* [gentoo-commits] gentoo-x86 commit in app-admin/webmin: webmin-1.680.ebuild ChangeLog webmin-1.630.ebuild webmin-1.660.ebuild webmin-1.620.ebuild
@ 2014-05-01 16:30 Markos Chandras (hwoarang)
0 siblings, 0 replies; only message in thread
From: Markos Chandras (hwoarang) @ 2014-05-01 16:30 UTC (permalink / raw
To: gentoo-commits
hwoarang 14/05/01 16:30:10
Modified: ChangeLog
Added: webmin-1.680.ebuild
Removed: webmin-1.630.ebuild webmin-1.660.ebuild
webmin-1.620.ebuild
Log:
Version bump. Remove old versions. Bug #504782 by PhobosK <phobosk@fastmail.fm>
(Portage version: 2.2.10/cvs/Linux x86_64, signed Manifest commit with key 09BF4F54C2BA7F3C!)
Revision Changes Path
1.206 app-admin/webmin/ChangeLog
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/app-admin/webmin/ChangeLog?rev=1.206&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/app-admin/webmin/ChangeLog?rev=1.206&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/app-admin/webmin/ChangeLog?r1=1.205&r2=1.206
Index: ChangeLog
===================================================================
RCS file: /var/cvsroot/gentoo-x86/app-admin/webmin/ChangeLog,v
retrieving revision 1.205
retrieving revision 1.206
diff -u -r1.205 -r1.206
--- ChangeLog 21 Nov 2013 07:24:43 -0000 1.205
+++ ChangeLog 1 May 2014 16:30:09 -0000 1.206
@@ -1,6 +1,13 @@
# ChangeLog for app-admin/webmin
-# Copyright 1999-2013 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/app-admin/webmin/ChangeLog,v 1.205 2013/11/21 07:24:43 patrick Exp $
+# Copyright 1999-2014 Gentoo Foundation; Distributed under the GPL v2
+# $Header: /var/cvsroot/gentoo-x86/app-admin/webmin/ChangeLog,v 1.206 2014/05/01 16:30:09 hwoarang Exp $
+
+*webmin-1.680 (01 May 2014)
+
+ 01 May 2014; Markos Chandras <hwoarang@gentoo.org> +webmin-1.680.ebuild,
+ -webmin-1.620.ebuild, -webmin-1.630.ebuild, -webmin-1.660.ebuild:
+ Version bump. Remove old versions. Bug #504782 by PhobosK
+ <phobosk@fastmail.fm>
*webmin-1.660 (21 Nov 2013)
1.1 app-admin/webmin/webmin-1.680.ebuild
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/app-admin/webmin/webmin-1.680.ebuild?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/app-admin/webmin/webmin-1.680.ebuild?rev=1.1&content-type=text/plain
Index: webmin-1.680.ebuild
===================================================================
# Copyright 1999-2014 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/app-admin/webmin/webmin-1.680.ebuild,v 1.1 2014/05/01 16:30:09 hwoarang Exp $
EAPI="3"
inherit eutils pam ssl-cert
DESCRIPTION="A web-based Unix systems administration interface"
HOMEPAGE="http://www.webmin.com/"
SRC_URI="minimal? ( mirror://sourceforge/webadmin/${P}-minimal.tar.gz )
!minimal? ( mirror://sourceforge/webadmin/${P}.tar.gz )"
LICENSE="BSD GPL-2"
SLOT="0"
KEYWORDS="~amd64 ~x86"
# NOTE: The ssl flag auto added by ssl-cert eclass is not used actually
# because openssl is forced by dev-perl/Net-SSLeay
IUSE="minimal +ssl mysql postgres ldap"
# All the required perl modules can be found easily using (in Webmin's root src dir):
# find . -name cpan_modules.pl -exec grep "::" {} \;
# NOTE: If Webmin doesn't find the required perl modules, it offers(runtime) the user
# to install them using the in-built cpan module, and this will mess up perl on the system
# That's why some modules are forced without a use flag
# NOTE: pam, ssl and dnssec-tools deps are forced for security and Gentoo compliance installation reasons
DEPEND="virtual/perl-Sys-Syslog
virtual/perl-Time-HiRes
virtual/perl-Time-Local
dev-perl/Authen-Libwrap
dev-perl/IO-Tty
dev-perl/MD5
dev-perl/Net-SSLeay
dev-perl/Authen-PAM
dev-perl/Sys-Hostname-Long
>=net-dns/dnssec-tools-1.13
!minimal? (
mysql? ( dev-perl/DBD-mysql )
postgres? ( dev-perl/DBD-Pg )
ldap? ( dev-perl/perl-ldap )
dev-perl/XML-Generator
dev-perl/XML-Parser
)"
RDEPEND="${DEPEND}"
src_prepare() {
local perl="$( which perl )"
# Remove the unnecessary and incompatible files
rm -rf acl/Authen-SolarisRBAC-0.1*
if ! use minimal ; then
rm -rf {format,{bsd,hpux,sgi}exports,zones,rbac}
rm -f mount/{free,net,open}bsd-mounts*
rm -f mount/macos-mounts*
fi
# For security reasons remove the SSL certificate that comes with Webmin
# We will create our own later
rm -f miniserv.pem
# Remove the Webmin setup scripts to avoid Webmin in runtime to mess up config
# We will use our own later
rm -f setup.{sh,pl}
# Set the installation type/mode to Gentoo
echo "gentoo" > install-type
# Fix the permissions of the install files
chmod -R og-w "${S}"
# Since we should not modify any files after install
# we set the perl path in all cgi and pl files here using Webmin's routines
# The pl file is Prefix safe and works only on provided input, no other filesystem files
ebegin "Fixing perl path in source files"
(find "${S}" -name '*.cgi' -print ; find "${S}" -name '*.pl' -print) | $perl "${S}"/perlpath.pl $perl -
eend $?
}
src_install() {
# Create config dir and keep
diropts -m0755
dodir /etc/webmin
keepdir /etc/webmin
# Create install dir
# Third party modules installed through Webmin go here too, so keep
dodir /usr/libexec/webmin
keepdir /usr/libexec/webmin
# Copy our own setup script to installation folder
insinto /usr/libexec/webmin
newins "${FILESDIR}"/gentoo-setup gentoo-setup.sh
fperms 0744 /usr/libexec/webmin/gentoo-setup.sh
# This is here if we ever want in future ebuilds to add some specific
# config values in the /etc/webmin/miniserv.conf
# The format of this file should be the same as the one of miniserv.conf:
# var=value
#
# Uncomment it if you use such file. Before that check if upstream
# has this file in root dir too.
#newins "${FILESDIR}/miniserv-conf" miniserv-conf
# Create the log dir and keep
diropts -m0700
dodir /var/log/webmin
keepdir /var/log/webmin
# Create the init.d file and put the neccessary variables there
newinitd "${FILESDIR}"/init.d.webmin webmin
sed -i \
-e "s:%exe%:${EROOT}usr/libexec/webmin/miniserv.pl:" \
-e "s:%pid%:${EROOT}var/run/webmin.pid:" \
-e "s:%conf%:${EROOT}etc/webmin/miniserv.conf:" \
-e "s:%perllib%:${EROOT}usr/libexec/webmin:" \
"${ED}etc/init.d/webmin" \
|| die "Failed to patch the webmin init file"
# Setup pam
pamd_mimic system-auth webmin auth account session
# Copy files to installation folder
ebegin "Copying install files to destination"
cp -pPR "${S}"/* "${ED}usr/libexec/webmin"
eend $?
}
pkg_preinst() {
# First stop service if running so Webmin to not messup our config
ebegin "Stopping any running Webmin instance prior merging"
rc-service --ifexists -- webmin --ifstarted stop
eend $?
}
pkg_postinst() {
# Run pkg_config phase first - non interactively
export INTERACTIVE="no"
pkg_config
# Every next time pkg_config should be interactive
INTERACTIVE="yes"
ewarn
ewarn "Bare in mind that not all Webmin modules are Gentoo tweaked and may have some issues."
ewarn "Always be careful when using modules that modify init entries, do update of webmin, install CPAN modules etc."
ewarn "To avoid problems, please before using any module, look at its configuration options first."
ewarn "(Usually there is a link at top in the right pane of Webmin for configuring the module.)"
ewarn
elog "- To make Webmin start at boot time, run: 'rc-update add webmin default'"
elog "- The default URL to connect to Webmin is: https://localhost:10000"
elog "- The default user that can login is: root"
elog "- To reconfigure Webmin in case of problems run 'emerge --config app-admin/webmin'"
}
pkg_prerm() {
# First stop service if running - we do not want Webmin to mess up config
ebegin "Stopping any running Webmin instance prior unmerging"
rc-service --ifexists -- webmin --ifstarted stop
eend $?
}
pkg_postrm() {
ewarn
ewarn "You have uninstalled Webmin, so have in mind that all cron jobs scheduled"
ewarn "by Webmin for its own modules, are left active and they will fail when Webmin is missing."
ewarn "To fix this just disable them if you intend to use Webmin again,"
ewarn "OR delete them if not."
ewarn
}
pkg_config(){
# First stop service if running
ebegin "Stopping any running Webmin instance"
rc-service --ifexists -- webmin --ifstarted stop
eend $?
# Next set the default reset variable to 'none'
# reset/_reset can be:
# 'none' - does not reset anything, just upgrades if a conf is present
# OR installs new conf if a conf is missing
# 'soft' - deletes only $config_dir/config file and thus resetting most
# conf values to their defaults. Keeps the specific Webmin cron jobs
# 'hard' - deletes all files in $config_dir (keeping the .keep_* Gentoo file)
# and thus resetting all Webmin. Deletes the specific Webmin cron jobs too.
local _reset="none"
# If in interactive mode ask user what should we do
if [[ "${INTERACTIVE}" = "yes" ]]; then
einfo
einfo "Please enter the number of the action you would like to perform?"
einfo
einfo "1. Update configuration"
einfo " (keeps old config options and adds the new ones)"
einfo "2. Soft reset configuration"
einfo " (keeps some old config options, the other options are set to default)"
ewarn " All Webmin users will be reset"
einfo "3. Hard reset configuration"
einfo " (all options including module options are set to default)"
ewarn " You will lose all Webmin configuration options you have done till now"
einfo "4. Exit this configuration utility (default)"
while [ "$correct" != "true" ] ; do
read answer
if [[ "$answer" = "1" ]] ; then
_reset="none"
correct="true"
elif [[ "$answer" = "2" ]] ; then
_reset="soft"
correct="true"
elif [[ "$answer" = "3" ]] ; then
_reset="hard"
correct="true"
elif [ "$answer" = "4" -o "$answer" = "" ] ; then
die "User aborted configuration."
else
echo "Answer not recognized. Enter a number from 1 to 4"
fi
done
if [[ "$_reset" = "hard" ]]; then
while [ "$sure" != "true" ] ; do
ewarn "You will lose all Webmin configuration options you have done till now."
ewarn "Are you sure you want to do this? (y/n)"
read answer
if [[ $answer =~ ^[Yy]([Ee][Ss])?$ ]] ; then
sure="true"
elif [[ $answer =~ ^[Nn]([Oo])?$ ]] ; then
die "User aborted configuration."
else
echo "Answer not recognized. Enter 'y' or 'n'"
fi
done
fi
fi
export reset=$_reset
# Create ssl certificate for Webmin if there is not one in the proper place
if [[ ! -e "${EROOT}etc/ssl/webmin/server.pem" ]]; then
SSL_ORGANIZATION="${SSL_ORGANIZATION:-Webmin Server}"
SSL_COMMONNAME="${SSL_COMMONNAME:-*}"
install_cert "${EROOT}/etc/ssl/webmin/server"
fi
# Ensure all paths passed to the setup script use EROOT
export wadir="${EROOT}usr/libexec/webmin"
export config_dir="${EROOT}etc/webmin"
export var_dir="${EROOT}var/log/webmin"
export tempdir="${T}"
export pidfile="${EROOT}var/run/webmin.pid"
export perl="$( which perl )"
export os_type='gentoo-linux'
export os_version='*'
export real_os_type='Gentoo Linux'
export real_os_version='Any version'
# Forcing 'ssl', 'ssl_redirect' and 'no_sslcompression' for tightening security
export ssl=1
export ssl_redirect=1
export no_sslcompression=1
export keyfile="${EROOT}etc/ssl/webmin/server.pem"
export port=10000
export atboot=0
einfo "Executing Webmin's configure script"
$wadir/gentoo-setup.sh
einfo "Configuration of Webmin done"
}
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-05-01 16:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-01 16:30 [gentoo-commits] gentoo-x86 commit in app-admin/webmin: webmin-1.680.ebuild ChangeLog webmin-1.630.ebuild webmin-1.660.ebuild webmin-1.620.ebuild Markos Chandras (hwoarang)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox