[gentoo-desktop] unsubscribe

[gentoo-desktop] unsubscribe

[Hector Pizarro]

unsubscribe

Hector Pizarro
Amauta Technologies


-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Daniel da Veiga]

This is getting more and more annoying every day.
Why don't you people just READ the damn site on how to unsubscribe?
How were you able to even SUBSCRIBE it without reading?!

Sorry, but that's just repeating too much...

On 8/9/05, Hector Pizarro <hpizarro@amautatech.com> wrote:
> unsubscribe
> 
> Hector Pizarro
> Amauta Technologies
> 
> 
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 


-- 
Daniel da Veiga
Computer Operator - RS - Brazil
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V-
PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++
------END GEEK CODE BLOCK------

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Brian Hall]

I assume there's some kind of spam filter for this list already, so 
maybe a rule could be added to delete any email with "unsubscribe" in 
the subject or body?

On Wed, Aug 10, 2005 at 11:09:19AM -0300, Daniel da Veiga wrote:
> This is getting more and more annoying every day.
> Why don't you people just READ the damn site on how to unsubscribe?
> How were you able to even SUBSCRIBE it without reading?!
> 
> Sorry, but that's just repeating too much...
> 
> On 8/9/05, Hector Pizarro <hpizarro@amautatech.com> wrote:
> > unsubscribe
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Pete Theisen]

Brian Hall wrote:
> I assume there's some kind of spam filter for this list already, so 
> maybe a rule could be added to delete any email with "unsubscribe" in 
> the subject or body?

Hi Brian!

Great idea!

Set up a filter in your local email client to do that as well. If the 
one doesn't get it the other will.

Regards,

Pete
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[James Ashley]

But then how could we have all these delightful discussions about
"unsubscribe"?  I mean, that filter would get rid of this e-mail.

Then again, I suppose that's exactly what it deserves.  :-/

Brian Hall wrote:
> I assume there's some kind of spam filter for this list already, so
> maybe a rule could be added to delete any email with "unsubscribe" in
> the subject or body?

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] Unsubscribe

[Ricardo Santos]

On Tue, 2005-08-16 at 10:36 -0700, Adam Shelley wrote:
> Hello,
> 
> Not sure if this a great place to ask but I've been surfing all over the 
> net and it seems to be a common gentoo problem.
> 
> I'm attempting to install something that requires php.  When php 
> compiles i get an error:
> 
> "Sablotron version 0.96 or greater required".
> 
> sablot-config --version shows 1.0.1.  This seems to be sufficient to 
> satify the requirements but the configuration stage still fails for php.
> 
> I am not sure how to remedy this problem.
> 
> Any insight?
> 
> -Adam
> 

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Taka John Brunkhorst]

hmm???

On 8/17/05, Ricardo Santos <rs@isctem.com> wrote:
> On Tue, 2005-08-16 at 10:36 -0700, Adam Shelley wrote:
> > Hello,
> >
> > Not sure if this a great place to ask but I've been surfing all over the
> > net and it seems to be a common gentoo problem.
> >
> > I'm attempting to install something that requires php.  When php
> > compiles i get an error:
> >
> > "Sablotron version 0.96 or greater required".
> >
> > sablot-config --version shows 1.0.1.  This seems to be sufficient to
> > satify the requirements but the configuration stage still fails for php.
> >
> > I am not sure how to remedy this problem.
> >
> > Any insight?
> >
> > -Adam
> >
> 
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 


-- 
antiwmac@gmail.com
Taka John Brunkhorst

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Norberto Bensa]

[-- Attachment #1: Type: text/plain, Size: 314 bytes --]

Taka John Brunkhorst wrote:
> hmm???
>
> On 8/17/05, Ricardo Santos <rs@isctem.com> wrote:
> > On Tue, 2005-08-16 at 10:36 -0700, Adam Shelley wrote:
> > > Hello,

Okay... I'll setup a (local) filter for these morons :(


-- 
Norberto Bensa
4544-9692 / 15-4190-6344
Ciudad de Buenos Aires, Argentina

[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]

Re: [gentoo-desktop] Unsubscribe

[Willie Wong]

Wow! This is spectacular! Not only did he sent out the unsubscribe
mail the (most popular) wrong way, he also made the faux pas of
hijacking a thread! If only two wrongs can make a right q=

W

On Wed, Aug 17, 2005 at 09:57:25AM +0200, Ricardo Santos wrote:
> On Tue, 2005-08-16 at 10:36 -0700, Adam Shelley wrote:
> > Hello,
> > 
> > Not sure if this a great place to ask but I've been surfing all over the 
> > net and it seems to be a common gentoo problem.
> > 
> > I'm attempting to install something that requires php.  When php 
> > compiles i get an error:
> > 
> > "Sablotron version 0.96 or greater required".
> > 
> > sablot-config --version shows 1.0.1.  This seems to be sufficient to 
> > satify the requirements but the configuration stage still fails for php.
> > 
> > I am not sure how to remedy this problem.
> > 
> > Any insight?
> > 
> > -Adam
> > 
> 
> -- 
> gentoo-desktop@gentoo.org mailing list

-- 
If stretching were wealth, the cat would be rich.
    ~African Proverb
Sortir en Pantoufles: up 5 days, 20:26
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[John Manko]

** <http://www.allyourbasearebelongtous.com/>All your subscribes are 
belong to us.

Willie Wong wrote:

>Wow! This is spectacular! Not only did he sent out the unsubscribe
>mail the (most popular) wrong way, he also made the faux pas of
>hijacking a thread! If only two wrongs can make a right q=
>
>W
>
>On Wed, Aug 17, 2005 at 09:57:25AM +0200, Ricardo Santos wrote:
>  
>
>>On Tue, 2005-08-16 at 10:36 -0700, Adam Shelley wrote:
>>    
>>
>>>Hello,
>>>
>>>Not sure if this a great place to ask but I've been surfing all over the 
>>>net and it seems to be a common gentoo problem.
>>>
>>>I'm attempting to install something that requires php.  When php 
>>>compiles i get an error:
>>>
>>>"Sablotron version 0.96 or greater required".
>>>
>>>sablot-config --version shows 1.0.1.  This seems to be sufficient to 
>>>satify the requirements but the configuration stage still fails for php.
>>>
>>>I am not sure how to remedy this problem.
>>>
>>>Any insight?
>>>
>>>-Adam
>>>
>>>      
>>>
>>-- 
>>gentoo-desktop@gentoo.org mailing list
>>    
>>
>
>  
>
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 364 bytes --]

On Wed, 17 Aug 2005 13:24:31 -0400, Willie Wong wrote:

> Wow! This is spectacular! Not only did he sent out the unsubscribe
> mail the (most popular) wrong way, he also made the faux pas of
> hijacking a thread! If only two wrongs can make a right q=

At least he didn't top post or use HTML :)


-- 
Neil Bothwick

The geek shall inherit the earth.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-desktop] Unsubscribe

[Justin Denick]

[-- Attachment #1: Type: text/plain, Size: 640 bytes --]

Please excuse me for this question, but what is "top posting"

On 8/17/05, Neil Bothwick <neil@digimed.co.uk> wrote:
> 
> On Wed, 17 Aug 2005 13:24:31 -0400, Willie Wong wrote:
> 
> > Wow! This is spectacular! Not only did he sent out the unsubscribe
> > mail the (most popular) wrong way, he also made the faux pas of
> > hijacking a thread! If only two wrongs can make a right q=
> 
> At least he didn't top post or use HTML :)
> 
> 
> --
> Neil Bothwick
> 
> The geek shall inherit the earth.
> 
> 
> 


-- 
Got Gentoo?

It usually takes more than three weeks to prepare a good impromptu speech.
-- Mark Twain

[-- Attachment #2: Type: text/html, Size: 1053 bytes --]

Re: [gentoo-desktop] Unsubscribe

[Robert Muchacki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Justin Denick wrote:
> Please excuse me for this question, but what is "top posting"

You just did it :D

- --
Pozdrawiam,

Robert 'muchar' Muchacki
Gentoo Staff Member (http://dev.gentoo.org)
Gentoo Forums Moderator (http://forums.gentoo.org)
Gentoo Documentation Translator (http://tlumaczenia.gentoo.pl)
Koniecznie odwied? moj? stron?! http://muchar.one.pl

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDA4fCPdxsy5flg8gRAv7iAJ4xq+EXVOnNa6Y0zoSDDMmsmfX0sQCfY9x+
fi7L06aT8VCuu4qqj7sAuQY=
=Rviw
-----END PGP SIGNATURE-----
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Uwe Thiem]

On 17 August 2005 19:32, Justin Denick wrote:
> Please excuse me for this question, but what is "top posting"

It's what you are doing. Replying at the top of the email you are replying 
to. ;-)

Uwe

>
> On 8/17/05, Neil Bothwick <neil@digimed.co.uk> wrote:
> > On Wed, 17 Aug 2005 13:24:31 -0400, Willie Wong wrote:
> > > Wow! This is spectacular! Not only did he sent out the unsubscribe
> > > mail the (most popular) wrong way, he also made the faux pas of
> > > hijacking a thread! If only two wrongs can make a right q=
> >
> > At least he didn't top post or use HTML :)
> >
> >
> > --
> > Neil Bothwick
> >
> > The geek shall inherit the earth.

-- 
95% of all programmers rate themselves among the top 5% of all software 
developers. - Linus Torvalds

http://www.uwix.iway.na (last updated: 20.06.2004)
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 246 bytes --]

On Wed, 17 Aug 2005 14:32:25 -0400, Justin Denick wrote:

> Please excuse me for this question, but what is "top posting"

You just answered your own question :)


-- 
Neil Bothwick

Mosquito - designed to make houseflies look better.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-desktop] Unsubscribe

[Chris Ritchey]

On 8/17/05, Uwe Thiem <uwix@iway.na> wrote:
> On 17 August 2005 19:32, Justin Denick wrote:
> > Please excuse me for this question, but what is "top posting"
> 
> It's what you are doing. Replying at the top of the email you are replying
> to. ;-)
> 
> Uwe

Thank You! I was wondering what top-posting was as well and all these
idiotic responses of "you just did it" does help cause then one would
just go "What did I do? as far as I know I just replied."

> >
> > On 8/17/05, Neil Bothwick <neil@digimed.co.uk> wrote:
> > > On Wed, 17 Aug 2005 13:24:31 -0400, Willie Wong wrote:
> > > > Wow! This is spectacular! Not only did he sent out the unsubscribe
> > > > mail the (most popular) wrong way, he also made the faux pas of
> > > > hijacking a thread! If only two wrongs can make a right q=
> > >
> > > At least he didn't top post or use HTML :)
> > >
> > >
> > > --
> > > Neil Bothwick
> > >
> > > The geek shall inherit the earth.
> 
> --
> 95% of all programmers rate themselves among the top 5% of all software
> developers. - Linus Torvalds
> 
> http://www.uwix.iway.na (last updated: 20.06.2004)
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 


-- 
Chris Ritchey

Despite the past
Thank the present
Pray for the future
"The fear of the Lord is the beginning of knowledge"
   -Proverbs 1:7

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[John Manko]

What's the big deal? Is top posting bad posting practice?

Chris Ritchey wrote:

>On 8/17/05, Uwe Thiem <uwix@iway.na> wrote:
>  
>
>>On 17 August 2005 19:32, Justin Denick wrote:
>>    
>>
>>>Please excuse me for this question, but what is "top posting"
>>>      
>>>
>>It's what you are doing. Replying at the top of the email you are replying
>>to. ;-)
>>
>>Uwe
>>    
>>
>
>Thank You! I was wondering what top-posting was as well and all these
>idiotic responses of "you just did it" does help cause then one would
>just go "What did I do? as far as I know I just replied."
>
>  
>
>>>On 8/17/05, Neil Bothwick <neil@digimed.co.uk> wrote:
>>>      
>>>
>>>>On Wed, 17 Aug 2005 13:24:31 -0400, Willie Wong wrote:
>>>>        
>>>>
>>>>>Wow! This is spectacular! Not only did he sent out the unsubscribe
>>>>>mail the (most popular) wrong way, he also made the faux pas of
>>>>>hijacking a thread! If only two wrongs can make a right q=
>>>>>          
>>>>>
>>>>At least he didn't top post or use HTML :)
>>>>
>>>>
>>>>--
>>>>Neil Bothwick
>>>>
>>>>The geek shall inherit the earth.
>>>>        
>>>>
>>--
>>95% of all programmers rate themselves among the top 5% of all software
>>developers. - Linus Torvalds
>>
>>http://www.uwix.iway.na (last updated: 20.06.2004)
>>--
>>gentoo-desktop@gentoo.org mailing list
>>
>>
>>    
>>
>
>
>  
>
-- 
gentoo-desktop@gentoo.org mailing list

RE: [gentoo-desktop] Unsubscribe

[Glen Combe]

Well for instance ...  It makes it so the conversation is ass
backwards...  You usually read a book from the top down... Not bottom
up.   FYI... I am not normally a top poster.  

-----Original Message-----
From: John Manko [mailto:jmanko@johnmanko.com] 
Sent: Friday, August 19, 2005 9:38 AM
To: gentoo-desktop@lists.gentoo.org
Subject: Re: [gentoo-desktop] Unsubscribe

What's the big deal? Is top posting bad posting practice?

Chris Ritchey wrote:

>On 8/17/05, Uwe Thiem <uwix@iway.na> wrote:
>  
>
>>On 17 August 2005 19:32, Justin Denick wrote:
>>    
>>
>>>Please excuse me for this question, but what is "top posting"
>>>      
>>>
>>It's what you are doing. Replying at the top of the email you are
replying
>>to. ;-)
>>
>>Uwe
>>    
>>
>
>Thank You! I was wondering what top-posting was as well and all these
>idiotic responses of "you just did it" does help cause then one would
>just go "What did I do? as far as I know I just replied."
>
>  
>
>>>On 8/17/05, Neil Bothwick <neil@digimed.co.uk> wrote:
>>>      
>>>
>>>>On Wed, 17 Aug 2005 13:24:31 -0400, Willie Wong wrote:
>>>>        
>>>>
>>>>>Wow! This is spectacular! Not only did he sent out the unsubscribe
>>>>>mail the (most popular) wrong way, he also made the faux pas of
>>>>>hijacking a thread! If only two wrongs can make a right q=
>>>>>          
>>>>>
>>>>At least he didn't top post or use HTML :)
>>>>
>>>>
>>>>--
>>>>Neil Bothwick
>>>>
>>>>The geek shall inherit the earth.
>>>>        
>>>>
>>--
>>95% of all programmers rate themselves among the top 5% of all
software
>>developers. - Linus Torvalds
>>
>>http://www.uwix.iway.na (last updated: 20.06.2004)
>>--
>>gentoo-desktop@gentoo.org mailing list
>>
>>
>>    
>>
>
>
>  
>
-- 
gentoo-desktop@gentoo.org mailing list



-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Taka John Brunkhorst]

hehe i was wondering abt topposting too doh :)

On 8/20/05, Glen Combe <gcombe@co.weber.ut.us> wrote:
> Well for instance ...  It makes it so the conversation is ass
> backwards...  You usually read a book from the top down... Not bottom
> up.   FYI... I am not normally a top poster.
> 
> -----Original Message-----
> From: John Manko [mailto:jmanko@johnmanko.com]
> Sent: Friday, August 19, 2005 9:38 AM
> To: gentoo-desktop@lists.gentoo.org
> Subject: Re: [gentoo-desktop] Unsubscribe
> 
> What's the big deal? Is top posting bad posting practice?
> 
> Chris Ritchey wrote:
> 
> >On 8/17/05, Uwe Thiem <uwix@iway.na> wrote:
> >
> >
> >>On 17 August 2005 19:32, Justin Denick wrote:
> >>
> >>
> >>>Please excuse me for this question, but what is "top posting"
> >>>
> >>>
> >>It's what you are doing. Replying at the top of the email you are
> replying
> >>to. ;-)
> >>
> >>Uwe
> >>
> >>
> >
> >Thank You! I was wondering what top-posting was as well and all these
> >idiotic responses of "you just did it" does help cause then one would
> >just go "What did I do? as far as I know I just replied."
> >
> >
> >
> >>>On 8/17/05, Neil Bothwick <neil@digimed.co.uk> wrote:
> >>>
> >>>
> >>>>On Wed, 17 Aug 2005 13:24:31 -0400, Willie Wong wrote:
> >>>>
> >>>>
> >>>>>Wow! This is spectacular! Not only did he sent out the unsubscribe
> >>>>>mail the (most popular) wrong way, he also made the faux pas of
> >>>>>hijacking a thread! If only two wrongs can make a right q=
> >>>>>
> >>>>>
> >>>>At least he didn't top post or use HTML :)
> >>>>
> >>>>
> >>>>--
> >>>>Neil Bothwick
> >>>>
> >>>>The geek shall inherit the earth.
> >>>>
> >>>>
> >>--
> >>95% of all programmers rate themselves among the top 5% of all
> software
> >>developers. - Linus Torvalds
> >>
> >>http://www.uwix.iway.na (last updated: 20.06.2004)
> >>--
> >>gentoo-desktop@gentoo.org mailing list
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 
> 
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 


-- 
antiwmac@gmail.com
Taka John Brunkhorst

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Chris Gianelloni]

[-- Attachment #1: Type: text/plain, Size: 1005 bytes --]

On Sat, 2005-08-20 at 02:10 +0800, Taka John Brunkhorst wrote:
> hehe i was wondering abt topposting too doh :)

Well, it breaks up the continuity of the thought of an email.  It also
promotes one of two things, either removing the entirety of the previous
email, or leaving a big honking mess at the bottom of the email, just
like the one that you sent had.  What is probably the most courteous
method of quoting is to post your messages within what you are quoting,
underneath the text you are referring to, and removing any texts that
are not relevant to your response.  This email is a good example.

> On 8/20/05, Glen Combe <gcombe@co.weber.ut.us> wrote:
> > Well for instance ...  It makes it so the conversation is ass
> > backwards...  You usually read a book from the top down... Not bottom
> > up.   FYI... I am not normally a top poster.

So why did you do it now?  :P

-- 
Chris Gianelloni
Release Engineering - Strategic Lead/QA Manager
Games - Developer
Gentoo Linux

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-desktop] Unsubscribe

[Taka John Brunkhorst]

like this right,
 yep i agree, i use gmail too and they do good job handring those >
quotes stuff.

btw, what does 1st poster wanted to do?


-- 
antiwmac@gmail.com
Taka John Brunkhorst

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] Unsubscribe

[Shawn Noseworthy]

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] Unsubscribe

[Shawn N]

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Taka John Brunkhorst]

wrong email add to subscribe mate! 

On 8/26/05, Shawn N <n.shawn@gmail.com> wrote:
> 
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 


-- 
antiwmac@gmail.com
Taka John Brunkhorst

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Taka John Brunkhorst]

oops to unsbscribe. :)

On 8/26/05, Taka John Brunkhorst <antiwmac@gmail.com> wrote:
> wrong email add to subscribe mate!
> 
> On 8/26/05, Shawn N <n.shawn@gmail.com> wrote:
> >
> > --
> > gentoo-desktop@gentoo.org mailing list
> >
> >
> 
> 
> --
> antiwmac@gmail.com
> Taka John Brunkhorst
> 


-- 
antiwmac@gmail.com
Taka John Brunkhorst

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Terry_Foster]

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Tim McCown]

gentoo-desktop@gentoo.org mailing list


-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Chris Ritchey]

No unsubscribe for you!

On 9/19/05, Tim McCown <TMcCown@quilogy.com> wrote:
> gentoo-desktop@gentoo.org mailing list
> 
> 
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 


-- 
Chris Ritchey

Despite the past
Thank the present
Pray for the future
"The fear of the Lord is the beginning of knowledge"
   -Proverbs 1:7

-- 
gentoo-desktop@gentoo.org mailing list

RE: [gentoo-desktop] unsubscribe

[Tim McCown]

Nooo!!! Meanie.

-----Original Message-----
From: Chris Ritchey [mailto:rethnor@gmail.com] 
Sent: Monday, September 19, 2005 2:45 PM
To: gentoo-desktop@lists.gentoo.org
Subject: Re: [gentoo-desktop] unsubscribe

No unsubscribe for you!

On 9/19/05, Tim McCown <TMcCown@quilogy.com> wrote:
> gentoo-desktop@gentoo.org mailing list
> 
> 
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 


-- 
Chris Ritchey

Despite the past
Thank the present
Pray for the future
"The fear of the Lord is the beginning of knowledge"
   -Proverbs 1:7

-- 
gentoo-desktop@gentoo.org mailing list


-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Chris Ritchey]

;)

On 9/19/05, Tim McCown <TMcCown@quilogy.com> wrote:
> Nooo!!! Meanie.
> 
> -----Original Message-----
> From: Chris Ritchey [mailto:rethnor@gmail.com]
> Sent: Monday, September 19, 2005 2:45 PM
> To: gentoo-desktop@lists.gentoo.org
> Subject: Re: [gentoo-desktop] unsubscribe
> 
> No unsubscribe for you!
> 
> On 9/19/05, Tim McCown <TMcCown@quilogy.com> wrote:
> > gentoo-desktop@gentoo.org mailing list
> >
> >
> > --
> > gentoo-desktop@gentoo.org mailing list
> >
> >
> 
> 
> --
> Chris Ritchey
> 
> Despite the past
> Thank the present
> Pray for the future
> "The fear of the Lord is the beginning of knowledge"
>    -Proverbs 1:7
> 
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 
> --
> gentoo-desktop@gentoo.org mailing list
> 
> 


-- 
Chris Ritchey

Despite the past
Thank the present
Pray for the future
"The fear of the Lord is the beginning of knowledge"
   -Proverbs 1:7

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Adam Petaccia]

[-- Attachment #1: Type: text/plain, Size: 181 bytes --]

Why would you want to do that?


On Mon, 2005-09-19 at 08:44 -0500, Tim McCown wrote:
> gentoo-desktop@gentoo.org mailing list
> 
> 
-- 
Adam Petaccia <adam@tpetaccia.com>

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-desktop] unsubscribe

[Terry_Foster]

[-- Attachment #1: Type: text/plain, Size: 1728 bytes --]


Well - that was brutal...  can't mess up out here in techi-land or you
stand tall before tha man!


Re:  Trying to switch to my offshore account - Botched that, didn't I...
:)





                                                                                                                                        
                      Adam Petaccia                                                                                                     
                      <adam@tpetaccia.c        To:       gentoo-desktop@lists.gentoo.org                                                
                      om>                      cc:                                                                                      
                                               Subject:  Re: [gentoo-desktop] unsubscribe                                               
                      09/19/2005 03:53                                                                                                  
                      PM                                                                                                                
                      Please respond to                                                                                                 
                      gentoo-desktop                                                                                                    
                                                                                                                                        




Why would you want to do that?


On Mon, 2005-09-19 at 08:44 -0500, Tim McCown wrote:
> gentoo-desktop@gentoo.org mailing list
>
>
--
 Adam Petaccia <adam@tpetaccia.com>



[-- Attachment #2: signature.asc --]
[-- Type: application/octet-stream, Size: 196 bytes --]

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)

iD8DBQBDLxdNBIvjQglsR2ARAmkKAJ9Ol8fU5SZ0PnW4nO/svauEw6rh0gCcCTED
qfrn9R8dLJOG+O6jEk/fdcg=
=Z8w6
-----END PGP SIGNATURE-----

Re: [gentoo-desktop] unsubscribe

[Zac Medico]

Adam Petaccia wrote:
> Why would you want to do that?

Probably because of silly threads like this which seem to comprise approximately 10% of the traffic. ;)

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Luke-Jr]

this looks like fun! =p

Isn't Papa Johns (Terry_Foster@) a pizza restaurant? They using Gentoo? O.o;

-- 
Luke-Jr
Developer, Utopios
http://utopios.org/
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Taka John Brunkhorst]

[-- Attachment #1: Type: text/plain, Size: 120 bytes --]

hmm
sup wif all that "Unsubscribe" crap mails in gentoo mailing lists 
-- 
antiwmac@gmail.com
Taka John Brunkhorst

[-- Attachment #2: Type: text/html, Size: 180 bytes --]

[gentoo-desktop] unsubscribe

[james]

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Tim Igoe]

[-- Attachment #1: Type: text/plain, Size: 311 bytes --]

List-Unsubscribe: gentoo-desktop+unsubscribe@gentoo.org - Try sending to
the right email address

-- 
Tim Igoe
tim@igoe.me.uk
http://tim.igoe.me.uk - Personal Site
http://tv.igoe.me.uk - UK TV Guide
http://f1forums.igoe.me.uk - *New* F1 Forums

"Computers are like Air-con, open windows and they stop working!"

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-desktop] unsubscribe

[Eduardo Cesar]

2005/11/17, Tim Igoe <tim@igoe.me.uk>:
> List-Unsubscribe: gentoo-desktop+unsubscribe@gentoo.org - Try sending to
> the right email address
>
> --
> Tim Igoe
> tim@igoe.me.uk
> http://tim.igoe.me.uk - Personal Site
> http://tv.igoe.me.uk - UK TV Guide
> http://f1forums.igoe.me.uk - *New* F1 Forums
>
> "Computers are like Air-con, open windows and they stop working!"
>
>
>

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Taka John Brunkhorst]

what the...

--
Int'l Anti-Microsoft Assn. Japan/S'pore Dept.
fsck /dev/urandom;
Taka John Brunkhorst
antiwmac@gmail.com

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Pierre Poulin]

[-- Attachment #1: Type: text/plain, Size: 1 bytes --]



[-- Attachment #2: Type: text/html, Size: 233 bytes --]

Re: [gentoo-desktop] unsubscribe

[Luis Ortiz]

Pierre Poulin wrote:
> 



>From http://www.gentoo.org/main/en/lists.xml

|	To unsubscribe from a list, send an empty email to:
|
|	listname+unsubscribe@gentoo.org

:)

--
Luis Ortiz
-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[dcollaziol]

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Alari Kask]

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Denotté, Bart]

[-- Attachment #1: Type: text/plain, Size: 0 bytes --]



[-- Attachment #2: Type: text/html, Size: 288 bytes --]

Re: [gentoo-desktop] unsubscribe

[Bennet Gedan]

[-- Attachment #1: Type: text/plain, Size: 132 bytes --]

You want to write an empty mail to

gentoo-desktop+unsubscribe@gentoo.org


-- 
A)bort, R)etry, I)nfluence with large hammer

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 191 bytes --]

[gentoo-desktop] unsubscribe

[goynoi]

[-- Attachment #1: Type: text/plain, Size: 595 bytes --]


  ----- Original Message ----- 
  From: Justin Denick 
  To: gentoo-desktop@lists.gentoo.org 
  Sent: Thursday, June 08, 2006 8:39 AM
  Subject: Re: [gentoo-desktop] update world issue


  what is the error?


  On 6/7/06, maillists <lists@gmnet.net> wrote:
    Hi,

    Wen I try to emerge --update --deep world
    I get the following error:


    I have done a emerge --sync
    --
    gentoo-desktop@gentoo.org mailing list





  -- 
  Got Gentoo?

  It usually takes more than three weeks to prepare a good impromptu speech.
                  -- Mark Twain

[-- Attachment #2: Type: text/html, Size: 1933 bytes --]

Re: [gentoo-desktop] unsubscribe

[Ric de France]

Send an e-mail to

gentoo-desktop+unsubscribe@gentoo.org

Otherwise you won't get off this list...

...Ric

On 09/06/06, goynoi <goynoi@hotmail.com> wrote:
>
>
>
>
-- 
Ric de France
Ph: +61412945554 (international) or 0412945554 (Australia)
 ==> Do you, uh... Gentoo? Gentoooo-hooo!! <==
==> http://www.gentoo.org/main/en/about.xml <==
-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Davin Carlson]

unsubscribe

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Norman Rieß]

Davin Carlson schrieb:
> unsubscribe
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
>   

To unsubscribe from a list, send an empty email to:

listname+unsubscribe@gentoo.org

-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] Unsubscribe

[Christiaan Hendrikse (Kempton Park)]

Hi all,
How do I unsubscribe from this and other gentoo.org lists?

Thanks

Christiaan
CONFIDENTIALITY & DISCLAIMER NOTICE

 

This message contains specific, confidential or proprietary information for exclusive use by the individual/entities to whom/which it has been addressed. If you or your company is not the intended recipient kindly notify the sender immediately. Any use or dissemination of the contents of this message is strictly prohibited.

 

The content of this message does not constitute a commitment or an offer by Ekurhuleni Metropolitan Municipality, except where expressly provided for in a written agreement. Any views and/or opinions expressed by the sender do not necessarily represent those of the Ekurhuleni Metropolitan Municipality.

 

Ekurhuleni Metropolitan Municipality do not accept liability or legal responsibility for the contents of this message nor any errors in or omissions to the content of electronically generated communications, or any loss or damages howsoever caused, arising as a result of reliance on the contents or unauthorised use thereof. Should verification be required, kindly request the sender to do so.

 

Ekurhuleni Metropolitan Municipality have taken steps to ensure that this message is free from computer viruses, but the responsibility of detection and prevention lies solely with the recipient. Ekurhuleni Metropolitan Municipality does not warrant the integrity of the data transmitted, nor that it has not been corrupted nor previously intercepted and/or tampered with.

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Chris Gianelloni]

[-- Attachment #1: Type: text/plain, Size: 405 bytes --]

On Mon, 2006-08-28 at 15:15 +0200, Christiaan Hendrikse (Kempton Park)
wrote:
> Hi all,
> How do I unsubscribe from this and other gentoo.org lists?

To unsubscribe from a list, send an empty email to:

listname+unsubscribe@gentoo.org

http://www.gentoo.org/main/en/lists.xml

-- 
Chris Gianelloni
Release Engineering - Strategic Lead
x86 Architecture Team
Games - Developer
Gentoo Linux

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[gentoo-desktop] Unsubscribe

[Rudy Stebih]

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[Dale]

Rudy Stebih wrote:


* cough cough *

It's send a email to gentoo-desktop+unsubscribe@gentoo.org .  That
should get you rid of us.  LOL  Don't forget to confirm it though.  Hit
the ole reply button.

Dale

:-)  :-)  :-)
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] Unsubscribe

[wu yuntao]

On 11/21/06, Dale <dalek@exceedtech.net> wrote:
> Rudy Stebih wrote:
>
>
> * cough cough *
>
> It's send a email to gentoo-desktop+unsubscribe@gentoo.org .  That
> should get you rid of us.  LOL  Don't forget to confirm it though.  Hit
> the ole reply button.
>
> Dale
>
> :-)  :-)  :-)
> --
> gentoo-desktop@gentoo.org mailing list
>
>


-- 
Name:Wu Yuntao
Tel:+86 10 6894 7584
Mobile:+86 138 1078 2887
eMail: wuyuntao.1122#gmail.com
MSN: wuyuntao#live.com
( Please replace '#' with '@' )
Blog: http://my.donews.com
-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Brant Fitzsimmons]

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Dale]

Brant Fitzsimmons wrote:
>   
gentoo-desktop+unsubscribe@lists.gentoo.org will work lots better.

Dale

:-)  :-)
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Brant Fitzsimmons]

[-- Attachment #1: Type: text/plain, Size: 285 bytes --]

On Sun, 2006-12-10 at 12:51 -0600, Dale wrote:
> Brant Fitzsimmons wrote:
> >   
> gentoo-desktop+unsubscribe@lists.gentoo.org will work lots better.
> 
> Dale
> 
> :-)  :-)

Sorry.  Corrected.
-- 
Brant Fitzsimmons <brant@bfcomputerconsulting.com>
BF Computer Consulting

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[gentoo-desktop] unsubscribe

[Barry Kostjens]

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Ric de France]

Try sending an e-mail to: gentoo-desktop+unsubscribe@gentoo.org

instead of "unsubscribe in the subject"...

...Ric

On 06/01/07, Barry Kostjens <bkostjens@ilimburg.nl> wrote:
>
> --
> gentoo-desktop@gentoo.org mailing list
>
>


-- 
Ric de France
Ph: +61412945554 (international) or 0412945554 (Australia)
 ==> Do you, uh... Gentoo? Gentoooo-hooo!! <==
==> http://www.gentoo.org/main/en/about.xml <==
-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Barry Kostjens]

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Blad LEMONTE]

[-- Attachment #1: Type: text/plain, Size: 257 bytes --]

On 1/10/07, Barry Kostjens <bkostjens@ilimburg.nl> wrote:
>
>
> --
> gentoo-desktop@gentoo.org mailing list
>
>
To unsubscribe send a mail to:

gentoo-desktop+unsubscribe@gentoo.org


-- 
"In need of a fix called innocence..."
--
Best regards,
Blad LEMONTE

[-- Attachment #2: Type: text/html, Size: 777 bytes --]

Re: [gentoo-desktop] unsubscribe

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 3108 bytes --]

Here's how to unsubscribe:

First, ask your Internet Provider to mail you an Unsubscribing Kit.
Then follow these directions.

The kit will most likely be the standard no-fault type. Depending on
requirements, System A and/or System B can be used. When operating
System A, depress lever and a plastic dalkron unsubscriber will be
dispensed through the slot immediately underneath. When you have
fastened the adhesive lip, attach connection marked by the large "X"
outlet hose. Twist the silver-coloured ring one inch below the
connection point until you feel it lock.

The kit is now ready for use. The Cin-Eliminator is activated by the
small switch on the lip.  When securing, twist the ring back to its
initial condition, so that the two orange lines meet.  Disconnect.
Place the dalkron unsubscriber in the vacuum receptacle to the rear.
Activate by pressing the blue button.

The controls for System B are located on the opposite side. The red
release switch places the Cin-Eliminator into position; it can be
adjusted manually up or down by pressing the blue manual release
button. The opening is self-adjusting. To secure after use, press the
green button, which simultaneously activates the evaporator and
returns the Cin-Eliminator to its storage position.

You may log off if the green exit light is on over the evaporator.  If
the red light is illuminated, one of the Cin-Eliminator requirements
has not been properly implemented. Press the "List Guy" call button on
the right of the evaporator. He will secure all facilities from his
control panel.

To use the Auto-Unsub, first undress and place all your clothes in the
clothes rack. Put on the velcro slippers located in the cabinet
immediately below. Enter the shower, taking the entire kit with
you. On the control panel to your upper right upon entering you will
see a "Shower seal" button. Press to activate. A green light will then
be illuminated immediately below. On the intensity knob, select the
desired setting. Now depress the Auto-Unsub activation lever. Bathe
normally.

The Auto-Unsub will automatically go off after three minutes unless
you activate the "Manual off" override switch by flipping it up. When
you are ready to leave, press the blue "Shower seal" release
button. The door will open and you may leave. Please remove the velcro
slippers and place them in their container.

If you prefer the ultrasonic log-off mode, press the indicated blue
button. When the twin panels open, pull forward by rings A & B. The
knob to the left, just below the blue light, has three settings, low,
medium or high. For normal use, the medium setting is suggested.

After these settings have been made, you can activate the device by
switching to the "ON" position the clearly marked red switch. If
during the unsubscribing operation you wish to change the settings,
place the "manual off" override switch in the "OFF" position. You may
now make the change and repeat the cycle. When the green exit light
goes on, you may log off and have lunch. Please close the door behind
you.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-desktop] unsubscribe

[Justin Denick]

[-- Attachment #1: Type: text/plain, Size: 3942 bytes --]

Neil, how much time did you spend on that email?

Also, as a gentoo user I consider my computing powers to be a cut above the
Mandriva, Red Hat, W.I.M.P.S And as fellow gentoo users, I consider all of
you to be in that same class. Not bragging, but just stating the obvious.
Many of us have been using Gentoo since it came in a 32MB tar ball. From
that we defined and deployed a very usable operating system. So why is that
every week we find a Subscriber who can't get themselves take off a mailing
list.

I administer a small network of maybe a hundred users or so. Even they can
do it and they don't even know their using linux!!!!!!!!

On 1/10/07, Neil Bothwick <neil@digimed.co.uk> wrote:
>
> Here's how to unsubscribe:
>
> First, ask your Internet Provider to mail you an Unsubscribing Kit.
> Then follow these directions.
>
> The kit will most likely be the standard no-fault type. Depending on
> requirements, System A and/or System B can be used. When operating
> System A, depress lever and a plastic dalkron unsubscriber will be
> dispensed through the slot immediately underneath. When you have
> fastened the adhesive lip, attach connection marked by the large "X"
> outlet hose. Twist the silver-coloured ring one inch below the
> connection point until you feel it lock.
>
> The kit is now ready for use. The Cin-Eliminator is activated by the
> small switch on the lip.  When securing, twist the ring back to its
> initial condition, so that the two orange lines meet.  Disconnect.
> Place the dalkron unsubscriber in the vacuum receptacle to the rear.
> Activate by pressing the blue button.
>
> The controls for System B are located on the opposite side. The red
> release switch places the Cin-Eliminator into position; it can be
> adjusted manually up or down by pressing the blue manual release
> button. The opening is self-adjusting. To secure after use, press the
> green button, which simultaneously activates the evaporator and
> returns the Cin-Eliminator to its storage position.
>
> You may log off if the green exit light is on over the evaporator.  If
> the red light is illuminated, one of the Cin-Eliminator requirements
> has not been properly implemented. Press the "List Guy" call button on
> the right of the evaporator. He will secure all facilities from his
> control panel.
>
> To use the Auto-Unsub, first undress and place all your clothes in the
> clothes rack. Put on the velcro slippers located in the cabinet
> immediately below. Enter the shower, taking the entire kit with
> you. On the control panel to your upper right upon entering you will
> see a "Shower seal" button. Press to activate. A green light will then
> be illuminated immediately below. On the intensity knob, select the
> desired setting. Now depress the Auto-Unsub activation lever. Bathe
> normally.
>
> The Auto-Unsub will automatically go off after three minutes unless
> you activate the "Manual off" override switch by flipping it up. When
> you are ready to leave, press the blue "Shower seal" release
> button. The door will open and you may leave. Please remove the velcro
> slippers and place them in their container.
>
> If you prefer the ultrasonic log-off mode, press the indicated blue
> button. When the twin panels open, pull forward by rings A & B. The
> knob to the left, just below the blue light, has three settings, low,
> medium or high. For normal use, the medium setting is suggested.
>
> After these settings have been made, you can activate the device by
> switching to the "ON" position the clearly marked red switch. If
> during the unsubscribing operation you wish to change the settings,
> place the "manual off" override switch in the "OFF" position. You may
> now make the change and repeat the cycle. When the green exit light
> goes on, you may log off and have lunch. Please close the door behind
> you.
>
>
>


-- 
In vino veritas.
        [In wine there is truth.]
                -- Pliny

[-- Attachment #2: Type: text/html, Size: 4585 bytes --]

Re: [gentoo-desktop] unsubscribe

[Neil Bothwick]

[-- Attachment #1: Type: text/plain, Size: 327 bytes --]

On Wed, 10 Jan 2007 08:50:07 -0500, Justin Denick wrote:

> Neil, how much time did you spend on that email?

Longer than I'd have liked, because Claws Mail used the godawful GTK file
selector, so it took several seconds to insert the file :)


-- 
Neil Bothwick

Remember the good old days, when CPU was singular?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[gentoo-desktop] unsubscribe

[Stephane Germain]

[-- Attachment #1: Type: text/plain, Size: 16 bytes --]

unsubscribe

 


[-- Attachment #2: Type: text/html, Size: 2081 bytes --]

Re: [gentoo-desktop] unsubscribe

[Dale]

[-- Attachment #1: Type: text/plain, Size: 170 bytes --]

Stephane Germain wrote:
>
> unsubscribe
>
>  
>

gentoo-desktop+unsubscribe@lists.gentoo.org will work lots better.

Dale

 :-)    :-) 



-- 
www.myspace.com/dalek1967


[-- Attachment #2: Type: text/html, Size: 2502 bytes --]

[gentoo-desktop] unsubscribe

[David Won]

[-- Attachment #1: Type: text/plain, Size: 52 bytes --]

unsubscribe

-- 
http://www.tabooki.com/xoops/html/

[-- Attachment #2: Type: text/html, Size: 122 bytes --]

Re: [gentoo-desktop] unsubscribe

[Justin Denick]

[-- Attachment #1: Type: text/plain, Size: 302 bytes --]

Hey Dave, have you ever read any of the unsubscribe messages?

gentoo-desktop+unsubscribe@lists.gentoo.org

On 2/8/07, David Won <daveshome@gmail.com> wrote:
>
> unsubscribe
>
> --
> http://www.tabooki.com/xoops/html/




-- 
In vino veritas.
        [In wine there is truth.]
                -- Pliny

[-- Attachment #2: Type: text/html, Size: 951 bytes --]

Re: [gentoo-desktop] unsubscribe

[Peter Lewis]

On Friday 09 February 2007 12:47, Justin Denick wrote:
<snip>
>In vino veritas.
>      [In wine there is truth.]
>               -- Pliny

the elder or younger?

Just curious... :-)
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Justin Denick]

[-- Attachment #1: Type: text/plain, Size: 426 bytes --]

I think that Seneca was the Younger

On 2/12/07, Peter Lewis <prlewis@letterboxes.org> wrote:
>
> On Friday 09 February 2007 12:47, Justin Denick wrote:
> <snip>
> >In vino veritas.
> >      [In wine there is truth.]
> >               -- Pliny
>
> the elder or younger?
>
> Just curious... :-)
> --
> gentoo-desktop@gentoo.org mailing list
>
>


-- 
In vino veritas.
        [In wine there is truth.]
                -- Pliny

[-- Attachment #2: Type: text/html, Size: 1026 bytes --]

Re: [gentoo-desktop] unsubscribe

[Jeff Rollin]

[-- Attachment #1: Type: text/plain, Size: 175 bytes --]

On 12/02/07, Justin Denick <justin.denick@gmail.com> wrote:
>
> I think that Seneca was the Younger


You mean he of "Delenda est Carthago!" at the end of every speech?

Jeff

[-- Attachment #2: Type: text/html, Size: 484 bytes --]

[gentoo-desktop] unsubscribe

[Michael Taylor]

On Sun, 2005-12-25 at 19:46 +0200, Serge wrote:
> I am using the 0.2.10 version [masked] and it works great.
> Serge
> 
> On Sunday, 25 בDecember 2005 19:41, M. Edward (Ed) Borasky wrote:
> > Yeah ... I had a version of k3b that would only see the devices as root.
> > I'm running 0.12.8 at the moment, and it sees the devices as non-root.
> >
> > Adrian wrote:
> > >On Sat, 24 Dec 2005 21:00:54 -0600
> > >
> > >Lindsay Haisley <fmouse-gentoo@fmp.com> wrote the words:
> > >>K3b used to be my best CD creating and duplicating app, but today when
> > >>I tried to do a CD copy the program apparently wouldn't recoginze the
> > >>source CD for copying.  I can see the CD-R unit (Sony CD-RW CRX230E)
> > >>with diskinfo, and this unit shows up as the "CD Reader Device" in the
> > >>CD Copy dialog, however the Start button in this dialog is disabled
> > >>and nothing I do seems to enable it.  If I start k3b from a cli
> > >>prompt, I get a dozen or so lines of "k3b: ERROR: (K3bDevice::Device)
> > >>Unable to do inquiry." although this may have no bearing on the
> > >>problem.
> > >
> > >I had this problem as well.  Did you upgrade K3b lately?  I emerged the
> > >latest version and this happened.  I went back to the previous version I
> > >had installed and now it works fine.
> > >
> > >Adrian
> >
> > --
> > M. Edward (Ed) Borasky
> >
> > http://linuxcapacityplanning.com
> 
> -- 
> Serge.
> _______________________
> Sent with KMail
> Powered by Gentoo Linux
> _______________________
> 

-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Elfyn McBratney]

On 22/04/07, Michael Taylor wrote:
> [...]

Requesting unsubscription from this mailing list by sending mail to it
won't work; try actually reading the instructions on www.gentoo.org
(Mailing Lists section).  Hint: you need to e-mail
gentoo-desktop-unsubscribe@g.o, not gentoo-desktop@g.o
-- 
gentoo-desktop@gentoo.org mailing list

Re: [gentoo-desktop] unsubscribe

[Fabio A Correa]

And please, do not top-post; that is annoying.

-- 
Fabio A. Correa D.

Physics Dept, Universidad Nacional, Bogota, Colombia
facorread@gmail.com
ffaaccdd@yahoo.co.uk         facorread@unal.edu.co
My webpage and OpenPGP key at http://facorread.150m.com
facorread@alexandria.cc is not working anymore!!!
-- 
gentoo-desktop@gentoo.org mailing list

[gentoo-desktop] unsubscribe

[Frank Freeman]

unsubscribe

-----Original Message-----
From: gentoo-desktop+help@lists.gentoo.org [mailto:gentoo-desktop+help@lists.gentoo.org] 
Sent: Saturday, January 24, 2009 7:00 PM
To: ffreeman@digitalns.net
Subject: Digest of gentoo-desktop@lists.gentoo.org issue 129 (1215-1218)

Topics (messages 1215 through 1218):

[gentoo-desktop] KDE Overlays' Changes
      1215 - Theo Chatzimichos <tampakrap@gmail.com>

[gentoo-desktop] [kde-testing] pykde4-4.1.96 won't compile
      1216 - Paul Hartman <paul.hartman+gentoo@gmail.com>

[gentoo-desktop] [kde-testing] pykde4-4.1.96 won't compile
      1217 - Ben de Groot <yngwin@gentoo.org>

[gentoo-desktop] [kde-testing] pykde4-4.1.96 won't compile
      1218 - Paul Hartman <paul.hartman+gentoo@gmail.com>

Re: [gentoo-desktop] unsubscribe

[Dale]

*cough cough *  Try this instead.  Send a blank email to:

gentoo-desktop+unsubscribe@gentoo.org

then follow the directs it send back.

I top posted cause I suspect he is not a mailing list expert.  Forgive
me this once. 

Dale

:-)  :-) 




Frank Freeman wrote:
> unsubscribe
>
> -----Original Message-----
> From: gentoo-desktop+help@lists.gentoo.org [mailto:gentoo-desktop+help@lists.gentoo.org] 
> Sent: Saturday, January 24, 2009 7:00 PM
> To: ffreeman@digitalns.net
> Subject: Digest of gentoo-desktop@lists.gentoo.org issue 129 (1215-1218)
>
> Topics (messages 1215 through 1218):
>
> [gentoo-desktop] KDE Overlays' Changes
>       1215 - Theo Chatzimichos <tampakrap@gmail.com>
>
> [gentoo-desktop] [kde-testing] pykde4-4.1.96 won't compile
>       1216 - Paul Hartman <paul.hartman+gentoo@gmail.com>
>
> [gentoo-desktop] [kde-testing] pykde4-4.1.96 won't compile
>       1217 - Ben de Groot <yngwin@gentoo.org>
>
> [gentoo-desktop] [kde-testing] pykde4-4.1.96 won't compile
>       1218 - Paul Hartman <paul.hartman+gentoo@gmail.com>
>
>
>
>
>
>   

[gentoo-desktop] unsubscribe

[Frank Freeman]

unsubscribe

Re: [gentoo-desktop] unsubscribe

[Harry Holt]

[-- Attachment #1: Type: text/plain, Size: 3760 bytes --]

On Sat, Jan 31, 2009 at 11:18 PM, Frank Freeman <ffreeman@digitalns.net>wrote:

> unsubscribe
>
> Hmph.  You can't get out that easy.

Please Note:  In some later model unsubscribe kits, the "OFF" indicator has
been replaced by "POWER-UP STANDBY ENABLE".  Accordingly the "ON" indicator
has been replaced by the much clearer, "POWER-DOWN STANDBY ENABLE".  Contact
your internet service provider for a list of affected model numbers.  An
"ON-OFF" retrofit panel kit is available for those who have difficulty with
the new and much clearer labeling.


First, ask your Internet Provider to mail you an Unsubscribing Kit.
Then follow these
directions. The kit will most likely be the standard no-fault type.
Depending on
requirements, System A and/or System B can be used. When operating
System A, depress
lever and a plastic dalkron unsubscriber will be dispensed through the slot
immediately underneath. When you have fastened the adhesive lip,
attach connection
marked by the large "X" outlet hose. Twist the silver- coloured ring
one inch below
the connection point until you feel it lock.

The kit is now ready for use. The Cin-Eliminator is activated by the
small switch on
the lip. When securing, twist the ring back to its initial condition,
so that the two
orange lines meet. Disconnect. Place the dalkron unsubscriber in the
vacuum receptacle
to the rear. Activate by pressing the blue button.

The controls for System B are located on the opposite side. The red
release switch
places the Cin-Eliminator into position; it can be adjusted manually
up or down by
pressing the blue manual release button. The opening is self-
adjusting. To secure
after use, press the green button, which simultaneously activates the
evaporator and
returns the Cin-Eliminator to its storage position.

You may log off if the green exit light is on over the evaporator . If
the red light
is illuminated, one of the Cin-Eliminator requirements has not been properly
implemented. Press the "List Guy" call button on the right of the
evaporator . He will
secure all facilities from his control panel.

To use the Auto-Unsub, first undress and place all your clothes in the
clothes rack.
Put on the velcro slippers located in the cabinet immediately below.
Enter the shower,
taking the entire kit with you. On the control panel to your upper
right upon entering
you will see a "Shower seal" button. Press to activate. A green light
will then be
illuminated immediately below. On the intensity knob, select the
desired setting. Now
depress the Auto-Unsub activation lever. Bathe normally.

The Auto-Unsub will automatically go off after three minutes unless
you activate the
"Manual off" override switch by flipping it up. When you are ready to
leave, press the
blue "Shower seal" release button. The door will open and you may
leave. Please remove
the velcro slippers and place them in their container.

If you prefer the ultrasonic log-off mode, press the indicated blue
button. When the
twin panels open, pull forward by rings A & B. The knob to the left,
just below the
blue light, has three settings, low, medium or high. For normal use, the medium
setting is suggested.

After these settings have been made, you can activate the device by
switching to the
"ON" position the clearly marked red switch. If during the
unsubscribing operation,
you wish to change the settings, place the "manual off" override
switch in the "OFF"
position. You may now make the change and repeat the cycle. When the
green exit light
goes on, you may log off and have lunch. Please close the door behind you.


Harry Holt, PMP

"Somebody has to do something, and it's just incredibly pathetic that it has
to be us."
 - Jerry Garcia

 P.S.  I'll go ahead and apologize now.  It won't happen again.

[-- Attachment #2: Type: text/html, Size: 4508 bytes --]

Re: [gentoo-desktop] unsubscribe

[Lindsay Haisley]

On Sat, 2009-01-31 at 23:23 -0500, Harry Holt wrote:
> 
> On Sat, Jan 31, 2009 at 11:18 PM, Frank Freeman
> <ffreeman@digitalns.net> wrote:
>         unsubscribe
>         
> Hmph.  You can't get out that easy.
> 
> Please Note:  In some later model unsubscribe kits, the "OFF" indicator has
> been replaced by "POWER-UP STANDBY ENABLE".  Accordingly the "ON" indicator
> 
> has been replaced by the much clearer, "POWER-DOWN STANDBY ENABLE".  Contact
> your internet service provider for a list of affected model numbers.  An
> "ON-OFF" retrofit panel kit is available for those who have difficulty with

Harry, your directions to Mr. Freeman were clear and concise.  I didn't
realize that the process of unsubscribing was so simple.  I believe you
forgot one thing though.  He will, at some point, need to wash his mouse
out with soap.  If he uses the Auto-Unusb feature, this can easily done
while he's in the shower, but if he uses some other proceedure, some
other provision must be made for completing this step.

-- 
Lindsay Haisley       | "The difference between |     PGP public key
FMP Computer Services |  a duck is that one leg |      available at
512-259-1190          |    is  both the same"   | http://pubkeys.fmp.com
http://www.fmp.com    |       - Anonymous       |

Re: [gentoo-desktop] unsubscribe

[Michelangelo Bottura]

On Sun, Feb 1, 2009 at 22:54, Lindsay Haisley <fmouse-gentoo@fmp.com> wrote:
> On Sat, 2009-01-31 at 23:23 -0500, Harry Holt wrote:
>>
>> On Sat, Jan 31, 2009 at 11:18 PM, Frank Freeman
>> <ffreeman@digitalns.net> wrote:
>>         unsubscribe
>>
>> Hmph.  You can't get out that easy.
>>
>> Please Note:  In some later model unsubscribe kits, the "OFF" indicator has
>> been replaced by "POWER-UP STANDBY ENABLE".  Accordingly the "ON" indicator
>>
>> has been replaced by the much clearer, "POWER-DOWN STANDBY ENABLE".  Contact
>> your internet service provider for a list of affected model numbers.  An
>> "ON-OFF" retrofit panel kit is available for those who have difficulty with
>
> Harry, your directions to Mr. Freeman were clear and concise.  I didn't
> realize that the process of unsubscribing was so simple.  I believe you
> forgot one thing though.  He will, at some point, need to wash his mouse
> out with soap.  If he uses the Auto-Unusb feature, this can easily done
> while he's in the shower, but if he uses some other proceedure, some
> other provision must be made for completing this step.
>
> --
> Lindsay Haisley       | "The difference between |     PGP public key
> FMP Computer Services |  a duck is that one leg |      available at
> 512-259-1190          |    is  both the same"   | http://pubkeys.fmp.com
> http://www.fmp.com    |       - Anonymous       |
>
>
>
Lindsay,
even your directions, still being in the right track, miss the obvious
caveat: the user has to be warned (for the sake of completeness) that
he must be particularly wary if he owns a cat - in that case the
auto-unsub feature might not work and require manual intervention.

Ciao,

michelangelo

Re: [gentoo-desktop] unsubscribe

[Lindsay Haisley]

On Mon, 2009-02-02 at 01:39 +0100, Michelangelo Bottura wrote:
> even your directions, still being in the right track, miss the obvious
> caveat: the user has to be warned (for the sake of completeness) that
> he must be particularly wary if he owns a cat - in that case the
> auto-unsub feature might not work and require manual intervention.

That's correct.  It's recommended that a list subscriber unsubscribe
from any cat he or she may own prior to attempting any other unsubscribe
procedure as described by Mr. Holt.  I believe, however, that a
discussion of the process of unsubscribing from a cat is rather
seriously OT for this list.

-- 
Lindsay Haisley       | "Everything works    |    Accredited
FMP Computer Services |       if you let it" |      by the
512-259-1190          |    (The Roadie)      |   Austin Better
http://www.fmp.com    |                      |  Business Bureau

[gentoo-desktop] unsubscribe

[Tristan Helmich]

Re: [gentoo-desktop] unsubscribe

[Norman Rieß]

Tristan Helmich wrote:

To unsubscribe from a list, send an empty email to:

listname+unsubscribe@lists.gentoo.org

[gentoo-desktop] UNSUBSCRIBE

[袁佳敏]

[-- Attachment #1: Type: text/plain, Size: 13 bytes --]

UNSUBSCRIBE


[-- Attachment #2: Type: text/html, Size: 1905 bytes --]

Re: [gentoo-desktop] UNSUBSCRIBE

[Dale]

chrome://messenger/locale/messengercompose/composeMsgs.properties:
>
> UNSUBSCRIBE
>

NO!! You joined and we are going to hold you hostage. You can check out
but you can never leave. LOL :-D

http://www.gentoo.org/main/en/lists.xml

Go to that link and follow the unsubscribe instructions. Then you may
leave. Don't forget to reply to the confirmation otherwise you are not
checked out yet.

If you check the headers, the email link is there as well.

Dale

:-) :-)

[gentoo-desktop] unsubscribe

[Julien Gormotte]

Re: [gentoo-desktop] unsubscribe

[Norman Rieß]

Am 05/04/10 08:23, schrieb Julien Gormotte:
>
>
Hello,

List-Unsubscribe: <mailto:gentoo-desktop+unsubscribe@lists.gentoo.org>

that is, what you want to do.

Regards,
Norman

[gentoo-desktop] UNSUBSCRIBE

[Tristan Helmich]

UNSUBSCRIBE

Re: [gentoo-desktop] UNSUBSCRIBE

[Dale]

Tristan Helmich wrote:
> UNSUBSCRIBE
>
>    

Nope, not yet.  lol   Read this first, then you can go.

http://www.gentoo.org/main/en/lists.xml

Hope that helps.

Dale

:-)  :-)

[gentoo-desktop] UNSUBSCRIBE

[Chris Wallraff]

UNSUBSCRIBE

Re: [gentoo-desktop] UNSUBSCRIBE

[Dale]

Chris Wallraff wrote:
> UNSUBSCRIBE
>
>
>    

Nope.  Ain't going to happen.  Why?  You ain't doing it right yet.  Try 
this:

Send a email to:

gentoo-desktop+unsubscribe@lists.gentoo.org

When it sends you a confirmation, hit reply and send.  Then you can 
unsubscribe from the list.  You can also check the headers for the info 
too.

Dale

:-)  :-)

P. S.  I do get a kick out of these.  People figure oout how to get on 
here but can't get off here.  lol

Re: [gentoo-desktop] UNSUBSCRIBE

[Paul Hartman]

On Tue, Mar 15, 2011 at 6:20 PM, Dale <rdalek1967@gmail.com> wrote:
> P. S.  I do get a kick out of these.  People figure oout how to get on here
> but can't get off here.  lol

Especially when every single message contains these useful headers:

List-Post: <mailto:gentoo-desktop@lists.gentoo.org>
List-Help: <mailto:gentoo-desktop+help@lists.gentoo.org>
List-Unsubscribe: <mailto:gentoo-desktop+unsubscribe@lists.gentoo.org>
List-Subscribe: <mailto:gentoo-desktop+subscribe@lists.gentoo.org>

And, of course, when people sign up they are sent this information:

> Welcome! You have been subscribed to the
>
> gentoo-desktop@lists.gentoo.org
>
> mailinglist.
>
> To unsubscribe send a message to:
>
> gentoo-desktop+unsubscribe@lists.gentoo.org
>
> And for help send a message to:
>
> gentoo-desktop+help@lists.gentoo.org
>


Not to mention the very first result for "gentoo mailing list" on google is:
http://www.gentoo.org/main/en/lists.xml

(which contains the above mentioned information and more)

Re: [gentoo-desktop] UNSUBSCRIBE

[Dale]

Paul Hartman wrote:
> On Tue, Mar 15, 2011 at 6:20 PM, Dale<rdalek1967@gmail.com>  wrote:
>    
>> P. S.  I do get a kick out of these.  People figure oout how to get on here
>> but can't get off here.  lol
>>      
> Especially when every single message contains these useful headers:
>
> List-Post:<mailto:gentoo-desktop@lists.gentoo.org>
> List-Help:<mailto:gentoo-desktop+help@lists.gentoo.org>
> List-Unsubscribe:<mailto:gentoo-desktop+unsubscribe@lists.gentoo.org>
> List-Subscribe:<mailto:gentoo-desktop+subscribe@lists.gentoo.org>
>
> And, of course, when people sign up they are sent this information:
>
>    
>> Welcome! You have been subscribed to the
>>
>> gentoo-desktop@lists.gentoo.org
>>
>> mailinglist.
>>
>> To unsubscribe send a message to:
>>
>> gentoo-desktop+unsubscribe@lists.gentoo.org
>>
>> And for help send a message to:
>>
>> gentoo-desktop+help@lists.gentoo.org
>>
>>      
>
> Not to mention the very first result for "gentoo mailing list" on google is:
> http://www.gentoo.org/main/en/lists.xml
>
> (which contains the above mentioned information and more)
>
>
>    

And let's not forget, they almost certainly got the instructions to 
subscribe off the Gentoo mailing list page.  Most any mailing list I 
have ever seen has the instructions to subscribe and unsubscribe on the 
same page.

Sort of weird people can't remember how they subscribed.

Dale

:-)  :-)

[gentoo-desktop] UNSUBSCRIBE

[Eppo Beertema]

[-- Attachment #1: Type: text/plain, Size: 10378 bytes --]

On 20 September 2011 23:03, <gentoo-desktop+help@lists.gentoo.org> wrote:

> Topics (messages 1986 through 1994):
>
> [gentoo-desktop] How to get rid of things depending on KDE4.
>      1986 - Dale <rdalek1967@gmail.com>
>
> [gentoo-desktop] How to get rid of things depending on KDE4.
>      1987 - Sebastian Beßler <sebastian@darkmetatron.de>
>
> [gentoo-desktop] How to get rid of things depending on KDE4.
>      1988 - Alex Schuster <wonko@wonkology.org>
>
> [gentoo-desktop] How to get rid of things depending on KDE4.
>      1989 - Michał Górny <mgorny@gentoo.org>
>
> [gentoo-desktop] How to get rid of things depending on KDE4.
>      1990 - Sebastian Beßler <sebastian@darkmetatron.de>
>
> [gentoo-desktop] How to get rid of things depending on KDE4.
>      1991 - Alex Schuster <wonko@wonkology.org>
>
> [gentoo-desktop] kde-base/kdebase-kioslaves-3.5.10-r1 and hal USE flag
>      1992 - Alex Schuster <wonko@wonkology.org>
>
> [gentoo-desktop] How to get rid of things depending on KDE4.
>      1993 - Dale <rdalek1967@gmail.com>
>
> [gentoo-desktop] How to get rid of things depending on KDE4.
>      1994 - Dale <rdalek1967@gmail.com>
>
>
>
> I am still working on a stable install of KDE3 for a friend.  Thing is,
> some KDE4 stuff keeps getting pulled in.  This is the list as best as I can
> tell with my command:
>
> kde-base/khelpcenter-4.7.1
> kde-base/kdesu-4.7.1
> kde-base/nepomuk-4.7.1
> kde-base/kdelibs-4.7.1
> kde-base/kde-env-4.7.1
>
> I suspect this is a USE flag problem but I can't figure it out for the life
> of me.  Here is the USE line from emerge --info:
>
> USE="3dnow 3dnowext X aac acpi alsa aml apng auto-hinter automount avahi
> bash-completion berkdb bzip2 cairo cdda cddb cdr chroot cleartype cli
> clucene consolekit corefonts cracklib cups curl cxx dbus declarative dri dvd
> dvdr emboss encode escreen esd exif fam fdftk ffmpeg firefox flac fortran
> gdbm gdu gif gimp gkrellm gnutls gphoto2 gpm gtk hbci hddtemp iconv ipv6
> java javascript jbig jpeg jpeg2k justify kde kipi lcms libnotify libwww
> logrotate loop-aes mad mdnsresponder-compat melt mmx mng modules mp3 mp4
> mpeg mplayer mudflap mysql ncurses nls nptl nptlonly nsplugin offensive ofx
> ogg opengl openmp pam pango parport pcre pdf perl phonon plasma png
> policykit ppds ppp pppd python qt3 qt3support qt4 readline sasl sdl
> seamonkey semantic-desktop session sift smp spell sse ssl
> startup-notification svg sysfs syslog tcl tcpd threads tiff tk truetype
> type1 udev unicode usb vcd vorbis webkit win32codecs wma wmf x264 x86 xcb
> xcomposite xinerama xml xorg xscreensaver xv xvid yahoo zeroconf zlib"
>
> I have policykit disabled in make.conf but it is enabled according to
> emerge --info.  Is that the problem?  One of them at least?  I have tried to
> remove that but they keep getting pulled in.  I did get rid of some but
> these last few are hair pullers to get rid of.
>
> Thanks for any tips.
>
> Dale
>
> :-)  :-)
>
> Am 18.09.2011 21:39, schrieb Dale:
>
> > Thanks for any tips.
>
> The first I would try is to remove the kde and kipi flags. If that helps
> then set them via package.use for one package at a time  so you find
> what pulls kde4.
>
> Greetings
>
> Sebastian
>
>
> Dale writes:
>
> > I am still working on a stable install of KDE3 for a friend.
>
> I gave up on this. I was not able to enable HAL :-)
>
> > Thing is,
> > some KDE4 stuff keeps getting pulled in.  This is the list as best as I
> > can tell with my command:
> >
> > kde-base/khelpcenter-4.7.1
> > kde-base/kdesu-4.7.1
> > kde-base/nepomuk-4.7.1
> > kde-base/kdelibs-4.7.1
> > kde-base/kde-env-4.7.1
>
> Use the -t/--tree argument to emerge, this will tell you what is pulling
> them in.
>
>        Wonko
>
> On Sun, 18 Sep 2011 14:39:12 -0500
> Dale <rdalek1967@gmail.com> wrote:
>
> > I am still working on a stable install of KDE3 for a friend.  Thing
> > is, some KDE4 stuff keeps getting pulled in.  This is the list as
> > best as I can tell with my command:
> >
> > kde-base/khelpcenter-4.7.1
> > kde-base/kdesu-4.7.1
> > kde-base/nepomuk-4.7.1
> > kde-base/kdelibs-4.7.1
> > kde-base/kde-env-4.7.1
>
> emerge --depclean -v =kde-base/khelpcenter-4.7.1
>
> should show what keeps it around. And similarly for remaining packages.
>
> --
> Best regards,
> Michał Górny
>
> Am 18.09.2011 23:23, schrieb Alex Schuster:
> > Dale writes:
> >
> >> I am still working on a stable install of KDE3 for a friend.
> >
> > I gave up on this. I was not able to enable HAL :-)
>
> HAL is just on of many good reasons to avoid KDE3 and use something else
> like e17 or xfce4. If KDE tools are needed then use the ones from KDE4,
> they work flawless with other DE and WM
>
> Greetings
>
> Sebastian Beßler
>
>
>
> Sebastian Beßler writes:
>
> > Am 18.09.2011 23:23, schrieb Alex Schuster:
> > > Dale writes:
> > >
> > >> I am still working on a stable install of KDE3 for a friend.
> > >
> > > I gave up on this. I was not able to enable HAL :-)
> >
> > HAL is just on of many good reasons to avoid KDE3 and use something else
> > like e17 or xfce4. If KDE tools are needed then use the ones from KDE4,
> > they work flawless with other DE and WM
>
> The problem were the kioslaves, without HAL, KDE3 was unable to detect
> and automount external media. I wanted to keep the setup, the PC is
> rather old and slow, but in the end I switched to KDE4. Using Sabayon
> Linux instead of Gentoo, in order to avoid the compiles.
>
>        Wonko
>
> Sorry for the looong delay. It's partially because I the system it remote
> and I do not always have access to it, and partially because I nearly
> forgot about this :)  Sorry for that.
>
> Long, long ago Tiago Marques wrote:
>
> > On Wed, Jul 13, 2011 at 11:29 PM, Brent Busby <brent@keycorner.org>
> > wrote:
> > > On Tue, 12 Jul 2011, Alex Schuster wrote:
>
> > >> Auto-mounting of external media like CDs does not work, I assume
> > >> it's because I have no HAL support for kioslaves:
> > >>
> > >> leela ~ # USE=hal emerge -pv kde-base/kdebase-kioslaves:3.5
> > >>
> > >> These are the packages that would be merged, in order:
> > >>
> > >> Calculating dependencies... done!
> > >> [ebuild   R    ] kde-base/kdebase-kioslaves-3.**5.10-r1  USE="ldap
> > >> samba -
> > >> debug (-hal) -kdehiddenvisibility -openexr" 0 kB [1]
>
> > >> The (-hal) probably means that this USE flag is disabled by profile.
> > >> Is there a way to enable it? Or does one have to mount CDs manually
> > >> with KDE 3.5 now?
> > >>
> > >> I tried to put -hal in package.use.mask, and hal in
> > >> package.use.force (whatever thsi is). And in package.use of course,
> > >> but this does not help. When I look into the ebuild, it seems that
> > >> sys- apps/dbus has to be compiled with qt3, but there is no such USE
> > >> flag for this package. Maybe that's why hal is masked in the first
> > >> place.
> > >>
> > >> So, is there anything I can do about it?
> > >
> > > Here's what I've had to do...
> > >
> > > In /etc/portage/package.use.mask:
> > >
> > > kde-base/kdebase-kioslaves -hal
> > > app-cdr/k3b -hal
>
> Here, too.
>
> > > In /etc/portage/package.keywords (because newer masked ebuilds of
> > > these two packages solve some build issues):
> > >
> > > kde-base/kdelibs:3.5 ~amd64
> > > kde-base/kcontrol:3.5 ~amd64
>
> Done (with ~x86 instead).
>
> > > In /etc/portage/package.unmask:
> > >
> > > kde-base/kdelibs:3.5
> > > kde-base/kcontrol:3.5
> >
> > > Hope this helps...
>
> No, it did not help :(
>
> > Install this and all will be ok:
> >
> > kde-base/kdebase-kioslaves-3.5.10-r1
> > sys-apps/dbus-1.2.24
> > sys-apps/hal-0.5.13-r2
>
> I tried, getting these ooold versions from the attic.  But it still
> didn't work out.
>
> But the PC is a rather old one, and so I decided to go away from Gentoo.
> Using distcc helped, but only when I and my fast (well not really, but
> much faster than that old Sempron) PC were there. I decided to try
> Sabayon Linux, which is based on Gentoo, but binary. There is no KDE3,
> though, so I had to install KDE4. Which is somewhat slow, maybe Xfce4 or
> LXDE will be better.
>
> BTW, I'm not too happy with Sabayon either. The equo package manager is
> not as sophisticated as emerge, for example it looks like it is not
> possible to call it when another instance is already running. And I do
> not yet understand how I can mix equo with portage. But I dod not dig
> into this too much, the person using this PC mainly uses KMail, Firefox
> and aMSN, and this is working fine.
>
> Anyway, thanks both of you for your assistance.
>
>        Wonk
>
> Michał Górny wrote:
>
>> On Sun, 18 Sep 2011 14:39:12 -0500
>> Dale<rdalek1967@gmail.com>  wrote:
>>
>> I am still working on a stable install of KDE3 for a friend.  Thing
>>> is, some KDE4 stuff keeps getting pulled in.  This is the list as
>>> best as I can tell with my command:
>>>
>>> kde-base/khelpcenter-4.7.1
>>> kde-base/kdesu-4.7.1
>>> kde-base/nepomuk-4.7.1
>>> kde-base/kdelibs-4.7.1
>>> kde-base/kde-env-4.7.1
>>>
>> emerge --depclean -v =kde-base/khelpcenter-4.7.1
>>
>> should show what keeps it around. And similarly for remaining packages.
>>
>> Did some of that already, just forgot to mention it.  It seems to go into
> circles.  I installed KDE4 first then KDE3.  I'm thinking about getting rid
> of them both then installing just KDE3.  I really think there is some USE
> flag that is doing this.
>
> I did remove the KDE USE flag.  It didn't help.  I'm going to switch to a
> plain Desktop profile.  I think I have it on the KDE profile not that I
> think about it.
>
> Thanks.
>
> Dale
>
> :-)  :-)
>
> Sebastian Beßler wrote:
>
>> Am 18.09.2011 21:39, schrieb Dale:
>>
>> Thanks for any tips.
>>>
>> The first I would try is to remove the kde and kipi flags. If that helps
>> then set them via package.use for one package at a time  so you find
>> what pulls kde4.
>>
>> Greetings
>>
>> Sebastian
>>
>>
> I set it to a plain desktop profile and that seemed to clean things up
> nicely.  Now we cooking with KDE3.
>
> Thanks much.  I knew it was something simple that I was missing.
>
> Dale
>
> :-)  :-)
>
>

[-- Attachment #2: Type: text/html, Size: 12319 bytes --]

Re: [gentoo-desktop] UNSUBSCRIBE

[Paul Hartman]

You need to email gentoo-desktop+unsubscribe@lists.gentoo.org to unsubscribe.

[gentoo-desktop] Unsubscribe

[Eddie Mihalow Jr]

Unsubscribe

-- 
Edward A Mihalow Jr
Mudbug Computers and Networks
Geaux Saints!

[gentoo-desktop] Unsubscribe

[Eddie Mihalow Jr]

Unsubscribe

-- 
Edward A Mihalow Jr
Mudbug Computers and Networks
Geaux Saints!

Re: [gentoo-desktop] Unsubscribe

[Dale]

Eddie Mihalow Jr wrote:
> Unsubscribe
>

Give this a try instead:

List-Unsubscribe: <mailto:gentoo-desktop+unsubscribe@lists.gentoo.org>

Dale

:-)  :-)  

-- 
I am only responsible for what I said ... Not for what you understood or how you interpreted my words!

Re: [gentoo-desktop] Unsubscribe

[Eddie Mihalow Jr]

On 11/27/2012 8:17 AM, Dale wrote:
> Eddie Mihalow Jr wrote:
>> Unsubscribe
>>
> Give this a try instead:
>
> List-Unsubscribe: <mailto:gentoo-desktop+unsubscribe@lists.gentoo.org>
>
> Dale
>
> :-)  :-)
>
Tried to Dale on this email addy and it won't let me. It just keeps 
dragging me back. Worked on the other one though.

-- 
Edward A Mihalow Jr
Mudbug Computers and Networks
Geaux Saints!

[gentoo-desktop] Unsubscribe

[martin Colville]

Re: [gentoo-desktop] Unsubscribe

[Dale]

martin Colville wrote:
>
>
>


Nope.  It doesn't work that way.  Try emailing this addy instead and
then confirming. 

gentoo-desktop+unsubscribe@lists.gentoo.org  

Dale

:-)  :-)  

[gentoo-desktop] unsubscribe

[Im Already Agaainst The Next War...]

unsubscribe

Re: [gentoo-desktop] unsubscribe

[Dale]

Im Already Agaainst The Next War... wrote:
> unsubscribe
>
>

You may have better luck, with this.

List-Unsubscribe: <mailto:gentoo-desktop+unsubscribe@lists.gentoo.org>  

Dale

:-)  :-)