[gentoo-dev] Gconf1.04 and evolution

[gentoo-dev] Gconf1.04 and evolution

[Viktor Lakics]

Dear Gentooers,

When trying to emerge evolution-0.13, emerge stops while configuring 
gconf1.04:
...................
creating tests/Makefile
creating standard-schemas/Makefile
creating gconf.pc
creating gconfgtk.pc
creating config.h
linking ./intl/libgettext.h to intl/libintl.h
configure: error: ./intl/libgettext.h: File not found

!!! ERROR: The ebuild did not complete successfully.
!!! Function src_compile, Line 9, Exitcode 1
!!! (no error message)

!!! emerge aborting on  /usr/portage/gnome-base/gconf/gconf-1.0.4.ebuild .

Yes, emerge is correct, there is no "/intl/libgettext.h" in that directory... 
Any solution to this?

TIA : Viktor (gentoo rc-5)

Re: [gentoo-dev] Gconf1.04 and evolution

[Mikael Hallendal]

s_ 2001-09-23 klockan 00.31 skrev Viktor Lakics:
> Dear Gentooers,

Hm,, are you trying to build without USE=nls?

This might be it, it's also on my TODO-list.

Regards,
  Mikael Hallendal
 
> When trying to emerge evolution-0.13, emerge stops while configuring 
> gconf1.04:
> ...................
> creating tests/Makefile
> creating standard-schemas/Makefile
> creating gconf.pc
> creating gconfgtk.pc
> creating config.h
> linking ./intl/libgettext.h to intl/libintl.h
> configure: error: ./intl/libgettext.h: File not found
> 
> !!! ERROR: The ebuild did not complete successfully.
> !!! Function src_compile, Line 9, Exitcode 1
> !!! (no error message)
> 
> !!! emerge aborting on  /usr/portage/gnome-base/gconf/gconf-1.0.4.ebuild .
> 
> Yes, emerge is correct, there is no "/intl/libgettext.h" in that directory... 
> Any solution to this?
> 
> TIA : Viktor (gentoo rc-5)
> 
> _______________________________________________
> gentoo-dev mailing list
> gentoo-dev@cvs.gentoo.org
> http://cvs.gentoo.org/mailman/listinfo/gentoo-dev
-- 
Mikael Hallendal                micke@codefactory.se
CodeFactory AB                  http://www.codefactory.se/
Office: +46 (0)8 587 583 05     Cell: +46 (0)709 718 918

[gentoo-dev] Again evolution13 (was:Gconf1.04 and evolution)

[Viktor Lakics]

Thanks Mikael,

After including nls as a USE variable, gconf1.04 merged as normal. However, evolution still causes me headaches. It dies while configuring:
............................
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... found
checking for scrollkeeper-config... no
configure: error: Couldn't find scrollkeeper-config

!!! ERROR: the ./configure command did not complete successfully.
!!! ("./configure --prefix=/opt/gnome --host=i686-pc-linux-gnu --sysconfdir=/etc/opt/gnome --enable-file-locking=no --with-db3=/tmp/portage/evolution-0.13/work/db3 --without-movemail --enable-nntp --enable-ssl")
!!! Since this is a critical task, ebuild will be stopped.

!!! emerge aborting on  /usr/portage/gnome-apps/evolution/evolution-0.13.ebuild .
........................

Any idea on this?

Some other questions just for me to know what I am doing:

1. What is nls and what does it do?

2. Is there a pilot or palm USE flag for evolution to be compiled with pilot      support?



On Sunday 23 September 2001 2:58 am, you wrote:
> s_ 2001-09-23 klockan 00.31 skrev Viktor Lakics:
> > Dear Gentooers,
>
> Hm,, are you trying to build without USE=nls?
>
> This might be it, it's also on my TODO-list.
>
> Regards,
>   Mikael Hallendal
>
> > When trying to emerge evolution-0.13, emerge stops while configuring
> > gconf1.04:
> > ...................
> > creating tests/Makefile
> > creating standard-schemas/Makefile
> > creating gconf.pc
> > creating gconfgtk.pc
> > creating config.h
> > linking ./intl/libgettext.h to intl/libintl.h
> > configure: error: ./intl/libgettext.h: File not found
> >
> > !!! ERROR: The ebuild did not complete successfully.
> > !!! Function src_compile, Line 9, Exitcode 1
> > !!! (no error message)
> >
> > !!! emerge aborting on  /usr/portage/gnome-base/gconf/gconf-1.0.4.ebuild
> > .
> >
> > Yes, emerge is correct, there is no "/intl/libgettext.h" in that
> > directory... Any solution to this?
> >
> > TIA : Viktor (gentoo rc-5)
> >
> > _______________________________________________
> > gentoo-dev mailing list
> > gentoo-dev@cvs.gentoo.org
> > http://cvs.gentoo.org/mailman/listinfo/gentoo-dev

Re: [gentoo-dev] Again evolution13 (was:Gconf1.04 and evolution)

[Martin Schlemmer]

On Sun, 2001-09-23 at 11:19, Viktor Lakics wrote:

> checking for scrollkeeper-config... no
> configure: error: Couldn't find scrollkeeper-config
> 
> !!! ERROR: the ./configure command did not complete successfully.
> !!! ("./configure --prefix=/opt/gnome --host=i686-pc-linux-gnu --sysconfdir=/etc/opt/gnome --enable-file-locking=no --with-db3=/tmp/portage/evolution-0.13/work/db3 --without-movemail --enable-nntp --enable-ssl")
> !!! Since this is a critical task, ebuild will be stopped.
> 
> !!! emerge aborting on  /usr/portage/gnome-apps/evolution/evolution-0.13.ebuild .
> ........................
> 
> Any idea on this?
> 
> Some other questions just for me to know what I am doing:
> 
> 1. What is nls and what does it do?
> 

emerge gnome-base/scrollkeeper

did you merge gnome ? (emerge gnome-base/gnome)

greets
MS

Re: [gentoo-dev] Again evolution13 (was:Gconf1.04 and evolution)

[Viktor Lakics]

Many Thanks, evolution is merged after installing scrollkeeper.

Viktor


n Sunday 23 September 2001 5:41 pm, you wrote:
> On Sun, 2001-09-23 at 11:19, Viktor Lakics wrote:
> > checking for scrollkeeper-config... no
> > configure: error: Couldn't find scrollkeeper-config
> >
> > !!! ERROR: the ./configure command did not complete successfully.
> > !!! ("./configure --prefix=/opt/gnome --host=i686-pc-linux-gnu
> > --sysconfdir=/etc/opt/gnome --enable-file-locking=no
> > --with-db3=/tmp/portage/evolution-0.13/work/db3 --without-movemail
> > --enable-nntp --enable-ssl") !!! Since this is a critical task, ebuild
> > will be stopped.
> >
> > !!! emerge aborting on 
> > /usr/portage/gnome-apps/evolution/evolution-0.13.ebuild .
> > ........................
> >
> > Any idea on this?
> >
> > Some other questions just for me to know what I am doing:
> >
> > 1. What is nls and what does it do?
>
> emerge gnome-base/scrollkeeper
>
> did you merge gnome ? (emerge gnome-base/gnome)
>
> greets
> MS
>
>
> _______________________________________________
> gentoo-dev mailing list
> gentoo-dev@cvs.gentoo.org
> http://cvs.gentoo.org/mailman/listinfo/gentoo-dev

Re: [gentoo-dev] Again evolution13 (was:Gconf1.04 and evolution)

[Mikael Hallendal]

s_ 2001-09-23 klockan 11.19 skrev Viktor Lakics:
> Thanks Mikael,
> 
> After including nls as a USE variable, gconf1.04 merged as normal. However, evolution still causes me headaches. It dies while configuring:
> ............................
> checking for working autoconf... found
> checking for working automake... found
> checking for working autoheader... found
> checking for working makeinfo... found
> checking for scrollkeeper-config... no
> configure: error: Couldn't find scrollkeeper-config
> 
> !!! ERROR: the ./configure command did not complete successfully.
> !!! ("./configure --prefix=/opt/gnome --host=i686-pc-linux-gnu --sysconfdir=/etc/opt/gnome --enable-file-locking=no --with-db3=/tmp/portage/evolution-0.13/work/db3 --without-movemail --enable-nntp --enable-ssl")
> !!! Since this is a critical task, ebuild will be stopped.
> 
> !!! emerge aborting on  /usr/portage/gnome-apps/evolution/evolution-0.13.ebuild .
> ........................
> 
> Any idea on this?

Hi!

This is probably my fault. It should be handled by portage but probably
it didn't know it needed Scrollkeeper because of a dependency problem.
I'll add it explicitly to the Evo ebuild. Sorry about this!

> Some other questions just for me to know what I am doing:
> 
> 1. What is nls and what does it do?

NLS stands for Native Language Support and includes translations. Many
GNOME packages won't build with this disables, not sure why really. Just
leave it enabled for now.

> 2. Is there a pilot or palm USE flag for evolution to be compiled with pilot      support?

There is a USE flag but it isn't used. I have this in my todo but
haven't been able to make it work yet (haven't spent too much time on it
to be honest).

I'll try to look into this soon.

Regards,
  Mikael Hallendal

-- 

Mikael Hallendal
Gentoo Linux Developer, Desktop Team Leader
CodeFactory AB, Stockholm, Sweden