* [gentoo-commits] gentoo-x86 commit in sys-cluster/torque: torque-2.5.13.ebuild ChangeLog
@ 2014-06-19 19:55 Justin Bronder (jsbronder)
0 siblings, 0 replies; 2+ messages in thread
From: Justin Bronder (jsbronder) @ 2014-06-19 19:55 UTC (permalink / raw
To: gentoo-commits
jsbronder 14/06/19 19:55:00
Modified: ChangeLog
Added: torque-2.5.13.ebuild
Log:
Bump 2.5.13 with additional patches for CVE-2013-4495 (#491270) and CVE-2014-0749 (#510726)
(Portage version: 2.2.8-r1/cvs/Linux x86_64, signed Manifest commit with key 4D7043C9)
Revision Changes Path
1.167 sys-cluster/torque/ChangeLog
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/ChangeLog?rev=1.167&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/ChangeLog?rev=1.167&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/ChangeLog?r1=1.166&r2=1.167
Index: ChangeLog
===================================================================
RCS file: /var/cvsroot/gentoo-x86/sys-cluster/torque/ChangeLog,v
retrieving revision 1.166
retrieving revision 1.167
diff -u -r1.166 -r1.167
--- ChangeLog 19 Jan 2014 20:36:30 -0000 1.166
+++ ChangeLog 19 Jun 2014 19:55:00 -0000 1.167
@@ -1,6 +1,13 @@
# ChangeLog for sys-cluster/torque
# Copyright 1999-2014 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-cluster/torque/ChangeLog,v 1.166 2014/01/19 20:36:30 jsbronder Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-cluster/torque/ChangeLog,v 1.167 2014/06/19 19:55:00 jsbronder Exp $
+
+*torque-2.5.13 (19 Jun 2014)
+
+ 19 Jun 2014; Justin Bronder <jsbronder@gentoo.org> +torque-2.5.13.ebuild,
+ +files/CVE-2013-4495.patch, +files/CVE-2014-0749.patch:
+ Bump 2.5.13 with additional patches for CVE-2013-4495 (#491270) and
+ CVE-2014-0749 (#510726)
19 Jan 2014; Justin Bronder <jsbronder@gentoo.org> -torque-2.4.16.ebuild,
-torque-2.4.16-r1.ebuild, -files/0001-fix-parallel-doc-install.patch,
1.1 sys-cluster/torque/torque-2.5.13.ebuild
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/torque-2.5.13.ebuild?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/torque-2.5.13.ebuild?rev=1.1&content-type=text/plain
Index: torque-2.5.13.ebuild
===================================================================
# Copyright 1999-2014 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-cluster/torque/torque-2.5.13.ebuild,v 1.1 2014/06/19 19:55:00 jsbronder Exp $
EAPI=4
inherit autotools-utils eutils flag-o-matic linux-info
DESCRIPTION="Resource manager and queuing system based on OpenPBS"
HOMEPAGE="http://www.adaptivecomputing.com/products/open-source/torque"
SRC_URI="http://www.adaptivecomputing.com/index.php?wpfb_dl=1643 -> ${P}.tar.gz"
LICENSE="torque-2.5"
SLOT="0"
KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86"
IUSE="cpusets +crypt doc drmaa kernel_linux munge server static-libs +syslog threads tk xml"
# ed is used by makedepend-sh
DEPEND_COMMON="sys-libs/ncurses
sys-libs/readline
munge? ( sys-auth/munge )
tk? ( dev-lang/tk )
syslog? ( virtual/logger )
!games-util/qstat"
DEPEND="${DEPEND_COMMON}
sys-apps/ed
!sys-cluster/slurm"
RDEPEND="${DEPEND_COMMON}
crypt? ( net-misc/openssh )
!crypt? ( net-misc/netkit-rsh )"
DOCS=( Release_Notes )
AUTOTOOLS_IN_SOURCE_BUILD=1
pkg_setup() {
PBS_SERVER_HOME="${PBS_SERVER_HOME:-/var/spool/torque}"
# Find a Torque server to use. Check environment, then
# current setup (if any), and fall back on current hostname.
if [ -z "${PBS_SERVER_NAME}" ]; then
if [ -f "${ROOT}${PBS_SERVER_HOME}/server_name" ]; then
PBS_SERVER_NAME="$(<${ROOT}${PBS_SERVER_HOME}/server_name)"
else
PBS_SERVER_NAME=$(hostname -f)
fi
fi
USE_CPUSETS="--disable-cpuset"
if use cpusets; then
if ! use kernel_linux; then
einfo
elog " Torque currently only has support for cpusets in linux."
elog "Assuming you didn't really want this USE flag."
einfo
else
linux-info_pkg_setup
einfo
elog " Torque support for cpusets is still in development, you may"
elog "wish to disable it for production use."
einfo
if ! linux_config_exists || ! linux_chkconfig_present CPUSETS; then
einfo
elog " Torque support for cpusets will require that you recompile"
elog "your kernel with CONFIG_CPUSETS enabled."
einfo
fi
USE_CPUSETS="--enable-cpuset"
fi
fi
}
src_prepare() {
epatch "${FILESDIR}"/CVE-2013-4319-2.x-root-submit-fix.patch
epatch "${FILESDIR}"/tcl8.6.patch
# 510726
epatch "${FILESDIR}"/CVE-2014-0749.patch
# 491270
epatch "${FILESDIR}"/CVE-2013-4495.patch
# Unused and causes breakage when switching from glibc to tirpc.
# https://github.com/adaptivecomputing/torque/pull/148
sed -i '/rpc\/rpc\.h/d' src/lib/Libnet/net_client.c || die
}
src_configure() {
local myeconfargs=( --with-rcp=mom_rcp )
use crypt && myeconfargs=( --with-rcp=scp )
myeconfargs+=(
$(use_enable tk gui)
$(use_enable tk tcl-qstat)
$(use_enable syslog)
$(use_enable server)
$(use_enable drmaa)
$(use_enable threads high-availability)
$(use_enable xml server-xml)
$(use_enable munge munge-auth)
--with-server-home=${PBS_SERVER_HOME}
--with-environ=/etc/pbs_environment
--with-default-server=${PBS_SERVER_NAME}
--disable-gcc-warnings
--with-tcp-retry-limit=2
${USE_CPUSETS}
)
autotools-utils_src_configure
}
# WARNING
# OpenPBS is extremely stubborn about directory permissions. Sometimes it will
# just fall over with the error message, but in some spots it will just ignore
# you and fail strangely. Likewise it also barfs on our .keep files!
pbs_createspool() {
local root="$1"
local s="$(dirname "${PBS_SERVER_HOME}")"
local h="${PBS_SERVER_HOME}"
local sp="${h}/server_priv"
einfo "Building spool directory under ${D}${h}"
local a d m
local dir_spec="
0755:${h}/aux 0700:${h}/checkpoint
0755:${h}/mom_logs 0751:${h}/mom_priv 0751:${h}/mom_priv/jobs
1777:${h}/spool 1777:${h}/undelivered"
if use server; then
dir_spec="${dir_spec} 0755:${h}/sched_logs
0755:${h}/sched_priv/accounting 0755:${h}/server_logs
0750:${h}/server_priv 0755:${h}/server_priv/accounting
0750:${h}/server_priv/acl_groups 0750:${h}/server_priv/acl_hosts
0750:${h}/server_priv/acl_svr 0750:${h}/server_priv/acl_users
0750:${h}/server_priv/jobs 0750:${h}/server_priv/queues"
fi
for a in ${dir_spec}; do
d="${a/*:}"
m="${a/:*}"
if [[ ! -d "${root}${d}" ]]; then
install -d -m${m} "${root}${d}" || die
else
chmod ${m} "${root}${d}" || die
fi
# (#149226) If we're running in src_*, then keepdir
if [[ "${root}" = "${D}" ]]; then
keepdir ${d}
fi
done
}
src_install() {
# Make directories first
pbs_createspool "${D}"
autotools-utils_src_install
use doc && dodoc doc/admin_guide.ps doc/*.pdf
# The build script isn't alternative install location friendly,
# So we have to fix some hard-coded paths in tclIndex for xpbs* to work
for file in `find "${D}" -iname tclIndex`; do
sed -e "s/${D//\// }/ /" "${file}" > "${file}.new"
mv "${file}.new" "${file}" || die
done
if use server; then
newinitd "${FILESDIR}"/pbs_server-init.d-munge pbs_server
newinitd "${FILESDIR}"/pbs_sched-init.d pbs_sched
fi
newinitd "${FILESDIR}"/pbs_mom-init.d-munge pbs_mom
newconfd "${FILESDIR}"/torque-conf.d-munge torque
newenvd "${FILESDIR}"/torque-env.d 25torque
}
pkg_preinst() {
if [[ -f "${ROOT}etc/pbs_environment" ]]; then
cp "${ROOT}etc/pbs_environment" "${D}"/etc/pbs_environment || die
fi
echo "${PBS_SERVER_NAME}" > "${D}${PBS_SERVER_HOME}/server_name" || die
# Fix up the env.d file to use our set server home.
sed -i \
"s:/var/spool/torque:${PBS_SERVER_HOME}:g" "${D}"/etc/env.d/25torque \
|| die
if use munge; then
sed -i 's,\(PBS_USE_MUNGE=\).*,\11,' "${D}"etc/conf.d/torque || die
fi
}
pkg_postinst() {
pbs_createspool "${ROOT}"
elog " If this is the first time torque has been installed, then you are not"
elog "ready to start the server. Please refer to the documentation located at:"
elog "http://www.clusterresources.com/wiki/doku.php?id=torque:torque_wiki"
echo
elog " For a basic setup, you may use emerge --config ${PN}"
}
# root will be setup as the primary operator/manager, the local machine
# will be added as a node and we'll create a simple queue, batch.
pkg_config() {
local h="$(echo "${ROOT}/${PBS_SERVER_HOME}" | sed 's:///*:/:g')"
local rc=0
ebegin "Configuring Torque"
einfo "Using ${h} as the pbs homedir"
einfo "Using ${PBS_SERVER_NAME} as the pbs_server"
# Check for previous configuration and bail if found.
if [ -e "${h}/server_priv/acl_svr/operators" ] \
|| [ -e "${h}/server_priv/nodes" ] \
|| [ -e "${h}/mom_priv/config" ]; then
ewarn "Previous Torque configuration detected. Press Enter to"
ewarn "continue or Control-C to abort now"
read
fi
# pbs_mom configuration.
echo "\$pbsserver ${PBS_SERVER_NAME}" > "${h}/mom_priv/config" || die
echo "\$logevent 255" >> "${h}/mom_priv/config" || die
if use server; then
local qmgr="${ROOT}/usr/bin/qmgr -c"
# pbs_server bails on repeated backslashes.
if ! "${ROOT}"/usr/sbin/pbs_server -f -d "${h}" -t create; then
eerror "Failed to start pbs_server"
rc=1
else
${qmgr} "set server operators = root@$(hostname -f)" ${PBS_SERVER_NAME} \
&& ${qmgr} "create queue batch" ${PBS_SERVER_NAME} \
&& ${qmgr} "set queue batch queue_type = Execution" ${PBS_SERVER_NAME} \
&& ${qmgr} "set queue batch started = True" ${PBS_SERVER_NAME} \
&& ${qmgr} "set queue batch enabled = True" ${PBS_SERVER_NAME} \
&& ${qmgr} "set server default_queue = batch" ${PBS_SERVER_NAME} \
&& ${qmgr} "set server resources_default.nodes = 1" ${PBS_SERVER_NAME} \
&& ${qmgr} "set server scheduling = True" ${PBS_SERVER_NAME} \
|| die
"${ROOT}"/usr/bin/qterm -t quick ${PBS_SERVER_NAME} || rc=1
# Add the local machine as a node.
echo "$(hostname -f) np=1" > "${h}/server_priv/nodes" || die
fi
fi
eend ${rc}
}
^ permalink raw reply [flat|nested] 2+ messages in thread
* [gentoo-commits] gentoo-x86 commit in sys-cluster/torque: torque-2.5.13.ebuild ChangeLog
@ 2014-12-16 8:33 Jeroen Roovers (jer)
0 siblings, 0 replies; 2+ messages in thread
From: Jeroen Roovers (jer) @ 2014-12-16 8:33 UTC (permalink / raw
To: gentoo-commits
jer 14/12/16 08:33:26
Modified: torque-2.5.13.ebuild ChangeLog
Log:
Stable for HPPA (bug #491270).
(Portage version: 2.2.15/cvs/Linux x86_64, RepoMan options: --ignore-arches, signed Manifest commit with key A792A613)
Revision Changes Path
1.3 sys-cluster/torque/torque-2.5.13.ebuild
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/torque-2.5.13.ebuild?rev=1.3&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/torque-2.5.13.ebuild?rev=1.3&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/torque-2.5.13.ebuild?r1=1.2&r2=1.3
Index: torque-2.5.13.ebuild
===================================================================
RCS file: /var/cvsroot/gentoo-x86/sys-cluster/torque/torque-2.5.13.ebuild,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- torque-2.5.13.ebuild 16 Dec 2014 03:33:43 -0000 1.2
+++ torque-2.5.13.ebuild 16 Dec 2014 08:33:25 -0000 1.3
@@ -1,6 +1,6 @@
# Copyright 1999-2014 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-cluster/torque/torque-2.5.13.ebuild,v 1.2 2014/12/16 03:33:43 jsbronder Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-cluster/torque/torque-2.5.13.ebuild,v 1.3 2014/12/16 08:33:25 jer Exp $
EAPI=4
@@ -13,7 +13,7 @@
LICENSE="torque-2.5"
SLOT="0"
-KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86"
+KEYWORDS="~alpha ~amd64 hppa ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86"
IUSE="cpusets +crypt doc drmaa kernel_linux munge server static-libs +syslog threads tk xml"
# ed is used by makedepend-sh
1.176 sys-cluster/torque/ChangeLog
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/ChangeLog?rev=1.176&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/ChangeLog?rev=1.176&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-cluster/torque/ChangeLog?r1=1.175&r2=1.176
Index: ChangeLog
===================================================================
RCS file: /var/cvsroot/gentoo-x86/sys-cluster/torque/ChangeLog,v
retrieving revision 1.175
retrieving revision 1.176
diff -u -r1.175 -r1.176
--- ChangeLog 16 Dec 2014 03:33:43 -0000 1.175
+++ ChangeLog 16 Dec 2014 08:33:25 -0000 1.176
@@ -1,6 +1,9 @@
# ChangeLog for sys-cluster/torque
# Copyright 1999-2014 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-cluster/torque/ChangeLog,v 1.175 2014/12/16 03:33:43 jsbronder Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-cluster/torque/ChangeLog,v 1.176 2014/12/16 08:33:25 jer Exp $
+
+ 16 Dec 2014; Jeroen Roovers <jer@gentoo.org> torque-2.5.13.ebuild:
+ Stable for HPPA (bug #491270).
*torque-4.2.9-r2 (16 Dec 2014)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-12-16 8:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-16 8:33 [gentoo-commits] gentoo-x86 commit in sys-cluster/torque: torque-2.5.13.ebuild ChangeLog Jeroen Roovers (jer)
-- strict thread matches above, loose matches on Subject: below --
2014-06-19 19:55 Justin Bronder (jsbronder)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox