* [gentoo-commits] gentoo-x86 commit in net-analyzer/zabbix/files/1.4.5: zabbix_server.conf postinstall-en.txt zabbix_agentd.conf zabbix_agent.conf
@ 2008-03-29 7:05 Wolfram Schlich (wschlich)
0 siblings, 0 replies; 2+ messages in thread
From: Wolfram Schlich (wschlich) @ 2008-03-29 7:05 UTC (permalink / raw
To: gentoo-commits
wschlich 08/03/29 07:05:46
Added: zabbix_server.conf postinstall-en.txt
zabbix_agentd.conf zabbix_agent.conf
Log:
version bump
(Portage version: 2.1.4.4)
Revision Changes Path
1.1 net-analyzer/zabbix/files/1.4.5/zabbix_server.conf
file : http://sources.gentoo.org/viewcvs.py/gentoo-x86/net-analyzer/zabbix/files/1.4.5/zabbix_server.conf?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo-x86/net-analyzer/zabbix/files/1.4.5/zabbix_server.conf?rev=1.1&content-type=text/plain
Index: zabbix_server.conf
===================================================================
# This is config file for ZABBIX server process
# To get more information about ZABBIX,
# go http://www.zabbix.com
############ GENERAL PARAMETERS #################
# This defines which server this is.
# Default value 1
# This parameter must be between 1 and 255
Server=1
# Number of pre-forked instances of pollers
# Default value is 6
# This parameter must be between 6 and 255
StartPollers=6
# Number of pre-forked instances of trappers
# Default value is 5
# This parameter must be between 2 and 255
StartTrappers=5
# Listen interface for trapper. Trapper will listen all network interfaces
# if this parameter is missing.
ListenIP=127.0.0.1
# Listen port for trapping. Default port number is 10051. This parameter
# must be between 1024 and 32767
ListenPort=10051
# How often ZABBIX will perform housekeeping procedure
# (in hours)
# Default value is 1 hour
# Housekeeping is removing unnecessary information from
# tables history, alert, and alarms
# This parameter must be between 1 and 24
HousekeepingFrequency=1
# How often ZABBIX will try to send unsent alerts
# (in seconds)
# Default value is 30 seconds
SenderFrequency=30
# Uncomment this line to disable housekeeping procedure
#DisableHousekeeping=1
# Specifies debug level
# 0 - debug is not created
# 1 - critical information
# 2 - error information
# 3 - warnings (default)
# 4 - for debugging (produces lots of information)
DebugLevel=3
# Specifies how long we wait for agent (in sec)
# Must be between 1 and 30
Timeout=5
# After how many seconds of unreachability treat a host as unavailable
UnreachablePeriod=45
# How ofter check host for availability during the unreachability period
UnavailableDelay=15
# How ofter check host for availability during the unavailability period
UnavailableDelay=60
# Name of PID file
PidFile=/var/run/zabbix/zabbix_server.pid
# Name of log file
# If not set, syslog is used
LogFile=/var/log/zabbix/zabbix_server.log
#Location for custom alert scripts
AlertScriptsPath=/var/lib/zabbix/scripts
#Location of 'fping. Default is /usr/sbin/fping
FpingLocation=/usr/sbin/fping
# Frequency of ICMP pings. Defauls is 30 second.
PingerFrequency=30
# Database host name
# Default is localhost
DBHost=localhost
# Database name
DBName=zabbix
# Database user
DBUser=zabbix
# Database password
# Comment this line if no password used
DBPassword=zabbix
# Connect to MySQL using Unix socket?
#DBSocket=/var/run/mysqld/mysqld.sock
1.1 net-analyzer/zabbix/files/1.4.5/postinstall-en.txt
file : http://sources.gentoo.org/viewcvs.py/gentoo-x86/net-analyzer/zabbix/files/1.4.5/postinstall-en.txt?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo-x86/net-analyzer/zabbix/files/1.4.5/postinstall-en.txt?rev=1.1&content-type=text/plain
Index: postinstall-en.txt
===================================================================
Please change the values of the following variables in
${MY_HTDOCSDIR}/include/db.inc.php:
DB_TYPE
DB_SERVER
DB_DATABASE
DB_USER
DB_PASSWORD
1.1 net-analyzer/zabbix/files/1.4.5/zabbix_agentd.conf
file : http://sources.gentoo.org/viewcvs.py/gentoo-x86/net-analyzer/zabbix/files/1.4.5/zabbix_agentd.conf?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo-x86/net-analyzer/zabbix/files/1.4.5/zabbix_agentd.conf?rev=1.1&content-type=text/plain
Index: zabbix_agentd.conf
===================================================================
# This is config file for zabbix_agentd
# To get more information about ZABBIX, go http://www.zabbix.com
############ GENERAL PARAMETERS #################
# List of comma delimited IP addresses (or hostnames) of ZABBIX servers.
# No spaces allowed. First entry is used for sending active checks.
# Note that hostnames must resolve hostname->IP address and
# IP address->hostname.
Server=127.0.0.1
# Server port for sending active checks
ServerPort=10051
# Unique hostname. Required for active checks.
Hostname=localhost
# Listen port. Default is 10050
ListenPort=10050
# IP address to bind agent
# If missing, bind to all available IPs
ListenIP=127.0.0.1
# Number of pre-forked instances of zabbix_agentd.
# Default value is 5
# This parameter must be between 1 and 16
StartAgents=5
# How often refresh list of active checks. 2 minutes by default.
#RefreshActiveChecks=120
# Disable active checks. The agent will work in passive mode listening server.
#DisableActive=1
# Enable remote commands for ZABBIX agent. By default remote commands disabled.
#EnableRemoteCommands=1
# Specifies debug level
# 0 - debug is not created
# 1 - critical information
# 2 - error information
# 3 - warnings (default)
# 4 - for debugging (produces lots of information)
DebugLevel=3
# Name of PID file
PidFile=/var/run/zabbix/zabbix_agentd.pid
# Name of log file.
# If not set, syslog will be used
LogFile=/var/log/zabbix/zabbix_agentd.log
# Spend no more than Timeout seconds on processing
# Must be between 1 and 30
Timeout=3
####### USER-DEFINED MONITORED PARAMETERS #######
# Format: UserParameter=<key>,<shell command>
# Note that shell command must not return empty string or EOL only
#UserParameter=system.test,who|wc -l
### Set of parameter for monitoring MySQL server (v3.23.42 and later)
### Change -u<username> and add -p<password> if required
#UserParameter=mysql.ping,mysqladmin -uroot ping|grep alive|wc -l
#UserParameter=mysql.uptime,mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T"
#UserParameter=mysql.threads,mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q"
#UserParameter=mysql.questions,mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S"
#UserParameter=mysql.slowqueries,mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O"
#UserParameter=mysql.qps,mysqladmin -uroot status|cut -f9 -d":"
#UserParameter=mysql.version,mysql -V
1.1 net-analyzer/zabbix/files/1.4.5/zabbix_agent.conf
file : http://sources.gentoo.org/viewcvs.py/gentoo-x86/net-analyzer/zabbix/files/1.4.5/zabbix_agent.conf?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewcvs.py/gentoo-x86/net-analyzer/zabbix/files/1.4.5/zabbix_agent.conf?rev=1.1&content-type=text/plain
Index: zabbix_agent.conf
===================================================================
# This is config file for zabbix_agent
# To get more information about ZABBIX,
# go http://www.zabbix.com
# IP address of ZABBIX server
# Connections from other hosts will be denied
Server=127.0.0.1
# Spend no more than Timeout seconds on processing
# Must be between 1 and 30
Timeout=3
####### USER-DEFINED MONITORED PARAMETERS #######
# Format: UserParameter=<key>,<shell command>
# Note that shell command must not return empty string or EOL only
#UserParameter=system.test,who|wc -l
### Set of parameter for monitoring MySQL server (v3.23.42 and later)
### Change -u<username> and add -p<password> if required
#UserParameter=mysql.ping,mysqladmin -uroot ping|grep alive|wc -l
#UserParameter=mysql.uptime,mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T"
#UserParameter=mysql.threads,mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q"
#UserParameter=mysql.questions,mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S"
#UserParameter=mysql.slowqueries,mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O"
#UserParameter=mysql.qps,mysqladmin -uroot status|cut -f9 -d":"
#UserParameter=mysql.version,mysql -V
--
gentoo-commits@lists.gentoo.org mailing list
^ permalink raw reply [flat|nested] 2+ messages in thread
* [gentoo-commits] gentoo-x86 commit in net-analyzer/zabbix/files/1.4.5: zabbix_server.conf postinstall-en.txt zabbix_agentd.conf zabbix_agent.conf
@ 2008-07-23 15:47 Wolfram Schlich (wschlich)
0 siblings, 0 replies; 2+ messages in thread
From: Wolfram Schlich (wschlich) @ 2008-07-23 15:47 UTC (permalink / raw
To: gentoo-commits
wschlich 08/07/23 15:47:37
Removed: zabbix_server.conf postinstall-en.txt
zabbix_agentd.conf zabbix_agent.conf
Log:
version bump, removed old versions
(Portage version: 2.1.5.6)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-07-23 15:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-23 15:47 [gentoo-commits] gentoo-x86 commit in net-analyzer/zabbix/files/1.4.5: zabbix_server.conf postinstall-en.txt zabbix_agentd.conf zabbix_agent.conf Wolfram Schlich (wschlich)
-- strict thread matches above, loose matches on Subject: below --
2008-03-29 7:05 Wolfram Schlich (wschlich)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox