* [gentoo-commits] gentoo-x86 commit in sci-libs/linux-gpib: ChangeLog linux-gpib-3.2.16.ebuild
@ 2011-05-14 17:05 Andreas HAttel (dilfridge)
0 siblings, 0 replies; only message in thread
From: Andreas HAttel (dilfridge) @ 2011-05-14 17:05 UTC (permalink / raw
To: gentoo-commits
dilfridge 11/05/14 17:05:08
Modified: ChangeLog
Added: linux-gpib-3.2.16.ebuild
Log:
Version bump with build fix
(Portage version: 2.1.9.49/cvs/Linux x86_64)
Revision Changes Path
1.2 sci-libs/linux-gpib/ChangeLog
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sci-libs/linux-gpib/ChangeLog?rev=1.2&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sci-libs/linux-gpib/ChangeLog?rev=1.2&content-type=text/plain
diff : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sci-libs/linux-gpib/ChangeLog?r1=1.1&r2=1.2
Index: ChangeLog
===================================================================
RCS file: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/ChangeLog,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- ChangeLog 31 Jan 2011 22:29:39 -0000 1.1
+++ ChangeLog 14 May 2011 17:05:08 -0000 1.2
@@ -1,6 +1,12 @@
# ChangeLog for sci-libs/linux-gpib
# Copyright 1999-2011 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/ChangeLog,v 1.1 2011/01/31 22:29:39 dilfridge Exp $
+# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/ChangeLog,v 1.2 2011/05/14 17:05:08 dilfridge Exp $
+
+*linux-gpib-3.2.16 (14 May 2011)
+
+ 14 May 2011; Andreas K. Huettel <dilfridge@gentoo.org>
+ +linux-gpib-3.2.16.ebuild:
+ Version bump with bugfix
*linux-gpib-3.2.15 (31 Jan 2011)
1.1 sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild
file : http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild?rev=1.1&view=markup
plain: http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild?rev=1.1&content-type=text/plain
Index: linux-gpib-3.2.16.ebuild
===================================================================
# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild,v 1.1 2011/05/14 17:05:08 dilfridge Exp $
EAPI=4
inherit base linux-mod autotools
DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
HOMEPAGE="http://linux-gpib.sourceforge.net/"
SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz
firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~amd64 ~x86"
IUSE="pcmcia static debug guile perl php python tcl doc firmware"
RDEPEND="
tcl? ( dev-lang/tcl )
guile? ( dev-scheme/guile )
perl? ( dev-lang/perl )
php? ( dev-lang/php )
python? ( dev-lang/python )
firmware? ( sys-apps/fxload )
"
DEPEND="${RDEPEND}
sys-kernel/module-rebuild
doc? ( app-text/docbook-sgml-utils )
"
PATCHES=( "${FILESDIR}/${PN}-3.2.15-build.patch" )
pkg_setup () {
linux-mod_pkg_setup
case ${KV_MINOR} in
4) die "This version of Linux-GPIB requires a version 2.6.x of the Linux kernel. 2.4.x kernels are supported by Linux-GPIB versions 3.1.x." ;;
6) ;;
*) die "Unsupported kernel version '${KV_FULL}'." ;;
esac
if [ ${KV_PATCH} -lt 8 ] ; then
die "Kernel versions older than 2.6.8 are not supported."
fi
}
src_prepare () {
base_src_prepare
eautoreconf
}
src_configure() {
set_arch_to_kernel
econf \
$(use_enable pcmcia) \
$(use_enable static) \
$(use_enable debug driver-debug) \
$(use_enable guile guile-binding) \
$(use_enable perl perl-binding) \
$(use_enable php php-binding) \
$(use_enable python python-binding) \
$(use_enable tcl tcl-binding) \
$(use_enable doc documentation) \
--with-linux-srcdir=${KV_DIR} \
|| die
}
src_install () {
set_arch_to_kernel
FIRM_DIR=/usr/share/usb
# Here I changed the sbindir in order to install the gpib_config to /sbin,
# not /usr/sbin. This is done to enable running gpib_config from
# the modprobe.conf file: if /usr is not in the root file system,
# but a mounted partition then gpib_congig cannot be found in the moment when
# modprobe is run.
make \
DESTDIR=${D} \
INSTALL_MOD_PATH=${D} \
HOTPLUG_USB_CONF_DIR=${D}/etc/hotplug/usb \
USB_FIRMWARE_DIR=${D}${FIRM_DIR} \
docdir=/usr/share/doc/${PF}/html \
install || die "install problem"
echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
insinto /etc/udev/rules.d/
doins 99-gpib.rules
dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
insinto /etc
newins util/templates/gpib.conf gpib.conf
newins util/templates/gpib.conf gpib.conf.example
if use pcmcia ; then
dodir /etc/pcmcia
insinto /etc/pcmcia
doins "${S}"/etc/pcmcia/*
fi
if use firmware ; then
insinto "${FIRM_DIR}/agilent_8237a"
doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_8237a/*
insinto "${FIRM_DIR}/ni_gpib_usb_b"
doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
insinto "/usr/share/linux-gpib/hp_82341"
doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/*
fi
}
pkg_preinst () {
linux-mod_pkg_preinst
enewgroup gpib
}
pkg_postinst () {
linux-mod_pkg_postinst
einfo "You need to run the 'gpib_config' utility to setup the driver before"
einfo "you can use it. In order to do it automatically you can add to your"
einfo "start script something like this (supposing the appropriate driver"
einfo "is loaded on the startup):"
einfo " gpib_config --minor 0"
einfo ""
einfo "To give a user access to the computer's gpib board you will have to add"
einfo "them to the group 'gpib' or, you could change the permissions on the device"
einfo "files /dev/gpib[0-15] to something you like better, using 'chmod'."
einfo ""
einfo "Edit /etc/gpib.conf to match your interface board, and any devices you wish"
einfo "to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for"
einfo "more information."
einfo ""
if use pcmcia ; then
einfo "For PCMCIA cards:"
einfo "All files needed for a PCMCIA board were copied to /etc/pcmcia."
einfo "You may wish to edit the options passed to the gpib_config call in the"
einfo "/etc/pcmcia/linux-gpib-pcmcia script."
einfo "You may need to send a SIGHUP signal to the cardmgr daemon to force it"
einfo "to reload the files in /etc/pcmcia (alternatively you could use your"
einfo "pcmcia init.d script to restart the cardmgr, or you could just reboot)."
einfo "The driver module will be loaded as needed by the cardmgr."
einfo ""
fi
if use firmware ; then
einfo "For Agilent (HP) 82341C and 82341D cards:"
einfo "The firmware for these boards is uploaded by passing the appropriate"
einfo "firmware file from /usr/share/linux-gpib/hp_82341 directory to"
einfo "gpib_config using the -I or --init-data command line option. Example:"
einfo "gpib_config --minor 0 --init-data \\"
einfo "/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin"
einfo ""
fi
}
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-05-14 17:05 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-14 17:05 [gentoo-commits] gentoo-x86 commit in sci-libs/linux-gpib: ChangeLog linux-gpib-3.2.16.ebuild Andreas HAttel (dilfridge)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox