* [gentoo-commits] proj/catalyst:dilfridge/qcow2 commit in: diskimage/files/, diskimage/fstar/
@ 2024-09-27 22:54 Andreas K. Hüttel
0 siblings, 0 replies; only message in thread
From: Andreas K. Hüttel @ 2024-09-27 22:54 UTC (permalink / raw
To: gentoo-commits
commit: 152ee71867f03e227cc9c943f464c0a0b81048eb
Author: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 27 22:54:17 2024 +0000
Commit: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Fri Sep 27 22:54:17 2024 +0000
URL: https://gitweb.gentoo.org/proj/catalyst.git/commit/?id=152ee718
Cleanup
Signed-off-by: Andreas K. Hüttel <dilfridge <AT> gentoo.org>
diskimage/files/README.txt | 111 ---------------------
diskimage/files/generic.motd.txt | 4 +-
diskimage/files/livecd-bash_profile | 4 -
diskimage/files/livecd-bashrc | 1 -
diskimage/files/livecd-local.start | 20 ----
diskimage/files/livecd.motd.txt | 11 --
diskimage/files/minimal.motd.txt | 11 --
diskimage/fstar/.keep | 0
.../fstar/aboot-1.0_pre20040408-r2-cdtar.tar.bz2 | Bin 24602 -> 0 bytes
diskimage/fstar/arcload-0.43-r1.tbz2 | Bin 24668 -> 0 bytes
.../fstar/isolinux-elilo-memtest86+-cdtar.tar.bz2 | Bin 210434 -> 0 bytes
11 files changed, 1 insertion(+), 161 deletions(-)
diff --git a/diskimage/files/README.txt b/diskimage/files/README.txt
deleted file mode 100644
index ebf67691..00000000
--- a/diskimage/files/README.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-
-This lists the possible command line options that can be used to tweak the boot
-process of this CD. This lists the Gentoo-specific options, along with a few
-options that are built-in to the kernel, but that have been proven very useful
-to our users. Also, all options that start with "do" have a "no" inverse, that
-does the opposite. For example, "doscsi" enables SCSI support in the initial
-ramdisk boot, while "noscsi" disables it.
-
-
-Hardware options:
-acpi=on This loads support for ACPI and also causes the acpid daemon to
- be started by the CD on boot. This is only needed if your
- system requires ACPI to function properly. This is not
- required for Hyperthreading support.
-acpi=off Completely disables ACPI. This is useful on some older systems
- and is also a requirement for using APM. This will disable any
- Hyperthreading support of your processor.
-console=X This sets up serial console access for the CD. The first
- option is the device, usually ttyS0 on x86, followed by any
- connection options, which are comma separated. The default
- options are 9600,8,n,1.
-dmraid=X This allows for passing options to the device-mapper RAID
- subsystem. Options should be encapsulated in quotes.
-doapm This loads APM driver support. This requires you to also use
- acpi=off.
-dopcmcia This loads support for PCMCIA and Cardbus hardware and also
- causes the pcmcia cardmgr to be started by the CD on boot.
- This is only required when booting from PCMCIA/Cardbus devices.
-doscsi This loads support for most SCSI controllers. This is also a
- requirement for booting most USB devices, as they use the SCSI
- subsystem of the kernel.
-hda=stroke This allows you to partition the whole hard disk even when your
- BIOS is unable to handle large disks. This option is only used
- on machines with an older BIOS. Replace hda with the device
- that is requiring this option.
-ide=nodma This forces the disabling of DMA in the kernel and is required
- by some IDE chipsets and also by some CDROM drives. If your
- system is having trouble reading from your IDE CDROM, try this
- option. This also disables the default hdparm settings from
- being executed.
-noapic This disables the Advanced Programmable Interrupt Controller
- that is present on newer motherboards. It has been known to
- cause some problems on older hardware.
-nodetect This disables all of the autodetection done by the CD,
- including device autodetection and DHCP probing. This is
- useful for doing debugging of a failing CD or driver.
-nodhcp This disables DHCP probing on detected network cards. This is
- useful on networks with only static addresses.
-nodmraid Disables support for device-mapper RAID, such as that used for
- on-board IDE/SATA RAID controllers.
-nofirewire This disables the loading of Firewire modules. This should
- only be necessary if your Firewire hardware is causing
- a problem with booting the CD.
-nogpm This diables gpm console mouse support.
-nohotplug This disables the loading of the hotplug and coldplug init
- scripts at boot. This is useful for doing debugging of a
- failing CD or driver.
-nokeymap This disables the keymap selection used to select non-US
- keyboard layouts.
-nolapic This disables the local APIC on Uniprocessor kernels.
-nosata This disables the loading of Serial ATA modules. This is used
- if your system is having problems with the SATA subsystem.
-nosmp This disables SMP, or Symmetric Multiprocessing, on SMP-enabled
- kernels. This is useful for debugging SMP-related issues with
- certain drivers and motherboards.
-nosound This disables sound support and volume setting. This is useful
- for systems where sound support causes problems.
-nousb This disables the autoloading of USB modules. This is useful
- for debugging USB issues.
-slowusb This adds some extra pauses into the boot process for slow
- USB CDROMs, like in the IBM BladeCenter.
-Volume/Device Management:
-doevms This enables support for IBM's pluggable EVMS, or Enterprise
- Volume Management System. This is not safe to use with lvm2.
-dolvm This enables support for Linux's Logical Volume Management.
- This is not safe to use with evms2.
-Screen reader access:
-speakup.synth=synth starts speakup using a given synthesizer.
- supported synths are acntpc, acntsa, apollo, audptr, bns,
- decext, dectlk, dtlk, keypc, ltlk, spkout and txprt.
- Also, soft is supported for software speech and dummy is
- supported for testing.
-speakup.quiet=1 sets the synthesizer not to speak until a key is pressed.
-speakup_SYNTH.port=n sets the port for internal synthesizers.
-speakup_SYNTH.ser=n sets the serial port for external synthesizers.
-Other options:
-debug Enables debugging code. This might get messy, as it displays
- a lot of data to the screen.
-docache This caches the entire runtime portion of the CD into RAM,
- which allows you to umount /mnt/cdrom and mount another CDROM.
- This option requires that you have at least twice as much
- available RAM as the size of the CD.
-doload=X This causes the initial ramdisk to load any module listed, as
- well as dependencies. Replace X with the module name.
- Multiple modules can be specified by a comma-separated list.
-dosshd Starts sshd on boot, which is useful for unattended installs.
-passwd=foo Sets whatever follows the equals as the root password, which
- is required for dosshd since we scramble the root password.
-noload=X This causes the initial ramdisk to skip the loading of a
- specific module that may be causing a problem. Syntax matches
- that of doload.
-nogui This causes an X-enabled LiveCD to not automatically start X,
- but rather, to drop to the command line instead.
-nonfs Disables the starting of portmap/nfsmount on boot.
-scandelay This causes the CD to pause for 10 seconds during certain
- portions the boot process to allow for devices that are slow to
- initialize to be ready for use.
-scandelay=X This allows you to specify a given delay, in seconds, to be
- added to certain portions of the boot process to allow for
- devices that are slow to initialize to be ready for use.
- Replace X with the number of seconds to pause.
diff --git a/diskimage/files/generic.motd.txt b/diskimage/files/generic.motd.txt
index fb931d6c..0ba415de 100644
--- a/diskimage/files/generic.motd.txt
+++ b/diskimage/files/generic.motd.txt
@@ -3,7 +3,5 @@
The root password on this system has been auto-scrambled for security.
If any ethernet adapters were detected at boot, they should be auto-configured
-if DHCP is available on your network. Type "net-setup eth0" to specify eth0 IP
-address settings by hand.
+if DHCP is available on your network.
-Check /etc/kernels/kernel-config-* for kernel configuration(s).
diff --git a/diskimage/files/livecd-bash_profile b/diskimage/files/livecd-bash_profile
deleted file mode 100644
index cebe8ca2..00000000
--- a/diskimage/files/livecd-bash_profile
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/bash
-
-#This file is sourced by bash when you log in interactively.
-[[ -f ~/.bashrc ]] && source ~/.bashrc
diff --git a/diskimage/files/livecd-bashrc b/diskimage/files/livecd-bashrc
deleted file mode 100644
index a9bf588e..00000000
--- a/diskimage/files/livecd-bashrc
+++ /dev/null
@@ -1 +0,0 @@
-#!/bin/bash
diff --git a/diskimage/files/livecd-local.start b/diskimage/files/livecd-local.start
deleted file mode 100644
index a7bb2bef..00000000
--- a/diskimage/files/livecd-local.start
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/bash
-# /etc/conf.d/local.start
-
-# This is a good place to load any misc.
-# programs on startup ( 1>&2 )
-
-#if [ -d /usr/livecd/db ]
-#then
-# ln -sf /usr/livecd/db /var/db
-#fi
-
-if [ -d /usr/livecd/profiles ]
-then
- ln -sf /usr/livecd/profiles /var/db/repos/gentoo/profiles
-fi
-
-if [ -d /usr/livecd/eclass ]
-then
- ln -sf /usr/livecd/eclass /var/db/repos/gentoo/eclass
-fi
diff --git a/diskimage/files/livecd.motd.txt b/diskimage/files/livecd.motd.txt
deleted file mode 100644
index 029c2f6e..00000000
--- a/diskimage/files/livecd.motd.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-The latest version of the Handbook is always available from the Gentoo web
-site by typing "links https://wiki.gentoo.org/wiki/Handbook".
-
-To start an ssh server on this system, type "/etc/init.d/sshd start". If you
-need to log in remotely as root, type "passwd root" to reset root's password
-to a known value.
-
-Please report any bugs you find to https://bugs.gentoo.org. Be sure to include
-detailed information about how to reproduce the bug you are reporting.
-
-Thank you for using Gentoo Linux!
diff --git a/diskimage/files/minimal.motd.txt b/diskimage/files/minimal.motd.txt
deleted file mode 100644
index 029c2f6e..00000000
--- a/diskimage/files/minimal.motd.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-The latest version of the Handbook is always available from the Gentoo web
-site by typing "links https://wiki.gentoo.org/wiki/Handbook".
-
-To start an ssh server on this system, type "/etc/init.d/sshd start". If you
-need to log in remotely as root, type "passwd root" to reset root's password
-to a known value.
-
-Please report any bugs you find to https://bugs.gentoo.org. Be sure to include
-detailed information about how to reproduce the bug you are reporting.
-
-Thank you for using Gentoo Linux!
diff --git a/diskimage/fstar/.keep b/diskimage/fstar/.keep
new file mode 100644
index 00000000..e69de29b
diff --git a/diskimage/fstar/aboot-1.0_pre20040408-r2-cdtar.tar.bz2 b/diskimage/fstar/aboot-1.0_pre20040408-r2-cdtar.tar.bz2
deleted file mode 100644
index 58a46f40..00000000
Binary files a/diskimage/fstar/aboot-1.0_pre20040408-r2-cdtar.tar.bz2 and /dev/null differ
diff --git a/diskimage/fstar/arcload-0.43-r1.tbz2 b/diskimage/fstar/arcload-0.43-r1.tbz2
deleted file mode 100644
index 77ce2cb4..00000000
Binary files a/diskimage/fstar/arcload-0.43-r1.tbz2 and /dev/null differ
diff --git a/diskimage/fstar/isolinux-elilo-memtest86+-cdtar.tar.bz2 b/diskimage/fstar/isolinux-elilo-memtest86+-cdtar.tar.bz2
deleted file mode 100644
index 93e7dc88..00000000
Binary files a/diskimage/fstar/isolinux-elilo-memtest86+-cdtar.tar.bz2 and /dev/null differ
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2024-09-27 22:54 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-09-27 22:54 [gentoo-commits] proj/catalyst:dilfridge/qcow2 commit in: diskimage/files/, diskimage/fstar/ Andreas K. Hüttel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox