* [gentoo-commits] repo/gentoo:master commit in: app-emulation/virtualbox-guest-additions/, ...
@ 2023-10-13 9:44 Viorel Munteanu
0 siblings, 0 replies; 6+ messages in thread
From: Viorel Munteanu @ 2023-10-13 9:44 UTC (permalink / raw
To: gentoo-commits
commit: de33d876895296128d4fedbfc6e4a97ccde3e2a2
Author: Viorel Munteanu <ceamac <AT> gentoo <DOT> org>
AuthorDate: Fri Oct 13 09:43:32 2023 +0000
Commit: Viorel Munteanu <ceamac <AT> gentoo <DOT> org>
CommitDate: Fri Oct 13 09:43:32 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=de33d876
app-emulation/virtualbox-guest-additions: fix building with kernel 5.5
Closes: https://bugs.gentoo.org/915665
Signed-off-by: Viorel Munteanu <ceamac <AT> gentoo.org>
...box-guest-additions-7.0.10-fix-kernel-6.5.patch | 35 +++
.../virtualbox-guest-additions-7.0.10-r1.ebuild | 295 +++++++++++++++++++++
2 files changed, 330 insertions(+)
diff --git a/app-emulation/virtualbox-guest-additions/files/virtualbox-guest-additions-7.0.10-fix-kernel-6.5.patch b/app-emulation/virtualbox-guest-additions/files/virtualbox-guest-additions-7.0.10-fix-kernel-6.5.patch
new file mode 100644
index 000000000000..5c537bd7ddb7
--- /dev/null
+++ b/app-emulation/virtualbox-guest-additions/files/virtualbox-guest-additions-7.0.10-fix-kernel-6.5.patch
@@ -0,0 +1,35 @@
+https://www.virtualbox.org/pipermail/vbox-dev/2023-September/010224.html
+
+From: vbox-dev <vbox-dev-bounces at virtualbox.org> on behalf of Larry Finger via vbox-dev <vbox-dev at virtualbox.org>
+Sent: Friday, August 11, 2023 12:23 AM
+To: vbox-dev at virtualbox.org
+Subject: [vbox-dev] Fix for kernel 6.5 build of VB 7.0.10
+
+Hi,
+
+The 7.0.10 release fixed most problems with kernel 6.5. The first exception was
+the problem with extensible arrays in the kernel's vboxsf module that I
+described earlier. There were some hiccups, but that fix should be in kernel
+6.5-rc6.
+
+One other problem showed up in the compilation of vbox_fb.c. The patch for that,
+released under the MIT license, is shown below:
+
+Index: VirtualBox-7.0.10/src/VBox/Additions/linux/drm/vbox_fb.c
+===================================================================
+--- a/src/VBox/Additions/linux/drm/vbox_fb.c
++++ b/src/VBox/Additions/linux/drm/vbox_fb.c
+@@ -196,9 +196,13 @@
+ .owner = THIS_MODULE,
+ .fb_check_var = drm_fb_helper_check_var,
+ .fb_set_par = drm_fb_helper_set_par,
++#if RTLNX_VER_MIN(6, 5, 0)
++ FB_DEFAULT_SYS_OPS,
++#else
+ .fb_fillrect = drm_fb_helper_sys_fillrect,
+ .fb_copyarea = drm_fb_helper_sys_copyarea,
+ .fb_imageblit = drm_fb_helper_sys_imageblit,
++#endif
+ .fb_pan_display = drm_fb_helper_pan_display,
+ .fb_blank = drm_fb_helper_blank,
+ .fb_setcmap = drm_fb_helper_setcmap,
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-7.0.10-r1.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-7.0.10-r1.ebuild
new file mode 100644
index 000000000000..7c0370a2380b
--- /dev/null
+++ b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-7.0.10-r1.ebuild
@@ -0,0 +1,295 @@
+# Copyright 2022-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit edo linux-mod-r1 systemd toolchain-funcs udev
+
+MY_PN="VirtualBox"
+MY_P="${MY_PN}-${PV}"
+
+DESCRIPTION="VirtualBox kernel modules and user-space tools for Gentoo guests"
+HOMEPAGE="https://www.virtualbox.org/"
+SRC_URI="https://download.virtualbox.org/virtualbox/${PV}/${MY_P}.tar.bz2
+ https://gitweb.gentoo.org/proj/virtualbox-patches.git/snapshot/virtualbox-patches-7.0.8.tar.bz2"
+S="${WORKDIR}/${MY_PN}-${PV}"
+
+# Reminder: see the LICENSE related comment in app-emulation/virtualbox-additions ebuild
+LICENSE="GPL-3 LGPL-2.1+ MIT || ( GPL-3 CDDL )"
+SLOT="0/$(ver_cut 1-2)"
+KEYWORDS="~amd64 ~x86"
+IUSE="+dbus gui"
+
+# automount Error: VBoxServiceAutoMountWorker: Group "vboxsf" does not exist
+# TODO: find out what this is, remove comment if obsolete
+
+RDEPEND="
+ acct-group/vboxguest
+ acct-group/vboxsf
+ acct-user/vboxguest
+ sys-libs/pam
+ sys-libs/zlib
+ dbus? ( sys-apps/dbus )
+ gui? (
+ x11-apps/xrandr
+ x11-apps/xrefresh
+ x11-libs/libX11
+ x11-libs/libXext
+ x11-libs/libXmu
+ x11-libs/libXt
+ )
+"
+# some libs here are indirect dependencies, and also needed at compile time.
+# keeping them in DEPEND to avoid warnings from qa-vdb.
+DEPEND="
+ ${RDEPEND}
+ gui? (
+ x11-libs/libICE
+ x11-libs/libSM
+ x11-libs/libXau
+ x11-libs/libXdmcp
+ x11-base/xorg-proto
+ )
+"
+BDEPEND="
+ >=dev-lang/yasm-0.6.2
+ >=dev-util/kbuild-0.1.9998.3127
+ sys-devel/bin86
+ sys-power/iasl
+"
+PDEPEND="
+ gui? ( x11-drivers/xf86-video-vboxvideo )
+"
+
+PATCHES=(
+ "${FILESDIR}"/virtualbox-guest-additions-7.0.8-fix-gcc13.patch
+ "${FILESDIR}"/virtualbox-guest-additions-7.0.10-fix-kernel-6.5.patch # bug #915665
+)
+
+DOCS=() # Don't install the default README file during einstalldocs
+
+VBOX_MOD_SRC_DIR="out/linux.${ARCH}/release/bin/additions/src"
+CONFIG_CHECK="DRM_TTM"
+
+src_prepare() {
+ eapply "${PATCHES[@]}"
+
+ # Remove shipped binaries (kBuild,yasm), see bug #232775
+ rm -r kBuild/bin tools || die
+
+ # Provide kernel sources
+ pushd src/VBox/Additions &>/dev/null || die
+ ebegin "Extracting guest kernel module sources"
+ kmk GuestDrivers-src vboxguest-src vboxsf-src vboxvideo-src &>/dev/null
+ eend $? || die
+ popd &>/dev/null || die
+
+ # PaX fixes (see bug #298988)
+ eapply -d "${VBOX_MOD_SRC_DIR}" -- "${FILESDIR}"/vboxguest-6.1.36-log-use-c99.patch
+
+ # Disable things unused or splitted into separate ebuilds
+ cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
+ if ! use gui; then
+ echo "VBOX_WITH_X11_ADDITIONS :=" >> LocalConfig.kmk || die
+ fi
+
+ # Remove pointless GCC version check
+ sed -e '/ check_gcc$/d' -i configure || die
+
+ # Respect LDFLAGS (bug #759100)
+ sed -i -e '/TEMPLATE_VBoxR3Exe_LDFLAGS.linux[ ]*=/ s/$/ $(CCLDFLAGS)/' Config.kmk || die
+
+ eapply "${WORKDIR}/virtualbox-patches-7.0.8/patches"
+ eapply_user
+}
+
+src_configure() {
+ tc-export AR CC CXX LD RANLIB
+
+ # Build the user-space tools, warnings are harmless
+ local myconf=(
+ --with-gcc="$(tc-getCC)"
+ --with-g++="$(tc-getCXX)"
+
+ --nofatal
+ --disable-xpcom
+ --disable-sdl-ttf
+ --disable-pulse
+ --disable-alsa
+ $(usev !dbus --disable-dbus)
+ --target-arch=${ARCH}
+ --with-linux="${KV_OUT_DIR}"
+ --build-headless
+ )
+
+ # bug #843437
+ # Respect LDFLAGS (bug #759100)
+ # Cannot use LDFLAGS here because they also get passed to $(LD)
+ cat >> LocalConfig.kmk <<-EOF || die
+ CFLAGS=${CFLAGS}
+ CXXFLAGS=${CXXFLAGS}
+ CCLDFLAGS=${LDFLAGS}
+ EOF
+
+ edo ./configure "${myconf[@]}"
+}
+
+src_compile() {
+ source ./env.sh || die
+
+ # Force kBuild to respect C[XX]FLAGS and MAKEOPTS (bug #178529)
+ MAKEJOBS=$(grep -Eo '(\-j|\-\-jobs)(=?|[[:space:]]*)[[:digit:]]+' <<< ${MAKEOPTS})
+ MAKELOAD=$(grep -Eo '(\-l|\-\-load-average)(=?|[[:space:]]*)[[:digit:]]+' <<< ${MAKEOPTS})
+ MAKEOPTS="${MAKEJOBS} ${MAKELOAD}"
+
+ local myemakeargs=(
+ VBOX_BUILD_PUBLISHER=_Gentoo
+ VBOX_ONLY_ADDITIONS=1
+
+ KBUILD_VERBOSE=2
+
+ AS="$(tc-getCC)"
+ CC="$(tc-getCC)"
+ CXX="$(tc-getCXX)"
+ LD="$(tc-getCC)"
+
+ TOOL_GCC3_CC="$(tc-getCC)"
+ TOOL_GCC3_CXX="$(tc-getCXX)"
+ TOOL_GCC3_LD="$(tc-getCC)"
+ TOOL_GCC3_AS="$(tc-getCC)"
+ TOOL_GCC3_AR="$(tc-getAR)"
+ TOOL_GCC3_OBJCOPY="$(tc-getOBJCOPY)"
+ #TOOL_GCC3_LD_SYSMOD="$(tc-getCC)"
+
+ TOOL_GXX3_CC="$(tc-getCC)"
+ TOOL_GXX3_CXX="$(tc-getCXX)"
+ TOOL_GXX3_LD="$(tc-getCXX)"
+ TOOL_GXX3_AS="$(tc-getCXX)"
+ TOOL_GXX3_AR="$(tc-getAR)"
+ TOOL_GXX3_OBJCOPY="$(tc-getOBJCOPY)"
+ #TOOL_GXX3_LD_SYSMOD="$(tc-getCXX)"
+
+ TOOL_GCC3_CFLAGS="${CFLAGS}"
+ TOOL_GCC3_CXXFLAGS="${CXXFLAGS}"
+ VBOX_GCC_OPT="${CXXFLAGS}"
+ VBOX_NM="$(tc-getNM)"
+ TOOL_YASM_AS=yasm
+ )
+
+ MAKE="kmk" emake "${myemakeargs[@]}"
+
+ # Now creating the kernel modules. We must do this _after_
+ # we compiled the user-space tools as we need two of the
+ # automatically generated header files. (>=3.2.0)
+ # Move this here for bug 836037
+ local modargs=( KERN_DIR="${KV_OUT_DIR}" KERN_VER="${KV_FULL}" )
+ local modlist=( vboxguest vboxsf )
+ use gui && modlist+=( vboxvideo )
+ modlist=( "${modlist[@]/%/=misc:${VBOX_MOD_SRC_DIR}}" )
+ linux-mod-r1_src_compile
+}
+
+src_install() {
+ linux-mod-r1_src_install
+
+ insinto /etc/modprobe.d # 485996
+ newins - vboxsf.conf <<-EOF
+ # modprobe.d configuration file for VBOXSF
+
+ # Internal Aliases - Do not edit
+ # ------------------------------
+ alias fs-vboxsf vboxsf
+ EOF
+
+ cd out/linux.${ARCH}/release/bin/additions || die
+
+ insinto /sbin
+ newins mount.vboxsf mount.vboxsf
+ fperms 4755 /sbin/mount.vboxsf
+
+ if use dbus; then
+ newinitd "${FILESDIR}"/${PN}-8.initd-r1 ${PN}
+ else
+ newinitd <(sed 's/ dbus\>//' "${FILESDIR}"/${PN}-8.initd-r1) ${PN}
+ fi
+
+ insinto /usr/sbin/
+ newins VBoxService vboxguest-service
+ fperms 0755 /usr/sbin/vboxguest-service
+
+ insinto /usr/bin
+ doins VBoxControl
+ fperms 0755 /usr/bin/VBoxControl
+
+ # VBoxClient user service and xrandr wrapper
+ if use gui ; then
+ doins VBoxClient
+ fperms 0755 /usr/bin/VBoxClient
+ doins VBoxDRMClient
+ fperms 4755 /usr/bin/VBoxDRMClient
+
+ pushd "${S}"/src/VBox/Additions/x11/Installer &>/dev/null || die
+ newins 98vboxadd-xclient VBoxClient-all
+ fperms 0755 /usr/bin/VBoxClient-all
+ popd &>/dev/null || die
+ fi
+
+ # udev rule for vboxdrv
+ local udev_rules_dir="/lib/udev/rules.d"
+ dodir ${udev_rules_dir}
+ echo 'KERNEL=="vboxguest", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+ echo 'KERNEL=="vboxuser", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+
+ # VBoxClient autostart file
+ insinto /etc/xdg/autostart
+ doins "${FILESDIR}"/vboxclient.desktop
+
+ # sample xorg.conf
+ dodoc "${FILESDIR}"/xorg.conf.vbox
+ docompress -x "${ED}"/usr/share/doc/${PF}/xorg.conf.vbox
+
+ systemd_dounit "${FILESDIR}/${PN}.service"
+}
+
+pkg_postinst() {
+ linux-mod-r1_pkg_postinst
+ udev_reload
+ if ! use gui ; then
+ elog "use flag gui is off, enable it to install the"
+ elog "X Window System video driver."
+ fi
+ elog ""
+ elog "Please add users to the \"vboxguest\" group so they can"
+ elog "benefit from seamless mode, auto-resize and clipboard."
+ elog ""
+ elog "The vboxsf group has been added to make automount services work."
+ elog "These services are part of the shared folders support."
+ elog ""
+ elog "Please add:"
+ elog "/etc/init.d/${PN}"
+ elog "to the default runlevel in order to start"
+ elog "needed services."
+ elog "To use the VirtualBox X driver, use the following"
+ elog "file as your /etc/X11/xorg.conf:"
+ elog " /usr/share/doc/${PF}/xorg.conf.vbox"
+ elog ""
+ elog "An autostart .desktop file has been installed to start"
+ elog "VBoxClient in desktop sessions."
+ elog ""
+ elog "You can mount shared folders with:"
+ elog " mount -t vboxsf <shared_folder_name> <mount_point>"
+ elog ""
+ elog "Warning:"
+ elog "this ebuild is only needed if you are running gentoo"
+ elog "inside a VirtualBox Virtual Machine, you don't need"
+ elog "it to run VirtualBox itself."
+ elog ""
+}
+
+pkg_postrm() {
+ udev_reload
+}
^ permalink raw reply related [flat|nested] 6+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: app-emulation/virtualbox-guest-additions/, ...
@ 2022-09-05 12:39 Joonas Niilola
0 siblings, 0 replies; 6+ messages in thread
From: Joonas Niilola @ 2022-09-05 12:39 UTC (permalink / raw
To: gentoo-commits
commit: 238e4c6183963335f67295976d005b675be6968d
Author: Viorel Munteanu <ceamac.paragon <AT> gmail <DOT> com>
AuthorDate: Thu Sep 1 08:03:13 2022 +0000
Commit: Joonas Niilola <juippis <AT> gentoo <DOT> org>
CommitDate: Mon Sep 5 12:39:17 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=238e4c61
app-emulation/virtualbox-guest-additions: drop 6.1.32-r1, 6.1.34-r1, 6.1.34-r2, 6.1.34-r3
Signed-off-by: Viorel Munteanu <ceamac.paragon <AT> gmail.com>
Signed-off-by: Joonas Niilola <juippis <AT> gentoo.org>
app-emulation/virtualbox-guest-additions/Manifest | 3 -
.../files/vboxguest-6.0.6-log-use-c99.patch | 13 -
.../virtualbox-guest-additions-6.1.32-r1.ebuild | 224 -----------------
.../virtualbox-guest-additions-6.1.34-r1.ebuild | 224 -----------------
.../virtualbox-guest-additions-6.1.34-r2.ebuild | 272 --------------------
.../virtualbox-guest-additions-6.1.34-r3.ebuild | 280 ---------------------
6 files changed, 1016 deletions(-)
diff --git a/app-emulation/virtualbox-guest-additions/Manifest b/app-emulation/virtualbox-guest-additions/Manifest
index f0e2964cc09c..d98f18d2ee2d 100644
--- a/app-emulation/virtualbox-guest-additions/Manifest
+++ b/app-emulation/virtualbox-guest-additions/Manifest
@@ -1,6 +1,3 @@
-DIST VirtualBox-6.1.32.tar.bz2 165758238 BLAKE2B 24873d7cc8bd306ea3552fe75379fbe7be767c85406042344eb047ed31184c3357aea07dda5e15c275f5036ae63106ef1d2e6524b143bc645a6b5ba0016f1391 SHA512 8bf7af6b8b4d3ba90f0e91589cf26400648436eb9da6d31c1a760460bfe5eb7311ac3220b4c9a98ac50e559641d3d5f559134be65288821038255de1c2c7ce1e
-DIST VirtualBox-6.1.34.tar.bz2 165761216 BLAKE2B d3c8f7d3d6f408e4c4275c2b2815e92819c871359501ec4fa7212bf7cdc852613e2e4703d8650371097a5bc805efa04ea75bb03ab83d24a869a677555f6e22d5 SHA512 46d63a9fd9df76af654af59fab5cf555858bc2c4b5dc34e2378d85ae784e6380b6def4aab06909a9b5e114a7297269f90cfb2c3d8d6529b423d703afbad18c64
DIST VirtualBox-6.1.36.tar.bz2 165685382 BLAKE2B 98dbb06450b9df650cb72493bcdea4b88fa9dd21f76d723fdc0bb2c1ab8266f67e972a7222dc9b5bd0d43754911710664bddace753995be025cf6bcc05a24ae5 SHA512 cc3b984a7da40c9bf14831808a2bc2bf7bf6821e53c25fa11cb4b4275feb1d4b0cb4a47d8a360b90c89e5a4038481efe8fe28ee22996dbefb6446761e88a8dec
DIST VirtualBox-6.1.38.tar.bz2 165761175 BLAKE2B decda6e7a595f79e6ace6f8f6b8a7829223ac1422c3d280b6287a40ef942e773ad473f4fa4640a76f8fb825ebd8561c646f1b3d87922b1af55c138298b4c8f4f SHA512 7a4f2dc80e3251b1da6d29d3c6f6b802527decc70497b1a1d1008c0ab3109c2039d131c587d6ec4786aea619546757655337c2ec3456243336ca13c6f6748116
-DIST virtualbox-6.1.12-patches-01.tar.xz 2528 BLAKE2B a5d7cde0daea41bee2e40e46569c725769927a31865d99d13b8b13c4903e59b4097f85da15dc592b9c7e8baf8ff805397af827620f107ba09a468b4d1198ecab SHA512 f71d10a9fbce99c3f631ef30bcfa9d0e017e702ac509541b039e08ccbcd024beb93fde09c43d90af5d9d28f6842a7947f20e7950d3897da3e6d57859657e1123
DIST virtualbox-patches-6.1.36.tar.bz2 2733 BLAKE2B dcfebfeca4873d382441515d48b4dfee9343bc7c83ea3cbb5002dbf7975143a79fae9a701b67dc35505e9ca03ff1b6293cb7c3279c4fdfda8ad21ba5fb9b7e87 SHA512 1bed5cdefbf8e7c4b0d9092ba4961ecf2262f27f35c71a91ef6f2e8fe8a1d92ed74f06bafbf58d70ba7165d933997f58073f4d4f4051e3ba5c0339b729066f57
diff --git a/app-emulation/virtualbox-guest-additions/files/vboxguest-6.0.6-log-use-c99.patch b/app-emulation/virtualbox-guest-additions/files/vboxguest-6.0.6-log-use-c99.patch
deleted file mode 100644
index baae66fb081f..000000000000
--- a/app-emulation/virtualbox-guest-additions/files/vboxguest-6.0.6-log-use-c99.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-https://bugs.gentoo.org/298988
-
---- a/vboxguest/Makefile
-+++ b/vboxguest/Makefile
-@@ -136,7 +136,7 @@
- IN_MODULE \
- RT_WITH_VBOX \
- VBGL_VBOXGUEST \
-- VBOX_WITH_HGCM
-+ VBOX_WITH_HGCM LOG_USE_C99
- ifeq ($(BUILD_TARGET_ARCH),amd64)
- VBOXMOD_DEFS += VBOX_WITH_64_BITS_GUESTS
- endif
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.32-r1.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.32-r1.ebuild
deleted file mode 100644
index 0fe9fe142731..000000000000
--- a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.32-r1.ebuild
+++ /dev/null
@@ -1,224 +0,0 @@
-# Copyright 2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit linux-mod systemd toolchain-funcs udev
-
-MY_PN="VirtualBox"
-MY_PV="${PV/beta/BETA}"
-MY_PV="${MY_PV/rc/RC}"
-MY_P="${MY_PN}-${MY_PV}"
-[[ "${PV}" == *a ]] && DIR_PV="$(ver_cut 1-3)"
-
-DESCRIPTION="VirtualBox kernel modules and user-space tools for Gentoo guests"
-HOMEPAGE="https://www.virtualbox.org/"
-SRC_URI="https://download.virtualbox.org/virtualbox/${DIR_PV:-${MY_PV}}/${MY_P}.tar.bz2
- https://dev.gentoo.org/~polynomial-c/virtualbox/patchsets/virtualbox-6.1.12-patches-01.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0/$(ver_cut 1-2)"
-[[ "${PV}" == *_beta* ]] || [[ "${PV}" == *_rc* ]] || \
-KEYWORDS="amd64 x86"
-IUSE="X"
-
-# automount Error: VBoxServiceAutoMountWorker: Group "vboxsf" does not exist
-RDEPEND="
- acct-group/vboxguest
- acct-group/vboxsf
- acct-user/vboxguest
- X? ( x11-apps/xrandr
- x11-apps/xrefresh
- x11-libs/libXmu
- x11-libs/libX11
- x11-libs/libXt
- x11-libs/libXext
- x11-libs/libXau
- x11-libs/libXdmcp
- x11-libs/libSM
- x11-libs/libICE )
- sys-apps/dbus
-"
-DEPEND="
- ${RDEPEND}
- >=dev-util/kbuild-0.1.9998.3127
- >=dev-lang/yasm-0.6.2
- sys-devel/bin86
- sys-libs/pam
- sys-power/iasl
- x11-base/xorg-proto
-"
-PDEPEND="
- X? ( x11-drivers/xf86-video-vboxvideo )
-"
-BUILD_TARGETS="all"
-BUILD_TARGET_ARCH="${ARCH}"
-
-S="${WORKDIR}/${MY_PN}-${DIR_PV:-${PV}}"
-VBOX_MOD_SRC_DIR="${S}/out/linux.${ARCH}/release/bin/additions/src"
-
-pkg_setup() {
- export DISTCC_DISABLE=1 #674256
- MODULE_NAMES="vboxguest(misc:${VBOX_MOD_SRC_DIR}/vboxguest:${VBOX_MOD_SRC_DIR}/vboxguest)
- vboxsf(misc:${VBOX_MOD_SRC_DIR}/vboxsf:${VBOX_MOD_SRC_DIR}/vboxsf)"
- use X && MODULE_NAMES+=" vboxvideo(misc:${VBOX_MOD_SRC_DIR}/vboxvideo::${VBOX_MOD_SRC_DIR}/vboxvideo)"
-
- linux-mod_pkg_setup
- BUILD_PARAMS="KERN_DIR=/lib/modules/${KV_FULL}/build KERNOUT=${KV_OUT_DIR} KBUILD_EXTRA_SYMBOLS=${S}/Module.symvers"
-}
-
-src_prepare() {
- # Remove shipped binaries (kBuild,yasm), see bug #232775
- rm -r kBuild/bin tools || die
-
- # Provide kernel sources
- pushd src/VBox/Additions &>/dev/null || die
- ebegin "Extracting guest kernel module sources"
- kmk GuestDrivers-src vboxguest-src vboxsf-src vboxvideo-src &>/dev/null
- eend $? || die
- popd &>/dev/null || die
-
- # PaX fixes (see bug #298988)
- pushd "${VBOX_MOD_SRC_DIR}" &>/dev/null || die
- eapply "${FILESDIR}"/vboxguest-6.0.6-log-use-c99.patch
- popd &>/dev/null || die
-
- # Disable things unused or splitted into separate ebuilds
- cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
- use X || echo "VBOX_WITH_X11_ADDITIONS :=" >> LocalConfig.kmk
-
- # Remove pointless GCC version check
- sed -e '/^check_gcc$/d' -i configure || die
-
- eapply "${WORKDIR}/patches"
-
- eapply_user
-}
-
-src_configure() {
- # build the user-space tools, warnings are harmless
- local cmd=(
- ./configure
- --nofatal
- --disable-xpcom
- --disable-sdl-ttf
- --disable-pulse
- --disable-alsa
- --with-gcc="$(tc-getCC)"
- --with-g++="$(tc-getCXX)"
- --target-arch=${ARCH}
- --with-linux="${KV_OUT_DIR}"
- --build-headless
- )
- echo "${cmd[@]}"
- "${cmd[@]}" || die "configure failed"
- source ./env.sh
- export VBOX_GCC_OPT="${CFLAGS} ${CPPFLAGS}"
-}
-
-src_compile() {
- MAKE="kmk" emake \
- VBOX_BUILD_PUBLISHER=_Gentoo \
- TOOL_GXX3_CC="$(tc-getCC)" TOOL_GXX3_CXX="$(tc-getCXX)" \
- TOOL_GXX3_LD="$(tc-getCXX)" VBOX_GCC_OPT="${CXXFLAGS}" \
- TOOL_YASM_AS=yasm \
- VBOX_ONLY_ADDITIONS=1 \
- KBUILD_VERBOSE=2
-
- # Now creating the kernel modules. We must do this _after_
- # we compiled the user-space tools as we need two of the
- # automatically generated header files. (>=3.2.0)
- linux-mod_src_compile
-}
-
-src_install() {
- linux-mod_src_install
-
- cd "${S}"/out/linux.${ARCH}/release/bin/additions || die
-
- insinto /sbin
- newins mount.vboxsf mount.vboxsf
- fperms 4755 /sbin/mount.vboxsf
-
- newinitd "${FILESDIR}"/${PN}-8.initd-r1 ${PN}
-
- insinto /usr/sbin/
- newins VBoxService vboxguest-service
- fperms 0755 /usr/sbin/vboxguest-service
-
- insinto /usr/bin
- doins VBoxControl
- fperms 0755 /usr/bin/VBoxControl
-
- # VBoxClient user service and xrandr wrapper
- if use X ; then
- doins VBoxClient
- fperms 0755 /usr/bin/VBoxClient
- doins VBoxDRMClient
- fperms 4755 /usr/bin/VBoxDRMClient
-
- pushd "${S}"/src/VBox/Additions/x11/Installer &>/dev/null \
- || die
- newins 98vboxadd-xclient VBoxClient-all
- fperms 0755 /usr/bin/VBoxClient-all
- popd &>/dev/null || die
- fi
-
- # udev rule for vboxdrv
- local udev_rules_dir="/lib/udev/rules.d"
- dodir ${udev_rules_dir}
- echo 'KERNEL=="vboxguest", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
- >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
- || die
- echo 'KERNEL=="vboxuser", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
- >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
- || die
-
- # VBoxClient autostart file
- insinto /etc/xdg/autostart
- doins "${FILESDIR}"/vboxclient.desktop
-
- # sample xorg.conf
- dodoc "${FILESDIR}"/xorg.conf.vbox
- docompress -x "${ED}"/usr/share/doc/${PF}/xorg.conf.vbox
-
- systemd_dounit "${FILESDIR}/${PN}.service"
-}
-
-pkg_postinst() {
- linux-mod_pkg_postinst
- udev_reload
- if ! use X ; then
- elog "use flag X is off, enable it to install the"
- elog "X Window System video driver."
- fi
- elog ""
- elog "Please add users to the \"vboxguest\" group so they can"
- elog "benefit from seamless mode, auto-resize and clipboard."
- elog ""
- elog "The vboxsf group has been added to make automount services work."
- elog "These services are part of the shared folders support."
- elog ""
- elog "Please add:"
- elog "/etc/init.d/${PN}"
- elog "to the default runlevel in order to start"
- elog "needed services."
- elog "To use the VirtualBox X driver, use the following"
- elog "file as your /etc/X11/xorg.conf:"
- elog " /usr/share/doc/${PF}/xorg.conf.vbox"
- elog ""
- elog "Also make sure you use the Mesa library for OpenGL:"
- elog " eselect opengl set xorg-x11"
- elog ""
- elog "An autostart .desktop file has been installed to start"
- elog "VBoxClient in desktop sessions."
- elog ""
- elog "You can mount shared folders with:"
- elog " mount -t vboxsf <shared_folder_name> <mount_point>"
- elog ""
- elog "Warning:"
- elog "this ebuild is only needed if you are running gentoo"
- elog "inside a VirtualBox Virtual Machine, you don't need"
- elog "it to run VirtualBox itself."
- elog ""
-}
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.34-r1.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.34-r1.ebuild
deleted file mode 100644
index ba2e1c3daac9..000000000000
--- a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.34-r1.ebuild
+++ /dev/null
@@ -1,224 +0,0 @@
-# Copyright 2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit linux-mod systemd toolchain-funcs udev
-
-MY_PN="VirtualBox"
-MY_PV="${PV/beta/BETA}"
-MY_PV="${MY_PV/rc/RC}"
-MY_P="${MY_PN}-${MY_PV}"
-[[ "${PV}" == *a ]] && DIR_PV="$(ver_cut 1-3)"
-
-DESCRIPTION="VirtualBox kernel modules and user-space tools for Gentoo guests"
-HOMEPAGE="https://www.virtualbox.org/"
-SRC_URI="https://download.virtualbox.org/virtualbox/${DIR_PV:-${MY_PV}}/${MY_P}.tar.bz2
- https://dev.gentoo.org/~polynomial-c/virtualbox/patchsets/virtualbox-6.1.12-patches-01.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0/$(ver_cut 1-2)"
-[[ "${PV}" == *_beta* ]] || [[ "${PV}" == *_rc* ]] || \
-KEYWORDS="~amd64 ~x86"
-IUSE="X"
-
-# automount Error: VBoxServiceAutoMountWorker: Group "vboxsf" does not exist
-RDEPEND="
- acct-group/vboxguest
- acct-group/vboxsf
- acct-user/vboxguest
- X? ( x11-apps/xrandr
- x11-apps/xrefresh
- x11-libs/libXmu
- x11-libs/libX11
- x11-libs/libXt
- x11-libs/libXext
- x11-libs/libXau
- x11-libs/libXdmcp
- x11-libs/libSM
- x11-libs/libICE )
- sys-apps/dbus
-"
-DEPEND="
- ${RDEPEND}
- >=dev-util/kbuild-0.1.9998.3127
- >=dev-lang/yasm-0.6.2
- sys-devel/bin86
- sys-libs/pam
- sys-power/iasl
- x11-base/xorg-proto
-"
-PDEPEND="
- X? ( x11-drivers/xf86-video-vboxvideo )
-"
-BUILD_TARGETS="all"
-BUILD_TARGET_ARCH="${ARCH}"
-
-S="${WORKDIR}/${MY_PN}-${DIR_PV:-${PV}}"
-VBOX_MOD_SRC_DIR="${S}/out/linux.${ARCH}/release/bin/additions/src"
-
-pkg_setup() {
- export DISTCC_DISABLE=1 #674256
- MODULE_NAMES="vboxguest(misc:${VBOX_MOD_SRC_DIR}/vboxguest:${VBOX_MOD_SRC_DIR}/vboxguest)
- vboxsf(misc:${VBOX_MOD_SRC_DIR}/vboxsf:${VBOX_MOD_SRC_DIR}/vboxsf)"
- use X && MODULE_NAMES+=" vboxvideo(misc:${VBOX_MOD_SRC_DIR}/vboxvideo::${VBOX_MOD_SRC_DIR}/vboxvideo)"
-
- linux-mod_pkg_setup
- BUILD_PARAMS="KERN_DIR=/lib/modules/${KV_FULL}/build KERNOUT=${KV_OUT_DIR} KBUILD_EXTRA_SYMBOLS=${S}/Module.symvers"
-}
-
-src_prepare() {
- # Remove shipped binaries (kBuild,yasm), see bug #232775
- rm -r kBuild/bin tools || die
-
- # Provide kernel sources
- pushd src/VBox/Additions &>/dev/null || die
- ebegin "Extracting guest kernel module sources"
- kmk GuestDrivers-src vboxguest-src vboxsf-src vboxvideo-src &>/dev/null
- eend $? || die
- popd &>/dev/null || die
-
- # PaX fixes (see bug #298988)
- pushd "${VBOX_MOD_SRC_DIR}" &>/dev/null || die
- eapply "${FILESDIR}"/vboxguest-6.0.6-log-use-c99.patch
- popd &>/dev/null || die
-
- # Disable things unused or splitted into separate ebuilds
- cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
- use X || echo "VBOX_WITH_X11_ADDITIONS :=" >> LocalConfig.kmk
-
- # Remove pointless GCC version check
- sed -e '/^check_gcc$/d' -i configure || die
-
- eapply "${WORKDIR}/patches"
-
- eapply_user
-}
-
-src_configure() {
- # build the user-space tools, warnings are harmless
- local cmd=(
- ./configure
- --nofatal
- --disable-xpcom
- --disable-sdl-ttf
- --disable-pulse
- --disable-alsa
- --with-gcc="$(tc-getCC)"
- --with-g++="$(tc-getCXX)"
- --target-arch=${ARCH}
- --with-linux="${KV_OUT_DIR}"
- --build-headless
- )
- echo "${cmd[@]}"
- "${cmd[@]}" || die "configure failed"
- source ./env.sh
- export VBOX_GCC_OPT="${CFLAGS} ${CPPFLAGS}"
-}
-
-src_compile() {
- MAKE="kmk" emake \
- VBOX_BUILD_PUBLISHER=_Gentoo \
- TOOL_GXX3_CC="$(tc-getCC)" TOOL_GXX3_CXX="$(tc-getCXX)" \
- TOOL_GXX3_LD="$(tc-getCXX)" VBOX_GCC_OPT="${CXXFLAGS}" \
- TOOL_YASM_AS=yasm \
- VBOX_ONLY_ADDITIONS=1 \
- KBUILD_VERBOSE=2
-
- # Now creating the kernel modules. We must do this _after_
- # we compiled the user-space tools as we need two of the
- # automatically generated header files. (>=3.2.0)
- linux-mod_src_compile
-}
-
-src_install() {
- linux-mod_src_install
-
- cd "${S}"/out/linux.${ARCH}/release/bin/additions || die
-
- insinto /sbin
- newins mount.vboxsf mount.vboxsf
- fperms 4755 /sbin/mount.vboxsf
-
- newinitd "${FILESDIR}"/${PN}-8.initd-r1 ${PN}
-
- insinto /usr/sbin/
- newins VBoxService vboxguest-service
- fperms 0755 /usr/sbin/vboxguest-service
-
- insinto /usr/bin
- doins VBoxControl
- fperms 0755 /usr/bin/VBoxControl
-
- # VBoxClient user service and xrandr wrapper
- if use X ; then
- doins VBoxClient
- fperms 0755 /usr/bin/VBoxClient
- doins VBoxDRMClient
- fperms 4755 /usr/bin/VBoxDRMClient
-
- pushd "${S}"/src/VBox/Additions/x11/Installer &>/dev/null \
- || die
- newins 98vboxadd-xclient VBoxClient-all
- fperms 0755 /usr/bin/VBoxClient-all
- popd &>/dev/null || die
- fi
-
- # udev rule for vboxdrv
- local udev_rules_dir="/lib/udev/rules.d"
- dodir ${udev_rules_dir}
- echo 'KERNEL=="vboxguest", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
- >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
- || die
- echo 'KERNEL=="vboxuser", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
- >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
- || die
-
- # VBoxClient autostart file
- insinto /etc/xdg/autostart
- doins "${FILESDIR}"/vboxclient.desktop
-
- # sample xorg.conf
- dodoc "${FILESDIR}"/xorg.conf.vbox
- docompress -x "${ED}"/usr/share/doc/${PF}/xorg.conf.vbox
-
- systemd_dounit "${FILESDIR}/${PN}.service"
-}
-
-pkg_postinst() {
- linux-mod_pkg_postinst
- udev_reload
- if ! use X ; then
- elog "use flag X is off, enable it to install the"
- elog "X Window System video driver."
- fi
- elog ""
- elog "Please add users to the \"vboxguest\" group so they can"
- elog "benefit from seamless mode, auto-resize and clipboard."
- elog ""
- elog "The vboxsf group has been added to make automount services work."
- elog "These services are part of the shared folders support."
- elog ""
- elog "Please add:"
- elog "/etc/init.d/${PN}"
- elog "to the default runlevel in order to start"
- elog "needed services."
- elog "To use the VirtualBox X driver, use the following"
- elog "file as your /etc/X11/xorg.conf:"
- elog " /usr/share/doc/${PF}/xorg.conf.vbox"
- elog ""
- elog "Also make sure you use the Mesa library for OpenGL:"
- elog " eselect opengl set xorg-x11"
- elog ""
- elog "An autostart .desktop file has been installed to start"
- elog "VBoxClient in desktop sessions."
- elog ""
- elog "You can mount shared folders with:"
- elog " mount -t vboxsf <shared_folder_name> <mount_point>"
- elog ""
- elog "Warning:"
- elog "this ebuild is only needed if you are running gentoo"
- elog "inside a VirtualBox Virtual Machine, you don't need"
- elog "it to run VirtualBox itself."
- elog ""
-}
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.34-r2.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.34-r2.ebuild
deleted file mode 100644
index 76a478a3ee24..000000000000
--- a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.34-r2.ebuild
+++ /dev/null
@@ -1,272 +0,0 @@
-# Copyright 2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit edo linux-mod systemd toolchain-funcs udev
-
-MY_PN="VirtualBox"
-MY_PV="${PV/beta/BETA}"
-MY_PV="${MY_PV/rc/RC}"
-MY_P="${MY_PN}-${MY_PV}"
-[[ "${PV}" == *a ]] && DIR_PV="$(ver_cut 1-3)"
-
-DESCRIPTION="VirtualBox kernel modules and user-space tools for Gentoo guests"
-HOMEPAGE="https://www.virtualbox.org/"
-SRC_URI="https://download.virtualbox.org/virtualbox/${DIR_PV:-${MY_PV}}/${MY_P}.tar.bz2
- https://dev.gentoo.org/~polynomial-c/virtualbox/patchsets/virtualbox-6.1.12-patches-01.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0/$(ver_cut 1-2)"
-[[ "${PV}" == *_beta* ]] || [[ "${PV}" == *_rc* ]] || \
-KEYWORDS="~amd64 ~x86"
-IUSE="X"
-
-# automount Error: VBoxServiceAutoMountWorker: Group "vboxsf" does not exist
-RDEPEND="
- acct-group/vboxguest
- acct-group/vboxsf
- acct-user/vboxguest
- X? ( x11-apps/xrandr
- x11-apps/xrefresh
- x11-libs/libXmu
- x11-libs/libX11
- x11-libs/libXt
- x11-libs/libXext
- x11-libs/libXau
- x11-libs/libXdmcp
- x11-libs/libSM
- x11-libs/libICE )
- sys-apps/dbus
-"
-DEPEND="
- ${RDEPEND}
- >=dev-util/kbuild-0.1.9998.3127
- >=dev-lang/yasm-0.6.2
- sys-devel/bin86
- sys-libs/pam
- sys-power/iasl
- x11-base/xorg-proto
-"
-PDEPEND="
- X? ( x11-drivers/xf86-video-vboxvideo )
-"
-BUILD_TARGETS="all"
-BUILD_TARGET_ARCH="${ARCH}"
-
-S="${WORKDIR}/${MY_PN}-${DIR_PV:-${PV}}"
-VBOX_MOD_SRC_DIR="${S}/out/linux.${ARCH}/release/bin/additions/src"
-
-pkg_setup() {
- export DISTCC_DISABLE=1 #674256
- MODULE_NAMES="vboxguest(misc:${VBOX_MOD_SRC_DIR}/vboxguest:${VBOX_MOD_SRC_DIR}/vboxguest)
- vboxsf(misc:${VBOX_MOD_SRC_DIR}/vboxsf:${VBOX_MOD_SRC_DIR}/vboxsf)"
- use X && MODULE_NAMES+=" vboxvideo(misc:${VBOX_MOD_SRC_DIR}/vboxvideo::${VBOX_MOD_SRC_DIR}/vboxvideo)"
-
- linux-mod_pkg_setup
- BUILD_PARAMS="KERN_DIR=/lib/modules/${KV_FULL}/build KERNOUT=${KV_OUT_DIR} KBUILD_EXTRA_SYMBOLS=${S}/Module.symvers"
-}
-
-src_prepare() {
- # Remove shipped binaries (kBuild,yasm), see bug #232775
- rm -r kBuild/bin tools || die
-
- # Provide kernel sources
- pushd src/VBox/Additions &>/dev/null || die
- ebegin "Extracting guest kernel module sources"
- kmk GuestDrivers-src vboxguest-src vboxsf-src vboxvideo-src &>/dev/null
- eend $? || die
- popd &>/dev/null || die
-
- # PaX fixes (see bug #298988)
- pushd "${VBOX_MOD_SRC_DIR}" &>/dev/null || die
- eapply "${FILESDIR}"/vboxguest-6.0.6-log-use-c99.patch
- popd &>/dev/null || die
-
- # Disable things unused or splitted into separate ebuilds
- cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
- use X || echo "VBOX_WITH_X11_ADDITIONS :=" >> LocalConfig.kmk
-
- # Remove pointless GCC version check
- sed -e '/^check_gcc$/d' -i configure || die
-
- # Respect LDFLAGS
- #sed -e "s@_LDFLAGS\.${ARCH}*.*=@& ${LDFLAGS}@g" \
- # -i Config.kmk src/libs/xpcom18a4/Config.kmk || die
-
- # Do not use hard-coded ld (related to bug #488176)
- #sed -e '/QUIET)ld /s@ld @$(LD) @' \
- # -i src/VBox/Devices/PC/ipxe/Makefile.kmk || die
-
- eapply "${WORKDIR}/patches"
- eapply_user
-}
-
-src_configure() {
- tc-export AR CC CXX LD RANLIB
-
- # Build the user-space tools, warnings are harmless
- local myconf=(
- --with-gcc="$(tc-getCC)"
- --with-g++="$(tc-getCXX)"
-
- --nofatal
- --disable-xpcom
- --disable-sdl-ttf
- --disable-pulse
- --disable-alsa
- --target-arch=${ARCH}
- --with-linux="${KV_OUT_DIR}"
- --build-headless
- )
-
- # bug #843437
- cat >> LocalConfig.kmk <<-EOF || die
- CFLAGS=${CFLAGS}
- CXXFLAGS=${CXXFLAGS}
- EOF
-
- edo ./configure "${myconf[@]}"
-}
-
-src_compile() {
- source ./env.sh || die
-
- # Force kBuild to respect C[XX]FLAGS and MAKEOPTS (bug #178529)
- MAKEJOBS=$(grep -Eo '(\-j|\-\-jobs)(=?|[[:space:]]*)[[:digit:]]+' <<< ${MAKEOPTS})
- MAKELOAD=$(grep -Eo '(\-l|\-\-load-average)(=?|[[:space:]]*)[[:digit:]]+' <<< ${MAKEOPTS})
- MAKEOPTS="${MAKEJOBS} ${MAKELOAD}"
-
- local myemakeargs=(
- VBOX_BUILD_PUBLISHER=_Gentoo
- VBOX_ONLY_ADDITIONS=1
-
- KBUILD_VERBOSE=2
-
- AS="$(tc-getCC)"
- CC="$(tc-getCC)"
- CXX="$(tc-getCXX)"
- LD="$(tc-getCC)"
-
- TOOL_GCC3_CC="$(tc-getCC)"
- TOOL_GCC3_CXX="$(tc-getCXX)"
- TOOL_GCC3_LD="$(tc-getCC)"
- TOOL_GCC3_AS="$(tc-getCC)"
- TOOL_GCC3_AR="$(tc-getAR)"
- TOOL_GCC3_OBJCOPY="$(tc-getOBJCOPY)"
- #TOOL_GCC3_LD_SYSMOD="$(tc-getCC)"
-
- TOOL_GXX3_CC="$(tc-getCC)"
- TOOL_GXX3_CXX="$(tc-getCXX)"
- TOOL_GXX3_LD="$(tc-getCXX)"
- TOOL_GXX3_AS="$(tc-getCXX)"
- TOOL_GXX3_AR="$(tc-getAR)"
- TOOL_GXX3_OBJCOPY="$(tc-getOBJCOPY)"
- #TOOL_GXX3_LD_SYSMOD="$(tc-getCXX)"
-
- TOOL_GCC3_CFLAGS="${CFLAGS}"
- TOOL_GCC3_CXXFLAGS="${CXXFLAGS}"
- VBOX_GCC_OPT="${CXXFLAGS}"
- VBOX_NM="$(tc-getNM)"
- TOOL_YASM_AS=yasm
- )
-
- MAKE="kmk" emake "${myemakeargs[@]}"
-
- # Now creating the kernel modules. We must do this _after_
- # we compiled the user-space tools as we need two of the
- # automatically generated header files. (>=3.2.0)
- linux-mod_src_compile
-}
-
-src_install() {
- linux-mod_src_install
-
- cd "${S}"/out/linux.${ARCH}/release/bin/additions || die
-
- insinto /sbin
- newins mount.vboxsf mount.vboxsf
- fperms 4755 /sbin/mount.vboxsf
-
- newinitd "${FILESDIR}"/${PN}-8.initd-r1 ${PN}
-
- insinto /usr/sbin/
- newins VBoxService vboxguest-service
- fperms 0755 /usr/sbin/vboxguest-service
-
- insinto /usr/bin
- doins VBoxControl
- fperms 0755 /usr/bin/VBoxControl
-
- # VBoxClient user service and xrandr wrapper
- if use X ; then
- doins VBoxClient
- fperms 0755 /usr/bin/VBoxClient
- doins VBoxDRMClient
- fperms 4755 /usr/bin/VBoxDRMClient
-
- pushd "${S}"/src/VBox/Additions/x11/Installer &>/dev/null \
- || die
- newins 98vboxadd-xclient VBoxClient-all
- fperms 0755 /usr/bin/VBoxClient-all
- popd &>/dev/null || die
- fi
-
- # udev rule for vboxdrv
- local udev_rules_dir="/lib/udev/rules.d"
- dodir ${udev_rules_dir}
- echo 'KERNEL=="vboxguest", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
- >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
- || die
- echo 'KERNEL=="vboxuser", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
- >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
- || die
-
- # VBoxClient autostart file
- insinto /etc/xdg/autostart
- doins "${FILESDIR}"/vboxclient.desktop
-
- # sample xorg.conf
- dodoc "${FILESDIR}"/xorg.conf.vbox
- docompress -x "${ED}"/usr/share/doc/${PF}/xorg.conf.vbox
-
- systemd_dounit "${FILESDIR}/${PN}.service"
-}
-
-pkg_postinst() {
- linux-mod_pkg_postinst
- udev_reload
- if ! use X ; then
- elog "use flag X is off, enable it to install the"
- elog "X Window System video driver."
- fi
- elog ""
- elog "Please add users to the \"vboxguest\" group so they can"
- elog "benefit from seamless mode, auto-resize and clipboard."
- elog ""
- elog "The vboxsf group has been added to make automount services work."
- elog "These services are part of the shared folders support."
- elog ""
- elog "Please add:"
- elog "/etc/init.d/${PN}"
- elog "to the default runlevel in order to start"
- elog "needed services."
- elog "To use the VirtualBox X driver, use the following"
- elog "file as your /etc/X11/xorg.conf:"
- elog " /usr/share/doc/${PF}/xorg.conf.vbox"
- elog ""
- elog "Also make sure you use the Mesa library for OpenGL:"
- elog " eselect opengl set xorg-x11"
- elog ""
- elog "An autostart .desktop file has been installed to start"
- elog "VBoxClient in desktop sessions."
- elog ""
- elog "You can mount shared folders with:"
- elog " mount -t vboxsf <shared_folder_name> <mount_point>"
- elog ""
- elog "Warning:"
- elog "this ebuild is only needed if you are running gentoo"
- elog "inside a VirtualBox Virtual Machine, you don't need"
- elog "it to run VirtualBox itself."
- elog ""
-}
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.34-r3.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.34-r3.ebuild
deleted file mode 100644
index 8e6164523f78..000000000000
--- a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.34-r3.ebuild
+++ /dev/null
@@ -1,280 +0,0 @@
-# Copyright 2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit edo linux-mod systemd toolchain-funcs udev
-
-MY_PN="VirtualBox"
-MY_PV="${PV/beta/BETA}"
-MY_PV="${MY_PV/rc/RC}"
-MY_P="${MY_PN}-${MY_PV}"
-[[ "${PV}" == *a ]] && DIR_PV="$(ver_cut 1-3)"
-
-DESCRIPTION="VirtualBox kernel modules and user-space tools for Gentoo guests"
-HOMEPAGE="https://www.virtualbox.org/"
-SRC_URI="https://download.virtualbox.org/virtualbox/${DIR_PV:-${MY_PV}}/${MY_P}.tar.bz2
- https://dev.gentoo.org/~polynomial-c/virtualbox/patchsets/virtualbox-6.1.12-patches-01.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0/$(ver_cut 1-2)"
-[[ "${PV}" == *_beta* ]] || [[ "${PV}" == *_rc* ]] || \
-KEYWORDS="amd64 x86"
-IUSE="X"
-
-# automount Error: VBoxServiceAutoMountWorker: Group "vboxsf" does not exist
-RDEPEND="
- acct-group/vboxguest
- acct-group/vboxsf
- acct-user/vboxguest
- X? ( x11-apps/xrandr
- x11-apps/xrefresh
- x11-libs/libXmu
- x11-libs/libX11
- x11-libs/libXt
- x11-libs/libXext
- x11-libs/libXau
- x11-libs/libXdmcp
- x11-libs/libSM
- x11-libs/libICE )
- sys-apps/dbus
-"
-DEPEND="
- ${RDEPEND}
- >=dev-util/kbuild-0.1.9998.3127
- >=dev-lang/yasm-0.6.2
- sys-devel/bin86
- sys-libs/pam
- sys-power/iasl
- x11-base/xorg-proto
-"
-PDEPEND="
- X? ( x11-drivers/xf86-video-vboxvideo )
-"
-BUILD_TARGETS="all"
-BUILD_TARGET_ARCH="${ARCH}"
-
-S="${WORKDIR}/${MY_PN}-${DIR_PV:-${PV}}"
-VBOX_MOD_SRC_DIR="${S}/out/linux.${ARCH}/release/bin/additions/src"
-
-pkg_setup() {
- export DISTCC_DISABLE=1 #674256
- MODULE_NAMES="vboxguest(misc:${VBOX_MOD_SRC_DIR}/vboxguest:${VBOX_MOD_SRC_DIR}/vboxguest)
- vboxsf(misc:${VBOX_MOD_SRC_DIR}/vboxsf:${VBOX_MOD_SRC_DIR}/vboxsf)"
- use X && MODULE_NAMES+=" vboxvideo(misc:${VBOX_MOD_SRC_DIR}/vboxvideo::${VBOX_MOD_SRC_DIR}/vboxvideo)"
-
- linux-mod_pkg_setup
-}
-
-src_prepare() {
- # Remove shipped binaries (kBuild,yasm), see bug #232775
- rm -r kBuild/bin tools || die
-
- # Provide kernel sources
- pushd src/VBox/Additions &>/dev/null || die
- ebegin "Extracting guest kernel module sources"
- kmk GuestDrivers-src vboxguest-src vboxsf-src vboxvideo-src &>/dev/null
- eend $? || die
- popd &>/dev/null || die
-
- # PaX fixes (see bug #298988)
- pushd "${VBOX_MOD_SRC_DIR}" &>/dev/null || die
- eapply "${FILESDIR}"/vboxguest-6.0.6-log-use-c99.patch
- popd &>/dev/null || die
-
- # Disable things unused or splitted into separate ebuilds
- cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
- use X || echo "VBOX_WITH_X11_ADDITIONS :=" >> LocalConfig.kmk
-
- # Remove pointless GCC version check
- sed -e '/^check_gcc$/d' -i configure || die
-
- # Respect LDFLAGS (bug #759100)
- sed -i -e '/TEMPLATE_VBOXR3EXE_LDFLAGS.linux[ ]*=/ s/$/ $(CCLDFLAGS)/' Config.kmk
-
- # Do not use hard-coded ld (related to bug #488176)
- #sed -e '/QUIET)ld /s@ld @$(LD) @' \
- # -i src/VBox/Devices/PC/ipxe/Makefile.kmk || die
-
- eapply "${WORKDIR}/patches"
- eapply_user
-}
-
-src_configure() {
- tc-export AR CC CXX LD RANLIB
-
- # Build the user-space tools, warnings are harmless
- local myconf=(
- --with-gcc="$(tc-getCC)"
- --with-g++="$(tc-getCXX)"
-
- --nofatal
- --disable-xpcom
- --disable-sdl-ttf
- --disable-pulse
- --disable-alsa
- --target-arch=${ARCH}
- --with-linux="${KV_OUT_DIR}"
- --build-headless
- )
-
- # bug #843437
- # Respect LDFLAGS (bug #759100)
- # Cannot use LDFLAGS here because they also get passed to $(LD)
- cat >> LocalConfig.kmk <<-EOF || die
- CFLAGS=${CFLAGS}
- CXXFLAGS=${CXXFLAGS}
- CCLDFLAGS=${LDFLAGS}
- EOF
-
- edo ./configure "${myconf[@]}"
-}
-
-src_compile() {
- source ./env.sh || die
-
- # Force kBuild to respect C[XX]FLAGS and MAKEOPTS (bug #178529)
- MAKEJOBS=$(grep -Eo '(\-j|\-\-jobs)(=?|[[:space:]]*)[[:digit:]]+' <<< ${MAKEOPTS})
- MAKELOAD=$(grep -Eo '(\-l|\-\-load-average)(=?|[[:space:]]*)[[:digit:]]+' <<< ${MAKEOPTS})
- MAKEOPTS="${MAKEJOBS} ${MAKELOAD}"
-
- local myemakeargs=(
- VBOX_BUILD_PUBLISHER=_Gentoo
- VBOX_ONLY_ADDITIONS=1
-
- KBUILD_VERBOSE=2
-
- AS="$(tc-getCC)"
- CC="$(tc-getCC)"
- CXX="$(tc-getCXX)"
- LD="$(tc-getCC)"
-
- TOOL_GCC3_CC="$(tc-getCC)"
- TOOL_GCC3_CXX="$(tc-getCXX)"
- TOOL_GCC3_LD="$(tc-getCC)"
- TOOL_GCC3_AS="$(tc-getCC)"
- TOOL_GCC3_AR="$(tc-getAR)"
- TOOL_GCC3_OBJCOPY="$(tc-getOBJCOPY)"
- #TOOL_GCC3_LD_SYSMOD="$(tc-getCC)"
-
- TOOL_GXX3_CC="$(tc-getCC)"
- TOOL_GXX3_CXX="$(tc-getCXX)"
- TOOL_GXX3_LD="$(tc-getCXX)"
- TOOL_GXX3_AS="$(tc-getCXX)"
- TOOL_GXX3_AR="$(tc-getAR)"
- TOOL_GXX3_OBJCOPY="$(tc-getOBJCOPY)"
- #TOOL_GXX3_LD_SYSMOD="$(tc-getCXX)"
-
- TOOL_GCC3_CFLAGS="${CFLAGS}"
- TOOL_GCC3_CXXFLAGS="${CXXFLAGS}"
- VBOX_GCC_OPT="${CXXFLAGS}"
- VBOX_NM="$(tc-getNM)"
- TOOL_YASM_AS=yasm
- )
-
- MAKE="kmk" emake "${myemakeargs[@]}"
-
- # Now creating the kernel modules. We must do this _after_
- # we compiled the user-space tools as we need two of the
- # automatically generated header files. (>=3.2.0)
- # Move this here for bug 836037
- BUILD_PARAMS="KERN_DIR=/lib/modules/${KV_FULL}/build KERNOUT=${KV_OUT_DIR} KBUILD_EXTRA_SYMBOLS=${S}/Module.symvers"
- linux-mod_src_compile
-}
-
-src_install() {
- linux-mod_src_install
-
- cd "${S}"/out/linux.${ARCH}/release/bin/additions || die
-
- insinto /sbin
- newins mount.vboxsf mount.vboxsf
- fperms 4755 /sbin/mount.vboxsf
-
- newinitd "${FILESDIR}"/${PN}-8.initd-r1 ${PN}
-
- insinto /usr/sbin/
- newins VBoxService vboxguest-service
- fperms 0755 /usr/sbin/vboxguest-service
-
- insinto /usr/bin
- doins VBoxControl
- fperms 0755 /usr/bin/VBoxControl
-
- # VBoxClient user service and xrandr wrapper
- if use X ; then
- doins VBoxClient
- fperms 0755 /usr/bin/VBoxClient
- doins VBoxDRMClient
- fperms 4755 /usr/bin/VBoxDRMClient
-
- pushd "${S}"/src/VBox/Additions/x11/Installer &>/dev/null \
- || die
- newins 98vboxadd-xclient VBoxClient-all
- fperms 0755 /usr/bin/VBoxClient-all
- popd &>/dev/null || die
- fi
-
- # udev rule for vboxdrv
- local udev_rules_dir="/lib/udev/rules.d"
- dodir ${udev_rules_dir}
- echo 'KERNEL=="vboxguest", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
- >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
- || die
- echo 'KERNEL=="vboxuser", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
- >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
- || die
-
- # VBoxClient autostart file
- insinto /etc/xdg/autostart
- doins "${FILESDIR}"/vboxclient.desktop
-
- # sample xorg.conf
- dodoc "${FILESDIR}"/xorg.conf.vbox
- docompress -x "${ED}"/usr/share/doc/${PF}/xorg.conf.vbox
-
- systemd_dounit "${FILESDIR}/${PN}.service"
-}
-
-pkg_postinst() {
- linux-mod_pkg_postinst
- udev_reload
- if ! use X ; then
- elog "use flag X is off, enable it to install the"
- elog "X Window System video driver."
- fi
- elog ""
- elog "Please add users to the \"vboxguest\" group so they can"
- elog "benefit from seamless mode, auto-resize and clipboard."
- elog ""
- elog "The vboxsf group has been added to make automount services work."
- elog "These services are part of the shared folders support."
- elog ""
- elog "Please add:"
- elog "/etc/init.d/${PN}"
- elog "to the default runlevel in order to start"
- elog "needed services."
- elog "To use the VirtualBox X driver, use the following"
- elog "file as your /etc/X11/xorg.conf:"
- elog " /usr/share/doc/${PF}/xorg.conf.vbox"
- elog ""
- elog "Also make sure you use the Mesa library for OpenGL:"
- elog " eselect opengl set xorg-x11"
- elog ""
- elog "An autostart .desktop file has been installed to start"
- elog "VBoxClient in desktop sessions."
- elog ""
- elog "You can mount shared folders with:"
- elog " mount -t vboxsf <shared_folder_name> <mount_point>"
- elog ""
- elog "Warning:"
- elog "this ebuild is only needed if you are running gentoo"
- elog "inside a VirtualBox Virtual Machine, you don't need"
- elog "it to run VirtualBox itself."
- elog ""
-}
-
-pkg_postrm() {
- linux-mod_pkg_postrm
- udev_reload
-}
^ permalink raw reply related [flat|nested] 6+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: app-emulation/virtualbox-guest-additions/, ...
@ 2022-07-27 21:05 Sam James
0 siblings, 0 replies; 6+ messages in thread
From: Sam James @ 2022-07-27 21:05 UTC (permalink / raw
To: gentoo-commits
commit: 76fbdf92e93e5c7ab63d75c8f36d9d319bf55e87
Author: Viorel Munteanu <ceamac.paragon <AT> gmail <DOT> com>
AuthorDate: Tue Jul 26 19:31:14 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Jul 27 21:05:31 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=76fbdf92
app-emulation/virtualbox-guest-additions: add 6.1.36
Closes: https://bugs.gentoo.org/847097
Signed-off-by: Viorel Munteanu <ceamac.paragon <AT> gmail.com>
Signed-off-by: Sam James <sam <AT> gentoo.org>
app-emulation/virtualbox-guest-additions/Manifest | 2 +
.../files/vboxguest-6.1.36-log-use-c99.patch | 13 +
.../virtualbox-guest-additions-6.1.36.ebuild | 280 +++++++++++++++++++++
3 files changed, 295 insertions(+)
diff --git a/app-emulation/virtualbox-guest-additions/Manifest b/app-emulation/virtualbox-guest-additions/Manifest
index 7c756f072fe3..140f1e61f347 100644
--- a/app-emulation/virtualbox-guest-additions/Manifest
+++ b/app-emulation/virtualbox-guest-additions/Manifest
@@ -1,3 +1,5 @@
DIST VirtualBox-6.1.32.tar.bz2 165758238 BLAKE2B 24873d7cc8bd306ea3552fe75379fbe7be767c85406042344eb047ed31184c3357aea07dda5e15c275f5036ae63106ef1d2e6524b143bc645a6b5ba0016f1391 SHA512 8bf7af6b8b4d3ba90f0e91589cf26400648436eb9da6d31c1a760460bfe5eb7311ac3220b4c9a98ac50e559641d3d5f559134be65288821038255de1c2c7ce1e
DIST VirtualBox-6.1.34.tar.bz2 165761216 BLAKE2B d3c8f7d3d6f408e4c4275c2b2815e92819c871359501ec4fa7212bf7cdc852613e2e4703d8650371097a5bc805efa04ea75bb03ab83d24a869a677555f6e22d5 SHA512 46d63a9fd9df76af654af59fab5cf555858bc2c4b5dc34e2378d85ae784e6380b6def4aab06909a9b5e114a7297269f90cfb2c3d8d6529b423d703afbad18c64
+DIST VirtualBox-6.1.36.tar.bz2 165685382 BLAKE2B 98dbb06450b9df650cb72493bcdea4b88fa9dd21f76d723fdc0bb2c1ab8266f67e972a7222dc9b5bd0d43754911710664bddace753995be025cf6bcc05a24ae5 SHA512 cc3b984a7da40c9bf14831808a2bc2bf7bf6821e53c25fa11cb4b4275feb1d4b0cb4a47d8a360b90c89e5a4038481efe8fe28ee22996dbefb6446761e88a8dec
DIST virtualbox-6.1.12-patches-01.tar.xz 2528 BLAKE2B a5d7cde0daea41bee2e40e46569c725769927a31865d99d13b8b13c4903e59b4097f85da15dc592b9c7e8baf8ff805397af827620f107ba09a468b4d1198ecab SHA512 f71d10a9fbce99c3f631ef30bcfa9d0e017e702ac509541b039e08ccbcd024beb93fde09c43d90af5d9d28f6842a7947f20e7950d3897da3e6d57859657e1123
+DIST virtualbox-patches-6.1.36.tar.bz2 2733 BLAKE2B dcfebfeca4873d382441515d48b4dfee9343bc7c83ea3cbb5002dbf7975143a79fae9a701b67dc35505e9ca03ff1b6293cb7c3279c4fdfda8ad21ba5fb9b7e87 SHA512 1bed5cdefbf8e7c4b0d9092ba4961ecf2262f27f35c71a91ef6f2e8fe8a1d92ed74f06bafbf58d70ba7165d933997f58073f4d4f4051e3ba5c0339b729066f57
diff --git a/app-emulation/virtualbox-guest-additions/files/vboxguest-6.1.36-log-use-c99.patch b/app-emulation/virtualbox-guest-additions/files/vboxguest-6.1.36-log-use-c99.patch
new file mode 100644
index 000000000000..41641f2336a5
--- /dev/null
+++ b/app-emulation/virtualbox-guest-additions/files/vboxguest-6.1.36-log-use-c99.patch
@@ -0,0 +1,13 @@
+https://bugs.gentoo.org/298988
+
+--- a/vboxguest/Makefile
++++ b/vboxguest/Makefile
+@@ -149,7 +149,7 @@
+ IN_MODULE \
+ RT_WITH_VBOX \
+ VBGL_VBOXGUEST \
+- VBOX_WITH_HGCM
++ VBOX_WITH_HGCM LOG_USE_C99
+ ifeq ($(VBOX_KBUILD_TARGET_ARCH),amd64)
+ VBOXMOD_DEFS += VBOX_WITH_64_BITS_GUESTS
+ endif
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.36.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.36.ebuild
new file mode 100644
index 000000000000..90faf81beab9
--- /dev/null
+++ b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.1.36.ebuild
@@ -0,0 +1,280 @@
+# Copyright 2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit edo linux-mod systemd toolchain-funcs udev
+
+MY_PN="VirtualBox"
+MY_PV="${PV/beta/BETA}"
+MY_PV="${MY_PV/rc/RC}"
+MY_P="${MY_PN}-${MY_PV}"
+[[ "${PV}" == *a ]] && DIR_PV="$(ver_cut 1-3)"
+
+DESCRIPTION="VirtualBox kernel modules and user-space tools for Gentoo guests"
+HOMEPAGE="https://www.virtualbox.org/"
+SRC_URI="https://download.virtualbox.org/virtualbox/${DIR_PV:-${MY_PV}}/${MY_P}.tar.bz2
+ https://gitweb.gentoo.org/proj/virtualbox-patches.git/snapshot/virtualbox-patches-${MY_PV}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0/$(ver_cut 1-2)"
+[[ "${PV}" == *_beta* ]] || [[ "${PV}" == *_rc* ]] || \
+KEYWORDS="~amd64 ~x86"
+IUSE="X"
+
+# automount Error: VBoxServiceAutoMountWorker: Group "vboxsf" does not exist
+RDEPEND="
+ acct-group/vboxguest
+ acct-group/vboxsf
+ acct-user/vboxguest
+ X? ( x11-apps/xrandr
+ x11-apps/xrefresh
+ x11-libs/libXmu
+ x11-libs/libX11
+ x11-libs/libXt
+ x11-libs/libXext
+ x11-libs/libXau
+ x11-libs/libXdmcp
+ x11-libs/libSM
+ x11-libs/libICE )
+ sys-apps/dbus
+"
+DEPEND="
+ ${RDEPEND}
+ >=dev-util/kbuild-0.1.9998.3127
+ >=dev-lang/yasm-0.6.2
+ sys-devel/bin86
+ sys-libs/pam
+ sys-power/iasl
+ x11-base/xorg-proto
+"
+PDEPEND="
+ X? ( x11-drivers/xf86-video-vboxvideo )
+"
+BUILD_TARGETS="all"
+BUILD_TARGET_ARCH="${ARCH}"
+
+S="${WORKDIR}/${MY_PN}-${DIR_PV:-${PV}}"
+VBOX_MOD_SRC_DIR="${S}/out/linux.${ARCH}/release/bin/additions/src"
+
+pkg_setup() {
+ export DISTCC_DISABLE=1 #674256
+ MODULE_NAMES="vboxguest(misc:${VBOX_MOD_SRC_DIR}/vboxguest:${VBOX_MOD_SRC_DIR}/vboxguest)
+ vboxsf(misc:${VBOX_MOD_SRC_DIR}/vboxsf:${VBOX_MOD_SRC_DIR}/vboxsf)"
+ use X && MODULE_NAMES+=" vboxvideo(misc:${VBOX_MOD_SRC_DIR}/vboxvideo::${VBOX_MOD_SRC_DIR}/vboxvideo)"
+
+ linux-mod_pkg_setup
+}
+
+src_prepare() {
+ # Remove shipped binaries (kBuild,yasm), see bug #232775
+ rm -r kBuild/bin tools || die
+
+ # Provide kernel sources
+ pushd src/VBox/Additions &>/dev/null || die
+ ebegin "Extracting guest kernel module sources"
+ kmk GuestDrivers-src vboxguest-src vboxsf-src vboxvideo-src &>/dev/null
+ eend $? || die
+ popd &>/dev/null || die
+
+ # PaX fixes (see bug #298988)
+ pushd "${VBOX_MOD_SRC_DIR}" &>/dev/null || die
+ eapply "${FILESDIR}"/vboxguest-6.1.36-log-use-c99.patch
+ popd &>/dev/null || die
+
+ # Disable things unused or splitted into separate ebuilds
+ cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
+ use X || echo "VBOX_WITH_X11_ADDITIONS :=" >> LocalConfig.kmk
+
+ # Remove pointless GCC version check
+ sed -e '/^check_gcc$/d' -i configure || die
+
+ # Respect LDFLAGS (bug #759100)
+ sed -i -e '/TEMPLATE_VBOXR3EXE_LDFLAGS.linux[ ]*=/ s/$/ $(CCLDFLAGS)/' Config.kmk
+
+ # Do not use hard-coded ld (related to bug #488176)
+ #sed -e '/QUIET)ld /s@ld @$(LD) @' \
+ # -i src/VBox/Devices/PC/ipxe/Makefile.kmk || die
+
+ eapply "${WORKDIR}/virtualbox-patches-${MY_PV}/patches"
+ eapply_user
+}
+
+src_configure() {
+ tc-export AR CC CXX LD RANLIB
+
+ # Build the user-space tools, warnings are harmless
+ local myconf=(
+ --with-gcc="$(tc-getCC)"
+ --with-g++="$(tc-getCXX)"
+
+ --nofatal
+ --disable-xpcom
+ --disable-sdl-ttf
+ --disable-pulse
+ --disable-alsa
+ --target-arch=${ARCH}
+ --with-linux="${KV_OUT_DIR}"
+ --build-headless
+ )
+
+ # bug #843437
+ # Respect LDFLAGS (bug #759100)
+ # Cannot use LDFLAGS here because they also get passed to $(LD)
+ cat >> LocalConfig.kmk <<-EOF || die
+ CFLAGS=${CFLAGS}
+ CXXFLAGS=${CXXFLAGS}
+ CCLDFLAGS=${LDFLAGS}
+ EOF
+
+ edo ./configure "${myconf[@]}"
+}
+
+src_compile() {
+ source ./env.sh || die
+
+ # Force kBuild to respect C[XX]FLAGS and MAKEOPTS (bug #178529)
+ MAKEJOBS=$(grep -Eo '(\-j|\-\-jobs)(=?|[[:space:]]*)[[:digit:]]+' <<< ${MAKEOPTS})
+ MAKELOAD=$(grep -Eo '(\-l|\-\-load-average)(=?|[[:space:]]*)[[:digit:]]+' <<< ${MAKEOPTS})
+ MAKEOPTS="${MAKEJOBS} ${MAKELOAD}"
+
+ local myemakeargs=(
+ VBOX_BUILD_PUBLISHER=_Gentoo
+ VBOX_ONLY_ADDITIONS=1
+
+ KBUILD_VERBOSE=2
+
+ AS="$(tc-getCC)"
+ CC="$(tc-getCC)"
+ CXX="$(tc-getCXX)"
+ LD="$(tc-getCC)"
+
+ TOOL_GCC3_CC="$(tc-getCC)"
+ TOOL_GCC3_CXX="$(tc-getCXX)"
+ TOOL_GCC3_LD="$(tc-getCC)"
+ TOOL_GCC3_AS="$(tc-getCC)"
+ TOOL_GCC3_AR="$(tc-getAR)"
+ TOOL_GCC3_OBJCOPY="$(tc-getOBJCOPY)"
+ #TOOL_GCC3_LD_SYSMOD="$(tc-getCC)"
+
+ TOOL_GXX3_CC="$(tc-getCC)"
+ TOOL_GXX3_CXX="$(tc-getCXX)"
+ TOOL_GXX3_LD="$(tc-getCXX)"
+ TOOL_GXX3_AS="$(tc-getCXX)"
+ TOOL_GXX3_AR="$(tc-getAR)"
+ TOOL_GXX3_OBJCOPY="$(tc-getOBJCOPY)"
+ #TOOL_GXX3_LD_SYSMOD="$(tc-getCXX)"
+
+ TOOL_GCC3_CFLAGS="${CFLAGS}"
+ TOOL_GCC3_CXXFLAGS="${CXXFLAGS}"
+ VBOX_GCC_OPT="${CXXFLAGS}"
+ VBOX_NM="$(tc-getNM)"
+ TOOL_YASM_AS=yasm
+ )
+
+ MAKE="kmk" emake "${myemakeargs[@]}"
+
+ # Now creating the kernel modules. We must do this _after_
+ # we compiled the user-space tools as we need two of the
+ # automatically generated header files. (>=3.2.0)
+ # Move this here for bug 836037
+ BUILD_PARAMS="KERN_DIR=/lib/modules/${KV_FULL}/build KERNOUT=${KV_OUT_DIR} KBUILD_EXTRA_SYMBOLS=${S}/Module.symvers"
+ linux-mod_src_compile
+}
+
+src_install() {
+ linux-mod_src_install
+
+ cd "${S}"/out/linux.${ARCH}/release/bin/additions || die
+
+ insinto /sbin
+ newins mount.vboxsf mount.vboxsf
+ fperms 4755 /sbin/mount.vboxsf
+
+ newinitd "${FILESDIR}"/${PN}-8.initd-r1 ${PN}
+
+ insinto /usr/sbin/
+ newins VBoxService vboxguest-service
+ fperms 0755 /usr/sbin/vboxguest-service
+
+ insinto /usr/bin
+ doins VBoxControl
+ fperms 0755 /usr/bin/VBoxControl
+
+ # VBoxClient user service and xrandr wrapper
+ if use X ; then
+ doins VBoxClient
+ fperms 0755 /usr/bin/VBoxClient
+ doins VBoxDRMClient
+ fperms 4755 /usr/bin/VBoxDRMClient
+
+ pushd "${S}"/src/VBox/Additions/x11/Installer &>/dev/null \
+ || die
+ newins 98vboxadd-xclient VBoxClient-all
+ fperms 0755 /usr/bin/VBoxClient-all
+ popd &>/dev/null || die
+ fi
+
+ # udev rule for vboxdrv
+ local udev_rules_dir="/lib/udev/rules.d"
+ dodir ${udev_rules_dir}
+ echo 'KERNEL=="vboxguest", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+ echo 'KERNEL=="vboxuser", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${ED}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+
+ # VBoxClient autostart file
+ insinto /etc/xdg/autostart
+ doins "${FILESDIR}"/vboxclient.desktop
+
+ # sample xorg.conf
+ dodoc "${FILESDIR}"/xorg.conf.vbox
+ docompress -x "${ED}"/usr/share/doc/${PF}/xorg.conf.vbox
+
+ systemd_dounit "${FILESDIR}/${PN}.service"
+}
+
+pkg_postinst() {
+ linux-mod_pkg_postinst
+ udev_reload
+ if ! use X ; then
+ elog "use flag X is off, enable it to install the"
+ elog "X Window System video driver."
+ fi
+ elog ""
+ elog "Please add users to the \"vboxguest\" group so they can"
+ elog "benefit from seamless mode, auto-resize and clipboard."
+ elog ""
+ elog "The vboxsf group has been added to make automount services work."
+ elog "These services are part of the shared folders support."
+ elog ""
+ elog "Please add:"
+ elog "/etc/init.d/${PN}"
+ elog "to the default runlevel in order to start"
+ elog "needed services."
+ elog "To use the VirtualBox X driver, use the following"
+ elog "file as your /etc/X11/xorg.conf:"
+ elog " /usr/share/doc/${PF}/xorg.conf.vbox"
+ elog ""
+ elog "Also make sure you use the Mesa library for OpenGL:"
+ elog " eselect opengl set xorg-x11"
+ elog ""
+ elog "An autostart .desktop file has been installed to start"
+ elog "VBoxClient in desktop sessions."
+ elog ""
+ elog "You can mount shared folders with:"
+ elog " mount -t vboxsf <shared_folder_name> <mount_point>"
+ elog ""
+ elog "Warning:"
+ elog "this ebuild is only needed if you are running gentoo"
+ elog "inside a VirtualBox Virtual Machine, you don't need"
+ elog "it to run VirtualBox itself."
+ elog ""
+}
+
+pkg_postrm() {
+ linux-mod_pkg_postrm
+ udev_reload
+}
^ permalink raw reply related [flat|nested] 6+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: app-emulation/virtualbox-guest-additions/, ...
@ 2019-09-24 19:56 Thomas Deutschmann
0 siblings, 0 replies; 6+ messages in thread
From: Thomas Deutschmann @ 2019-09-24 19:56 UTC (permalink / raw
To: gentoo-commits
commit: ca27b4f4319e1955f399c9766bbd9199a2a4c3a2
Author: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
AuthorDate: Tue Sep 24 19:55:40 2019 +0000
Commit: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
CommitDate: Tue Sep 24 19:56:03 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ca27b4f4
app-emulation/virtualbox-guest-additions: add linux-5.3+ compatibility
Closes: https://bugs.gentoo.org/694614
Package-Manager: Portage-2.3.76, Repoman-2.3.17
Signed-off-by: Thomas Deutschmann <whissi <AT> gentoo.org>
...additions-6.0.12-linux-5.3+-compatibility.patch | 75 ++++++++++++++++++++++
.../virtualbox-guest-additions-6.0.12.ebuild | 4 ++
2 files changed, 79 insertions(+)
diff --git a/app-emulation/virtualbox-guest-additions/files/virtualbox-guest-additions-6.0.12-linux-5.3+-compatibility.patch b/app-emulation/virtualbox-guest-additions/files/virtualbox-guest-additions-6.0.12-linux-5.3+-compatibility.patch
new file mode 100644
index 00000000000..ad4b460c814
--- /dev/null
+++ b/app-emulation/virtualbox-guest-additions/files/virtualbox-guest-additions-6.0.12-linux-5.3+-compatibility.patch
@@ -0,0 +1,75 @@
+https://bugs.gentoo.org/694614
+https://www.virtualbox.org/ticket/18911#comment:5
+
+--- a/HostDrivers/VBoxNetFlt/linux/VBoxNetFlt-linux.c
++++ b/HostDrivers/VBoxNetFlt/linux/VBoxNetFlt-linux.c
+@@ -2123,7 +2123,9 @@ static int vboxNetFltLinuxEnumeratorCallback(struct notifier_block *self, unsign
+ #endif
+ if (in_dev != NULL)
+ {
+- for_ifa(in_dev) {
++ struct in_ifaddr *ifa;
++
++ for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) {
+ if (VBOX_IPV4_IS_LOOPBACK(ifa->ifa_address))
+ return NOTIFY_OK;
+
+@@ -2137,7 +2139,7 @@ static int vboxNetFltLinuxEnumeratorCallback(struct notifier_block *self, unsign
+
+ pThis->pSwitchPort->pfnNotifyHostAddress(pThis->pSwitchPort,
+ /* :fAdded */ true, kIntNetAddrType_IPv4, &ifa->ifa_address);
+- } endfor_ifa(in_dev);
++ }
+ }
+
+ /*
+--- a/Runtime/r0drv/linux/mp-r0drv-linux.c
++++ b/Runtime/r0drv/linux/mp-r0drv-linux.c
+@@ -283,12 +283,15 @@ RTDECL(int) RTMpOnAll(PFNRTMPWORKER pfnWorker, void *pvUser1, void *pvUser2)
+ if (RTCpuSetCount(&OnlineSet) > 1)
+ {
+ /* Fire the function on all other CPUs without waiting for completion. */
+-# if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++# if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 3, 0)
++ smp_call_function(rtmpLinuxAllWrapper, &Args, 0 /* wait */);
++# elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
+ int rc = smp_call_function(rtmpLinuxAllWrapper, &Args, 0 /* wait */);
++ Assert(!rc); NOREF(rc);
+ # else
+ int rc = smp_call_function(rtmpLinuxAllWrapper, &Args, 0 /* retry */, 0 /* wait */);
+-# endif
+ Assert(!rc); NOREF(rc);
++# endif
+ }
+ #endif
+
+@@ -326,7 +329,6 @@ RTDECL(int) RTMpOnOthers(PFNRTMPWORKER pfnWorker, void *pvUser1, void *pvUser2)
+ {
+ #ifdef CONFIG_SMP
+ IPRT_LINUX_SAVE_EFL_AC();
+- int rc;
+ RTMPARGS Args;
+
+ RTTHREADPREEMPTSTATE PreemptState = RTTHREADPREEMPTSTATE_INITIALIZER;
+@@ -337,14 +339,17 @@ RTDECL(int) RTMpOnOthers(PFNRTMPWORKER pfnWorker, void *pvUser1, void *pvUser2)
+ Args.cHits = 0;
+
+ RTThreadPreemptDisable(&PreemptState);
+-# if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
+- rc = smp_call_function(rtmpLinuxWrapper, &Args, 1 /* wait */);
++# if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 3, 0)
++ smp_call_function(rtmpLinuxWrapper, &Args, 1 /* wait */);
++# elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++ int rc = smp_call_function(rtmpLinuxWrapper, &Args, 1 /* wait */);
++ Assert(rc == 0); NOREF(rc);
+ # else /* older kernels */
+- rc = smp_call_function(rtmpLinuxWrapper, &Args, 0 /* retry */, 1 /* wait */);
++ int rc = smp_call_function(rtmpLinuxWrapper, &Args, 0 /* retry */, 1 /* wait */);
++ Assert(rc == 0); NOREF(rc);
+ # endif /* older kernels */
+ RTThreadPreemptRestore(&PreemptState);
+
+- Assert(rc == 0); NOREF(rc);
+ IPRT_LINUX_RESTORE_EFL_AC();
+ #else
+ RT_NOREF(pfnWorker, pvUser1, pvUser2);
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.0.12.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.0.12.ebuild
index efbf2bd2fdf..9ac2195b1e0 100644
--- a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.0.12.ebuild
+++ b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-6.0.12.ebuild
@@ -71,6 +71,10 @@ src_prepare() {
eend
popd &>/dev/null || die
+ pushd src/VBox &>/dev/null || die
+ eapply "${FILESDIR}"/virtualbox-guest-additions-6.0.12-linux-5.3+-compatibility.patch
+ popd &>/dev/null || die
+
# PaX fixes (see bug #298988)
pushd "${VBOX_MOD_SRC_DIR}" &>/dev/null || die
eapply "${FILESDIR}"/vboxguest-6.0.6-log-use-c99.patch
^ permalink raw reply related [flat|nested] 6+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: app-emulation/virtualbox-guest-additions/, ...
@ 2016-11-01 15:35 Lars Wendler
0 siblings, 0 replies; 6+ messages in thread
From: Lars Wendler @ 2016-11-01 15:35 UTC (permalink / raw
To: gentoo-commits
commit: 513442f7a7c0593bbffe5075731ca43925d35f0e
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Tue Nov 1 15:34:36 2016 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Tue Nov 1 15:34:57 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=513442f7
virtualbox guest packages: Bump to versions 5.1.6 and 5.1.8
Package-Manager: portage-2.3.2
Signed-off-by: Lars Wendler <polynomial-c <AT> gentoo.org>
app-emulation/virtualbox-guest-additions/Manifest | 2 +
.../virtualbox-guest-additions-5.1.6.ebuild | 218 ++++++++++++++++++++
.../virtualbox-guest-additions-5.1.8.ebuild | 218 ++++++++++++++++++++
x11-drivers/xf86-video-virtualbox/Manifest | 2 +
...ideo-virtualbox-5.1.4-Makefile.module.kms.patch | 11 ++
.../xf86-video-virtualbox-5.1.6.ebuild | 220 +++++++++++++++++++++
.../xf86-video-virtualbox-5.1.8.ebuild | 220 +++++++++++++++++++++
7 files changed, 891 insertions(+)
diff --git a/app-emulation/virtualbox-guest-additions/Manifest b/app-emulation/virtualbox-guest-additions/Manifest
index 70f7832..05aac7a 100644
--- a/app-emulation/virtualbox-guest-additions/Manifest
+++ b/app-emulation/virtualbox-guest-additions/Manifest
@@ -2,3 +2,5 @@ DIST VirtualBox-4.3.38.tar.bz2 98437150 SHA256 36f16d435acf04c1dce81df08ba0b522b
DIST VirtualBox-4.3.40.tar.bz2 98760522 SHA256 4bbea49ee1eaa600db7af64b05c8ce6a1f7585de08f4f85cd7b6f0f7a798bcc6 SHA512 9af5266587206795b685f642633966d2d380130c559f64ce61d81137258b71fd7dfb9b97d67f54ddc2482c44bd226dee02b8ee1fb5f0ce0ec2044cfa1d364260 WHIRLPOOL f0687e094f35af262c0e64a0859d95adc1a8becd434f73da8a0c952875bdc875210cb05040de868dc2d43626168ff3e220069b3976e58ec727fead9366d5c9dc
DIST VirtualBox-5.0.16.tar.bz2 111062984 SHA256 f5a44d33a1db911f445b2eb2d22d9293a96a535cba488b5a235577ef868fa63c SHA512 3da3a227360fb50d299e99770378f65e8cb99525377343fa8faff2360be66643d46f68323d6a8b8d4d26182082f171bb35ab2497167bf6df18827a5ea7742074 WHIRLPOOL ea709057c588f28820790c2b193decba9ee0c57e0f82aa4361ca87aef661315182e18b5ee29558e47ed92f6037eb91befa5390680661a7b9f2248c7819b4a85c
DIST VirtualBox-5.0.20.tar.bz2 111231246 SHA256 af9c0787aae22964a1192cefbf9aa91a40c1d41e5fea485adebf09ab922d4c2b SHA512 a039455eed3715b9aa42e2dc6b65ea68b27899c0bcf0065a93c53d1093cce56ebf8a6982cd804208ef9e51794eab9c5c4f3b20550d41532fd4addbd7afda0f8e WHIRLPOOL f74f0a910e5e3f7b1704f57e9831f88b1036efbc61e3b97779f5b2a337ad70d55638b59f356c769d4b6bfd5955348d490f5080b04a3f494f25eb176944756cfd
+DIST VirtualBox-5.1.6.tar.bz2 114669517 SHA256 2e0112b0d85841587b8f212e6ba8f6c35b31e1cce6b6999497dc917cd37e6911 SHA512 7b10c203692a091b3de8dda147b386e17fa7d2bdb56031163e0551e54c1ff6a8e953361d51cc6f7bb6978544a6517e843b446e866aa1fa6f96b4677dda27daa4 WHIRLPOOL ba6ea523dc06622854b304b408f2ce402d164ae4dbc5eeb4cc675c3e4c7d8e12db1a3bcee7d19f67d274ff92b32e143c111d5d732b463c48d72d4036910ce141
+DIST VirtualBox-5.1.8.tar.bz2 114688166 SHA256 e447031de468aee746529b2cf60768922f9beff22a13c54284aa430f5e925933 SHA512 178299173ee0062e23aee779faa893a42815d17163eab9ba2ed8b46be63a7110fe1690792de21514dc05ccd5a1752ea0f11357220e0e6f91f101dea3416e819c WHIRLPOOL 20ea8d253d177fd11c4349656aaa0f87f0fb76018511b345e85800d4dd8ab1e2e05c300a1f932670e5f5fac6ea547bfaa0a52b8526c4f363358911c770444a81
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-5.1.6.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-5.1.6.ebuild
new file mode 100644
index 00000000..99fe674
--- /dev/null
+++ b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-5.1.6.ebuild
@@ -0,0 +1,218 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=6
+
+inherit eutils linux-mod systemd user toolchain-funcs
+
+MY_PV="${PV/beta/BETA}"
+MY_PV="${MY_PV/rc/RC}"
+MY_P=VirtualBox-${MY_PV}
+DESCRIPTION="VirtualBox kernel modules and user-space tools for Gentoo guests"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="X"
+
+RDEPEND="X? ( ~x11-drivers/xf86-video-virtualbox-${PV}
+ x11-apps/xrandr
+ x11-apps/xrefresh
+ x11-libs/libXmu
+ x11-libs/libX11
+ x11-libs/libXt
+ x11-libs/libXext
+ x11-libs/libXau
+ x11-libs/libXdmcp
+ x11-libs/libSM
+ x11-libs/libICE
+ x11-proto/glproto )
+ sys-apps/dbus
+ !!x11-drivers/xf86-input-virtualbox"
+DEPEND="${RDEPEND}
+ >=dev-util/kbuild-0.1.9998_pre20131130
+ >=dev-lang/yasm-0.6.2
+ sys-devel/bin86
+ sys-libs/pam
+ sys-power/iasl
+ X? ( x11-proto/renderproto )
+ !X? ( x11-proto/xproto )"
+
+BUILD_TARGETS="all"
+BUILD_TARGET_ARCH="${ARCH}"
+MODULE_NAMES="vboxguest(misc:${WORKDIR}/vboxguest:${WORKDIR}/vboxguest)
+ vboxsf(misc:${WORKDIR}/vboxsf:${WORKDIR}/vboxsf)"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+ linux-mod_pkg_setup
+ BUILD_PARAMS="KERN_DIR=${KV_OUT_DIR} KERNOUT=${KV_OUT_DIR}"
+ enewgroup vboxguest
+ enewuser vboxguest -1 /bin/sh /dev/null vboxguest
+ # automount Error: VBoxServiceAutoMountWorker: Group "vboxsf" does not exist
+ enewgroup vboxsf
+}
+
+src_unpack() {
+ unpack ${A}
+
+ # Create and unpack a tarball with the sources of the Linux guest
+ # kernel modules, to include all the needed files
+ "${S}"/src/VBox/Additions/linux/export_modules "${WORKDIR}/vbox-kmod.tar.gz"
+ unpack ./vbox-kmod.tar.gz
+
+ # Remove shipped binaries (kBuild,yasm), see bug #232775
+ cd "${S}"
+ rm -rf kBuild/bin tools
+}
+
+src_prepare() {
+ # PaX fixes (see bug #298988)
+ pushd "${WORKDIR}" &>/dev/null || die
+ eapply "${FILESDIR}"/vboxguest-4.1.0-log-use-c99.patch
+ popd &>/dev/null || die
+
+ # Disable things unused or splitted into separate ebuilds
+ cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
+ use X || echo "VBOX_WITH_X11_ADDITIONS :=" >> LocalConfig.kmk
+
+ # stupid new header references...
+ for vboxheader in {product,revision,version}-generated.h ; do
+ for mdir in vbox{guest,sf} ; do
+ ln -sf "${S}"/out/linux.${ARCH}/release/${vboxheader} \
+ "${WORKDIR}/${mdir}/${vboxheader}"
+ done
+ done
+
+ # Remove pointless GCC version limitations in check_gcc()
+ sed -e "/\s*-o\s*\\\(\s*\$cc_maj\s*-eq\s*[5-9]\s*-a\s*\$cc_min\s*-gt\s*[0-5]\s*\\\)\s*\\\/d" \
+ -i configure || die
+
+ eapply_user
+}
+
+src_configure() {
+ # build the user-space tools, warnings are harmless
+ local cmd=(
+ ./configure
+ --nofatal
+ --disable-xpcom
+ --disable-sdl-ttf
+ --disable-pulse
+ --disable-alsa
+ --with-gcc="$(tc-getCC)"
+ --with-g++="$(tc-getCXX)"
+ --target-arch=${ARCH}
+ --with-linux="${KV_OUT_DIR}"
+ --build-headless
+ )
+ echo "${cmd[@]}"
+ "${cmd[@]}" || die "configure failed"
+ source ./env.sh
+ export VBOX_GCC_OPT="${CFLAGS} ${CPPFLAGS}"
+}
+
+src_compile() {
+ MAKE="kmk" \
+ emake TOOL_YASM_AS=yasm \
+ VBOX_ONLY_ADDITIONS=1 \
+ KBUILD_VERBOSE=2
+
+ # Now creating the kernel modules. We must do this _after_
+ # we compiled the user-space tools as we need two of the
+ # automatically generated header files. (>=3.2.0)
+ linux-mod_src_compile
+}
+
+src_install() {
+ linux-mod_src_install
+
+ cd "${S}"/out/linux.${ARCH}/release/bin/additions || die
+
+ insinto /sbin
+ newins mount.vboxsf mount.vboxsf
+ fperms 4755 /sbin/mount.vboxsf
+
+ newinitd "${FILESDIR}"/${PN}-8.initd ${PN}
+
+ insinto /usr/sbin/
+ newins VBoxService vboxguest-service
+ fperms 0755 /usr/sbin/vboxguest-service
+
+ insinto /usr/bin
+ doins VBoxControl
+ fperms 0755 /usr/bin/VBoxControl
+
+ # VBoxClient user service and xrandr wrapper
+ if use X ; then
+ doins VBoxClient
+ fperms 0755 /usr/bin/VBoxClient
+
+ pushd "${S}"/src/VBox/Additions/x11/Installer &>/dev/null \
+ || die
+ newins 98vboxadd-xclient VBoxClient-all
+ fperms 0755 /usr/bin/VBoxClient-all
+ popd &>/dev/null || die
+ fi
+
+ # udev rule for vboxdrv
+ local udev_rules_dir="/lib/udev/rules.d"
+ dodir ${udev_rules_dir}
+ echo 'KERNEL=="vboxguest", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${D}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+ echo 'KERNEL=="vboxuser", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${D}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+
+ # VBoxClient autostart file
+ insinto /etc/xdg/autostart
+ doins "${FILESDIR}"/vboxclient.desktop
+
+ # sample xorg.conf
+ insinto /usr/share/doc/${PF}
+ doins "${FILESDIR}"/xorg.conf.vbox
+
+ systemd_dounit "${FILESDIR}/${PN}.service"
+}
+
+pkg_postinst() {
+ linux-mod_pkg_postinst
+ if ! use X ; then
+ elog "use flag X is off, enable it to install the"
+ elog "X Window System video driver."
+ fi
+ elog ""
+ elog "Please add users to the \"vboxguest\" group so they can"
+ elog "benefit from seamless mode, auto-resize and clipboard."
+ elog ""
+ elog "The vboxsf group has been added to make automount services work."
+ elog "These services are part of the shared folders support."
+ elog ""
+ elog "Please add:"
+ elog "/etc/init.d/${PN}"
+ elog "to the default runlevel in order to start"
+ elog "needed services."
+ elog "To use the VirtualBox X driver, use the following"
+ elog "file as your /etc/X11/xorg.conf:"
+ elog " /usr/share/doc/${PF}/xorg.conf.vbox"
+ elog ""
+ elog "Also make sure you use the Mesa library for OpenGL:"
+ elog " eselect opengl set xorg-x11"
+ elog ""
+ elog "An autostart .desktop file has been installed to start"
+ elog "VBoxClient in desktop sessions."
+ elog ""
+ elog "You can mount shared folders with:"
+ elog " mount -t vboxsf <shared_folder_name> <mount_point>"
+ elog ""
+ elog "Warning:"
+ elog "this ebuild is only needed if you are running gentoo"
+ elog "inside a VirtualBox Virtual Machine, you don't need"
+ elog "it to run VirtualBox itself."
+ elog ""
+}
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-5.1.8.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-5.1.8.ebuild
new file mode 100644
index 00000000..99fe674
--- /dev/null
+++ b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-5.1.8.ebuild
@@ -0,0 +1,218 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=6
+
+inherit eutils linux-mod systemd user toolchain-funcs
+
+MY_PV="${PV/beta/BETA}"
+MY_PV="${MY_PV/rc/RC}"
+MY_P=VirtualBox-${MY_PV}
+DESCRIPTION="VirtualBox kernel modules and user-space tools for Gentoo guests"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="X"
+
+RDEPEND="X? ( ~x11-drivers/xf86-video-virtualbox-${PV}
+ x11-apps/xrandr
+ x11-apps/xrefresh
+ x11-libs/libXmu
+ x11-libs/libX11
+ x11-libs/libXt
+ x11-libs/libXext
+ x11-libs/libXau
+ x11-libs/libXdmcp
+ x11-libs/libSM
+ x11-libs/libICE
+ x11-proto/glproto )
+ sys-apps/dbus
+ !!x11-drivers/xf86-input-virtualbox"
+DEPEND="${RDEPEND}
+ >=dev-util/kbuild-0.1.9998_pre20131130
+ >=dev-lang/yasm-0.6.2
+ sys-devel/bin86
+ sys-libs/pam
+ sys-power/iasl
+ X? ( x11-proto/renderproto )
+ !X? ( x11-proto/xproto )"
+
+BUILD_TARGETS="all"
+BUILD_TARGET_ARCH="${ARCH}"
+MODULE_NAMES="vboxguest(misc:${WORKDIR}/vboxguest:${WORKDIR}/vboxguest)
+ vboxsf(misc:${WORKDIR}/vboxsf:${WORKDIR}/vboxsf)"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+ linux-mod_pkg_setup
+ BUILD_PARAMS="KERN_DIR=${KV_OUT_DIR} KERNOUT=${KV_OUT_DIR}"
+ enewgroup vboxguest
+ enewuser vboxguest -1 /bin/sh /dev/null vboxguest
+ # automount Error: VBoxServiceAutoMountWorker: Group "vboxsf" does not exist
+ enewgroup vboxsf
+}
+
+src_unpack() {
+ unpack ${A}
+
+ # Create and unpack a tarball with the sources of the Linux guest
+ # kernel modules, to include all the needed files
+ "${S}"/src/VBox/Additions/linux/export_modules "${WORKDIR}/vbox-kmod.tar.gz"
+ unpack ./vbox-kmod.tar.gz
+
+ # Remove shipped binaries (kBuild,yasm), see bug #232775
+ cd "${S}"
+ rm -rf kBuild/bin tools
+}
+
+src_prepare() {
+ # PaX fixes (see bug #298988)
+ pushd "${WORKDIR}" &>/dev/null || die
+ eapply "${FILESDIR}"/vboxguest-4.1.0-log-use-c99.patch
+ popd &>/dev/null || die
+
+ # Disable things unused or splitted into separate ebuilds
+ cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
+ use X || echo "VBOX_WITH_X11_ADDITIONS :=" >> LocalConfig.kmk
+
+ # stupid new header references...
+ for vboxheader in {product,revision,version}-generated.h ; do
+ for mdir in vbox{guest,sf} ; do
+ ln -sf "${S}"/out/linux.${ARCH}/release/${vboxheader} \
+ "${WORKDIR}/${mdir}/${vboxheader}"
+ done
+ done
+
+ # Remove pointless GCC version limitations in check_gcc()
+ sed -e "/\s*-o\s*\\\(\s*\$cc_maj\s*-eq\s*[5-9]\s*-a\s*\$cc_min\s*-gt\s*[0-5]\s*\\\)\s*\\\/d" \
+ -i configure || die
+
+ eapply_user
+}
+
+src_configure() {
+ # build the user-space tools, warnings are harmless
+ local cmd=(
+ ./configure
+ --nofatal
+ --disable-xpcom
+ --disable-sdl-ttf
+ --disable-pulse
+ --disable-alsa
+ --with-gcc="$(tc-getCC)"
+ --with-g++="$(tc-getCXX)"
+ --target-arch=${ARCH}
+ --with-linux="${KV_OUT_DIR}"
+ --build-headless
+ )
+ echo "${cmd[@]}"
+ "${cmd[@]}" || die "configure failed"
+ source ./env.sh
+ export VBOX_GCC_OPT="${CFLAGS} ${CPPFLAGS}"
+}
+
+src_compile() {
+ MAKE="kmk" \
+ emake TOOL_YASM_AS=yasm \
+ VBOX_ONLY_ADDITIONS=1 \
+ KBUILD_VERBOSE=2
+
+ # Now creating the kernel modules. We must do this _after_
+ # we compiled the user-space tools as we need two of the
+ # automatically generated header files. (>=3.2.0)
+ linux-mod_src_compile
+}
+
+src_install() {
+ linux-mod_src_install
+
+ cd "${S}"/out/linux.${ARCH}/release/bin/additions || die
+
+ insinto /sbin
+ newins mount.vboxsf mount.vboxsf
+ fperms 4755 /sbin/mount.vboxsf
+
+ newinitd "${FILESDIR}"/${PN}-8.initd ${PN}
+
+ insinto /usr/sbin/
+ newins VBoxService vboxguest-service
+ fperms 0755 /usr/sbin/vboxguest-service
+
+ insinto /usr/bin
+ doins VBoxControl
+ fperms 0755 /usr/bin/VBoxControl
+
+ # VBoxClient user service and xrandr wrapper
+ if use X ; then
+ doins VBoxClient
+ fperms 0755 /usr/bin/VBoxClient
+
+ pushd "${S}"/src/VBox/Additions/x11/Installer &>/dev/null \
+ || die
+ newins 98vboxadd-xclient VBoxClient-all
+ fperms 0755 /usr/bin/VBoxClient-all
+ popd &>/dev/null || die
+ fi
+
+ # udev rule for vboxdrv
+ local udev_rules_dir="/lib/udev/rules.d"
+ dodir ${udev_rules_dir}
+ echo 'KERNEL=="vboxguest", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${D}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+ echo 'KERNEL=="vboxuser", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${D}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+
+ # VBoxClient autostart file
+ insinto /etc/xdg/autostart
+ doins "${FILESDIR}"/vboxclient.desktop
+
+ # sample xorg.conf
+ insinto /usr/share/doc/${PF}
+ doins "${FILESDIR}"/xorg.conf.vbox
+
+ systemd_dounit "${FILESDIR}/${PN}.service"
+}
+
+pkg_postinst() {
+ linux-mod_pkg_postinst
+ if ! use X ; then
+ elog "use flag X is off, enable it to install the"
+ elog "X Window System video driver."
+ fi
+ elog ""
+ elog "Please add users to the \"vboxguest\" group so they can"
+ elog "benefit from seamless mode, auto-resize and clipboard."
+ elog ""
+ elog "The vboxsf group has been added to make automount services work."
+ elog "These services are part of the shared folders support."
+ elog ""
+ elog "Please add:"
+ elog "/etc/init.d/${PN}"
+ elog "to the default runlevel in order to start"
+ elog "needed services."
+ elog "To use the VirtualBox X driver, use the following"
+ elog "file as your /etc/X11/xorg.conf:"
+ elog " /usr/share/doc/${PF}/xorg.conf.vbox"
+ elog ""
+ elog "Also make sure you use the Mesa library for OpenGL:"
+ elog " eselect opengl set xorg-x11"
+ elog ""
+ elog "An autostart .desktop file has been installed to start"
+ elog "VBoxClient in desktop sessions."
+ elog ""
+ elog "You can mount shared folders with:"
+ elog " mount -t vboxsf <shared_folder_name> <mount_point>"
+ elog ""
+ elog "Warning:"
+ elog "this ebuild is only needed if you are running gentoo"
+ elog "inside a VirtualBox Virtual Machine, you don't need"
+ elog "it to run VirtualBox itself."
+ elog ""
+}
diff --git a/x11-drivers/xf86-video-virtualbox/Manifest b/x11-drivers/xf86-video-virtualbox/Manifest
index 70f7832..05aac7a 100644
--- a/x11-drivers/xf86-video-virtualbox/Manifest
+++ b/x11-drivers/xf86-video-virtualbox/Manifest
@@ -2,3 +2,5 @@ DIST VirtualBox-4.3.38.tar.bz2 98437150 SHA256 36f16d435acf04c1dce81df08ba0b522b
DIST VirtualBox-4.3.40.tar.bz2 98760522 SHA256 4bbea49ee1eaa600db7af64b05c8ce6a1f7585de08f4f85cd7b6f0f7a798bcc6 SHA512 9af5266587206795b685f642633966d2d380130c559f64ce61d81137258b71fd7dfb9b97d67f54ddc2482c44bd226dee02b8ee1fb5f0ce0ec2044cfa1d364260 WHIRLPOOL f0687e094f35af262c0e64a0859d95adc1a8becd434f73da8a0c952875bdc875210cb05040de868dc2d43626168ff3e220069b3976e58ec727fead9366d5c9dc
DIST VirtualBox-5.0.16.tar.bz2 111062984 SHA256 f5a44d33a1db911f445b2eb2d22d9293a96a535cba488b5a235577ef868fa63c SHA512 3da3a227360fb50d299e99770378f65e8cb99525377343fa8faff2360be66643d46f68323d6a8b8d4d26182082f171bb35ab2497167bf6df18827a5ea7742074 WHIRLPOOL ea709057c588f28820790c2b193decba9ee0c57e0f82aa4361ca87aef661315182e18b5ee29558e47ed92f6037eb91befa5390680661a7b9f2248c7819b4a85c
DIST VirtualBox-5.0.20.tar.bz2 111231246 SHA256 af9c0787aae22964a1192cefbf9aa91a40c1d41e5fea485adebf09ab922d4c2b SHA512 a039455eed3715b9aa42e2dc6b65ea68b27899c0bcf0065a93c53d1093cce56ebf8a6982cd804208ef9e51794eab9c5c4f3b20550d41532fd4addbd7afda0f8e WHIRLPOOL f74f0a910e5e3f7b1704f57e9831f88b1036efbc61e3b97779f5b2a337ad70d55638b59f356c769d4b6bfd5955348d490f5080b04a3f494f25eb176944756cfd
+DIST VirtualBox-5.1.6.tar.bz2 114669517 SHA256 2e0112b0d85841587b8f212e6ba8f6c35b31e1cce6b6999497dc917cd37e6911 SHA512 7b10c203692a091b3de8dda147b386e17fa7d2bdb56031163e0551e54c1ff6a8e953361d51cc6f7bb6978544a6517e843b446e866aa1fa6f96b4677dda27daa4 WHIRLPOOL ba6ea523dc06622854b304b408f2ce402d164ae4dbc5eeb4cc675c3e4c7d8e12db1a3bcee7d19f67d274ff92b32e143c111d5d732b463c48d72d4036910ce141
+DIST VirtualBox-5.1.8.tar.bz2 114688166 SHA256 e447031de468aee746529b2cf60768922f9beff22a13c54284aa430f5e925933 SHA512 178299173ee0062e23aee779faa893a42815d17163eab9ba2ed8b46be63a7110fe1690792de21514dc05ccd5a1752ea0f11357220e0e6f91f101dea3416e819c WHIRLPOOL 20ea8d253d177fd11c4349656aaa0f87f0fb76018511b345e85800d4dd8ab1e2e05c300a1f932670e5f5fac6ea547bfaa0a52b8526c4f363358911c770444a81
diff --git a/x11-drivers/xf86-video-virtualbox/files/xf86-video-virtualbox-5.1.4-Makefile.module.kms.patch b/x11-drivers/xf86-video-virtualbox/files/xf86-video-virtualbox-5.1.4-Makefile.module.kms.patch
new file mode 100644
index 00000000..f34ac66
--- /dev/null
+++ b/x11-drivers/xf86-video-virtualbox/files/xf86-video-virtualbox-5.1.4-Makefile.module.kms.patch
@@ -0,0 +1,11 @@
+--- a/src/VBox/Additions/linux/drm/Makefile.module.kms
++++ b/src/VBox/Additions/linux/drm/Makefile.module.kms
+@@ -43,7 +43,7 @@ else
+ MANGLING := $(KBUILD_EXTMOD)/include/VBox/VBoxGuestMangling.h
+ endif
+ MOD_CFLAGS = -Wno-declaration-after-statement -fshort-wchar -include $(MANGLING) -fno-pie
+-MOD_INCL = $(addprefix -I$(KBUILD_EXTMOD),/ /include)
++MOD_INCL = $(addprefix -I$(KBUILD_EXTMOD),/ /include /r0drv/linux)
+ # What on earth is this?
+ MOD_INCL += $(addprefix -I$(KBUILD_EXTMOD)/vboxvideo,/ /include)
+ MOD_INCL += -Iinclude/drm
diff --git a/x11-drivers/xf86-video-virtualbox/xf86-video-virtualbox-5.1.6.ebuild b/x11-drivers/xf86-video-virtualbox/xf86-video-virtualbox-5.1.6.ebuild
new file mode 100644
index 00000000..780bd87
--- /dev/null
+++ b/x11-drivers/xf86-video-virtualbox/xf86-video-virtualbox-5.1.6.ebuild
@@ -0,0 +1,220 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=6
+
+PYTHON_COMPAT=( python2_7 )
+inherit eutils linux-mod multilib python-single-r1 versionator toolchain-funcs
+
+MY_PV="${PV/beta/BETA}"
+MY_PV="${MY_PV/rc/RC}"
+MY_P=VirtualBox-${MY_PV}
+DESCRIPTION="VirtualBox video driver"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="dri"
+
+RDEPEND=">=x11-base/xorg-server-1.7:=[-minimal]
+ x11-libs/libXcomposite"
+DEPEND="${RDEPEND}
+ >=dev-util/kbuild-0.1.9998_pre20131130
+ ${PYTHON_DEPS}
+ >=dev-lang/yasm-0.6.2
+ >=sys-devel/gcc-4.9.0
+ sys-power/iasl
+ x11-proto/fontsproto
+ x11-proto/randrproto
+ x11-proto/renderproto
+ x11-proto/resourceproto
+ x11-proto/scrnsaverproto
+ x11-proto/xextproto
+ x11-proto/xineramaproto
+ x11-proto/xproto
+ x11-libs/libXdmcp
+ x11-libs/libXau
+ x11-libs/libX11
+ x11-libs/libXfixes
+ x11-libs/libXext
+ dri? ( x11-proto/xf86driproto
+ >=x11-libs/libdrm-2.4.5 )"
+
+REQUIRED_USE=( "${PYTHON_REQUIRED_USE}" )
+
+BUILD_TARGETS="all"
+BUILD_TARGET_ARCH="${ARCH}"
+S="${WORKDIR}/${MY_P}"
+MODULES_SRC_DIR="${S}/src/VBox/Additions/linux/drm"
+MODULE_NAMES="vboxvideo(misc:${MODULES_SRC_DIR}:${MODULES_SRC_DIR})"
+
+PATCHES=(
+ # Ugly hack to build the opengl part of the video driver
+ "${FILESDIR}/${PN}-2.2.0-enable-opengl.patch"
+
+ # unset useless/problematic checks in configure
+ "${FILESDIR}/${PN}-5.0.0_beta3-configure_checks.patch"
+)
+
+QA_TEXTRELS_x86="usr/lib/VBoxOGL.so"
+
+pkg_setup() {
+ if [ "${MERGE_TYPE}" != "binary" ]; then
+ version_is_at_least 4.9 $(gcc-version) || die "Please set gcc 4.9 or higher as active in gcc-config to build ${PN}"
+ fi
+
+ CONFIG_CHECK="~DRM ~DRM_TTM"
+ linux-mod_pkg_setup
+ BUILD_PARAMS="KERN_DIR=${KV_OUT_DIR} KERNOUT=${KV_OUT_DIR}"
+
+ python-single-r1_pkg_setup
+}
+
+src_prepare() {
+ # Prepare the vboxvideo_drm Makefiles and build dir
+ eapply "${FILESDIR}"/${PN}-5.1.4-Makefile.module.kms.patch
+
+ # Remove shipped binaries (kBuild,yasm), see bug #232775
+ rm -r kBuild/bin tools || die
+
+ # Disable things unused or splitted into separate ebuilds
+ cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
+
+ # Remove pointless GCC version limitations in check_gcc()
+ sed -e "/\s*-o\s*\\\(\s*\$cc_maj\s*-eq\s*[5-9]\s*-a\s*\$cc_min\s*-gt\s*[0-5]\s*\\\)\s*\\\/d" \
+ -i configure || die
+
+ default
+
+ # link with lazy on hardened #394757
+ sed '/^TEMPLATE_VBOXR3EXE_LDFLAGS.linux/s/$/ -Wl,-z,lazy/' \
+ -i Config.kmk || die
+}
+
+src_configure() {
+ # build the user-space tools, warnings are harmless
+ local cmd=(
+ ./configure
+ --nofatal
+ --disable-xpcom
+ --disable-sdl-ttf
+ --disable-pulse
+ --disable-alsa
+ --with-gcc="$(tc-getCC)"
+ --with-g++="$(tc-getCXX)"
+ --target-arch=${ARCH}
+ --with-linux="${KV_OUT_DIR}"
+ --build-headless
+ )
+ echo "${cmd[@]}"
+ "${cmd[@]}" || die "configure failed"
+ source ./env.sh
+ export VBOX_GCC_OPT="${CFLAGS} ${CPPFLAGS}"
+}
+
+src_compile() {
+ local each targets=(
+ Runtime
+ Additions/common/VBoxGuestLib
+ GuestHost/OpenGL
+ Additions/x11/x11stubs
+ Additions/common/crOpenGL
+ Additions/x11/vboxvideo
+ )
+
+ # need to use the upstream build system to create necessary objects properly
+ use dri && targets+=( Additions/linux/drm )
+
+ for each in ${targets[@]} ; do
+ pushd "${S}"/src/VBox/${each} $>/dev/null || die
+ MAKE="kmk" \
+ emake TOOL_YASM_AS=yasm \
+ VBOX_USE_SYSTEM_XORG_HEADERS=1 \
+ KBUILD_PATH="${S}/kBuild" \
+ KBUILD_VERBOSE=2
+ popd &>/dev/null || die
+ done
+
+ if use dri; then
+ local objdir="out/linux.${ARCH}/release/obj/vboxvideo_drm"
+ # We need a Makefile, so use Makefile.module.kms
+ ln -s Makefile.module.kms "${MODULES_SRC_DIR}"/Makefile || die
+ # All of these are expected to be in $(KBUILD_EXTMOD)/ so symlink them into place
+ targets=(
+ include
+ src/VBox/Runtime/r0drv
+ src/VBox/Installer/linux/Makefile.include.{head,foot}er
+ out/linux.${ARCH}/release/{product,version,revision}-generated.h
+ )
+ for each in ${targets[@]} ; do
+ ln -s "${S}"/${each} \
+ "${MODULES_SRC_DIR}"/${each##*/} || die
+ done
+ # see the vboxvideo_drm_SOURCES list in Makefile.kmk for the below,
+ # and replace '..' with 'dt'
+ targets=(
+ dt/dt/common/VBoxVideo/HGSMIBase.o
+ dt/dt/common/VBoxVideo/Modesetting.o
+ dt/dt/common/VBoxVideo/VBVABase.o
+ dt/dt/dt/GuestHost/HGSMI/HGSMICommon.o
+ dt/dt/dt/GuestHost/HGSMI/HGSMIMemAlloc.o
+ dt/dt/dt/Runtime/common/alloc/heapoffset.o
+ )
+ for each in ${targets[@]} ; do
+ ln -s "${S}"/${objdir}/${each} \
+ "${MODULES_SRC_DIR}" || die
+ ln -s "${S}"/${objdir}/${each}.dep \
+ "${MODULES_SRC_DIR}" || die
+ done
+
+ # Now creating the kernel modules. We must do this _after_
+ # we compiled the user-space tools as we need two of the
+ # automatically generated header files. (>=3.2.0)
+ pushd "${MODULES_SRC_DIR}" &>/dev/null || die
+ linux-mod_src_compile
+ popd &>/dev/null || die
+ fi
+}
+
+src_install() {
+ if use dri; then
+ pushd "${MODULES_SRC_DIR}" &>/dev/null || die
+ linux-mod_src_install
+ popd &>/dev/null || die
+ fi
+
+ cd "${S}/out/linux.${ARCH}/release/bin/additions" || die
+ insinto /usr/$(get_libdir)/xorg/modules/drivers
+ newins vboxvideo_drv_system.so vboxvideo_drv.so
+
+ # Guest OpenGL driver
+ insinto /usr/$(get_libdir)
+ doins -r VBoxOGL*
+
+ if use dri ; then
+ dosym /usr/$(get_libdir)/VBoxOGL.so \
+ /usr/$(get_libdir)/dri/vboxvideo_dri.so
+ fi
+}
+
+pkg_postinst() {
+ elog "You need to edit the file /etc/X11/xorg.conf and set:"
+ elog ""
+ elog " Driver \"vboxvideo\""
+ elog ""
+ elog "in the Graphics device section (Section \"Device\")"
+ elog ""
+ if use dri; then
+ elog "To use the kernel drm video driver, please add:"
+ elog "\"${MODULE_NAMES%(*}\" to:"
+ if has_version sys-apps/openrc ; then
+ elog "/etc/conf.d/modules"
+ else
+ elog "/etc/modules.autoload.d/kernel-${KV_MAJOR}.${KV_MINOR}"
+ fi
+ elog ""
+ fi
+}
diff --git a/x11-drivers/xf86-video-virtualbox/xf86-video-virtualbox-5.1.8.ebuild b/x11-drivers/xf86-video-virtualbox/xf86-video-virtualbox-5.1.8.ebuild
new file mode 100644
index 00000000..780bd87
--- /dev/null
+++ b/x11-drivers/xf86-video-virtualbox/xf86-video-virtualbox-5.1.8.ebuild
@@ -0,0 +1,220 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=6
+
+PYTHON_COMPAT=( python2_7 )
+inherit eutils linux-mod multilib python-single-r1 versionator toolchain-funcs
+
+MY_PV="${PV/beta/BETA}"
+MY_PV="${MY_PV/rc/RC}"
+MY_P=VirtualBox-${MY_PV}
+DESCRIPTION="VirtualBox video driver"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="dri"
+
+RDEPEND=">=x11-base/xorg-server-1.7:=[-minimal]
+ x11-libs/libXcomposite"
+DEPEND="${RDEPEND}
+ >=dev-util/kbuild-0.1.9998_pre20131130
+ ${PYTHON_DEPS}
+ >=dev-lang/yasm-0.6.2
+ >=sys-devel/gcc-4.9.0
+ sys-power/iasl
+ x11-proto/fontsproto
+ x11-proto/randrproto
+ x11-proto/renderproto
+ x11-proto/resourceproto
+ x11-proto/scrnsaverproto
+ x11-proto/xextproto
+ x11-proto/xineramaproto
+ x11-proto/xproto
+ x11-libs/libXdmcp
+ x11-libs/libXau
+ x11-libs/libX11
+ x11-libs/libXfixes
+ x11-libs/libXext
+ dri? ( x11-proto/xf86driproto
+ >=x11-libs/libdrm-2.4.5 )"
+
+REQUIRED_USE=( "${PYTHON_REQUIRED_USE}" )
+
+BUILD_TARGETS="all"
+BUILD_TARGET_ARCH="${ARCH}"
+S="${WORKDIR}/${MY_P}"
+MODULES_SRC_DIR="${S}/src/VBox/Additions/linux/drm"
+MODULE_NAMES="vboxvideo(misc:${MODULES_SRC_DIR}:${MODULES_SRC_DIR})"
+
+PATCHES=(
+ # Ugly hack to build the opengl part of the video driver
+ "${FILESDIR}/${PN}-2.2.0-enable-opengl.patch"
+
+ # unset useless/problematic checks in configure
+ "${FILESDIR}/${PN}-5.0.0_beta3-configure_checks.patch"
+)
+
+QA_TEXTRELS_x86="usr/lib/VBoxOGL.so"
+
+pkg_setup() {
+ if [ "${MERGE_TYPE}" != "binary" ]; then
+ version_is_at_least 4.9 $(gcc-version) || die "Please set gcc 4.9 or higher as active in gcc-config to build ${PN}"
+ fi
+
+ CONFIG_CHECK="~DRM ~DRM_TTM"
+ linux-mod_pkg_setup
+ BUILD_PARAMS="KERN_DIR=${KV_OUT_DIR} KERNOUT=${KV_OUT_DIR}"
+
+ python-single-r1_pkg_setup
+}
+
+src_prepare() {
+ # Prepare the vboxvideo_drm Makefiles and build dir
+ eapply "${FILESDIR}"/${PN}-5.1.4-Makefile.module.kms.patch
+
+ # Remove shipped binaries (kBuild,yasm), see bug #232775
+ rm -r kBuild/bin tools || die
+
+ # Disable things unused or splitted into separate ebuilds
+ cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
+
+ # Remove pointless GCC version limitations in check_gcc()
+ sed -e "/\s*-o\s*\\\(\s*\$cc_maj\s*-eq\s*[5-9]\s*-a\s*\$cc_min\s*-gt\s*[0-5]\s*\\\)\s*\\\/d" \
+ -i configure || die
+
+ default
+
+ # link with lazy on hardened #394757
+ sed '/^TEMPLATE_VBOXR3EXE_LDFLAGS.linux/s/$/ -Wl,-z,lazy/' \
+ -i Config.kmk || die
+}
+
+src_configure() {
+ # build the user-space tools, warnings are harmless
+ local cmd=(
+ ./configure
+ --nofatal
+ --disable-xpcom
+ --disable-sdl-ttf
+ --disable-pulse
+ --disable-alsa
+ --with-gcc="$(tc-getCC)"
+ --with-g++="$(tc-getCXX)"
+ --target-arch=${ARCH}
+ --with-linux="${KV_OUT_DIR}"
+ --build-headless
+ )
+ echo "${cmd[@]}"
+ "${cmd[@]}" || die "configure failed"
+ source ./env.sh
+ export VBOX_GCC_OPT="${CFLAGS} ${CPPFLAGS}"
+}
+
+src_compile() {
+ local each targets=(
+ Runtime
+ Additions/common/VBoxGuestLib
+ GuestHost/OpenGL
+ Additions/x11/x11stubs
+ Additions/common/crOpenGL
+ Additions/x11/vboxvideo
+ )
+
+ # need to use the upstream build system to create necessary objects properly
+ use dri && targets+=( Additions/linux/drm )
+
+ for each in ${targets[@]} ; do
+ pushd "${S}"/src/VBox/${each} $>/dev/null || die
+ MAKE="kmk" \
+ emake TOOL_YASM_AS=yasm \
+ VBOX_USE_SYSTEM_XORG_HEADERS=1 \
+ KBUILD_PATH="${S}/kBuild" \
+ KBUILD_VERBOSE=2
+ popd &>/dev/null || die
+ done
+
+ if use dri; then
+ local objdir="out/linux.${ARCH}/release/obj/vboxvideo_drm"
+ # We need a Makefile, so use Makefile.module.kms
+ ln -s Makefile.module.kms "${MODULES_SRC_DIR}"/Makefile || die
+ # All of these are expected to be in $(KBUILD_EXTMOD)/ so symlink them into place
+ targets=(
+ include
+ src/VBox/Runtime/r0drv
+ src/VBox/Installer/linux/Makefile.include.{head,foot}er
+ out/linux.${ARCH}/release/{product,version,revision}-generated.h
+ )
+ for each in ${targets[@]} ; do
+ ln -s "${S}"/${each} \
+ "${MODULES_SRC_DIR}"/${each##*/} || die
+ done
+ # see the vboxvideo_drm_SOURCES list in Makefile.kmk for the below,
+ # and replace '..' with 'dt'
+ targets=(
+ dt/dt/common/VBoxVideo/HGSMIBase.o
+ dt/dt/common/VBoxVideo/Modesetting.o
+ dt/dt/common/VBoxVideo/VBVABase.o
+ dt/dt/dt/GuestHost/HGSMI/HGSMICommon.o
+ dt/dt/dt/GuestHost/HGSMI/HGSMIMemAlloc.o
+ dt/dt/dt/Runtime/common/alloc/heapoffset.o
+ )
+ for each in ${targets[@]} ; do
+ ln -s "${S}"/${objdir}/${each} \
+ "${MODULES_SRC_DIR}" || die
+ ln -s "${S}"/${objdir}/${each}.dep \
+ "${MODULES_SRC_DIR}" || die
+ done
+
+ # Now creating the kernel modules. We must do this _after_
+ # we compiled the user-space tools as we need two of the
+ # automatically generated header files. (>=3.2.0)
+ pushd "${MODULES_SRC_DIR}" &>/dev/null || die
+ linux-mod_src_compile
+ popd &>/dev/null || die
+ fi
+}
+
+src_install() {
+ if use dri; then
+ pushd "${MODULES_SRC_DIR}" &>/dev/null || die
+ linux-mod_src_install
+ popd &>/dev/null || die
+ fi
+
+ cd "${S}/out/linux.${ARCH}/release/bin/additions" || die
+ insinto /usr/$(get_libdir)/xorg/modules/drivers
+ newins vboxvideo_drv_system.so vboxvideo_drv.so
+
+ # Guest OpenGL driver
+ insinto /usr/$(get_libdir)
+ doins -r VBoxOGL*
+
+ if use dri ; then
+ dosym /usr/$(get_libdir)/VBoxOGL.so \
+ /usr/$(get_libdir)/dri/vboxvideo_dri.so
+ fi
+}
+
+pkg_postinst() {
+ elog "You need to edit the file /etc/X11/xorg.conf and set:"
+ elog ""
+ elog " Driver \"vboxvideo\""
+ elog ""
+ elog "in the Graphics device section (Section \"Device\")"
+ elog ""
+ if use dri; then
+ elog "To use the kernel drm video driver, please add:"
+ elog "\"${MODULE_NAMES%(*}\" to:"
+ if has_version sys-apps/openrc ; then
+ elog "/etc/conf.d/modules"
+ else
+ elog "/etc/modules.autoload.d/kernel-${KV_MAJOR}.${KV_MINOR}"
+ fi
+ elog ""
+ fi
+}
^ permalink raw reply related [flat|nested] 6+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: app-emulation/virtualbox-guest-additions/, ...
@ 2015-10-20 21:42 Lars Wendler
0 siblings, 0 replies; 6+ messages in thread
From: Lars Wendler @ 2015-10-20 21:42 UTC (permalink / raw
To: gentoo-commits
commit: cfd1de93f63860c05717ad11812cf1075a808f41
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Tue Oct 20 21:37:39 2015 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Tue Oct 20 21:42:21 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=cfd1de93
virtualbox packages: Bump to version 5.0.8
Package-Manager: portage-2.2.23
Signed-off-by: Lars Wendler <polynomial-c <AT> gentoo.org>
app-emulation/virtualbox-additions/Manifest | 1 +
.../virtualbox-additions-5.0.8.ebuild | 36 ++
app-emulation/virtualbox-bin/Manifest | 4 +
.../virtualbox-bin-5.0.8.103449.ebuild | 357 +++++++++++++++++
app-emulation/virtualbox-extpack-oracle/Manifest | 1 +
.../virtualbox-extpack-oracle-5.0.8.103449.ebuild | 43 ++
app-emulation/virtualbox-guest-additions/Manifest | 1 +
.../virtualbox-guest-additions-5.0.8.ebuild | 212 ++++++++++
app-emulation/virtualbox-modules/Manifest | 1 +
.../virtualbox-modules-5.0.8.ebuild | 59 +++
app-emulation/virtualbox/Manifest | 1 +
app-emulation/virtualbox/virtualbox-5.0.8.ebuild | 433 +++++++++++++++++++++
x11-drivers/xf86-video-virtualbox/Manifest | 1 +
.../xf86-video-virtualbox-5.0.8.ebuild | 169 ++++++++
14 files changed, 1319 insertions(+)
diff --git a/app-emulation/virtualbox-additions/Manifest b/app-emulation/virtualbox-additions/Manifest
index c002fb8..413a212 100644
--- a/app-emulation/virtualbox-additions/Manifest
+++ b/app-emulation/virtualbox-additions/Manifest
@@ -2,3 +2,4 @@ DIST VBoxGuestAdditions_4.3.28.iso 58241024 SHA256 9f52e186d6c9407b2676d4b2ed1cd
DIST VBoxGuestAdditions_4.3.30.iso 58257408 SHA256 432c2da1d9a939de7ba1d2cfb10595031374af9ce66417a43979d1794beedbb1 SHA512 a782e47381b708aee8a8f2c1d6608d51d09a2fb0d55ea3b543530a31cbf489043f05d4c334a9e269b922318339cb78a897603b8bce2749fe02088a6e9a4fd177 WHIRLPOOL c70b9e630820f7be38e38fd7ce20073c3766758950f60367a3a6e666644f10baadbfb5a9dc67c7c8364770e7ae28d27d632c53699fd6d1102bf672672419f1f2
DIST VBoxGuestAdditions_5.0.4.iso 58793984 SHA256 de4abc28832d4e96b826efef3e7e69e69d6b941babfdc6317185f1fd6e22ffcf SHA512 c35561b5e332a7cf815c672111fe937ebe9ed5297853b3577fb347437e3b11a9ef3f19eb00318f277560644f49c858e1e12657b5d4c3a02cd91c8d2339e08545 WHIRLPOOL f3520bbcb939d1503c00954a59e0c31b502303450cc0c6f8c067e67501bf4015938d0fccd453e29650dc9b587ab9c4b3a190321d42803fac73d3435da91d38f2
DIST VBoxGuestAdditions_5.0.6.iso 58966016 SHA256 59ed9911c2bb22357345448c3df6104938b45fa780311d20c330e39c6e309991 SHA512 8d9252b4961da760e71a94acd0292f23373b6ef2f9cfee48053efffbc9ec8f396a71f87e48eedf36f73c884774f1898567e2eeb454f4d343f85973d3b548b85f WHIRLPOOL 73164707e2e5aed992080ea80479d885383be47918e11ba387fb8f9ba7d1db585e3fcaf14ec904cc02af7b05cc00cf0a540ef9ae14adeb877a4f5f7d196e8aa8
+DIST VBoxGuestAdditions_5.0.8.iso 58992640 SHA256 a6ab45a043e460c87f145ec626c1cc2a1ae74222f15aa725004cdc84bf48e9f3 SHA512 8a808b964b916930748cdde96cbf0b3657506758155336b5d7a294cde28129cff50ec5e88fdd5e0c3bad8a5df99e8244c08677811aa4e3982f4255273d66820a WHIRLPOOL a2fe1cb6c334f44a4dd962a0479b1a2956ebd9a9d5aee9c6a3a2203c22a1f764aa1829f1a813d14f60cfdebef27ddb59c554a0db50b18641df2da6a1d67d20c5
diff --git a/app-emulation/virtualbox-additions/virtualbox-additions-5.0.8.ebuild b/app-emulation/virtualbox-additions/virtualbox-additions-5.0.8.ebuild
new file mode 100644
index 0000000..e46434c
--- /dev/null
+++ b/app-emulation/virtualbox-additions/virtualbox-additions-5.0.8.ebuild
@@ -0,0 +1,36 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit eutils
+
+MY_PN=VBoxGuestAdditions
+MY_PV="${PV/beta/BETA}"
+MY_PV="${MY_PV/rc/RC}"
+MY_P=${MY_PN}_${MY_PV}
+
+DESCRIPTION="CD image containing guest additions for VirtualBox"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}.iso"
+
+LICENSE="GPL-2+ LGPL-2.1+ MIT SGI-B-2.0 CDDL"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE=""
+RESTRICT="mirror"
+
+RDEPEND="!app-emulation/virtualbox-bin
+ !=app-emulation/virtualbox-9999"
+
+S="${WORKDIR}"
+
+src_unpack() {
+ return 0
+}
+
+src_install() {
+ insinto /usr/share/${PN/-additions}
+ newins "${DISTDIR}"/${MY_P}.iso ${MY_PN}.iso
+}
diff --git a/app-emulation/virtualbox-bin/Manifest b/app-emulation/virtualbox-bin/Manifest
index dd3a7c9..e4d4d68 100644
--- a/app-emulation/virtualbox-bin/Manifest
+++ b/app-emulation/virtualbox-bin/Manifest
@@ -2,6 +2,7 @@ DIST Oracle_VM_VirtualBox_Extension_Pack-4.3.28-100309.tar.gz 15961939 SHA256 72
DIST Oracle_VM_VirtualBox_Extension_Pack-4.3.30-101610.tar.gz 15983777 SHA256 770d49247976f2a0d14a66196dddf864c6b9d185671e2a29cab459fc28f105db SHA512 f5d8275fe3e1ea60e8d15af3b0c7382faab172df39369c8904ff734a5105daed87a48215880b2e286c6735ead341c237d2260e6ee923f513818f85cf0b452def WHIRLPOOL 3b1e29a44413ebc65dc250b2366b1fe75d6ea48fd94b722c8ec9eb7e97e6981470e9201c9840d566953c9c9bdd4a7893f9d525b3fac7150ca24391f696bba9c4
DIST Oracle_VM_VirtualBox_Extension_Pack-5.0.4-102546.tar.gz 16874455 SHA256 e4618e7847eff7c31426f4639bcd83c37bd817147081d3218f21c8e7b6bc7cfa SHA512 1b645422966a2e90b2d2af9187e756d90cb5307db70718cb6e6679426da2d43ec5e398e6ab082195b7a4ad302bb626ad2101c3237759481177db2104bf8b6a23 WHIRLPOOL 6cdb3a63ea0a8d2ce3952d3613fcea3af1e104b1e09d8167bf2c78cb52e3a1c49db669cbeebdc54c9140c36b77c20970b666aa0f6f3d9af43b2b543251288f46
DIST Oracle_VM_VirtualBox_Extension_Pack-5.0.6-103037.tar.gz 16874845 SHA256 4eed4f3d253bffe4ce61ee9431d79cbe1f897b3583efc2ff3746f453450787b5 SHA512 fb3fb06e88cc5bded6246375727df2deebb6c0dbb889b8516e0bab0af0c05ef3e1baa8c1eb94d34af2e63600bc36814eab8d8f25abb0fd1ad982ea242f456468 WHIRLPOOL 51ddd27d61e214cb41c5d8c50b0d5d01f885f4ae9facabd3cece500fd41b2a72d42b6ad766aa52e9c315c6fca2dca0f07a1a6b1fa0dc2b87f2cd3c4bf1e54aaa
+DIST Oracle_VM_VirtualBox_Extension_Pack-5.0.8-103449.tar.gz 16880584 SHA256 febd2c99909cb932a98c2b9f73ce8eb03fc183c8c8f2fc874985cf3d598f6b94 SHA512 6a29aa1c52b460bded6e342cc66bb28d93f7f4c71eb108854dd2ba6934ae399e6ee7bd8acd29dda934f2933eb05b2e3878568fee76e5eb55ae43a695123568df WHIRLPOOL d6865e702c787c441da30a49e5aaff818a7530f2a82313c326a509cb3bb98f7cf22d511e3265b99a14402b2b9a7c4614d40ed570e6a6ba5522f4752248e2f338
DIST VirtualBox-4.3.28-100309-Linux_amd64.run 85677523 SHA256 8c862533f876dc32fbfae993597b1123e2feac81a302c60e73b7ee891e17a77f SHA512 75dc2cd257b187b0a497b87c2f1e576a57ceece290327a98804c903810522444b0a64a704bc51a25945dbaa5c0caf30898ba258829577e2f17f7c736fcf59bb0 WHIRLPOOL c8d5d885807ad633bf1c4c6f98cac8dddf4002dc2e21ed2d2fb2f0a859f447b7ce06d1c49c4daff4147b25ca4992da14b6b75b39f47075c861732e6ef00091d1
DIST VirtualBox-4.3.28-100309-Linux_x86.run 85083598 SHA256 aeb224d7136314865db8175db665408a3dc08f50ed68fbd4bf1568b32b7ea2f6 SHA512 110e20a45657c7677fcab0158d31052c909893b8f618adad2a2c95ad119d47d7c35d4aedf3692dd650fda62ba0747acf202364c14034e5c10d17cd45a9918707 WHIRLPOOL 35c97248985d11c77194ac03448357331e08b7ef64a77ba416564b6051eaf74ffb5a0acdf835bfcf71657c5fdd58066947b0ba1c42e91d34dbf026434f662f67
DIST VirtualBox-4.3.30-101610-Linux_amd64.run 81069522 SHA256 5745bc9b1edd1d7d28f81ba7fed7fff3ed0bbe7084c39a77bd305018ad0a420d SHA512 928dc5b6b9031892f9391ded3aa10b090a9312c16e5b8bd4d0457d3af3d5f5495323e48a5cc781411c14318aab5d3856de5369bbf1ac3b75068797ef4c5445a7 WHIRLPOOL bf5175a228ddef4319f6972dadefa035dc0902b290691ba14478f10fe89947fbc3f9545b65d4c09f397c06309fb01a7fab6187b5f9f9d2cb39b9f808b0bb5bb5
@@ -10,7 +11,10 @@ DIST VirtualBox-5.0.4-102546-Linux_amd64.run 84254161 SHA256 d9c4a166aa350ca26a9
DIST VirtualBox-5.0.4-102546-Linux_x86.run 83373516 SHA256 cbb5f4e464645fd98c21b15013a97ab2f333496f374ddba03e9df469f7382fe4 SHA512 65ac5ea3fe2a1dbb957bcd02cd5e23130659e1eae599218d85cf8b5d2eea3afa08dd6b69d4a58e399f92f149503a3dcadb9b7e2b10fa1c70c3921baed5370fe8 WHIRLPOOL 14f8d8fd8f8c113ce930254bd2c677a8cdbf8eab3afad8a12902083d01c554336a804e8ba8c47905d4a0be3c9acd2cfe4307343f8d3a8c814611028c12b6cb2f
DIST VirtualBox-5.0.6-103037-Linux_amd64.run 84407761 SHA256 938b7b247e3260cc148f17a34f47c3363d377fd9e47add1635570908bedaf4a4 SHA512 87b4e1eb5896a87fc5004c09281d7f963dc3f07cf7405be48082a6f24225f3052577ec9c21f157cafe6f0188371142643723714d7f586a814f9e549cace480b1 WHIRLPOOL ec066521a2f73e02578e0528fabbab691bd1d196cf7bd764cdf3fa6f4f0429683320a45a1e7fc23f9f6a6ddfb8024367945f2ae75d2c7c20e609788b8e5a5a2b
DIST VirtualBox-5.0.6-103037-Linux_x86.run 83527117 SHA256 557992579e2abca01e6a3b22d779174192fa3f7b037230fd1d47bfd70d52cbc5 SHA512 8611733e6ddd5903b29221172f530887c659f96b1a317c0dcff40a2184f299c26b53e77fd61e5bb0e6475082453c7d30191f6e195942ed31f43fa6b72353edee WHIRLPOOL 4bba29189ccaecfc88347a1015abb3dd888222d65b2a6e45a453871af7c7d5fe86702e1cd7ec655793d79139828cfb35ee4424a16a940f41215708f6ed0907ed
+DIST VirtualBox-5.0.8-103449-Linux_amd64.run 84540882 SHA256 91bea0393f0b0afdc139660f23d77512723d367446d482545ded2eeeaba851d0 SHA512 5ab4d98070ba062cdacd88f60454333bdfa416fe0065978d3358fe1aaa7bb839f4a940630e9bb2f0e114879f2a839e3e1daf6d5000d11094c56951decda5babf WHIRLPOOL 915e6c7f30012087d9e37283fe3f073b9119aaadfb8a996899d9201003a8b30a490a5ecd9c61e3c919e957cda5ba9483df15d59d7ea2a13b600818ec9cc5f9d4
+DIST VirtualBox-5.0.8-103449-Linux_x86.run 83752397 SHA256 3b18e5bb5cde12d4d91add03c500862292cf44a4d4e9831ab8668312644562f8 SHA512 d4b7d602ebfc93df92f6dd4b3e050ab765c2f0caf7bbf0b85e674f8a349f9fe6c878777e85fffb3b74888252dd94c7c3d0447e6463ac2d6d39af3a20a67f7397 WHIRLPOOL 94cdd4d5f1b4504ab681aa511cbb2befcf1cebbd61b9eeec694b4758d887769b458daa20afc68a5fbadabbe97627e7c81718f17f5902f5de3e80ce6b59d3fb25
DIST VirtualBoxSDK-4.3.28-100309.zip 11698378 SHA256 fe0cc316cecb3dfe9bbb925e6c023620d4cfd8e137b2a9b9f40f22f527af16fa SHA512 6af7d2107cff080281a356cbf522961b2e9d1917e861e410b169ce5ca3cefe05cc87e4e01f78ae171f8716f7006c031f14fc01d8d282a872a4f619638049b11a WHIRLPOOL 23a77dbc410a28b2799264da88d79b2c4335c07da67dd8bf4be26cac271e3ed38a9bf4fb2966ec0a3c06fb869bb252f5fa6a34a9a9c62cbb9a2fb0ad76442f66
DIST VirtualBoxSDK-4.3.30-101610.zip 11436700 SHA256 6d8f1a006d56dfa1bbec10a35369c80c75845fdc6127c4d806b5c69cec03ab7e SHA512 2b2b3220d9ce908813699f8fc4cee80de5b29cb134ec968c2ccbb78c40b8d0d8aeb666996627f0f13cd036ef0376582c48f6c12b45acb7593d8b0eefd6eba960 WHIRLPOOL fe82cacecfedc05b6d92feac5285bc41100a9538f6cb37027c85ee08e051580243e2635af9d873c67970ecab5e8ee8eee0cee89e50be59895b44862264aa3fdf
DIST VirtualBoxSDK-5.0.4-102546.zip 9634312 SHA256 f09c428a56a10b204bba8f1cb27c3c8bd6539efd9f88e375a5894fae747d9c81 SHA512 bb06c6cb10786029b542e855bcf87f91083b3de080a367ac2a16c5c1416b10352f7bc76b416349038545499db7c17c7904747420b221d0a21ae6615c79b2cbb9 WHIRLPOOL 9afe856f0d954ea7f1faeca4748de264084897e1e85f18eedfbd585a43d115a04b22c8e8d5e998322f1936c169c83a9761f908adb839ebd070da56a390ca0327
DIST VirtualBoxSDK-5.0.6-103037.zip 9634988 SHA256 e4df6402b1ddb067f54923d211bd32bc2d6117b91295707be707bb2c8e7e408e SHA512 aee6e59a22c2ec7c99fe22054d7bdd0a5f2ed627c76b530c17fcdbd430343b20ebbbda11bce3c905ff4641d050b75f989f84ed49507ad4dca4c47364b8eda0f7 WHIRLPOOL c4e5f8aac4c0d885f78dfea562375a16157553148480bf441378f15569287fbd28f5a44b2d18ad6e393a1ede9cb907ad750c003ba61346d88279484ad944688a
+DIST VirtualBoxSDK-5.0.8-103449.zip 9635495 SHA256 c79826d184058701d0d2dbd345b7f188cee5dcac4297895f326cc18fc1253e92 SHA512 7161e8366cc9487bcadabc4a9ed9b27df6abdbc7d3fd82b9f824cc3a3054a6840526204b4e0366962a50d54f19f528f90efcb27cd2ddbf7b9e36d27ae7a573de WHIRLPOOL 933b70e5ebf33f3512e8f25312d27ebcbd3b272f9e07e41edad60f7e3fe6dc88f3b5a9d3b00c2e6d23d2ae8ec9c2d7e6f64680678a168e4d67f94bd9d8b15b65
diff --git a/app-emulation/virtualbox-bin/virtualbox-bin-5.0.8.103449.ebuild b/app-emulation/virtualbox-bin/virtualbox-bin-5.0.8.103449.ebuild
new file mode 100644
index 0000000..be70505
--- /dev/null
+++ b/app-emulation/virtualbox-bin/virtualbox-bin-5.0.8.103449.ebuild
@@ -0,0 +1,357 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+
+inherit eutils fdo-mime gnome2 pax-utils python-r1 udev unpacker versionator
+
+MAIN_PV="$(get_version_component_range 1-3)"
+if [[ ${PV} = *_beta* ]] || [[ ${PV} = *_rc* ]] ; then
+ MY_PV="${MAIN_PV}_$(get_version_component_range 5)"
+ MY_PV="${MY_PV/beta/BETA}"
+ MY_PV="${MY_PV/rc/RC}"
+else
+ MY_PV="${MAIN_PV}"
+fi
+VBOX_BUILD_ID="$(get_version_component_range 4)"
+VBOX_PV="${MY_PV}-${VBOX_BUILD_ID}"
+MY_P="VirtualBox-${VBOX_PV}-Linux"
+# needed as sometimes the extpack gets another build ID
+EXTP_PV="${VBOX_PV}"
+EXTP_PN="Oracle_VM_VirtualBox_Extension_Pack"
+EXTP_P="${EXTP_PN}-${EXTP_PV}"
+# needed as sometimes the SDK gets another build ID
+SDK_PV="${VBOX_PV}"
+SDK_P="VirtualBoxSDK-${SDK_PV}"
+
+DESCRIPTION="Family of powerful x86 virtualization products for enterprise as well as home use"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="amd64? ( http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}_amd64.run )
+ x86? ( http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}_x86.run )
+ http://download.virtualbox.org/virtualbox/${MY_PV}/${EXTP_P}.vbox-extpack -> ${EXTP_P}.tar.gz"
+
+LICENSE="GPL-2 PUEL"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="+additions +chm headless python vboxwebsrv rdesktop-vrdp"
+RESTRICT="mirror"
+
+if [[ "${PV}" != *beta* ]] ; then
+ SRC_URI+="
+ sdk? ( http://download.virtualbox.org/virtualbox/${MY_PV}/${SDK_P}.zip )"
+ IUSE+=" sdk"
+fi
+
+DEPEND="app-arch/unzip
+ ${PYTHON_DEPS}"
+
+RDEPEND="!!app-emulation/virtualbox
+ !app-emulation/virtualbox-additions
+ ~app-emulation/virtualbox-modules-${MAIN_PV}
+ !headless? (
+ x11-libs/libXcursor
+ media-libs/libsdl[X]
+ x11-libs/libXrender
+ x11-libs/libXfixes
+ media-libs/libpng
+ x11-libs/libXi
+ x11-libs/libXrandr
+ x11-libs/libXinerama
+ x11-libs/libXft
+ media-libs/freetype
+ media-libs/fontconfig
+ x11-libs/libXext
+ dev-libs/glib
+ chm? ( dev-libs/expat )
+ )
+ x11-libs/libXt
+ dev-libs/libxml2
+ x11-libs/libXau
+ x11-libs/libX11
+ x11-libs/libXmu
+ x11-libs/libSM
+ x11-libs/libICE
+ x11-libs/libXdmcp
+ ${PYTHON_DEPS}"
+
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+S=${WORKDIR}
+
+QA_TEXTRELS_amd64="opt/VirtualBox/VBoxVMM.so"
+QA_TEXTRELS_x86="opt/VirtualBox/VBoxGuestPropSvc.so
+ opt/VirtualBox/VBoxSDL.so
+ opt/VirtualBox/VBoxDbg.so
+ opt/VirtualBox/VBoxSharedFolders.so
+ opt/VirtualBox/VBoxDD2.so
+ opt/VirtualBox/VBoxOGLrenderspu.so
+ opt/VirtualBox/VBoxPython.so
+ opt/VirtualBox/VBoxPython2_7.so
+ opt/VirtualBox/VBoxDD.so
+ opt/VirtualBox/VBoxVRDP.so
+ opt/VirtualBox/VBoxDDU.so
+ opt/VirtualBox/VBoxREM64.so
+ opt/VirtualBox/VBoxSharedClipboard.so
+ opt/VirtualBox/VBoxHeadless.so
+ opt/VirtualBox/VBoxRT.so
+ opt/VirtualBox/VRDPAuth.so
+ opt/VirtualBox/VBoxREM.so
+ opt/VirtualBox/VBoxSettings.so
+ opt/VirtualBox/VBoxKeyboard.so
+ opt/VirtualBox/VBoxSharedCrOpenGL.so
+ opt/VirtualBox/VBoxVMM.so
+ opt/VirtualBox/VirtualBox.so
+ opt/VirtualBox/VBoxOGLhosterrorspu.so
+ opt/VirtualBox/components/VBoxC.so
+ opt/VirtualBox/components/VBoxSVCM.so
+ opt/VirtualBox/VBoxREM32.so
+ opt/VirtualBox/VBoxXPCOMC.so
+ opt/VirtualBox/VBoxOGLhostcrutil.so
+ opt/VirtualBox/VBoxNetDHCP.so
+ opt/VirtualBox/VBoxGuestControlSvc.so"
+QA_PRESTRIPPED="opt/VirtualBox/VBoxDD.so
+ opt/VirtualBox/VBoxDD2.so
+ opt/VirtualBox/VBoxDDU.so
+ opt/VirtualBox/VBoxDbg.so
+ opt/VirtualBox/VBoxGuestControlSvc.so
+ opt/VirtualBox/VBoxGuestPropSvc.so
+ opt/VirtualBox/VBoxHeadless
+ opt/VirtualBox/VBoxHeadless.so
+ opt/VirtualBox/VBoxKeyboard.so
+ opt/VirtualBox/VBoxManage
+ opt/VirtualBox/VBoxNetAdpCtl
+ opt/VirtualBox/VBoxNetDHCP
+ opt/VirtualBox/VBoxNetDHCP.so
+ opt/VirtualBox/VBoxOGLhostcrutil.so
+ opt/VirtualBox/VBoxOGLhosterrorspu.so
+ opt/VirtualBox/VBoxOGLrenderspu.so
+ opt/VirtualBox/VBoxPython.so
+ opt/VirtualBox/VBoxPython2_7.so
+ opt/VirtualBox/VBoxREM.so
+ opt/VirtualBox/VBoxREM32.so
+ opt/VirtualBox/VBoxREM64.so
+ opt/VirtualBox/VBoxRT.so
+ opt/VirtualBox/VBoxSDL
+ opt/VirtualBox/VBoxSDL.so
+ opt/VirtualBox/VBoxSVC
+ opt/VirtualBox/VBoxSettings.so
+ opt/VirtualBox/VBoxSharedClipboard.so
+ opt/VirtualBox/VBoxSharedCrOpenGL.so
+ opt/VirtualBox/VBoxSharedFolders.so
+ opt/VirtualBox/VBoxTestOGL
+ opt/VirtualBox/VBoxTunctl
+ opt/VirtualBox/VBoxVMM.so
+ opt/VirtualBox/VBoxVRDP.so
+ opt/VirtualBox/VBoxXPCOM.so
+ opt/VirtualBox/VBoxXPCOMC.so
+ opt/VirtualBox/VBoxXPCOMIPCD
+ opt/VirtualBox/VRDPAuth.so
+ opt/VirtualBox/VirtualBox
+ opt/VirtualBox/VirtualBox.so
+ opt/VirtualBox/accessible/libqtaccessiblewidgets.so
+ opt/VirtualBox/components/VBoxC.so
+ opt/VirtualBox/components/VBoxSVCM.so
+ opt/VirtualBox/components/VBoxXPCOMIPCC.so
+ opt/VirtualBox/kchmviewer
+ opt/VirtualBox/libQtCoreVBox.so.4
+ opt/VirtualBox/libQtGuiVBox.so.4
+ opt/VirtualBox/libQtNetworkVBox.so.4
+ opt/VirtualBox/libQtOpenGLVBox.so.4
+ opt/VirtualBox/vboxwebsrv"
+
+PYTHON_UPDATER_IGNORE="1"
+
+src_unpack() {
+ unpack_makeself ${MY_P}_${ARCH}.run
+ unpack ./VirtualBox.tar.bz2
+
+ mkdir "${S}"/${EXTP_PN} || die
+ pushd "${S}"/${EXTP_PN} &>/dev/null || die
+ unpack ${EXTP_P}.tar.gz
+ popd &>/dev/null || die
+
+ if [[ "${PV}" != *beta* ]] && use sdk ; then
+ unpack VirtualBoxSDK-${SDK_PV}.zip
+ fi
+}
+
+src_configure() {
+ :;
+}
+
+src_compile() {
+ :;
+}
+
+src_install() {
+ # create virtualbox configurations files
+ insinto /etc/vbox
+ newins "${FILESDIR}/${PN}-config" vbox.cfg
+
+ if ! use headless ; then
+ pushd "${S}"/icons &>/dev/null || die
+ for size in * ; do
+ if [ -f "${size}/virtualbox.png" ] ; then
+ insinto "/usr/share/icons/hicolor/${size}/apps"
+ newins "${size}/virtualbox.png" ${PN}.png
+ fi
+ done
+ dodir /usr/share/pixmaps
+ cp "48x48/virtualbox.png" "${D}/usr/share/pixmaps/${PN}.png" \
+ || die
+ popd &>/dev/null || die
+
+ newmenu "${FILESDIR}"/${PN}.desktop-2 ${PN}.desktop
+ fi
+
+ pushd "${S}"/${EXTP_PN} &>/dev/null || die
+ insinto /opt/VirtualBox/ExtensionPacks/${EXTP_PN}
+ doins -r linux.${ARCH}
+ doins ExtPack* PXE-Intel.rom
+ popd &>/dev/null || die
+ rm -rf "${S}"/${EXTP_PN}
+
+ insinto /opt/VirtualBox
+ dodir /opt/bin
+
+ doins UserManual.pdf
+
+ if [[ "${PV}" != *beta* ]] && use sdk ; then
+ doins -r sdk
+ fi
+
+ if use additions; then
+ doins -r additions
+ fi
+
+ if use vboxwebsrv; then
+ doins vboxwebsrv
+ fowners root:vboxusers /opt/VirtualBox/vboxwebsrv
+ fperms 0750 /opt/VirtualBox/vboxwebsrv
+ dosym /opt/VirtualBox/VBox.sh /opt/bin/vboxwebsrv
+ newinitd "${FILESDIR}"/vboxwebsrv-initd vboxwebsrv
+ newconfd "${FILESDIR}"/vboxwebsrv-confd vboxwebsrv
+ fi
+
+ if use rdesktop-vrdp; then
+ doins rdesktop-vrdp
+ doins -r rdesktop-vrdp-keymaps
+ fperms 0750 /opt/VirtualBox/rdesktop-vrdp
+ dosym /opt/VirtualBox/rdesktop-vrdp /opt/bin/rdesktop-vrdp
+ fi
+
+ if ! use headless && use chm; then
+ doins kchmviewer VirtualBox.chm
+ fowners root:vboxusers /opt/VirtualBox/kchmviewer
+ fperms 0750 /opt/VirtualBox/kchmviewer
+ fi
+
+ # This ebuild / package supports only py2.7. Where py3 comes is unknown.
+ # The compile phase makes VBoxPython2_[4-7].so.
+ # py3 support would presumably require a binary pre-compiled by py3.
+ use python && doins VBoxPython.so VBoxPython2_7.so
+
+ rm -rf src rdesktop* deffiles install* routines.sh runlevel.sh \
+ vboxdrv.sh VBox.sh VBox.png vboxnet.sh additions VirtualBox.desktop \
+ VirtualBox.tar.bz2 LICENSE VBoxSysInfo.sh rdesktop* vboxwebsrv \
+ webtest kchmviewer VirtualBox.chm vbox-create-usb-node.sh \
+ 90-vbox-usb.fdi uninstall.sh vboxshell.py vboxdrv-pardus.py \
+ VBoxPython?_*.so
+
+ if use headless ; then
+ rm -rf VBoxSDL VirtualBox VBoxKeyboard.so
+ fi
+
+ doins -r * || die
+
+ # create symlinks for working around unsupported $ORIGIN/.. in VBoxC.so (setuid)
+ dosym /opt/VirtualBox/VBoxVMM.so /opt/VirtualBox/components/VBoxVMM.so
+ dosym /opt/VirtualBox/VBoxREM.so /opt/VirtualBox/components/VBoxREM.so
+ dosym /opt/VirtualBox/VBoxRT.so /opt/VirtualBox/components/VBoxRT.so
+ dosym /opt/VirtualBox/VBoxDDU.so /opt/VirtualBox/components/VBoxDDU.so
+ dosym /opt/VirtualBox/VBoxXPCOM.so /opt/VirtualBox/components/VBoxXPCOM.so
+
+ local each
+ for each in VBox{Manage,SVC,XPCOMIPCD,Tunctl,NetAdpCtl,NetDHCP,NetNAT,TestOGL,ExtPackHelperApp}; do
+ fowners root:vboxusers /opt/VirtualBox/${each}
+ fperms 0750 /opt/VirtualBox/${each}
+ pax-mark -m "${D}"/opt/VirtualBox/${each}
+ done
+ # VBoxNetAdpCtl and VBoxNetDHCP binaries need to be suid root in any case..
+ fperms 4750 /opt/VirtualBox/VBoxNetAdpCtl
+ fperms 4750 /opt/VirtualBox/VBoxNetDHCP
+ fperms 4750 /opt/VirtualBox/VBoxNetNAT
+
+ if ! use headless ; then
+ # Hardened build: Mark selected binaries set-user-ID-on-execution
+ for each in VBox{SDL,Headless} VirtualBox; do
+ fowners root:vboxusers /opt/VirtualBox/${each}
+ fperms 4510 /opt/VirtualBox/${each}
+ pax-mark -m "${D}"/opt/VirtualBox/${each}
+ done
+
+ dosym /opt/VirtualBox/VBox.sh /opt/bin/VirtualBox
+ dosym /opt/VirtualBox/VBox.sh /opt/bin/VBoxSDL
+ else
+ # Hardened build: Mark selected binaries set-user-ID-on-execution
+ fowners root:vboxusers /opt/VirtualBox/VBoxHeadless
+ fperms 4510 /opt/VirtualBox/VBoxHeadless
+ pax-mark -m "${D}"/opt/VirtualBox/VBoxHeadless
+ fi
+
+ exeinto /opt/VirtualBox
+ newexe "${FILESDIR}/${PN}-3-wrapper" "VBox.sh"
+ fowners root:vboxusers /opt/VirtualBox/VBox.sh
+ fperms 0750 /opt/VirtualBox/VBox.sh
+
+ dosym /opt/VirtualBox/VBox.sh /opt/bin/VBoxManage
+ dosym /opt/VirtualBox/VBox.sh /opt/bin/VBoxVRDP
+ dosym /opt/VirtualBox/VBox.sh /opt/bin/VBoxHeadless
+ dosym /opt/VirtualBox/VBoxTunctl /opt/bin/VBoxTunctl
+
+ # set an env-variable for 3rd party tools
+ echo -n "VBOX_APP_HOME=/opt/VirtualBox" > "${T}/90virtualbox"
+ doenvd "${T}/90virtualbox"
+
+ local udevdir="$(get_udevdir)"
+ insinto ${udevdir}/rules.d
+ doins "${FILESDIR}"/10-virtualbox.rules
+ sed "s@%UDEVDIR%@${udevdir}@" \
+ -i "${D}"${udevdir}/rules.d/10-virtualbox.rules || die
+ # move udev scripts into ${udevdir} (bug #372491)
+ mv "${D}"/opt/VirtualBox/VBoxCreateUSBNode.sh "${D}"${udevdir} || die
+ fperms 0750 ${udevdir}/VBoxCreateUSBNode.sh
+}
+
+pkg_postinst() {
+ fdo-mime_desktop_database_update
+
+ gnome2_icon_cache_update
+
+ udevadm control --reload-rules && udevadm trigger --subsystem-match=usb
+
+ elog ""
+ if ! use headless ; then
+ elog "To launch VirtualBox just type: \"VirtualBox\""
+ elog ""
+ fi
+ elog "You must be in the vboxusers group to use VirtualBox."
+ elog ""
+ elog "For advanced networking setups you should emerge:"
+ elog "net-misc/bridge-utils and sys-apps/usermode-utilities"
+ elog ""
+ elog "Please visit http://www.virtualbox.org/wiki/Editions for"
+ elog "an overview about the different features of ${PN}"
+ elog "and virtualbox-ose"
+ if [ -e "${ROOT}/etc/udev/rules.d/10-virtualbox.rules" ] ; then
+ elog ""
+ elog "Please remove \"${ROOT}/etc/udev/rules.d/10-virtualbox.rules\""
+ elog "or else USB in ${PN} won't work."
+ fi
+}
+
+pkg_postrm() {
+ fdo-mime_desktop_database_update
+}
diff --git a/app-emulation/virtualbox-extpack-oracle/Manifest b/app-emulation/virtualbox-extpack-oracle/Manifest
index 59c54e2..e62a6c2 100644
--- a/app-emulation/virtualbox-extpack-oracle/Manifest
+++ b/app-emulation/virtualbox-extpack-oracle/Manifest
@@ -2,3 +2,4 @@ DIST Oracle_VM_VirtualBox_Extension_Pack-4.3.28-100309.tar.gz 15961939 SHA256 72
DIST Oracle_VM_VirtualBox_Extension_Pack-4.3.30-101610.tar.gz 15983777 SHA256 770d49247976f2a0d14a66196dddf864c6b9d185671e2a29cab459fc28f105db SHA512 f5d8275fe3e1ea60e8d15af3b0c7382faab172df39369c8904ff734a5105daed87a48215880b2e286c6735ead341c237d2260e6ee923f513818f85cf0b452def WHIRLPOOL 3b1e29a44413ebc65dc250b2366b1fe75d6ea48fd94b722c8ec9eb7e97e6981470e9201c9840d566953c9c9bdd4a7893f9d525b3fac7150ca24391f696bba9c4
DIST Oracle_VM_VirtualBox_Extension_Pack-5.0.4-102546.tar.gz 16874455 SHA256 e4618e7847eff7c31426f4639bcd83c37bd817147081d3218f21c8e7b6bc7cfa SHA512 1b645422966a2e90b2d2af9187e756d90cb5307db70718cb6e6679426da2d43ec5e398e6ab082195b7a4ad302bb626ad2101c3237759481177db2104bf8b6a23 WHIRLPOOL 6cdb3a63ea0a8d2ce3952d3613fcea3af1e104b1e09d8167bf2c78cb52e3a1c49db669cbeebdc54c9140c36b77c20970b666aa0f6f3d9af43b2b543251288f46
DIST Oracle_VM_VirtualBox_Extension_Pack-5.0.6-103037.tar.gz 16874845 SHA256 4eed4f3d253bffe4ce61ee9431d79cbe1f897b3583efc2ff3746f453450787b5 SHA512 fb3fb06e88cc5bded6246375727df2deebb6c0dbb889b8516e0bab0af0c05ef3e1baa8c1eb94d34af2e63600bc36814eab8d8f25abb0fd1ad982ea242f456468 WHIRLPOOL 51ddd27d61e214cb41c5d8c50b0d5d01f885f4ae9facabd3cece500fd41b2a72d42b6ad766aa52e9c315c6fca2dca0f07a1a6b1fa0dc2b87f2cd3c4bf1e54aaa
+DIST Oracle_VM_VirtualBox_Extension_Pack-5.0.8-103449.tar.gz 16880584 SHA256 febd2c99909cb932a98c2b9f73ce8eb03fc183c8c8f2fc874985cf3d598f6b94 SHA512 6a29aa1c52b460bded6e342cc66bb28d93f7f4c71eb108854dd2ba6934ae399e6ee7bd8acd29dda934f2933eb05b2e3878568fee76e5eb55ae43a695123568df WHIRLPOOL d6865e702c787c441da30a49e5aaff818a7530f2a82313c326a509cb3bb98f7cf22d511e3265b99a14402b2b9a7c4614d40ed570e6a6ba5522f4752248e2f338
diff --git a/app-emulation/virtualbox-extpack-oracle/virtualbox-extpack-oracle-5.0.8.103449.ebuild b/app-emulation/virtualbox-extpack-oracle/virtualbox-extpack-oracle-5.0.8.103449.ebuild
new file mode 100644
index 0000000..19d40ce
--- /dev/null
+++ b/app-emulation/virtualbox-extpack-oracle/virtualbox-extpack-oracle-5.0.8.103449.ebuild
@@ -0,0 +1,43 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit eutils multilib versionator
+
+MAIN_PV="$(get_version_component_range 1-3)"
+if [[ ${PV} = *_beta* ]] || [[ ${PV} = *_rc* ]] ; then
+ MY_PV="${MAIN_PV}_$(get_version_component_range 5)"
+ DEP_PV="${MY_PV}"
+ MY_PV="${MY_PV/beta/BETA}"
+ MY_PV="${MY_PV/rc/RC}"
+else
+ MY_PV="${MAIN_PV}"
+ DEP_PV="${MAIN_PV}"
+fi
+VBOX_BUILD_ID="$(get_version_component_range 4)"
+MY_PN="Oracle_VM_VirtualBox_Extension_Pack"
+MY_P="${MY_PN}-${MY_PV}-${VBOX_BUILD_ID}"
+
+DESCRIPTION="PUEL extensions for VirtualBox"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}.vbox-extpack -> ${MY_P}.tar.gz"
+
+LICENSE="PUEL"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE=""
+RESTRICT="mirror strip"
+
+RDEPEND="~app-emulation/virtualbox-${DEP_PV}"
+
+S="${WORKDIR}"
+
+QA_PREBUILT="/usr/$(get_libdir)/virtualbox/ExtensionPacks/${MY_PN}/.*"
+
+src_install() {
+ insinto /usr/$(get_libdir)/virtualbox/ExtensionPacks/${MY_PN}
+ doins -r linux.${ARCH}
+ doins ExtPack* PXE-Intel.rom
+}
diff --git a/app-emulation/virtualbox-guest-additions/Manifest b/app-emulation/virtualbox-guest-additions/Manifest
index 8d76d9a..1fe862f 100644
--- a/app-emulation/virtualbox-guest-additions/Manifest
+++ b/app-emulation/virtualbox-guest-additions/Manifest
@@ -2,3 +2,4 @@ DIST VirtualBox-4.3.28.tar.bz2 100092002 SHA256 e157ab76d1958ae2c56b2a3875194fbf
DIST VirtualBox-4.3.30.tar.bz2 97428942 SHA256 ea9569ec16cd6202ee61bcadb2506d31ac12fd343adb91565773a05eaaea9a36 SHA512 d0817335cf4bd196da93b91ede6bc9e48ca0d471166ab2790dbf508a4574e4ace54a86053932abf3b4e804c583e80a713d2ab2e556dc15bee6ef3a62f88b95fc WHIRLPOOL 47cbd702e83cc737e04b5862cc6c52e32be244dc1dc0145f582f57b2f19bb898f0f4b200576a28f10a3290691f1ffd43c256e8c8eb5545a9723be8eefca88a38
DIST VirtualBox-5.0.4.tar.bz2 109865904 SHA256 b19e23fc8e71f38aef7c059f44e59fcbff3bb2ce85baa8de81f1629b85f68fcf SHA512 4349792390f0a236faef0bdb06806dde604373dcccf83351f805508a2fdcae9f729a5e793ac53c4d134c50e48c0624b340328a7bb21ddcf15ed69a08365eb2b5 WHIRLPOOL cacf3193231a8500a3b475ede2d0f0458a656d87d3d97b78ccb743c1606f7f6ec58f6d56cb1bc0a40e9eb279d4cbeeab3318d1e71be3dead07fe4ccff6bdfbcf
DIST VirtualBox-5.0.6.tar.bz2 109863328 SHA256 22d63f28c43165a31dcccdec1c65f376f46d7e09555c47611cfaafb5576a5843 SHA512 3e51c9476c29a3ba79adda2d3b0c0b516459f58c8aa5e7b795be1aa2468b8e61241bbe5615787d7302a5f95230a446377bd8698f801c2114b26a471ae8bbbc11 WHIRLPOOL 11603c9aa14acac87032b5d8fc1f8d0a567632ca591230e0cc5c1d9a1ae9b39ebccb1a3bb85e1845abc01b04da550a2ef889e1bf91da0bb82df1fafa384f88b4
+DIST VirtualBox-5.0.8.tar.bz2 110540476 SHA256 e043518b7ab150e478c00b622360a5feb95f4e5b19e72bfcc71174356e2dacb3 SHA512 2a8e0f3e5fbb4b45786aa48cb408cf712cd968af65b25219eb39d54274612978704359b620179d751e828783950eb29d4cf330ac408a84dd65edbd0d98e25aa4 WHIRLPOOL 2b054cdb5c7c39008e876f0703e154509f4a79183aa85c4998717ae07a72e015a71bd22dc0427c8a464b3e16db92ebe9d731971f9788fbe56c8cc936669496fe
diff --git a/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-5.0.8.ebuild b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-5.0.8.ebuild
new file mode 100644
index 0000000..a1d8560
--- /dev/null
+++ b/app-emulation/virtualbox-guest-additions/virtualbox-guest-additions-5.0.8.ebuild
@@ -0,0 +1,212 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit eutils linux-mod systemd user toolchain-funcs
+
+MY_PV="${PV/beta/BETA}"
+MY_PV="${MY_PV/rc/RC}"
+MY_P=VirtualBox-${MY_PV}
+DESCRIPTION="VirtualBox kernel modules and user-space tools for Gentoo guests"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="X"
+
+RDEPEND="X? ( ~x11-drivers/xf86-video-virtualbox-${PV}
+ x11-apps/xrandr
+ x11-apps/xrefresh
+ x11-libs/libXmu
+ x11-libs/libX11
+ x11-libs/libXt
+ x11-libs/libXext
+ x11-libs/libXau
+ x11-libs/libXdmcp
+ x11-libs/libSM
+ x11-libs/libICE
+ x11-proto/glproto )
+ sys-apps/dbus
+ !!x11-drivers/xf86-input-virtualbox"
+DEPEND="${RDEPEND}
+ >=dev-util/kbuild-0.1.9998_pre20131130
+ >=dev-lang/yasm-0.6.2
+ sys-devel/bin86
+ sys-libs/pam
+ sys-power/iasl
+ X? ( x11-proto/renderproto )
+ !X? ( x11-proto/xproto )"
+
+BUILD_TARGETS="all"
+BUILD_TARGET_ARCH="${ARCH}"
+MODULE_NAMES="vboxguest(misc:${WORKDIR}/vboxguest:${WORKDIR}/vboxguest)
+ vboxsf(misc:${WORKDIR}/vboxsf:${WORKDIR}/vboxsf)"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+ linux-mod_pkg_setup
+ BUILD_PARAMS="KERN_DIR=${KV_OUT_DIR} KERNOUT=${KV_OUT_DIR}"
+ enewgroup vboxguest
+ enewuser vboxguest -1 /bin/sh /dev/null vboxguest
+ # automount Error: VBoxServiceAutoMountWorker: Group "vboxsf" does not exist
+ enewgroup vboxsf
+}
+
+src_unpack() {
+ unpack ${A}
+
+ # Create and unpack a tarball with the sources of the Linux guest
+ # kernel modules, to include all the needed files
+ "${S}"/src/VBox/Additions/linux/export_modules "${WORKDIR}/vbox-kmod.tar.gz"
+ unpack ./vbox-kmod.tar.gz
+
+ # Remove shipped binaries (kBuild,yasm), see bug #232775
+ cd "${S}"
+ rm -rf kBuild/bin tools
+}
+
+src_prepare() {
+ # PaX fixes (see bug #298988)
+ pushd "${WORKDIR}" &>/dev/null || die
+ epatch "${FILESDIR}"/vboxguest-4.1.0-log-use-c99.patch
+ popd &>/dev/null || die
+
+ # Disable things unused or splitted into separate ebuilds
+ cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
+ use X || echo "VBOX_WITH_X11_ADDITIONS :=" >> LocalConfig.kmk
+
+ # stupid new header references...
+ for vboxheader in {product,revision,version}-generated.h ; do
+ for mdir in vbox{guest,sf} ; do
+ ln -sf "${S}"/out/linux.${ARCH}/release/${vboxheader} \
+ "${WORKDIR}/${mdir}/${vboxheader}"
+ done
+ done
+}
+
+src_configure() {
+ # build the user-space tools, warnings are harmless
+ local cmd=(
+ ./configure
+ --nofatal
+ --disable-xpcom
+ --disable-sdl-ttf
+ --disable-pulse
+ --disable-alsa
+ --with-gcc="$(tc-getCC)"
+ --with-g++="$(tc-getCXX)"
+ --target-arch=${ARCH}
+ --with-linux="${KV_OUT_DIR}"
+ --build-headless
+ )
+ echo "${cmd[@]}"
+ "${cmd[@]}" || die "configure failed"
+ source ./env.sh
+ export VBOX_GCC_OPT="${CFLAGS} ${CPPFLAGS}"
+}
+
+src_compile() {
+ MAKE="kmk" \
+ emake TOOL_YASM_AS=yasm \
+ VBOX_ONLY_ADDITIONS=1 \
+ KBUILD_VERBOSE=2
+
+ # Now creating the kernel modules. We must do this _after_
+ # we compiled the user-space tools as we need two of the
+ # automatically generated header files. (>=3.2.0)
+ linux-mod_src_compile
+}
+
+src_install() {
+ linux-mod_src_install
+
+ cd "${S}"/out/linux.${ARCH}/release/bin/additions || die
+
+ insinto /sbin
+ newins mount.vboxsf mount.vboxsf
+ fperms 4755 /sbin/mount.vboxsf
+
+ newinitd "${FILESDIR}"/${PN}-8.initd ${PN}
+
+ insinto /usr/sbin/
+ newins VBoxService vboxguest-service
+ fperms 0755 /usr/sbin/vboxguest-service
+
+ insinto /usr/bin
+ doins VBoxControl
+ fperms 0755 /usr/bin/VBoxControl
+
+ # VBoxClient user service and xrandr wrapper
+ if use X ; then
+ doins VBoxClient
+ fperms 0755 /usr/bin/VBoxClient
+
+ pushd "${S}"/src/VBox/Additions/x11/Installer &>/dev/null \
+ || die
+ newins 98vboxadd-xclient VBoxClient-all
+ fperms 0755 /usr/bin/VBoxClient-all
+ popd &>/dev/null || die
+ fi
+
+ # udev rule for vboxdrv
+ local udev_rules_dir="/lib/udev/rules.d"
+ dodir ${udev_rules_dir}
+ echo 'KERNEL=="vboxguest", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${D}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+ echo 'KERNEL=="vboxuser", OWNER="vboxguest", GROUP="vboxguest", MODE="0660"' \
+ >> "${D}/${udev_rules_dir}/60-virtualbox-guest-additions.rules" \
+ || die
+
+ # VBoxClient autostart file
+ insinto /etc/xdg/autostart
+ doins "${FILESDIR}"/vboxclient.desktop
+
+ # sample xorg.conf
+ insinto /usr/share/doc/${PF}
+ doins "${FILESDIR}"/xorg.conf.vbox
+
+ systemd_dounit "${FILESDIR}/${PN}.service"
+}
+
+pkg_postinst() {
+ linux-mod_pkg_postinst
+ if ! use X ; then
+ elog "use flag X is off, enable it to install the"
+ elog "X Window System video driver."
+ fi
+ elog ""
+ elog "Please add users to the \"vboxguest\" group so they can"
+ elog "benefit from seamless mode, auto-resize and clipboard."
+ elog ""
+ elog "The vboxsf group has been added to make automount services work."
+ elog "These services are part of the shared folders support."
+ elog ""
+ elog "Please add:"
+ elog "/etc/init.d/${PN}"
+ elog "to the default runlevel in order to start"
+ elog "needed services."
+ elog "To use the VirtualBox X driver, use the following"
+ elog "file as your /etc/X11/xorg.conf:"
+ elog " /usr/share/doc/${PF}/xorg.conf.vbox"
+ elog ""
+ elog "Also make sure you use the Mesa library for OpenGL:"
+ elog " eselect opengl set xorg-x11"
+ elog ""
+ elog "An autostart .desktop file has been installed to start"
+ elog "VBoxClient in desktop sessions."
+ elog ""
+ elog "You can mount shared folders with:"
+ elog " mount -t vboxsf <shared_folder_name> <mount_point>"
+ elog ""
+ elog "Warning:"
+ elog "this ebuild is only needed if you are running gentoo"
+ elog "inside a VirtualBox Virtual Machine, you don't need"
+ elog "it to run VirtualBox itself."
+ elog ""
+}
diff --git a/app-emulation/virtualbox-modules/Manifest b/app-emulation/virtualbox-modules/Manifest
index a7e25b6..28ee2d8 100644
--- a/app-emulation/virtualbox-modules/Manifest
+++ b/app-emulation/virtualbox-modules/Manifest
@@ -2,3 +2,4 @@ DIST vbox-kernel-module-src-4.3.28.tar.xz 539876 SHA256 fb052997ec4992b0ee102475
DIST vbox-kernel-module-src-4.3.30.tar.xz 540712 SHA256 28d89c06a4db190ec690980d68552745fb87ee2e23a3fe53edb29edda889f9d8 SHA512 8536d4bd105edf0fc112488232f7c85d8606b28b6cbeb28ee56bc135f693d1059328e75023299a67033bc1d486aea6a81c0fb23d51af500968119aa2f05156dc WHIRLPOOL 17452456aa127ca4ba53b2883f43970980f26094b80feaaa49b4773c386834d59f67afe21649539edc6dabde8725fd49c968002df9f2eb0e1ea8e888a2f8089b
DIST vbox-kernel-module-src-5.0.4.tar.xz 592716 SHA256 dad5657c9b1280050d2469a94e3e3d5b5cc8279f9a175abf068f3940ea700889 SHA512 0a71a3e857b8bd8b90a06db6950c6c40950f0f87b14d5e79c14dd82a674de1f171556d849006e49932f06bc794dfe2066e37d31fef352e9128dfaeab11caaadd WHIRLPOOL 78a0f704cce92ed3546710d8cbca263f1bb9784f99291fa29d58e177e1c65800e4a80cba4e59fd2577f00895829a04c8605ff0b849a23f35f797a1565a0ec6d0
DIST vbox-kernel-module-src-5.0.6.tar.xz 593640 SHA256 57b6ea7e772dbe032d8a024e48ad572c76dc4165ce2fb99cd45317c97466912f SHA512 88f1c61a6e749ba7076a3727baadf8ff7e0c3a70c279c6261757c7b8f0b3debd70a8cca21aea9e8b3a67feb0044c4e29439a075ccca3aaec0c0220f5a9264ac9 WHIRLPOOL c01fc142d650ef402601f457d83aeb3911200f3b7d5fbc4004c1da80832a911be01903f65ea92de592ff7e1f10688f77106a100d5fec8887767c8e8a7eb92a0d
+DIST vbox-kernel-module-src-5.0.8.tar.xz 594164 SHA256 16513e3bec113e6e594a58ff0999ba70de4214c889dafed90ca181a6a603457d SHA512 91faf0054cd359a7455c1933dea3a37829f092eb966d8d2c6855061d3ecadfa1ea91a2258479f5696f373577f7aef1939bdd5808f9ca336e15f5476f4f6d464e WHIRLPOOL 837578475126fe8484e89140248971ce89e637a629a26b1324dc0b8b22d65fe351a1860d5c009223723a9d420d1a6f859c12c17ade510451177a6213f1905328
diff --git a/app-emulation/virtualbox-modules/virtualbox-modules-5.0.8.ebuild b/app-emulation/virtualbox-modules/virtualbox-modules-5.0.8.ebuild
new file mode 100644
index 0000000..fe93a35
--- /dev/null
+++ b/app-emulation/virtualbox-modules/virtualbox-modules-5.0.8.ebuild
@@ -0,0 +1,59 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+# XXX: the tarball here is just the kernel modules split out of the binary
+# package that comes from virtualbox-bin
+
+EAPI=5
+
+inherit eutils linux-mod user
+
+MY_P=vbox-kernel-module-src-${PV}
+DESCRIPTION="Kernel Modules for Virtualbox"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="https://dev.gentoo.org/~polynomial-c/virtualbox/${MY_P}.tar.xz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="pax_kernel"
+
+RDEPEND="!=app-emulation/virtualbox-9999"
+
+S=${WORKDIR}
+
+BUILD_TARGETS="all"
+BUILD_TARGET_ARCH="${ARCH}"
+MODULE_NAMES="vboxdrv(misc:${S}) vboxnetflt(misc:${S}) vboxnetadp(misc:${S}) vboxpci(misc:${S})"
+
+pkg_setup() {
+ linux-mod_pkg_setup
+
+ BUILD_PARAMS="KERN_DIR=${KV_DIR} KERNOUT=${KV_OUT_DIR}"
+ enewgroup vboxusers
+}
+
+src_prepare() {
+ if kernel_is -ge 2 6 33 ; then
+ # evil patch for new kernels - header moved
+ grep -lR linux/autoconf.h * | xargs sed -i -e 's:<linux/autoconf.h>:<generated/autoconf.h>:'
+ fi
+
+ if use pax_kernel && kernel_is -ge 3 0 0 ; then
+ epatch "${FILESDIR}"/${PN}-4.1.4-pax-const.patch
+ fi
+}
+
+src_install() {
+ linux-mod_src_install
+ insinto /usr/lib/modules-load.d/
+ doins "${FILESDIR}"/virtualbox.conf
+}
+
+pkg_postinst() {
+ linux-mod_pkg_postinst
+ elog "If you are using sys-apps/openrc, please add \"vboxdrv\", \"vboxnetflt\""
+ elog "and \"vboxnetadp\" to:"
+ elog " /etc/conf.d/modules"
+}
diff --git a/app-emulation/virtualbox/Manifest b/app-emulation/virtualbox/Manifest
index b81288b..68535b7 100644
--- a/app-emulation/virtualbox/Manifest
+++ b/app-emulation/virtualbox/Manifest
@@ -2,5 +2,6 @@ DIST VirtualBox-4.3.28.tar.bz2 100092002 SHA256 e157ab76d1958ae2c56b2a3875194fbf
DIST VirtualBox-4.3.30.tar.bz2 97428942 SHA256 ea9569ec16cd6202ee61bcadb2506d31ac12fd343adb91565773a05eaaea9a36 SHA512 d0817335cf4bd196da93b91ede6bc9e48ca0d471166ab2790dbf508a4574e4ace54a86053932abf3b4e804c583e80a713d2ab2e556dc15bee6ef3a62f88b95fc WHIRLPOOL 47cbd702e83cc737e04b5862cc6c52e32be244dc1dc0145f582f57b2f19bb898f0f4b200576a28f10a3290691f1ffd43c256e8c8eb5545a9723be8eefca88a38
DIST VirtualBox-5.0.4.tar.bz2 109865904 SHA256 b19e23fc8e71f38aef7c059f44e59fcbff3bb2ce85baa8de81f1629b85f68fcf SHA512 4349792390f0a236faef0bdb06806dde604373dcccf83351f805508a2fdcae9f729a5e793ac53c4d134c50e48c0624b340328a7bb21ddcf15ed69a08365eb2b5 WHIRLPOOL cacf3193231a8500a3b475ede2d0f0458a656d87d3d97b78ccb743c1606f7f6ec58f6d56cb1bc0a40e9eb279d4cbeeab3318d1e71be3dead07fe4ccff6bdfbcf
DIST VirtualBox-5.0.6.tar.bz2 109863328 SHA256 22d63f28c43165a31dcccdec1c65f376f46d7e09555c47611cfaafb5576a5843 SHA512 3e51c9476c29a3ba79adda2d3b0c0b516459f58c8aa5e7b795be1aa2468b8e61241bbe5615787d7302a5f95230a446377bd8698f801c2114b26a471ae8bbbc11 WHIRLPOOL 11603c9aa14acac87032b5d8fc1f8d0a567632ca591230e0cc5c1d9a1ae9b39ebccb1a3bb85e1845abc01b04da550a2ef889e1bf91da0bb82df1fafa384f88b4
+DIST VirtualBox-5.0.8.tar.bz2 110540476 SHA256 e043518b7ab150e478c00b622360a5feb95f4e5b19e72bfcc71174356e2dacb3 SHA512 2a8e0f3e5fbb4b45786aa48cb408cf712cd968af65b25219eb39d54274612978704359b620179d751e828783950eb29d4cf330ac408a84dd65edbd0d98e25aa4 WHIRLPOOL 2b054cdb5c7c39008e876f0703e154509f4a79183aa85c4998717ae07a72e015a71bd22dc0427c8a464b3e16db92ebe9d731971f9788fbe56c8cc936669496fe
DIST virtualbox-4.3.16-patches-01.tar.xz 4288 SHA256 270c4f01b2c13c4133987b3acc073dfbf78840212cf09f083dbf8fc80407ce6f SHA512 595f88c4b388b4807347c15c1750ec73aceba1c82ad993e9a05c7b78dfece7b679aff0338b3a48e2ccee7911fb5ed0dba803052332a270230078551f747052bc WHIRLPOOL 2157ee3fb9beed906cff28647c869e37d62551ad8c93801c0f0ec6893675f11786aa6d92acf11c348d30aa58b6e03a3faa879c664dddac6e5b8525035986c9ca
DIST virtualbox-5.0.2-patches-01.tar.xz 4556 SHA256 8fcfa7972b0942f3e65bda73a35a6feb234aad770016fb4caafba105757d7ada SHA512 14ce8f0b17e593b2de676e0beaab688f29606aaea330151038fbb9259d3f5e4c22f254d1fa6cc45f968d81cf9f7d71deb9a7a32f565d07c1d9fa615431472ca9 WHIRLPOOL be73fd5576732f70f6ebb33a9d604d46a8fabdbdb0e187af3435f75412e21f62c0774130a9a6315e6b87ecf96d02398ffce828b3ab8f584716ed9a12e06d7cde
diff --git a/app-emulation/virtualbox/virtualbox-5.0.8.ebuild b/app-emulation/virtualbox/virtualbox-5.0.8.ebuild
new file mode 100644
index 0000000..eab9aeb
--- /dev/null
+++ b/app-emulation/virtualbox/virtualbox-5.0.8.ebuild
@@ -0,0 +1,433 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+inherit eutils fdo-mime flag-o-matic java-pkg-opt-2 linux-info multilib pax-utils python-single-r1 qt4-r2 toolchain-funcs udev
+
+MY_PV="${PV/beta/BETA}"
+MY_PV="${MY_PV/rc/RC}"
+MY_P=VirtualBox-${MY_PV}
+SRC_URI="http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}.tar.bz2
+ https://dev.gentoo.org/~polynomial-c/${PN}/patchsets/${PN}-5.0.2-patches-01.tar.xz"
+S="${WORKDIR}/${MY_P}"
+
+DESCRIPTION="Family of powerful x86 virtualization products for enterprise as well as home use"
+HOMEPAGE="http://www.virtualbox.org/"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="alsa doc headless java libressl pam pulseaudio +opengl python +qt4 +sdk +udev vboxwebsrv vnc"
+
+RDEPEND="!app-emulation/virtualbox-bin
+ ~app-emulation/virtualbox-modules-${PV}
+ dev-libs/libIDL
+ >=dev-libs/libxslt-1.1.19
+ net-misc/curl
+ !libressl? ( dev-libs/openssl:0= )
+ libressl? ( dev-libs/libressl:= )
+ dev-libs/libxml2
+ media-libs/libpng:0=
+ media-libs/libvpx
+ sys-libs/zlib
+ !headless? (
+ qt4? (
+ dev-qt/qtgui:4
+ dev-qt/qtcore:4
+ opengl? ( dev-qt/qtopengl:4 )
+ x11-libs/libXinerama
+ )
+ opengl? ( virtual/opengl media-libs/freeglut )
+ x11-libs/libX11
+ x11-libs/libXcursor
+ x11-libs/libXext
+ x11-libs/libXmu
+ x11-libs/libXt
+ media-libs/libsdl:0[X,video]
+ )
+
+ java? ( >=virtual/jre-1.6:= )
+ udev? ( >=virtual/udev-171 )
+ vnc? ( >=net-libs/libvncserver-0.9.9 )"
+DEPEND="${RDEPEND}
+ >=dev-util/kbuild-0.1.9998_pre20131130
+ >=dev-lang/yasm-0.6.2
+ sys-devel/bin86
+ sys-power/iasl
+ pam? ( sys-libs/pam )
+ sys-libs/libcap
+ doc? (
+ dev-texlive/texlive-basic
+ dev-texlive/texlive-latex
+ dev-texlive/texlive-latexrecommended
+ dev-texlive/texlive-latexextra
+ dev-texlive/texlive-fontsrecommended
+ dev-texlive/texlive-fontsextra
+ )
+ java? ( >=virtual/jre-1.6:= )
+ virtual/pkgconfig
+ alsa? ( >=media-libs/alsa-lib-1.0.13 )
+ !headless? ( x11-libs/libXinerama )
+ pulseaudio? ( media-sound/pulseaudio )
+ vboxwebsrv? ( net-libs/gsoap[-gnutls(-)] )
+ ${PYTHON_DEPS}"
+
+QA_TEXTRELS_x86="usr/lib/virtualbox-ose/VBoxGuestPropSvc.so
+ usr/lib/virtualbox/VBoxSDL.so
+ usr/lib/virtualbox/VBoxSharedFolders.so
+ usr/lib/virtualbox/VBoxDD2.so
+ usr/lib/virtualbox/VBoxOGLrenderspu.so
+ usr/lib/virtualbox/VBoxPython.so
+ usr/lib/virtualbox/VBoxDD.so
+ usr/lib/virtualbox/VBoxDDU.so
+ usr/lib/virtualbox/VBoxREM64.so
+ usr/lib/virtualbox/VBoxSharedClipboard.so
+ usr/lib/virtualbox/VBoxHeadless.so
+ usr/lib/virtualbox/VBoxRT.so
+ usr/lib/virtualbox/VBoxREM.so
+ usr/lib/virtualbox/VBoxSettings.so
+ usr/lib/virtualbox/VBoxKeyboard.so
+ usr/lib/virtualbox/VBoxSharedCrOpenGL.so
+ usr/lib/virtualbox/VBoxVMM.so
+ usr/lib/virtualbox/VirtualBox.so
+ usr/lib/virtualbox/VBoxOGLhosterrorspu.so
+ usr/lib/virtualbox/components/VBoxC.so
+ usr/lib/virtualbox/components/VBoxSVCM.so
+ usr/lib/virtualbox/components/VBoxDDU.so
+ usr/lib/virtualbox/components/VBoxRT.so
+ usr/lib/virtualbox/components/VBoxREM.so
+ usr/lib/virtualbox/components/VBoxVMM.so
+ usr/lib/virtualbox/VBoxREM32.so
+ usr/lib/virtualbox/VBoxPython2_4.so
+ usr/lib/virtualbox/VBoxPython2_5.so
+ usr/lib/virtualbox/VBoxPython2_6.so
+ usr/lib/virtualbox/VBoxPython2_7.so
+ usr/lib/virtualbox/VBoxXPCOMC.so
+ usr/lib/virtualbox/VBoxOGLhostcrutil.so
+ usr/lib/virtualbox/VBoxNetDHCP.so
+ usr/lib/virtualbox/VBoxNetNAT.so"
+
+REQUIRED_USE="
+ java? ( sdk )
+ python? (
+ ( sdk )
+ )
+ vboxwebsrv? ( java )
+ ${PYTHON_REQUIRED_USE}
+"
+
+pkg_setup() {
+ if ! use headless && ! use qt4 ; then
+ einfo "No USE=\"qt4\" selected, this build will not include"
+ einfo "any Qt frontend."
+ elif use headless && use qt4 ; then
+ einfo "You selected USE=\"headless qt4\", defaulting to"
+ einfo "USE=\"headless\", this build will not include any X11/Qt frontend."
+ fi
+
+ if ! use opengl ; then
+ einfo "No USE=\"opengl\" selected, this build will lack"
+ einfo "the OpenGL feature."
+ fi
+ if ! use python ; then
+ einfo "You have disabled the \"python\" USE flag. This will only"
+ einfo "disable the python bindings being installed."
+ fi
+ java-pkg-opt-2_pkg_setup
+ python-single-r1_pkg_setup
+}
+
+src_prepare() {
+ # Remove shipped binaries (kBuild,yasm), see bug #232775
+ rm -rf kBuild/bin tools
+
+ # Disable things unused or split into separate ebuilds
+ sed -e "s@MY_LIBDIR@$(get_libdir)@" \
+ "${FILESDIR}"/${PN}-5-localconfig > LocalConfig.kmk || die
+
+ # Respect LDFLAGS
+ sed -e "s@_LDFLAGS\.${ARCH}*.*=@& ${LDFLAGS}@g" \
+ -i Config.kmk src/libs/xpcom18a4/Config.kmk || die
+
+ # Use PAM only when pam USE flag is enbaled (bug #376531)
+ if ! use pam ; then
+ elog "Disabling PAM removes the possibility to use the VRDP features."
+ sed -i 's@^.*VBOX_WITH_PAM@#VBOX_WITH_PAM@' Config.kmk || die
+ sed -i 's@\(.*/auth/Makefile.kmk.*\)@#\1@' \
+ src/VBox/HostServices/Makefile.kmk || die
+ fi
+
+ # add correct java path
+ if use java ; then
+ sed "s@/usr/lib/jvm/java-6-sun@$(java-config -O)@" \
+ -i "${S}"/Config.kmk || die
+ java-pkg-opt-2_src_prepare
+ fi
+
+ if ! gcc-specs-pie ; then
+ EPATCH_EXCLUDE="050_${PN}-5.0.2-nopie.patch"
+ fi
+
+ EPATCH_EXCLUDE="007_virtualbox-4.3.16-gsoap2813.patch" \
+ EPATCH_SUFFIX="patch" \
+ EPATCH_FORCE="yes" \
+ epatch "${WORKDIR}/patches"
+
+ epatch_user
+}
+
+src_configure() {
+ local myconf
+ use alsa || myconf+=" --disable-alsa"
+ use doc || myconf+=" --disable-docs"
+ use java || myconf+=" --disable-java"
+ use opengl || myconf+=" --disable-opengl"
+ use pulseaudio || myconf+=" --disable-pulse"
+ use python || myconf+=" --disable-python"
+ use vboxwebsrv && myconf+=" --enable-webservice"
+ use vnc && myconf+=" --enable-vnc"
+ if ! use headless ; then
+ use qt4 || myconf+=" --disable-qt4"
+ else
+ myconf+=" --build-headless --disable-opengl"
+ fi
+ if use amd64 && ! has_multilib_profile ; then
+ myconf+=" --disable-vmmraw"
+ fi
+ # not an autoconf script
+ ./configure \
+ --with-gcc="$(tc-getCC)" \
+ --with-g++="$(tc-getCXX)" \
+ --disable-kmods \
+ --disable-dbus \
+ --disable-devmapper \
+ ${myconf} \
+ || die "configure failed"
+}
+
+src_compile() {
+ source ./env.sh
+
+ # Force kBuild to respect C[XX]FLAGS and MAKEOPTS (bug #178529)
+ # and strip all flags
+ # strip-flags
+
+ MAKEJOBS=$(echo ${MAKEOPTS} | egrep -o '(\-j|\-\-jobs)(=?|[[:space:]]*)[[:digit:]]+')
+ MAKELOAD=$(echo ${MAKEOPTS} | egrep -o '(\-l|\-\-load-average)(=?|[[:space:]]*)[[:digit:]]+')
+ MAKEOPTS="${MAKEJOBS} ${MAKELOAD}"
+ MAKE="kmk" emake \
+ VBOX_BUILD_PUBLISHER=_Gentoo \
+ TOOL_GCC3_CC="$(tc-getCC)" TOOL_GCC3_CXX="$(tc-getCXX)" \
+ TOOL_GCC3_AS="$(tc-getCC)" TOOL_GCC3_AR="$(tc-getAR)" \
+ TOOL_GCC3_LD="$(tc-getCXX)" TOOL_GCC3_LD_SYSMOD="$(tc-getLD)" \
+ TOOL_GCC3_CFLAGS="${CFLAGS}" TOOL_GCC3_CXXFLAGS="${CXXFLAGS}" \
+ VBOX_GCC_OPT="${CXXFLAGS}" \
+ TOOL_YASM_AS=yasm KBUILD_VERBOSE=2 \
+ all
+}
+
+src_install() {
+ cd "${S}"/out/linux.${ARCH}/release/bin || die
+
+ # Create configuration files
+ insinto /etc/vbox
+ newins "${FILESDIR}/${PN}-4-config" vbox.cfg
+
+ # Set the right libdir
+ sed -i \
+ -e "s@MY_LIBDIR@$(get_libdir)@" \
+ "${D}"/etc/vbox/vbox.cfg || die "vbox.cfg sed failed"
+
+ # Symlink binaries to the shipped wrapper
+ exeinto /usr/$(get_libdir)/${PN}
+ newexe "${FILESDIR}/${PN}-ose-3-wrapper" "VBox"
+ fowners root:vboxusers /usr/$(get_libdir)/${PN}/VBox
+ fperms 0750 /usr/$(get_libdir)/${PN}/VBox
+
+ dosym /usr/$(get_libdir)/${PN}/VBox /usr/bin/VBoxManage
+ dosym /usr/$(get_libdir)/${PN}/VBox /usr/bin/VBoxVRDP
+ dosym /usr/$(get_libdir)/${PN}/VBox /usr/bin/VBoxHeadless
+ dosym /usr/$(get_libdir)/${PN}/VBoxTunctl /usr/bin/VBoxTunctl
+
+ # Install binaries and libraries
+ insinto /usr/$(get_libdir)/${PN}
+ doins -r components
+
+ if use sdk ; then
+ doins -r sdk
+ fi
+
+ if use vboxwebsrv ; then
+ doins vboxwebsrv
+ fowners root:vboxusers /usr/$(get_libdir)/${PN}/vboxwebsrv
+ fperms 0750 /usr/$(get_libdir)/${PN}/vboxwebsrv
+ dosym /usr/$(get_libdir)/${PN}/VBox /usr/bin/vboxwebsrv
+ newinitd "${FILESDIR}"/vboxwebsrv-initd vboxwebsrv
+ newconfd "${FILESDIR}"/vboxwebsrv-confd vboxwebsrv
+ fi
+
+ local rcfiles="*.rc"
+ if use amd64 && ! has_multilib_profile ; then
+ rcfiles=""
+ fi
+
+ for each in VBox{Manage,SVC,XPCOMIPCD,Tunctl,ExtPackHelperApp} *so *r0 ${rcfiles} ; do
+ doins ${each}
+ fowners root:vboxusers /usr/$(get_libdir)/${PN}/${each}
+ fperms 0750 /usr/$(get_libdir)/${PN}/${each}
+ done
+
+ # VBoxNetAdpCtl and VBoxNetDHCP binaries need to be suid root in any case..
+ for each in VBoxNet{AdpCtl,DHCP,NAT} ; do
+ doins ${each}
+ fowners root:vboxusers /usr/$(get_libdir)/${PN}/${each}
+ fperms 4750 /usr/$(get_libdir)/${PN}/${each}
+ done
+
+ # VBoxSVC and VBoxManage need to be pax-marked (bug #403453)
+ # VBoxXPCOMIPCD (bug #524202)
+ for each in VBox{Manage,SVC,XPCOMIPCD} ; do
+ if ! pax-mark -m "${D}"/usr/$(get_libdir)/${PN}/${each} ; then
+ ewarn "Couldn't pax-mark /usr/$(get_libdir)/${PN}/${each}"
+ fi
+ done
+
+ if ! use headless ; then
+ doins VBoxSDL
+ fowners root:vboxusers /usr/$(get_libdir)/${PN}/VBoxSDL
+ fperms 4750 /usr/$(get_libdir)/${PN}/VBoxSDL
+ if ! pax-mark -m "${D}"/usr/$(get_libdir)/${PN}/VBoxSDL ; then
+ ewarn "Couldn't pax-mark /usr/$(get_libdir)/${PN}/VBoxSDL"
+ fi
+
+ if use opengl && use qt4 ; then
+ doins VBoxTestOGL
+ fowners root:vboxusers /usr/$(get_libdir)/${PN}/VBoxTestOGL
+ fperms 0750 /usr/$(get_libdir)/${PN}/VBoxTestOGL
+ if ! pax-mark -m "${D}"/usr/$(get_libdir)/${PN}/VBoxTestOGL ; then
+ ewarn "Couldn't pax-mark /usr/$(get_libdir)/${PN}/VBoxTestOGL"
+ fi
+ fi
+
+ dosym /usr/$(get_libdir)/${PN}/VBox /usr/bin/VBoxSDL
+
+ if use qt4 ; then
+ doins VirtualBox
+ fowners root:vboxusers /usr/$(get_libdir)/${PN}/VirtualBox
+ fperms 4750 /usr/$(get_libdir)/${PN}/VirtualBox
+ if ! pax-mark -m "${D}"/usr/$(get_libdir)/${PN}/VirtualBox ; then
+ ewarn "Couldn't pax-mark /usr/$(get_libdir)/${PN}/VirtualBox"
+ fi
+
+ dosym /usr/$(get_libdir)/${PN}/VBox /usr/bin/VirtualBox
+
+ newmenu "${FILESDIR}"/${PN}-ose.desktop-2 ${PN}.desktop
+ fi
+
+ pushd "${S}"/src/VBox/Artwork/OSE &>/dev/null || die
+ for size in 16 32 48 64 128 ; do
+ newicon -s ${size} ${PN}-${size}px.png ${PN}.png
+ done
+ newicon ${PN}-48px.png ${PN}.png
+ doicon -s scalable ${PN}.svg
+ popd &>/dev/null || die
+ fi
+
+ doins VBoxHeadless
+ fowners root:vboxusers /usr/$(get_libdir)/${PN}/VBoxHeadless
+ fperms 4750 /usr/$(get_libdir)/${PN}/VBoxHeadless
+ if ! pax-mark -m "${D}"/usr/$(get_libdir)/${PN}/VBoxHeadless ; then
+ ewarn "Couldn't pax-mark /usr/$(get_libdir)/${PN}/VBoxHeadless"
+ fi
+
+ insinto /usr/$(get_libdir)/${PN}
+ # Install EFI Firmware files (bug #320757)
+ pushd "${S}"/src/VBox/Devices/EFI/FirmwareBin &>/dev/null || die
+ for fwfile in VBoxEFI{32,64}.fd ; do
+ doins ${fwfile}
+ fowners root:vboxusers /usr/$(get_libdir)/${PN}/${fwfile}
+ done
+ popd &>/dev/null || die
+
+ if use udev ; then
+ # New way of handling USB device nodes for VBox (bug #356215)
+ local udevdir="$(get_udevdir)"
+ insinto ${udevdir}
+ doins VBoxCreateUSBNode.sh
+ fowners root:vboxusers ${udevdir}/VBoxCreateUSBNode.sh
+ fperms 0750 ${udevdir}/VBoxCreateUSBNode.sh
+ insinto ${udevdir}/rules.d
+ doins "${FILESDIR}"/10-virtualbox.rules
+ sed "s@%UDEVDIR%@${udevdir}@" \
+ -i "${D}"${udevdir}/rules.d/10-virtualbox.rules || die
+ fi
+
+ insinto /usr/share/${PN}
+ if ! use headless && use qt4 ; then
+ doins -r nls
+ fi
+
+ # VRDPAuth only works with this (bug #351949)
+ dosym VBoxAuth.so /usr/$(get_libdir)/${PN}/VRDPAuth.so
+
+ # set an env-variable for 3rd party tools
+ echo -n "VBOX_APP_HOME=/usr/$(get_libdir)/${PN}" > "${T}/90virtualbox"
+ doenvd "${T}/90virtualbox"
+
+ if use java ; then
+ java-pkg_regjar "${D}/usr/$(get_libdir)/${PN}/sdk/bindings/xpcom/java/vboxjxpcom.jar"
+ java-pkg_regso "${D}/usr/$(get_libdir)/${PN}/libvboxjxpcom.so"
+ fi
+}
+
+pkg_postinst() {
+ fdo-mime_desktop_database_update
+
+ if use udev ; then
+ udevadm control --reload-rules \
+ && udevadm trigger --subsystem-match=usb
+ fi
+
+ if ! use headless && use qt4 ; then
+ elog "To launch VirtualBox just type: \"VirtualBox\"."
+ fi
+ elog "You must be in the vboxusers group to use VirtualBox."
+ elog ""
+ elog "The latest user manual is available for download at:"
+ elog "http://download.virtualbox.org/virtualbox/${PV}/UserManual.pdf"
+ elog ""
+ elog "For advanced networking setups you should emerge:"
+ elog "net-misc/bridge-utils and sys-apps/usermode-utilities"
+ elog ""
+ elog "IMPORTANT!"
+ elog "If you upgrade from app-emulation/virtualbox-ose make sure to run"
+ elog "\"env-update\" as root and logout and relogin as the user you wish"
+ elog "to run ${PN} as."
+ elog ""
+ elog "Starting with version 4.0.0, ${PN} has USB-1 support."
+ elog "For USB-2 support, PXE-boot ability and VRDP support please emerge"
+ elog " app-emulation/virtualbox-extpack-oracle"
+ elog "package."
+ elog "Starting with version 5.0.0, ${PN} no longer has the \"additions\" and"
+ elog "the \"extension\" USE flag. For installation of the guest additions ISO"
+ elog "image, please emerge"
+ elog " app-emulation/virtualbox-additions"
+ elog "and for the USB2, USB3, VRDP and PXE boot ROM modules, please emerge"
+ elog " app-emulation/virtualbox-extpack-oracle"
+ if ! use udev ; then
+ elog ""
+ elog "WARNING!"
+ elog "Without USE=udev, USB devices will likely not work in ${PN}."
+ elif [ -e "${ROOT}/etc/udev/rules.d/10-virtualbox.rules" ] ; then
+ elog ""
+ elog "Please remove \"${ROOT}/etc/udev/rules.d/10-virtualbox.rules\""
+ elog "or else USB in ${PN} won't work."
+ fi
+}
+
+pkg_postrm() {
+ fdo-mime_desktop_database_update
+}
diff --git a/x11-drivers/xf86-video-virtualbox/Manifest b/x11-drivers/xf86-video-virtualbox/Manifest
index 8d76d9a..1fe862f 100644
--- a/x11-drivers/xf86-video-virtualbox/Manifest
+++ b/x11-drivers/xf86-video-virtualbox/Manifest
@@ -2,3 +2,4 @@ DIST VirtualBox-4.3.28.tar.bz2 100092002 SHA256 e157ab76d1958ae2c56b2a3875194fbf
DIST VirtualBox-4.3.30.tar.bz2 97428942 SHA256 ea9569ec16cd6202ee61bcadb2506d31ac12fd343adb91565773a05eaaea9a36 SHA512 d0817335cf4bd196da93b91ede6bc9e48ca0d471166ab2790dbf508a4574e4ace54a86053932abf3b4e804c583e80a713d2ab2e556dc15bee6ef3a62f88b95fc WHIRLPOOL 47cbd702e83cc737e04b5862cc6c52e32be244dc1dc0145f582f57b2f19bb898f0f4b200576a28f10a3290691f1ffd43c256e8c8eb5545a9723be8eefca88a38
DIST VirtualBox-5.0.4.tar.bz2 109865904 SHA256 b19e23fc8e71f38aef7c059f44e59fcbff3bb2ce85baa8de81f1629b85f68fcf SHA512 4349792390f0a236faef0bdb06806dde604373dcccf83351f805508a2fdcae9f729a5e793ac53c4d134c50e48c0624b340328a7bb21ddcf15ed69a08365eb2b5 WHIRLPOOL cacf3193231a8500a3b475ede2d0f0458a656d87d3d97b78ccb743c1606f7f6ec58f6d56cb1bc0a40e9eb279d4cbeeab3318d1e71be3dead07fe4ccff6bdfbcf
DIST VirtualBox-5.0.6.tar.bz2 109863328 SHA256 22d63f28c43165a31dcccdec1c65f376f46d7e09555c47611cfaafb5576a5843 SHA512 3e51c9476c29a3ba79adda2d3b0c0b516459f58c8aa5e7b795be1aa2468b8e61241bbe5615787d7302a5f95230a446377bd8698f801c2114b26a471ae8bbbc11 WHIRLPOOL 11603c9aa14acac87032b5d8fc1f8d0a567632ca591230e0cc5c1d9a1ae9b39ebccb1a3bb85e1845abc01b04da550a2ef889e1bf91da0bb82df1fafa384f88b4
+DIST VirtualBox-5.0.8.tar.bz2 110540476 SHA256 e043518b7ab150e478c00b622360a5feb95f4e5b19e72bfcc71174356e2dacb3 SHA512 2a8e0f3e5fbb4b45786aa48cb408cf712cd968af65b25219eb39d54274612978704359b620179d751e828783950eb29d4cf330ac408a84dd65edbd0d98e25aa4 WHIRLPOOL 2b054cdb5c7c39008e876f0703e154509f4a79183aa85c4998717ae07a72e015a71bd22dc0427c8a464b3e16db92ebe9d731971f9788fbe56c8cc936669496fe
diff --git a/x11-drivers/xf86-video-virtualbox/xf86-video-virtualbox-5.0.8.ebuild b/x11-drivers/xf86-video-virtualbox/xf86-video-virtualbox-5.0.8.ebuild
new file mode 100644
index 0000000..d90097a
--- /dev/null
+++ b/x11-drivers/xf86-video-virtualbox/xf86-video-virtualbox-5.0.8.ebuild
@@ -0,0 +1,169 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+inherit eutils linux-mod multilib python-single-r1 versionator toolchain-funcs
+
+MY_PV="${PV/beta/BETA}"
+MY_PV="${MY_PV/rc/RC}"
+MY_P=VirtualBox-${MY_PV}
+DESCRIPTION="VirtualBox video driver"
+HOMEPAGE="http://www.virtualbox.org/"
+SRC_URI="http://download.virtualbox.org/virtualbox/${MY_PV}/${MY_P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="dri"
+
+RDEPEND=">=x11-base/xorg-server-1.7:=[-minimal]
+ x11-libs/libXcomposite"
+DEPEND="${RDEPEND}
+ >=dev-util/kbuild-0.1.9998_pre20131130
+ ${PYTHON_DEPS}
+ >=dev-lang/yasm-0.6.2
+ sys-power/iasl
+ x11-proto/fontsproto
+ x11-proto/randrproto
+ x11-proto/renderproto
+ x11-proto/resourceproto
+ x11-proto/scrnsaverproto
+ x11-proto/xextproto
+ x11-proto/xineramaproto
+ x11-proto/xproto
+ x11-libs/libXdmcp
+ x11-libs/libXau
+ x11-libs/libX11
+ x11-libs/libXfixes
+ x11-libs/libXext
+ dri? ( x11-proto/xf86driproto
+ >=x11-libs/libdrm-2.4.5 )"
+
+REQUIRED_USE=( "${PYTHON_REQUIRED_USE}" )
+
+BUILD_TARGETS="all"
+BUILD_TARGET_ARCH="${ARCH}"
+MODULE_NAMES="vboxvideo(misc:${WORKDIR}/vboxvideo_drm:${WORKDIR}/vboxvideo_drm)"
+
+S="${WORKDIR}/${MY_P}"
+
+QA_TEXTRELS_x86="usr/lib/VBoxOGL.so"
+
+pkg_setup() {
+ linux-mod_pkg_setup
+ BUILD_PARAMS="KERN_DIR=${KV_OUT_DIR} KERNOUT=${KV_OUT_DIR}"
+
+ python-single-r1_pkg_setup
+}
+
+src_prepare() {
+ # Prepare the vboxvideo_drm sources and Makefile in ${WORKDIR}
+ cp -a "${S}"/src/VBox/Additions/linux/drm "${WORKDIR}/vboxvideo_drm" \
+ || die "cannot copy vboxvideo_drm directory"
+ cp "${FILESDIR}/${PN}-3-vboxvideo_drm.makefile" \
+ "${WORKDIR}/vboxvideo_drm/Makefile" \
+ || die "cannot copy vboxvideo_drm Makefile"
+
+ # stupid new header references...
+ for vboxheader in {product,version}-generated.h ; do
+ ln -sf "${S}"/out/linux.${ARCH}/release/${vboxheader} \
+ "${WORKDIR}/vboxvideo_drm/${vboxheader}"
+ done
+
+ # Remove shipped binaries (kBuild,yasm), see bug #232775
+ rm -rf kBuild/bin tools
+
+ # Disable things unused or splitted into separate ebuilds
+ cp "${FILESDIR}/${PN}-5-localconfig" LocalConfig.kmk || die
+
+ # Ugly hack to build the opengl part of the video driver
+ epatch "${FILESDIR}/${PN}-2.2.0-enable-opengl.patch"
+
+ # unset useless/problematic checks in configure
+ epatch "${FILESDIR}/${PN}-5.0.0_beta3-configure_checks.patch"
+
+ # link with lazy on hardened #394757
+ sed -i '/^TEMPLATE_VBOXR3EXE_LDFLAGS.linux/s/$/ -Wl,-z,lazy/' Config.kmk || die
+}
+
+src_configure() {
+ # build the user-space tools, warnings are harmless
+ local cmd=(
+ ./configure
+ --nofatal
+ --disable-xpcom
+ --disable-sdl-ttf
+ --disable-pulse
+ --disable-alsa
+ --with-gcc="$(tc-getCC)"
+ --with-g++="$(tc-getCXX)"
+ --target-arch=${ARCH}
+ --with-linux="${KV_OUT_DIR}"
+ --build-headless
+ )
+ echo "${cmd[@]}"
+ "${cmd[@]}" || die "configure failed"
+ source ./env.sh
+ export VBOX_GCC_OPT="${CFLAGS} ${CPPFLAGS}"
+}
+
+src_compile() {
+ for each in /src/VBox/{Runtime,Additions/common/VBoxGuestLib} \
+ /src/VBox/{GuestHost/OpenGL,Additions/x11/x11stubs,Additions/common/crOpenGL} \
+ /src/VBox/Additions/x11/vboxvideo ; do
+ cd "${S}"${each} || die
+ MAKE="kmk" \
+ emake TOOL_YASM_AS=yasm \
+ VBOX_USE_SYSTEM_XORG_HEADERS=1 \
+ KBUILD_PATH="${S}/kBuild" \
+ KBUILD_VERBOSE=2
+ done
+
+ if use dri ; then
+ # Now creating the kernel modules. We must do this _after_
+ # we compiled the user-space tools as we need two of the
+ # automatically generated header files. (>=3.2.0)
+ linux-mod_src_compile
+ fi
+}
+
+src_install() {
+ if use dri; then
+ linux-mod_src_install
+ fi
+
+ cd "${S}/out/linux.${ARCH}/release/bin/additions"
+ insinto /usr/$(get_libdir)/xorg/modules/drivers
+ newins vboxvideo_drv_system.so vboxvideo_drv.so
+
+ # Guest OpenGL driver
+ insinto /usr/$(get_libdir)
+ doins -r VBoxOGL*
+
+ if use dri ; then
+ dosym /usr/$(get_libdir)/VBoxOGL.so \
+ /usr/$(get_libdir)/dri/vboxvideo_dri.so
+ fi
+}
+
+pkg_postinst() {
+ elog "You need to edit the file /etc/X11/xorg.conf and set:"
+ elog ""
+ elog " Driver \"vboxvideo\""
+ elog ""
+ elog "in the Graphics device section (Section \"Device\")"
+ elog ""
+ if use dri; then
+ elog "To use the kernel drm video driver, please add:"
+ elog "\"vboxvideo\" to:"
+ if has_version sys-apps/openrc ; then
+ elog "/etc/conf.d/modules"
+ else
+ elog "/etc/modules.autoload.d/kernel-${KV_MAJOR}.${KV_MINOR}"
+ fi
+ elog ""
+ fi
+}
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-10-13 9:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-10-13 9:44 [gentoo-commits] repo/gentoo:master commit in: app-emulation/virtualbox-guest-additions/, Viorel Munteanu
-- strict thread matches above, loose matches on Subject: below --
2022-09-05 12:39 Joonas Niilola
2022-07-27 21:05 Sam James
2019-09-24 19:56 Thomas Deutschmann
2016-11-01 15:35 Lars Wendler
2015-10-20 21:42 Lars Wendler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox