Re: [Re: [gentoo-dev] Again evolution13 (was:Gconf1.04 and evolution)]

Re: [Re: [gentoo-dev] Again evolution13 (was:Gconf1.04 and evolution)]

[Viktor Lakics]

Yes, I installed gnome when I installed RC5 (using binaries, emerge --usepkg).
But even if I wouldn't, shouldn't emerge take care of these dependencies? (if
gnome is a dependency for evolution, as it is)

Viktor

Martin Schlemmer <azarah@saintmail.net> wrote:
> On Sun, 2001-09-23 at 11:19, Viktor Lakics wrote:
> 
> > checking for scrollkeeper-config... no
> > configure: error: Couldn't find scrollkeeper-config
> > 
> > !!! ERROR: the ./configure command did not complete successfully.
> > !!! ("./configure --prefix=/opt/gnome --host=i686-pc-linux-gnu
--sysconfdir=/etc/opt/gnome --enable-file-locking=no
--with-db3=/tmp/portage/evolution-0.13/work/db3 --without-movemail
--enable-nntp --enable-ssl")
> > !!! Since this is a critical task, ebuild will be stopped.
> > 
> > !!! emerge aborting on 
/usr/portage/gnome-apps/evolution/evolution-0.13.ebuild .
> > ........................
> > 
> > Any idea on this?
> > 
> > Some other questions just for me to know what I am doing:
> > 
> > 1. What is nls and what does it do?
> > 
> 
> emerge gnome-base/scrollkeeper
> 
> did you merge gnome ? (emerge gnome-base/gnome)
> 
> greets
> MS
> 
> 
> _______________________________________________
> gentoo-dev mailing list
> gentoo-dev@cvs.gentoo.org
> http://cvs.gentoo.org/mailman/listinfo/gentoo-dev


----Viktor Lakics----

Through the Internet:

  lakicsv@usa.net


____________________________________________________________________
Get free email and a permanent address at http://www.amexmail.com/?A=1

Re: [Re: [gentoo-dev] Again evolution13 (was:Gconf1.04 and evolution)]

[Viktor Lakics]

Yes, I installed gnome when I installed RC5 (using binaries, emerge --usepkg).
But even if I wouldn't, shouldn't emerge take care of these dependencies? (if
gnome is a dependency for evolution, as it is)

Viktor

Martin Schlemmer <azarah@saintmail.net> wrote:
> On Sun, 2001-09-23 at 11:19, Viktor Lakics wrote:
> 
> > checking for scrollkeeper-config... no
> > configure: error: Couldn't find scrollkeeper-config
> > 
> > !!! ERROR: the ./configure command did not complete successfully.
> > !!! ("./configure --prefix=/opt/gnome --host=i686-pc-linux-gnu
--sysconfdir=/etc/opt/gnome --enable-file-locking=no
--with-db3=/tmp/portage/evolution-0.13/work/db3 --without-movemail
--enable-nntp --enable-ssl")
> > !!! Since this is a critical task, ebuild will be stopped.
> > 
> > !!! emerge aborting on 
/usr/portage/gnome-apps/evolution/evolution-0.13.ebuild .
> > ........................
> > 
> > Any idea on this?
> > 
> > Some other questions just for me to know what I am doing:
> > 
> > 1. What is nls and what does it do?
> > 
> 
> emerge gnome-base/scrollkeeper
> 
> did you merge gnome ? (emerge gnome-base/gnome)
> 
> greets
> MS
> 
> 
> _______________________________________________
> gentoo-dev mailing list
> gentoo-dev@cvs.gentoo.org
> http://cvs.gentoo.org/mailman/listinfo/gentoo-dev


----Viktor Lakics----

Through the Internet:

  lakicsv@usa.net


____________________________________________________________________
Get free email and a permanent address at http://www.amexmail.com/?A=1

Re: [Re: [gentoo-dev] Again evolution13 (was:Gconf1.04 and evolution)]

[Mikael Hallendal]

sön 2001-09-23 klockan 20.10 skrev Viktor Lakics:
> Yes, I installed gnome when I installed RC5 (using binaries, emerge --usepkg).
> But even if I wouldn't, shouldn't emerge take care of these dependencies? (if
> gnome is a dependency for evolution, as it is)

Yes, Scrollkeeper should be in the dependencies of Evolution. I've
updated the ebuild. Let me know if you have other problems.

Regards,
  Mikael Hallendal
 
> Viktor
> 
> Martin Schlemmer <azarah@saintmail.net> wrote:
> > On Sun, 2001-09-23 at 11:19, Viktor Lakics wrote:
> > 
> > > checking for scrollkeeper-config... no
> > > configure: error: Couldn't find scrollkeeper-config
> > > 
> > > !!! ERROR: the ./configure command did not complete successfully.
> > > !!! ("./configure --prefix=/opt/gnome --host=i686-pc-linux-gnu
> --sysconfdir=/etc/opt/gnome --enable-file-locking=no
> --with-db3=/tmp/portage/evolution-0.13/work/db3 --without-movemail
> --enable-nntp --enable-ssl")
> > > !!! Since this is a critical task, ebuild will be stopped.
> > > 
> > > !!! emerge aborting on 
> /usr/portage/gnome-apps/evolution/evolution-0.13.ebuild .
> > > ........................
> > > 
> > > Any idea on this?
> > > 
> > > Some other questions just for me to know what I am doing:
> > > 
> > > 1. What is nls and what does it do?
> > > 
> > 
> > emerge gnome-base/scrollkeeper
> > 
> > did you merge gnome ? (emerge gnome-base/gnome)
> > 
> > greets
> > MS
> > 
> > 
> > _______________________________________________
> > gentoo-dev mailing list
> > gentoo-dev@cvs.gentoo.org
> > http://cvs.gentoo.org/mailman/listinfo/gentoo-dev
> 
> 
> ----Viktor Lakics----
> 
> Through the Internet:
> 
>   lakicsv@usa.net
> 
> 
> ____________________________________________________________________
> Get free email and a permanent address at http://www.amexmail.com/?A=1
> 
> _______________________________________________
> gentoo-dev mailing list
> gentoo-dev@cvs.gentoo.org
> http://cvs.gentoo.org/mailman/listinfo/gentoo-dev
-- 
Mikael Hallendal                micke@codefactory.se
CodeFactory AB                  http://www.codefactory.se/
Office: +46 (0)8 587 583 05     Cell: +46 (0)709 718 918

Re: [Re: [gentoo-dev] Again evolution13 (was:Gconf1.04 and evolution)]

[Viktor Lakics]

Thanks, Mikael, Evolution0.13 installed succesfully.

-- Viktor 
On Mon, Sep 24, 2001 at 12:11:57PM +0200, Mikael Hallendal wrote:
> sön 2001-09-23 klockan 20.10 skrev Viktor Lakics:
> > Yes, I installed gnome when I installed RC5 (using binaries, emerge --usepkg).
> > But even if I wouldn't, shouldn't emerge take care of these dependencies? (if
> > gnome is a dependency for evolution, as it is)
> 
> Yes, Scrollkeeper should be in the dependencies of Evolution. I've
> updated the ebuild. Let me know if you have other problems.
> 
> Regards,
>   Mikael Hallendal

[gentoo-dev] Install problem with new box. help please.

[Wayne Ringling]

 I am working on setting up this new raid box and run into a problem.  I get
as far as the below msg in the boot process and it stalls.  Any ideas
greatly appreciated.

 ide: Assuming 33 Mhz system bus speed for pio modes, override with
idebus=xx
 VP_IDE: VIA vt8233 (rec 00) IDE UDMA100 controlleron pci00:11.1
  Ide0: BM-DMA at 0xd800 - 0xd807, Bios settings: hda:DMA, hdb:DMA
  Ide1: BM-DMA at 0xd808 - 0xd80F, Bios settings: hdc:pio, hdd:pio

 Hardware Specs:

 Supermicro MB P3TDDE with onboard raid 0+1
 2 X PIII 933
 1GB SDRAM
 1 20GB WesternDigital HD - Hanging on IDE0 as slave
 1 24X Slim CD - Hanging on IDE0 as master
 4 80GB WesternDigital HD - Hanging on IDE3 & IDE4 as master,slave X 2
 1 Onboard Nic - I think it's a Intel Pro 100
 1 Stealth 64 Pro 4meg vram

 I have the raid configured as the 4 80Gb's as Raid 0+1 thru the built-in
bios config.

 The 20GB is just as normal ide hd in bios.

Thanks

Wayne

Re: [gentoo-dev] Install problem with new box. help please.

[Daniel Robbins]

On Mon, Sep 24, 2001 at 04:59:02PM -0400, Wayne Ringling wrote:
> 
> 
>  I am working on setting up this new raid box and run into a problem.  I get
> as far as the below msg in the boot process and it stalls.  Any ideas
> greatly appreciated.
> 
>  ide: Assuming 33 Mhz system bus speed for pio modes, override with
> idebus=xx
>  VP_IDE: VIA vt8233 (rec 00) IDE UDMA100 controlleron pci00:11.1
>   Ide0: BM-DMA at 0xd800 - 0xd807, Bios settings: hda:DMA, hdb:DMA
>   Ide1: BM-DMA at 0xd808 - 0xd80F, Bios settings: hdc:pio, hdd:pio

I would say that this is a kernel bug.  Whether or not there's kernel support
for your particular RAID setup (my guess is loading the correct module after
boot would make it work), your kernel really *should* boot no matter what.

When we start using a newer kernel, the problem may go away.  Do you happen to
know what particular kernel feature you need enabled for Linux to recognize your
hardware RAID stuff?

Best Regards,

-- 
Daniel Robbins					<drobbins@gentoo.org>
Chief Architect/President			http://www.gentoo.org 
Gentoo Technologies, Inc.			

RE: [gentoo-dev] Install problem with new box. help please.

[Wayne Ringling]

>I would say that this is a kernel bug.  Whether or not there's kernel
support
>for your particular RAID setup (my guess is loading the correct module
after
>boot would make it work), your kernel really *should* boot no matter what.

>When we start using a newer kernel, the problem may go away.  Do you happen
to
>know what particular kernel feature you need enabled for Linux to recognize
your
>hardware RAID stuff?

I am pretty sure I need the following driver loaded.  Here's the link to the
driver on Promise's website.

http://support.promise.com/Linux/Default.htm

 This might help.

 Is there anyway to load a device driver during a new install?

Wayne