* [gentoo-dev] newsitem: udev-init-script changes (second draft)
@ 2015-05-29 19:50 William Hubbs
2015-05-31 11:04 ` Alexis Ballier
2015-06-01 2:28 ` Anthony G. Basile
0 siblings, 2 replies; 4+ messages in thread
From: William Hubbs @ 2015-05-29 19:50 UTC (permalink / raw
To: gentoo development
[-- Attachment #1.1: Type: text/plain, Size: 138 bytes --]
All,
here is the second version of this news item; there are more changes I
think I should mention, so they are in this draft.
William
[-- Attachment #1.2: 2015-06-01-udev-init-scripts-changes.en.txt --]
[-- Type: text/plain, Size: 852 bytes --]
Title: udev-init-scripts-28 important changes
Author: William Hubbs <williamh@gentoo.org>
Content-Type: text/plain
Posted: 2015-06-01
Revision: 1
News-Item-Format: 1.0
Display-If-Installed: <=sys-fs/udev-init-scripts-28
In udev-init-scripts-28 and newer, the udev service script has been
split into udev, udev-settle and udev-trigger.
This means the settings in /etc/conf.d/udev have also been migrated
to the appropriate /etc/conf.d files, so be careful when you update your
configuration settings.
It is also important that you add udev-trigger to the sysinit runlevel.
This is done by issuing the following command:
# rc-update add udev-trigger sysinit
Udev-settle should not be added to any runlevels since it should not be
needed most of the time. If another service needs it, this service
should add "need udev-settle" to its dependencies.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-dev] newsitem: udev-init-script changes (second draft)
2015-05-29 19:50 [gentoo-dev] newsitem: udev-init-script changes (second draft) William Hubbs
@ 2015-05-31 11:04 ` Alexis Ballier
2015-06-01 2:28 ` Anthony G. Basile
1 sibling, 0 replies; 4+ messages in thread
From: Alexis Ballier @ 2015-05-31 11:04 UTC (permalink / raw
To: William Hubbs; +Cc: gentoo development
On Fri, 29 May 2015 14:50:31 -0500
William Hubbs <williamh@gentoo.org> wrote:
[...]
> First, there is now a udev-trigger init script which you will need to
> add to the sysinit runlevel. You do this by issuing the following
> command:
>
> # rc-update add udev-trigger sysinit
Unrelated to the news items, but is there any case when one would not
want to do this ?
[...]
> Display-If-Installed: <=sys-fs/udev-init-scripts-28
[...]
> The second change is that, from this point forward, the init scripts
> will not be automatically added to the sysinit runlevel.
This sounds like something that is of much higher importance when
*not* upgrading from older versions, yet this wont be displayed for new
installs it seems.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-dev] newsitem: udev-init-script changes (second draft)
2015-05-29 19:50 [gentoo-dev] newsitem: udev-init-script changes (second draft) William Hubbs
2015-05-31 11:04 ` Alexis Ballier
@ 2015-06-01 2:28 ` Anthony G. Basile
2015-06-03 14:22 ` William Hubbs
1 sibling, 1 reply; 4+ messages in thread
From: Anthony G. Basile @ 2015-06-01 2:28 UTC (permalink / raw
To: gentoo-dev
On 05/29/15 15:50, William Hubbs wrote:
> All,
>
> here is the second version of this news item; there are more changes I
> think I should mention, so they are in this draft.
>
> William
>
sys-fs/udev-init-scripts-28 is not on the tree yet. i'd like to test
this with both eudev and with the embedded stages that i do. can i use
-9999 or will you put -28 on the tree before this news item goes out.
while i think i get what you're up to, i'd like to see it first hand.
--
Anthony G. Basile, Ph. D.
Chair of Information Technology
D'Youville College
Buffalo, NY 14201
(716) 829-8197
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-dev] newsitem: udev-init-script changes (second draft)
2015-06-01 2:28 ` Anthony G. Basile
@ 2015-06-03 14:22 ` William Hubbs
0 siblings, 0 replies; 4+ messages in thread
From: William Hubbs @ 2015-06-03 14:22 UTC (permalink / raw
To: gentoo-dev
[-- Attachment #1.1: Type: text/plain, Size: 116 bytes --]
All,
here is the latest version of this news item. It will be submitted on 5
Jun if there is no feedback.
William
[-- Attachment #1.2: 2015-06-05-udev-init-scripts-changes.en.txt --]
[-- Type: text/plain, Size: 722 bytes --]
Title: udev-init-scripts-28 important changes
Author: William Hubbs <williamh@gentoo.org>
Content-Type: text/plain
Posted: 2015-06-05
Revision: 1
News-Item-Format: 1.0
Display-If-Installed: <=sys-fs/udev-init-scripts-28
In udev-init-scripts-28 and newer, the udev service script has been
split into udev, udev-settle and udev-trigger.
This means the settings in /etc/conf.d/udev have also been migrated
to the appropriate /etc/conf.d files, so be careful when you update your
configuration settings.
udev and udev-trigger will be added to your sysinit runlevel, but not
udev-settle. udev-settle should not be added to a runlevel. Instead, if
a service needs this, it should add "need udev-settle" to its
dependencies.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-06-03 14:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-05-29 19:50 [gentoo-dev] newsitem: udev-init-script changes (second draft) William Hubbs
2015-05-31 11:04 ` Alexis Ballier
2015-06-01 2:28 ` Anthony G. Basile
2015-06-03 14:22 ` William Hubbs
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox