* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2024-11-08 17:18 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2024-11-08 17:18 UTC (permalink / raw
To: gentoo-commits
commit: bcbf39e959ee87a3f4a7b0d2d41c26af8c6a1d5d
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Fri Nov 8 17:16:06 2024 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Fri Nov 8 17:16:06 2024 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=bcbf39e9
net-misc/curl: add 8.10.1-r1, drop 8.10.1
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/{curl-8.10.1.ebuild => curl-8.10.1-r1.ebuild} | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net-misc/curl/curl-8.10.1.ebuild b/net-misc/curl/curl-8.10.1-r1.ebuild
similarity index 98%
rename from net-misc/curl/curl-8.10.1.ebuild
rename to net-misc/curl/curl-8.10.1-r1.ebuild
index f49ba20..cfe9c3e 100644
--- a/net-misc/curl/curl-8.10.1.ebuild
+++ b/net-misc/curl/curl-8.10.1-r1.ebuild
@@ -21,7 +21,7 @@ else
https://curl.se/download/${P}.tar.xz
verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
"
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+ KEYWORDS="~alpha amd64 arm arm64 ~hppa ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
fi
LICENSE="BSD curl ISC test? ( BSD-4 )"
@@ -110,7 +110,7 @@ RDEPEND="
>=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
)
rustls? (
- >=net-libs/rustls-ffi-0.13.0:=[${MULTILIB_USEDEP}]
+ >=net-libs/rustls-ffi-0.14.0:=[${MULTILIB_USEDEP}]
)
)
zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
^ permalink raw reply related [flat|nested] 10+ messages in thread* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2025-02-07 15:41 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2025-02-07 15:41 UTC (permalink / raw
To: gentoo-commits
commit: 7ac28c4a790880b4b4cc6d99e7a1e535b2817a86
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Fri Feb 7 15:38:56 2025 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Fri Feb 7 15:39:35 2025 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=7ac28c4a
net-misc/curl: fix IUSE again
I was overly cautious in the previous commit.
Fixes: be2e20899c222b91adfd6c9f4636b44e908a15e6
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/curl-8.10.1-r2.ebuild | 2 +-
net-misc/curl/curl-8.11.1-r2.ebuild | 2 +-
net-misc/curl/curl-8.12.0.ebuild | 2 +-
net-misc/curl/curl-8.9.1-r2.ebuild | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/net-misc/curl/curl-8.10.1-r2.ebuild b/net-misc/curl/curl-8.10.1-r2.ebuild
index 65fa2b6..9dda829 100644
--- a/net-misc/curl/curl-8.10.1-r2.ebuild
+++ b/net-misc/curl/curl-8.10.1-r2.ebuild
@@ -90,7 +90,7 @@ RDEPEND="
psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
quic? (
curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[-gnutls,ssl,openssl,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,openssl,${MULTILIB_USEDEP}] )
)
rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
diff --git a/net-misc/curl/curl-8.11.1-r2.ebuild b/net-misc/curl/curl-8.11.1-r2.ebuild
index 9c19c5d..5f68dfe 100644
--- a/net-misc/curl/curl-8.11.1-r2.ebuild
+++ b/net-misc/curl/curl-8.11.1-r2.ebuild
@@ -90,7 +90,7 @@ RDEPEND="
psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
quic? (
curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[-gnutls,ssl,openssl,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,openssl,${MULTILIB_USEDEP}] )
)
rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
diff --git a/net-misc/curl/curl-8.12.0.ebuild b/net-misc/curl/curl-8.12.0.ebuild
index f8f62b3..8e9833f 100644
--- a/net-misc/curl/curl-8.12.0.ebuild
+++ b/net-misc/curl/curl-8.12.0.ebuild
@@ -90,7 +90,7 @@ RDEPEND="
psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
quic? (
curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[-gnutls,ssl,openssl,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,openssl,${MULTILIB_USEDEP}] )
)
rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
diff --git a/net-misc/curl/curl-8.9.1-r2.ebuild b/net-misc/curl/curl-8.9.1-r2.ebuild
index 57eca53..aa6c650 100644
--- a/net-misc/curl/curl-8.9.1-r2.ebuild
+++ b/net-misc/curl/curl-8.9.1-r2.ebuild
@@ -90,7 +90,7 @@ RDEPEND="
psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
quic? (
curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[-gnutls,ssl,openssl,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,openssl,${MULTILIB_USEDEP}] )
)
rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
^ permalink raw reply related [flat|nested] 10+ messages in thread* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2025-02-06 18:44 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2025-02-06 18:44 UTC (permalink / raw
To: gentoo-commits
commit: be2e20899c222b91adfd6c9f4636b44e908a15e6
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Thu Feb 6 17:50:53 2025 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Thu Feb 6 17:51:18 2025 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=be2e2089
net-misc/curl: fix IUSE and RDEPEND for libressl
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/curl-8.10.1-r2.ebuild | 4 ++--
net-misc/curl/curl-8.11.1-r2.ebuild | 4 ++--
net-misc/curl/curl-8.12.0.ebuild | 4 ++--
net-misc/curl/curl-8.9.1-r2.ebuild | 4 ++--
4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/net-misc/curl/curl-8.10.1-r2.ebuild b/net-misc/curl/curl-8.10.1-r2.ebuild
index 65a1729..65fa2b6 100644
--- a/net-misc/curl/curl-8.10.1-r2.ebuild
+++ b/net-misc/curl/curl-8.10.1-r2.ebuild
@@ -29,7 +29,7 @@ SLOT="0"
IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
# These select the default tls implementation / which quic impl to use
-IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
+IUSE+=" curl_quic_openssl +curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
RESTRICT="!test? ( test )"
# Only one default ssl / quic provider can be enabled
@@ -90,7 +90,7 @@ RDEPEND="
psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
quic? (
curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[-gnutls,ssl,openssl,${MULTILIB_USEDEP}] )
)
rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
diff --git a/net-misc/curl/curl-8.11.1-r2.ebuild b/net-misc/curl/curl-8.11.1-r2.ebuild
index 48f8599..9c19c5d 100644
--- a/net-misc/curl/curl-8.11.1-r2.ebuild
+++ b/net-misc/curl/curl-8.11.1-r2.ebuild
@@ -29,7 +29,7 @@ SLOT="0"
IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
# These select the default tls implementation / which quic impl to use
-IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
+IUSE+=" curl_quic_openssl +curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
RESTRICT="!test? ( test )"
# Only one default ssl / quic provider can be enabled
@@ -90,7 +90,7 @@ RDEPEND="
psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
quic? (
curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[-gnutls,ssl,openssl,${MULTILIB_USEDEP}] )
)
rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
diff --git a/net-misc/curl/curl-8.12.0.ebuild b/net-misc/curl/curl-8.12.0.ebuild
index 7a30204..f8f62b3 100644
--- a/net-misc/curl/curl-8.12.0.ebuild
+++ b/net-misc/curl/curl-8.12.0.ebuild
@@ -29,7 +29,7 @@ SLOT="0"
IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
# These select the default tls implementation / which quic impl to use
-IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
+IUSE+=" curl_quic_openssl +curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
RESTRICT="!test? ( test )"
# Only one default ssl / quic provider can be enabled
@@ -90,7 +90,7 @@ RDEPEND="
psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
quic? (
curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[-gnutls,ssl,openssl,${MULTILIB_USEDEP}] )
)
rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
diff --git a/net-misc/curl/curl-8.9.1-r2.ebuild b/net-misc/curl/curl-8.9.1-r2.ebuild
index 3fe19dc..57eca53 100644
--- a/net-misc/curl/curl-8.9.1-r2.ebuild
+++ b/net-misc/curl/curl-8.9.1-r2.ebuild
@@ -29,7 +29,7 @@ SLOT="0"
IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp websockets zstd"
# These select the default tls implementation / which quic impl to use
-IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
+IUSE+=" curl_quic_openssl +curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
RESTRICT="!test? ( test )"
# Only one default ssl / quic provider can be enabled
@@ -90,7 +90,7 @@ RDEPEND="
psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
quic? (
curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[-gnutls,ssl,openssl,${MULTILIB_USEDEP}] )
)
rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
^ permalink raw reply related [flat|nested] 10+ messages in thread* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2025-02-05 15:02 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2025-02-05 15:02 UTC (permalink / raw
To: gentoo-commits
commit: c34be45a01ff33681c62c3997e84910591cdc95e
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Wed Feb 5 15:00:21 2025 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Wed Feb 5 15:00:21 2025 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=c34be45a
net-misc/curl: drop 8.11.0-r1
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/Manifest | 2 -
net-misc/curl/curl-8.11.0-r1.ebuild | 386 ------------------------------------
net-misc/curl/metadata.xml | 1 -
3 files changed, 389 deletions(-)
diff --git a/net-misc/curl/Manifest b/net-misc/curl/Manifest
index 04a1dbc..24f5ecb 100644
--- a/net-misc/curl/Manifest
+++ b/net-misc/curl/Manifest
@@ -1,7 +1,5 @@
DIST curl-8.10.1.tar.xz 2726748 BLAKE2B bfdfa24f6d652884044c5e8eea5d70daad651b46255c99c9df502f9595a2dcbf8c4034446becf9e87f8e8a3f397a8fda29ab3e0d6020ac0dae62dd42b8136b78 SHA512 f1c7a12492dcfb8ba08be69b96a83ce9074592cbaa6b95c72b3c16fc58ad35e9f9deec7b72baca7d360d013b0b1c7ea38bd4edae464903ac67aa3c76238d8c6c
DIST curl-8.10.1.tar.xz.asc 488 BLAKE2B 8e8f2b628d4e8964a76c1c43c5557aacbfc2d2dbc51be8a0fa1b157c257f15f29aedba842cba7cb270c4adcf0b4a5d9c8b0b3d49633c48b061fb3e1472303d66 SHA512 21d6d560c027efc9e3e5db182a77501d6376442221ba910df817e2ec980bee44a9fe2afc698205f8d5e8313ae47915a341d60206a46b46e816d73ee357a894ac
-DIST curl-8.11.0.tar.xz 2750684 BLAKE2B 3db13ed558bee332e07e1eab878b5ecae14cd049c115eea3a25fcb78cf28aadfe577dc224df75b62844529994ec478a9a74fed5c9bae338f809d231420ae5d0a SHA512 3a642d421e0a5c09ecb681bea18498f2c6124e9af4d8afdc074dfb85a9b0211d8972ade9cf00ab44b5dfed9303262cd83551dd3b5e0976d11fc19da3c4a0987e
-DIST curl-8.11.0.tar.xz.asc 488 BLAKE2B 5d91dc654d6a62c66e344ca92676b42e7a49f437e14f9fb714f7ae64a266d24d9bb7006b4512fc323459072ff0d9e05f627e494f34f845eadbedbd83acacc2ce SHA512 71073dde48e8f0013e392eb88bf70f6b8a4a4f0c955a3fb56db98e74aa10acc1004e2a0483f30be082e61b59a76fa75ae1d90545ace7c6b07bca8164078375f0
DIST curl-8.11.1.tar.xz 2751236 BLAKE2B a87ec2c78c5d6daf44eee4cf8e3ed124849d067f6c63145205fda18f33ddd3adce386058ead8f9b713f8e595f5e059acd13479eb00edc226247aabd3c2234112 SHA512 7c7c47a49505575b610c56b455f0919ea5082a993bf5483eeb258ead167aadb87078d626b343b417dcfc5439c53556425c8fb4fe3b01b53a87b47c01686a3e57
DIST curl-8.11.1.tar.xz.asc 488 BLAKE2B 53d58ebb8ab722d8394b7ce94b646c876324cd89b3e47d9129bddcfbb6db338c1dbe93a5e72a25caf7be9ddd450c2b0832cfee17beb8ba701bdeefe653235d53 SHA512 c09bedb67e83fb8ca3ad73c5bd0d92fed7fc2c26dbe5a71cccb193fd151c7219713241a9fe74baefcd1d008cfafba78142bf04cec24dd4a88d67179184d35824
DIST curl-8.12.0.tar.xz 2777552 BLAKE2B b38c7465a38f6bbdc6daa1e8a27dc810f970c9172ddf532881e83965e1fa6001beff1bf358e5138e1a0ae1121d877f6a5a4f38ef7ea7e03c8b06dc46fbf24022 SHA512 ed35f0020541050ce387f4ba80f9e87562ececd99082da1bae85840dee81c49b86a4a55909e15fcbf4eb116106a796c29a9b2678dee11326f80db75992c6edc5
diff --git a/net-misc/curl/curl-8.11.0-r1.ebuild b/net-misc/curl/curl-8.11.0-r1.ebuild
deleted file mode 100644
index ce9b05e..0000000
--- a/net-misc/curl/curl-8.11.0-r1.ebuild
+++ /dev/null
@@ -1,386 +0,0 @@
-# Copyright 1999-2025 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# Maintainers should subscribe to the 'curl-distros' ML for backports etc
-# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
-# https://lists.haxx.se/listinfo/curl-distros
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
-inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
-
-DESCRIPTION="A Client that groks URLs"
-HOMEPAGE="https://curl.se/"
-
-if [[ ${PV} == 9999 ]]; then
- inherit git-r3
- EGIT_REPO_URI="https://github.com/curl/curl.git"
-else
- SRC_URI="
- https://curl.se/download/${P}.tar.xz
- verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
- "
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-fi
-
-LICENSE="BSD curl ISC test? ( BSD-4 )"
-SLOT="0"
-IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
-IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
-# These select the default tls implementation / which quic impl to use
-IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
-RESTRICT="!test? ( test )"
-
-# Only one default ssl / quic provider can be enabled
-# The default provider needs its USE satisfied
-# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
-# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
-REQUIRED_USE="
- quic? (
- !curl_quic_openssl
- curl_quic_ngtcp2
- http3
- ssl
- )
- ssl? (
- ^^ (
- curl_ssl_gnutls
- curl_ssl_mbedtls
- curl_ssl_openssl
- curl_ssl_rustls
- )
- )
- curl_quic_openssl? (
- curl_ssl_openssl
- quic
- !gnutls
- !mbedtls
- !rustls
- )
- curl_quic_ngtcp2? (
- quic
- !mbedtls
- !rustls
- )
- curl_ssl_gnutls? ( gnutls )
- curl_ssl_mbedtls? ( mbedtls )
- curl_ssl_openssl? ( openssl )
- curl_ssl_rustls? ( rustls )
- http3? ( alt-svc quic )
-"
-
-# cURL's docs and CI/CD are great resources for confirming supported versions
-# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
-# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
-# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
-# - https://github.com/curl/curl/blob/master/.github/workflows/http3-linux.yml (CI/CD for TCP/2)
-# However 'supported' vs 'works' are two entirely different things; be sane but
-# don't be afraid to require a later version.
-# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
-RDEPEND="
- >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
- adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
- brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
- http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
- http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
- idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
- ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
- quic? (
- curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
- )
- rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
- ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
- ssl? (
- gnutls? (
- app-misc/ca-certificates
- >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
- dev-libs/nettle:=[${MULTILIB_USEDEP}]
- )
- mbedtls? (
- app-misc/ca-certificates
- net-libs/mbedtls:0=[${MULTILIB_USEDEP}]
- )
- openssl? (
- >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
- )
- rustls? (
- >=net-libs/rustls-ffi-0.14.0:=[${MULTILIB_USEDEP}]
- )
- )
- zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
-"
-
-DEPEND="${RDEPEND}"
-
-BDEPEND="
- dev-lang/perl
- virtual/pkgconfig
- test? (
- sys-apps/diffutils
- http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
- http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
- )
- verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
-"
-
-DOCS=( README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
-
-MULTILIB_WRAPPED_HEADERS=(
- /usr/include/curl/curlbuild.h
-)
-
-MULTILIB_CHOST_TOOLS=(
- /usr/bin/curl-config
-)
-
-QA_CONFIG_IMPL_DECL_SKIP=(
- __builtin_available
- closesocket
- CloseSocket
- getpass_r
- ioctlsocket
- IoctlSocket
- mach_absolute_time
- setmode
- _fseeki64
- # custom AC_LINK_IFELSE code fails to link even without -Werror
- OSSL_QUIC_client_method
-)
-
-PATCHES=(
- "${FILESDIR}/${PN}-prefix-3.patch"
- "${FILESDIR}/${PN}-respect-cflags-3.patch"
- "${FILESDIR}/${P}-cmdline-ech-docs.patch"
- "${FILESDIR}/${P}-curl-libssh-ipv6-brackets.patch"
- "${FILESDIR}/${P}-mbedtls-global-init.patch"
- "${FILESDIR}/${P}-setopt-http_content_decoding.patch"
- "${FILESDIR}/${P}-cookie-case-sensitive.patch"
- "${FILESDIR}/${P}-duphandle-init-netrc.patch"
- "${FILESDIR}/${P}-netrc-large-file.patch"
-)
-
-src_prepare() {
- default
-
- eprefixify curl-config.in
- eautoreconf
-}
-
-multilib_src_configure() {
- # We make use of the fact that later flags override earlier ones
- # So start with all ssl providers off until proven otherwise
- # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
- local myconf=()
-
- myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
- if use ssl; then
- myconf+=( --without-gnutls --without-mbedtls --without-rustls )
-
- if use gnutls; then
- multilib_is_native_abi && einfo "SSL provided by gnutls"
- myconf+=( --with-gnutls )
- fi
- if use mbedtls; then
- multilib_is_native_abi && einfo "SSL provided by mbedtls"
- myconf+=( --with-mbedtls )
- fi
- if use openssl; then
- multilib_is_native_abi && einfo "SSL provided by openssl"
- myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
- fi
- if use rustls; then
- multilib_is_native_abi && einfo "SSL provided by rustls"
- myconf+=( --with-rustls )
- fi
- if use curl_ssl_gnutls; then
- multilib_is_native_abi && einfo "Default SSL provided by gnutls"
- myconf+=( --with-default-ssl-backend=gnutls )
- elif use curl_ssl_mbedtls; then
- multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
- myconf+=( --with-default-ssl-backend=mbedtls )
- elif use curl_ssl_openssl; then
- multilib_is_native_abi && einfo "Default SSL provided by openssl"
- myconf+=( --with-default-ssl-backend=openssl )
- elif use curl_ssl_rustls; then
- multilib_is_native_abi && einfo "Default SSL provided by rustls"
- myconf+=( --with-default-ssl-backend=rustls )
- else
- eerror "We can't be here because of REQUIRED_USE."
- die "Please file a bug, hit impossible condition w/ USE=ssl handling."
- fi
-
- else
- myconf+=( --without-ssl )
- einfo "SSL disabled"
- fi
-
- # These configuration options are organized alphabetically
- # within each category. This should make it easier if we
- # ever decide to make any of them contingent on USE flags:
- # 1) protocols first. To see them all do
- # 'grep SUPPORT_PROTOCOLS configure.ac'
- # 2) --enable/disable options second.
- # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
- # 3) --with/without options third.
- # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
-
- myconf+=(
- $(use_enable alt-svc)
- --enable-basic-auth
- --enable-bearer-auth
- --enable-digest-auth
- --enable-kerberos-auth
- --enable-negotiate-auth
- --enable-aws
- --enable-dict
- --disable-ech
- --enable-file
- $(use_enable ftp)
- $(use_enable gopher)
- $(use_enable hsts)
- --enable-http
- $(use_enable imap)
- $(use_enable ldap)
- $(use_enable ldap ldaps)
- --enable-ntlm
- $(use_enable pop3)
- --enable-rt
- --enable-rtsp
- $(use_enable samba smb)
- $(use_with ssh libssh2)
- $(use_enable smtp)
- $(use_enable telnet)
- $(use_enable tftp)
- --enable-tls-srp
- $(use_enable adns ares)
- --enable-cookies
- --enable-dateparse
- --enable-dnsshuffle
- --enable-doh
- --enable-symbol-hiding
- --enable-http-auth
- --enable-ipv6
- --enable-largefile
- --enable-manual
- --enable-mime
- --enable-netrc
- $(use_enable progress-meter)
- --enable-proxy
- --enable-socketpair
- --disable-sspi
- $(use_enable static-libs static)
- --enable-pthreads
- --enable-threaded-resolver
- --disable-versioned-symbols
- --without-amissl
- --without-bearssl
- $(use_with brotli)
- --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
- $(use_with http2 nghttp2)
- --without-hyper
- $(use_with idn libidn2)
- $(use_with kerberos gssapi "${EPREFIX}"/usr)
- --without-libgsasl
- $(use_with psl libpsl)
- --without-msh3
- $(use_with http3 nghttp3)
- $(use_with curl_quic_ngtcp2 ngtcp2)
- $(use_with curl_quic_openssl openssl-quic)
- --without-quiche
- $(use_with rtmp librtmp)
- --without-schannel
- --without-secure-transport
- --without-test-caddy
- --without-test-httpd
- --without-test-nghttpx
- $(use_enable websockets)
- --without-winidn
- --without-wolfssl
- --with-zlib
- $(use_with zstd)
- --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
- )
-
- if use debug; then
- myconf+=(
- --enable-debug
- )
- fi
-
- if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
- myconf+=(
- --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
- )
- fi
-
- if [[ ${CHOST} == *mingw* ]] ; then
- myconf+=(
- --disable-pthreads
- )
- fi
-
- ECONF_SOURCE="${S}" econf "${myconf[@]}"
-
- if ! multilib_is_native_abi; then
- # Avoid building the client (we just want libcurl for multilib)
- sed -i -e '/SUBDIRS/s:src::' Makefile || die
- sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
- fi
-
-}
-
-multilib_src_compile() {
- default
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts
- fi
-}
-
-# There is also a pytest harness that tests for bugs in some very specific
-# situations; we can rely on upstream for this rather than adding additional test deps.
-multilib_src_test() {
- # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
- # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
- # -v: verbose
- # -a: keep going on failure (so we see everything that breaks, not just 1st test)
- # -k: keep test files after completion
- # -am: automake style TAP output
- # -p: print logs if test fails
- # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
- # or just read https://github.com/curl/curl/tree/master/tests#run.
- # Note: we don't run the testsuite for cross-compilation.
- # Upstream recommend 7*nproc as a starting point for parallel tests, but
- # this ends up breaking when nproc is huge (like -j80).
- # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
- # as most gentoo users don't have an 'ip6-localhost'
- multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
-}
-
-multilib_src_install() {
- emake DESTDIR="${D}" install
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
- fi
-}
-
-multilib_src_install_all() {
- einstalldocs
- find "${ED}" -type f -name '*.la' -delete || die
- rm -rf "${ED}"/etc/ || die
-}
-
-pkg_postinst() {
- if use debug; then
- ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
- ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
- ewarn "hic sunt dracones; you have been warned."
- fi
-}
diff --git a/net-misc/curl/metadata.xml b/net-misc/curl/metadata.xml
index 884608c..b3581ad 100644
--- a/net-misc/curl/metadata.xml
+++ b/net-misc/curl/metadata.xml
@@ -17,7 +17,6 @@
<flag name="hsts">Enable HTTP Strict Transport Security</flag>
<flag name="imap">Enable Internet Message Access Protocol support</flag>
<flag name="mbedtls">Enable mbedtls ssl backend</flag>
- <flag name="nghttp3">Enable HTTP/3 support using <pkg>net-libs/nghttp3</pkg></flag>
<flag name="http3">Enable HTTP/3 support</flag>
<flag name="openssl">Enable openssl ssl backend</flag>
<flag name="pop3">Enable Post Office Protocol 3 support</flag>
^ permalink raw reply related [flat|nested] 10+ messages in thread* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2025-02-05 15:02 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2025-02-05 15:02 UTC (permalink / raw
To: gentoo-commits
commit: ae92428ecfd4e4817a670a5499e64cbcb1621721
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Wed Feb 5 14:59:46 2025 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Wed Feb 5 14:59:46 2025 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=ae92428e
net-misc/curl: stabilize 8.11.1-r2
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/curl-8.11.1-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net-misc/curl/curl-8.11.1-r2.ebuild b/net-misc/curl/curl-8.11.1-r2.ebuild
index d9af3e3..48f8599 100644
--- a/net-misc/curl/curl-8.11.1-r2.ebuild
+++ b/net-misc/curl/curl-8.11.1-r2.ebuild
@@ -21,7 +21,7 @@ else
https://curl.se/download/${P}.tar.xz
verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
"
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+ KEYWORDS="~alpha amd64 arm arm64 ~hppa ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
fi
LICENSE="BSD curl ISC test? ( BSD-4 )"
^ permalink raw reply related [flat|nested] 10+ messages in thread* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2025-01-08 14:36 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2025-01-08 14:36 UTC (permalink / raw
To: gentoo-commits
commit: 3bdcfdf1c84bfa3e2e5ac94f04b544eb6ad3b831
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Wed Jan 8 14:29:58 2025 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Wed Jan 8 14:29:58 2025 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=3bdcfdf1
net-misc/curl: drop 8.9.1-r1, 8.10.1-r1, 8.11.0, 8.11.1-r1
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/curl-8.10.1-r1.ebuild | 379 -----------------------------------
net-misc/curl/curl-8.11.0.ebuild | 386 ------------------------------------
net-misc/curl/curl-8.11.1-r1.ebuild | 380 -----------------------------------
net-misc/curl/curl-8.9.1-r1.ebuild | 380 -----------------------------------
4 files changed, 1525 deletions(-)
diff --git a/net-misc/curl/curl-8.10.1-r1.ebuild b/net-misc/curl/curl-8.10.1-r1.ebuild
deleted file mode 100644
index c86b1a5..0000000
--- a/net-misc/curl/curl-8.10.1-r1.ebuild
+++ /dev/null
@@ -1,379 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# Maintainers should subscribe to the 'curl-distros' ML for backports etc
-# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
-# https://lists.haxx.se/listinfo/curl-distros
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
-inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
-
-DESCRIPTION="A Client that groks URLs"
-HOMEPAGE="https://curl.se/"
-
-if [[ ${PV} == 9999 ]]; then
- inherit git-r3
- EGIT_REPO_URI="https://github.com/curl/curl.git"
-else
- SRC_URI="
- https://curl.se/download/${P}.tar.xz
- verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
- "
- KEYWORDS="~alpha amd64 arm arm64 ~hppa ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-fi
-
-LICENSE="BSD curl ISC test? ( BSD-4 )"
-SLOT="0"
-IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
-IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
-# These select the default tls implementation / which quic impl to use
-IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
-RESTRICT="!test? ( test )"
-
-# Only one default ssl / quic provider can be enabled
-# The default provider needs its USE satisfied
-# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
-# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
-REQUIRED_USE="
- quic? (
- !curl_quic_openssl
- curl_quic_ngtcp2
- http3
- ssl
- )
- ssl? (
- ^^ (
- curl_ssl_gnutls
- curl_ssl_mbedtls
- curl_ssl_openssl
- curl_ssl_rustls
- )
- )
- curl_quic_openssl? (
- curl_ssl_openssl
- quic
- !gnutls
- !mbedtls
- !rustls
- )
- curl_quic_ngtcp2? (
- quic
- !mbedtls
- !rustls
- )
- curl_ssl_gnutls? ( gnutls )
- curl_ssl_mbedtls? ( mbedtls )
- curl_ssl_openssl? ( openssl )
- curl_ssl_rustls? ( rustls )
- http3? ( alt-svc quic )
-"
-
-# cURL's docs and CI/CD are great resources for confirming supported versions
-# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
-# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
-# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
-# - https://github.com/curl/curl/blob/master/.github/workflows/http3-linux.yml (CI/CD for TCP/2)
-# However 'supported' vs 'works' are two entirely different things; be sane but
-# don't be afraid to require a later version.
-# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
-RDEPEND="
- >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
- adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
- brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
- http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
- http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
- idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
- ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
- quic? (
- curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
- )
- rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
- ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
- ssl? (
- gnutls? (
- app-misc/ca-certificates
- >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
- dev-libs/nettle:=[${MULTILIB_USEDEP}]
- )
- mbedtls? (
- app-misc/ca-certificates
- net-libs/mbedtls:=[${MULTILIB_USEDEP}]
- )
- openssl? (
- >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
- )
- rustls? (
- >=net-libs/rustls-ffi-0.14.0:=[${MULTILIB_USEDEP}]
- )
- )
- zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
-"
-
-DEPEND="${RDEPEND}"
-
-BDEPEND="
- dev-lang/perl
- virtual/pkgconfig
- test? (
- sys-apps/diffutils
- http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
- http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
- )
- verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
-"
-
-DOCS=( README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
-
-MULTILIB_WRAPPED_HEADERS=(
- /usr/include/curl/curlbuild.h
-)
-
-MULTILIB_CHOST_TOOLS=(
- /usr/bin/curl-config
-)
-
-QA_CONFIG_IMPL_DECL_SKIP=(
- __builtin_available
- closesocket
- CloseSocket
- getpass_r
- ioctlsocket
- IoctlSocket
- mach_absolute_time
- setmode
- _fseeki64
- # custom AC_LINK_IFELSE code fails to link even without -Werror
- OSSL_QUIC_client_method
-)
-
-PATCHES=(
- "${FILESDIR}"/${PN}-prefix-2.patch
- "${FILESDIR}"/${PN}-respect-cflags-3.patch
-)
-
-src_prepare() {
- default
-
- eprefixify curl-config.in
- eautoreconf
-}
-
-multilib_src_configure() {
- # We make use of the fact that later flags override earlier ones
- # So start with all ssl providers off until proven otherwise
- # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
- local myconf=()
-
- myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
- if use ssl; then
- myconf+=( --without-gnutls --without-mbedtls --without-rustls )
-
- if use gnutls; then
- multilib_is_native_abi && einfo "SSL provided by gnutls"
- myconf+=( --with-gnutls )
- fi
- if use mbedtls; then
- multilib_is_native_abi && einfo "SSL provided by mbedtls"
- myconf+=( --with-mbedtls )
- fi
- if use openssl; then
- multilib_is_native_abi && einfo "SSL provided by openssl"
- myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
- fi
- if use rustls; then
- multilib_is_native_abi && einfo "SSL provided by rustls"
- myconf+=( --with-rustls )
- fi
- if use curl_ssl_gnutls; then
- multilib_is_native_abi && einfo "Default SSL provided by gnutls"
- myconf+=( --with-default-ssl-backend=gnutls )
- elif use curl_ssl_mbedtls; then
- multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
- myconf+=( --with-default-ssl-backend=mbedtls )
- elif use curl_ssl_openssl; then
- multilib_is_native_abi && einfo "Default SSL provided by openssl"
- myconf+=( --with-default-ssl-backend=openssl )
- elif use curl_ssl_rustls; then
- multilib_is_native_abi && einfo "Default SSL provided by rustls"
- myconf+=( --with-default-ssl-backend=rustls )
- else
- eerror "We can't be here because of REQUIRED_USE."
- die "Please file a bug, hit impossible condition w/ USE=ssl handling."
- fi
-
- else
- myconf+=( --without-ssl )
- einfo "SSL disabled"
- fi
-
- # These configuration options are organized alphabetically
- # within each category. This should make it easier if we
- # ever decide to make any of them contingent on USE flags:
- # 1) protocols first. To see them all do
- # 'grep SUPPORT_PROTOCOLS configure.ac'
- # 2) --enable/disable options second.
- # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
- # 3) --with/without options third.
- # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
-
- myconf+=(
- $(use_enable alt-svc)
- --enable-basic-auth
- --enable-bearer-auth
- --enable-digest-auth
- --enable-kerberos-auth
- --enable-negotiate-auth
- --enable-aws
- --enable-dict
- --disable-ech
- --enable-file
- $(use_enable ftp)
- $(use_enable gopher)
- $(use_enable hsts)
- --enable-http
- $(use_enable imap)
- $(use_enable ldap)
- $(use_enable ldap ldaps)
- --enable-ntlm
- $(use_enable pop3)
- --enable-rt
- --enable-rtsp
- $(use_enable samba smb)
- $(use_with ssh libssh2)
- $(use_enable smtp)
- $(use_enable telnet)
- $(use_enable tftp)
- --enable-tls-srp
- $(use_enable adns ares)
- --enable-cookies
- --enable-dateparse
- --enable-dnsshuffle
- --enable-doh
- --enable-symbol-hiding
- --enable-http-auth
- --enable-ipv6
- --enable-largefile
- --enable-manual
- --enable-mime
- --enable-netrc
- $(use_enable progress-meter)
- --enable-proxy
- --enable-socketpair
- --disable-sspi
- $(use_enable static-libs static)
- --enable-pthreads
- --enable-threaded-resolver
- --disable-versioned-symbols
- --without-amissl
- --without-bearssl
- $(use_with brotli)
- --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
- $(use_with http2 nghttp2)
- --without-hyper
- $(use_with idn libidn2)
- $(use_with kerberos gssapi "${EPREFIX}"/usr)
- --without-libgsasl
- $(use_with psl libpsl)
- --without-msh3
- $(use_with http3 nghttp3)
- $(use_with curl_quic_ngtcp2 ngtcp2)
- $(use_with curl_quic_openssl openssl-quic)
- --without-quiche
- $(use_with rtmp librtmp)
- --without-schannel
- --without-secure-transport
- --without-test-caddy
- --without-test-httpd
- --without-test-nghttpx
- $(use_enable websockets)
- --without-winidn
- --without-wolfssl
- --with-zlib
- $(use_with zstd)
- --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
- )
-
- if use debug; then
- myconf+=(
- --enable-debug
- )
- fi
-
- if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
- myconf+=(
- --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
- )
- fi
-
- if [[ ${CHOST} == *mingw* ]] ; then
- myconf+=(
- --disable-pthreads
- )
- fi
-
- ECONF_SOURCE="${S}" econf "${myconf[@]}"
-
- if ! multilib_is_native_abi; then
- # Avoid building the client (we just want libcurl for multilib)
- sed -i -e '/SUBDIRS/s:src::' Makefile || die
- sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
- fi
-
-}
-
-multilib_src_compile() {
- default
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts
- fi
-}
-
-# There is also a pytest harness that tests for bugs in some very specific
-# situations; we can rely on upstream for this rather than adding additional test deps.
-multilib_src_test() {
- # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
- # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
- # -v: verbose
- # -a: keep going on failure (so we see everything that breaks, not just 1st test)
- # -k: keep test files after completion
- # -am: automake style TAP output
- # -p: print logs if test fails
- # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
- # or just read https://github.com/curl/curl/tree/master/tests#run.
- # Note: we don't run the testsuite for cross-compilation.
- # Upstream recommend 7*nproc as a starting point for parallel tests, but
- # this ends up breaking when nproc is huge (like -j80).
- # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
- # as most gentoo users don't have an 'ip6-localhost'
- multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
-}
-
-multilib_src_install() {
- emake DESTDIR="${D}" install
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
- fi
-}
-
-multilib_src_install_all() {
- einstalldocs
- find "${ED}" -type f -name '*.la' -delete || die
- rm -rf "${ED}"/etc/ || die
-}
-
-pkg_postinst() {
- if use debug; then
- ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
- ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
- ewarn "hic sunt dracones; you have been warned."
- fi
-}
diff --git a/net-misc/curl/curl-8.11.0.ebuild b/net-misc/curl/curl-8.11.0.ebuild
deleted file mode 100644
index 87825d6..0000000
--- a/net-misc/curl/curl-8.11.0.ebuild
+++ /dev/null
@@ -1,386 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# Maintainers should subscribe to the 'curl-distros' ML for backports etc
-# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
-# https://lists.haxx.se/listinfo/curl-distros
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
-inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
-
-DESCRIPTION="A Client that groks URLs"
-HOMEPAGE="https://curl.se/"
-
-if [[ ${PV} == 9999 ]]; then
- inherit git-r3
- EGIT_REPO_URI="https://github.com/curl/curl.git"
-else
- SRC_URI="
- https://curl.se/download/${P}.tar.xz
- verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
- "
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-fi
-
-LICENSE="BSD curl ISC test? ( BSD-4 )"
-SLOT="0"
-IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
-IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
-# These select the default tls implementation / which quic impl to use
-IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
-RESTRICT="!test? ( test )"
-
-# Only one default ssl / quic provider can be enabled
-# The default provider needs its USE satisfied
-# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
-# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
-REQUIRED_USE="
- quic? (
- !curl_quic_openssl
- curl_quic_ngtcp2
- http3
- ssl
- )
- ssl? (
- ^^ (
- curl_ssl_gnutls
- curl_ssl_mbedtls
- curl_ssl_openssl
- curl_ssl_rustls
- )
- )
- curl_quic_openssl? (
- curl_ssl_openssl
- quic
- !gnutls
- !mbedtls
- !rustls
- )
- curl_quic_ngtcp2? (
- quic
- !mbedtls
- !rustls
- )
- curl_ssl_gnutls? ( gnutls )
- curl_ssl_mbedtls? ( mbedtls )
- curl_ssl_openssl? ( openssl )
- curl_ssl_rustls? ( rustls )
- http3? ( alt-svc quic )
-"
-
-# cURL's docs and CI/CD are great resources for confirming supported versions
-# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
-# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
-# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
-# - https://github.com/curl/curl/blob/master/.github/workflows/http3-linux.yml (CI/CD for TCP/2)
-# However 'supported' vs 'works' are two entirely different things; be sane but
-# don't be afraid to require a later version.
-# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
-RDEPEND="
- >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
- adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
- brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
- http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
- http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
- idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
- ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
- quic? (
- curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
- )
- rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
- ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
- ssl? (
- gnutls? (
- app-misc/ca-certificates
- >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
- dev-libs/nettle:=[${MULTILIB_USEDEP}]
- )
- mbedtls? (
- app-misc/ca-certificates
- net-libs/mbedtls:=[${MULTILIB_USEDEP}]
- )
- openssl? (
- >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
- )
- rustls? (
- >=net-libs/rustls-ffi-0.14.0:=[${MULTILIB_USEDEP}]
- )
- )
- zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
-"
-
-DEPEND="${RDEPEND}"
-
-BDEPEND="
- dev-lang/perl
- virtual/pkgconfig
- test? (
- sys-apps/diffutils
- http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
- http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
- )
- verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
-"
-
-DOCS=( README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
-
-MULTILIB_WRAPPED_HEADERS=(
- /usr/include/curl/curlbuild.h
-)
-
-MULTILIB_CHOST_TOOLS=(
- /usr/bin/curl-config
-)
-
-QA_CONFIG_IMPL_DECL_SKIP=(
- __builtin_available
- closesocket
- CloseSocket
- getpass_r
- ioctlsocket
- IoctlSocket
- mach_absolute_time
- setmode
- _fseeki64
- # custom AC_LINK_IFELSE code fails to link even without -Werror
- OSSL_QUIC_client_method
-)
-
-PATCHES=(
- "${FILESDIR}/${PN}-prefix-3.patch"
- "${FILESDIR}/${PN}-respect-cflags-3.patch"
- "${FILESDIR}/${P}-cmdline-ech-docs.patch"
- "${FILESDIR}/${P}-curl-libssh-ipv6-brackets.patch"
- "${FILESDIR}/${P}-mbedtls-global-init.patch"
- "${FILESDIR}/${P}-setopt-http_content_decoding.patch"
- "${FILESDIR}/${P}-cookie-case-sensitive.patch"
- "${FILESDIR}/${P}-duphandle-init-netrc.patch"
- "${FILESDIR}/${P}-netrc-large-file.patch"
-)
-
-src_prepare() {
- default
-
- eprefixify curl-config.in
- eautoreconf
-}
-
-multilib_src_configure() {
- # We make use of the fact that later flags override earlier ones
- # So start with all ssl providers off until proven otherwise
- # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
- local myconf=()
-
- myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
- if use ssl; then
- myconf+=( --without-gnutls --without-mbedtls --without-rustls )
-
- if use gnutls; then
- multilib_is_native_abi && einfo "SSL provided by gnutls"
- myconf+=( --with-gnutls )
- fi
- if use mbedtls; then
- multilib_is_native_abi && einfo "SSL provided by mbedtls"
- myconf+=( --with-mbedtls )
- fi
- if use openssl; then
- multilib_is_native_abi && einfo "SSL provided by openssl"
- myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
- fi
- if use rustls; then
- multilib_is_native_abi && einfo "SSL provided by rustls"
- myconf+=( --with-rustls )
- fi
- if use curl_ssl_gnutls; then
- multilib_is_native_abi && einfo "Default SSL provided by gnutls"
- myconf+=( --with-default-ssl-backend=gnutls )
- elif use curl_ssl_mbedtls; then
- multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
- myconf+=( --with-default-ssl-backend=mbedtls )
- elif use curl_ssl_openssl; then
- multilib_is_native_abi && einfo "Default SSL provided by openssl"
- myconf+=( --with-default-ssl-backend=openssl )
- elif use curl_ssl_rustls; then
- multilib_is_native_abi && einfo "Default SSL provided by rustls"
- myconf+=( --with-default-ssl-backend=rustls )
- else
- eerror "We can't be here because of REQUIRED_USE."
- die "Please file a bug, hit impossible condition w/ USE=ssl handling."
- fi
-
- else
- myconf+=( --without-ssl )
- einfo "SSL disabled"
- fi
-
- # These configuration options are organized alphabetically
- # within each category. This should make it easier if we
- # ever decide to make any of them contingent on USE flags:
- # 1) protocols first. To see them all do
- # 'grep SUPPORT_PROTOCOLS configure.ac'
- # 2) --enable/disable options second.
- # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
- # 3) --with/without options third.
- # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
-
- myconf+=(
- $(use_enable alt-svc)
- --enable-basic-auth
- --enable-bearer-auth
- --enable-digest-auth
- --enable-kerberos-auth
- --enable-negotiate-auth
- --enable-aws
- --enable-dict
- --disable-ech
- --enable-file
- $(use_enable ftp)
- $(use_enable gopher)
- $(use_enable hsts)
- --enable-http
- $(use_enable imap)
- $(use_enable ldap)
- $(use_enable ldap ldaps)
- --enable-ntlm
- $(use_enable pop3)
- --enable-rt
- --enable-rtsp
- $(use_enable samba smb)
- $(use_with ssh libssh2)
- $(use_enable smtp)
- $(use_enable telnet)
- $(use_enable tftp)
- --enable-tls-srp
- $(use_enable adns ares)
- --enable-cookies
- --enable-dateparse
- --enable-dnsshuffle
- --enable-doh
- --enable-symbol-hiding
- --enable-http-auth
- --enable-ipv6
- --enable-largefile
- --enable-manual
- --enable-mime
- --enable-netrc
- $(use_enable progress-meter)
- --enable-proxy
- --enable-socketpair
- --disable-sspi
- $(use_enable static-libs static)
- --enable-pthreads
- --enable-threaded-resolver
- --disable-versioned-symbols
- --without-amissl
- --without-bearssl
- $(use_with brotli)
- --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
- $(use_with http2 nghttp2)
- --without-hyper
- $(use_with idn libidn2)
- $(use_with kerberos gssapi "${EPREFIX}"/usr)
- --without-libgsasl
- $(use_with psl libpsl)
- --without-msh3
- $(use_with http3 nghttp3)
- $(use_with curl_quic_ngtcp2 ngtcp2)
- $(use_with curl_quic_openssl openssl-quic)
- --without-quiche
- $(use_with rtmp librtmp)
- --without-schannel
- --without-secure-transport
- --without-test-caddy
- --without-test-httpd
- --without-test-nghttpx
- $(use_enable websockets)
- --without-winidn
- --without-wolfssl
- --with-zlib
- $(use_with zstd)
- --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
- )
-
- if use debug; then
- myconf+=(
- --enable-debug
- )
- fi
-
- if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
- myconf+=(
- --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
- )
- fi
-
- if [[ ${CHOST} == *mingw* ]] ; then
- myconf+=(
- --disable-pthreads
- )
- fi
-
- ECONF_SOURCE="${S}" econf "${myconf[@]}"
-
- if ! multilib_is_native_abi; then
- # Avoid building the client (we just want libcurl for multilib)
- sed -i -e '/SUBDIRS/s:src::' Makefile || die
- sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
- fi
-
-}
-
-multilib_src_compile() {
- default
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts
- fi
-}
-
-# There is also a pytest harness that tests for bugs in some very specific
-# situations; we can rely on upstream for this rather than adding additional test deps.
-multilib_src_test() {
- # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
- # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
- # -v: verbose
- # -a: keep going on failure (so we see everything that breaks, not just 1st test)
- # -k: keep test files after completion
- # -am: automake style TAP output
- # -p: print logs if test fails
- # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
- # or just read https://github.com/curl/curl/tree/master/tests#run.
- # Note: we don't run the testsuite for cross-compilation.
- # Upstream recommend 7*nproc as a starting point for parallel tests, but
- # this ends up breaking when nproc is huge (like -j80).
- # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
- # as most gentoo users don't have an 'ip6-localhost'
- multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
-}
-
-multilib_src_install() {
- emake DESTDIR="${D}" install
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
- fi
-}
-
-multilib_src_install_all() {
- einstalldocs
- find "${ED}" -type f -name '*.la' -delete || die
- rm -rf "${ED}"/etc/ || die
-}
-
-pkg_postinst() {
- if use debug; then
- ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
- ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
- ewarn "hic sunt dracones; you have been warned."
- fi
-}
diff --git a/net-misc/curl/curl-8.11.1-r1.ebuild b/net-misc/curl/curl-8.11.1-r1.ebuild
deleted file mode 100644
index aca6d0d..0000000
--- a/net-misc/curl/curl-8.11.1-r1.ebuild
+++ /dev/null
@@ -1,380 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# Maintainers should subscribe to the 'curl-distros' ML for backports etc
-# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
-# https://lists.haxx.se/listinfo/curl-distros
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
-inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
-
-DESCRIPTION="A Client that groks URLs"
-HOMEPAGE="https://curl.se/"
-
-if [[ ${PV} == 9999 ]]; then
- inherit git-r3
- EGIT_REPO_URI="https://github.com/curl/curl.git"
-else
- SRC_URI="
- https://curl.se/download/${P}.tar.xz
- verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
- "
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-fi
-
-LICENSE="BSD curl ISC test? ( BSD-4 )"
-SLOT="0"
-IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
-IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
-# These select the default tls implementation / which quic impl to use
-IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
-RESTRICT="!test? ( test )"
-
-# Only one default ssl / quic provider can be enabled
-# The default provider needs its USE satisfied
-# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
-# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
-REQUIRED_USE="
- quic? (
- !curl_quic_openssl
- curl_quic_ngtcp2
- http3
- ssl
- )
- ssl? (
- ^^ (
- curl_ssl_gnutls
- curl_ssl_mbedtls
- curl_ssl_openssl
- curl_ssl_rustls
- )
- )
- curl_quic_openssl? (
- curl_ssl_openssl
- quic
- !gnutls
- !mbedtls
- !rustls
- )
- curl_quic_ngtcp2? (
- quic
- !mbedtls
- !rustls
- )
- curl_ssl_gnutls? ( gnutls )
- curl_ssl_mbedtls? ( mbedtls )
- curl_ssl_openssl? ( openssl )
- curl_ssl_rustls? ( rustls )
- http3? ( alt-svc quic )
-"
-
-# cURL's docs and CI/CD are great resources for confirming supported versions
-# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
-# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
-# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
-# - https://github.com/curl/curl/blob/master/.github/workflows/http3-linux.yml (CI/CD for TCP/2)
-# However 'supported' vs 'works' are two entirely different things; be sane but
-# don't be afraid to require a later version.
-# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
-RDEPEND="
- >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
- adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
- brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
- http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
- http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
- idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
- ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
- quic? (
- curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
- )
- rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
- ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
- ssl? (
- gnutls? (
- app-misc/ca-certificates
- >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
- dev-libs/nettle:=[${MULTILIB_USEDEP}]
- )
- mbedtls? (
- app-misc/ca-certificates
- net-libs/mbedtls:=[${MULTILIB_USEDEP}]
- )
- openssl? (
- >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
- )
- rustls? (
- >=net-libs/rustls-ffi-0.14.0:=[${MULTILIB_USEDEP}]
- )
- )
- zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
-"
-
-DEPEND="${RDEPEND}"
-
-BDEPEND="
- dev-lang/perl
- virtual/pkgconfig
- test? (
- sys-apps/diffutils
- http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
- http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
- )
- verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
-"
-
-DOCS=( README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
-
-MULTILIB_WRAPPED_HEADERS=(
- /usr/include/curl/curlbuild.h
-)
-
-MULTILIB_CHOST_TOOLS=(
- /usr/bin/curl-config
-)
-
-QA_CONFIG_IMPL_DECL_SKIP=(
- __builtin_available
- closesocket
- CloseSocket
- getpass_r
- ioctlsocket
- IoctlSocket
- mach_absolute_time
- setmode
- _fseeki64
- # custom AC_LINK_IFELSE code fails to link even without -Werror
- OSSL_QUIC_client_method
-)
-
-PATCHES=(
- "${FILESDIR}/${PN}-prefix-3.patch"
- "${FILESDIR}/${PN}-respect-cflags-3.patch"
- "${FILESDIR}/${P}-async-thread-close-eventfd.patch"
-)
-
-src_prepare() {
- default
-
- eprefixify curl-config.in
- eautoreconf
-}
-
-multilib_src_configure() {
- # We make use of the fact that later flags override earlier ones
- # So start with all ssl providers off until proven otherwise
- # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
- local myconf=()
-
- myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
- if use ssl; then
- myconf+=( --without-gnutls --without-mbedtls --without-rustls )
-
- if use gnutls; then
- multilib_is_native_abi && einfo "SSL provided by gnutls"
- myconf+=( --with-gnutls )
- fi
- if use mbedtls; then
- multilib_is_native_abi && einfo "SSL provided by mbedtls"
- myconf+=( --with-mbedtls )
- fi
- if use openssl; then
- multilib_is_native_abi && einfo "SSL provided by openssl"
- myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
- fi
- if use rustls; then
- multilib_is_native_abi && einfo "SSL provided by rustls"
- myconf+=( --with-rustls )
- fi
- if use curl_ssl_gnutls; then
- multilib_is_native_abi && einfo "Default SSL provided by gnutls"
- myconf+=( --with-default-ssl-backend=gnutls )
- elif use curl_ssl_mbedtls; then
- multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
- myconf+=( --with-default-ssl-backend=mbedtls )
- elif use curl_ssl_openssl; then
- multilib_is_native_abi && einfo "Default SSL provided by openssl"
- myconf+=( --with-default-ssl-backend=openssl )
- elif use curl_ssl_rustls; then
- multilib_is_native_abi && einfo "Default SSL provided by rustls"
- myconf+=( --with-default-ssl-backend=rustls )
- else
- eerror "We can't be here because of REQUIRED_USE."
- die "Please file a bug, hit impossible condition w/ USE=ssl handling."
- fi
-
- else
- myconf+=( --without-ssl )
- einfo "SSL disabled"
- fi
-
- # These configuration options are organized alphabetically
- # within each category. This should make it easier if we
- # ever decide to make any of them contingent on USE flags:
- # 1) protocols first. To see them all do
- # 'grep SUPPORT_PROTOCOLS configure.ac'
- # 2) --enable/disable options second.
- # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
- # 3) --with/without options third.
- # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
-
- myconf+=(
- $(use_enable alt-svc)
- --enable-basic-auth
- --enable-bearer-auth
- --enable-digest-auth
- --enable-kerberos-auth
- --enable-negotiate-auth
- --enable-aws
- --enable-dict
- --disable-ech
- --enable-file
- $(use_enable ftp)
- $(use_enable gopher)
- $(use_enable hsts)
- --enable-http
- $(use_enable imap)
- $(use_enable ldap)
- $(use_enable ldap ldaps)
- --enable-ntlm
- $(use_enable pop3)
- --enable-rt
- --enable-rtsp
- $(use_enable samba smb)
- $(use_with ssh libssh2)
- $(use_enable smtp)
- $(use_enable telnet)
- $(use_enable tftp)
- --enable-tls-srp
- $(use_enable adns ares)
- --enable-cookies
- --enable-dateparse
- --enable-dnsshuffle
- --enable-doh
- --enable-symbol-hiding
- --enable-http-auth
- --enable-ipv6
- --enable-largefile
- --enable-manual
- --enable-mime
- --enable-netrc
- $(use_enable progress-meter)
- --enable-proxy
- --enable-socketpair
- --disable-sspi
- $(use_enable static-libs static)
- --enable-pthreads
- --enable-threaded-resolver
- --disable-versioned-symbols
- --without-amissl
- --without-bearssl
- $(use_with brotli)
- --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
- $(use_with http2 nghttp2)
- --without-hyper
- $(use_with idn libidn2)
- $(use_with kerberos gssapi "${EPREFIX}"/usr)
- --without-libgsasl
- $(use_with psl libpsl)
- --without-msh3
- $(use_with http3 nghttp3)
- $(use_with curl_quic_ngtcp2 ngtcp2)
- $(use_with curl_quic_openssl openssl-quic)
- --without-quiche
- $(use_with rtmp librtmp)
- --without-schannel
- --without-secure-transport
- --without-test-caddy
- --without-test-httpd
- --without-test-nghttpx
- $(use_enable websockets)
- --without-winidn
- --without-wolfssl
- --with-zlib
- $(use_with zstd)
- --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
- )
-
- if use debug; then
- myconf+=(
- --enable-debug
- )
- fi
-
- if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
- myconf+=(
- --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
- )
- fi
-
- if [[ ${CHOST} == *mingw* ]] ; then
- myconf+=(
- --disable-pthreads
- )
- fi
-
- ECONF_SOURCE="${S}" econf "${myconf[@]}"
-
- if ! multilib_is_native_abi; then
- # Avoid building the client (we just want libcurl for multilib)
- sed -i -e '/SUBDIRS/s:src::' Makefile || die
- sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
- fi
-
-}
-
-multilib_src_compile() {
- default
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts
- fi
-}
-
-# There is also a pytest harness that tests for bugs in some very specific
-# situations; we can rely on upstream for this rather than adding additional test deps.
-multilib_src_test() {
- # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
- # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
- # -v: verbose
- # -a: keep going on failure (so we see everything that breaks, not just 1st test)
- # -k: keep test files after completion
- # -am: automake style TAP output
- # -p: print logs if test fails
- # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
- # or just read https://github.com/curl/curl/tree/master/tests#run.
- # Note: we don't run the testsuite for cross-compilation.
- # Upstream recommend 7*nproc as a starting point for parallel tests, but
- # this ends up breaking when nproc is huge (like -j80).
- # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
- # as most gentoo users don't have an 'ip6-localhost'
- multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
-}
-
-multilib_src_install() {
- emake DESTDIR="${D}" install
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
- fi
-}
-
-multilib_src_install_all() {
- einstalldocs
- find "${ED}" -type f -name '*.la' -delete || die
- rm -rf "${ED}"/etc/ || die
-}
-
-pkg_postinst() {
- if use debug; then
- ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
- ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
- ewarn "hic sunt dracones; you have been warned."
- fi
-}
diff --git a/net-misc/curl/curl-8.9.1-r1.ebuild b/net-misc/curl/curl-8.9.1-r1.ebuild
deleted file mode 100644
index 242d131..0000000
--- a/net-misc/curl/curl-8.9.1-r1.ebuild
+++ /dev/null
@@ -1,380 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# Maintainers should subscribe to the 'curl-distros' ML for backports etc
-# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
-# https://lists.haxx.se/listinfo/curl-distros
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
-inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
-
-DESCRIPTION="A Client that groks URLs"
-HOMEPAGE="https://curl.se/"
-
-if [[ ${PV} == 9999 ]]; then
- inherit git-r3
- EGIT_REPO_URI="https://github.com/curl/curl.git"
-else
- SRC_URI="
- https://curl.se/download/${P}.tar.xz
- verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
- "
- KEYWORDS="~alpha amd64 arm arm64 hppa ~loong ~m68k ~mips ~ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-fi
-
-LICENSE="BSD curl ISC test? ( BSD-4 )"
-SLOT="0"
-IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
-IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp websockets zstd"
-# These select the default tls implementation / which quic impl to use
-IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
-RESTRICT="!test? ( test )"
-
-# Only one default ssl / quic provider can be enabled
-# The default provider needs its USE satisfied
-# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
-# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
-REQUIRED_USE="
- quic? (
- !curl_quic_openssl
- curl_quic_ngtcp2
- http3
- ssl
- )
- ssl? (
- ^^ (
- curl_ssl_gnutls
- curl_ssl_mbedtls
- curl_ssl_openssl
- curl_ssl_rustls
- )
- )
- curl_quic_openssl? (
- curl_ssl_openssl
- quic
- !gnutls
- !mbedtls
- !rustls
- )
- curl_quic_ngtcp2? (
- quic
- !mbedtls
- !rustls
- )
- curl_ssl_gnutls? ( gnutls )
- curl_ssl_mbedtls? ( mbedtls )
- curl_ssl_openssl? ( openssl )
- curl_ssl_rustls? ( rustls )
- http3? ( alt-svc quic )
-"
-
-# cURL's docs and CI/CD are great resources for confirming supported versions
-# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
-# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
-# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
-# - https://github.com/curl/curl/blob/master/.github/workflows/quiche-linux.yml (CI/CD for TCP/2)
-# However 'supported' vs 'works' are two entirely different things; be sane but
-# don't be afraid to require a later version.
-# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
-RDEPEND="
- >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
- adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
- brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
- http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
- http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
- idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
- ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
- psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
- quic? (
- curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
- curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
- )
- rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
- ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
- ssl? (
- gnutls? (
- app-misc/ca-certificates
- >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
- dev-libs/nettle:=[${MULTILIB_USEDEP}]
- )
- mbedtls? (
- app-misc/ca-certificates
- net-libs/mbedtls:=[${MULTILIB_USEDEP}]
- )
- openssl? (
- >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
- )
- rustls? (
- >=net-libs/rustls-ffi-0.13.0:=[${MULTILIB_USEDEP}]
- )
- )
- zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
-"
-
-DEPEND="${RDEPEND}"
-
-BDEPEND="
- dev-lang/perl
- virtual/pkgconfig
- test? (
- sys-apps/diffutils
- http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
- http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
- )
- verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
-"
-
-DOCS=( CHANGES README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
-
-MULTILIB_WRAPPED_HEADERS=(
- /usr/include/curl/curlbuild.h
-)
-
-MULTILIB_CHOST_TOOLS=(
- /usr/bin/curl-config
-)
-
-QA_CONFIG_IMPL_DECL_SKIP=(
- __builtin_available
- closesocket
- CloseSocket
- getpass_r
- ioctlsocket
- IoctlSocket
- mach_absolute_time
- setmode
- _fseeki64
- # custom AC_LINK_IFELSE code fails to link even without -Werror
- OSSL_QUIC_client_method
-)
-
-PATCHES=(
- "${FILESDIR}"/${PN}-prefix-2.patch
- "${FILESDIR}"/${PN}-respect-cflags-3.patch
- "${FILESDIR}"/${PN}-8.9.1-sigpipe.patch
-)
-
-src_prepare() {
- default
-
- eprefixify curl-config.in
- eautoreconf
-}
-
-multilib_src_configure() {
- # We make use of the fact that later flags override earlier ones
- # So start with all ssl providers off until proven otherwise
- # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
- local myconf=()
-
- myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
- if use ssl; then
- myconf+=( --without-gnutls --without-mbedtls --without-rustls )
-
- if use gnutls; then
- multilib_is_native_abi && einfo "SSL provided by gnutls"
- myconf+=( --with-gnutls )
- fi
- if use mbedtls; then
- multilib_is_native_abi && einfo "SSL provided by mbedtls"
- myconf+=( --with-mbedtls )
- fi
- if use openssl; then
- multilib_is_native_abi && einfo "SSL provided by openssl"
- myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
- fi
- if use rustls; then
- multilib_is_native_abi && einfo "SSL provided by rustls"
- myconf+=( --with-rustls )
- fi
- if use curl_ssl_gnutls; then
- multilib_is_native_abi && einfo "Default SSL provided by gnutls"
- myconf+=( --with-default-ssl-backend=gnutls )
- elif use curl_ssl_mbedtls; then
- multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
- myconf+=( --with-default-ssl-backend=mbedtls )
- elif use curl_ssl_openssl; then
- multilib_is_native_abi && einfo "Default SSL provided by openssl"
- myconf+=( --with-default-ssl-backend=openssl )
- elif use curl_ssl_rustls; then
- multilib_is_native_abi && einfo "Default SSL provided by rustls"
- myconf+=( --with-default-ssl-backend=rustls )
- else
- eerror "We can't be here because of REQUIRED_USE."
- die "Please file a bug, hit impossible condition w/ USE=ssl handling."
- fi
-
- else
- myconf+=( --without-ssl )
- einfo "SSL disabled"
- fi
-
- # These configuration options are organized alphabetically
- # within each category. This should make it easier if we
- # ever decide to make any of them contingent on USE flags:
- # 1) protocols first. To see them all do
- # 'grep SUPPORT_PROTOCOLS configure.ac'
- # 2) --enable/disable options second.
- # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
- # 3) --with/without options third.
- # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
-
- myconf+=(
- $(use_enable alt-svc)
- --enable-basic-auth
- --enable-bearer-auth
- --enable-digest-auth
- --enable-kerberos-auth
- --enable-negotiate-auth
- --enable-aws
- --enable-dict
- --disable-ech
- --enable-file
- $(use_enable ftp)
- $(use_enable gopher)
- $(use_enable hsts)
- --enable-http
- $(use_enable imap)
- $(use_enable ldap)
- $(use_enable ldap ldaps)
- --enable-ntlm
- $(use_enable pop3)
- --enable-rt
- --enable-rtsp
- $(use_enable samba smb)
- $(use_with ssh libssh2)
- $(use_enable smtp)
- $(use_enable telnet)
- $(use_enable tftp)
- --enable-tls-srp
- $(use_enable adns ares)
- --enable-cookies
- --enable-dateparse
- --enable-dnsshuffle
- --enable-doh
- --enable-symbol-hiding
- --enable-http-auth
- --enable-ipv6
- --enable-largefile
- --enable-manual
- --enable-mime
- --enable-netrc
- $(use_enable progress-meter)
- --enable-proxy
- --enable-socketpair
- --disable-sspi
- $(use_enable static-libs static)
- --enable-pthreads
- --enable-threaded-resolver
- --disable-versioned-symbols
- --without-amissl
- --without-bearssl
- $(use_with brotli)
- --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
- $(use_with http2 nghttp2)
- --without-hyper
- $(use_with idn libidn2)
- $(use_with kerberos gssapi "${EPREFIX}"/usr)
- --without-libgsasl
- $(use_with psl libpsl)
- --without-msh3
- $(use_with http3 nghttp3)
- $(use_with curl_quic_ngtcp2 ngtcp2)
- $(use_with curl_quic_openssl openssl-quic)
- --without-quiche
- $(use_with rtmp librtmp)
- --without-schannel
- --without-secure-transport
- --without-test-caddy
- --without-test-httpd
- --without-test-nghttpx
- $(use_enable websockets)
- --without-winidn
- --without-wolfssl
- --with-zlib
- $(use_with zstd)
- --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
- )
-
- if use debug; then
- myconf+=(
- --enable-debug
- )
- fi
-
- if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
- myconf+=(
- --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
- )
- fi
-
- if [[ ${CHOST} == *mingw* ]] ; then
- myconf+=(
- --disable-pthreads
- )
- fi
-
- ECONF_SOURCE="${S}" econf "${myconf[@]}"
-
- if ! multilib_is_native_abi; then
- # Avoid building the client (we just want libcurl for multilib)
- sed -i -e '/SUBDIRS/s:src::' Makefile || die
- sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
- fi
-
-}
-
-multilib_src_compile() {
- default
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts
- fi
-}
-
-# There is also a pytest harness that tests for bugs in some very specific
-# situations; we can rely on upstream for this rather than adding additional test deps.
-multilib_src_test() {
- # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
- # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
- # -v: verbose
- # -a: keep going on failure (so we see everything which breaks, not just 1st test)
- # -k: keep test files after completion
- # -am: automake style TAP output
- # -p: print logs if test fails
- # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
- # or just read https://github.com/curl/curl/tree/master/tests#run.
- # Note: we don't run the testsuite for cross-compilation.
- # Upstream recommend 7*nproc as a starting point for parallel tests, but
- # this ends up breaking when nproc is huge (like -j80).
- # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
- # as most gentoo users don't have an 'ip6-localhost'
- multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
-}
-
-multilib_src_install() {
- emake DESTDIR="${D}" install
-
- if multilib_is_native_abi; then
- # Shell completions
- ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
- fi
-}
-
-multilib_src_install_all() {
- einstalldocs
- find "${ED}" -type f -name '*.la' -delete || die
- rm -rf "${ED}"/etc/ || die
-}
-
-pkg_postinst() {
- if use debug; then
- ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
- ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
- ewarn "hic sunt dracones; you have been warned."
- fi
-}
^ permalink raw reply related [flat|nested] 10+ messages in thread* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2025-01-08 14:36 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2025-01-08 14:36 UTC (permalink / raw
To: gentoo-commits
commit: 40523ea5094bf0d4893e2a24dcd1b63988e29841
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Wed Jan 8 14:28:56 2025 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Wed Jan 8 14:28:56 2025 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=40523ea5
net-misc/curl: new versions
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/curl-8.10.1-r2.ebuild | 379 +++++++++++++++++++++++++++++++++++
net-misc/curl/curl-8.11.0-r1.ebuild | 386 ++++++++++++++++++++++++++++++++++++
net-misc/curl/curl-8.11.1-r2.ebuild | 380 +++++++++++++++++++++++++++++++++++
net-misc/curl/curl-8.9.1-r2.ebuild | 380 +++++++++++++++++++++++++++++++++++
4 files changed, 1525 insertions(+)
diff --git a/net-misc/curl/curl-8.10.1-r2.ebuild b/net-misc/curl/curl-8.10.1-r2.ebuild
new file mode 100644
index 0000000..65a1729
--- /dev/null
+++ b/net-misc/curl/curl-8.10.1-r2.ebuild
@@ -0,0 +1,379 @@
+# Copyright 1999-2025 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+# Maintainers should subscribe to the 'curl-distros' ML for backports etc
+# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
+# https://lists.haxx.se/listinfo/curl-distros
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
+inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
+
+DESCRIPTION="A Client that groks URLs"
+HOMEPAGE="https://curl.se/"
+
+if [[ ${PV} == 9999 ]]; then
+ inherit git-r3
+ EGIT_REPO_URI="https://github.com/curl/curl.git"
+else
+ SRC_URI="
+ https://curl.se/download/${P}.tar.xz
+ verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
+ "
+ KEYWORDS="~alpha amd64 arm arm64 ~hppa ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+fi
+
+LICENSE="BSD curl ISC test? ( BSD-4 )"
+SLOT="0"
+IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
+IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
+# These select the default tls implementation / which quic impl to use
+IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
+RESTRICT="!test? ( test )"
+
+# Only one default ssl / quic provider can be enabled
+# The default provider needs its USE satisfied
+# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
+# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
+REQUIRED_USE="
+ quic? (
+ !curl_quic_openssl
+ curl_quic_ngtcp2
+ http3
+ ssl
+ )
+ ssl? (
+ ^^ (
+ curl_ssl_gnutls
+ curl_ssl_mbedtls
+ curl_ssl_openssl
+ curl_ssl_rustls
+ )
+ )
+ curl_quic_openssl? (
+ curl_ssl_openssl
+ quic
+ !gnutls
+ !mbedtls
+ !rustls
+ )
+ curl_quic_ngtcp2? (
+ quic
+ !mbedtls
+ !rustls
+ )
+ curl_ssl_gnutls? ( gnutls )
+ curl_ssl_mbedtls? ( mbedtls )
+ curl_ssl_openssl? ( openssl )
+ curl_ssl_rustls? ( rustls )
+ http3? ( alt-svc quic )
+"
+
+# cURL's docs and CI/CD are great resources for confirming supported versions
+# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
+# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
+# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
+# - https://github.com/curl/curl/blob/master/.github/workflows/http3-linux.yml (CI/CD for TCP/2)
+# However 'supported' vs 'works' are two entirely different things; be sane but
+# don't be afraid to require a later version.
+# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
+RDEPEND="
+ >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
+ adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
+ brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
+ http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
+ http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
+ idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
+ ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
+ quic? (
+ curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
+ )
+ rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
+ ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
+ ssl? (
+ gnutls? (
+ app-misc/ca-certificates
+ >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
+ dev-libs/nettle:=[${MULTILIB_USEDEP}]
+ )
+ mbedtls? (
+ app-misc/ca-certificates
+ net-libs/mbedtls:0=[${MULTILIB_USEDEP}]
+ )
+ openssl? (
+ >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
+ )
+ rustls? (
+ >=net-libs/rustls-ffi-0.14.0:=[${MULTILIB_USEDEP}]
+ )
+ )
+ zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
+"
+
+DEPEND="${RDEPEND}"
+
+BDEPEND="
+ dev-lang/perl
+ virtual/pkgconfig
+ test? (
+ sys-apps/diffutils
+ http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
+ http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
+ )
+ verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
+"
+
+DOCS=( README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
+
+MULTILIB_WRAPPED_HEADERS=(
+ /usr/include/curl/curlbuild.h
+)
+
+MULTILIB_CHOST_TOOLS=(
+ /usr/bin/curl-config
+)
+
+QA_CONFIG_IMPL_DECL_SKIP=(
+ __builtin_available
+ closesocket
+ CloseSocket
+ getpass_r
+ ioctlsocket
+ IoctlSocket
+ mach_absolute_time
+ setmode
+ _fseeki64
+ # custom AC_LINK_IFELSE code fails to link even without -Werror
+ OSSL_QUIC_client_method
+)
+
+PATCHES=(
+ "${FILESDIR}"/${PN}-prefix-2.patch
+ "${FILESDIR}"/${PN}-respect-cflags-3.patch
+)
+
+src_prepare() {
+ default
+
+ eprefixify curl-config.in
+ eautoreconf
+}
+
+multilib_src_configure() {
+ # We make use of the fact that later flags override earlier ones
+ # So start with all ssl providers off until proven otherwise
+ # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
+ local myconf=()
+
+ myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
+ if use ssl; then
+ myconf+=( --without-gnutls --without-mbedtls --without-rustls )
+
+ if use gnutls; then
+ multilib_is_native_abi && einfo "SSL provided by gnutls"
+ myconf+=( --with-gnutls )
+ fi
+ if use mbedtls; then
+ multilib_is_native_abi && einfo "SSL provided by mbedtls"
+ myconf+=( --with-mbedtls )
+ fi
+ if use openssl; then
+ multilib_is_native_abi && einfo "SSL provided by openssl"
+ myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
+ fi
+ if use rustls; then
+ multilib_is_native_abi && einfo "SSL provided by rustls"
+ myconf+=( --with-rustls )
+ fi
+ if use curl_ssl_gnutls; then
+ multilib_is_native_abi && einfo "Default SSL provided by gnutls"
+ myconf+=( --with-default-ssl-backend=gnutls )
+ elif use curl_ssl_mbedtls; then
+ multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
+ myconf+=( --with-default-ssl-backend=mbedtls )
+ elif use curl_ssl_openssl; then
+ multilib_is_native_abi && einfo "Default SSL provided by openssl"
+ myconf+=( --with-default-ssl-backend=openssl )
+ elif use curl_ssl_rustls; then
+ multilib_is_native_abi && einfo "Default SSL provided by rustls"
+ myconf+=( --with-default-ssl-backend=rustls )
+ else
+ eerror "We can't be here because of REQUIRED_USE."
+ die "Please file a bug, hit impossible condition w/ USE=ssl handling."
+ fi
+
+ else
+ myconf+=( --without-ssl )
+ einfo "SSL disabled"
+ fi
+
+ # These configuration options are organized alphabetically
+ # within each category. This should make it easier if we
+ # ever decide to make any of them contingent on USE flags:
+ # 1) protocols first. To see them all do
+ # 'grep SUPPORT_PROTOCOLS configure.ac'
+ # 2) --enable/disable options second.
+ # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
+ # 3) --with/without options third.
+ # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
+
+ myconf+=(
+ $(use_enable alt-svc)
+ --enable-basic-auth
+ --enable-bearer-auth
+ --enable-digest-auth
+ --enable-kerberos-auth
+ --enable-negotiate-auth
+ --enable-aws
+ --enable-dict
+ --disable-ech
+ --enable-file
+ $(use_enable ftp)
+ $(use_enable gopher)
+ $(use_enable hsts)
+ --enable-http
+ $(use_enable imap)
+ $(use_enable ldap)
+ $(use_enable ldap ldaps)
+ --enable-ntlm
+ $(use_enable pop3)
+ --enable-rt
+ --enable-rtsp
+ $(use_enable samba smb)
+ $(use_with ssh libssh2)
+ $(use_enable smtp)
+ $(use_enable telnet)
+ $(use_enable tftp)
+ --enable-tls-srp
+ $(use_enable adns ares)
+ --enable-cookies
+ --enable-dateparse
+ --enable-dnsshuffle
+ --enable-doh
+ --enable-symbol-hiding
+ --enable-http-auth
+ --enable-ipv6
+ --enable-largefile
+ --enable-manual
+ --enable-mime
+ --enable-netrc
+ $(use_enable progress-meter)
+ --enable-proxy
+ --enable-socketpair
+ --disable-sspi
+ $(use_enable static-libs static)
+ --enable-pthreads
+ --enable-threaded-resolver
+ --disable-versioned-symbols
+ --without-amissl
+ --without-bearssl
+ $(use_with brotli)
+ --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
+ $(use_with http2 nghttp2)
+ --without-hyper
+ $(use_with idn libidn2)
+ $(use_with kerberos gssapi "${EPREFIX}"/usr)
+ --without-libgsasl
+ $(use_with psl libpsl)
+ --without-msh3
+ $(use_with http3 nghttp3)
+ $(use_with curl_quic_ngtcp2 ngtcp2)
+ $(use_with curl_quic_openssl openssl-quic)
+ --without-quiche
+ $(use_with rtmp librtmp)
+ --without-schannel
+ --without-secure-transport
+ --without-test-caddy
+ --without-test-httpd
+ --without-test-nghttpx
+ $(use_enable websockets)
+ --without-winidn
+ --without-wolfssl
+ --with-zlib
+ $(use_with zstd)
+ --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
+ )
+
+ if use debug; then
+ myconf+=(
+ --enable-debug
+ )
+ fi
+
+ if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
+ myconf+=(
+ --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
+ )
+ fi
+
+ if [[ ${CHOST} == *mingw* ]] ; then
+ myconf+=(
+ --disable-pthreads
+ )
+ fi
+
+ ECONF_SOURCE="${S}" econf "${myconf[@]}"
+
+ if ! multilib_is_native_abi; then
+ # Avoid building the client (we just want libcurl for multilib)
+ sed -i -e '/SUBDIRS/s:src::' Makefile || die
+ sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
+ fi
+
+}
+
+multilib_src_compile() {
+ default
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts
+ fi
+}
+
+# There is also a pytest harness that tests for bugs in some very specific
+# situations; we can rely on upstream for this rather than adding additional test deps.
+multilib_src_test() {
+ # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
+ # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
+ # -v: verbose
+ # -a: keep going on failure (so we see everything that breaks, not just 1st test)
+ # -k: keep test files after completion
+ # -am: automake style TAP output
+ # -p: print logs if test fails
+ # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
+ # or just read https://github.com/curl/curl/tree/master/tests#run.
+ # Note: we don't run the testsuite for cross-compilation.
+ # Upstream recommend 7*nproc as a starting point for parallel tests, but
+ # this ends up breaking when nproc is huge (like -j80).
+ # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
+ # as most gentoo users don't have an 'ip6-localhost'
+ multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
+}
+
+multilib_src_install() {
+ emake DESTDIR="${D}" install
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
+ fi
+}
+
+multilib_src_install_all() {
+ einstalldocs
+ find "${ED}" -type f -name '*.la' -delete || die
+ rm -rf "${ED}"/etc/ || die
+}
+
+pkg_postinst() {
+ if use debug; then
+ ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
+ ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
+ ewarn "hic sunt dracones; you have been warned."
+ fi
+}
diff --git a/net-misc/curl/curl-8.11.0-r1.ebuild b/net-misc/curl/curl-8.11.0-r1.ebuild
new file mode 100644
index 0000000..ce9b05e
--- /dev/null
+++ b/net-misc/curl/curl-8.11.0-r1.ebuild
@@ -0,0 +1,386 @@
+# Copyright 1999-2025 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+# Maintainers should subscribe to the 'curl-distros' ML for backports etc
+# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
+# https://lists.haxx.se/listinfo/curl-distros
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
+inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
+
+DESCRIPTION="A Client that groks URLs"
+HOMEPAGE="https://curl.se/"
+
+if [[ ${PV} == 9999 ]]; then
+ inherit git-r3
+ EGIT_REPO_URI="https://github.com/curl/curl.git"
+else
+ SRC_URI="
+ https://curl.se/download/${P}.tar.xz
+ verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
+ "
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+fi
+
+LICENSE="BSD curl ISC test? ( BSD-4 )"
+SLOT="0"
+IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
+IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
+# These select the default tls implementation / which quic impl to use
+IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
+RESTRICT="!test? ( test )"
+
+# Only one default ssl / quic provider can be enabled
+# The default provider needs its USE satisfied
+# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
+# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
+REQUIRED_USE="
+ quic? (
+ !curl_quic_openssl
+ curl_quic_ngtcp2
+ http3
+ ssl
+ )
+ ssl? (
+ ^^ (
+ curl_ssl_gnutls
+ curl_ssl_mbedtls
+ curl_ssl_openssl
+ curl_ssl_rustls
+ )
+ )
+ curl_quic_openssl? (
+ curl_ssl_openssl
+ quic
+ !gnutls
+ !mbedtls
+ !rustls
+ )
+ curl_quic_ngtcp2? (
+ quic
+ !mbedtls
+ !rustls
+ )
+ curl_ssl_gnutls? ( gnutls )
+ curl_ssl_mbedtls? ( mbedtls )
+ curl_ssl_openssl? ( openssl )
+ curl_ssl_rustls? ( rustls )
+ http3? ( alt-svc quic )
+"
+
+# cURL's docs and CI/CD are great resources for confirming supported versions
+# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
+# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
+# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
+# - https://github.com/curl/curl/blob/master/.github/workflows/http3-linux.yml (CI/CD for TCP/2)
+# However 'supported' vs 'works' are two entirely different things; be sane but
+# don't be afraid to require a later version.
+# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
+RDEPEND="
+ >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
+ adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
+ brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
+ http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
+ http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
+ idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
+ ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
+ quic? (
+ curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
+ )
+ rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
+ ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
+ ssl? (
+ gnutls? (
+ app-misc/ca-certificates
+ >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
+ dev-libs/nettle:=[${MULTILIB_USEDEP}]
+ )
+ mbedtls? (
+ app-misc/ca-certificates
+ net-libs/mbedtls:0=[${MULTILIB_USEDEP}]
+ )
+ openssl? (
+ >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
+ )
+ rustls? (
+ >=net-libs/rustls-ffi-0.14.0:=[${MULTILIB_USEDEP}]
+ )
+ )
+ zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
+"
+
+DEPEND="${RDEPEND}"
+
+BDEPEND="
+ dev-lang/perl
+ virtual/pkgconfig
+ test? (
+ sys-apps/diffutils
+ http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
+ http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
+ )
+ verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
+"
+
+DOCS=( README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
+
+MULTILIB_WRAPPED_HEADERS=(
+ /usr/include/curl/curlbuild.h
+)
+
+MULTILIB_CHOST_TOOLS=(
+ /usr/bin/curl-config
+)
+
+QA_CONFIG_IMPL_DECL_SKIP=(
+ __builtin_available
+ closesocket
+ CloseSocket
+ getpass_r
+ ioctlsocket
+ IoctlSocket
+ mach_absolute_time
+ setmode
+ _fseeki64
+ # custom AC_LINK_IFELSE code fails to link even without -Werror
+ OSSL_QUIC_client_method
+)
+
+PATCHES=(
+ "${FILESDIR}/${PN}-prefix-3.patch"
+ "${FILESDIR}/${PN}-respect-cflags-3.patch"
+ "${FILESDIR}/${P}-cmdline-ech-docs.patch"
+ "${FILESDIR}/${P}-curl-libssh-ipv6-brackets.patch"
+ "${FILESDIR}/${P}-mbedtls-global-init.patch"
+ "${FILESDIR}/${P}-setopt-http_content_decoding.patch"
+ "${FILESDIR}/${P}-cookie-case-sensitive.patch"
+ "${FILESDIR}/${P}-duphandle-init-netrc.patch"
+ "${FILESDIR}/${P}-netrc-large-file.patch"
+)
+
+src_prepare() {
+ default
+
+ eprefixify curl-config.in
+ eautoreconf
+}
+
+multilib_src_configure() {
+ # We make use of the fact that later flags override earlier ones
+ # So start with all ssl providers off until proven otherwise
+ # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
+ local myconf=()
+
+ myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
+ if use ssl; then
+ myconf+=( --without-gnutls --without-mbedtls --without-rustls )
+
+ if use gnutls; then
+ multilib_is_native_abi && einfo "SSL provided by gnutls"
+ myconf+=( --with-gnutls )
+ fi
+ if use mbedtls; then
+ multilib_is_native_abi && einfo "SSL provided by mbedtls"
+ myconf+=( --with-mbedtls )
+ fi
+ if use openssl; then
+ multilib_is_native_abi && einfo "SSL provided by openssl"
+ myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
+ fi
+ if use rustls; then
+ multilib_is_native_abi && einfo "SSL provided by rustls"
+ myconf+=( --with-rustls )
+ fi
+ if use curl_ssl_gnutls; then
+ multilib_is_native_abi && einfo "Default SSL provided by gnutls"
+ myconf+=( --with-default-ssl-backend=gnutls )
+ elif use curl_ssl_mbedtls; then
+ multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
+ myconf+=( --with-default-ssl-backend=mbedtls )
+ elif use curl_ssl_openssl; then
+ multilib_is_native_abi && einfo "Default SSL provided by openssl"
+ myconf+=( --with-default-ssl-backend=openssl )
+ elif use curl_ssl_rustls; then
+ multilib_is_native_abi && einfo "Default SSL provided by rustls"
+ myconf+=( --with-default-ssl-backend=rustls )
+ else
+ eerror "We can't be here because of REQUIRED_USE."
+ die "Please file a bug, hit impossible condition w/ USE=ssl handling."
+ fi
+
+ else
+ myconf+=( --without-ssl )
+ einfo "SSL disabled"
+ fi
+
+ # These configuration options are organized alphabetically
+ # within each category. This should make it easier if we
+ # ever decide to make any of them contingent on USE flags:
+ # 1) protocols first. To see them all do
+ # 'grep SUPPORT_PROTOCOLS configure.ac'
+ # 2) --enable/disable options second.
+ # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
+ # 3) --with/without options third.
+ # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
+
+ myconf+=(
+ $(use_enable alt-svc)
+ --enable-basic-auth
+ --enable-bearer-auth
+ --enable-digest-auth
+ --enable-kerberos-auth
+ --enable-negotiate-auth
+ --enable-aws
+ --enable-dict
+ --disable-ech
+ --enable-file
+ $(use_enable ftp)
+ $(use_enable gopher)
+ $(use_enable hsts)
+ --enable-http
+ $(use_enable imap)
+ $(use_enable ldap)
+ $(use_enable ldap ldaps)
+ --enable-ntlm
+ $(use_enable pop3)
+ --enable-rt
+ --enable-rtsp
+ $(use_enable samba smb)
+ $(use_with ssh libssh2)
+ $(use_enable smtp)
+ $(use_enable telnet)
+ $(use_enable tftp)
+ --enable-tls-srp
+ $(use_enable adns ares)
+ --enable-cookies
+ --enable-dateparse
+ --enable-dnsshuffle
+ --enable-doh
+ --enable-symbol-hiding
+ --enable-http-auth
+ --enable-ipv6
+ --enable-largefile
+ --enable-manual
+ --enable-mime
+ --enable-netrc
+ $(use_enable progress-meter)
+ --enable-proxy
+ --enable-socketpair
+ --disable-sspi
+ $(use_enable static-libs static)
+ --enable-pthreads
+ --enable-threaded-resolver
+ --disable-versioned-symbols
+ --without-amissl
+ --without-bearssl
+ $(use_with brotli)
+ --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
+ $(use_with http2 nghttp2)
+ --without-hyper
+ $(use_with idn libidn2)
+ $(use_with kerberos gssapi "${EPREFIX}"/usr)
+ --without-libgsasl
+ $(use_with psl libpsl)
+ --without-msh3
+ $(use_with http3 nghttp3)
+ $(use_with curl_quic_ngtcp2 ngtcp2)
+ $(use_with curl_quic_openssl openssl-quic)
+ --without-quiche
+ $(use_with rtmp librtmp)
+ --without-schannel
+ --without-secure-transport
+ --without-test-caddy
+ --without-test-httpd
+ --without-test-nghttpx
+ $(use_enable websockets)
+ --without-winidn
+ --without-wolfssl
+ --with-zlib
+ $(use_with zstd)
+ --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
+ )
+
+ if use debug; then
+ myconf+=(
+ --enable-debug
+ )
+ fi
+
+ if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
+ myconf+=(
+ --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
+ )
+ fi
+
+ if [[ ${CHOST} == *mingw* ]] ; then
+ myconf+=(
+ --disable-pthreads
+ )
+ fi
+
+ ECONF_SOURCE="${S}" econf "${myconf[@]}"
+
+ if ! multilib_is_native_abi; then
+ # Avoid building the client (we just want libcurl for multilib)
+ sed -i -e '/SUBDIRS/s:src::' Makefile || die
+ sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
+ fi
+
+}
+
+multilib_src_compile() {
+ default
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts
+ fi
+}
+
+# There is also a pytest harness that tests for bugs in some very specific
+# situations; we can rely on upstream for this rather than adding additional test deps.
+multilib_src_test() {
+ # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
+ # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
+ # -v: verbose
+ # -a: keep going on failure (so we see everything that breaks, not just 1st test)
+ # -k: keep test files after completion
+ # -am: automake style TAP output
+ # -p: print logs if test fails
+ # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
+ # or just read https://github.com/curl/curl/tree/master/tests#run.
+ # Note: we don't run the testsuite for cross-compilation.
+ # Upstream recommend 7*nproc as a starting point for parallel tests, but
+ # this ends up breaking when nproc is huge (like -j80).
+ # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
+ # as most gentoo users don't have an 'ip6-localhost'
+ multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
+}
+
+multilib_src_install() {
+ emake DESTDIR="${D}" install
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
+ fi
+}
+
+multilib_src_install_all() {
+ einstalldocs
+ find "${ED}" -type f -name '*.la' -delete || die
+ rm -rf "${ED}"/etc/ || die
+}
+
+pkg_postinst() {
+ if use debug; then
+ ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
+ ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
+ ewarn "hic sunt dracones; you have been warned."
+ fi
+}
diff --git a/net-misc/curl/curl-8.11.1-r2.ebuild b/net-misc/curl/curl-8.11.1-r2.ebuild
new file mode 100644
index 0000000..d9af3e3
--- /dev/null
+++ b/net-misc/curl/curl-8.11.1-r2.ebuild
@@ -0,0 +1,380 @@
+# Copyright 1999-2025 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+# Maintainers should subscribe to the 'curl-distros' ML for backports etc
+# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
+# https://lists.haxx.se/listinfo/curl-distros
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
+inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
+
+DESCRIPTION="A Client that groks URLs"
+HOMEPAGE="https://curl.se/"
+
+if [[ ${PV} == 9999 ]]; then
+ inherit git-r3
+ EGIT_REPO_URI="https://github.com/curl/curl.git"
+else
+ SRC_URI="
+ https://curl.se/download/${P}.tar.xz
+ verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
+ "
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+fi
+
+LICENSE="BSD curl ISC test? ( BSD-4 )"
+SLOT="0"
+IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
+IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
+# These select the default tls implementation / which quic impl to use
+IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
+RESTRICT="!test? ( test )"
+
+# Only one default ssl / quic provider can be enabled
+# The default provider needs its USE satisfied
+# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
+# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
+REQUIRED_USE="
+ quic? (
+ !curl_quic_openssl
+ curl_quic_ngtcp2
+ http3
+ ssl
+ )
+ ssl? (
+ ^^ (
+ curl_ssl_gnutls
+ curl_ssl_mbedtls
+ curl_ssl_openssl
+ curl_ssl_rustls
+ )
+ )
+ curl_quic_openssl? (
+ curl_ssl_openssl
+ quic
+ !gnutls
+ !mbedtls
+ !rustls
+ )
+ curl_quic_ngtcp2? (
+ quic
+ !mbedtls
+ !rustls
+ )
+ curl_ssl_gnutls? ( gnutls )
+ curl_ssl_mbedtls? ( mbedtls )
+ curl_ssl_openssl? ( openssl )
+ curl_ssl_rustls? ( rustls )
+ http3? ( alt-svc quic )
+"
+
+# cURL's docs and CI/CD are great resources for confirming supported versions
+# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
+# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
+# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
+# - https://github.com/curl/curl/blob/master/.github/workflows/http3-linux.yml (CI/CD for TCP/2)
+# However 'supported' vs 'works' are two entirely different things; be sane but
+# don't be afraid to require a later version.
+# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
+RDEPEND="
+ >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
+ adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
+ brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
+ http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
+ http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
+ idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
+ ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
+ quic? (
+ curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
+ )
+ rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
+ ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
+ ssl? (
+ gnutls? (
+ app-misc/ca-certificates
+ >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
+ dev-libs/nettle:=[${MULTILIB_USEDEP}]
+ )
+ mbedtls? (
+ app-misc/ca-certificates
+ net-libs/mbedtls:0=[${MULTILIB_USEDEP}]
+ )
+ openssl? (
+ >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
+ )
+ rustls? (
+ >=net-libs/rustls-ffi-0.14.0:=[${MULTILIB_USEDEP}]
+ )
+ )
+ zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
+"
+
+DEPEND="${RDEPEND}"
+
+BDEPEND="
+ dev-lang/perl
+ virtual/pkgconfig
+ test? (
+ sys-apps/diffutils
+ http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
+ http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
+ )
+ verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
+"
+
+DOCS=( README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
+
+MULTILIB_WRAPPED_HEADERS=(
+ /usr/include/curl/curlbuild.h
+)
+
+MULTILIB_CHOST_TOOLS=(
+ /usr/bin/curl-config
+)
+
+QA_CONFIG_IMPL_DECL_SKIP=(
+ __builtin_available
+ closesocket
+ CloseSocket
+ getpass_r
+ ioctlsocket
+ IoctlSocket
+ mach_absolute_time
+ setmode
+ _fseeki64
+ # custom AC_LINK_IFELSE code fails to link even without -Werror
+ OSSL_QUIC_client_method
+)
+
+PATCHES=(
+ "${FILESDIR}/${PN}-prefix-3.patch"
+ "${FILESDIR}/${PN}-respect-cflags-3.patch"
+ "${FILESDIR}/${P}-async-thread-close-eventfd.patch"
+)
+
+src_prepare() {
+ default
+
+ eprefixify curl-config.in
+ eautoreconf
+}
+
+multilib_src_configure() {
+ # We make use of the fact that later flags override earlier ones
+ # So start with all ssl providers off until proven otherwise
+ # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
+ local myconf=()
+
+ myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
+ if use ssl; then
+ myconf+=( --without-gnutls --without-mbedtls --without-rustls )
+
+ if use gnutls; then
+ multilib_is_native_abi && einfo "SSL provided by gnutls"
+ myconf+=( --with-gnutls )
+ fi
+ if use mbedtls; then
+ multilib_is_native_abi && einfo "SSL provided by mbedtls"
+ myconf+=( --with-mbedtls )
+ fi
+ if use openssl; then
+ multilib_is_native_abi && einfo "SSL provided by openssl"
+ myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
+ fi
+ if use rustls; then
+ multilib_is_native_abi && einfo "SSL provided by rustls"
+ myconf+=( --with-rustls )
+ fi
+ if use curl_ssl_gnutls; then
+ multilib_is_native_abi && einfo "Default SSL provided by gnutls"
+ myconf+=( --with-default-ssl-backend=gnutls )
+ elif use curl_ssl_mbedtls; then
+ multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
+ myconf+=( --with-default-ssl-backend=mbedtls )
+ elif use curl_ssl_openssl; then
+ multilib_is_native_abi && einfo "Default SSL provided by openssl"
+ myconf+=( --with-default-ssl-backend=openssl )
+ elif use curl_ssl_rustls; then
+ multilib_is_native_abi && einfo "Default SSL provided by rustls"
+ myconf+=( --with-default-ssl-backend=rustls )
+ else
+ eerror "We can't be here because of REQUIRED_USE."
+ die "Please file a bug, hit impossible condition w/ USE=ssl handling."
+ fi
+
+ else
+ myconf+=( --without-ssl )
+ einfo "SSL disabled"
+ fi
+
+ # These configuration options are organized alphabetically
+ # within each category. This should make it easier if we
+ # ever decide to make any of them contingent on USE flags:
+ # 1) protocols first. To see them all do
+ # 'grep SUPPORT_PROTOCOLS configure.ac'
+ # 2) --enable/disable options second.
+ # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
+ # 3) --with/without options third.
+ # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
+
+ myconf+=(
+ $(use_enable alt-svc)
+ --enable-basic-auth
+ --enable-bearer-auth
+ --enable-digest-auth
+ --enable-kerberos-auth
+ --enable-negotiate-auth
+ --enable-aws
+ --enable-dict
+ --disable-ech
+ --enable-file
+ $(use_enable ftp)
+ $(use_enable gopher)
+ $(use_enable hsts)
+ --enable-http
+ $(use_enable imap)
+ $(use_enable ldap)
+ $(use_enable ldap ldaps)
+ --enable-ntlm
+ $(use_enable pop3)
+ --enable-rt
+ --enable-rtsp
+ $(use_enable samba smb)
+ $(use_with ssh libssh2)
+ $(use_enable smtp)
+ $(use_enable telnet)
+ $(use_enable tftp)
+ --enable-tls-srp
+ $(use_enable adns ares)
+ --enable-cookies
+ --enable-dateparse
+ --enable-dnsshuffle
+ --enable-doh
+ --enable-symbol-hiding
+ --enable-http-auth
+ --enable-ipv6
+ --enable-largefile
+ --enable-manual
+ --enable-mime
+ --enable-netrc
+ $(use_enable progress-meter)
+ --enable-proxy
+ --enable-socketpair
+ --disable-sspi
+ $(use_enable static-libs static)
+ --enable-pthreads
+ --enable-threaded-resolver
+ --disable-versioned-symbols
+ --without-amissl
+ --without-bearssl
+ $(use_with brotli)
+ --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
+ $(use_with http2 nghttp2)
+ --without-hyper
+ $(use_with idn libidn2)
+ $(use_with kerberos gssapi "${EPREFIX}"/usr)
+ --without-libgsasl
+ $(use_with psl libpsl)
+ --without-msh3
+ $(use_with http3 nghttp3)
+ $(use_with curl_quic_ngtcp2 ngtcp2)
+ $(use_with curl_quic_openssl openssl-quic)
+ --without-quiche
+ $(use_with rtmp librtmp)
+ --without-schannel
+ --without-secure-transport
+ --without-test-caddy
+ --without-test-httpd
+ --without-test-nghttpx
+ $(use_enable websockets)
+ --without-winidn
+ --without-wolfssl
+ --with-zlib
+ $(use_with zstd)
+ --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
+ )
+
+ if use debug; then
+ myconf+=(
+ --enable-debug
+ )
+ fi
+
+ if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
+ myconf+=(
+ --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
+ )
+ fi
+
+ if [[ ${CHOST} == *mingw* ]] ; then
+ myconf+=(
+ --disable-pthreads
+ )
+ fi
+
+ ECONF_SOURCE="${S}" econf "${myconf[@]}"
+
+ if ! multilib_is_native_abi; then
+ # Avoid building the client (we just want libcurl for multilib)
+ sed -i -e '/SUBDIRS/s:src::' Makefile || die
+ sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
+ fi
+
+}
+
+multilib_src_compile() {
+ default
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts
+ fi
+}
+
+# There is also a pytest harness that tests for bugs in some very specific
+# situations; we can rely on upstream for this rather than adding additional test deps.
+multilib_src_test() {
+ # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
+ # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
+ # -v: verbose
+ # -a: keep going on failure (so we see everything that breaks, not just 1st test)
+ # -k: keep test files after completion
+ # -am: automake style TAP output
+ # -p: print logs if test fails
+ # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
+ # or just read https://github.com/curl/curl/tree/master/tests#run.
+ # Note: we don't run the testsuite for cross-compilation.
+ # Upstream recommend 7*nproc as a starting point for parallel tests, but
+ # this ends up breaking when nproc is huge (like -j80).
+ # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
+ # as most gentoo users don't have an 'ip6-localhost'
+ multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
+}
+
+multilib_src_install() {
+ emake DESTDIR="${D}" install
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
+ fi
+}
+
+multilib_src_install_all() {
+ einstalldocs
+ find "${ED}" -type f -name '*.la' -delete || die
+ rm -rf "${ED}"/etc/ || die
+}
+
+pkg_postinst() {
+ if use debug; then
+ ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
+ ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
+ ewarn "hic sunt dracones; you have been warned."
+ fi
+}
diff --git a/net-misc/curl/curl-8.9.1-r2.ebuild b/net-misc/curl/curl-8.9.1-r2.ebuild
new file mode 100644
index 0000000..3fe19dc
--- /dev/null
+++ b/net-misc/curl/curl-8.9.1-r2.ebuild
@@ -0,0 +1,380 @@
+# Copyright 1999-2025 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+# Maintainers should subscribe to the 'curl-distros' ML for backports etc
+# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
+# https://lists.haxx.se/listinfo/curl-distros
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
+inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
+
+DESCRIPTION="A Client that groks URLs"
+HOMEPAGE="https://curl.se/"
+
+if [[ ${PV} == 9999 ]]; then
+ inherit git-r3
+ EGIT_REPO_URI="https://github.com/curl/curl.git"
+else
+ SRC_URI="
+ https://curl.se/download/${P}.tar.xz
+ verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
+ "
+ KEYWORDS="~alpha amd64 arm arm64 hppa ~loong ~m68k ~mips ~ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+fi
+
+LICENSE="BSD curl ISC test? ( BSD-4 )"
+SLOT="0"
+IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
+IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp websockets zstd"
+# These select the default tls implementation / which quic impl to use
+IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
+RESTRICT="!test? ( test )"
+
+# Only one default ssl / quic provider can be enabled
+# The default provider needs its USE satisfied
+# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
+# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
+REQUIRED_USE="
+ quic? (
+ !curl_quic_openssl
+ curl_quic_ngtcp2
+ http3
+ ssl
+ )
+ ssl? (
+ ^^ (
+ curl_ssl_gnutls
+ curl_ssl_mbedtls
+ curl_ssl_openssl
+ curl_ssl_rustls
+ )
+ )
+ curl_quic_openssl? (
+ curl_ssl_openssl
+ quic
+ !gnutls
+ !mbedtls
+ !rustls
+ )
+ curl_quic_ngtcp2? (
+ quic
+ !mbedtls
+ !rustls
+ )
+ curl_ssl_gnutls? ( gnutls )
+ curl_ssl_mbedtls? ( mbedtls )
+ curl_ssl_openssl? ( openssl )
+ curl_ssl_rustls? ( rustls )
+ http3? ( alt-svc quic )
+"
+
+# cURL's docs and CI/CD are great resources for confirming supported versions
+# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
+# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
+# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
+# - https://github.com/curl/curl/blob/master/.github/workflows/quiche-linux.yml (CI/CD for TCP/2)
+# However 'supported' vs 'works' are two entirely different things; be sane but
+# don't be afraid to require a later version.
+# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
+RDEPEND="
+ >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
+ adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
+ brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
+ http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
+ http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
+ idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
+ ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
+ quic? (
+ curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
+ )
+ rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
+ ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
+ ssl? (
+ gnutls? (
+ app-misc/ca-certificates
+ >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
+ dev-libs/nettle:=[${MULTILIB_USEDEP}]
+ )
+ mbedtls? (
+ app-misc/ca-certificates
+ net-libs/mbedtls:0=[${MULTILIB_USEDEP}]
+ )
+ openssl? (
+ >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
+ )
+ rustls? (
+ >=net-libs/rustls-ffi-0.13.0:=[${MULTILIB_USEDEP}]
+ )
+ )
+ zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
+"
+
+DEPEND="${RDEPEND}"
+
+BDEPEND="
+ dev-lang/perl
+ virtual/pkgconfig
+ test? (
+ sys-apps/diffutils
+ http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
+ http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
+ )
+ verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
+"
+
+DOCS=( CHANGES README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
+
+MULTILIB_WRAPPED_HEADERS=(
+ /usr/include/curl/curlbuild.h
+)
+
+MULTILIB_CHOST_TOOLS=(
+ /usr/bin/curl-config
+)
+
+QA_CONFIG_IMPL_DECL_SKIP=(
+ __builtin_available
+ closesocket
+ CloseSocket
+ getpass_r
+ ioctlsocket
+ IoctlSocket
+ mach_absolute_time
+ setmode
+ _fseeki64
+ # custom AC_LINK_IFELSE code fails to link even without -Werror
+ OSSL_QUIC_client_method
+)
+
+PATCHES=(
+ "${FILESDIR}"/${PN}-prefix-2.patch
+ "${FILESDIR}"/${PN}-respect-cflags-3.patch
+ "${FILESDIR}"/${PN}-8.9.1-sigpipe.patch
+)
+
+src_prepare() {
+ default
+
+ eprefixify curl-config.in
+ eautoreconf
+}
+
+multilib_src_configure() {
+ # We make use of the fact that later flags override earlier ones
+ # So start with all ssl providers off until proven otherwise
+ # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
+ local myconf=()
+
+ myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
+ if use ssl; then
+ myconf+=( --without-gnutls --without-mbedtls --without-rustls )
+
+ if use gnutls; then
+ multilib_is_native_abi && einfo "SSL provided by gnutls"
+ myconf+=( --with-gnutls )
+ fi
+ if use mbedtls; then
+ multilib_is_native_abi && einfo "SSL provided by mbedtls"
+ myconf+=( --with-mbedtls )
+ fi
+ if use openssl; then
+ multilib_is_native_abi && einfo "SSL provided by openssl"
+ myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
+ fi
+ if use rustls; then
+ multilib_is_native_abi && einfo "SSL provided by rustls"
+ myconf+=( --with-rustls )
+ fi
+ if use curl_ssl_gnutls; then
+ multilib_is_native_abi && einfo "Default SSL provided by gnutls"
+ myconf+=( --with-default-ssl-backend=gnutls )
+ elif use curl_ssl_mbedtls; then
+ multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
+ myconf+=( --with-default-ssl-backend=mbedtls )
+ elif use curl_ssl_openssl; then
+ multilib_is_native_abi && einfo "Default SSL provided by openssl"
+ myconf+=( --with-default-ssl-backend=openssl )
+ elif use curl_ssl_rustls; then
+ multilib_is_native_abi && einfo "Default SSL provided by rustls"
+ myconf+=( --with-default-ssl-backend=rustls )
+ else
+ eerror "We can't be here because of REQUIRED_USE."
+ die "Please file a bug, hit impossible condition w/ USE=ssl handling."
+ fi
+
+ else
+ myconf+=( --without-ssl )
+ einfo "SSL disabled"
+ fi
+
+ # These configuration options are organized alphabetically
+ # within each category. This should make it easier if we
+ # ever decide to make any of them contingent on USE flags:
+ # 1) protocols first. To see them all do
+ # 'grep SUPPORT_PROTOCOLS configure.ac'
+ # 2) --enable/disable options second.
+ # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
+ # 3) --with/without options third.
+ # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
+
+ myconf+=(
+ $(use_enable alt-svc)
+ --enable-basic-auth
+ --enable-bearer-auth
+ --enable-digest-auth
+ --enable-kerberos-auth
+ --enable-negotiate-auth
+ --enable-aws
+ --enable-dict
+ --disable-ech
+ --enable-file
+ $(use_enable ftp)
+ $(use_enable gopher)
+ $(use_enable hsts)
+ --enable-http
+ $(use_enable imap)
+ $(use_enable ldap)
+ $(use_enable ldap ldaps)
+ --enable-ntlm
+ $(use_enable pop3)
+ --enable-rt
+ --enable-rtsp
+ $(use_enable samba smb)
+ $(use_with ssh libssh2)
+ $(use_enable smtp)
+ $(use_enable telnet)
+ $(use_enable tftp)
+ --enable-tls-srp
+ $(use_enable adns ares)
+ --enable-cookies
+ --enable-dateparse
+ --enable-dnsshuffle
+ --enable-doh
+ --enable-symbol-hiding
+ --enable-http-auth
+ --enable-ipv6
+ --enable-largefile
+ --enable-manual
+ --enable-mime
+ --enable-netrc
+ $(use_enable progress-meter)
+ --enable-proxy
+ --enable-socketpair
+ --disable-sspi
+ $(use_enable static-libs static)
+ --enable-pthreads
+ --enable-threaded-resolver
+ --disable-versioned-symbols
+ --without-amissl
+ --without-bearssl
+ $(use_with brotli)
+ --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
+ $(use_with http2 nghttp2)
+ --without-hyper
+ $(use_with idn libidn2)
+ $(use_with kerberos gssapi "${EPREFIX}"/usr)
+ --without-libgsasl
+ $(use_with psl libpsl)
+ --without-msh3
+ $(use_with http3 nghttp3)
+ $(use_with curl_quic_ngtcp2 ngtcp2)
+ $(use_with curl_quic_openssl openssl-quic)
+ --without-quiche
+ $(use_with rtmp librtmp)
+ --without-schannel
+ --without-secure-transport
+ --without-test-caddy
+ --without-test-httpd
+ --without-test-nghttpx
+ $(use_enable websockets)
+ --without-winidn
+ --without-wolfssl
+ --with-zlib
+ $(use_with zstd)
+ --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
+ )
+
+ if use debug; then
+ myconf+=(
+ --enable-debug
+ )
+ fi
+
+ if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
+ myconf+=(
+ --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
+ )
+ fi
+
+ if [[ ${CHOST} == *mingw* ]] ; then
+ myconf+=(
+ --disable-pthreads
+ )
+ fi
+
+ ECONF_SOURCE="${S}" econf "${myconf[@]}"
+
+ if ! multilib_is_native_abi; then
+ # Avoid building the client (we just want libcurl for multilib)
+ sed -i -e '/SUBDIRS/s:src::' Makefile || die
+ sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
+ fi
+
+}
+
+multilib_src_compile() {
+ default
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts
+ fi
+}
+
+# There is also a pytest harness that tests for bugs in some very specific
+# situations; we can rely on upstream for this rather than adding additional test deps.
+multilib_src_test() {
+ # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
+ # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
+ # -v: verbose
+ # -a: keep going on failure (so we see everything which breaks, not just 1st test)
+ # -k: keep test files after completion
+ # -am: automake style TAP output
+ # -p: print logs if test fails
+ # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
+ # or just read https://github.com/curl/curl/tree/master/tests#run.
+ # Note: we don't run the testsuite for cross-compilation.
+ # Upstream recommend 7*nproc as a starting point for parallel tests, but
+ # this ends up breaking when nproc is huge (like -j80).
+ # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
+ # as most gentoo users don't have an 'ip6-localhost'
+ multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
+}
+
+multilib_src_install() {
+ emake DESTDIR="${D}" install
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
+ fi
+}
+
+multilib_src_install_all() {
+ einstalldocs
+ find "${ED}" -type f -name '*.la' -delete || die
+ rm -rf "${ED}"/etc/ || die
+}
+
+pkg_postinst() {
+ if use debug; then
+ ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
+ ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
+ ewarn "hic sunt dracones; you have been warned."
+ fi
+}
^ permalink raw reply related [flat|nested] 10+ messages in thread* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2024-12-12 17:51 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2024-12-12 17:51 UTC (permalink / raw
To: gentoo-commits
commit: a881c8ae8012365b6cb18f03c0662ee5ddc3f72b
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Thu Dec 12 17:44:13 2024 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Thu Dec 12 17:44:13 2024 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=a881c8ae
net-misc/curl: add 8.11.1
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/Manifest | 2 +
net-misc/curl/curl-8.11.1.ebuild | 379 +++++++++++++++++++++++++++++++++++++++
2 files changed, 381 insertions(+)
diff --git a/net-misc/curl/Manifest b/net-misc/curl/Manifest
index 862b011..b6b6c4c 100644
--- a/net-misc/curl/Manifest
+++ b/net-misc/curl/Manifest
@@ -2,5 +2,7 @@ DIST curl-8.10.1.tar.xz 2726748 BLAKE2B bfdfa24f6d652884044c5e8eea5d70daad651b46
DIST curl-8.10.1.tar.xz.asc 488 BLAKE2B 8e8f2b628d4e8964a76c1c43c5557aacbfc2d2dbc51be8a0fa1b157c257f15f29aedba842cba7cb270c4adcf0b4a5d9c8b0b3d49633c48b061fb3e1472303d66 SHA512 21d6d560c027efc9e3e5db182a77501d6376442221ba910df817e2ec980bee44a9fe2afc698205f8d5e8313ae47915a341d60206a46b46e816d73ee357a894ac
DIST curl-8.11.0.tar.xz 2750684 BLAKE2B 3db13ed558bee332e07e1eab878b5ecae14cd049c115eea3a25fcb78cf28aadfe577dc224df75b62844529994ec478a9a74fed5c9bae338f809d231420ae5d0a SHA512 3a642d421e0a5c09ecb681bea18498f2c6124e9af4d8afdc074dfb85a9b0211d8972ade9cf00ab44b5dfed9303262cd83551dd3b5e0976d11fc19da3c4a0987e
DIST curl-8.11.0.tar.xz.asc 488 BLAKE2B 5d91dc654d6a62c66e344ca92676b42e7a49f437e14f9fb714f7ae64a266d24d9bb7006b4512fc323459072ff0d9e05f627e494f34f845eadbedbd83acacc2ce SHA512 71073dde48e8f0013e392eb88bf70f6b8a4a4f0c955a3fb56db98e74aa10acc1004e2a0483f30be082e61b59a76fa75ae1d90545ace7c6b07bca8164078375f0
+DIST curl-8.11.1.tar.xz 2751236 BLAKE2B a87ec2c78c5d6daf44eee4cf8e3ed124849d067f6c63145205fda18f33ddd3adce386058ead8f9b713f8e595f5e059acd13479eb00edc226247aabd3c2234112 SHA512 7c7c47a49505575b610c56b455f0919ea5082a993bf5483eeb258ead167aadb87078d626b343b417dcfc5439c53556425c8fb4fe3b01b53a87b47c01686a3e57
+DIST curl-8.11.1.tar.xz.asc 488 BLAKE2B 53d58ebb8ab722d8394b7ce94b646c876324cd89b3e47d9129bddcfbb6db338c1dbe93a5e72a25caf7be9ddd450c2b0832cfee17beb8ba701bdeefe653235d53 SHA512 c09bedb67e83fb8ca3ad73c5bd0d92fed7fc2c26dbe5a71cccb193fd151c7219713241a9fe74baefcd1d008cfafba78142bf04cec24dd4a88d67179184d35824
DIST curl-8.9.1.tar.xz 2782364 BLAKE2B 6e38e20e2b03ab5bfbb8d9797442dfdd9644fc80d7b1f7c1efb1f44e0d730524e82ccf7413b2c6f4555bd61ae42f91ec7c0201e2c0d563811c85164aa234aada SHA512 a0fe234402875db194aad4e4208b7e67e7ffc1562622eea90948d4b9b0122c95c3dde8bbe2f7445a687cb3de7cb09f20e5819d424570442d976aa4c913227fc7
DIST curl-8.9.1.tar.xz.asc 488 BLAKE2B 437268f6e5ba5db73f205fd87f3ded1e5fc200e8bf63a83cdb7e21dfbf2f4a4620e598cd0bf5d8fa1548ade08d45b386599542cd988df46a238b85790409f42e SHA512 18acd58436d70900ab6912b84774da2c451b9dbfc83d6d00f85bbbe7894b67075918e58956fdb753fcc1486e4f10caa31139d7c68b037d7c83dc2e9c2fae9f9b
diff --git a/net-misc/curl/curl-8.11.1.ebuild b/net-misc/curl/curl-8.11.1.ebuild
new file mode 100644
index 0000000..60486cb
--- /dev/null
+++ b/net-misc/curl/curl-8.11.1.ebuild
@@ -0,0 +1,379 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+# Maintainers should subscribe to the 'curl-distros' ML for backports etc
+# https://daniel.haxx.se/blog/2024/03/25/curl-distro-report/
+# https://lists.haxx.se/listinfo/curl-distros
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/danielstenberg.asc
+inherit autotools multilib-minimal multiprocessing prefix toolchain-funcs verify-sig
+
+DESCRIPTION="A Client that groks URLs"
+HOMEPAGE="https://curl.se/"
+
+if [[ ${PV} == 9999 ]]; then
+ inherit git-r3
+ EGIT_REPO_URI="https://github.com/curl/curl.git"
+else
+ SRC_URI="
+ https://curl.se/download/${P}.tar.xz
+ verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
+ "
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+fi
+
+LICENSE="BSD curl ISC test? ( BSD-4 )"
+SLOT="0"
+IUSE="+adns +alt-svc brotli debug +ftp gnutls gopher +hsts +http2 +http3 idn +imap kerberos ldap mbedtls +openssl +pop3"
+IUSE+=" +psl +progress-meter +quic rtmp rustls samba +smtp ssh ssl sslv3 static-libs test telnet +tftp +websockets zstd"
+# These select the default tls implementation / which quic impl to use
+IUSE+=" +curl_quic_openssl curl_quic_ngtcp2 curl_ssl_gnutls curl_ssl_mbedtls +curl_ssl_openssl curl_ssl_rustls"
+RESTRICT="!test? ( test )"
+
+# Only one default ssl / quic provider can be enabled
+# The default provider needs its USE satisfied
+# HTTP/3 and MultiSSL are mutually exclusive; it's not clear if MultiSSL offers any benefit at all in the modern day.
+# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
+REQUIRED_USE="
+ quic? (
+ !curl_quic_openssl
+ curl_quic_ngtcp2
+ http3
+ ssl
+ )
+ ssl? (
+ ^^ (
+ curl_ssl_gnutls
+ curl_ssl_mbedtls
+ curl_ssl_openssl
+ curl_ssl_rustls
+ )
+ )
+ curl_quic_openssl? (
+ curl_ssl_openssl
+ quic
+ !gnutls
+ !mbedtls
+ !rustls
+ )
+ curl_quic_ngtcp2? (
+ quic
+ !mbedtls
+ !rustls
+ )
+ curl_ssl_gnutls? ( gnutls )
+ curl_ssl_mbedtls? ( mbedtls )
+ curl_ssl_openssl? ( openssl )
+ curl_ssl_rustls? ( rustls )
+ http3? ( alt-svc quic )
+"
+
+# cURL's docs and CI/CD are great resources for confirming supported versions
+# particulary for fast-moving targets like HTTP/2 and TCP/2 e.g.:
+# - https://github.com/curl/curl/blob/master/docs/INTERNALS.md (core dependencies + minimum versions)
+# - https://github.com/curl/curl/blob/master/docs/HTTP3.md (example of a feature that moves quickly)
+# - https://github.com/curl/curl/blob/master/.github/workflows/http3-linux.yml (CI/CD for TCP/2)
+# However 'supported' vs 'works' are two entirely different things; be sane but
+# don't be afraid to require a later version.
+# ngtcp2 = https://bugs.gentoo.org/912029 - can only build with one tls backend at a time.
+RDEPEND="
+ >=sys-libs/zlib-1.1.4[${MULTILIB_USEDEP}]
+ adns? ( >=net-dns/c-ares-1.16.0:=[${MULTILIB_USEDEP}] )
+ brotli? ( app-arch/brotli:=[${MULTILIB_USEDEP}] )
+ http2? ( >=net-libs/nghttp2-1.15.0:=[${MULTILIB_USEDEP}] )
+ http3? ( >=net-libs/nghttp3-1.1.0[${MULTILIB_USEDEP}] )
+ idn? ( >=net-dns/libidn2-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ kerberos? ( >=virtual/krb5-0-r1[${MULTILIB_USEDEP}] )
+ ldap? ( >=net-nds/openldap-2.0.0:=[static-libs?,${MULTILIB_USEDEP}] )
+ psl? ( net-libs/libpsl[${MULTILIB_USEDEP}] )
+ quic? (
+ curl_quic_openssl? ( >=dev-libs/openssl-3.3.0:=[quic,${MULTILIB_USEDEP}] )
+ curl_quic_ngtcp2? ( >=net-libs/ngtcp2-1.2.0[ssl,${MULTILIB_USEDEP}] )
+ )
+ rtmp? ( media-video/rtmpdump[${MULTILIB_USEDEP}] )
+ ssh? ( >=net-libs/libssh2-1.0.0[${MULTILIB_USEDEP}] )
+ ssl? (
+ gnutls? (
+ app-misc/ca-certificates
+ >=net-libs/gnutls-3.1.10:=[static-libs?,${MULTILIB_USEDEP}]
+ dev-libs/nettle:=[${MULTILIB_USEDEP}]
+ )
+ mbedtls? (
+ app-misc/ca-certificates
+ net-libs/mbedtls:=[${MULTILIB_USEDEP}]
+ )
+ openssl? (
+ >=dev-libs/openssl-0.9.7:=[sslv3(-)=,static-libs?,${MULTILIB_USEDEP}]
+ )
+ rustls? (
+ >=net-libs/rustls-ffi-0.14.0:=[${MULTILIB_USEDEP}]
+ )
+ )
+ zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] )
+"
+
+DEPEND="${RDEPEND}"
+
+BDEPEND="
+ dev-lang/perl
+ virtual/pkgconfig
+ test? (
+ sys-apps/diffutils
+ http2? ( >=net-libs/nghttp2-1.15.0:=[utils,${MULTILIB_USEDEP}] )
+ http3? ( net-libs/nghttp2:=[utils,${MULTILIB_USEDEP}] )
+ )
+ verify-sig? ( sec-keys/openpgp-keys-danielstenberg )
+"
+
+DOCS=( README docs/{FEATURES.md,INTERNALS.md,FAQ,BUGS.md,CONTRIBUTE.md} )
+
+MULTILIB_WRAPPED_HEADERS=(
+ /usr/include/curl/curlbuild.h
+)
+
+MULTILIB_CHOST_TOOLS=(
+ /usr/bin/curl-config
+)
+
+QA_CONFIG_IMPL_DECL_SKIP=(
+ __builtin_available
+ closesocket
+ CloseSocket
+ getpass_r
+ ioctlsocket
+ IoctlSocket
+ mach_absolute_time
+ setmode
+ _fseeki64
+ # custom AC_LINK_IFELSE code fails to link even without -Werror
+ OSSL_QUIC_client_method
+)
+
+PATCHES=(
+ "${FILESDIR}/${PN}-prefix-3.patch"
+ "${FILESDIR}/${PN}-respect-cflags-3.patch"
+)
+
+src_prepare() {
+ default
+
+ eprefixify curl-config.in
+ eautoreconf
+}
+
+multilib_src_configure() {
+ # We make use of the fact that later flags override earlier ones
+ # So start with all ssl providers off until proven otherwise
+ # TODO: in the future, we may want to add wolfssl (https://www.wolfssl.com/)
+ local myconf=()
+
+ myconf+=( --without-ca-fallback --with-ca-bundle="${EPREFIX}"/etc/ssl/certs/ca-certificates.crt )
+ if use ssl; then
+ myconf+=( --without-gnutls --without-mbedtls --without-rustls )
+
+ if use gnutls; then
+ multilib_is_native_abi && einfo "SSL provided by gnutls"
+ myconf+=( --with-gnutls )
+ fi
+ if use mbedtls; then
+ multilib_is_native_abi && einfo "SSL provided by mbedtls"
+ myconf+=( --with-mbedtls )
+ fi
+ if use openssl; then
+ multilib_is_native_abi && einfo "SSL provided by openssl"
+ myconf+=( --with-ssl --with-ca-path="${EPREFIX}"/etc/ssl/certs )
+ fi
+ if use rustls; then
+ multilib_is_native_abi && einfo "SSL provided by rustls"
+ myconf+=( --with-rustls )
+ fi
+ if use curl_ssl_gnutls; then
+ multilib_is_native_abi && einfo "Default SSL provided by gnutls"
+ myconf+=( --with-default-ssl-backend=gnutls )
+ elif use curl_ssl_mbedtls; then
+ multilib_is_native_abi && einfo "Default SSL provided by mbedtls"
+ myconf+=( --with-default-ssl-backend=mbedtls )
+ elif use curl_ssl_openssl; then
+ multilib_is_native_abi && einfo "Default SSL provided by openssl"
+ myconf+=( --with-default-ssl-backend=openssl )
+ elif use curl_ssl_rustls; then
+ multilib_is_native_abi && einfo "Default SSL provided by rustls"
+ myconf+=( --with-default-ssl-backend=rustls )
+ else
+ eerror "We can't be here because of REQUIRED_USE."
+ die "Please file a bug, hit impossible condition w/ USE=ssl handling."
+ fi
+
+ else
+ myconf+=( --without-ssl )
+ einfo "SSL disabled"
+ fi
+
+ # These configuration options are organized alphabetically
+ # within each category. This should make it easier if we
+ # ever decide to make any of them contingent on USE flags:
+ # 1) protocols first. To see them all do
+ # 'grep SUPPORT_PROTOCOLS configure.ac'
+ # 2) --enable/disable options second.
+ # 'grep -- --enable configure | grep Check | awk '{ print $4 }' | sort
+ # 3) --with/without options third.
+ # grep -- --with configure | grep Check | awk '{ print $4 }' | sort
+
+ myconf+=(
+ $(use_enable alt-svc)
+ --enable-basic-auth
+ --enable-bearer-auth
+ --enable-digest-auth
+ --enable-kerberos-auth
+ --enable-negotiate-auth
+ --enable-aws
+ --enable-dict
+ --disable-ech
+ --enable-file
+ $(use_enable ftp)
+ $(use_enable gopher)
+ $(use_enable hsts)
+ --enable-http
+ $(use_enable imap)
+ $(use_enable ldap)
+ $(use_enable ldap ldaps)
+ --enable-ntlm
+ $(use_enable pop3)
+ --enable-rt
+ --enable-rtsp
+ $(use_enable samba smb)
+ $(use_with ssh libssh2)
+ $(use_enable smtp)
+ $(use_enable telnet)
+ $(use_enable tftp)
+ --enable-tls-srp
+ $(use_enable adns ares)
+ --enable-cookies
+ --enable-dateparse
+ --enable-dnsshuffle
+ --enable-doh
+ --enable-symbol-hiding
+ --enable-http-auth
+ --enable-ipv6
+ --enable-largefile
+ --enable-manual
+ --enable-mime
+ --enable-netrc
+ $(use_enable progress-meter)
+ --enable-proxy
+ --enable-socketpair
+ --disable-sspi
+ $(use_enable static-libs static)
+ --enable-pthreads
+ --enable-threaded-resolver
+ --disable-versioned-symbols
+ --without-amissl
+ --without-bearssl
+ $(use_with brotli)
+ --with-fish-functions-dir="${EPREFIX}"/usr/share/fish/vendor_completions.d
+ $(use_with http2 nghttp2)
+ --without-hyper
+ $(use_with idn libidn2)
+ $(use_with kerberos gssapi "${EPREFIX}"/usr)
+ --without-libgsasl
+ $(use_with psl libpsl)
+ --without-msh3
+ $(use_with http3 nghttp3)
+ $(use_with curl_quic_ngtcp2 ngtcp2)
+ $(use_with curl_quic_openssl openssl-quic)
+ --without-quiche
+ $(use_with rtmp librtmp)
+ --without-schannel
+ --without-secure-transport
+ --without-test-caddy
+ --without-test-httpd
+ --without-test-nghttpx
+ $(use_enable websockets)
+ --without-winidn
+ --without-wolfssl
+ --with-zlib
+ $(use_with zstd)
+ --with-zsh-functions-dir="${EPREFIX}"/usr/share/zsh/site-functions
+ )
+
+ if use debug; then
+ myconf+=(
+ --enable-debug
+ )
+ fi
+
+ if use test && multilib_is_native_abi && ( use http2 || use http3 ); then
+ myconf+=(
+ --with-test-nghttpx="${BROOT}/usr/bin/nghttpx"
+ )
+ fi
+
+ if [[ ${CHOST} == *mingw* ]] ; then
+ myconf+=(
+ --disable-pthreads
+ )
+ fi
+
+ ECONF_SOURCE="${S}" econf "${myconf[@]}"
+
+ if ! multilib_is_native_abi; then
+ # Avoid building the client (we just want libcurl for multilib)
+ sed -i -e '/SUBDIRS/s:src::' Makefile || die
+ sed -i -e '/SUBDIRS/s:scripts::' Makefile || die
+ fi
+
+}
+
+multilib_src_compile() {
+ default
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts
+ fi
+}
+
+# There is also a pytest harness that tests for bugs in some very specific
+# situations; we can rely on upstream for this rather than adding additional test deps.
+multilib_src_test() {
+ # See https://github.com/curl/curl/blob/master/tests/runtests.pl#L5721
+ # -n: no valgrind (unreliable in sandbox and doesn't work correctly on all arches)
+ # -v: verbose
+ # -a: keep going on failure (so we see everything that breaks, not just 1st test)
+ # -k: keep test files after completion
+ # -am: automake style TAP output
+ # -p: print logs if test fails
+ # Note: if needed, we can skip specific tests. See e.g. Fedora's packaging
+ # or just read https://github.com/curl/curl/tree/master/tests#run.
+ # Note: we don't run the testsuite for cross-compilation.
+ # Upstream recommend 7*nproc as a starting point for parallel tests, but
+ # this ends up breaking when nproc is huge (like -j80).
+ # The network sandbox causes tests 241 and 1083 to fail; these are typically skipped
+ # as most gentoo users don't have an 'ip6-localhost'
+ multilib_is_native_abi && emake test TFLAGS="-n -v -a -k -am -p -j$((2*$(makeopts_jobs))) !241 !1083"
+}
+
+multilib_src_install() {
+ emake DESTDIR="${D}" install
+
+ if multilib_is_native_abi; then
+ # Shell completions
+ ! tc-is-cross-compiler && emake -C scripts DESTDIR="${D}" install
+ fi
+}
+
+multilib_src_install_all() {
+ einstalldocs
+ find "${ED}" -type f -name '*.la' -delete || die
+ rm -rf "${ED}"/etc/ || die
+}
+
+pkg_postinst() {
+ if use debug; then
+ ewarn "USE=debug has been selected, enabling debug codepaths and making cURL extra verbose."
+ ewarn "Use this _only_ for testing. Debug builds should _not_ be used in anger."
+ ewarn "hic sunt dracones; you have been warned."
+ fi
+}
^ permalink raw reply related [flat|nested] 10+ messages in thread* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2024-11-10 16:03 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2024-11-10 16:03 UTC (permalink / raw
To: gentoo-commits
commit: 3f0065eed0781f196f64a25fb41ad960daae41a4
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Sun Nov 10 16:02:14 2024 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Sun Nov 10 16:02:14 2024 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=3f0065ee
net-misc/curl: fix REQUIRED_USE for libressl
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/curl-8.10.1-r1.ebuild | 6 ++----
net-misc/curl/curl-8.9.1-r1.ebuild | 6 ++----
2 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/net-misc/curl/curl-8.10.1-r1.ebuild b/net-misc/curl/curl-8.10.1-r1.ebuild
index cfe9c3e..c86b1a5 100644
--- a/net-misc/curl/curl-8.10.1-r1.ebuild
+++ b/net-misc/curl/curl-8.10.1-r1.ebuild
@@ -38,10 +38,8 @@ RESTRICT="!test? ( test )"
# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
REQUIRED_USE="
quic? (
- ^^ (
- curl_quic_openssl
- curl_quic_ngtcp2
- )
+ !curl_quic_openssl
+ curl_quic_ngtcp2
http3
ssl
)
diff --git a/net-misc/curl/curl-8.9.1-r1.ebuild b/net-misc/curl/curl-8.9.1-r1.ebuild
index 599bb2d..242d131 100644
--- a/net-misc/curl/curl-8.9.1-r1.ebuild
+++ b/net-misc/curl/curl-8.9.1-r1.ebuild
@@ -38,10 +38,8 @@ RESTRICT="!test? ( test )"
# https://github.com/curl/curl/commit/65ece771f4602107d9cdd339dff4b420280a2c2e
REQUIRED_USE="
quic? (
- ^^ (
- curl_quic_openssl
- curl_quic_ngtcp2
- )
+ !curl_quic_openssl
+ curl_quic_ngtcp2
http3
ssl
)
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/
@ 2024-11-08 17:18 orbea
0 siblings, 0 replies; 10+ messages in thread
From: orbea @ 2024-11-08 17:18 UTC (permalink / raw
To: gentoo-commits
commit: 15f61cdd721e0cee122336d74c932e815a2d1255
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Fri Nov 8 17:15:23 2024 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Fri Nov 8 17:15:23 2024 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=15f61cdd
net-misc/curl: stabilize 8.9.1-r1 for arm, hppa
Signed-off-by: orbea <orbea <AT> riseup.net>
net-misc/curl/curl-8.9.1-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net-misc/curl/curl-8.9.1-r1.ebuild b/net-misc/curl/curl-8.9.1-r1.ebuild
index 8f952f6..599bb2d 100644
--- a/net-misc/curl/curl-8.9.1-r1.ebuild
+++ b/net-misc/curl/curl-8.9.1-r1.ebuild
@@ -21,7 +21,7 @@ else
https://curl.se/download/${P}.tar.xz
verify-sig? ( https://curl.se/download/${P}.tar.xz.asc )
"
- KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~loong ~m68k ~mips ~ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+ KEYWORDS="~alpha amd64 arm arm64 hppa ~loong ~m68k ~mips ~ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
fi
LICENSE="BSD curl ISC test? ( BSD-4 )"
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2025-02-07 15:41 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-11-08 17:18 [gentoo-commits] repo/proj/libressl:master commit in: net-misc/curl/ orbea
-- strict thread matches above, loose matches on Subject: below --
2025-02-07 15:41 orbea
2025-02-06 18:44 orbea
2025-02-05 15:02 orbea
2025-02-05 15:02 orbea
2025-01-08 14:36 orbea
2025-01-08 14:36 orbea
2024-12-12 17:51 orbea
2024-11-10 16:03 orbea
2024-11-08 17:18 orbea
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox