From: "Matsuu Takuto (matsuu)" <matsuu@gentoo.org>
To: gentoo-commits@lists.gentoo.org
Subject: [gentoo-commits] gentoo-x86 commit in sys-devel/distcc: ChangeLog distcc-3.0-r4.ebuild
Date: Wed, 05 Nov 2008 22:52:11 +0000 [thread overview]
Message-ID: <E1KxrER-0007U9-Tf@stork.gentoo.org> (raw)
matsuu 08/11/05 22:52:11
Modified: ChangeLog
Added: distcc-3.0-r4.ebuild
Log:
Added GCC_SPECS to init.d, bug #164818. Fixed uninitialized issue, bug #244847. Removed DISTCC_POTENTIAL_HOSTS variable. Added IPv6 elog.
(Portage version: 2.2_rc12/cvs/Linux 2.6.27-gentoo x86_64)
Revision Changes Path
1.181 sys-devel/distcc/ChangeLog
file : http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-devel/distcc/ChangeLog?rev=1.181&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-devel/distcc/ChangeLog?rev=1.181&content-type=text/plain
diff : http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-devel/distcc/ChangeLog?r1=1.180&r2=1.181
Index: ChangeLog
===================================================================
RCS file: /var/cvsroot/gentoo-x86/sys-devel/distcc/ChangeLog,v
retrieving revision 1.180
retrieving revision 1.181
diff -u -r1.180 -r1.181
--- ChangeLog 2 Nov 2008 22:24:23 -0000 1.180
+++ ChangeLog 5 Nov 2008 22:52:11 -0000 1.181
@@ -1,6 +1,18 @@
# ChangeLog for sys-devel/distcc
# Copyright 2000-2008 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-devel/distcc/ChangeLog,v 1.180 2008/11/02 22:24:23 gengor Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-devel/distcc/ChangeLog,v 1.181 2008/11/05 22:52:11 matsuu Exp $
+
+*distcc-3.0-r4 (05 Nov 2008)
+
+ 05 Nov 2008; MATSUU Takuto <matsuu@gentoo.org> files/3.0/init,
+ +files/distcc-3.0-uninitialized.patch, +distcc-3.0-r4.ebuild:
+ Added GCC_SPECS to init.d, bug #164818. Fixed uninitialized issue, bug
+ #244847. Removed DISTCC_POTENTIAL_HOSTS variable. Added IPv6 elog.
+
+ 05 Nov 2008; MATSUU Takuto <matsuu@gentoo.org> files/3.0/init,
+ distcc-3.0-r3.ebuild:
+ Added GCC_SPECS to init.d, bug #164818. Removed DISTCC_POTENTIAL_HOSTS
+ variable. Added IPv6 elog.
02 Nov 2008; Gordon Malm <gengor@gentoo.org> +files/distcc-hardened.patch,
distcc-2.18.3-r10.ebuild, distcc-2.18.3-r13.ebuild, distcc-3.0-r3.ebuild:
1.1 sys-devel/distcc/distcc-3.0-r4.ebuild
file : http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-devel/distcc/distcc-3.0-r4.ebuild?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo-x86/sys-devel/distcc/distcc-3.0-r4.ebuild?rev=1.1&content-type=text/plain
Index: distcc-3.0-r4.ebuild
===================================================================
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-devel/distcc/distcc-3.0-r4.ebuild,v 1.1 2008/11/05 22:52:11 matsuu Exp $
inherit eutils fdo-mime flag-o-matic multilib toolchain-funcs
DESCRIPTION="a program to distribute compilation of C code across several machines on a network"
HOMEPAGE="http://distcc.org/"
SRC_URI="http://distcc.googlecode.com/files/${P}.tar.bz2"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~x86-fbsd"
IUSE="avahi gnome gtk hardened ipv6 selinux xinetd"
RESTRICT="test"
RDEPEND=">=dev-lang/python-2.4
dev-libs/popt
avahi? ( >=net-dns/avahi-0.6 )
gnome? (
>=gnome-base/libgnome-2
>=gnome-base/libgnomeui-2
>=x11-libs/gtk+-2
x11-libs/pango
)
gtk? (
>=x11-libs/gtk+-2
)"
DEPEND="${RDEPEND}
dev-util/pkgconfig"
RDEPEND="${RDEPEND}
!net-misc/pump
>=sys-devel/gcc-config-1.3.1
selinux? ( sec-policy/selinux-distcc )
xinetd? ( sys-apps/xinetd )"
DISTCC_LOG=""
DCCC_PATH="/usr/$(get_libdir)/distcc/bin"
DISTCC_VERBOSE="0"
pkg_setup() {
enewuser distcc 240 -1 -1 daemon
}
src_unpack() {
unpack ${A}
cd "${S}"
epatch "${FILESDIR}/${P}-gentoo.patch"
epatch "${FILESDIR}/${P}-svn617.patch"
epatch "${FILESDIR}/${P}-xinetd.patch"
epatch "${FILESDIR}/${P}-uninitialized.patch"
sed -i -e "/PATH/s:\$distcc_location:${DCCC_PATH}:" pump.in || die
# Bugs #120001, #167844 and probably more. See patch for description.
use hardened && epatch "${FILESDIR}/distcc-hardened.patch"
}
src_compile() {
# More legacy stuff?
[ "$(gcc-major-version)" = "2" ] && filter-lfs-flags
# -O? is required
[ "${CFLAGS/-O}" = "${CFLAGS}" ] && CFLAGS="${CFLAGS} -O2"
econf \
$(use_with avahi) \
$(use_with gtk) \
$(use_with gnome) \
$(use_enable ipv6 rfc2553) \
--with-docdir="/usr/share/doc/${PF}" || die "econf failed"
emake || die "emake failed"
}
src_install() {
emake DESTDIR="${D}" install || die
dobin "${FILESDIR}/${PV}/distcc-config"
newinitd "${FILESDIR}/${PV}/init" distccd
cp "${FILESDIR}/${PV}/conf" "${T}/distccd"
if use avahi; then
cat >> "${T}/distccd" <<-EOF
# Enable zeroconf support in distccd
DISTCCD_OPTS="\${DISTCCD_OPTS} --zeroconf"
EOF
fi
doconfd "${T}/distccd"
cat > "${T}/02distcc" <<-EOF
# This file is managed by distcc-config; use it to change these settings.
DISTCC_LOG="${DISTCC_LOG}"
DCCC_PATH="${DCCC_PATH}"
DISTCC_VERBOSE="${DISTCC_VERBOSE}"
EOF
doenvd "${T}/02distcc"
# create the masquerade directory
dodir "${DCCC_PATH}"
for f in cc c++ gcc g++; do
dosym /usr/bin/distcc "${DCCC_PATH}/${f}"
if [ "${f}" != "cc" ]; then
dosym /usr/bin/distcc "${DCCC_PATH}/${CTARGET:-${CHOST}}-${f}"
fi
done
# create the distccd pid directory
keepdir /var/run/distccd
fowners distcc:daemon /var/run/distccd
if use gnome || use gtk; then
einfo "Renaming /usr/bin/distccmon-gnome to /usr/bin/distccmon-gui"
einfo "This is to have a little sensability in naming schemes between distccmon programs"
mv "${D}/usr/bin/distccmon-gnome" "${D}/usr/bin/distccmon-gui" || die
dosym distccmon-gui /usr/bin/distccmon-gnome
fi
if use xinetd; then
insinto /etc/xinetd.d
newins "doc/example/xinetd" distcc
fi
rm -rf "${D}/etc/default"
rm -f "${D}/etc/distcc/clients.allow"
rm -f "${D}/etc/distcc/commands.allow.sh"
prepalldocs
}
pkg_postinst() {
use gnome && fdo-mime_desktop_database_update
if use ipv6; then
elog
elog "IPv6 has not supported yet by ${P}."
fi
elog
elog "Tips on using distcc with Gentoo can be found at"
elog "http://www.gentoo.org/doc/en/distcc.xml"
elog
elog "How to use pump mode with Gentoo:"
elog "# distcc-config --set-hosts \"foo,cpp,lzo bar,cpp,lzo baz,cpp,lzo\""
elog "# pump emerge -u world"
elog
elog "To use the distccmon programs with Gentoo you should use this command:"
elog "# DISTCC_DIR=\"${DISTCC_DIR}\" distccmon-text 5"
if use gnome || use gtk; then
elog "Or:"
elog "# DISTCC_DIR=\"${DISTCC_DIR}\" distccmon-gnome"
fi
elog
elog "***SECURITY NOTICE***"
elog "If you are upgrading distcc please make sure to run etc-update to"
elog "update your /etc/conf.d/distccd and /etc/init.d/distccd files with"
elog "added security precautions (the --listen and --allow directives)"
elog
}
pkg_postrm() {
use gnome && fdo-mime_desktop_database_update
}
next reply other threads:[~2008-11-05 22:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-05 22:52 Matsuu Takuto (matsuu) [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-11-10 23:21 [gentoo-commits] gentoo-x86 commit in sys-devel/distcc: ChangeLog distcc-3.0-r4.ebuild Matsuu Takuto (matsuu)
2008-12-03 17:21 Brent Baude (ranger)
2008-12-06 18:50 Tobias Scherbaum (dertobi123)
2008-12-09 2:37 Jeroen Roovers (jer)
2008-12-11 22:35 Tobias Klausmann (klausman)
2008-12-12 20:41 Ferris McCormick (fmccor)
2008-12-14 14:03 Thomas Anderson (gentoofan23)
2008-12-14 16:43 Raul Porcel (armin76)
2008-12-19 0:51 Matsuu Takuto (matsuu)
2009-03-13 17:10 Raul Porcel (armin76)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1KxrER-0007U9-Tf@stork.gentoo.org \
--to=matsuu@gentoo.org \
--cc=gentoo-commits@lists.gentoo.org \
--cc=gentoo-dev@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox