* [gentoo-commits] repo/gentoo:master commit in: profiles/default/linux/ia64/17.0/desktop/gnome/systemd/merged-usr/, ...
@ 2024-05-30 22:16 Andreas K. Hüttel
0 siblings, 0 replies; only message in thread
From: Andreas K. Hüttel @ 2024-05-30 22:16 UTC (permalink / raw
To: gentoo-commits
commit: 2efecd5f130ede5acfb03a1ff44be9322d99e33a
Author: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
AuthorDate: Thu May 30 14:21:41 2024 +0000
Commit: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Thu May 30 22:16:02 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2efecd5f
profiles: deprecate ia64 17.0 profiles
Signed-off-by: Andreas K. Hüttel <dilfridge <AT> gentoo.org>
profiles/default/linux/ia64/17.0/deprecated | 104 +++++++++++++++++++++
.../default/linux/ia64/17.0/desktop/deprecated | 104 +++++++++++++++++++++
.../linux/ia64/17.0/desktop/gnome/deprecated | 104 +++++++++++++++++++++
.../desktop/gnome/systemd/merged-usr/deprecated | 104 +++++++++++++++++++++
.../default/linux/ia64/17.0/developer/deprecated | 104 +++++++++++++++++++++
.../linux/ia64/17.0/systemd/merged-usr/deprecated | 104 +++++++++++++++++++++
6 files changed, 624 insertions(+)
diff --git a/profiles/default/linux/ia64/17.0/deprecated b/profiles/default/linux/ia64/17.0/deprecated
new file mode 100644
index 000000000000..db515b7e21ae
--- /dev/null
+++ b/profiles/default/linux/ia64/17.0/deprecated
@@ -0,0 +1,104 @@
+default/linux/ia64/23.0/split-usr
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+ your system fully and depclean before proceeding.
+ glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles
+ (other than x32 or musl), then first complete the migration to the
+ corresponding 17.1 profile. Instructions can be found at [3].
+
+3. If you are currently using systemd in a split-usr configuration, then first
+ complete the migration to the corresponding merged-usr profile of the
+ same profile version. Details on how to do this can be found in the news
+ item [4].
+ If you are currently using openrc, migrate to 23.0 first, keeping your disk
+ layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+ remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+ "eselect profile" or by manually setting the profile symlink.
+ Note that old profiles are by default split-usr and the 23.0 profiles by
+ default merged-usr. Do NOT change directory scheme now, since this will
+ mess up your system!
+ Instead, make sure that the new profile has the same property: for example,
+ OLD default/linux/amd64/17.1
+ ==> NEW default/linux/amd64/23.0/split-usr
+ (added "split-usr")
+ OLD default/linux/amd64/17.1/systemd/merged-usr
+ ==> NEW default/linux/amd64/23.0/systemd
+ (removed "merged-usr")
+ A detailed table of the upgrade paths can be found at [5]. Please consult it.
+ In some cases (hppa, x86) the table will tell you to pick between two choices.
+ What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+ rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+ the URI in all configuration such that they point to 23.0 profile binhost
+ directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+ this order, with the same version as already active:
+ emerge --ask --oneshot sys-devel/binutils
+ (you may have to run binutils-config and re-select your binutils now)
+ emerge --ask --oneshot sys-devel/gcc
+ (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do
+ that; instead, abort and try again with --nodeps added to the command line.)
+ (you may have to run gcc-config and re-select your gcc now)
+ and the C library, i.e. for glibc-based systems
+ emerge --ask --oneshot sys-libs/glibc
+ or for musl-based systems
+ emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise,
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+ of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+ refer to the *OLD* CHOST value, and remove them.
+ Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+ emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at
+ ${PKGDIR} again:
+ rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+ emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/ia64/17.0/desktop/deprecated b/profiles/default/linux/ia64/17.0/desktop/deprecated
new file mode 100644
index 000000000000..79f71ff58857
--- /dev/null
+++ b/profiles/default/linux/ia64/17.0/desktop/deprecated
@@ -0,0 +1,104 @@
+default/linux/ia64/23.0/split-usr/desktop
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+ your system fully and depclean before proceeding.
+ glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles
+ (other than x32 or musl), then first complete the migration to the
+ corresponding 17.1 profile. Instructions can be found at [3].
+
+3. If you are currently using systemd in a split-usr configuration, then first
+ complete the migration to the corresponding merged-usr profile of the
+ same profile version. Details on how to do this can be found in the news
+ item [4].
+ If you are currently using openrc, migrate to 23.0 first, keeping your disk
+ layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+ remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+ "eselect profile" or by manually setting the profile symlink.
+ Note that old profiles are by default split-usr and the 23.0 profiles by
+ default merged-usr. Do NOT change directory scheme now, since this will
+ mess up your system!
+ Instead, make sure that the new profile has the same property: for example,
+ OLD default/linux/amd64/17.1
+ ==> NEW default/linux/amd64/23.0/split-usr
+ (added "split-usr")
+ OLD default/linux/amd64/17.1/systemd/merged-usr
+ ==> NEW default/linux/amd64/23.0/systemd
+ (removed "merged-usr")
+ A detailed table of the upgrade paths can be found at [5]. Please consult it.
+ In some cases (hppa, x86) the table will tell you to pick between two choices.
+ What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+ rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+ the URI in all configuration such that they point to 23.0 profile binhost
+ directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+ this order, with the same version as already active:
+ emerge --ask --oneshot sys-devel/binutils
+ (you may have to run binutils-config and re-select your binutils now)
+ emerge --ask --oneshot sys-devel/gcc
+ (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do
+ that; instead, abort and try again with --nodeps added to the command line.)
+ (you may have to run gcc-config and re-select your gcc now)
+ and the C library, i.e. for glibc-based systems
+ emerge --ask --oneshot sys-libs/glibc
+ or for musl-based systems
+ emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise,
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+ of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+ refer to the *OLD* CHOST value, and remove them.
+ Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+ emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at
+ ${PKGDIR} again:
+ rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+ emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/ia64/17.0/desktop/gnome/deprecated b/profiles/default/linux/ia64/17.0/desktop/gnome/deprecated
new file mode 100644
index 000000000000..0eb67ae8064e
--- /dev/null
+++ b/profiles/default/linux/ia64/17.0/desktop/gnome/deprecated
@@ -0,0 +1,104 @@
+default/linux/ia64/23.0/split-usr/desktop/gnome
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+ your system fully and depclean before proceeding.
+ glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles
+ (other than x32 or musl), then first complete the migration to the
+ corresponding 17.1 profile. Instructions can be found at [3].
+
+3. If you are currently using systemd in a split-usr configuration, then first
+ complete the migration to the corresponding merged-usr profile of the
+ same profile version. Details on how to do this can be found in the news
+ item [4].
+ If you are currently using openrc, migrate to 23.0 first, keeping your disk
+ layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+ remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+ "eselect profile" or by manually setting the profile symlink.
+ Note that old profiles are by default split-usr and the 23.0 profiles by
+ default merged-usr. Do NOT change directory scheme now, since this will
+ mess up your system!
+ Instead, make sure that the new profile has the same property: for example,
+ OLD default/linux/amd64/17.1
+ ==> NEW default/linux/amd64/23.0/split-usr
+ (added "split-usr")
+ OLD default/linux/amd64/17.1/systemd/merged-usr
+ ==> NEW default/linux/amd64/23.0/systemd
+ (removed "merged-usr")
+ A detailed table of the upgrade paths can be found at [5]. Please consult it.
+ In some cases (hppa, x86) the table will tell you to pick between two choices.
+ What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+ rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+ the URI in all configuration such that they point to 23.0 profile binhost
+ directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+ this order, with the same version as already active:
+ emerge --ask --oneshot sys-devel/binutils
+ (you may have to run binutils-config and re-select your binutils now)
+ emerge --ask --oneshot sys-devel/gcc
+ (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do
+ that; instead, abort and try again with --nodeps added to the command line.)
+ (you may have to run gcc-config and re-select your gcc now)
+ and the C library, i.e. for glibc-based systems
+ emerge --ask --oneshot sys-libs/glibc
+ or for musl-based systems
+ emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise,
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+ of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+ refer to the *OLD* CHOST value, and remove them.
+ Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+ emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at
+ ${PKGDIR} again:
+ rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+ emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/ia64/17.0/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/ia64/17.0/desktop/gnome/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..b367562fd18c
--- /dev/null
+++ b/profiles/default/linux/ia64/17.0/desktop/gnome/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+default/linux/ia64/23.0/desktop/gnome/systemd
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+ your system fully and depclean before proceeding.
+ glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles
+ (other than x32 or musl), then first complete the migration to the
+ corresponding 17.1 profile. Instructions can be found at [3].
+
+3. If you are currently using systemd in a split-usr configuration, then first
+ complete the migration to the corresponding merged-usr profile of the
+ same profile version. Details on how to do this can be found in the news
+ item [4].
+ If you are currently using openrc, migrate to 23.0 first, keeping your disk
+ layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+ remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+ "eselect profile" or by manually setting the profile symlink.
+ Note that old profiles are by default split-usr and the 23.0 profiles by
+ default merged-usr. Do NOT change directory scheme now, since this will
+ mess up your system!
+ Instead, make sure that the new profile has the same property: for example,
+ OLD default/linux/amd64/17.1
+ ==> NEW default/linux/amd64/23.0/split-usr
+ (added "split-usr")
+ OLD default/linux/amd64/17.1/systemd/merged-usr
+ ==> NEW default/linux/amd64/23.0/systemd
+ (removed "merged-usr")
+ A detailed table of the upgrade paths can be found at [5]. Please consult it.
+ In some cases (hppa, x86) the table will tell you to pick between two choices.
+ What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+ rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+ the URI in all configuration such that they point to 23.0 profile binhost
+ directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+ this order, with the same version as already active:
+ emerge --ask --oneshot sys-devel/binutils
+ (you may have to run binutils-config and re-select your binutils now)
+ emerge --ask --oneshot sys-devel/gcc
+ (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do
+ that; instead, abort and try again with --nodeps added to the command line.)
+ (you may have to run gcc-config and re-select your gcc now)
+ and the C library, i.e. for glibc-based systems
+ emerge --ask --oneshot sys-libs/glibc
+ or for musl-based systems
+ emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise,
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+ of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+ refer to the *OLD* CHOST value, and remove them.
+ Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+ emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at
+ ${PKGDIR} again:
+ rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+ emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/ia64/17.0/developer/deprecated b/profiles/default/linux/ia64/17.0/developer/deprecated
new file mode 100644
index 000000000000..db515b7e21ae
--- /dev/null
+++ b/profiles/default/linux/ia64/17.0/developer/deprecated
@@ -0,0 +1,104 @@
+default/linux/ia64/23.0/split-usr
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+ your system fully and depclean before proceeding.
+ glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles
+ (other than x32 or musl), then first complete the migration to the
+ corresponding 17.1 profile. Instructions can be found at [3].
+
+3. If you are currently using systemd in a split-usr configuration, then first
+ complete the migration to the corresponding merged-usr profile of the
+ same profile version. Details on how to do this can be found in the news
+ item [4].
+ If you are currently using openrc, migrate to 23.0 first, keeping your disk
+ layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+ remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+ "eselect profile" or by manually setting the profile symlink.
+ Note that old profiles are by default split-usr and the 23.0 profiles by
+ default merged-usr. Do NOT change directory scheme now, since this will
+ mess up your system!
+ Instead, make sure that the new profile has the same property: for example,
+ OLD default/linux/amd64/17.1
+ ==> NEW default/linux/amd64/23.0/split-usr
+ (added "split-usr")
+ OLD default/linux/amd64/17.1/systemd/merged-usr
+ ==> NEW default/linux/amd64/23.0/systemd
+ (removed "merged-usr")
+ A detailed table of the upgrade paths can be found at [5]. Please consult it.
+ In some cases (hppa, x86) the table will tell you to pick between two choices.
+ What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+ rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+ the URI in all configuration such that they point to 23.0 profile binhost
+ directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+ this order, with the same version as already active:
+ emerge --ask --oneshot sys-devel/binutils
+ (you may have to run binutils-config and re-select your binutils now)
+ emerge --ask --oneshot sys-devel/gcc
+ (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do
+ that; instead, abort and try again with --nodeps added to the command line.)
+ (you may have to run gcc-config and re-select your gcc now)
+ and the C library, i.e. for glibc-based systems
+ emerge --ask --oneshot sys-libs/glibc
+ or for musl-based systems
+ emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise,
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+ of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+ refer to the *OLD* CHOST value, and remove them.
+ Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+ emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at
+ ${PKGDIR} again:
+ rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+ emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/ia64/17.0/systemd/merged-usr/deprecated b/profiles/default/linux/ia64/17.0/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..be9bc4b25696
--- /dev/null
+++ b/profiles/default/linux/ia64/17.0/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+default/linux/ia64/23.0/systemd
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+ your system fully and depclean before proceeding.
+ glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles
+ (other than x32 or musl), then first complete the migration to the
+ corresponding 17.1 profile. Instructions can be found at [3].
+
+3. If you are currently using systemd in a split-usr configuration, then first
+ complete the migration to the corresponding merged-usr profile of the
+ same profile version. Details on how to do this can be found in the news
+ item [4].
+ If you are currently using openrc, migrate to 23.0 first, keeping your disk
+ layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+ remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+ "eselect profile" or by manually setting the profile symlink.
+ Note that old profiles are by default split-usr and the 23.0 profiles by
+ default merged-usr. Do NOT change directory scheme now, since this will
+ mess up your system!
+ Instead, make sure that the new profile has the same property: for example,
+ OLD default/linux/amd64/17.1
+ ==> NEW default/linux/amd64/23.0/split-usr
+ (added "split-usr")
+ OLD default/linux/amd64/17.1/systemd/merged-usr
+ ==> NEW default/linux/amd64/23.0/systemd
+ (removed "merged-usr")
+ A detailed table of the upgrade paths can be found at [5]. Please consult it.
+ In some cases (hppa, x86) the table will tell you to pick between two choices.
+ What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+ rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+ the URI in all configuration such that they point to 23.0 profile binhost
+ directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+ this order, with the same version as already active:
+ emerge --ask --oneshot sys-devel/binutils
+ (you may have to run binutils-config and re-select your binutils now)
+ emerge --ask --oneshot sys-devel/gcc
+ (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do
+ that; instead, abort and try again with --nodeps added to the command line.)
+ (you may have to run gcc-config and re-select your gcc now)
+ and the C library, i.e. for glibc-based systems
+ emerge --ask --oneshot sys-libs/glibc
+ or for musl-based systems
+ emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise,
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+ of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+ refer to the *OLD* CHOST value, and remove them.
+ Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+ emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at
+ ${PKGDIR} again:
+ rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+ emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2024-05-30 22:16 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-05-30 22:16 [gentoo-commits] repo/gentoo:master commit in: profiles/default/linux/ia64/17.0/desktop/gnome/systemd/merged-usr/, Andreas K. Hüttel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox