[gentoo-dev] [PATCH 05/12] sys-devel/distcc: Convert to EAPI=6

["Michał Górny" <mgorny@gentoo.org>]

---
 sys-devel/distcc/distcc-3.2_rc1-r5.ebuild | 199 ++++++++++++++++++++++++++++++
 1 file changed, 199 insertions(+)
 create mode 100644 sys-devel/distcc/distcc-3.2_rc1-r5.ebuild

diff --git a/sys-devel/distcc/distcc-3.2_rc1-r5.ebuild b/sys-devel/distcc/distcc-3.2_rc1-r5.ebuild
new file mode 100644
index 000000000000..741fa929f503
--- /dev/null
+++ b/sys-devel/distcc/distcc-3.2_rc1-r5.ebuild
@@ -0,0 +1,199 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+
+PYTHON_COMPAT=( python2_7 )
+
+inherit autotools flag-o-matic python-single-r1 systemd toolchain-funcs user xdg-utils
+
+MY_P="${P/_}"
+DESCRIPTION="Distribute compilation of C code across several machines on a network"
+HOMEPAGE="http://distcc.org/"
+SRC_URI="https://distcc.googlecode.com/files/${MY_P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~sparc-fbsd ~x86-fbsd"
+IUSE="crossdev gnome gssapi gtk hardened ipv6 selinux xinetd zeroconf"
+
+RESTRICT="test"
+
+CDEPEND="${PYTHON_DEPS}
+	dev-libs/popt
+	gnome? (
+		>=gnome-base/libgnome-2
+		>=gnome-base/libgnomeui-2
+		x11-libs/gtk+:2
+		x11-libs/pango
+	)
+	gssapi? ( net-libs/libgssglue )
+	gtk? ( x11-libs/gtk+:2 )
+	zeroconf? ( >=net-dns/avahi-0.6[dbus] )
+"
+DEPEND="${CDEPEND}
+	virtual/pkgconfig"
+RDEPEND="${CDEPEND}
+	!net-misc/pump
+	>=sys-devel/gcc-config-1.4.1
+	selinux? ( sec-policy/selinux-distcc )
+	xinetd? ( sys-apps/xinetd )"
+
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+S="${WORKDIR}/${MY_P}"
+
+DCCC_PATH="/usr/$(get_libdir)/distcc/bin"
+DISTCC_VERBOSE="0"
+
+pkg_setup() {
+	enewuser distcc 240 -1 -1 daemon
+	python-single-r1_pkg_setup
+}
+
+src_prepare() {
+	eapply "${FILESDIR}/${PN}-3.0-xinetd.patch"
+	# bug #253786
+	eapply "${FILESDIR}/${PN}-3.0-fix-fortify.patch"
+	# bug #255188
+	eapply "${FILESDIR}/${PN}-3.2_rc1-freedesktop.patch"
+	# bug #258364
+	eapply "${FILESDIR}/${PN}-3.2_rc1-python.patch"
+	# for net-libs/libgssglue
+	eapply "${FILESDIR}/${PN}-3.2_rc1-gssapi.patch"
+	# SOCKSv5 support needed for Portage, bug #537616
+	eapply "${FILESDIR}/${PN}-3.2_rc1-socks5.patch"
+	eapply_user
+
+	# Bugs #120001, #167844 and probably more. See patch for description.
+	use hardened && eapply "${FILESDIR}/distcc-hardened.patch"
+
+	sed -i \
+		-e "/PATH/s:\$distcc_location:${EPREFIX}${DCCC_PATH}:" \
+		-e "s:@PYTHON@:${EPYTHON}:" \
+		pump.in || die "sed failed"
+
+	sed \
+		-e "s:@EPREFIX@:${EPREFIX:-/}:" \
+		-e "s:@libdir@:/usr/$(get_libdir):" \
+		"${FILESDIR}/3.2/distcc-config" > "${T}/distcc-config" || die
+
+	eaclocal -Im4 --output=aclocal.m4
+	eautoconf
+}
+
+src_configure() {
+	local myconf="--disable-Werror --with-docdir=\$(datadir)/doc/${PF}"
+
+	# --disable-rfc2553 b0rked, bug #254176
+	use ipv6 && myconf="${myconf} --enable-rfc2553"
+
+	econf \
+		$(use_with gtk) \
+		$(use_with gnome) \
+		$(use_with gssapi auth) \
+		$(use_with zeroconf avahi) \
+		${myconf}
+}
+
+src_install() {
+	default
+	python_optimize
+
+	newinitd "${FILESDIR}/3.2/init" distccd
+	systemd_dounit "${FILESDIR}/distccd.service"
+	systemd_install_serviced "${FILESDIR}/distccd.service.conf"
+
+	cp "${FILESDIR}/3.2/conf" "${T}/distccd" || die
+	if use zeroconf; then
+		cat >> "${T}/distccd" <<-EOF || die
+
+		# Enable zeroconf support in distccd
+		DISTCCD_OPTS="\${DISTCCD_OPTS} --zeroconf"
+		EOF
+
+		sed -i '/ExecStart/ s|$| --zeroconf|' "${D}$(systemd_get_systemunitdir)"/distccd.service || die
+	fi
+	doconfd "${T}/distccd" || die
+
+	cat > "${T}/02distcc" <<-EOF || die
+	# This file is managed by distcc-config; use it to change these settings.
+	# DISTCC_LOG and DISTCC_DIR should not be set.
+	DISTCC_VERBOSE="${DISTCC_VERBOSE:-0}"
+	DISTCC_FALLBACK="${DISTCC_FALLBACK:-1}"
+	DISTCC_SAVE_TEMPS="${DISTCC_SAVE_TEMPS:-0}"
+	DISTCC_TCP_CORK="${DISTCC_TCP_CORK}"
+	DISTCC_SSH="${DISTCC_SSH}"
+	UNCACHED_ERR_FD="${UNCACHED_ERR_FD}"
+	DISTCC_ENABLE_DISCREPANCY_EMAIL="${DISTCC_ENABLE_DISCREPANCY_EMAIL}"
+	DCC_EMAILLOG_WHOM_TO_BLAME="${DCC_EMAILLOG_WHOM_TO_BLAME}"
+	EOF
+	doenvd "${T}/02distcc" || die
+
+	keepdir "${DCCC_PATH}" || die
+
+	dobin "${T}/distcc-config" || die
+
+	if use gnome || use gtk; then
+		einfo "Renaming /usr/bin/distccmon-gnome to /usr/bin/distccmon-gui"
+		einfo "This is to have a little sensability in naming schemes between distccmon programs"
+		mv "${ED}/usr/bin/distccmon-gnome" "${ED}/usr/bin/distccmon-gui" || die
+		dosym distccmon-gui /usr/bin/distccmon-gnome || die
+	fi
+
+	if use xinetd; then
+		insinto /etc/xinetd.d || die
+		newins "doc/example/xinetd" distcc || die
+	fi
+
+	rm -r "${ED}/etc/default" || die
+	rm "${ED}/etc/distcc/clients.allow" || die
+	rm "${ED}/etc/distcc/commands.allow.sh" || die
+}
+
+pkg_postinst() {
+	if [ -x "${EPREFIX}/usr/bin/distcc-config" ] ; then
+		if use crossdev; then
+			"${EPREFIX}/usr/bin/distcc-config" --update-masquerade-with-crossdev
+		else
+			"${EPREFIX}/usr/bin/distcc-config" --update-masquerade
+		fi
+	fi
+
+	use gnome && xdg_desktop_database_update
+
+	elog
+	elog "Tips on using distcc with Gentoo can be found at"
+	elog "https://wiki.gentoo.org/wiki/Distcc"
+	elog
+	elog "How to use pump mode with Gentoo:"
+	elog "# distcc-config --set-hosts \"foo,cpp,lzo bar,cpp,lzo baz,cpp,lzo\""
+	elog "# echo 'FEATURES=\"\${FEATURES} distcc distcc-pump\"' >> /etc/portage/make.conf"
+	elog "# emerge -u world"
+	elog
+	elog "To use the distccmon programs with Gentoo you should use this command:"
+	elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-text 5"
+
+	if use gnome || use gtk; then
+		elog "Or:"
+		elog "# DISTCC_DIR=\"${DISTCC_DIR:-${BUILD_PREFIX}/.distcc}\" distccmon-gnome"
+	fi
+
+	elog
+	elog "***SECURITY NOTICE***"
+	elog "If you are upgrading distcc please make sure to run etc-update to"
+	elog "update your /etc/conf.d/distccd and /etc/init.d/distccd files with"
+	elog "added security precautions (the --listen and --allow directives)"
+	elog
+}
+
+pkg_postrm() {
+	# delete the masquerade directory
+	if [ ! -f "${EPREFIX}/usr/bin/distcc" ] ; then
+		einfo "Remove masquerade symbolic links."
+		rm "${EPREFIX}${DCCC_PATH}/"*{cc,c++,gcc,g++}
+		rmdir "${EPREFIX}${DCCC_PATH}"
+	fi
+
+	use gnome && xdg_desktop_database_update
+}
-- 
2.14.1