Re: [gentoo-dev] Linksys Wireless USB

[Tom Prado <tprado@charter.net>]

On 9 Dec 2002, Adam Voigt wrote:

> dmesg | grep "usb" 
> 
> Produces:
> 
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> init_module: prism2_usb.o: 0.1.16-pre7 Loaded
> init_module: dev_info is: prism2_usb
> usb.c: registered new driver prism2_usb
> 
> And no, there is nothing in /proc/bus/usb.
> 
> Modprobing usb-uhci, uhci, or usb-ohci all throw error's and are not
> inserted.
> However, usb-core is loaded automatically when I modprobe the prism2
> driver.

hmm, that's not good that all the ?hci drivers return errors.  You don't 
appear to have any USB bus drivers loaded.  See which USB adapter you have 
by doing a cat /proc/pci (or use lspci) and look for the USB devices.

I.e. mine are:

00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)

and dmesg | grep usb returns:

usb-uhci.c: $Revision: 1.275 $ time 23:33:42 Dec  4 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xefe0, IRQ 11
usb-uhci.c: Detected 2 ports

You might want to check out http://www.linux-usb.org/USB-guide/book1.html 

Best of luck,
Tom


--
gentoo-dev@gentoo.org mailing list