From: Mike Frysinger <vapier@gentoo.org>
To: gentoo-dev@lists.gentoo.org
Cc: "Sven Köhler" <skoehler@upb.de>
Subject: Re: [gentoo-dev] Re: bootstrapping since gcc 3.4 is stable
Date: Thu, 26 Jan 2006 19:16:21 -0500 [thread overview]
Message-ID: <200601261916.21375.vapier@gentoo.org> (raw)
In-Reply-To: <43D913BD.2090505@upb.de>
On Thursday 26 January 2006 13:23, Sven Köhler wrote:
> You say, that it's the intended behaviour, that bootstrap.sh keeps the
> crippled gcc 3.3 intact and as the default compiler.
ok, i looked into this some more and ran some tests ...
long and short of it is that the behavior i discussed before applies only in a
stage3 and beyond ... the gcc-config logic is specifically tweaked during
bootstrap and build (i.e. stage1 and stage2), thus everything i said wrt to
automatic switching of gcc has no bearing on this discussion
ive chatted with wolf and the real fix here is to change the 'emerge clean' at
the end of bootstrap.sh into an 'emerge prune sys-devel/gcc' ... that way
when you emerge a new SLOT-ed version of gcc, the old stripped down version
in stage1 is automatically pruned
-mike
--
gentoo-dev@gentoo.org mailing list
next prev parent reply other threads:[~2006-01-27 0:27 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-25 12:30 [gentoo-dev] bootstrapping since gcc 3.4 is stable Sven Köhler
2006-01-25 13:23 ` Mike Frysinger
2006-01-25 16:23 ` Sven Köhler
2006-01-25 16:38 ` Marius Mauch
2006-01-25 18:12 ` Mikey
2006-01-25 21:11 ` [gentoo-dev] " Sven Köhler
2006-01-25 18:28 ` [gentoo-dev] " Mike Frysinger
2006-01-25 20:44 ` Sven Köhler
2006-01-25 21:17 ` Mike Frysinger
2006-01-25 22:27 ` [gentoo-dev] " Sven Köhler
2006-01-25 22:42 ` Jan Kundrát
2006-01-25 22:49 ` [gentoo-dev] " MIkey
2006-01-25 23:08 ` Jan Kundrát
2006-01-26 0:02 ` [gentoo-dev] " MIkey
2006-01-26 0:27 ` Chris Gianelloni
2006-01-26 1:00 ` Mikey
2006-01-26 1:13 ` Stephen P. Becker
2006-01-26 1:32 ` Mikey
2006-01-26 1:35 ` Dan Meltzer
2006-01-26 1:49 ` Stephen P. Becker
2006-01-26 2:23 ` Mikey
2006-01-26 2:53 ` Donnie Berkholz
2006-01-26 3:07 ` Mikey
2006-01-26 10:37 ` Marcelo Góes
2006-01-26 14:16 ` Mike Frysinger
2006-01-26 15:42 ` Mikey
2006-01-26 15:53 ` Mike Frysinger
2006-01-26 16:06 ` [gentoo-dev] " MIkey
2006-01-26 18:50 ` Mike Frysinger
2006-01-26 19:00 ` [gentoo-dev] " MIkey
2006-01-26 19:08 ` Mike Frysinger
2006-01-27 0:16 ` Mike Frysinger
2006-01-26 3:09 ` [gentoo-dev] " Marcelo Góes
2006-01-26 12:08 ` Stephen P. Becker
2006-01-26 21:46 ` [gentoo-dev] " MIkey
2006-01-26 22:02 ` Jan Kundrát
2006-01-26 22:07 ` [gentoo-dev] " MIkey
2006-01-27 8:26 ` Paul de Vrieze
2006-01-26 14:06 ` [gentoo-dev] " Chris Gianelloni
2006-01-26 15:02 ` Mikey
2006-01-26 15:10 ` [gentoo-dev] " Dan Meltzer
2006-01-26 15:39 ` [gentoo-dev] Re: " Mikey
2006-01-26 14:02 ` Chris Gianelloni
2006-01-26 15:34 ` Mikey
2006-01-26 16:15 ` Wernfried Haas
2006-01-26 16:27 ` Dale
2006-01-26 16:43 ` [gentoo-dev] " MIkey
2006-01-26 16:54 ` Pete Ezzo
2006-01-26 16:42 ` MIkey
2006-01-26 17:08 ` Alec Warner
2006-01-26 17:30 ` [gentoo-dev] " MIkey
2006-01-27 8:42 ` Paul de Vrieze
2006-01-27 15:08 ` [gentoo-dev] " MIkey
2006-01-27 15:48 ` Paul de Vrieze
2006-01-26 17:08 ` [gentoo-dev] " Wernfried Haas
2006-01-26 17:47 ` [gentoo-dev] " MIkey
2006-01-27 10:11 ` Paul de Vrieze
2006-01-26 16:16 ` [gentoo-dev] " Paul de Vrieze
2006-01-26 18:48 ` Mike Frysinger
2006-01-27 8:30 ` Paul de Vrieze
2006-01-26 2:40 ` [gentoo-dev] " Sven Köhler
2006-01-26 3:02 ` Mike Frysinger
2006-01-26 3:06 ` Mikey
2006-01-26 6:14 ` Homer Parker
2006-01-26 14:59 ` Mikey
2006-01-26 11:17 ` Paul de Vrieze
2006-01-26 13:54 ` Sven Köhler
2006-01-26 14:11 ` Mike Frysinger
2006-01-26 18:23 ` Sven Köhler
2006-01-26 18:44 ` Mike Frysinger
2006-01-27 0:16 ` Mike Frysinger [this message]
2006-01-30 1:37 ` Sven Köhler
2006-01-30 1:39 ` Mike Frysinger
2006-01-30 1:50 ` Sven Köhler
2006-01-30 1:54 ` Mike Frysinger
2006-01-26 14:57 ` Chris Gianelloni
2006-01-26 15:51 ` Paul de Vrieze
2006-01-26 16:17 ` [gentoo-dev] " MIkey
2006-01-26 16:36 ` Wernfried Haas
2006-01-26 17:17 ` [gentoo-dev] " MIkey
2006-01-27 10:18 ` [gentoo-dev] " Paul de Vrieze
2006-01-27 14:32 ` [gentoo-dev] " MIkey
2006-01-27 14:40 ` Paul de Vrieze
2006-01-27 15:32 ` [gentoo-dev] " MIkey
2006-01-28 14:56 ` Paul de Vrieze
2006-01-28 17:20 ` [gentoo-dev] " MIkey
2006-01-28 18:06 ` MIkey
2006-01-28 18:39 ` Stephen P. Becker
2006-01-29 3:45 ` Mikey
2006-01-26 14:12 ` [gentoo-dev] " Chris Gianelloni
2006-01-26 15:40 ` Mikey
2006-01-26 16:00 ` Paul de Vrieze
[not found] ` <43D8FA31.2030300@gentoo.org>
2006-01-26 17:15 ` [gentoo-dev] " MIkey
2006-01-26 17:40 ` Jan Kundrát
2006-01-26 17:52 ` [gentoo-dev] " MIkey
2006-01-26 18:13 ` Jan Kundrát
2006-01-26 18:20 ` [gentoo-dev] " MIkey
2006-01-26 21:53 ` Jan Kundrát
2006-01-26 22:02 ` [gentoo-dev] " MIkey
2006-01-26 22:43 ` Jan Kundrát
[not found] ` <200601262257.k0QMvbg4016753@gw.open-hosting.net>
2006-01-27 4:13 ` [gentoo-dev] " Paul Varner
2006-01-26 22:45 ` [gentoo-dev] Re: Re: Re: Re: " Jakub Moc
2006-01-25 22:54 ` [gentoo-dev] " Chris Gianelloni
2006-01-25 13:56 ` [gentoo-dev] " Chris Gianelloni
2006-01-25 21:09 ` [gentoo-dev] " Sven Köhler
2006-01-25 21:52 ` Chris Gianelloni
2006-01-25 22:31 ` [gentoo-dev] " MIkey
2006-01-25 22:58 ` Chris Gianelloni
2006-01-25 23:50 ` [gentoo-dev] " MIkey
2006-01-26 0:20 ` Chris Gianelloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200601261916.21375.vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=gentoo-dev@lists.gentoo.org \
--cc=skoehler@upb.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox