[gentoo-dev] new gentoo linux sources

[Robin Parker <rparker@ntlworld.com>]

[-- Attachment #1.1: Type: text/plain, Size: 471 bytes --]

Hi all,

I have tried to get this to work

First I tried switching on nearly all the new stuff, except the stuff I
obviously was never going to use.

X refused to start, all I got was a blank screen.

Then I tried using my 2.4.19 config with preempt and the low latency
scheduling.

Now my USB mouse refuses to work and I have 'funny' messages in my
startup.

I have attached the output of dmesg.

Can anyone help??

Many Thanks,

Robin







[-- Attachment #1.2: newkerneldmesg --]
[-- Type: text/plain, Size: 7790 bytes --]

Linux version 2.4.19-gentoo-r1 (root@preston) (gcc version 2.95.3 20010315 (release)) #1 Thu May 2 19:47:45 BST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=NewerKernel root=7201 devfs=mount
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1400.365 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2744.48 BogoMIPS
Memory: 514688k/524224k available (1516k kernel code, 9152k reserved, 412k data, 264k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU:             Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) processor stepping 04
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 89 & 1f -> 09
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbff0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc020, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12 (20020219) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 992 slots per queue, batch=248
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
    ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio
HPT370: IDE controller on PCI bus 00 dev 98
PCI: Found IRQ 11 for device 00:13.0
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
HPT370: using 33MHz PCI clock
    ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:DMA, hdf:DMA
    ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:pio, hdh:pio
hdc: CRD-8322B, ATAPI CD/DVD-ROM drive
hde: IC35L020AVER07-0, ATA DISK drive
hdf: IC35L020AVER07-0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xd800-0xd807,0xdc02 on irq 11
hde: 40188960 sectors (20577 MB) w/1916KiB Cache, CHS=39870/16/63, UDMA(44)
hdf: 40188960 sectors (20577 MB) w/1916KiB Cache, CHS=39870/16/63, UDMA(44)
hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host2/bus0/target0/lun0: [PTBL] [2501/255/63] p1 p2
 /dev/ide/host2/bus0/target1/lun0: unknown partition table
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
 ataraid/d0: p1 p2
Highpoint HPT370 Softwareraid driver for linux version 0.01
Drive 0 is 19623 Mb 
Drive 1 is 19623 Mb 
Raid array consists of 2 drives. 
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
reiserfs: checking transaction log (device 72:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 264k freed
Adding Swap: 1044216k swap-space (priority -1)
8139too Fast Ethernet driver 0.9.24
PCI: Found IRQ 10 for device 00:0d.0
PCI: Sharing IRQ 10 with 00:0f.0
eth0: RealTek RTL8139 Fast Ethernet at 0xcc00, 00:d0:70:01:a2:e8, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139C'
usb-uhci.c: $Revision: 1.275 $ time 19:51:16 May  2 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:07.2
PCI: Sharing IRQ 5 with 00:07.3
usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:07.3
PCI: Sharing IRQ 5 with 00:07.2
usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: USB new device connect on bus1/2, assigned device number 2
devfs_register(1): could not append to parent, err: -17
devfs_register(a1): could not append to parent, err: -17
devfs_register(1): could not append to parent, err: -17
devfs_register(a1): could not append to parent, err: -17
devfs_register(1): could not append to parent, err: -17
devfs_register(a1): could not append to parent, err: -17
usb-uhci.c: interrupt, status 3, frame# 544
hiddev0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb1:2.0
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
nvidia: loading NVIDIA NVdriver Kernel Module  1.0-2880  Tue Mar 26 08:12:38 PST 2002
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
NVRM: AGPGART: VIA Apollo KT133 chipset
NVRM: AGPGART: aperture: 64M @ 0xe8000000
NVRM: AGPGART: aperture mapped from 0xe8000000 to 0xe1a9a000
NVRM: AGPGART: mode 4x
NVRM: AGPGART: allocated 16 pages

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 232 bytes --]