From: "Steven J. Long" <slong@rathaus.eclipse.co.uk>
To: gentoo-dev@lists.gentoo.org
Subject: [gentoo-dev] Re: Re: crossdev and multilib interference
Date: Fri, 1 Aug 2014 19:17:32 +0100 [thread overview]
Message-ID: <20140801181732.GA2508@rathaus.eclipse.co.uk> (raw)
In-Reply-To: <53DBA5E0.9060809@gentoo.org>
On Fri, Aug 01, 2014 at 10:36AM, Ian Stakenvicius wrote:
> On 01/08/14 05:05 AM, Steven J. Long wrote:
> > I don't know why we can't just mask cross-*/whatever in the
> > multilib profile, instead of more talk of "masking crossdev" with a
> > heavy heart.
> >
> > Nor do know if that's been done already, as I just found that the
> > profiles directory Changelog stopped in 2013, for some reason, and
> > I don't have time to chase the files right now.
> >
> > Sorry for delay, been away and then busy. I was hoping to read
> > something more than "mask crossdev" yet again, when I got back.
> >
> Back to the comment on masking -- would a cross-emerge (which i think
> uses the target's profile, right?) end up p.masking its own toolchain?
No. The cross-* part is an overlay on CBUILD (ie the machine building the
software; for a native build this is the same as CHOST in make.conf.)
> I agree that masks should be minimized, at most
> masking the conflicting cross-* packages in a profile. However if
> this causes issues within cross-emerge too, then perhaps adjusting the
> crossdev tool to warn or error would suffice when a target that will
> conflict with the native toolchain is requested.
Well that should happen too: it's a trivial patch, which again has
already been discussed in #-embedded. Either vapier gets on and does
it now he's back, or someone else will, for an arch they care about. I
can't see him caring if it's correct; and after all the mask on the
"overlay" itself (which is on CBUILD, remember) is only possible due
to the separation inherent in the crossdev design.
Nowadays people like to call that "belt'n'braces" or something. When I
learnt to code it was called "common-sense." Discussing it wouldn't
even arise: it goes without saying.
Regards,
igli.
--
#friendly-coders -- We're friendly, but we're not /that/ friendly ;-)
next prev parent reply other threads:[~2014-08-01 17:51 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-12 15:46 [gentoo-dev] crossdev and multilib interference hasufell
2014-03-12 16:06 ` Alexandre Rostovtsev
2014-03-12 18:56 ` Alexis Ballier
2014-03-16 11:50 ` Greg Turner
2014-03-26 6:07 ` Mike Frysinger
2014-03-26 12:25 ` [gentoo-dev] " Steven J. Long
2014-03-26 16:12 ` Mike Frysinger
2014-03-26 16:23 ` Ian Stakenvicius
2014-03-27 2:41 ` Mike Frysinger
2014-03-27 4:41 ` Alexandre Rostovtsev
2014-03-27 6:07 ` Mike Frysinger
2014-03-27 6:31 ` Alexandre Rostovtsev
2014-03-27 6:41 ` Mike Frysinger
2014-03-27 6:51 ` Michał Górny
2014-03-27 7:23 ` Mike Frysinger
2014-03-27 6:58 ` Samuli Suominen
2014-03-27 8:41 ` [gentoo-dev] " Steven J. Long
2014-03-28 6:36 ` Mike Frysinger
2014-03-30 9:53 ` [gentoo-dev] " Steven J. Long
2014-06-15 20:35 ` hasufell
2014-06-15 20:43 ` Chí-Thanh Christopher Nguyễn
2014-06-16 13:37 ` hasufell
2014-06-16 18:42 ` Steev Klimaszewski
2014-06-16 19:31 ` hasufell
2014-06-16 19:42 ` Jeroen Roovers
2014-06-16 19:47 ` hasufell
2014-06-16 20:05 ` Joshua Kinard
2014-06-16 20:24 ` hasufell
2014-06-16 20:59 ` Joshua Kinard
2014-06-16 22:10 ` hasufell
2014-06-16 23:38 ` Joshua Kinard
2014-06-17 1:47 ` hasufell
2014-06-17 2:17 ` Joshua Kinard
2014-06-17 12:30 ` hasufell
2014-06-17 12:49 ` Rich Freeman
2014-06-17 13:53 ` hasufell
2014-06-17 14:17 ` Joshua Kinard
2014-06-17 14:56 ` Alexandre Rostovtsev
2014-06-17 15:10 ` Michał Górny
2014-06-18 15:24 ` Peter Stuge
2014-06-19 7:58 ` Michał Górny
2014-06-17 15:20 ` Joshua Kinard
2014-06-18 5:08 ` Alexandre Rostovtsev
2014-06-18 6:24 ` Joshua Kinard
2014-06-18 14:18 ` Ian Stakenvicius
2014-06-19 21:20 ` [gentoo-dev] " Steven J. Long
2014-06-20 20:10 ` [gentoo-dev] " Ian Stakenvicius
2014-06-21 10:31 ` Greg Turner
2014-06-21 20:47 ` Michał Górny
2014-08-01 9:05 ` Steven J. Long
2014-08-01 14:36 ` Ian Stakenvicius
2014-08-01 18:17 ` Steven J. Long [this message]
2014-06-18 4:29 ` Ryan Hill
2014-06-17 14:04 ` [gentoo-dev] Re: " Joshua Kinard
2014-06-17 14:38 ` hasufell
2014-06-17 15:02 ` Joshua Kinard
2014-06-17 15:18 ` hasufell
2014-06-17 15:37 ` hasufell
2014-06-17 12:48 ` hasufell
2014-06-17 14:31 ` Joshua Kinard
2014-06-17 13:25 ` Ian Stakenvicius
2014-06-17 14:22 ` Michał Górny
2014-06-17 14:34 ` Joshua Kinard
2014-06-16 23:25 ` Patrick Lauer
2014-06-16 20:27 ` Ian Stakenvicius
2014-06-16 21:42 ` [gentoo-dev] " Jeroen Roovers
2014-06-17 0:03 ` Joshua Kinard
2014-06-16 20:25 ` [gentoo-dev] Re: Re: " hasufell
2014-06-16 2:24 ` [gentoo-dev] " Ryan Hill
2014-06-16 13:27 ` hasufell
2014-06-17 4:52 ` Ryan Hill
2014-06-17 12:29 ` hasufell
2014-03-29 1:21 ` [gentoo-dev] " Maciej Mrozowski
2014-03-16 12:01 ` Greg Turner
2014-03-13 8:55 ` Michał Górny
2014-03-13 12:20 ` Alexandre Rostovtsev
2014-03-26 5:17 ` Mike Frysinger
2014-03-27 6:13 ` Mike Frysinger
2014-03-27 6:51 ` Michał Górny
2014-03-27 7:18 ` Mike Frysinger
2014-03-27 9:10 ` Michał Górny
2014-03-27 14:23 ` Mike Frysinger
2014-03-27 14:31 ` Michał Górny
2014-03-28 6:33 ` Mike Frysinger
2014-03-29 21:39 ` Michał Górny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140801181732.GA2508@rathaus.eclipse.co.uk \
--to=slong@rathaus.eclipse.co.uk \
--cc=gentoo-dev@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox