[gentoo-commits] repo/gentoo:master commit in: sci-misc/ncview/files/, sci-misc/ncview/

[gentoo-commits] repo/gentoo:master commit in: sci-misc/ncview/files/, sci-misc/ncview/

[David Seifert]

commit:     f8935fe091b274b52843192ec4aa489fe267ea9d
Author:     David Seifert <soap <AT> gentoo <DOT> org>
AuthorDate: Mon Dec 26 12:52:14 2022 +0000
Commit:     David Seifert <soap <AT> gentoo <DOT> org>
CommitDate: Mon Dec 26 12:52:14 2022 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f8935fe0

sci-misc/ncview: add 2.1.8

Bug: https://bugs.gentoo.org/741584
Bug: https://bugs.gentoo.org/828639
Signed-off-by: David Seifert <soap <AT> gentoo.org>

 sci-misc/ncview/Manifest                           |   1 +
 sci-misc/ncview/files/ncview-2.1.8-autotools.patch | 110 +++++++++++++++++++++
 sci-misc/ncview/ncview-2.1.8.ebuild                |  43 ++++++++
 3 files changed, 154 insertions(+)

diff --git a/sci-misc/ncview/Manifest b/sci-misc/ncview/Manifest
index ef1c5c242779..9bc6f2ecb699 100644
--- a/sci-misc/ncview/Manifest
+++ b/sci-misc/ncview/Manifest
@@ -1 +1,2 @@
 DIST ncview-2.1.7.tar.gz 1280624 BLAKE2B a3a69ee79443bef68b51ac9e8f9693a6720eec1e1cc03c91f3cf90883f7722d0eec6b2e06e6d6f8bcc3a4e18f2403446cb9b84d9ce2a258beb8b8c7109187ed8 SHA512 c39b26e8453f91865e8483abc6ee25d804150dd03ad21469c0e22a60b41f182c108678e22eb86652b66e8ca0997b5f533b2542593f793d673eeeab73b81eaef7
+DIST ncview-2.1.8.tar.gz 1267792 BLAKE2B 16d0cf4ef827d41a2f1773292839b1795934b346d2f52a6c3a8eeb50260e836822fbbc7245342664629cf256b4270426d4c89c0f848e95fddcf3de043c53cde3 SHA512 2567aa361b365c3788069d81bb7f890d5f244c387fa3ce70c78bcf4487c852d4ac4f93f0b0e3d821f8ae5816073cef654b659c8a3856f1d12fb0d80dfba92fc4

diff --git a/sci-misc/ncview/files/ncview-2.1.8-autotools.patch b/sci-misc/ncview/files/ncview-2.1.8-autotools.patch
new file mode 100644
index 000000000000..9a8fef2f7136
--- /dev/null
+++ b/sci-misc/ncview/files/ncview-2.1.8-autotools.patch
@@ -0,0 +1,110 @@
+--- a/configure.in
++++ b/configure.in
+@@ -8,6 +8,7 @@
+ m4_define([ncview_release_date],[15 Feb 2010])
+ 
+ AC_INIT([ncview],[ncview_version],[dpierce@ucsd.edu])
++AC_CONFIG_MACRO_DIR([m4macros])
+ 
+ # Handle netcdf
+ AC_PATH_NETCDF
+@@ -30,13 +31,11 @@
+ # we have to specifically check if the same compiler used to compile the
+ # netcdf library exists.
+ #------------------------------------------------------------------------
+-AC_PROG_CC( $NETCDF_CC )
+-AC_ISC_POSIX
+-AC_HEADER_STDC
++AC_PROG_CC
+ 
+ 
+-AC_CONFIG_HEADER(config.h)
+-AM_INIT_AUTOMAKE([ncview],[ncview_version])
++AC_CONFIG_HEADERS(config.h)
++AM_INIT_AUTOMAKE
+ 
+ AC_PATH_X
+ if test "x$no_x" == "xyes"; then
+@@ -206,82 +205,6 @@
+ AC_SUBST(X_INCLUDES)
+ 
+ 
+-#----------------------------------------------------------------------------
+-# We want to test if the same compiler was used for the netcdf library as for
+-# ncview.  This might be complicated by the fact that often "gcc" and "cc"
+-# end up invoking the same compiler.  Use an ugly hack that I have no idea
+-# if it generally works or not.  Probably not.
+-#----------------------------------------------------------------------------
+-CC_TEST_SAME=$CC
+-#-----------------------------------------------------------------------
+-# Point of following obscure manipulations is that $CC can have multiple
+-# words, for example, it could be "gcc -fPIC -lm". We want to keep only
+-# the first word, so use 'set' and then take the first arg ($1).
+-#-----------------------------------------------------------------------
+-set $CC_TEST_SAME
+-CC_TEST_SAME=$1
+-if test x$CC_TEST_SAME = xcc; then
+-	CC_TEST_SAME=gcc			
+-fi
+-NETCDF_CC_TEST_SAME=$NETCDF_CC
+-set $NETCDF_CC_TEST_SAME
+-NETCDF_CC_TEST_SAME=$1
+-if test x$NETCDF_CC_TEST_SAME = xcc; then
+-	NETCDF_CC_TEST_SAME=gcc
+-fi
+-if test x$CC_TEST_SAME != x$NETCDF_CC_TEST_SAME; then
+-	echo "======================================================================"
+-	echo "Configuration error: You specified that the \"$CC\" C compiler should be"
+-	echo "used to build ncview, but the netcdf library was compiled with the \"$NETCDF_CC\""
+-	echo "compiler.  Here is the path where I found the netcdf library:"
+-	echo "     $NETCDF_LDFLAGS"
+-	echo "You must use the same compiler for ncview as was used to build the netcdf library!"
+-	echo " "
+-	echo "There are two possible ways to fix this."
+-	echo " "
+-	echo "1) Download the netcdf library and compile it with the $CC compiler,"
+-	echo "install it, and try again to build ncview.  NOTE that if you do this,"
+-	echo "you might have more than one version of the netcdf library on your system,"
+-	echo "built with differnt compilers, which can get confusing.  If you do this,"
+-	echo "you will have to specify the path to the (new) version of nc-config"
+-	echo "that was compiled using the $CC compiler by configuring ncview in a "
+-	echo "way similar to this:"
+-	echo " "
+-	echo "   ./configure --with-nc-config=/path/to/newly/compiled/nc-config"
+-	echo " "
+-	echo "2) Configure ncview to use the $NETCDF_CC compiler."
+-	echo "To do this, set environmental variable CC to $NETCDF_CC"
+-	echo "and run ./configure again"
+-	echo "==================================================================="
+-	exit -1
+-fi
+-
+-#----------------------------------------------------------------------------------
+-# Construct our RPATH flags.  Idea here is that we have LDFLAGS that might look,
+-# for example, something like this:
+-#	LIBS="-L/usr/local/lib -lnetcdf -L/home/pierce/lib -ludunits"
+-# We want to convert this to -rpath flags suitable for the compiler, which would
+-# have this format:
+-#	"-Wl,-rpath,/usr/local/lib -Wl,-rpath,/home/pierce/lib"
+-#
+-# As a safety check, I only do this for the GNU compiler, as I don't know if this
+-# is anything like correct syntax for other compilers.  Note that this *does* work
+-# for the Intel icc compiler, but also that the icc compiler sets $ac_compiler_gnu
+-# to "yes".  Go figure.
+-#----------------------------------------------------------------------------------
+-echo "ac_computer_gnu: $ac_compiler_gnu"
+-if test x$ac_compiler_gnu = xyes; then
+-	RPATH_FLAGS=""
+-	for word in $UDUNITS2_LDFLAGS $NETCDF_LDFLAGS; do
+-		if test `expr $word : -L/` -eq 3; then
+-			#RPDIR=`expr substr $word 3 999`;
+-			RPDIR=${word:2}
+-			RPATH_FLAGS="$RPATH_FLAGS -Wl,-rpath,$RPDIR"
+-		fi
+-	done
+-	AC_SUBST(RPATH_FLAGS)
+-fi
+-
+ AC_CONFIG_FILES([Makefile src/Makefile])
+ AC_OUTPUT
+ 

diff --git a/sci-misc/ncview/ncview-2.1.8.ebuild b/sci-misc/ncview/ncview-2.1.8.ebuild
new file mode 100644
index 000000000000..f85dbe848aa1
--- /dev/null
+++ b/sci-misc/ncview/ncview-2.1.8.ebuild
@@ -0,0 +1,43 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit autotools desktop
+
+DESCRIPTION="X-based viewer for netCDF files"
+HOMEPAGE="http://meteora.ucsd.edu/~pierce/ncview_home_page.html"
+SRC_URI="ftp://cirrus.ucsd.edu/pub/ncview/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~ppc ~x86 ~amd64-linux ~x86-linux"
+
+RDEPEND="
+	media-libs/libpng:0=
+	sci-libs/netcdf[hdf5]
+	sci-libs/udunits
+	x11-libs/libXaw
+"
+DEPEND="${RDEPEND}"
+
+PATCHES=( "${FILESDIR}"/${P}-autotools.patch )
+
+src_prepare() {
+	default
+	eautoreconf
+}
+
+src_install() {
+	default
+
+	doman data/ncview.1
+
+	insinto /usr/share/X11/app-defaults
+	newins Ncview-appdefaults Ncview
+
+	insinto /usr/share/ncview
+	doins *.ncmap
+
+	make_desktop_entry ncview
+}