* [gentoo-commits] dev/dilfridge:master commit in: sci-libs/linux-gpib/files/, sci-libs/linux-gpib/
@ 2011-08-14 11:27 Andreas Hüttel
0 siblings, 0 replies; 2+ messages in thread
From: Andreas Hüttel @ 2011-08-14 11:27 UTC (permalink / raw
To: gentoo-commits
commit: 84ad4df5ebe8e9acaef1a701a4d89bb2bd9c3897
Author: Andreas K. Huettel (dilfridge) <mail <AT> akhuettel <DOT> de>
AuthorDate: Sun Aug 14 01:41:08 2011 +0000
Commit: Andreas Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Sun Aug 14 01:41:08 2011 +0000
URL: http://git.overlays.gentoo.org/gitweb/?p=dev/dilfridge.git;a=commit;h=84ad4df5
Perl module installs now
(Portage version: 2.1.10.10/git/Linux x86_64, signed Manifest commit with key B6C5F7DE)
---
sci-libs/linux-gpib/ChangeLog | 4 ++
sci-libs/linux-gpib/Manifest | 25 +++++++++++-
.../linux-gpib/files/linux-gpib-3.2.16-perl.patch | 9 ++++
sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild | 41 +++++++++++--------
4 files changed, 60 insertions(+), 19 deletions(-)
diff --git a/sci-libs/linux-gpib/ChangeLog b/sci-libs/linux-gpib/ChangeLog
index 946818b..3f83e0f 100644
--- a/sci-libs/linux-gpib/ChangeLog
+++ b/sci-libs/linux-gpib/ChangeLog
@@ -2,6 +2,10 @@
# Copyright 1999-2011 Gentoo Foundation; Distributed under the GPL v2
# $Header: $
+ 14 Aug 2011; Andreas K. Huettel <dilfridge@gentoo.org>
+ linux-gpib-3.2.16-r1.ebuild, +files/linux-gpib-3.2.16-perl.patch:
+ Perl module installs now
+
*linux-gpib-3.2.16-r1 (12 Aug 2011)
12 Aug 2011; <huettel@gentoo.org> +linux-gpib-3.2.16-r1.ebuild:
diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest
index d63d4dd..41c7c4e 100644
--- a/sci-libs/linux-gpib/Manifest
+++ b/sci-libs/linux-gpib/Manifest
@@ -1,10 +1,31 @@
+-----BEGIN PGP SIGNED MESSAGE-----
+Hash: SHA512
+
AUX linux-gpib-3.2.15-build.patch 1681 RMD160 0d462f8d25790806c9699f6d5e480221f59e8978 SHA1 b421f3ef440426df3fa5e704c88495c1d8271664 SHA256 5845af9bf0660fc727c6a04ea41eb5e66f16915135d27c1a1aba69814d696704
+AUX linux-gpib-3.2.16-perl.patch 471 RMD160 9702c06a8ff7390105d217733487d5a2ceaf1073 SHA1 0476bfbf1f581fdbec391e7469893a02ca764f27 SHA256 7393237d7df3bad191d6c6790b87ff6e0b1f5fd006b77c0afeb5e1dcacb744fc
DIST gpib_firmware-2006-11-12.tar.gz 169357 RMD160 9784b026ef41ce75439c635610ec56f037e88499 SHA1 584f9ffeba8194ab5d44fdfd4c97ab919750596c SHA256 98380a8d12e6e34dccc0c1d82b48ed796c0c0f5571107d6a685524560aa8d701
DIST linux-gpib-3.2.15.tar.gz 1150433 RMD160 010d88374c8c6b243f4cffa292c70983c59c989a SHA1 405deb45972fd4e9a0648fca1182260dc7caa84f SHA256 0489ef5ce337a8a5b0d6ca702aee8b0218c3d5c07dc92b50330e80d50e769682
DIST linux-gpib-3.2.16.tar.gz 1189792 RMD160 943f6c09ec54b03c7179bace50d2a3b9e0e413a0 SHA1 1f6e501a4f84da39ffccf9f2fd45d390f5d96f75 SHA256 a1d158679a41ae48f826c5cbcb08d39839c65606dcdffb6a6f680554c6286c5e
EBUILD linux-gpib-3.2.15.ebuild 5096 RMD160 bd7f937f4e6c0390cf22a006a635dd6b7cdcc9d1 SHA1 599fb05ca34775f7f09eb61e2f50c3e8e3042eee SHA256 b78eebd993cc358b8b0421ab7ea53fcb0fb2b36ffbd0cdacfe78d8f0e8e746bc
-EBUILD linux-gpib-3.2.16-r1.ebuild 5065 RMD160 771744e7a028a4172d22632386e7c85c1f55837f SHA1 15508805090332142e53829f7c9a24224c6a387b SHA256 a4f0e05227b56245f3d84821a6d67ce988ab7863fd908d76e73e2bc9f7de29f0
+EBUILD linux-gpib-3.2.16-r1.ebuild 5142 RMD160 90e143d4938ecd07f584e6ee02ec0d865c96ddc1 SHA1 59da4208204fc082055ffd7ffcb4e18b532aca09 SHA256 f746b68dfa12e702efd6a61a7823160e493e8a135bc5809d0c65a9bcf6441b69
EBUILD linux-gpib-3.2.16.ebuild 4983 RMD160 bb17a163e19ed8f9d8ca366b212aea16196c81d6 SHA1 5c3c85ed0167786bbdb8ffcabeea21a5679fbe45 SHA256 3b00b49f896832b934136a9553b0a060c0f47407491c520d2fc30a3b67cf8fb3
-MISC ChangeLog 1544 RMD160 015bc5151fbae59668c5710d0dbc7711b38c11ab SHA1 da9237debaa5bb79a24b3109dee1b0bba6edb1d8 SHA256 87558eace63f2129ff2f125b72ddd7bf2a2ea1112f4ebbd0f86ee69f6b3b903a
+MISC ChangeLog 1697 RMD160 26355053377ab415c525c0b3daaa345cc131ff79 SHA1 6fc288c3c655f7f545282ecf871c3790bdb3a19a SHA256 2bd0e10ee0c6ddfff7f8aa23b44fc83ebae35434486c3f10801a22a36d166ef7
MISC metadata.xml 333 RMD160 53cc452da426b779f6231218f7700176efaa1418 SHA1 8041c003a5532b89964cd8b3deba4bf97a3a3b3f SHA256 94def6ae5ea540aab89b204a106ac9a1ffd7f6e07d537e445bb7373e3670d367
MISC notes.txt 953 RMD160 841091fe3ca13eb445c491dd939002f93d68f2c1 SHA1 342345998d98760ec62cd865eb27a36d7f9acabc SHA256 ac285c8b8fc201521a1cc4e40e8fdd8530f0456a08cb0362bb22dccdd88ccc44
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v2.0.17 (GNU/Linux)
+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+=BFmJ
+-----END PGP SIGNATURE-----
diff --git a/sci-libs/linux-gpib/files/linux-gpib-3.2.16-perl.patch b/sci-libs/linux-gpib/files/linux-gpib-3.2.16-perl.patch
new file mode 100644
index 0000000..16f2f15
--- /dev/null
+++ b/sci-libs/linux-gpib/files/linux-gpib-3.2.16-perl.patch
@@ -0,0 +1,9 @@
+diff -ruN linux-gpib-3.2.16.orig/language/Makefile.am linux-gpib-3.2.16/language/Makefile.am
+--- linux-gpib-3.2.16.orig/language/Makefile.am 2009-09-16 19:26:53.000000000 +0200
++++ linux-gpib-3.2.16/language/Makefile.am 2011-08-14 03:32:53.000000000 +0200
+@@ -67,4 +67,4 @@
+ $(RM) perl/Makefile
+
+ perl/Makefile:
+- -(cd perl && $(PERL) Makefile.PL)
++ -(cd perl && $(PERL) Makefile.PL PREFIX=$(EPREFIX)/usr INSTALLDIRS=vendor INSTALLMAN3DIR='none' DESTDIR="$(DESTDIR)" )
diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild
index b43ed3b..37390bf 100644
--- a/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild
+++ b/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild
@@ -3,7 +3,6 @@
# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild,v 1.1 2011/05/14 17:05:08 dilfridge Exp $
EAPI=4
-
PERL_EXPORT_PHASE_FUNCTIONS=no
inherit base linux-mod autotools perl-module
@@ -32,7 +31,10 @@ DEPEND="${RDEPEND}
doc? ( app-text/docbook-sgml-utils )
"
-PATCHES=( "${FILESDIR}/${PN}-3.2.15-build.patch" )
+PATCHES=(
+ "${FILESDIR}/${PN}-3.2.15-build.patch"
+ "${FILESDIR}/${PN}-3.2.16-perl.patch"
+)
pkg_setup () {
perl-module_pkg_setup
@@ -66,31 +68,36 @@ src_configure() {
$(use_enable python python-binding) \
$(use_enable tcl tcl-binding) \
$(use_enable doc documentation) \
- --with-linux-srcdir=${KV_DIR} \
- || die
+ --with-linux-srcdir=${KV_DIR}
}
src_compile() {
- emake
+ set_arch_to_kernel
+ FIRM_DIR=/usr/share/usb
+ emake \
+ DESTDIR=${D} \
+ INSTALL_MOD_PATH=${D} \
+ HOTPLUG_USB_CONF_DIR=${D}/etc/hotplug/usb \
+ USB_FIRMWARE_DIR=${D}${FIRM_DIR} \
+ docdir=/usr/share/doc/${PF}/html
}
src_install () {
set_arch_to_kernel
-
FIRM_DIR=/usr/share/usb
-
- # Here I changed the sbindir in order to install the gpib_config to /sbin,
- # not /usr/sbin. This is done to enable running gpib_config from
- # the modprobe.conf file: if /usr is not in the root file system,
- # but a mounted partition then gpib_congig cannot be found in the moment when
- # modprobe is run.
- make \
+ emake \
DESTDIR=${D} \
INSTALL_MOD_PATH=${D} \
HOTPLUG_USB_CONF_DIR=${D}/etc/hotplug/usb \
USB_FIRMWARE_DIR=${D}${FIRM_DIR} \
- docdir=/usr/share/doc/${PF}/html \
- install || die "install problem"
+ docdir=/usr/share/doc/${PF}/html install
+
+ if use perl; then
+ einfo "Installing perl module"
+ cd ${S}/language/perl
+ DESTDIR=${D} perl-module_src_install
+ cd ${S}
+ fi
echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
insinto /etc/udev/rules.d/
@@ -109,7 +116,6 @@ src_install () {
fi
if use firmware ; then
-
insinto "${FIRM_DIR}/agilent_8237a"
doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_8237a/*
@@ -118,17 +124,18 @@ src_install () {
insinto "/usr/share/linux-gpib/hp_82341"
doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/*
-
fi
}
pkg_preinst () {
linux-mod_pkg_preinst
+ perl-module_pkg_preinst
enewgroup gpib
}
pkg_postinst () {
linux-mod_pkg_postinst
+ perl-module_pkg_postinst
einfo "You need to run the 'gpib_config' utility to setup the driver before"
einfo "you can use it. In order to do it automatically you can add to your"
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [gentoo-commits] dev/dilfridge:master commit in: sci-libs/linux-gpib/files/, sci-libs/linux-gpib/
@ 2011-12-18 23:02 Andreas Hüttel
0 siblings, 0 replies; 2+ messages in thread
From: Andreas Hüttel @ 2011-12-18 23:02 UTC (permalink / raw
To: gentoo-commits
commit: 6ac237b756af10bfb79373083237077634f05126
Author: Andreas K. Huettel (dilfridge) <mail <AT> akhuettel <DOT> de>
AuthorDate: Sun Dec 18 23:01:45 2011 +0000
Commit: Andreas Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Sun Dec 18 23:01:45 2011 +0000
URL: http://git.overlays.gentoo.org/gitweb/?p=dev/dilfridge.git;a=commit;h=6ac237b7
[sci-libs/linux-gpib] Not needed here anymore
---
sci-libs/linux-gpib/ChangeLog | 57 -------
sci-libs/linux-gpib/Manifest | 11 --
.../linux-gpib/files/linux-gpib-3.2.15-build.patch | 44 -----
.../linux-gpib/files/linux-gpib-3.2.16-perl.patch | 9 -
sci-libs/linux-gpib/linux-gpib-3.2.15.ebuild | 169 -------------------
sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild | 178 --------------------
sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild | 163 ------------------
sci-libs/linux-gpib/metadata.xml | 12 --
sci-libs/linux-gpib/notes.txt | 29 ----
9 files changed, 0 insertions(+), 672 deletions(-)
diff --git a/sci-libs/linux-gpib/ChangeLog b/sci-libs/linux-gpib/ChangeLog
deleted file mode 100644
index 0be01d9..0000000
--- a/sci-libs/linux-gpib/ChangeLog
+++ /dev/null
@@ -1,57 +0,0 @@
-# ChangeLog for sci-libs/linux-gpib
-# Copyright 1999-2011 Gentoo Foundation; Distributed under the GPL v2
-# $Header: $
-
- 16 Aug 2011; <dilfridge@gentoo.org> linux-gpib-3.2.16-r1.ebuild:
- Fix typo in firmware directory name
-
- 14 Aug 2011; Andreas K. Huettel <dilfridge@gentoo.org>
- linux-gpib-3.2.16-r1.ebuild:
- Minor fixes, re-add keywords
-
- 14 Aug 2011; Andreas K. Huettel <dilfridge@gentoo.org>
- linux-gpib-3.2.16-r1.ebuild, +files/linux-gpib-3.2.16-perl.patch:
- Perl module installs now
-
-*linux-gpib-3.2.16-r1 (12 Aug 2011)
-
- 12 Aug 2011; <huettel@gentoo.org> +linux-gpib-3.2.16-r1.ebuild:
- Work in progress
-
-*linux-gpib-3.2.16 (12 Aug 2011)
-
- 12 Aug 2011; <huettel@gentoo.org> +linux-gpib-3.2.16.ebuild:
- Resync with main tree
-
- 31 Jan 2011; Andreas K. Huettel <dilfridge@gentoo.org>
- linux-gpib-3.2.15.ebuild, metadata.xml:
- Resync with tree
-
- 29 Jan 2011; Andreas K. Huettel <dilfridge@gentoo.org>
- linux-gpib-3.2.15.ebuild:
- Added missing call to linux-mod_pkg_preinst
-
- 24 Jan 2011; Andreas K. Huettel <dilfridge@gentoo.org>
- linux-gpib-3.2.15.ebuild, +files/linux-gpib-3.2.15-build.patch,
- -files/linux-gpib-3.2.15-drivers-make.am.patch,
- -files/linux-gpib-3.2.15-language-python-makefile.am.patch, +notes.txt:
- Builds now
-
- 24 Jan 2011; Andreas K. Huettel <dilfridge@gentoo.org>
- -linux-gpib-3.2.11.ebuild, -files/linux-gpib-3.2.11-drivers-make.am.patch,
- -files/linux-gpib-3.2.11-drivers-make.in.patch,
- -files/linux-gpib-3.2.11-language-python-makefile.am.patch,
- -files/linux-gpib-3.2.11-language-python-makefile.in.patch:
- Cleanup
-
-*linux-gpib-3.2.15 (24 Jan 2011)
-
- 24 Jan 2011; Andreas K. Huettel <dilfridge@gentoo.org>
- +linux-gpib-3.2.15.ebuild, +files/linux-gpib-3.2.15-drivers-make.am.patch,
- +files/linux-gpib-3.2.15-language-python-makefile.am.patch:
- Blind version bump
-
- 24 Jan 2011; Andreas K. Huettel <dilfridge@gentoo.org>
- linux-gpib-3.2.11.ebuild:
- Cleanup
-
diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest
deleted file mode 100644
index 073ba48..0000000
--- a/sci-libs/linux-gpib/Manifest
+++ /dev/null
@@ -1,11 +0,0 @@
-AUX linux-gpib-3.2.15-build.patch 1681 RMD160 0d462f8d25790806c9699f6d5e480221f59e8978 SHA1 b421f3ef440426df3fa5e704c88495c1d8271664 SHA256 5845af9bf0660fc727c6a04ea41eb5e66f16915135d27c1a1aba69814d696704
-AUX linux-gpib-3.2.16-perl.patch 471 RMD160 9702c06a8ff7390105d217733487d5a2ceaf1073 SHA1 0476bfbf1f581fdbec391e7469893a02ca764f27 SHA256 7393237d7df3bad191d6c6790b87ff6e0b1f5fd006b77c0afeb5e1dcacb744fc
-DIST gpib_firmware-2006-11-12.tar.gz 169357 RMD160 9784b026ef41ce75439c635610ec56f037e88499 SHA1 584f9ffeba8194ab5d44fdfd4c97ab919750596c SHA256 98380a8d12e6e34dccc0c1d82b48ed796c0c0f5571107d6a685524560aa8d701
-DIST linux-gpib-3.2.15.tar.gz 1150433 RMD160 010d88374c8c6b243f4cffa292c70983c59c989a SHA1 405deb45972fd4e9a0648fca1182260dc7caa84f SHA256 0489ef5ce337a8a5b0d6ca702aee8b0218c3d5c07dc92b50330e80d50e769682
-DIST linux-gpib-3.2.16.tar.gz 1189792 RMD160 943f6c09ec54b03c7179bace50d2a3b9e0e413a0 SHA1 1f6e501a4f84da39ffccf9f2fd45d390f5d96f75 SHA256 a1d158679a41ae48f826c5cbcb08d39839c65606dcdffb6a6f680554c6286c5e
-EBUILD linux-gpib-3.2.15.ebuild 5096 RMD160 bd7f937f4e6c0390cf22a006a635dd6b7cdcc9d1 SHA1 599fb05ca34775f7f09eb61e2f50c3e8e3042eee SHA256 b78eebd993cc358b8b0421ab7ea53fcb0fb2b36ffbd0cdacfe78d8f0e8e746bc
-EBUILD linux-gpib-3.2.16-r1.ebuild 5251 RMD160 da535e72cb7f840383ee4d334bc3943fcff9d745 SHA1 bd5898b746f6bc8160a2976b4c1ba089c63e9166 SHA256 2ca1da2eb4307c3592ca04afe73778a74ab1b7afb6e91c4e8c67a4311c45034d
-EBUILD linux-gpib-3.2.16.ebuild 4983 RMD160 bb17a163e19ed8f9d8ca366b212aea16196c81d6 SHA1 5c3c85ed0167786bbdb8ffcabeea21a5679fbe45 SHA256 3b00b49f896832b934136a9553b0a060c0f47407491c520d2fc30a3b67cf8fb3
-MISC ChangeLog 1923 RMD160 422c4d313706fa949eaf783e3eaba64320317ae2 SHA1 7b12ac86fa6527f60f7ea57a5a7906a4d23c0cb8 SHA256 3a7eb7d300b6ce022ee01e016ca7ef9ab182acc47649cee4c44501b1f310f36b
-MISC metadata.xml 333 RMD160 53cc452da426b779f6231218f7700176efaa1418 SHA1 8041c003a5532b89964cd8b3deba4bf97a3a3b3f SHA256 94def6ae5ea540aab89b204a106ac9a1ffd7f6e07d537e445bb7373e3670d367
-MISC notes.txt 953 RMD160 841091fe3ca13eb445c491dd939002f93d68f2c1 SHA1 342345998d98760ec62cd865eb27a36d7f9acabc SHA256 ac285c8b8fc201521a1cc4e40e8fdd8530f0456a08cb0362bb22dccdd88ccc44
diff --git a/sci-libs/linux-gpib/files/linux-gpib-3.2.15-build.patch b/sci-libs/linux-gpib/files/linux-gpib-3.2.15-build.patch
deleted file mode 100644
index 14a1868..0000000
--- a/sci-libs/linux-gpib/files/linux-gpib-3.2.15-build.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-diff -ruN linux-gpib-3.2.15-0-orig/drivers/Makefile.am linux-gpib-3.2.15/drivers/Makefile.am
---- linux-gpib-3.2.15-0-orig/drivers/Makefile.am 2007-04-19 17:21:04.000000000 +0200
-+++ linux-gpib-3.2.15/drivers/Makefile.am 2011-01-24 23:20:59.000000000 +0100
-@@ -27,39 +27,13 @@
- CC="$(LINUX_CC) -I@abs_top_srcdir@ -I@abs_top_srcdir@/drivers/gpib/include -I@abs_top_srcdir@/include" \
- SUBDIRS="$(GPIB_ABS_MODULE_SUBDIR)"
-
--install-data-hook: device-file-check /etc/gpib.conf
-+install-data-hook: /etc/gpib.conf
- $(MAKE) -C $(LINUX_SRCDIR) V=1 modules_install\
- CC="$(LINUX_CC) -I@abs_top_srcdir@ -I@abs_top_srcdir@/driver/include -I@abs_top_srcdir@/include" \
- SUBDIRS="$(GPIB_ABS_MODULE_SUBDIR)" INSTALL_MOD_DIR="gpib"
-- $(DEPMOD) -ae
--
--/dev/gpib0:
-- groupadd gpib || echo "group gpib exists"
-- for i in `seq 0 15`; \
-- do \
-- mknod -m u=rw,g=rw,o= /dev/gpib$${i} c $(IBMAJOR) $${i} || exit 1; \
-- chown root:gpib /dev/gpib$${i}; \
-- done
--
--.PHONY : device-file-check
--device-file-check: /dev/gpib0
-- @if [ ! -c /dev/gpib0 ]; then \
-- if [ -a /dev/gpib0 ]; then \
-- echo "A file or directory called /dev/gpib0 exists but it is not" \
-- "a character device. Delete or move it and try again."; \
-- exit 1; \
-- fi; \
-- fi
-- @ls -l /dev/gpib0 | grep -q "$(IBMAJOR)"; \
-- if [ $$? != 0 ]; then \
-- echo "/dev/gpib0 has the wrong major number. " \
-- "Delete your /dev/gpibX files and try again."; \
-- exit 1; \
-- fi
-
- #should move this to util/templates Makefile.am when it exists
- /etc/gpib.conf:
-- $(INSTALL_DATA) -D $(top_srcdir)/util/templates/gpib.conf /etc/gpib.conf
-
- #make sure compiled files, etc don't make it into distribution tarballs
- dist-hook:
diff --git a/sci-libs/linux-gpib/files/linux-gpib-3.2.16-perl.patch b/sci-libs/linux-gpib/files/linux-gpib-3.2.16-perl.patch
deleted file mode 100644
index 16f2f15..0000000
--- a/sci-libs/linux-gpib/files/linux-gpib-3.2.16-perl.patch
+++ /dev/null
@@ -1,9 +0,0 @@
-diff -ruN linux-gpib-3.2.16.orig/language/Makefile.am linux-gpib-3.2.16/language/Makefile.am
---- linux-gpib-3.2.16.orig/language/Makefile.am 2009-09-16 19:26:53.000000000 +0200
-+++ linux-gpib-3.2.16/language/Makefile.am 2011-08-14 03:32:53.000000000 +0200
-@@ -67,4 +67,4 @@
- $(RM) perl/Makefile
-
- perl/Makefile:
-- -(cd perl && $(PERL) Makefile.PL)
-+ -(cd perl && $(PERL) Makefile.PL PREFIX=$(EPREFIX)/usr INSTALLDIRS=vendor INSTALLMAN3DIR='none' DESTDIR="$(DESTDIR)" )
diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.15.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.15.ebuild
deleted file mode 100644
index e301d23..0000000
--- a/sci-libs/linux-gpib/linux-gpib-3.2.15.ebuild
+++ /dev/null
@@ -1,169 +0,0 @@
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.15.ebuild,v 1.1 2011/01/31 22:29:39 dilfridge Exp $
-
-EAPI=3
-
-inherit base linux-mod autotools
-
-DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="http://linux-gpib.sourceforge.net/"
-SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz
- firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="pcmcia static debug guile perl php python tcl doc firmware"
-
-RDEPEND="
- tcl? ( dev-lang/tcl )
- guile? ( dev-scheme/guile )
- perl? ( dev-lang/perl )
- php? ( dev-lang/php )
- python? ( dev-lang/python )
- firmware? ( sys-apps/fxload )
-"
-
-DEPEND="${RDEPEND}
- sys-kernel/module-rebuild
- doc? ( app-text/docbook-sgml-utils )
-"
-
-PATCHES=( "${FILESDIR}/${P}-build.patch" )
-
-pkg_setup () {
- linux-mod_pkg_setup
-
- case ${KV_MINOR} in
- 4) die "This version of Linux-GPIB requires a version 2.6.x of the Linux kernel. 2.4.x kernels are supported by Linux-GPIB versions 3.1.x." ;;
- 6) ;;
- *) die "Unsupported kernel version '${KV}'." ;;
- esac
-
- if [ ${KV_PATCH} -lt 8 ] ; then
- die "Kernel versions older than 2.6.8 are not supported."
- fi
-}
-
-src_prepare () {
- base_src_prepare
- eautoreconf
-}
-
-src_configure() {
- set_arch_to_kernel
- econf \
- $(use_enable pcmcia) \
- $(use_enable static) \
- $(use_enable debug driver-debug) \
- $(use_enable guile guile-binding) \
- $(use_enable perl perl-binding) \
- $(use_enable php php-binding) \
- $(use_enable python python-binding) \
- $(use_enable tcl tcl-binding) \
- $(use_enable doc documentation) \
- --with-linux-srcdir=${KV_DIR} \
- || die
-}
-
-src_compile() {
- emake || die
-}
-
-src_install () {
-
- FIRM_DIR=/usr/share/usb
-
- # Here I changed the sbindir in order to install the gpib_config to /sbin,
- # not /usr/sbin. This is done to enable running gpib_config from
- # the modprobe.conf file: if /usr is not in the root file system,
- # but a mounted partition then gpib_congig cannot be found in the moment when
- # modprobe is run.
- make \
- DESTDIR=${D} \
- INSTALL_MOD_PATH=${D} \
- HOTPLUG_USB_CONF_DIR=${D}/etc/hotplug/usb \
- USB_FIRMWARE_DIR=${D}${FIRM_DIR} \
- docdir=/usr/share/doc/${PF}/html \
- install || die "install problem"
-
- echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
- insinto /etc/udev/rules.d/
- doins 99-gpib.rules
-
- dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
- insinto /etc
- newins util/templates/gpib.conf gpib.conf
- newins util/templates/gpib.conf gpib.conf.example
-
- if use pcmcia ; then
- dodir /etc/pcmcia
- insinto /etc/pcmcia
- doins "${S}"/etc/pcmcia/*
- fi
-
- if use firmware ; then
-
- dodir "${FIRM_DIR}/agilent_8237a"
- insinto "${FIRM_DIR}/agilent_8237a"
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_8237a/*
-
- dodir "${FIRM_DIR}/ni_gpib_usb_b"
- insinto "${FIRM_DIR}/ni_gpib_usb_b"
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
-
- dodir "/usr/share/linux-gpib/hp_82341"
- insinto "/usr/share/linux-gpib/hp_82341"
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/*
-
- fi
-}
-
-pkg_preinst () {
- linux-mod_pkg_preinst
- enewgroup gpib
-}
-
-pkg_postinst () {
- linux-mod_pkg_postinst
-
- einfo "You need to run the 'gpib_config' utility to setup the driver before"
- einfo "you can use it. In order to do it automatically you can add to your"
- einfo "start script something like this (supposing the appropriate driver"
- einfo "is loaded on the startup):"
- einfo " gpib_config --minor 0"
- einfo ""
- einfo "To give a user access to the computer's gpib board you will have to add"
- einfo "them to the group 'gpib' or, you could change the permissions on the device"
- einfo "files /dev/gpib[0-15] to something you like better, using 'chmod'."
- einfo ""
- einfo "Edit /etc/gpib.conf to match your interface board, and any devices you wish"
- einfo "to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for"
- einfo "more information."
- einfo ""
-
- if use pcmcia ; then
- einfo "For PCMCIA cards:"
- einfo "All files needed for a PCMCIA board were copied to /etc/pcmcia."
- einfo "You may wish to edit the options passed to the gpib_config call in the"
- einfo "/etc/pcmcia/linux-gpib-pcmcia script."
- einfo "You may need to send a SIGHUP signal to the cardmgr daemon to force it"
- einfo "to reload the files in /etc/pcmcia (alternatively you could use your"
- einfo "pcmcia init.d script to restart the cardmgr, or you could just reboot)."
- einfo "The driver module will be loaded as needed by the cardmgr."
- einfo ""
- fi
-
- if use firmware ; then
- einfo "For Agilent (HP) 82341C and 82341D cards:"
- einfo "The firmware for these boards is uploaded by passing the appropriate"
- einfo "firmware file from /usr/share/linux-gpib/hp_82341 directory to"
- einfo "gpib_config using the -I or --init-data command line option. Example:"
- einfo "gpib_config --minor 0 --init-data \\"
- einfo "/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin"
- einfo ""
- fi
-
-}
diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild
deleted file mode 100644
index 429238b..0000000
--- a/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild
+++ /dev/null
@@ -1,178 +0,0 @@
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild,v 1.1 2011/05/14 17:05:08 dilfridge Exp $
-
-EAPI=4
-PERL_EXPORT_PHASE_FUNCTIONS=no
-
-inherit base linux-mod autotools perl-module
-
-DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="http://linux-gpib.sourceforge.net/"
-SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz
- firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="pcmcia static debug guile perl php python tcl doc firmware"
-
-COMMONDEPEND="
- tcl? ( dev-lang/tcl )
- guile? ( dev-scheme/guile )
- perl? ( dev-lang/perl )
- php? ( dev-lang/php )
- python? ( dev-lang/python )
- firmware? ( sys-apps/fxload )
-"
-RDEPEND="${COMMONDEPEND}"
-DEPEND="${COMMONDEPEND}
- sys-kernel/module-rebuild
- doc? ( app-text/docbook-sgml-utils )
- perl? ( virtual/perl-ExtUtils-MakeMaker )
-"
-
-PATCHES=(
- "${FILESDIR}/${PN}-3.2.15-build.patch"
- "${FILESDIR}/${PN}-3.2.16-perl.patch"
-)
-
-pkg_setup () {
- perl-module_pkg_setup
- linux-mod_pkg_setup
-
- case ${KV_MINOR} in
- 4) die "This version of Linux-GPIB requires a version 2.6.x of the Linux kernel. 2.4.x kernels are supported by Linux-GPIB versions 3.1.x." ;;
- 6) ;;
- *) die "Unsupported kernel version '${KV_FULL}'." ;;
- esac
-
- if [ ${KV_PATCH} -lt 8 ] ; then
- die "Kernel versions older than 2.6.8 are not supported."
- fi
-}
-
-src_prepare () {
- base_src_prepare
- eautoreconf
-}
-
-src_configure() {
- set_arch_to_kernel
- econf \
- $(use_enable pcmcia) \
- $(use_enable static) \
- $(use_enable debug driver-debug) \
- $(use_enable guile guile-binding) \
- $(use_enable perl perl-binding) \
- $(use_enable php php-binding) \
- $(use_enable python python-binding) \
- $(use_enable tcl tcl-binding) \
- $(use_enable doc documentation) \
- --with-linux-srcdir=${KV_DIR}
-}
-
-src_compile() {
- set_arch_to_kernel
- FIRM_DIR=/usr/share/usb
- emake \
- DESTDIR=${D} \
- INSTALL_MOD_PATH=${D} \
- HOTPLUG_USB_CONF_DIR=${D}/etc/hotplug/usb \
- USB_FIRMWARE_DIR=${D}${FIRM_DIR} \
- docdir=/usr/share/doc/${PF}/html
-}
-
-src_install () {
- set_arch_to_kernel
- FIRM_DIR=/usr/share/usb
- emake \
- DESTDIR=${D} \
- INSTALL_MOD_PATH=${D} \
- HOTPLUG_USB_CONF_DIR=${D}/etc/hotplug/usb \
- USB_FIRMWARE_DIR=${D}${FIRM_DIR} \
- docdir=/usr/share/doc/${PF}/html install
-
- if use perl; then
- einfo "Installing perl module"
- cd "${S}/language/perl" || die
- DESTDIR=${D} perl-module_src_install
- cd "${S}" || die
- fi
-
- echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
- insinto /etc/udev/rules.d/
- doins 99-gpib.rules
-
- dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
- insinto /etc
- newins util/templates/gpib.conf gpib.conf
- newins util/templates/gpib.conf gpib.conf.example
-
- if use pcmcia ; then
- dodir /etc/pcmcia
- insinto /etc/pcmcia
- doins "${S}"/etc/pcmcia/*
- fi
-
- if use firmware ; then
- insinto "${FIRM_DIR}/agilent_82357a"
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/*
-
- insinto "${FIRM_DIR}/ni_gpib_usb_b"
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
-
- insinto "/usr/share/linux-gpib/hp_82341"
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/*
- fi
-}
-
-pkg_preinst () {
- linux-mod_pkg_preinst
- perl-module_pkg_preinst
- enewgroup gpib
-}
-
-pkg_postinst () {
- linux-mod_pkg_postinst
- perl-module_pkg_postinst
-
- einfo "You need to run the 'gpib_config' utility to setup the driver before"
- einfo "you can use it. In order to do it automatically you can add to your"
- einfo "start script something like this (supposing the appropriate driver"
- einfo "is loaded on the startup):"
- einfo " gpib_config --minor 0"
- einfo ""
- einfo "To give a user access to the computer's gpib board you will have to add"
- einfo "them to the group 'gpib' or, you could change the permissions on the device"
- einfo "files /dev/gpib[0-15] to something you like better, using 'chmod'."
- einfo ""
- einfo "Edit /etc/gpib.conf to match your interface board, and any devices you wish"
- einfo "to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for"
- einfo "more information."
- einfo ""
-
- if use pcmcia ; then
- einfo "For PCMCIA cards:"
- einfo "All files needed for a PCMCIA board were copied to /etc/pcmcia."
- einfo "You may wish to edit the options passed to the gpib_config call in the"
- einfo "/etc/pcmcia/linux-gpib-pcmcia script."
- einfo "You may need to send a SIGHUP signal to the cardmgr daemon to force it"
- einfo "to reload the files in /etc/pcmcia (alternatively you could use your"
- einfo "pcmcia init.d script to restart the cardmgr, or you could just reboot)."
- einfo "The driver module will be loaded as needed by the cardmgr."
- einfo ""
- fi
-
- if use firmware ; then
- einfo "For Agilent (HP) 82341C and 82341D cards:"
- einfo "The firmware for these boards is uploaded by passing the appropriate"
- einfo "firmware file from /usr/share/linux-gpib/hp_82341 directory to"
- einfo "gpib_config using the -I or --init-data command line option. Example:"
- einfo "gpib_config --minor 0 --init-data \\"
- einfo "/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin"
- einfo ""
- fi
-
-}
diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild
deleted file mode 100644
index ae89871..0000000
--- a/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild
+++ /dev/null
@@ -1,163 +0,0 @@
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild,v 1.1 2011/05/14 17:05:08 dilfridge Exp $
-
-EAPI=4
-
-inherit base linux-mod autotools
-
-DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="http://linux-gpib.sourceforge.net/"
-SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz
- firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="pcmcia static debug guile perl php python tcl doc firmware"
-
-RDEPEND="
- tcl? ( dev-lang/tcl )
- guile? ( dev-scheme/guile )
- perl? ( dev-lang/perl )
- php? ( dev-lang/php )
- python? ( dev-lang/python )
- firmware? ( sys-apps/fxload )
-"
-
-DEPEND="${RDEPEND}
- sys-kernel/module-rebuild
- doc? ( app-text/docbook-sgml-utils )
-"
-
-PATCHES=( "${FILESDIR}/${PN}-3.2.15-build.patch" )
-
-pkg_setup () {
- linux-mod_pkg_setup
-
- case ${KV_MINOR} in
- 4) die "This version of Linux-GPIB requires a version 2.6.x of the Linux kernel. 2.4.x kernels are supported by Linux-GPIB versions 3.1.x." ;;
- 6) ;;
- *) die "Unsupported kernel version '${KV_FULL}'." ;;
- esac
-
- if [ ${KV_PATCH} -lt 8 ] ; then
- die "Kernel versions older than 2.6.8 are not supported."
- fi
-}
-
-src_prepare () {
- base_src_prepare
- eautoreconf
-}
-
-src_configure() {
- set_arch_to_kernel
- econf \
- $(use_enable pcmcia) \
- $(use_enable static) \
- $(use_enable debug driver-debug) \
- $(use_enable guile guile-binding) \
- $(use_enable perl perl-binding) \
- $(use_enable php php-binding) \
- $(use_enable python python-binding) \
- $(use_enable tcl tcl-binding) \
- $(use_enable doc documentation) \
- --with-linux-srcdir=${KV_DIR} \
- || die
-}
-
-src_install () {
- set_arch_to_kernel
-
- FIRM_DIR=/usr/share/usb
-
- # Here I changed the sbindir in order to install the gpib_config to /sbin,
- # not /usr/sbin. This is done to enable running gpib_config from
- # the modprobe.conf file: if /usr is not in the root file system,
- # but a mounted partition then gpib_congig cannot be found in the moment when
- # modprobe is run.
- make \
- DESTDIR=${D} \
- INSTALL_MOD_PATH=${D} \
- HOTPLUG_USB_CONF_DIR=${D}/etc/hotplug/usb \
- USB_FIRMWARE_DIR=${D}${FIRM_DIR} \
- docdir=/usr/share/doc/${PF}/html \
- install || die "install problem"
-
- echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
- insinto /etc/udev/rules.d/
- doins 99-gpib.rules
-
- dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
- insinto /etc
- newins util/templates/gpib.conf gpib.conf
- newins util/templates/gpib.conf gpib.conf.example
-
- if use pcmcia ; then
- dodir /etc/pcmcia
- insinto /etc/pcmcia
- doins "${S}"/etc/pcmcia/*
- fi
-
- if use firmware ; then
-
- insinto "${FIRM_DIR}/agilent_8237a"
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_8237a/*
-
- insinto "${FIRM_DIR}/ni_gpib_usb_b"
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
-
- insinto "/usr/share/linux-gpib/hp_82341"
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/*
-
- fi
-}
-
-pkg_preinst () {
- linux-mod_pkg_preinst
- enewgroup gpib
-}
-
-pkg_postinst () {
- linux-mod_pkg_postinst
-
- einfo "You need to run the 'gpib_config' utility to setup the driver before"
- einfo "you can use it. In order to do it automatically you can add to your"
- einfo "start script something like this (supposing the appropriate driver"
- einfo "is loaded on the startup):"
- einfo " gpib_config --minor 0"
- einfo ""
- einfo "To give a user access to the computer's gpib board you will have to add"
- einfo "them to the group 'gpib' or, you could change the permissions on the device"
- einfo "files /dev/gpib[0-15] to something you like better, using 'chmod'."
- einfo ""
- einfo "Edit /etc/gpib.conf to match your interface board, and any devices you wish"
- einfo "to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for"
- einfo "more information."
- einfo ""
-
- if use pcmcia ; then
- einfo "For PCMCIA cards:"
- einfo "All files needed for a PCMCIA board were copied to /etc/pcmcia."
- einfo "You may wish to edit the options passed to the gpib_config call in the"
- einfo "/etc/pcmcia/linux-gpib-pcmcia script."
- einfo "You may need to send a SIGHUP signal to the cardmgr daemon to force it"
- einfo "to reload the files in /etc/pcmcia (alternatively you could use your"
- einfo "pcmcia init.d script to restart the cardmgr, or you could just reboot)."
- einfo "The driver module will be loaded as needed by the cardmgr."
- einfo ""
- fi
-
- if use firmware ; then
- einfo "For Agilent (HP) 82341C and 82341D cards:"
- einfo "The firmware for these boards is uploaded by passing the appropriate"
- einfo "firmware file from /usr/share/linux-gpib/hp_82341 directory to"
- einfo "gpib_config using the -I or --init-data command line option. Example:"
- einfo "gpib_config --minor 0 --init-data \\"
- einfo "/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin"
- einfo ""
- fi
-
-}
diff --git a/sci-libs/linux-gpib/metadata.xml b/sci-libs/linux-gpib/metadata.xml
deleted file mode 100644
index 7de2285..0000000
--- a/sci-libs/linux-gpib/metadata.xml
+++ /dev/null
@@ -1,12 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
-<pkgmetadata>
- <herd>sci-electronics</herd>
- <maintainer>
- <email>dilfridge@gentoo.org</email>
- <name>Andreas K. Huettel</name>
- </maintainer>
- <use>
- <flag name='firmware'>Install firmware</flag>
- </use>
-</pkgmetadata>
diff --git a/sci-libs/linux-gpib/notes.txt b/sci-libs/linux-gpib/notes.txt
deleted file mode 100644
index a17b55e..0000000
--- a/sci-libs/linux-gpib/notes.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Sections removed from Makefiles:
-
-
-/dev/gpib0:
- for i in `seq 0 15`; \
- do \
- mknod -m u=rw,g=rw,o= /dev/gpib$${i} c $(IBMAJOR) $${i} || exit 1; \
- chown root:gpib /dev/gpib$${i}; \
- done
-
-.PHONY : device-file-check-emerge
-device-file-check-emerge: /dev/gpib0
- @if [ ! -c /dev/gpib0 ]; then \
- if [ -a /dev/gpib0 ]; then \
- echo "A file or directory called /dev/gpib0 exists but it is not" \
- "a character device. Delete or move it and try again."; \
- exit 1; \
- fi; \
- fi
- @ls -l /dev/gpib0 | grep -q "$(IBMAJOR)"; \
- if [ $$? != 0 ]; then \
- echo "/dev/gpib0 has the wrong major number. " \
- "Delete your /dev/gpibX files and try again."; \
- exit 1; \
- fi
-
-.PHONY : device-file-check
-device-file-check:
-
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-12-18 23:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-12-18 23:02 [gentoo-commits] dev/dilfridge:master commit in: sci-libs/linux-gpib/files/, sci-libs/linux-gpib/ Andreas Hüttel
-- strict thread matches above, loose matches on Subject: below --
2011-08-14 11:27 Andreas Hüttel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox