* [gentoo-commits] gentoo-x86 commit in mail-mta/exim: exim-4.84_rc1.ebuild ChangeLog
@ 2014-08-04 11:16 Fabian Groffen (grobian)
0 siblings, 0 replies; only message in thread
From: Fabian Groffen (grobian) @ 2014-08-04 11:16 UTC (permalink / raw
To: gentoo-commits
grobian 14/08/04 11:16:49
Modified: ChangeLog
Added: exim-4.84_rc1.ebuild
Log:
Version bump to 4.84 RC1
(Portage version: 2.2.10.1-prefix/cvs/SunOS i386, signed Manifest commit with key 0x5F75F607C5C74E89)
Revision Changes Path
1.286 mail-mta/exim/ChangeLog
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/mail-mta/exim/ChangeLog?rev=1.286&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/mail-mta/exim/ChangeLog?rev=1.286&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/mail-mta/exim/ChangeLog?r1=1.285&r2=1.286
Index: ChangeLog
===================================================================
RCS file: /var/cvsroot/gentoo-x86/mail-mta/exim/ChangeLog,v
retrieving revision 1.285
retrieving revision 1.286
diff -u -r1.285 -r1.286
--- ChangeLog 22 Jul 2014 18:23:17 -0000 1.285
+++ ChangeLog 4 Aug 2014 11:16:49 -0000 1.286
@@ -1,6 +1,12 @@
# ChangeLog for mail-mta/exim
# Copyright 1999-2014 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/mail-mta/exim/ChangeLog,v 1.285 2014/07/22 18:23:17 grobian Exp $
+# $Header: /var/cvsroot/gentoo-x86/mail-mta/exim/ChangeLog,v 1.286 2014/08/04 11:16:49 grobian Exp $
+
+*exim-4.84_rc1 (04 Aug 2014)
+
+ 04 Aug 2014; Fabian Groffen <grobian@gentoo.org> +exim-4.84_rc1.ebuild,
+ exim-4.82.1.ebuild, exim-4.83.ebuild:
+ Version bump to 4.84 RC1
*exim-4.83 (22 Jul 2014)
1.1 mail-mta/exim/exim-4.84_rc1.ebuild
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/mail-mta/exim/exim-4.84_rc1.ebuild?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/mail-mta/exim/exim-4.84_rc1.ebuild?rev=1.1&content-type=text/plain
Index: exim-4.84_rc1.ebuild
===================================================================
# Copyright 1999-2014 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/mail-mta/exim/exim-4.84_rc1.ebuild,v 1.1 2014/08/04 11:16:49 grobian Exp $
EAPI="5"
inherit eutils toolchain-funcs multilib pam systemd
IUSE="dcc +dkim dlfunc dmarc +dnsdb doc dovecot-sasl dsn exiscan-acl gnutls ipv6 ldap lmtp maildir mbx mysql nis pam perl pkcs11 postgres +prdr proxy radius redis sasl selinux spf sqlite srs ssl syslog tcpd tpda X"
REQUIRED_USE="spf? ( exiscan-acl ) srs? ( exiscan-acl ) dmarc? ( spf dkim ) pkcs11? ( gnutls )"
COMM_URI="ftp://ftp.exim.org/pub/exim/exim4$([[ ${PV} == *_rc* ]] && echo /test)"
DESCRIPTION="A highly configurable, drop-in replacement for sendmail"
SRC_URI="${COMM_URI}/${P//rc/RC}.tar.bz2
mirror://gentoo/system_filter.exim.gz
doc? ( ${COMM_URI}/${PN}-html-${PV//rc/RC}.tar.bz2 )"
HOMEPAGE="http://www.exim.org/"
SLOT="0"
LICENSE="GPL-2"
#KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~ppc ~ppc64 ~sparc ~x86 ~x86-fbsd ~x86-solaris"
KEYWORDS="~amd64 ~hppa ~x86-fbsd ~x86-solaris"
COMMON_DEPEND=">=sys-apps/sed-4.0.5
>=sys-libs/db-3.2
dev-libs/libpcre
perl? ( sys-devel/libperl )
pam? ( virtual/pam )
tcpd? ( sys-apps/tcp-wrappers )
ssl? ( dev-libs/openssl )
gnutls? ( net-libs/gnutls[pkcs11?]
dev-libs/libtasn1 )
ldap? ( >=net-nds/openldap-2.0.7 )
mysql? ( virtual/mysql )
postgres? ( dev-db/postgresql-base )
sasl? ( >=dev-libs/cyrus-sasl-2.1.26-r2 )
redis? ( dev-libs/hiredis )
selinux? ( sec-policy/selinux-exim )
spf? ( >=mail-filter/libspf2-1.2.5-r1 )
dmarc? ( mail-filter/opendmarc )
srs? ( mail-filter/libsrs_alt )
X? ( x11-proto/xproto
x11-libs/libX11
x11-libs/libXmu
x11-libs/libXt
x11-libs/libXaw
)
sqlite? ( dev-db/sqlite )
radius? ( net-dialup/radiusclient )
virtual/libiconv
"
# added X check for #57206
DEPEND="${COMMON_DEPEND}
virtual/pkgconfig"
RDEPEND="${COMMON_DEPEND}
!mail-mta/courier
!mail-mta/esmtp
!mail-mta/mini-qmail
!<mail-mta/msmtp-1.4.19-r1
!>=mail-mta/msmtp-1.4.19-r1[mta]
!mail-mta/netqmail
!mail-mta/nullmailer
!mail-mta/postfix
!mail-mta/qmail-ldap
!mail-mta/sendmail
!mail-mta/opensmtpd
!<mail-mta/ssmtp-2.64-r2
!>=mail-mta/ssmtp-2.64-r2[mta]
!net-mail/mailwrapper
>=net-mail/mailbase-0.00-r5
virtual/logger
dcc? ( mail-filter/dcc )
"
S=${WORKDIR}/${P//rc/RC}
src_prepare() {
epatch "${FILESDIR}"/exim-4.14-tail.patch
epatch "${FILESDIR}"/exim-4.74-localscan_dlopen.patch
epatch "${FILESDIR}"/exim-4.69-r1.27021.patch
epatch "${FILESDIR}"/exim-4.74-radius-db-ENV-clash.patch # 287426
epatch "${FILESDIR}"/exim-4.82-makefile-freebsd.patch # 235785
epatch "${FILESDIR}"/exim-4.77-as-needed-ldflags.patch # 352265, 391279
epatch "${FILESDIR}"/exim-4.76-crosscompile.patch # 266591
if use maildir ; then
epatch "${FILESDIR}"/exim-4.20-maildir.patch
else
epatch "${FILESDIR}"/exim-4.80-spool-mail-group.patch # 438606
fi
# user Exim believes it should be
MAILUSER=mail
MAILGROUP=mail
if use prefix && [[ ${EUID} != 0 ]] ; then
MAILUSER=$(id -un)
MAILGROUP=$(id -gn)
fi
}
src_configure() {
# general config and paths
sed -i.orig \
-e "/SYSTEM_ALIASES_FILE/s'SYSTEM_ALIASES_FILE'${EPREFIX}/etc/mail/aliases'" \
"${S}"/src/configure.default || die
sed -i -e 's/^buildname=.*/buildname=exim-gentoo/g' Makefile || die
sed -e "48i\CFLAGS=${CFLAGS}" \
-e "s:BIN_DIRECTORY=/usr/exim/bin:BIN_DIRECTORY=${EPREFIX}/usr/sbin:" \
-e "s:EXIM_USER=:EXIM_USER=${MAILUSER}:" \
-e "s:CONFIGURE_FILE=/usr/exim/configure:CONFIGURE_FILE=${EPREFIX}/etc/exim/exim.conf:" \
-e "s:ZCAT_COMMAND=.*$:ZCAT_COMMAND=${EPREFIX}/bin/zcat:" \
-e "s:COMPRESS_COMMAND=.*$:COMPRESS_COMMAND=${EPREFIX}/bin/gzip:" \
src/EDITME > Local/Makefile
cd Local
cat >> Makefile <<- EOC
INFO_DIRECTORY=${EPREFIX}/usr/share/info
PID_FILE_PATH=${EPREFIX}/run/exim.pid
SPOOL_DIRECTORY=${EPREFIX}/var/spool/exim
HAVE_ICONV=yes
EOC
# if we use libiconv, now is the time to tell so
use !elibc_glibc && echo "EXTRALIBS_EXIM=-liconv" >> Makefile
# support for IPv6
if use ipv6; then
cat >> Makefile <<- EOC
HAVE_IPV6=YES
EOC
fi
#
# mail storage formats
# mailstore is Exim's traditional storage format
cat >> Makefile <<- EOC
SUPPORT_MAILSTORE=yes
EOC
# mbox
if use mbx; then
cat >> Makefile <<- EOC
SUPPORT_MBX=yes
EOC
fi
# maildir
if use maildir; then
cat >> Makefile <<- EOC
SUPPORT_MAILDIR=yes
EOC
fi
#
# lookup methods
# use the "native" interface to the DBM library, support passwd
# and directory lookups by default
cat >> Makefile <<- EOC
USE_DB=yes
DBMLIB=-ldb
LOOKUP_PASSWD=yes
LOOKUP_DSEARCH=yes
EOC
if ! use dnsdb; then
# DNSDB lookup is enabled by default
sed -i "s:^LOOKUP_DNSDB=yes:# LOOKUP_DNSDB=yes:" Makefile
fi
if use ldap; then
cat >> Makefile <<- EOC
LOOKUP_LDAP=yes
LDAP_LIB_TYPE=OPENLDAP2
LOOKUP_INCLUDE += -I${EROOT}usr/include/ldap
LOOKUP_LIBS += -lldap -llber
EOC
fi
if use mysql; then
cat >> Makefile <<- EOC
LOOKUP_MYSQL=yes
LOOKUP_INCLUDE += $(mysql_config --include)
LOOKUP_LIBS += $(mysql_config --libs)
EOC
fi
if use nis; then
cat >> Makefile <<- EOC
LOOKUP_NIS=yes
LOOKUP_NISPLUS=yes
EOC
fi
if use postgres; then
cat >> Makefile <<- EOC
LOOKUP_PGSQL=yes
LOOKUP_INCLUDE += -I$(pg_config --includedir)
LOOKUP_LIBS += -L$(pg_config --libdir) -lpq
EOC
fi
if use sqlite; then
cat >> Makefile <<- EOC
LOOKUP_SQLITE=yes
LOOKUP_SQLITE_PC=sqlite3
EOC
fi
if use redis; then
cat >> Makefile <<- EOC
EXPERIMENTAL_REDIS=yes
LOOKUP_LIBS += -lhiredis
EOC
fi
#
# Exim monitor, enabled by default, controlled via X USE-flag,
# disable if not requested, bug #46778
if use X; then
cp ../exim_monitor/EDITME eximon.conf || die
else
sed -i -e '/^EXIM_MONITOR=/s/^/# /' Makefile
fi
#
# features
# content scanning support
if use exiscan-acl; then
cat >> Makefile <<- EOC
WITH_CONTENT_SCAN=yes
WITH_OLD_DEMIME=yes
EOC
fi
# DomainKeys Identified Mail, RFC4871
if ! use dkim; then
# DKIM is enabled by default
cat >> Makefile <<- EOC
DISABLE_DKIM=yes
EOC
fi
# Per-Recipient-Data-Response
if ! use prdr; then
# PRDR is enabled by default
cat >> Makefile <<- EOC
DISABLE_PRDR=yes
EOC
fi
# log to syslog
if use syslog; then
sed -i "s:LOG_FILE_PATH=/var/log/exim/exim_%s.log:LOG_FILE_PATH=syslog:" Makefile
cat >> Makefile <<- EOC
LOG_FILE_PATH=syslog
EOC
else
cat >> Makefile <<- EOC
LOG_FILE_PATH=${EPREFIX}/var/log/exim/exim_%s.log
EOC
fi
# starttls support (ssl)
if use ssl; then
echo "SUPPORT_TLS=yes" >> Makefile
if use gnutls; then
echo "USE_GNUTLS=yes" >> Makefile
echo "USE_GNUTLS_PC=gnutls" >> Makefile
use pkcs11 || echo "AVOID_GNUTLS_PKCS11=yes" >> Makefile
else
echo "USE_OPENSSL_PC=openssl" >> Makefile
fi
fi
# TCP wrappers
if use tcpd; then
cat >> Makefile <<- EOC
USE_TCP_WRAPPERS=yes
EXTRALIBS_EXIM += -lwrap
EOC
fi
# Light Mail Transport Protocol
if use lmtp; then
cat >> Makefile <<- EOC
TRANSPORT_LMTP=yes
EOC
fi
# embedded Perl
if use perl; then
cat >> Makefile <<- EOC
EXIM_PERL=perl.o
EOC
fi
# dlfunc
if use dlfunc; then
cat >> Makefile <<- EOC
EXPAND_DLFUNC=yes
EOC
fi
#
# experimental features
# Distributed Checksum Clearinghouse
if use dcc; then
echo "EXPERIMENTAL_DCC=yes">> Makefile
fi
# Sender Policy Framework
if use spf; then
cat >> Makefile <<- EOC
EXPERIMENTAL_SPF=yes
EXTRALIBS_EXIM += -lspf2
EOC
fi
# Sender Rewriting Scheme
if use srs; then
cat >> Makefile <<- EOC
EXPERIMENTAL_SRS=yes
EXTRALIBS_EXIM += -lsrs_alt
EOC
fi
# DMARC
if use dmarc; then
cat >> Makefile <<- EOC
EXPERIMENTAL_DMARC=yes
EXTRALIBS_EXIM += -lopendmarc
EOC
fi
# Transport post-delivery actions
if use tpda; then
cat >> Makefile <<- EOC
EXPERIMENTAL_TPDA=yes
EOC
fi
# Proxy Protocol
if use proxy; then
cat >> Makefile <<- EOC
EXPERIMENTAL_PROXY=yes
EOC
fi
# Delivery Sender Notifications
if use dsn; then
cat >> Makefile <<- EOC
EXPERIMENTAL_DSN=yes
EOC
fi
#
# authentication (SMTP AUTH)
# standard bits
cat >> Makefile <<- EOC
AUTH_SPA=yes
AUTH_CRAM_MD5=yes
AUTH_PLAINTEXT=yes
EOC
# Cyrus SASL
if use sasl; then
cat >> Makefile <<- EOC
CYRUS_SASLAUTHD_SOCKET=${EPREFIX}/run/saslauthd/mux
AUTH_CYRUS_SASL=yes
AUTH_LIBS += -lsasl2
EOC
fi
# Dovecot
if use dovecot-sasl; then
cat >> Makefile <<- EOC
AUTH_DOVECOT=yes
EOC
fi
# Pluggable Authentication Modules
if use pam; then
cat >> Makefile <<- EOC
SUPPORT_PAM=yes
AUTH_LIBS += -lpam
EOC
fi
# Radius
if use radius; then
cat >> Makefile <<- EOC
RADIUS_CONFIG_FILE=${EPREFIX}/etc/radiusclient/radiusclient.conf
RADIUS_LIB_TYPE=RADIUSCLIENT
AUTH_LIBS += -lradiusclient
EOC
fi
}
src_compile() {
emake -j1 CC="$(tc-getCC)" HOSTCC="$(tc-getCC $CBUILD)" \
AR="$(tc-getAR) cq" RANLIB="$(tc-getRANLIB)" FULLECHO='' \
|| die "make failed"
}
src_install () {
cd "${S}"/build-exim-gentoo
exeinto /usr/sbin
doexe exim
if use X; then
doexe eximon.bin
doexe eximon
fi
fperms 4755 /usr/sbin/exim
dodir /usr/bin /usr/sbin /usr/lib
dosym exim /usr/sbin/sendmail
dosym exim /usr/sbin/rsmtp
dosym exim /usr/sbin/rmail
dosym /usr/sbin/exim /usr/bin/mailq
dosym /usr/sbin/exim /usr/bin/newaliases
dosym /usr/sbin/sendmail /usr/lib/sendmail
exeinto /usr/sbin
for i in exicyclog exim_dbmbuild exim_dumpdb exim_fixdb exim_lock \
exim_tidydb exinext exiwhat exigrep eximstats exiqsumm exiqgrep \
convert4r3 convert4r4 exipick
do
doexe $i
done
dodoc "${S}"/doc/*
doman "${S}"/doc/exim.8
use dsn && dodoc "${S}"/README.DSN
use doc && dohtml -r "${WORKDIR}"/${PN}-html-${PV//rc/RC}/doc/html/spec_html/*
# conf files
insinto /etc/exim
newins "${S}"/src/configure.default.orig exim.conf.dist
if use exiscan-acl; then
newins "${S}"/src/configure.default exim.conf.exiscan-acl
fi
doins "${WORKDIR}"/system_filter.exim
doins "${FILESDIR}"/auth_conf.sub
pamd_mimic system-auth exim auth account
# headers, #436406
if use dlfunc ; then
# fixup includes so they actually can be found when including
sed -i \
-e '/#include "\(config\|store\|mytypes\).h"/s:"\(.\+\)":<exim/\1>:' \
local_scan.h || die
insinto /usr/include/exim
doins {config,local_scan}.h ../src/{mytypes,store}.h
fi
insinto /etc/logrotate.d
newins "${FILESDIR}/exim.logrotate" exim
newinitd "${FILESDIR}"/exim.rc8 exim
newconfd "${FILESDIR}"/exim.confd exim
systemd_dounit "${FILESDIR}"/{exim.service,exim.socket,exim-submission.socket}
systemd_newunit "${FILESDIR}"/exim_at.service 'exim@.service'
systemd_newunit "${FILESDIR}"/exim-submission_at.service 'exim-submission@.service'
DIROPTIONS="-m 0750 -o ${MAILUSER} -g ${MAILGROUP}"
dodir /var/log/${PN}
}
pkg_postinst() {
if [[ ! -f ${EROOT}etc/exim/exim.conf ]] ; then
einfo "${EROOT}etc/exim/system_filter.exim is a sample system_filter."
einfo "${EROOT}etc/exim/auth_conf.sub contains the configuration sub for using smtp auth."
einfo "Please create ${EROOT}etc/exim/exim.conf from ${EROOT}etc/exim/exim.conf.dist."
fi
if use dcc ; then
einfo "DCC support is experimental, you can find some limited"
einfo "documentation at the bottom of this prerelease message:"
einfo "http://article.gmane.org/gmane.mail.exim.devel/3579"
fi
use spf && einfo "SPF support is experimental"
use srs && einfo "SRS support is experimental"
if use dmarc ; then
einfo "DMARC support is experimental. See global settings to"
einfo "configure DMARC, for usage see the documentation at "
einfo "experimental-spec.txt."
fi
use tpda && einfo "TPDA support is experimental"
use proxy && einfo "proxy support is experimental"
if use dsn ; then
einfo "Starting from Exim 4.83, DSN support comes from upstream."
einfo "DSN support is an experimental feature. If you used DSN"
einfo "support prior to 4.83, make sure to remove all dsn_process"
einfo "switches from your routers, see http://bugs.gentoo.org/511818"
fi
einfo "Exim maintains some db files under its spool directory that need"
einfo "cleaning from time to time. (${EROOT}var/spool/exim/db)"
einfo "Please use the exim_tidydb tool as documented in the Exim manual:"
einfo "http://www.exim.org/exim-html-current/doc/html/spec_html/ch-exim_utilities.html#SECThindatmai"
}
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-08-04 11:16 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-08-04 11:16 [gentoo-commits] gentoo-x86 commit in mail-mta/exim: exim-4.84_rc1.ebuild ChangeLog Fabian Groffen (grobian)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox