[gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml

public inbox for gentoo-commits@lists.gentoo.org
 help / color / mirror / Atom feed

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2008-05-23 19:40 Sven Vermeulen (swift)
  0 siblings, 0 replies; 24+ messages in thread
From: Sven Vermeulen (swift) @ 2008-05-23 19:40 UTC (permalink / raw
  To: gentoo-commits

swift       08/05/23 19:40:35

  Log:
  
-- 
gentoo-commits@lists.gentoo.org mailing list



^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2008-11-10  7:01 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2008-11-10  7:01 UTC (permalink / raw
  To: gentoo-commits

nightmorph    08/11/10 07:01:00

  Log:
  



^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2009-01-26  8:08 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2009-01-26  8:08 UTC (permalink / raw
  To: gentoo-commits

nightmorph    09/01/26 08:08:31

  Modified:             xorg-config.xml
  Log:
  A little handholding for pebkac users; removed a paragraph just to be sure. bug 254186

Revision  Changes    Path
1.28                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.28&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.28&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.27&r2=1.28

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.27
retrieving revision 1.28
diff -u -r1.27 -r1.28
--- xorg-config.xml	10 Nov 2008 07:01:00 -0000	1.27
+++ xorg-config.xml	26 Jan 2009 08:08:22 -0000	1.28
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.27 2008/11/10 07:01:00 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.28 2009/01/26 08:08:22 nightmorph Exp $ -->
 
 <guide link="/doc/en/xorg-config.xml">
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.18</version>
-<date>2008-11-09</date>
+<version>1.19</version>
+<date>2009-01-26</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -88,16 +88,9 @@
 <chapter>
 <title>Installing Xorg</title>
 <section>
-<title>Using emerge</title>
 <body>
 
 <p>
-Enough chitchat, let's get to business shall we? To install Xorg, you just
-need to run <c>emerge xorg-x11</c>. Installing Xorg does take a while
-though, so you might want to grab a snack while you are waiting.
-</p>
-
-<p>
 Before installing Xorg you have to configure two important variables in the
 <path>/etc/make.conf</path> file.
 </p>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2009-06-10 18:28 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2009-06-10 18:28 UTC (permalink / raw
  To: gentoo-commits

nightmorph    09/06/10 18:28:54

  Modified:             xorg-config.xml
  Log:
  recommend xorg-server, not xorg-x11, as the more recent versions that will be stabilized bring in a spamload of international alphabets and fonts. totally useless for a working desktop.

Revision  Changes    Path
1.30                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.30&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.30&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.29&r2=1.30

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.29
retrieving revision 1.30
diff -u -r1.29 -r1.30
--- xorg-config.xml	15 Apr 2009 06:48:50 -0000	1.29
+++ xorg-config.xml	10 Jun 2009 18:28:53 -0000	1.30
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.29 2009/04/15 06:48:50 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.30 2009/06/10 18:28:53 nightmorph Exp $ -->
 
 <guide link="/doc/en/xorg-config.xml">
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.20</version>
-<date>2009-04-14</date>
+<version>1.21</version>
+<date>2009-06-10</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -168,9 +168,17 @@
 </p>
 
 <pre caption="Installing Xorg">
-# <i>emerge xorg-x11</i>
+# <i>emerge xorg-server</i>
 </pre>
 
+<note>
+You could install the <c>xorg-x11</c> metapackage instead of the more
+lightweight xorg-server. Functionally, <c>xorg-x11</c> and <c>xorg-server</c>
+are the same. However, <c>xorg-x11</c> brings in many more packages that
+you probably don't need, such as a huge assortment of fonts in many different
+languages. They're not necessary for a working desktop.
+</note>
+
 <p>
 When the installation is finished, you might need to re-initialise some
 environment variables before you continue. Just run <c>env-update</c> followed
@@ -192,11 +200,11 @@
 <body>
 
 <p>
-The configuration file of Xorg is called <path>xorg.conf</path> and it
-resides in <path>/etc/X11</path>. The Xorg-X11 package provides an example
-configuration as <path>/etc/X11/xorg.conf.example</path> which you can use to
-create your own configuration. It is heavily commented, but if you are in need
-of more documentation regarding the syntax, don't hesitate to read the man page:
+The configuration file of Xorg is called <path>xorg.conf</path> and it resides
+in <path>/etc/X11</path>. Xorg provides an example configuration as
+<path>/etc/X11/xorg.conf.example</path> which you can use to create your own
+configuration. It is heavily commented, but if you are in need of more
+documentation regarding the syntax, don't hesitate to read the man page:
 </p>
 
 <pre caption="Reading the xorg.conf man page">






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2009-10-02  7:37 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2009-10-02  7:37 UTC (permalink / raw
  To: gentoo-commits

nightmorph    09/10/02 07:37:58

  Modified:             xorg-config.xml
  Log:
  The first of many rewrites I'll be making to the guide to bring it up to stable xserver 1.6 standards. bug 229769

Revision  Changes    Path
1.31                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.31&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.31&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.30&r2=1.31

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.30
retrieving revision 1.31
diff -u -r1.30 -r1.31
--- xorg-config.xml	10 Jun 2009 18:28:53 -0000	1.30
+++ xorg-config.xml	2 Oct 2009 07:37:57 -0000	1.31
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.30 2009/06/10 18:28:53 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.31 2009/10/02 07:37:57 nightmorph Exp $ -->
 
 <guide link="/doc/en/xorg-config.xml">
 <title>The X Server Configuration HOWTO</title>
@@ -8,7 +8,7 @@
 <author title="Author">
   <mail link="swift@gentoo.org">Sven Vermeulen</mail>
 </author>
-<author title="Editor">
+<author title="Author">
   <mail link="nightmorph"/>
 </author>
 
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.21</version>
-<date>2009-06-10</date>
+<version>1.22</version>
+<date>2009-10-02</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -320,8 +320,11 @@
   <li>
     Otherwise, it will read the value of the XSESSION variable and will execute
     one of the sessions available in <path>/etc/X11/Sessions/</path>
-    accordingly (you can set the value of XSESSION in <path>/etc/rc.conf</path>
-    to make it a default for all the users on the system).
+    accordingly. You can set the value of XSESSION in
+    <path>/etc/env.d/90xsession</path> to make it a default for all the users on
+    the system. For example, as root, run <c>echo XSESSION="Xfce4" >
+    /etc/env.d/90xsession</c>. This will create the <path>90xsession</path> file
+    and set the default X session to Xfce4.
   </li>
   <li>
     If all of the above fail, it will fall back to a simple window manager,






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2009-12-09  1:35 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2009-12-09  1:35 UTC (permalink / raw
  To: gentoo-commits

nightmorph    09/12/09 01:35:03

  Modified:             xorg-config.xml
  Log:
  The big Xorg HOWOTO rewrite. This should take into account all the xserver 1.5 and 1.6 changes. I emphasized HAL/evdev for device management and configuration. xorg.conf is really only used as a last resort for things like display resolution. bug 267769.

Revision  Changes    Path
1.32                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.32&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.32&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.31&r2=1.32

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.31
retrieving revision 1.32
diff -u -r1.31 -r1.32
--- xorg-config.xml	2 Oct 2009 07:37:57 -0000	1.31
+++ xorg-config.xml	9 Dec 2009 01:35:03 -0000	1.32
@@ -1,8 +1,8 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.31 2009/10/02 07:37:57 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.32 2009/12/09 01:35:03 nightmorph Exp $ -->
 
-<guide link="/doc/en/xorg-config.xml">
+<guide>
 <title>The X Server Configuration HOWTO</title>
 
 <author title="Author">
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.22</version>
-<date>2009-10-02</date>
+<version>1.23</version>
+<date>2009-12-08</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -88,31 +88,53 @@
 <chapter>
 <title>Installing Xorg</title>
 <section>
+<title>Kernel configuration</title>
 <body>
 
 <p>
-Before installing Xorg you have to configure two important variables in the
+By default, Xorg uses <c>evdev</c>, a generic input driver. You'll need to
+activate support for <c>evdev</c> by making a change to your kernel
+configuration. (Read the
+<uri link="/doc/en/kernel-config.xml">Kernel Configuration Guide</uri> if you
+don't know how to setup your kernel.)
+</p>
+
+<pre caption="Enabling evdev in the kernel">
+Device Drivers ---&gt;
+  Input device support ---&gt;
+  &lt;*&gt;  Event interface
+</pre>
+
+</body>
+</section>
+<section>
+<title>make.conf configuration</title>
+<body>
+
+<p>
+Before you install Xorg, you have to configure two important variables in the
 <path>/etc/make.conf</path> file.
 </p>
 
 <p>
-The first one is <c>VIDEO_CARDS</c>. This is used to set the video drivers that
-you intend to use and is usually based on the kind and brand of card you have.
-The most common settings are <c>nvidia</c> for Nvidia cards or <c>fglrx</c> for
-ATI Radeon cards. Those are the proprietary drivers from Nvidia and ATI
-respectively. If you would like to use the open source versions, use <c>nv</c>
-rather than <c>nvidia</c> in the variable, but bear in mind that using this
-driver means no 3D acceleration at all. The free <c>radeon</c> and
-<c>radeonhd</c> drivers for ATI cards support 3D acceleration on older Radeons
-but don't yet support all the features of the newer ones. <c>VIDEO_CARDS</c> may
-contain more than one driver, in this case list of them should be separated with
-spaces.
+The first variable is <c>VIDEO_CARDS</c>. This is used to set the video drivers
+that you intend to use and is usually based on the kind and brand of card you
+have. The most common settings are <c>nvidia</c> for Nvidia cards or
+<c>fglrx</c> for ATI Radeon cards. Those are the proprietary drivers from Nvidia
+and ATI respectively. If you would like to use the open source nVidia driver,
+use <c>nv</c> rather than <c>nvidia</c> in the variable, but bear in mind that
+using this driver means no 3D acceleration at all. The free <c>radeon</c> and
+<c>radeonhd</c> drivers are available for ATI cards, and are more or less the
+equal of the proprietary <c>fglrx</c> driver. The <c>intel</c> driver may be
+used for desktops or laptops with common Intel integrated graphics chipsets.
+<c>VIDEO_CARDS</c> may contain more than one driver, in this case list of them
+should be separated with spaces.
 </p>
 
 <p>
 The second variable is <c>INPUT_DEVICES</c> and is used to determine which
 drivers are to be built for input devices. In most cases setting it to
-<c>keyboard mouse</c> should work just fine. If you use alternative input
+<c>evdev</c> should work just fine. If you use alternative input
 devices, such as a Synaptics touchpad for a laptop, be sure to add it to
 <c>INPUT_DEVICES</c>.
 </p>
@@ -123,27 +145,27 @@
 </p>
 
 <pre caption="Sample make.conf entries">
-<comment>(For mouse and keyboard support)</comment>
-INPUT_DEVICES="keyboard mouse"
+<comment>(For mouse, keyboard, and Synaptics touchpad support)</comment>
+INPUT_DEVICES="evdev synaptics"
 <comment>(For Nvidia cards)</comment>
 VIDEO_CARDS="nvidia"
 <comment>(OR, for ATI Radeon cards)</comment>
-VIDEO_CARDS="fglrx"
+VIDEO_CARDS="radeon"
 </pre>
 
-<p>
-More instructions on how to configure nVidia and ATI cards can be found in
-<uri link="/doc/en/nvidia-guide.xml">Gentoo Linux nVidia Guide</uri> and in
+<note>
+More instructions on how to configure nVidia and ATI cards can be found in the
+<uri link="/doc/en/nvidia-guide.xml">Gentoo Linux nVidia Guide</uri> and in the
 <uri link="/doc/en/ati-faq.xml">Gentoo Linux ATI FAQ</uri>. If you don't know
 which drivers you should choose, refer to these guides for more information.
-</p>
+</note>
 
-<note>
+<p>
 If the suggested settings don't work for you, you should run <c>emerge -pv
 xorg-server</c>, check all the options available and choose those which apply to
-your system. The example is for the amd64 architecture and
-<c>xorg-server-1.2</c>.
-</note>
+your system. This example is for a system with a keyboard, mouse, Synaptics
+touchpad, and a Radeon video card.
+</p>
 
 <pre caption="Displaying all the driver options available">
 # <i>emerge -pv xorg-server</i>
@@ -151,16 +173,17 @@
 These are the packages that would be merged, in order:
 
 Calculating dependencies... done!
-[ebuild   R   ] x11-base/xorg-server-1.2.0-r3  USE="dri nptl xorg (-3dfx) -debug
--dmx -ipv6 -kdrive -minimal -sdl -xprint" INPUT_DEVICES="keyboard mouse -acecad
--aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev
--fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax
--penmount -spaceorb -summa -synaptics -tek4957 -ur98 -vmmouse -void -wacom"
-VIDEO_CARDS="nvidia -apm -ark -chips -cirrus -cyrix -dummy -epson -fbdev -fglrx
--glint -i128 (-i740) -i810 (-impact) (-imstt) -mach64 -mga -neomagic (-newport)
-(-nsc) -nv -r128 -radeon -rendition -s3 -s3virge -savage -siliconmotion -sis
--sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx)
--tdfx -tga -trident -tseng -v4l -vesa -vga -via -vmware -voodoo" 0 kB
+[ebuild   R   ] x11-base/xorg-server-1.6.3.901-r2  USE="hal nptl xorg -debug
+-dmx -ipv6 -kdrive -minimal -sdl -tslib" 0 kB
+[ebuild   R   ]  x11-base/xorg-drivers-1.6  INPUT_DEVICES="evdev synaptics
+-acecad -aiptek -citron -elographics -fpit -hyperpen -joystick -keyboard -mouse
+-mutouch -penmount -tslib -virtualbox -vmmouse -void -wacom"
+VIDEO_CARDS="radeon -apm -ark -ast -chips -cirrus -dummy -epson -fbdev -fglrx
+(-geode) -glint -i128 (-i740) (-impact) (-imstt) -intel -mach64 -mga -neomagic
+(-newport) -nv -nvidia -r128 -radeonhd -rendition -s3 -s3virge -savage
+-siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb)
+(-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l (-vermilion) -vesa -via
+-virtualbox -vmware (-voodoo) (-xgi)" 0 kB
 </pre>
 
 <p>
@@ -173,14 +196,14 @@
 
 <note>
 You could install the <c>xorg-x11</c> metapackage instead of the more
-lightweight xorg-server. Functionally, <c>xorg-x11</c> and <c>xorg-server</c>
-are the same. However, <c>xorg-x11</c> brings in many more packages that
-you probably don't need, such as a huge assortment of fonts in many different
-languages. They're not necessary for a working desktop.
+lightweight <c>xorg-server</c>. Functionally, <c>xorg-x11</c> and
+<c>xorg-server</c> are the same. However, <c>xorg-x11</c> brings in many more
+packages that you probably don't need, such as a huge assortment of fonts in
+many different languages. They're not necessary for a working desktop.
 </note>
 
 <p>
-When the installation is finished, you might need to re-initialise some
+When the installation is finished, you will need to re-initialise some
 environment variables before you continue. Just run <c>env-update</c> followed
 by <c>source /etc/profile</c> and you're all set.
 </p>
@@ -193,12 +216,126 @@
 </body>
 </section>
 </chapter>
+
 <chapter>
 <title>Configuring Xorg</title>
 <section>
-<title>The xorg.conf File</title>
+<title>Using HAL</title>
+<body>
+
+<p>
+Recent X server versions are designed to work out-of-the-box, with no need to
+manually configure Xorg's configuration files.
+</p>
+
+<p>
+You should first try <uri link="#using_startx">starting X</uri> without creating
+<path>/etc/X11/xorg.conf</path>.
+</p>
+
+<p>
+If Xorg won't start (if there's something wrong with the screen, or with your
+keyboard/mouse), then you can try fixing problems by using the right
+configuration files.
+</p>
+
+<p>
+By default, Xorg uses HAL (Hardware Abstraction Layer) to detect and configure
+devices such as keyboards and mice.
+</p>
+
+<p>
+HAL comes with many premade device rules, also called policies. These policy
+files are available in <path>/usr/share/hal/fdi/policy/</path>. Just find a few
+that suit your needs most closely and copy them to
+<path>/etc/hal/fdi/policy/</path>.
+</p>
+
+<impo>
+Do not edit the files in <path>/usr/share/hal/fdi/</path>! Just copy the ones
+you need, and edit them once they're placed in the proper <path>/etc</path>
+location.
+</impo>
+
+<p>
+For example, to get a basic working keyboard/mouse combination, you could copy
+the following files to <path>/etc/hal/fdi/policy/</path>:
+</p>
+
+<pre caption="Using HAL policy files">
+# <i>cp /usr/share/hal/fdi/policy/10osvendor/10-input-policy.fdi /etc/hal/fdi/policy</i>
+# <i>cp /usr/share/hal/fdi/policy/10osvendor/10-x11-input.fdi /etc/hal/fdi/policy</i>
+</pre>
+
+<p>
+There are several other HAL policies in <path>/usr/share/hal/fdi/</path> that
+may interest you, such as laptop configurations, storage device handling, power
+management, and more. Just copy any of the policies to
+<path>/etc/hal/fdi/policy/</path>.
+</p>
+
+<p>
+You can edit the policy files in <path>/etc/hal/fdi/policy</path> to your
+liking. You may want to make a few tweaks or to expose additional
+functionality. Let's go through an example of tweaking a HAL policy.
+</p>
+
+<p>
+One very convenient trick is to kill the X server entirely by pressing
+Ctrl-Alt-Backspace. This is useful when your X server is malfunctioning, frozen,
+etc. It's not as extreme as rebooting the whole machine with Ctrl-Alt-Del.
+</p>
+
+<p>
+Recent X server versions disabled this key combination by default.  However, you
+can reenable it by copying <path>10-x11-input.fdi</path> to
+<path>/etc/hal/fdi/policy</path> and editing it. You'll need to add just one
+line to the appropriate section, as shown below:
+</p>
+
+<pre caption="Editing 10-x11-input.fdi">
+<comment>(Open the file in your preferred editor)</comment>
+# <i>nano -w /etc/hal/fdi/policy/10-x11-input.fdi</i>
+<comment>(Find the "input.keys" section)</comment>
+&lt;match key="info.capabilities" contains="input.keys"&gt;
+<comment>(Add the "terminate" merge string as shown)</comment>
+&lt;match key="info.capabilities" contains="input.keys"&gt;
+      &lt;merge key="input.x11_driver" type="string"&gt;keyboard&lt;/merge&gt;
+      <i>&lt;merge key="input.xkb.options" type="string"&gt;terminate:ctrl_alt_bksp&lt;/merge>&gt;</i>
+      &lt;match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
+             string="Linux"&gt;
+        &lt;merge key="input.x11_driver" type="string"&gt;evdev&lt;merge&gt;
+      &lt;/match&gt;
+    &lt;/match&gt;
+</pre>
+
+<p>
+There, now you have a handy way of killing an unresponsive X server. This is
+useful when programs have frozen your display entirely, or when configuring and
+tweaking your Xorg environment. Be careful when killing your desktop with this
+key combination -- most programs really don't like it when you end them this
+way, and you may lose some (or all) of what you were working on.
+</p>
+
+<p>
+Hopefully just working with the HAL policy files results in a working X desktop.
+If Xorg still won't start, or there's some other problem, then you'll need to
+manually configure <path>xorg.conf</path> as shown in the next section.
+</p>
+
+</body>
+</section>
+<section>
+<title>The xorg.conf file</title>
 <body>
 
+<note>
+Configuring <path>xorg.conf</path> should be seen as a "last resort" option. It
+really desirable to run without one if possible, and to do all your
+configuration via HAL policy files. If you still can't get a working
+configuration, then read on.
+</note>
+
 <p>
 The configuration file of Xorg is called <path>xorg.conf</path> and it resides
 in <path>/etc/X11</path>. Xorg provides an example configuration as
@@ -208,18 +345,13 @@
 </p>
 
 <pre caption="Reading the xorg.conf man page">
-# <i>man 5 xorg.conf</i>
+$ <i>man 5 xorg.conf</i>
 </pre>
 
-<p>
-Happy reading for those of you willing to. We surely don't so we'll continue
-with checking out how we can create the file automatically.
-</p>
-
 </body>
 </section>
 <section>
-<title>Default: Automatic Generation of xorg.conf</title>
+<title>Automatic Generation of xorg.conf</title>
 <body>
 
 <p>
@@ -248,41 +380,11 @@
 
 <p>
 If all goes well, you should see a simple black and white pattern. Verify if
-your mouse works correctly and if the resolution is good. If you received errors
-about "/dev/mouse", try changing your mouse device to <c>/dev/input/mice</c> in
-the "InputDevice" section of <path>xorg.conf</path>. You might not be able to
-deduce the exact resolution, but you should be able to see if it's too low. You
-can exit any time by pressing Ctrl-Alt-Backspace.
-</p>
-
-</body>
-</section>
-<section>
-<title>Alternative: Semi-Automatic Generation of xorg.conf</title>
-<body>
-
-<p>
-Xorg provides a tool called <c>xorgconfig</c> which will ask you for various
-information regarding your system (graphical adapter, keyboard, ...). Based on
-your input it will create a <path>xorg.conf</path> file.
-</p>
-
-<pre caption="Semi-Automatic Generation of xorg.conf">
-# <i>xorgconfig</i>
-</pre>
-
-<p>
-Another tool, also provided by Xorg, is <c>xorgcfg</c>, which will first
-attempt to run <c>Xorg -configure</c> and then start the X server for more
-final tweaking.
+your mouse works correctly and if the resolution is good. You might not be able
+to deduce the exact resolution, but you should be able to see if it's too low.
+You can exit any time by pressing Ctrl-Alt-Backspace.
 </p>
 
-<pre caption="Using xorgcfg">
-# <i>xorgcfg</i>
-<comment>(In case X crashes or the configuration fails, try:)</comment>
-# <i>xorgcfg -textmode</i>
-</pre>
-
 </body>
 </section>
 <section>
@@ -292,7 +394,7 @@
 <p>
 Let us copy over the <path>xorg.conf.new</path> to
 <path>/etc/X11/xorg.conf</path> now, so we won't have to continuously run
-<c>X -config</c> -- typing just <c>X</c> or <c>startx</c> is easier. :)
+<c>X -config</c> -- typing just <c>startx</c> is easier. :)
 </p>
 
 <pre caption="Copying over xorg.conf">
@@ -306,9 +408,9 @@
 <body>
 
 <p>
-Now try <c>startx</c> to start up your X server.  <c>startx</c> is a script
+Now try <c>startx</c> to start up your X server. <c>startx</c> is a script
 that executes an <e>X session</e>, that is, it starts the X servers and some
-graphical applications on top of it.  It decides which applications to run
+graphical applications on top of it. It decides which applications to run
 using the following logic:
 </p>
 
@@ -341,25 +443,26 @@
 <c>twm</c>. To finish the twm session, type in <c>exit</c> or Ctrl-D in the
 upcoming xterms. You can also kill the X session using the Ctrl-Alt-Backspace
 combination. This will however make X exit disgracefully -- something that you
-might not always want. It doesn't hurt though. :)
+might not always want.
 </p>
 
 </body>
 </section>
 </chapter>
+
 <chapter>
-<title>Tweaking xorg.conf</title>
+<title>Tweaking X settings</title>
 <section>
 <title>Setting your Resolution</title>
 <body>
 
 <p>
 If you feel that the screen resolution is wrong, you will need to check two
-sections in your configuration. First of all, you have the <e>Screen</e> section
-which lists the resolutions, if any that your X server will run at. By
-default, this section might not list any resolutions at all. If this is the
-case, Xorg will estimate the resolutions based on the information in the
-second section, <e>Monitor</e>.
+sections in your <path>xorg.conf</path> configuration. First of all, you have
+the <e>Screen</e> section which lists the resolutions, if any that your X server
+will run at. By default, this section might not list any resolutions at all. If
+this is the case, Xorg will estimate the resolutions based on the information in
+the second section, <e>Monitor</e>.
 </p>
 
 <p>
@@ -367,9 +470,7 @@
 <c>VertRefresh</c> in the <e>Monitor</e> section to compute valid resolutions.
 For now, leave these settings as-is. Only when the changes to the <e>Screen</e>
 section (which we will describe in a minute) don't work, then you will need to
-look up the specs for your monitor and fill in the correct values. You can also
-use a tool that searches for your monitor's specs, such as
-<c>sys-apps/ddcxinfo-knoppix</c>.
+look up the specs for your monitor and fill in the correct values.
 </p>
 
 <warn>
@@ -382,7 +483,7 @@
 <p>
 Now let us change the resolutions. In the next example from
 <path>/etc/X11/xorg.conf</path> we add the <c>Modes</c> lines and the
-<c>DefaultDepth</c> so that our X server starts with 24 bits at 1024x768 by
+<c>DefaultDepth</c> so that our X server starts with 24 bits at 1440x900 by
 default. Don't mind the given strings -- they are examples and will most likely
 differ from the settings on your system.
 </p>
@@ -390,13 +491,13 @@
 <pre caption="Changing the Screen section in /etc/X11/xorg.conf">
 Section "Screen"
   Identifier  "Default Screen"
-  Device    "S3 Inc. ProSavage KN133 [Twister K]"
+  Device    "RadeonHD 4550"
   Monitor   "Generic Monitor"
   <i>DefaultDepth  24</i>
   <comment># Skipping some text to improve readability</comment>
   SubSection "Display"
     Depth   24
-    <i>Modes   "1024x768"</i>
+    <i>Modes   "1440x900"</i>
   EndSubSection
 EndSection
 </pre>
@@ -408,82 +509,47 @@
 </body>
 </section>
 <section>
-<title>Configuring your Keyboard</title>
-<body>
-
-<p>
-To setup X to use an international keyboard, search for the <e>InputDevice</e>
-section that configures the keyboard and add the <c>XkbLayout</c> option to
-point to the keyboard layout you want. As an example, we show you how to apply
-for the Belgian layout. Just substitute the country-keycode with yours:
-</p>
-
-<pre caption="Changing the keyboard layout">
-Section "InputDevice"
-  Identifier  "Generic Keyboard"
-  Driver    "keyboard"
-  Option    "CoreKeyboard"
-  Option    "XkbRules"  "xorg"
-  Option    "XkbModel"  "pc105"
-  <i>Option    "XkbLayout" "be"</i>
-EndSection
-</pre>
-
-</body>
-</section>
-<section>
-<title>Configuring your Mouse</title>
+<title>Configuring your keyboard</title>
 <body>
 
 <p>
-If your mouse isn't working, you will first need to find out if it is detected
-by the kernel at all. Mice are (device-wise) seen as
-<path>/dev/input/mouse0</path> (or <path>/dev/input/mice</path> if you want to
-use several mice). In some cases <path>/dev/psaux</path> is used. In either
-case you can check if the devices do represent
-your mouse by checking the output of those files when you move your mouse. You
-will usually see some junk on your screen. To end the session press
-<c>Ctrl-C</c>.
+To setup X to use an international keyboard, you can copy the content of
+<path>/usr/share/doc/hal-*/*/use-estonian-layout.fdi.bz2</path> to
+<path>/etc/hal/fdi/policy/10-xinput-configuration.fdi</path>:
 </p>
 
-<pre caption="Checking the device files">
-# <i>cat /dev/input/mouse0</i>
-<comment>(Don't forget to press Ctrl-C to end this)</comment>
+<pre caption="Using an existing config file">
+# <i>bzcat /usr/share/doc/hal-*/*/use-estonian-layout.fdi > /etc/hal/fdi/policy/10-xinput-configuration.fdi</i>
 </pre>
 
 <p>
-If your mouse isn't detected, verify if all the necessary modules are loaded.
+Now you can just edit <path>10-xinput-configuration.fdi</path> and change the
+Estonian keyboard layout (<c>ee</c>) to your own, such as Great Britain
+(<b>gb</b>) or Polish (<b>pl</b>).
 </p>
 
 <p>
-If your mouse is detected, fill in the device in the appropriate
-<e>InputDevice</e> section. In the next example you'll see we also set two other
-options: <c>Protocol</c> (which lists the mouse protocol to be used -- most
-users will use PS/2 or IMPS/2) and <c>ZAxisMapping</c> (which allows for the
-mousewheel (if applicable) to be used).
+When you're finished, run <c>/etc/init.d/hald restart</c> as root to make sure
+that HAL picks up your configuration file changes.
 </p>
 
-<pre caption="Changing the mouse settings in Xorg">
-Section "InputDevice"
-  Identifier  "TouchPad Mouse"
-  Driver    "mouse"
-  Option    "CorePointer"
-  <i>Option    "Device"    "/dev/input/mouse0"</i>
-  <i>Option    "Protocol"    "IMPS/2"</i>
-  <i>Option    "ZAxisMapping"    "4 5"</i>
-EndSection
-</pre>
+</body>
+</section>
+<section>
+<title>Finishing up</title>
+<body>
 
 <p>
-Run <c>startx</c> and be happy about the result. :) Congratulations, you now
+Run <c>startx</c> and be happy about the result. Congratulations, you now
 (hopefully) have a working Xorg on your system. The next step is to remove this
-ugly lightweight window manager and use a high-feature one (or even a desktop
-environment) such as KDE or GNOME, but that's not part of this guide. :)
+ugly lightweight window manager (twm) and use a high-feature one (or even a
+desktop environment) such as KDE or GNOME, but that's not part of this guide.
 </p>
 
 </body>
 </section>
 </chapter>
+
 <chapter>
 <title>Resources</title>
 <section>
@@ -491,9 +557,10 @@
 <body>
 
 <p>
-First of all, <c>man xorg.conf</c> provides a quick yet complete reference
-about the syntax used by the configuration file. Be sure to have it open on a
-terminal near you when you edit your configuration file!
+First of all, <c>man xorg.conf</c> and <c>man evdev</c> provide quick yet
+complete references about the syntax used by these configuration files. Be sure
+to have them open on a terminal near you when you edit your configuration
+files!
 </p>
 
 <p>
@@ -510,24 +577,9 @@
 <p>
 There are also many online resources on editing <path>xorg.conf</path>. We only
 list few of them here, be sure to <uri link="http://www.google.com">Google</uri>
-for more. :) As <path>xorg.conf</path> and <path>XF86Config</path> (the
-configuration file for the XFree86 project) use the
-same syntax for most configuration options and more information about
-<path>XF86Config</path> is available, we'll list those resources as well.
+for more.
 </p>
 
-<ul>
-  <li>
-    <uri link="http://tldp.org/HOWTO/XFree-Local-multi-user-HOWTO/">The XFree
-    Local Multi-User HOWTO</uri>
-  </li>
-  <li>
-    <uri
-    link="http://www-106.ibm.com/developerworks/edu/os-dw-linuxxwin-i.html">An
-    Introduction to XFree 4.x</uri> by Chris Houser
-  </li>
-</ul>
-
 </body>
 </section>
 <section>
@@ -542,9 +594,9 @@
 </p>
 
 <p>
-If you're upgrading to xorg-server-1.5 from an earlier version, then be sure to
+If you're upgrading to xorg-server-1.6 from an earlier version, then be sure to
 read the <uri
-link="/proj/en/desktop/x/x11/xorg-server-1.5-upgrade-guide.xml">migration
+link="/proj/en/desktop/x/x11/xorg-server-1.6-upgrade-guide.xml">migration
 guide</uri>.
 </p>
 






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2009-12-17  4:37 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2009-12-17  4:37 UTC (permalink / raw
  To: gentoo-commits

nightmorph    09/12/17 04:37:10

  Modified:             xorg-config.xml
  Log:
  typo fix, bug 297245

Revision  Changes    Path
1.33                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.33&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.33&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.32&r2=1.33

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.32
retrieving revision 1.33
diff -u -r1.32 -r1.33
--- xorg-config.xml	9 Dec 2009 01:35:03 -0000	1.32
+++ xorg-config.xml	17 Dec 2009 04:37:10 -0000	1.33
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.32 2009/12/09 01:35:03 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.33 2009/12/17 04:37:10 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -301,7 +301,7 @@
 <comment>(Add the "terminate" merge string as shown)</comment>
 &lt;match key="info.capabilities" contains="input.keys"&gt;
       &lt;merge key="input.x11_driver" type="string"&gt;keyboard&lt;/merge&gt;
-      <i>&lt;merge key="input.xkb.options" type="string"&gt;terminate:ctrl_alt_bksp&lt;/merge>&gt;</i>
+      <i>&lt;merge key="input.xkb.options" type="string"&gt;terminate:ctrl_alt_bksp&lt;/merge&gt;</i>
       &lt;match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
              string="Linux"&gt;
         &lt;merge key="input.x11_driver" type="string"&gt;evdev&lt;merge&gt;






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2009-12-17  4:41 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2009-12-17  4:41 UTC (permalink / raw
  To: gentoo-commits

nightmorph    09/12/17 04:41:24

  Modified:             xorg-config.xml
  Log:
  more fixes from bug 297245

Revision  Changes    Path
1.34                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.34&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.34&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.33&r2=1.34

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.33
retrieving revision 1.34
diff -u -r1.33 -r1.34
--- xorg-config.xml	17 Dec 2009 04:37:10 -0000	1.33
+++ xorg-config.xml	17 Dec 2009 04:41:24 -0000	1.34
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.33 2009/12/17 04:37:10 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.34 2009/12/17 04:41:24 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.23</version>
-<date>2009-12-08</date>
+<version>1.24</version>
+<date>2009-12-16</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -439,11 +439,8 @@
 </pre>
 
 <p>
-If you see an ugly, loathsome, repulsive, deformed window manager, that's
-<c>twm</c>. To finish the twm session, type in <c>exit</c> or Ctrl-D in the
-upcoming xterms. You can also kill the X session using the Ctrl-Alt-Backspace
-combination. This will however make X exit disgracefully -- something that you
-might not always want.
+You can kill the X session using the Ctrl-Alt-Backspace combination. This will
+however make X exit disgracefully -- something that you might not always want.
 </p>
 
 </body>
@@ -541,9 +538,9 @@
 
 <p>
 Run <c>startx</c> and be happy about the result. Congratulations, you now
-(hopefully) have a working Xorg on your system. The next step is to remove this
-ugly lightweight window manager (twm) and use a high-feature one (or even a
-desktop environment) such as KDE or GNOME, but that's not part of this guide.
+(hopefully) have a working Xorg on your system. The next step is to install a
+useful window manager (or even a desktop environment) such as KDE or GNOME, but
+that's not part of this guide.
 </p>
 
 </body>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2009-12-31  1:37 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2009-12-31  1:37 UTC (permalink / raw
  To: gentoo-commits

nightmorph    09/12/31 01:37:02

  Modified:             xorg-config.xml
  Log:
  Add information about (re)starting hald, per an email from Janne Mäntylä

Revision  Changes    Path
1.35                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.35&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.35&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.34&r2=1.35

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.34
retrieving revision 1.35
diff -u -r1.34 -r1.35
--- xorg-config.xml	17 Dec 2009 04:41:24 -0000	1.34
+++ xorg-config.xml	31 Dec 2009 01:37:01 -0000	1.35
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.34 2009/12/17 04:41:24 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.35 2009/12/31 01:37:01 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.24</version>
-<date>2009-12-16</date>
+<version>1.25</version>
+<date>2009-12-30</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -213,19 +213,32 @@
 # <i>source /etc/profile</i>
 </pre>
 
+<p>
+Now it's time to start the Hardware Abstraction Layer (HAL) daemon and set it to
+automatically start each time you boot. This is necessary to get a working X
+environment, otherwise your input devices won't be detected and you'll probably
+just get a blank screen. We'll cover HAL more in the <uri
+link="#using_hal">next section</uri>.
+</p>
+
+<pre caption="Starting HAL">
+# <i>/etc/init.d/hald start</i>
+# <i>rc-update add hald default</i>
+</pre>
+
 </body>
 </section>
 </chapter>
 
 <chapter>
 <title>Configuring Xorg</title>
-<section>
+<section id="using_hal">
 <title>Using HAL</title>
 <body>
 
 <p>
 Recent X server versions are designed to work out-of-the-box, with no need to
-manually configure Xorg's configuration files.
+manually edit Xorg's configuration files.
 </p>
 
 <p>
@@ -274,6 +287,11 @@
 <path>/etc/hal/fdi/policy/</path>.
 </p>
 
+<impo>
+Remember, <e>every</e> time you finish making changes to HAL policy files, you
+need to restart the HAL daemon by running <c>/etc/init.d/hald restart</c>.
+</impo>
+
 <p>
 You can edit the policy files in <path>/etc/hal/fdi/policy</path> to your
 liking. You may want to make a few tweaks or to expose additional
@@ -310,6 +328,11 @@
 </pre>
 
 <p>
+Once you're done, run <c>/etc/init.d/hald restart</c> so that HAL picks up your
+changes.
+</p>
+
+<p>
 There, now you have a handy way of killing an unresponsive X server. This is
 useful when programs have frozen your display entirely, or when configuring and
 tweaking your Xorg environment. Be careful when killing your desktop with this






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2010-01-02  3:02 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-01-02  3:02 UTC (permalink / raw
  To: gentoo-commits

nightmorph    10/01/02 03:02:41

  Modified:             xorg-config.xml
  Log:
  Latest stable xinit (1.2 and up) no longer install TWM, xterm, or xclock, so don't mention assume they're present

Revision  Changes    Path
1.36                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.36&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.36&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.35&r2=1.36

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.35
retrieving revision 1.36
diff -u -r1.35 -r1.36
--- xorg-config.xml	31 Dec 2009 01:37:01 -0000	1.35
+++ xorg-config.xml	2 Jan 2010 03:02:40 -0000	1.36
@@ -1,12 +1,12 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.35 2009/12/31 01:37:01 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.36 2010/01/02 03:02:40 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
 
 <author title="Author">
-  <mail link="swift@gentoo.org">Sven Vermeulen</mail>
+  <mail link="swift"/>
 </author>
 <author title="Author">
   <mail link="nightmorph"/>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.25</version>
-<date>2009-12-30</date>
+<version>1.26</version>
+<date>2010-01-01</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -451,10 +451,6 @@
     /etc/env.d/90xsession</c>. This will create the <path>90xsession</path> file
     and set the default X session to Xfce4.
   </li>
-  <li>
-    If all of the above fail, it will fall back to a simple window manager,
-    usually <c>twm</c>.
-  </li>
 </ul>
 
 <pre caption="Starting X">






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2010-03-16 20:07 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-03-16 20:07 UTC (permalink / raw
  To: gentoo-commits

nightmorph    10/03/16 20:07:44

  Modified:             xorg-config.xml
  Log:
  added the -retro option per bug 267769. also added a bit on installing twm and xterm only for testing purposes, since otherwise startx will just display a black screen. having a few open xterm windows makes it easier to verify that X is setup correctly.

Revision  Changes    Path
1.37                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.37&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.37&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.36&r2=1.37

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.36
retrieving revision 1.37
diff -u -r1.36 -r1.37
--- xorg-config.xml	2 Jan 2010 03:02:40 -0000	1.36
+++ xorg-config.xml	16 Mar 2010 20:07:43 -0000	1.37
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.36 2010/01/02 03:02:40 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.37 2010/03/16 20:07:43 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.26</version>
-<date>2010-01-01</date>
+<version>1.27</version>
+<date>2010-03-16</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -398,7 +398,7 @@
 </p>
 
 <pre caption="Testing the xorg.conf.new file">
-# <i>X -config /root/xorg.conf.new</i>
+# <i>X -config -retro /root/xorg.conf.new</i>
 </pre>
 
 <p>
@@ -454,12 +454,27 @@
 </ul>
 
 <pre caption="Starting X">
-# <i>startx</i>
+$ <i>startx</i>
 </pre>
 
 <p>
-You can kill the X session using the Ctrl-Alt-Backspace combination. This will
-however make X exit disgracefully -- something that you might not always want.
+You can kill the X session by using the Ctrl-Alt-Backspace combination. This
+will, however, make X exit disgracefully -- something that you might not always
+want.
+</p>
+
+<p>
+If you haven't yet installed a window manager, all you'll see is a black screen.
+Since this can also be a sign that something's wrong, you may want to emerge
+<c>twm</c> and <c>xterm</c> <e>only to test X</e>.
+</p>
+
+<p>
+Once those two programs are installed, run <c>startx</c> again. A few xterm
+windows should appear, making it easier to verify that X is working correctly.
+Once you're satisfied with the results, run <c>emerge --unmerge twm xterm</c> as
+root to get rid of the testing packages. You won't need them once you've setup a
+proper desktop environment.
 </p>
 
 </body>
@@ -519,7 +534,7 @@
 </pre>
 
 <p>
-Run X (<c>startx</c>) to discover it uses the resolution you want. :)
+Run X (<c>startx</c>) to discover it uses the resolution you want.
 </p>
 
 </body>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2010-05-23 21:29 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-05-23 21:29 UTC (permalink / raw
  To: gentoo-commits

nightmorph    10/05/23 21:29:35

  Modified:             xorg-config.xml
  Log:
  Fix estonian layout bzcat command, bug 321093

Revision  Changes    Path
1.38                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.38&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.38&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.37&r2=1.38

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.37
retrieving revision 1.38
diff -u -r1.37 -r1.38
--- xorg-config.xml	16 Mar 2010 20:07:43 -0000	1.37
+++ xorg-config.xml	23 May 2010 21:29:35 -0000	1.38
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.37 2010/03/16 20:07:43 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.38 2010/05/23 21:29:35 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.27</version>
-<date>2010-03-16</date>
+<version>1.28</version>
+<date>2010-05-23</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -550,7 +550,7 @@
 </p>
 
 <pre caption="Using an existing config file">
-# <i>bzcat /usr/share/doc/hal-*/*/use-estonian-layout.fdi > /etc/hal/fdi/policy/10-xinput-configuration.fdi</i>
+# <i>bzcat /usr/share/doc/hal-*/*/use-estonian-layout.fdi.bz2 > /etc/hal/fdi/policy/10-xinput-configuration.fdi</i>
 </pre>
 
 <p>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2010-05-23 21:31 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-05-23 21:31 UTC (permalink / raw
  To: gentoo-commits

nightmorph    10/05/23 21:31:50

  Modified:             xorg-config.xml
  Log:
  fix commandline order, bug 321223

Revision  Changes    Path
1.39                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.39&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.39&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.38&r2=1.39

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.38
retrieving revision 1.39
diff -u -r1.38 -r1.39
--- xorg-config.xml	23 May 2010 21:29:35 -0000	1.38
+++ xorg-config.xml	23 May 2010 21:31:50 -0000	1.39
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.38 2010/05/23 21:29:35 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.39 2010/05/23 21:31:50 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,7 +22,7 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.28</version>
+<version>1.29</version>
 <date>2010-05-23</date>
 
 <chapter>
@@ -398,7 +398,7 @@
 </p>
 
 <pre caption="Testing the xorg.conf.new file">
-# <i>X -config -retro /root/xorg.conf.new</i>
+# <i>X -retro -config /root/xorg.conf.new</i>
 </pre>
 
 <p>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2010-08-29  3:39 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-08-29  3:39 UTC (permalink / raw
  To: gentoo-commits

nightmorph    10/08/29 03:39:55

  Modified:             xorg-config.xml
  Log:
  rewrite X guide for KMS, open-source drivers, and whatnot. inspired by bug 328001.

Revision  Changes    Path
1.40                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.40&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.40&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.39&r2=1.40

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.39
retrieving revision 1.40
diff -u -r1.39 -r1.40
--- xorg-config.xml	23 May 2010 21:31:50 -0000	1.39
+++ xorg-config.xml	29 Aug 2010 03:39:55 -0000	1.40
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.39 2010/05/23 21:31:50 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.40 2010/08/29 03:39:55 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>1.29</version>
-<date>2010-05-23</date>
+<version>2</version>
+<date>2010-08-28</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -34,8 +34,8 @@
 <p>
 The average user may be frightened at the thought of having to type in commands.
 Why wouldn't he be able to point and click his way through the freedom provided
-by Gentoo (and Linux in general)? Well, *big smile*, of course you are able to
-do this. :-) Linux offers a wide variety of flashy user interfaces and
+by Gentoo (and Linux in general)? Well, of course you are able to
+do this! Linux offers a wide variety of flashy user interfaces and
 environments which you can install on top of your existing installation.
 </p>
 
@@ -88,15 +88,26 @@
 <chapter>
 <title>Installing Xorg</title>
 <section>
-<title>Kernel configuration</title>
+<body>
+
+<p>
+Before you can install Xorg, you need to prepare your system for it. First,
+we'll set up the kernel to support input devices and video cards. Then we'll
+prepare <path>/etc/make.conf</path> so that the right drivers and Xorg packages
+are built and installed.
+</p>
+
+</body>
+</section>
+<section>
+<title>Input driver support</title>
 <body>
 
 <p>
 By default, Xorg uses <c>evdev</c>, a generic input driver. You'll need to
 activate support for <c>evdev</c> by making a change to your kernel
-configuration. (Read the
-<uri link="/doc/en/kernel-config.xml">Kernel Configuration Guide</uri> if you
-don't know how to setup your kernel.)
+configuration. Read the <uri link="/doc/en/kernel-config.xml">Kernel
+Configuration Guide</uri> if you don't know how to setup your kernel.
 </p>
 
 <pre caption="Enabling evdev in the kernel">
@@ -108,29 +119,149 @@
 </body>
 </section>
 <section>
+<title>Kernel modesetting</title>
+<body>
+
+<p>
+Modern open-source video drivers rely on kernel modesetting (KMS). KMS provides
+an improved graphical boot with less flickering, faster user switching, a
+built-in framebuffer console, seamless switching from the console to Xorg, and
+other features. KMS conflicts with legacy framebuffer drivers, which must remain
+<b>disabled</b> in your kernel configuration.
+</p>
+
+<p>
+First, prepare your kernel for KMS. You need to do this step regardless of which
+Xorg video driver you're using.
+</p>
+
+<pre caption="Configuring framebuffers">
+Device Drivers ---&gt;
+  Graphics support ---&gt;
+    Support for frame buffer devices ---&gt;
+    <comment>(Disable all drivers, including VGA, Intel, nVidia, and ATI)</comment>
+
+    <comment>(Further down, enable basic console support. KMS uses this.)</comment>
+    Console display driver support ---&gt;
+      &lt;*&gt;  Framebuffer Console Support
+</pre>
+
+<p>
+Next, configure your kernel to use the proper KMS driver for your video card.
+Intel, nVidia, and ATI are the most common cards, so follow code listing for
+your card below.
+</p>
+
+<p>
+For Intel cards:
+</p>
+
+<pre caption="Intel settings">
+Device Drivers ---&gt;
+  Graphics support ---&gt;
+    /dev/agpgart (AGP Support) ---&gt;
+    &lt;*&gt;  Intel 440LX/BX/GX, I8xx and E7x05 chipset support
+    Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ---&gt;
+    &lt;*&gt;  Intel 830M, 845G, 852GM, 855GM, 865G (i915 driver)
+         i915 driver
+    [*]    Enable modesetting on intel by default
+</pre>
+
+<p>
+For nVidia cards:
+</p>
+
+<pre caption="nVidia settings">
+<comment>(Enable DRM)</comment>
+Device Drivers ---&gt;
+  Graphics support ---&gt;
+  &lt;*&gt;  Direct Rendering Manager ---&gt;
+
+<comment>(Nouveau is currently in the Staging drivers section)</comment>
+Device Drivers ---&gt;
+  Staging drivers ---&gt;
+  [ ]  Exclude Staging drivers from being built
+  &lt;*&gt;    Nouveau (nVidia) cards
+</pre>
+
+<p>
+For newer ATI cards (<uri link="/doc/en/ati-faq.xml">RadeonHD 2000 and
+up</uri>), you will need to emerge <c>radeon-ucode</c>. Once you have installed
+<c>radeon-ucode</c>, configure your kernel as shown:
+</p>
+
+<pre caption="ATI settings">
+<comment>(Setup the kernel to use the radeon-ucode firmware)</comment>
+Device Drivers ---&gt;
+  Generic Driver Options ---&gt;
+  [*]  Include in-kernel firmware blobs in kernel binary
+  <comment># RadeonHD 2000, 3000, and 4000 series cards:</comment>
+  (radeon/R600_rlc.bin radeon/R700_rlc.bin) External firmware blobs
+  <comment># RadeonHD 5000, a.k.a Evergreen, and newer cards:</comment>
+  (radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin
+   radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin
+   radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin
+   radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin 
+   radeon/REDWOOD_rlc.bin) External firmware blobs
+   (/lib/firmware/) Firmware blobs root directory
+
+<comment>(Enable Radeon KMS support)</comment>
+Device Drivers ---&gt;
+  Graphics support ---&gt;
+  &lt;*&gt;  Direct Rendering Manager ---&gt;
+  &lt;*&gt;    ATI Radeon
+  [*]      Enable modesetting on radeon by default
+</pre>
+
+<note>
+Old Radeon cards (X1900 series and older) don't need the <c>radeon-ucode</c>
+package or any firmware configuration. Just enable the Direct Rendering Manager
+and ATI Radeon modesetting.
+</note>
+
+<p>
+Now that you're done setting up KMS, continue with preparing
+<path>/etc/make.conf</path> in the next section.
+</p>
+
+</body>
+</section>
+<section>
 <title>make.conf configuration</title>
 <body>
 
 <p>
-Before you install Xorg, you have to configure two important variables in the
-<path>/etc/make.conf</path> file.
+Now that your kernel is prepared, you have to configure two important variables
+in the <path>/etc/make.conf</path> file before you can install Xorg.
 </p>
 
 <p>
 The first variable is <c>VIDEO_CARDS</c>. This is used to set the video drivers
-that you intend to use and is usually based on the kind and brand of card you
-have. The most common settings are <c>nvidia</c> for Nvidia cards or
-<c>fglrx</c> for ATI Radeon cards. Those are the proprietary drivers from Nvidia
-and ATI respectively. If you would like to use the open source nVidia driver,
-use <c>nv</c> rather than <c>nvidia</c> in the variable, but bear in mind that
-using this driver means no 3D acceleration at all. The free <c>radeon</c> and
-<c>radeonhd</c> drivers are available for ATI cards, and are more or less the
-equal of the proprietary <c>fglrx</c> driver. The <c>intel</c> driver may be
-used for desktops or laptops with common Intel integrated graphics chipsets.
-<c>VIDEO_CARDS</c> may contain more than one driver, in this case list of them
-should be separated with spaces.
+that you intend to use and is usually based on the kind of video card you have.
+The most common settings are <c>nouveau</c> for nVidia cards or <c>radeon</c>
+for ATI cards. Both have actively developed, well-supported open-source
+drivers.
 </p>
 
+<note>
+You may also try the proprietary drivers from nVidia and ATI, <c>nvidia</c> and
+<c>fglrx</c> respectively. However, setting up the proprietary drivers is
+beyond the scope of this guide. Please read the <uri
+link="/doc/en/nvidia-guide.xml">Gentoo Linux nVidia Guide</uri> and <uri
+link="/doc/en/ati-faq.xml">Gentoo Linux ATI FAQ</uri>. If you don't know which
+drivers you should choose, refer to these guides for more information.
+</note>
+
+<p>
+The <c>intel</c> driver may be used for desktops or laptops with common Intel
+integrated graphics chipsets.
+</p>
+
+<note>
+<c>VIDEO_CARDS</c> may contain more than one driver, each separated with a
+space.
+</note>
+
 <p>
 The second variable is <c>INPUT_DEVICES</c> and is used to determine which
 drivers are to be built for input devices. In most cases setting it to
@@ -147,43 +278,34 @@
 <pre caption="Sample make.conf entries">
 <comment>(For mouse, keyboard, and Synaptics touchpad support)</comment>
 INPUT_DEVICES="evdev synaptics"
-<comment>(For Nvidia cards)</comment>
-VIDEO_CARDS="nvidia"
+<comment>(For nVidia cards)</comment>
+VIDEO_CARDS="nouveau"
 <comment>(OR, for ATI Radeon cards)</comment>
 VIDEO_CARDS="radeon"
 </pre>
 
-<note>
-More instructions on how to configure nVidia and ATI cards can be found in the
-<uri link="/doc/en/nvidia-guide.xml">Gentoo Linux nVidia Guide</uri> and in the
-<uri link="/doc/en/ati-faq.xml">Gentoo Linux ATI FAQ</uri>. If you don't know
-which drivers you should choose, refer to these guides for more information.
-</note>
-
 <p>
 If the suggested settings don't work for you, you should run <c>emerge -pv
-xorg-server</c>, check all the options available and choose those which apply to
+xorg-drivers</c>, check all the options available and choose those which apply to
 your system. This example is for a system with a keyboard, mouse, Synaptics
 touchpad, and a Radeon video card.
 </p>
 
 <pre caption="Displaying all the driver options available">
-# <i>emerge -pv xorg-server</i>
+# <i>emerge -pv xorg-drivers</i>
 
 These are the packages that would be merged, in order:
 
 Calculating dependencies... done!
-[ebuild   R   ] x11-base/xorg-server-1.6.3.901-r2  USE="hal nptl xorg -debug
--dmx -ipv6 -kdrive -minimal -sdl -tslib" 0 kB
-[ebuild   R   ]  x11-base/xorg-drivers-1.6  INPUT_DEVICES="evdev synaptics
--acecad -aiptek -citron -elographics -fpit -hyperpen -joystick -keyboard -mouse
--mutouch -penmount -tslib -virtualbox -vmmouse -void -wacom"
+[ebuild   R   ]  x11-base/xorg-drivers-1.8  INPUT_DEVICES="evdev synaptics
+-acecad -aiptek -elographics% -fpit% -joystick -keyboard -mouse -penmount -tslib
+-virtualbox -vmmouse -void -wacom"
 VIDEO_CARDS="radeon -apm -ark -ast -chips -cirrus -dummy -epson -fbdev -fglrx
-(-geode) -glint -i128 (-i740) (-impact) (-imstt) -intel -mach64 -mga -neomagic
-(-newport) -nv -nvidia -r128 -radeonhd -rendition -s3 -s3virge -savage
+(-geode) -glint -i128 (-i740) (-impact) -intel -mach64 -mga -neomagic (-newport)
+-nouveau -nv -nvidia -r128 -radeonhd -rendition -s3 -s3virge -savage
 -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb)
-(-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l (-vermilion) -vesa -via
--virtualbox -vmware (-voodoo) (-xgi)" 0 kB
+(-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vesa -via -virtualbox
+-vmware (-voodoo) (-xgi)" 0 kB
 </pre>
 
 <p>
@@ -237,8 +359,8 @@
 <body>
 
 <p>
-Recent X server versions are designed to work out-of-the-box, with no need to
-manually edit Xorg's configuration files.
+The X server is designed to work out-of-the-box, with no need to manually edit
+Xorg's configuration files.
 </p>
 
 <p>
@@ -432,7 +554,7 @@
 
 <p>
 Now try <c>startx</c> to start up your X server. <c>startx</c> is a script
-that executes an <e>X session</e>, that is, it starts the X servers and some
+that executes an <e>X session</e>, that is, it starts the X server and some
 graphical applications on top of it. It decides which applications to run
 using the following logic:
 </p>
@@ -446,10 +568,11 @@
     Otherwise, it will read the value of the XSESSION variable and will execute
     one of the sessions available in <path>/etc/X11/Sessions/</path>
     accordingly. You can set the value of XSESSION in
-    <path>/etc/env.d/90xsession</path> to make it a default for all the users on
-    the system. For example, as root, run <c>echo XSESSION="Xfce4" >
+    <path>/etc/env.d/90xsession</path> to make it a default for all the users
+    on the system. For example, as root, run <c>echo XSESSION="Xfce4" >
     /etc/env.d/90xsession</c>. This will create the <path>90xsession</path> file
-    and set the default X session to Xfce4.
+    and set the default X session to <uri
+    link="/doc/en/xfce-config.xml">Xfce</uri>.
   </li>
 </ul>
 
@@ -458,7 +581,7 @@
 </pre>
 
 <p>
-You can kill the X session by using the Ctrl-Alt-Backspace combination. This
+You can kill the X session by using the Ctrl-Alt-Backspace key combination. This
 will, however, make X exit disgracefully -- something that you might not always
 want.
 </p>
@@ -512,24 +635,25 @@
 </warn>
 
 <p>
-Now let us change the resolutions. In the next example from
-<path>/etc/X11/xorg.conf</path> we add the <c>Modes</c> lines and the
-<c>DefaultDepth</c> so that our X server starts with 24 bits at 1440x900 by
-default. Don't mind the given strings -- they are examples and will most likely
-differ from the settings on your system.
-</p>
-
-<pre caption="Changing the Screen section in /etc/X11/xorg.conf">
-Section "Screen"
-  Identifier  "Default Screen"
-  Device    "RadeonHD 4550"
-  Monitor   "Generic Monitor"
-  <i>DefaultDepth  24</i>
-  <comment># Skipping some text to improve readability</comment>
-  SubSection "Display"
-    Depth   24
-    <i>Modes   "1440x900"</i>
-  EndSubSection
+Now let us change the resolution. In the next example from
+<path>/etc/X11/xorg.conf</path> we add the <c>PreferredMode</c> line so that our
+X server starts at 1440x900 by default. Don't mind the given strings -- they are
+examples and will most likely differ from the settings on your system. However,
+the <c>Option</c> in the <c>Device</c> section must match the name of your
+monitor (<c>DVI-0</c>), which can be obtained by running <c>xrandr</c>. You'll
+need to <c>emerge xrandr</c> just long enough to get this information. The
+argument after the monitor name (in the <c>Device</c> section) must match the
+<c>Identifier</c> in the <c>Monitor</c> section.
+</p>
+
+<pre caption="Changing the Monitor section in /etc/X11/xorg.conf">
+Section "Device"
+  Identifier  "RadeonHD 4550"
+  Option      "Monitor-DVI-0" "DVI screen"
+EndSection
+Section "Monitor"
+  Identifier  "DVI screen"
+  Option      "PreferredMode" "1440x900"
 EndSection
 </pre>
 
@@ -573,8 +697,8 @@
 <p>
 Run <c>startx</c> and be happy about the result. Congratulations, you now
 (hopefully) have a working Xorg on your system. The next step is to install a
-useful window manager (or even a desktop environment) such as KDE or GNOME, but
-that's not part of this guide.
+useful window manager or desktop environment such as KDE, GNOME, or
+Xfce, but that's not part of this guide.
 </p>
 
 </body>
@@ -625,9 +749,9 @@
 </p>
 
 <p>
-If you're upgrading to xorg-server-1.6 from an earlier version, then be sure to
-read the <uri
-link="/proj/en/desktop/x/x11/xorg-server-1.6-upgrade-guide.xml">migration
+If you're upgrading to <c>xorg-server</c> 1.8 from an earlier version, then be
+sure to read the <uri
+link="/proj/en/desktop/x/x11/xorg-server-1.8-upgrade-guide.xml">migration
 guide</uri>.
 </p>
 






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2010-10-12 23:13 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-10-12 23:13 UTC (permalink / raw
  To: gentoo-commits

nightmorph    10/10/12 23:13:18

  Modified:             xorg-config.xml
  Log:
  Add multiple monitor info, bug 328001

Revision  Changes    Path
1.41                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.41&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.41&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.40&r2=1.41

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.40
retrieving revision 1.41
diff -u -r1.40 -r1.41
--- xorg-config.xml	29 Aug 2010 03:39:55 -0000	1.40
+++ xorg-config.xml	12 Oct 2010 23:13:18 -0000	1.41
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.40 2010/08/29 03:39:55 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.41 2010/10/12 23:13:18 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>2</version>
-<date>2010-08-28</date>
+<version>3</version>
+<date>2010-10-12</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -664,6 +664,37 @@
 </body>
 </section>
 <section>
+<title>Multiple monitors</title>
+<body>
+
+<p>
+You can configure more than one monitor in <path>/etc/X11/xorg.conf</path>. All
+you have to do is give each monitor an identifer, then list its physical
+position, such as "RightOf" or "Above" another monitor. The following example
+shows how to configure a DVI and a VGA monitor, with the VGA monitor as the
+right-hand screen:
+</p>
+
+<pre caption="Configuring multiple monitors in xorg.conf">
+Section "Device"
+  Identifier "RadeonHD 4550"
+  Option     "Monitor-DVI-0" "DVI screen"
+  Option     "Monitor-VGA-0" "VGA screen"
+EndSection
+
+Section "Monitor"
+  Identifier "DVI screen"
+EndSection
+
+Section "Monitor"
+  Identifier "VGA screen"
+  Option     "RightOf" "DVI screen"
+EndSection
+</pre>
+
+</body>
+</section>
+<section>
 <title>Configuring your keyboard</title>
 <body>
 






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2010-10-25  7:38 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2010-10-25  7:38 UTC (permalink / raw
  To: gentoo-commits

nightmorph    10/10/25 07:38:17

  Modified:             xorg-config.xml
  Log:
  update xorg-drivers example for the removal of xf86-video-radeonhd

Revision  Changes    Path
1.42                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.42&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.42&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.41&r2=1.42

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.41
retrieving revision 1.42
diff -u -r1.41 -r1.42
--- xorg-config.xml	12 Oct 2010 23:13:18 -0000	1.41
+++ xorg-config.xml	25 Oct 2010 07:38:17 -0000	1.42
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.41 2010/10/12 23:13:18 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.42 2010/10/25 07:38:17 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>3</version>
-<date>2010-10-12</date>
+<version>4</version>
+<date>2010-10-25</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -297,15 +297,15 @@
 These are the packages that would be merged, in order:
 
 Calculating dependencies... done!
-[ebuild   R   ]  x11-base/xorg-drivers-1.8  INPUT_DEVICES="evdev synaptics
+[ebuild   R   ]  x11-base/xorg-drivers-1.9  INPUT_DEVICES="evdev synaptics
 -acecad -aiptek -elographics% -fpit% -joystick -keyboard -mouse -penmount -tslib
 -virtualbox -vmmouse -void -wacom"
 VIDEO_CARDS="radeon -apm -ark -ast -chips -cirrus -dummy -epson -fbdev -fglrx
 (-geode) -glint -i128 (-i740) (-impact) -intel -mach64 -mga -neomagic (-newport)
--nouveau -nv -nvidia -r128 -radeonhd -rendition -s3 -s3virge -savage
--siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb)
-(-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vesa -via -virtualbox
--vmware (-voodoo) (-xgi)" 0 kB
+-nouveau -nv -nvidia -r128 -rendition -s3 -s3virge -savage -siliconmotion -sis
+-sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx)
+-tdfx -tga -trident -tseng -v4l -vesa -via -virtualbox -vmware (-voodoo) (-xgi)"
+0 kB
 </pre>
 
 <p>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2011-03-02  7:17 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2011-03-02  7:17 UTC (permalink / raw
  To: gentoo-commits

nightmorph    11/03/02 07:17:39

  Modified:             xorg-config.xml
  Log:
  add firmware for RadeonHD 5000 and 6000 cards, bug 352030

Revision  Changes    Path
1.43                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.43&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.43&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.42&r2=1.43

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.42
retrieving revision 1.43
diff -u -r1.42 -r1.43
--- xorg-config.xml	25 Oct 2010 07:38:17 -0000	1.42
+++ xorg-config.xml	2 Mar 2011 07:17:38 -0000	1.43
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.42 2010/10/25 07:38:17 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.43 2011/03/02 07:17:38 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>4</version>
-<date>2010-10-25</date>
+<version>5</version>
+<date>2011-03-01</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -203,6 +203,14 @@
    radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin
    radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin 
    radeon/REDWOOD_rlc.bin) External firmware blobs
+  <comment># Radeon HD 6200/6300 aka. Ontario/Zacate:</comment>
+  (radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/SUMO_rlc.bin) External
+   firmware blobs
+  <comment># Radeon HD 6400-6900 aka. Northern Islands:</comment>
+  (radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin
+   radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin
+   radeon/CAICOS_pfp.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin
+   radeon/TURKS_pfp.bin) External firmware blobs
    (/lib/firmware/) Firmware blobs root directory
 
 <comment>(Enable Radeon KMS support)</comment>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2011-03-02  8:16 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2011-03-02  8:16 UTC (permalink / raw
  To: gentoo-commits

nightmorph    11/03/02 08:16:44

  Modified:             xorg-config.xml
  Log:
  additional env-update reminder after editing 90xsession, bug 351370

Revision  Changes    Path
1.44                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.44&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.44&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.43&r2=1.44

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.43
retrieving revision 1.44
diff -u -r1.43 -r1.44
--- xorg-config.xml	2 Mar 2011 07:17:38 -0000	1.43
+++ xorg-config.xml	2 Mar 2011 08:16:43 -0000	1.44
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.43 2011/03/02 07:17:38 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.44 2011/03/02 08:16:43 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>5</version>
-<date>2011-03-01</date>
+<version>6</version>
+<date>2011-03-02</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -580,7 +580,8 @@
     on the system. For example, as root, run <c>echo XSESSION="Xfce4" >
     /etc/env.d/90xsession</c>. This will create the <path>90xsession</path> file
     and set the default X session to <uri
-    link="/doc/en/xfce-config.xml">Xfce</uri>.
+    link="/doc/en/xfce-config.xml">Xfce</uri>. Remember to run <c>env-update</c>
+    after changing <path>90xsession</path>.
   </li>
 </ul>
 






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2011-03-23  9:03 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2011-03-23  9:03 UTC (permalink / raw
  To: gentoo-commits

nightmorph    11/03/23 09:03:52

  Modified:             xorg-config.xml
  Log:
  update Xorg guide for the HAL removal. this took many hours, spread out over many weeks. there may still be a few things to add, but this will do as a working basic installation/walkthrough. bug 349698.

Revision  Changes    Path
1.45                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.45&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.45&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.44&r2=1.45

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.44
retrieving revision 1.45
diff -u -r1.44 -r1.45
--- xorg-config.xml	2 Mar 2011 08:16:43 -0000	1.44
+++ xorg-config.xml	23 Mar 2011 09:03:51 -0000	1.45
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.44 2011/03/02 08:16:43 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.45 2011/03/23 09:03:51 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>6</version>
-<date>2011-03-02</date>
+<version>7</version>
+<date>2011-03-23</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -148,7 +148,7 @@
 
 <p>
 Next, configure your kernel to use the proper KMS driver for your video card.
-Intel, nVidia, and ATI are the most common cards, so follow code listing for
+Intel, nVidia, and AMD/ATI are the most common cards, so follow code listing for
 your card below.
 </p>
 
@@ -185,12 +185,12 @@
 </pre>
 
 <p>
-For newer ATI cards (<uri link="/doc/en/ati-faq.xml">RadeonHD 2000 and
+For newer AMD/ATI cards (<uri link="/doc/en/ati-faq.xml">RadeonHD 2000 and
 up</uri>), you will need to emerge <c>radeon-ucode</c>. Once you have installed
 <c>radeon-ucode</c>, configure your kernel as shown:
 </p>
 
-<pre caption="ATI settings">
+<pre caption="AMD/ATI settings">
 <comment>(Setup the kernel to use the radeon-ucode firmware)</comment>
 Device Drivers ---&gt;
   Generic Driver Options ---&gt;
@@ -252,8 +252,8 @@
 </p>
 
 <note>
-You may also try the proprietary drivers from nVidia and ATI, <c>nvidia</c> and
-<c>fglrx</c> respectively. However, setting up the proprietary drivers is
+You may also try the proprietary drivers from nVidia and AMD/ATI, <c>nvidia</c>
+and <c>fglrx</c> respectively. However, setting up the proprietary drivers is
 beyond the scope of this guide. Please read the <uri
 link="/doc/en/nvidia-guide.xml">Gentoo Linux nVidia Guide</uri> and <uri
 link="/doc/en/ati-faq.xml">Gentoo Linux ATI FAQ</uri>. If you don't know which
@@ -288,7 +288,7 @@
 INPUT_DEVICES="evdev synaptics"
 <comment>(For nVidia cards)</comment>
 VIDEO_CARDS="nouveau"
-<comment>(OR, for ATI Radeon cards)</comment>
+<comment>(For AMD/ATI cards)</comment>
 VIDEO_CARDS="radeon"
 </pre>
 
@@ -321,6 +321,9 @@
 </p>
 
 <pre caption="Installing Xorg">
+<comment>(Make sure udev is in your USE flags)</comment>
+# <i>echo "x11-base/xorg-server udev" >> /etc/portage/package.use</i>
+<comment>(Install Xorg)</comment>
 # <i>emerge xorg-server</i>
 </pre>
 
@@ -334,8 +337,7 @@
 
 <p>
 When the installation is finished, you will need to re-initialise some
-environment variables before you continue. Just run <c>env-update</c> followed
-by <c>source /etc/profile</c> and you're all set.
+environment variables before you continue:
 </p>
 
 <pre caption="Re-initialising the environment variables">
@@ -343,216 +345,57 @@
 # <i>source /etc/profile</i>
 </pre>
 
-<p>
-Now it's time to start the Hardware Abstraction Layer (HAL) daemon and set it to
-automatically start each time you boot. This is necessary to get a working X
-environment, otherwise your input devices won't be detected and you'll probably
-just get a blank screen. We'll cover HAL more in the <uri
-link="#using_hal">next section</uri>.
-</p>
-
-<pre caption="Starting HAL">
-# <i>/etc/init.d/hald start</i>
-# <i>rc-update add hald default</i>
-</pre>
-
 </body>
 </section>
 </chapter>
 
 <chapter>
 <title>Configuring Xorg</title>
-<section id="using_hal">
-<title>Using HAL</title>
+<section>
 <body>
 
 <p>
 The X server is designed to work out-of-the-box, with no need to manually edit
-Xorg's configuration files.
-</p>
-
-<p>
-You should first try <uri link="#using_startx">starting X</uri> without creating
-<path>/etc/X11/xorg.conf</path>.
-</p>
-
-<p>
-If Xorg won't start (if there's something wrong with the screen, or with your
-keyboard/mouse), then you can try fixing problems by using the right
-configuration files.
-</p>
-
-<p>
-By default, Xorg uses HAL (Hardware Abstraction Layer) to detect and configure
-devices such as keyboards and mice.
+Xorg's configuration files. It should detect and configure devices such as
+displays, keyboards, and mice.
 </p>
 
 <p>
-HAL comes with many premade device rules, also called policies. These policy
-files are available in <path>/usr/share/hal/fdi/policy/</path>. Just find a few
-that suit your needs most closely and copy them to
-<path>/etc/hal/fdi/policy/</path>.
-</p>
-
-<impo>
-Do not edit the files in <path>/usr/share/hal/fdi/</path>! Just copy the ones
-you need, and edit them once they're placed in the proper <path>/etc</path>
-location.
-</impo>
-
-<p>
-For example, to get a basic working keyboard/mouse combination, you could copy
-the following files to <path>/etc/hal/fdi/policy/</path>:
-</p>
-
-<pre caption="Using HAL policy files">
-# <i>cp /usr/share/hal/fdi/policy/10osvendor/10-input-policy.fdi /etc/hal/fdi/policy</i>
-# <i>cp /usr/share/hal/fdi/policy/10osvendor/10-x11-input.fdi /etc/hal/fdi/policy</i>
-</pre>
-
-<p>
-There are several other HAL policies in <path>/usr/share/hal/fdi/</path> that
-may interest you, such as laptop configurations, storage device handling, power
-management, and more. Just copy any of the policies to
-<path>/etc/hal/fdi/policy/</path>.
-</p>
-
-<impo>
-Remember, <e>every</e> time you finish making changes to HAL policy files, you
-need to restart the HAL daemon by running <c>/etc/init.d/hald restart</c>.
-</impo>
-
-<p>
-You can edit the policy files in <path>/etc/hal/fdi/policy</path> to your
-liking. You may want to make a few tweaks or to expose additional
-functionality. Let's go through an example of tweaking a HAL policy.
-</p>
-
-<p>
-One very convenient trick is to kill the X server entirely by pressing
-Ctrl-Alt-Backspace. This is useful when your X server is malfunctioning, frozen,
-etc. It's not as extreme as rebooting the whole machine with Ctrl-Alt-Del.
-</p>
-
-<p>
-Recent X server versions disabled this key combination by default.  However, you
-can reenable it by copying <path>10-x11-input.fdi</path> to
-<path>/etc/hal/fdi/policy</path> and editing it. You'll need to add just one
-line to the appropriate section, as shown below:
-</p>
-
-<pre caption="Editing 10-x11-input.fdi">
-<comment>(Open the file in your preferred editor)</comment>
-# <i>nano -w /etc/hal/fdi/policy/10-x11-input.fdi</i>
-<comment>(Find the "input.keys" section)</comment>
-&lt;match key="info.capabilities" contains="input.keys"&gt;
-<comment>(Add the "terminate" merge string as shown)</comment>
-&lt;match key="info.capabilities" contains="input.keys"&gt;
-      &lt;merge key="input.x11_driver" type="string"&gt;keyboard&lt;/merge&gt;
-      <i>&lt;merge key="input.xkb.options" type="string"&gt;terminate:ctrl_alt_bksp&lt;/merge&gt;</i>
-      &lt;match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
-             string="Linux"&gt;
-        &lt;merge key="input.x11_driver" type="string"&gt;evdev&lt;merge&gt;
-      &lt;/match&gt;
-    &lt;/match&gt;
-</pre>
-
-<p>
-Once you're done, run <c>/etc/init.d/hald restart</c> so that HAL picks up your
-changes.
-</p>
-
-<p>
-There, now you have a handy way of killing an unresponsive X server. This is
-useful when programs have frozen your display entirely, or when configuring and
-tweaking your Xorg environment. Be careful when killing your desktop with this
-key combination -- most programs really don't like it when you end them this
-way, and you may lose some (or all) of what you were working on.
-</p>
-
-<p>
-Hopefully just working with the HAL policy files results in a working X desktop.
-If Xorg still won't start, or there's some other problem, then you'll need to
-manually configure <path>xorg.conf</path> as shown in the next section.
+You should first try <uri link="#using_startx">starting X</uri> without editing
+any configuration files. If Xorg won't start, or there's some other problem,
+then you'll need to manually configure Xorg as shown in the next section.
 </p>
 
 </body>
 </section>
 <section>
-<title>The xorg.conf file</title>
+<title>The xorg.conf.d directory</title>
 <body>
 
 <note>
-Configuring <path>xorg.conf</path> should be seen as a "last resort" option. It
-really desirable to run without one if possible, and to do all your
-configuration via HAL policy files. If you still can't get a working
-configuration, then read on.
+Configuring files in <path>xorg.conf.d</path> should be seen as a "last resort"
+option. It really desirable to run without any special configuration if
+possible. If you still can't get a working configuration, then read on.
 </note>
 
 <p>
-The configuration file of Xorg is called <path>xorg.conf</path> and it resides
-in <path>/etc/X11</path>. Xorg provides an example configuration as
-<path>/etc/X11/xorg.conf.example</path> which you can use to create your own
-configuration. It is heavily commented, but if you are in need of more
-documentation regarding the syntax, don't hesitate to read the man page:
+The configuration files of Xorg are stored in
+<path>/etc/X11/xorg.conf.d/</path>. Each file is given a unique name and ends in
+<path>.conf</path>. If the filenames start with a number, then Xorg will read
+the files in numeric order. <path>10-evdev.conf</path> will be read before
+<path>20-synaptics.conf</path>, and so on. You don't <e>have</e> to give them
+numbers, but it may help you organize them.
 </p>
 
-<pre caption="Reading the xorg.conf man page">
-$ <i>man 5 xorg.conf</i>
-</pre>
-
-</body>
-</section>
-<section>
-<title>Automatic Generation of xorg.conf</title>
-<body>
-
-<p>
-Xorg itself is able to guess most parameters for you. In most cases, you
-will only have to change some lines to get the resolution you want up and
-running. If you are interested in more in-depth tweaking, be sure to check the
-resources at the end of this chapter. But first, let us generate a (hopefully
-working) Xorg configuration file.
-</p>
-
-<pre caption="Generating an xorg.conf file">
-# <i>Xorg -configure</i>
-</pre>
-
-<p>
-Be sure to read the last lines printed on your screen when Xorg has finished
-probing your hardware. If it tells you it failed at some point, you're forced to
-manually write an <path>xorg.conf</path> file. Assuming that it didn't fail, it
-will have told you that it has written <path>/root/xorg.conf.new</path> ready
-for you to test. So let's test. :)
-</p>
-
-<pre caption="Testing the xorg.conf.new file">
-# <i>X -retro -config /root/xorg.conf.new</i>
-</pre>
-
-<p>
-If all goes well, you should see a simple black and white pattern. Verify if
-your mouse works correctly and if the resolution is good. You might not be able
-to deduce the exact resolution, but you should be able to see if it's too low.
-You can exit any time by pressing Ctrl-Alt-Backspace.
-</p>
-
-</body>
-</section>
-<section>
-<title>Copying over xorg.conf</title>
-<body>
-
-<p>
-Let us copy over the <path>xorg.conf.new</path> to
-<path>/etc/X11/xorg.conf</path> now, so we won't have to continuously run
-<c>X -config</c> -- typing just <c>startx</c> is easier. :)
-</p>
-
-<pre caption="Copying over xorg.conf">
-# <i>cp /root/xorg.conf.new /etc/X11/xorg.conf</i>
-</pre>
+<note>
+Xorg provides example configurations in
+<path>/usr/share/doc/xorg-server-${version}/xorg.conf.example.bz2</path>.  You
+can use these to create your own configuration files in
+<path>/etc/X11/xorg.conf.d/</path>. The examples are heavily commented, but if
+you are in need of more documentation regarding the syntax, read <c>man
+xorg.conf</c>. Other examples can be found in the <uri
+link="#resources">Resources</uri> chapter at the end of this guide.
+</note>
 
 </body>
 </section>
@@ -562,7 +405,7 @@
 
 <p>
 Now try <c>startx</c> to start up your X server. <c>startx</c> is a script
-that executes an <e>X session</e>, that is, it starts the X server and some
+that executes an <e>X session</e>; that is, it starts the X server and some
 graphical applications on top of it. It decides which applications to run
 using the following logic:
 </p>
@@ -590,23 +433,17 @@
 </pre>
 
 <p>
-You can kill the X session by using the Ctrl-Alt-Backspace key combination. This
-will, however, make X exit disgracefully -- something that you might not always
-want.
-</p>
-
-<p>
 If you haven't yet installed a window manager, all you'll see is a black screen.
 Since this can also be a sign that something's wrong, you may want to emerge
 <c>twm</c> and <c>xterm</c> <e>only to test X</e>.
 </p>
 
 <p>
-Once those two programs are installed, run <c>startx</c> again. A few xterm
-windows should appear, making it easier to verify that X is working correctly.
-Once you're satisfied with the results, run <c>emerge --unmerge twm xterm</c> as
-root to get rid of the testing packages. You won't need them once you've setup a
-proper desktop environment.
+Once those two programs are installed, run <c>startx</c> again. A few
+<c>xterm</c> windows should appear, making it easier to verify that X is working
+correctly. Once you're satisfied with the results, run <c>emerge --unmerge twm
+xterm</c> as root to get rid of the testing packages. You won't need them once
+you've setup a proper desktop environment.
 </p>
 
 </body>
@@ -621,41 +458,27 @@
 
 <p>
 If you feel that the screen resolution is wrong, you will need to check two
-sections in your <path>xorg.conf</path> configuration. First of all, you have
-the <e>Screen</e> section which lists the resolutions, if any that your X server
-will run at. By default, this section might not list any resolutions at all. If
-this is the case, Xorg will estimate the resolutions based on the information in
-the second section, <e>Monitor</e>.
+sections in your <path>xorg.conf.d</path> configuration. First of all, you have
+the <e>Screen</e> section which lists the resolutions that your X server will
+run at. This section might not list any resolutions at all. If this is the case,
+Xorg will estimate the resolutions based on the information in the second
+section, <e>Monitor</e>.
 </p>
 
 <p>
-What happens is that Xorg checks the settings of <c>HorizSync</c> and
-<c>VertRefresh</c> in the <e>Monitor</e> section to compute valid resolutions.
-For now, leave these settings as-is. Only when the changes to the <e>Screen</e>
-section (which we will describe in a minute) don't work, then you will need to
-look up the specs for your monitor and fill in the correct values.
-</p>
-
-<warn>
-Do <b>not</b> "just" change the values of these two monitor related variables
-without consulting the technical specifications of your monitor. Setting
-incorrect values lead to out-of-sync errors at best and smoked up screens at
-worst.
-</warn>
-
-<p>
 Now let us change the resolution. In the next example from
-<path>/etc/X11/xorg.conf</path> we add the <c>PreferredMode</c> line so that our
-X server starts at 1440x900 by default. Don't mind the given strings -- they are
-examples and will most likely differ from the settings on your system. However,
-the <c>Option</c> in the <c>Device</c> section must match the name of your
+<path>/etc/X11/xorg.conf.d/40-monitor.conf</path> we add the
+<c>PreferredMode</c> line so that our X server starts at 1440x900 by default.
+The <c>Option</c> in the <c>Device</c> section must match the name of your
 monitor (<c>DVI-0</c>), which can be obtained by running <c>xrandr</c>. You'll
 need to <c>emerge xrandr</c> just long enough to get this information. The
 argument after the monitor name (in the <c>Device</c> section) must match the
 <c>Identifier</c> in the <c>Monitor</c> section.
 </p>
 
-<pre caption="Changing the Monitor section in /etc/X11/xorg.conf">
+<pre caption="Changing the Monitor section">
+# <i>nano -w /etc/X11/xorg.conf.d/40-monitor.conf</i>
+
 Section "Device"
   Identifier  "RadeonHD 4550"
   Option      "Monitor-DVI-0" "DVI screen"
@@ -677,24 +500,24 @@
 <body>
 
 <p>
-You can configure more than one monitor in <path>/etc/X11/xorg.conf</path>. All
-you have to do is give each monitor an identifer, then list its physical
+You can configure more than one monitor in <path>/etc/X11/xorg.conf.d/</path>.
+All you have to do is give each monitor an identifer, then list its physical
 position, such as "RightOf" or "Above" another monitor. The following example
 shows how to configure a DVI and a VGA monitor, with the VGA monitor as the
 right-hand screen:
 </p>
 
-<pre caption="Configuring multiple monitors in xorg.conf">
+<pre caption="Configuring multiple monitors">
+# <i>nano -w /etc/X11/xorg.conf.d/40-monitor.conf</i>
+
 Section "Device"
   Identifier "RadeonHD 4550"
   Option     "Monitor-DVI-0" "DVI screen"
   Option     "Monitor-VGA-0" "VGA screen"
 EndSection
-
 Section "Monitor"
   Identifier "DVI screen"
 EndSection
-
 Section "Monitor"
   Identifier "VGA screen"
   Option     "RightOf" "DVI screen"
@@ -708,24 +531,34 @@
 <body>
 
 <p>
-To setup X to use an international keyboard, you can copy the content of
-<path>/usr/share/doc/hal-*/*/use-estonian-layout.fdi.bz2</path> to
-<path>/etc/hal/fdi/policy/10-xinput-configuration.fdi</path>:
-</p>
-
-<pre caption="Using an existing config file">
-# <i>bzcat /usr/share/doc/hal-*/*/use-estonian-layout.fdi.bz2 > /etc/hal/fdi/policy/10-xinput-configuration.fdi</i>
+To setup X to use an international keyboard, you just have to create the
+appropriate config file in <path>/etc/X11/xorg.conf.d/</path>. This example
+features a Czech keyboard layout:
+</p>
+
+<pre caption="Using an international keyboard">
+# <i>nano -w /etc/X11/xorg.conf.d/30-keyboard.conf</i>
+
+Section "InputClass"
+        Identifier "keyboard-all"
+        Driver "evdev"
+        Option "XkbLayout" "us,cz"
+        Option "XkbModel" "logitech_g15"
+        Option "XkbRules" "xorg"
+        Option "XkbOptions" "grp:alt_shift_toggle,grp:switch,grp_led:scroll,compose:rwin,terminate:ctrl_alt_bksp"
+        Option "XkbVariant" ",qwerty"
+        MatchIsKeyboard "on"
+EndSection
 </pre>
 
 <p>
-Now you can just edit <path>10-xinput-configuration.fdi</path> and change the
-Estonian keyboard layout (<c>ee</c>) to your own, such as Great Britain
-(<b>gb</b>) or Polish (<b>pl</b>).
-</p>
-
-<p>
-When you're finished, run <c>/etc/init.d/hald restart</c> as root to make sure
-that HAL picks up your configuration file changes.
+The "terminate" command (<c>terminate:ctrl_alt_bksp</c>) lets you kill the X
+session by using the Ctrl-Alt-Backspace key combination. This will, however,
+make X exit disgracefully -- something that you might not always want. It can be
+useful when programs have frozen your display entirely, or when you're
+configuring and tweaking your Xorg environment. Be careful when killing your
+desktop with this key combination -- most programs really don't like it when you
+end them this way, and you may lose some (or all) of what you were working on.
 </p>
 
 </body>
@@ -737,42 +570,32 @@
 <p>
 Run <c>startx</c> and be happy about the result. Congratulations, you now
 (hopefully) have a working Xorg on your system. The next step is to install a
-useful window manager or desktop environment such as KDE, GNOME, or
-Xfce, but that's not part of this guide.
+useful window manager or desktop environment such as KDE, GNOME, or Xfce, but
+that's not part of this guide. Information on installing these desktop
+environments can be found in our <uri link="/doc/en/?catid=desktop">Gentoo
+Desktop Documentation Resources</uri>.
 </p>
 
 </body>
 </section>
 </chapter>
 
-<chapter>
+<chapter id="resources">
 <title>Resources</title>
 <section>
-<title>Creating and Tweaking xorg.conf</title>
+<title>Creating and editing config files</title>
 <body>
 
 <p>
 First of all, <c>man xorg.conf</c> and <c>man evdev</c> provide quick yet
 complete references about the syntax used by these configuration files. Be sure
-to have them open on a terminal near you when you edit your configuration
-files!
-</p>
-
-<p>
-Also, be sure to look at <path>/etc/X11/xorg.conf.example</path>; you may wish
-to copy this and use it as a foundation for writing your own
-<path>xorg.conf</path>.
+to have them open on a terminal when you edit your configuration files!
 </p>
 
 <p>
-You may find the X.org <uri link="http://www.x.org/wiki/FAQ">FAQ</uri> provided
-on their website, in addition to their other documentation.
-</p>
-
-<p>
-There are also many online resources on editing <path>xorg.conf</path>. We only
-list few of them here, be sure to <uri link="http://www.google.com">Google</uri>
-for more.
+There are also many online resources on editing config files in
+<path>/etc/X11/</path>. We only list few of them here; be sure to <uri
+link="http://www.google.com">Google</uri> for more.
 </p>
 
 </body>
@@ -789,12 +612,17 @@
 </p>
 
 <p>
-If you're upgrading to <c>xorg-server</c> 1.8 from an earlier version, then be
+If you're upgrading to <c>xorg-server</c> 1.9 from an earlier version, then be
 sure to read the <uri
-link="/proj/en/desktop/x/x11/xorg-server-1.8-upgrade-guide.xml">migration
+link="/proj/en/desktop/x/x11/xorg-server-1.9-upgrade-guide.xml">migration
 guide</uri>.
 </p>
 
+<p>
+X.org provides many <uri link="http://www.x.org/wiki/FAQ">FAQs</uri> on their
+website, in addition to their other documentation.
+</p>
+
 </body>
 </section>
 </chapter>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2011-08-23 14:43 Sven Vermeulen (swift)
  0 siblings, 0 replies; 24+ messages in thread
From: Sven Vermeulen (swift) @ 2011-08-23 14:43 UTC (permalink / raw
  To: gentoo-commits

swift       11/08/23 14:43:41

  Modified:             xorg-config.xml
  Log:
  Fix bug #379391 - Update xorg-config to include firmware information on latest radeon stuff. Thanks to chithanh@g.o for reporting/content

Revision  Changes    Path
1.46                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.46&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.46&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.45&r2=1.46

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.45
retrieving revision 1.46
diff -u -r1.45 -r1.46
--- xorg-config.xml	23 Mar 2011 09:03:51 -0000	1.45
+++ xorg-config.xml	23 Aug 2011 14:43:41 -0000	1.46
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.45 2011/03/23 09:03:51 nightmorph Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.46 2011/08/23 14:43:41 swift Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>7</version>
-<date>2011-03-23</date>
+<version>8</version>
+<date>2011-08-23</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -186,8 +186,9 @@
 
 <p>
 For newer AMD/ATI cards (<uri link="/doc/en/ati-faq.xml">RadeonHD 2000 and
-up</uri>), you will need to emerge <c>radeon-ucode</c>. Once you have installed
-<c>radeon-ucode</c>, configure your kernel as shown:
+up</uri>), you will need to emerge <c>radeon-ucode</c> or
+<c>linux-firmware</c>. Once you have installed one of these packages,
+configure your kernel as shown:
 </p>
 
 <pre caption="AMD/ATI settings">
@@ -203,14 +204,18 @@
    radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin
    radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin 
    radeon/REDWOOD_rlc.bin) External firmware blobs
+  <comment># Radeon HD 6000 series Fusion APUs:</comment>
+  (radeon/PALM_me.bin radeon/PALM_pfp.bin SUMO2_me.bin SUMO2_pfp.bin
+   SUMO_me.bin SUMO_pfp.bin radeon/SUMO_rlc.bin) External firmware blobs
   <comment># Radeon HD 6200/6300 aka. Ontario/Zacate:</comment>
   (radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/SUMO_rlc.bin) External
    firmware blobs
   <comment># Radeon HD 6400-6900 aka. Northern Islands:</comment>
   (radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin
    radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin
-   radeon/CAICOS_pfp.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin
-   radeon/TURKS_pfp.bin) External firmware blobs
+   radeon/CAICOS_pfp.bin CAYMAN_mc.bin
+   CAYMAN_me.bin CAYMAN_pfp.bin CAYMAN_rlc.bin radeon/TURKS_mc.bin
+   radeon/TURKS_me.bin radeon/TURKS_pfp.bin) External firmware blobs
    (/lib/firmware/) Firmware blobs root directory
 
 <comment>(Enable Radeon KMS support)</comment>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2011-08-23 15:04 Sven Vermeulen (swift)
  0 siblings, 0 replies; 24+ messages in thread
From: Sven Vermeulen (swift) @ 2011-08-23 15:04 UTC (permalink / raw
  To: gentoo-commits

swift       11/08/23 15:04:51

  Modified:             xorg-config.xml
  Log:
  Bug #379391 - Remove Radeon HD 62°00/6300 as this is now part of the 6000 series

Revision  Changes    Path
1.47                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.47&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.47&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.46&r2=1.47

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.46
retrieving revision 1.47
diff -u -r1.46 -r1.47
--- xorg-config.xml	23 Aug 2011 14:43:41 -0000	1.46
+++ xorg-config.xml	23 Aug 2011 15:04:51 -0000	1.47
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.46 2011/08/23 14:43:41 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.47 2011/08/23 15:04:51 swift Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,7 +22,7 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>8</version>
+<version>9</version>
 <date>2011-08-23</date>
 
 <chapter>
@@ -207,9 +207,6 @@
   <comment># Radeon HD 6000 series Fusion APUs:</comment>
   (radeon/PALM_me.bin radeon/PALM_pfp.bin SUMO2_me.bin SUMO2_pfp.bin
    SUMO_me.bin SUMO_pfp.bin radeon/SUMO_rlc.bin) External firmware blobs
-  <comment># Radeon HD 6200/6300 aka. Ontario/Zacate:</comment>
-  (radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/SUMO_rlc.bin) External
-   firmware blobs
   <comment># Radeon HD 6400-6900 aka. Northern Islands:</comment>
   (radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin
    radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2011-09-02 19:07 Sven Vermeulen (swift)
  0 siblings, 0 replies; 24+ messages in thread
From: Sven Vermeulen (swift) @ 2011-09-02 19:07 UTC (permalink / raw
  To: gentoo-commits

swift       11/09/02 19:07:13

  Modified:             xorg-config.xml
  Log:
  Fix #379391 - Prefix bin files with "radeon/" as suggested by kahrl@gmx.net

Revision  Changes    Path
1.48                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.48&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.48&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.47&r2=1.48

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.47
retrieving revision 1.48
diff -u -r1.47 -r1.48
--- xorg-config.xml	23 Aug 2011 15:04:51 -0000	1.47
+++ xorg-config.xml	2 Sep 2011 19:07:12 -0000	1.48
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.47 2011/08/23 15:04:51 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.48 2011/09/02 19:07:12 swift Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>9</version>
-<date>2011-08-23</date>
+<version>10</version>
+<date>2011-09-02</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -205,13 +205,14 @@
    radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin 
    radeon/REDWOOD_rlc.bin) External firmware blobs
   <comment># Radeon HD 6000 series Fusion APUs:</comment>
-  (radeon/PALM_me.bin radeon/PALM_pfp.bin SUMO2_me.bin SUMO2_pfp.bin
-   SUMO_me.bin SUMO_pfp.bin radeon/SUMO_rlc.bin) External firmware blobs
+  (radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/SUMO2_me.bin
+   radeon/SUMO2_pfp.bin radeon/SUMO_me.bin radeon/SUMO_pfp.bin
+   radeon/SUMO_rlc.bin) External firmware blobs
   <comment># Radeon HD 6400-6900 aka. Northern Islands:</comment>
   (radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin
    radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin
-   radeon/CAICOS_pfp.bin CAYMAN_mc.bin
-   CAYMAN_me.bin CAYMAN_pfp.bin CAYMAN_rlc.bin radeon/TURKS_mc.bin
+   radeon/CAICOS_pfp.bin radeon/CAYMAN_mc.bin radeon/CAYMAN_me.bin
+   radeon/CAYMAN_pfp.bin radeon/CAYMAN_rlc.bin radeon/TURKS_mc.bin
    radeon/TURKS_me.bin radeon/TURKS_pfp.bin) External firmware blobs
    (/lib/firmware/) Firmware blobs root directory
 






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2012-06-14  6:48 Joshua Saddler (nightmorph)
  0 siblings, 0 replies; 24+ messages in thread
From: Joshua Saddler (nightmorph) @ 2012-06-14  6:48 UTC (permalink / raw
  To: gentoo-commits

nightmorph    12/06/14 06:48:33

  Modified:             xorg-config.xml
  Log:
  update firmware/graphics driver stuff, thanks to chithanh for the patch via bug #419487

Revision  Changes    Path
1.49                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.49&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.49&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.48&r2=1.49

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.48
retrieving revision 1.49
diff -u -r1.48 -r1.49
--- xorg-config.xml	2 Sep 2011 19:07:12 -0000	1.48
+++ xorg-config.xml	14 Jun 2012 06:48:33 -0000	1.49
@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.48 2011/09/02 19:07:12 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.49 2012/06/14 06:48:33 nightmorph Exp $ -->
 
 <guide>
 <title>The X Server Configuration HOWTO</title>
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>10</version>
-<date>2011-09-02</date>
+<version>11</version>
+<date>2012-06-13</date>
 
 <chapter>
 <title>What is the X Window Server?</title>
@@ -162,8 +162,7 @@
     /dev/agpgart (AGP Support) ---&gt;
     &lt;*&gt;  Intel 440LX/BX/GX, I8xx and E7x05 chipset support
     Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ---&gt;
-    &lt;*&gt;  Intel 830M, 845G, 852GM, 855GM, 865G (i915 driver)
-         i915 driver
+    &lt;*&gt;  Intel 8xx/9xx/G3x/G4x/HD Graphics
     [*]    Enable modesetting on intel by default
 </pre>
 
@@ -172,16 +171,10 @@
 </p>
 
 <pre caption="nVidia settings">
-<comment>(Enable DRM)</comment>
 Device Drivers ---&gt;
   Graphics support ---&gt;
-  &lt;*&gt;  Direct Rendering Manager ---&gt;
-
-<comment>(Nouveau is currently in the Staging drivers section)</comment>
-Device Drivers ---&gt;
-  Staging drivers ---&gt;
-  [ ]  Exclude Staging drivers from being built
-  &lt;*&gt;    Nouveau (nVidia) cards
+    Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ---&gt;
+    &lt;*&gt;    Nouveau (nVidia) cards
 </pre>
 
 <p>
@@ -198,22 +191,33 @@
   [*]  Include in-kernel firmware blobs in kernel binary
   <comment># RadeonHD 2000, 3000, and 4000 series cards:</comment>
   (radeon/R600_rlc.bin radeon/R700_rlc.bin) External firmware blobs
-  <comment># RadeonHD 5000, a.k.a Evergreen, and newer cards:</comment>
+  <comment># RadeonHD 5000, a.k.a Evergreen:</comment>
   (radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin
    radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin
    radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin
    radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin 
    radeon/REDWOOD_rlc.bin) External firmware blobs
-  <comment># Radeon HD 6000 series Fusion APUs:</comment>
+  <comment># Radeon HD 6000/7300 series Fusion APUs:</comment>
   (radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/SUMO2_me.bin
    radeon/SUMO2_pfp.bin radeon/SUMO_me.bin radeon/SUMO_pfp.bin
    radeon/SUMO_rlc.bin) External firmware blobs
-  <comment># Radeon HD 6400-6900 aka. Northern Islands:</comment>
+  <comment># Radeon HD 6400-7600 aka. Northern Islands:</comment>
   (radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin
    radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin
    radeon/CAICOS_pfp.bin radeon/CAYMAN_mc.bin radeon/CAYMAN_me.bin
    radeon/CAYMAN_pfp.bin radeon/CAYMAN_rlc.bin radeon/TURKS_mc.bin
    radeon/TURKS_me.bin radeon/TURKS_pfp.bin) External firmware blobs
+  <comment># Radeon HD 7500/7600 series Fusion APUs:</comment>
+  (radeon/ARUBA_me.bin radeon/ARUBA_pfp.bin radeon/ARUBA_rlc.bin)
+   External firmware blobs
+  <comment># Radeon HD 7700-7900 aka. Southern Islands:</comment>
+  (radeon/PITCAIRN_ce.bin radeon/PITCAIRN_mc.bin radeon/PITCAIRN_me.bin
+   radeon/PITCAIRN_pfp.bin radeon/PITCAIRN_rlc.bin radeon/TAHITI_ce.bin
+   radeon/TAHITI_mc.bin radeon/TAHITI_me.bin radeon/TAHITI_pfp.bin
+   radeon/TAHITI_rlc.bin radeon/VERDE_ce.bin radeon/VERDE_mc.bin
+   radeon/VERDE_me.bin radeon/VERDE_pfp.bin radeon/VERDE_rlc.bin)
+   External firmware blobs
+  <comment># all:</comment>
    (/lib/firmware/) Firmware blobs root directory
 
 <comment>(Enable Radeon KMS support)</comment>






^ permalink raw reply	[flat|nested] 24+ messages in thread

* [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml
@ 2013-08-01 18:24 Sven Vermeulen (swift)
  0 siblings, 0 replies; 24+ messages in thread
From: Sven Vermeulen (swift) @ 2013-08-01 18:24 UTC (permalink / raw
  To: gentoo-commits

swift       13/08/01 18:24:47

  Modified:             xorg-config.xml
  Log:
  Xorg configuration is now at https://wiki.gentoo.org/wiki/Xorg/Configuration

Revision  Changes    Path
1.52                 xml/htdocs/doc/en/xorg-config.xml

file : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.52&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?rev=1.52&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo/xml/htdocs/doc/en/xorg-config.xml?r1=1.51&r2=1.52

Index: xorg-config.xml
===================================================================
RCS file: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v
retrieving revision 1.51
retrieving revision 1.52
diff -u -r1.51 -r1.52
--- xorg-config.xml	22 Jul 2013 13:23:01 -0000	1.51
+++ xorg-config.xml	1 Aug 2013 18:24:47 -0000	1.52
@@ -1,8 +1,8 @@
 <?xml version='1.0' encoding='UTF-8'?>
 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.51 2013/07/22 13:23:01 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/xorg-config.xml,v 1.52 2013/08/01 18:24:47 swift Exp $ -->
 
-<guide>
+<guide disclaimer="obsolete" redirect="https://wiki.gentoo.org/wiki/Xorg/Configuration">
 <title>The X Server Configuration HOWTO</title>
 
 <author title="Author">
@@ -22,8 +22,8 @@
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 <license/>
 
-<version>13</version>
-<date>2013-07-22</date>
+<version>14</version>
+<date>2013-08-01</date>
 
 <chapter>
 <title>What is the X Window Server?</title>





^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2013-08-01 18:24 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-26  8:08 [gentoo-commits] gentoo commit in xml/htdocs/doc/en: xorg-config.xml Joshua Saddler (nightmorph)
  -- strict thread matches above, loose matches on Subject: below --
2013-08-01 18:24 Sven Vermeulen (swift)
2012-06-14  6:48 Joshua Saddler (nightmorph)
2011-09-02 19:07 Sven Vermeulen (swift)
2011-08-23 15:04 Sven Vermeulen (swift)
2011-08-23 14:43 Sven Vermeulen (swift)
2011-03-23  9:03 Joshua Saddler (nightmorph)
2011-03-02  8:16 Joshua Saddler (nightmorph)
2011-03-02  7:17 Joshua Saddler (nightmorph)
2010-10-25  7:38 Joshua Saddler (nightmorph)
2010-10-12 23:13 Joshua Saddler (nightmorph)
2010-08-29  3:39 Joshua Saddler (nightmorph)
2010-05-23 21:31 Joshua Saddler (nightmorph)
2010-05-23 21:29 Joshua Saddler (nightmorph)
2010-03-16 20:07 Joshua Saddler (nightmorph)
2010-01-02  3:02 Joshua Saddler (nightmorph)
2009-12-31  1:37 Joshua Saddler (nightmorph)
2009-12-17  4:41 Joshua Saddler (nightmorph)
2009-12-17  4:37 Joshua Saddler (nightmorph)
2009-12-09  1:35 Joshua Saddler (nightmorph)
2009-10-02  7:37 Joshua Saddler (nightmorph)
2009-06-10 18:28 Joshua Saddler (nightmorph)
2008-11-10  7:01 Joshua Saddler (nightmorph)
2008-05-23 19:40 Sven Vermeulen (swift)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox