* [gentoo-dev] documentation-problem
@ 2002-06-13 8:15 99% Stephan Wentz
0 siblings, 0 replies; 1+ results
From: Stephan Wentz @ 2002-06-13 8:15 UTC (permalink / raw
To: gentoo-dev
hi folks!
yesterday is started installing gentoo on my laptop from scratch - everything
worked fine, and the documentation is EXCELLENT! great job ;-)
he found all modules, all pcmcia-network-cards (normal ethernet and a
wlan-card).
but i found 2 things that didn't work out with my installation:
1) 14.Final steps: kernel and system logger
after i succeded with the installation and booted the first time, i got this
error-msg:
"mount_devfs_fs(): unable to mount devfs, err: -2
looked through the forums and found the solution:
in the kernel-config i checked "/dev filesystem support", but i ALSO checked
"Mount on boot", after i unchecked it, the mount_devfs_fs-error disappeared.
maybe you should put this in the red warning-section?
2) Final network configuration
where it says
"If you have a PCMCIA card installed, have a quick look into
/etc/init.d/pcmcia to verify that things seem all right for your setup"
the problem is: there is no file /etc/init.d/pcmcia!
did i miss something? i followed the instructions step-by-step, don't think i
forgot something... or do i have to create that file by myself?
3) Final steps: configure GRUB
in code listing 40 the line splashimage points to
(hd0,0)/boot/grub/splash.xpm.gz
and above you state that in your example hda1 is the boot-partition.
shouldn't it mean (hd0,0)/grub/splash.xpm.gz then? without /boot ?
and what about the kernel-line? there's the same thing... or does it mount
/dev/hda3 (like state with the root-parameter in the kernel-line) as the
root-device? then it would be ok...
now, while booting i get this error:
"Warning: unable to open an initial console.
Kernel panic: No init found. Tyr passing init= option in kernel."
i think this is because of a wrong grub-configuration... maybe you can help me
out? i have my root partition on hda4, and the boot-partition on hda3... how
would grubs menu.lst look like? is the following right, if not, where is the
error? (note: i'm using the nt-bootloader right now, because of that i
installed grub into the boot-partition, not in the mbr...)
default 0
timeout 30
splashimage=(hd0,2)/grub/splash.xpm.gz
title=My example Gentoo Linux
root (hd0,2)
kernel /bzImage root=/dev/hda3
maybe you can help me out... i'm very interested in gentoo - so i'd like to
start it ;-)
another question according to grub: like i said, i installed it into my
boot-partiton, what if i want to remove it from there and put it in the mbr?
just install it in the mbr? how to remove the version from the partition? or
is this done automatically?
so, enough for now... hope my remarks can help you make gentoo even better ;-)
stephan
^ permalink raw reply [relevance 99%]
Results 1-1 of 1 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2002-06-13 8:15 99% [gentoo-dev] documentation-problem Stephan Wentz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox