-disk.xml.diff?r1=1.1&r2=1.2&cvsroot=gentoo
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-alpha-disk.xml,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- hb-install-alpha-disk.xml 5 Jul 2005 08:02:04 -0000 1.1
+++ hb-install-alpha-disk.xml 2 Aug 2005 08:03:54 -0000 1.2
@@ -4,7 +4,7 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-alpha-disk.xml,v 1.1 2005/07/05 08:02:04 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-alpha-disk.xml,v 1.2 2005/08/02 08:03:54 swift Exp $ -->
<sections>
@@ -660,8 +660,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.2 +4 -3 xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-amd64-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-amd64-disk.xml?rev=1.2&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-amd64-disk.xml?rev=1.2&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-amd64-disk.xml.diff?r1=1.1&r2=1.2&cvsroot=gentoo
Index: hb-install-amd64-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-amd64-disk.xml,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- hb-install-amd64-disk.xml 5 Jul 2005 08:02:04 -0000 1.1
+++ hb-install-amd64-disk.xml 2 Aug 2005 08:03:54 -0000 1.2
@@ -4,7 +4,7 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-amd64-disk.xml,v 1.1 2005/07/05 08:02:04 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-amd64-disk.xml,v 1.2 2005/08/02 08:03:54 swift Exp $ -->
<sections>
@@ -519,8 +519,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.4 +4 -3 xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-hppa-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-hppa-disk.xml?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-hppa-disk.xml?rev=1.4&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-hppa-disk.xml.diff?r1=1.3&r2=1.4&cvsroot=gentoo
Index: hb-install-hppa-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-hppa-disk.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- hb-install-hppa-disk.xml 5 Jul 2005 08:17:48 -0000 1.3
+++ hb-install-hppa-disk.xml 2 Aug 2005 08:03:54 -0000 1.4
@@ -4,7 +4,7 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-hppa-disk.xml,v 1.3 2005/07/05 08:17:48 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-hppa-disk.xml,v 1.4 2005/08/02 08:03:54 swift Exp $ -->
<sections>
@@ -215,8 +215,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.3 +4 -3 xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc-disk.xml?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc-disk.xml?rev=1.3&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc-disk.xml.diff?r1=1.2&r2=1.3&cvsroot=gentoo
Index: hb-install-ppc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc-disk.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- hb-install-ppc-disk.xml 28 Jul 2005 16:42:03 -0000 1.2
+++ hb-install-ppc-disk.xml 2 Aug 2005 08:03:54 -0000 1.3
@@ -4,7 +4,7 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc-disk.xml,v 1.2 2005/07/28 16:42:03 josejx Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc-disk.xml,v 1.3 2005/08/02 08:03:54 swift Exp $ -->
<sections>
@@ -390,8 +390,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.3 +4 -3 xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc64-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc64-disk.xml?rev=1.3&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc64-disk.xml?rev=1.3&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc64-disk.xml.diff?r1=1.2&r2=1.3&cvsroot=gentoo
Index: hb-install-ppc64-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc64-disk.xml,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- hb-install-ppc64-disk.xml 2 Aug 2005 05:16:36 -0000 1.2
+++ hb-install-ppc64-disk.xml 2 Aug 2005 08:03:54 -0000 1.3
@@ -4,7 +4,7 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc64-disk.xml,v 1.2 2005/08/02 05:16:36 fox2mike Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-ppc64-disk.xml,v 1.3 2005/08/02 08:03:54 swift Exp $ -->
<sections>
@@ -578,8 +578,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.2 +3 -2 xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-sparc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-sparc-disk.xml?rev=1.2&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-sparc-disk.xml?rev=1.2&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-sparc-disk.xml.diff?r1=1.1&r2=1.2&cvsroot=gentoo
Index: hb-install-sparc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-sparc-disk.xml,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- hb-install-sparc-disk.xml 5 Jul 2005 08:02:04 -0000 1.1
+++ hb-install-sparc-disk.xml 2 Aug 2005 08:03:54 -0000 1.2
@@ -4,7 +4,7 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-sparc-disk.xml,v 1.1 2005/07/05 08:02:04 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-sparc-disk.xml,v 1.2 2005/08/02 08:03:54 swift Exp $ -->
<sections>
@@ -515,7 +515,8 @@
metadata journaling for fast recovery as well as other enhanced journaling
modes like full-data and ordered-data journaling. Ext3 has an additional hashed
b-tree indexing option that enables high performance in almost all situations.
-Ext3 makes an excellent and reliable alternative to ext2.
+You can enable this indexing by adding <c>-O dir_index</c> to the <c>mke2fs</c>
+command. Ext3 makes an excellent and reliable alternative to ext2.
</p>
</body>
1.2 +4 -3 xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-x86-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-x86-disk.xml?rev=1.2&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-x86-disk.xml?rev=1.2&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-x86-disk.xml.diff?r1=1.1&r2=1.2&cvsroot=gentoo
Index: hb-install-x86-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-x86-disk.xml,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- hb-install-x86-disk.xml 5 Jul 2005 08:02:04 -0000 1.1
+++ hb-install-x86-disk.xml 2 Aug 2005 08:03:54 -0000 1.2
@@ -4,7 +4,7 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-x86-disk.xml,v 1.1 2005/07/05 08:02:04 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/draft/2005.1/hb-install-x86-disk.xml,v 1.2 2005/08/02 08:03:54 swift Exp $ -->
<sections>
@@ -525,8 +525,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2005-08-02 8:03 Sven Vermeulen
0 siblings, 0 replies; 11+ messages in thread
From: Sven Vermeulen @ 2005-08-02 8:03 UTC (permalink / raw
To: gentoo-doc-cvs
swift 05/08/02 08:03:54
Modified: xml/htdocs/doc/en/handbook hb-install-alpha-disk.xml
hb-install-amd64-disk.xml hb-install-hppa-disk.xml
hb-install-mips-disk.xml hb-install-ppc-disk.xml
hb-install-ppc64-disk.xml hb-install-sparc-disk.xml
hb-install-x86-disk.xml
Log:
#101034 - Adding "-O dir_index" information to the guide
Leaving it out of the real example mke2fs command to "stage" it. When we know
more about this b-tree stability and architectural support we can follow the
SPARC handbook and use it by default.
Revision Changes Path
1.19 +6 -5 xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml?rev=1.19&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml?rev=1.19&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml.diff?r1=1.18&r2=1.19&cvsroot=gentoo
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v
retrieving revision 1.18
retrieving revision 1.19
diff -u -r1.18 -r1.19
--- hb-install-alpha-disk.xml 10 Jun 2005 18:15:33 -0000 1.18
+++ hb-install-alpha-disk.xml 2 Aug 2005 08:03:53 -0000 1.19
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v 1.18 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-alpha-disk.xml,v 1.19 2005/08/02 08:03:53 swift Exp $ -->
<sections>
-<version>2.1</version>
-<date>2005-06-10</date>
+<version>2.2</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -660,8 +660,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.21 +6 -5 xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml?rev=1.21&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml?rev=1.21&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml.diff?r1=1.20&r2=1.21&cvsroot=gentoo
Index: hb-install-amd64-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -r1.20 -r1.21
--- hb-install-amd64-disk.xml 10 Jun 2005 18:15:33 -0000 1.20
+++ hb-install-amd64-disk.xml 2 Aug 2005 08:03:53 -0000 1.21
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml,v 1.20 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-amd64-disk.xml,v 1.21 2005/08/02 08:03:53 swift Exp $ -->
<sections>
-<version>2.2</version>
-<date>2005-06-10</date>
+<version>2.3</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -521,8 +521,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.17 +6 -5 xml/htdocs/doc/en/handbook/hb-install-hppa-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-hppa-disk.xml?rev=1.17&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-hppa-disk.xml?rev=1.17&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-hppa-disk.xml.diff?r1=1.16&r2=1.17&cvsroot=gentoo
Index: hb-install-hppa-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-hppa-disk.xml,v
retrieving revision 1.16
retrieving revision 1.17
diff -u -r1.16 -r1.17
--- hb-install-hppa-disk.xml 10 Jun 2005 18:15:33 -0000 1.16
+++ hb-install-hppa-disk.xml 2 Aug 2005 08:03:53 -0000 1.17
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-hppa-disk.xml,v 1.16 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-hppa-disk.xml,v 1.17 2005/08/02 08:03:53 swift Exp $ -->
<sections>
-<version>1.11</version>
-<date>2005-06-10</date>
+<version>1.12</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -216,8 +216,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.15 +6 -5 xml/htdocs/doc/en/handbook/hb-install-mips-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-mips-disk.xml?rev=1.15&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-mips-disk.xml?rev=1.15&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-mips-disk.xml.diff?r1=1.14&r2=1.15&cvsroot=gentoo
Index: hb-install-mips-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-mips-disk.xml,v
retrieving revision 1.14
retrieving revision 1.15
diff -u -r1.14 -r1.15
--- hb-install-mips-disk.xml 14 Jun 2005 10:18:25 -0000 1.14
+++ hb-install-mips-disk.xml 2 Aug 2005 08:03:53 -0000 1.15
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-mips-disk.xml,v 1.14 2005/06/14 10:18:25 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-mips-disk.xml,v 1.15 2005/08/02 08:03:53 swift Exp $ -->
<sections>
-<version>1.9</version>
-<date>2005-06-10</date>
+<version>1.10</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -550,8 +550,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.30 +6 -5 xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml?rev=1.30&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml?rev=1.30&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml.diff?r1=1.29&r2=1.30&cvsroot=gentoo
Index: hb-install-ppc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml,v
retrieving revision 1.29
retrieving revision 1.30
diff -u -r1.29 -r1.30
--- hb-install-ppc-disk.xml 10 Jun 2005 18:15:33 -0000 1.29
+++ hb-install-ppc-disk.xml 2 Aug 2005 08:03:53 -0000 1.30
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml,v 1.29 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc-disk.xml,v 1.30 2005/08/02 08:03:53 swift Exp $ -->
<sections>
-<version>2.1</version>
-<date>2005-06-10</date>
+<version>2.2</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -392,8 +392,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.20 +6 -5 xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml?rev=1.20&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml?rev=1.20&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml.diff?r1=1.19&r2=1.20&cvsroot=gentoo
Index: hb-install-ppc64-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml,v
retrieving revision 1.19
retrieving revision 1.20
diff -u -r1.19 -r1.20
--- hb-install-ppc64-disk.xml 10 Jun 2005 18:15:33 -0000 1.19
+++ hb-install-ppc64-disk.xml 2 Aug 2005 08:03:53 -0000 1.20
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml,v 1.19 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc64-disk.xml,v 1.20 2005/08/02 08:03:53 swift Exp $ -->
<sections>
-<version>2.3</version>
-<date>2005-06-10</date>
+<version>2.4</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -579,8 +579,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.21 +5 -4 xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml?rev=1.21&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml?rev=1.21&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml.diff?r1=1.20&r2=1.21&cvsroot=gentoo
Index: hb-install-sparc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -r1.20 -r1.21
--- hb-install-sparc-disk.xml 10 Jun 2005 18:15:33 -0000 1.20
+++ hb-install-sparc-disk.xml 2 Aug 2005 08:03:53 -0000 1.21
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml,v 1.20 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-sparc-disk.xml,v 1.21 2005/08/02 08:03:53 swift Exp $ -->
<sections>
-<version>2.2</version>
-<date>2005-06-10</date>
+<version>2.3</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -515,7 +515,8 @@
metadata journaling for fast recovery as well as other enhanced journaling
modes like full-data and ordered-data journaling. Ext3 has an additional hashed
b-tree indexing option that enables high performance in almost all situations.
-Ext3 makes an excellent and reliable alternative to ext2.
+You can enable this indexing by adding <c>-O dir_index</c> to the <c>mke2fs</c>
+command. Ext3 makes an excellent and reliable alternative to ext2.
</p>
</body>
1.23 +6 -5 xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml?rev=1.23&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml?rev=1.23&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml.diff?r1=1.22&r2=1.23&cvsroot=gentoo
Index: hb-install-x86-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml,v
retrieving revision 1.22
retrieving revision 1.23
diff -u -r1.22 -r1.23
--- hb-install-x86-disk.xml 10 Jun 2005 18:15:33 -0000 1.22
+++ hb-install-x86-disk.xml 2 Aug 2005 08:03:53 -0000 1.23
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml,v 1.22 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-x86-disk.xml,v 1.23 2005/08/02 08:03:53 swift Exp $ -->
<sections>
-<version>2.2</version>
-<date>2005-06-10</date>
+<version>2.3</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -526,8 +526,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread* [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml
@ 2005-08-02 8:03 Sven Vermeulen
0 siblings, 0 replies; 11+ messages in thread
From: Sven Vermeulen @ 2005-08-02 8:03 UTC (permalink / raw
To: gentoo-doc-cvs
swift 05/08/02 08:03:54
Modified: xml/htdocs/doc/en/handbook/2005.0 hb-install-alpha-disk.xml
hb-install-amd64-disk.xml hb-install-hppa-disk.xml
hb-install-ppc-disk.xml hb-install-sparc-disk.xml
hb-install-x86-disk.xml
Log:
#101034 - Adding "-O dir_index" information to the guide
Leaving it out of the real example mke2fs command to "stage" it. When we know
more about this b-tree stability and architectural support we can follow the
SPARC handbook and use it by default.
Revision Changes Path
1.4 +6 -5 xml/htdocs/doc/en/handbook/2005.0/hb-install-alpha-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-alpha-disk.xml?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-alpha-disk.xml?rev=1.4&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-alpha-disk.xml.diff?r1=1.3&r2=1.4&cvsroot=gentoo
Index: hb-install-alpha-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-alpha-disk.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- hb-install-alpha-disk.xml 10 Jun 2005 18:15:33 -0000 1.3
+++ hb-install-alpha-disk.xml 2 Aug 2005 08:03:54 -0000 1.4
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-alpha-disk.xml,v 1.3 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-alpha-disk.xml,v 1.4 2005/08/02 08:03:54 swift Exp $ -->
<sections>
-<version>4.1</version>
-<date>2005-06-10</date>
+<version>4.2</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -660,8 +660,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.4 +6 -5 xml/htdocs/doc/en/handbook/2005.0/hb-install-amd64-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-amd64-disk.xml?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-amd64-disk.xml?rev=1.4&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-amd64-disk.xml.diff?r1=1.3&r2=1.4&cvsroot=gentoo
Index: hb-install-amd64-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-amd64-disk.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- hb-install-amd64-disk.xml 10 Jun 2005 18:15:33 -0000 1.3
+++ hb-install-amd64-disk.xml 2 Aug 2005 08:03:54 -0000 1.4
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-amd64-disk.xml,v 1.3 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-amd64-disk.xml,v 1.4 2005/08/02 08:03:54 swift Exp $ -->
<sections>
-<version>4.1</version>
-<date>2005-06-10</date>
+<version>4.2</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -519,8 +519,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.4 +6 -5 xml/htdocs/doc/en/handbook/2005.0/hb-install-hppa-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-hppa-disk.xml?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-hppa-disk.xml?rev=1.4&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-hppa-disk.xml.diff?r1=1.3&r2=1.4&cvsroot=gentoo
Index: hb-install-hppa-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-hppa-disk.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- hb-install-hppa-disk.xml 10 Jun 2005 18:15:33 -0000 1.3
+++ hb-install-hppa-disk.xml 2 Aug 2005 08:03:54 -0000 1.4
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-hppa-disk.xml,v 1.3 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-hppa-disk.xml,v 1.4 2005/08/02 08:03:54 swift Exp $ -->
<sections>
-<version>4.1</version>
-<date>2005-06-10</date>
+<version>4.2</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -215,8 +215,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.4 +6 -5 xml/htdocs/doc/en/handbook/2005.0/hb-install-ppc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-ppc-disk.xml?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-ppc-disk.xml?rev=1.4&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-ppc-disk.xml.diff?r1=1.3&r2=1.4&cvsroot=gentoo
Index: hb-install-ppc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-ppc-disk.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- hb-install-ppc-disk.xml 10 Jun 2005 18:15:33 -0000 1.3
+++ hb-install-ppc-disk.xml 2 Aug 2005 08:03:54 -0000 1.4
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-ppc-disk.xml,v 1.3 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-ppc-disk.xml,v 1.4 2005/08/02 08:03:54 swift Exp $ -->
<sections>
-<version>4.1</version>
-<date>2005-06-10</date>
+<version>4.2</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -392,8 +392,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
1.4 +5 -4 xml/htdocs/doc/en/handbook/2005.0/hb-install-sparc-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-sparc-disk.xml?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-sparc-disk.xml?rev=1.4&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-sparc-disk.xml.diff?r1=1.3&r2=1.4&cvsroot=gentoo
Index: hb-install-sparc-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-sparc-disk.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- hb-install-sparc-disk.xml 10 Jun 2005 18:15:33 -0000 1.3
+++ hb-install-sparc-disk.xml 2 Aug 2005 08:03:54 -0000 1.4
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-sparc-disk.xml,v 1.3 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-sparc-disk.xml,v 1.4 2005/08/02 08:03:54 swift Exp $ -->
<sections>
-<version>4.1</version>
-<date>2005-06-10</date>
+<version>4.2</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -515,7 +515,8 @@
metadata journaling for fast recovery as well as other enhanced journaling
modes like full-data and ordered-data journaling. Ext3 has an additional hashed
b-tree indexing option that enables high performance in almost all situations.
-Ext3 makes an excellent and reliable alternative to ext2.
+You can enable this indexing by adding <c>-O dir_index</c> to the <c>mke2fs</c>
+command. Ext3 makes an excellent and reliable alternative to ext2.
</p>
</body>
1.4 +6 -5 xml/htdocs/doc/en/handbook/2005.0/hb-install-x86-disk.xml
file : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-x86-disk.xml?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=gentoo
plain: http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-x86-disk.xml?rev=1.4&content-type=text/plain&cvsroot=gentoo
diff : http://www.gentoo.org/cgi-bin/viewcvs.cgi/xml/htdocs/doc/en/handbook/2005.0/hb-install-x86-disk.xml.diff?r1=1.3&r2=1.4&cvsroot=gentoo
Index: hb-install-x86-disk.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-x86-disk.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- hb-install-x86-disk.xml 10 Jun 2005 18:15:33 -0000 1.3
+++ hb-install-x86-disk.xml 2 Aug 2005 08:03:54 -0000 1.4
@@ -4,12 +4,12 @@
<!-- The content of this document is licensed under the CC-BY-SA license -->
<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-x86-disk.xml,v 1.3 2005/06/10 18:15:33 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/2005.0/hb-install-x86-disk.xml,v 1.4 2005/08/02 08:03:54 swift Exp $ -->
<sections>
-<version>4.1</version>
-<date>2005-06-10</date>
+<version>4.2</version>
+<date>2005-08-02</date>
<section>
<title>Introduction to Block Devices</title>
@@ -525,8 +525,9 @@
journaling for fast recovery in addition to other enhanced journaling modes like
full data and ordered data journaling. ext3 is a very good and reliable
filesystem. It has an additional hashed b-tree indexing option that enables
-high performance in almost all situations. In short, ext3 is an excellent
-filesystem.
+high performance in almost all situations. You can enable this indexing by
+adding <c>-O dir_index</c> to the <c>mke2fs</c> command. In short, ext3 is an
+excellent filesystem.
</p>
<p>
--
gentoo-doc-cvs@gentoo.org mailing list
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2008-01-04 17:37 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-08-17 2:00 [gentoo-doc-cvs] cvs commit: hb-install-alpha-disk.xml Josh Saddler
-- strict thread matches above, loose matches on Subject: below --
2008-01-04 17:36 Xavier Neys
2008-01-04 17:36 Xavier Neys
2006-06-21 1:51 Josh Saddler
2006-06-21 1:49 Josh Saddler
2005-08-25 19:22 Xavier Neys
2005-08-25 19:22 Xavier Neys
2005-08-08 14:02 swift
2005-08-02 8:03 Sven Vermeulen
2005-08-02 8:03 Sven Vermeulen
2005-08-02 8:03 Sven Vermeulen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox