Alright, well, this:

cat /proc/pci | grep "usb"

Returns bupkiss, but should the usb be mentioned
in /proc/pci? It's on the motherboard so shouldn't it
not be in there anyway, or is "pci" misleading in that
it means all devices?

(Last time I bug you, promise.) =)

On Mon, 2002-12-09 at 12:52, Tom Prado wrote:

    On 9 Dec 2002, Adam Voigt wrote:
    
    > dmesg | grep "usb" 
    > 
    > Produces:
    > 
    > usb.c: registered new driver usbdevfs
    > usb.c: registered new driver hub
    > init_module: prism2_usb.o: 0.1.16-pre7 Loaded
    > init_module: dev_info is: prism2_usb
    > usb.c: registered new driver prism2_usb
    > 
    > And no, there is nothing in /proc/bus/usb.
    > 
    > Modprobing usb-uhci, uhci, or usb-ohci all throw error's and are
    not
    > inserted.
    > However, usb-core is loaded automatically when I modprobe the
    prism2
    > driver.
    
    hmm, that's not good that all the ?hci drivers return errors.  You
    don't 
    appear to have any USB bus drivers loaded.  See which USB adapter
    you have 
    by doing a cat /proc/pci (or use lspci) and look for the USB
    devices.
    
    I.e. mine are:
    
    00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev
    02)
    00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev
    02)
    00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev
    02)
    
    and dmesg | grep usb returns:
    
    usb-uhci.c: $Revision: 1.275 $ time 23:33:42 Dec  4 2002
    usb-uhci.c: High bandwidth mode enabled
    usb-uhci.c: USB UHCI at I/O 0xefe0, IRQ 11
    usb-uhci.c: Detected 2 ports
    
    You might want to check out
    http://www.linux-usb.org/USB-guide/book1.html 
    
    Best of luck,
    Tom
    
    
    --
    gentoo-dev@gentoo.org mailing list

    

-- 
Adam Voigt (adam@cryptocomm.com)
The Cryptocomm Group
My GPG Key: http://64.238.252.49:8080/adam_at_cryptocomm.asc