* [gentoo-dev] RFC: uid/gid for octoprint
@ 2020-02-11 10:06 Alexey 'Alexxy' Shvetsov
2020-02-11 10:15 ` Michał Górny
0 siblings, 1 reply; 10+ messages in thread
From: Alexey 'Alexxy' Shvetsov @ 2020-02-11 10:06 UTC (permalink / raw
To: gentoo-dev
[-- Attachment #1: Type: text/plain, Size: 150 bytes --]
Hi all!
I'd like to reserve uid/gid 34 (3D printing) for www-apps/octoprint (cups
analog for 3d printing)
--
Best regards,
Alexey 'Alexxy' Shvetsov
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-dev] RFC: uid/gid for octoprint
2020-02-11 10:06 [gentoo-dev] RFC: uid/gid for octoprint Alexey 'Alexxy' Shvetsov
@ 2020-02-11 10:15 ` Michał Górny
2020-02-11 10:18 ` Alexey 'Alexxy' Shvetsov
2020-02-11 10:20 ` Alexey 'Alexxy' Shvetsov
0 siblings, 2 replies; 10+ messages in thread
From: Michał Górny @ 2020-02-11 10:15 UTC (permalink / raw
To: gentoo-dev
[-- Attachment #1: Type: text/plain, Size: 292 bytes --]
On Tue, 2020-02-11 at 13:06 +0300, Alexey 'Alexxy' Shvetsov wrote:
> Hi all!
>
> I'd like to reserve uid/gid 34 (3D printing) for www-apps/octoprint (cups
> analog for 3d printing)
What is the rationale for taking UID/GID from the low range?
--
Best regards,
Michał Górny
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 618 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-dev] RFC: uid/gid for octoprint
2020-02-11 10:15 ` Michał Górny
@ 2020-02-11 10:18 ` Alexey 'Alexxy' Shvetsov
2020-02-11 10:52 ` Michał Górny
2020-02-11 10:20 ` Alexey 'Alexxy' Shvetsov
1 sibling, 1 reply; 10+ messages in thread
From: Alexey 'Alexxy' Shvetsov @ 2020-02-11 10:18 UTC (permalink / raw
To: gentoo-dev; +Cc: Michał Górny
[-- Attachment #1: Type: text/plain, Size: 479 bytes --]
В письме от вторник, 11 февраля 2020 г. 13:15:48 MSK пользователь Michał Górny
написал:
> On Tue, 2020-02-11 at 13:06 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > Hi all!
> >
> > I'd like to reserve uid/gid 34 (3D printing) for www-apps/octoprint (cups
> > analog for 3d printing)
>
> What is the rationale for taking UID/GID from the low range?
3 D (D is the 4 letter in latin alphabet)
--
Best regards,
Alexey 'Alexxy' Shvetsov
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-dev] RFC: uid/gid for octoprint
2020-02-11 10:18 ` Alexey 'Alexxy' Shvetsov
@ 2020-02-11 10:52 ` Michał Górny
2020-02-11 11:15 ` Alexey 'Alexxy' Shvetsov
0 siblings, 1 reply; 10+ messages in thread
From: Michał Górny @ 2020-02-11 10:52 UTC (permalink / raw
To: gentoo-dev
[-- Attachment #1: Type: text/plain, Size: 622 bytes --]
On Tue, 2020-02-11 at 13:18 +0300, Alexey 'Alexxy' Shvetsov wrote:
> В письме от вторник, 11 февраля 2020 г. 13:15:48 MSK пользователь Michał Górny
> написал:
> > On Tue, 2020-02-11 at 13:06 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > > Hi all!
> > >
> > > I'd like to reserve uid/gid 34 (3D printing) for www-apps/octoprint (cups
> > > analog for 3d printing)
> >
> > What is the rationale for taking UID/GID from the low range?
>
> 3 D (D is the 4 letter in latin alphabet)
>
That's not a good justification. NAK.
--
Best regards,
Michał Górny
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 618 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-dev] RFC: uid/gid for octoprint
2020-02-11 10:52 ` Michał Górny
@ 2020-02-11 11:15 ` Alexey 'Alexxy' Shvetsov
2020-02-11 11:17 ` Michał Górny
2020-02-11 11:27 ` Ulrich Mueller
0 siblings, 2 replies; 10+ messages in thread
From: Alexey 'Alexxy' Shvetsov @ 2020-02-11 11:15 UTC (permalink / raw
To: gentoo-dev; +Cc: Michał Górny
[-- Attachment #1: Type: text/plain, Size: 815 bytes --]
В письме от вторник, 11 февраля 2020 г. 13:52:46 MSK пользователь Michał Górny
написал:
> On Tue, 2020-02-11 at 13:18 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > В письме от вторник, 11 февраля 2020 г. 13:15:48 MSK пользователь Michał
> > Górny>
> > написал:
> > > On Tue, 2020-02-11 at 13:06 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > > > Hi all!
> > > >
> > > > I'd like to reserve uid/gid 34 (3D printing) for www-apps/octoprint
> > > > (cups
> > > > analog for 3d printing)
> > >
> > > What is the rationale for taking UID/GID from the low range?
> >
> > 3 D (D is the 4 letter in latin alphabet)
>
> That's not a good justification. NAK.
Ok. What is you're suggestion?
--
Best regards,
Alexey 'Alexxy' Shvetsov
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-dev] RFC: uid/gid for octoprint
2020-02-11 11:15 ` Alexey 'Alexxy' Shvetsov
@ 2020-02-11 11:17 ` Michał Górny
2020-02-11 11:25 ` Alexey 'Alexxy' Shvetsov
2020-02-11 11:27 ` Ulrich Mueller
1 sibling, 1 reply; 10+ messages in thread
From: Michał Górny @ 2020-02-11 11:17 UTC (permalink / raw
To: gentoo-dev
[-- Attachment #1: Type: text/plain, Size: 985 bytes --]
On Tue, 2020-02-11 at 14:15 +0300, Alexey 'Alexxy' Shvetsov wrote:
> В письме от вторник, 11 февраля 2020 г. 13:52:46 MSK пользователь Michał Górny
> написал:
> > On Tue, 2020-02-11 at 13:18 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > > В письме от вторник, 11 февраля 2020 г. 13:15:48 MSK пользователь Michał
> > > Górny>
> > > написал:
> > > > On Tue, 2020-02-11 at 13:06 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > > > > Hi all!
> > > > >
> > > > > I'd like to reserve uid/gid 34 (3D printing) for www-apps/octoprint
> > > > > (cups
> > > > > analog for 3d printing)
> > > >
> > > > What is the rationale for taking UID/GID from the low range?
> > >
> > > 3 D (D is the 4 letter in latin alphabet)
> >
> > That's not a good justification. NAK.
>
> Ok. What is you're suggestion?
>
Take any number in the 101..499 range, as indicated in the policy.
--
Best regards,
Michał Górny
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 618 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-dev] RFC: uid/gid for octoprint
2020-02-11 11:17 ` Michał Górny
@ 2020-02-11 11:25 ` Alexey 'Alexxy' Shvetsov
0 siblings, 0 replies; 10+ messages in thread
From: Alexey 'Alexxy' Shvetsov @ 2020-02-11 11:25 UTC (permalink / raw
To: gentoo-dev; +Cc: Michał Górny
[-- Attachment #1: Type: text/plain, Size: 1257 bytes --]
Ok.
So it can be 340 for both uid an gid (its free)
В письме от вторник, 11 февраля 2020 г. 14:17:48 MSK пользователь Michał Górny
написал:
> On Tue, 2020-02-11 at 14:15 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > В письме от вторник, 11 февраля 2020 г. 13:52:46 MSK пользователь Michał
> > Górny>
> > написал:
> > > On Tue, 2020-02-11 at 13:18 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > > > В письме от вторник, 11 февраля 2020 г. 13:15:48 MSK пользователь
> > > > Michał
> > > > Górny>
> > > >
> > > > написал:
> > > > > On Tue, 2020-02-11 at 13:06 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > > > > > Hi all!
> > > > > >
> > > > > > I'd like to reserve uid/gid 34 (3D printing) for
> > > > > > www-apps/octoprint
> > > > > > (cups
> > > > > > analog for 3d printing)
> > > > >
> > > > > What is the rationale for taking UID/GID from the low range?
> > > >
> > > > 3 D (D is the 4 letter in latin alphabet)
> > >
> > > That's not a good justification. NAK.
> >
> > Ok. What is you're suggestion?
>
> Take any number in the 101..499 range, as indicated in the policy.
--
Best regards,
Alexey 'Alexxy' Shvetsov
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-dev] RFC: uid/gid for octoprint
2020-02-11 11:15 ` Alexey 'Alexxy' Shvetsov
2020-02-11 11:17 ` Michał Górny
@ 2020-02-11 11:27 ` Ulrich Mueller
2020-02-11 11:29 ` Alexey 'Alexxy' Shvetsov
1 sibling, 1 reply; 10+ messages in thread
From: Ulrich Mueller @ 2020-02-11 11:27 UTC (permalink / raw
To: Alexey 'Alexxy' Shvetsov; +Cc: gentoo-dev, Michał Górny
[-- Attachment #1: Type: text/plain, Size: 194 bytes --]
>>>>> On Tue, 11 Feb 2020, Alexey 'Alexxy' Shvetsov wrote:
> Ok. What is you're suggestion?
If you really need that kind of mnemonics, how about 368 (68 being the
ASCII code for "D")?
Ulrich
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 507 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-dev] RFC: uid/gid for octoprint
2020-02-11 10:15 ` Michał Górny
2020-02-11 10:18 ` Alexey 'Alexxy' Shvetsov
@ 2020-02-11 10:20 ` Alexey 'Alexxy' Shvetsov
1 sibling, 0 replies; 10+ messages in thread
From: Alexey 'Alexxy' Shvetsov @ 2020-02-11 10:20 UTC (permalink / raw
To: gentoo-dev; +Cc: Michał Górny
[-- Attachment #1: Type: text/plain, Size: 563 bytes --]
В письме от вторник, 11 февраля 2020 г. 13:15:48 MSK пользователь Michał Górny
написал:
> On Tue, 2020-02-11 at 13:06 +0300, Alexey 'Alexxy' Shvetsov wrote:
> > Hi all!
> >
> > I'd like to reserve uid/gid 34 (3D printing) for www-apps/octoprint (cups
> > analog for 3d printing)
>
> What is the rationale for taking UID/GID from the low range?
Also i seems need a group/user for uucp as dep (since octoprint need access to
/dev/tty{USB,ACM} or other types of com ports
--
Best regards,
Alexey 'Alexxy' Shvetsov
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-02-11 11:29 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-02-11 10:06 [gentoo-dev] RFC: uid/gid for octoprint Alexey 'Alexxy' Shvetsov
2020-02-11 10:15 ` Michał Górny
2020-02-11 10:18 ` Alexey 'Alexxy' Shvetsov
2020-02-11 10:52 ` Michał Górny
2020-02-11 11:15 ` Alexey 'Alexxy' Shvetsov
2020-02-11 11:17 ` Michał Górny
2020-02-11 11:25 ` Alexey 'Alexxy' Shvetsov
2020-02-11 11:27 ` Ulrich Mueller
2020-02-11 11:29 ` Alexey 'Alexxy' Shvetsov
2020-02-11 10:20 ` Alexey 'Alexxy' Shvetsov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox