* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/
@ 2021-05-03 0:07 Quentin Retornaz
0 siblings, 0 replies; 7+ messages in thread
From: Quentin Retornaz @ 2021-05-03 0:07 UTC (permalink / raw
To: gentoo-commits
commit: 6aad0c80f854a56147acceb4574d7f5f85cbd12b
Author: Quentin Retornaz <gentoo <AT> retornaz <DOT> com>
AuthorDate: Sun May 2 23:56:01 2021 +0000
Commit: Quentin Retornaz <gentoo <AT> retornaz <DOT> com>
CommitDate: Sun May 2 23:56:01 2021 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=6aad0c80
net-wireless/hostapd: remove libressl USE flag
Package-Manager: Portage-3.0.18, Repoman-3.0.2
Signed-off-by: Quentin Retornaz <gentoo <AT> retornaz.com>
net-wireless/hostapd/hostapd-2.6.ebuild | 9 ++---
net-wireless/hostapd/hostapd-2.9-r3.ebuild | 64 ++++++++----------------------
net-wireless/hostapd/metadata.xml | 2 -
3 files changed, 20 insertions(+), 55 deletions(-)
diff --git a/net-wireless/hostapd/hostapd-2.6.ebuild b/net-wireless/hostapd/hostapd-2.6.ebuild
index 68f116a..d85b6d4 100644
--- a/net-wireless/hostapd/hostapd-2.6.ebuild
+++ b/net-wireless/hostapd/hostapd-2.6.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2017 Gentoo Foundation
+# Copyright 1999-2021 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI="6"
@@ -14,12 +14,9 @@ SRC_URI="http://hostap.epitest.fi/releases/${P}.tar.gz"
LICENSE="|| ( GPL-2 BSD )"
SLOT="0"
KEYWORDS="amd64 ~arm ~mips ppc x86"
-IUSE="ipv6 libressl logwatch netlink sqlite +ssl +wps +crda"
+IUSE="ipv6 logwatch netlink sqlite +ssl +wps +crda"
-DEPEND="ssl? (
- !libressl? ( dev-libs/openssl:*[-bindist] )
- libressl? ( dev-libs/libressl:= )
- )
+DEPEND="ssl? ( dev-libs/openssl:*[-bindist] )
kernel_linux? (
dev-libs/libnl:3
crda? ( net-wireless/crda )
diff --git a/net-wireless/hostapd/hostapd-2.9-r3.ebuild b/net-wireless/hostapd/hostapd-2.9-r3.ebuild
index 61cac6a..a2a5bdf 100644
--- a/net-wireless/hostapd/hostapd-2.9-r3.ebuild
+++ b/net-wireless/hostapd/hostapd-2.9-r3.ebuild
@@ -28,17 +28,10 @@ fi
LICENSE="BSD"
SLOT="0"
-IUSE="internal-tls ipv6 libressl logwatch netlink sqlite +suiteb +wps +crda"
-
-# suiteb impl uses openssl feature not available in libressl, see bug 710992
-REQUIRED_USE="?? ( libressl suiteb )"
+IUSE="ipv6 logwatch netlink sqlite +wps +crda"
DEPEND="
- libressl? ( dev-libs/libressl:0= )
- !libressl? (
- internal-tls? ( dev-libs/libtommath )
- !internal-tls? ( dev-libs/openssl:0=[-bindist] )
- )
+ dev-libs/openssl:0=[-bindist]
kernel_linux? (
dev-libs/libnl:3
crda? ( net-wireless/crda )
@@ -48,16 +41,6 @@ DEPEND="
RDEPEND="${DEPEND}"
-pkg_pretend() {
- if use internal-tls; then
- if use libressl; then
- elog "libressl flag takes precedence over internal-tls"
- else
- ewarn "internal-tls implementation is experimental and provides fewer features"
- fi
- fi
-}
-
src_unpack() {
# Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
default
@@ -102,27 +85,18 @@ src_configure() {
echo "CONFIG_ERP=y" >> ${CONFIG} || die
echo "CONFIG_EAP_MD5=y" >> ${CONFIG} || die
- if use suiteb; then
- echo "CONFIG_SUITEB=y" >> ${CONFIG} || die
- echo "CONFIG_SUITEB192=y" >> ${CONFIG} || die
- fi
-
- if use internal-tls && ! use libressl; then
- echo "CONFIG_TLS=internal" >> ${CONFIG} || die
- else
- # SSL authentication methods
- echo "CONFIG_DPP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_FAST=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PWD=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TLS=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} || die
- echo "CONFIG_OWE=y" >> ${CONFIG} || die
- echo "CONFIG_SAE=y" >> ${CONFIG} || die
- echo "CONFIG_TLSV11=y" >> ${CONFIG} || die
- echo "CONFIG_TLSV12=y" >> ${CONFIG} || die
- fi
+ # SSL authentication methods
+ echo "CONFIG_DPP=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_FAST=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_PWD=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_TLS=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} || die
+ echo "CONFIG_OWE=y" >> ${CONFIG} || die
+ echo "CONFIG_SAE=y" >> ${CONFIG} || die
+ echo "CONFIG_TLSV11=y" >> ${CONFIG} || die
+ echo "CONFIG_TLSV12=y" >> ${CONFIG} || die
if use wps; then
# Enable Wi-Fi Protected Setup
@@ -211,10 +185,8 @@ src_configure() {
src_compile() {
emake V=1
- if use libressl || ! use internal-tls; then
- emake V=1 nt_password_hash
- emake V=1 hlr_auc_gw
- fi
+ emake V=1 nt_password_hash
+ emake V=1 hlr_auc_gw
}
src_install() {
@@ -226,9 +198,7 @@ src_install() {
dosbin ${PN}
dobin ${PN}_cli
- if use libressl || ! use internal-tls; then
- dobin nt_password_hash hlr_auc_gw
- fi
+ dobin nt_password_hash hlr_auc_gw
newinitd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-init.d ${PN}
newconfd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-conf.d ${PN}
diff --git a/net-wireless/hostapd/metadata.xml b/net-wireless/hostapd/metadata.xml
index b5dc25e..9de6b97 100644
--- a/net-wireless/hostapd/metadata.xml
+++ b/net-wireless/hostapd/metadata.xml
@@ -8,12 +8,10 @@
</longdescription>
<use>
<flag name="crda">Add CRDA support</flag>
- <flag name="internal-tls">Use internal TLSv1 implementation instead of depending on OpenSSL, LibreSSL or GnuTLS</flag>
<flag name="logwatch">Install support files for
<pkg>sys-apps/logwatch</pkg></flag>
<flag name="netlink">Adding support for using netlink to create VLANs</flag>
<flag name="sqlite">Adding sqlite support</flag>
- <flag name="suiteb">Adding support for NSA Suite B Cryptography</flag>
<flag name="wps">Add support for Wi-Fi Protected Setup</flag>
</use>
<maintainer type="person">
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/
@ 2023-04-12 2:16 orbea
0 siblings, 0 replies; 7+ messages in thread
From: orbea @ 2023-04-12 2:16 UTC (permalink / raw
To: gentoo-commits
commit: 1f6b7b55b2254c33fc4a88767c7892b3c78466c9
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Tue Apr 11 21:57:34 2023 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Wed Apr 12 02:06:19 2023 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=1f6b7b55
net-wireless/hostapd: Remove 2.9-r6
Closes: https://github.com/gentoo/libressl/pull/522
Signed-off-by: orbea <orbea <AT> riseup.net>
net-wireless/hostapd/Manifest | 1 -
net-wireless/hostapd/hostapd-2.9-r6.ebuild | 279 -----------------------------
2 files changed, 280 deletions(-)
diff --git a/net-wireless/hostapd/Manifest b/net-wireless/hostapd/Manifest
index f33599c..6bcebd0 100644
--- a/net-wireless/hostapd/Manifest
+++ b/net-wireless/hostapd/Manifest
@@ -1,3 +1,2 @@
DIST hostapd-2.10.tar.gz 2440435 BLAKE2B dbeeae2f62a8ab52df3e2d05ff0467b643cd68349ef3b28814a11dfb67d4b23d14cf2461a3040694706ec614fcd7c2e0fe58f3597e877cf47296cd75e11c792f SHA512 243baa82d621f859d2507d8d5beb0ebda15a75548a62451dc9bca42717dcc8607adac49b354919a41d8257d16d07ac7268203a79750db0cfb34b51f80ff1ce8f
-DIST hostapd-2.9.tar.gz 2244312 BLAKE2B 07308376dd1576313513fba815b220e4ab2f30ed1a402e24b5c8e62ded79c6d718ff47aad1a2222c9e46ffb7334580b556f19a8aef013eab34a8d61d708d2f01 SHA512 66c729380152db18b64520bda55dfa00af3b0264f97b5de100b81a46e2593571626c4bdcf900f0988ea2131e30bc8788f75d8489dd1f57e37fd56e8098e48a9c
DIST net-wireless_hostapd_2.7-r2_extras.tar.xz 1820 BLAKE2B 5c4daf0e4fcf5ae0803cdbe2aabcc75e89b1e92048e8a01894d73639a16b049174b37eca6b6206c337a2874a6e6d5588d50fa5b8a4813e7f6c22bf02efca852f SHA512 65bc4634c8314280ceab44d1f5d6d62092f4bca48253f107b076211020f6f6502388490aee907f9910846a25ba2da7e4122bdb1873eb2b12bf94e867e3295f4c
diff --git a/net-wireless/hostapd/hostapd-2.9-r6.ebuild b/net-wireless/hostapd/hostapd-2.9-r6.ebuild
deleted file mode 100644
index 242c573..0000000
--- a/net-wireless/hostapd/hostapd-2.9-r6.ebuild
+++ /dev/null
@@ -1,279 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit flag-o-matic systemd savedconfig toolchain-funcs
-
-DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
-HOMEPAGE="https://w1.fi/ https://w1.fi/cgit/hostap/"
-EXTRAS_VER="2.7-r2"
-EXTRAS_NAME="${CATEGORY}_${PN}_${EXTRAS_VER}_extras"
-SRC_URI="https://dev.gentoo.org/~andrey_utkin/distfiles/${EXTRAS_NAME}.tar.xz"
-S="${S}/${PN}"
-
-if [[ ${PV} == 9999 ]]; then
- inherit git-r3
- EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
- if [[ ${PV} =~ ^.*_p[0-9]{8}$ ]]; then
- SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
- else
- SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
- fi
-
- # Never stabilize snapshot ebuilds please
- KEYWORDS="amd64 arm arm64 ~mips ppc x86"
-fi
-
-LICENSE="BSD"
-SLOT="0"
-IUSE="internal-tls ipv6 netlink sqlite +suiteb +wps +crda"
-
-DEPEND="
- internal-tls? ( dev-libs/libtommath )
- !internal-tls? ( dev-libs/openssl:0=[-bindist(-)] )
- kernel_linux? (
- dev-libs/libnl:3
- crda? ( net-wireless/crda )
- )
- netlink? ( net-libs/libnfnetlink )
- sqlite? ( >=dev-db/sqlite-3 )"
-RDEPEND="${DEPEND}"
-BDEPEND="virtual/pkgconfig"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-2.10-libressl.patch
-)
-
-pkg_pretend() {
- if use internal-tls; then
- ewarn "internal-tls implementation is experimental and provides fewer features"
- fi
-}
-
-src_unpack() {
- # Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
- default
-
- if [[ ${PV} == 9999 ]] ; then
- git-r3_src_unpack
- fi
-}
-
-src_prepare() {
- # Allow users to apply patches to src/drivers for example,
- # i.e. anything outside ${S}/${PN}
- pushd ../ >/dev/null || die
- default
-
- # CVE-2019-16275 (bug #696032)
- eapply "${FILESDIR}"/${P}-AP-Silently-ignore-management-frame-from-unexpected.patch
- # CVE-2020-12695 (bug #727542)
- eapply "${FILESDIR}"/${P}-0001-WPS-UPnP-Do-not-allow-event-subscriptions-with-URLs-.patch
- eapply "${FILESDIR}"/${P}-0002-WPS-UPnP-Fix-event-message-generation-using-a-long-U.patch
- eapply "${FILESDIR}"/${P}-0003-WPS-UPnP-Handle-HTTP-initiation-failures-for-events-.patch
- # CVE-2021-30004 (bug #780135)
- eapply "${FILESDIR}"/${P}-ASN-1-Validate-DigestAlgorithmIdentifier-parameters.patch
-
- popd >/dev/null || die
-
- sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
- "${S}/hostapd.conf" || die
-}
-
-src_configure() {
- local CONFIG="${S}"/.config
-
- restore_config "${CONFIG}"
- if [[ -f "${CONFIG}" ]]; then
- default
- return 0
- fi
-
- # toolchain setup
- echo "CC = $(tc-getCC)" > ${CONFIG} || die
-
- # EAP authentication methods
- echo "CONFIG_EAP=y" >> ${CONFIG} || die
- echo "CONFIG_ERP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_MD5=y" >> ${CONFIG} || die
-
- if use suiteb; then
- echo "CONFIG_SUITEB=y" >> ${CONFIG} || die
- echo "CONFIG_SUITEB192=y" >> ${CONFIG} || die
- fi
-
- if use internal-tls ; then
- echo "CONFIG_TLS=internal" >> ${CONFIG} || die
- else
- # SSL authentication methods
- echo "CONFIG_DPP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_FAST=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PWD=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TLS=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} || die
- echo "CONFIG_OWE=y" >> ${CONFIG} || die
- echo "CONFIG_SAE=y" >> ${CONFIG} || die
- echo "CONFIG_TLSV11=y" >> ${CONFIG} || die
- echo "CONFIG_TLSV12=y" >> ${CONFIG} || die
- fi
-
- if use wps; then
- # Enable Wi-Fi Protected Setup
- echo "CONFIG_WPS=y" >> ${CONFIG} || die
- echo "CONFIG_WPS2=y" >> ${CONFIG} || die
- echo "CONFIG_WPS_UPNP=y" >> ${CONFIG} || die
- echo "CONFIG_WPS_NFC=y" >> ${CONFIG} || die
- einfo "Enabling Wi-Fi Protected Setup support"
- fi
-
- echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TNC=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_GTC=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_SIM=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_AKA=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_EKE=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PAX=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PSK=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_SAKE=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_GPSK=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG} || die
-
- einfo "Enabling drivers: "
-
- # drivers
- echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG} || die
- einfo " HostAP driver enabled"
- echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG} || die
- einfo " Wired driver enabled"
- echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG} || die
- einfo " None driver enabled"
-
- einfo " nl80211 driver enabled"
- echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG} || die
-
- # epoll
- echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG} || die
-
- # misc
- echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG} || die
- echo "CONFIG_PKCS12=y" >> ${CONFIG} || die
- echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG} || die
- echo "CONFIG_IAPP=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211R=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211W=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211N=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211AC=y" >> ${CONFIG} || die
- echo "CONFIG_OCV=y" >> ${CONFIG} || die
- echo "CONFIG_PEERKEY=y" >> ${CONFIG} || die
- echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG} || die
- echo "CONFIG_INTERWORKING=y" >> ${CONFIG} || die
- echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG} || die
- echo "CONFIG_HS20=y" >> ${CONFIG} || die
- echo "CONFIG_WNM=y" >> ${CONFIG} || die
- echo "CONFIG_FST=y" >> ${CONFIG} || die
- echo "CONFIG_FST_TEST=y" >> ${CONFIG} || die
- echo "CONFIG_ACS=y" >> ${CONFIG} || die
-
- if use netlink; then
- # Netlink support
- echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG} || die
- fi
-
- if use ipv6; then
- # IPv6 support
- echo "CONFIG_IPV6=y" >> ${CONFIG} || die
- fi
-
- if use sqlite; then
- # Sqlite support
- echo "CONFIG_SQLITE=y" >> ${CONFIG} || die
- fi
-
- # If we are using libnl 2.0 and above, enable support for it
- # Removed for now, since the 3.2 version is broken, and we don't
- # support it.
- if has_version ">=dev-libs/libnl-3.2"; then
- echo "CONFIG_LIBNL32=y" >> ${CONFIG} || die
- append-cflags $($(tc-getPKG_CONFIG) --cflags libnl-3.0)
- fi
-
- # TODO: Add support for BSD drivers
-
- default
-}
-
-src_compile() {
- emake V=1
-
- if ! use internal-tls; then
- emake V=1 nt_password_hash
- emake V=1 hlr_auc_gw
- fi
-}
-
-src_install() {
- insinto /etc/${PN}
- doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
-
- fperms -R 600 /etc/${PN}
-
- dosbin ${PN}
- dobin ${PN}_cli
-
- if ! use internal-tls; then
- dobin nt_password_hash hlr_auc_gw
- fi
-
- newinitd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-init.d ${PN}
- newconfd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-conf.d ${PN}
- systemd_dounit "${WORKDIR}/${EXTRAS_NAME}"/${PN}.service
-
- doman ${PN}{.8,_cli.1}
-
- dodoc ChangeLog README
- use wps && dodoc README-WPS
-
- docinto examples
- dodoc wired.conf
-
- insinto /etc/log.d/conf/services/
- doins logwatch/${PN}.conf
-
- exeinto /etc/log.d/scripts/services/
- doexe logwatch/${PN}
-
- save_config .config
-}
-
-pkg_postinst() {
- einfo
- einfo "If you are running OpenRC you need to follow this instructions:"
- einfo "In order to use ${PN} you need to set up your wireless card"
- einfo "for master mode in /etc/conf.d/net and then start"
- einfo "/etc/init.d/${PN}."
- einfo
- einfo "Example configuration:"
- einfo
- einfo "config_wlan0=( \"192.168.1.1/24\" )"
- einfo "channel_wlan0=\"6\""
- einfo "essid_wlan0=\"test\""
- einfo "mode_wlan0=\"master\""
- einfo
-
- #if [[ -e "${KV_DIR}"/net/mac80211 ]]; then
- # einfo "This package now compiles against the headers installed by"
- # einfo "the kernel source for the mac80211 driver. You should "
- # einfo "re-emerge ${PN} after upgrading your kernel source."
- #fi
-
- if use wps; then
- einfo "You have enabled Wi-Fi Protected Setup support, please"
- einfo "read the README-WPS file in /usr/share/doc/${PF}"
- einfo "for info on how to use WPS"
- fi
-}
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/
@ 2023-06-21 16:17 orbea
0 siblings, 0 replies; 7+ messages in thread
From: orbea @ 2023-06-21 16:17 UTC (permalink / raw
To: gentoo-commits
commit: 74314817bb0ae8af8a9437722e01d91e088a4800
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Wed Jun 21 16:12:37 2023 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Wed Jun 21 16:12:37 2023 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=74314817
net-wireless/hostapd: add 2.10-r1
Signed-off-by: orbea <orbea <AT> riseup.net>
net-wireless/hostapd/hostapd-2.10-r1.ebuild | 265 ++++++++++++++++++++++++++++
1 file changed, 265 insertions(+)
diff --git a/net-wireless/hostapd/hostapd-2.10-r1.ebuild b/net-wireless/hostapd/hostapd-2.10-r1.ebuild
new file mode 100644
index 0000000..b29dfe6
--- /dev/null
+++ b/net-wireless/hostapd/hostapd-2.10-r1.ebuild
@@ -0,0 +1,265 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit flag-o-matic systemd savedconfig toolchain-funcs
+
+EXTRAS_VER="2.7-r2"
+EXTRAS_NAME="${CATEGORY}_${PN}_${EXTRAS_VER}_extras"
+DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
+HOMEPAGE="https://w1.fi/ https://w1.fi/cgit/hostap/"
+SRC_URI="https://dev.gentoo.org/~andrey_utkin/distfiles/${EXTRAS_NAME}.tar.xz"
+S="${S}/${PN}"
+
+if [[ ${PV} == 9999 ]]; then
+ inherit git-r3
+ EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+ if [[ ${PV} =~ ^.*_p[0-9]{8}$ ]]; then
+ SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
+ else
+ SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
+ fi
+
+ # Never stabilize snapshot ebuilds please
+ KEYWORDS="amd64 arm arm64 ~mips ppc x86"
+fi
+
+LICENSE="BSD"
+SLOT="0"
+IUSE="internal-tls ipv6 netlink sqlite +suiteb +wps +crda"
+
+DEPEND="
+ internal-tls? ( dev-libs/libtommath )
+ !internal-tls? ( dev-libs/openssl:0=[-bindist(-)] )
+ kernel_linux? (
+ >=dev-libs/libnl-3.2:3
+ crda? ( net-wireless/crda )
+ )
+ netlink? ( net-libs/libnfnetlink )
+ sqlite? ( >=dev-db/sqlite-3 )"
+RDEPEND="${DEPEND}"
+BDEPEND="virtual/pkgconfig"
+
+PATCHES=( "${FILESDIR}"/${P}-libressl.patch )
+
+pkg_pretend() {
+ if use internal-tls; then
+ ewarn "internal-tls implementation is experimental and provides fewer features"
+ fi
+}
+
+src_unpack() {
+ # Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
+ default
+
+ if [[ ${PV} == 9999 ]] ; then
+ git-r3_src_unpack
+ fi
+}
+
+src_prepare() {
+ # Allow users to apply patches to src/drivers for example,
+ # i.e. anything outside ${S}/${PN}
+ pushd ../ >/dev/null || die
+ default
+ popd >/dev/null || die
+
+ sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
+ "${S}/hostapd.conf" || die
+}
+
+src_configure() {
+ local CONFIG="${S}"/.config
+
+ restore_config "${CONFIG}"
+ if [[ -f "${CONFIG}" ]]; then
+ default
+ return 0
+ fi
+
+ # toolchain setup
+ echo "CC = $(tc-getCC)" > ${CONFIG} || die
+
+ # EAP authentication methods
+ echo "CONFIG_EAP=y" >> ${CONFIG} || die
+ echo "CONFIG_ERP=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_MD5=y" >> ${CONFIG} || die
+
+ if use suiteb; then
+ echo "CONFIG_SUITEB=y" >> ${CONFIG} || die
+ echo "CONFIG_SUITEB192=y" >> ${CONFIG} || die
+ fi
+
+ if use internal-tls ; then
+ echo "CONFIG_TLS=internal" >> ${CONFIG} || die
+ else
+ # SSL authentication methods
+ echo "CONFIG_DPP=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_FAST=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_PWD=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_TLS=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} || die
+ echo "CONFIG_OWE=y" >> ${CONFIG} || die
+ echo "CONFIG_SAE=y" >> ${CONFIG} || die
+ echo "CONFIG_TLSV11=y" >> ${CONFIG} || die
+ echo "CONFIG_TLSV12=y" >> ${CONFIG} || die
+ fi
+
+ if use wps; then
+ # Enable Wi-Fi Protected Setup
+ echo "CONFIG_WPS=y" >> ${CONFIG} || die
+ echo "CONFIG_WPS2=y" >> ${CONFIG} || die
+ echo "CONFIG_WPS_UPNP=y" >> ${CONFIG} || die
+ echo "CONFIG_WPS_NFC=y" >> ${CONFIG} || die
+ einfo "Enabling Wi-Fi Protected Setup support"
+ fi
+
+ echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_TNC=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_GTC=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_SIM=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_AKA=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_EKE=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_PAX=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_PSK=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_SAKE=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_GPSK=y" >> ${CONFIG} || die
+ echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG} || die
+
+ einfo "Enabling drivers: "
+
+ # drivers
+ echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG} || die
+ einfo " HostAP driver enabled"
+ echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG} || die
+ einfo " Wired driver enabled"
+ echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG} || die
+ einfo " None driver enabled"
+
+ einfo " nl80211 driver enabled"
+ echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG} || die
+
+ # epoll
+ echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG} || die
+
+ # misc
+ echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG} || die
+ echo "CONFIG_PKCS12=y" >> ${CONFIG} || die
+ echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG} || die
+ echo "CONFIG_IAPP=y" >> ${CONFIG} || die
+ echo "CONFIG_IEEE80211R=y" >> ${CONFIG} || die
+ echo "CONFIG_IEEE80211W=y" >> ${CONFIG} || die
+ echo "CONFIG_IEEE80211N=y" >> ${CONFIG} || die
+ echo "CONFIG_IEEE80211AC=y" >> ${CONFIG} || die
+ echo "CONFIG_IEEE80211AX=y" >> ${CONFIG} || die
+ echo "CONFIG_OCV=y" >> ${CONFIG} || die
+ echo "CONFIG_PEERKEY=y" >> ${CONFIG} || die
+ echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG} || die
+ echo "CONFIG_INTERWORKING=y" >> ${CONFIG} || die
+ echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG} || die
+ echo "CONFIG_HS20=y" >> ${CONFIG} || die
+ echo "CONFIG_WNM=y" >> ${CONFIG} || die
+ echo "CONFIG_FST=y" >> ${CONFIG} || die
+ echo "CONFIG_FST_TEST=y" >> ${CONFIG} || die
+ echo "CONFIG_ACS=y" >> ${CONFIG} || die
+
+ if use netlink; then
+ # Netlink support
+ echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG} || die
+ fi
+
+ if use ipv6; then
+ # IPv6 support
+ echo "CONFIG_IPV6=y" >> ${CONFIG} || die
+ fi
+
+ if use sqlite; then
+ # Sqlite support
+ echo "CONFIG_SQLITE=y" >> ${CONFIG} || die
+ fi
+
+ if use kernel_linux; then
+ echo "CONFIG_LIBNL32=y" >> ${CONFIG} || die
+ append-cflags $($(tc-getPKG_CONFIG) --cflags libnl-3.0)
+ fi
+
+ # TODO: Add support for BSD drivers
+
+ default
+}
+
+src_compile() {
+ emake V=1
+
+ if ! use internal-tls; then
+ emake V=1 nt_password_hash
+ emake V=1 hlr_auc_gw
+ fi
+}
+
+src_install() {
+ insinto /etc/${PN}
+ doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
+
+ fperms -R 600 /etc/${PN}
+
+ dosbin ${PN}
+ dobin ${PN}_cli
+
+ if ! use internal-tls; then
+ dobin nt_password_hash hlr_auc_gw
+ fi
+
+ newinitd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-init.d ${PN}
+ newconfd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-conf.d ${PN}
+ systemd_dounit "${WORKDIR}/${EXTRAS_NAME}"/${PN}.service
+
+ doman ${PN}{.8,_cli.1}
+
+ dodoc ChangeLog README
+ use wps && dodoc README-WPS
+
+ docinto examples
+ dodoc wired.conf
+
+ insinto /etc/log.d/conf/services/
+ doins logwatch/${PN}.conf
+
+ exeinto /etc/log.d/scripts/services/
+ doexe logwatch/${PN}
+
+ save_config .config
+}
+
+pkg_postinst() {
+ einfo
+ einfo "If you are running OpenRC you need to follow this instructions:"
+ einfo "In order to use ${PN} you need to set up your wireless card"
+ einfo "for master mode in /etc/conf.d/net and then start"
+ einfo "/etc/init.d/${PN}."
+ einfo
+ einfo "Example configuration:"
+ einfo
+ einfo "config_wlan0=( \"192.168.1.1/24\" )"
+ einfo "channel_wlan0=\"6\""
+ einfo "essid_wlan0=\"test\""
+ einfo "mode_wlan0=\"master\""
+ einfo
+
+ #if [[ -e "${KV_DIR}"/net/mac80211 ]]; then
+ # einfo "This package now compiles against the headers installed by"
+ # einfo "the kernel source for the mac80211 driver. You should "
+ # einfo "re-emerge ${PN} after upgrading your kernel source."
+ #fi
+
+ if use wps; then
+ einfo "You have enabled Wi-Fi Protected Setup support, please"
+ einfo "read the README-WPS file in /usr/share/doc/${PF}"
+ einfo "for info on how to use WPS"
+ fi
+}
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/
@ 2023-06-28 1:12 orbea
0 siblings, 0 replies; 7+ messages in thread
From: orbea @ 2023-06-28 1:12 UTC (permalink / raw
To: gentoo-commits
commit: 2215a673ac5b5a8c6d25e0a03449e1fd6e0e4e15
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Wed Jun 28 00:48:33 2023 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Wed Jun 28 00:48:33 2023 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=2215a673
net-wireless/hostapd: merge ::gentoo changes
Signed-off-by: orbea <orbea <AT> riseup.net>
net-wireless/hostapd/hostapd-2.10.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net-wireless/hostapd/hostapd-2.10.ebuild b/net-wireless/hostapd/hostapd-2.10.ebuild
index 86fc6e9..64f4401 100644
--- a/net-wireless/hostapd/hostapd-2.10.ebuild
+++ b/net-wireless/hostapd/hostapd-2.10.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2022 Gentoo Authors
+# Copyright 1999-2023 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/
@ 2023-07-04 3:42 orbea
0 siblings, 0 replies; 7+ messages in thread
From: orbea @ 2023-07-04 3:42 UTC (permalink / raw
To: gentoo-commits
commit: 75591dd40fef05e447b93e0072ab076dd07b5ed3
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Tue Jul 4 03:41:27 2023 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Tue Jul 4 03:41:27 2023 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=75591dd4
net-wireless/hostapd: sync ::gentoo
Signed-off-by: orbea <orbea <AT> riseup.net>
net-wireless/hostapd/hostapd-2.10-r1.ebuild | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/net-wireless/hostapd/hostapd-2.10-r1.ebuild b/net-wireless/hostapd/hostapd-2.10-r1.ebuild
index b29dfe6..eb6b8bd 100644
--- a/net-wireless/hostapd/hostapd-2.10-r1.ebuild
+++ b/net-wireless/hostapd/hostapd-2.10-r1.ebuild
@@ -28,7 +28,7 @@ fi
LICENSE="BSD"
SLOT="0"
-IUSE="internal-tls ipv6 netlink sqlite +suiteb +wps +crda"
+IUSE="internal-tls ipv6 netlink selinux sqlite +suiteb +wps +crda"
DEPEND="
internal-tls? ( dev-libs/libtommath )
@@ -38,8 +38,12 @@ DEPEND="
crda? ( net-wireless/crda )
)
netlink? ( net-libs/libnfnetlink )
- sqlite? ( >=dev-db/sqlite-3 )"
-RDEPEND="${DEPEND}"
+ sqlite? ( >=dev-db/sqlite-3 )
+"
+RDEPEND="
+ ${DEPEND}
+ selinux? ( sec-policy/selinux-hostapd )
+"
BDEPEND="virtual/pkgconfig"
PATCHES=( "${FILESDIR}"/${P}-libressl.patch )
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/
@ 2023-08-24 15:53 orbea
0 siblings, 0 replies; 7+ messages in thread
From: orbea @ 2023-08-24 15:53 UTC (permalink / raw
To: gentoo-commits
commit: d46ede563cd802b594532ab94817886d45e40cd9
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Thu Aug 24 15:41:52 2023 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Thu Aug 24 15:41:52 2023 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=d46ede56
net-wireless/hostapd: add 2.10-r2, drop 2.10
Signed-off-by: orbea <orbea <AT> riseup.net>
.../{hostapd-2.10.ebuild => hostapd-2.10-r2.ebuild} | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/net-wireless/hostapd/hostapd-2.10.ebuild b/net-wireless/hostapd/hostapd-2.10-r2.ebuild
similarity index 95%
rename from net-wireless/hostapd/hostapd-2.10.ebuild
rename to net-wireless/hostapd/hostapd-2.10-r2.ebuild
index 64f4401..2c2844c 100644
--- a/net-wireless/hostapd/hostapd-2.10.ebuild
+++ b/net-wireless/hostapd/hostapd-2.10-r2.ebuild
@@ -1,7 +1,7 @@
# Copyright 1999-2023 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
-EAPI=7
+EAPI=8
inherit flag-o-matic systemd savedconfig toolchain-funcs
@@ -23,28 +23,30 @@ else
fi
# Never stabilize snapshot ebuilds please
- KEYWORDS="amd64 arm arm64 ~mips ppc x86"
+ KEYWORDS="~amd64 ~arm ~arm64 ~mips ~ppc ~x86"
fi
LICENSE="BSD"
SLOT="0"
-IUSE="internal-tls ipv6 netlink sqlite +suiteb +wps +crda"
+IUSE="internal-tls ipv6 netlink selinux sqlite +suiteb +wps"
DEPEND="
internal-tls? ( dev-libs/libtommath )
!internal-tls? ( dev-libs/openssl:0=[-bindist(-)] )
kernel_linux? (
+ net-wireless/wireless-regdb
>=dev-libs/libnl-3.2:3
- crda? ( net-wireless/crda )
)
netlink? ( net-libs/libnfnetlink )
- sqlite? ( >=dev-db/sqlite-3 )"
-RDEPEND="${DEPEND}"
+ sqlite? ( dev-db/sqlite:3 )
+"
+RDEPEND="
+ ${DEPEND}
+ selinux? ( sec-policy/selinux-hostapd )
+"
BDEPEND="virtual/pkgconfig"
-PATCHES=(
- "${FILESDIR}"/${P}-libressl.patch
-)
+PATCHES=( "${FILESDIR}"/${P}-libressl.patch )
pkg_pretend() {
if use internal-tls; then
@@ -158,6 +160,7 @@ src_configure() {
echo "CONFIG_IEEE80211W=y" >> ${CONFIG} || die
echo "CONFIG_IEEE80211N=y" >> ${CONFIG} || die
echo "CONFIG_IEEE80211AC=y" >> ${CONFIG} || die
+ echo "CONFIG_IEEE80211AX=y" >> ${CONFIG} || die
echo "CONFIG_OCV=y" >> ${CONFIG} || die
echo "CONFIG_PEERKEY=y" >> ${CONFIG} || die
echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG} || die
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/
@ 2024-01-14 21:44 orbea
0 siblings, 0 replies; 7+ messages in thread
From: orbea @ 2024-01-14 21:44 UTC (permalink / raw
To: gentoo-commits
commit: 4855b1eb7f4cbcabbd44c377ebfe6879c10d0fa4
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Sun Jan 14 21:23:03 2024 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Sun Jan 14 21:23:52 2024 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=4855b1eb
net-wireless/hostapd: drop 2.10-r1, 2.10-r2
Signed-off-by: orbea <orbea <AT> riseup.net>
net-wireless/hostapd/Manifest | 1 -
net-wireless/hostapd/hostapd-2.10-r1.ebuild | 269 ----------------------------
net-wireless/hostapd/hostapd-2.10-r2.ebuild | 269 ----------------------------
net-wireless/hostapd/metadata.xml | 1 -
4 files changed, 540 deletions(-)
diff --git a/net-wireless/hostapd/Manifest b/net-wireless/hostapd/Manifest
index 6bcebd0..c70e377 100644
--- a/net-wireless/hostapd/Manifest
+++ b/net-wireless/hostapd/Manifest
@@ -1,2 +1 @@
DIST hostapd-2.10.tar.gz 2440435 BLAKE2B dbeeae2f62a8ab52df3e2d05ff0467b643cd68349ef3b28814a11dfb67d4b23d14cf2461a3040694706ec614fcd7c2e0fe58f3597e877cf47296cd75e11c792f SHA512 243baa82d621f859d2507d8d5beb0ebda15a75548a62451dc9bca42717dcc8607adac49b354919a41d8257d16d07ac7268203a79750db0cfb34b51f80ff1ce8f
-DIST net-wireless_hostapd_2.7-r2_extras.tar.xz 1820 BLAKE2B 5c4daf0e4fcf5ae0803cdbe2aabcc75e89b1e92048e8a01894d73639a16b049174b37eca6b6206c337a2874a6e6d5588d50fa5b8a4813e7f6c22bf02efca852f SHA512 65bc4634c8314280ceab44d1f5d6d62092f4bca48253f107b076211020f6f6502388490aee907f9910846a25ba2da7e4122bdb1873eb2b12bf94e867e3295f4c
diff --git a/net-wireless/hostapd/hostapd-2.10-r1.ebuild b/net-wireless/hostapd/hostapd-2.10-r1.ebuild
deleted file mode 100644
index eb6b8bd..0000000
--- a/net-wireless/hostapd/hostapd-2.10-r1.ebuild
+++ /dev/null
@@ -1,269 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit flag-o-matic systemd savedconfig toolchain-funcs
-
-EXTRAS_VER="2.7-r2"
-EXTRAS_NAME="${CATEGORY}_${PN}_${EXTRAS_VER}_extras"
-DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
-HOMEPAGE="https://w1.fi/ https://w1.fi/cgit/hostap/"
-SRC_URI="https://dev.gentoo.org/~andrey_utkin/distfiles/${EXTRAS_NAME}.tar.xz"
-S="${S}/${PN}"
-
-if [[ ${PV} == 9999 ]]; then
- inherit git-r3
- EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
- if [[ ${PV} =~ ^.*_p[0-9]{8}$ ]]; then
- SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
- else
- SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
- fi
-
- # Never stabilize snapshot ebuilds please
- KEYWORDS="amd64 arm arm64 ~mips ppc x86"
-fi
-
-LICENSE="BSD"
-SLOT="0"
-IUSE="internal-tls ipv6 netlink selinux sqlite +suiteb +wps +crda"
-
-DEPEND="
- internal-tls? ( dev-libs/libtommath )
- !internal-tls? ( dev-libs/openssl:0=[-bindist(-)] )
- kernel_linux? (
- >=dev-libs/libnl-3.2:3
- crda? ( net-wireless/crda )
- )
- netlink? ( net-libs/libnfnetlink )
- sqlite? ( >=dev-db/sqlite-3 )
-"
-RDEPEND="
- ${DEPEND}
- selinux? ( sec-policy/selinux-hostapd )
-"
-BDEPEND="virtual/pkgconfig"
-
-PATCHES=( "${FILESDIR}"/${P}-libressl.patch )
-
-pkg_pretend() {
- if use internal-tls; then
- ewarn "internal-tls implementation is experimental and provides fewer features"
- fi
-}
-
-src_unpack() {
- # Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
- default
-
- if [[ ${PV} == 9999 ]] ; then
- git-r3_src_unpack
- fi
-}
-
-src_prepare() {
- # Allow users to apply patches to src/drivers for example,
- # i.e. anything outside ${S}/${PN}
- pushd ../ >/dev/null || die
- default
- popd >/dev/null || die
-
- sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
- "${S}/hostapd.conf" || die
-}
-
-src_configure() {
- local CONFIG="${S}"/.config
-
- restore_config "${CONFIG}"
- if [[ -f "${CONFIG}" ]]; then
- default
- return 0
- fi
-
- # toolchain setup
- echo "CC = $(tc-getCC)" > ${CONFIG} || die
-
- # EAP authentication methods
- echo "CONFIG_EAP=y" >> ${CONFIG} || die
- echo "CONFIG_ERP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_MD5=y" >> ${CONFIG} || die
-
- if use suiteb; then
- echo "CONFIG_SUITEB=y" >> ${CONFIG} || die
- echo "CONFIG_SUITEB192=y" >> ${CONFIG} || die
- fi
-
- if use internal-tls ; then
- echo "CONFIG_TLS=internal" >> ${CONFIG} || die
- else
- # SSL authentication methods
- echo "CONFIG_DPP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_FAST=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PWD=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TLS=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} || die
- echo "CONFIG_OWE=y" >> ${CONFIG} || die
- echo "CONFIG_SAE=y" >> ${CONFIG} || die
- echo "CONFIG_TLSV11=y" >> ${CONFIG} || die
- echo "CONFIG_TLSV12=y" >> ${CONFIG} || die
- fi
-
- if use wps; then
- # Enable Wi-Fi Protected Setup
- echo "CONFIG_WPS=y" >> ${CONFIG} || die
- echo "CONFIG_WPS2=y" >> ${CONFIG} || die
- echo "CONFIG_WPS_UPNP=y" >> ${CONFIG} || die
- echo "CONFIG_WPS_NFC=y" >> ${CONFIG} || die
- einfo "Enabling Wi-Fi Protected Setup support"
- fi
-
- echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TNC=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_GTC=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_SIM=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_AKA=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_EKE=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PAX=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PSK=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_SAKE=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_GPSK=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG} || die
-
- einfo "Enabling drivers: "
-
- # drivers
- echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG} || die
- einfo " HostAP driver enabled"
- echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG} || die
- einfo " Wired driver enabled"
- echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG} || die
- einfo " None driver enabled"
-
- einfo " nl80211 driver enabled"
- echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG} || die
-
- # epoll
- echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG} || die
-
- # misc
- echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG} || die
- echo "CONFIG_PKCS12=y" >> ${CONFIG} || die
- echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG} || die
- echo "CONFIG_IAPP=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211R=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211W=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211N=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211AC=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211AX=y" >> ${CONFIG} || die
- echo "CONFIG_OCV=y" >> ${CONFIG} || die
- echo "CONFIG_PEERKEY=y" >> ${CONFIG} || die
- echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG} || die
- echo "CONFIG_INTERWORKING=y" >> ${CONFIG} || die
- echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG} || die
- echo "CONFIG_HS20=y" >> ${CONFIG} || die
- echo "CONFIG_WNM=y" >> ${CONFIG} || die
- echo "CONFIG_FST=y" >> ${CONFIG} || die
- echo "CONFIG_FST_TEST=y" >> ${CONFIG} || die
- echo "CONFIG_ACS=y" >> ${CONFIG} || die
-
- if use netlink; then
- # Netlink support
- echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG} || die
- fi
-
- if use ipv6; then
- # IPv6 support
- echo "CONFIG_IPV6=y" >> ${CONFIG} || die
- fi
-
- if use sqlite; then
- # Sqlite support
- echo "CONFIG_SQLITE=y" >> ${CONFIG} || die
- fi
-
- if use kernel_linux; then
- echo "CONFIG_LIBNL32=y" >> ${CONFIG} || die
- append-cflags $($(tc-getPKG_CONFIG) --cflags libnl-3.0)
- fi
-
- # TODO: Add support for BSD drivers
-
- default
-}
-
-src_compile() {
- emake V=1
-
- if ! use internal-tls; then
- emake V=1 nt_password_hash
- emake V=1 hlr_auc_gw
- fi
-}
-
-src_install() {
- insinto /etc/${PN}
- doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
-
- fperms -R 600 /etc/${PN}
-
- dosbin ${PN}
- dobin ${PN}_cli
-
- if ! use internal-tls; then
- dobin nt_password_hash hlr_auc_gw
- fi
-
- newinitd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-init.d ${PN}
- newconfd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-conf.d ${PN}
- systemd_dounit "${WORKDIR}/${EXTRAS_NAME}"/${PN}.service
-
- doman ${PN}{.8,_cli.1}
-
- dodoc ChangeLog README
- use wps && dodoc README-WPS
-
- docinto examples
- dodoc wired.conf
-
- insinto /etc/log.d/conf/services/
- doins logwatch/${PN}.conf
-
- exeinto /etc/log.d/scripts/services/
- doexe logwatch/${PN}
-
- save_config .config
-}
-
-pkg_postinst() {
- einfo
- einfo "If you are running OpenRC you need to follow this instructions:"
- einfo "In order to use ${PN} you need to set up your wireless card"
- einfo "for master mode in /etc/conf.d/net and then start"
- einfo "/etc/init.d/${PN}."
- einfo
- einfo "Example configuration:"
- einfo
- einfo "config_wlan0=( \"192.168.1.1/24\" )"
- einfo "channel_wlan0=\"6\""
- einfo "essid_wlan0=\"test\""
- einfo "mode_wlan0=\"master\""
- einfo
-
- #if [[ -e "${KV_DIR}"/net/mac80211 ]]; then
- # einfo "This package now compiles against the headers installed by"
- # einfo "the kernel source for the mac80211 driver. You should "
- # einfo "re-emerge ${PN} after upgrading your kernel source."
- #fi
-
- if use wps; then
- einfo "You have enabled Wi-Fi Protected Setup support, please"
- einfo "read the README-WPS file in /usr/share/doc/${PF}"
- einfo "for info on how to use WPS"
- fi
-}
diff --git a/net-wireless/hostapd/hostapd-2.10-r2.ebuild b/net-wireless/hostapd/hostapd-2.10-r2.ebuild
deleted file mode 100644
index 2c2844c..0000000
--- a/net-wireless/hostapd/hostapd-2.10-r2.ebuild
+++ /dev/null
@@ -1,269 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit flag-o-matic systemd savedconfig toolchain-funcs
-
-EXTRAS_VER="2.7-r2"
-EXTRAS_NAME="${CATEGORY}_${PN}_${EXTRAS_VER}_extras"
-DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
-HOMEPAGE="https://w1.fi/ https://w1.fi/cgit/hostap/"
-SRC_URI="https://dev.gentoo.org/~andrey_utkin/distfiles/${EXTRAS_NAME}.tar.xz"
-S="${S}/${PN}"
-
-if [[ ${PV} == 9999 ]]; then
- inherit git-r3
- EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
- if [[ ${PV} =~ ^.*_p[0-9]{8}$ ]]; then
- SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
- else
- SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
- fi
-
- # Never stabilize snapshot ebuilds please
- KEYWORDS="~amd64 ~arm ~arm64 ~mips ~ppc ~x86"
-fi
-
-LICENSE="BSD"
-SLOT="0"
-IUSE="internal-tls ipv6 netlink selinux sqlite +suiteb +wps"
-
-DEPEND="
- internal-tls? ( dev-libs/libtommath )
- !internal-tls? ( dev-libs/openssl:0=[-bindist(-)] )
- kernel_linux? (
- net-wireless/wireless-regdb
- >=dev-libs/libnl-3.2:3
- )
- netlink? ( net-libs/libnfnetlink )
- sqlite? ( dev-db/sqlite:3 )
-"
-RDEPEND="
- ${DEPEND}
- selinux? ( sec-policy/selinux-hostapd )
-"
-BDEPEND="virtual/pkgconfig"
-
-PATCHES=( "${FILESDIR}"/${P}-libressl.patch )
-
-pkg_pretend() {
- if use internal-tls; then
- ewarn "internal-tls implementation is experimental and provides fewer features"
- fi
-}
-
-src_unpack() {
- # Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
- default
-
- if [[ ${PV} == 9999 ]] ; then
- git-r3_src_unpack
- fi
-}
-
-src_prepare() {
- # Allow users to apply patches to src/drivers for example,
- # i.e. anything outside ${S}/${PN}
- pushd ../ >/dev/null || die
- default
- popd >/dev/null || die
-
- sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
- "${S}/hostapd.conf" || die
-}
-
-src_configure() {
- local CONFIG="${S}"/.config
-
- restore_config "${CONFIG}"
- if [[ -f "${CONFIG}" ]]; then
- default
- return 0
- fi
-
- # toolchain setup
- echo "CC = $(tc-getCC)" > ${CONFIG} || die
-
- # EAP authentication methods
- echo "CONFIG_EAP=y" >> ${CONFIG} || die
- echo "CONFIG_ERP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_MD5=y" >> ${CONFIG} || die
-
- if use suiteb; then
- echo "CONFIG_SUITEB=y" >> ${CONFIG} || die
- echo "CONFIG_SUITEB192=y" >> ${CONFIG} || die
- fi
-
- if use internal-tls ; then
- echo "CONFIG_TLS=internal" >> ${CONFIG} || die
- else
- # SSL authentication methods
- echo "CONFIG_DPP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_FAST=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PWD=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TLS=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} || die
- echo "CONFIG_OWE=y" >> ${CONFIG} || die
- echo "CONFIG_SAE=y" >> ${CONFIG} || die
- echo "CONFIG_TLSV11=y" >> ${CONFIG} || die
- echo "CONFIG_TLSV12=y" >> ${CONFIG} || die
- fi
-
- if use wps; then
- # Enable Wi-Fi Protected Setup
- echo "CONFIG_WPS=y" >> ${CONFIG} || die
- echo "CONFIG_WPS2=y" >> ${CONFIG} || die
- echo "CONFIG_WPS_UPNP=y" >> ${CONFIG} || die
- echo "CONFIG_WPS_NFC=y" >> ${CONFIG} || die
- einfo "Enabling Wi-Fi Protected Setup support"
- fi
-
- echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_TNC=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_GTC=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_SIM=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_AKA=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_EKE=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PAX=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_PSK=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_SAKE=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_GPSK=y" >> ${CONFIG} || die
- echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG} || die
-
- einfo "Enabling drivers: "
-
- # drivers
- echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG} || die
- einfo " HostAP driver enabled"
- echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG} || die
- einfo " Wired driver enabled"
- echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG} || die
- einfo " None driver enabled"
-
- einfo " nl80211 driver enabled"
- echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG} || die
-
- # epoll
- echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG} || die
-
- # misc
- echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG} || die
- echo "CONFIG_PKCS12=y" >> ${CONFIG} || die
- echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG} || die
- echo "CONFIG_IAPP=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211R=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211W=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211N=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211AC=y" >> ${CONFIG} || die
- echo "CONFIG_IEEE80211AX=y" >> ${CONFIG} || die
- echo "CONFIG_OCV=y" >> ${CONFIG} || die
- echo "CONFIG_PEERKEY=y" >> ${CONFIG} || die
- echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG} || die
- echo "CONFIG_INTERWORKING=y" >> ${CONFIG} || die
- echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG} || die
- echo "CONFIG_HS20=y" >> ${CONFIG} || die
- echo "CONFIG_WNM=y" >> ${CONFIG} || die
- echo "CONFIG_FST=y" >> ${CONFIG} || die
- echo "CONFIG_FST_TEST=y" >> ${CONFIG} || die
- echo "CONFIG_ACS=y" >> ${CONFIG} || die
-
- if use netlink; then
- # Netlink support
- echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG} || die
- fi
-
- if use ipv6; then
- # IPv6 support
- echo "CONFIG_IPV6=y" >> ${CONFIG} || die
- fi
-
- if use sqlite; then
- # Sqlite support
- echo "CONFIG_SQLITE=y" >> ${CONFIG} || die
- fi
-
- if use kernel_linux; then
- echo "CONFIG_LIBNL32=y" >> ${CONFIG} || die
- append-cflags $($(tc-getPKG_CONFIG) --cflags libnl-3.0)
- fi
-
- # TODO: Add support for BSD drivers
-
- default
-}
-
-src_compile() {
- emake V=1
-
- if ! use internal-tls; then
- emake V=1 nt_password_hash
- emake V=1 hlr_auc_gw
- fi
-}
-
-src_install() {
- insinto /etc/${PN}
- doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
-
- fperms -R 600 /etc/${PN}
-
- dosbin ${PN}
- dobin ${PN}_cli
-
- if ! use internal-tls; then
- dobin nt_password_hash hlr_auc_gw
- fi
-
- newinitd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-init.d ${PN}
- newconfd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-conf.d ${PN}
- systemd_dounit "${WORKDIR}/${EXTRAS_NAME}"/${PN}.service
-
- doman ${PN}{.8,_cli.1}
-
- dodoc ChangeLog README
- use wps && dodoc README-WPS
-
- docinto examples
- dodoc wired.conf
-
- insinto /etc/log.d/conf/services/
- doins logwatch/${PN}.conf
-
- exeinto /etc/log.d/scripts/services/
- doexe logwatch/${PN}
-
- save_config .config
-}
-
-pkg_postinst() {
- einfo
- einfo "If you are running OpenRC you need to follow this instructions:"
- einfo "In order to use ${PN} you need to set up your wireless card"
- einfo "for master mode in /etc/conf.d/net and then start"
- einfo "/etc/init.d/${PN}."
- einfo
- einfo "Example configuration:"
- einfo
- einfo "config_wlan0=( \"192.168.1.1/24\" )"
- einfo "channel_wlan0=\"6\""
- einfo "essid_wlan0=\"test\""
- einfo "mode_wlan0=\"master\""
- einfo
-
- #if [[ -e "${KV_DIR}"/net/mac80211 ]]; then
- # einfo "This package now compiles against the headers installed by"
- # einfo "the kernel source for the mac80211 driver. You should "
- # einfo "re-emerge ${PN} after upgrading your kernel source."
- #fi
-
- if use wps; then
- einfo "You have enabled Wi-Fi Protected Setup support, please"
- einfo "read the README-WPS file in /usr/share/doc/${PF}"
- einfo "for info on how to use WPS"
- fi
-}
diff --git a/net-wireless/hostapd/metadata.xml b/net-wireless/hostapd/metadata.xml
index c002212..35e021e 100644
--- a/net-wireless/hostapd/metadata.xml
+++ b/net-wireless/hostapd/metadata.xml
@@ -7,7 +7,6 @@
RADIUS Authentication client, RADIUS Accounting client
</longdescription>
<use>
- <flag name="crda">Add CRDA support</flag>
<flag name="internal-tls">Use internal TLSv1 implementation instead of depending on OpenSSL or GnuTLS</flag>
<flag name="netlink">Adding support for using netlink to create VLANs</flag>
<flag name="suiteb">Adding support for NSA Suite B Cryptography</flag>
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2024-01-14 21:44 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-06-28 1:12 [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/ orbea
-- strict thread matches above, loose matches on Subject: below --
2024-01-14 21:44 orbea
2023-08-24 15:53 orbea
2023-07-04 3:42 orbea
2023-06-21 16:17 orbea
2023-04-12 2:16 orbea
2021-05-03 0:07 Quentin Retornaz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox