[gentoo-dev] DONT REBOOT YOUR MACHINES!!!!!!!

[gentoo-dev] DONT REBOOT YOUR MACHINES!!!!!!!

[Spundun Bhatt]

Well it wont lose any of your data or damage your hardware... it just
wont get your eth0 interface up! so you wont be able to read my mail :)

There seems to be a problem with the latest baselayout (bug #21376)

After rebooting the interface doesnt come up... its behaving weirdly.
The simple soulution is to roll back to the older baselayout.

emerge /usr/portage/sys-apps/baselayout/baselayout-1.8.6.7.ebuild
etc-update


Hope the good guys fix this soon or mask it.

phew!!! scary :)
Spundun



--
gentoo-dev@gentoo.org mailing list

Re: [gentoo-dev] DONT REBOOT YOUR MACHINES!!!!!!!

[Brandon Low]

Did you merge all config files (haven't looked at bug, just a knee-jerk
reaction)

--B

On Tue, 05/20/03 at 17:25:31 -0700, Spundun Bhatt wrote:
> Well it wont lose any of your data or damage your hardware... it just
> wont get your eth0 interface up! so you wont be able to read my mail :)
> 
> There seems to be a problem with the latest baselayout (bug #21376)
> 
> After rebooting the interface doesnt come up... its behaving weirdly.
> The simple soulution is to roll back to the older baselayout.
> 
> emerge /usr/portage/sys-apps/baselayout/baselayout-1.8.6.7.ebuild
> etc-update
> 
> 
> Hope the good guys fix this soon or mask it.
> 
> phew!!! scary :)
> Spundun
> 
> 
> 
> --
> gentoo-dev@gentoo.org mailing list

--
gentoo-dev@gentoo.org mailing list

[gentoo-dev] Re: [gentoo-user] Re: [gentoo-dev] DONT REBOOT YOUR MACHINES!!!!!!!

[Spundun Bhatt]

Yes.
Spundun
On Tue, 2003-05-20 at 17:35, Brandon Low wrote:
> Did you merge all config files (haven't looked at bug, just a knee-jerk
> reaction)
> 
> --B
> 
> On Tue, 05/20/03 at 17:25:31 -0700, Spundun Bhatt wrote:
> > Well it wont lose any of your data or damage your hardware... it just
> > wont get your eth0 interface up! so you wont be able to read my mail :)
> > 
> > There seems to be a problem with the latest baselayout (bug #21376)
> > 
> > After rebooting the interface doesnt come up... its behaving weirdly.
> > The simple soulution is to roll back to the older baselayout.
> > 
> > emerge /usr/portage/sys-apps/baselayout/baselayout-1.8.6.7.ebuild
> > etc-update
> > 
> > 
> > Hope the good guys fix this soon or mask it.
> > 
> > phew!!! scary :)
> > Spundun
> > 
> > 
> > 
> > --
> > gentoo-dev@gentoo.org mailing list
> 
> --
> gentoo-user@gentoo.org mailing list


--
gentoo-dev@gentoo.org mailing list

Re: [gentoo-dev] DONT REBOOT YOUR MACHINES!!!!!!!

[foser]

Again, this is a mailing-list for development discussion, not shout-outs
to your digital neighbours or general ebuild problems. Please keep this
list clean.

- foser

On Wed, 2003-05-21 at 02:25, Spundun Bhatt wrote:
> Well it wont lose any of your data or damage your hardware... it just
> wont get your eth0 interface up! so you wont be able to read my mail :)
> 
> There seems to be a problem with the latest baselayout (bug #21376)
> 
> After rebooting the interface doesnt come up... its behaving weirdly.
> The simple soulution is to roll back to the older baselayout.
> 
> emerge /usr/portage/sys-apps/baselayout/baselayout-1.8.6.7.ebuild
> etc-update
> 
> 
> Hope the good guys fix this soon or mask it.
> 
> phew!!! scary :)
> Spundun
> 
> 
> 
> --
> gentoo-dev@gentoo.org mailing list
> 


--
gentoo-dev@gentoo.org mailing list

Re: [gentoo-dev] DONT REBOOT YOUR MACHINES!!!!!!!

[Spundun Bhatt]

I am sorry ... I only recently subscribed.. and since I thought this is
the place where devs hang-out, also I was almost sure that most people
would have this problem so I thought you ppl might want this to be
brought to your attention immediately.. apparantly some machines are
running fine with this update... my apologies again.
Once again just to confirm... "no problems with ebuilds and portage
should be reported here" right?

Thank you for the wonderful system you ppl are maintaining.
Spundun

On Tue, 2003-05-20 at 17:35, foser wrote:
> Again, this is a mailing-list for development discussion, not shout-outs
> to your digital neighbours or general ebuild problems. Please keep this
> list clean.
> 
> - foser
> 
> On Wed, 2003-05-21 at 02:25, Spundun Bhatt wrote:
> > Well it wont lose any of your data or damage your hardware... it just
> > wont get your eth0 interface up! so you wont be able to read my mail :)
> > 
> > There seems to be a problem with the latest baselayout (bug #21376)
> > 
> > After rebooting the interface doesnt come up... its behaving weirdly.
> > The simple soulution is to roll back to the older baselayout.
> > 
> > emerge /usr/portage/sys-apps/baselayout/baselayout-1.8.6.7.ebuild
> > etc-update
> > 
> > 
> > Hope the good guys fix this soon or mask it.
> > 
> > phew!!! scary :)
> > Spundun
> > 
> > 
> > 
> > --
> > gentoo-dev@gentoo.org mailing list
> > 
> 
> 
> --
> gentoo-dev@gentoo.org mailing list


--
gentoo-dev@gentoo.org mailing list

Re: [gentoo-dev] DONT REBOOT YOUR MACHINES!!!!!!!

[Jon Portnoy]

Open bug on it assigned to Azarah, so we're all set there :)

We'd prefer to keep the problems on bugzilla so this list can be used to 
discuss development issues and answer Gentoo development-related 
questions.

On Tue, May 20, 2003 at 06:47:07PM -0700, Spundun Bhatt wrote:
> I am sorry ... I only recently subscribed.. and since I thought this is
> the place where devs hang-out, also I was almost sure that most people
> would have this problem so I thought you ppl might want this to be
> brought to your attention immediately.. apparantly some machines are
> running fine with this update... my apologies again.
> Once again just to confirm... "no problems with ebuilds and portage
> should be reported here" right?
> 
> Thank you for the wonderful system you ppl are maintaining.
> Spundun
> 
> On Tue, 2003-05-20 at 17:35, foser wrote:
> > Again, this is a mailing-list for development discussion, not shout-outs
> > to your digital neighbours or general ebuild problems. Please keep this
> > list clean.
> > 
> > - foser
> > 
> > On Wed, 2003-05-21 at 02:25, Spundun Bhatt wrote:
> > > Well it wont lose any of your data or damage your hardware... it just
> > > wont get your eth0 interface up! so you wont be able to read my mail :)
> > > 
> > > There seems to be a problem with the latest baselayout (bug #21376)
> > > 
> > > After rebooting the interface doesnt come up... its behaving weirdly.
> > > The simple soulution is to roll back to the older baselayout.
> > > 
> > > emerge /usr/portage/sys-apps/baselayout/baselayout-1.8.6.7.ebuild
> > > etc-update
> > > 
> > > 
> > > Hope the good guys fix this soon or mask it.
> > > 
> > > phew!!! scary :)
> > > Spundun
> > > 
> > > 
> > > 
> > > --
> > > gentoo-dev@gentoo.org mailing list
> > > 
> > 
> > 
> > --
> > gentoo-dev@gentoo.org mailing list
> 
> 
> --
> gentoo-dev@gentoo.org mailing list

-- 
Jon Portnoy
avenj/irc.freenode.net

--
gentoo-dev@gentoo.org mailing list

Re: [gentoo-dev] DONT REBOOT YOUR MACHINES!!!!!!!

[George Shapovalov]

Besides, the post to mailing lst while producing more noise is easier lost 
without the track record, and we use bugs.gentoo.org for keeping such 
records. Posting a bug to bugzilla ensures that it gets assigned to certain 
developer and gets taken care of in a timely manner. In this case, as Jon 
suggested, you can assign it directly to azarah@gentoo.org.
(but in general, if you are not sure whom to assign it to, please leave the 
corresponding field blank - this will ensure that it gets assigned to the 
right developer).

George


On Tuesday 20 May 2003 19:16, Jon Portnoy wrote:
> Open bug on it assigned to Azarah, so we're all set there :)
>
> We'd prefer to keep the problems on bugzilla so this list can be used to
> discuss development issues and answer Gentoo development-related
> questions.
>
> On Tue, May 20, 2003 at 06:47:07PM -0700, Spundun Bhatt wrote:
> > I am sorry ... I only recently subscribed.. and since I thought this is
> > the place where devs hang-out, also I was almost sure that most people
>



--
gentoo-dev@gentoo.org mailing list