* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-11-06 3:17 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2022-11-06 3:17 UTC (permalink / raw
To: gentoo-commits
commit: 97a9edf5d452ed49fae828f0ebfd1accf8469c0e
Author: Mike Gilbert <floppym <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 6 03:16:02 2022 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Sun Nov 6 03:16:53 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=97a9edf5
sys-libs/ncurses: restore keywords for libcurses-less version
This has been unkeyworded for months with only a few minor packages
affected.
Bug: https://bugs.gentoo.org/837812
Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
index 223798f81039..6f5ac7abdbc6 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
@@ -133,7 +133,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-11-17 5:47 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-11-17 5:47 UTC (permalink / raw
To: gentoo-commits
commit: c583943b4179145234819bca8fc083d049a2bb91
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 17 05:43:26 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Nov 17 05:43:26 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c583943b
sys-libs/ncurses: add link to upstream bug for C23 issue
It hadn't yet shown up in the archive when I committed 6.5_p20241109.
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.5_p20241109.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.5_p20241109.ebuild b/sys-libs/ncurses/ncurses-6.5_p20241109.ebuild
index 2be6b903589e..df1dda200557 100644
--- a/sys-libs/ncurses/ncurses-6.5_p20241109.ebuild
+++ b/sys-libs/ncurses/ncurses-6.5_p20241109.ebuild
@@ -168,7 +168,7 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
- # NCURSES_BOOL confusion, see
+ # NCURSES_BOOL confusion, see https://lists.gnu.org/archive/html/bug-ncurses/2024-11/msg00010.html
append-cflags -std=gnu17
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-11-03 21:51 Andreas K. Hüttel
0 siblings, 0 replies; 213+ messages in thread
From: Andreas K. Hüttel @ 2024-11-03 21:51 UTC (permalink / raw
To: gentoo-commits
commit: d4ab80153ce19c68f801378f027b810cdc3ee821
Author: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 3 21:43:07 2024 +0000
Commit: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Sun Nov 3 21:43:07 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d4ab8015
sys-libs/ncurses: drop 6.4_p20230401
Bug: https://bugs.gentoo.org/908676
Signed-off-by: Andreas K. Hüttel <dilfridge <AT> gentoo.org>
sys-libs/ncurses/Manifest | 1 -
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 420 --------------------------
2 files changed, 421 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index c46cde276c6e..46bc58b003ad 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -138,7 +138,6 @@ DIST ncurses-6.4-20240414.patch.gz 3007 BLAKE2B a4db0635df3b2669ae1ba0057c21f717
DIST ncurses-6.4-20240414.patch.gz.asc 729 BLAKE2B 8d579b2724245756947200a3e704c1ae534ba64e6986ad009a5ca9d33145fff82ddae9003a7c6ffe5b64b68f813661440afcac0a1321e5b80113d3ec94e1ea5a SHA512 0976a253d11fb10d52fee1cd2ad38e80b0b531f89efe94a62b9a0e2d69206bd1574140785776c7f6bd19775f6ca446c582da31cd9f51a8b0f12039d1e9695600
DIST ncurses-6.4.tar.gz 3612591 BLAKE2B 47fd9c2d27f44fa9942552881a471e5067465dbace40bf68b28998dded0556127a1d8662b96de4de4fd76c1c8b98bdae796036553ab4b05ca9f160839d841ba3 SHA512 1c2efff87a82a57e57b0c60023c87bae93f6718114c8f9dc010d4c21119a2f7576d0225dab5f0a227c2cfc6fb6bdbd62728e407f35fce5bf351bb50cf9e0fd34
DIST ncurses-6.4.tar.gz.sig 438 BLAKE2B e6a78b8d0cbce1577205b49b0260394094632cefd95294813c7e4e51a2908e8599a9f24b3b648e42ba16c015fb9424b2a82236f58aac3bf96f5400a50482e44e SHA512 f2a7859725b4d5d62f68006338d56598ac6b38a1448983108906e192f0ec922be287cc89bcc79c1ae49ebc80c967af3dd077427f35ae579b00d445c882414fed
-DIST ncurses-6.4_p20230408-patches.tar.xz 80472 BLAKE2B 0ba8156ebd4f1691fec7bc1b800ef39ce6a4210573c027dd437919cdcd7c995830116da06c69f31c65923845a4d5c88e974673fac38acce5813f7d6cdc646e3e SHA512 32960e2cc4cd9dc60c38b49f46c5ce2c02179479abb66ca29f63cd06475ae8e26299a78b5f06762d114aefbbca3ba6fbebe7093a58106eeaa40cf500d21633a4
DIST ncurses-6.4_p20240413-patches.tar.xz 63760 BLAKE2B 6a91d453cca3705ca54b3a6f2ef00250d655168c1697726db4b581a1597cbc143479b8794e176d5e4154c794f99ea33c3fe1eb26605789930fc82649a2da3c93 SHA512 59239503a9400e054641428528799aa9c13b12669b31f32b2ff18cb60882698801e04dcdf75ece8357c7a4c3b899a729aa973090ec12a20de72cb80a916878b8
DIST ncurses-6.5-20240504.patch.gz 16541 BLAKE2B 1b698b61fb738252eb8839f659b8670c743808058da9eaf39e6d288f5c00b3d1fbc4318daee8744fef37cdc42fa176fc41bbc5d4890295ad53a633207cd129a2 SHA512 6d72b5950dd55a2eb36f4c615c851a0879dcee5f97f9aa46eef68fc0f3c6996c7bf06d4646a05c455888a563ca673be3159e89db2266e81f0e72434cf4d3df29
DIST ncurses-6.5-20240504.patch.gz.asc 729 BLAKE2B 6a9ff6b524bb8ade98d6259514b7d467aee38d12b915c7eb030f025f244a44cc0c2dac524bd2645c5f315f54ef47fe6791dffc1728320e0e4790032a838cbbcd SHA512 4f8a2c6be0471df7c25fc67f596753df48a2a4660c848263d10126bba96010c185d31208b2424c495f29bbed6c93cc9cc88b37b4cc252e00bb971364fe68d2d8
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
deleted file mode 100644
index f94b6e84bc25..000000000000
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ /dev/null
@@ -1,420 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.4_p20230408
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20230107
- 20230114
- 20230121
- 20230128
- 20230211
- 20230218
- 20230225
- 20230311
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( patch.sh )
- else
- # We use a mirror as well because we've had reports of 403 forbidden for some users.
- upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
- upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
-
- # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
- mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
- # Suffix each with .patch.gz
- mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
- mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
- # Repeat for .patch.gz.asc for verify-sig
- SRC_URI+=" ${mangled_patches[@]}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
-
- # For all of the URLs, chuck in invisible-island.net too:
- SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
-
- UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
-
- unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
- fi
-fi
-
-SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="
- ${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
-"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs --without-ada
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- --disable-term-driver
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-06-22 12:28 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-06-22 12:28 UTC (permalink / raw
To: gentoo-commits
commit: 5a0823e1f2f871ea038c1a8ffe87c6ac3c4682e5
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Jun 22 12:28:22 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Jun 22 12:28:31 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5a0823e1
sys-libs/ncurses: unkeyword 6.5_p20240615
Fixes: 4147c5e0ae06dfedcf18c809c6728d5539182b57
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.5_p20240615.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.5_p20240615.ebuild b/sys-libs/ncurses/ncurses-6.5_p20240615.ebuild
index 6ed9506fbc9e..a139dca25280 100644
--- a/sys-libs/ncurses/ncurses-6.5_p20240615.ebuild
+++ b/sys-libs/ncurses/ncurses-6.5_p20240615.ebuild
@@ -91,7 +91,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-06-22 12:28 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-06-22 12:28 UTC (permalink / raw
To: gentoo-commits
commit: 0fe1226ca4c3f6b8a13c80e240479fb3e1e730a0
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Jun 22 12:27:24 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Jun 22 12:28:31 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0fe1226c
sys-libs/ncurses: add 6.5_p20240615 (unkeyworded)
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 17 +
sys-libs/ncurses/ncurses-6.5_p20240615.ebuild | 431 ++++++++++++++++++++++++++
2 files changed, 448 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 552a8758f4df..c46cde276c6e 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -140,5 +140,22 @@ DIST ncurses-6.4.tar.gz 3612591 BLAKE2B 47fd9c2d27f44fa9942552881a471e5067465dba
DIST ncurses-6.4.tar.gz.sig 438 BLAKE2B e6a78b8d0cbce1577205b49b0260394094632cefd95294813c7e4e51a2908e8599a9f24b3b648e42ba16c015fb9424b2a82236f58aac3bf96f5400a50482e44e SHA512 f2a7859725b4d5d62f68006338d56598ac6b38a1448983108906e192f0ec922be287cc89bcc79c1ae49ebc80c967af3dd077427f35ae579b00d445c882414fed
DIST ncurses-6.4_p20230408-patches.tar.xz 80472 BLAKE2B 0ba8156ebd4f1691fec7bc1b800ef39ce6a4210573c027dd437919cdcd7c995830116da06c69f31c65923845a4d5c88e974673fac38acce5813f7d6cdc646e3e SHA512 32960e2cc4cd9dc60c38b49f46c5ce2c02179479abb66ca29f63cd06475ae8e26299a78b5f06762d114aefbbca3ba6fbebe7093a58106eeaa40cf500d21633a4
DIST ncurses-6.4_p20240413-patches.tar.xz 63760 BLAKE2B 6a91d453cca3705ca54b3a6f2ef00250d655168c1697726db4b581a1597cbc143479b8794e176d5e4154c794f99ea33c3fe1eb26605789930fc82649a2da3c93 SHA512 59239503a9400e054641428528799aa9c13b12669b31f32b2ff18cb60882698801e04dcdf75ece8357c7a4c3b899a729aa973090ec12a20de72cb80a916878b8
+DIST ncurses-6.5-20240504.patch.gz 16541 BLAKE2B 1b698b61fb738252eb8839f659b8670c743808058da9eaf39e6d288f5c00b3d1fbc4318daee8744fef37cdc42fa176fc41bbc5d4890295ad53a633207cd129a2 SHA512 6d72b5950dd55a2eb36f4c615c851a0879dcee5f97f9aa46eef68fc0f3c6996c7bf06d4646a05c455888a563ca673be3159e89db2266e81f0e72434cf4d3df29
+DIST ncurses-6.5-20240504.patch.gz.asc 729 BLAKE2B 6a9ff6b524bb8ade98d6259514b7d467aee38d12b915c7eb030f025f244a44cc0c2dac524bd2645c5f315f54ef47fe6791dffc1728320e0e4790032a838cbbcd SHA512 4f8a2c6be0471df7c25fc67f596753df48a2a4660c848263d10126bba96010c185d31208b2424c495f29bbed6c93cc9cc88b37b4cc252e00bb971364fe68d2d8
+DIST ncurses-6.5-20240511.patch.gz 85486 BLAKE2B 94a00b7013531509def2e17ec75421897f321763fba970a73813278826071e99dd9ddde815c3b4a6cad7c6a3f16eada3afb030f31ee72123dcf0de710c9bcc03 SHA512 c529f1bac7af6c774447027449ac59e41dee3fc30004f7c82113936cc3aed9b5536466d2ca91d99d13d1e1e0e9d7357b87ceb9cc6dc54b212c730d088835288c
+DIST ncurses-6.5-20240511.patch.gz.asc 729 BLAKE2B 8b38ff421f7b9cb9115f40cad4e9002083103b4509a346ddf4af39e8a34a8b6fff38546eed0a41c439d2fb80b691adb171216c527cdda352322639ca357c951d SHA512 dbbecf02d46fa97918437a2e9e4e563062c7a8b0d0dd556c22d07d4b186e3c6d13f8f40e1e25a575ba0f4740751db007ad936db275685e253eb3c3fa9cecb6ce
+DIST ncurses-6.5-20240518.patch.gz 182827 BLAKE2B 25bfb9822f24dad7ee01314d592c923dd1ac0f21ec6c3bd9c8cc0d858b776cf0441fab4cc3dabb04bd03eee6855062e51a3ac29bccc7116fbdc28a4f9aed4dd5 SHA512 1948cdfc5eb7c1be224a148714e8a482ca6545bbce6230f493fa7e722d3fc776c9b56563b59b60008058e54916ff298443f2e482012f47fa1037f4983b8cd333
+DIST ncurses-6.5-20240518.patch.gz.asc 729 BLAKE2B 25162fbcabe332acc337dfc84b8dccf89c255dfd76ecf150ed658257ab770498ae2ffd9e6a66fe591848456a9a910905ef66daec827b3af05b4dc8620e92ea40 SHA512 e10486194cad17dda2f96399eadc8addfa8d41e09372610df902ff5fb305282432906a6a8c1d4499d860b9eafa56cd26fa64f15c539e3ef6064ea1f450029b3f
+DIST ncurses-6.5-20240519.patch.gz 11069 BLAKE2B 8cead0924705fb6e3a0f154f336a26922e4f0e50f1a47e8df0f4f4c8d6ecc76f8b4b9d6dc818f34d72063f7e5e2ef1c3068f4e2c11d317a27d6d129904ff6f2f SHA512 b2b92a6ec97c598ec0ffbcddfca4e68322836744a225e458b7cd92690a931d1c1fbade2d1a3753a799593c72940c557f6495dd979bad5d78d0cbd03f860f9bd4
+DIST ncurses-6.5-20240519.patch.gz.asc 729 BLAKE2B 75e61ea2c8a86a2849bca0650fe8b466abafe35a8c12b90e0039e11fc649ca95daa75f85a2c27979172cd45cef1bc20967bffa24191314f23056ab3fbbce4f75 SHA512 8543b2a8e56905e106f76dce1e3b50172051d0cbccd21b630305330d572f6cf99eaf23535fad225643c053244a47374971d762a39d393c5205e360399c61d334
+DIST ncurses-6.5-20240525.patch.gz 119175 BLAKE2B 61a3fa6854238886ab107f62a2266a27d6b8c4aa47868f2a4b36acc1cfa439ffb2649da451f4df744a27eb0d823ec531441216011778485a5d9a3402c8483bf3 SHA512 2a3254943e9e1351004d32cdcb83c135084b4116c70d36cf07f5f072a37a329d5dbb4044f7237c1c47a7959e3b7497372ec93e283d1a79f7ead0be86a71c44bd
+DIST ncurses-6.5-20240525.patch.gz.asc 729 BLAKE2B 41c0516cde5a3e289686dd6e0c34a2dee6ddd1fd554cafdaea964d312c366a66a259e5f8357fccbab16243a89dd3468705d56d7da1b95eb43a02633f2ec76bf1 SHA512 cc25f91547c02202a4b030a94e142a05e28854fb1330d25b13f8e20e351a3b8562399fce0b6f185f71c616f88059151af003c817642cb3353b177c815a18081a
+DIST ncurses-6.5-20240601.patch.gz 62426 BLAKE2B 1794aa064fd32974aa90bd2f71a52db6ccf117a032fb3e234f6390e1e98c932f3d3894e3019ba54a65990b36c9864cc7ad631566760f22b5ebc071d61bc31919 SHA512 2a4e4c91e27b72ee4c578daaac1dc160426b53c6e1947a6782fda39bc320081baad6f91f8bb54e443920fba17852614fbf7621d601e94d0f4c96a78f449fb361
+DIST ncurses-6.5-20240601.patch.gz.asc 729 BLAKE2B 5b2ffb8ce5c17902271d8dc4f4d92c0eb2f59bbb9a7e494113cae157ed7e90721e755424c4e0956441e552fe52256c45e6e77ff0dbb3c09974c439d1fb0725bc SHA512 a037bc544f6a57468b667e91fbc72ac078c312fef165807e2af5c6add0ade29552a68df723ceb1b019238873368e7d63c2d9f45948ea0453ce97c1fcd4b55272
+DIST ncurses-6.5-20240608.patch.gz 51416 BLAKE2B 8bb8141fe13e770837d1f2fee3902e402743c2a06cb08f9981635937dea238c090c474446bba1e227de867be07d7be00c70061c4d3254b9a8b779115382cb4ad SHA512 d7db7404bd16bbeb5340ad964062634f5a7f66180ee8c6fdee356b5386a8c87d5f5e0c76159923d220ff024d6a43c55220f8ea837a06f4ac5d76d2bcf42c9e0f
+DIST ncurses-6.5-20240608.patch.gz.asc 729 BLAKE2B 2788a5172f7ee437be0aa61fadf04a62c459777e33f150500c32bc29c80c0dee83cb267f3e8174a316363a196bd415401c5e8f56049487855eff814f8047e88c SHA512 ab2162f9cb7e587ff2d049dd1c50b36cfb4cc4914b9c53067dbbca8cbbb63dfe47a690385ae72c2feb5a73dee965e844b4d76ce31463ee0e0f052e4706d4f4ed
+DIST ncurses-6.5-20240615.patch.gz 10195 BLAKE2B 0bfb266ebeb1c92b48ce2c2d2e193671dccb26e90d4bb61a4394360b8b3029087eb65be05e3ab20c665da82a8619354fa5c2b99ce6e3bab6e27b4029e8e5919a SHA512 d72e9334b58ff800ee189a20713c7be65a78aad05aae16f537355e5e48495f1658291552569454c744b9c5d9af3199d892ecf8d41a9917bd83b81238c87c5564
+DIST ncurses-6.5-20240615.patch.gz.asc 729 BLAKE2B 1e7179beb1908ae8c9733c0f55e5e027d2e6bab5265603f3d61063bd5a746a395c75e6f134bc2314277735e881a828790901e735e17bdef54b7cbd54e4d2d72d SHA512 ecc1adb886abb8364c93c0155412198e4e64955643de38ebbc3bff77c6675d537b135a138f68b6c216f6b50df8ccca0b63b83f32cad7c20a5d552305f103c0f8
DIST ncurses-6.5.tar.gz 3688489 BLAKE2B d0a05c218b5f320ba9abe2f322787baef1d15d764e503c81d49772b54b2927d28ecbeb500c8e514996226b41f69445b4de44ff423cec25b61847307fe61682ec SHA512 fc5a13409d2a530a1325776dcce3a99127ddc2c03999cfeb0065d0eee2d68456274fb1c7b3cc99c1937bc657d0e7fca97016e147f93c7821b5a4a6837db821e8
DIST ncurses-6.5.tar.gz.sig 438 BLAKE2B 5789b47932ec97d3863c7a65306369f0a36cb5b1a35c1e009b5174f50941edceafc22e6f07db3843a096773663a0ca602c0ecb9465e6042d9a78d76ae5008215 SHA512 96ce61a3d529e48e249acecbf4bb9eae2d9f2f67506e92ffa3182f5e98040c38babf0c2c15d92fc5d96e1181e72be1b29fdbff7bee859dfe2ae387f9b8883092
+DIST ncurses-6.5_p20240615-patches.tar.xz 63232 BLAKE2B c7fdc496bb3b055b6766ea8a8b5edaba08cecbe9dfe1b3035e55067bce958eb2bf235f226058e30712f14bf6401112901c3add42093216e3b6b42b4ffd438f67 SHA512 a4d9d09c6110a2971bed0facab87c7e255b4c3e34bfa3b8faddd86af9c95fea89833cd14286fd690db138ca60c0fcff818f11d30a6aa820136899619a4e7f95a
diff --git a/sys-libs/ncurses/ncurses-6.5_p20240615.ebuild b/sys-libs/ncurses/ncurses-6.5_p20240615.ebuild
new file mode 100644
index 000000000000..6ed9506fbc9e
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.5_p20240615.ebuild
@@ -0,0 +1,431 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
+# provide a configure option for the ABI version.
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.5_p20240615
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20240504
+ 20240511
+ 20240518
+ 20240519
+ 20240525
+ 20240601
+ 20240608
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( patch.sh )
+ else
+ # We use a mirror as well because we've had reports of 403 forbidden for some users.
+ upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+ upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+
+ # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
+ mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
+ # Suffix each with .patch.gz
+ mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
+ mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
+ # Repeat for .patch.gz.asc for verify-sig
+ SRC_URI+=" ${mangled_patches[@]}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
+
+ # For all of the URLs, chuck in invisible-island.net too:
+ SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
+
+ UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
+
+ unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
+ fi
+fi
+
+SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+S="${WORKDIR}/${MY_P}"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+# TODO: ncurses allows (and we take advantage of this, even) passing
+# the SONAME for dlopen() use, so only the header is needed at build time.
+# Maybe we should bundle a copy of gpm.h so we can move gpm to PDEPEND
+# which would be far nicer UX-wise.
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="
+ ${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
+"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_prepare with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CXX,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CXX=${BUILD_CXX} \
+ CPP=${BUILD_CPP} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs --without-ada
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --enable-fvisibility
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+
+ # bug #930806
+ --disable-setuid-environ
+ # TODO: Maybe do these for USE=hardened
+ #--disable-root-access
+ #--disable-root-environ
+
+ --disable-term-driver
+ --disable-termcap
+ --enable-symlinks
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-05-11 15:19 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-05-11 15:19 UTC (permalink / raw
To: gentoo-commits
commit: 45cc433110adf6ac959c96a07a4c4c449a026172
Author: Rolf Eike Beer <eike <AT> sf-mail <DOT> de>
AuthorDate: Sat May 11 12:38:39 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat May 11 15:17:52 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=45cc4331
sys-libs/ncurses: stable 6.4_p20240414 for hppa, bug #930803
Signed-off-by: Rolf Eike Beer <eike <AT> sf-mail.de>
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
index 06032ce23c15..b3cf5fcd0bf4 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -152,7 +152,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-05-07 18:54 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-05-07 18:54 UTC (permalink / raw
To: gentoo-commits
commit: 27152d9cdbb8bff262af507c2927e3ad90b9b011
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Tue May 7 18:54:09 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Tue May 7 18:54:09 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=27152d9c
sys-libs/ncurses: drop 6.4_p20230527, 6.4_p20240330
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 2 -
sys-libs/ncurses/ncurses-6.4_p20230527.ebuild | 431 -----------------------
sys-libs/ncurses/ncurses-6.4_p20240330.ebuild | 478 --------------------------
3 files changed, 911 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 87d72117cb10..552a8758f4df 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -139,8 +139,6 @@ DIST ncurses-6.4-20240414.patch.gz.asc 729 BLAKE2B 8d579b2724245756947200a3e704c
DIST ncurses-6.4.tar.gz 3612591 BLAKE2B 47fd9c2d27f44fa9942552881a471e5067465dbace40bf68b28998dded0556127a1d8662b96de4de4fd76c1c8b98bdae796036553ab4b05ca9f160839d841ba3 SHA512 1c2efff87a82a57e57b0c60023c87bae93f6718114c8f9dc010d4c21119a2f7576d0225dab5f0a227c2cfc6fb6bdbd62728e407f35fce5bf351bb50cf9e0fd34
DIST ncurses-6.4.tar.gz.sig 438 BLAKE2B e6a78b8d0cbce1577205b49b0260394094632cefd95294813c7e4e51a2908e8599a9f24b3b648e42ba16c015fb9424b2a82236f58aac3bf96f5400a50482e44e SHA512 f2a7859725b4d5d62f68006338d56598ac6b38a1448983108906e192f0ec922be287cc89bcc79c1ae49ebc80c967af3dd077427f35ae579b00d445c882414fed
DIST ncurses-6.4_p20230408-patches.tar.xz 80472 BLAKE2B 0ba8156ebd4f1691fec7bc1b800ef39ce6a4210573c027dd437919cdcd7c995830116da06c69f31c65923845a4d5c88e974673fac38acce5813f7d6cdc646e3e SHA512 32960e2cc4cd9dc60c38b49f46c5ce2c02179479abb66ca29f63cd06475ae8e26299a78b5f06762d114aefbbca3ba6fbebe7093a58106eeaa40cf500d21633a4
-DIST ncurses-6.4_p20230527-patches.tar.xz 63080 BLAKE2B 9db4ac28c8936d3a9c6f3ca5cb8a4c92aa79ee4ce49789bcfc9c031a0454bf6f55a0544bc4a3dbb5c243ed9b2d0792afb98622a6a14b11675b7988100a650eb5 SHA512 3eacda173e8a177cd201ca3fef65311ac92e7e5af4039dc8a5792beae7db1d37efd06f5a55c249eebb771d1245995ff3a206a45794936b6b4299151666dbeade
-DIST ncurses-6.4_p20240330-patches.tar.xz 63796 BLAKE2B 3e6618ba0b37268d10a16cf26c2810e55c17ded97079af3753e34f2d12575f979a2e55cfd308abf783e35e39d4a848b89f435b4886d3633007ccb522b8dc2e51 SHA512 1bbf1978f9287f68bf6a8596f06d4d0523564bf3d2f6b3bd9746081a2fa0c76e36862beca62a4157d51cac0df61e456ddb6cacfae10b92344fe80cd752f72c38
DIST ncurses-6.4_p20240413-patches.tar.xz 63760 BLAKE2B 6a91d453cca3705ca54b3a6f2ef00250d655168c1697726db4b581a1597cbc143479b8794e176d5e4154c794f99ea33c3fe1eb26605789930fc82649a2da3c93 SHA512 59239503a9400e054641428528799aa9c13b12669b31f32b2ff18cb60882698801e04dcdf75ece8357c7a4c3b899a729aa973090ec12a20de72cb80a916878b8
DIST ncurses-6.5.tar.gz 3688489 BLAKE2B d0a05c218b5f320ba9abe2f322787baef1d15d764e503c81d49772b54b2927d28ecbeb500c8e514996226b41f69445b4de44ff423cec25b61847307fe61682ec SHA512 fc5a13409d2a530a1325776dcce3a99127ddc2c03999cfeb0065d0eee2d68456274fb1c7b3cc99c1937bc657d0e7fca97016e147f93c7821b5a4a6837db821e8
DIST ncurses-6.5.tar.gz.sig 438 BLAKE2B 5789b47932ec97d3863c7a65306369f0a36cb5b1a35c1e009b5174f50941edceafc22e6f07db3843a096773663a0ca602c0ecb9465e6042d9a78d76ae5008215 SHA512 96ce61a3d529e48e249acecbf4bb9eae2d9f2f67506e92ffa3182f5e98040c38babf0c2c15d92fc5d96e1181e72be1b29fdbff7bee859dfe2ae387f9b8883092
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild
deleted file mode 100644
index 007bbc486ccd..000000000000
--- a/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild
+++ /dev/null
@@ -1,431 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
-# provide a configure option for the ABI version.
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.4_p20230527
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20230107
- 20230114
- 20230121
- 20230128
- 20230211
- 20230218
- 20230225
- 20230311
- 20230401
- 20230408
- 20230415
- 20230418
- 20230423
- 20230424
- 20230429
- 20230506
- 20230514
- 20230520
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( patch.sh )
- else
- # We use a mirror as well because we've had reports of 403 forbidden for some users.
- upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
- upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
-
- # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
- mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
- # Suffix each with .patch.gz
- mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
- mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
- # Repeat for .patch.gz.asc for verify-sig
- SRC_URI+=" ${mangled_patches[@]}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
-
- # For all of the URLs, chuck in invisible-island.net too:
- SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
-
- UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
-
- unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
- fi
-fi
-
-SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="
- ${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
-"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs --without-ada
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-term-driver
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
deleted file mode 100644
index e2ad9e3b5d83..000000000000
--- a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
+++ /dev/null
@@ -1,478 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
-# provide a configure option for the ABI version.
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.4_p20240330
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20230107
- 20230114
- 20230121
- 20230128
- 20230211
- 20230218
- 20230225
- 20230311
- 20230401
- 20230408
- 20230415
- 20230418
- 20230423
- 20230424
- 20230429
- 20230506
- 20230514
- 20230520
- 20230527
- 20230603
- 20230610
- 20230615
- 20230617
- 20230624
- 20230625
- 20230701
- 20230708
- 20230715
- 20230722
- 20230729
- 20230805
- 20230812
- 20230819
- 20230826
- 20230902
- 20230909
- 20230917
- 20230918
- 20230923
- 20231001
- 20231007
- 20231014
- 20231016
- 20231021
- 20231028
- 20231104
- 20231111
- 20231118
- 20231121
- 20231125
- 20231202
- 20231209
- 20231217
- 20231223
- 20231230
- 20240106
- 20240113
- 20240120
- 20240127
- 20240203
- 20240210
- 20240217
- 20240224
- 20240302
- 20240309
- 20240323
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( patch.sh )
- else
- # We use a mirror as well because we've had reports of 403 forbidden for some users.
- upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
- upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
-
- # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
- mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
- # Suffix each with .patch.gz
- mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
- mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
- # Repeat for .patch.gz.asc for verify-sig
- SRC_URI+=" ${mangled_patches[@]}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
-
- # For all of the URLs, chuck in invisible-island.net too:
- SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
-
- UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
-
- unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
- fi
-fi
-
-SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-S="${WORKDIR}/${MY_P}"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="
- ${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
-"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs --without-ada
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-term-driver
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:32 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:32 UTC (permalink / raw
To: gentoo-commits
commit: 7bae2d268c6c13d34add519bfa0b835678c96af9
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:32:03 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:32:03 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7bae2d26
sys-libs/ncurses: Stabilize 6.4_p20240414 amd64, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
index 3d26b093679b..b872f29855b7 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -152,7 +152,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:32 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:32 UTC (permalink / raw
To: gentoo-commits
commit: 7be7af6fea5fd3b134404bb10b84b998fe2106be
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:32:23 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:32:23 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7be7af6f
sys-libs/ncurses: Stabilize 6.4_p20240414 x86, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
index 4087942fb2a8..06032ce23c15 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -152,7 +152,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:32 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:32 UTC (permalink / raw
To: gentoo-commits
commit: 43d5fbfb7c545b57875dec17299d2d5ab5675eb0
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:32:20 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:32:20 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=43d5fbfb
sys-libs/ncurses: Stabilize 6.4_p20240414 sparc, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
index 2b4a094ce9d1..4087942fb2a8 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -152,7 +152,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:32 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:32 UTC (permalink / raw
To: gentoo-commits
commit: 5887c0cb72d6d3a22c7cea9b188e20a941b07cb8
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:32:13 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:32:13 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5887c0cb
sys-libs/ncurses: Stabilize 6.4_p20240414 ppc, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
index 5e1e521a6868..9e0990c56fd2 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -152,7 +152,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:32 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:32 UTC (permalink / raw
To: gentoo-commits
commit: 4f3d138c157622396e3ea0087a80fc792cc78909
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:32:16 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:32:16 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4f3d138c
sys-libs/ncurses: Stabilize 6.4_p20240414 ppc64, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
index 9e0990c56fd2..2b4a094ce9d1 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -152,7 +152,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:32 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:32 UTC (permalink / raw
To: gentoo-commits
commit: c747ee8543042a49b435392343906dce8175ebfc
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:32:07 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:32:07 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c747ee85
sys-libs/ncurses: Stabilize 6.4_p20240414 arm, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
index b872f29855b7..e95437d8a7b7 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -152,7 +152,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:32 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:32 UTC (permalink / raw
To: gentoo-commits
commit: e48cd800ee6c86906e16efb75bbac0a256e1a702
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:32:10 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:32:10 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e48cd800
sys-libs/ncurses: Stabilize 6.4_p20240414 arm64, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
index e95437d8a7b7..5e1e521a6868 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -152,7 +152,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:03 UTC (permalink / raw
To: gentoo-commits
commit: 211b4e605e231df83913dc6549b85a3c06bc22bc
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:03:17 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:03:17 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=211b4e60
sys-libs/ncurses: Stabilize 6.4_p20240330 ppc64, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240330.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
index 8c91f8b0d7ed..cd14da42f88f 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
@@ -150,7 +150,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:03 UTC (permalink / raw
To: gentoo-commits
commit: d7aa5abce5b73ef18ce09234b6545f0d1e10a82a
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:03:18 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:03:18 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d7aa5abc
sys-libs/ncurses: Stabilize 6.4_p20240330 x86, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240330.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
index cd14da42f88f..80a563183365 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
@@ -150,7 +150,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:03 UTC (permalink / raw
To: gentoo-commits
commit: 4b074586b44dd562bd9f47bfacb5fa93c659a0fc
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:03:19 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:03:19 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4b074586
sys-libs/ncurses: Stabilize 6.4_p20240330 arm, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240330.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
index 80a563183365..b0667b01228b 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
@@ -150,7 +150,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:03 UTC (permalink / raw
To: gentoo-commits
commit: bac66f1144a4dcbcaa6584a130a608b2b3d2970e
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:03:16 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:03:16 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=bac66f11
sys-libs/ncurses: Stabilize 6.4_p20240330 sparc, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240330.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
index 4d522147d461..8c91f8b0d7ed 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
@@ -150,7 +150,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:03 UTC (permalink / raw
To: gentoo-commits
commit: 10332d561309c7e07d012266e6dc79896f2cb5d8
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:03:15 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:03:15 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=10332d56
sys-libs/ncurses: Stabilize 6.4_p20240330 ppc, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240330.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
index cf434a4c5ea1..4d522147d461 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
@@ -150,7 +150,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:03 UTC (permalink / raw
To: gentoo-commits
commit: c5a51be06913953cf10a1700c0bf5cb2336b5457
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:03:20 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:03:20 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c5a51be0
sys-libs/ncurses: Stabilize 6.4_p20240330 arm64, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240330.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
index b0667b01228b..e2ad9e3b5d83 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
@@ -150,7 +150,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:03 UTC (permalink / raw
To: gentoo-commits
commit: 1bd91131fd08ac32e25e1838af88f1620cb46166
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 04:03:13 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:03:13 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1bd91131
sys-libs/ncurses: Stabilize 6.4_p20240330 amd64, #930803
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240330.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
index e4fb6c71f0fe..cf434a4c5ea1 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
@@ -150,7 +150,7 @@ S="${WORKDIR}/${MY_P}"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-28 4:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-28 4:03 UTC (permalink / raw
To: gentoo-commits
commit: ef4afbd75c2c6e8262d2de04930398dfbce1d1bc
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 28 03:49:27 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Apr 28 04:02:12 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ef4afbd7
sys-libs/ncurses: tweaks to 6.5
* Cleanup PATCH_DATES as new release means starting anew
* Cleanup whitespace left over from opaque settings
* Pass --enable-fvisibility
* Pass --disable-setuid-environ (bug #930806)
* Add a TODO wrt gpm/PDEPEND/circular dep
Closes: https://bugs.gentoo.org/930806
Signed-off-by: Sam James <sam <AT> gentoo.org>
.../{ncurses-6.5.ebuild => ncurses-6.5-r1.ebuild} | 85 ++++------------------
1 file changed, 14 insertions(+), 71 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.5.ebuild b/sys-libs/ncurses/ncurses-6.5-r1.ebuild
similarity index 94%
rename from sys-libs/ncurses/ncurses-6.5.ebuild
rename to sys-libs/ncurses/ncurses-6.5-r1.ebuild
index 3354bee12fbd..f4d21fed91c1 100644
--- a/sys-libs/ncurses/ncurses-6.5.ebuild
+++ b/sys-libs/ncurses/ncurses-6.5-r1.ebuild
@@ -43,74 +43,7 @@ if [[ ${PV} == *_p* ]] ; then
# This array should contain a list of all the snapshots since the last
# release if there's no megapatch available yet.
PATCH_DATES=(
- 20230107
- 20230114
- 20230121
- 20230128
- 20230211
- 20230218
- 20230225
- 20230311
- 20230401
- 20230408
- 20230415
- 20230418
- 20230423
- 20230424
- 20230429
- 20230506
- 20230514
- 20230520
- 20230527
- 20230603
- 20230610
- 20230615
- 20230617
- 20230624
- 20230625
- 20230701
- 20230708
- 20230715
- 20230722
- 20230729
- 20230805
- 20230812
- 20230819
- 20230826
- 20230902
- 20230909
- 20230917
- 20230918
- 20230923
- 20231001
- 20231007
- 20231014
- 20231016
- 20231021
- 20231028
- 20231104
- 20231111
- 20231118
- 20231121
- 20231125
- 20231202
- 20231209
- 20231217
- 20231223
- 20231230
- 20240106
- 20240113
- 20240120
- 20240127
- 20240203
- 20240210
- 20240217
- 20240224
- 20240302
- 20240309
- 20240323
- 20240330
- 20240413
+ #20240101
# Latest patch is just _pN = $(ver_cut 4)
$(ver_cut 4)
@@ -156,6 +89,10 @@ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
+# TODO: ncurses allows (and we take advantage of this, even) passing
+# the SONAME for dlopen() use, so only the header is needed at build time.
+# Maybe we should bundle a copy of gpm.h so we can move gpm to PDEPEND
+# which would be far nicer UX-wise.
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
# Block the older ncurses that installed all files w/SLOT=5, bug #557472
RDEPEND="
@@ -284,6 +221,7 @@ do_configure() {
# Now the rest of the various standard flags.
--with-shared
+ --enable-fvisibility
# (Originally disabled until bug #245417 is sorted out, but now
# just keeping it off for good, given nobody needed it until now
# (2022) and we're trying to phase out bdb.)
@@ -297,6 +235,13 @@ do_configure() {
# The configure script uses ldd to parse the linked output which
# is flaky for cross-compiling/multilib/ldd versions/etc...
$(use_with gpm gpm libgpm.so.1)
+
+ # bug #930806
+ --disable-setuid-environ
+ # TODO: Maybe do these for USE=hardened
+ #--disable-root-access
+ #--disable-root-environ
+
--disable-term-driver
--disable-termcap
--enable-symlinks
@@ -326,9 +271,7 @@ do_configure() {
if [[ ${target} == ncursest* ]] ; then
conf+=( --with-{pthread,reentrant} )
else
- conf+=(
- --without-{pthread,reentrant}
- )
+ conf+=( --without-{pthread,reentrant} )
fi
# Make sure each variant goes in a unique location.
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-15 2:09 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-15 2:09 UTC (permalink / raw
To: gentoo-commits
commit: 7e63eaefbe738901aa916c1a60e8c6b7b0a40d08
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Apr 15 02:04:56 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Apr 15 02:05:17 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7e63eaef
sys-libs/ncurses: add brief pointer comment wrt opaque
Followup to d7b3889a66553ad455ee778230d11b0d30d8810e.
Bug: https://bugs.gentoo.org/928873
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 1 +
1 file changed, 1 insertion(+)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
index 285b2e6a244c..3d26b093679b 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -329,6 +329,7 @@ do_configure() {
conf+=(
--without-{pthread,reentrant}
+ # XXX: Revisit on next ABI break (>6) (bug #928873)
--disable-opaque-curses
--disable-opaque-form
--disable-opaque-menu
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-15 2:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-15 2:03 UTC (permalink / raw
To: gentoo-commits
commit: d7b3889a66553ad455ee778230d11b0d30d8810e
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Apr 15 02:02:18 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Apr 15 02:03:40 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d7b3889a
sys-libs/ncurses: add 6.4_p20240414
Don't make window and friends opaque for now. Revisit in future with
a planned migration and tinderboxing.
Closes: https://bugs.gentoo.org/928873
Closes: https://bugs.gentoo.org/929238
Closes: https://bugs.gentoo.org/929224
Closes: https://bugs.gentoo.org/929198
Closes: https://bugs.gentoo.org/929130
Closes: https://bugs.gentoo.org/929056
Closes: https://bugs.gentoo.org/928887
Closes: https://bugs.gentoo.org/928945
Closes: https://bugs.gentoo.org/928884
Closes: https://bugs.gentoo.org/928876
Closes: https://bugs.gentoo.org/928872
Closes: https://bugs.gentoo.org/928871
Closes: https://bugs.gentoo.org/928735
Closes: https://bugs.gentoo.org/928943
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 5 +
sys-libs/ncurses/ncurses-6.4_p20240414.ebuild | 487 ++++++++++++++++++++++++++
2 files changed, 492 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 797ed94d9f93..7b5177af9182 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -132,8 +132,13 @@ DIST ncurses-6.4-20240323.patch.gz 143301 BLAKE2B f51c229985025950ebe0b35e1e9cb1
DIST ncurses-6.4-20240323.patch.gz.asc 729 BLAKE2B 380eaa8b0f3faa3e2ff21a3847c6f2ba59019adec68391134bb68bdecfd13cb56589ad4ec062dd391ae3d7bd96a306d85e78ef0827300de594723d188272e7c4 SHA512 380675d04ad1db69a039001b109bea6e7ef3f9fa0059ebe8b17ad12d0b59b20dd18b90abedb63f95db2ed6ad770de77aacc85c24d70bb883b1851c72c5dada88
DIST ncurses-6.4-20240330.patch.gz 63526 BLAKE2B 593823a358017e5f98e897ebd6e1a2f945b0329c51a76b0ea65458751d2486dc51a71c1d0fdfbc1741167c47ed0b8aedc52b1a923c4788f23293d7e7729885c7 SHA512 666c8f7a37bc2b93b9b0ff76f2a5fe412f1d5c0c9260b64a26665e7c3ba74a9f05ae3883a512425d901ab943948509792759297ea85b9642cd02b7b64455326e
DIST ncurses-6.4-20240330.patch.gz.asc 729 BLAKE2B 159c110254d81b1c83d7cdb3250fce7ac12d1b4773e6c1a4a347bc7a5d96893504b1a7066d6a8997c3db467ba7d3705e043714000142fd2ebac6e9a008a62ae8 SHA512 1a0dcc56e79da6e0d615bd0a6571869e42aa6e31233e6cb01fe85c8816c82858c23e93a47650e1a4fd8cee2461e4900f7b78a4f9aa3149a0aec6cda704f9c163
+DIST ncurses-6.4-20240413.patch.gz 113122 BLAKE2B d8e5d011a8ab61dd30624c51d7917ecc66f388c8b0edcba25f35179031a16b5a41379d8c5f2c40a2b6af5e485b25ca8a3cb1c97301450b00c14e2640187f0054 SHA512 45c14df0fc4229667ae173cd4eb37fad2a3dbcb8906763a4d472fad7b563dbe72dbc0bc12e6070e6e7f2e64fc2f3a254bffe5d1e904dce9f5636fccdd2761750
+DIST ncurses-6.4-20240413.patch.gz.asc 729 BLAKE2B 3786f815cddf3f6ebbf89da47e3151c01d50f26c2fa713cb982c61b7190ca25a807b6f7264688a296d5d252c78f4737372f2c6f26d7713bc448c5228676e922f SHA512 c172fe7f308a01474d04b06919b43710abcdb9fe3961396cbc7731f619093ed18bc7deb9bb62075e3bd0bb88d345059c9bf485a4f9ef614dc1109d4549c95a34
+DIST ncurses-6.4-20240414.patch.gz 3007 BLAKE2B a4db0635df3b2669ae1ba0057c21f717db2512aa51545ea5157dbaf33c3db334cf8315ecd60a4c8a6406e6e7ba417e23f00f575af72c56b18046e3c4a34dab87 SHA512 348ffdbeb2b7350493957562a0af1a217590dd35cd9f8f27ff46adfb969018224e170b63581f5b3ad268293441db59878898bd23d1d1a4add77fc681344df526
+DIST ncurses-6.4-20240414.patch.gz.asc 729 BLAKE2B 8d579b2724245756947200a3e704c1ae534ba64e6986ad009a5ca9d33145fff82ddae9003a7c6ffe5b64b68f813661440afcac0a1321e5b80113d3ec94e1ea5a SHA512 0976a253d11fb10d52fee1cd2ad38e80b0b531f89efe94a62b9a0e2d69206bd1574140785776c7f6bd19775f6ca446c582da31cd9f51a8b0f12039d1e9695600
DIST ncurses-6.4.tar.gz 3612591 BLAKE2B 47fd9c2d27f44fa9942552881a471e5067465dbace40bf68b28998dded0556127a1d8662b96de4de4fd76c1c8b98bdae796036553ab4b05ca9f160839d841ba3 SHA512 1c2efff87a82a57e57b0c60023c87bae93f6718114c8f9dc010d4c21119a2f7576d0225dab5f0a227c2cfc6fb6bdbd62728e407f35fce5bf351bb50cf9e0fd34
DIST ncurses-6.4.tar.gz.sig 438 BLAKE2B e6a78b8d0cbce1577205b49b0260394094632cefd95294813c7e4e51a2908e8599a9f24b3b648e42ba16c015fb9424b2a82236f58aac3bf96f5400a50482e44e SHA512 f2a7859725b4d5d62f68006338d56598ac6b38a1448983108906e192f0ec922be287cc89bcc79c1ae49ebc80c967af3dd077427f35ae579b00d445c882414fed
DIST ncurses-6.4_p20230408-patches.tar.xz 80472 BLAKE2B 0ba8156ebd4f1691fec7bc1b800ef39ce6a4210573c027dd437919cdcd7c995830116da06c69f31c65923845a4d5c88e974673fac38acce5813f7d6cdc646e3e SHA512 32960e2cc4cd9dc60c38b49f46c5ce2c02179479abb66ca29f63cd06475ae8e26299a78b5f06762d114aefbbca3ba6fbebe7093a58106eeaa40cf500d21633a4
DIST ncurses-6.4_p20230527-patches.tar.xz 63080 BLAKE2B 9db4ac28c8936d3a9c6f3ca5cb8a4c92aa79ee4ce49789bcfc9c031a0454bf6f55a0544bc4a3dbb5c243ed9b2d0792afb98622a6a14b11675b7988100a650eb5 SHA512 3eacda173e8a177cd201ca3fef65311ac92e7e5af4039dc8a5792beae7db1d37efd06f5a55c249eebb771d1245995ff3a206a45794936b6b4299151666dbeade
DIST ncurses-6.4_p20240330-patches.tar.xz 63796 BLAKE2B 3e6618ba0b37268d10a16cf26c2810e55c17ded97079af3753e34f2d12575f979a2e55cfd308abf783e35e39d4a848b89f435b4886d3633007ccb522b8dc2e51 SHA512 1bbf1978f9287f68bf6a8596f06d4d0523564bf3d2f6b3bd9746081a2fa0c76e36862beca62a4157d51cac0df61e456ddb6cacfae10b92344fe80cd752f72c38
+DIST ncurses-6.4_p20240413-patches.tar.xz 63760 BLAKE2B 6a91d453cca3705ca54b3a6f2ef00250d655168c1697726db4b581a1597cbc143479b8794e176d5e4154c794f99ea33c3fe1eb26605789930fc82649a2da3c93 SHA512 59239503a9400e054641428528799aa9c13b12669b31f32b2ff18cb60882698801e04dcdf75ece8357c7a4c3b899a729aa973090ec12a20de72cb80a916878b8
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
new file mode 100644
index 000000000000..285b2e6a244c
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.4_p20240414.ebuild
@@ -0,0 +1,487 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
+# provide a configure option for the ABI version.
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.4_p20240413
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20230107
+ 20230114
+ 20230121
+ 20230128
+ 20230211
+ 20230218
+ 20230225
+ 20230311
+ 20230401
+ 20230408
+ 20230415
+ 20230418
+ 20230423
+ 20230424
+ 20230429
+ 20230506
+ 20230514
+ 20230520
+ 20230527
+ 20230603
+ 20230610
+ 20230615
+ 20230617
+ 20230624
+ 20230625
+ 20230701
+ 20230708
+ 20230715
+ 20230722
+ 20230729
+ 20230805
+ 20230812
+ 20230819
+ 20230826
+ 20230902
+ 20230909
+ 20230917
+ 20230918
+ 20230923
+ 20231001
+ 20231007
+ 20231014
+ 20231016
+ 20231021
+ 20231028
+ 20231104
+ 20231111
+ 20231118
+ 20231121
+ 20231125
+ 20231202
+ 20231209
+ 20231217
+ 20231223
+ 20231230
+ 20240106
+ 20240113
+ 20240120
+ 20240127
+ 20240203
+ 20240210
+ 20240217
+ 20240224
+ 20240302
+ 20240309
+ 20240323
+ 20240330
+ 20240413
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( patch.sh )
+ else
+ # We use a mirror as well because we've had reports of 403 forbidden for some users.
+ upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+ upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+
+ # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
+ mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
+ # Suffix each with .patch.gz
+ mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
+ mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
+ # Repeat for .patch.gz.asc for verify-sig
+ SRC_URI+=" ${mangled_patches[@]}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
+
+ # For all of the URLs, chuck in invisible-island.net too:
+ SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
+
+ UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
+
+ unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
+ fi
+fi
+
+SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+S="${WORKDIR}/${MY_P}"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="
+ ${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
+"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_prepare with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CXX,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CXX=${BUILD_CXX} \
+ CPP=${BUILD_CPP} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs --without-ada
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ --disable-term-driver
+ --disable-termcap
+ --enable-symlinks
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=(
+ --without-{pthread,reentrant}
+
+ --disable-opaque-curses
+ --disable-opaque-form
+ --disable-opaque-menu
+ --disable-opaque-panel
+ )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2024-04-06 9:04 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2024-04-06 9:04 UTC (permalink / raw
To: gentoo-commits
commit: c98437dd54163ba754d52b4dddea6baadf3f27ad
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Apr 6 08:58:36 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Apr 6 09:03:56 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c98437dd
sys-libs/ncurses: add 6.4_p20240330
Closes: https://bugs.gentoo.org/922817
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 97 ++++++
sys-libs/ncurses/ncurses-6.4_p20240330.ebuild | 478 ++++++++++++++++++++++++++
2 files changed, 575 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index a28c3a9817b4..797ed94d9f93 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -36,7 +36,104 @@ DIST ncurses-6.4-20230520.patch.gz 3090 BLAKE2B 93e376bc6250509c1a83e799efc2d476
DIST ncurses-6.4-20230520.patch.gz.asc 729 BLAKE2B 08db3a1a8152c4cc29fcc11b24ec3d1a6d3c425eed9a54f33bc370b86f26a13a9cdd273652c448e6e4dd179f5ca41ae653f7ef44902a10eaa18828e2be3a6247 SHA512 7bf2aa9442bc5041ce316af7edc2ff5c5da2ab1bf941c26c6592c8785dc0e47539da3bc2c1e570daafb6a293812f55b8b3b327f90ff9908984eba37e89d5eb7d
DIST ncurses-6.4-20230527.patch.gz 9787 BLAKE2B 951a53b87056f2b3b530f03d0bab5a06ecf6bae0bf2fb580af8c0d96ae169e4813ed2063bf1696fd0fcc1cb0f7da03348904818de7ce454cbcb9a42bb939b6b8 SHA512 f600d7bdbde1f0752d3d530ceb98e9ba51a246a3bd898cc0d0d65bb8b51dab68fa5668789f5f86473c28eb890ec62cecf8e4dc901ac96fccf162c1a5f161f897
DIST ncurses-6.4-20230527.patch.gz.asc 729 BLAKE2B 472421bd7c9093a293e99ec0f343ed471a77e7aa7f705cd99bb61f907c7059b134158c176fb232c542842ba042a1a88ca8e192df81d2d760a70f26a4d76ae624 SHA512 74a0ae5123b339c00f786d4d15a6c100d5d323731b7534e495dd396c9fd03b7ebc61d3fdf6eb71f2fa106160e15da5d093af6e4d53b4a6cfc53c436045a5a614
+DIST ncurses-6.4-20230603.patch.gz 95019 BLAKE2B b6523f5218b819fd53af288e9adc54001a86bfb683f3b956b2e2237ed233b12607116a10c2dcbf4c627dfc52bf0c915ab506fe9693e8695908110524ac4ae216 SHA512 c71863e458a312dd37205d2087e4bce4d3a6abb2c07b15ec90796953c3f422fc30d3094e3ffd176befd1de9eef1067153f8c5be682475cdacdb5b7c83c99363a
+DIST ncurses-6.4-20230603.patch.gz.asc 729 BLAKE2B ed072a6a00031bd4814f195913030ab597c5547f240309cb0fe95460e4c5d6d45477dfb054b2f09cbfc34c4eb583499902146fc498e58811417ca61e7a4787f9 SHA512 95bc59ecdce1bd7499c819e692a2d44f90c9734b20b3903034f94c7ee5efeb7b9f3f31ec1327ea00907c99c6783702af91d648d61b362e56abed5e60e7e11b97
+DIST ncurses-6.4-20230610.patch.gz 22125 BLAKE2B 2004558a329c8a6827818b782f4c7b68bb8c24cb93b22e1259363432c6cc5ebfeb716d81b4f14fd82ca22f70e4591877c9836b3a0dba58099f9fc6bbe5190947 SHA512 b11e7638ae237e0f9e8ebb9c7657759be8d9504775757ff71d2efafe589e4a81969b5e6229c171b5008a5788cdf16e19fa544f2d4b2fd24f122f8cd66ed25d61
+DIST ncurses-6.4-20230610.patch.gz.asc 729 BLAKE2B 2f7159fdac2a3d946ab787ce294704bde8da6cb7482c527edcde91ac9369b349c16b7d267e05d785acdc9447d3aa3e1f231ebfc616aed4cf452fd4c31a2e66f8 SHA512 3e2b6bf42e3b2f82eb51213b58d962ed7d11cb582fad5f710bd3067b2ccb52e1d4a27aff24cecf68a01b2bbe88f0e85c43e2edc6c57353926f60152a9b4095b3
+DIST ncurses-6.4-20230615.patch.gz 3562 BLAKE2B e20de7ca077ce7ce37c59beb731408be16beff9656ab115b23c46d94f95b2b6a92bc8d0ccef253403dd3d7e493b0cb067054b93e06e5cfbb73bdf1485484b89b SHA512 22779515ac54e19cfc9e84ef851dc15bbb8d818cae8e0fd2b866ee1ba20caf4168c30a72c7cb206434cf4db6a9bb09c016210a2fdcc2dcdcf9892f7a6e0bf3da
+DIST ncurses-6.4-20230615.patch.gz.asc 729 BLAKE2B a1fb16d1483ca895ea7db7ffd4992cd1939e9f2e682508dbb0af38d78edaec11f2fe10b547d801783e2c61a33252f24be94c9eb4a2367a19ef73a65f926dadbc SHA512 71055081b458dc285856c9916124025023b59005a2568d252ecc93ba21c7fe8edb8bbe933ae1675a0d3f606602bc19b2fbbbfb5df42fe40c84227547183d2b20
+DIST ncurses-6.4-20230617.patch.gz 29168 BLAKE2B e15a2a1fadfc64ddb64f26b4b267f4ed58ea5fa9b43e8664315caa6858787af61501710ba273ff12a914327b451a0aa329459d48487f9edb882ff9b218f8fc9f SHA512 29e5d387382d38a2297fe3f642441019bf829ff6e94d938eba85067ab455863283a50bd8856e4cba406c840a5ecfa381eeae2d6406b548927320ac2e99b89adc
+DIST ncurses-6.4-20230617.patch.gz.asc 729 BLAKE2B 3338b8020f37c6c19cb1819db9e2b9f9257702603757e7e107b74ab0e7bf1696c0a91e79fde1aa404dc706ba3bbd0e6014ae753147838d5bfc917df302daf408 SHA512 db5ec7182b070db9079978c05130f53659b3bd5108ad246b7f7d6696d1c739149508d1c5f3b9091bf4862d8bfa43bec29f5ecd7787d5840625e99437fe7dcbe7
+DIST ncurses-6.4-20230624.patch.gz 8748 BLAKE2B f61800ebdaa4f982694d38f51ad0478207b928f81b87db3d837bbfc53ba265a89f10add92f5f27a03c54e829a490a8c39a4bf3cd84a0c43bb2cf70ee7795e0ec SHA512 9592247f9eec8d5ce7cffb3e4f7f3a39e4c3c83c96d11db7bd8cdcff54a8fec936651a7c2aece559d0573ac244b59d1ef0b4d2e46368605b9f8e8b4a436e9baf
+DIST ncurses-6.4-20230624.patch.gz.asc 729 BLAKE2B 6f522f12c45de2824cdf6014edf6bc3f377d97a784d3344eae2dc66c4adf1a4043c1982224fdb6a4eea7a582b80c60f8556e8ae645338078638f14a6080864eb SHA512 fbb70541f028813a6815a37c258d7accc6711faef19e41c36b7953880bac645188e101a34109e3db2f263e9ec736fdf91f035431b6e2b84f6e591198f1fd6e1f
+DIST ncurses-6.4-20230625.patch.gz 3517 BLAKE2B d287c8ffb5f6314b9deb9c3954d833167eeaf32560dac674bfaa5c5230179e929dfffeb8d3d2a4310be7821a26a677886139e549b5d4376992eec9db9a0e8ae7 SHA512 bf71c7a5368d6eb4e676d57c720314f01b25d4a51108ba2018b3e1d4fbab736e18a7a39e2a662b611ee272a2a2afc0c267e05807255ab7f07d8b557b7895fc9a
+DIST ncurses-6.4-20230625.patch.gz.asc 729 BLAKE2B 58d5d4415cb61ca15de15f79d6f5ae16e28a372676ed26754e27d7cfc70b9aac1a23696b174ce9069beea0263fab9ca565879b2e9cdf6a150f7c0ca4448e1439 SHA512 9512bdb1eabe4bee0910969c2219748a4f88b9ed1338ce1709d61e3cd0173dfa583c050fea18a69f8b3fb504b4915ef40a5f0b9c61fd3acc96512c262dfabd2a
+DIST ncurses-6.4-20230701.patch.gz 62047 BLAKE2B ac4719825504f20195ef4ba229b1ee29649eaff66d63ffb226553050a1727f7b08f9e7d93bb5a7f042218afa2834c1663943cf3a64b6da6a10348f5637b8cc21 SHA512 e027eee228ab3473fcbae0786c0cf6b6f8533e861c5475acce3af2162f55b8ba6612e292d046864857a600ac3f59d2d6001a3a30a3d1b1a4239936f147eb5083
+DIST ncurses-6.4-20230701.patch.gz.asc 729 BLAKE2B 1ee18e5ff3782c2f271dbe857da94fd6ee4c994b1faa81b9b218b665e1e4e61d9b62d41c5439cc681da1b2a7b6fb3f3ea284387748680b483db473553b46e4eb SHA512 a53699f5c5d34464616e11d8c21f5d5e5b0f567fc145a4ad6abdf397807cc1215b9cb769deab9533873dc9779e267522fa6403ba1b56ef7fc058befb2a37e19d
+DIST ncurses-6.4-20230708.patch.gz 6669 BLAKE2B 4c662af33d9ee679abeedd275835ec786e2099de7e87d447539655147bafd08fb28eda64bc6f7d3daca2200abd6e351e5bad18a7592c1bbd7eb15fb8cbed194f SHA512 551ae4c5a0edb9d0e830b3c87c8ffcfb45c35537d60971bff72ab4d479cffcd7b5fb1db4dfdaec4b5eb2a06b0a4ec17074fe4007f2cec441be28dde02805174c
+DIST ncurses-6.4-20230708.patch.gz.asc 729 BLAKE2B fb54428fb1f43ce3505f1a6c719aea357471e5a488497ac15595d97201ebd6fbc109630e5927e1bfc53635f40c4cf2a8305c89d60cc8c570e1e4849e50a2512d SHA512 dd62ed66b315a350a12dff03175eb7a61ff1f86aa9b66683cb0c940a27cd30542492005338a7c099d81bfcdc0c6b0139b139f2e12f194b655caa6e985658343a
+DIST ncurses-6.4-20230715.patch.gz 53780 BLAKE2B 71216e305cb55efc55ce18b40bfb2390d3d23211192450f22a06bd35b8dd3460a0cd6bfbffa012f08632d34d4d5030b70446cd1466b717196949db345724bcf4 SHA512 c145dd5f5dd59e8cdf80b37cff427ff6f0af1597c4d550f8fe2a09a395b57cc5d37968d0cd84868539215d1750537a7f5e554410abba600e26bbde51f9fb6c15
+DIST ncurses-6.4-20230715.patch.gz.asc 729 BLAKE2B af309534f6ed38596cca07d278a6e40addb6198f26bedbec5e3a17d5225be7be5efde3a6b1aa9e32d085edec347686c9771677b6b37633b45f4492598c24f881 SHA512 2610bd6b77d68cee82f5a295200d3d2459805e101e91a28a42b3a8badb230ee29963736a4320060ce59b4c9ed40a69cc9111a49ebf24e12114d03bf5a836ad01
+DIST ncurses-6.4-20230722.patch.gz 59087 BLAKE2B 16e94b44300010930a55ea3cf0a9950aa74e9937acc09246b3943addac07dcb98c0a0bf59eff0bd6ab2347670ea0f25dba3a19504c00a5b4a0fa988026080911 SHA512 63f067d289c807830b1dd327491a43669563710f6f5b1d631c62d75d654cfa9cd5767e0bfe0bdec65777e4c92e045177ea864d370007c9f4cbff4b73e3a0a0ec
+DIST ncurses-6.4-20230722.patch.gz.asc 729 BLAKE2B 8f915ff9d447bb2b68bee18fa40bc7aa08fb695aa873f983bac4f162c7ab355bf59a8cfdd03a377ce55e1128b4215c1265fe572674f420fc410d07ee1b4e3d98 SHA512 3c45f818e6bff4c6e9aecc57d4a236bdcdeffda6e8d342cf0bbd523cbff3af61bb27f8249789208540df4702bfbf6c7473b165c00ba770408b0f2d2547c39ed3
+DIST ncurses-6.4-20230729.patch.gz 54267 BLAKE2B 3c3b6fc5e24bf39b4c0308254f86a53cc470fd79d42c0b4377346642633fb04329ea4e7ed167bee4b590e9ea66f6e59fd73663ef83e4a711ec6fc4ebf8ab1427 SHA512 84ec8e0429364a25d0b284a19d8cca2d14e6308f0a3ff07d1a214e4cdc93430bf3d249471518c675bd040cf113da3b760337d7f268a776318b94b56c10264856
+DIST ncurses-6.4-20230729.patch.gz.asc 729 BLAKE2B 0aeab7b90c4919d97df1fd7c717a8b27a0d506a4d04d4b73023089298f0975cb1905c9f6ea0884bd83fa63769d9b27d84b6b26ecb46a84b3cae87a5b3fb8c4cd SHA512 eadac56f03b8630a21971dc37e5a9c9afeb0402d9f784cf1886d7a5f737ff4fdd5d4caf37f7bc96d2ea13e517809b71324c850ab21854ce918f81cae061d78cf
+DIST ncurses-6.4-20230805.patch.gz 7681 BLAKE2B 1eba96968b7835555c22299c59f678dc912f03c0a3c55dca87f796e590f37e96442664174ad609005e2d6affa011654a4729f1489d0bbda6188216e83c500d82 SHA512 604a098bb5888209213254d195da8bee6b16ecadf5cc843cd50cf504c9e9dd4b8e0115a4ed512dc64e57567270fc35cc10aab3dbb81f1d033e928ada8a4d3610
+DIST ncurses-6.4-20230805.patch.gz.asc 729 BLAKE2B dd8fa046eb07fef7b60b6854fc0c8ae5917abc9ad1793ad3dfb699f1d0537cd17ed3196af7a795525d85fa5164156e4dd33af4c13934909eb9dd11d3c37dc097 SHA512 59db184440e47d1a702cfc5ee1eaffc1c54664015f727f31fa5eb5a1cf6f86b15592c7918401b69b633bcdb6534be6f29dd20c823fc98a934dd857628f6e0b53
+DIST ncurses-6.4-20230812.patch.gz 21242 BLAKE2B 0ad1068e92016726fc56c51843897bf2eeb85ef19236c149265feaeb7a2bc512b1f897695e1675d58d8866fe75f7bed3b9731c079587a6c02c3a5d420b6e76f3 SHA512 e5f2ff264afa44f632a45e050bbeab59d2f7e27885f9afa72db32cfd7a672f95de998906df3687dffab5ab3a09b50e24bdd3f546e7c81a6d521ebccf3a868749
+DIST ncurses-6.4-20230812.patch.gz.asc 729 BLAKE2B c2551ef9da2fb12a9c4a8acbb253dba7d5a026c295ce43164e892dc0149438a5c67313fb8f18ea3702bf250dbc296a658557ca14d4357e7ca44b64a6e008d05f SHA512 61f81ad20584a20e2c15ed2609406f31017102bcf692d3cb05af4de1bf48be7f68b0880c249f33b0480dd64307b0ea97ba1774f321edec10fc0692c1e8372094
+DIST ncurses-6.4-20230819.patch.gz 24761 BLAKE2B d7b8b3a375d7168f83c904e0ab350455ba51add882bdd916dbe5fd65a1e51a1603df79349474cc86245a15fd3e2b3831e093b271c9db4d5629bffb793b9ff5b7 SHA512 30c1a98a46dbede109f741dbecd379d9bedd42a365be4d8b935ef745f03add48dbb44defb2ed7c102ed45a68853183d0e38a08cf355cc4f4bb82aa29203a339f
+DIST ncurses-6.4-20230819.patch.gz.asc 729 BLAKE2B bf5eb879b781b8373d3f9dab69b3c6c027217af5e67734de01e292ffba58ab386b7b9f939ad5253fd330918b3d799e9c054ddcf9b454d2e84e4cff4262e62ecf SHA512 0e4ae793efff9c019858d9a0821402025510a4ec3716ff394258758665022b639cfff6e9c5fba698acc7b3bb74c039475a41511f62141e570da3f19aec045eaa
+DIST ncurses-6.4-20230826.patch.gz 6017 BLAKE2B e20ae640651f24b71c720a71538e8bf89b61fc63ca2ddea04725f66b83587d2c6d26c70ba25489d9e268793678a8599eeb7f0865ce47d9a89a46d8e9ef57f784 SHA512 1af5953e241606b9cb2d3b12f45da9f2348a3bb40c1839850e3364639ea5067bdb083f6b9518669aa42b8a624d87b2546947a2aa8e74ad2c6c8f1c3fd15db5f3
+DIST ncurses-6.4-20230826.patch.gz.asc 729 BLAKE2B 147e368afe357716a70c520e0a2e92dc134f8d6d5f387e8f00ed3d3e9b416b5e3ba15ee6a02e91abebc41c8798df3258f44a561f79d8b19837bca5f9e23f6050 SHA512 84184f7b0e30dc44b01f4556aef488100e2bee730d19531a918b5de536414e814820bcca59c25b79c14befc5049d76fdc0f8048889ba16590d96edb7e902420e
+DIST ncurses-6.4-20230902.patch.gz 51844 BLAKE2B bbb6d896e2717feaf30ef4f3945441b9fd80cadd96e0319b27dd17c0de845f50721380f0b5d054aef0413b42e596778306fd9590b6552839888cd7dce94fd197 SHA512 1d849f4447066e180bc5f0c3c62f6694a32b4b254d732e4304fc7b8eeed276f790b6e87846eff625d8a739c77fd38304a33e1b3dc8c16824adeed9c51c6357ac
+DIST ncurses-6.4-20230902.patch.gz.asc 729 BLAKE2B 3a20532b223263dae2c7a6c657983c113b465d74d8b690946c46e70187d17c4ab743bf837fcab5aa6bed7f2ea9d604c7a3b8cb37ebdfc19b66683d12f839020b SHA512 aa3de6f6bc15d76fe867bcf0d8b8e307863ea5fa935659f0e2a5e7925acc1eed6e02b70f072e6d3250f549879d41d29038814b3a5483425af5e4c4eca524a443
+DIST ncurses-6.4-20230909.patch.gz 19653 BLAKE2B ca11d7df796d2f1a294309db49cfb9f8c158f2d3db2ee6e632e8f171a737d5948ee239f4d2f5fc7fd88d68871f70bbd3589cf53d677eda2420235f475d6d96a3 SHA512 340f685e1d7a495ea07c7c492b2dae4e91005ba6596d4590e28eb3067a3485aab4d4b390856837577730a0a3ce7cc7523fe19ede50d5d6906c407a576b2bf401
+DIST ncurses-6.4-20230909.patch.gz.asc 729 BLAKE2B 213018592dd38ab9b8493cf45a2253be44ad2497412af19c5e93aa6d940896fbae4cccd0ea49a8efae36ac72b592a371c1b517fbf3bf6f07563dcfb9d0a857e4 SHA512 a0fb4b1f9c2df404a792e71f29f2397de0f14a695adbc38e379278e9a1c4ee50ece3fe3f18ac85217fe6ac5ec6daf06738548f8af6d8db2a1fc3db54244c3500
+DIST ncurses-6.4-20230917.patch.gz 153988 BLAKE2B 6df37b08266c350de4dcfa28cdf67a546a64675414d133899c48181aa8aec5ae8f73dbe7932733a406cdc1a3fc7933f4bc7884c744087f057c923f3f3d7224ea SHA512 75b4363c1ecdeebd20aae2a2289e0834ba7ce2e0ac104f7b47179ef651efc0d9255174a0bc2a374d3e03255098715c97b84d917d0268801288ae5e1d9df59ed4
+DIST ncurses-6.4-20230917.patch.gz.asc 729 BLAKE2B ecb3c166924454271a49f17d8f1f84f181cf490bf486b0618b1d7b2c7bf0d4aaea4da5cc648e4965e5f8f3c12d9cae0f88fcde8958b7b7c7854e19196c3ff6e2 SHA512 f6d81df216d2cb8e2e741ca0bfebe164c96fc8bbd88d17bab79629a74965b416ded77067dfe6beb751e6b9ea0f2807d7b345aa093b1e0f2c352a439c3d34f621
+DIST ncurses-6.4-20230918.patch.gz 1772 BLAKE2B 2c5b08699b1171c51940693c253d40580fcf34fd3053ee0146acc82da575c2b08b0a43b794b8425c08edffcf3cca37dd6826b1d20d4bcf8109e1a675b405ec22 SHA512 e8f9d325278ec87b3971b954968a061d5fb2345d2c1035348a07834bc1135c6480bd90c9d0111925729c7000c44c2b45853faa1db784f230ce99c156779487f9
+DIST ncurses-6.4-20230918.patch.gz.asc 729 BLAKE2B b590981a91a23b98273b8e4c1d0d12f6eadfda00e4a8f77d7031de10a21bacd049de9c440bebfbb29be9eb5d99b2dd43f2068a1af6dd7d50c9389173aab5fd8e SHA512 bb1a800a7a5eacdab7e95816c035ebac8dc190c55ceb41351b1a0169d5a63a2fb7d26c93738367ff7ca95c9769e06d26c67a0f2df04c6b3a93c924c35181253a
+DIST ncurses-6.4-20230923.patch.gz 61673 BLAKE2B 5501e262a9495f30ac79c327fc95d0f5e54e8e246db7c3acb329ff08e17a2e7502f35f8b8496386b13054471927d52494dd8e6b534ddbaf555c11b312b520ae9 SHA512 3892a8e3fcc3c048b20676931b6be02158537db3afba87d63262cfcb2871eea978bb84879bf5f8fbc20ec52f411a397de50bc83a35de8ba5bfbd22f247dca5c3
+DIST ncurses-6.4-20230923.patch.gz.asc 729 BLAKE2B 327687ccfe242f4bd82631c5b92e0146181b2ce795394b44119eb64a7b88739362502f61fffaad780c031cd9f98da7406f3d2bc1818f6fe779b25bfe1bd63a05 SHA512 2671b781ae1fdb5d6573ef14d5113c656c7125be1745d2d94487e44031d39438aef56c992fa2d59cbd3a0e20265e552eb3b0a9b25fd8ee37af2de5d9189a3768
+DIST ncurses-6.4-20231001.patch.gz 101411 BLAKE2B 25d644b708901027f443c6d93e30860bdc2af2d41995034871fa9a33931bc7ef9c6d62ceaaa96c139bd46a4198e7b727e7c0fc1c130cd495fa8501d45fac993f SHA512 901f391634fed7bf7e46db8a2242d9c4f7503e84ad31d9068e9bb7fffaeb0380eeffb60992686bd8442a033205ac9f27688612be1d26c1ceb30708c62ac551c3
+DIST ncurses-6.4-20231001.patch.gz.asc 729 BLAKE2B 92e50014775ef7b096983c2375884464b299c56aa49622ee095ee13b5cac598c77540319644f9c04e5a57adb57d9d01d38f5e8122e027030855789b06b766024 SHA512 051b62b3550d2a78799214f08e3e61b0d3bcd964d4df5cf320c44861a812033805fb9a5e5f079cd9ab6e75c5552c7a4b3a3a64211f05b94d602c5d8a8ef041d3
+DIST ncurses-6.4-20231007.patch.gz 67626 BLAKE2B 81cacf8b01215844ceac5d5e8e4b8b7c8df9b4d8fcf07646745b6d8f97af6261f4999261afcbf9d7ec4ebd333853350cdc7dfeef84a33eeea2b0729977a2724f SHA512 f3ecf1592fc72906e3a2f9586061a9d7c6dce31d604e5da9bf83c9d90147fa747c2bffe006121d14e318eafa0701c2f834f9a24968244cd86aaf65b3bf863ff6
+DIST ncurses-6.4-20231007.patch.gz.asc 729 BLAKE2B fdfe7216e44b1b5dc4bc10d495a575ebdfbd611a85540b3be3aff4be8580d10b7a5b335d854d8e0d85d5c811e9360de6ed35437cd8977091d847014d03bd20b0 SHA512 d73163070853034a23d893619fed151757dd153da7aa579421a48deb4f82179e69f2ad0e090a7c6facb43709fb07ed5cf515436a201ee40400d16e9bbd131dc0
+DIST ncurses-6.4-20231014.patch.gz 189356 BLAKE2B b974507e8f5f873c57dc8d9a2a008cc577b47717d7a1f472e52ed06c5c4c182fdb9baa3a86f023dec3d63b3e00102d6b0d1ce2a0df6ab97140dae93f76e8c12f SHA512 195e220f76d227b7233551ca05d5368f8bb3ca58b0a3dc26774831ced6b4c69cba8051bbcb9099f474d7a86e12bedafb913aae285441fc51e760edd0550a8697
+DIST ncurses-6.4-20231014.patch.gz.asc 729 BLAKE2B ce6b6da4fa06d6b6f9e0674f4b64221f88c5477ed59fa57c5065934cec388d91b8b3a90e0259b477c4eb5b2fdc946207916cd3a566180faa35b169c53ca48db5 SHA512 70f36abf69221bdaadd36797a2c846dfa623a4eb7c27fee1079a1fa4c95e6c5ebc1ff7a3ac6c0d2e4761b96967c1c6afc736f593d93a0388c09c3c3b94f33af0
+DIST ncurses-6.4-20231016.patch.gz 91957 BLAKE2B 31564200abebea4d904a428fb6ea5e1bf9d100f67e2cd5db7683c4cbf9ed2aa0aeaccd390f4c0871da5a5a60911e4ed4e97a08149244bea0a2910a0248f4bca8 SHA512 c09407f16263f2dcb49cd70ef05adc039f28da7124e46a09241f9be03b729a80352afe693ad8f9013d18b0bd78698ba588582aaa0759b7ca74f445312ebb9879
+DIST ncurses-6.4-20231016.patch.gz.asc 729 BLAKE2B b659353515fc77d04e0aef074e243362041907fb96ed15fccd819205edb12760004c2e434f98c014bc996455da608942b29cffcf090802da44da2fb9cb466652 SHA512 9a50d06b351ace9893fc9a5d08c14968cc79e6eec99c5914a545e6912d1e518db6cc33a725f5a6839261bfd03bd2d4c27403b7cbe53101115e11189ba8225899
+DIST ncurses-6.4-20231021.patch.gz 104022 BLAKE2B 84985c8b1bb3b3cf0181fff3ddc50a378e144aed5a3896e44d0fa56fd8807ec8c37a381a22d87d0aa7e693a0a0363e3e32614a0ccc3519f89aba6fac755f2c55 SHA512 0435ada2640ec65894b47a3f07d4efa1c5a15d46927cee3f57458e0d440b94d81a2869dfc34f1a271b6b0a0b9556e9860dd67806159e75265d875bfd96d58064
+DIST ncurses-6.4-20231021.patch.gz.asc 729 BLAKE2B 4a1a2ce1b8b237c8e67f4a98f604a390917c87e9ec96ecdb990413f631cc5bb62af1e4ff8677c51f32ad6a5d8358321c33958f4d6cbcb8d56c58b1d609802992 SHA512 7ddf107ba2b2f59daa639e5f763ccef97a066dc5e19f5014f1b295db2627c300d2b4a528f1cb3621796944fd63ad11dd3aaacc234addb794d6a494978bb32b1b
+DIST ncurses-6.4-20231028.patch.gz 113875 BLAKE2B 16ce1507ed43830840068ce5fbc0777af46a71a14fa547bc73d0e42e6de5062e83475b432f8e849121d56371a7150f223a37b9d76c85d932e60bc33e4131d7c8 SHA512 9b91df0d75315a7aae8c5189ad91dea1d9d45864694494c3cf9644ac341caba8217b931d4082ba89090ff0f2ce9f06d75cef7c3fd9e45db49f708ea88ae4f947
+DIST ncurses-6.4-20231028.patch.gz.asc 729 BLAKE2B 5d500540a1e108f6a56d24fe3e9ab6843a6cf9f5dc330f4b0146d53c9e5cfb64c647f21031bec31353bf989050a4b7ec835eb928a34ff6a75b8e26ed4f40b606 SHA512 732222068452d3caea4e67edd459dedcc5bed7ac35a8db98ec319278dd0b8a65c05729c8a095d0756579b90a80f9f2580f6c71d2dd4804445f7a54b5872e192f
+DIST ncurses-6.4-20231104.patch.gz 6145 BLAKE2B 458fedf34df29affda1970efdb9d8acef28d5f469335d78b62e6ce25da7cd05e21905ae3a7de8ffd067b64d07ed8e76f53f6f7aeb94926165e1b94191d441874 SHA512 35ef3056d168db5e031a18c497ee8d5a9f71b760ad517aded3319829e722804d62685dc49f74063551663e11e0a400584ea455fdc3f0a7bc06bf5a24515fb0f5
+DIST ncurses-6.4-20231104.patch.gz.asc 729 BLAKE2B e7858261fe5de878d37a2c052723b7889e14be6ef5c6efe75859beb89b68ba96eed3c0691bc9465273aa277d17927ff7dea60d81c0b2f96053742733fdb64d0f SHA512 900bb9fd5ba729f76788fa273f4b9d04747a8c7fd627d358621222f9965864b59c1d989f55775b766d099a1a0081a6e195ea6a16216faa77c892154304da58d5
+DIST ncurses-6.4-20231111.patch.gz 31095 BLAKE2B 12ec2d5a693a9ba34abeb1b5863f9549594734138b01a698ff9a55c9cc0519fa9777045e22f3623171724ff4ed841f8ee373cc2eca540aea19a325e0c63d24d0 SHA512 3170ac79bea59a1de9f91b647ac41a7f2df3c93943bad1573322cc3911337c16db2e55563198f6dd5c963c31800636fef98ea7c02316f049071b2a41b6b15c14
+DIST ncurses-6.4-20231111.patch.gz.asc 729 BLAKE2B 2b3e510d826905afe5cf23c4737874cb2a569bc6fd3f081a0eb16777d2791d7fad46d7620f1f229dd5ba9652095199c684e5e5d6e8f38947226664021746c24e SHA512 bfb5d15779ed7088bedd7ffc26d16af69fe8b83706088a5171daa955425e1f0697429f3e29a5d286055790bd2e8512d6507e85e2b541564f349f8c3dcf274221
+DIST ncurses-6.4-20231118.patch.gz 15202 BLAKE2B a8cd152e11da3eb4b7687e1ce05afb86c11d519f0a798099c459bd50a7e019353c71ba55ba7872b57131948e945786d3821f431a3a0d5279ca0bc111f080a5e5 SHA512 d3ecbbf17b9ce8d899fe2a77fe884ebd95ed091d0f194ad6fed98aa9897a59642242b2a3a04b0fda786251d7f584b3ee2fc402d88f3c1a4ff8ba600cb8e20d01
+DIST ncurses-6.4-20231118.patch.gz.asc 729 BLAKE2B 76767bba1425ea00cb06415c1011bd235e95ee8b360138d237224972802800a90c582506e121c2da63f6ccd90ff98193229522672f6c66bd68af9cba3988a271 SHA512 fa3e4fdef23e2ea258ce1068fd18afbf68b5406aff6bc37d78556f2337f9e0341290641dc106c862596e8fb62606ed13e2013afc66c5fb90c13618ad561e21be
+DIST ncurses-6.4-20231121.patch.gz 2725 BLAKE2B 8acdf10bbc3db2236e6088591c19a4c4996e8ce337b7155828d82474b2dc1f00bac68bdd530356e7e30c44c8aa0b9eb5a0504848b58b2406bfd5371e42c28dfb SHA512 673b445f4393d3705cb497232ae58f7a5dd07143a10973a319f40411b946bc0b2b22ba8ae979ce3380fe104077dc63823562349163c266799b777e7f3ba9f716
+DIST ncurses-6.4-20231121.patch.gz.asc 729 BLAKE2B f91437a508906e28bdc9b0b897150db6144280b965bd2c669656a84dc4cf180a04b0711b8025f536bded39ea3af02487d5067fe8b1add76a7695778c58ec590e SHA512 1c52a1d935ca7ec367e0229face73c522d232ab1ae0d3ac33b7d2d5398823fb6b7dd232c7d3d3bc08026b9454367a9e9fa86e8a2a0a2de754bf638e594dabe83
+DIST ncurses-6.4-20231125.patch.gz 221965 BLAKE2B a02689cb8f5ff85cac11a31559c261573221f64e55e25ac55ce17d648cc56e3db55abd8742fd08de8c9192c51fcc83bd95c877cce8cf5d18493e7f3567cbe581 SHA512 c838aa74fd81463dcc99bc2ef50bfc382b0bd0e277f46ef996a1d7bbbec2ca9588b4dde626965170b083cd385b7c34ee1e7bfd25fb0af1abdb83da0da9d05d7b
+DIST ncurses-6.4-20231125.patch.gz.asc 729 BLAKE2B ea13453856f8b4c1565a3b708253ec7a35d921e6a6f162022370cee17b261a7fdda861655bbee87aac09f481f3b36c8b6181654d5c5d7e8468ee9a0d87399973 SHA512 e7174e87d338d35e487dd1f9af22fdc71d48f2ab2ac1f8e8158f08994b35395f6f5a36b75d0a803af40e59d91fc47e1c064851c2cf1ec02bc8f64a8f5a0f4f96
+DIST ncurses-6.4-20231202.patch.gz 50653 BLAKE2B 20d9973db850d0d19003204308c052806af6a44d1c2a03f233b0a8c25a3668b1fa650de91ee2f6083eef15bfb711bbb792f410feb918afa94d75e612f52678c8 SHA512 08ae960c00fe1137986bb5f19e3ba2ec96fdbf6203fc37636c95bc8aee3ec204158a8b28119c9476df41999ecd77aed5f45df25c9bcf1e681f0404329f14afa0
+DIST ncurses-6.4-20231202.patch.gz.asc 729 BLAKE2B 25f07e646f17b6083c0cf6d57fd9bf1cd8a68e00f310c3ab68659cc0412bead62dd1428223b7390dd5dda0695f2803b15456462d2c275da84ec79742662a7208 SHA512 a28fd17268c12dd1b395523bd307aad98ad91ac6aca0e6557d74b56256dc673d1dfe10665dd465d96ff0b44eb891565ff3003e7f7bbf7d72b52c09c8adab5f8b
+DIST ncurses-6.4-20231209.patch.gz 81338 BLAKE2B cc8bbef3e8ae839f67625e2e7c69f853a838e1be7642db36b0768c37980b069d5b5a685756251b6a74fd07e44ea94644b745e1f4fbf2195d9a7c132797d84ebf SHA512 40057fbf43fe26debc139f47fb39474843e296fac120a9a8a17e2da7a7957b15cd73ef7a97d553ebac901cac3f8de2f3b31d7d14503ffc2c61c9b9b4049800ff
+DIST ncurses-6.4-20231209.patch.gz.asc 729 BLAKE2B 8738944f8138139d701de123253d63d1f61c1c8f92c63e6d6e5c28516d338db693151aa295700128cd56e53f0c28a2ad08006473d4e164290b1340663d35bda5 SHA512 647589e2d820ae9ede81e7119b08e9215de63f145cf51c24c337bd86983a7b2029c6d51f53cef6fe97962f5a507f3b64f4512c15af8bbf041796bf5beaab275b
+DIST ncurses-6.4-20231217.patch.gz 189513 BLAKE2B 26c0158ae6b82576f2c7f79f881417655551ed208cb1af18fe54cf0939d2a9f5c3f109b07d0eeed0791c6b332bc7b3dd4a5bbd07f59f4ba83389b3800c0c78b9 SHA512 cc59856be71ae35c8c297c19d1f4ea39484258089c95b72b2a41b150edfc54fcf59dc5c4e6b155c1d09f556263af56e3d0cc9678515081a5608c8d9289051a58
+DIST ncurses-6.4-20231217.patch.gz.asc 729 BLAKE2B 70a4d98a71d5346b311e8b5a3fc3c30520e0c5d244f42b219eb0eeaee7dc51fd7282c650058c2145af6603cd25f3e24346a6c21dc5fb4e15d0e0fdd863e9f4fe SHA512 b4e18ebf39f4591a22228da60d9ba95d108c087d7744daa4b33c65ca702b6723e44c240e2e8d508606da6a11f1c94fa70f23a9aa2066ca38c1ddfbff2a0141b7
+DIST ncurses-6.4-20231223.patch.gz 107172 BLAKE2B caf812ee111a6de68a4958748bb78c1ac640c94ed975527ba682578951d75d10004dd50ec0cfdab5eeb76bce2207083abc04842fa26db9395064f72304b2856c SHA512 c6de7bd56566ca3bd5b789bfcaa1188573400110ae35ce5ca9d4ea230671a13296360fe3a4862a097d436b9e5e422f115867a8879745d5486393a9bb829889ec
+DIST ncurses-6.4-20231223.patch.gz.asc 729 BLAKE2B bd4d83e2c102cdb899854ab203a675f02a82ab21501e7dfcf656bbec19d813c0fc2f1a8d0cc126b20703bda9b7a057200ebf813444b5dd18e35beb50e80f87c2 SHA512 374c56304eadc88eec577741e884c0313e3419e9179a128bb92d5e622f4ead3dc3e78ec25421f6ce813b38598a699a8bf7527933c95cad1f2ca181911b0c39b2
+DIST ncurses-6.4-20231230.patch.gz 75387 BLAKE2B 730aebf19c91cf02ba7f28672271734e266913e49ea83c36aca10ba7c7932c335898c8ef294d881f5ae7f263a29886083eb90ebc5f2b9f9e1e60471b0d97a9bb SHA512 6ff39e65fa674dde1aa377db47d66d6143b107199a41e6497c8633125d3713d063ac699435f9bbbf2c7f8a40a5b06433d5083b0069337ccce51ebccf5e54bfcc
+DIST ncurses-6.4-20231230.patch.gz.asc 729 BLAKE2B 490fc8f5673f2efed7e62bfd89d1d8ce7a7bc11d3fa7a59f68720a694a19bb5bb44d8eac86695c5173044c1128f95dd1d1ce341554e498e6fe429cbc4857c968 SHA512 abc3f3dff374067ab5c2ca26e752bff8148b658efb3507f59ada10143714b8b70710f691afbdc7b231bca0b4ab4db2fc74c7c9cffac8e758a8d22d0f696d5a4e
+DIST ncurses-6.4-20240106.patch.gz 77283 BLAKE2B 50234e8452ac53212271f2a17d1dbb2308fa2c9b68ebb51c272b018dd5c6a4b9769adcca9b718b28fc7289698c01f15f60497bf99a9102e855cc1d8fc44c0412 SHA512 66ae87b463d9239c6953305b4bfb69434d50c89fc0ce3877f1e9dea54fda427e0c8ebbda85275726c7ee1c07b97d9163c73d351fa8fc7c6adf30361c89780b88
+DIST ncurses-6.4-20240106.patch.gz.asc 729 BLAKE2B ad5867bee1ff817718a9540624eda20b6ef62a63b7a19728c5ff0b988b65ae64fc412e196badf29b7c27b629a756f2899c88e29b9f5cb15b90a424ea65a0ca59 SHA512 805a3d86cea8b099d3d45be5d794de73c01e533427bedbf8ad86d965bd3c84e23e9937c1c0ca9898c3b2a97ddb063e53d88481d36d288c6aa554d85c5db697f2
+DIST ncurses-6.4-20240113.patch.gz 212108 BLAKE2B 8cff40c4612e0633e1938cfa82e255b99efdd4c6383928c59cc0a46922b76ed758881b7ec280ec6984336ef2bcb6ac0bedf85fd1844add9337c9a6905e06d3d6 SHA512 38a59a574d53008cc3b298a45b08b86cb873dbc130dbeb8842f3fefbfab6a280e291bde187cd2e50b7b221afdafa087889a6b5faf305fefcc5444402bcd0b0fe
+DIST ncurses-6.4-20240113.patch.gz.asc 729 BLAKE2B a62a912a0b4d4d08a6b319e3beb0ba17c5359875376e920a0a31c8697c82b7a9e2bc2547ccf95fffe1def3f299c1d1379ea14a34ff86b3fff91adb9c2317d53f SHA512 473a9aabe87dcabd19677b8da1dd060212757fa50dd06008bbb188c76a53ad147c15c7796df5a643d26621bb2dc440dc8d69554198fd1e3478394cc15d55af76
+DIST ncurses-6.4-20240120.patch.gz 150509 BLAKE2B 89bdc8a958582269b48116a2484015087fbf53bdf2e52bd80cc2fe9be01dcd317f83c1c5dd9e6a9e6ac9f06717f7900ab1828bd2d69db891361c5fde8ea44592 SHA512 5c1fbe8fbcf375d6392afa53904a747e7bea1976fab63fda35db92411a4770ca4f71f3d4020fb51494d543a1a33ea743a590a473107e38b92202882bb17e4903
+DIST ncurses-6.4-20240120.patch.gz.asc 729 BLAKE2B 5c8a59cff6de9a00ce82d05be7462a9baa5c01cad6cd3173fd10224ca3081c0f7eed9b6b451bf3921b1ad4a7c94379848f8dcc3e676a0f6071516f64150c374d SHA512 def46080c3511258d6ea4df09dde6b4588d9c59298f938afd0f48507c4b12b75140c8801eb6e937f265328613174d0237f02871a52af68b57dd8b13f85620767
+DIST ncurses-6.4-20240127.patch.gz 24225 BLAKE2B 571acc6b1f0c194f88f76b4fbc0f76a03db4ffdb41acf813a847770c3642e3ccdddc21ef2c26a40de347ee3752749f3d8f9834c4418b96268cd69c0d3d780aff SHA512 0d97e7e4837804b2daad92240300bb4267ba7a845271adbee9c8e2173a973086180101365fc77fd21f61aae1ab7549764cb37b5bd8edaabfdc6deea2baa11379
+DIST ncurses-6.4-20240127.patch.gz.asc 729 BLAKE2B 0378d7c11395fd27ce4366668c69dbef84a0399cb3bb43673bd16334b04fa4b5dce321ff2543b1c79d67c2bda6cdbf795eeda994a03c02060bacbbd0ab4107b6 SHA512 293371e914b5577e66a9efa775a6409ea19a65ccb3086b277a7ec083ae26c00154c7fd15e1d30b86c5bdf04c72245c7f21da463a5d29f109f4c7e4f6b7945e97
+DIST ncurses-6.4-20240203.patch.gz 3868 BLAKE2B 3859b1e5ea907a0340ab4c1f0f211c4264d6efa8a04f7ec21cfb4b4a8e8f956822fef926f24bfa25ad6c8c1b0467a05a96d5316dd7e06bf71ce894b6e897d21a SHA512 729ff4a076c5285deb8ef2a187ae4116826ac2f50aea6cab19271119035d13f93b6ff0fdd134e1066b1075eac5ffa3289cd3e20a32e0d07ec533e34818496885
+DIST ncurses-6.4-20240203.patch.gz.asc 729 BLAKE2B 9de1398c7ebe91a10b98364f12811daec8d1b9178514146704810202d8acc2aa30cb7f5b4ddf62c47794298fdd2832a4faab644d63cd07f6b60c7767d6cfd5ce SHA512 ded529f2f917f9b34db3fbdd221b91138b14fccf123e2a2a89115ec3159f3d2085a9f639604a9df085848837f41c437819e74cbdccb92c238c301f75f6308205
+DIST ncurses-6.4-20240210.patch.gz 3820 BLAKE2B c200bc74b5703093beb85e4ecbb49c8a7fe0e8377a28b01af5929ffbf44583d1d68add001de6e565010724d5a66c5a0e1735117753f7b8eb31050ffe2bc17de0 SHA512 8ac1b766fec97d1aa6bd61b02ed176acb70e59a7833f8ecfbb4c8b8d80529609a58f6f7ec6d410b7fcbae32f818af3f613ff571de7e4ae53e2f1ce7b0f93739e
+DIST ncurses-6.4-20240210.patch.gz.asc 729 BLAKE2B dd58d7dd963773b80b497b5fad439889922011dc293a9c09b43f40edff5abe5884e05691349e0991a348bd531920f1c5bbe6a0f5f7306b86a4eeb8234b187244 SHA512 7ace2db56b71e21d8c5ac5786cf5e3aefb97a767f08fcedf90e76d26bd5f3770200f89cf7321a9876870bfefa9cbf0f2ad344140131f5a2d3542f57de289b9ed
+DIST ncurses-6.4-20240217.patch.gz 13442 BLAKE2B 946d39849c815a3924aed7ba5ef96321b79310bc4822cf44426d340d2156c0977eb8ded858adbcb7bb6fdc08931d868b021572a5b28ed871493cd11967b302eb SHA512 cd486f12bb11d0e6a4d575902d22276be3bffeb66ca5e83d0eef05ea7474ef91fd174d6929e8e4b05625eee9bbcd06618ade71509c98d208f84bea031e372f77
+DIST ncurses-6.4-20240217.patch.gz.asc 729 BLAKE2B 69a3ce2018acd626babd44fd0b286d29d927baaa7b381b8feb2961b3c5a731905ddc0f0fe62252101497de7a49adb150fd8e0feb04db2d5c2f78ef768d9cf593 SHA512 81f4f4c9315ef1605459041d2a523c8751a926f72e93a513bd922ddc27c91a999a11ecffa79a21577739dc6a46f23317d8867a2a5b8ecd372c5c820211da71c3
+DIST ncurses-6.4-20240224.patch.gz 11576 BLAKE2B 0ba4a7d7d38fbb2a0a985f7114935f4effe7c12a138af1a9aab974f5a38beb7986f9f9e4cdb1ab5563de68d7a99b762338afab30b5ad0aef299e4c677719e317 SHA512 58eec6d77026d58488711d8805334f17474bf30f3cacc10abffbd5bc38c0dbb287a586af9c0fc918f9f98ff124532c95e4d92e0850117982ca5afe0dbe9dec2c
+DIST ncurses-6.4-20240224.patch.gz.asc 729 BLAKE2B 18ef11d2ed0f94199fe28e732ebf2460dec8a42705ae89fc339e76870c343b849a311d7915cfd042c761465ce5cb4f42acdc9a2bc57312138e4e6f51546fed23 SHA512 b8e096066947aa2a567a6374afe41fb4f96c869eb3fed179a24d1f3a51af24a0bce135a9a0cb2680218224812b1ff2762470c15292d4555bf9f4231571b573d2
+DIST ncurses-6.4-20240302.patch.gz 37371 BLAKE2B 5d4d5af8fc10cab3e7b6b14751406737396fb5c63b361186d5881ed08cf61cffff64df5a326e1114e4b423f575799bcd0b10fa2c29ed61d4c123a373087d185a SHA512 4eaf59d3ded356f21c891e0ca9dd323e869597489da7322f3ea7ade14a01b2b205b7cbdc9d9beb38abe6f76f2a287a1715f3006599dcb4cbe5e7eb6ca1430e3c
+DIST ncurses-6.4-20240302.patch.gz.asc 729 BLAKE2B 6650fcea22bbb9fa619a9796f29ab63c0622f0be27b093ff8e7ae582fb4072ded5797f2f06064f3f1b594d037d8e74a84a156f9f213580da208b1c896be9c911 SHA512 08030171f2eb9208805f55c0da741883472e31b0443ee1e9c2758780e29ee3da3bc88fc91db1015464c473a98e2bc7556080fb20e69a07678320a5116d0c4a33
+DIST ncurses-6.4-20240309.patch.gz 2631 BLAKE2B 4f101f8f263c378b3c76e2da1399b286a71d70a67d0b639a58d914e61a292b99d5d51d27fab16efc26ab6269bc3718ff89db357f351603d9ca931916675cbe9c SHA512 a0c8e90015f933169329796cf247cdee19a7e1a8b263cfdeba1376d4042dc02f33878eaf56860deebfd55888ccbedcf9b76db4adf70ee6fa92ea7c4f823fdb07
+DIST ncurses-6.4-20240309.patch.gz.asc 729 BLAKE2B fd1c4b7c9b208427be6280f2ea899d970250ff8e4251c437e6e6ec0d3f5f9c6539f68bb4735da2d968769660d6f81aa40c922cde97fe26c2b0bf3630fdba3e75 SHA512 d49ecd327d1bbcd566990a43b54e554ac7c73142ff21fa58d3402b2cc2e8eba3b45780835c58c7f9a8e1a596ffb9cef5e669487d6f56b873d03a91e16ba303f8
+DIST ncurses-6.4-20240323.patch.gz 143301 BLAKE2B f51c229985025950ebe0b35e1e9cb17d36c5277aac966a10c77bb6e60831a6a017431b83ca06a07a660ca42066bf2e5792a37dd39c4e32e55423fe4b66333732 SHA512 a8977192912666dee7e6e1ba4766db352691b647feca169d447b484e5975a40429a2390c2a99136c2f96166973433a0a8d569381560e9ab47f161c85da273de5
+DIST ncurses-6.4-20240323.patch.gz.asc 729 BLAKE2B 380eaa8b0f3faa3e2ff21a3847c6f2ba59019adec68391134bb68bdecfd13cb56589ad4ec062dd391ae3d7bd96a306d85e78ef0827300de594723d188272e7c4 SHA512 380675d04ad1db69a039001b109bea6e7ef3f9fa0059ebe8b17ad12d0b59b20dd18b90abedb63f95db2ed6ad770de77aacc85c24d70bb883b1851c72c5dada88
+DIST ncurses-6.4-20240330.patch.gz 63526 BLAKE2B 593823a358017e5f98e897ebd6e1a2f945b0329c51a76b0ea65458751d2486dc51a71c1d0fdfbc1741167c47ed0b8aedc52b1a923c4788f23293d7e7729885c7 SHA512 666c8f7a37bc2b93b9b0ff76f2a5fe412f1d5c0c9260b64a26665e7c3ba74a9f05ae3883a512425d901ab943948509792759297ea85b9642cd02b7b64455326e
+DIST ncurses-6.4-20240330.patch.gz.asc 729 BLAKE2B 159c110254d81b1c83d7cdb3250fce7ac12d1b4773e6c1a4a347bc7a5d96893504b1a7066d6a8997c3db467ba7d3705e043714000142fd2ebac6e9a008a62ae8 SHA512 1a0dcc56e79da6e0d615bd0a6571869e42aa6e31233e6cb01fe85c8816c82858c23e93a47650e1a4fd8cee2461e4900f7b78a4f9aa3149a0aec6cda704f9c163
DIST ncurses-6.4.tar.gz 3612591 BLAKE2B 47fd9c2d27f44fa9942552881a471e5067465dbace40bf68b28998dded0556127a1d8662b96de4de4fd76c1c8b98bdae796036553ab4b05ca9f160839d841ba3 SHA512 1c2efff87a82a57e57b0c60023c87bae93f6718114c8f9dc010d4c21119a2f7576d0225dab5f0a227c2cfc6fb6bdbd62728e407f35fce5bf351bb50cf9e0fd34
DIST ncurses-6.4.tar.gz.sig 438 BLAKE2B e6a78b8d0cbce1577205b49b0260394094632cefd95294813c7e4e51a2908e8599a9f24b3b648e42ba16c015fb9424b2a82236f58aac3bf96f5400a50482e44e SHA512 f2a7859725b4d5d62f68006338d56598ac6b38a1448983108906e192f0ec922be287cc89bcc79c1ae49ebc80c967af3dd077427f35ae579b00d445c882414fed
DIST ncurses-6.4_p20230408-patches.tar.xz 80472 BLAKE2B 0ba8156ebd4f1691fec7bc1b800ef39ce6a4210573c027dd437919cdcd7c995830116da06c69f31c65923845a4d5c88e974673fac38acce5813f7d6cdc646e3e SHA512 32960e2cc4cd9dc60c38b49f46c5ce2c02179479abb66ca29f63cd06475ae8e26299a78b5f06762d114aefbbca3ba6fbebe7093a58106eeaa40cf500d21633a4
DIST ncurses-6.4_p20230527-patches.tar.xz 63080 BLAKE2B 9db4ac28c8936d3a9c6f3ca5cb8a4c92aa79ee4ce49789bcfc9c031a0454bf6f55a0544bc4a3dbb5c243ed9b2d0792afb98622a6a14b11675b7988100a650eb5 SHA512 3eacda173e8a177cd201ca3fef65311ac92e7e5af4039dc8a5792beae7db1d37efd06f5a55c249eebb771d1245995ff3a206a45794936b6b4299151666dbeade
+DIST ncurses-6.4_p20240330-patches.tar.xz 63796 BLAKE2B 3e6618ba0b37268d10a16cf26c2810e55c17ded97079af3753e34f2d12575f979a2e55cfd308abf783e35e39d4a848b89f435b4886d3633007ccb522b8dc2e51 SHA512 1bbf1978f9287f68bf6a8596f06d4d0523564bf3d2f6b3bd9746081a2fa0c76e36862beca62a4157d51cac0df61e456ddb6cacfae10b92344fe80cd752f72c38
diff --git a/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
new file mode 100644
index 000000000000..e4fb6c71f0fe
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.4_p20240330.ebuild
@@ -0,0 +1,478 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
+# provide a configure option for the ABI version.
+
+VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.4_p20240330
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20230107
+ 20230114
+ 20230121
+ 20230128
+ 20230211
+ 20230218
+ 20230225
+ 20230311
+ 20230401
+ 20230408
+ 20230415
+ 20230418
+ 20230423
+ 20230424
+ 20230429
+ 20230506
+ 20230514
+ 20230520
+ 20230527
+ 20230603
+ 20230610
+ 20230615
+ 20230617
+ 20230624
+ 20230625
+ 20230701
+ 20230708
+ 20230715
+ 20230722
+ 20230729
+ 20230805
+ 20230812
+ 20230819
+ 20230826
+ 20230902
+ 20230909
+ 20230917
+ 20230918
+ 20230923
+ 20231001
+ 20231007
+ 20231014
+ 20231016
+ 20231021
+ 20231028
+ 20231104
+ 20231111
+ 20231118
+ 20231121
+ 20231125
+ 20231202
+ 20231209
+ 20231217
+ 20231223
+ 20231230
+ 20240106
+ 20240113
+ 20240120
+ 20240127
+ 20240203
+ 20240210
+ 20240217
+ 20240224
+ 20240302
+ 20240309
+ 20240323
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( patch.sh )
+ else
+ # We use a mirror as well because we've had reports of 403 forbidden for some users.
+ upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+ upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+
+ # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
+ mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
+ # Suffix each with .patch.gz
+ mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
+ mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
+ # Repeat for .patch.gz.asc for verify-sig
+ SRC_URI+=" ${mangled_patches[@]}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
+
+ # For all of the URLs, chuck in invisible-island.net too:
+ SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
+
+ UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
+
+ unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
+ fi
+fi
+
+SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+S="${WORKDIR}/${MY_P}"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="
+ ${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
+"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_prepare with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CXX,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CXX=${BUILD_CXX} \
+ CPP=${BUILD_CPP} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs --without-ada
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ --disable-term-driver
+ --disable-termcap
+ --enable-symlinks
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-06-29 6:18 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-06-29 6:18 UTC (permalink / raw
To: gentoo-commits
commit: 7a8c3fa265d02fa74b8881a4dca3cfeb9d8a938c
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Jun 29 06:17:05 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Jun 29 06:17:18 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7a8c3fa2
sys-libs/ncurses: drop 6.3_p20221203-r2
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 123 ------
sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild | 471 -----------------------
2 files changed, 594 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 78ae728c9622..a28c3a9817b4 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,126 +1,3 @@
-DIST ncurses-6.3-20211026.patch.gz 117363 BLAKE2B 74c6c80271edc3b69d17c891436e48ee0579b3d16dd1bbd42f953be5b6ef07596343abd34f4d508b0cb371c1c0febfec12d65e938739892a617c8b141f599753 SHA512 25a99bc9cb7a18eb8fd16a0f887bae90c2551e0228b077d28f7217e58190f4b19a526350c999922f7394a1b749e834643c1bf5f339248b842717c146a3ec1df4
-DIST ncurses-6.3-20211026.patch.gz.asc 729 BLAKE2B 470aa4aad00d0dfa9924ca3247d720b720563bfe5a3b5c9571acb4c74a7b3fb55adbae6b0aa854eb0e29c56d7949fa1e3b6d959c25681f1b46c23c96a3c0e054 SHA512 276e8a09ee6fddf20be38b9d8a6f93cbafcec51ed17de375b9d2f4f6c34ff546fdbd81083f54aba1a5aaea5c2c691c25754dfca47568c5b70197437420dd2581
-DIST ncurses-6.3-20211030.patch.gz 46304 BLAKE2B 6fa0f5223c97dc045117c208b92e75aad61638585506aeed0fa5cd6b215f67d212fc780e527f1281ae77063edb1ef9b3a3671b00d306fe322c3ca1b34c1d4d81 SHA512 90440af3959a17388999f07a3b40f770c5511bceda6a39d4c56f867dc5ae8494e49cfb700eb79e31422ebfd1b1990f6d7912083c688963139446f1e43e9d08c8
-DIST ncurses-6.3-20211030.patch.gz.asc 729 BLAKE2B af1715038a877ebe10660872bed82d536df410f8987508aca7ffed6d19fcdc95a2f5bd8f527b5a30580b07d7c770fade7bac2cfce3e20315faf472eaeb075d5f SHA512 526ff0ff7030cef711e92150fe0f2be7076bf8fe8c7b5fff9ee709c202e747c921479bf3efc2c3da8df2f0d7926de6b1571d03270e49bf64bc539193b0a3020d
-DIST ncurses-6.3-20211106.patch.gz 3995 BLAKE2B fbacfd6bfbf64b2935d47f648bd74c93136ea8d17b51e218b80a24695b52246ce8ec01704a0636692bae72815c8b93dec8573570dfd126b19645ec90926e818a SHA512 799819ed01967387fdca4755ab44401f0dc90306f6f771c894ce6702c929e2ff87f45d3e1c2e683cc32bb01553f3332c3a7591a00b7a4bdff93da25307379bdc
-DIST ncurses-6.3-20211106.patch.gz.asc 729 BLAKE2B a60360000338be6f19e9769d901b03917a632d2da961523ea81191b44b04430d757ba0dea30a6b02e29b324dffdc447cf1fe729428138e0e71b138d84aed26b4 SHA512 3902c88633078ccfebda4ce67dbf6e4ccf0e8be296a0193d07ccf51b56dd75c34f326f885330c90d81aa0d487aad513eb797c3916aba682a8ed6673b51483c84
-DIST ncurses-6.3-20211113.patch.gz 116573 BLAKE2B 5c0926fa97628e1e15f10f47e3c668d5867c066b03b80ec1be2cada6a48ec02aca81dbf997718fc1d9bbdd36016de62981eb19e875aac4b4c531c90c0a2f1c48 SHA512 2225859cb6770d31cd5d147f1b767c61ad28534542b64e3e22a9630977f2cabcdad11313d533c0c462f53a6e0dc17cd80985ca759d796658775676720e50998a
-DIST ncurses-6.3-20211113.patch.gz.asc 729 BLAKE2B 16e9645ea71db7afa7b3a52831b04920e9d7d960bfef074361ac77264a28b9bd95a6240e1e3e2e96373615f2915a35acf6d3c21b63a6c4130fd35bf3c65dbbe2 SHA512 7d5b8740512b31bc5b6ace1cc9ebbdf36f2092bc88aa3994f757085ac2add814648daa70c18410a4433fb6327115d9b1762eaf93f9d337de3e10a9707f411f1f
-DIST ncurses-6.3-20211115.patch.gz 2259 BLAKE2B bf3ecd64919707bdf25b1db20d99c68d47d122406bcc4884c370d9b13c3df4bd8fd5e913d3f5ac7dcfbec58f4910d2d42176c32d879095c45e2513cc4c933a22 SHA512 7571da910f51152200d2fa76659d1a253ceb7022c00bfa587188c7ad1f6896ed836eafa3e724933fe3c4bfc03aaf6ac1d51102c5db1a3e37f944f3b15d50f9db
-DIST ncurses-6.3-20211115.patch.gz.asc 729 BLAKE2B 8b853439790674b22029d4d71a65b29019bfc1d2109b44cc2d08a08cc396bd5b784ca8169e4a8edc1fc4e9a08611b89c50f9e3a18781aef0b5a56ea20b335117 SHA512 5427ac588426bba6e9b579faa6c1e1b17839fe2e3327dcd76ac187a46792693da327b279eef35c43e39b08f755cf930e7efe03a753d8b8ba326c039408131d60
-DIST ncurses-6.3-20211120.patch.gz 122226 BLAKE2B 390bb1bee13b83d282ce31a26327bf46000d74851f5d2a363e04915ef73ca5ffaf365255d6696b0c4d10fbb1fb124baa07fa0b841f378b018a37ac1a741aa579 SHA512 37eca2eb6478332e095c139eaa0ff740b8bdf82da4a1c0e990010ffaa3385b38a1c6956ff3f1dc182894384d9face8c265d35faa3ffd0a517c404890b51d177e
-DIST ncurses-6.3-20211120.patch.gz.asc 729 BLAKE2B dd03ec2ae80bfb83ebce5b55410914ce3d5015da2933984b04d2e4d6170b42cccf109bbe2312b4d77c83933f9bad9af7f19e8b1ff23f3791b99238c2d0834891 SHA512 5693a92e631718c6f2bc791e994f5e225a70cd6eab9df5b5da2c180b96480e77c0e5485f48653cffdfe267048175523b7dc42414083500310fb87554043dd19c
-DIST ncurses-6.3-20211127.patch.gz 38780 BLAKE2B b9e6e1c065c7aa97809e65a0af2bb398e7d2ed17c95c35bc4320451ad47efd1a292dfb74d2ff53ff12a68c9cabd6464fe7be40e389c35c4f99ebdc66ec7ad77f SHA512 e2971c8606173da0e044630622506fdef4b83e968b2c501c4e1db9b0b4e54cf93d76570fdacf0edeff986d9cdd728471050c9365881092817b54bd83917fdb25
-DIST ncurses-6.3-20211127.patch.gz.asc 729 BLAKE2B 11ccba2a3310a70b228d0df1b088501ba30f159878662791ce3a294b48e0819c6619dff8763590cdfd74d6e2dc24a5897705808e6da64510d49eea7889e3b1a0 SHA512 8949ab4d8e6b124769bac40becf2853bc0f370814fdd013c7b0c638b9008c1628e5b7cc372f95731549a5cb184ac6d80172f985e114d186a30cebd67268dae61
-DIST ncurses-6.3-20211204.patch.gz 29875 BLAKE2B ce2c8ada23ea01d22baa8d68bb34bfebd3913ce8dd787f1a3825eb07c7a8d83dfe4317e755fc2a16469f6936022a2c45155ea5e3aaf9d01a5caaf124cf1eede2 SHA512 30454d917631cfad474191dbb7e1318e5370e829cab4b63470f51e9c13c953975d999a41cb10a35dfabcf038fe666247d32659f597a6e8a8bac572a4fe6b3fd6
-DIST ncurses-6.3-20211204.patch.gz.asc 729 BLAKE2B b6cc88dd5ac8edc1afa60baccb8af84daf00d8806822f04284c78f0ed132f7fcd839f4d39bc62ff58d48bd3fbf504baab9bb9815a4c236f0bbdbcf23798be71e SHA512 5dbbd09311d4f5bcf1697373945db190925c0d7d1e0aa3d65f83608e34a9c407a74df8553581ec5a49d634e94261ba8f5fac26dbe9718177df173fc4e52543e2
-DIST ncurses-6.3-20211211.patch.gz 5277 BLAKE2B be82f85d49e28a25ef8c26dda4355ac111fab68917d157af05289b518a669e7e42a1f6bf65a813bb3d0747e56cd2723ee1dfa28dc02501ae8350ac74e01c1b39 SHA512 c57157bc401190867aad64f4503e438777606786814de32b38e44df6d73733b91b5c5ca4e173035dd5ccfddbdca2814fdad7a1781f6a144adae4d96d2c6e7e78
-DIST ncurses-6.3-20211211.patch.gz.asc 729 BLAKE2B 01ba5f095250a316fdf30f3f15032804db351c5995dda85820e67cacbb62a0d8a750c4bdfbe6deb9654f01ef124a78ef89b9fe41e4b494561ffa5a79f243c72e SHA512 17973f01a765d121597b3cff6fed2feffe5ff895c4589ea08a86134ba3b9913742f740deba9369d2e7aa89aa033c1925b4d49518d188cae57ba83ff5a3668225
-DIST ncurses-6.3-20211219.patch.gz 6874 BLAKE2B a5b98f1a0fc7b31340713f5aa2a0106184e270ac2312851a5a92ff6947d70d86e9af849a3830f5306c17bad58fbda4640b4cc15715b23cb6e2411b7f86ba0282 SHA512 c38b31e133d336fb50936cc176a04fa076c197c6e6fe56beb840002d6ac65c76c4a3d1f2506122b1095d680ce254a886b52c56194f2fe586edf69355d68f2a45
-DIST ncurses-6.3-20211219.patch.gz.asc 729 BLAKE2B 2ff431a67bf8ac671ec330c8ea7c61e6467cf2c7acb7760ebe035b72a05e675b1945e891d55943f1dfe0fed0c29f91731094ae5d198e11af6d9d0a21534282ed SHA512 7d6a3a0e4a51c885fa2ef37c71f089b7493daa57a59cb02188bef64597657fabb7dc20fce1d55bbd4c368987becdc1dcb89cdce14b45576ce7657522046d8b2b
-DIST ncurses-6.3-20211225.patch.gz 205972 BLAKE2B 34ea7243f7f8ecff69e60a90fc1a0a9b9d69b4e87227714d7ae8f603c3b16f82466c96987e7696fbb45005dbaa2c732f85a79b4fc39a61f8555bac661f27ba53 SHA512 1c2c1687233cfc72cf050883bbee60d88ed179e0fa865dd752985e83add68b5278e498b2e9bd2658b00ef7791e04fc456f43e82fcbb8cb4ed46365bff3c336d8
-DIST ncurses-6.3-20211225.patch.gz.asc 729 BLAKE2B efc0b1a5cf93c71912ab6a7232ddc7c50d2369a955992e6e60f8d86e56aee3cf539c82e082951d5b6215bbde835219588619ae95525b08a54486d3c75ffe3658 SHA512 f2bb524f604883858015a23fbeb698db8483afb88012b3271bfa10935fc71845088b7b5c9fcf950ea9fc2aaa0e2baa4147a8d9f4e42902d3be9f424ce01f7ad4
-DIST ncurses-6.3-20220101.patch.gz 11576 BLAKE2B 76b2ff3bb028bd6ebbcfd0f79e20aa5fd06806279c569e2640e9b6de83899913ef8755c37888a65cdce3ee701db2ef704181de6d36417abfc158fe651d5c0e68 SHA512 07dbf0def9d21a6b701f4f3d18a8f82d5115f8e4d826a57bf5914534029c79aad2b539f60ab5b1795886894f490a9f604acddce3a77cdd474d80db5428568b97
-DIST ncurses-6.3-20220101.patch.gz.asc 729 BLAKE2B c86a9999b42fb312c1452f619269bdc5c1293c19cb8adb2436b5670acf706800a951d266f2c1b78caf1ab10608933e99fc49e761eaef1a658b0ed35fc4816ea9 SHA512 1ddbcdef1e7b5a04dbf0a7b371cd775337ca3ac39247f5215e5c6d099d4758367b98c28a6d5568a08bdcdcb7ff29a7ef2936b12b431d9a0e00eaad2cc78976d4
-DIST ncurses-6.3-20220115.patch.gz 294400 BLAKE2B 97293251ae0c6322df5e4663fca4991e5a1978ad63f1d7d015027dfd6e5dc5e1a52d46683199da2efb5f7f18e7b5424ff7702d34d0dba5eb4ba83dbd85039078 SHA512 0e42e298fa22bf2a463870576ac697ae71320eacfd3ee41bc4b41a229f05603cbdf52bd4e7b724de83c41c2587469deb1e2f876a5e6eabe1df1799263f5c1a87
-DIST ncurses-6.3-20220115.patch.gz.asc 729 BLAKE2B d1288c86c4fdd9890dc8654f81e2e8c956412173a03f26f0018234d6bad6fae6043df8f65d1bf1942c8ea8de68f631d6cd6e8741c932277b85fe9735ec9414a7 SHA512 cf3aafd09105362d8c896d3de73a49ed1f19818a78bd2f2a9f1f8ece218dc01159e65793ef4010d5f5a850fa9057f4f2723d745e6fbca7530a4e8c468005bd41
-DIST ncurses-6.3-20220122.patch.gz 106624 BLAKE2B 33d12cec7df1553cd2c4c3e09152f53ef5b8e86a4cf9bb5afadcc92065f93bd0734f761be088f13f150ec9e8e4d7d8159ea22b2c2bf0bec824e25078d2ea9251 SHA512 c585ba9f3c27314cfb9097d8cf9feb1653014d676670f1644cefffb347ef70a7172ca56c20015531c7117eb23909d55815a295850738499e58c4d5306ec5d747
-DIST ncurses-6.3-20220122.patch.gz.asc 729 BLAKE2B fb8f0e236ec7582b1adfa9c7facb959fe1b88ffcee494308dec6fb4ece6e518d1aae3af5c52e0b82f59660e60c3c01dd56037e1b107e25240a12a03f4300f91a SHA512 609c55b3028a89d4ff09774279435bad58d8d0e179042dafe2c61092f32b5edcad2397cdd8a6eeb7ab61322064fd1b24d8b6b960adc6ede0b7254c3b12284fe1
-DIST ncurses-6.3-20220129.patch.gz 117854 BLAKE2B 1dce0288609407e6bc803ffc8f61b0c33f8a1dcf1c6c4303cd4c730741e4f0b68b7fb7e7b79c1a29dc1c7cde7f2e5aa7b615402b13ee3af7a7c28cae1ce804d0 SHA512 3f573b645f67279e0394352456d844d289be89e2ca70d832d24fe945ce2e6b017273eb305171e5a704492ac3d600de05e5e6c1e268a939bea4b5cfd74b292753
-DIST ncurses-6.3-20220129.patch.gz.asc 729 BLAKE2B a6b8fa01d3a5c8c3f4055757ac23a2700e5b8627214f8606f25c82f560f1637ff2db70a872f43a9aa25b64e3efb3c98bb9980b0673a35ca13073c4f9d5063fa4 SHA512 b2906c5d27312df3c6e79ab486753420ab83e9562d1b3d35971b5ed7f6d15a1ad7f8a3b18bafe3e5e8c6ef9b09d32dade373269ebfbbe9ce5d2b417e0848a5d9
-DIST ncurses-6.3-20220205.patch.gz 48085 BLAKE2B 1d1bd94138379e1947941c87c1ef6cb76e1e5dcf49e04985b59f1d111a524976629f94ece79f9ec93a2c773f8dda9bde0b90b1d34ed1ec51a573d4f1587cad86 SHA512 166f3f6687f52c18169d67e5cd7338aee7ec283898c522e964a4d9f59b20a5754d6865e0268c5297ef7c4b7fc34b8607f00129aecb5b7ab616788a0b98f674b2
-DIST ncurses-6.3-20220205.patch.gz.asc 729 BLAKE2B cace085a89847d3d19eab5049c64afb187b1419dd7ea6ac1e9cd8c037aa83897788cbddc3e97ebe15d32f09e1c5156664e5d3af5727edf6ba6b739025582f984 SHA512 c2176c35fe7044ba82869a928c614faec3a894521b3becbe37277ab95cc5615fb1b33b935d6394a4f75dad15015e5203bcb29001f68fa05420289145729638b3
-DIST ncurses-6.3-20220212.patch.gz 41501 BLAKE2B a0257b9a740a14090e46e85b67a59e754018e77d6484b30eec6f5a3fa84dddf329078b94d4425800ee45a85a31a9c47b1ccc25ed32fdc2f433465c3238e3c8e7 SHA512 1f596ad2f806411a2e89ebc8b74e9d44754fcdd3baa0c727fe610121fe64eb27e1c35871545dd7ab743930e1c49c2d96581aed0a0b37d0a33d2ee7c590c0c42e
-DIST ncurses-6.3-20220212.patch.gz.asc 729 BLAKE2B ed7466b3294baeda59fdd56df93583662a257efb3434ff2817d31994cd5218605ccd535e95ce668f741693fec9fcc5f39223dd67884668aee777bfc9eeff55ce SHA512 3394f9c37a0a1d7e19becb023542534c734f15f030ff725ba54ae010417898be2935d6820f7f7f6d76a0abc3663a9a7f4ccf98a9571c03123f4ba8321ea5c9c1
-DIST ncurses-6.3-20220219.patch.gz 6845 BLAKE2B 660191d5561af0ca763ba8377899ae5793a48e73fec27ef5d9ae00e28cb53edbe96c6ee0480bc1de321ec19cbc8c02f7330861811f3a000b603ce6bdd9921070 SHA512 41d9e29f4f673a6c930f8637dbbf7c55f427aad28088f96ddab824b560b462015dcc21a371551a087adb44dde4797abe9cde2ea07e2537e81216b17b330a14e7
-DIST ncurses-6.3-20220219.patch.gz.asc 729 BLAKE2B e216aa89dbe7d7ea0bafa6d91aca090ac316844ec6d1b1d36da8452bc623e3897722f19b3fb1cc89174ad1aa41a6e8fab4d1b761081090c2bbf338fa027a534d SHA512 555f22dfb585e7b93727f20e46fb6fa77cb633bafdfe6ca3cf3bfabd462a4761f23bb341fbb25c1518b8d9652388f23d671e15f7acecd01755c55d5fa48d3e67
-DIST ncurses-6.3-20220226.patch.gz 5429 BLAKE2B fd0b50218992daf8e5228cf77fe72db651bba494d9699d0057e0e676fc01b699ff4d8f0fb9636faac5ea3fc1936d59d27403a5a5e89f6aa3c42f7c101d9dcb35 SHA512 0d77a955c1f24b7ba58d830cf5c256bcf5946f535b29077484e4ce4ae871a0803fc0db70c66d177ad427da797f7ae30b9a08ff56cd6d0b5f37dd3f231bd67b35
-DIST ncurses-6.3-20220226.patch.gz.asc 729 BLAKE2B e1b83208bf9e9ca9558b3e93f824766765159fcf3b5b4c7a4d92415229a8ef653eb1503446cc5fc8088a354e08cf6fbefb5fcc28e995c8c1718dc77b59552267 SHA512 972f65a645490ef425a6f7314f859cbf8d1aefe5ce6b0847adad3a457d8fd5634af64becb6542e477d14bdacc72aca00fef213c3d5b51f68258ebaef876aec86
-DIST ncurses-6.3-20220305.patch.gz 3732 BLAKE2B b756ad0d8831c2f0eff78dabf1b45adec7888dedc846a91a94cef739c10057f87bbbe7984a4758aa82a8c146d7cc9eeb356b7321bf529fd54480fe334e0ec608 SHA512 4ced572ac32afc2676896e79acac9145c7b138dafa8ebe0c29b2355bf65169a68df3be8fd273b7b957931f98f39ab0f20ada6081be5e11045d32f91f055116c6
-DIST ncurses-6.3-20220305.patch.gz.asc 729 BLAKE2B ef22a7429cffe8dcfebdbd6e339684b7a96c437e3d0bc3ba3eb02c4e8a537909f14306a4d7ce2d0f0752e1a02975b11ad04aabf27a6ba0aa99f4f486b1fe4826 SHA512 68a73ba690722ecca38099521fd9396e7c46dfab9c1a090f0cb7d1a18480bf027a6b7a5e3f1b0ab92a7ad29b05df1c9f7d4c197e13b9e916b6fcb0c54a472e4e
-DIST ncurses-6.3-20220312.patch.gz 3659 BLAKE2B 8ec667f1a615b7fdaf7aeef1c14145ce4c90ad75c8acc474d160c61bf85b13a10fbb6c248a2659dba94db50a9db866c002c2ff429a3bdab8124b1d9b28031364 SHA512 1565f364fa694e2b84f73e9d6ad716b18cdde4f18aeb9bcee8d78d59ed9e995968f7ecea7d307e6738943208ed17bcd459b6b30cc85fa0f7e8ff2c64e2a7b385
-DIST ncurses-6.3-20220312.patch.gz.asc 729 BLAKE2B e5b4cd10b313c7d7f61e3251fddc2c85fbd920b2855d8b9ecb585a1d3acbd5b1bb3a1dcf5043bcb807ab9ecb03c9e711e1625a86ae6adcf6f41b37f8b71b0d21 SHA512 ca819f78d6b5b4c9bfd9e536c6e8ec4ccd9d6c3ad3f00e1e85f5e646e2e5d2b30e8c72ffe91f789a9b8f2268b89f4fbc07798b433a202b263673a187c74774c9
-DIST ncurses-6.3-20220319.patch.gz 3975 BLAKE2B eb9a9896704463e64c0b46721322190cdaaf1bf6d30f3a8b4ef2d815a5cba5dc0ca84674404ef720d0d861cf724b265988e187fec94096f6926633da62933829 SHA512 f642180bc13bc26d8befa48145a66d36f064cd5a4c5891e0eb5e9e463cd7a446280040ce04aa8d7bedacb06d060916fc32ca7f6f66010ee6fbf95c4a367e2c1f
-DIST ncurses-6.3-20220319.patch.gz.asc 729 BLAKE2B e6f763a035db48bdfb1bb7c05aa30f91c0e693efebb0f74eebc696a0f5b4acba3655112af6bf9b0d5bb502a5d67dd3416b4f26dc3be5cb775692f1c958aaa911 SHA512 e07dce52dc16d73dcddfcb982b40cb9fb4ff60097e704e9dc56604262cb30eabf2283a4b436e78a8ddf6abca69cc3fef5a2d93d9145658ad4a36022e2b053406
-DIST ncurses-6.3-20220326.patch.gz 4163 BLAKE2B 20f83d6491dfe4c6833c72582dbddc5f69f4356f78251989afc7e689a2f261f477a8db17cea7c084ab798d3ead34dd1204a595e4718255a6c4a3a9735c36b217 SHA512 62210e6bdf5577fea31e2d793d15ba55bf1c89a855e02ebfe82bc918dec3423f70c49756b08a8fbf1a7cd4311ff09a2751f76a4bb7b2924a3eacc96c2ea25634
-DIST ncurses-6.3-20220326.patch.gz.asc 729 BLAKE2B 65254b2f56dd831be92fa8e89359bd52252dc7959a16d99888c372722bf533a7c2cc3b285452af5bc33f0478bb2f143ed74b5f0b57ad9cc74626b4902f0ccdbc SHA512 a60b780f39424b3f712e5fd81fe397b1eaa476026b497c50edd5c6e460eaf320ea9412a0d0ce122bb7bb3cdfe2f473bad5a0bbf923a22cc1bcd04c621aa5c023
-DIST ncurses-6.3-20220402.patch.gz 11483 BLAKE2B 3210094fb4be4d7c2b751ce3d7b4efee71db0c420f0159db846efcd0ae6e85673069b7c39b943346a3b1a1aeda247493aba6bf832eb192fd3729a9585d0c9a66 SHA512 f8ce6ab6ef5df746ecbc6286c5b46ec53ab0f3fed831878f693c8afe49b34f3f2769f2d3078b81799952f7905bf18217069fce7dd52d3126b7e4dc2ae84f5443
-DIST ncurses-6.3-20220402.patch.gz.asc 729 BLAKE2B 0ab44b4bbf10aa0c67dc1022012b1e156c9ce9c57214c5f92e7b3714cdccead69e0a869b9247b799797680f896dd8e86b3a2ca2e9587f5cc11250711ab36006f SHA512 299b5b7c337f95b0621571261b23d3110c963ed0f584f145238049caad52ba325d6982e138545d02041e297cf78f3f1a0f8d08f9162bb7b61885870382df2e06
-DIST ncurses-6.3-20220409.patch.gz 22728 BLAKE2B 7b8514a9fc8b8ddbf5cbf1f6b0cb45895808f6226db726c206ed8490c3abccbf8a8d49e6bcfdcad806414d8aa0d4fce89faac43c60a38ecf71e613ff01f67224 SHA512 1dde730b7fa12efeb2bc7b98012f3e5529630f0aabde2d877046ef85d541dafb5d64488747ddb559f97a3f25d1ec5f716815f9e6c1ce100f4f308bfa86501d20
-DIST ncurses-6.3-20220409.patch.gz.asc 729 BLAKE2B 9d5321cd1990c68ac812691713d941d467dcd2f95c93f2488cf212d4162415b615397546bc397a2907f1b6ae38907dea6f72e3012ecdafa0054a91d59a94ca64 SHA512 8db2631d35ee1d7d07d906fa194e499ed8239acfbfd215e192a2382b1cd998a9ee3d0ad971aab43edb5e91cdbb2a772835a42cf0645b2541c5c7dab9bf4adf74
-DIST ncurses-6.3-20220416.patch.gz 67896 BLAKE2B c95a993f51beb87bb9891bd0eee08729795a583df50c66df8265cdd5c4adbef83b9fc0339c71aa5137408fe10fa15b0ba4028d5539a0ac66df06c0c1d72e8359 SHA512 2686ed16f5103d76c92cfa4943a8f82d8bc414db074c1c7fb73810b49c6d1d0103988611edf36715d5be24891d0bb2c97ceb08dc4111d0900b5dba6fac12af0a
-DIST ncurses-6.3-20220416.patch.gz.asc 729 BLAKE2B 52ab1bfcac4b5d7b3733c399509ba4c0a6b9531c02a05846d39344488ba3a9196326a8126db225845a3ff1ca3fdd609fa1d9264583e7e57e28d2f4e3b58b4389 SHA512 c5a60d2ef9996c02264e6656a966f4be910a3acbee777a4ff2a5131efd156bdf1d32418a39d6e3c07fcbb59c75554d4cc1e7e9f84f5b59f69e7e4c17fafc749f
-DIST ncurses-6.3-20220423.patch.gz 3394 BLAKE2B ac93810f1e826fc82de72a85effe5479576af14fa86e0dd08b8823b6f4652922f79242e9c867b1c864f0049c9e6d9864d6efc9282ab1e734dc316cac05655f4c SHA512 5dc87f70793d8319c5ee2f07c7f9432b1128e05f3aa2841a74deeaf294e46859f4198483dc783bb80e5e98f81f05cfef148df75a5abc5acfa69a9d6ad3abb702
-DIST ncurses-6.3-20220423.patch.gz.asc 729 BLAKE2B 7225d28f7e61ae584183e98d8c93c7d470e96984aea4e462333f115c329a8c187927196447b8368949986d4b8c96086f5839fde5b442936e76ac797685ee109b SHA512 b0eecbdad448f193fb255bec2fa458d3fea972c181891882d8dc1e09cc325ecda38e98f2d410993f768f513f3a48b9be4b36dbb2919d82a778496b8ef2051565
-DIST ncurses-6.3-20220430.patch.gz 8987 BLAKE2B bd9d2b39670718277dd71b22fab41b311ef3732b4c3ccf77c796dafd24f7e0ae3a7a759340fa734425728b32ae6b4719b77862d64155fff906a9be01eda14b69 SHA512 7bab780d96404c7e368363ce8a41d5fa1668df9daed62753112541a1ee1da04ef6f3d8d3c06a7442b704c477bbff1b4544f419e532ec7bbfbddd630f66f138ce
-DIST ncurses-6.3-20220430.patch.gz.asc 729 BLAKE2B 8308cf7483087d516756e8a16dd29e5137efc35bce1cb73454b022302dfb77da92357aa0a716dccd0be83534a92467837d199deb1f7765da57323dd1cf95ed92 SHA512 c022fdae0880d56bee1fcd9076e64619bbdf09737484f89fab4c7c5d2c4b4fad236e42cc30c9557463cfd05a9c1d7b87bf3a5aa2904a79ba5a071463f3ac422d
-DIST ncurses-6.3-20220501.patch.gz 1920 BLAKE2B d4b3b23219d43bbaeb42fbe44034f5f0cfd2c24527ab8690f882f42dbd9855d4686a49734d3b2e5f1c6692847149bd6b62fd9ad9d3dd283156ea39441334fc65 SHA512 43b91e96aa067960aee3c42f65bd0ef91ad78360f30a25cb0637f96ad69d40ccf943c888d982521c6d1851fe4590692ecf6cdb4467757a33e901f53ea2e6eac0
-DIST ncurses-6.3-20220501.patch.gz.asc 729 BLAKE2B d32d3ecb5c6f91943179799eccfd536d7a57739dcac62dd7ae9bbf1b4a0491aa4aff7ae147e9e9353ad37bba89475f0d0a408cfa41b3812a48c42055240f1a6c SHA512 177951901957534f78cd2d71045ff8d9457fee426aea830739ece24d69689605c9f2b99be0fbb6d9ca34d6f5894a7bfb594faa2e7a69a87def44695988548375
-DIST ncurses-6.3-20220507.patch.gz 7625 BLAKE2B a7598b9b5b2f6d871e7eb8b11de39964954222a2837377e656e9d1f83002ef47478bf7776b54fc63a085de265f9be1b60d0b039ec77c5c3eb01107ff9158ecad SHA512 f688c38a809f60734efbf5bd07645faa4716c9b263d5edb284ae9a2f2cde5284b8698dd5a3988f433b969e9d26e74451f5c996ada2d7aa7760177d7f9c104f19
-DIST ncurses-6.3-20220507.patch.gz.asc 729 BLAKE2B 5653edd427ead8dc6540b45860380a8066bb3b8ba3015b0858e57c8696defdd99e6d19aa1a6ec269ddfea7a97630a901c4e29680a847070503d4659f9d533dd0 SHA512 f66ae09c989a229d7a8faf9bef7764de08f9a9cd9ffb8b35bfc7421cc8b942428bfdb8918c6f038d3f5e1697d1cdf49a02218b05175515b4e0bf29ed139c3199
-DIST ncurses-6.3-20220514.patch.gz 3612 BLAKE2B 73b151ba2e7bbac38067035bfb742d26f7d0e745ef176b7de56e00d930da3bf630030acede3fa6c63fbad41819e7b90f14848a1ea0d2a07473228dbd32ef7f4d SHA512 b69ac7b2469d7b97404a0dd5d57f6a06c88e139b0bf69627d8e1b65373b513544dfd1583d2fc95ed40ec131f49c90667b65ca2c513eccf785ddcc3b470b1dc17
-DIST ncurses-6.3-20220514.patch.gz.asc 729 BLAKE2B 6e2acb6ee12785aea5a3d881d6cbbfde0579ea4975d6a2b5a412e1fd8a6fa63df88c20013535e38da7f9fd8b2eddbade80da7a9d80a1e72229d89a042678836a SHA512 3cdd8d9ba80ceb3ac359265a8d8479ed9827c7abaa13562069dc2ed819b933b07a00bbf1a280551d30fc97e8d45bddcf0999d282521541244499873892618b94
-DIST ncurses-6.3-20220521.patch.gz 7405 BLAKE2B 788601d52671421c26fc4a6b4c8a5bcdd807a7d88c6636e24a11c70a32f35a7c50bd6f7166f9cc12e30134c49220070c432b3fa72004eb52e15912528d0d7aaf SHA512 58dd6f51e1d9bdb394cc8e86c8f14b953a0749cbd05ae4b114da482dc5c93878ae6fff6f8993194d9ff94461c6e9e38803418812f38d087729d42dff69c738fb
-DIST ncurses-6.3-20220521.patch.gz.asc 729 BLAKE2B 34daeb98a3cf36a0c6a471e617f07496fa173d1b57158d9052ebf94e11c65c61b26a8c884c83104cd4e9c62abdc0abf44ecc680c19751bec7c1d2bdd40fe4018 SHA512 a6d1a14032fab5de28df2efedcbc065a07d9c7da1eafa0efd380df42b479c7e9e3a73381fe7d1243e5abad82d3d01dad645b7876fcc16e723aea8d2c6542fb75
-DIST ncurses-6.3-20220529.patch.gz 5923 BLAKE2B 88f9b87a426b1384b62234b59b6b4655f6af0a1b0100e17c971e419d2ed1ec3a197b3a44b2b82d6550a62323f71efd0a0774df26bc653a7543f3646d88679470 SHA512 9f8c0b91f98c72e0892e9369e0f95aa56699b27d28d68febf746bac07fab75883461f363cdc6da0bf4c5b340287ba4e4c076b00c89550821990bba059f56d5f4
-DIST ncurses-6.3-20220529.patch.gz.asc 729 BLAKE2B af52d71d2b04b11404d5ff468869b7f633c367d10a9a7f43ca198b98fe255b032af837efafafd13dc8aebbfb5f919b453a7850c7d2dcc8b2f5375bbe3e0ee9e9 SHA512 d7aec9551acde75089a097b848125c5f4501751e58c800e40dd5b7234240c039b10de97ad2a70404f9b178a94ee4a3b8484a94fb6aca4599122c6a527161572e
-DIST ncurses-6.3-20220604.patch.gz 8200 BLAKE2B ee331e4467071d3f6655df009966f18aae2a25dca3d24272cedf54d7ee50cd2600cee71a835c11983b168b1dabe1193731cffcbab2773b650dd768f6dd8840c4 SHA512 2d0e2139ee9a43de6b4a10df5c44bcf1fed9919c3e254b9ca0d16fb37b0858e14cc10acbb0027522b0cb64f058d61b3aad3b8178fb6d634a4da57f30ed505e95
-DIST ncurses-6.3-20220604.patch.gz.asc 729 BLAKE2B b9a9b0d90b6f4a19a9aa9e006b6cf9dad0e927c02605af63c6c67a7025f9090a4b76fbb3e758f11e9a0c2e557ed65851ddbd7c831486c851e1d469d7dd16da8a SHA512 acd57c8b27fce2b04bdadcbf2ff82e34aafcdb72b9b2d3a913abf56467f78ce601c70aae93e4959269656adf5562799ba4d9e4aeb6965f4e57fc37577ffb64bf
-DIST ncurses-6.3-20220612.patch.gz 3474 BLAKE2B 67c4820457291e5f325119220631debef475fdf95d66c283616898cb454b281a73e5dee8404c1730b5ca10bc3521a2243f26dadce8c02f082ce1d0fa30c50189 SHA512 ccf89a98a095c6c498170b831cfeff24d1329d7f5007be82463699595e1c6dc01e0b458d456a5b8bda4e8faceced1a4d8f1c1bca7def54a3c6c6c2a2c43e36c6
-DIST ncurses-6.3-20220612.patch.gz.asc 729 BLAKE2B ba1dedfa9a4e83bc85716cb89507e73f44750f14bbe41fb439f764b71477d1dd4df600b4111f465aa80bf37adbea75359442eee48e70e90b8715d0f13bbe13ed SHA512 c8260b56019a3c44c7708b9b41e043871eb06a6e8847d085acbf0a901c39f025b51b41f6ade8863b3fa2460c66cc52571880420d454168e742479bbf7769c5c4
-DIST ncurses-6.3-20220618.patch.gz 5376 BLAKE2B b4ecfc699c0ad8d5f17f5883aee6a7b700495f8db151e68518ae567fc22afbc738796b99ddcd03c0e0f44036fca459d742a2069e794ab476b1183c970ec4c573 SHA512 1efada728e34ca7d4bf1e73bceea18e2334a27ff09872eadcc63988a9d6e6f1fdc5eab717d114805cc5610ec9b35ca00e54931d6503afd5543d035108c788148
-DIST ncurses-6.3-20220618.patch.gz.asc 729 BLAKE2B 9f3b6f6a077b20baa03bec84db9119061777aaa307613b2e22092c743772cc920a3621ac1b0216285f6ebd74737fc09221b8f8103d69dfbf334c5f53e6428054 SHA512 10efd950619625bc673ea88db1bc22d09ddf92910ba204e8bebd029f48f098ec8a35351f368881fcf890d8862fccc3d31b8ba73d1b32acc71722e777f4a3a3c4
-DIST ncurses-6.3-20220625.patch.gz 9730 BLAKE2B ac99b401c51b71df71dab8075d0ea29016a4b159e24773704598bdede7d91ad051633869a9bb0a42ad701995895f5acb711731c0954573c29bca0c9efd70bdf7 SHA512 dc707393050116c0351b132d4b20e9782e2e9920c31ffa101518714431a7a424b05ad2cc23bfc977ff96d4cb6199ab6e98e4204803370c0d557ee65cf84ef870
-DIST ncurses-6.3-20220625.patch.gz.asc 729 BLAKE2B 67790febe058f9e910ac69472ca91370dccdbdd986665f2f864cce50aa4350f77894b3aec3fd3a080d546a201f17d942e311bbee057ba6979ab7c56e1e2270dd SHA512 c4ed979bc34293ebe6e5b1dab099c8ab5f7d1d6dfdfe877e02b6182756b754706a827ac30a41c163582ca9d79a086df9c9ad6f09a55884dd04752adf37c4064c
-DIST ncurses-6.3-20220703.patch.gz 15771 BLAKE2B 8d0b406aee1b432e4a0cedbd68dd86d30d3116c303b72d7e6e4636e870b05f942ae8d8538a0f9118412350718683cbc014f98d5fc22914a14e2eeae740ad89f8 SHA512 68f4e7822077405ee29470a95aa66d284d2defd0e2ccdca12d58e417999b964657ae4170b54977430d859b840998042efe0f36ca41aab007062c53b409b2d467
-DIST ncurses-6.3-20220703.patch.gz.asc 729 BLAKE2B fb052729d5259ed6a7381566c400060a08af6caf6753cbfe82a6c5c2cfac1eaa82b59b6c533aad5ed06a6d527ef31f7ce46c49365386e1735bb5027f2f00d98f SHA512 ae9b8cc007f3b017a021430181ee92ef0dcbed1603c84b21148d0950b823a0cc50ec3ee2cc97880c24080bf8feb5a6152d104bffe39333466ee98cd07333e66d
-DIST ncurses-6.3-20220709.patch.gz 3567 BLAKE2B 97a8106bb64c3f32ca0984dfdbb8cb0b3e5822e726cd08826989cf09cf13ae0afe97b84b728620aef2bdf40f5ca54fd8e81fa354602cb80e98f73861f081408c SHA512 b35516f07614533c40559e3ce2346e51ed93f5c0f127ef076a96d4aa4bbb717f6456765d37034e8479a981194216cd0cd6c45e266715e46a155eb496653cc56c
-DIST ncurses-6.3-20220709.patch.gz.asc 729 BLAKE2B b2d4aa3c15c315a0f09fff8bb9c74595f28aac242fc8eba4bbff53c2d63fe5ca5e0e1356fb88c31df565ceff08065b2da29a961173a7f86c16ad849ba9212616 SHA512 faec18d2a7cf179e1c11dcd76406a790ae254da543ceb666bef2fa3d6a9d03c11ffec0c45495b40691567337895153ebffd6d7b3b30294d0ee707966b99bfdd3
-DIST ncurses-6.3-20220716.patch.gz 26266 BLAKE2B da5b2e610fd32a50694971ed3cd91d4e919d9ae1c7a7077269e8ffadda2717447eef41ff7c7bee42f5ab2363600a417306f40f8429ffeae318c9888e6dd66c38 SHA512 b591df49a00ac3ab717b01c53f7bae47b9aedf30dfeea549ab5a7bf9d366ad653c6d7d0a610ed70e3f3b3ebb18f7d1867ac95f0fb740aecf0343fe1639898230
-DIST ncurses-6.3-20220716.patch.gz.asc 729 BLAKE2B cb6da7708351abaf08ae815c46a994ff81c9b15e6ba7de3e98fe238b274ccfee4bbc31e5707b0cde0b018eaa8d708ae3d10d006eca81a33ca8480f55faec64bf SHA512 4b9da2b760ebc6d3731dc8e5974128ab88b9a170bc3d609b4656c420cdf3f2da6ae4952a9fb6700e926d6a90080caba6ec439fe79d5a9e33d8add31dc1a0b25f
-DIST ncurses-6.3-20220724.patch.gz 9302 BLAKE2B 4d54e2fb503f946608c8c6dcc53129a61a8d210a1db03a87f12e2acc3d8a423bba792929e1f845ffca2eb5041f27d399b685c697c53f65ddc340d9177675ed08 SHA512 eeb5e82bce1199ea4c968b5e8102ca84f1f9a88d5ea7707caf4b24ca51c76aaea0c721b8fb8c373e9e595e7621e320d63a2ed5f387aec777c119c3b87dbba06a
-DIST ncurses-6.3-20220724.patch.gz.asc 729 BLAKE2B 580e4c14f62defbe21e77936cc7f797c3fe42b78c8a451ebaa9c426c25d770d1ddf66447abdb3c703defb46bd436e4342c649b46999337cf11a80e57ddeae48d SHA512 e6c515dda6a9404247693f5f99efa2ab3297042e44a94da99d4e5d1e1b42c0966a874850c5f3e429e0466ca6ed910879a65f7e22dd5210bb3549f8c5a039e3ca
-DIST ncurses-6.3-20220729.patch.gz 85147 BLAKE2B b094798cc56db06e0d13bbffd073eff080822244039984b339a18cb2337d979b6b75acaf61b1392ad3818e1e5234ea274491b15ac2686064c8ad5ddb6453d885 SHA512 d8a515a46277de407cc7f58523fd99ec8d6cb9688740cad7ea743bd3610b62b5cb0fd4d8570bf1a83f7dd0f8887381aea9e4bdde084637f4cbe58ee206a2db4f
-DIST ncurses-6.3-20220729.patch.gz.asc 729 BLAKE2B 8d04bd485ad53f6c2cd18dd1966ddc76d6f1e6f43f9a30635732a49b249a3162d192159f90540ed8102fada9bc3d204f4209ba1a403bcfd7dacbc08cb93994f4 SHA512 927a97416043ce7be208549b7c4f61bae48328e6c04136c45555f95836f7ab538c2e8b850d0c7dee3e0b279597f1f6621fccda8fac7aef7ddb59d764e3052d60
-DIST ncurses-6.3-20220806.patch.gz 2491 BLAKE2B 7cae7ba5cec0e52a2f24088dc33191eb12ded64eddb753879b1edc49e81276f5d2aa205da851a21e6884d72b70e683a711b13faf69444fe06da03170cbf23653 SHA512 adc1a7e4c106e12cbac9bda467d8ec3d7dccbed2c67ec74faa32cf8cbbf5897e4c041ac02e94ecd8266de46aae9ce4060dceea224265a9c5532160ca9a494151
-DIST ncurses-6.3-20220806.patch.gz.asc 729 BLAKE2B fb8ce4c6bd63e0abd611c90c967efe749140fd811ea9ee91cda63343f1c9545ea8814e606742d00fedda2a461141d2dccec778a0ccece6e0213db1d7b636a0ff SHA512 215efa0da6980ded3f5b4d980cfed6268a6b5c157d4ce76e46cbce3055ac875bcbab5e605d4426e0c221316f5922b9e92b105af08686d4f798f88d400adeff3a
-DIST ncurses-6.3-20220813.patch.gz 11762 BLAKE2B e8a269aef28639deccf5db2fc2e649361dac134210bbba6b4e4e9fbbacae2900aa6cbbe00cead74a1f18ff0f00e2c54be607b17fb1e0cacfc0be95af5761dcf3 SHA512 57f5801bfe19922f67b3d65af60b5b9f3177955f26e08978594cc88681a1a3a465ee754548574b206ca607bd4c04f71cfd1c195ed396ea30d94f56ce580274e2
-DIST ncurses-6.3-20220813.patch.gz.asc 729 BLAKE2B e964291deb463dbce2dace974e2d7d6dffa8656d6b3f1b3f5651e0df8bae0bbb3edfcfdd02ef016bd0d452610bd329230ebc0bf5dd0d747fa88608a4f18ee73f SHA512 ff8e14a50165d0281b4a48d96a211e9c613d95ad20d78e261e1febbb17a9b8415351a38f594ce1c06707fada76b9a15ccbc5ba532cd4074e8a89d6571ade7918
-DIST ncurses-6.3-20220820.patch.gz 32018 BLAKE2B 14a29ee43c4d8df82a9f939ef4e028a482a8695feb89fdf6ec234410e3c1db105a4610f71f04c94acb322ff7d474196e4cb472ea5bbfdb7ce57e57c9a07c9139 SHA512 bdc458134e9c0c50c6e8aeeb44f05292f838d147186f2be5f8c872a43b376a66482ad7dec7aaa8a3facecd2c404ed5309cc744a6173b0570c6bfb0db40385619
-DIST ncurses-6.3-20220820.patch.gz.asc 729 BLAKE2B 93179103d5465b5ddff8513a383099bbf07993a1286a164b69d213c176cc39144fc8afb407fbbb2596d975bd7017b677f75609fe8ddaa3415f46cc73c5bdcbe3 SHA512 5e589d29903a2c6c1e85dfb64d7267e3528d65e49a7c4851318139142524bed4824dd787f980b2fbe8327f0b804ecea1ca94bbb6c7615fee9d993ea6d1568773
-DIST ncurses-6.3-20220827.patch.gz 3794 BLAKE2B 2acc58c118af92413189b01d0a9e4d2d3f211921eadbbb3df775d5b64f387d860ddca58ddd2f6ae4ffc04932a5924d03f20ba945eb89a5a1f91382ed0ef0f65f SHA512 5021d4f1ddfcb9baa05926bf3e6cd00f051f301037b2166a48b178a945052a4b2424efd175759a0dde7d604316269ead8554c4eb0c2c46c11d1fd54fad6801a1
-DIST ncurses-6.3-20220827.patch.gz.asc 729 BLAKE2B 363bfe97448821c0eef29e36213389dc9908f289332001851b72e5f0381f76195663f1423150d74c23bb425a37808094e3fa06a261451f59a49861008cbf0e6f SHA512 7180f24a55e3941c7d82498004efb8ef1e9316318c6c53ea5bc1d2b499c960844ff7fd95e1131fcdf2ee4b94a0e8e54ee3f76934c3d91a87775b4a87347f479e
-DIST ncurses-6.3-20220903.patch.gz 4814 BLAKE2B 668041aef48d9ce37474edc6d70e0725323ccb1586a88bddda8e7f81a7717688041e73909089b6d15abdefaeffe0bb9565245dee4b086f07c783b0d95e8e7dbc SHA512 487dd56afd773eafa38260f8067293d41ed6bb9ff841b4c7528c12969b00151b7a3788b0b306d3997d7fb1e98c05ccb32c56f8c839bcc2d9eb4aa9e3db4bae1e
-DIST ncurses-6.3-20220903.patch.gz.asc 729 BLAKE2B 2f076ce9d390ee02edc0b58ecf3a6881897062e34a5f4c09b503c4b306ee70fb0f08e38518029eae4933508a48bda92716dd4b76159a0aa3d7bbd3835d2695ff SHA512 18cb1a77f67b6fddc9f83366487cb547fe1439e7edcd4fc27632702cd3ffc79622dd1421d32454489d08acec7403a04239b34794e81750b703385189a4534b04
-DIST ncurses-6.3-20220910.patch.gz 120984 BLAKE2B 69ad11c6d31d4bb97737e6ede506bac81cd65cf262c1bf6528d4844e8beb4cb353fa7e390d3817c181fead42b268688f8898e9fabf5f98bbef007355ec4b0b7b SHA512 269c376d494e3a82915436d6fbe1bb69dfe70c0330c6f2a8f6a9e49180a332b7fd8ccda0448db723a50c6f5a250391f05c974bc60a9355d3a94380c7afd4192b
-DIST ncurses-6.3-20220910.patch.gz.asc 729 BLAKE2B 55c87ac9edd67abf2c39823acc37a9c8dce6852344d38b442bc2e4693a44412383c2ea710d3030b079607824877f6a1f5efc50970ccd51086c62ebed23e7ee05 SHA512 887031e5248665c79abbc35f4c1e63cffa3b271359188e266372c624b1ac2ce6bb269823c16ea0f6662e4e4acf592179db8f0030fdd9b03ed531d37d5fb7b44e
-DIST ncurses-6.3-20220917.patch.gz 7833 BLAKE2B 338ddfc2b660cff6248bcb2fc39ef13baf3d622c9f68b47c2da4d94e21a12dec7f6d98f7125a154f1e4dbe612cde9172de9d78851bba1fe4e9106dc1cd9e0a26 SHA512 5b2de00087211b9e599aecbe94870504c4bd312d9f0ab4959e706f784700e6e3095beeb8283ed8df9911f5e841f1004a2ef5184ee2c04762a63d84c47c2f4cfe
-DIST ncurses-6.3-20220917.patch.gz.asc 729 BLAKE2B c952f018cee490635809fa3a4ead27964a639289db16db42768c545e85b56033b01ea45b9251cd14f4d0cff97673566a4c8d04f93a1539392b676baeecc0307c SHA512 57de37e7c0fe70b0c1abdabe77b36a95b2845b423f167dd4d5acf5999a7152d69193f707c41f88d6e4210934c120d8c72a93830c6f2f9cb49832266e02314588
-DIST ncurses-6.3-20220924.patch.gz 112587 BLAKE2B 77711d12d8b38d72c8f218eae8f1452fe5d6f65e00937b663ee99e399f0b2a53d450391b12900470b1670cd83dfaac3c10ecc2e4358617866edc317c6daeb3fd SHA512 99057a0e28fa03aae415761928a4fd158eca7de1fee34531a102901846a94893de9dce2f1ad08885201ec0f54d379c3b4886725e766c27239ac957108c89dcb4
-DIST ncurses-6.3-20220924.patch.gz.asc 729 BLAKE2B 64103419d56b0e3b9ab7d7c0b2c650db18b472f2c656b6939b865f7a93e4f6ef5adbed9e438c21a488c204c0dffc818a9c787558ce04a50c7d1c6384f84889aa SHA512 f4bda8c09b6b701c99ffd3153dd8754496991b7f83c36ee7f49c4c701d081d32adfc9c04fa83e639df7f024479c7ee5b3921f45db9f72e896c48637073eca38b
-DIST ncurses-6.3-20221001.patch.gz 7098 BLAKE2B f5ebeddeeba36ea981910fceee1da21ae69135613138b8cfb595194852719f5e7882b769fda255cf10207ea92667b4b66dd8fe538d770e63ee0fc28a2c29c2d5 SHA512 801145584d37439fa54ada12b55183ac45bab53b007a81573d0ebb572ce4625d3029ca360d013af9e8ea7f9355b2745e7eebdf70ffd27e721bb23ef960c1b4fe
-DIST ncurses-6.3-20221001.patch.gz.asc 729 BLAKE2B 6ed82ee5fdfd8fcef8a2815fceec78a0d17004d0c1ff183794853af2ae49c27a71ed2328a8f476d09474ed26e33dfb3ce846e14814a704fa99d51480a8be96d6 SHA512 268ddb0b3b965cf8fc75d524e7c4adbd4701a599f4fcb249d3b2622f704e821143b11cbb680013552640b4155a36237425381a192b0db3182b817aff4c92239d
-DIST ncurses-6.3-20221008.patch.gz 2634 BLAKE2B b3cfdcd113ae2bf57043d6d46164b5940ccb169e37bee8d248087455d19f0d568aa19b0d3e7502c9b5cf40367cbaf19791b8be9220a4243d2155f284de101102 SHA512 281ea85542e76f9208b33febd93301da0cbb2f6730b2aeacfb804a214b9a6a09f46eab197b4c44910934101f95b77dd8b4a1469f1ba769c5a5d3fbb1c20934f0
-DIST ncurses-6.3-20221008.patch.gz.asc 729 BLAKE2B 0cd4646f0c1970626f2cacb267ea23aadfc0cdc314511921d5416177097f004d7ac9f30fd3ba2ad0360cca95aecbad192852a8492f68448f2030a7ddf37a6058 SHA512 2e1d4fca54c44e9de8f98dd7a438388115785338c413afd6d04dcb9ccddc463bff5dbb3ef248a986a958e0a151f2e3d292c1e773da666b365c2d6e6f3abe724d
-DIST ncurses-6.3-20221015.patch.gz 11135 BLAKE2B 30caf1e12175d5ee968d324a61c53d5fdb173b37754e78b496375e04583a15145587a9683caf55c5eaefcfeb989ac96376f300171df5e83a5d5532507ffbb049 SHA512 6932550e9b0a7257dacaba0d58dce0974f0ec99b21b6646eb2798491d806daf2c51839923bd924e782c9ed59753a94a59c013bf3d44b5aa8875fd51f18c60ac2
-DIST ncurses-6.3-20221015.patch.gz.asc 729 BLAKE2B d9c6b896620bebcfd482780b91289a85f4c17f417b3f1c1de02dccf3a4d49cfad3d3e3655d68a11bb707705c4b41c4301412042f0d261aa6bfb79799c850c615 SHA512 f5e4c69fde071fc0a86c8dc799a28264f9b89fb16b3bdcf7d097161d974622cacb497de70dbe0b4fb51fdc1e11ba9b950427129a5b82ec133674a2c302c5f3b6
-DIST ncurses-6.3-20221023.patch.gz 49192 BLAKE2B 788df519977b62d68fb3da19e8962e94bdd20ce31aca7854beccc5786fd28b87ac3046257a119578eb7f7c115cbe50943db2d606888aee6a7fa28a16600cae2b SHA512 6f511d13e6e61e97400aa4848d3b1660667ee4e6c5d97768f706af75abc200095a07a764e1d6f0f456fbc7a3c3abea79756ead7a8d9c12e654a2ee37dc6a75d2
-DIST ncurses-6.3-20221023.patch.gz.asc 729 BLAKE2B 67627c4d38327483811d3d4399bcbc883a80a9ef2f47760197e862ad55d55f2c90a5b3e9815df177087b135ef3dd8debb5eb4143dbfb5cca648be75cd9914a6d SHA512 a0dc66f49f1db36f066200e4b1b6f91aefc751f9a254305251ccad1eb654aa359e4bfd2de71ff9d75a078fbf3e21fca8adaaddb15165de133bbd37b8deea9613
-DIST ncurses-6.3-20221029.patch.gz 5499 BLAKE2B e76820349aa6f8c19bf40587e220bc04cd3228fe3f726d4db9a6577182bf358276803133abe583e63c65632eb9cddb785b92bc40a88e7affb51dfe972bb1f365 SHA512 9f2bcbbb30992b9a022c35165f63d7fd8a2f7a547886191d28dcb96f502cd87a00348dfa8b94843631a4df4de652be4af854a19fd139530630f2b1f1110f9ce9
-DIST ncurses-6.3-20221029.patch.gz.asc 729 BLAKE2B 08f961d369a41af1b9aba016ac28cb8f69afaa72338b2668fa030a6c2e18b82e3eb144562346b9127f3e73fd108625af0b3566200468101c70a8c77d79452db7 SHA512 7f77cdd7d6f5c43ec10b5877946165d24606d432280107b589dc1862c4352716501c75f05a8be5a638ae9a80aada532ee105305f12d9ce57e972f1cbf1f9bf2a
-DIST ncurses-6.3-20221105.patch.gz 101044 BLAKE2B 80d148a9e24828b474c9dc74fb69442b68552fcbecb314328334e9356281c4e425785b127af07b1c7037dd0e6e3d5988f029637c5850848df98ee938664ff760 SHA512 e1b979b476cce2b6c70bdef5646781f6a930224c575db7abbff692227ae6a057919c6c386c011e6861a906560759e64e2cab72534af3d1ff9cbb97ab2de7d81f
-DIST ncurses-6.3-20221105.patch.gz.asc 729 BLAKE2B 54a9611e3f986e652dc3b0f1e2fd5f552cfd005bc91f80b8ff6492a5f4d07c690202bac59d3165fca2fcee565b1fbf98f81a924afcae60e2d432c043e4e387a8 SHA512 a01bc0170d7e8e340aa958f2de46eff1e1266eedb4a8129b9e7d5aabcc0e542b8c98ee06ba15b861488e588940b2e4fee7ac0bc32c905798067b0eb2dc785e46
-DIST ncurses-6.3-20221112.patch.gz 2879 BLAKE2B f29e9394531de7479f8800f052ba70dce48b70ccb81df2f5e67a95d95d1f763e3442a63a3a2db613e1c25155c01aae2fb0bfb18cd587fe5e1799f2ae5386eef6 SHA512 11480f3607827f07d303295d0ad9de247ef958052729f6a033342183daaa4e310fc4b922d80cbb6e9e29e7c24bb33956a15b3b1ba58c1308f1ef6c33fdb59a37
-DIST ncurses-6.3-20221112.patch.gz.asc 729 BLAKE2B 3a329dfccc227cdfe83ccf3f402d0101b1b652811ac37d57c48b5618944d983c54a5be289004ab4dc0024cba43748054053bce489dff5eec6787dc756be5a60e SHA512 4e2bf7522249ebefaa910b33bb61ae3e520f0c947a5d2e289328476487afef8b11b5d77ea72f21b4178bee2413b5b3982a906dcfab652d0bec0780742ffba350
-DIST ncurses-6.3-20221119.patch.gz 4114 BLAKE2B 3ed898cd2e175e6dc22a25f5c2dc165a04e6ddcea6cca0ab38efa91c0ffd9e0e96d3e3eaa6292a991baabb1fe86183d2187fd6400c2514f000def5f934f1eb0e SHA512 624c63c3fea00646e909402dc88ca5eeab5fa7d0414e35cb055a62655817aee86cb1080e6b95ba47d5566b2f8edaee5610a3577896cffdb0cb838db9d6e6fc73
-DIST ncurses-6.3-20221119.patch.gz.asc 729 BLAKE2B 0e2ae4e2583d5b6bfc6e509511db5d788245c4cc8a0a8884d21707663a466486a9c645c976f88f3d4485162c4de572e0dbb95bcbe34ac8d230af1a9f34f6472c SHA512 84b23b3192fe46dde1d876fca1d2bf2ade847a168440dc7e1e0cc66df137a40d8659299d7797ffdd51dfcbb3a87a5236957d8d40ea5df310d2ed8b55046cdf1d
-DIST ncurses-6.3-20221126.patch.gz 46654 BLAKE2B a216b163a7b7ebf4193e9b18264ddfb4cf90e65210b5b54fe0e7a1bd28b68a37122b0b5c5f9bce61452ed900c4d2b5dbe4498d9dfa70c4dc63522f0a373bc8f9 SHA512 c23d2abbb25d023c1bf9e809d1456920ad9f29f084efe39432d3b1e6b017cdf707c92579a5959b7439a246c075a6a9dc35d2889fe032af70cbbbe33ddb6c04d4
-DIST ncurses-6.3-20221126.patch.gz.asc 729 BLAKE2B 2fe9972b35d9ab865a7cc3f1b1273777ce039ffac8377cbcbe745c8172bb9ae92b62dd355ce2e8194dc10fc1c87a97b72831248bd1193191f4ccb0458f91449b SHA512 e3f7169915d761bbd9a400dc3dd41b7dc7519cecb3962a43a75888aead57c52d27a9de88a8b68d704a4baaf2e362db56a5d52e19b249b7f782cd35ce1806fc9e
-DIST ncurses-6.3-20221203.patch.gz 42388 BLAKE2B 183adbb378793faef9b7e1aafe0a1ac3ce14f81e7bfb393f22ad8a748cbdec6dea586847c9dadd84e709bcdf882728f9c6ff6adc6b0519698d7ed8c7c311b908 SHA512 c5c066abaeb153eaabcc09228e715dc97a7041c72cbad097c37fa5ee5c1a8856ae6b9ee7973deb66aeeccd6e8ed1e7d9ece781dd79e2e75985a59c32861b1629
-DIST ncurses-6.3-20221203.patch.gz.asc 729 BLAKE2B a663141e389946fb6967c61c0b6b8fbafdb98f6ff2513bf382a5210e8d403b4bb5c277d1b102c893c1f33d98805cf5f0da0012c68dbabbb516364ba793975930 SHA512 70b8ef161d2d98a752fa37d3854954aea13b909830b8da9d54ed79aa3148570651b4b30d2baef1e5c4e2f47e9287e758187443508cf359f0f8392f3edcfd9d09
-DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
-DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
-DIST ncurses-6.3_p20221203-patches.tar.xz 66988 BLAKE2B ea01eee64b0468fbd5b1a540103f88deff1669533d7b5187440a07ef969249fa664cf770ea8b0cce14b8d93fef9c4fc783c26df13699e205abebacb278d61766 SHA512 2cdadfbd9aed0f33a58150ba71a1a79a23f1590f82dc57a79fe7892bf9a1d86d4604d4c5224f11fdc7c133bcc8d8b60b075e1a493e8cb63743259f0b8d2b66f4
DIST ncurses-6.4-20230107.patch.gz 196232 BLAKE2B 8751142f825a4b79413986e45bc160d49cc9ccef23ae542c59a74435e251de82bdc8f450df14db0867b8679b5ecb81f0fb9abda662a82fb033a7eb5e079ee308 SHA512 970670d8eee50d44b8c7f29daf4c6a575beff3b4fafe12fff786cbd7ac03edeb1e7dae99c8064de99c166e9b3d7811f035ecf75c0eaffb382127cc9df5388d9b
DIST ncurses-6.4-20230107.patch.gz.asc 729 BLAKE2B 483156747c88de46d131cf1f4e460972f95f689baaec0fb4c7c9966bec6e53d41285261761af17cbd8a9543108095587e598e3fe2fe21d76dc4fedde85a3eb0a SHA512 e14d0a27dae59e95f503bf1a569b0cc3115755043eb0cb4fa481e90bf24d097fae675e08c1247c0746fbb5c03c363dc88e6a60c0e9d6abb278df4e8d581749b1
DIST ncurses-6.4-20230114.patch.gz 179019 BLAKE2B 8e7290f41133177275249c084c93a5fe6cb1dcd75e4deea0e44dbdd79774a364705bcd20b30b735996e19e861b5cde2216b5ce7c8d89066095d7c06ce38e5454 SHA512 202c02b09bf21d5c8341fc0e8a30a2c906f0e260a4d536f1332f978ebbe4d93250b832c6449a81ffdc9e030802f064237f39fd0f473e75e61cc77e15232c9a01
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
deleted file mode 100644
index c03553c06924..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
+++ /dev/null
@@ -1,471 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.3_p20221203
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
- 20220827
- 20220903
- 20220910
- 20220917
- 20220924
- 20221001
- 20221008
- 20221015
- 20221023
- 20221029
- 20221105
- 20221112
- 20221119
- 20221126
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( patch.sh )
- else
- # We use a mirror as well because we've had reports of 403 forbidden for some users.
- upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
- upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
-
- # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
- mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
- # Suffix each with .patch.gz
- mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
- mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
- # Repeat for .patch.gz.asc for verify-sig
- SRC_URI+=" ${mangled_patches[@]}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
-
- # For all of the URLs, chuck in invisible-island.net too:
- SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
-
- UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
-
- unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
- fi
-
- SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- # https://lists.gnu.org/archive/html/bug-ncurses/2022-09/msg00024.html
- export EGREP="grep -E"
- export FGREP="grep -F"
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-term-driver
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-06-25 19:17 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-06-25 19:17 UTC (permalink / raw
To: gentoo-commits
commit: 163fcba5384cc86775b15cdae0621dcdec79ecf4
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Jun 25 19:13:03 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Jun 25 19:17:01 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=163fcba5
sys-libs/ncurses: drop kernel_Winnt cruft
Support is already gone.
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild | 4 +---
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.4_p20230527.ebuild | 4 +---
3 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
index 49ffaefaa688..c03553c06924 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
@@ -288,9 +288,7 @@ do_configure() {
# The configure script uses ldd to parse the linked output which
# is flaky for cross-compiling/multilib/ldd versions/etc...
$(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
+ --disable-term-driver
--disable-termcap
--enable-symlinks
--with-manpage-format=normal
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index 0d8e53d2c0e1..1ddd33c22cfd 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -237,7 +237,7 @@ do_configure() {
$(use_with gpm gpm libgpm.so.1)
# Required for building on mingw-w64, and possibly other windows
# platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
+ --disable-term-driver
--disable-termcap
--enable-symlinks
--with-manpage-format=normal
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild
index 460f89a85065..96f95fd80cda 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild
@@ -248,9 +248,7 @@ do_configure() {
# The configure script uses ldd to parse the linked output which
# is flaky for cross-compiling/multilib/ldd versions/etc...
$(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
+ --disable-term-driver
--disable-termcap
--enable-symlinks
--with-manpage-format=normal
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-06-02 18:39 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-06-02 18:39 UTC (permalink / raw
To: gentoo-commits
commit: aeada12dd9d9c0008a73a59fd37578abf3fc1f6a
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Jun 2 18:06:23 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Jun 2 18:39:05 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=aeada12d
sys-libs/ncurses: optimise SRC_URI generation
Thanks to radhermit's new tooling.
Before:
```
sys-libs/ncurses-6.4_p20230401::.: 33.232636ms
sys-libs/ncurses-6.4_p20230527::.: 55.257908ms
sys-libs/ncurses-6.3_p20221203-r2::.: 137.523679ms
```
After:
```
sys-libs/ncurses-6.4_p20230401::.: 9.66169ms
sys-libs/ncurses-6.4_p20230527::.: 10.019753ms
sys-libs/ncurses-6.3_p20221203-r2::.: 11.878338ms
```
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild | 52 +++++++++++-------------
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 52 +++++++++++-------------
sys-libs/ncurses/ncurses-6.4_p20230527.ebuild | 52 +++++++++++-------------
3 files changed, 72 insertions(+), 84 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
index fd7f1fc9cb67..49ffaefaa688 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
@@ -105,36 +105,32 @@ if [[ ${PV} == *_p* ]] ; then
)
if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
# If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ UPSTREAM_PATCHES+=( patch.sh )
else
- patch_url=
- my_patch_index=
-
- # We keep a bunch of mirrors here as we've had reports of invisible*.net
- # being 403 forbidden for some users.
- urls=(
- "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
- )
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- for url in "${urls[@]}" ; do
- patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- unset urls
+ # We use a mirror as well because we've had reports of 403 forbidden for some users.
+ upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+ upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+
+ # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
+ mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
+ # Suffix each with .patch.gz
+ mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
+ mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
+ # Repeat for .patch.gz.asc for verify-sig
+ SRC_URI+=" ${mangled_patches[@]}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
+
+ # For all of the URLs, chuck in invisible-island.net too:
+ SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
+
+ UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
+
+ unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
fi
SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
@@ -159,7 +155,7 @@ BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
S="${WORKDIR}/${MY_P}"
PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
+ "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
# When rebasing Gentoo's patchset, please use git from a clean
# src_prepare with upstream patches already applied. git am --reject
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index d5ee5d28cc97..0d8e53d2c0e1 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -54,36 +54,32 @@ if [[ ${PV} == *_p* ]] ; then
)
if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
# If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ UPSTREAM_PATCHES+=( patch.sh )
else
- patch_url=
- my_patch_index=
-
- # We keep a bunch of mirrors here as we've had reports of invisible*.net
- # being 403 forbidden for some users.
- urls=(
- "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
- )
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- for url in "${urls[@]}" ; do
- patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- unset urls
+ # We use a mirror as well because we've had reports of 403 forbidden for some users.
+ upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+ upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+
+ # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
+ mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
+ # Suffix each with .patch.gz
+ mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
+ mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
+ # Repeat for .patch.gz.asc for verify-sig
+ SRC_URI+=" ${mangled_patches[@]}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
+
+ # For all of the URLs, chuck in invisible-island.net too:
+ SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
+
+ UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
+
+ unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
fi
fi
@@ -110,7 +106,7 @@ BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
S="${WORKDIR}/${MY_P}"
PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
+ "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
# When rebasing Gentoo's patchset, please use git from a clean
# src_prepare with upstream patches already applied. git am --reject
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild
index 7f0aa8fa0754..460f89a85065 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230527.ebuild
@@ -67,36 +67,32 @@ if [[ ${PV} == *_p* ]] ; then
)
if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"
# If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ UPSTREAM_PATCHES+=( patch.sh )
else
- patch_url=
- my_patch_index=
-
- # We keep a bunch of mirrors here as we've had reports of invisible*.net
- # being 403 forbidden for some users.
- urls=(
- "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
- )
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- for url in "${urls[@]}" ; do
- patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- unset urls
+ # We use a mirror as well because we've had reports of 403 forbidden for some users.
+ upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+ upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"
+
+ # Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
+ mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
+ # Suffix each with .patch.gz
+ mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
+ mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
+ # Repeat for .patch.gz.asc for verify-sig
+ SRC_URI+=" ${mangled_patches[@]}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
+
+ # For all of the URLs, chuck in invisible-island.net too:
+ SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
+ SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
+
+ UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
+
+ unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
fi
fi
@@ -123,7 +119,7 @@ BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
S="${WORKDIR}/${MY_P}"
PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
+ "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
# When rebasing Gentoo's patchset, please use git from a clean
# src_prepare with upstream patches already applied. git am --reject
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-06-02 0:33 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-06-02 0:33 UTC (permalink / raw
To: gentoo-commits
commit: 765cf801b251b0dbecaaf90d070cca1c3d2b6962
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Jun 2 00:33:24 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Jun 2 00:33:24 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=765cf801
sys-libs/ncurses: drop 6.4, 6.4_p20230424, 6.4_p20230506
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 3 -
sys-libs/ncurses/ncurses-6.4.ebuild | 417 -------------------------
sys-libs/ncurses/ncurses-6.4_p20230424.ebuild | 429 -------------------------
sys-libs/ncurses/ncurses-6.4_p20230506.ebuild | 434 --------------------------
4 files changed, 1283 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 3c6f33956701..78ae728c9622 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -159,10 +159,7 @@ DIST ncurses-6.4-20230520.patch.gz 3090 BLAKE2B 93e376bc6250509c1a83e799efc2d476
DIST ncurses-6.4-20230520.patch.gz.asc 729 BLAKE2B 08db3a1a8152c4cc29fcc11b24ec3d1a6d3c425eed9a54f33bc370b86f26a13a9cdd273652c448e6e4dd179f5ca41ae653f7ef44902a10eaa18828e2be3a6247 SHA512 7bf2aa9442bc5041ce316af7edc2ff5c5da2ab1bf941c26c6592c8785dc0e47539da3bc2c1e570daafb6a293812f55b8b3b327f90ff9908984eba37e89d5eb7d
DIST ncurses-6.4-20230527.patch.gz 9787 BLAKE2B 951a53b87056f2b3b530f03d0bab5a06ecf6bae0bf2fb580af8c0d96ae169e4813ed2063bf1696fd0fcc1cb0f7da03348904818de7ce454cbcb9a42bb939b6b8 SHA512 f600d7bdbde1f0752d3d530ceb98e9ba51a246a3bd898cc0d0d65bb8b51dab68fa5668789f5f86473c28eb890ec62cecf8e4dc901ac96fccf162c1a5f161f897
DIST ncurses-6.4-20230527.patch.gz.asc 729 BLAKE2B 472421bd7c9093a293e99ec0f343ed471a77e7aa7f705cd99bb61f907c7059b134158c176fb232c542842ba042a1a88ca8e192df81d2d760a70f26a4d76ae624 SHA512 74a0ae5123b339c00f786d4d15a6c100d5d323731b7534e495dd396c9fd03b7ebc61d3fdf6eb71f2fa106160e15da5d093af6e4d53b4a6cfc53c436045a5a614
-DIST ncurses-6.4-patches.tar.xz 63720 BLAKE2B 6b767f65a9c7e8f9fdebaa2623e3770872e710fa103d11e48509e5315ebf5ad1a37519b1b40c5138e631693fb2e2e30ea5eef11002698a341a623a85c5b0b4fc SHA512 5094f6cb8fa54d9df0802173f1e0ff2ad40fc3d4bd298c0742479f72ba4f9afee0ccf9f0a4eb068b0a5552523abf7b212861b61abbde6f69ff22d62dd686daa9
DIST ncurses-6.4.tar.gz 3612591 BLAKE2B 47fd9c2d27f44fa9942552881a471e5067465dbace40bf68b28998dded0556127a1d8662b96de4de4fd76c1c8b98bdae796036553ab4b05ca9f160839d841ba3 SHA512 1c2efff87a82a57e57b0c60023c87bae93f6718114c8f9dc010d4c21119a2f7576d0225dab5f0a227c2cfc6fb6bdbd62728e407f35fce5bf351bb50cf9e0fd34
DIST ncurses-6.4.tar.gz.sig 438 BLAKE2B e6a78b8d0cbce1577205b49b0260394094632cefd95294813c7e4e51a2908e8599a9f24b3b648e42ba16c015fb9424b2a82236f58aac3bf96f5400a50482e44e SHA512 f2a7859725b4d5d62f68006338d56598ac6b38a1448983108906e192f0ec922be287cc89bcc79c1ae49ebc80c967af3dd077427f35ae579b00d445c882414fed
DIST ncurses-6.4_p20230408-patches.tar.xz 80472 BLAKE2B 0ba8156ebd4f1691fec7bc1b800ef39ce6a4210573c027dd437919cdcd7c995830116da06c69f31c65923845a4d5c88e974673fac38acce5813f7d6cdc646e3e SHA512 32960e2cc4cd9dc60c38b49f46c5ce2c02179479abb66ca29f63cd06475ae8e26299a78b5f06762d114aefbbca3ba6fbebe7093a58106eeaa40cf500d21633a4
-DIST ncurses-6.4_p20230424-patches.tar.xz 63080 BLAKE2B 3924b22d60d995766987a217b960b4c719a51f7334c9be80d19c0df4615e1f9c657507e77124cc8f5663249cbd480cac6570fdd49362a12e2fb69fcae8c800e8 SHA512 188b4da6d75cd15397977a07789ee6365262bd392fb7b2714e870834b2195d29fc5aadff6664a9a13d8d73e88aa43f502ae97c7b1f980231ce392a05ed4d3eb7
-DIST ncurses-6.4_p20230506-patches.tar.xz 63132 BLAKE2B 5067aa5f82ff9c9ffad0cc9effc1990095b808a1c76ce1ad640aef39f896ed3f1a81caf000cbdb355a2f213133d877bad949ca14debeb88b2d0d3c3a8331e605 SHA512 cef883f486cf5b2abecfd951e408aeeb76257b53abea465b33b0e9f4b9bd9b7dc001f4aa48dcbd429143ed14b784bd841bcd5bc722d528d21521d5630dcf8315
DIST ncurses-6.4_p20230527-patches.tar.xz 63080 BLAKE2B 9db4ac28c8936d3a9c6f3ca5cb8a4c92aa79ee4ce49789bcfc9c031a0454bf6f55a0544bc4a3dbb5c243ed9b2d0792afb98622a6a14b11675b7988100a650eb5 SHA512 3eacda173e8a177cd201ca3fef65311ac92e7e5af4039dc8a5792beae7db1d37efd06f5a55c249eebb771d1245995ff3a206a45794936b6b4299151666dbeade
diff --git a/sys-libs/ncurses/ncurses-6.4.ebuild b/sys-libs/ncurses/ncurses-6.4.ebuild
deleted file mode 100644
index ab876df76ad1..000000000000
--- a/sys-libs/ncurses/ncurses-6.4.ebuild
+++ /dev/null
@@ -1,417 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.4
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- #20221126
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- # We keep a bunch of mirrors here as we've had reports of invisible*.net
- # being 403 forbidden for some users.
- urls=(
- "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
- )
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- for url in "${urls[@]}" ; do
- patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- unset urls
- fi
-fi
-
-SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="
- ${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
-"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs --without-ada
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild
deleted file mode 100644
index 976e3e417487..000000000000
--- a/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild
+++ /dev/null
@@ -1,429 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.4_p20230424
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20230107
- 20230114
- 20230121
- 20230128
- 20230211
- 20230218
- 20230225
- 20230311
- 20230401
- 20230408
- 20230415
- 20230418
- 20230423
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- # We keep a bunch of mirrors here as we've had reports of invisible*.net
- # being 403 forbidden for some users.
- urls=(
- "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
- )
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- for url in "${urls[@]}" ; do
- patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- unset urls
- fi
-fi
-
-SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="
- ${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
-"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs --without-ada
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
deleted file mode 100644
index ae0083d5601c..000000000000
--- a/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
+++ /dev/null
@@ -1,434 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
-# provide a configure option for the ABI version.
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.4_p20230506
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20230107
- 20230114
- 20230121
- 20230128
- 20230211
- 20230218
- 20230225
- 20230311
- 20230401
- 20230408
- 20230415
- 20230418
- 20230423
- 20230424
- 20230429
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- # We keep a bunch of mirrors here as we've had reports of invisible*.net
- # being 403 forbidden for some users.
- urls=(
- "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
- )
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- for url in "${urls[@]}" ; do
- patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- unset urls
- fi
-fi
-
-SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="
- ${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
-"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs --without-ada
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-29 18:21 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-29 18:21 UTC (permalink / raw
To: gentoo-commits
commit: d84392786f7318e2bb5065790080da601028086c
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat May 27 16:58:42 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon May 29 18:19:15 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d8439278
sys-libs/ncurses: drop dead prefix targets
The removal was already done, so this is just cleanup afterwards.
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild | 5 -----
sys-libs/ncurses/ncurses-6.4.ebuild | 5 -----
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 5 -----
sys-libs/ncurses/ncurses-6.4_p20230424.ebuild | 5 -----
sys-libs/ncurses/ncurses-6.4_p20230506.ebuild | 5 -----
5 files changed, 25 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
index 2969b97a6196..fd7f1fc9cb67 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
@@ -198,11 +198,6 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
- # bug #852665
- if [[ ${CHOST} == *-cygwin* ]]; then
- BUILD_CPPFLAGS+=" -DBUILDING_NCURSES"
- fi
-
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
# binaries in /usr/bin support both wide and narrow.
diff --git a/sys-libs/ncurses/ncurses-6.4.ebuild b/sys-libs/ncurses/ncurses-6.4.ebuild
index 61e0fe9a3936..ab876df76ad1 100644
--- a/sys-libs/ncurses/ncurses-6.4.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4.ebuild
@@ -142,11 +142,6 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
- # bug #852665
- if [[ ${CHOST} == *-cygwin* ]]; then
- BUILD_CPPFLAGS+=" -DBUILDING_NCURSES"
- fi
-
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
# binaries in /usr/bin support both wide and narrow.
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index d3e6829f1779..d5ee5d28cc97 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -149,11 +149,6 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
- # bug #852665
- if [[ ${CHOST} == *-cygwin* ]]; then
- BUILD_CPPFLAGS+=" -DBUILDING_NCURSES"
- fi
-
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
# binaries in /usr/bin support both wide and narrow.
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild
index ac297470aec9..976e3e417487 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild
@@ -154,11 +154,6 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
- # bug #852665
- if [[ ${CHOST} == *-cygwin* ]]; then
- BUILD_CPPFLAGS+=" -DBUILDING_NCURSES"
- fi
-
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
# binaries in /usr/bin support both wide and narrow.
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
index 703a32897e0a..ae0083d5601c 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
@@ -159,11 +159,6 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
- # bug #852665
- if [[ ${CHOST} == *-cygwin* ]]; then
- BUILD_CPPFLAGS+=" -DBUILDING_NCURSES"
- fi
-
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
# binaries in /usr/bin support both wide and narrow.
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-21 2:22 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-21 2:22 UTC (permalink / raw
To: gentoo-commits
commit: e8a8f34562f4bf9ba7081c535c7f3466ae143d22
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun May 21 02:21:52 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun May 21 02:21:52 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e8a8f345
sys-libs/ncurses: build native tools w/ --without-ada
There's no need for it when building the native tools just for tinfo etc for a
'cross' build. This doesn't affect the installed files.
Closes: https://bugs.gentoo.org/823776
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.4_p20230424.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.4_p20230506.ebuild | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.4.ebuild b/sys-libs/ncurses/ncurses-6.4.ebuild
index 26715df453d0..5c0e899fefad 100644
--- a/sys-libs/ncurses/ncurses-6.4.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4.ebuild
@@ -186,7 +186,7 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
+ do_configure cross --without-shared --with-normal --with-progs --without-ada
fi
multilib-minimal_src_configure
}
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index fef75a86ebec..1bf84eb8b711 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -193,7 +193,7 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
+ do_configure cross --without-shared --with-normal --with-progs --without-ada
fi
multilib-minimal_src_configure
}
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild
index a400ea23f18c..d222c10a6475 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230424.ebuild
@@ -198,7 +198,7 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
+ do_configure cross --without-shared --with-normal --with-progs --without-ada
fi
multilib-minimal_src_configure
}
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
index b1551515ea6a..2252727d553a 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
@@ -203,7 +203,7 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
+ do_configure cross --without-shared --with-normal --with-progs --without-ada
fi
multilib-minimal_src_configure
}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-13 7:15 Arthur Zamarin
0 siblings, 0 replies; 213+ messages in thread
From: Arthur Zamarin @ 2023-05-13 7:15 UTC (permalink / raw
To: gentoo-commits
commit: d26242c407a31e616a4321d40051b0a0e7bc8f82
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Sat May 13 07:15:05 2023 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Sat May 13 07:15:05 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d26242c4
sys-libs/ncurses: Stabilize 6.4_p20230401 sparc, #906233
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index 406bbdb99426..fef75a86ebec 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -92,7 +92,7 @@ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${P
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-13 3:54 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-13 3:54 UTC (permalink / raw
To: gentoo-commits
commit: f68e17ee8bdd8f11d422ee4a2b51d2ab20003a36
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat May 13 03:53:55 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat May 13 03:53:55 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f68e17ee
sys-libs/ncurses: Stabilize 6.4_p20230401 hppa, #906233
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index 4b62ebb58c22..406bbdb99426 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -92,7 +92,7 @@ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${P
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-13 3:54 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-13 3:54 UTC (permalink / raw
To: gentoo-commits
commit: 36f0409e45639f27811b3de4231ff129681e8ccd
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat May 13 03:53:54 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat May 13 03:53:54 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=36f0409e
sys-libs/ncurses: Stabilize 6.4_p20230401 amd64, #906233
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index d7d2c3d578b9..4b62ebb58c22 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -92,7 +92,7 @@ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${P
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-13 3:34 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-13 3:34 UTC (permalink / raw
To: gentoo-commits
commit: 538223af1c96d16e5a7af7a6834643955823d191
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat May 13 03:34:42 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat May 13 03:34:42 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=538223af
sys-libs/ncurses: Stabilize 6.4_p20230401 x86, #906233
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index 106cc4a9d359..d7d2c3d578b9 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -92,7 +92,7 @@ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${P
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-13 3:17 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-13 3:17 UTC (permalink / raw
To: gentoo-commits
commit: e6c5ddc9898933e4a04e568a90ca0cf3ea190d0b
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat May 13 03:17:12 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat May 13 03:17:12 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e6c5ddc9
sys-libs/ncurses: Stabilize 6.4_p20230401 arm, #906233
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index c626cca1d5e1..106cc4a9d359 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -92,7 +92,7 @@ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${P
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-13 3:17 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-13 3:17 UTC (permalink / raw
To: gentoo-commits
commit: 123454f58231ca91bc927ebfaa661a7e67a3c700
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat May 13 03:17:09 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat May 13 03:17:09 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=123454f5
sys-libs/ncurses: Stabilize 6.4_p20230401 ppc, #906233
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index efccb7cbbe6d..976320ab45f1 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -92,7 +92,7 @@ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${P
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-13 3:17 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-13 3:17 UTC (permalink / raw
To: gentoo-commits
commit: 3eec52939907e72d4aeb2ea8772c03b59c58f258
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat May 13 03:17:11 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat May 13 03:17:11 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3eec5293
sys-libs/ncurses: Stabilize 6.4_p20230401 ppc64, #906233
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index 976320ab45f1..c626cca1d5e1 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -92,7 +92,7 @@ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${P
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-13 3:17 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-13 3:17 UTC (permalink / raw
To: gentoo-commits
commit: 98c98abc15a0b9c5be7922ecac092014ae9e10a8
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat May 13 03:17:08 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat May 13 03:17:08 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=98c98abc
sys-libs/ncurses: Stabilize 6.4_p20230401 arm64, #906233
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
index 05d69b73b8b2..efccb7cbbe6d 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -92,7 +92,7 @@ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${P
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-05-13 2:35 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-05-13 2:35 UTC (permalink / raw
To: gentoo-commits
commit: c2e63573574ff74b365b3ac37b9f13000665349b
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat May 13 02:35:12 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat May 13 02:35:12 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c2e63573
sys-libs/ncurses: add note about bumping w/ sys-libs/ncurses-compat
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230506.ebuild | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
index 2a1143b22b5b..b1551515ea6a 100644
--- a/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4_p20230506.ebuild
@@ -3,6 +3,9 @@
EAPI=8
+# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
+# provide a configure option for the ABI version.
+
VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-04-13 7:27 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-04-13 7:27 UTC (permalink / raw
To: gentoo-commits
commit: 684be1b17000d5497a4c2ba6ce4966e1ca728050
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Apr 13 07:25:50 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Apr 13 07:25:50 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=684be1b1
sys-libs/ncurses: add 6.4_p20230401
This lacks the upstream 20230408 patch which might cause issues, so add
this version for easier testing.
Bug: https://bugs.gentoo.org/904263
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.4_p20230401.ebuild | 429 ++++++++++++++++++++++++++
1 file changed, 429 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
new file mode 100644
index 000000000000..e511c7336476
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.4_p20230401.ebuild
@@ -0,0 +1,429 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.4_p20230408
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20230107
+ 20230114
+ 20230121
+ 20230128
+ 20230211
+ 20230218
+ 20230225
+ 20230311
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ # We keep a bunch of mirrors here as we've had reports of invisible*.net
+ # being 403 forbidden for some users.
+ urls=(
+ "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
+ )
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ for url in "${urls[@]}" ; do
+ patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ unset urls
+ fi
+fi
+
+SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="
+ ${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
+"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_prepare with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CXX,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # bug #852665
+ if [[ ${CHOST} == *-cygwin* ]]; then
+ BUILD_CPPFLAGS+=" -DBUILDING_NCURSES"
+ fi
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CXX=${BUILD_CXX} \
+ CPP=${BUILD_CPP} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-04-13 1:49 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-04-13 1:49 UTC (permalink / raw
To: gentoo-commits
commit: c46795fb6af168a089d6ba651a41d3aadedcbcd4
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Apr 13 01:34:10 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Apr 13 01:48:34 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c46795fb
sys-libs/ncurses: add 6.4_p20230408
Bug: https://bugs.gentoo.org/904247
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 21 ++
sys-libs/ncurses/ncurses-6.4_p20230408.ebuild | 430 ++++++++++++++++++++++++++
2 files changed, 451 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 833dc709e4bd..c794f1e8426d 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -121,6 +121,27 @@ DIST ncurses-6.3-20221203.patch.gz.asc 729 BLAKE2B a663141e389946fb6967c61c0b6b8
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
DIST ncurses-6.3_p20221203-patches.tar.xz 66988 BLAKE2B ea01eee64b0468fbd5b1a540103f88deff1669533d7b5187440a07ef969249fa664cf770ea8b0cce14b8d93fef9c4fc783c26df13699e205abebacb278d61766 SHA512 2cdadfbd9aed0f33a58150ba71a1a79a23f1590f82dc57a79fe7892bf9a1d86d4604d4c5224f11fdc7c133bcc8d8b60b075e1a493e8cb63743259f0b8d2b66f4
+DIST ncurses-6.4-20230107.patch.gz 196232 BLAKE2B 8751142f825a4b79413986e45bc160d49cc9ccef23ae542c59a74435e251de82bdc8f450df14db0867b8679b5ecb81f0fb9abda662a82fb033a7eb5e079ee308 SHA512 970670d8eee50d44b8c7f29daf4c6a575beff3b4fafe12fff786cbd7ac03edeb1e7dae99c8064de99c166e9b3d7811f035ecf75c0eaffb382127cc9df5388d9b
+DIST ncurses-6.4-20230107.patch.gz.asc 729 BLAKE2B 483156747c88de46d131cf1f4e460972f95f689baaec0fb4c7c9966bec6e53d41285261761af17cbd8a9543108095587e598e3fe2fe21d76dc4fedde85a3eb0a SHA512 e14d0a27dae59e95f503bf1a569b0cc3115755043eb0cb4fa481e90bf24d097fae675e08c1247c0746fbb5c03c363dc88e6a60c0e9d6abb278df4e8d581749b1
+DIST ncurses-6.4-20230114.patch.gz 179019 BLAKE2B 8e7290f41133177275249c084c93a5fe6cb1dcd75e4deea0e44dbdd79774a364705bcd20b30b735996e19e861b5cde2216b5ce7c8d89066095d7c06ce38e5454 SHA512 202c02b09bf21d5c8341fc0e8a30a2c906f0e260a4d536f1332f978ebbe4d93250b832c6449a81ffdc9e030802f064237f39fd0f473e75e61cc77e15232c9a01
+DIST ncurses-6.4-20230114.patch.gz.asc 729 BLAKE2B dbb676160938bf5a65780a446bdffc8521410d216609d38817ea8977ea0f244dc221ec33a0475e05542fba4be7349f0948e9fa32be7fd439e57721b6a6e08fe3 SHA512 bfa1b6856fdf503aa17bac83ba0170009242ac950d46bb8789fb0e0f68c406fed364104565351df70ab58b12bbf8aedd4e587df3bd7ee69a6a0c287f67fd0c3b
+DIST ncurses-6.4-20230121.patch.gz 44888 BLAKE2B 355b2f283b978a2aadee0f4e1bc1694eb8d4ef559014d86b1ef05ab818a8852192b09976336ecd73f2610e87a8a3ccd4f799e6e0585ec4a2a8e85abbbae2f467 SHA512 7bee1b23afff48b5319a60f9e90cfd7593c0a107bcd5606da8e765b4d38904a6f732fe8077ecfac45ee2daceed301026ef3fb67435cae1d94ef5fec01440c100
+DIST ncurses-6.4-20230121.patch.gz.asc 729 BLAKE2B ddd69de4d17066b79ed9c99dfafcd051ebfb32cc31b5ea88fe013b991ca91e3bf4d00fbb36bd73b5d2ff0d4fdf33525b14bbe6ccb5216af5459e276e161a716b SHA512 f0a6eb2c81782c2d2da6d15b82a3167e4209887b868efe2e36708ffba93c987f358828d353a4b211f5fe6c1abce90b42e7d6dd2cb6ad322de78bbe2ceb04e1ad
+DIST ncurses-6.4-20230128.patch.gz 119721 BLAKE2B e91942151653415ba09e384c683a2d13854c6a751fbb4b60ee74245e71207f98d7a89b000e93cc3555f302dba2c5ca55d8313cab2197dc4074251044ef7b4eae SHA512 fffc86e953213ddc9bbe5c6a51bd60725ef75655452d03a53a38bfd5ca318d4801bb9ae4244e7e14ca8c77a9aa6fba298f45a01ae26a964cfc3300268f87c479
+DIST ncurses-6.4-20230128.patch.gz.asc 729 BLAKE2B 0faa8eb037867b99e7ea6f23c99d487426986cf9e5bc5a89179bd1ad4f363c5621d7c81214f4e38eed4ddbce9cd2cb569ff700325585e56ba706c7f1b56cabd6 SHA512 9cc84a4e32b7a67965106e8f414f87a160b632d49a5489880cd4f3f43daa7043d33894b22a16efdef5cd04914cf69019a1abefc8b9234ba2a92d1dc7c46f72fa
+DIST ncurses-6.4-20230211.patch.gz 13004 BLAKE2B 1935bee908c20f065f93100745755177012a49709bca3b14edb0414aa1493dbd6c52313a16ed04b58dff635fb6e853c39e3e3fe2b47ac5662fc274d59976ae94 SHA512 f70ad2605dfe867d8cdcbd6516c759bbf5422bf297d1ee0fb20b2b4262177cb018b7612c735efeccf8794a6fde55e388e4c9ef0bed41e9c467902835c6bf678e
+DIST ncurses-6.4-20230211.patch.gz.asc 729 BLAKE2B 42a64222042021f85a70d88555cdb6854abcc0202fd3580fff0984aee1d6154bb995d6357ed45cbb90ba92c17c32d8fd573ba0c59d37e9add2d7ece68044ac52 SHA512 27930c85a4ff2cb83c54def0fdf8f1765c4d1ca36935b26022bfe48ab6e87f39c6e45b8d1427d448e0a7b2bae864b00811ac9f1f1ab9f97d4c8f4b001dc2cb01
+DIST ncurses-6.4-20230218.patch.gz 146502 BLAKE2B 571cf7f5df5eeef21ab719ea2e941a431751ffd973de11783b96bea1ff6162f9fbbd3c3616d4c63906135cb4a6f16f8ee1a566743760c20bf026c2f378d57ce6 SHA512 7c8cec6437bef737235cf0a684646d3b6bf38c66314c14d5f07ec5dc2ca20e3036ffbd9900bb5c45e48929b1454711de412b77e527a7df643dd4403a5abfc787
+DIST ncurses-6.4-20230218.patch.gz.asc 729 BLAKE2B ca55b37bf6e647c5e39eaba1174c9c9699ffa77fc7ec1b53771586303184cf4b64cf5def844fc87d563a847109d7b00beac17e758a9803350831ebe14d36b0d9 SHA512 5471a2c8389742c0c8b74f1c27e9b97012c5d5eb0256fbd4bb904daab685614fe2506b5a204d958273eb66b56c5ff4b5e5aba8e28f59e2fe0cba392dde59b473
+DIST ncurses-6.4-20230225.patch.gz 68561 BLAKE2B ab80ea189f975e6fc0c2a1dd22898e2d4dde6bf2767ed47000c534430af09948266188cf54a527aabdfa6f4b5df4946c8bc3afdd7869bcccc75429b3e828b48a SHA512 fed222bbdb5d3c472ec7283f5612e12d6b1806c49ca5d1dc7dde68bbf72e8b1fe9c31a4737b6bbcf721d97babc9156a524d127f9e3d6c41547813bef70fb247d
+DIST ncurses-6.4-20230225.patch.gz.asc 729 BLAKE2B f7b4ff7fe78a69ec20c79225cce7bee628476663600129e5eee0c0f1ef2f0783e46485f57a774847851e6e192231610405ff923dcafd68c1dcc3d2ec622f0b78 SHA512 937a4bb33acf0c86b201145f2abe65e5b7defe63c064aeb2b7cb8869494c02a5d50af3f048dd758ea39b828b8cdd0dac54004dc41cd609afcf3de71454195135
+DIST ncurses-6.4-20230311.patch.gz 15262 BLAKE2B b3ca38dc63d64dd59af08b4c642c5b081eb137db6d7590a92f29c55be7148b26032553e1b72b0977394608ac144a12dfa0f919d943d41fd6ff419f8e568c655d SHA512 17662557194e81668dac748bce1240276d48e09df2416934da9660861154137024aee989287e9aac17b884e9707cf1c86c438cbcc583902af8a5ecc5a5e08140
+DIST ncurses-6.4-20230311.patch.gz.asc 729 BLAKE2B c5f513390bae7cbd5cf9d6a6f67c00161cb7c1712ebfa7ee9b27b391dbdb8f9386fc55daaa25b34c55955cc0362191256a2288b85d2d1dd9ff945561a2850449 SHA512 2b0f9ec58e011bb969397018258519b09a5af42ac49b7609677f983c1d69543aaeb052fb762d358b3fcfba7a3d40c01f61f3a680102d10f76958750b531a89d2
+DIST ncurses-6.4-20230401.patch.gz 5172 BLAKE2B bf4a9d9bcecc2fa91191139a4f1aa39aa4f08346986fe14f43b7dc4cbdaed767d198f426c8517024c5d4fe481a45c6d7e0a0b62d35cd72250e08da47edcbe86e SHA512 dd3d89cabec528c95c4b065a32d3496210571b0baaab079c2b381563f374072630aab0ec919c26e10ea476b7aebf1eab45ea25f8b4dfcd8172f44270d03c9cc9
+DIST ncurses-6.4-20230401.patch.gz.asc 729 BLAKE2B 18588b7cc4e3f256a4e9aa9e6221e54b1a29711df01784397b1055d9fea8ae5f1bb544a8acfd660ef1b7d72ccae1ab94b61f38ba19159e4efc7563a79e93fbb3 SHA512 bf9da77a0da1640d883e0a6ac7f807995f3678eaa054255e8591dbe9a2c4cebb43d8d2781b8ddf7c7432a38f63eb72d519445edcc2721a01d7a785964adee8a1
+DIST ncurses-6.4-20230408.patch.gz 15680 BLAKE2B 7d1fa16a79e317be3c2746f7117559a9cc65b7ca20aca86a314591d376db59f8a151d739bfbc502691808f16130b89a9d5b4ee8bcd357a01ef033ac2ad7277d1 SHA512 036d4b08c0d17656c75f89625d5b5a253e70458bc9f2303269b4c72349ad62c719951b9ebd65385d6d8ad4be9e89a36090fa842fbb62713d9b8fa6a359170a88
+DIST ncurses-6.4-20230408.patch.gz.asc 729 BLAKE2B 7648e24297dc66dc4d5f08bf592b2db628a5962b0d6d34c1f0725257c3a04d2430897edd99d741ba837196e9a6f2c138e4826f40f80ea88e9d5dc04a41c11986 SHA512 eabe6e49b94969fbba7bf8de3bef803a8151e6d3bb0e9d1f0d4b11d27c7156be37f623e6785a205b7b8acaef2a2d646099aef8c410a6addb7592a9af2ec930c4
DIST ncurses-6.4-patches.tar.xz 63720 BLAKE2B 6b767f65a9c7e8f9fdebaa2623e3770872e710fa103d11e48509e5315ebf5ad1a37519b1b40c5138e631693fb2e2e30ea5eef11002698a341a623a85c5b0b4fc SHA512 5094f6cb8fa54d9df0802173f1e0ff2ad40fc3d4bd298c0742479f72ba4f9afee0ccf9f0a4eb068b0a5552523abf7b212861b61abbde6f69ff22d62dd686daa9
DIST ncurses-6.4.tar.gz 3612591 BLAKE2B 47fd9c2d27f44fa9942552881a471e5067465dbace40bf68b28998dded0556127a1d8662b96de4de4fd76c1c8b98bdae796036553ab4b05ca9f160839d841ba3 SHA512 1c2efff87a82a57e57b0c60023c87bae93f6718114c8f9dc010d4c21119a2f7576d0225dab5f0a227c2cfc6fb6bdbd62728e407f35fce5bf351bb50cf9e0fd34
DIST ncurses-6.4.tar.gz.sig 438 BLAKE2B e6a78b8d0cbce1577205b49b0260394094632cefd95294813c7e4e51a2908e8599a9f24b3b648e42ba16c015fb9424b2a82236f58aac3bf96f5400a50482e44e SHA512 f2a7859725b4d5d62f68006338d56598ac6b38a1448983108906e192f0ec922be287cc89bcc79c1ae49ebc80c967af3dd077427f35ae579b00d445c882414fed
+DIST ncurses-6.4_p20230408-patches.tar.xz 80472 BLAKE2B 0ba8156ebd4f1691fec7bc1b800ef39ce6a4210573c027dd437919cdcd7c995830116da06c69f31c65923845a4d5c88e974673fac38acce5813f7d6cdc646e3e SHA512 32960e2cc4cd9dc60c38b49f46c5ce2c02179479abb66ca29f63cd06475ae8e26299a78b5f06762d114aefbbca3ba6fbebe7093a58106eeaa40cf500d21633a4
diff --git a/sys-libs/ncurses/ncurses-6.4_p20230408.ebuild b/sys-libs/ncurses/ncurses-6.4_p20230408.ebuild
new file mode 100644
index 000000000000..1aeefdfc13fd
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.4_p20230408.ebuild
@@ -0,0 +1,430 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.4_p20230408
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20230107
+ 20230114
+ 20230121
+ 20230128
+ 20230211
+ 20230218
+ 20230225
+ 20230311
+ 20230401
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ # We keep a bunch of mirrors here as we've had reports of invisible*.net
+ # being 403 forbidden for some users.
+ urls=(
+ "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
+ )
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ for url in "${urls[@]}" ; do
+ patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ unset urls
+ fi
+fi
+
+SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="
+ ${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
+"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_prepare with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CXX,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # bug #852665
+ if [[ ${CHOST} == *-cygwin* ]]; then
+ BUILD_CPPFLAGS+=" -DBUILDING_NCURSES"
+ fi
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CXX=${BUILD_CXX} \
+ CPP=${BUILD_CPP} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-02-24 12:59 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-02-24 12:59 UTC (permalink / raw
To: gentoo-commits
commit: 2953e1093acd734f2cc5554d34698643322f129f
Author: Peter Foley <pefoley2 <AT> pefoley <DOT> com>
AuthorDate: Fri Feb 24 05:42:50 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Feb 24 12:59:46 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2953e109
sys-libs/ncurses: Stop embedding RCS IDs
It's unclear if this is still useful, and it causes a ton of warnings
like:
/var/tmp/portage/sys-libs/ncurses-6.4/work/ncurses-6.4/ncurses/curses.priv.h:60:41: warning: ‘Ident’ defined but not used [-Wunused-const-variable=]
60 | #define MODULE_ID(id) static const char Ident[] = id;
| ^~~~~
/var/tmp/portage/sys-libs/ncurses-6.4/work/ncurses-6.4/ncurses/tinfo/lib_napms.c:55:1: note: in expansion of macro ‘MODULE_ID’
55 | MODULE_ID("$Id: lib_napms.c,v 1.27 2020/08/15 19:45:23 tom Exp $")
| ^~~~~~~~~
[sam: This has been there since the very beginning, going back to
2000-08-03, 495ec043da885fd0d7826ac39147aab1b8173910]
Signed-off-by: Peter Foley <pefoley2 <AT> pefoley.com>
Closes: https://github.com/gentoo/gentoo/pull/29756
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild | 1 -
sys-libs/ncurses/ncurses-6.4.ebuild | 1 -
2 files changed, 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
index 406b0ca3cb24..c986389eed5a 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
@@ -302,7 +302,6 @@ do_configure() {
$(use_enable kernel_Winnt term-driver)
--disable-termcap
--enable-symlinks
- --with-rcs-ids
--with-manpage-format=normal
--enable-const
--enable-colorfgbg
diff --git a/sys-libs/ncurses/ncurses-6.4.ebuild b/sys-libs/ncurses/ncurses-6.4.ebuild
index 58a97be7ee7d..061b210752e5 100644
--- a/sys-libs/ncurses/ncurses-6.4.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4.ebuild
@@ -242,7 +242,6 @@ do_configure() {
$(use_enable kernel_Winnt term-driver)
--disable-termcap
--enable-symlinks
- --with-rcs-ids
--with-manpage-format=normal
--enable-const
--enable-colorfgbg
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-02-22 7:42 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-02-22 7:42 UTC (permalink / raw
To: gentoo-commits
commit: 82564c2f5d5f46e6e7bb0c082f98f39071e2b75d
Author: Peter Foley <pefoley2 <AT> pefoley <DOT> com>
AuthorDate: Wed Feb 22 03:56:25 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Feb 22 07:42:17 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=82564c2f
sys-libs/ncurses: Fix cygwin build
Force -DBUILDING_NCURCES for build tools to avoid dllimport errors.
Update tic build to use get_exeext, which fixes native builds.
Bug: https://bugs.gentoo.org/852665
Signed-off-by: Peter Foley <pefoley2 <AT> pefoley.com>
Closes: https://github.com/gentoo/gentoo/pull/29713
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild | 21 ++++++++-------------
sys-libs/ncurses/ncurses-6.4.ebuild | 19 +++++++------------
2 files changed, 15 insertions(+), 25 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
index 3dc71f8201ae..406b0ca3cb24 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
@@ -1,10 +1,10 @@
-# Copyright 1999-2022 Gentoo Authors
+# Copyright 1999-2023 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript verify-sig
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
MY_PV="${PV:0:3}"
MY_P="${PN}-${MY_PV}"
@@ -198,6 +198,11 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+ # bug #852665
+ if [[ ${CHOST} == *-cygwin* ]]; then
+ BUILD_CPPFLAGS+=" -DBUILDING_NCURSES"
+ fi
+
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
# binaries in /usr/bin support both wide and narrow.
@@ -348,17 +353,7 @@ do_configure() {
src_compile() {
# See comments in src_configure.
if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
+ BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
fi
multilib-minimal_src_compile
diff --git a/sys-libs/ncurses/ncurses-6.4.ebuild b/sys-libs/ncurses/ncurses-6.4.ebuild
index 2bbacd762737..58a97be7ee7d 100644
--- a/sys-libs/ncurses/ncurses-6.4.ebuild
+++ b/sys-libs/ncurses/ncurses-6.4.ebuild
@@ -4,7 +4,7 @@
EAPI=7
VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript verify-sig
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
MY_PV="${PV:0:3}"
MY_P="${PN}-${MY_PV}"
@@ -142,6 +142,11 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+ # bug #852665
+ if [[ ${CHOST} == *-cygwin* ]]; then
+ BUILD_CPPFLAGS+=" -DBUILDING_NCURSES"
+ fi
+
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
# binaries in /usr/bin support both wide and narrow.
@@ -288,17 +293,7 @@ do_configure() {
src_compile() {
# See comments in src_configure.
if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
+ BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
fi
multilib-minimal_src_compile
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2023-01-01 1:30 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2023-01-01 1:30 UTC (permalink / raw
To: gentoo-commits
commit: db6c8d18b9061ca0ba298edc4cb8dceca75beecc
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Jan 1 01:29:25 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Jan 1 01:29:35 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=db6c8d18
sys-libs/ncurses: add 6.4
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 3 +
sys-libs/ncurses/ncurses-6.4.ebuild | 428 ++++++++++++++++++++++++++++++++++++
2 files changed, 431 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 26c0085100be..833dc709e4bd 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -121,3 +121,6 @@ DIST ncurses-6.3-20221203.patch.gz.asc 729 BLAKE2B a663141e389946fb6967c61c0b6b8
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
DIST ncurses-6.3_p20221203-patches.tar.xz 66988 BLAKE2B ea01eee64b0468fbd5b1a540103f88deff1669533d7b5187440a07ef969249fa664cf770ea8b0cce14b8d93fef9c4fc783c26df13699e205abebacb278d61766 SHA512 2cdadfbd9aed0f33a58150ba71a1a79a23f1590f82dc57a79fe7892bf9a1d86d4604d4c5224f11fdc7c133bcc8d8b60b075e1a493e8cb63743259f0b8d2b66f4
+DIST ncurses-6.4-patches.tar.xz 63720 BLAKE2B 6b767f65a9c7e8f9fdebaa2623e3770872e710fa103d11e48509e5315ebf5ad1a37519b1b40c5138e631693fb2e2e30ea5eef11002698a341a623a85c5b0b4fc SHA512 5094f6cb8fa54d9df0802173f1e0ff2ad40fc3d4bd298c0742479f72ba4f9afee0ccf9f0a4eb068b0a5552523abf7b212861b61abbde6f69ff22d62dd686daa9
+DIST ncurses-6.4.tar.gz 3612591 BLAKE2B 47fd9c2d27f44fa9942552881a471e5067465dbace40bf68b28998dded0556127a1d8662b96de4de4fd76c1c8b98bdae796036553ab4b05ca9f160839d841ba3 SHA512 1c2efff87a82a57e57b0c60023c87bae93f6718114c8f9dc010d4c21119a2f7576d0225dab5f0a227c2cfc6fb6bdbd62728e407f35fce5bf351bb50cf9e0fd34
+DIST ncurses-6.4.tar.gz.sig 438 BLAKE2B e6a78b8d0cbce1577205b49b0260394094632cefd95294813c7e4e51a2908e8599a9f24b3b648e42ba16c015fb9424b2a82236f58aac3bf96f5400a50482e44e SHA512 f2a7859725b4d5d62f68006338d56598ac6b38a1448983108906e192f0ec922be287cc89bcc79c1ae49ebc80c967af3dd077427f35ae579b00d445c882414fed
diff --git a/sys-libs/ncurses/ncurses-6.4.ebuild b/sys-libs/ncurses/ncurses-6.4.ebuild
new file mode 100644
index 000000000000..2bbacd762737
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.4.ebuild
@@ -0,0 +1,428 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.4
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ #20221126
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ # We keep a bunch of mirrors here as we've had reports of invisible*.net
+ # being 403 forbidden for some users.
+ urls=(
+ "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
+ )
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ for url in "${urls[@]}" ; do
+ patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ unset urls
+ fi
+fi
+
+SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="
+ ${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
+"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_prepare with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CXX,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CXX=${BUILD_CXX} \
+ CPP=${BUILD_CPP} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-12-30 20:02 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2022-12-30 20:02 UTC (permalink / raw
To: gentoo-commits
commit: c917be235d11abcea5a41db08813992c70acc05c
Author: Mike Gilbert <floppym <AT> gentoo <DOT> org>
AuthorDate: Fri Dec 30 19:45:47 2022 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Fri Dec 30 20:02:15 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c917be23
sys-libs/ncurses: drop 6.3_p20221203
Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203.ebuild | 486 --------------------------
1 file changed, 486 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
deleted file mode 100644
index 35c1a3c89826..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
+++ /dev/null
@@ -1,486 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.3_p20221203
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
- 20220827
- 20220903
- 20220910
- 20220917
- 20220924
- 20221001
- 20221008
- 20221015
- 20221023
- 20221029
- 20221105
- 20221112
- 20221119
- 20221126
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- # We keep a bunch of mirrors here as we've had reports of invisible*.net
- # being 403 forbidden for some users.
- urls=(
- "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
- )
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- for url in "${urls[@]}" ; do
- patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- unset urls
- fi
-
- SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- # https://lists.gnu.org/archive/html/bug-ncurses/2022-09/msg00024.html
- export EGREP="grep -E"
- export FGREP="grep -F"
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-12-30 20:02 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2022-12-30 20:02 UTC (permalink / raw
To: gentoo-commits
commit: 64f0318c1426c1f4b148f83ed58f2b74b6b7d507
Author: Mike Gilbert <floppym <AT> gentoo <DOT> org>
AuthorDate: Fri Dec 30 19:45:37 2022 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Fri Dec 30 20:02:15 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=64f0318c
sys-libs/ncurses: move stable keywords forward
Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
index 12ed888df557..3dc71f8201ae 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
@@ -143,7 +143,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-12-30 20:02 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2022-12-30 20:02 UTC (permalink / raw
To: gentoo-commits
commit: 8ddc1b6ebfcc1902387edb16db18ef40d9c2611a
Author: Mike Gilbert <floppym <AT> gentoo <DOT> org>
AuthorDate: Fri Dec 30 19:45:00 2022 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Fri Dec 30 20:02:14 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8ddc1b6e
sys-libs/ncurses: revbump for previous change
Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org>
.../{ncurses-6.3_p20221203-r1.ebuild => ncurses-6.3_p20221203-r2.ebuild} | 0
1 file changed, 0 insertions(+), 0 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
similarity index 100%
rename from sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild
rename to sys-libs/ncurses/ncurses-6.3_p20221203-r2.ebuild
^ permalink raw reply [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-12-30 20:02 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2022-12-30 20:02 UTC (permalink / raw
To: gentoo-commits
commit: 5e86ab002036c49c873e8b3a3827c9d125d5e69c
Author: Matt Whitlock <gentoo <AT> mattwhitlock <DOT> name>
AuthorDate: Fri Dec 30 04:21:28 2022 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Fri Dec 30 20:02:02 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5e86ab00
sys-libs/ncurses: don't install dangling symlinks
Signed-off-by: Matt Whitlock <gentoo <AT> mattwhitlock.name>
Closes: https://github.com/gentoo/gentoo/pull/28899
Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.3_p20221203.ebuild | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
index 6f5ac7abdbc6..c506847fb1a2 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
@@ -453,7 +453,7 @@ multilib_src_install_all() {
elif use minimal ; then
# Keep only the basic terminfo files
find "${ED}"/usr/share/terminfo/ \
- -type f ${terms[*]/#/! -name } -delete , \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
-type d -empty -delete || die
fi
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild
index 0f602578429d..22d5938e58da 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild
@@ -451,7 +451,7 @@ multilib_src_install_all() {
elif use minimal ; then
# Keep only the basic terminfo files
find "${ED}"/usr/share/terminfo/ \
- -type f ${terms[*]/#/! -name } -delete , \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
-type d -empty -delete || die
fi
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild
index a6358a7b4821..12ed888df557 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild
@@ -465,7 +465,7 @@ multilib_src_install_all() {
elif use minimal ; then
# Keep only the basic terminfo files
find "${ED}"/usr/share/terminfo/ \
- -type f ${terms[*]/#/! -name } -delete , \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
-type d -empty -delete || die
fi
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
index 102e2c4b61db..35c1a3c89826 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
@@ -463,7 +463,7 @@ multilib_src_install_all() {
elif use minimal ; then
# Keep only the basic terminfo files
find "${ED}"/usr/share/terminfo/ \
- -type f ${terms[*]/#/! -name } -delete , \
+ \( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
-type d -empty -delete || die
fi
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-12-29 16:17 James Le Cuirot
0 siblings, 0 replies; 213+ messages in thread
From: James Le Cuirot @ 2022-12-29 16:17 UTC (permalink / raw
To: gentoo-commits
commit: 11f4e009bbb74ea06be8c9e78127be4505217c51
Author: James Le Cuirot <chewi <AT> gentoo <DOT> org>
AuthorDate: Thu Dec 29 15:30:09 2022 +0000
Commit: James Le Cuirot <chewi <AT> gentoo <DOT> org>
CommitDate: Thu Dec 29 16:16:34 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=11f4e009
sys-libs/ncurses: Fix leaking of cross toolchain into native build
If you had overridden CXX or CPP for a cross build, to use Clang for example,
the native build would have erroneously used these. It didn't seem to break the
build, but it did at least emit some scary warnings.
Signed-off-by: James Le Cuirot <chewi <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild | 488 +++++++++++++++++++++++
1 file changed, 488 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild
new file mode 100644
index 000000000000..a6358a7b4821
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild
@@ -0,0 +1,488 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.3_p20221203
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+ 20220827
+ 20220903
+ 20220910
+ 20220917
+ 20220924
+ 20221001
+ 20221008
+ 20221015
+ 20221023
+ 20221029
+ 20221105
+ 20221112
+ 20221119
+ 20221126
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ # We keep a bunch of mirrors here as we've had reports of invisible*.net
+ # being 403 forbidden for some users.
+ urls=(
+ "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
+ )
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ for url in "${urls[@]}" ; do
+ patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ unset urls
+ fi
+
+ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_prepare with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CXX,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CXX=${BUILD_CXX} \
+ CPP=${BUILD_CPP} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ # https://lists.gnu.org/archive/html/bug-ncurses/2022-09/msg00024.html
+ export EGREP="grep -E"
+ export FGREP="grep -F"
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ -type f ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-12-16 20:45 Arthur Zamarin
0 siblings, 0 replies; 213+ messages in thread
From: Arthur Zamarin @ 2022-12-16 20:45 UTC (permalink / raw
To: gentoo-commits
commit: 128f6c7840cec65ac4bb932626479849f75f0e36
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Fri Dec 16 20:44:57 2022 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Fri Dec 16 20:44:57 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=128f6c78
sys-libs/ncurses: Stabilize 6.3_p20221203 ppc, #886245
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
index 7afadd246f54..102e2c4b61db 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
@@ -143,7 +143,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ~ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-12-16 15:54 Arthur Zamarin
0 siblings, 0 replies; 213+ messages in thread
From: Arthur Zamarin @ 2022-12-16 15:54 UTC (permalink / raw
To: gentoo-commits
commit: b255d4a6d20d183f839218f7a88e448d3156bc02
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Fri Dec 16 15:54:16 2022 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Fri Dec 16 15:54:16 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b255d4a6
sys-libs/ncurses: Stabilize 6.3_p20221203 amd64, #886245
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20221203.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
index f364e891a453..7afadd246f54 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
@@ -143,7 +143,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ~ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ~ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-12-06 16:55 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-12-06 16:55 UTC (permalink / raw
To: gentoo-commits
commit: 16faeb1fecef4f094f8ba95ca3c9ee1755ad4d64
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Tue Dec 6 16:53:39 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Tue Dec 6 16:54:56 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=16faeb1f
sys-libs/ncurses: add 6.3_p20221203
Closes: https://bugs.gentoo.org/884597
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 21 ++
sys-libs/ncurses/ncurses-6.3_p20221203.ebuild | 486 ++++++++++++++++++++++++++
2 files changed, 507 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index dc099aea6d1c..ddb5151fe377 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -98,6 +98,27 @@ DIST ncurses-6.3-20220917.patch.gz 7833 BLAKE2B 338ddfc2b660cff6248bcb2fc39ef13b
DIST ncurses-6.3-20220917.patch.gz.asc 729 BLAKE2B c952f018cee490635809fa3a4ead27964a639289db16db42768c545e85b56033b01ea45b9251cd14f4d0cff97673566a4c8d04f93a1539392b676baeecc0307c SHA512 57de37e7c0fe70b0c1abdabe77b36a95b2845b423f167dd4d5acf5999a7152d69193f707c41f88d6e4210934c120d8c72a93830c6f2f9cb49832266e02314588
DIST ncurses-6.3-20220924.patch.gz 112587 BLAKE2B 77711d12d8b38d72c8f218eae8f1452fe5d6f65e00937b663ee99e399f0b2a53d450391b12900470b1670cd83dfaac3c10ecc2e4358617866edc317c6daeb3fd SHA512 99057a0e28fa03aae415761928a4fd158eca7de1fee34531a102901846a94893de9dce2f1ad08885201ec0f54d379c3b4886725e766c27239ac957108c89dcb4
DIST ncurses-6.3-20220924.patch.gz.asc 729 BLAKE2B 64103419d56b0e3b9ab7d7c0b2c650db18b472f2c656b6939b865f7a93e4f6ef5adbed9e438c21a488c204c0dffc818a9c787558ce04a50c7d1c6384f84889aa SHA512 f4bda8c09b6b701c99ffd3153dd8754496991b7f83c36ee7f49c4c701d081d32adfc9c04fa83e639df7f024479c7ee5b3921f45db9f72e896c48637073eca38b
+DIST ncurses-6.3-20221001.patch.gz 7098 BLAKE2B f5ebeddeeba36ea981910fceee1da21ae69135613138b8cfb595194852719f5e7882b769fda255cf10207ea92667b4b66dd8fe538d770e63ee0fc28a2c29c2d5 SHA512 801145584d37439fa54ada12b55183ac45bab53b007a81573d0ebb572ce4625d3029ca360d013af9e8ea7f9355b2745e7eebdf70ffd27e721bb23ef960c1b4fe
+DIST ncurses-6.3-20221001.patch.gz.asc 729 BLAKE2B 6ed82ee5fdfd8fcef8a2815fceec78a0d17004d0c1ff183794853af2ae49c27a71ed2328a8f476d09474ed26e33dfb3ce846e14814a704fa99d51480a8be96d6 SHA512 268ddb0b3b965cf8fc75d524e7c4adbd4701a599f4fcb249d3b2622f704e821143b11cbb680013552640b4155a36237425381a192b0db3182b817aff4c92239d
+DIST ncurses-6.3-20221008.patch.gz 2634 BLAKE2B b3cfdcd113ae2bf57043d6d46164b5940ccb169e37bee8d248087455d19f0d568aa19b0d3e7502c9b5cf40367cbaf19791b8be9220a4243d2155f284de101102 SHA512 281ea85542e76f9208b33febd93301da0cbb2f6730b2aeacfb804a214b9a6a09f46eab197b4c44910934101f95b77dd8b4a1469f1ba769c5a5d3fbb1c20934f0
+DIST ncurses-6.3-20221008.patch.gz.asc 729 BLAKE2B 0cd4646f0c1970626f2cacb267ea23aadfc0cdc314511921d5416177097f004d7ac9f30fd3ba2ad0360cca95aecbad192852a8492f68448f2030a7ddf37a6058 SHA512 2e1d4fca54c44e9de8f98dd7a438388115785338c413afd6d04dcb9ccddc463bff5dbb3ef248a986a958e0a151f2e3d292c1e773da666b365c2d6e6f3abe724d
+DIST ncurses-6.3-20221015.patch.gz 11135 BLAKE2B 30caf1e12175d5ee968d324a61c53d5fdb173b37754e78b496375e04583a15145587a9683caf55c5eaefcfeb989ac96376f300171df5e83a5d5532507ffbb049 SHA512 6932550e9b0a7257dacaba0d58dce0974f0ec99b21b6646eb2798491d806daf2c51839923bd924e782c9ed59753a94a59c013bf3d44b5aa8875fd51f18c60ac2
+DIST ncurses-6.3-20221015.patch.gz.asc 729 BLAKE2B d9c6b896620bebcfd482780b91289a85f4c17f417b3f1c1de02dccf3a4d49cfad3d3e3655d68a11bb707705c4b41c4301412042f0d261aa6bfb79799c850c615 SHA512 f5e4c69fde071fc0a86c8dc799a28264f9b89fb16b3bdcf7d097161d974622cacb497de70dbe0b4fb51fdc1e11ba9b950427129a5b82ec133674a2c302c5f3b6
+DIST ncurses-6.3-20221023.patch.gz 49192 BLAKE2B 788df519977b62d68fb3da19e8962e94bdd20ce31aca7854beccc5786fd28b87ac3046257a119578eb7f7c115cbe50943db2d606888aee6a7fa28a16600cae2b SHA512 6f511d13e6e61e97400aa4848d3b1660667ee4e6c5d97768f706af75abc200095a07a764e1d6f0f456fbc7a3c3abea79756ead7a8d9c12e654a2ee37dc6a75d2
+DIST ncurses-6.3-20221023.patch.gz.asc 729 BLAKE2B 67627c4d38327483811d3d4399bcbc883a80a9ef2f47760197e862ad55d55f2c90a5b3e9815df177087b135ef3dd8debb5eb4143dbfb5cca648be75cd9914a6d SHA512 a0dc66f49f1db36f066200e4b1b6f91aefc751f9a254305251ccad1eb654aa359e4bfd2de71ff9d75a078fbf3e21fca8adaaddb15165de133bbd37b8deea9613
+DIST ncurses-6.3-20221029.patch.gz 5499 BLAKE2B e76820349aa6f8c19bf40587e220bc04cd3228fe3f726d4db9a6577182bf358276803133abe583e63c65632eb9cddb785b92bc40a88e7affb51dfe972bb1f365 SHA512 9f2bcbbb30992b9a022c35165f63d7fd8a2f7a547886191d28dcb96f502cd87a00348dfa8b94843631a4df4de652be4af854a19fd139530630f2b1f1110f9ce9
+DIST ncurses-6.3-20221029.patch.gz.asc 729 BLAKE2B 08f961d369a41af1b9aba016ac28cb8f69afaa72338b2668fa030a6c2e18b82e3eb144562346b9127f3e73fd108625af0b3566200468101c70a8c77d79452db7 SHA512 7f77cdd7d6f5c43ec10b5877946165d24606d432280107b589dc1862c4352716501c75f05a8be5a638ae9a80aada532ee105305f12d9ce57e972f1cbf1f9bf2a
+DIST ncurses-6.3-20221105.patch.gz 101044 BLAKE2B 80d148a9e24828b474c9dc74fb69442b68552fcbecb314328334e9356281c4e425785b127af07b1c7037dd0e6e3d5988f029637c5850848df98ee938664ff760 SHA512 e1b979b476cce2b6c70bdef5646781f6a930224c575db7abbff692227ae6a057919c6c386c011e6861a906560759e64e2cab72534af3d1ff9cbb97ab2de7d81f
+DIST ncurses-6.3-20221105.patch.gz.asc 729 BLAKE2B 54a9611e3f986e652dc3b0f1e2fd5f552cfd005bc91f80b8ff6492a5f4d07c690202bac59d3165fca2fcee565b1fbf98f81a924afcae60e2d432c043e4e387a8 SHA512 a01bc0170d7e8e340aa958f2de46eff1e1266eedb4a8129b9e7d5aabcc0e542b8c98ee06ba15b861488e588940b2e4fee7ac0bc32c905798067b0eb2dc785e46
+DIST ncurses-6.3-20221112.patch.gz 2879 BLAKE2B f29e9394531de7479f8800f052ba70dce48b70ccb81df2f5e67a95d95d1f763e3442a63a3a2db613e1c25155c01aae2fb0bfb18cd587fe5e1799f2ae5386eef6 SHA512 11480f3607827f07d303295d0ad9de247ef958052729f6a033342183daaa4e310fc4b922d80cbb6e9e29e7c24bb33956a15b3b1ba58c1308f1ef6c33fdb59a37
+DIST ncurses-6.3-20221112.patch.gz.asc 729 BLAKE2B 3a329dfccc227cdfe83ccf3f402d0101b1b652811ac37d57c48b5618944d983c54a5be289004ab4dc0024cba43748054053bce489dff5eec6787dc756be5a60e SHA512 4e2bf7522249ebefaa910b33bb61ae3e520f0c947a5d2e289328476487afef8b11b5d77ea72f21b4178bee2413b5b3982a906dcfab652d0bec0780742ffba350
+DIST ncurses-6.3-20221119.patch.gz 4114 BLAKE2B 3ed898cd2e175e6dc22a25f5c2dc165a04e6ddcea6cca0ab38efa91c0ffd9e0e96d3e3eaa6292a991baabb1fe86183d2187fd6400c2514f000def5f934f1eb0e SHA512 624c63c3fea00646e909402dc88ca5eeab5fa7d0414e35cb055a62655817aee86cb1080e6b95ba47d5566b2f8edaee5610a3577896cffdb0cb838db9d6e6fc73
+DIST ncurses-6.3-20221119.patch.gz.asc 729 BLAKE2B 0e2ae4e2583d5b6bfc6e509511db5d788245c4cc8a0a8884d21707663a466486a9c645c976f88f3d4485162c4de572e0dbb95bcbe34ac8d230af1a9f34f6472c SHA512 84b23b3192fe46dde1d876fca1d2bf2ade847a168440dc7e1e0cc66df137a40d8659299d7797ffdd51dfcbb3a87a5236957d8d40ea5df310d2ed8b55046cdf1d
+DIST ncurses-6.3-20221126.patch.gz 46654 BLAKE2B a216b163a7b7ebf4193e9b18264ddfb4cf90e65210b5b54fe0e7a1bd28b68a37122b0b5c5f9bce61452ed900c4d2b5dbe4498d9dfa70c4dc63522f0a373bc8f9 SHA512 c23d2abbb25d023c1bf9e809d1456920ad9f29f084efe39432d3b1e6b017cdf707c92579a5959b7439a246c075a6a9dc35d2889fe032af70cbbbe33ddb6c04d4
+DIST ncurses-6.3-20221126.patch.gz.asc 729 BLAKE2B 2fe9972b35d9ab865a7cc3f1b1273777ce039ffac8377cbcbe745c8172bb9ae92b62dd355ce2e8194dc10fc1c87a97b72831248bd1193191f4ccb0458f91449b SHA512 e3f7169915d761bbd9a400dc3dd41b7dc7519cecb3962a43a75888aead57c52d27a9de88a8b68d704a4baaf2e362db56a5d52e19b249b7f782cd35ce1806fc9e
+DIST ncurses-6.3-20221203.patch.gz 42388 BLAKE2B 183adbb378793faef9b7e1aafe0a1ac3ce14f81e7bfb393f22ad8a748cbdec6dea586847c9dadd84e709bcdf882728f9c6ff6adc6b0519698d7ed8c7c311b908 SHA512 c5c066abaeb153eaabcc09228e715dc97a7041c72cbad097c37fa5ee5c1a8856ae6b9ee7973deb66aeeccd6e8ed1e7d9ece781dd79e2e75985a59c32861b1629
+DIST ncurses-6.3-20221203.patch.gz.asc 729 BLAKE2B a663141e389946fb6967c61c0b6b8fbafdb98f6ff2513bf382a5210e8d403b4bb5c277d1b102c893c1f33d98805cf5f0da0012c68dbabbb516364ba793975930 SHA512 70b8ef161d2d98a752fa37d3854954aea13b909830b8da9d54ed79aa3148570651b4b30d2baef1e5c4e2f47e9287e758187443508cf359f0f8392f3edcfd9d09
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
DIST ncurses-6.3_p20220924-patches.tar.xz 63272 BLAKE2B 94b617ba8e949bd7b78047bb1a99acb9f5e0e456d4aebfe3d81b405c491071be7aaeb90df68d144c80a7da6a02a916ba3b2c553ecaf7a8a74214860743b7b783 SHA512 7e55e96b94184a84a752a2b482d13c3aaccb41ade79d14569aad00534c03a80f2dbafc5460838b8d51271089c02c5f0da1a73e5a70bc0619217124ae1c647e20
+DIST ncurses-6.3_p20221203-patches.tar.xz 66988 BLAKE2B ea01eee64b0468fbd5b1a540103f88deff1669533d7b5187440a07ef969249fa664cf770ea8b0cce14b8d93fef9c4fc783c26df13699e205abebacb278d61766 SHA512 2cdadfbd9aed0f33a58150ba71a1a79a23f1590f82dc57a79fe7892bf9a1d86d4604d4c5224f11fdc7c133bcc8d8b60b075e1a493e8cb63743259f0b8d2b66f4
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
new file mode 100644
index 000000000000..79aaf5a9de94
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20221203.ebuild
@@ -0,0 +1,486 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.3_p20221203
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+ 20220827
+ 20220903
+ 20220910
+ 20220917
+ 20220924
+ 20221001
+ 20221008
+ 20221015
+ 20221023
+ 20221029
+ 20221105
+ 20221112
+ 20221119
+ 20221126
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ # We keep a bunch of mirrors here as we've had reports of invisible*.net
+ # being 403 forbidden for some users.
+ urls=(
+ "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
+ )
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ for url in "${urls[@]}" ; do
+ patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ unset urls
+ fi
+
+ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_prepare with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ # https://lists.gnu.org/archive/html/bug-ncurses/2022-09/msg00024.html
+ export EGREP="grep -E"
+ export FGREP="grep -F"
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ -type f ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-11-06 3:12 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2022-11-06 3:12 UTC (permalink / raw
To: gentoo-commits
commit: 8f816ffd46d624a44a216420558d0552e96cc19f
Author: Mike Gilbert <floppym <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 6 03:11:39 2022 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Sun Nov 6 03:11:39 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8f816ffd
sys-libs/ncurses: drop multilib
Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
index e8e9e7db219c..223798f81039 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
@@ -4,7 +4,7 @@
EAPI=7
VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript verify-sig
MY_PV="${PV:0:3}"
MY_P="${PN}-${MY_PV}"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-11-06 3:12 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2022-11-06 3:12 UTC (permalink / raw
To: gentoo-commits
commit: 55054c304dbdfbdce6cfa5555fa26bfd0066a1df
Author: Matt Whitlock <gentoo <AT> mattwhitlock <DOT> name>
AuthorDate: Thu Oct 27 12:53:05 2022 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Sun Nov 6 02:57:51 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=55054c30
sys-libs/ncurses: don't populate /etc/terminfo/ when USE="-split-usr"
The rationale for moving the terminfo files for some common terminals
into /etc/terminfo/ was stated in bug #37026: "ncurses, unlike termcap,
stores its terminfo database in '/usr/share'... which may not be
available until all file systems are mounted." With merged-/usr this is
no longer a concern, and, moreover, moving some terminfo files out into
/etc undermines a core motivation of merged-/usr, which is to situate a
complete system image within /usr.
This commit preserves the existing behavior when USE="split-usr" but
eliminates the move of common terminfo files into /etc/terminfo/ when
USE="-split-usr".
Signed-off-by: Matt Whitlock <gentoo <AT> mattwhitlock.name>
Closes: https://github.com/gentoo/gentoo/pull/27988
Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild | 47 ++++++++++++++----------
sys-libs/ncurses/ncurses-6.3_p20220924.ebuild | 47 ++++++++++++++----------
2 files changed, 54 insertions(+), 40 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild
index f9e5093a7eb1..d7f85fe0f003 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild
@@ -415,8 +415,6 @@ multilib_src_install() {
}
multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
local terms=(
# Dumb/simple values that show up when using the in-kernel VT.
ansi console dumb linux
@@ -430,25 +428,34 @@ multilib_src_install_all() {
screen{,-256color}
screen.xterm-256color
)
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ -type f ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
cd "${S}" || die
dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild
index 9a7f05e0fcb6..9ff5fd9601d3 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild
@@ -413,8 +413,6 @@ multilib_src_install() {
}
multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
local terms=(
# Dumb/simple values that show up when using the in-kernel VT.
ansi console dumb linux
@@ -428,25 +426,34 @@ multilib_src_install_all() {
screen{,-256color}
screen.xterm-256color
)
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+ if use split-usr ; then
+ local x
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+ elif use minimal ; then
+ # Keep only the basic terminfo files
+ find "${ED}"/usr/share/terminfo/ \
+ -type f ${terms[*]/#/! -name } -delete , \
+ -type d -empty -delete || die
+ fi
cd "${S}" || die
dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-11-06 3:12 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2022-11-06 3:12 UTC (permalink / raw
To: gentoo-commits
commit: c0ef8b08357a48bdc183fd804e2087454a665add
Author: Mike Gilbert <floppym <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 6 02:59:01 2022 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Sun Nov 6 02:59:01 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c0ef8b08
sys-libs/ncurses: revbump for previous change
Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org>
.../{ncurses-6.3_p20220924-r1.ebuild => ncurses-6.3_p20220924-r10.ebuild} | 0
.../{ncurses-6.3_p20220924.ebuild => ncurses-6.3_p20220924-r2.ebuild} | 0
2 files changed, 0 insertions(+), 0 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
similarity index 100%
rename from sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild
rename to sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild
similarity index 100%
rename from sys-libs/ncurses/ncurses-6.3_p20220924.ebuild
rename to sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild
^ permalink raw reply [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-11-06 3:12 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2022-11-06 3:12 UTC (permalink / raw
To: gentoo-commits
commit: 241a71e80376e1d81cd408a0a74915489435c706
Author: Mike Gilbert <floppym <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 6 03:10:00 2022 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Sun Nov 6 03:10:00 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=241a71e8
sys-libs/ncurses: IUSE="split-usr"
Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
index d7f85fe0f003..e8e9e7db219c 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924-r10.ebuild
@@ -134,7 +134,7 @@ LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild
index 9ff5fd9601d3..0f602578429d 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924-r2.ebuild
@@ -134,7 +134,7 @@ LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-28 20:17 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-28 20:17 UTC (permalink / raw
To: gentoo-commits
commit: 00787a48517bca5dbf90d8b7be3289802f3cfe65
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Wed Sep 28 20:16:36 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Sep 28 20:17:40 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=00787a48
sys-libs/ncurses: avoid egrep/fgrep deprecation warnings
Export EGREP & FGREP to avoid large configure noise (as we run it repeatedly).
Bug: https://lists.gnu.org/archive/html/bug-ncurses/2022-09/msg00024.html
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild | 4 ++++
sys-libs/ncurses/ncurses-6.3_p20220924.ebuild | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild
index 3f93d46bd575..f9e5093a7eb1 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild
@@ -250,6 +250,10 @@ do_configure() {
mkdir "${BUILD_DIR}/${target}" || die
cd "${BUILD_DIR}/${target}" || die
+ # https://lists.gnu.org/archive/html/bug-ncurses/2022-09/msg00024.html
+ export EGREP="grep -E"
+ export FGREP="grep -F"
+
local conf=(
# We need the basic terminfo files in /etc, bug #37026. We will
# add '--with-terminfo-dirs' and then populate /etc/terminfo in
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild
index 4fcb647e26d7..9a7f05e0fcb6 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild
@@ -250,6 +250,10 @@ do_configure() {
mkdir "${BUILD_DIR}/${target}" || die
cd "${BUILD_DIR}/${target}" || die
+ # https://lists.gnu.org/archive/html/bug-ncurses/2022-09/msg00024.html
+ export EGREP="grep -E"
+ export FGREP="grep -F"
+
local conf=(
# We need the basic terminfo files in /etc, bug #37026. We will
# add '--with-terminfo-dirs' and then populate /etc/terminfo in
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-25 5:05 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-25 5:05 UTC (permalink / raw
To: gentoo-commits
commit: fe955a2baf5892a2255f498f9173d95990176f10
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 25 05:04:49 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Sep 25 05:05:08 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=fe955a2b
sys-libs/ncurses: drop versions
None of these versions were stable candidates, so drop them to avoid
confusion. Partly because of b6c4ac1ae4228b4b865da7f9f3ad3c3a1c5a2b00
but also lots of rejigging with patches and such.
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 1 -
sys-libs/ncurses/ncurses-6.3_p20220827-r1.ebuild | 420 --------------------
sys-libs/ncurses/ncurses-6.3_p20220827.ebuild | 418 --------------------
sys-libs/ncurses/ncurses-6.3_p20220917-r1.ebuild | 464 -----------------------
sys-libs/ncurses/ncurses-6.3_p20220917.ebuild | 462 ----------------------
5 files changed, 1765 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 46fc616af217..dc099aea6d1c 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -100,5 +100,4 @@ DIST ncurses-6.3-20220924.patch.gz 112587 BLAKE2B 77711d12d8b38d72c8f218eae8f145
DIST ncurses-6.3-20220924.patch.gz.asc 729 BLAKE2B 64103419d56b0e3b9ab7d7c0b2c650db18b472f2c656b6939b865f7a93e4f6ef5adbed9e438c21a488c204c0dffc818a9c787558ce04a50c7d1c6384f84889aa SHA512 f4bda8c09b6b701c99ffd3153dd8754496991b7f83c36ee7f49c4c701d081d32adfc9c04fa83e639df7f024479c7ee5b3921f45db9f72e896c48637073eca38b
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
-DIST ncurses-6.3_p20220910-patches.tar.xz 62776 BLAKE2B a65260559ca4f69d724fdaec5ebade7f213144ff77485f6a8b6a55632736caae350ab478550d7ad3a3b723c4804397e8c5dfbed172f77f4f91a444a545b85f16 SHA512 21a51325ab649213e09ea67bc22045e91e67766211766f2d19477e740d36cb235b292576230d087532ba0b44947938d29fd2d28199084fb91e3f8cd3cd6cf00a
DIST ncurses-6.3_p20220924-patches.tar.xz 63272 BLAKE2B 94b617ba8e949bd7b78047bb1a99acb9f5e0e456d4aebfe3d81b405c491071be7aaeb90df68d144c80a7da6a02a916ba3b2c553ecaf7a8a74214860743b7b783 SHA512 7e55e96b94184a84a752a2b482d13c3aaccb41ade79d14569aad00534c03a80f2dbafc5460838b8d51271089c02c5f0da1a73e5a70bc0619217124ae1c647e20
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220827-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220827-r1.ebuild
deleted file mode 100644
index 00c25213f3dc..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220827-r1.ebuild
+++ /dev/null
@@ -1,420 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
- else
- patch_url=
- my_patch_index=
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
- unset patch_url
- unset my_patch_index
- fi
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
-)
-
-src_prepare() {
- if [[ ${PV} == *_p* ]] ; then
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- # If we have a rollup patch, use that instead of the individual ones.
- eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- else
- eapply "${WORKDIR}"/
- fi
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220827.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220827.ebuild
deleted file mode 100644
index 0c36e629826e..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220827.ebuild
+++ /dev/null
@@ -1,418 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
- else
- patch_url=
- my_patch_index=
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
- unset patch_url
- unset my_patch_index
- fi
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
-)
-
-src_prepare() {
- if [[ ${PV} == *_p* ]] ; then
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- # If we have a rollup patch, use that instead of the individual ones.
- eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- else
- eapply "${WORKDIR}"/
- fi
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220917-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220917-r1.ebuild
deleted file mode 100644
index f412a82933aa..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220917-r1.ebuild
+++ /dev/null
@@ -1,464 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.3_p20220910
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
- 20220827
- 20220903
- 20220910
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- # We keep a bunch of mirrors here as we've had reports of invisible*.net
- # being 403 forbidden for some users.
- urls=(
- "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
- )
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- for url in "${urls[@]}" ; do
- patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- unset urls
- fi
-
- SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_unpack with upstream patches already applied. git am
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220917.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220917.ebuild
deleted file mode 100644
index ac56ad1e72d6..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220917.ebuild
+++ /dev/null
@@ -1,462 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.3_p20220910
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
- 20220827
- 20220903
- 20220910
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- # We keep a bunch of mirrors here as we've had reports of invisible*.net
- # being 403 forbidden for some users.
- urls=(
- "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
- "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
- )
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- for url in "${urls[@]}" ; do
- patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- unset urls
- fi
-
- SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_unpack with upstream patches already applied. git am
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-25 1:15 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-25 1:15 UTC (permalink / raw
To: gentoo-commits
commit: b6c4ac1ae4228b4b865da7f9f3ad3c3a1c5a2b00
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 25 01:14:49 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Sep 25 01:14:54 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b6c4ac1a
sys-libs/ncurses: add 6.3_p20220924
Wasn't necessarily planning on doing more of these snapshots but
a (Gentoo) user reported [0] a bug upstream that's fixed in this version,
so why not?
[0] https://lists.gnu.org/archive/html/bug-ncurses/2022-09/msg00020.html
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 3 +
sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild | 465 +++++++++++++++++++++++
sys-libs/ncurses/ncurses-6.3_p20220924.ebuild | 463 ++++++++++++++++++++++
3 files changed, 931 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 0c5441853c5a..46fc616af217 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -96,6 +96,9 @@ DIST ncurses-6.3-20220910.patch.gz 120984 BLAKE2B 69ad11c6d31d4bb97737e6ede506ba
DIST ncurses-6.3-20220910.patch.gz.asc 729 BLAKE2B 55c87ac9edd67abf2c39823acc37a9c8dce6852344d38b442bc2e4693a44412383c2ea710d3030b079607824877f6a1f5efc50970ccd51086c62ebed23e7ee05 SHA512 887031e5248665c79abbc35f4c1e63cffa3b271359188e266372c624b1ac2ce6bb269823c16ea0f6662e4e4acf592179db8f0030fdd9b03ed531d37d5fb7b44e
DIST ncurses-6.3-20220917.patch.gz 7833 BLAKE2B 338ddfc2b660cff6248bcb2fc39ef13baf3d622c9f68b47c2da4d94e21a12dec7f6d98f7125a154f1e4dbe612cde9172de9d78851bba1fe4e9106dc1cd9e0a26 SHA512 5b2de00087211b9e599aecbe94870504c4bd312d9f0ab4959e706f784700e6e3095beeb8283ed8df9911f5e841f1004a2ef5184ee2c04762a63d84c47c2f4cfe
DIST ncurses-6.3-20220917.patch.gz.asc 729 BLAKE2B c952f018cee490635809fa3a4ead27964a639289db16db42768c545e85b56033b01ea45b9251cd14f4d0cff97673566a4c8d04f93a1539392b676baeecc0307c SHA512 57de37e7c0fe70b0c1abdabe77b36a95b2845b423f167dd4d5acf5999a7152d69193f707c41f88d6e4210934c120d8c72a93830c6f2f9cb49832266e02314588
+DIST ncurses-6.3-20220924.patch.gz 112587 BLAKE2B 77711d12d8b38d72c8f218eae8f1452fe5d6f65e00937b663ee99e399f0b2a53d450391b12900470b1670cd83dfaac3c10ecc2e4358617866edc317c6daeb3fd SHA512 99057a0e28fa03aae415761928a4fd158eca7de1fee34531a102901846a94893de9dce2f1ad08885201ec0f54d379c3b4886725e766c27239ac957108c89dcb4
+DIST ncurses-6.3-20220924.patch.gz.asc 729 BLAKE2B 64103419d56b0e3b9ab7d7c0b2c650db18b472f2c656b6939b865f7a93e4f6ef5adbed9e438c21a488c204c0dffc818a9c787558ce04a50c7d1c6384f84889aa SHA512 f4bda8c09b6b701c99ffd3153dd8754496991b7f83c36ee7f49c4c701d081d32adfc9c04fa83e639df7f024479c7ee5b3921f45db9f72e896c48637073eca38b
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
DIST ncurses-6.3_p20220910-patches.tar.xz 62776 BLAKE2B a65260559ca4f69d724fdaec5ebade7f213144ff77485f6a8b6a55632736caae350ab478550d7ad3a3b723c4804397e8c5dfbed172f77f4f91a444a545b85f16 SHA512 21a51325ab649213e09ea67bc22045e91e67766211766f2d19477e740d36cb235b292576230d087532ba0b44947938d29fd2d28199084fb91e3f8cd3cd6cf00a
+DIST ncurses-6.3_p20220924-patches.tar.xz 63272 BLAKE2B 94b617ba8e949bd7b78047bb1a99acb9f5e0e456d4aebfe3d81b405c491071be7aaeb90df68d144c80a7da6a02a916ba3b2c553ecaf7a8a74214860743b7b783 SHA512 7e55e96b94184a84a752a2b482d13c3aaccb41ade79d14569aad00534c03a80f2dbafc5460838b8d51271089c02c5f0da1a73e5a70bc0619217124ae1c647e20
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild
new file mode 100644
index 000000000000..3f93d46bd575
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924-r1.ebuild
@@ -0,0 +1,465 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.3_p20220924
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+ 20220827
+ 20220903
+ 20220910
+ 20220917
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ # We keep a bunch of mirrors here as we've had reports of invisible*.net
+ # being 403 forbidden for some users.
+ urls=(
+ "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
+ )
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ for url in "${urls[@]}" ; do
+ patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ unset urls
+ fi
+
+ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_unpack with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild
new file mode 100644
index 000000000000..4fcb647e26d7
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220924.ebuild
@@ -0,0 +1,463 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.3_p20220924
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+ 20220827
+ 20220903
+ 20220910
+ 20220917
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ # We keep a bunch of mirrors here as we've had reports of invisible*.net
+ # being 403 forbidden for some users.
+ urls=(
+ "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
+ )
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ for url in "${urls[@]}" ; do
+ patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ unset urls
+ fi
+
+ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_unpack with upstream patches already applied. git am --reject
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-19 3:05 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-19 3:05 UTC (permalink / raw
To: gentoo-commits
commit: 409c094dc9163499a855dc8b03b43049384913f3
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Sep 19 02:46:19 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Sep 19 03:05:21 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=409c094d
sys-libs/ncurses: add 6.3_p20220917
.. and fix 6.3_p20220910-r1.
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 2 +
...0-r1.ebuild => ncurses-6.3_p20220910-r2.ebuild} | 14 ++++---
...0-r1.ebuild => ncurses-6.3_p20220917-r1.ebuild} | 49 ++++++++++++----------
...0910-r1.ebuild => ncurses-6.3_p20220917.ebuild} | 35 +++++++++-------
4 files changed, 56 insertions(+), 44 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index eaca327fec56..e0fabd4514d9 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -94,6 +94,8 @@ DIST ncurses-6.3-20220903.patch.gz 4814 BLAKE2B 668041aef48d9ce37474edc6d70e0725
DIST ncurses-6.3-20220903.patch.gz.asc 729 BLAKE2B 2f076ce9d390ee02edc0b58ecf3a6881897062e34a5f4c09b503c4b306ee70fb0f08e38518029eae4933508a48bda92716dd4b76159a0aa3d7bbd3835d2695ff SHA512 18cb1a77f67b6fddc9f83366487cb547fe1439e7edcd4fc27632702cd3ffc79622dd1421d32454489d08acec7403a04239b34794e81750b703385189a4534b04
DIST ncurses-6.3-20220910.patch.gz 120984 BLAKE2B 69ad11c6d31d4bb97737e6ede506bac81cd65cf262c1bf6528d4844e8beb4cb353fa7e390d3817c181fead42b268688f8898e9fabf5f98bbef007355ec4b0b7b SHA512 269c376d494e3a82915436d6fbe1bb69dfe70c0330c6f2a8f6a9e49180a332b7fd8ccda0448db723a50c6f5a250391f05c974bc60a9355d3a94380c7afd4192b
DIST ncurses-6.3-20220910.patch.gz.asc 729 BLAKE2B 55c87ac9edd67abf2c39823acc37a9c8dce6852344d38b442bc2e4693a44412383c2ea710d3030b079607824877f6a1f5efc50970ccd51086c62ebed23e7ee05 SHA512 887031e5248665c79abbc35f4c1e63cffa3b271359188e266372c624b1ac2ce6bb269823c16ea0f6662e4e4acf592179db8f0030fdd9b03ed531d37d5fb7b44e
+DIST ncurses-6.3-20220917.patch.gz 7833 BLAKE2B 338ddfc2b660cff6248bcb2fc39ef13baf3d622c9f68b47c2da4d94e21a12dec7f6d98f7125a154f1e4dbe612cde9172de9d78851bba1fe4e9106dc1cd9e0a26 SHA512 5b2de00087211b9e599aecbe94870504c4bd312d9f0ab4959e706f784700e6e3095beeb8283ed8df9911f5e841f1004a2ef5184ee2c04762a63d84c47c2f4cfe
+DIST ncurses-6.3-20220917.patch.gz.asc 729 BLAKE2B c952f018cee490635809fa3a4ead27964a639289db16db42768c545e85b56033b01ea45b9251cd14f4d0cff97673566a4c8d04f93a1539392b676baeecc0307c SHA512 57de37e7c0fe70b0c1abdabe77b36a95b2845b423f167dd4d5acf5999a7152d69193f707c41f88d6e4210934c120d8c72a93830c6f2f9cb49832266e02314588
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
DIST ncurses-6.3_p20220903-patches.tar.xz 76908 BLAKE2B a5afb3a5c016ad6b602e6af77cc4fc067692f1e1245cf006feb2b74e69be13b2ffb2b14c7b5de48780965d6b596621cc399c316657ae63afbe5ea9ff2d9715fa SHA512 11ae7458f925a68bf6d482f204e9e57ef23cf456ea9827c713787f635bd11621c3612651a90f3f3a3c7c2742f95fde4bc87d6500115ef74300b9a4d240ff74ad
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220910-r2.ebuild
similarity index 96%
copy from sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
copy to sys-libs/ncurses/ncurses-6.3_p20220910-r2.ebuild
index 3a999786f58d..ec3eb25b4e2d 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220910-r2.ebuild
@@ -129,7 +129,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
@@ -385,11 +385,6 @@ multilib_src_install() {
$(usex tinfo 'tinfow tinfo' '')
fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
-
# Don't delete '*.dll.a', needed for linking, bug #631468
if ! use static-libs; then
find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
@@ -402,6 +397,13 @@ multilib_src_install() {
# -FIXME-
dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
/usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
}
multilib_src_install_all() {
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220917-r1.ebuild
similarity index 91%
copy from sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
copy to sys-libs/ncurses/ncurses-6.3_p20220917-r1.ebuild
index 3a999786f58d..f412a82933aa 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220917-r1.ebuild
@@ -11,10 +11,12 @@ MY_P="${PN}-${MY_PV}"
DESCRIPTION="Console display library"
HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
GENTOO_PATCH_DEV=sam
GENTOO_PATCH_PV=6.3_p20220910
@@ -85,6 +87,7 @@ if [[ ${PV} == *_p* ]] ; then
20220820
20220827
20220903
+ 20220910
# Latest patch is just _pN = $(ver_cut 4)
$(ver_cut 4)
@@ -100,27 +103,27 @@ if [[ ${PV} == *_p* ]] ; then
patch_url=
my_patch_index=
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
-
- patch_url="$(printf "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ # We keep a bunch of mirrors here as we've had reports of invisible*.net
+ # being 403 forbidden for some users.
+ urls=(
+ "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
+ )
- patch_url="$(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ for url in "${urls[@]}" ; do
+ patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
done
unset patch_url
unset my_patch_index
+ unset urls
fi
SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
@@ -129,7 +132,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
@@ -385,11 +388,6 @@ multilib_src_install() {
$(usex tinfo 'tinfow tinfo' '')
fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
-
# Don't delete '*.dll.a', needed for linking, bug #631468
if ! use static-libs; then
find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
@@ -402,6 +400,13 @@ multilib_src_install() {
# -FIXME-
dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
/usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
}
multilib_src_install_all() {
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220917.ebuild
similarity index 93%
rename from sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
rename to sys-libs/ncurses/ncurses-6.3_p20220917.ebuild
index 3a999786f58d..ac56ad1e72d6 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220917.ebuild
@@ -11,10 +11,12 @@ MY_P="${PN}-${MY_PV}"
DESCRIPTION="Console display library"
HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+SRC_URI="
+ mirror://gnu/ncurses/${MY_P}.tar.gz
https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
+"
GENTOO_PATCH_DEV=sam
GENTOO_PATCH_PV=6.3_p20220910
@@ -85,6 +87,7 @@ if [[ ${PV} == *_p* ]] ; then
20220820
20220827
20220903
+ 20220910
# Latest patch is just _pN = $(ver_cut 4)
$(ver_cut 4)
@@ -100,27 +103,27 @@ if [[ ${PV} == *_p* ]] ; then
patch_url=
my_patch_index=
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
-
- patch_url="$(printf "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ # We keep a bunch of mirrors here as we've had reports of invisible*.net
+ # being 403 forbidden for some users.
+ urls=(
+ "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s"
+ "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s"
+ )
- patch_url="$(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ for url in "${urls[@]}" ; do
+ patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
done
unset patch_url
unset my_patch_index
+ unset urls
fi
SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-19 3:05 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-19 3:05 UTC (permalink / raw
To: gentoo-commits
commit: 86a7853db25f5fb12a63802538244375cd5643db
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Sep 19 02:49:13 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Sep 19 03:05:21 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=86a7853d
sys-libs/ncurses: drop versions
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 1 -
sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild | 446 ----------------------
sys-libs/ncurses/ncurses-6.3_p20220903.ebuild | 444 ----------------------
sys-libs/ncurses/ncurses-6.3_p20220910-r2.ebuild | 461 -----------------------
sys-libs/ncurses/ncurses-6.3_p20220910.ebuild | 459 ----------------------
5 files changed, 1811 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index e0fabd4514d9..0c5441853c5a 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -98,5 +98,4 @@ DIST ncurses-6.3-20220917.patch.gz 7833 BLAKE2B 338ddfc2b660cff6248bcb2fc39ef13b
DIST ncurses-6.3-20220917.patch.gz.asc 729 BLAKE2B c952f018cee490635809fa3a4ead27964a639289db16db42768c545e85b56033b01ea45b9251cd14f4d0cff97673566a4c8d04f93a1539392b676baeecc0307c SHA512 57de37e7c0fe70b0c1abdabe77b36a95b2845b423f167dd4d5acf5999a7152d69193f707c41f88d6e4210934c120d8c72a93830c6f2f9cb49832266e02314588
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
-DIST ncurses-6.3_p20220903-patches.tar.xz 76908 BLAKE2B a5afb3a5c016ad6b602e6af77cc4fc067692f1e1245cf006feb2b74e69be13b2ffb2b14c7b5de48780965d6b596621cc399c316657ae63afbe5ea9ff2d9715fa SHA512 11ae7458f925a68bf6d482f204e9e57ef23cf456ea9827c713787f635bd11621c3612651a90f3f3a3c7c2742f95fde4bc87d6500115ef74300b9a4d240ff74ad
DIST ncurses-6.3_p20220910-patches.tar.xz 62776 BLAKE2B a65260559ca4f69d724fdaec5ebade7f213144ff77485f6a8b6a55632736caae350ab478550d7ad3a3b723c4804397e8c5dfbed172f77f4f91a444a545b85f16 SHA512 21a51325ab649213e09ea67bc22045e91e67766211766f2d19477e740d36cb235b292576230d087532ba0b44947938d29fd2d28199084fb91e3f8cd3cd6cf00a
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
deleted file mode 100644
index 9985db97618b..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
+++ /dev/null
@@ -1,446 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.3_p20220903
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
- 20220827
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- fi
-
- SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_unpack with upstream patches already applied. git am
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
deleted file mode 100644
index 1b8eb4516559..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
+++ /dev/null
@@ -1,444 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.3_p20220903
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
- 20220827
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- fi
-
- SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_unpack with upstream patches already applied. git am
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910-r2.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220910-r2.ebuild
deleted file mode 100644
index ec3eb25b4e2d..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220910-r2.ebuild
+++ /dev/null
@@ -1,461 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.3_p20220910
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
- 20220827
- 20220903
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
-
- patch_url="$(printf "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
-
- patch_url="$(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- fi
-
- SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_unpack with upstream patches already applied. git am
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
deleted file mode 100644
index 3a999786f58d..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
+++ /dev/null
@@ -1,459 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.3_p20220910
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
- 20220827
- 20220903
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
-
- # If we have a rollup patch, use that instead of the individual ones.
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
- else
- patch_url=
- my_patch_index=
-
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
-
- patch_url="$(printf "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
-
- patch_url="$(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- # TODO: replace with loop
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
-
- UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
- done
-
- unset patch_url
- unset my_patch_index
- fi
-
- SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_unpack with upstream patches already applied. git am
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-11 16:49 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-11 16:49 UTC (permalink / raw
To: gentoo-commits
commit: 6e4b6441587051a710b2cd60ff7b3939fff699e3
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 11 16:48:47 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Sep 11 16:49:00 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6e4b6441
sys-libs/ncurses: fixup patch_url
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild | 12 +++++++++++-
sys-libs/ncurses/ncurses-6.3_p20220910.ebuild | 12 +++++++++++-
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
index ef69dddce7cb..3a999786f58d 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
@@ -102,10 +102,20 @@ if [[ ${PV} == *_p* ]] ; then
for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ # TODO: replace with loop
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+
patch_url="$(printf "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- patch_url+=" $(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ # TODO: replace with loop
SRC_URI+=" ${patch_url}"
SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+
+ patch_url="$(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ # TODO: replace with loop
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+
UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
done
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
index ef69dddce7cb..3a999786f58d 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
@@ -102,10 +102,20 @@ if [[ ${PV} == *_p* ]] ; then
for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ # TODO: replace with loop
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+
patch_url="$(printf "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- patch_url+=" $(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ # TODO: replace with loop
SRC_URI+=" ${patch_url}"
SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+
+ patch_url="$(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ # TODO: replace with loop
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+
UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
done
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-11 16:43 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-11 16:43 UTC (permalink / raw
To: gentoo-commits
commit: 9989744ef3d623582544d3715bf99dcd00399dbe
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 11 16:43:18 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Sep 11 16:43:18 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9989744e
sys-libs/ncurses: add additional mirrors
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild | 2 ++
sys-libs/ncurses/ncurses-6.3_p20220910.ebuild | 2 ++
2 files changed, 4 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
index 9a584b3a4e76..ef69dddce7cb 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
@@ -102,6 +102,8 @@ if [[ ${PV} == *_p* ]] ; then
for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ patch_url="$(printf "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ patch_url+=" $(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
SRC_URI+=" ${patch_url}"
SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
index 9a584b3a4e76..ef69dddce7cb 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
@@ -102,6 +102,8 @@ if [[ ${PV} == *_p* ]] ; then
for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ patch_url="$(printf "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ patch_url+=" $(printf "https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
SRC_URI+=" ${patch_url}"
SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-11 14:50 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-11 14:50 UTC (permalink / raw
To: gentoo-commits
commit: c1be1b68719135411b81319ccf58959974b00c03
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 11 14:45:48 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Sep 11 14:49:33 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c1be1b68
sys-libs/ncurses: add 6.3_p20220910
This contains an upstream fix for the musl issue.
Closes: https://bugs.gentoo.org/869128
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 3 +
sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild | 447 +++++++++++++++++++++++
sys-libs/ncurses/ncurses-6.3_p20220910.ebuild | 447 +++++++++++++++++++++++
3 files changed, 897 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 526a2fe5fe91..eaca327fec56 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -92,6 +92,9 @@ DIST ncurses-6.3-20220827.patch.gz 3794 BLAKE2B 2acc58c118af92413189b01d0a9e4d2d
DIST ncurses-6.3-20220827.patch.gz.asc 729 BLAKE2B 363bfe97448821c0eef29e36213389dc9908f289332001851b72e5f0381f76195663f1423150d74c23bb425a37808094e3fa06a261451f59a49861008cbf0e6f SHA512 7180f24a55e3941c7d82498004efb8ef1e9316318c6c53ea5bc1d2b499c960844ff7fd95e1131fcdf2ee4b94a0e8e54ee3f76934c3d91a87775b4a87347f479e
DIST ncurses-6.3-20220903.patch.gz 4814 BLAKE2B 668041aef48d9ce37474edc6d70e0725323ccb1586a88bddda8e7f81a7717688041e73909089b6d15abdefaeffe0bb9565245dee4b086f07c783b0d95e8e7dbc SHA512 487dd56afd773eafa38260f8067293d41ed6bb9ff841b4c7528c12969b00151b7a3788b0b306d3997d7fb1e98c05ccb32c56f8c839bcc2d9eb4aa9e3db4bae1e
DIST ncurses-6.3-20220903.patch.gz.asc 729 BLAKE2B 2f076ce9d390ee02edc0b58ecf3a6881897062e34a5f4c09b503c4b306ee70fb0f08e38518029eae4933508a48bda92716dd4b76159a0aa3d7bbd3835d2695ff SHA512 18cb1a77f67b6fddc9f83366487cb547fe1439e7edcd4fc27632702cd3ffc79622dd1421d32454489d08acec7403a04239b34794e81750b703385189a4534b04
+DIST ncurses-6.3-20220910.patch.gz 120984 BLAKE2B 69ad11c6d31d4bb97737e6ede506bac81cd65cf262c1bf6528d4844e8beb4cb353fa7e390d3817c181fead42b268688f8898e9fabf5f98bbef007355ec4b0b7b SHA512 269c376d494e3a82915436d6fbe1bb69dfe70c0330c6f2a8f6a9e49180a332b7fd8ccda0448db723a50c6f5a250391f05c974bc60a9355d3a94380c7afd4192b
+DIST ncurses-6.3-20220910.patch.gz.asc 729 BLAKE2B 55c87ac9edd67abf2c39823acc37a9c8dce6852344d38b442bc2e4693a44412383c2ea710d3030b079607824877f6a1f5efc50970ccd51086c62ebed23e7ee05 SHA512 887031e5248665c79abbc35f4c1e63cffa3b271359188e266372c624b1ac2ce6bb269823c16ea0f6662e4e4acf592179db8f0030fdd9b03ed531d37d5fb7b44e
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
DIST ncurses-6.3_p20220903-patches.tar.xz 76908 BLAKE2B a5afb3a5c016ad6b602e6af77cc4fc067692f1e1245cf006feb2b74e69be13b2ffb2b14c7b5de48780965d6b596621cc399c316657ae63afbe5ea9ff2d9715fa SHA512 11ae7458f925a68bf6d482f204e9e57ef23cf456ea9827c713787f635bd11621c3612651a90f3f3a3c7c2742f95fde4bc87d6500115ef74300b9a4d240ff74ad
+DIST ncurses-6.3_p20220910-patches.tar.xz 62776 BLAKE2B a65260559ca4f69d724fdaec5ebade7f213144ff77485f6a8b6a55632736caae350ab478550d7ad3a3b723c4804397e8c5dfbed172f77f4f91a444a545b85f16 SHA512 21a51325ab649213e09ea67bc22045e91e67766211766f2d19477e740d36cb235b292576230d087532ba0b44947938d29fd2d28199084fb91e3f8cd3cd6cf00a
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
new file mode 100644
index 000000000000..9a584b3a4e76
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220910-r1.ebuild
@@ -0,0 +1,447 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.3_p20220910
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+ 20220827
+ 20220903
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ fi
+
+ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_unpack with upstream patches already applied. git am
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
new file mode 100644
index 000000000000..9a584b3a4e76
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220910.ebuild
@@ -0,0 +1,447 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.3_p20220910
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+ 20220827
+ 20220903
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ fi
+
+ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_unpack with upstream patches already applied. git am
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
+)
+
+src_unpack() {
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-09 12:41 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-09 12:41 UTC (permalink / raw
To: gentoo-commits
commit: afafb651f1fd433991c35822792469c5c3feb2fd
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 9 12:41:10 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Sep 9 12:41:10 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=afafb651
sys-libs/ncurses: restore keywords
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220903.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
index eb7e04b8ff07..1b8eb4516559 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
@@ -114,7 +114,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-09 12:40 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-09 12:40 UTC (permalink / raw
To: gentoo-commits
commit: 3af14d6d35ff6cef88c5e21642f2b95d10d0bc44
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 9 12:38:48 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Sep 9 12:39:19 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3af14d6d
sys-libs/ncurses: tweak patch logic
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild | 11 ++++++++---
sys-libs/ncurses/ncurses-6.3_p20220903.ebuild | 13 +++++++++----
2 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
index c8f854c99411..9985db97618b 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
@@ -14,6 +14,11 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.3_p20220903
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
UPSTREAM_PATCHES=()
if [[ ${PV} == *_p* ]] ; then
@@ -103,7 +108,7 @@ if [[ ${PV} == *_p* ]] ; then
unset my_patch_index
fi
- SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-6.3_p20220903-patches.tar.xz"
+ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
fi
LICENSE="MIT"
@@ -134,7 +139,7 @@ PATCHES=(
#
# For the same reasons, please include the original configure.in changes,
# NOT just the generated results!
- "${WORKDIR}"/${PN}-6.3_p20220903-patches
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
)
src_unpack() {
@@ -145,7 +150,7 @@ src_unpack() {
if [[ ${file} == ${MY_P}.tar.gz ]] ; then
verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
else
- [[ ${file} == @(patches.tar.xz|*.asc|*.sig) ]] && continue
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
fi
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
index 389f5c864ed5..eb7e04b8ff07 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
@@ -14,6 +14,11 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+GENTOO_PATCH_DEV=sam
+GENTOO_PATCH_PV=6.3_p20220903
+GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
+
+# Populated below in a loop. Do not add patches manually here.
UPSTREAM_PATCHES=()
if [[ ${PV} == *_p* ]] ; then
@@ -103,13 +108,13 @@ if [[ ${PV} == *_p* ]] ; then
unset my_patch_index
fi
- SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-6.3_p20220903-patches.tar.xz"
+ SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
@@ -134,7 +139,7 @@ PATCHES=(
#
# For the same reasons, please include the original configure.in changes,
# NOT just the generated results!
- "${WORKDIR}"/${PN}-6.3_p20220903-patches
+ "${WORKDIR}"/${GENTOO_PATCH_NAME}
)
src_unpack() {
@@ -145,7 +150,7 @@ src_unpack() {
if [[ ${file} == ${MY_P}.tar.gz ]] ; then
verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
else
- [[ ${file} == @(patches.tar.xz|*.asc|*.sig) ]] && continue
+ [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
fi
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-09 12:34 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-09 12:34 UTC (permalink / raw
To: gentoo-commits
commit: b7a6f1a26fae20fe511f05ac09702ed3c94da6fb
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 9 12:32:20 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Sep 9 12:34:12 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b7a6f1a2
sys-libs/ncurses: use hosted patchset for 6.3_p20220903
This is needed because we really want the full generated
configure files in addition to the source (configure.in
changes).
It's far too hard to rebase and also ensure
the patches are doing what they're supposed
to if just relying on patches to a huge
configure script.
Rebase the whole lot, and then throw in
the patch for bug 869128 from 345696eea0fbeb96946f1c1ae7293150c2c7e8ad.
Closes: https://bugs.gentoo.org/869128
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 2 +-
sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild | 44 ++++++++++++-----------
sys-libs/ncurses/ncurses-6.3_p20220903.ebuild | 46 +++++++++++++-----------
3 files changed, 50 insertions(+), 42 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 6f1cdb953a38..526a2fe5fe91 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -94,4 +94,4 @@ DIST ncurses-6.3-20220903.patch.gz 4814 BLAKE2B 668041aef48d9ce37474edc6d70e0725
DIST ncurses-6.3-20220903.patch.gz.asc 729 BLAKE2B 2f076ce9d390ee02edc0b58ecf3a6881897062e34a5f4c09b503c4b306ee70fb0f08e38518029eae4933508a48bda92716dd4b76159a0aa3d7bbd3835d2695ff SHA512 18cb1a77f67b6fddc9f83366487cb547fe1439e7edcd4fc27632702cd3ffc79622dd1421d32454489d08acec7403a04239b34794e81750b703385189a4534b04
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
-DIST ncurses-6.3_p20220903-musl-xopen_source.patch.xz 43008 BLAKE2B 463645c62d2c72e8e1be14e510867d709ec6f78e3d7b78df317f5a8351264f19c04cb93cd3296a1df783db58d4ed5e5885f9b45a04dd0d549db9e41274d8448f SHA512 c2b0810fafca1cffb27095d207fe2d29daf5d1bbc79142a717ea79df8d3873b12664fbd8538e08c4576f9366acc7ac335b56df62310efc191cf20df52af2bf1c
+DIST ncurses-6.3_p20220903-patches.tar.xz 76908 BLAKE2B a5afb3a5c016ad6b602e6af77cc4fc067692f1e1245cf006feb2b74e69be13b2ffb2b14c7b5de48780965d6b596621cc399c316657ae63afbe5ea9ff2d9715fa SHA512 11ae7458f925a68bf6d482f204e9e57ef23cf456ea9827c713787f635bd11621c3612651a90f3f3a3c7c2742f95fde4bc87d6500115ef74300b9a4d240ff74ad
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
index d2f153326cad..c8f854c99411 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
@@ -103,7 +103,7 @@ if [[ ${PV} == *_p* ]] ; then
unset my_patch_index
fi
- SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-6.3_p20220903-musl-xopen_source.patch.xz"
+ SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-6.3_p20220903-patches.tar.xz"
fi
LICENSE="MIT"
@@ -125,28 +125,32 @@ BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
S="${WORKDIR}/${MY_P}"
PATCHES=(
- ${UPSTREAM_PATCHES[@]}
-
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
- "${WORKDIR}/${PN}-6.3_p20220903-musl-xopen_source.patch" # bug #869128
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_unpack with upstream patches already applied. git am
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${PN}-6.3_p20220903-patches
)
src_unpack() {
- # Can drop this implementation once 6.3_p20220903-musl-xopen_source.patch is dropped
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*musl-xopen_source.patch.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(patches.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
default
}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
index dc99aab55fc5..389f5c864ed5 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
@@ -103,13 +103,13 @@ if [[ ${PV} == *_p* ]] ; then
unset my_patch_index
fi
- SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-6.3_p20220903-musl-xopen_source.patch.xz"
+ SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-6.3_p20220903-patches.tar.xz"
fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
@@ -125,28 +125,32 @@ BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
S="${WORKDIR}/${MY_P}"
PATCHES=(
- ${UPSTREAM_PATCHES[@]}
-
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
- "${WORKDIR}/${PN}-6.3_p20220903-musl-xopen_source.patch" # bug #869128
+ "${UPSTREAM_PATCHES[@]}"
+
+ # When rebasing Gentoo's patchset, please use git from a clean
+ # src_unpack with upstream patches already applied. git am
+ # the existing patchset and rebase as required. This makes it easier
+ # to manage future rebasing & adding new patches.
+ #
+ # For the same reasons, please include the original configure.in changes,
+ # NOT just the generated results!
+ "${WORKDIR}"/${PN}-6.3_p20220903-patches
)
src_unpack() {
- # Can drop this implementation once 6.3_p20220903-musl-xopen_source.patch is dropped
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
- else
- [[ ${file} == @(*musl-xopen_source.patch.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
- fi
- done
+ # Avoid trying to verify our own patchset tarball, there's no point
+ if use verify-sig ; then
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(patches.tar.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+ fi
default
}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-09 11:30 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-09 11:30 UTC (permalink / raw
To: gentoo-commits
commit: a41b235493c3012409002325e8ac17857f3c6ca9
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 9 11:29:50 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Sep 9 11:29:50 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a41b2354
sys-libs/ncurses: drop keywords on 20220903
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220903.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
index 4940f350cbdd..dc99aab55fc5 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
@@ -109,7 +109,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-09 11:19 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-09 11:19 UTC (permalink / raw
To: gentoo-commits
commit: 345696eea0fbeb96946f1c1ae7293150c2c7e8ad
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 9 06:09:41 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Sep 9 11:18:53 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=345696ee
sys-libs/ncurses: add 6.3_p20220903, use -D_XOPEN_SOURCE=600 on musl (fix ncursesw usage)
Before, `pkg-config --cflags ncurses` would not include -D_XOPEN_SOURCE=600
and then various unicode/wide definitions would not be exposed.
Closes: https://bugs.gentoo.org/869128
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 3 +
sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild | 437 +++++++++++++++++++++++
sys-libs/ncurses/ncurses-6.3_p20220903.ebuild | 435 ++++++++++++++++++++++
3 files changed, 875 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 908c92313ee3..6f1cdb953a38 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -90,5 +90,8 @@ DIST ncurses-6.3-20220820.patch.gz 32018 BLAKE2B 14a29ee43c4d8df82a9f939ef4e028a
DIST ncurses-6.3-20220820.patch.gz.asc 729 BLAKE2B 93179103d5465b5ddff8513a383099bbf07993a1286a164b69d213c176cc39144fc8afb407fbbb2596d975bd7017b677f75609fe8ddaa3415f46cc73c5bdcbe3 SHA512 5e589d29903a2c6c1e85dfb64d7267e3528d65e49a7c4851318139142524bed4824dd787f980b2fbe8327f0b804ecea1ca94bbb6c7615fee9d993ea6d1568773
DIST ncurses-6.3-20220827.patch.gz 3794 BLAKE2B 2acc58c118af92413189b01d0a9e4d2d3f211921eadbbb3df775d5b64f387d860ddca58ddd2f6ae4ffc04932a5924d03f20ba945eb89a5a1f91382ed0ef0f65f SHA512 5021d4f1ddfcb9baa05926bf3e6cd00f051f301037b2166a48b178a945052a4b2424efd175759a0dde7d604316269ead8554c4eb0c2c46c11d1fd54fad6801a1
DIST ncurses-6.3-20220827.patch.gz.asc 729 BLAKE2B 363bfe97448821c0eef29e36213389dc9908f289332001851b72e5f0381f76195663f1423150d74c23bb425a37808094e3fa06a261451f59a49861008cbf0e6f SHA512 7180f24a55e3941c7d82498004efb8ef1e9316318c6c53ea5bc1d2b499c960844ff7fd95e1131fcdf2ee4b94a0e8e54ee3f76934c3d91a87775b4a87347f479e
+DIST ncurses-6.3-20220903.patch.gz 4814 BLAKE2B 668041aef48d9ce37474edc6d70e0725323ccb1586a88bddda8e7f81a7717688041e73909089b6d15abdefaeffe0bb9565245dee4b086f07c783b0d95e8e7dbc SHA512 487dd56afd773eafa38260f8067293d41ed6bb9ff841b4c7528c12969b00151b7a3788b0b306d3997d7fb1e98c05ccb32c56f8c839bcc2d9eb4aa9e3db4bae1e
+DIST ncurses-6.3-20220903.patch.gz.asc 729 BLAKE2B 2f076ce9d390ee02edc0b58ecf3a6881897062e34a5f4c09b503c4b306ee70fb0f08e38518029eae4933508a48bda92716dd4b76159a0aa3d7bbd3835d2695ff SHA512 18cb1a77f67b6fddc9f83366487cb547fe1439e7edcd4fc27632702cd3ffc79622dd1421d32454489d08acec7403a04239b34794e81750b703385189a4534b04
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
+DIST ncurses-6.3_p20220903-musl-xopen_source.patch.xz 43008 BLAKE2B 463645c62d2c72e8e1be14e510867d709ec6f78e3d7b78df317f5a8351264f19c04cb93cd3296a1df783db58d4ed5e5885f9b45a04dd0d549db9e41274d8448f SHA512 c2b0810fafca1cffb27095d207fe2d29daf5d1bbc79142a717ea79df8d3873b12664fbd8538e08c4576f9366acc7ac335b56df62310efc191cf20df52af2bf1c
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
new file mode 100644
index 000000000000..d2f153326cad
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220903-r1.ebuild
@@ -0,0 +1,437 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+ 20220827
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ fi
+
+ SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-6.3_p20220903-musl-xopen_source.patch.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ ${UPSTREAM_PATCHES[@]}
+
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
+ "${WORKDIR}/${PN}-6.3_p20220903-musl-xopen_source.patch" # bug #869128
+)
+
+src_unpack() {
+ # Can drop this implementation once 6.3_p20220903-musl-xopen_source.patch is dropped
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*musl-xopen_source.patch.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
new file mode 100644
index 000000000000..4940f350cbdd
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220903.ebuild
@@ -0,0 +1,435 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+UPSTREAM_PATCHES=()
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+ 20220827
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+
+ # If we have a rollup patch, use that instead of the individual ones.
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh )
+ else
+ patch_url=
+ my_patch_index=
+
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch )
+ done
+
+ unset patch_url
+ unset my_patch_index
+ fi
+
+ SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-6.3_p20220903-musl-xopen_source.patch.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ ${UPSTREAM_PATCHES[@]}
+
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
+ "${WORKDIR}/${PN}-6.3_p20220903-musl-xopen_source.patch" # bug #869128
+)
+
+src_unpack() {
+ # Can drop this implementation once 6.3_p20220903-musl-xopen_source.patch is dropped
+ local file
+ for file in ${A} ; do
+ if [[ ${file} == ${MY_P}.tar.gz ]] ; then
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
+ else
+ [[ ${file} == @(*musl-xopen_source.patch.xz|*.asc|*.sig) ]] && continue
+
+ verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
+ fi
+ done
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-09-01 2:21 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-09-01 2:21 UTC (permalink / raw
To: gentoo-commits
commit: 061152bfe742b09799ea7c3ff2fa2e145e49f2b1
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Sep 1 02:21:02 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Sep 1 02:21:02 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=061152bf
sys-libs/ncurses: drop versions
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild | 407 ----------------------
sys-libs/ncurses/ncurses-6.3_p20220820-r1.ebuild | 426 -----------------------
sys-libs/ncurses/ncurses-6.3_p20220820.ebuild | 424 ----------------------
3 files changed, 1257 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
deleted file mode 100644
index f7f4f7c7d153..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
+++ /dev/null
@@ -1,407 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
- else
- patch_url=
- my_patch_index=
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
- unset patch_url
- unset my_patch_index
- fi
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
-)
-
-src_prepare() {
- if [[ ${PV} == *_p* ]] ; then
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- # If we have a rollup patch, use that instead of the individual ones.
- eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- else
- eapply "${WORKDIR}"/
- fi
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Should be fixed upstream soon:
- # https://lists.gnu.org/archive/html/bug-ncurses/2022-08/msg00024.html
- # bug #866398
- sed -i -e 's/ld --verbose/${LD} --verbose/' configure || die
- sed -i -e 's/pkg-config --version/${PKG_CONFIG} --version/' misc/gen-pkgconfig.in || die
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220820-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220820-r1.ebuild
deleted file mode 100644
index ee652af5700d..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220820-r1.ebuild
+++ /dev/null
@@ -1,426 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
- else
- patch_url=
- my_patch_index=
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
- unset patch_url
- unset my_patch_index
- fi
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
-)
-
-src_prepare() {
- if [[ ${PV} == *_p* ]] ; then
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- # If we have a rollup patch, use that instead of the individual ones.
- eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- else
- eapply "${WORKDIR}"/
- fi
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Should be fixed upstream soon:
- # https://lists.gnu.org/archive/html/bug-ncurses/2022-08/msg00024.html
- # bug #866398
- sed -i -e 's/ld --verbose/${LD} --verbose/' configure || die
- sed -i -e 's/pkg-config --version/${PKG_CONFIG} --version/' misc/gen-pkgconfig.in || die
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220820.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220820.ebuild
deleted file mode 100644
index d911bf424397..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20220820.ebuild
+++ /dev/null
@@ -1,424 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- 20211106
- 20211113
- 20211115
- 20211120
- 20211127
- 20211204
- 20211211
- 20211219
- 20211225
- 20220101
- 20220115
- 20220122
- 20220129
- 20220205
- 20220212
- 20220219
- 20220226
- 20220305
- 20220312
- 20220319
- 20220326
- 20220402
- 20220409
- 20220416
- 20220423
- 20220430
- 20220501
- 20220507
- 20220514
- 20220521
- 20220529
- 20220604
- 20220612
- 20220618
- 20220625
- 20220703
- 20220709
- 20220716
- 20220724
- 20220729
- 20220806
- 20220813
- 20220820
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
- SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
- else
- patch_url=
- my_patch_index=
- for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
- patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
- SRC_URI+=" ${patch_url}"
- SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
- done
- unset patch_url
- unset my_patch_index
- fi
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
-)
-
-src_prepare() {
- if [[ ${PV} == *_p* ]] ; then
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- # If we have a rollup patch, use that instead of the individual ones.
- eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- else
- eapply "${WORKDIR}"/
- fi
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Should be fixed upstream soon:
- # https://lists.gnu.org/archive/html/bug-ncurses/2022-08/msg00024.html
- # bug #866398
- sed -i -e 's/ld --verbose/${LD} --verbose/' configure || die
- sed -i -e 's/pkg-config --version/${PKG_CONFIG} --version/' misc/gen-pkgconfig.in || die
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
- # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- # bug #245374
- keepdir /usr/share/terminfo
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-08-29 19:06 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-08-29 19:06 UTC (permalink / raw
To: gentoo-commits
commit: be24fe0d566e4f4802370dfa69445c521e4e3340
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Aug 29 18:50:43 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Aug 29 18:56:04 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=be24fe0d
sys-libs/ncurses: add 6.3_p20220827
Closes: https://bugs.gentoo.org/866398
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 2 +
sys-libs/ncurses/ncurses-6.3_p20220827-r1.ebuild | 420 +++++++++++++++++++++++
sys-libs/ncurses/ncurses-6.3_p20220827.ebuild | 418 ++++++++++++++++++++++
3 files changed, 840 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 6eb8bcc753a5..908c92313ee3 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -88,5 +88,7 @@ DIST ncurses-6.3-20220813.patch.gz 11762 BLAKE2B e8a269aef28639deccf5db2fc2e6493
DIST ncurses-6.3-20220813.patch.gz.asc 729 BLAKE2B e964291deb463dbce2dace974e2d7d6dffa8656d6b3f1b3f5651e0df8bae0bbb3edfcfdd02ef016bd0d452610bd329230ebc0bf5dd0d747fa88608a4f18ee73f SHA512 ff8e14a50165d0281b4a48d96a211e9c613d95ad20d78e261e1febbb17a9b8415351a38f594ce1c06707fada76b9a15ccbc5ba532cd4074e8a89d6571ade7918
DIST ncurses-6.3-20220820.patch.gz 32018 BLAKE2B 14a29ee43c4d8df82a9f939ef4e028a482a8695feb89fdf6ec234410e3c1db105a4610f71f04c94acb322ff7d474196e4cb472ea5bbfdb7ce57e57c9a07c9139 SHA512 bdc458134e9c0c50c6e8aeeb44f05292f838d147186f2be5f8c872a43b376a66482ad7dec7aaa8a3facecd2c404ed5309cc744a6173b0570c6bfb0db40385619
DIST ncurses-6.3-20220820.patch.gz.asc 729 BLAKE2B 93179103d5465b5ddff8513a383099bbf07993a1286a164b69d213c176cc39144fc8afb407fbbb2596d975bd7017b677f75609fe8ddaa3415f46cc73c5bdcbe3 SHA512 5e589d29903a2c6c1e85dfb64d7267e3528d65e49a7c4851318139142524bed4824dd787f980b2fbe8327f0b804ecea1ca94bbb6c7615fee9d993ea6d1568773
+DIST ncurses-6.3-20220827.patch.gz 3794 BLAKE2B 2acc58c118af92413189b01d0a9e4d2d3f211921eadbbb3df775d5b64f387d860ddca58ddd2f6ae4ffc04932a5924d03f20ba945eb89a5a1f91382ed0ef0f65f SHA512 5021d4f1ddfcb9baa05926bf3e6cd00f051f301037b2166a48b178a945052a4b2424efd175759a0dde7d604316269ead8554c4eb0c2c46c11d1fd54fad6801a1
+DIST ncurses-6.3-20220827.patch.gz.asc 729 BLAKE2B 363bfe97448821c0eef29e36213389dc9908f289332001851b72e5f0381f76195663f1423150d74c23bb425a37808094e3fa06a261451f59a49861008cbf0e6f SHA512 7180f24a55e3941c7d82498004efb8ef1e9316318c6c53ea5bc1d2b499c960844ff7fd95e1131fcdf2ee4b94a0e8e54ee3f76934c3d91a87775b4a87347f479e
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220827-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220827-r1.ebuild
new file mode 100644
index 000000000000..00c25213f3dc
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220827-r1.ebuild
@@ -0,0 +1,420 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+ else
+ patch_url=
+ my_patch_index=
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+ unset patch_url
+ unset my_patch_index
+ fi
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
+)
+
+src_prepare() {
+ if [[ ${PV} == *_p* ]] ; then
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ # If we have a rollup patch, use that instead of the individual ones.
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ else
+ eapply "${WORKDIR}"/
+ fi
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220827.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220827.ebuild
new file mode 100644
index 000000000000..0c36e629826e
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220827.ebuild
@@ -0,0 +1,418 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+ else
+ patch_url=
+ my_patch_index=
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+ unset patch_url
+ unset my_patch_index
+ fi
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
+)
+
+src_prepare() {
+ if [[ ${PV} == *_p* ]] ; then
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ # If we have a rollup patch, use that instead of the individual ones.
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ else
+ eapply "${WORKDIR}"/
+ fi
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-08-26 10:03 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-08-26 10:03 UTC (permalink / raw
To: gentoo-commits
commit: 51a4147b2cd38cfd331aa1f80bc08708eee54897
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Aug 26 08:45:00 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Aug 26 10:01:15 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=51a4147b
sys-libs/ncurses: drop versions
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 2 -
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 326 ---------------------
sys-libs/ncurses/ncurses-6.3.ebuild | 328 ---------------------
sys-libs/ncurses/ncurses-6.3_p20211106-r1.ebuild | 357 -----------------------
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 354 ----------------------
5 files changed, 1367 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 5bb87254f0a1..6eb8bcc753a5 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,5 +1,3 @@
-DIST ncurses-6.2-20210619-patch.sh.bz2 836967 BLAKE2B f210bf25c33f11d67e54a6f416aae75f0a976880ea543408780fd3a8dc992ee8d9999bf15c925c79504be0f30ade4bbfaed763abedd2b2d6b35de65b353a6314 SHA512 b8392bf6c0b7570766ae31a043df311660201265dfe3e2e49425b1e2aa08c72030b5f5b6c7871532897596262c88a7192e3ff2adfdc618f1b9c13c22c373eeb3
-DIST ncurses-6.2.tar.gz 3425862 BLAKE2B 6680cd7a369a4cb8234442a70869c283f0db6db9d7da1da2a7a5c519eb862a2c9b9411957d99f9ebb5089cad00b42e1ca6bc0784327461113df2eeaec695913c SHA512 4c1333dcc30e858e8a9525d4b9aefb60000cfc727bc4a1062bace06ffc4639ad9f6e54f6bdda0e3a0e5ea14de995f96b52b3327d9ec633608792c99a1e8d840d
DIST ncurses-6.3-20211026.patch.gz 117363 BLAKE2B 74c6c80271edc3b69d17c891436e48ee0579b3d16dd1bbd42f953be5b6ef07596343abd34f4d508b0cb371c1c0febfec12d65e938739892a617c8b141f599753 SHA512 25a99bc9cb7a18eb8fd16a0f887bae90c2551e0228b077d28f7217e58190f4b19a526350c999922f7394a1b749e834643c1bf5f339248b842717c146a3ec1df4
DIST ncurses-6.3-20211026.patch.gz.asc 729 BLAKE2B 470aa4aad00d0dfa9924ca3247d720b720563bfe5a3b5c9571acb4c74a7b3fb55adbae6b0aa854eb0e29c56d7949fa1e3b6d959c25681f1b46c23c96a3c0e054 SHA512 276e8a09ee6fddf20be38b9d8a6f93cbafcec51ed17de375b9d2f4f6c34ff546fdbd81083f54aba1a5aaea5c2c691c25754dfca47568c5b70197437420dd2581
DIST ncurses-6.3-20211030.patch.gz 46304 BLAKE2B 6fa0f5223c97dc045117c208b92e75aad61638585506aeed0fa5cd6b215f67d212fc780e527f1281ae77063edb1ef9b3a3671b00d306fe322c3ca1b34c1d4d81 SHA512 90440af3959a17388999f07a3b40f770c5511bceda6a39d4c56f867dc5ae8494e49cfb700eb79e31422ebfd1b1990f6d7912083c688963139446f1e43e9d08c8
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
deleted file mode 100644
index 464f7ca0bcc2..000000000000
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ /dev/null
@@ -1,326 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-if [[ "${PV}" == *_p* ]] ; then
- SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2
- https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2"
- #SRC_URI+=" https://dev.gentoo.org/~polynomial-c/dist/${P}.patch.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
-)
-
-src_prepare() {
- if [[ "${PV}" == *_p* ]] ; then
- eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- #eapply "${WORKDIR}/${P}.patch"
- fi
- default
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- #CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE="${S}" \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- # don't delete '*.dll.a', needed for linking #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (#689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc for embedded/recovery. #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3.ebuild b/sys-libs/ncurses/ncurses-6.3.ebuild
deleted file mode 100644
index 0faa70d2aa52..000000000000
--- a/sys-libs/ncurses/ncurses-6.3.ebuild
+++ /dev/null
@@ -1,328 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- ftp://ftp.invisible-island.net/${PN}/${MY_P}.tar.gz"
-
-if [[ "${PV}" == *_p* ]] ; then
- SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2
- https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2"
- #SRC_URI+=" https://dev.gentoo.org/~polynomial-c/dist/${P}.patch.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
-)
-
-src_prepare() {
- if [[ "${PV}" == *_p* ]] ; then
- eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- #eapply "${WORKDIR}/${P}.patch"
- fi
- default
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- #CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE="${S}" \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- # don't delete '*.dll.a', needed for linking #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (#689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc for embedded/recovery. #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106-r1.ebuild
deleted file mode 100644
index fbcbf40d9c66..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20211106-r1.ebuild
+++ /dev/null
@@ -1,357 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- ftp://ftp.invisible-island.net/${PN}/${MY_P}.tar.gz"
-
-if [[ "${PV}" == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-mirror.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2
- https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2"
- else
- patch_date=
- for patch_date in "${PATCH_DATES[@]}" ; do
- SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
- SRC_URI+=" https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
- done
- unset patch_date
- fi
-
- #SRC_URI+=" https://dev.gentoo.org/~polynomial-c/dist/${P}.patch.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS=""
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
-)
-
-src_prepare() {
- if [[ "${PV}" == *_p* ]] ; then
- #eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- eapply "${WORKDIR}"/
- fi
- default
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- #CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE="${S}" \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
- # don't delete '*.dll.a', needed for linking #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (#689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # https://bugs.gentoo.org/836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc for embedded/recovery. #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
deleted file mode 100644
index 5794b0aceb63..000000000000
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ /dev/null
@@ -1,354 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- ftp://ftp.invisible-island.net/${PN}/${MY_P}.tar.gz"
-
-if [[ "${PV}" == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g. https://invisible-mirror.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I create a rollup
- # patch, which consists of all changes from the release through the current date."
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20211026
- 20211030
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2
- https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2"
- else
- patch_date=
- for patch_date in "${PATCH_DATES[@]}" ; do
- SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
- SRC_URI+=" https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
- done
- unset patch_date
- fi
-
- #SRC_URI+=" https://dev.gentoo.org/~polynomial-c/dist/${P}.patch.xz"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
-)
-
-src_prepare() {
- if [[ "${PV}" == *_p* ]] ; then
- #eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- eapply "${WORKDIR}"/
- fi
- default
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- #CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE="${S}" \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- # We could possibly merge these two branches but opting to be
- # conservative when merging some of the Prefix changes.
-
- if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
- # We make 'tic$(x)' here, for Cygwin having x=".exe".
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs all PROGS='tic$(x)'
- else
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- # don't delete '*.dll.a', needed for linking #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (#689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc for embedded/recovery. #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-08-26 6:36 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-08-26 6:36 UTC (permalink / raw
To: gentoo-commits
commit: 60e01c45dba20077dc31fd1bf490806bdb87cd61
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Aug 26 06:35:11 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Aug 26 06:35:39 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=60e01c45
sys-libs/ncurses: add 6.3_p20220820
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 36 ++
sys-libs/ncurses/ncurses-6.3_p20220820-r1.ebuild | 426 +++++++++++++++++++++++
sys-libs/ncurses/ncurses-6.3_p20220820.ebuild | 424 ++++++++++++++++++++++
3 files changed, 886 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 3631d0295529..5bb87254f0a1 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -54,5 +54,41 @@ DIST ncurses-6.3-20220416.patch.gz 67896 BLAKE2B c95a993f51beb87bb9891bd0eee0872
DIST ncurses-6.3-20220416.patch.gz.asc 729 BLAKE2B 52ab1bfcac4b5d7b3733c399509ba4c0a6b9531c02a05846d39344488ba3a9196326a8126db225845a3ff1ca3fdd609fa1d9264583e7e57e28d2f4e3b58b4389 SHA512 c5a60d2ef9996c02264e6656a966f4be910a3acbee777a4ff2a5131efd156bdf1d32418a39d6e3c07fcbb59c75554d4cc1e7e9f84f5b59f69e7e4c17fafc749f
DIST ncurses-6.3-20220423.patch.gz 3394 BLAKE2B ac93810f1e826fc82de72a85effe5479576af14fa86e0dd08b8823b6f4652922f79242e9c867b1c864f0049c9e6d9864d6efc9282ab1e734dc316cac05655f4c SHA512 5dc87f70793d8319c5ee2f07c7f9432b1128e05f3aa2841a74deeaf294e46859f4198483dc783bb80e5e98f81f05cfef148df75a5abc5acfa69a9d6ad3abb702
DIST ncurses-6.3-20220423.patch.gz.asc 729 BLAKE2B 7225d28f7e61ae584183e98d8c93c7d470e96984aea4e462333f115c329a8c187927196447b8368949986d4b8c96086f5839fde5b442936e76ac797685ee109b SHA512 b0eecbdad448f193fb255bec2fa458d3fea972c181891882d8dc1e09cc325ecda38e98f2d410993f768f513f3a48b9be4b36dbb2919d82a778496b8ef2051565
+DIST ncurses-6.3-20220430.patch.gz 8987 BLAKE2B bd9d2b39670718277dd71b22fab41b311ef3732b4c3ccf77c796dafd24f7e0ae3a7a759340fa734425728b32ae6b4719b77862d64155fff906a9be01eda14b69 SHA512 7bab780d96404c7e368363ce8a41d5fa1668df9daed62753112541a1ee1da04ef6f3d8d3c06a7442b704c477bbff1b4544f419e532ec7bbfbddd630f66f138ce
+DIST ncurses-6.3-20220430.patch.gz.asc 729 BLAKE2B 8308cf7483087d516756e8a16dd29e5137efc35bce1cb73454b022302dfb77da92357aa0a716dccd0be83534a92467837d199deb1f7765da57323dd1cf95ed92 SHA512 c022fdae0880d56bee1fcd9076e64619bbdf09737484f89fab4c7c5d2c4b4fad236e42cc30c9557463cfd05a9c1d7b87bf3a5aa2904a79ba5a071463f3ac422d
+DIST ncurses-6.3-20220501.patch.gz 1920 BLAKE2B d4b3b23219d43bbaeb42fbe44034f5f0cfd2c24527ab8690f882f42dbd9855d4686a49734d3b2e5f1c6692847149bd6b62fd9ad9d3dd283156ea39441334fc65 SHA512 43b91e96aa067960aee3c42f65bd0ef91ad78360f30a25cb0637f96ad69d40ccf943c888d982521c6d1851fe4590692ecf6cdb4467757a33e901f53ea2e6eac0
+DIST ncurses-6.3-20220501.patch.gz.asc 729 BLAKE2B d32d3ecb5c6f91943179799eccfd536d7a57739dcac62dd7ae9bbf1b4a0491aa4aff7ae147e9e9353ad37bba89475f0d0a408cfa41b3812a48c42055240f1a6c SHA512 177951901957534f78cd2d71045ff8d9457fee426aea830739ece24d69689605c9f2b99be0fbb6d9ca34d6f5894a7bfb594faa2e7a69a87def44695988548375
+DIST ncurses-6.3-20220507.patch.gz 7625 BLAKE2B a7598b9b5b2f6d871e7eb8b11de39964954222a2837377e656e9d1f83002ef47478bf7776b54fc63a085de265f9be1b60d0b039ec77c5c3eb01107ff9158ecad SHA512 f688c38a809f60734efbf5bd07645faa4716c9b263d5edb284ae9a2f2cde5284b8698dd5a3988f433b969e9d26e74451f5c996ada2d7aa7760177d7f9c104f19
+DIST ncurses-6.3-20220507.patch.gz.asc 729 BLAKE2B 5653edd427ead8dc6540b45860380a8066bb3b8ba3015b0858e57c8696defdd99e6d19aa1a6ec269ddfea7a97630a901c4e29680a847070503d4659f9d533dd0 SHA512 f66ae09c989a229d7a8faf9bef7764de08f9a9cd9ffb8b35bfc7421cc8b942428bfdb8918c6f038d3f5e1697d1cdf49a02218b05175515b4e0bf29ed139c3199
+DIST ncurses-6.3-20220514.patch.gz 3612 BLAKE2B 73b151ba2e7bbac38067035bfb742d26f7d0e745ef176b7de56e00d930da3bf630030acede3fa6c63fbad41819e7b90f14848a1ea0d2a07473228dbd32ef7f4d SHA512 b69ac7b2469d7b97404a0dd5d57f6a06c88e139b0bf69627d8e1b65373b513544dfd1583d2fc95ed40ec131f49c90667b65ca2c513eccf785ddcc3b470b1dc17
+DIST ncurses-6.3-20220514.patch.gz.asc 729 BLAKE2B 6e2acb6ee12785aea5a3d881d6cbbfde0579ea4975d6a2b5a412e1fd8a6fa63df88c20013535e38da7f9fd8b2eddbade80da7a9d80a1e72229d89a042678836a SHA512 3cdd8d9ba80ceb3ac359265a8d8479ed9827c7abaa13562069dc2ed819b933b07a00bbf1a280551d30fc97e8d45bddcf0999d282521541244499873892618b94
+DIST ncurses-6.3-20220521.patch.gz 7405 BLAKE2B 788601d52671421c26fc4a6b4c8a5bcdd807a7d88c6636e24a11c70a32f35a7c50bd6f7166f9cc12e30134c49220070c432b3fa72004eb52e15912528d0d7aaf SHA512 58dd6f51e1d9bdb394cc8e86c8f14b953a0749cbd05ae4b114da482dc5c93878ae6fff6f8993194d9ff94461c6e9e38803418812f38d087729d42dff69c738fb
+DIST ncurses-6.3-20220521.patch.gz.asc 729 BLAKE2B 34daeb98a3cf36a0c6a471e617f07496fa173d1b57158d9052ebf94e11c65c61b26a8c884c83104cd4e9c62abdc0abf44ecc680c19751bec7c1d2bdd40fe4018 SHA512 a6d1a14032fab5de28df2efedcbc065a07d9c7da1eafa0efd380df42b479c7e9e3a73381fe7d1243e5abad82d3d01dad645b7876fcc16e723aea8d2c6542fb75
+DIST ncurses-6.3-20220529.patch.gz 5923 BLAKE2B 88f9b87a426b1384b62234b59b6b4655f6af0a1b0100e17c971e419d2ed1ec3a197b3a44b2b82d6550a62323f71efd0a0774df26bc653a7543f3646d88679470 SHA512 9f8c0b91f98c72e0892e9369e0f95aa56699b27d28d68febf746bac07fab75883461f363cdc6da0bf4c5b340287ba4e4c076b00c89550821990bba059f56d5f4
+DIST ncurses-6.3-20220529.patch.gz.asc 729 BLAKE2B af52d71d2b04b11404d5ff468869b7f633c367d10a9a7f43ca198b98fe255b032af837efafafd13dc8aebbfb5f919b453a7850c7d2dcc8b2f5375bbe3e0ee9e9 SHA512 d7aec9551acde75089a097b848125c5f4501751e58c800e40dd5b7234240c039b10de97ad2a70404f9b178a94ee4a3b8484a94fb6aca4599122c6a527161572e
+DIST ncurses-6.3-20220604.patch.gz 8200 BLAKE2B ee331e4467071d3f6655df009966f18aae2a25dca3d24272cedf54d7ee50cd2600cee71a835c11983b168b1dabe1193731cffcbab2773b650dd768f6dd8840c4 SHA512 2d0e2139ee9a43de6b4a10df5c44bcf1fed9919c3e254b9ca0d16fb37b0858e14cc10acbb0027522b0cb64f058d61b3aad3b8178fb6d634a4da57f30ed505e95
+DIST ncurses-6.3-20220604.patch.gz.asc 729 BLAKE2B b9a9b0d90b6f4a19a9aa9e006b6cf9dad0e927c02605af63c6c67a7025f9090a4b76fbb3e758f11e9a0c2e557ed65851ddbd7c831486c851e1d469d7dd16da8a SHA512 acd57c8b27fce2b04bdadcbf2ff82e34aafcdb72b9b2d3a913abf56467f78ce601c70aae93e4959269656adf5562799ba4d9e4aeb6965f4e57fc37577ffb64bf
+DIST ncurses-6.3-20220612.patch.gz 3474 BLAKE2B 67c4820457291e5f325119220631debef475fdf95d66c283616898cb454b281a73e5dee8404c1730b5ca10bc3521a2243f26dadce8c02f082ce1d0fa30c50189 SHA512 ccf89a98a095c6c498170b831cfeff24d1329d7f5007be82463699595e1c6dc01e0b458d456a5b8bda4e8faceced1a4d8f1c1bca7def54a3c6c6c2a2c43e36c6
+DIST ncurses-6.3-20220612.patch.gz.asc 729 BLAKE2B ba1dedfa9a4e83bc85716cb89507e73f44750f14bbe41fb439f764b71477d1dd4df600b4111f465aa80bf37adbea75359442eee48e70e90b8715d0f13bbe13ed SHA512 c8260b56019a3c44c7708b9b41e043871eb06a6e8847d085acbf0a901c39f025b51b41f6ade8863b3fa2460c66cc52571880420d454168e742479bbf7769c5c4
+DIST ncurses-6.3-20220618.patch.gz 5376 BLAKE2B b4ecfc699c0ad8d5f17f5883aee6a7b700495f8db151e68518ae567fc22afbc738796b99ddcd03c0e0f44036fca459d742a2069e794ab476b1183c970ec4c573 SHA512 1efada728e34ca7d4bf1e73bceea18e2334a27ff09872eadcc63988a9d6e6f1fdc5eab717d114805cc5610ec9b35ca00e54931d6503afd5543d035108c788148
+DIST ncurses-6.3-20220618.patch.gz.asc 729 BLAKE2B 9f3b6f6a077b20baa03bec84db9119061777aaa307613b2e22092c743772cc920a3621ac1b0216285f6ebd74737fc09221b8f8103d69dfbf334c5f53e6428054 SHA512 10efd950619625bc673ea88db1bc22d09ddf92910ba204e8bebd029f48f098ec8a35351f368881fcf890d8862fccc3d31b8ba73d1b32acc71722e777f4a3a3c4
+DIST ncurses-6.3-20220625.patch.gz 9730 BLAKE2B ac99b401c51b71df71dab8075d0ea29016a4b159e24773704598bdede7d91ad051633869a9bb0a42ad701995895f5acb711731c0954573c29bca0c9efd70bdf7 SHA512 dc707393050116c0351b132d4b20e9782e2e9920c31ffa101518714431a7a424b05ad2cc23bfc977ff96d4cb6199ab6e98e4204803370c0d557ee65cf84ef870
+DIST ncurses-6.3-20220625.patch.gz.asc 729 BLAKE2B 67790febe058f9e910ac69472ca91370dccdbdd986665f2f864cce50aa4350f77894b3aec3fd3a080d546a201f17d942e311bbee057ba6979ab7c56e1e2270dd SHA512 c4ed979bc34293ebe6e5b1dab099c8ab5f7d1d6dfdfe877e02b6182756b754706a827ac30a41c163582ca9d79a086df9c9ad6f09a55884dd04752adf37c4064c
+DIST ncurses-6.3-20220703.patch.gz 15771 BLAKE2B 8d0b406aee1b432e4a0cedbd68dd86d30d3116c303b72d7e6e4636e870b05f942ae8d8538a0f9118412350718683cbc014f98d5fc22914a14e2eeae740ad89f8 SHA512 68f4e7822077405ee29470a95aa66d284d2defd0e2ccdca12d58e417999b964657ae4170b54977430d859b840998042efe0f36ca41aab007062c53b409b2d467
+DIST ncurses-6.3-20220703.patch.gz.asc 729 BLAKE2B fb052729d5259ed6a7381566c400060a08af6caf6753cbfe82a6c5c2cfac1eaa82b59b6c533aad5ed06a6d527ef31f7ce46c49365386e1735bb5027f2f00d98f SHA512 ae9b8cc007f3b017a021430181ee92ef0dcbed1603c84b21148d0950b823a0cc50ec3ee2cc97880c24080bf8feb5a6152d104bffe39333466ee98cd07333e66d
+DIST ncurses-6.3-20220709.patch.gz 3567 BLAKE2B 97a8106bb64c3f32ca0984dfdbb8cb0b3e5822e726cd08826989cf09cf13ae0afe97b84b728620aef2bdf40f5ca54fd8e81fa354602cb80e98f73861f081408c SHA512 b35516f07614533c40559e3ce2346e51ed93f5c0f127ef076a96d4aa4bbb717f6456765d37034e8479a981194216cd0cd6c45e266715e46a155eb496653cc56c
+DIST ncurses-6.3-20220709.patch.gz.asc 729 BLAKE2B b2d4aa3c15c315a0f09fff8bb9c74595f28aac242fc8eba4bbff53c2d63fe5ca5e0e1356fb88c31df565ceff08065b2da29a961173a7f86c16ad849ba9212616 SHA512 faec18d2a7cf179e1c11dcd76406a790ae254da543ceb666bef2fa3d6a9d03c11ffec0c45495b40691567337895153ebffd6d7b3b30294d0ee707966b99bfdd3
+DIST ncurses-6.3-20220716.patch.gz 26266 BLAKE2B da5b2e610fd32a50694971ed3cd91d4e919d9ae1c7a7077269e8ffadda2717447eef41ff7c7bee42f5ab2363600a417306f40f8429ffeae318c9888e6dd66c38 SHA512 b591df49a00ac3ab717b01c53f7bae47b9aedf30dfeea549ab5a7bf9d366ad653c6d7d0a610ed70e3f3b3ebb18f7d1867ac95f0fb740aecf0343fe1639898230
+DIST ncurses-6.3-20220716.patch.gz.asc 729 BLAKE2B cb6da7708351abaf08ae815c46a994ff81c9b15e6ba7de3e98fe238b274ccfee4bbc31e5707b0cde0b018eaa8d708ae3d10d006eca81a33ca8480f55faec64bf SHA512 4b9da2b760ebc6d3731dc8e5974128ab88b9a170bc3d609b4656c420cdf3f2da6ae4952a9fb6700e926d6a90080caba6ec439fe79d5a9e33d8add31dc1a0b25f
+DIST ncurses-6.3-20220724.patch.gz 9302 BLAKE2B 4d54e2fb503f946608c8c6dcc53129a61a8d210a1db03a87f12e2acc3d8a423bba792929e1f845ffca2eb5041f27d399b685c697c53f65ddc340d9177675ed08 SHA512 eeb5e82bce1199ea4c968b5e8102ca84f1f9a88d5ea7707caf4b24ca51c76aaea0c721b8fb8c373e9e595e7621e320d63a2ed5f387aec777c119c3b87dbba06a
+DIST ncurses-6.3-20220724.patch.gz.asc 729 BLAKE2B 580e4c14f62defbe21e77936cc7f797c3fe42b78c8a451ebaa9c426c25d770d1ddf66447abdb3c703defb46bd436e4342c649b46999337cf11a80e57ddeae48d SHA512 e6c515dda6a9404247693f5f99efa2ab3297042e44a94da99d4e5d1e1b42c0966a874850c5f3e429e0466ca6ed910879a65f7e22dd5210bb3549f8c5a039e3ca
+DIST ncurses-6.3-20220729.patch.gz 85147 BLAKE2B b094798cc56db06e0d13bbffd073eff080822244039984b339a18cb2337d979b6b75acaf61b1392ad3818e1e5234ea274491b15ac2686064c8ad5ddb6453d885 SHA512 d8a515a46277de407cc7f58523fd99ec8d6cb9688740cad7ea743bd3610b62b5cb0fd4d8570bf1a83f7dd0f8887381aea9e4bdde084637f4cbe58ee206a2db4f
+DIST ncurses-6.3-20220729.patch.gz.asc 729 BLAKE2B 8d04bd485ad53f6c2cd18dd1966ddc76d6f1e6f43f9a30635732a49b249a3162d192159f90540ed8102fada9bc3d204f4209ba1a403bcfd7dacbc08cb93994f4 SHA512 927a97416043ce7be208549b7c4f61bae48328e6c04136c45555f95836f7ab538c2e8b850d0c7dee3e0b279597f1f6621fccda8fac7aef7ddb59d764e3052d60
+DIST ncurses-6.3-20220806.patch.gz 2491 BLAKE2B 7cae7ba5cec0e52a2f24088dc33191eb12ded64eddb753879b1edc49e81276f5d2aa205da851a21e6884d72b70e683a711b13faf69444fe06da03170cbf23653 SHA512 adc1a7e4c106e12cbac9bda467d8ec3d7dccbed2c67ec74faa32cf8cbbf5897e4c041ac02e94ecd8266de46aae9ce4060dceea224265a9c5532160ca9a494151
+DIST ncurses-6.3-20220806.patch.gz.asc 729 BLAKE2B fb8ce4c6bd63e0abd611c90c967efe749140fd811ea9ee91cda63343f1c9545ea8814e606742d00fedda2a461141d2dccec778a0ccece6e0213db1d7b636a0ff SHA512 215efa0da6980ded3f5b4d980cfed6268a6b5c157d4ce76e46cbce3055ac875bcbab5e605d4426e0c221316f5922b9e92b105af08686d4f798f88d400adeff3a
+DIST ncurses-6.3-20220813.patch.gz 11762 BLAKE2B e8a269aef28639deccf5db2fc2e649361dac134210bbba6b4e4e9fbbacae2900aa6cbbe00cead74a1f18ff0f00e2c54be607b17fb1e0cacfc0be95af5761dcf3 SHA512 57f5801bfe19922f67b3d65af60b5b9f3177955f26e08978594cc88681a1a3a465ee754548574b206ca607bd4c04f71cfd1c195ed396ea30d94f56ce580274e2
+DIST ncurses-6.3-20220813.patch.gz.asc 729 BLAKE2B e964291deb463dbce2dace974e2d7d6dffa8656d6b3f1b3f5651e0df8bae0bbb3edfcfdd02ef016bd0d452610bd329230ebc0bf5dd0d747fa88608a4f18ee73f SHA512 ff8e14a50165d0281b4a48d96a211e9c613d95ad20d78e261e1febbb17a9b8415351a38f594ce1c06707fada76b9a15ccbc5ba532cd4074e8a89d6571ade7918
+DIST ncurses-6.3-20220820.patch.gz 32018 BLAKE2B 14a29ee43c4d8df82a9f939ef4e028a482a8695feb89fdf6ec234410e3c1db105a4610f71f04c94acb322ff7d474196e4cb472ea5bbfdb7ce57e57c9a07c9139 SHA512 bdc458134e9c0c50c6e8aeeb44f05292f838d147186f2be5f8c872a43b376a66482ad7dec7aaa8a3facecd2c404ed5309cc744a6173b0570c6bfb0db40385619
+DIST ncurses-6.3-20220820.patch.gz.asc 729 BLAKE2B 93179103d5465b5ddff8513a383099bbf07993a1286a164b69d213c176cc39144fc8afb407fbbb2596d975bd7017b677f75609fe8ddaa3415f46cc73c5bdcbe3 SHA512 5e589d29903a2c6c1e85dfb64d7267e3528d65e49a7c4851318139142524bed4824dd787f980b2fbe8327f0b804ecea1ca94bbb6c7615fee9d993ea6d1568773
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220820-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220820-r1.ebuild
new file mode 100644
index 000000000000..ee652af5700d
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220820-r1.ebuild
@@ -0,0 +1,426 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+ else
+ patch_url=
+ my_patch_index=
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+ unset patch_url
+ unset my_patch_index
+ fi
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
+)
+
+src_prepare() {
+ if [[ ${PV} == *_p* ]] ; then
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ # If we have a rollup patch, use that instead of the individual ones.
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ else
+ eapply "${WORKDIR}"/
+ fi
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Should be fixed upstream soon:
+ # https://lists.gnu.org/archive/html/bug-ncurses/2022-08/msg00024.html
+ # bug #866398
+ sed -i -e 's/ld --verbose/${LD} --verbose/' configure || die
+ sed -i -e 's/pkg-config --version/${PKG_CONFIG} --version/' misc/gen-pkgconfig.in || die
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # bug #836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220820.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220820.ebuild
new file mode 100644
index 000000000000..d911bf424397
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220820.ebuild
@@ -0,0 +1,424 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+ 20220423
+ 20220430
+ 20220501
+ 20220507
+ 20220514
+ 20220521
+ 20220529
+ 20220604
+ 20220612
+ 20220618
+ 20220625
+ 20220703
+ 20220709
+ 20220716
+ 20220724
+ 20220729
+ 20220806
+ 20220813
+ 20220820
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+ else
+ patch_url=
+ my_patch_index=
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+ unset patch_url
+ unset my_patch_index
+ fi
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile +stack-realign static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
+)
+
+src_prepare() {
+ if [[ ${PV} == *_p* ]] ; then
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ # If we have a rollup patch, use that instead of the individual ones.
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ else
+ eapply "${WORKDIR}"/
+ fi
+ fi
+
+ default
+}
+
+src_configure() {
+ # bug #115036
+ unset TERMINFO
+
+ tc-export_build_env BUILD_{CC,CPP}
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+
+ # Should be fixed upstream soon:
+ # https://lists.gnu.org/archive/html/bug-ncurses/2022-08/msg00024.html
+ # bug #866398
+ sed -i -e 's/ld --verbose/${LD} --verbose/' configure || die
+ sed -i -e 's/pkg-config --version/${PKG_CONFIG} --version/' misc/gen-pkgconfig.in || die
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. bug #249363, bug #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ if [[ ${ABI} == x86 ]] ; then
+ # For compatibility with older binaries at slight performance cost.
+ # bug #616402
+ use stack-realign && append-flags -mstackrealign
+ fi
+
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ # bug #245374
+ keepdir /usr/share/terminfo
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-08-26 6:36 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-08-26 6:36 UTC (permalink / raw
To: gentoo-commits
commit: c0703fef2220d392cd1b35fa8b02a0fb09826563
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Aug 26 06:20:48 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Aug 26 06:35:39 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c0703fef
sys-libs/ncurses: don't call LD & pkg-config directly
Bug: https://lists.gnu.org/archive/html/bug-ncurses/2022-08/msg00024.html
Closes: https://bugs.gentoo.org/866398
Thanks-to: Allen Webb <allenwebb <AT> google.com>
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild | 16 +++++++++++-----
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 16 +++++++++++-----
2 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
index 1a8b50aab67f..f7f4f7c7d153 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
@@ -22,6 +22,10 @@ if [[ ${PV} == *_p* ]] ; then
# "At times (generally to mark a relatively stable point), I create a rollup
# patch, which consists of all changes from the release through the current date."
#
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
# This array should contain a list of all the snapshots since the last
# release if there's no megapatch available yet.
PATCH_DATES=(
@@ -120,6 +124,12 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+ # Should be fixed upstream soon:
+ # https://lists.gnu.org/archive/html/bug-ncurses/2022-08/msg00024.html
+ # bug #866398
+ sed -i -e 's/ld --verbose/${LD} --verbose/' configure || die
+ sed -i -e 's/pkg-config --version/${PKG_CONFIG} --version/' misc/gen-pkgconfig.in || die
+
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
# binaries in /usr/bin support both wide and narrow.
@@ -258,11 +268,7 @@ do_configure() {
[[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
fi
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. bug #545532
- #CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE="${S}" \
- econf "${conf[@]}" "$@"
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
}
src_compile() {
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index 4b4374096d7a..223791bd1371 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -22,6 +22,10 @@ if [[ ${PV} == *_p* ]] ; then
# "At times (generally to mark a relatively stable point), I create a rollup
# patch, which consists of all changes from the release through the current date."
#
+ # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
+ # the patches are considered to be acceptable to use after some testing. They
+ # are both for development but also bug fixes.
+ #
# This array should contain a list of all the snapshots since the last
# release if there's no megapatch available yet.
PATCH_DATES=(
@@ -120,6 +124,12 @@ src_configure() {
# bug #214642
BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
+ # Should be fixed upstream soon:
+ # https://lists.gnu.org/archive/html/bug-ncurses/2022-08/msg00024.html
+ # bug #866398
+ sed -i -e 's/ld --verbose/${LD} --verbose/' configure || die
+ sed -i -e 's/pkg-config --version/${PKG_CONFIG} --version/' misc/gen-pkgconfig.in || die
+
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
# binaries in /usr/bin support both wide and narrow.
@@ -258,11 +268,7 @@ do_configure() {
[[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
fi
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. bug #545532
- #CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE="${S}" \
- econf "${conf[@]}" "$@"
+ ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
}
src_compile() {
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-07-29 2:54 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-07-29 2:54 UTC (permalink / raw
To: gentoo-commits
commit: c4ca820258c43afc3e477128d417b491b919bc43
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Jul 29 02:53:31 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Jul 29 02:54:33 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c4ca8202
sys-libs/ncurses: add github upstream metadata
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/metadata.xml | 1 +
1 file changed, 1 insertion(+)
diff --git a/sys-libs/ncurses/metadata.xml b/sys-libs/ncurses/metadata.xml
index 51b044682ce5..481ccfc2e019 100644
--- a/sys-libs/ncurses/metadata.xml
+++ b/sys-libs/ncurses/metadata.xml
@@ -21,5 +21,6 @@
<upstream>
<changelog>https://invisible-island.net/ncurses/NEWS.html</changelog>
<remote-id type="cpe">cpe:/a:gnu:ncurses</remote-id>
+ <remote-id type="github">ThomasDickey/ncurses-snapshots</remote-id>
</upstream>
</pkgmetadata>
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-14 9:39 Jakov Smolić
0 siblings, 0 replies; 213+ messages in thread
From: Jakov Smolić @ 2022-05-14 9:39 UTC (permalink / raw
To: gentoo-commits
commit: a59133147f7a80d9740e2096a6a9d665d783624a
Author: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
AuthorDate: Sat May 14 09:39:22 2022 +0000
Commit: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
CommitDate: Sat May 14 09:39:22 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a5913314
sys-libs/ncurses: Stabilize 6.3_p20220423 arm64, #842648
Signed-off-by: Jakov Smolić <jsmolic <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index 4277e55b9752..338c3216c194 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-14 9:39 Jakov Smolić
0 siblings, 0 replies; 213+ messages in thread
From: Jakov Smolić @ 2022-05-14 9:39 UTC (permalink / raw
To: gentoo-commits
commit: da1a4bab22e284560a59abf24226783b31fa3732
Author: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
AuthorDate: Sat May 14 09:39:12 2022 +0000
Commit: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
CommitDate: Sat May 14 09:39:12 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=da1a4bab
sys-libs/ncurses: Stabilize 6.3_p20220423 x86, #842648
Signed-off-by: Jakov Smolić <jsmolic <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index 920b325b1c11..4277e55b9752 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-14 9:19 Jakov Smolić
0 siblings, 0 replies; 213+ messages in thread
From: Jakov Smolić @ 2022-05-14 9:19 UTC (permalink / raw
To: gentoo-commits
commit: e01b2dfb18f25e031c8270b0017ff413e37cf2bd
Author: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
AuthorDate: Sat May 14 09:19:29 2022 +0000
Commit: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
CommitDate: Sat May 14 09:19:29 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e01b2dfb
sys-libs/ncurses: Stabilize 6.3_p20220423 amd64, #842648
Signed-off-by: Jakov Smolić <jsmolic <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index 0202bb0b9dc6..920b325b1c11 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-14 9:18 Jakov Smolić
0 siblings, 0 replies; 213+ messages in thread
From: Jakov Smolić @ 2022-05-14 9:18 UTC (permalink / raw
To: gentoo-commits
commit: 1b9a9783ec44fe37e5b6d14855ae405ef02682da
Author: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
AuthorDate: Sat May 14 09:18:27 2022 +0000
Commit: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
CommitDate: Sat May 14 09:18:51 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1b9a9783
sys-libs/ncurses: Stabilize 6.3_p20220423 ppc64, #842648
Signed-off-by: Jakov Smolić <jsmolic <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index bf0679e769bd..cb914300cabe 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ~ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-14 9:18 Jakov Smolić
0 siblings, 0 replies; 213+ messages in thread
From: Jakov Smolić @ 2022-05-14 9:18 UTC (permalink / raw
To: gentoo-commits
commit: a868dc5ff5b56c81ce22e11fc7c0e6e6cb52e26d
Author: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
AuthorDate: Sat May 14 09:18:29 2022 +0000
Commit: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
CommitDate: Sat May 14 09:18:51 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a868dc5f
sys-libs/ncurses: Stabilize 6.3_p20220423 ppc, #842648
Signed-off-by: Jakov Smolić <jsmolic <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index cb914300cabe..9fdc669845c9 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ~ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-14 9:18 Jakov Smolić
0 siblings, 0 replies; 213+ messages in thread
From: Jakov Smolić @ 2022-05-14 9:18 UTC (permalink / raw
To: gentoo-commits
commit: 8bd0be9548dc70e9e09fbbd601aaad2d3b30078b
Author: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
AuthorDate: Sat May 14 09:18:30 2022 +0000
Commit: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
CommitDate: Sat May 14 09:18:52 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8bd0be95
sys-libs/ncurses: Stabilize 6.3_p20220423 arm, #842648
Signed-off-by: Jakov Smolić <jsmolic <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index 9fdc669845c9..0202bb0b9dc6 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-14 9:17 Arthur Zamarin
0 siblings, 0 replies; 213+ messages in thread
From: Arthur Zamarin @ 2022-05-14 9:17 UTC (permalink / raw
To: gentoo-commits
commit: 6fd55550f12141a35a69ba07b5259aaacb513ae7
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Sat May 14 09:17:36 2022 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Sat May 14 09:17:36 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6fd55550
sys-libs/ncurses: Stabilize 6.3_p20220423 hppa, #842648
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index 224dbd394842..bf0679e769bd 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-14 8:35 Jakov Smolić
0 siblings, 0 replies; 213+ messages in thread
From: Jakov Smolić @ 2022-05-14 8:35 UTC (permalink / raw
To: gentoo-commits
commit: 30b82cd4b77b57e0f14587a05f492d4f3b8790a2
Author: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
AuthorDate: Sat May 14 08:35:00 2022 +0000
Commit: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
CommitDate: Sat May 14 08:35:00 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=30b82cd4
sys-libs/ncurses: Stabilize 6.3_p20220423 sparc, #842648
Signed-off-by: Jakov Smolić <jsmolic <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index d8a998fbddf9..224dbd394842 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-08 9:02 WANG Xuerui
0 siblings, 0 replies; 213+ messages in thread
From: WANG Xuerui @ 2022-05-08 9:02 UTC (permalink / raw
To: gentoo-commits
commit: 8b919b8b43cd2af9ea7fb7bbbde4cd1951113740
Author: WANG Xuerui <xen0n <AT> gentoo <DOT> org>
AuthorDate: Sun May 8 08:19:47 2022 +0000
Commit: WANG Xuerui <xen0n <AT> gentoo <DOT> org>
CommitDate: Sun May 8 09:01:39 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8b919b8b
sys-libs/ncurses: keyword 6.3_p20220423 for ~loong
Signed-off-by: WANG Xuerui <xen0n <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index 00d373869b9a..d8a998fbddf9 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-08 9:02 WANG Xuerui
0 siblings, 0 replies; 213+ messages in thread
From: WANG Xuerui @ 2022-05-08 9:02 UTC (permalink / raw
To: gentoo-commits
commit: b943463244a7e79e3805b259e9df307a7e40d0bc
Author: WANG Xuerui <xen0n <AT> gentoo <DOT> org>
AuthorDate: Sun May 8 09:01:59 2022 +0000
Commit: WANG Xuerui <xen0n <AT> gentoo <DOT> org>
CommitDate: Sun May 8 09:01:59 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b9434632
sys-libs/ncurses: forward ~loong
Signed-off-by: WANG Xuerui <xen0n <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
index 1c25c4ffc2c5..8ef705fe2b52 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-03 17:52 Arthur Zamarin
0 siblings, 0 replies; 213+ messages in thread
From: Arthur Zamarin @ 2022-05-03 17:52 UTC (permalink / raw
To: gentoo-commits
commit: ef09d53b644d9c2649f78906d1f77cb9f6074d9b
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Tue May 3 17:52:20 2022 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Tue May 3 17:52:20 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ef09d53b
sys-libs/ncurses: Stabilize 6.3_p20211106 arm, #841398
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
index 95551f435240..5794b0aceb63 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -48,7 +48,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-03 2:47 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-05-03 2:47 UTC (permalink / raw
To: gentoo-commits
commit: a6b2461de765e25d009178b6c14a678eb6ed6cbf
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Tue May 3 02:46:48 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Tue May 3 02:46:48 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a6b2461d
sys-libs/ncurses: keyword 6.3_p20220423
Bug: https://bugs.gentoo.org/839351
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index 69087694ef94..00d373869b9a 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -75,7 +75,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-05-01 0:40 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-05-01 0:40 UTC (permalink / raw
To: gentoo-commits
commit: 291ae71944b90fe6b7d7ba501f61ab8c326812bc
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun May 1 00:39:58 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun May 1 00:39:58 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=291ae719
sys-libs/ncurses: Stabilize 6.3_p20211106 arm64, #841398
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
index c90ad9eec0fc..95551f435240 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -48,7 +48,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-29 19:21 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-04-29 19:21 UTC (permalink / raw
To: gentoo-commits
commit: 331f150fb855e2a89c8424a9ea53d1a29683b4d9
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Apr 29 19:20:08 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Apr 29 19:20:08 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=331f150f
sys-libs/ncurses: Stabilize 6.3_p20211106 ppc64, #841398
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
index f96462c360e7..c90ad9eec0fc 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -48,7 +48,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-29 19:21 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-04-29 19:21 UTC (permalink / raw
To: gentoo-commits
commit: 7e5a0d6a78772bdc3e43c9b1cfc50536af016ad7
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Apr 29 19:19:21 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Apr 29 19:19:21 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7e5a0d6a
sys-libs/ncurses: Stabilize 6.3_p20211106 ppc, #841398
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
index 18fd8f263cca..f96462c360e7 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -48,7 +48,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ~ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-29 8:14 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-04-29 8:14 UTC (permalink / raw
To: gentoo-commits
commit: f790382ded253b7dae62c7a90ee854bd9a57eaad
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Apr 29 08:14:41 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Apr 29 08:14:41 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f790382d
sys-libs/ncurses: Stabilize 6.3_p20211106 hppa, #841398
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
index 081ad0d318c9..18fd8f263cca 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -48,7 +48,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-29 6:05 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2022-04-29 6:05 UTC (permalink / raw
To: gentoo-commits
commit: b47f03361c0936980e92e663428be10e204292ff
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Fri Apr 29 06:05:30 2022 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Fri Apr 29 06:05:30 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b47f0336
sys-libs/ncurses: x86 stable wrt bug #841398
Package-Manager: Portage-3.0.30, Repoman-3.0.3
RepoMan-Options: --include-arches="x86"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
index 9ccf82d5cd47..081ad0d318c9 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -48,7 +48,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-29 6:04 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2022-04-29 6:04 UTC (permalink / raw
To: gentoo-commits
commit: 00208b34518decb4baa04f106b70411f5d8c38ff
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Fri Apr 29 06:04:46 2022 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Fri Apr 29 06:04:46 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=00208b34
sys-libs/ncurses: sparc stable wrt bug #841398
Package-Manager: Portage-3.0.30, Repoman-3.0.3
RepoMan-Options: --include-arches="sparc"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
index 8c5d3ff9aa15..9ccf82d5cd47 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -48,7 +48,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-29 6:04 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2022-04-29 6:04 UTC (permalink / raw
To: gentoo-commits
commit: 4d638dfe222a694e6ed09f74c714fb16e992a1c9
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Fri Apr 29 06:04:20 2022 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Fri Apr 29 06:04:20 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4d638dfe
sys-libs/ncurses: amd64 stable wrt bug #841398
Package-Manager: Portage-3.0.30, Repoman-3.0.3
RepoMan-Options: --include-arches="amd64"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
index cdbaabc97454..8c5d3ff9aa15 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -48,7 +48,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-28 0:55 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-04-28 0:55 UTC (permalink / raw
To: gentoo-commits
commit: 8ad4f0aa7753ff10ad3761c9b69f14c392fe1635
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Apr 28 00:55:06 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Apr 28 00:55:15 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8ad4f0aa
sys-libs/ncurses: modernise style a bit more
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild | 95 +++++++++++++-----------
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 94 ++++++++++++-----------
2 files changed, 100 insertions(+), 89 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
index 1d04632af4e3..1c25c4ffc2c5 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
@@ -80,8 +80,7 @@ IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
RDEPEND="${DEPEND}
!<=sys-libs/ncurses-5.9-r4:5
!<sys-libs/slang-2.3.2_pre23
@@ -93,10 +92,10 @@ S="${WORKDIR}/${MY_P}"
PATCHES=(
"${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
"${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
)
src_prepare() {
@@ -113,9 +112,13 @@ src_prepare() {
}
src_configure() {
- unset TERMINFO #115036
+ # bug #115036
+ unset TERMINFO
+
tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
@@ -132,7 +135,7 @@ src_configure() {
# When installing ncurses, we have to use a compatible version of tic.
# This comes up when cross-compiling, doing multilib builds, upgrading,
# or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
+ # the host version isn't available. bug #249363, bug #557598
if ! has_version -b "~sys-libs/${P}:0" ; then
local lbuildflags="-static"
@@ -179,9 +182,6 @@ do_configure() {
# src_install() ...
--with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
# Enable installation of .pc files.
--enable-pc-files
# This path is used to control where the .pc files are installed.
@@ -189,6 +189,9 @@ do_configure() {
# Now the rest of the various standard flags.
--with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
--without-hashed-db
$(use_with ada)
$(use_with cxx)
@@ -233,6 +236,7 @@ do_configure() {
else
conf+=( --without-{pthread,reentrant} )
fi
+
# Make sure each variant goes in a unique location.
if [[ ${target} == "ncurses" ]] ; then
# "ncurses" variant goes into "${EPREFIX}"/usr/include
@@ -249,7 +253,7 @@ do_configure() {
fi
# Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
+ # version of autotools. bug #545532
#CONFIG_SHELL=${EPREFIX}/bin/bash \
ECONF_SOURCE="${S}" \
econf "${conf[@]}" "$@"
@@ -293,6 +297,7 @@ do_compile() {
# in parallel. This is not really a perf hit since the source
# generation is quite small.
emake -j1 sources
+
# For some reason, sources depends on pc-files which depends on
# compiled libraries which depends on sources which ...
# Manually delete the pc-files file so the install step will
@@ -313,14 +318,15 @@ multilib_src_install() {
"${NCURSES_TARGETS[@]}" \
$(usex tinfo 'tinfow tinfo' '')
fi
- # don't delete '*.dll.a', needed for linking #631468
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
if ! use static-libs; then
find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
fi
# Build fails to create this ...
# -FIXME-
- # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
# Replace this hack with an official solution once we have one...
# -FIXME-
dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
@@ -330,46 +336,45 @@ multilib_src_install() {
# system. Technically, this could be also achieved
# via --disable-overwrite but it also moves headers implicitly,
# and we do not want to do this yet.
- # https://bugs.gentoo.org/836696
+ # bug #836696
rm "${ED}"/usr/$(get_libdir)/libcurses* || die
}
multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc for embedded/recovery. #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-# fi
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
use minimal && rm -r "${ED}"/usr/share/terminfo*
# Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
+ # bug #245374
+ keepdir /usr/share/terminfo
cd "${S}" || die
dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index bcfee98f91ee..69087694ef94 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -80,8 +80,7 @@ IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
+# Block the older ncurses that installed all files w/SLOT=5, bug #557472
RDEPEND="${DEPEND}
!<=sys-libs/ncurses-5.9-r4:5
!<sys-libs/slang-2.3.2_pre23
@@ -93,10 +92,10 @@ S="${WORKDIR}/${MY_P}"
PATCHES=(
"${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" # bug #192083, bug #383871
"${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" # bug #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" # bug #601426
)
src_prepare() {
@@ -113,9 +112,13 @@ src_prepare() {
}
src_configure() {
- unset TERMINFO #115036
+ # bug #115036
+ unset TERMINFO
+
tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # bug #214642
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
# Order matters here -- we want unicode/thread versions to come last so that the
@@ -132,7 +135,7 @@ src_configure() {
# When installing ncurses, we have to use a compatible version of tic.
# This comes up when cross-compiling, doing multilib builds, upgrading,
# or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
+ # the host version isn't available. bug #249363, bug #557598
if ! has_version -b "~sys-libs/${P}:0" ; then
local lbuildflags="-static"
@@ -179,9 +182,6 @@ do_configure() {
# src_install() ...
--with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
# Enable installation of .pc files.
--enable-pc-files
# This path is used to control where the .pc files are installed.
@@ -189,6 +189,9 @@ do_configure() {
# Now the rest of the various standard flags.
--with-shared
+ # (Originally disabled until bug #245417 is sorted out, but now
+ # just keeping it off for good, given nobody needed it until now
+ # (2022) and we're trying to phase out bdb.)
--without-hashed-db
$(use_with ada)
$(use_with cxx)
@@ -233,6 +236,7 @@ do_configure() {
else
conf+=( --without-{pthread,reentrant} )
fi
+
# Make sure each variant goes in a unique location.
if [[ ${target} == "ncurses" ]] ; then
# "ncurses" variant goes into "${EPREFIX}"/usr/include
@@ -249,7 +253,7 @@ do_configure() {
fi
# Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
+ # version of autotools. bug #545532
#CONFIG_SHELL=${EPREFIX}/bin/bash \
ECONF_SOURCE="${S}" \
econf "${conf[@]}" "$@"
@@ -293,6 +297,7 @@ do_compile() {
# in parallel. This is not really a perf hit since the source
# generation is quite small.
emake -j1 sources
+
# For some reason, sources depends on pc-files which depends on
# compiled libraries which depends on sources which ...
# Manually delete the pc-files file so the install step will
@@ -313,18 +318,20 @@ multilib_src_install() {
"${NCURSES_TARGETS[@]}" \
$(usex tinfo 'tinfow tinfo' '')
fi
+
if ! tc-is-static-only ; then
# Provide a link for -lcurses.
ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
fi
- # don't delete '*.dll.a', needed for linking #631468
+
+ # Don't delete '*.dll.a', needed for linking, bug #631468
if ! use static-libs; then
find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
fi
# Build fails to create this ...
# -FIXME-
- # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Ugly hackaround for riscv having two parts libdir (bug #689240)
# Replace this hack with an official solution once we have one...
# -FIXME-
dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
@@ -332,41 +339,40 @@ multilib_src_install() {
}
multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc for embedded/recovery. #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-# fi
+ # We need the basic terminfo files in /etc for embedded/recovery, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
use minimal && rm -r "${ED}"/usr/share/terminfo*
# Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
+ # bug #245374
+ keepdir /usr/share/terminfo
cd "${S}" || die
dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-28 0:55 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-04-28 0:55 UTC (permalink / raw
To: gentoo-commits
commit: 55e7e5fa8971cfd51af245c415b07913845dd2f4
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Apr 28 00:48:51 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Apr 28 00:55:14 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=55e7e5fa
sys-libs/ncurses: tidy up src_prepare
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild | 8 ++++++--
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 8 ++++++--
2 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
index 4b058013e9b3..1d04632af4e3 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
@@ -101,8 +101,12 @@ PATCHES=(
src_prepare() {
if [[ ${PV} == *_p* ]] ; then
- #eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- eapply "${WORKDIR}"/
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ # If we have a rollup patch, use that instead of the individual ones.
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ else
+ eapply "${WORKDIR}"/
+ fi
fi
default
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
index 7123b8237c1d..bcfee98f91ee 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -101,8 +101,12 @@ PATCHES=(
src_prepare() {
if [[ ${PV} == *_p* ]] ; then
- #eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- eapply "${WORKDIR}"/
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ # If we have a rollup patch, use that instead of the individual ones.
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ else
+ eapply "${WORKDIR}"/
+ fi
fi
default
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-28 0:46 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2022-04-28 0:46 UTC (permalink / raw
To: gentoo-commits
commit: 638b787bdb4744f8ea4357388110a5c7f226e3b5
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Apr 28 00:45:15 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Apr 28 00:46:37 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=638b787b
sys-libs/ncurses: add 6.3_p20220423{,-r1} (unkeyworded)
Includes FORTIFY_SOURCE=3 (glibc-2.35 + gcc 12+ or Clang 13(?)+ needed for that,
plus not on by default) and a buffer overflow fix too.
Includes -r1 w/ dropped curses symlink too.
Unkeyworded for now.
Bug: https://bugs.gentoo.org/839351
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 52 +++
sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild | 386 +++++++++++++++++++++++
sys-libs/ncurses/ncurses-6.3_p20220423.ebuild | 383 ++++++++++++++++++++++
3 files changed, 821 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 71621376f4c0..3631d0295529 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,6 +1,58 @@
DIST ncurses-6.2-20210619-patch.sh.bz2 836967 BLAKE2B f210bf25c33f11d67e54a6f416aae75f0a976880ea543408780fd3a8dc992ee8d9999bf15c925c79504be0f30ade4bbfaed763abedd2b2d6b35de65b353a6314 SHA512 b8392bf6c0b7570766ae31a043df311660201265dfe3e2e49425b1e2aa08c72030b5f5b6c7871532897596262c88a7192e3ff2adfdc618f1b9c13c22c373eeb3
DIST ncurses-6.2.tar.gz 3425862 BLAKE2B 6680cd7a369a4cb8234442a70869c283f0db6db9d7da1da2a7a5c519eb862a2c9b9411957d99f9ebb5089cad00b42e1ca6bc0784327461113df2eeaec695913c SHA512 4c1333dcc30e858e8a9525d4b9aefb60000cfc727bc4a1062bace06ffc4639ad9f6e54f6bdda0e3a0e5ea14de995f96b52b3327d9ec633608792c99a1e8d840d
DIST ncurses-6.3-20211026.patch.gz 117363 BLAKE2B 74c6c80271edc3b69d17c891436e48ee0579b3d16dd1bbd42f953be5b6ef07596343abd34f4d508b0cb371c1c0febfec12d65e938739892a617c8b141f599753 SHA512 25a99bc9cb7a18eb8fd16a0f887bae90c2551e0228b077d28f7217e58190f4b19a526350c999922f7394a1b749e834643c1bf5f339248b842717c146a3ec1df4
+DIST ncurses-6.3-20211026.patch.gz.asc 729 BLAKE2B 470aa4aad00d0dfa9924ca3247d720b720563bfe5a3b5c9571acb4c74a7b3fb55adbae6b0aa854eb0e29c56d7949fa1e3b6d959c25681f1b46c23c96a3c0e054 SHA512 276e8a09ee6fddf20be38b9d8a6f93cbafcec51ed17de375b9d2f4f6c34ff546fdbd81083f54aba1a5aaea5c2c691c25754dfca47568c5b70197437420dd2581
DIST ncurses-6.3-20211030.patch.gz 46304 BLAKE2B 6fa0f5223c97dc045117c208b92e75aad61638585506aeed0fa5cd6b215f67d212fc780e527f1281ae77063edb1ef9b3a3671b00d306fe322c3ca1b34c1d4d81 SHA512 90440af3959a17388999f07a3b40f770c5511bceda6a39d4c56f867dc5ae8494e49cfb700eb79e31422ebfd1b1990f6d7912083c688963139446f1e43e9d08c8
+DIST ncurses-6.3-20211030.patch.gz.asc 729 BLAKE2B af1715038a877ebe10660872bed82d536df410f8987508aca7ffed6d19fcdc95a2f5bd8f527b5a30580b07d7c770fade7bac2cfce3e20315faf472eaeb075d5f SHA512 526ff0ff7030cef711e92150fe0f2be7076bf8fe8c7b5fff9ee709c202e747c921479bf3efc2c3da8df2f0d7926de6b1571d03270e49bf64bc539193b0a3020d
DIST ncurses-6.3-20211106.patch.gz 3995 BLAKE2B fbacfd6bfbf64b2935d47f648bd74c93136ea8d17b51e218b80a24695b52246ce8ec01704a0636692bae72815c8b93dec8573570dfd126b19645ec90926e818a SHA512 799819ed01967387fdca4755ab44401f0dc90306f6f771c894ce6702c929e2ff87f45d3e1c2e683cc32bb01553f3332c3a7591a00b7a4bdff93da25307379bdc
+DIST ncurses-6.3-20211106.patch.gz.asc 729 BLAKE2B a60360000338be6f19e9769d901b03917a632d2da961523ea81191b44b04430d757ba0dea30a6b02e29b324dffdc447cf1fe729428138e0e71b138d84aed26b4 SHA512 3902c88633078ccfebda4ce67dbf6e4ccf0e8be296a0193d07ccf51b56dd75c34f326f885330c90d81aa0d487aad513eb797c3916aba682a8ed6673b51483c84
+DIST ncurses-6.3-20211113.patch.gz 116573 BLAKE2B 5c0926fa97628e1e15f10f47e3c668d5867c066b03b80ec1be2cada6a48ec02aca81dbf997718fc1d9bbdd36016de62981eb19e875aac4b4c531c90c0a2f1c48 SHA512 2225859cb6770d31cd5d147f1b767c61ad28534542b64e3e22a9630977f2cabcdad11313d533c0c462f53a6e0dc17cd80985ca759d796658775676720e50998a
+DIST ncurses-6.3-20211113.patch.gz.asc 729 BLAKE2B 16e9645ea71db7afa7b3a52831b04920e9d7d960bfef074361ac77264a28b9bd95a6240e1e3e2e96373615f2915a35acf6d3c21b63a6c4130fd35bf3c65dbbe2 SHA512 7d5b8740512b31bc5b6ace1cc9ebbdf36f2092bc88aa3994f757085ac2add814648daa70c18410a4433fb6327115d9b1762eaf93f9d337de3e10a9707f411f1f
+DIST ncurses-6.3-20211115.patch.gz 2259 BLAKE2B bf3ecd64919707bdf25b1db20d99c68d47d122406bcc4884c370d9b13c3df4bd8fd5e913d3f5ac7dcfbec58f4910d2d42176c32d879095c45e2513cc4c933a22 SHA512 7571da910f51152200d2fa76659d1a253ceb7022c00bfa587188c7ad1f6896ed836eafa3e724933fe3c4bfc03aaf6ac1d51102c5db1a3e37f944f3b15d50f9db
+DIST ncurses-6.3-20211115.patch.gz.asc 729 BLAKE2B 8b853439790674b22029d4d71a65b29019bfc1d2109b44cc2d08a08cc396bd5b784ca8169e4a8edc1fc4e9a08611b89c50f9e3a18781aef0b5a56ea20b335117 SHA512 5427ac588426bba6e9b579faa6c1e1b17839fe2e3327dcd76ac187a46792693da327b279eef35c43e39b08f755cf930e7efe03a753d8b8ba326c039408131d60
+DIST ncurses-6.3-20211120.patch.gz 122226 BLAKE2B 390bb1bee13b83d282ce31a26327bf46000d74851f5d2a363e04915ef73ca5ffaf365255d6696b0c4d10fbb1fb124baa07fa0b841f378b018a37ac1a741aa579 SHA512 37eca2eb6478332e095c139eaa0ff740b8bdf82da4a1c0e990010ffaa3385b38a1c6956ff3f1dc182894384d9face8c265d35faa3ffd0a517c404890b51d177e
+DIST ncurses-6.3-20211120.patch.gz.asc 729 BLAKE2B dd03ec2ae80bfb83ebce5b55410914ce3d5015da2933984b04d2e4d6170b42cccf109bbe2312b4d77c83933f9bad9af7f19e8b1ff23f3791b99238c2d0834891 SHA512 5693a92e631718c6f2bc791e994f5e225a70cd6eab9df5b5da2c180b96480e77c0e5485f48653cffdfe267048175523b7dc42414083500310fb87554043dd19c
+DIST ncurses-6.3-20211127.patch.gz 38780 BLAKE2B b9e6e1c065c7aa97809e65a0af2bb398e7d2ed17c95c35bc4320451ad47efd1a292dfb74d2ff53ff12a68c9cabd6464fe7be40e389c35c4f99ebdc66ec7ad77f SHA512 e2971c8606173da0e044630622506fdef4b83e968b2c501c4e1db9b0b4e54cf93d76570fdacf0edeff986d9cdd728471050c9365881092817b54bd83917fdb25
+DIST ncurses-6.3-20211127.patch.gz.asc 729 BLAKE2B 11ccba2a3310a70b228d0df1b088501ba30f159878662791ce3a294b48e0819c6619dff8763590cdfd74d6e2dc24a5897705808e6da64510d49eea7889e3b1a0 SHA512 8949ab4d8e6b124769bac40becf2853bc0f370814fdd013c7b0c638b9008c1628e5b7cc372f95731549a5cb184ac6d80172f985e114d186a30cebd67268dae61
+DIST ncurses-6.3-20211204.patch.gz 29875 BLAKE2B ce2c8ada23ea01d22baa8d68bb34bfebd3913ce8dd787f1a3825eb07c7a8d83dfe4317e755fc2a16469f6936022a2c45155ea5e3aaf9d01a5caaf124cf1eede2 SHA512 30454d917631cfad474191dbb7e1318e5370e829cab4b63470f51e9c13c953975d999a41cb10a35dfabcf038fe666247d32659f597a6e8a8bac572a4fe6b3fd6
+DIST ncurses-6.3-20211204.patch.gz.asc 729 BLAKE2B b6cc88dd5ac8edc1afa60baccb8af84daf00d8806822f04284c78f0ed132f7fcd839f4d39bc62ff58d48bd3fbf504baab9bb9815a4c236f0bbdbcf23798be71e SHA512 5dbbd09311d4f5bcf1697373945db190925c0d7d1e0aa3d65f83608e34a9c407a74df8553581ec5a49d634e94261ba8f5fac26dbe9718177df173fc4e52543e2
+DIST ncurses-6.3-20211211.patch.gz 5277 BLAKE2B be82f85d49e28a25ef8c26dda4355ac111fab68917d157af05289b518a669e7e42a1f6bf65a813bb3d0747e56cd2723ee1dfa28dc02501ae8350ac74e01c1b39 SHA512 c57157bc401190867aad64f4503e438777606786814de32b38e44df6d73733b91b5c5ca4e173035dd5ccfddbdca2814fdad7a1781f6a144adae4d96d2c6e7e78
+DIST ncurses-6.3-20211211.patch.gz.asc 729 BLAKE2B 01ba5f095250a316fdf30f3f15032804db351c5995dda85820e67cacbb62a0d8a750c4bdfbe6deb9654f01ef124a78ef89b9fe41e4b494561ffa5a79f243c72e SHA512 17973f01a765d121597b3cff6fed2feffe5ff895c4589ea08a86134ba3b9913742f740deba9369d2e7aa89aa033c1925b4d49518d188cae57ba83ff5a3668225
+DIST ncurses-6.3-20211219.patch.gz 6874 BLAKE2B a5b98f1a0fc7b31340713f5aa2a0106184e270ac2312851a5a92ff6947d70d86e9af849a3830f5306c17bad58fbda4640b4cc15715b23cb6e2411b7f86ba0282 SHA512 c38b31e133d336fb50936cc176a04fa076c197c6e6fe56beb840002d6ac65c76c4a3d1f2506122b1095d680ce254a886b52c56194f2fe586edf69355d68f2a45
+DIST ncurses-6.3-20211219.patch.gz.asc 729 BLAKE2B 2ff431a67bf8ac671ec330c8ea7c61e6467cf2c7acb7760ebe035b72a05e675b1945e891d55943f1dfe0fed0c29f91731094ae5d198e11af6d9d0a21534282ed SHA512 7d6a3a0e4a51c885fa2ef37c71f089b7493daa57a59cb02188bef64597657fabb7dc20fce1d55bbd4c368987becdc1dcb89cdce14b45576ce7657522046d8b2b
+DIST ncurses-6.3-20211225.patch.gz 205972 BLAKE2B 34ea7243f7f8ecff69e60a90fc1a0a9b9d69b4e87227714d7ae8f603c3b16f82466c96987e7696fbb45005dbaa2c732f85a79b4fc39a61f8555bac661f27ba53 SHA512 1c2c1687233cfc72cf050883bbee60d88ed179e0fa865dd752985e83add68b5278e498b2e9bd2658b00ef7791e04fc456f43e82fcbb8cb4ed46365bff3c336d8
+DIST ncurses-6.3-20211225.patch.gz.asc 729 BLAKE2B efc0b1a5cf93c71912ab6a7232ddc7c50d2369a955992e6e60f8d86e56aee3cf539c82e082951d5b6215bbde835219588619ae95525b08a54486d3c75ffe3658 SHA512 f2bb524f604883858015a23fbeb698db8483afb88012b3271bfa10935fc71845088b7b5c9fcf950ea9fc2aaa0e2baa4147a8d9f4e42902d3be9f424ce01f7ad4
+DIST ncurses-6.3-20220101.patch.gz 11576 BLAKE2B 76b2ff3bb028bd6ebbcfd0f79e20aa5fd06806279c569e2640e9b6de83899913ef8755c37888a65cdce3ee701db2ef704181de6d36417abfc158fe651d5c0e68 SHA512 07dbf0def9d21a6b701f4f3d18a8f82d5115f8e4d826a57bf5914534029c79aad2b539f60ab5b1795886894f490a9f604acddce3a77cdd474d80db5428568b97
+DIST ncurses-6.3-20220101.patch.gz.asc 729 BLAKE2B c86a9999b42fb312c1452f619269bdc5c1293c19cb8adb2436b5670acf706800a951d266f2c1b78caf1ab10608933e99fc49e761eaef1a658b0ed35fc4816ea9 SHA512 1ddbcdef1e7b5a04dbf0a7b371cd775337ca3ac39247f5215e5c6d099d4758367b98c28a6d5568a08bdcdcb7ff29a7ef2936b12b431d9a0e00eaad2cc78976d4
+DIST ncurses-6.3-20220115.patch.gz 294400 BLAKE2B 97293251ae0c6322df5e4663fca4991e5a1978ad63f1d7d015027dfd6e5dc5e1a52d46683199da2efb5f7f18e7b5424ff7702d34d0dba5eb4ba83dbd85039078 SHA512 0e42e298fa22bf2a463870576ac697ae71320eacfd3ee41bc4b41a229f05603cbdf52bd4e7b724de83c41c2587469deb1e2f876a5e6eabe1df1799263f5c1a87
+DIST ncurses-6.3-20220115.patch.gz.asc 729 BLAKE2B d1288c86c4fdd9890dc8654f81e2e8c956412173a03f26f0018234d6bad6fae6043df8f65d1bf1942c8ea8de68f631d6cd6e8741c932277b85fe9735ec9414a7 SHA512 cf3aafd09105362d8c896d3de73a49ed1f19818a78bd2f2a9f1f8ece218dc01159e65793ef4010d5f5a850fa9057f4f2723d745e6fbca7530a4e8c468005bd41
+DIST ncurses-6.3-20220122.patch.gz 106624 BLAKE2B 33d12cec7df1553cd2c4c3e09152f53ef5b8e86a4cf9bb5afadcc92065f93bd0734f761be088f13f150ec9e8e4d7d8159ea22b2c2bf0bec824e25078d2ea9251 SHA512 c585ba9f3c27314cfb9097d8cf9feb1653014d676670f1644cefffb347ef70a7172ca56c20015531c7117eb23909d55815a295850738499e58c4d5306ec5d747
+DIST ncurses-6.3-20220122.patch.gz.asc 729 BLAKE2B fb8f0e236ec7582b1adfa9c7facb959fe1b88ffcee494308dec6fb4ece6e518d1aae3af5c52e0b82f59660e60c3c01dd56037e1b107e25240a12a03f4300f91a SHA512 609c55b3028a89d4ff09774279435bad58d8d0e179042dafe2c61092f32b5edcad2397cdd8a6eeb7ab61322064fd1b24d8b6b960adc6ede0b7254c3b12284fe1
+DIST ncurses-6.3-20220129.patch.gz 117854 BLAKE2B 1dce0288609407e6bc803ffc8f61b0c33f8a1dcf1c6c4303cd4c730741e4f0b68b7fb7e7b79c1a29dc1c7cde7f2e5aa7b615402b13ee3af7a7c28cae1ce804d0 SHA512 3f573b645f67279e0394352456d844d289be89e2ca70d832d24fe945ce2e6b017273eb305171e5a704492ac3d600de05e5e6c1e268a939bea4b5cfd74b292753
+DIST ncurses-6.3-20220129.patch.gz.asc 729 BLAKE2B a6b8fa01d3a5c8c3f4055757ac23a2700e5b8627214f8606f25c82f560f1637ff2db70a872f43a9aa25b64e3efb3c98bb9980b0673a35ca13073c4f9d5063fa4 SHA512 b2906c5d27312df3c6e79ab486753420ab83e9562d1b3d35971b5ed7f6d15a1ad7f8a3b18bafe3e5e8c6ef9b09d32dade373269ebfbbe9ce5d2b417e0848a5d9
+DIST ncurses-6.3-20220205.patch.gz 48085 BLAKE2B 1d1bd94138379e1947941c87c1ef6cb76e1e5dcf49e04985b59f1d111a524976629f94ece79f9ec93a2c773f8dda9bde0b90b1d34ed1ec51a573d4f1587cad86 SHA512 166f3f6687f52c18169d67e5cd7338aee7ec283898c522e964a4d9f59b20a5754d6865e0268c5297ef7c4b7fc34b8607f00129aecb5b7ab616788a0b98f674b2
+DIST ncurses-6.3-20220205.patch.gz.asc 729 BLAKE2B cace085a89847d3d19eab5049c64afb187b1419dd7ea6ac1e9cd8c037aa83897788cbddc3e97ebe15d32f09e1c5156664e5d3af5727edf6ba6b739025582f984 SHA512 c2176c35fe7044ba82869a928c614faec3a894521b3becbe37277ab95cc5615fb1b33b935d6394a4f75dad15015e5203bcb29001f68fa05420289145729638b3
+DIST ncurses-6.3-20220212.patch.gz 41501 BLAKE2B a0257b9a740a14090e46e85b67a59e754018e77d6484b30eec6f5a3fa84dddf329078b94d4425800ee45a85a31a9c47b1ccc25ed32fdc2f433465c3238e3c8e7 SHA512 1f596ad2f806411a2e89ebc8b74e9d44754fcdd3baa0c727fe610121fe64eb27e1c35871545dd7ab743930e1c49c2d96581aed0a0b37d0a33d2ee7c590c0c42e
+DIST ncurses-6.3-20220212.patch.gz.asc 729 BLAKE2B ed7466b3294baeda59fdd56df93583662a257efb3434ff2817d31994cd5218605ccd535e95ce668f741693fec9fcc5f39223dd67884668aee777bfc9eeff55ce SHA512 3394f9c37a0a1d7e19becb023542534c734f15f030ff725ba54ae010417898be2935d6820f7f7f6d76a0abc3663a9a7f4ccf98a9571c03123f4ba8321ea5c9c1
+DIST ncurses-6.3-20220219.patch.gz 6845 BLAKE2B 660191d5561af0ca763ba8377899ae5793a48e73fec27ef5d9ae00e28cb53edbe96c6ee0480bc1de321ec19cbc8c02f7330861811f3a000b603ce6bdd9921070 SHA512 41d9e29f4f673a6c930f8637dbbf7c55f427aad28088f96ddab824b560b462015dcc21a371551a087adb44dde4797abe9cde2ea07e2537e81216b17b330a14e7
+DIST ncurses-6.3-20220219.patch.gz.asc 729 BLAKE2B e216aa89dbe7d7ea0bafa6d91aca090ac316844ec6d1b1d36da8452bc623e3897722f19b3fb1cc89174ad1aa41a6e8fab4d1b761081090c2bbf338fa027a534d SHA512 555f22dfb585e7b93727f20e46fb6fa77cb633bafdfe6ca3cf3bfabd462a4761f23bb341fbb25c1518b8d9652388f23d671e15f7acecd01755c55d5fa48d3e67
+DIST ncurses-6.3-20220226.patch.gz 5429 BLAKE2B fd0b50218992daf8e5228cf77fe72db651bba494d9699d0057e0e676fc01b699ff4d8f0fb9636faac5ea3fc1936d59d27403a5a5e89f6aa3c42f7c101d9dcb35 SHA512 0d77a955c1f24b7ba58d830cf5c256bcf5946f535b29077484e4ce4ae871a0803fc0db70c66d177ad427da797f7ae30b9a08ff56cd6d0b5f37dd3f231bd67b35
+DIST ncurses-6.3-20220226.patch.gz.asc 729 BLAKE2B e1b83208bf9e9ca9558b3e93f824766765159fcf3b5b4c7a4d92415229a8ef653eb1503446cc5fc8088a354e08cf6fbefb5fcc28e995c8c1718dc77b59552267 SHA512 972f65a645490ef425a6f7314f859cbf8d1aefe5ce6b0847adad3a457d8fd5634af64becb6542e477d14bdacc72aca00fef213c3d5b51f68258ebaef876aec86
+DIST ncurses-6.3-20220305.patch.gz 3732 BLAKE2B b756ad0d8831c2f0eff78dabf1b45adec7888dedc846a91a94cef739c10057f87bbbe7984a4758aa82a8c146d7cc9eeb356b7321bf529fd54480fe334e0ec608 SHA512 4ced572ac32afc2676896e79acac9145c7b138dafa8ebe0c29b2355bf65169a68df3be8fd273b7b957931f98f39ab0f20ada6081be5e11045d32f91f055116c6
+DIST ncurses-6.3-20220305.patch.gz.asc 729 BLAKE2B ef22a7429cffe8dcfebdbd6e339684b7a96c437e3d0bc3ba3eb02c4e8a537909f14306a4d7ce2d0f0752e1a02975b11ad04aabf27a6ba0aa99f4f486b1fe4826 SHA512 68a73ba690722ecca38099521fd9396e7c46dfab9c1a090f0cb7d1a18480bf027a6b7a5e3f1b0ab92a7ad29b05df1c9f7d4c197e13b9e916b6fcb0c54a472e4e
+DIST ncurses-6.3-20220312.patch.gz 3659 BLAKE2B 8ec667f1a615b7fdaf7aeef1c14145ce4c90ad75c8acc474d160c61bf85b13a10fbb6c248a2659dba94db50a9db866c002c2ff429a3bdab8124b1d9b28031364 SHA512 1565f364fa694e2b84f73e9d6ad716b18cdde4f18aeb9bcee8d78d59ed9e995968f7ecea7d307e6738943208ed17bcd459b6b30cc85fa0f7e8ff2c64e2a7b385
+DIST ncurses-6.3-20220312.patch.gz.asc 729 BLAKE2B e5b4cd10b313c7d7f61e3251fddc2c85fbd920b2855d8b9ecb585a1d3acbd5b1bb3a1dcf5043bcb807ab9ecb03c9e711e1625a86ae6adcf6f41b37f8b71b0d21 SHA512 ca819f78d6b5b4c9bfd9e536c6e8ec4ccd9d6c3ad3f00e1e85f5e646e2e5d2b30e8c72ffe91f789a9b8f2268b89f4fbc07798b433a202b263673a187c74774c9
+DIST ncurses-6.3-20220319.patch.gz 3975 BLAKE2B eb9a9896704463e64c0b46721322190cdaaf1bf6d30f3a8b4ef2d815a5cba5dc0ca84674404ef720d0d861cf724b265988e187fec94096f6926633da62933829 SHA512 f642180bc13bc26d8befa48145a66d36f064cd5a4c5891e0eb5e9e463cd7a446280040ce04aa8d7bedacb06d060916fc32ca7f6f66010ee6fbf95c4a367e2c1f
+DIST ncurses-6.3-20220319.patch.gz.asc 729 BLAKE2B e6f763a035db48bdfb1bb7c05aa30f91c0e693efebb0f74eebc696a0f5b4acba3655112af6bf9b0d5bb502a5d67dd3416b4f26dc3be5cb775692f1c958aaa911 SHA512 e07dce52dc16d73dcddfcb982b40cb9fb4ff60097e704e9dc56604262cb30eabf2283a4b436e78a8ddf6abca69cc3fef5a2d93d9145658ad4a36022e2b053406
+DIST ncurses-6.3-20220326.patch.gz 4163 BLAKE2B 20f83d6491dfe4c6833c72582dbddc5f69f4356f78251989afc7e689a2f261f477a8db17cea7c084ab798d3ead34dd1204a595e4718255a6c4a3a9735c36b217 SHA512 62210e6bdf5577fea31e2d793d15ba55bf1c89a855e02ebfe82bc918dec3423f70c49756b08a8fbf1a7cd4311ff09a2751f76a4bb7b2924a3eacc96c2ea25634
+DIST ncurses-6.3-20220326.patch.gz.asc 729 BLAKE2B 65254b2f56dd831be92fa8e89359bd52252dc7959a16d99888c372722bf533a7c2cc3b285452af5bc33f0478bb2f143ed74b5f0b57ad9cc74626b4902f0ccdbc SHA512 a60b780f39424b3f712e5fd81fe397b1eaa476026b497c50edd5c6e460eaf320ea9412a0d0ce122bb7bb3cdfe2f473bad5a0bbf923a22cc1bcd04c621aa5c023
+DIST ncurses-6.3-20220402.patch.gz 11483 BLAKE2B 3210094fb4be4d7c2b751ce3d7b4efee71db0c420f0159db846efcd0ae6e85673069b7c39b943346a3b1a1aeda247493aba6bf832eb192fd3729a9585d0c9a66 SHA512 f8ce6ab6ef5df746ecbc6286c5b46ec53ab0f3fed831878f693c8afe49b34f3f2769f2d3078b81799952f7905bf18217069fce7dd52d3126b7e4dc2ae84f5443
+DIST ncurses-6.3-20220402.patch.gz.asc 729 BLAKE2B 0ab44b4bbf10aa0c67dc1022012b1e156c9ce9c57214c5f92e7b3714cdccead69e0a869b9247b799797680f896dd8e86b3a2ca2e9587f5cc11250711ab36006f SHA512 299b5b7c337f95b0621571261b23d3110c963ed0f584f145238049caad52ba325d6982e138545d02041e297cf78f3f1a0f8d08f9162bb7b61885870382df2e06
+DIST ncurses-6.3-20220409.patch.gz 22728 BLAKE2B 7b8514a9fc8b8ddbf5cbf1f6b0cb45895808f6226db726c206ed8490c3abccbf8a8d49e6bcfdcad806414d8aa0d4fce89faac43c60a38ecf71e613ff01f67224 SHA512 1dde730b7fa12efeb2bc7b98012f3e5529630f0aabde2d877046ef85d541dafb5d64488747ddb559f97a3f25d1ec5f716815f9e6c1ce100f4f308bfa86501d20
+DIST ncurses-6.3-20220409.patch.gz.asc 729 BLAKE2B 9d5321cd1990c68ac812691713d941d467dcd2f95c93f2488cf212d4162415b615397546bc397a2907f1b6ae38907dea6f72e3012ecdafa0054a91d59a94ca64 SHA512 8db2631d35ee1d7d07d906fa194e499ed8239acfbfd215e192a2382b1cd998a9ee3d0ad971aab43edb5e91cdbb2a772835a42cf0645b2541c5c7dab9bf4adf74
+DIST ncurses-6.3-20220416.patch.gz 67896 BLAKE2B c95a993f51beb87bb9891bd0eee08729795a583df50c66df8265cdd5c4adbef83b9fc0339c71aa5137408fe10fa15b0ba4028d5539a0ac66df06c0c1d72e8359 SHA512 2686ed16f5103d76c92cfa4943a8f82d8bc414db074c1c7fb73810b49c6d1d0103988611edf36715d5be24891d0bb2c97ceb08dc4111d0900b5dba6fac12af0a
+DIST ncurses-6.3-20220416.patch.gz.asc 729 BLAKE2B 52ab1bfcac4b5d7b3733c399509ba4c0a6b9531c02a05846d39344488ba3a9196326a8126db225845a3ff1ca3fdd609fa1d9264583e7e57e28d2f4e3b58b4389 SHA512 c5a60d2ef9996c02264e6656a966f4be910a3acbee777a4ff2a5131efd156bdf1d32418a39d6e3c07fcbb59c75554d4cc1e7e9f84f5b59f69e7e4c17fafc749f
+DIST ncurses-6.3-20220423.patch.gz 3394 BLAKE2B ac93810f1e826fc82de72a85effe5479576af14fa86e0dd08b8823b6f4652922f79242e9c867b1c864f0049c9e6d9864d6efc9282ab1e734dc316cac05655f4c SHA512 5dc87f70793d8319c5ee2f07c7f9432b1128e05f3aa2841a74deeaf294e46859f4198483dc783bb80e5e98f81f05cfef148df75a5abc5acfa69a9d6ad3abb702
+DIST ncurses-6.3-20220423.patch.gz.asc 729 BLAKE2B 7225d28f7e61ae584183e98d8c93c7d470e96984aea4e462333f115c329a8c187927196447b8368949986d4b8c96086f5839fde5b442936e76ac797685ee109b SHA512 b0eecbdad448f193fb255bec2fa458d3fea972c181891882d8dc1e09cc325ecda38e98f2d410993f768f513f3a48b9be4b36dbb2919d82a778496b8ef2051565
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
+DIST ncurses-6.3.tar.gz.sig 438 BLAKE2B d7f9852292110fe7a048a9e38611ea06564b5142cb4cbeb8d99bba752d5df8eeffa3b57e5ca315c14024520bc008b30650e99669c995dca05a798399a0c85d39 SHA512 b9a2a25e0b1854c272bf89c610c81fc0ba061f0296eca5c0079a79cfe310e44eb16c46eb5a0dd018f1ca9114d569c9d5087a2b8e60b0344f1eb97f7c5addafc6
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
new file mode 100644
index 000000000000..4b058013e9b3
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423-r1.ebuild
@@ -0,0 +1,386 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+ else
+ patch_url=
+ my_patch_index=
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+ unset patch_url
+ unset my_patch_index
+ fi
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ if [[ ${PV} == *_p* ]] ; then
+ #eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ eapply "${WORKDIR}"/
+ fi
+
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ #CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # https://bugs.gentoo.org/836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
diff --git a/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
new file mode 100644
index 000000000000..7123b8237c1d
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20220423.ebuild
@@ -0,0 +1,383 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc
+inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="Console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
+ verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )"
+
+if [[ ${PV} == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ 20211106
+ 20211113
+ 20211115
+ 20211120
+ 20211127
+ 20211204
+ 20211211
+ 20211219
+ 20211225
+ 20220101
+ 20220115
+ 20220122
+ 20220129
+ 20220205
+ 20220212
+ 20220219
+ 20220226
+ 20220305
+ 20220312
+ 20220319
+ 20220326
+ 20220402
+ 20220409
+ 20220416
+
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz"
+ SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc"
+ else
+ patch_url=
+ my_patch_index=
+ for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do
+ patch_url="$(printf "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" ${PATCH_DATES[${my_patch_index}]}.patch.gz)"
+ SRC_URI+=" ${patch_url}"
+ SRC_URI+=" verify-sig? ( ${patch_url}.asc )"
+ done
+ unset patch_url
+ unset my_patch_index
+ fi
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ if [[ ${PV} == *_p* ]] ; then
+ #eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ eapply "${WORKDIR}"/
+ fi
+
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ #CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2022-04-06 18:08 David Seifert
0 siblings, 0 replies; 213+ messages in thread
From: David Seifert @ 2022-04-06 18:08 UTC (permalink / raw
To: gentoo-commits
commit: 1117e617c725e6d474628336fd5c2a6068d5eb76
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Wed Apr 6 18:07:58 2022 +0000
Commit: David Seifert <soap <AT> gentoo <DOT> org>
CommitDate: Wed Apr 6 18:07:58 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1117e617
sys-libs/ncurses: Remove libcurses.so symlink
Closes: https://github.com/gentoo/gentoo/pull/24882
Closes: https://bugs.gentoo.org/836696
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
Signed-off-by: David Seifert <soap <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106-r1.ebuild | 357 +++++++++++++++++++++++
1 file changed, 357 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106-r1.ebuild
new file mode 100644
index 000000000000..fbcbf40d9c66
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106-r1.ebuild
@@ -0,0 +1,357 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ ftp://ftp.invisible-island.net/${PN}/${MY_P}.tar.gz"
+
+if [[ "${PV}" == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-mirror.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2
+ https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2"
+ else
+ patch_date=
+ for patch_date in "${PATCH_DATES[@]}" ; do
+ SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
+ SRC_URI+=" https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
+ done
+ unset patch_date
+ fi
+
+ #SRC_URI+=" https://dev.gentoo.org/~polynomial-c/dist/${P}.patch.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS=""
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ if [[ "${PV}" == *_p* ]] ; then
+ #eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ eapply "${WORKDIR}"/
+ fi
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ #CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+
+ # Remove obsolete libcurses symlink that is created by the build
+ # system. Technically, this could be also achieved
+ # via --disable-overwrite but it also moves headers implicitly,
+ # and we do not want to do this yet.
+ # https://bugs.gentoo.org/836696
+ rm "${ED}"/usr/$(get_libdir)/libcurses* || die
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-11-11 3:28 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-11-11 3:28 UTC (permalink / raw
To: gentoo-commits
commit: 447555e1b62f34e97a54b2e322d39c0b8eeb9fd4
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Nov 11 03:28:25 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Nov 11 03:28:37 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=447555e1
sys-libs/ncurses: keyword 6.3_p20211106
Contains pkg-config fixes for e.g. cross and bootstrapping: avoids
bailing out if there's no pkg-config installed at least during bootstrap.
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
index 21b6525370f..6c1bee31282 100644
--- a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -48,8 +48,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-# Unkeyworded for testing; contains pkg-config fixes for e.g. cross and bootstrapping(?)
-#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-11-10 3:19 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-11-10 3:19 UTC (permalink / raw
To: gentoo-commits
commit: 3229119273afb0f45da6b72f2b3b17ed1286f63a
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Wed Nov 10 03:18:05 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Nov 10 03:19:14 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=32291192
sys-libs/ncurses: add 6.3_p20211106 (unkeyworded; for cross/bootstrap testing)
There was a bit of a kerfuffle re changes in 6.3 to parse pkg-config's
debug output to get its paths. That has since been fixed (after 6.3
was cut) along with some other useful pkg-config changes. Let's
pull them in to try avoid a bootstrap/cross issue I hit.
Unkeyworded for now.
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/Manifest | 3 +
sys-libs/ncurses/ncurses-6.3_p20211106.ebuild | 355 ++++++++++++++++++++++++++
2 files changed, 358 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 1ac19e4d9cb..71621376f4c 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,3 +1,6 @@
DIST ncurses-6.2-20210619-patch.sh.bz2 836967 BLAKE2B f210bf25c33f11d67e54a6f416aae75f0a976880ea543408780fd3a8dc992ee8d9999bf15c925c79504be0f30ade4bbfaed763abedd2b2d6b35de65b353a6314 SHA512 b8392bf6c0b7570766ae31a043df311660201265dfe3e2e49425b1e2aa08c72030b5f5b6c7871532897596262c88a7192e3ff2adfdc618f1b9c13c22c373eeb3
DIST ncurses-6.2.tar.gz 3425862 BLAKE2B 6680cd7a369a4cb8234442a70869c283f0db6db9d7da1da2a7a5c519eb862a2c9b9411957d99f9ebb5089cad00b42e1ca6bc0784327461113df2eeaec695913c SHA512 4c1333dcc30e858e8a9525d4b9aefb60000cfc727bc4a1062bace06ffc4639ad9f6e54f6bdda0e3a0e5ea14de995f96b52b3327d9ec633608792c99a1e8d840d
+DIST ncurses-6.3-20211026.patch.gz 117363 BLAKE2B 74c6c80271edc3b69d17c891436e48ee0579b3d16dd1bbd42f953be5b6ef07596343abd34f4d508b0cb371c1c0febfec12d65e938739892a617c8b141f599753 SHA512 25a99bc9cb7a18eb8fd16a0f887bae90c2551e0228b077d28f7217e58190f4b19a526350c999922f7394a1b749e834643c1bf5f339248b842717c146a3ec1df4
+DIST ncurses-6.3-20211030.patch.gz 46304 BLAKE2B 6fa0f5223c97dc045117c208b92e75aad61638585506aeed0fa5cd6b215f67d212fc780e527f1281ae77063edb1ef9b3a3671b00d306fe322c3ca1b34c1d4d81 SHA512 90440af3959a17388999f07a3b40f770c5511bceda6a39d4c56f867dc5ae8494e49cfb700eb79e31422ebfd1b1990f6d7912083c688963139446f1e43e9d08c8
+DIST ncurses-6.3-20211106.patch.gz 3995 BLAKE2B fbacfd6bfbf64b2935d47f648bd74c93136ea8d17b51e218b80a24695b52246ce8ec01704a0636692bae72815c8b93dec8573570dfd126b19645ec90926e818a SHA512 799819ed01967387fdca4755ab44401f0dc90306f6f771c894ce6702c929e2ff87f45d3e1c2e683cc32bb01553f3332c3a7591a00b7a4bdff93da25307379bdc
DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
diff --git a/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
new file mode 100644
index 00000000000..21b6525370f
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3_p20211106.ebuild
@@ -0,0 +1,355 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ ftp://ftp.invisible-island.net/${PN}/${MY_P}.tar.gz"
+
+if [[ "${PV}" == *_p* ]] ; then
+ # Sometimes, after releases, there's no megapatch available yet.
+ #
+ # From upstream README at e.g. https://invisible-mirror.net/archives/ncurses/6.3/:
+ #
+ # "At times (generally to mark a relatively stable point), I create a rollup
+ # patch, which consists of all changes from the release through the current date."
+ #
+ # This array should contain a list of all the snapshots since the last
+ # release if there's no megapatch available yet.
+ PATCH_DATES=(
+ 20211026
+ 20211030
+ # Latest patch is just _pN = $(ver_cut 4)
+ $(ver_cut 4)
+ )
+
+ if [[ -z ${PATCH_DATES[@]} ]] ; then
+ SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2
+ https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.bz2"
+ else
+ patch_date=
+ for patch_date in "${PATCH_DATES[@]}" ; do
+ SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
+ SRC_URI+=" https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-${patch_date}.patch.gz"
+ done
+ unset patch_date
+ fi
+
+ #SRC_URI+=" https://dev.gentoo.org/~polynomial-c/dist/${P}.patch.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+# Unkeyworded for testing; contains pkg-config fixes for e.g. cross and bootstrapping(?)
+#KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ if [[ "${PV}" == *_p* ]] ; then
+ #eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ eapply "${WORKDIR}"/
+ fi
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal --with-progs
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ #CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-11-01 2:23 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2021-11-01 2:23 UTC (permalink / raw
To: gentoo-commits
commit: f994975cb3b2a2ff7f4aa8a69c88e3e0f10b68e5
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Mon Nov 1 02:21:55 2021 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Mon Nov 1 02:22:53 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f994975c
sys-libs/ncurses: enable progs when cross-compiling
The native abi detection logic gets confused when cross-compiling,
so just always force progs on here and call it a day.
Closes: https://bugs.gentoo.org/711590
Signed-off-by: Mike Frysinger <vapier <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.3.ebuild | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index 718ab0d0f1f..6353b40857d 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -92,7 +92,7 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal
+ do_configure cross --without-shared --with-normal --with-progs
fi
multilib-minimal_src_configure
}
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index 0e5076cc2ac..464f7ca0bcc 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -93,7 +93,7 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal
+ do_configure cross --without-shared --with-normal --with-progs
fi
multilib-minimal_src_configure
}
diff --git a/sys-libs/ncurses/ncurses-6.3.ebuild b/sys-libs/ncurses/ncurses-6.3.ebuild
index 0ec37369cc3..0faa70d2aa5 100644
--- a/sys-libs/ncurses/ncurses-6.3.ebuild
+++ b/sys-libs/ncurses/ncurses-6.3.ebuild
@@ -95,7 +95,7 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal
+ do_configure cross --without-shared --with-normal --with-progs
fi
multilib-minimal_src_configure
}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-10-27 15:07 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-10-27 15:07 UTC (permalink / raw
To: gentoo-commits
commit: 605137dc5e9a4f183d63b87c0179f4b1afb21c80
Author: Rolf Eike Beer <eike <AT> sf-mail <DOT> de>
AuthorDate: Wed Oct 27 14:51:42 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Oct 27 15:07:25 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=605137dc
sys-libs/ncurses: stable 6.2_p20210619 for hppa, bug #819441
Package-Manager: Portage-3.0.20, Repoman-3.0.3
RepoMan-Options: --include-arches="hppa"
Signed-off-by: Rolf Eike Beer <eike <AT> sf-mail.de>
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index 79a6f96fd2a..0e5076cc2ac 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -20,7 +20,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-10-27 4:13 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-10-27 4:13 UTC (permalink / raw
To: gentoo-commits
commit: 3c2a0858cbc75a32e92670cc005ac7190ef874d9
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Wed Oct 27 04:10:56 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Oct 27 04:10:56 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3c2a0858
sys-libs/ncurses: Stabilize 6.2_p20210619 arm, #819441
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index 14cd9788c9c..79a6f96fd2a 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -20,7 +20,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-10-26 3:14 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-10-26 3:14 UTC (permalink / raw
To: gentoo-commits
commit: 436069da47472b743f547814c01671618da7003f
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Tue Oct 26 03:12:39 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Tue Oct 26 03:12:39 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=436069da
sys-libs/ncurses: Stabilize 6.2_p20210619 arm64, #819441
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index b2aacbebe2a..14cd9788c9c 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -20,7 +20,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-10-24 0:19 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-10-24 0:19 UTC (permalink / raw
To: gentoo-commits
commit: 0607841e35f44b37f725af3568cc595dc9525301
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Oct 24 00:16:47 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Oct 24 00:16:47 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0607841e
sys-libs/ncurses: Stabilize 6.2_p20210619 x86, #819441
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index 3edd8f9c591..b2aacbebe2a 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -20,7 +20,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-10-23 13:51 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-10-23 13:51 UTC (permalink / raw
To: gentoo-commits
commit: 3e177e828785743fbec160e119d51066ccf11373
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Oct 23 13:50:27 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Oct 23 13:50:27 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3e177e82
sys-libs/ncurses: Stabilize 6.2_p20210619 sparc, #819441
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index 4be6cb8bf80..3edd8f9c591 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -20,7 +20,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-10-23 13:51 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-10-23 13:51 UTC (permalink / raw
To: gentoo-commits
commit: 17d73e979d03b3d54717d5b4674f62fee5389e33
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Oct 23 13:50:00 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Oct 23 13:50:00 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=17d73e97
sys-libs/ncurses: Stabilize 6.2_p20210619 ppc64, #819441
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index 1716cce7a7a..4be6cb8bf80 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -20,7 +20,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-10-23 13:51 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-10-23 13:51 UTC (permalink / raw
To: gentoo-commits
commit: 9b70d0a33e1c8093063703f0fa7334d9c6c63339
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Oct 23 13:49:56 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Oct 23 13:49:56 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9b70d0a3
sys-libs/ncurses: Stabilize 6.2_p20210619 ppc, #819441
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index 0bbee5edf36..1716cce7a7a 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -20,7 +20,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-10-23 13:51 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-10-23 13:51 UTC (permalink / raw
To: gentoo-commits
commit: 871c8ff03fd916df57ef85fd7409a0a716d16b3b
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Oct 23 13:48:27 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Oct 23 13:48:27 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=871c8ff0
sys-libs/ncurses: Stabilize 6.2_p20210619 amd64, #819441
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index 2b2a6df484d..0bbee5edf36 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -20,7 +20,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-10-22 8:21 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2021-10-22 8:21 UTC (permalink / raw
To: gentoo-commits
commit: 91a0ea9ba566e21839945c430ab679ae0c9dc403
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Fri Oct 22 08:12:40 2021 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Fri Oct 22 08:21:02 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=91a0ea9b
sys-libs/ncurses: Bump to version 6.3
Signed-off-by: Lars Wendler <polynomial-c <AT> gentoo.org>
sys-libs/ncurses/Manifest | 1 +
sys-libs/ncurses/ncurses-6.3.ebuild | 328 ++++++++++++++++++++++++++++++++++++
2 files changed, 329 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 3f504d0580a..1ac19e4d9cb 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,2 +1,3 @@
DIST ncurses-6.2-20210619-patch.sh.bz2 836967 BLAKE2B f210bf25c33f11d67e54a6f416aae75f0a976880ea543408780fd3a8dc992ee8d9999bf15c925c79504be0f30ade4bbfaed763abedd2b2d6b35de65b353a6314 SHA512 b8392bf6c0b7570766ae31a043df311660201265dfe3e2e49425b1e2aa08c72030b5f5b6c7871532897596262c88a7192e3ff2adfdc618f1b9c13c22c373eeb3
DIST ncurses-6.2.tar.gz 3425862 BLAKE2B 6680cd7a369a4cb8234442a70869c283f0db6db9d7da1da2a7a5c519eb862a2c9b9411957d99f9ebb5089cad00b42e1ca6bc0784327461113df2eeaec695913c SHA512 4c1333dcc30e858e8a9525d4b9aefb60000cfc727bc4a1062bace06ffc4639ad9f6e54f6bdda0e3a0e5ea14de995f96b52b3327d9ec633608792c99a1e8d840d
+DIST ncurses-6.3.tar.gz 3583550 BLAKE2B b2c174ac48d587b4d3aa054f04e4ec8bffd8a657a4aff5f090104965c741901e600712c8f8e5e98f3b8a26bc558996a1e14a746f113854832853b855e9d406c3 SHA512 5373f228cba6b7869210384a607a2d7faecfcbfef6dbfcd7c513f4e84fbd8bcad53ac7db2e7e84b95582248c1039dcfc7c4db205a618f7da22a166db482f0105
diff --git a/sys-libs/ncurses/ncurses-6.3.ebuild b/sys-libs/ncurses/ncurses-6.3.ebuild
new file mode 100644
index 00000000000..0ec37369cc3
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.3.ebuild
@@ -0,0 +1,328 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz
+ https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
+ ftp://ftp.invisible-island.net/${PN}/${MY_P}.tar.gz"
+
+if [[ "${PV}" == *_p* ]] ; then
+ SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2
+ https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2"
+ #SRC_URI+=" https://dev.gentoo.org/~polynomial-c/dist/${P}.patch.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ if [[ "${PV}" == *_p* ]] ; then
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ #eapply "${WORKDIR}/${P}.patch"
+ fi
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ #CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-09-18 18:26 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2021-09-18 18:26 UTC (permalink / raw
To: gentoo-commits
commit: 75038b624bc5ad2037a29ad00c2b8947c80286a7
Author: Vaibhav Rustagi <vaibhavrustagi <AT> google <DOT> com>
AuthorDate: Fri Aug 13 23:38:48 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Sep 18 18:20:34 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=75038b62
sys-libs/ncurses: Use `BUILD_CC` as `CC` when compiling tic.
Not having `CC` explictly set creates a problem in case of
cross-compilation as it can use host `CC` for tic.
Signed-off-by: Vaibhav Rustagi <vaibhavrustagi <AT> google.com>
Closes: https://github.com/gentoo/gentoo/pull/21984
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 1 +
1 file changed, 1 insertion(+)
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
index d49df4d8ee3..2b2a6df484d 100644
--- a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -87,6 +87,7 @@ src_configure() {
# We can't re-use the multilib BUILD_DIR because we run outside of it.
BUILD_DIR="${WORKDIR}" \
+ CC=${BUILD_CC} \
CHOST=${CBUILD} \
CFLAGS=${BUILD_CFLAGS} \
CXXFLAGS=${BUILD_CXXFLAGS} \
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-07-19 13:59 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2021-07-19 13:59 UTC (permalink / raw
To: gentoo-commits
commit: 158c41cc09c9c49679bf905a0ea7b7d41d244d00
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Mon Jul 19 13:58:34 2021 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Mon Jul 19 13:58:55 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=158c41cc
sys-libs/ncurses: Bump to version 6.2_p20210619
Signed-off-by: Lars Wendler <polynomial-c <AT> gentoo.org>
sys-libs/ncurses/Manifest | 1 +
sys-libs/ncurses/ncurses-6.2_p20210619.ebuild | 325 ++++++++++++++++++++++++++
2 files changed, 326 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 401a4ce6c09..04f030ff041 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,2 +1,3 @@
+DIST ncurses-6.2-20210619-patch.sh.bz2 836967 BLAKE2B f210bf25c33f11d67e54a6f416aae75f0a976880ea543408780fd3a8dc992ee8d9999bf15c925c79504be0f30ade4bbfaed763abedd2b2d6b35de65b353a6314 SHA512 b8392bf6c0b7570766ae31a043df311660201265dfe3e2e49425b1e2aa08c72030b5f5b6c7871532897596262c88a7192e3ff2adfdc618f1b9c13c22c373eeb3
DIST ncurses-6.2.tar.gz 3425862 BLAKE2B 6680cd7a369a4cb8234442a70869c283f0db6db9d7da1da2a7a5c519eb862a2c9b9411957d99f9ebb5089cad00b42e1ca6bc0784327461113df2eeaec695913c SHA512 4c1333dcc30e858e8a9525d4b9aefb60000cfc727bc4a1062bace06ffc4639ad9f6e54f6bdda0e3a0e5ea14de995f96b52b3327d9ec633608792c99a1e8d840d
DIST ncurses-6.2_p20210123.patch.xz 519076 BLAKE2B 790ca80f0b7cdba2e75e3ace91e7f40a740594bdcb19930f64a5aaad8ba041f9ee6057e0a856050e5ef54f79ffe21f23897477dd186790fce9f8192d6149e8fc SHA512 f0d4ef317157472400f183e9ba65102e342e996c4f1d99924ece72305064c3d8616668bb2c81c6113b4bd145b1589844f8c948e6424d4372939752364bed6141
diff --git a/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
new file mode 100644
index 00000000000..d49df4d8ee3
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.2_p20210619.ebuild
@@ -0,0 +1,325 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+if [[ "${PV}" == *_p* ]] ; then
+ SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2
+ https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2"
+ #SRC_URI+=" https://dev.gentoo.org/~polynomial-c/dist/${P}.patch.xz"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.2_p20210123-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ if [[ "${PV}" == *_p* ]] ; then
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ #eapply "${WORKDIR}/${P}.patch"
+ fi
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ ncursesw
+ ncursest
+ ncursestw
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ --disable-pkg-ldflags
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ #CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(usex tinfo 'tinfow tinfo' '')
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-05-09 12:53 David Seifert
0 siblings, 0 replies; 213+ messages in thread
From: David Seifert @ 2021-05-09 12:53 UTC (permalink / raw
To: gentoo-commits
commit: aca6d839300ae2b28dc0ea4ac71e6fce273d5508
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun May 9 12:53:19 2021 +0000
Commit: David Seifert <soap <AT> gentoo <DOT> org>
CommitDate: Sun May 9 12:53:19 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=aca6d839
sys-libs/ncurses: add changelog
Signed-off-by: Sam James <sam <AT> gentoo.org>
Signed-off-by: David Seifert <soap <AT> gentoo.org>
sys-libs/ncurses/metadata.xml | 33 +++++++++++++++++----------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/sys-libs/ncurses/metadata.xml b/sys-libs/ncurses/metadata.xml
index 1030e9cebba..87ea7dea8ed 100644
--- a/sys-libs/ncurses/metadata.xml
+++ b/sys-libs/ncurses/metadata.xml
@@ -1,20 +1,21 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
<pkgmetadata>
-<maintainer type="project">
- <email>base-system@gentoo.org</email>
- <name>Gentoo Base System</name>
-</maintainer>
-<use>
- <flag name="ada">Add bindings for the ADA programming language</flag>
- <flag name="tinfo">
- Build curses library (libncurses) sep from the low-level terminfo
- library (libtinfo) -- usually needed only for binary packages -- but
- it is binary compatible in either mode
- </flag>
- <flag name="trace">Enable test trace() support in ncurses calls</flag>
-</use>
-<upstream>
- <remote-id type="cpe">cpe:/a:gnu:ncurses</remote-id>
-</upstream>
+ <maintainer type="project">
+ <email>base-system@gentoo.org</email>
+ <name>Gentoo Base System</name>
+ </maintainer>
+ <use>
+ <flag name="ada">Add bindings for the ADA programming language</flag>
+ <flag name="tinfo">
+ Build curses library (libncurses) sep from the low-level terminfo
+ library (libtinfo) -- usually needed only for binary packages -- but
+ it is binary compatible in either mode
+ </flag>
+ <flag name="trace">Enable test trace() support in ncurses calls</flag>
+ </use>
+ <upstream>
+ <changelog>https://invisible-island.net/ncurses/NEWS.html</changelog>
+ <remote-id type="cpe">cpe:/a:gnu:ncurses</remote-id>
+ </upstream>
</pkgmetadata>
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2021-01-06 15:35 Fabian Groffen
0 siblings, 0 replies; 213+ messages in thread
From: Fabian Groffen @ 2021-01-06 15:35 UTC (permalink / raw
To: gentoo-commits
commit: 69bf5afaa9cbaa541286f60845a6f83066dd9017
Author: Fabian Groffen <grobian <AT> gentoo <DOT> org>
AuthorDate: Wed Jan 6 15:34:32 2021 +0000
Commit: Fabian Groffen <grobian <AT> gentoo <DOT> org>
CommitDate: Wed Jan 6 15:34:32 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=69bf5afa
sys-libs/ncurses: drop x86-macos
Package-Manager: Portage-3.0.12, Repoman-3.0.2
Signed-off-by: Fabian Groffen <grobian <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index 17f76298c52..3876d51a41e 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2020 Gentoo Authors
+# Copyright 1999-2021 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-12-26 20:59 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2020-12-26 20:59 UTC (permalink / raw
To: gentoo-commits
commit: 05e86e32405bf5b331bc7398bea0ba4e34eed5bf
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Dec 26 20:59:05 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Dec 26 20:59:05 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=05e86e32
sys-libs/ncurses: drop ~m68k-mint
Package-Manager: Portage-3.0.12-prefix, Repoman-3.0.2
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index d7dc0d518f1..17f76298c52 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos ~m68k-mint ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-12-26 20:56 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2020-12-26 20:56 UTC (permalink / raw
To: gentoo-commits
commit: 9003b0a3fbb2005567c74cdb2cee0ba075baaf1c
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Dec 26 20:53:38 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Dec 26 20:56:57 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9003b0a3
sys-libs/ncurses: sync with ::prefix
Package-Manager: Portage-3.0.12-prefix, Repoman-3.0.2
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index 968abbe3853..d7dc0d518f1 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86 ~x64-macos"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos ~m68k-mint ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
@@ -79,7 +79,7 @@ src_configure() {
local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
case ${CHOST} in
*-darwin*) dbuildflags= ;;
- *-aix*) dbuildflags= ;;
+ *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
esac
echo "int main() {}" | \
$(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
@@ -195,8 +195,17 @@ do_configure() {
src_compile() {
# See comments in src_configure.
if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
+ # We could possibly merge these two branches but opting to be
+ # conservative when merging some of the Prefix changes.
+
+ if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then
+ # We make 'tic$(x)' here, for Cygwin having x=".exe".
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs all PROGS='tic$(x)'
+ else
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
fi
multilib-minimal_src_compile
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-11-27 23:51 Sam James
0 siblings, 0 replies; 213+ messages in thread
From: Sam James @ 2020-11-27 23:51 UTC (permalink / raw
To: gentoo-commits
commit: 62743824341e365f3e5c993c03b7c63320506676
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Nov 27 23:51:03 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Nov 27 23:51:03 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=62743824
sys-libs/ncurses: ~x64-macos keyworded (bug #729978)
Package-Manager: Portage-3.0.9, Repoman-3.0.2
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index e9bdde4156d..968abbe3853 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86 ~x64-macos"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-07-14 10:49 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2020-07-14 10:49 UTC (permalink / raw
To: gentoo-commits
commit: 141f394e8b1f274d1f14cc60d3370ed50345fe25
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Tue Jul 14 10:49:10 2020 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Tue Jul 14 10:49:10 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=141f394e
sys-libs/ncurses: Removed old
Package-Manager: Portage-2.3.103, Repoman-2.3.23
Signed-off-by: Lars Wendler <polynomial-c <AT> gentoo.org>
sys-libs/ncurses/Manifest | 3 -
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 310 -------------------------
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 315 --------------------------
3 files changed, 628 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 67621254132..61cb703f5fe 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,4 +1 @@
-DIST ncurses-6.1-20181020-patch.sh.bz2 361598 BLAKE2B e74f6b4e81c822ae500724ebe707031d3157190e96256656940241e4485fa3d96669e069e764cecc829d9fccccc11caaab8c68ae489b083ade4f286647ac74af SHA512 e54bf83cae5bae3ddb909b9bbe91f549b366a5c60b6274f6b27a3f28b5f9f1afe7263487db842f8cbc22a93e0ef17f0fd518a0585523116e192174f44423ae4a
-DIST ncurses-6.1-20190609-patch.sh.bz2 602174 BLAKE2B 38b1cb1f376b8fdfddc7cf9ed8e10190dd50fc2315f11eaf3a14c0299167c0e6bbd82a3684fa83d6e8fa6d2f02ea14e88ea065f8bb886905d85788bde13731c0 SHA512 efd009f5087a7b16413b94ce37ad19da0df8974be579b742d57bc64e034792ccf03b9967593a0ac5c90522ccfde4b6d23ef763d6fbeb91a5f327f8d7a0970872
-DIST ncurses-6.1.tar.gz 3365395 BLAKE2B 1248a5088bc982d0880cb9550b1192457f6f624937c4b66807668c22a608002ba6c38d876986f2c2b9ee46f91d087c88bc0b19920733e4c7ca0ed8e92d9d47de SHA512 e308af43f8b7e01e98a55f4f6c4ee4d1c39ce09d95399fa555b3f0cdf5fd0db0f4c4d820b4af78a63f6cf6d8627587114a40af48cfc066134b600520808a77ee
DIST ncurses-6.2.tar.gz 3425862 BLAKE2B 6680cd7a369a4cb8234442a70869c283f0db6db9d7da1da2a7a5c519eb862a2c9b9411957d99f9ebb5089cad00b42e1ca6bc0784327461113df2eeaec695913c SHA512 4c1333dcc30e858e8a9525d4b9aefb60000cfc727bc4a1062bace06ffc4639ad9f6e54f6bdda0e3a0e5ea14de995f96b52b3327d9ec633608792c99a1e8d840d
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
deleted file mode 100644
index f9e2b3a1a1e..00000000000
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ /dev/null
@@ -1,310 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-if [[ "${PV}" == *_p* ]] ; then
- SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2
- https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-
-S=${WORKDIR}/${MY_P}
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
-)
-
-src_prepare() {
- if [[ "${PV}" == *_p* ]] ; then
- eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- fi
- default
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- $(usex unicode 'ncursesw' '')
- $(usex threads 'ncursest' '')
- $(use unicode && usex threads 'ncursestw' '')
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-aix*) dbuildflags= ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE="${S}" \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
- fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- # don't delete '*.dll.a', needed for linking #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- dosym ../share/terminfo /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc for embedded/recovery. #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
deleted file mode 100644
index cb824856ffa..00000000000
--- a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
+++ /dev/null
@@ -1,315 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-if [[ "${PV}" == *_p* ]] ; then
- SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2
- https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2"
-fi
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
-RESTRICT="!test? ( test )"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
-)
-
-src_prepare() {
- if [[ "${PV}" == *_p* ]] ; then
- eapply "${WORKDIR}"/${P/_p/-}-patch.sh
- fi
- default
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- $(usex unicode 'ncursesw' '')
- $(usex threads 'ncursest' '')
- $(use unicode && usex threads 'ncursestw' '')
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-aix*) dbuildflags= ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE="${S}" \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
- fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- # don't delete '*.dll.a', needed for linking #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (#689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc for embedded/recovery. #37026
- einfo "Installing basic terminfo files in /etc..."
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- local x
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
- dosym "../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-05-11 16:49 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2020-05-11 16:49 UTC (permalink / raw
To: gentoo-commits
commit: d4b317ceb5e005fd30e1c69602513322a6c37459
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Mon May 11 16:48:32 2020 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Mon May 11 16:49:08 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d4b317ce
sys-libs/ncurses: x86 stable wrt bug #698210
Package-Manager: Portage-2.3.99, Repoman-2.3.22
RepoMan-Options: --include-arches="x86"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index 78202ae5b86..4e5ee6bf371 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm ~arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc ~x86"
+KEYWORDS="~alpha amd64 arm ~arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-05-10 8:10 Sergei Trofimovich
0 siblings, 0 replies; 213+ messages in thread
From: Sergei Trofimovich @ 2020-05-10 8:10 UTC (permalink / raw
To: gentoo-commits
commit: 8d8b5ac0b4106327a5faeecb747d94b22315365b
Author: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
AuthorDate: Sun May 10 08:08:44 2020 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Sun May 10 08:10:08 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8d8b5ac0
sys-libs/ncurses: stable 6.2-r1 for hppa, bug #698210
Package-Manager: Portage-2.3.99, Repoman-2.3.22
RepoMan-Options: --include-arches="hppa"
Signed-off-by: Sergei Trofimovich <slyfox <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index 337001ca603..78202ae5b86 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc ~x86"
+KEYWORDS="~alpha amd64 arm ~arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc ~x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-05-08 17:15 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2020-05-08 17:15 UTC (permalink / raw
To: gentoo-commits
commit: 2c64b1f4498616b9f85a0a7f909c67f5401e60e8
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Fri May 8 17:14:20 2020 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Fri May 8 17:14:20 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2c64b1f4
sys-libs/ncurses: sparc stable wrt bug #698210
Package-Manager: Portage-2.3.89, Repoman-2.3.20
RepoMan-Options: --include-arches="sparc"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index 84aafe34f1c..cd78c1fa03e 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~riscv s390 ~sparc ~x86"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~riscv s390 sparc ~x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-05-08 17:13 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2020-05-08 17:13 UTC (permalink / raw
To: gentoo-commits
commit: 03773058286768ae6e2efe8672608157d408d601
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Fri May 8 17:13:40 2020 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Fri May 8 17:13:40 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=03773058
sys-libs/ncurses: s390 stable wrt bug #698210
Package-Manager: Portage-2.3.89, Repoman-2.3.20
RepoMan-Options: --include-arches="s390"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index 595eacdcad6..84aafe34f1c 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~riscv s390 ~sparc ~x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-05-08 17:11 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2020-05-08 17:11 UTC (permalink / raw
To: gentoo-commits
commit: 278e204ee526c1630d54668dca456777948b2000
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Fri May 8 17:11:21 2020 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Fri May 8 17:11:21 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=278e204e
sys-libs/ncurses: ppc stable wrt bug #698210
Package-Manager: Portage-2.3.89, Repoman-2.3.20
RepoMan-Options: --include-arches="ppc"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index b70eea0d2f5..595eacdcad6 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~riscv ~s390 ~sparc ~x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-05-06 14:23 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2020-05-06 14:23 UTC (permalink / raw
To: gentoo-commits
commit: a4fe8b0a0654603a5f230254bda88398a9550b81
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Wed May 6 14:23:13 2020 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Wed May 6 14:23:13 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a4fe8b0a
sys-libs/ncurses: amd64 stable wrt bug #698210
Package-Manager: Portage-2.3.89, Repoman-2.3.20
RepoMan-Options: --include-arches="amd64"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.2-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.2-r1.ebuild b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
index 89fccf97ba4..b70eea0d2f5 100644
--- a/sys-libs/ncurses/ncurses-6.2-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.2-r1.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-03-29 10:16 Sergei Trofimovich
0 siblings, 0 replies; 213+ messages in thread
From: Sergei Trofimovich @ 2020-03-29 10:16 UTC (permalink / raw
To: gentoo-commits
commit: c728dad17a7a9f0790095a0f82748fd5482b908c
Author: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
AuthorDate: Sun Mar 29 10:16:11 2020 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Sun Mar 29 10:16:11 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c728dad1
sys-libs/ncurses: destabilize down to ~m68k
Bug: https://bugs.gentoo.org/695824
Package-Manager: Portage-2.3.96, Repoman-2.3.22
Signed-off-by: Sergei Trofimovich <slyfox <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 9539dd7a758..ea5632a249b 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 ~riscv s390 sparc x86"
+KEYWORDS="~alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 sparc x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2020-02-13 10:20 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2020-02-13 10:20 UTC (permalink / raw
To: gentoo-commits
commit: ef228f0edb492604e034cc0f42f7fcebf8545f2e
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Thu Feb 13 09:42:05 2020 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Thu Feb 13 10:20:00 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ef228f0e
sys-libs/ncurses: Bump to version 6.2
Package-Manager: Portage-2.3.88, Repoman-2.3.20
Signed-off-by: Lars Wendler <polynomial-c <AT> gentoo.org>
sys-libs/ncurses/Manifest | 1 +
sys-libs/ncurses/ncurses-6.2.ebuild | 315 ++++++++++++++++++++++++++++++++++++
2 files changed, 316 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 65b269a345c..67621254132 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,3 +1,4 @@
DIST ncurses-6.1-20181020-patch.sh.bz2 361598 BLAKE2B e74f6b4e81c822ae500724ebe707031d3157190e96256656940241e4485fa3d96669e069e764cecc829d9fccccc11caaab8c68ae489b083ade4f286647ac74af SHA512 e54bf83cae5bae3ddb909b9bbe91f549b366a5c60b6274f6b27a3f28b5f9f1afe7263487db842f8cbc22a93e0ef17f0fd518a0585523116e192174f44423ae4a
DIST ncurses-6.1-20190609-patch.sh.bz2 602174 BLAKE2B 38b1cb1f376b8fdfddc7cf9ed8e10190dd50fc2315f11eaf3a14c0299167c0e6bbd82a3684fa83d6e8fa6d2f02ea14e88ea065f8bb886905d85788bde13731c0 SHA512 efd009f5087a7b16413b94ce37ad19da0df8974be579b742d57bc64e034792ccf03b9967593a0ac5c90522ccfde4b6d23ef763d6fbeb91a5f327f8d7a0970872
DIST ncurses-6.1.tar.gz 3365395 BLAKE2B 1248a5088bc982d0880cb9550b1192457f6f624937c4b66807668c22a608002ba6c38d876986f2c2b9ee46f91d087c88bc0b19920733e4c7ca0ed8e92d9d47de SHA512 e308af43f8b7e01e98a55f4f6c4ee4d1c39ce09d95399fa555b3f0cdf5fd0db0f4c4d820b4af78a63f6cf6d8627587114a40af48cfc066134b600520808a77ee
+DIST ncurses-6.2.tar.gz 3425862 BLAKE2B 6680cd7a369a4cb8234442a70869c283f0db6db9d7da1da2a7a5c519eb862a2c9b9411957d99f9ebb5089cad00b42e1ca6bc0784327461113df2eeaec695913c SHA512 4c1333dcc30e858e8a9525d4b9aefb60000cfc727bc4a1062bace06ffc4639ad9f6e54f6bdda0e3a0e5ea14de995f96b52b3327d9ec633608792c99a1e8d840d
diff --git a/sys-libs/ncurses/ncurses-6.2.ebuild b/sys-libs/ncurses/ncurses-6.2.ebuild
new file mode 100644
index 00000000000..b5bc19b8f78
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.2.ebuild
@@ -0,0 +1,315 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+if [[ "${PV}" == *_p* ]] ; then
+ SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2
+ https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
+RESTRICT="!test? ( test )"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ if [[ "${PV}" == *_p* ]] ; then
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ fi
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ $(usex unicode 'ncursesw' '')
+ $(usex threads 'ncursest' '')
+ $(use unicode && usex threads 'ncursestw' '')
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-aix*) dbuildflags= ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(use tinfo && usex unicode 'tinfow' '') \
+ $(usev tinfo)
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-12-24 14:00 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2019-12-24 14:00 UTC (permalink / raw
To: gentoo-commits
commit: 40f7628572ea9ad2db5e0adfa9dfc4d1c167c708
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Tue Dec 24 14:00:12 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Tue Dec 24 14:00:12 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=40f76285
sys-libs/ncurses: arm stable wrt bug #695824
Package-Manager: Portage-2.3.79, Repoman-2.3.16
RepoMan-Options: --include-arches="arm"
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
index 034784c8666..f7e2f98a667 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86"
+KEYWORDS="~alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-12-17 21:41 Sergei Trofimovich
0 siblings, 0 replies; 213+ messages in thread
From: Sergei Trofimovich @ 2019-12-17 21:41 UTC (permalink / raw
To: gentoo-commits
commit: 00a5cd9ec451f45935dfc46a5c60024ade9b609f
Author: Rolf Eike Beer <eike <AT> sf-mail <DOT> de>
AuthorDate: Tue Dec 17 20:47:05 2019 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Tue Dec 17 21:41:02 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=00a5cd9e
sys-libs/ncurses: stable 6.1_p20190609 for hppa, bug #695824
Package-Manager: Portage-2.3.79, Repoman-2.3.16
RepoMan-Options: --include-arches="hppa"
Signed-off-by: Rolf Eike Beer <eike <AT> sf-mail.de>
Signed-off-by: Sergei Trofimovich <slyfox <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
index fe308345067..034784c8666 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86"
+KEYWORDS="~alpha amd64 ~arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-12-15 14:07 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-12-15 14:07 UTC (permalink / raw
To: gentoo-commits
commit: 9c9c44eebda120890f91d99f2ac7ff214bd4d43a
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Sun Dec 15 14:05:10 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Sun Dec 15 14:07:15 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9c9c44ee
sys-libs/ncurses: ppc stable wrt bug #695824
Package-Manager: Portage-2.3.79, Repoman-2.3.16
RepoMan-Options: --include-arches="ppc"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
index e27657315f4..1d404c8455d 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh sparc x86"
+KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ia64 ~m68k ~mips ppc ~ppc64 ~riscv s390 ~sh sparc x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-12-15 13:59 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-12-15 13:59 UTC (permalink / raw
To: gentoo-commits
commit: 417441fd5f3155c60dae1c42b127ee9f59503880
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Sun Dec 15 13:59:05 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Sun Dec 15 13:59:05 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=417441fd
sys-libs/ncurses: sparc stable wrt bug #695824
Package-Manager: Portage-2.3.79, Repoman-2.3.16
RepoMan-Options: --include-arches="sparc"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
index 68aec0ba996..e27657315f4 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh ~sparc x86"
+KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh sparc x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-12-15 12:48 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-12-15 12:48 UTC (permalink / raw
To: gentoo-commits
commit: 7288fed4d0b7bd5bfba127575b9c33b07fd9228b
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Sun Dec 15 12:48:05 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Sun Dec 15 12:48:05 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7288fed4
sys-libs/ncurses: x86 stable wrt bug #695824
Package-Manager: Portage-2.3.79, Repoman-2.3.16
RepoMan-Options: --include-arches="x86"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
index 94e0e8f0961..7f2deedbcc9 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh ~sparc ~x86"
+KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh ~sparc x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-12-15 11:38 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-12-15 11:38 UTC (permalink / raw
To: gentoo-commits
commit: ad1648aff83d96c0b29265ddf5a208f76beb5415
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Sun Dec 15 11:34:45 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Sun Dec 15 11:34:45 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ad1648af
sys-libs/ncurses: s390 stable wrt bug #695824
Package-Manager: Portage-2.3.79, Repoman-2.3.16
RepoMan-Options: --include-arches="s390"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
index 5964f031d3a..94e0e8f0961 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86"
+KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh ~sparc ~x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-12-15 10:36 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2019-12-15 10:36 UTC (permalink / raw
To: gentoo-commits
commit: 388370dee42fd4c6fc31f4276a39146c03fafba8
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Dec 15 10:35:54 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Dec 15 10:35:54 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=388370de
sys-libs/ncurses: amd64 stable wrt bug #695824
Package-Manager: Portage-2.3.79, Repoman-2.3.16
RepoMan-Options: --include-arches="amd64"
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
index 88082eb18b7..5964f031d3a 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86"
+KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-12-14 23:01 Aaron Bauman
0 siblings, 0 replies; 213+ messages in thread
From: Aaron Bauman @ 2019-12-14 23:01 UTC (permalink / raw
To: gentoo-commits
commit: 137d5462362e7b7b4e13be35b985e1a78be669c3
Author: Aaron Bauman <bman <AT> gentoo <DOT> org>
AuthorDate: Sat Dec 14 23:00:43 2019 +0000
Commit: Aaron Bauman <bman <AT> gentoo <DOT> org>
CommitDate: Sat Dec 14 23:00:43 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=137d5462
sys-libs/ncurses: arm64 stable (bug #695824)
Signed-off-by: Aaron Bauman <bman <AT> gentoo.org>
Package-Manager: Portage-2.3.81, Repoman-2.3.20
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
index 1d219963c3f..88082eb18b7 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86"
+KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
RESTRICT="!test? ( test )"
^ permalink raw reply related [flat|nested] 213+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-28 20:07 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2019-07-28 20:07 UTC (permalink / raw
To: gentoo-commits
commit: 3475ed987b0df283fb1d44d00df987e7bf827f63
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Jul 28 20:06:45 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Jul 28 20:06:45 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3475ed98
sys-libs/ncurses: m68k stable wrt bug #690050
Package-Manager: Portage-2.3.66, Repoman-2.3.16
RepoMan-Options: --include-arches="m68k"
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index f72c2ab2d89..574c51f14e7 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-28 20:07 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2019-07-28 20:07 UTC (permalink / raw
To: gentoo-commits
commit: 73d4d6904c67337dd3af6524079dcd3cf6cb5c51
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Jul 28 20:06:25 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Jul 28 20:06:25 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=73d4d690
sys-libs/ncurses: arm stable wrt bug #690050
Package-Manager: Portage-2.3.66, Repoman-2.3.16
RepoMan-Options: --include-arches="arm"
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index b93f4a410e6..f72c2ab2d89 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha amd64 ~arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-28 20:07 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2019-07-28 20:07 UTC (permalink / raw
To: gentoo-commits
commit: 4052c8230305b81ce333dc8a85bc2f6e1380642a
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Jul 28 20:07:04 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Jul 28 20:07:04 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4052c823
sys-libs/ncurses: sh stable wrt bug #690050
Package-Manager: Portage-2.3.66, Repoman-2.3.16
RepoMan-Options: --include-arches="sh"
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 574c51f14e7..a9a949c7508 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 ~riscv s390 sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-21 14:55 Aaron Bauman
0 siblings, 0 replies; 213+ messages in thread
From: Aaron Bauman @ 2019-07-21 14:55 UTC (permalink / raw
To: gentoo-commits
commit: fc112ad6504e30d61bcab6ba4ef449b79c177c71
Author: Aaron Bauman <bman <AT> gentoo <DOT> org>
AuthorDate: Sun Jul 21 14:55:33 2019 +0000
Commit: Aaron Bauman <bman <AT> gentoo <DOT> org>
CommitDate: Sun Jul 21 14:55:33 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=fc112ad6
sys-libs/ncurses: arm64 stable (bug #690050)
Signed-off-by: Aaron Bauman <bman <AT> gentoo.org>
Package-Manager: Portage-2.3.69, Repoman-2.3.16
RepoMan-Options: --include-arches="arm64"
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 59624e859e3..b93f4a410e6 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha amd64 ~arm ~arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 ~arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-21 8:16 Sergei Trofimovich
0 siblings, 0 replies; 213+ messages in thread
From: Sergei Trofimovich @ 2019-07-21 8:16 UTC (permalink / raw
To: gentoo-commits
commit: e94add5adc8f36e29bdfccfe8adbcca8964b72a6
Author: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
AuthorDate: Sun Jul 21 08:16:10 2019 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Sun Jul 21 08:16:10 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e94add5a
sys-libs/ncurses: stable 6.1_p20181020 for hppa, bug #690050
Package-Manager: Portage-2.3.69, Repoman-2.3.16
RepoMan-Options: --include-arches="hppa"
Signed-off-by: Sergei Trofimovich <slyfox <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index e34de17f354..59624e859e3 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 ~arm ~arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-19 11:33 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-07-19 11:33 UTC (permalink / raw
To: gentoo-commits
commit: c6b8d70fbd38444244420f0dec20c6bbf1bb39ad
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Fri Jul 19 11:33:39 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Fri Jul 19 11:33:39 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c6b8d70f
sys-libs/ncurses: alpha stable wrt bug #690050
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
Package-Manager: Portage-2.3.66, Repoman-2.3.11
RepoMan-Options: --include-arches="alpha"
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index bc51d81ce9a..e34de17f354 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-18 14:26 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-07-18 14:26 UTC (permalink / raw
To: gentoo-commits
commit: 17a798a52dc05ba2a07723da36ffb54a6212cd0b
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Thu Jul 18 14:26:11 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Thu Jul 18 14:26:11 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=17a798a5
sys-libs/ncurses: sparc stable wrt bug #690050
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
Package-Manager: Portage-2.3.66, Repoman-2.3.11
RepoMan-Options: --include-arches="sparc"
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 9ae7bfec2b0..a60e2f82162 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-18 13:11 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-07-18 13:11 UTC (permalink / raw
To: gentoo-commits
commit: 6d44158a0e8fea56bffa65ad66f36c6d9ff10618
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Thu Jul 18 13:11:12 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Thu Jul 18 13:11:12 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6d44158a
sys-libs/ncurses: ia64 stable wrt bug #690050
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
Package-Manager: Portage-2.3.66, Repoman-2.3.11
RepoMan-Options: --include-arches="ia64"
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 597ee977c7c..9ae7bfec2b0 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-18 13:07 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-07-18 13:07 UTC (permalink / raw
To: gentoo-commits
commit: 162e2e9cd4e8918082bbebcd4285b7521f223a92
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Thu Jul 18 13:07:44 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Thu Jul 18 13:07:44 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=162e2e9c
sys-libs/ncurses: ppc64 stable wrt bug #690050
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
Package-Manager: Portage-2.3.66, Repoman-2.3.11
RepoMan-Options: --include-arches="ppc64"
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 496017a1d9c..597ee977c7c 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~riscv s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-18 13:06 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-07-18 13:06 UTC (permalink / raw
To: gentoo-commits
commit: 5c154c071a784cac1aba1f4b85db79b62ee91341
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Thu Jul 18 13:06:38 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Thu Jul 18 13:06:38 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5c154c07
sys-libs/ncurses: ppc stable wrt bug #690050
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
Package-Manager: Portage-2.3.66, Repoman-2.3.11
RepoMan-Options: --include-arches="ppc"
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 5d1e2efbb2f..496017a1d9c 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~riscv s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-18 7:26 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-07-18 7:26 UTC (permalink / raw
To: gentoo-commits
commit: add7c0e11f49aaf3b891d24576dd20bd7e4b75e3
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Thu Jul 18 07:25:54 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Thu Jul 18 07:25:54 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=add7c0e1
sys-libs/ncurses: x86 stable wrt bug #690050
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
Package-Manager: Portage-2.3.66, Repoman-2.3.11
RepoMan-Options: --include-arches="x86"
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 512f34df1f1..5d1e2efbb2f 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-17 14:03 Agostino Sarubbo
0 siblings, 0 replies; 213+ messages in thread
From: Agostino Sarubbo @ 2019-07-17 14:03 UTC (permalink / raw
To: gentoo-commits
commit: 1ca1ed1326bbd8dcc58d393506e0e418c2fd20fe
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Wed Jul 17 14:03:25 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Wed Jul 17 14:03:25 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1ca1ed13
sys-libs/ncurses: s390 stable wrt bug #690050
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
Package-Manager: Portage-2.3.66, Repoman-2.3.11
RepoMan-Options: --include-arches="s390"
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 4a6b766688b..512f34df1f1 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-17 12:17 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2019-07-17 12:17 UTC (permalink / raw
To: gentoo-commits
commit: 7f815d29cbd9457f67d6763fcb22d1cfa4c2497d
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Wed Jul 17 12:17:14 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Wed Jul 17 12:17:46 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7f815d29
sys-libs/ncurses: amd64 stable wrt bug #690050
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
Package-Manager: Portage-2.3.66, Repoman-2.3.11
RepoMan-Options: --include-arches="amd64"
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index 036e89cc0b6..4a6b766688b 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -19,7 +19,7 @@ fi
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-16 15:13 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2019-07-16 15:13 UTC (permalink / raw
To: gentoo-commits
commit: 5af23de819dd42afa5e23b3851ee66339e4c4866
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Tue Jul 16 15:12:59 2019 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Tue Jul 16 15:13:26 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5af23de8
sys-libs/ncurses: Bump to version 6.1_p20190609
Added ugly workaround against riscv two part libdir symlink issue
Closes: https://bugs.gentoo.org/689240
Package-Manager: Portage-2.3.69, Repoman-2.3.16
Signed-off-by: Lars Wendler <polynomial-c <AT> gentoo.org>
sys-libs/ncurses/Manifest | 1 +
sys-libs/ncurses/ncurses-6.1_p20190609.ebuild | 314 ++++++++++++++++++++++++++
2 files changed, 315 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 5bda543b97c..74a902fae6a 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,3 +1,4 @@
DIST ncurses-5.9.tar.gz 2826473 BLAKE2B 91101b049a5eb6a2674fb86b5eba56515207f490dc7a6348f3194bbc50649717a26aff7a0df64f67ca318b5f244455cd57e760c65b9e551f6ec65b8c035a6ae1 SHA512 d7c5e54b6d4d8b9211f0006ca8786f7609d180cc1aaebf4f25e7e35e12959779cf66447359a602daed625621ca32b0d910d67aef3eb8b6fdc3c373819a88faa1
DIST ncurses-6.1-20181020-patch.sh.bz2 361598 BLAKE2B e74f6b4e81c822ae500724ebe707031d3157190e96256656940241e4485fa3d96669e069e764cecc829d9fccccc11caaab8c68ae489b083ade4f286647ac74af SHA512 e54bf83cae5bae3ddb909b9bbe91f549b366a5c60b6274f6b27a3f28b5f9f1afe7263487db842f8cbc22a93e0ef17f0fd518a0585523116e192174f44423ae4a
+DIST ncurses-6.1-20190609-patch.sh.bz2 602174 BLAKE2B 38b1cb1f376b8fdfddc7cf9ed8e10190dd50fc2315f11eaf3a14c0299167c0e6bbd82a3684fa83d6e8fa6d2f02ea14e88ea065f8bb886905d85788bde13731c0 SHA512 efd009f5087a7b16413b94ce37ad19da0df8974be579b742d57bc64e034792ccf03b9967593a0ac5c90522ccfde4b6d23ef763d6fbeb91a5f327f8d7a0970872
DIST ncurses-6.1.tar.gz 3365395 BLAKE2B 1248a5088bc982d0880cb9550b1192457f6f624937c4b66807668c22a608002ba6c38d876986f2c2b9ee46f91d087c88bc0b19920733e4c7ca0ed8e92d9d47de SHA512 e308af43f8b7e01e98a55f4f6c4ee4d1c39ce09d95399fa555b3f0cdf5fd0db0f4c4d820b4af78a63f6cf6d8627587114a40af48cfc066134b600520808a77ee
diff --git a/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
new file mode 100644
index 00000000000..813175ba13f
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.1_p20190609.ebuild
@@ -0,0 +1,314 @@
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+if [[ "${PV}" == *_p* ]] ; then
+ SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2
+ https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ if [[ "${PV}" == *_p* ]] ; then
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ fi
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ $(usex unicode 'ncursesw' '')
+ $(usex threads 'ncursest' '')
+ $(use unicode && usex threads 'ncursestw' '')
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-aix*) dbuildflags= ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! has_version -b "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(use tinfo && usex unicode 'tinfow' '') \
+ $(usev tinfo)
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ # -FIXME-
+ # Ugly hackaround for riscv having two parts libdir (#689240)
+ # Replace this hack with an official solution once we have one...
+ # -FIXME-
+ dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
+ /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-07-16 15:13 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2019-07-16 15:13 UTC (permalink / raw
To: gentoo-commits
commit: 67af9a55ec2fd0cb325528db1992652ae2925a3a
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Tue Jul 16 13:56:37 2019 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Tue Jul 16 15:13:26 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=67af9a55
sys-libs/ncurses: Fixed HOMEPAGE
Package-Manager: Portage-2.3.69, Repoman-2.3.16
Signed-off-by: Lars Wendler <polynomial-c <AT> gentoo.org>
sys-libs/ncurses/ncurses-5.9-r101.ebuild | 4 ++--
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.1-r3.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r101.ebuild b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
index 78a4d754b0c..8c033aaf885 100644
--- a/sys-libs/ncurses/ncurses-5.9-r101.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2018 Gentoo Foundation
+# Copyright 1999-2019 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
# This version is just for the ABI .5 library
@@ -10,7 +10,7 @@ inherit eutils toolchain-funcs multilib-minimal
MY_PV=${PV:0:3}
MY_P=${PN}-${MY_PV}
DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index 74b089e75f3..ed780c2457c 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -9,7 +9,7 @@ MY_PV=${PV:0:3}
PV_SNAP=${PV:4}
MY_P=${PN}-${MY_PV}
DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
diff --git a/sys-libs/ncurses/ncurses-6.1-r3.ebuild b/sys-libs/ncurses/ncurses-6.1-r3.ebuild
index 8e7235a7b66..3a88d1f7694 100644
--- a/sys-libs/ncurses/ncurses-6.1-r3.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r3.ebuild
@@ -9,7 +9,7 @@ MY_PV=${PV:0:3}
PV_SNAP=${PV:4}
MY_P=${PN}-${MY_PV}
DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index ba84afddf04..036e89cc0b6 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -8,7 +8,7 @@ inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs
MY_PV="${PV:0:3}"
MY_P="${PN}-${MY_PV}"
DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
if [[ "${PV}" == *_p* ]] ; then
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-06-08 22:25 James Le Cuirot
0 siblings, 0 replies; 213+ messages in thread
From: James Le Cuirot @ 2019-06-08 22:25 UTC (permalink / raw
To: gentoo-commits
commit: 7d211604cc83b15d4aed3dc0f04edc6c3201c86f
Author: James Le Cuirot <chewi <AT> gentoo <DOT> org>
AuthorDate: Sat Jun 8 22:24:36 2019 +0000
Commit: James Le Cuirot <chewi <AT> gentoo <DOT> org>
CommitDate: Sat Jun 8 22:24:36 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7d211604
sys-libs/ncurses: Fix broken use of ROOT=/ has_version under EAPI 7
Pass -b instead as changing ROOT confuses Portage to the point where
this breaks when building for a ROOTed cross-prefix environment.
Package-Manager: Portage-2.3.67, Repoman-2.3.13
Signed-off-by: James Le Cuirot <chewi <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
index c96c376e5c8..ba84afddf04 100644
--- a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -70,7 +70,7 @@ src_configure() {
# This comes up when cross-compiling, doing multilib builds, upgrading,
# or installing for the first time. Build a local copy of tic whenever
# the host version isn't available. #249363 #557598
- if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ if ! has_version -b "~sys-libs/${P}:0" ; then
local lbuildflags="-static"
# some toolchains don't quite support static linking
@@ -192,7 +192,7 @@ do_configure() {
src_compile() {
# See comments in src_configure.
- if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ if ! has_version -b "~sys-libs/${P}:0" ; then
BUILD_DIR="${WORKDIR}" \
do_compile cross -C progs tic
fi
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-05-21 18:21 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2019-05-21 18:21 UTC (permalink / raw
To: gentoo-commits
commit: ace6b21822a1c2b25ea96c95c1cc9dcd59bede82
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Tue May 21 18:18:27 2019 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Tue May 21 18:21:03 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ace6b218
sys-libs/ncurses: Bump to version 6.1_p20181020
Package-Manager: Portage-2.3.66, Repoman-2.3.12
Signed-off-by: Lars Wendler <polynomial-c <AT> gentoo.org>
sys-libs/ncurses/Manifest | 1 +
sys-libs/ncurses/ncurses-6.1_p20181020.ebuild | 309 ++++++++++++++++++++++++++
2 files changed, 310 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index f7db79467ef..5bda543b97c 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,2 +1,3 @@
DIST ncurses-5.9.tar.gz 2826473 BLAKE2B 91101b049a5eb6a2674fb86b5eba56515207f490dc7a6348f3194bbc50649717a26aff7a0df64f67ca318b5f244455cd57e760c65b9e551f6ec65b8c035a6ae1 SHA512 d7c5e54b6d4d8b9211f0006ca8786f7609d180cc1aaebf4f25e7e35e12959779cf66447359a602daed625621ca32b0d910d67aef3eb8b6fdc3c373819a88faa1
+DIST ncurses-6.1-20181020-patch.sh.bz2 361598 BLAKE2B e74f6b4e81c822ae500724ebe707031d3157190e96256656940241e4485fa3d96669e069e764cecc829d9fccccc11caaab8c68ae489b083ade4f286647ac74af SHA512 e54bf83cae5bae3ddb909b9bbe91f549b366a5c60b6274f6b27a3f28b5f9f1afe7263487db842f8cbc22a93e0ef17f0fd518a0585523116e192174f44423ae4a
DIST ncurses-6.1.tar.gz 3365395 BLAKE2B 1248a5088bc982d0880cb9550b1192457f6f624937c4b66807668c22a608002ba6c38d876986f2c2b9ee46f91d087c88bc0b19920733e4c7ca0ed8e92d9d47de SHA512 e308af43f8b7e01e98a55f4f6c4ee4d1c39ce09d95399fa555b3f0cdf5fd0db0f4c4d820b4af78a63f6cf6d8627587114a40af48cfc066134b600520808a77ee
diff --git a/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
new file mode 100644
index 00000000000..c96c376e5c8
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.1_p20181020.ebuild
@@ -0,0 +1,309 @@
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs
+
+MY_PV="${PV:0:3}"
+MY_P="${PN}-${MY_PV}"
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+if [[ "${PV}" == *_p* ]] ; then
+ SRC_URI+=" ftp://ftp.invisible-island.net/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2
+ https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${P/_p/-}-patch.sh.bz2"
+fi
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+
+S=${WORKDIR}/${MY_P}
+
+PATCHES=(
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ if [[ "${PV}" == *_p* ]] ; then
+ eapply "${WORKDIR}"/${P/_p/-}-patch.sh
+ fi
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ $(usex unicode 'ncursesw' '')
+ $(usex threads 'ncursest' '')
+ $(use unicode && usex threads 'ncursestw' '')
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-aix*) dbuildflags= ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(use tinfo && usex unicode 'tinfow' '') \
+ $(usev tinfo)
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ dosym ../share/terminfo /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2019-05-03 23:03 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2019-05-03 23:03 UTC (permalink / raw
To: gentoo-commits
commit: 82ad3fe5fb06fe5da476177dc78cb31ab30b6e52
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Fri May 3 23:03:10 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Fri May 3 23:03:10 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=82ad3fe5
sys-libs/ncurses: Add ~riscv keyword
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
Package-Manager: Portage-2.3.62, Repoman-2.3.11
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 4 ++--
sys-libs/ncurses/ncurses-6.1-r3.ebuild | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index 24152546b4e..74b089e75f3 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2018 Gentoo Foundation
+# Copyright 1999-2019 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=6
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 ~riscv s390 sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
diff --git a/sys-libs/ncurses/ncurses-6.1-r3.ebuild b/sys-libs/ncurses/ncurses-6.1-r3.ebuild
index fa1908d7243..8e7235a7b66 100644
--- a/sys-libs/ncurses/ncurses-6.1-r3.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r3.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2018 Gentoo Foundation
+# Copyright 1999-2019 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI="6"
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-06-25 22:02 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2018-06-25 22:02 UTC (permalink / raw
To: gentoo-commits
commit: ece2759e47b2fa5ec91dd765ed9e918979da6540
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Mon Jun 25 21:37:01 2018 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Mon Jun 25 22:01:13 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ece2759e
sys-libs/ncurses: inherit preserve-libs #645122
Closes: https://bugs.gentoo.org/645122
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index cba17fff6d1..24152546b4e 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -3,7 +3,7 @@
EAPI=6
-inherit flag-o-matic toolchain-funcs multilib-minimal
+inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs
MY_PV=${PV:0:3}
PV_SNAP=${PV:4}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-06-25 22:02 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2018-06-25 22:02 UTC (permalink / raw
To: gentoo-commits
commit: a4fad719c87e66e2bcd90a5db59b25cd2d383555
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Mon Jun 25 21:58:59 2018 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Mon Jun 25 22:01:13 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a4fad719
sys-libs/ncurses: rewrite the /etc/terminfo code & add a few more variants
Clean up the code to include more comments/documentation, and add rxvt
256color variants as well as screen.xterm-256color for newer versions.
sys-libs/ncurses/ncurses-6.1-r3.ebuild | 305 +++++++++++++++++++++++++++++++++
1 file changed, 305 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.1-r3.ebuild b/sys-libs/ncurses/ncurses-6.1-r3.ebuild
new file mode 100644
index 00000000000..fa1908d7243
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.1-r3.ebuild
@@ -0,0 +1,305 @@
+# Copyright 1999-2018 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="6"
+
+inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs
+
+MY_PV=${PV:0:3}
+PV_SNAP=${PV:4}
+MY_P=${PN}-${MY_PV}
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1"
+
+S=${WORKDIR}/${MY_P}
+
+PATCHES=(
+ "${FILESDIR}/${PN}-6.0-gfbsd.patch"
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
+ "${FILESDIR}/${PN}-6.1-st07_terminfo_typo.patch" #651494
+)
+
+src_prepare() {
+ [[ -n ${PV_SNAP} ]] && eapply "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ $(usex unicode 'ncursesw' '')
+ $(usex threads 'ncursest' '')
+ $(use unicode && usex threads 'ncursestw' '')
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-aix*) dbuildflags= ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # Enable installation of .pc files.
+ --enable-pc-files
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files || die
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(use tinfo && usex unicode 'tinfow' '') \
+ $(usev tinfo)
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
+
+ # Build fails to create this ...
+ dosym ../share/terminfo /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc for embedded/recovery. #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local terms=(
+ # Dumb/simple values that show up when using the in-kernel VT.
+ ansi console dumb linux
+ vt{52,100,102,200,220}
+ # [u]rxvt users used to be pretty common. Probably should drop this
+ # since upstream is dead and people are moving away from it.
+ rxvt{,-unicode}{,-256color}
+ # xterm users are common, as is terminals re-using/spoofing it.
+ xterm xterm-{,256}color
+ # screen is common (and reused by tmux).
+ screen{,-256color}
+ screen.xterm-256color
+ )
+ local x
+ for x in "${terms[@]}"; do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename "$(dirname "${termfile}")")
+
+ if [[ -n ${termfile} ]] ; then
+ dodir "/etc/terminfo/${basedir}"
+ mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
+ dosym "../../../../etc/terminfo/${basedir}/${x}" \
+ "/usr/share/terminfo/${basedir}/${x}"
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}" || die
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dodoc -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-05-17 8:49 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2018-05-17 8:49 UTC (permalink / raw
To: gentoo-commits
commit: cc319d66126d132d9b48aeed41ed5ea6c8e4e82a
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Thu May 17 08:49:01 2018 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Thu May 17 08:49:13 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=cc319d66
sys-libs/ncurses: more || die, dohtml -> dodoc
Package-Manager: Portage-2.3.24, Repoman-2.3.6
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index 4a58bd1d79b..cba17fff6d1 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -102,7 +102,7 @@ do_configure() {
local target=$1
shift
- mkdir "${BUILD_DIR}/${target}"
+ mkdir "${BUILD_DIR}/${target}" || die
cd "${BUILD_DIR}/${target}" || die
local conf=(
@@ -219,7 +219,7 @@ do_compile() {
# compiled libraries which depends on sources which ...
# Manually delete the pc-files file so the install step will
# create the .pc files we want.
- rm -f misc/pc-files
+ rm -f misc/pc-files || die
emake "$@"
}
@@ -276,11 +276,11 @@ multilib_src_install_all() {
# Because ncurses5-config --terminfo returns the directory we keep it
keepdir /usr/share/terminfo #245374
- cd "${S}"
+ cd "${S}" || die
dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
if use doc ; then
docinto html
- dohtml -r doc/html/
+ dodoc -r doc/html/
fi
}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-04-17 18:56 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2018-04-17 18:56 UTC (permalink / raw
To: gentoo-commits
commit: c94776f9bbcb5e37c8440b59770b8515bbe61bac
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Tue Apr 17 18:55:19 2018 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Tue Apr 17 18:56:11 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c94776f9
sys-libs/ncurses: Security cleanup.
Bug: https://bugs.gentoo.org/624644
Bug: https://bugs.gentoo.org/625830
Bug: https://bugs.gentoo.org/639706
Package-Manager: Portage-2.3.29, Repoman-2.3.9
sys-libs/ncurses/Manifest | 1 -
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 286 --------------------------------
sys-libs/ncurses/ncurses-6.0-r2.ebuild | 295 ---------------------------------
3 files changed, 582 deletions(-)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index e42031303a1..f7db79467ef 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,3 +1,2 @@
DIST ncurses-5.9.tar.gz 2826473 BLAKE2B 91101b049a5eb6a2674fb86b5eba56515207f490dc7a6348f3194bbc50649717a26aff7a0df64f67ca318b5f244455cd57e760c65b9e551f6ec65b8c035a6ae1 SHA512 d7c5e54b6d4d8b9211f0006ca8786f7609d180cc1aaebf4f25e7e35e12959779cf66447359a602daed625621ca32b0d910d67aef3eb8b6fdc3c373819a88faa1
-DIST ncurses-6.0.tar.gz 3131891 BLAKE2B 68670ebdaba28c7a750631da01a0e3681b476cc9e9ae6fd9eae5a254f41fab5f1a5df5fa9897a92d1da751f1cc0b72f2ffee4603865900e67fcbb949c102cf78 SHA512 9ec194f4783dae6de8c529cac31b5cfbfcfea212c5d47b1f87cd49df013e38f8580a9e7aa1384918df0921b4ba999d5e73eb6d6362cce2d7287e64308b673963
DIST ncurses-6.1.tar.gz 3365395 BLAKE2B 1248a5088bc982d0880cb9550b1192457f6f624937c4b66807668c22a608002ba6c38d876986f2c2b9ee46f91d087c88bc0b19920733e4c7ca0ed8e92d9d47de SHA512 e308af43f8b7e01e98a55f4f6c4ee4d1c39ce09d95399fa555b3f0cdf5fd0db0f4c4d820b4af78a63f6cf6d8627587114a40af48cfc066134b600520808a77ee
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
deleted file mode 100644
index 562662fc29b..00000000000
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ /dev/null
@@ -1,286 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="5"
-
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal
-
-MY_PV=${PV:0:3}
-PV_SNAP=${PV:4}
-MY_P=${PN}-${MY_PV}
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
- !app-emulation/emul-linux-x86-baselibs"
-
-S=${WORKDIR}/${MY_P}
-
-PATCHES=(
- "${FILESDIR}/${PN}-6.0-gfbsd.patch"
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
-)
-
-src_prepare() {
- [[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
- epatch "${PATCHES[@]}"
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- $(usex unicode 'ncursesw' '')
- $(usex threads 'ncursest' '')
- $(use unicode && usex threads 'ncursestw' '')
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-aix*) dbuildflags= ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}"
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # ncurses is dumb and doesn't install .pc files unless pkg-config
- # is also installed. Force the tests to go our way. Note that it
- # doesn't actually use pkg-config ... it just looks for set vars.
- --enable-pc-files
- --with-pkg-config="$(tc-getPKG_CONFIG)"
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE=${S} \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
- fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -delete
-
- # Build fails to create this ...
- dosym ../share/terminfo /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in ansi console dumb linux rxvt rxvt-unicode screen sun vt{52,100,102,200,220} \
- xterm xterm-color xterm-xfree86
- do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename $(dirname "${termfile}"))
-
- if [[ -n ${termfile} ]] ; then
- dodir /etc/terminfo/${basedir}
- mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
- dosym ../../../../etc/terminfo/${basedir}/${x} \
- /usr/share/terminfo/${basedir}/${x}
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
- doenvd "${T}"/50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}"
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- use doc && dohtml -r doc/html/
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.0-r2.ebuild b/sys-libs/ncurses/ncurses-6.0-r2.ebuild
deleted file mode 100644
index 6587f1b72a6..00000000000
--- a/sys-libs/ncurses/ncurses-6.0-r2.ebuild
+++ /dev/null
@@ -1,295 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="5"
-
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal
-
-MY_PV=${PV:0:3}
-PV_SNAP=${PV:4}
-MY_P=${PN}-${MY_PV}
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
- !app-emulation/emul-linux-x86-baselibs"
-
-S=${WORKDIR}/${MY_P}
-
-PATCHES=(
- "${FILESDIR}/${PN}-6.0-gfbsd.patch"
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
-)
-
-src_prepare() {
- [[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
- epatch "${PATCHES[@]}"
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- $(usex unicode 'ncursesw' '')
- $(usex threads 'ncursest' '')
- $(use unicode && usex threads 'ncursestw' '')
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-aix*) dbuildflags= ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}"
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # ncurses is dumb and doesn't install .pc files unless pkg-config
- # is also installed. Force the tests to go our way. Note that it
- # doesn't actually use pkg-config ... it just looks for set vars.
- # This is fixed in newer versions:
- # https://lists.gnu.org/archive/html/bug-ncurses/2015-08/msg00026.html
- --enable-pc-files
- --with-pkg-config="$(tc-getPKG_CONFIG)"
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- # Required for building on mingw-w64, and possibly other windows
- # platforms, bug #639670
- $(use_enable kernel_Winnt term-driver)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE=${S} \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
- fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- # don't delete '*.dll.a', needed for linking #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- dosym ../share/terminfo /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local x
- for x in ansi console dumb linux rxvt rxvt-unicode screen{,-256color} vt{52,100,102,200,220} \
- xterm xterm-{,256}color
- do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename $(dirname "${termfile}"))
-
- if [[ -n ${termfile} ]] ; then
- dodir /etc/terminfo/${basedir}
- mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
- dosym ../../../../etc/terminfo/${basedir}/${x} \
- /usr/share/terminfo/${basedir}/${x}
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
- doenvd "${T}"/50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}"
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- use doc && dohtml -r doc/html/
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-04-17 17:58 Thomas Deutschmann
0 siblings, 0 replies; 213+ messages in thread
From: Thomas Deutschmann @ 2018-04-17 17:58 UTC (permalink / raw
To: gentoo-commits
commit: 1693e1a46aecc17bc12f605953a08771144f3f47
Author: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
AuthorDate: Tue Apr 17 17:57:49 2018 +0000
Commit: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
CommitDate: Tue Apr 17 17:57:49 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1693e1a4
sys-libs/ncurses: m68k/s390/sh stable (bug #639706)
Package-Manager: Portage-2.3.28, Repoman-2.3.9
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index fcf33051057..a13f47d42f2 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-04-15 17:01 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2018-04-15 17:01 UTC (permalink / raw
To: gentoo-commits
commit: 41ba79b8cb7ef6a38b9c79df82a05c4e519a6769
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 15 17:01:02 2018 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Apr 15 17:01:02 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=41ba79b8
sys-libs/ncurses: arm stable wrt bug #639706
Package-Manager: Portage-2.3.24, Repoman-2.3.6
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index 94a5bfa5cb5..fcf33051057 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha amd64 ~arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-04-08 6:54 Matt Turner
0 siblings, 0 replies; 213+ messages in thread
From: Matt Turner @ 2018-04-08 6:54 UTC (permalink / raw
To: gentoo-commits
commit: 239e2e54f1edb2f1a66243cf3c8900b9f622fe57
Author: Matt Turner <mattst88 <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 8 06:54:14 2018 +0000
Commit: Matt Turner <mattst88 <AT> gentoo <DOT> org>
CommitDate: Sun Apr 8 06:54:14 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=239e2e54
sys-libs/ncurses-6.1-r2: alpha stable, bug 639706
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index fab7bc17660..94a5bfa5cb5 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 ~arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-03-31 9:38 Jeroen Roovers
0 siblings, 0 replies; 213+ messages in thread
From: Jeroen Roovers @ 2018-03-31 9:38 UTC (permalink / raw
To: gentoo-commits
commit: acb2cee0e20bd3943186234a8ebba17540daf7e6
Author: Jeroen Roovers <jer <AT> gentoo <DOT> org>
AuthorDate: Sat Mar 31 09:38:29 2018 +0000
Commit: Jeroen Roovers <jer <AT> gentoo <DOT> org>
CommitDate: Sat Mar 31 09:38:29 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=acb2cee0
sys-libs/ncurses: Stable for HPPA too.
Package-Manager: Portage-2.3.27, Repoman-2.3.9
RepoMan-Options: --ignore-arches
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index b091982522c..fab7bc17660 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-03-28 19:45 Mart Raudsepp
0 siblings, 0 replies; 213+ messages in thread
From: Mart Raudsepp @ 2018-03-28 19:45 UTC (permalink / raw
To: gentoo-commits
commit: 9eac6aceaef6dd4c8c82371e7a3bf3317c5aaadb
Author: Mart Raudsepp <leio <AT> gentoo <DOT> org>
AuthorDate: Wed Mar 28 19:20:09 2018 +0000
Commit: Mart Raudsepp <leio <AT> gentoo <DOT> org>
CommitDate: Wed Mar 28 19:42:39 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9eac6ace
sys-libs/ncursess-6.1-r2: arm64 stable (bug #639706)
Package-Manager: Portage-2.3.19, Repoman-2.3.6
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index de2e2215067..b091982522c 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-03-28 7:47 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2018-03-28 7:47 UTC (permalink / raw
To: gentoo-commits
commit: fc3a9c5ebff98664ab50c9a8ff4e136bea9bd0db
Author: Marty E. Plummer <hanetzer <AT> protonmail <DOT> com>
AuthorDate: Wed Sep 20 09:09:33 2017 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Wed Mar 28 07:46:50 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=fc3a9c5e
sys-libs/ncurses: fix mingw-w64 build and runtime
*.dll.a files are required for linking on mingw-w64 targets, only delete
normal static libraries.
--enable-term-driver is required on mingw-w64, otherwise you get a host
of undefined reference to `_nc_*' errors, and possibly other windows
platforms/runtimes/toolchains.
Bug: https://bugs.gentoo.org/631468
Bug: https://bugs.gentoo.org/639670
Package-Manager: Portage-2.3.10, Repoman-2.3.3
Signed-off-by: Marty E. Plummer <hanetzer <AT> protonmail.com>
Closes: https://github.com/gentoo/gentoo/pull/5734
sys-libs/ncurses/ncurses-6.0-r2.ebuild | 8 +++++++-
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 8 +++++++-
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r2.ebuild b/sys-libs/ncurses/ncurses-6.0-r2.ebuild
index 15d435938bc..6587f1b72a6 100644
--- a/sys-libs/ncurses/ncurses-6.0-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r2.ebuild
@@ -135,6 +135,9 @@ do_configure() {
# The configure script uses ldd to parse the linked output which
# is flaky for cross-compiling/multilib/ldd versions/etc...
$(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
--disable-termcap
--enable-symlinks
--with-rcs-ids
@@ -240,7 +243,10 @@ multilib_src_install() {
# Provide a link for -lcurses.
ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -delete
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
# Build fails to create this ...
dosym ../share/terminfo /usr/$(get_libdir)/terminfo
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index 5ddb8866751..de2e2215067 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -132,6 +132,9 @@ do_configure() {
# The configure script uses ldd to parse the linked output which
# is flaky for cross-compiling/multilib/ldd versions/etc...
$(use_with gpm gpm libgpm.so.1)
+ # Required for building on mingw-w64, and possibly other windows
+ # platforms, bug #639670
+ $(use_enable kernel_Winnt term-driver)
--disable-termcap
--enable-symlinks
--with-rcs-ids
@@ -238,7 +241,10 @@ multilib_src_install() {
# Provide a link for -lcurses.
ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -delete
+ # don't delete '*.dll.a', needed for linking #631468
+ if ! use static-libs; then
+ find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
+ fi
# Build fails to create this ...
dosym ../share/terminfo /usr/$(get_libdir)/terminfo
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-03-27 19:07 Sergei Trofimovich
0 siblings, 0 replies; 213+ messages in thread
From: Sergei Trofimovich @ 2018-03-27 19:07 UTC (permalink / raw
To: gentoo-commits
commit: 1fa251eb8276ed0b1d72ca836f560f21a343c079
Author: Rolf Eike Beer <eike <AT> sf-mail <DOT> de>
AuthorDate: Tue Mar 27 18:23:43 2018 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Tue Mar 27 19:06:59 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1fa251eb
sys-libs/ncurses: stable 6.1-r2 for sparc, bug #639706
Package-Manager: Portage-2.3.24, Repoman-2.3.6
RepoMan-Options: --include-arches="sparc"
sys-libs/ncurses/ncurses-6.1-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r2.ebuild b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
index 5f066984509..5ddb8866751 100644
--- a/sys-libs/ncurses/ncurses-6.1-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r2.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh sparc x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-03-25 20:22 Sergei Trofimovich
0 siblings, 0 replies; 213+ messages in thread
From: Sergei Trofimovich @ 2018-03-25 20:22 UTC (permalink / raw
To: gentoo-commits
commit: f8d3d9c2e50beaca6e5ceae5b8fb2a8180fd8276
Author: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
AuthorDate: Sun Mar 25 20:21:40 2018 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Sun Mar 25 20:22:20 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f8d3d9c2
sys-libs/ncurses: stable 6.1-r1 for ppc64, bug #639706
Package-Manager: Portage-2.3.24, Repoman-2.3.6
RepoMan-Options: --include-arches="ppc64"
sys-libs/ncurses/ncurses-6.1-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r1.ebuild b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
index d32024f1989..a2305c7c3c3 100644
--- a/sys-libs/ncurses/ncurses-6.1-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-03-25 13:46 Sergei Trofimovich
0 siblings, 0 replies; 213+ messages in thread
From: Sergei Trofimovich @ 2018-03-25 13:46 UTC (permalink / raw
To: gentoo-commits
commit: 63d1c6123bbd2de848696961bc54545edf2fae72
Author: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
AuthorDate: Sun Mar 25 12:55:29 2018 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Sun Mar 25 13:46:46 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=63d1c612
sys-libs/ncurses: stable 6.1-r1 for ppc, bug #639706
Package-Manager: Portage-2.3.24, Repoman-2.3.6
RepoMan-Options: --include-arches="ppc"
sys-libs/ncurses/ncurses-6.1-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r1.ebuild b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
index 5daa060c7c9..d32024f1989 100644
--- a/sys-libs/ncurses/ncurses-6.1-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-03-24 21:19 Sergei Trofimovich
0 siblings, 0 replies; 213+ messages in thread
From: Sergei Trofimovich @ 2018-03-24 21:19 UTC (permalink / raw
To: gentoo-commits
commit: 2cb15f761d84cb5872fbcfede3c0dceb953911f0
Author: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
AuthorDate: Sat Mar 24 21:19:16 2018 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Sat Mar 24 21:19:16 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2cb15f76
sys-libs/ncurses: stable 6.1-r1 for ia64, bug #639706
Package-Manager: Portage-2.3.24, Repoman-2.3.6
RepoMan-Options: --include-arches="ia64"
sys-libs/ncurses/ncurses-6.1-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r1.ebuild b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
index cbdc9b1d84a..5daa060c7c9 100644
--- a/sys-libs/ncurses/ncurses-6.1-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-03-24 8:00 Mikle Kolyada
0 siblings, 0 replies; 213+ messages in thread
From: Mikle Kolyada @ 2018-03-24 8:00 UTC (permalink / raw
To: gentoo-commits
commit: b8860edbac3dec9a90b8635857cf51a765a11446
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Mar 24 07:59:17 2018 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Mar 24 07:59:57 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b8860edb
sys-libs/ncurses: amd64 stable wrt bug #639706
Package-Manager: Portage-2.3.24, Repoman-2.3.6
sys-libs/ncurses/ncurses-6.1-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r1.ebuild b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
index fffbdd92da9..cbdc9b1d84a 100644
--- a/sys-libs/ncurses/ncurses-6.1-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
@@ -15,7 +15,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-02-21 14:52 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2018-02-21 14:52 UTC (permalink / raw
To: gentoo-commits
commit: 4e83f450bfe1a968b5aa0aab47799f53f62e51a4
Author: Arfrever Frehtes Taifersar Arahesis <arfrever.fta <AT> gmail <DOT> com>
AuthorDate: Wed Feb 21 14:51:04 2018 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Wed Feb 21 14:52:22 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4e83f450
sys-libs/ncurses: Slight ebuild simplification.
Package-Manager: Portage-2.3.24, Repoman-2.3.6
sys-libs/ncurses/ncurses-6.1-r1.ebuild | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.1-r1.ebuild b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
index 2e95e356ae2..fffbdd92da9 100644
--- a/sys-libs/ncurses/ncurses-6.1-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
@@ -114,13 +114,8 @@ do_configure() {
# Disabled until #245417 is sorted out.
#$(use_with berkdb hashed-db)
- # ncurses is dumb and doesn't install .pc files unless pkg-config
- # is also installed. Force the tests to go our way. Note that it
- # doesn't actually use pkg-config ... it just looks for set vars.
- # This is fixed in newer versions:
- # https://lists.gnu.org/archive/html/bug-ncurses/2015-08/msg00026.html
+ # Enable installation of .pc files.
--enable-pc-files
- --with-pkg-config="$(tc-getPKG_CONFIG)"
# This path is used to control where the .pc files are installed.
--with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-02-21 8:13 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2018-02-21 8:13 UTC (permalink / raw
To: gentoo-commits
commit: aaf71c039b607dc7ee9da2ca3992c14368203307
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Wed Feb 21 08:13:09 2018 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Wed Feb 21 08:13:09 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=aaf71c03
sys-libs/ncurses: Removed old.
Package-Manager: Portage-2.3.24, Repoman-2.3.6
sys-libs/ncurses/ncurses-6.1.ebuild | 293 ------------------------------------
1 file changed, 293 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.1.ebuild b/sys-libs/ncurses/ncurses-6.1.ebuild
deleted file mode 100644
index 69b591e2f70..00000000000
--- a/sys-libs/ncurses/ncurses-6.1.ebuild
+++ /dev/null
@@ -1,293 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-inherit flag-o-matic toolchain-funcs multilib-minimal
-
-MY_PV=${PV:0:3}
-PV_SNAP=${PV:4}
-MY_P=${PN}-${MY_PV}
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
- !app-emulation/emul-linux-x86-baselibs"
-
-S=${WORKDIR}/${MY_P}
-
-PATCHES=(
- "${FILESDIR}/${PN}-6.0-gfbsd.patch"
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
- "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
-)
-
-src_prepare() {
- [[ -n ${PV_SNAP} ]] && eapply "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
- default
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- $(usex unicode 'ncursesw' '')
- $(usex threads 'ncursest' '')
- $(use unicode && usex threads 'ncursestw' '')
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-aix*) dbuildflags= ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}"
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # ncurses is dumb and doesn't install .pc files unless pkg-config
- # is also installed. Force the tests to go our way. Note that it
- # doesn't actually use pkg-config ... it just looks for set vars.
- # This is fixed in newer versions:
- # https://lists.gnu.org/archive/html/bug-ncurses/2015-08/msg00026.html
- --enable-pc-files
- --with-pkg-config="$(tc-getPKG_CONFIG)"
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- CONFIG_SHELL=${EPREFIX}/bin/bash \
- ECONF_SOURCE="${S}" \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
- fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -delete
-
- # Build fails to create this ...
- dosym ../share/terminfo /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- local x
- for x in ansi console dumb linux rxvt rxvt-unicode screen{,-256color} vt{52,100,102,200,220} \
- xterm xterm-{,256}color
- do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename $(dirname "${termfile}"))
-
- if [[ -n ${termfile} ]] ; then
- dodir /etc/terminfo/${basedir}
- mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
- dosym ../../../../etc/terminfo/${basedir}/${x} \
- /usr/share/terminfo/${basedir}/${x}
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
- doenvd "${T}"/50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}"
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dohtml -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-02-21 5:19 Jeroen Roovers
0 siblings, 0 replies; 213+ messages in thread
From: Jeroen Roovers @ 2018-02-21 5:19 UTC (permalink / raw
To: gentoo-commits
commit: 8fd039c82d606c1e5ff006449a6105128d47456e
Author: Jeroen Roovers <jer <AT> gentoo <DOT> org>
AuthorDate: Wed Feb 21 05:18:22 2018 +0000
Commit: Jeroen Roovers <jer <AT> gentoo <DOT> org>
CommitDate: Wed Feb 21 05:19:15 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8fd039c8
sys-libs/ncurses: Disable stripping (bug #648314).
Package-Manager: Portage-2.3.24, Repoman-2.3.6
sys-libs/ncurses/ncurses-6.1-r1.ebuild | 294 +++++++++++++++++++++++++++++++++
1 file changed, 294 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.1-r1.ebuild b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
new file mode 100644
index 00000000000..2e95e356ae2
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.1-r1.ebuild
@@ -0,0 +1,294 @@
+# Copyright 1999-2018 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+
+inherit flag-o-matic toolchain-funcs multilib-minimal
+
+MY_PV=${PV:0:3}
+PV_SNAP=${PV:4}
+MY_P=${PN}-${MY_PV}
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
+ !app-emulation/emul-linux-x86-baselibs"
+
+S=${WORKDIR}/${MY_P}
+
+PATCHES=(
+ "${FILESDIR}/${PN}-6.0-gfbsd.patch"
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ [[ -n ${PV_SNAP} ]] && eapply "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ $(usex unicode 'ncursesw' '')
+ $(usex threads 'ncursest' '')
+ $(use unicode && usex threads 'ncursestw' '')
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-aix*) dbuildflags= ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}"
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # ncurses is dumb and doesn't install .pc files unless pkg-config
+ # is also installed. Force the tests to go our way. Note that it
+ # doesn't actually use pkg-config ... it just looks for set vars.
+ # This is fixed in newer versions:
+ # https://lists.gnu.org/archive/html/bug-ncurses/2015-08/msg00026.html
+ --enable-pc-files
+ --with-pkg-config="$(tc-getPKG_CONFIG)"
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ --disable-stripping
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(use tinfo && usex unicode 'tinfow' '') \
+ $(usev tinfo)
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ use static-libs || find "${ED}"/usr/ -name '*.a' -delete
+
+ # Build fails to create this ...
+ dosym ../share/terminfo /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local x
+ for x in ansi console dumb linux rxvt rxvt-unicode screen{,-256color} vt{52,100,102,200,220} \
+ xterm xterm-{,256}color
+ do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename $(dirname "${termfile}"))
+
+ if [[ -n ${termfile} ]] ; then
+ dodir /etc/terminfo/${basedir}
+ mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
+ dosym ../../../../etc/terminfo/${basedir}/${x} \
+ /usr/share/terminfo/${basedir}/${x}
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
+ doenvd "${T}"/50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}"
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dohtml -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-02-20 13:57 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2018-02-20 13:57 UTC (permalink / raw
To: gentoo-commits
commit: cf9086f9c6f00ce835c507f1ac400b825ec3edb4
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Tue Feb 20 13:57:23 2018 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Tue Feb 20 13:57:37 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=cf9086f9
sys-libs/ncurses: Block older sys-libs/slang versions
that are incompatible with new 32bit terminfo format.
Package-Manager: Portage-2.3.24, Repoman-2.3.6
sys-libs/ncurses/ncurses-6.1.ebuild | 1 +
1 file changed, 1 insertion(+)
diff --git a/sys-libs/ncurses/ncurses-6.1.ebuild b/sys-libs/ncurses/ncurses-6.1.ebuild
index 1e12299cee0..69b591e2f70 100644
--- a/sys-libs/ncurses/ncurses-6.1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.1.ebuild
@@ -23,6 +23,7 @@ DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
# Block the older ncurses that installed all files w/SLOT=5. #557472
RDEPEND="${DEPEND}
!<=sys-libs/ncurses-5.9-r4:5
+ !<sys-libs/slang-2.3.2_pre23
!<x11-terms/rxvt-unicode-9.06-r3
!<x11-terms/st-0.6-r1
!app-emulation/emul-linux-x86-baselibs"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-01-28 21:22 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2018-01-28 21:22 UTC (permalink / raw
To: gentoo-commits
commit: c4d1bb725b2bfdd90e2bc1b54960666e2ec5f091
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Sun Jan 28 21:18:55 2018 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Sun Jan 28 21:21:54 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c4d1bb72
sys-libs/ncurses: Bump to version 6.1
Package-Manager: Portage-2.3.20, Repoman-2.3.6
sys-libs/ncurses/Manifest | 1 +
sys-libs/ncurses/ncurses-6.1.ebuild | 292 ++++++++++++++++++++++++++++++++++++
2 files changed, 293 insertions(+)
diff --git a/sys-libs/ncurses/Manifest b/sys-libs/ncurses/Manifest
index 28bbb993e81..e42031303a1 100644
--- a/sys-libs/ncurses/Manifest
+++ b/sys-libs/ncurses/Manifest
@@ -1,2 +1,3 @@
DIST ncurses-5.9.tar.gz 2826473 BLAKE2B 91101b049a5eb6a2674fb86b5eba56515207f490dc7a6348f3194bbc50649717a26aff7a0df64f67ca318b5f244455cd57e760c65b9e551f6ec65b8c035a6ae1 SHA512 d7c5e54b6d4d8b9211f0006ca8786f7609d180cc1aaebf4f25e7e35e12959779cf66447359a602daed625621ca32b0d910d67aef3eb8b6fdc3c373819a88faa1
DIST ncurses-6.0.tar.gz 3131891 BLAKE2B 68670ebdaba28c7a750631da01a0e3681b476cc9e9ae6fd9eae5a254f41fab5f1a5df5fa9897a92d1da751f1cc0b72f2ffee4603865900e67fcbb949c102cf78 SHA512 9ec194f4783dae6de8c529cac31b5cfbfcfea212c5d47b1f87cd49df013e38f8580a9e7aa1384918df0921b4ba999d5e73eb6d6362cce2d7287e64308b673963
+DIST ncurses-6.1.tar.gz 3365395 BLAKE2B 1248a5088bc982d0880cb9550b1192457f6f624937c4b66807668c22a608002ba6c38d876986f2c2b9ee46f91d087c88bc0b19920733e4c7ca0ed8e92d9d47de SHA512 e308af43f8b7e01e98a55f4f6c4ee4d1c39ce09d95399fa555b3f0cdf5fd0db0f4c4d820b4af78a63f6cf6d8627587114a40af48cfc066134b600520808a77ee
diff --git a/sys-libs/ncurses/ncurses-6.1.ebuild b/sys-libs/ncurses/ncurses-6.1.ebuild
new file mode 100644
index 00000000000..1e12299cee0
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.1.ebuild
@@ -0,0 +1,292 @@
+# Copyright 1999-2018 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+
+inherit flag-o-matic toolchain-funcs multilib-minimal
+
+MY_PV=${PV:0:3}
+PV_SNAP=${PV:4}
+MY_P=${PN}-${MY_PV}
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
+ !app-emulation/emul-linux-x86-baselibs"
+
+S=${WORKDIR}/${MY_P}
+
+PATCHES=(
+ "${FILESDIR}/${PN}-6.0-gfbsd.patch"
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ [[ -n ${PV_SNAP} ]] && eapply "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
+ default
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ $(usex unicode 'ncursesw' '')
+ $(usex threads 'ncursest' '')
+ $(use unicode && usex threads 'ncursestw' '')
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-aix*) dbuildflags= ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}"
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # ncurses is dumb and doesn't install .pc files unless pkg-config
+ # is also installed. Force the tests to go our way. Note that it
+ # doesn't actually use pkg-config ... it just looks for set vars.
+ # This is fixed in newer versions:
+ # https://lists.gnu.org/archive/html/bug-ncurses/2015-08/msg00026.html
+ --enable-pc-files
+ --with-pkg-config="$(tc-getPKG_CONFIG)"
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE="${S}" \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(use tinfo && usex unicode 'tinfow' '') \
+ $(usev tinfo)
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ use static-libs || find "${ED}"/usr/ -name '*.a' -delete
+
+ # Build fails to create this ...
+ dosym ../share/terminfo /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local x
+ for x in ansi console dumb linux rxvt rxvt-unicode screen{,-256color} vt{52,100,102,200,220} \
+ xterm xterm-{,256}color
+ do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename $(dirname "${termfile}"))
+
+ if [[ -n ${termfile} ]] ; then
+ dodir /etc/terminfo/${basedir}
+ mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
+ dosym ../../../../etc/terminfo/${basedir}/${x} \
+ /usr/share/terminfo/${basedir}/${x}
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
+ doenvd "${T}"/50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}"
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ if use doc ; then
+ docinto html
+ dohtml -r doc/html/
+ fi
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-01-20 18:34 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2018-01-20 18:34 UTC (permalink / raw
To: gentoo-commits
commit: 2fdaad243548fc10d6db9297d579c34fd6eeef15
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Sat Jan 20 18:33:22 2018 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Sat Jan 20 18:33:53 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2fdaad24
sys-libs/ncurses: add upstream note about pc file bug workaround
sys-libs/ncurses/ncurses-6.0-r2.ebuild | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.0-r2.ebuild b/sys-libs/ncurses/ncurses-6.0-r2.ebuild
index 9051223ca37..250619a40dd 100644
--- a/sys-libs/ncurses/ncurses-6.0-r2.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r2.ebuild
@@ -116,6 +116,8 @@ do_configure() {
# ncurses is dumb and doesn't install .pc files unless pkg-config
# is also installed. Force the tests to go our way. Note that it
# doesn't actually use pkg-config ... it just looks for set vars.
+ # This is fixed in newer versions:
+ # https://lists.gnu.org/archive/html/bug-ncurses/2015-08/msg00026.html
--enable-pc-files
--with-pkg-config="$(tc-getPKG_CONFIG)"
# This path is used to control where the .pc files are installed.
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2018-01-02 11:08 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2018-01-02 11:08 UTC (permalink / raw
To: gentoo-commits
commit: 961bf0f53a7ac66bd84021d8e5e093f54cf5d972
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Tue Jan 2 10:37:16 2018 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Tue Jan 2 10:51:44 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=961bf0f5
sys-libs/ncurses: modernize the fallback terminal list
We drop "sun" and "xterm-xfree86" as it's unlikely anyone uses those
anymore in fallback scenarios. We add {screen,xterm}-256color as those
are fairly common defaults. The size delta is negligible.
sys-libs/ncurses/ncurses-6.0-r2.ebuild | 287 +++++++++++++++++++++++++++++++++
1 file changed, 287 insertions(+)
diff --git a/sys-libs/ncurses/ncurses-6.0-r2.ebuild b/sys-libs/ncurses/ncurses-6.0-r2.ebuild
new file mode 100644
index 00000000000..9051223ca37
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-6.0-r2.ebuild
@@ -0,0 +1,287 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="5"
+
+inherit eutils flag-o-matic toolchain-funcs multilib-minimal
+
+MY_PV=${PV:0:3}
+PV_SNAP=${PV:4}
+MY_P=${PN}-${MY_PV}
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="0/6"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-5.9-r4:5
+ !<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
+ !app-emulation/emul-linux-x86-baselibs"
+
+S=${WORKDIR}/${MY_P}
+
+PATCHES=(
+ "${FILESDIR}/${PN}-6.0-gfbsd.patch"
+ "${FILESDIR}/${PN}-5.7-nongnu.patch"
+ "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
+ "${FILESDIR}/${PN}-6.0-pkg-config.patch"
+ "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
+ "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
+ "${FILESDIR}/${PN}-6.0-cppflags-cross.patch" #601426
+)
+
+src_prepare() {
+ [[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
+ epatch "${PATCHES[@]}"
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ $(usex unicode 'ncursesw' '')
+ $(usex threads 'ncursest' '')
+ $(use unicode && usex threads 'ncursestw' '')
+ )
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ *-aix*) dbuildflags= ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
+ do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}"
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # ncurses is dumb and doesn't install .pc files unless pkg-config
+ # is also installed. Force the tests to go our way. Note that it
+ # doesn't actually use pkg-config ... it just looks for set vars.
+ --enable-pc-files
+ --with-pkg-config="$(tc-getPKG_CONFIG)"
+ # This path is used to control where the .pc files are installed.
+ --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ --with-cxx-shared
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-hard-tabs
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(multilib_native_with progs)
+ $(use_with test tests)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ CONFIG_SHELL=${EPREFIX}/bin/bash \
+ ECONF_SOURCE=${S} \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}" \
+ $(use tinfo && usex unicode 'tinfow' '') \
+ $(usev tinfo)
+ fi
+ if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
+ ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
+ fi
+ use static-libs || find "${ED}"/usr/ -name '*.a' -delete
+
+ # Build fails to create this ...
+ dosym ../share/terminfo /usr/$(get_libdir)/terminfo
+}
+
+multilib_src_install_all() {
+# if ! use berkdb ; then
+ # We need the basic terminfo files in /etc, bug #37026
+ einfo "Installing basic terminfo files in /etc..."
+ local x
+ for x in ansi console dumb linux rxvt rxvt-unicode screen{,-256color} vt{52,100,102,200,220} \
+ xterm xterm-{,256}color
+ do
+ local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
+ local basedir=$(basename $(dirname "${termfile}"))
+
+ if [[ -n ${termfile} ]] ; then
+ dodir /etc/terminfo/${basedir}
+ mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
+ dosym ../../../../etc/terminfo/${basedir}/${x} \
+ /usr/share/terminfo/${basedir}/${x}
+ fi
+ done
+# fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
+ doenvd "${T}"/50ncurses
+
+ use minimal && rm -r "${ED}"/usr/share/terminfo*
+ # Because ncurses5-config --terminfo returns the directory we keep it
+ keepdir /usr/share/terminfo #245374
+
+ cd "${S}"
+ dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
+ use doc && dohtml -r doc/html/
+}
+
+pkg_preinst() {
+ preserve_old_lib /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
+}
+
+pkg_postinst() {
+ preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
+ use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2017-12-31 21:49 Michał Górny
0 siblings, 0 replies; 213+ messages in thread
From: Michał Górny @ 2017-12-31 21:49 UTC (permalink / raw
To: gentoo-commits
commit: 00ed64aebc52061bedaaf0511b041f388315beb9
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Sun Dec 31 09:48:51 2017 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Sun Dec 31 21:48:06 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=00ed64ae
sys-libs/ncurses: Stop using awful multijob_* logic
The multijob logic adds a lot of complex, unmaintained and fragile bash
code with little gain. Moreover, makes build logs unreadable
by interspersing output from multiple configure runs.
Bug: https://bugs.gentoo.org/613322
sys-libs/ncurses/ncurses-5.9-r101.ebuild | 11 ++++-------
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 9 +++------
2 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r101.ebuild b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
index 76b8a76d3a7..c722d68f320 100644
--- a/sys-libs/ncurses/ncurses-5.9-r101.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
@@ -1,11 +1,11 @@
-# Copyright 1999-2015 Gentoo Foundation
+# Copyright 1999-2017 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# This version is just for the ABI .5 library
EAPI="5"
-inherit eutils toolchain-funcs multilib-minimal multiprocessing
+inherit eutils toolchain-funcs multilib-minimal
MY_PV=${PV:0:3}
MY_P=${PN}-${MY_PV}
@@ -55,8 +55,6 @@ src_configure() {
$(usex unicode 'ncursesw' '')
)
- multijob_init
-
# When installing ncurses, we have to use a compatible version of tic.
# This comes up when cross-compiling, doing multilib builds, upgrading,
# or installing for the first time. Build a local copy of tic whenever
@@ -69,16 +67,15 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} -static" \
- multijob_child_init do_configure cross --without-shared --with-normal
+ do_configure cross --without-shared --with-normal
fi
multilib-minimal_src_configure
- multijob_finish
}
multilib_src_configure() {
local t
for t in "${NCURSES_TARGETS[@]}" ; do
- multijob_child_init do_configure "${t}"
+ do_configure "${t}"
done
}
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index 2ab63de41d4..d98b23afb75 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -3,7 +3,7 @@
EAPI="5"
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal multiprocessing
+inherit eutils flag-o-matic toolchain-funcs multilib-minimal
MY_PV=${PV:0:3}
PV_SNAP=${PV:4}
@@ -61,8 +61,6 @@ src_configure() {
$(use unicode && usex threads 'ncursestw' '')
)
- multijob_init
-
# When installing ncurses, we have to use a compatible version of tic.
# This comes up when cross-compiling, doing multilib builds, upgrading,
# or installing for the first time. Build a local copy of tic whenever
@@ -87,16 +85,15 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- multijob_child_init do_configure cross --without-shared --with-normal
+ do_configure cross --without-shared --with-normal
fi
multilib-minimal_src_configure
- multijob_finish
}
multilib_src_configure() {
local t
for t in "${NCURSES_TARGETS[@]}" ; do
- multijob_child_init do_configure "${t}"
+ do_configure "${t}"
done
}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2017-03-09 5:01 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2017-03-09 5:01 UTC (permalink / raw
To: gentoo-commits
commit: 94f99af61ba52171a74feccf91a0f387ddecf7ae
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Thu Mar 9 04:56:33 2017 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Thu Mar 9 04:57:50 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=94f99af6
sys-libs/ncurses: drop old versions with funky SLOTs
sys-libs/ncurses/ncurses-5.9-r3.ebuild | 225 -------------------------------
sys-libs/ncurses/ncurses-5.9-r4.ebuild | 230 -------------------------------
sys-libs/ncurses/ncurses-5.9-r5.ebuild | 232 --------------------------------
sys-libs/ncurses/ncurses-5.9-r99.ebuild | 20 ---
sys-libs/ncurses/ncurses-6.0.ebuild | 20 ---
5 files changed, 727 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r3.ebuild b/sys-libs/ncurses/ncurses-5.9-r3.ebuild
deleted file mode 100644
index 2d540b0ae87..00000000000
--- a/sys-libs/ncurses/ncurses-5.9-r3.ebuild
+++ /dev/null
@@ -1,225 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="4"
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal
-
-MY_PV=${PV:0:3}
-PV_SNAP=${PV:4}
-MY_P=${PN}-${MY_PV}
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-LICENSE="MIT"
-SLOT="0"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs tinfo trace unicode"
-
-DEPEND="gpm? ( sys-libs/gpm )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<x11-terms/rxvt-unicode-9.06-r3
- abi_x86_32? (
- !<=app-emulation/emul-linux-x86-baselibs-20130224-r12
- !app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)]
- )"
-# Put the MULTILIB_USEDEP on gpm in PDEPEND only to avoid circular deps.
-# We can move it to DEPEND and drop the --with-gpm=libgpm.so.1 from the econf
-# line below once we can assume multilib gpm is available everywhere.
-PDEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-
-S=${WORKDIR}/${MY_P}
-HOSTTIC_DIR=${WORKDIR}/${P}-host
-
-src_prepare() {
- [[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
- epatch "${FILESDIR}"/${PN}-5.8-gfbsd.patch
- epatch "${FILESDIR}"/${PN}-5.7-nongnu.patch
- epatch "${FILESDIR}"/${PN}-5.9-rxvt-unicode-9.15.patch #192083 #383871
- epatch "${FILESDIR}"/${PN}-5.9-fix-clang-build.patch #417763
- epatch "${FILESDIR}"/${PN}-5.9-pkg-config.patch
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} -static" \
- BUILD_DIR="${HOSTTIC_DIR}" do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- do_configure narrowc
- use unicode && do_configure widec --enable-widec --includedir="${EPREFIX}"/usr/include/ncursesw
-}
-
-do_configure() {
- ECONF_SOURCE=${S}
-
- mkdir "${BUILD_DIR}"-$1
- cd "${BUILD_DIR}"-$1 || die
- shift
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # ncurses is dumb and doesn't install .pc files unless pkg-config
- # is also installed. Force the tests to go our way. Note that it
- # doesn't actually use pkg-config ... it just looks for set vars.
- --enable-pc-files
- --with-pkg-config="$(tc-getPKG_CONFIG)"
- # This path is used to control where the .pc files are installed.
- PKG_CONFIG_LIBDIR="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(use_with trace)
- $(use_with tinfo termlib)
-
- # The chtype/mmask-t settings below are to retain ABI compat
- # with ncurses-5.4 so dont change em !
- --with-chtype=long
- --with-mmask-t=long
- --disable-ext-colors
- --disable-ext-mouse
- --without-pthread
- --without-reentrant
- )
-
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- make_flags="-C progs tic"
- BUILD_DIR="${HOSTTIC_DIR}" do_compile cross
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- make_flags=""
- multilib_is_native_abi || make_flags="PROGS= "
- do_compile narrowc
- use unicode && do_compile widec
-}
-
-do_compile() {
- cd "${BUILD_DIR}"-$1 || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files
- emake ${make_flags}
-}
-
-multilib_src_install() {
- # use the cross-compiled tic (if need be) #249363
- export PATH="${HOSTTIC_DIR}-cross/progs:${PATH}"
-
- # install unicode version second so that the binaries in /usr/bin
- # support both wide and narrow
- cd "${BUILD_DIR}"-narrowc || die
- emake DESTDIR="${D}" install
- if use unicode ; then
- cd "${BUILD_DIR}"-widec || die
- emake DESTDIR="${D}" install
- fi
-
- # Move libncurses{,w} into /lib
- gen_usr_ldscript -a \
- ncurses \
- $(usex unicode 'ncursesw' '') \
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
- if ! tc-is-static-only ; then
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -a '!' -name '*curses++*.a' -delete
-
- # Build fails to create this ...
- dosym ../share/terminfo /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in ansi console dumb linux rxvt rxvt-unicode screen sun vt{52,100,102,200,220} \
- xterm xterm-color xterm-xfree86
- do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename $(dirname "${termfile}"))
-
- if [[ -n ${termfile} ]] ; then
- dodir /etc/terminfo/${basedir}
- mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
- dosym ../../../../etc/terminfo/${basedir}/${x} \
- /usr/share/terminfo/${basedir}/${x}
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
- doenvd "${T}"/50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}"
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- use doc && dohtml -r doc/html/
-}
diff --git a/sys-libs/ncurses/ncurses-5.9-r4.ebuild b/sys-libs/ncurses/ncurses-5.9-r4.ebuild
deleted file mode 100644
index 2d4baab203f..00000000000
--- a/sys-libs/ncurses/ncurses-5.9-r4.ebuild
+++ /dev/null
@@ -1,230 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="4"
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal
-
-MY_PV=${PV:0:3}
-PV_SNAP=${PV:4}
-MY_P=${PN}-${MY_PV}
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-LICENSE="MIT"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs tinfo trace unicode"
-
-DEPEND="gpm? ( sys-libs/gpm )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<x11-terms/rxvt-unicode-9.06-r3
- abi_x86_32? (
- !<=app-emulation/emul-linux-x86-baselibs-20130224-r12
- !app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)]
- )"
-# Put the MULTILIB_USEDEP on gpm in PDEPEND only to avoid circular deps.
-# We can move it to DEPEND and drop the --with-gpm=libgpm.so.1 from the econf
-# line below once we can assume multilib gpm is available everywhere.
-PDEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-
-S=${WORKDIR}/${MY_P}
-HOSTTIC_DIR=${WORKDIR}/${P}-host
-
-src_prepare() {
- [[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
- epatch "${FILESDIR}"/${PN}-5.8-gfbsd.patch
- epatch "${FILESDIR}"/${PN}-5.7-nongnu.patch
- epatch "${FILESDIR}"/${PN}-5.9-rxvt-unicode-9.15.patch #192083 #383871
- epatch "${FILESDIR}"/${PN}-5.9-fix-clang-build.patch #417763
- epatch "${FILESDIR}"/${PN}-5.9-pkg-config.patch
- epatch "${FILESDIR}"/${P}-no-I-usr-include.patch #522586
- epatch "${FILESDIR}"/${P}-gcc-5.patch #545114
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} -static" \
- BUILD_DIR="${HOSTTIC_DIR}" do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- do_configure narrowc
- use unicode && do_configure widec --enable-widec --includedir="${EPREFIX}"/usr/include/ncursesw
-}
-
-do_configure() {
- ECONF_SOURCE=${S}
-
- mkdir "${BUILD_DIR}"-$1
- cd "${BUILD_DIR}"-$1 || die
- shift
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # ncurses is dumb and doesn't install .pc files unless pkg-config
- # is also installed. Force the tests to go our way. Note that it
- # doesn't actually use pkg-config ... it just looks for set vars.
- --enable-pc-files
- --with-pkg-config="$(tc-getPKG_CONFIG)"
- # This path is used to control where the .pc files are installed.
- PKG_CONFIG_LIBDIR="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(use_with trace)
- $(use_with tinfo termlib)
-
- # The chtype/mmask-t settings below are to retain ABI compat
- # with ncurses-5.4 so dont change em !
- --with-chtype=long
- --with-mmask-t=long
- --disable-ext-colors
- --disable-ext-mouse
- --without-pthread
- --without-reentrant
- )
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- CONFIG_SHELL=/bin/bash econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- make_flags="-C progs tic"
- BUILD_DIR="${HOSTTIC_DIR}" do_compile cross
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- make_flags=""
- multilib_is_native_abi || make_flags="PROGS= "
- do_compile narrowc
- use unicode && do_compile widec
-}
-
-do_compile() {
- cd "${BUILD_DIR}"-$1 || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files
- emake ${make_flags}
-}
-
-multilib_src_install() {
- # use the cross-compiled tic (if need be) #249363
- export PATH="${HOSTTIC_DIR}-cross/progs:${PATH}"
-
- # install unicode version second so that the binaries in /usr/bin
- # support both wide and narrow
- cd "${BUILD_DIR}"-narrowc || die
- emake DESTDIR="${D}" install
- if use unicode ; then
- cd "${BUILD_DIR}"-widec || die
- emake DESTDIR="${D}" install
- fi
-
- # Move libncurses{,w} into /lib
- gen_usr_ldscript -a \
- ncurses \
- $(usex unicode 'ncursesw' '') \
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
- if ! tc-is-static-only ; then
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -a '!' -name '*curses++*.a' -delete
-
- # Build fails to create this ...
- dosym ../share/terminfo /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in ansi console dumb linux rxvt rxvt-unicode screen sun vt{52,100,102,200,220} \
- xterm xterm-color xterm-xfree86
- do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename $(dirname "${termfile}"))
-
- if [[ -n ${termfile} ]] ; then
- dodir /etc/terminfo/${basedir}
- mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
- dosym ../../../../etc/terminfo/${basedir}/${x} \
- /usr/share/terminfo/${basedir}/${x}
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
- doenvd "${T}"/50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}"
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- use doc && dohtml -r doc/html/
-}
diff --git a/sys-libs/ncurses/ncurses-5.9-r5.ebuild b/sys-libs/ncurses/ncurses-5.9-r5.ebuild
deleted file mode 100644
index 001fc43c297..00000000000
--- a/sys-libs/ncurses/ncurses-5.9-r5.ebuild
+++ /dev/null
@@ -1,232 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="5"
-
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal
-
-MY_PV=${PV:0:3}
-PV_SNAP=${PV:4}
-MY_P=${PN}-${MY_PV}
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/5"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs tinfo trace unicode"
-
-DEPEND="gpm? ( sys-libs/gpm )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<x11-terms/rxvt-unicode-9.06-r3
- abi_x86_32? (
- !<=app-emulation/emul-linux-x86-baselibs-20130224-r12
- !app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)]
- )"
-# Put the MULTILIB_USEDEP on gpm in PDEPEND only to avoid circular deps.
-# We can move it to DEPEND and drop the --with-gpm=libgpm.so.1 from the econf
-# line below once we can assume multilib gpm is available everywhere.
-PDEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-
-S=${WORKDIR}/${MY_P}
-HOSTTIC_DIR=${WORKDIR}/${P}-host
-
-src_prepare() {
- [[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
- epatch "${FILESDIR}"/${PN}-5.8-gfbsd.patch
- epatch "${FILESDIR}"/${PN}-5.7-nongnu.patch
- epatch "${FILESDIR}"/${PN}-5.9-rxvt-unicode-9.15.patch #192083 #383871
- epatch "${FILESDIR}"/${PN}-5.9-fix-clang-build.patch #417763
- epatch "${FILESDIR}"/${PN}-5.9-pkg-config.patch
- epatch "${FILESDIR}"/${P}-no-I-usr-include.patch #522586
- epatch "${FILESDIR}"/${P}-gcc-5.patch #545114
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} -static" \
- BUILD_DIR="${HOSTTIC_DIR}" do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- do_configure narrowc
- use unicode && do_configure widec --enable-widec --includedir="${EPREFIX}"/usr/include/ncursesw
-}
-
-do_configure() {
- ECONF_SOURCE=${S}
-
- mkdir "${BUILD_DIR}"-$1
- cd "${BUILD_DIR}"-$1 || die
- shift
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # ncurses is dumb and doesn't install .pc files unless pkg-config
- # is also installed. Force the tests to go our way. Note that it
- # doesn't actually use pkg-config ... it just looks for set vars.
- --enable-pc-files
- --with-pkg-config="$(tc-getPKG_CONFIG)"
- # This path is used to control where the .pc files are installed.
- PKG_CONFIG_LIBDIR="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(use_with trace)
- $(use_with tinfo termlib)
-
- # The chtype/mmask-t settings below are to retain ABI compat
- # with ncurses-5.4 so dont change em !
- --with-chtype=long
- --with-mmask-t=long
- --disable-ext-colors
- --disable-ext-mouse
- --without-pthread
- --without-reentrant
- )
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- CONFIG_SHELL=/bin/bash econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- make_flags="-C progs tic"
- BUILD_DIR="${HOSTTIC_DIR}" do_compile cross
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- make_flags=""
- multilib_is_native_abi || make_flags="PROGS= "
- do_compile narrowc
- use unicode && do_compile widec
-}
-
-do_compile() {
- cd "${BUILD_DIR}"-$1 || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files
- emake ${make_flags}
-}
-
-multilib_src_install() {
- # use the cross-compiled tic (if need be) #249363
- export PATH="${HOSTTIC_DIR}-cross/progs:${PATH}"
-
- # install unicode version second so that the binaries in /usr/bin
- # support both wide and narrow
- cd "${BUILD_DIR}"-narrowc || die
- emake DESTDIR="${D}" install
- if use unicode ; then
- cd "${BUILD_DIR}"-widec || die
- emake DESTDIR="${D}" install
- fi
-
- # Move libncurses{,w} into /lib
- gen_usr_ldscript -a \
- ncurses \
- $(usex unicode 'ncursesw' '') \
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
- if ! tc-is-static-only ; then
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -a '!' -name '*curses++*.a' -delete
-
- # Build fails to create this ...
- dosym ../share/terminfo /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in ansi console dumb linux rxvt rxvt-unicode screen sun vt{52,100,102,200,220} \
- xterm xterm-color xterm-xfree86
- do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename $(dirname "${termfile}"))
-
- if [[ -n ${termfile} ]] ; then
- dodir /etc/terminfo/${basedir}
- mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
- dosym ../../../../etc/terminfo/${basedir}/${x} \
- /usr/share/terminfo/${basedir}/${x}
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
- doenvd "${T}"/50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}"
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- use doc && dohtml -r doc/html/
-}
diff --git a/sys-libs/ncurses/ncurses-5.9-r99.ebuild b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
deleted file mode 100644
index cc3356f93e0..00000000000
--- a/sys-libs/ncurses/ncurses-5.9-r99.ebuild
+++ /dev/null
@@ -1,20 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# Bridge the old SLOT=5[/5] ebuild to the new SLOT=0/5 since the slotmove
-# functionality does not handle implicit subslots correctly. #558856
-
-EAPI="5"
-
-inherit multilib-build
-
-DESCRIPTION="transitional package"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-
-LICENSE="metapackage"
-SLOT="5/5"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx gpm static-libs tinfo unicode"
-
-DEPEND="sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
-RDEPEND="${DEPEND}"
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
deleted file mode 100644
index d2c8782a6e8..00000000000
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ /dev/null
@@ -1,20 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# Bridge the old SLOT=5[/6] ebuild to the new SLOT=0/6 since the slotmove
-# functionality does not handle implicit subslots correctly. #558856
-
-EAPI="5"
-
-inherit multilib-build
-
-DESCRIPTION="transitional package"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-
-LICENSE="metapackage"
-SLOT="5/6"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx gpm static-libs tinfo unicode"
-
-DEPEND="sys-libs/ncurses:0/6[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
-RDEPEND="${DEPEND}"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2017-01-15 15:28 Benda XU
0 siblings, 0 replies; 213+ messages in thread
From: Benda XU @ 2017-01-15 15:28 UTC (permalink / raw
To: gentoo-commits
commit: e6af40e557dcdf2197139559bbd9c3233d5df6cb
Author: Benda Xu <heroxbd <AT> gentoo <DOT> org>
AuthorDate: Sun Jan 15 15:28:08 2017 +0000
Commit: Benda XU <heroxbd <AT> gentoo <DOT> org>
CommitDate: Sun Jan 15 15:28:22 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e6af40e5
sys-libs/ncurses: CONFIG_SHELL back to EPREFIX/bin/bash
${BASH} (outside prefix) breaks cross-eprefix, having
the resulting ncurses-config with non-prefix shebang.
The original rationale to use ${BASH} was handled by
the bootstrap script.
Reference: https://gitweb.gentoo.org/repo/proj/prefix.git/commit/?id=1307044f212d62
Package-Manager: portage-2.3.3
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index 0fb9c34..ccdd8a5 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2016 Gentoo Foundation
+# Copyright 1999-2017 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
@@ -182,7 +182,7 @@ do_configure() {
# Force bash until upstream rebuilds the configure script with a newer
# version of autotools. #545532
- CONFIG_SHELL=${BASH} \
+ CONFIG_SHELL=${EPREFIX}/bin/bash \
ECONF_SOURCE=${S} \
econf "${conf[@]}" "$@"
}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2016-12-06 5:42 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2016-12-06 5:42 UTC (permalink / raw
To: gentoo-commits
commit: 8e1c1ed684a6dbcd5d89d034d616a915a9a07a1f
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Tue Dec 6 05:41:36 2016 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Tue Dec 6 05:42:24 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8e1c1ed6
sys-libs/ncurses: mark 5.9-r101 stable for all for old SONAME #594338
sys-libs/ncurses/ncurses-5.9-r101.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r101.ebuild b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
index 541bb16..e4304d2 100644
--- a/sys-libs/ncurses/ncurses-5.9-r101.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
@@ -17,7 +17,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="5/5"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="gpm tinfo unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2016-12-04 15:45 Lars Wendler
0 siblings, 0 replies; 213+ messages in thread
From: Lars Wendler @ 2016-12-04 15:45 UTC (permalink / raw
To: gentoo-commits
commit: ccbdd1cfc3f3cfa322d438a90d783e5b9bac763b
Author: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
AuthorDate: Sun Dec 4 15:45:08 2016 +0000
Commit: Lars Wendler <polynomial-c <AT> gentoo <DOT> org>
CommitDate: Sun Dec 4 15:45:28 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ccbdd1cf
sys-libs/ncurses: Stable for amd64 and x86 (bug #594338).
Package-Manager: portage-2.3.2
RepoMan-Options: --include-arches="amd64,x86"
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.0.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index 0141b3b..0fb9c34 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -16,7 +16,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha ~amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index d2c48a4..240e395 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -14,7 +14,7 @@ HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
LICENSE="metapackage"
SLOT="5/6"
-KEYWORDS="alpha ~amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
DEPEND="sys-libs/ncurses:0/6[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2016-11-15 15:40 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2016-11-15 15:40 UTC (permalink / raw
To: gentoo-commits
commit: 9395d4d26fb002a8c4eaa07f20d5456d02771c5a
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Tue Nov 15 15:37:53 2016 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Tue Nov 15 15:39:56 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9395d4d2
sys-libs/ncurses: mark 6.0 & 6.0-r1 arm64/ia64/m68k/ppc/s390/sh/sparc stable #594338
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.0.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index 3dbf170..0141b3b 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -16,7 +16,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha ~amd64 arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha ~amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 9037a01..d2c48a4 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -14,7 +14,7 @@ HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
LICENSE="metapackage"
SLOT="5/6"
-KEYWORDS="alpha ~amd64 arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha ~amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
DEPEND="sys-libs/ncurses:0/6[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2016-11-15 15:40 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2016-11-15 15:40 UTC (permalink / raw
To: gentoo-commits
commit: 9d6fc158826250891ceca12bb9df4a6bbcc66fd2
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Tue Nov 15 15:37:12 2016 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Tue Nov 15 15:39:56 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9d6fc158
sys-libs/ncurses: mark 5.9-r5 & 5.9-r99 m68k/sh stable
sys-libs/ncurses/ncurses-5.9-r5.ebuild | 2 +-
sys-libs/ncurses/ncurses-5.9-r99.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r5.ebuild b/sys-libs/ncurses/ncurses-5.9-r5.ebuild
index 698ed64..319f53f 100644
--- a/sys-libs/ncurses/ncurses-5.9-r5.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r5.ebuild
@@ -16,7 +16,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/5"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm )"
diff --git a/sys-libs/ncurses/ncurses-5.9-r99.ebuild b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
index d8a8266..51b8d44 100644
--- a/sys-libs/ncurses/ncurses-5.9-r99.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
@@ -14,7 +14,7 @@ HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
LICENSE="metapackage"
SLOT="5/5"
-KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
DEPEND="sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2016-10-26 16:35 Markus Meier
0 siblings, 0 replies; 213+ messages in thread
From: Markus Meier @ 2016-10-26 16:35 UTC (permalink / raw
To: gentoo-commits
commit: e1823787e025a9125b1a266c4e633a7a66b33f33
Author: Markus Meier <maekke <AT> gentoo <DOT> org>
AuthorDate: Wed Oct 26 16:34:26 2016 +0000
Commit: Markus Meier <maekke <AT> gentoo <DOT> org>
CommitDate: Wed Oct 26 16:34:26 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e1823787
sys-libs/ncurses: arm stable, bug #594338
Package-Manager: portage-2.3.2
RepoMan-Options: --include-arches="arm"
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 2 +-
sys-libs/ncurses/ncurses-6.0.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index cc94d6e..3dbf170 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -16,7 +16,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha ~amd64 arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index df3329f..9037a01 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -14,7 +14,7 @@ HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
LICENSE="metapackage"
SLOT="5/6"
-KEYWORDS="alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha ~amd64 arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
DEPEND="sys-libs/ncurses:0/6[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2016-10-21 18:13 Tobias Klausmann
0 siblings, 0 replies; 213+ messages in thread
From: Tobias Klausmann @ 2016-10-21 18:13 UTC (permalink / raw
To: gentoo-commits
commit: d384c7a2b99b866460acbf81b274bb4298cdbbe0
Author: Tobias Klausmann <klausman <AT> gentoo <DOT> org>
AuthorDate: Fri Oct 21 18:13:13 2016 +0000
Commit: Tobias Klausmann <klausman <AT> gentoo <DOT> org>
CommitDate: Fri Oct 21 18:13:13 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d384c7a2
sys-libs/ncurses-6.0-r0: stable on alpha
Gentoo-Bug: 594338
sys-libs/ncurses/ncurses-6.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 1ebe5f6..df3329f 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -14,7 +14,7 @@ HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
LICENSE="metapackage"
SLOT="5/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
DEPEND="sys-libs/ncurses:0/6[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2016-10-21 18:11 Tobias Klausmann
0 siblings, 0 replies; 213+ messages in thread
From: Tobias Klausmann @ 2016-10-21 18:11 UTC (permalink / raw
To: gentoo-commits
commit: 573f4f3b128066da2c2d2ccc853ceb0748d8932e
Author: Tobias Klausmann <klausman <AT> gentoo <DOT> org>
AuthorDate: Fri Oct 21 18:11:00 2016 +0000
Commit: Tobias Klausmann <klausman <AT> gentoo <DOT> org>
CommitDate: Fri Oct 21 18:11:08 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=573f4f3b
sys-libs/ncurses-6.0-r1: stable on alpha
Gentoo-Bug: 594338
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index c06476a..cc94d6e 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -16,7 +16,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2016-10-09 7:30 Jeroen Roovers
0 siblings, 0 replies; 213+ messages in thread
From: Jeroen Roovers @ 2016-10-09 7:30 UTC (permalink / raw
To: gentoo-commits
commit: 2fe4937c121bc95d35d111fadbfbe3069383c926
Author: Jeroen Roovers <jer <AT> gentoo <DOT> org>
AuthorDate: Sun Oct 9 07:30:38 2016 +0000
Commit: Jeroen Roovers <jer <AT> gentoo <DOT> org>
CommitDate: Sun Oct 9 07:30:38 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2fe4937c
sys-libs/ncurses: Stable for HPPA PPC64 (bug #594338).
Package-Manager: portage-2.3.1
RepoMan-Options: --ignore-arches
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 4 ++--
sys-libs/ncurses/ncurses-6.0.ebuild | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index 029591b..c06476a 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2015 Gentoo Foundation
+# Copyright 1999-2016 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
@@ -16,7 +16,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 3b85135..1ebe5f6 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2015 Gentoo Foundation
+# Copyright 1999-2016 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
@@ -14,7 +14,7 @@ HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
LICENSE="metapackage"
SLOT="5/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
DEPEND="sys-libs/ncurses:0/6[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2016-02-09 14:54 Fabian Groffen
0 siblings, 0 replies; 213+ messages in thread
From: Fabian Groffen @ 2016-02-09 14:54 UTC (permalink / raw
To: gentoo-commits
commit: 61627f387e1da0279c4e228fee9daa2b059bf142
Author: Fabian Groffen <grobian <AT> gentoo <DOT> org>
AuthorDate: Tue Feb 9 14:53:59 2016 +0000
Commit: Fabian Groffen <grobian <AT> gentoo <DOT> org>
CommitDate: Tue Feb 9 14:54:23 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=61627f38
sys-libs/ncurses: sync Prefix fixes
Package-Manager: portage-2.2.26
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index 47c80c4..029591b 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -74,6 +74,7 @@ src_configure() {
local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
case ${CHOST} in
*-darwin*) dbuildflags= ;;
+ *-aix*) dbuildflags= ;;
esac
echo "int main() {}" | \
$(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
@@ -181,7 +182,7 @@ do_configure() {
# Force bash until upstream rebuilds the configure script with a newer
# version of autotools. #545532
- CONFIG_SHELL=${EPREFIX}/bin/bash \
+ CONFIG_SHELL=${BASH} \
ECONF_SOURCE=${S} \
econf "${conf[@]}" "$@"
}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-12-21 19:01 Michał Górny
0 siblings, 0 replies; 213+ messages in thread
From: Michał Górny @ 2015-12-21 19:01 UTC (permalink / raw
To: gentoo-commits
commit: e4ab6c84892f68c08abffcd5e0904a196d65d1d9
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Mon Dec 21 19:00:41 2015 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Mon Dec 21 19:01:32 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e4ab6c84
sys-libs/ncurses: Fix slot in blocker in 5.9-r4
sys-libs/ncurses/ncurses-5.9-r4.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r4.ebuild b/sys-libs/ncurses/ncurses-5.9-r4.ebuild
index 006c932..78abd87 100644
--- a/sys-libs/ncurses/ncurses-5.9-r4.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r4.ebuild
@@ -21,7 +21,7 @@ DEPEND="gpm? ( sys-libs/gpm )"
# berkdb? ( sys-libs/db )"
# Block the older ncurses that installed all files w/SLOT=5. #557472
RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:0
+ !<=sys-libs/ncurses-5.9-r4:5
!<x11-terms/rxvt-unicode-9.06-r3
abi_x86_32? (
!<=app-emulation/emul-linux-x86-baselibs-20130224-r12
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-12-21 14:49 Patrick Lauer
0 siblings, 0 replies; 213+ messages in thread
From: Patrick Lauer @ 2015-12-21 14:49 UTC (permalink / raw
To: gentoo-commits
commit: d339fa2f0a10225f9d8105d0d91ca19bf7c0b31e
Author: Patrick Lauer <patrick <AT> gentoo <DOT> org>
AuthorDate: Mon Dec 21 14:48:32 2015 +0000
Commit: Patrick Lauer <patrick <AT> gentoo <DOT> org>
CommitDate: Mon Dec 21 14:48:32 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d339fa2f
sys-libs/ncurses: Whitespace
sys-libs/ncurses/ncurses-5.9-r101.ebuild | 1 -
1 file changed, 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r101.ebuild b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
index a90cf85..541bb16 100644
--- a/sys-libs/ncurses/ncurses-5.9-r101.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
@@ -169,7 +169,6 @@ src_compile() {
multilib-minimal_src_compile
}
-
multilib_src_compile() {
local t
for t in "${NCURSES_TARGETS[@]}" ; do
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-11-24 17:31 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-11-24 17:31 UTC (permalink / raw
To: gentoo-commits
commit: 60687094052f6401808b6931746a4201957c2156
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Tue Nov 24 17:30:12 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Tue Nov 24 17:30:12 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=60687094
sys-libs/ncurses: use the same has_version test #566008
The previous commit f5b7039a9bc8c63240340b947c80393e92e21afe added the
:0 slot qualifier to the first has_version test but not to the second.
This breaks when building ncurses-6.0:0 on a system that has SLOT=5
already installed.
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index 9b56138..47c80c4 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -188,7 +188,7 @@ do_configure() {
src_compile() {
# See comments in src_configure.
- if ! ROOT=/ has_version "~sys-libs/${P}" ; then
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
BUILD_DIR="${WORKDIR}" \
do_compile cross -C progs tic
fi
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-10-14 5:40 Benda XU
0 siblings, 0 replies; 213+ messages in thread
From: Benda XU @ 2015-10-14 5:40 UTC (permalink / raw
To: gentoo-commits
commit: a0072d7220178f6b9311e6307d549a04305fdafc
Author: Benda Xu <heroxbd <AT> gentoo <DOT> org>
AuthorDate: Wed Oct 14 05:37:52 2015 +0000
Commit: Benda XU <heroxbd <AT> gentoo <DOT> org>
CommitDate: Wed Oct 14 05:40:25 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a0072d72
sys-libs/ncurses: put headers into ${EPREFIX}/usr/include on Prefix
Bug: 562786
Package-Manager: portage-2.2.22
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index fc20a47..9b56138 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -165,7 +165,12 @@ do_configure() {
conf+=( --without-{pthread,reentrant} )
fi
# Make sure each variant goes in a unique location.
- if [[ ${target} != "ncurses" ]] ; then
+ if [[ ${target} == "ncurses" ]] ; then
+ # "ncurses" variant goes into "${EPREFIX}"/usr/include
+ # It is needed on Prefix because the configure script appends
+ # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
+ conf+=( --enable-overwrite )
+ else
conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
fi
# See comments in src_configure.
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-10-02 12:01 Michał Górny
0 siblings, 0 replies; 213+ messages in thread
From: Michał Górny @ 2015-10-02 12:01 UTC (permalink / raw
To: gentoo-commits
commit: 603fb17ddb81733852b77f2d31140b57310c6918
Author: Stephen L Arnold <nerdboy <AT> gentoo <DOT> org>
AuthorDate: Wed Sep 30 23:07:52 2015 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Fri Oct 2 12:00:34 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=603fb17d
sys-libs/ncurses: fix critical tinfow typo in install command
Add missing continuation mark to complete gen_usr_ldscript command chain
for tinfo and unicode use flags. Otherwise things can get ugly and very
broken...
Package-Manager: portage-2.2.22
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index c41219b..fc20a47 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -227,7 +227,7 @@ multilib_src_install() {
# Move main libraries into /.
if multilib_is_native_abi ; then
gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}"
+ "${NCURSES_TARGETS[@]}" \
$(use tinfo && usex unicode 'tinfow' '') \
$(usev tinfo)
fi
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-31 18:44 Fabian Groffen
0 siblings, 0 replies; 213+ messages in thread
From: Fabian Groffen @ 2015-08-31 18:44 UTC (permalink / raw
To: gentoo-commits
commit: 9c928e3de99c4b2f01f8dfd1b4cc97ae8cd181e5
Author: Fabian Groffen <grobian <AT> gentoo <DOT> org>
AuthorDate: Mon Aug 31 18:36:02 2015 +0000
Commit: Fabian Groffen <grobian <AT> gentoo <DOT> org>
CommitDate: Mon Aug 31 18:43:19 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9c928e3d
sys-libs/ncurses: fix build on platforms that don't support static linking
Package-Manager: portage-2.2.20-prefix
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index 245d977..c41219b 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -68,13 +68,24 @@ src_configure() {
# or installing for the first time. Build a local copy of tic whenever
# the host version isn't available. #249363 #557598
if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
+ local lbuildflags="-static"
+
+ # some toolchains don't quite support static linking
+ local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
+ case ${CHOST} in
+ *-darwin*) dbuildflags= ;;
+ esac
+ echo "int main() {}" | \
+ $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
+ || lbuildflags="${dbuildflags}"
+
# We can't re-use the multilib BUILD_DIR because we run outside of it.
BUILD_DIR="${WORKDIR}" \
CHOST=${CBUILD} \
CFLAGS=${BUILD_CFLAGS} \
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} -static" \
+ LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
multijob_child_init do_configure cross --without-shared --with-normal
fi
multilib-minimal_src_configure
@@ -165,7 +176,7 @@ do_configure() {
# Force bash until upstream rebuilds the configure script with a newer
# version of autotools. #545532
- CONFIG_SHELL=/bin/bash \
+ CONFIG_SHELL=${EPREFIX}/bin/bash \
ECONF_SOURCE=${S} \
econf "${conf[@]}" "$@"
}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-30 1:52 Mike Gilbert
0 siblings, 0 replies; 213+ messages in thread
From: Mike Gilbert @ 2015-08-30 1:52 UTC (permalink / raw
To: gentoo-commits
commit: f5b7039a9bc8c63240340b947c80393e92e21afe
Author: Mike Gilbert <floppym <AT> gentoo <DOT> org>
AuthorDate: Sun Aug 30 01:47:02 2015 +0000
Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org>
CommitDate: Sun Aug 30 01:47:15 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f5b7039a
sys-libs/ncurses: Restrict has_version check to slot 0
Otherwise, we match against sys-libs/ncurses-6.0:5/6, which does not
include the tic command.
Package-Manager: portage-2.2.20
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index 977da6d..245d977 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -67,7 +67,7 @@ src_configure() {
# This comes up when cross-compiling, doing multilib builds, upgrading,
# or installing for the first time. Build a local copy of tic whenever
# the host version isn't available. #249363 #557598
- if ! ROOT=/ has_version "~sys-libs/${P}" ; then
+ if ! ROOT=/ has_version "~sys-libs/${P}:0" ; then
# We can't re-use the multilib BUILD_DIR because we run outside of it.
BUILD_DIR="${WORKDIR}" \
CHOST=${CBUILD} \
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-28 17:39 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-28 17:39 UTC (permalink / raw
To: gentoo-commits
commit: 91e515ab11805360a4d8a69bc5e0dbeba189984d
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Fri Aug 28 17:37:40 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Fri Aug 28 17:38:35 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=91e515ab
sys-libs/ncurses: fix cross tic path test #558622
sys-libs/ncurses/ncurses-5.9-r101.ebuild | 4 ++--
sys-libs/ncurses/ncurses-6.0-r1.ebuild | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r101.ebuild b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
index 00166f6..a90cf85 100644
--- a/sys-libs/ncurses/ncurses-5.9-r101.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
@@ -146,8 +146,8 @@ do_configure() {
fi
# See comments in src_configure.
if [[ ${target} != "cross" ]] ; then
- local tic_path="${WORKDIR}/cross/progs/tic"
- [[ -d ${tic_path} ]] && export TIC_PATH=${tic_path}
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
else
conf+=( --with-progs )
fi
diff --git a/sys-libs/ncurses/ncurses-6.0-r1.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
index a8b1c1e..977da6d 100644
--- a/sys-libs/ncurses/ncurses-6.0-r1.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
@@ -159,8 +159,8 @@ do_configure() {
fi
# See comments in src_configure.
if [[ ${target} != "cross" ]] ; then
- local tic_path="${WORKDIR}/cross/progs/tic"
- [[ -d ${tic_path} ]] && export TIC_PATH=${tic_path}
+ local cross_path="${WORKDIR}/cross"
+ [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
fi
# Force bash until upstream rebuilds the configure script with a newer
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-28 10:53 Jason Zaman
0 siblings, 0 replies; 213+ messages in thread
From: Jason Zaman @ 2015-08-28 10:53 UTC (permalink / raw
To: gentoo-commits
commit: 9de81f6b6990908bfd9883c327371fe7815584c4
Author: Jason Zaman <perfinion <AT> gentoo <DOT> org>
AuthorDate: Fri Aug 28 10:52:53 2015 +0000
Commit: Jason Zaman <perfinion <AT> gentoo <DOT> org>
CommitDate: Fri Aug 28 10:52:53 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9de81f6b
sys-libs/ncurses: add DEPEND to bridge ebuilds as well as RDEP
Package-Manager: portage-2.2.20.1
sys-libs/ncurses/ncurses-5.9-r99.ebuild | 3 ++-
sys-libs/ncurses/ncurses-6.0.ebuild | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r99.ebuild b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
index 49dd18f..d8a8266 100644
--- a/sys-libs/ncurses/ncurses-5.9-r99.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
@@ -17,4 +17,5 @@ SLOT="5/5"
KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
-RDEPEND="sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
+DEPEND="sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
+RDEPEND="${DEPEND}"
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 3a9d218..3b85135 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -17,4 +17,5 @@ SLOT="5/6"
KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
-RDEPEND="sys-libs/ncurses:0/6[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
+DEPEND="sys-libs/ncurses:0/6[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
+RDEPEND="${DEPEND}"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-27 17:03 Jason Zaman
0 siblings, 0 replies; 213+ messages in thread
From: Jason Zaman @ 2015-08-27 17:03 UTC (permalink / raw
To: gentoo-commits
commit: 96470175e0316e0f3402cbce5a83838461e17f75
Author: Jason Zaman <perfinion <AT> gentoo <DOT> org>
AuthorDate: Thu Aug 27 16:59:38 2015 +0000
Commit: Jason Zaman <perfinion <AT> gentoo <DOT> org>
CommitDate: Thu Aug 27 16:59:38 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=96470175
sys-libs/ncurses: add multilib useflags to the bridge 5.9 ebuild
Package-Manager: portage-2.2.20.1
sys-libs/ncurses/ncurses-5.9-r99.ebuild | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r99.ebuild b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
index 95611e9..49dd18f 100644
--- a/sys-libs/ncurses/ncurses-5.9-r99.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
@@ -7,6 +7,8 @@
EAPI="5"
+inherit multilib-build
+
DESCRIPTION="transitional package"
HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
@@ -15,4 +17,4 @@ SLOT="5/5"
KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
-RDEPEND="sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?]"
+RDEPEND="sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-27 17:03 Jason Zaman
0 siblings, 0 replies; 213+ messages in thread
From: Jason Zaman @ 2015-08-27 17:03 UTC (permalink / raw
To: gentoo-commits
commit: 0f20b4ddc60c23a84ae918f31933d8e5f0b7d9eb
Author: Jason Zaman <perfinion <AT> gentoo <DOT> org>
AuthorDate: Thu Aug 27 17:03:10 2015 +0000
Commit: Jason Zaman <perfinion <AT> gentoo <DOT> org>
CommitDate: Thu Aug 27 17:03:10 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0f20b4dd
sys-libs/ncurses: Add bridging ebuild to fix slot move for 5/6 -> 0/6
Gentoo-Bug: https://bugs.gentoo.org/558856
Package-Manager: portage-2.2.20.1
.../{ncurses-6.0.ebuild => ncurses-6.0-r1.ebuild} | 0
sys-libs/ncurses/ncurses-6.0.ebuild | 270 +--------------------
2 files changed, 9 insertions(+), 261 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0-r1.ebuild
similarity index 100%
copy from sys-libs/ncurses/ncurses-6.0.ebuild
copy to sys-libs/ncurses/ncurses-6.0-r1.ebuild
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index a8b1c1e..3a9d218 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -2,271 +2,19 @@
# Distributed under the terms of the GNU General Public License v2
# $Id$
+# Bridge the old SLOT=5[/6] ebuild to the new SLOT=0/6 since the slotmove
+# functionality does not handle implicit subslots correctly. #558856
+
EAPI="5"
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal multiprocessing
+inherit multilib-build
-MY_PV=${PV:0:3}
-PV_SNAP=${PV:4}
-MY_P=${PN}-${MY_PV}
-DESCRIPTION="console display library"
+DESCRIPTION="transitional package"
HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
+LICENSE="metapackage"
+SLOT="5/6"
KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
-
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
- !app-emulation/emul-linux-x86-baselibs"
-
-S=${WORKDIR}/${MY_P}
-
-PATCHES=(
- "${FILESDIR}/${PN}-6.0-gfbsd.patch"
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
-)
-
-src_prepare() {
- [[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
- epatch "${PATCHES[@]}"
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- $(usex unicode 'ncursesw' '')
- $(usex threads 'ncursest' '')
- $(use unicode && usex threads 'ncursestw' '')
- )
-
- multijob_init
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! ROOT=/ has_version "~sys-libs/${P}" ; then
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} -static" \
- multijob_child_init do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
- multijob_finish
-}
-
-multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- multijob_child_init do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}"
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # ncurses is dumb and doesn't install .pc files unless pkg-config
- # is also installed. Force the tests to go our way. Note that it
- # doesn't actually use pkg-config ... it just looks for set vars.
- --enable-pc-files
- --with-pkg-config="$(tc-getPKG_CONFIG)"
- # This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} != "ncurses" ]] ; then
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local tic_path="${WORKDIR}/cross/progs/tic"
- [[ -d ${tic_path} ]] && export TIC_PATH=${tic_path}
- fi
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- CONFIG_SHELL=/bin/bash \
- ECONF_SOURCE=${S} \
- econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! ROOT=/ has_version "~sys-libs/${P}" ; then
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}"
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
- fi
- if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
- ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
- fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -delete
-
- # Build fails to create this ...
- dosym ../share/terminfo /usr/$(get_libdir)/terminfo
-}
-
-multilib_src_install_all() {
-# if ! use berkdb ; then
- # We need the basic terminfo files in /etc, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in ansi console dumb linux rxvt rxvt-unicode screen sun vt{52,100,102,200,220} \
- xterm xterm-color xterm-xfree86
- do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
- local basedir=$(basename $(dirname "${termfile}"))
-
- if [[ -n ${termfile} ]] ; then
- dodir /etc/terminfo/${basedir}
- mv ${termfile} "${ED}"/etc/terminfo/${basedir}/
- dosym ../../../../etc/terminfo/${basedir}/${x} \
- /usr/share/terminfo/${basedir}/${x}
- fi
- done
-# fi
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" > "${T}"/50ncurses
- doenvd "${T}"/50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we keep it
- keepdir /usr/share/terminfo #245374
-
- cd "${S}"
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- use doc && dohtml -r doc/html/
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
+IUSE="ada +cxx gpm static-libs tinfo unicode"
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
+RDEPEND="sys-libs/ncurses:0/6[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,${MULTILIB_USEDEP}]"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-27 11:59 Jason Zaman
0 siblings, 0 replies; 213+ messages in thread
From: Jason Zaman @ 2015-08-27 11:59 UTC (permalink / raw
To: gentoo-commits
commit: 5b9725757eaf3b7ec32ae854151183f222ba4189
Author: Jason Zaman <perfinion <AT> gentoo <DOT> org>
AuthorDate: Thu Aug 27 11:57:59 2015 +0000
Commit: Jason Zaman <perfinion <AT> gentoo <DOT> org>
CommitDate: Thu Aug 27 11:57:59 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5b972575
sys-libs/ncurses: Stabilize the bridging packages for the failed slotmove on all arches
Gentoo-bug: https://bugs.gentoo.org/558856
Package-Manager: portage-2.2.20.1
sys-libs/ncurses/ncurses-5.9-r5.ebuild | 2 +-
sys-libs/ncurses/ncurses-5.9-r99.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r5.ebuild b/sys-libs/ncurses/ncurses-5.9-r5.ebuild
index 3668c97..33f97d4 100644
--- a/sys-libs/ncurses/ncurses-5.9-r5.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r5.ebuild
@@ -16,7 +16,7 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/5"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm )"
diff --git a/sys-libs/ncurses/ncurses-5.9-r99.ebuild b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
index 4b40743..95611e9 100644
--- a/sys-libs/ncurses/ncurses-5.9-r99.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
@@ -12,7 +12,7 @@ HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
LICENSE="metapackage"
SLOT="5/5"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
+KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx gpm static-libs tinfo unicode"
RDEPEND="sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?]"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-27 6:53 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-27 6:53 UTC (permalink / raw
To: gentoo-commits
commit: 125fb7a6cdcde8fb1c7dd59edf87dbf276025ef4
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Thu Aug 27 06:49:36 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Thu Aug 27 06:52:24 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=125fb7a6
sys-libs/ncurses: add dummy package to bridge SLOT move #558856
Since the slotmove operator does not properly update implicit subslots
in generated dependencies in the vdb, add a dummy ebuild to bridge the
old SLOT=5[/5] and the new SLOT=0/5.
.../{ncurses-6.0.ebuild => ncurses-5.9-r5.ebuild} | 185 ++++++++-------------
sys-libs/ncurses/ncurses-5.9-r99.ebuild | 18 ++
sys-libs/ncurses/ncurses-6.0.ebuild | 2 +-
3 files changed, 92 insertions(+), 113 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-5.9-r5.ebuild
similarity index 55%
copy from sys-libs/ncurses/ncurses-6.0.ebuild
copy to sys-libs/ncurses/ncurses-5.9-r5.ebuild
index 145960b..3668c97 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r5.ebuild
@@ -4,7 +4,7 @@
EAPI="5"
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal multiprocessing
+inherit eutils flag-o-matic toolchain-funcs multilib-minimal
MY_PV=${PV:0:3}
PV_SNAP=${PV:4}
@@ -15,33 +15,37 @@ SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
LICENSE="MIT"
# The subslot reflects the SONAME.
-SLOT="0/6"
+SLOT="0/5"
KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs tinfo trace unicode"
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+DEPEND="gpm? ( sys-libs/gpm )"
# berkdb? ( sys-libs/db )"
# Block the older ncurses that installed all files w/SLOT=5. #557472
RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:0
+ !<=sys-libs/ncurses-5.9-r4:5
!<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
- !app-emulation/emul-linux-x86-baselibs"
+ abi_x86_32? (
+ !<=app-emulation/emul-linux-x86-baselibs-20130224-r12
+ !app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)]
+ )"
+# Put the MULTILIB_USEDEP on gpm in PDEPEND only to avoid circular deps.
+# We can move it to DEPEND and drop the --with-gpm=libgpm.so.1 from the econf
+# line below once we can assume multilib gpm is available everywhere.
+PDEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
S=${WORKDIR}/${MY_P}
-
-PATCHES=(
- "${FILESDIR}/${PN}-6.0-gfbsd.patch"
- "${FILESDIR}/${PN}-5.7-nongnu.patch"
- "${FILESDIR}/${PN}-6.0-rxvt-unicode-9.15.patch" #192083 #383871
- "${FILESDIR}/${PN}-6.0-pkg-config.patch"
- "${FILESDIR}/${PN}-5.9-gcc-5.patch" #545114
- "${FILESDIR}/${PN}-6.0-ticlib.patch" #557360
-)
+HOSTTIC_DIR=${WORKDIR}/${P}-host
src_prepare() {
[[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
- epatch "${PATCHES[@]}"
+ epatch "${FILESDIR}"/${PN}-5.8-gfbsd.patch
+ epatch "${FILESDIR}"/${PN}-5.7-nongnu.patch
+ epatch "${FILESDIR}"/${PN}-5.9-rxvt-unicode-9.15.patch #192083 #383871
+ epatch "${FILESDIR}"/${PN}-5.9-fix-clang-build.patch #417763
+ epatch "${FILESDIR}"/${PN}-5.9-pkg-config.patch
+ epatch "${FILESDIR}"/${P}-no-I-usr-include.patch #522586
+ epatch "${FILESDIR}"/${P}-gcc-5.patch #545114
}
src_configure() {
@@ -49,51 +53,31 @@ src_configure() {
tc-export_build_env BUILD_{CC,CPP}
BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
- # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
- # Order matters here -- we want unicode/thread versions to come last so that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- $(usex unicode 'ncursesw' '')
- $(usex threads 'ncursest' '')
- $(use unicode && usex threads 'ncursestw' '')
- )
-
- multijob_init
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. #249363 #557598
- if ! ROOT=/ has_version "~sys-libs/${P}" ; then
- # We can't re-use the multilib BUILD_DIR because we run outside of it.
- BUILD_DIR="${WORKDIR}" \
+ # when cross-compiling, we need to build up our own tic
+ # because people often don't keep matching host/target
+ # ncurses versions #249363
+ if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
CHOST=${CBUILD} \
CFLAGS=${BUILD_CFLAGS} \
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} -static" \
- multijob_child_init do_configure cross --without-shared --with-normal
+ BUILD_DIR="${HOSTTIC_DIR}" do_configure cross --without-shared --with-normal
fi
multilib-minimal_src_configure
- multijob_finish
}
multilib_src_configure() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- multijob_child_init do_configure "${t}"
- done
+ do_configure narrowc
+ use unicode && do_configure widec --enable-widec --includedir="${EPREFIX}"/usr/include/ncursesw
}
do_configure() {
- local target=$1
- shift
+ ECONF_SOURCE=${S}
- mkdir "${BUILD_DIR}/${target}"
- cd "${BUILD_DIR}/${target}" || die
+ mkdir "${BUILD_DIR}"-$1
+ cd "${BUILD_DIR}"-$1 || die
+ shift
local conf=(
# We need the basic terminfo files in /etc, bug #37026. We will
@@ -110,7 +94,7 @@ do_configure() {
--enable-pc-files
--with-pkg-config="$(tc-getPKG_CONFIG)"
# This path is used to control where the .pc files are installed.
- --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+ PKG_CONFIG_LIBDIR="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
# Now the rest of the various standard flags.
--with-shared
@@ -118,7 +102,6 @@ do_configure() {
$(use_with ada)
$(use_with cxx)
$(use_with cxx cxx-binding)
- --with-cxx-shared
$(use_with debug)
$(use_with profile)
# The configure script uses ldd to parse the linked output which
@@ -130,68 +113,51 @@ do_configure() {
--with-manpage-format=normal
--enable-const
--enable-colorfgbg
- --enable-hard-tabs
--enable-echo
$(use_enable !ada warnings)
$(use_with debug assertions)
$(use_enable !debug leaks)
$(use_with debug expanded)
$(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
$(use_with trace)
$(use_with tinfo termlib)
- )
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
- # Make sure each variant goes in a unique location.
- if [[ ${target} != "ncurses" ]] ; then
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local tic_path="${WORKDIR}/cross/progs/tic"
- [[ -d ${tic_path} ]] && export TIC_PATH=${tic_path}
- fi
+ # The chtype/mmask-t settings below are to retain ABI compat
+ # with ncurses-5.4 so dont change em !
+ --with-chtype=long
+ --with-mmask-t=long
+ --disable-ext-colors
+ --disable-ext-mouse
+ --without-pthread
+ --without-reentrant
+ )
# Force bash until upstream rebuilds the configure script with a newer
# version of autotools. #545532
- CONFIG_SHELL=/bin/bash \
- ECONF_SOURCE=${S} \
- econf "${conf[@]}" "$@"
+ CONFIG_SHELL=/bin/bash econf "${conf[@]}" "$@"
}
src_compile() {
- # See comments in src_configure.
- if ! ROOT=/ has_version "~sys-libs/${P}" ; then
- BUILD_DIR="${WORKDIR}" \
- do_compile cross -C progs tic
+ # when cross-compiling, we need to build up our own tic
+ # because people often don't keep matching host/target
+ # ncurses versions #249363
+ if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
+ make_flags="-C progs tic"
+ BUILD_DIR="${HOSTTIC_DIR}" do_compile cross
fi
multilib-minimal_src_compile
}
multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
+ make_flags=""
+ multilib_is_native_abi || make_flags="PROGS= "
+ do_compile narrowc
+ use unicode && do_compile widec
}
do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
+ cd "${BUILD_DIR}"-$1 || die
# A little hack to fix parallel builds ... they break when
# generating sources so if we generate the sources first (in
@@ -204,27 +170,32 @@ do_compile() {
# Manually delete the pc-files file so the install step will
# create the .pc files we want.
rm -f misc/pc-files
- emake "$@"
+ emake ${make_flags}
}
multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}"
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
+ # use the cross-compiled tic (if need be) #249363
+ export PATH="${HOSTTIC_DIR}-cross/progs:${PATH}"
+
+ # install unicode version second so that the binaries in /usr/bin
+ # support both wide and narrow
+ cd "${BUILD_DIR}"-narrowc || die
+ emake DESTDIR="${D}" install
+ if use unicode ; then
+ cd "${BUILD_DIR}"-widec || die
+ emake DESTDIR="${D}" install
fi
+
+ # Move libncurses{,w} into /lib
+ multilib_is_native_abi && gen_usr_ldscript -a \
+ ncurses \
+ $(usex unicode 'ncursesw' '') \
+ $(use tinfo && usex unicode 'tinfow' '') \
+ $(usev tinfo)
if ! tc-is-static-only ; then
- # Provide a link for -lcurses.
ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -delete
+ use static-libs || find "${ED}"/usr/ -name '*.a' -a '!' -name '*curses++*.a' -delete
# Build fails to create this ...
dosym ../share/terminfo /usr/$(get_libdir)/terminfo
@@ -260,13 +231,3 @@ multilib_src_install_all() {
dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
use doc && dohtml -r doc/html/
}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- use unicode && preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-5.9-r99.ebuild b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
new file mode 100644
index 0000000..4b40743
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-5.9-r99.ebuild
@@ -0,0 +1,18 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+# Bridge the old SLOT=5[/5] ebuild to the new SLOT=0/5 since the slotmove
+# functionality does not handle implicit subslots correctly. #558856
+
+EAPI="5"
+
+DESCRIPTION="transitional package"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+
+LICENSE="metapackage"
+SLOT="5/5"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
+IUSE="ada +cxx gpm static-libs tinfo unicode"
+
+RDEPEND="sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?]"
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 145960b..a8b1c1e 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -23,7 +23,7 @@ DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
# berkdb? ( sys-libs/db )"
# Block the older ncurses that installed all files w/SLOT=5. #557472
RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:0
+ !<=sys-libs/ncurses-5.9-r4:5
!<x11-terms/rxvt-unicode-9.06-r3
!<x11-terms/st-0.6-r1
!app-emulation/emul-linux-x86-baselibs"
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-26 18:20 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-26 18:20 UTC (permalink / raw
To: gentoo-commits
commit: 8cc8ae51e676d082f5c785a7463e54773cf96714
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 26 17:41:36 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Wed Aug 26 18:19:51 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8cc8ae51
sys-libs/ncurses: rewrite SLOT=5 ebuild #557472
Delete code that doesn't make sense in an ABI-only ebuild,
and backport changes from the ncurses-6 ebuild.
sys-libs/ncurses/ncurses-5.9-r100.ebuild | 186 ----------------------------
sys-libs/ncurses/ncurses-5.9-r101.ebuild | 203 +++++++++++++++++++++++++++++++
2 files changed, 203 insertions(+), 186 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r100.ebuild b/sys-libs/ncurses/ncurses-5.9-r100.ebuild
deleted file mode 100644
index f37ebf4..0000000
--- a/sys-libs/ncurses/ncurses-5.9-r100.ebuild
+++ /dev/null
@@ -1,186 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI="4"
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal
-
-MY_PV=${PV:0:3}
-PV_SNAP=${PV:4}
-MY_P=${PN}-${MY_PV}
-DESCRIPTION="console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
-SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
-
-LICENSE="MIT"
-SLOT="5"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug gpm profile tinfo trace unicode"
-
-DEPEND="gpm? ( sys-libs/gpm )"
-# berkdb? ( sys-libs/db )"
-# Block the older ncurses that installed all files w/SLOT=5. #557472
-RDEPEND="${DEPEND}
- !<sys-libs/ncurses-6:0
- !<x11-terms/rxvt-unicode-9.06-r3
- abi_x86_32? (
- !<=app-emulation/emul-linux-x86-baselibs-20130224-r12
- !app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)]
- )"
-# Put the MULTILIB_USEDEP on gpm in PDEPEND only to avoid circular deps.
-# We can move it to DEPEND and drop the --with-gpm=libgpm.so.1 from the econf
-# line below once we can assume multilib gpm is available everywhere.
-PDEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-
-S=${WORKDIR}/${MY_P}
-HOSTTIC_DIR=${WORKDIR}/${P}-host
-
-src_prepare() {
- [[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
- epatch "${FILESDIR}"/${PN}-5.8-gfbsd.patch
- epatch "${FILESDIR}"/${PN}-5.7-nongnu.patch
- epatch "${FILESDIR}"/${PN}-5.9-rxvt-unicode-9.15.patch #192083 #383871
- epatch "${FILESDIR}"/${PN}-5.9-fix-clang-build.patch #417763
- epatch "${FILESDIR}"/${PN}-5.9-pkg-config.patch
- epatch "${FILESDIR}"/${P}-no-I-usr-include.patch #522586
- epatch "${FILESDIR}"/${P}-gcc-5.patch #545114
-}
-
-src_configure() {
- unset TERMINFO #115036
- tc-export_build_env BUILD_{CC,CPP}
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
-
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} -static" \
- BUILD_DIR="${HOSTTIC_DIR}" do_configure cross --without-shared --with-normal
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- do_configure narrowc
- use unicode && do_configure widec --enable-widec --includedir="${EPREFIX}"/usr/include/ncursesw
-}
-
-do_configure() {
- ECONF_SOURCE=${S}
-
- mkdir "${BUILD_DIR}"-$1
- cd "${BUILD_DIR}"-$1 || die
- shift
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
- --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Disabled until #245417 is sorted out.
- #$(use_with berkdb hashed-db)
-
- # ncurses is dumb and doesn't install .pc files unless pkg-config
- # is also installed. Force the tests to go our way. Note that it
- # doesn't actually use pkg-config ... it just looks for set vars.
- --enable-pc-files
- --with-pkg-config="$(tc-getPKG_CONFIG)"
- # This path is used to control where the .pc files are installed.
- PKG_CONFIG_LIBDIR="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
- --disable-termcap
- --enable-symlinks
- --with-rcs-ids
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(use_with trace)
- $(use_with tinfo termlib)
-
- # The chtype/mmask-t settings below are to retain ABI compat
- # with ncurses-5.4 so dont change em !
- --with-chtype=long
- --with-mmask-t=long
- --disable-ext-colors
- --disable-ext-mouse
- --without-pthread
- --without-reentrant
- )
-
- # Force bash until upstream rebuilds the configure script with a newer
- # version of autotools. #545532
- CONFIG_SHELL=/bin/bash econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- make_flags="-C progs tic"
- BUILD_DIR="${HOSTTIC_DIR}" do_compile cross
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- make_flags=""
- multilib_is_native_abi || make_flags="PROGS= "
- do_compile narrowc
- use unicode && do_compile widec
-}
-
-do_compile() {
- cd "${BUILD_DIR}"-$1 || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files
- emake ${make_flags}
-}
-
-multilib_src_install() {
- local lib
- cd "${BUILD_DIR}"-narrowc/lib || die
- for lib in *5.9; do
- newlib.so ${lib} ${lib%%.9}
- done
- if use unicode ; then
- cd "${BUILD_DIR}"-widec/lib || die
- for lib in *5.9; do
- newlib.so ${lib} ${lib%%.9}
- done
- fi
-}
diff --git a/sys-libs/ncurses/ncurses-5.9-r101.ebuild b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
new file mode 100644
index 0000000..00166f6
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-5.9-r101.ebuild
@@ -0,0 +1,203 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+# This version is just for the ABI .5 library
+
+EAPI="5"
+
+inherit eutils toolchain-funcs multilib-minimal multiprocessing
+
+MY_PV=${PV:0:3}
+MY_P=${PN}-${MY_PV}
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+LICENSE="MIT"
+# The subslot reflects the SONAME.
+SLOT="5/5"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+IUSE="gpm tinfo unicode"
+
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+# Block the ncurses-5 that installs the same lib. #557472
+RDEPEND="${DEPEND}
+ !<sys-libs/ncurses-6:0"
+
+S=${WORKDIR}/${MY_P}
+
+PATCHES=(
+ "${FILESDIR}"/${PN}-5.8-gfbsd.patch
+ "${FILESDIR}"/${PN}-5.7-nongnu.patch
+ "${FILESDIR}"/${PN}-5.9-rxvt-unicode-9.15.patch #192083 #383871
+ "${FILESDIR}"/${PN}-5.9-fix-clang-build.patch #417763
+ "${FILESDIR}"/${PN}-5.9-pkg-config.patch
+ "${FILESDIR}"/${P}-no-I-usr-include.patch #522586
+ "${FILESDIR}"/${P}-gcc-5.patch #545114
+)
+
+src_prepare() {
+ epatch "${PATCHES[@]}"
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ $(usex unicode 'ncursesw' '')
+ )
+
+ multijob_init
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! ROOT=/ has_version "~sys-libs/${P}" ; then
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} -static" \
+ multijob_child_init do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+ multijob_finish
+}
+
+multilib_src_configure() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ multijob_child_init do_configure "${t}"
+ done
+}
+
+do_configure() {
+ local target=$1
+ shift
+
+ mkdir "${BUILD_DIR}/${target}"
+ cd "${BUILD_DIR}/${target}" || die
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Now the rest of the various standard flags.
+ --without-hashed-db
+ --disable-pc-files
+ --with-shared
+ --without-hashed-db
+ --without-ada
+ --without-cxx
+ --without-cxx-binding
+ --without-debug
+ --without-profile
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-echo
+ --disable-warnings
+ --without-assertions
+ --enable-leaks
+ --without-expanded
+ --with-macros
+ --without-progs
+ --without-tests
+ --without-trace
+ $(use_with tinfo termlib)
+
+ # The chtype/mmask-t settings below are to retain ABI compat
+ # with ncurses-5.4 so dont change em !
+ --with-chtype=long
+ --with-mmask-t=long
+ --disable-ext-colors
+ --disable-ext-mouse
+ --without-{pthread,reentrant}
+ )
+
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} != "ncurses" ]] ; then
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local tic_path="${WORKDIR}/cross/progs/tic"
+ [[ -d ${tic_path} ]] && export TIC_PATH=${tic_path}
+ else
+ conf+=( --with-progs )
+ fi
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ CONFIG_SHELL=/bin/bash \
+ ECONF_SOURCE=${S} \
+ econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # See comments in src_configure.
+ if ! ROOT=/ has_version "~sys-libs/${P}" ; then
+ BUILD_DIR="${WORKDIR}" \
+ do_compile cross -C progs tic
+ fi
+
+ multilib-minimal_src_compile
+}
+
+
+multilib_src_compile() {
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
+}
+
+do_compile() {
+ local target=$1
+ shift
+
+ cd "${BUILD_DIR}/${target}" || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ emake "$@"
+}
+
+multilib_src_install() {
+ local target lib
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ cd "${BUILD_DIR}/${target}/lib" || die
+ for lib in *5.9 ; do
+ newlib.so "${lib}" "${lib%%.9}"
+ done
+ done
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-26 12:28 Justin Lecher
0 siblings, 0 replies; 213+ messages in thread
From: Justin Lecher @ 2015-08-26 12:28 UTC (permalink / raw
To: gentoo-commits
commit: bc763694f07e96137c03ff88643c4535ea645250
Author: Justin Lecher <jlec <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 26 12:23:59 2015 +0000
Commit: Justin Lecher <jlec <AT> gentoo <DOT> org>
CommitDate: Wed Aug 26 12:23:59 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=bc763694
sys-libs/ncurses: Fix blocker
Package-Manager: portage-2.2.20.1
Signed-off-by: Justin Lecher <jlec <AT> gentoo.org>
sys-libs/ncurses/ncurses-5.9-r100.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r100.ebuild b/sys-libs/ncurses/ncurses-5.9-r100.ebuild
index 40db661..f37ebf4 100644
--- a/sys-libs/ncurses/ncurses-5.9-r100.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r100.ebuild
@@ -21,7 +21,7 @@ DEPEND="gpm? ( sys-libs/gpm )"
# berkdb? ( sys-libs/db )"
# Block the older ncurses that installed all files w/SLOT=5. #557472
RDEPEND="${DEPEND}
- !<=sys-libs/ncurses-6:0
+ !<sys-libs/ncurses-6:0
!<x11-terms/rxvt-unicode-9.06-r3
abi_x86_32? (
!<=app-emulation/emul-linux-x86-baselibs-20130224-r12
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-26 12:19 Justin Lecher
0 siblings, 0 replies; 213+ messages in thread
From: Justin Lecher @ 2015-08-26 12:19 UTC (permalink / raw
To: gentoo-commits
commit: ec1cb36e722e62cf504f89ffdfc05ce87407ae3d
Author: Justin Lecher <jlec <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 26 12:19:10 2015 +0000
Commit: Justin Lecher <jlec <AT> gentoo <DOT> org>
CommitDate: Wed Aug 26 12:19:20 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ec1cb36e
sys-libs/ncurses: Add compatibility package for binary packages
Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=557472
Package-Manager: portage-2.2.20.1
Signed-off-by: Justin Lecher <jlec <AT> gentoo.org>
sys-libs/ncurses/metadata.xml | 12 +-
sys-libs/ncurses/ncurses-5.9-r100.ebuild | 186 +++++++++++++++++++++++++++++++
2 files changed, 192 insertions(+), 6 deletions(-)
diff --git a/sys-libs/ncurses/metadata.xml b/sys-libs/ncurses/metadata.xml
index 7856364..e136782 100644
--- a/sys-libs/ncurses/metadata.xml
+++ b/sys-libs/ncurses/metadata.xml
@@ -1,14 +1,14 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
<pkgmetadata>
-<herd>base-system</herd>
-<use>
- <flag name='ada'>Add bindings for the ADA programming language</flag>
- <flag name='tinfo'>
+ <herd>base-system</herd>
+ <use>
+ <flag name="ada">Add bindings for the ADA programming language</flag>
+ <flag name="tinfo">
Build curses library (libncurses) sep from the low-level terminfo
library (libtinfo) -- usually needed only for binary packages -- but
it is binary compatible in either mode
</flag>
- <flag name='trace'>Enable test trace() support in ncurses calls</flag>
-</use>
+ <flag name="trace">Enable test trace() support in ncurses calls</flag>
+ </use>
</pkgmetadata>
diff --git a/sys-libs/ncurses/ncurses-5.9-r100.ebuild b/sys-libs/ncurses/ncurses-5.9-r100.ebuild
new file mode 100644
index 0000000..40db661
--- /dev/null
+++ b/sys-libs/ncurses/ncurses-5.9-r100.ebuild
@@ -0,0 +1,186 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI="4"
+inherit eutils flag-o-matic toolchain-funcs multilib-minimal
+
+MY_PV=${PV:0:3}
+PV_SNAP=${PV:4}
+MY_P=${PN}-${MY_PV}
+DESCRIPTION="console display library"
+HOMEPAGE="https://www.gnu.org/software/ncurses/ http://dickey.his.com/ncurses/"
+SRC_URI="mirror://gnu/ncurses/${MY_P}.tar.gz"
+
+LICENSE="MIT"
+SLOT="5"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
+IUSE="ada +cxx debug gpm profile tinfo trace unicode"
+
+DEPEND="gpm? ( sys-libs/gpm )"
+# berkdb? ( sys-libs/db )"
+# Block the older ncurses that installed all files w/SLOT=5. #557472
+RDEPEND="${DEPEND}
+ !<=sys-libs/ncurses-6:0
+ !<x11-terms/rxvt-unicode-9.06-r3
+ abi_x86_32? (
+ !<=app-emulation/emul-linux-x86-baselibs-20130224-r12
+ !app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)]
+ )"
+# Put the MULTILIB_USEDEP on gpm in PDEPEND only to avoid circular deps.
+# We can move it to DEPEND and drop the --with-gpm=libgpm.so.1 from the econf
+# line below once we can assume multilib gpm is available everywhere.
+PDEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+
+S=${WORKDIR}/${MY_P}
+HOSTTIC_DIR=${WORKDIR}/${P}-host
+
+src_prepare() {
+ [[ -n ${PV_SNAP} ]] && epatch "${WORKDIR}"/${MY_P}-${PV_SNAP}-patch.sh
+ epatch "${FILESDIR}"/${PN}-5.8-gfbsd.patch
+ epatch "${FILESDIR}"/${PN}-5.7-nongnu.patch
+ epatch "${FILESDIR}"/${PN}-5.9-rxvt-unicode-9.15.patch #192083 #383871
+ epatch "${FILESDIR}"/${PN}-5.9-fix-clang-build.patch #417763
+ epatch "${FILESDIR}"/${PN}-5.9-pkg-config.patch
+ epatch "${FILESDIR}"/${P}-no-I-usr-include.patch #522586
+ epatch "${FILESDIR}"/${P}-gcc-5.patch #545114
+}
+
+src_configure() {
+ unset TERMINFO #115036
+ tc-export_build_env BUILD_{CC,CPP}
+ BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+
+ # when cross-compiling, we need to build up our own tic
+ # because people often don't keep matching host/target
+ # ncurses versions #249363
+ if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
+ CHOST=${CBUILD} \
+ CFLAGS=${BUILD_CFLAGS} \
+ CXXFLAGS=${BUILD_CXXFLAGS} \
+ CPPFLAGS=${BUILD_CPPFLAGS} \
+ LDFLAGS="${BUILD_LDFLAGS} -static" \
+ BUILD_DIR="${HOSTTIC_DIR}" do_configure cross --without-shared --with-normal
+ fi
+ multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+ do_configure narrowc
+ use unicode && do_configure widec --enable-widec --includedir="${EPREFIX}"/usr/include/ncursesw
+}
+
+do_configure() {
+ ECONF_SOURCE=${S}
+
+ mkdir "${BUILD_DIR}"-$1
+ cd "${BUILD_DIR}"-$1 || die
+ shift
+
+ local conf=(
+ # We need the basic terminfo files in /etc, bug #37026. We will
+ # add '--with-terminfo-dirs' and then populate /etc/terminfo in
+ # src_install() ...
+ --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
+
+ # Disabled until #245417 is sorted out.
+ #$(use_with berkdb hashed-db)
+
+ # ncurses is dumb and doesn't install .pc files unless pkg-config
+ # is also installed. Force the tests to go our way. Note that it
+ # doesn't actually use pkg-config ... it just looks for set vars.
+ --enable-pc-files
+ --with-pkg-config="$(tc-getPKG_CONFIG)"
+ # This path is used to control where the .pc files are installed.
+ PKG_CONFIG_LIBDIR="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
+
+ # Now the rest of the various standard flags.
+ --with-shared
+ --without-hashed-db
+ $(use_with ada)
+ $(use_with cxx)
+ $(use_with cxx cxx-binding)
+ $(use_with debug)
+ $(use_with profile)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
+ --disable-termcap
+ --enable-symlinks
+ --with-rcs-ids
+ --with-manpage-format=normal
+ --enable-const
+ --enable-colorfgbg
+ --enable-echo
+ $(use_enable !ada warnings)
+ $(use_with debug assertions)
+ $(use_enable !debug leaks)
+ $(use_with debug expanded)
+ $(use_with !debug macros)
+ $(use_with trace)
+ $(use_with tinfo termlib)
+
+ # The chtype/mmask-t settings below are to retain ABI compat
+ # with ncurses-5.4 so dont change em !
+ --with-chtype=long
+ --with-mmask-t=long
+ --disable-ext-colors
+ --disable-ext-mouse
+ --without-pthread
+ --without-reentrant
+ )
+
+ # Force bash until upstream rebuilds the configure script with a newer
+ # version of autotools. #545532
+ CONFIG_SHELL=/bin/bash econf "${conf[@]}" "$@"
+}
+
+src_compile() {
+ # when cross-compiling, we need to build up our own tic
+ # because people often don't keep matching host/target
+ # ncurses versions #249363
+ if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
+ make_flags="-C progs tic"
+ BUILD_DIR="${HOSTTIC_DIR}" do_compile cross
+ fi
+
+ multilib-minimal_src_compile
+}
+
+multilib_src_compile() {
+ make_flags=""
+ multilib_is_native_abi || make_flags="PROGS= "
+ do_compile narrowc
+ use unicode && do_compile widec
+}
+
+do_compile() {
+ cd "${BUILD_DIR}"-$1 || die
+
+ # A little hack to fix parallel builds ... they break when
+ # generating sources so if we generate the sources first (in
+ # non-parallel), we can then build the rest of the package
+ # in parallel. This is not really a perf hit since the source
+ # generation is quite small.
+ emake -j1 sources
+ # For some reason, sources depends on pc-files which depends on
+ # compiled libraries which depends on sources which ...
+ # Manually delete the pc-files file so the install step will
+ # create the .pc files we want.
+ rm -f misc/pc-files
+ emake ${make_flags}
+}
+
+multilib_src_install() {
+ local lib
+ cd "${BUILD_DIR}"-narrowc/lib || die
+ for lib in *5.9; do
+ newlib.so ${lib} ${lib%%.9}
+ done
+ if use unicode ; then
+ cd "${BUILD_DIR}"-widec/lib || die
+ for lib in *5.9; do
+ newlib.so ${lib} ${lib%%.9}
+ done
+ fi
+}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-17 13:52 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-17 13:52 UTC (permalink / raw
To: gentoo-commits
commit: badf9b730721ec3c0781588cb7614721db3a045a
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Mon Aug 17 13:41:54 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Mon Aug 17 13:50:49 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=badf9b73
sys-libs/ncurses: rework handling of build-time tic #557834
There are more cases where a version of tic is needed that matches the
current version of source beyond cross-compiling. New installs, multilib,
and upgrades also run into this case. Drop the cross-compile test and run
the code whenever the host version isn't in sync.
sys-libs/ncurses/ncurses-6.0.ebuild | 33 +++++++++++++++++++--------------
1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 81c87de..39ebaaf 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -60,27 +60,31 @@ src_configure() {
$(use unicode && usex threads 'ncursestw' '')
)
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
+ multijob_init
+
+ # When installing ncurses, we have to use a compatible version of tic.
+ # This comes up when cross-compiling, doing multilib builds, upgrading,
+ # or installing for the first time. Build a local copy of tic whenever
+ # the host version isn't available. #249363 #557598
+ if ! ROOT=/ has_version "~sys-libs/${P}" ; then
+ # We can't re-use the multilib BUILD_DIR because we run outside of it.
+ BUILD_DIR="${WORKDIR}" \
CHOST=${CBUILD} \
CFLAGS=${BUILD_CFLAGS} \
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} -static" \
- do_configure cross --without-shared --with-normal
+ multijob_child_init do_configure cross --without-shared --with-normal
fi
multilib-minimal_src_configure
+ multijob_finish
}
multilib_src_configure() {
local t
- multijob_init
for t in "${NCURSES_TARGETS[@]}" ; do
multijob_child_init do_configure "${t}"
done
- multijob_finish
}
do_configure() {
@@ -152,6 +156,11 @@ do_configure() {
if [[ ${target} != "ncurses" ]] ; then
conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
fi
+ # See comments in src_configure.
+ if [[ ${target} != "cross" ]] ; then
+ local tic_path="${WORKDIR}/cross/progs/tic"
+ [[ -d ${tic_path} ]] && export TIC_PATH=${tic_path}
+ fi
# Force bash until upstream rebuilds the configure script with a newer
# version of autotools. #545532
@@ -161,10 +170,9 @@ do_configure() {
}
src_compile() {
- # when cross-compiling, we need to build up our own tic
- # because people often don't keep matching host/target
- # ncurses versions #249363
- if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
+ # See comments in src_configure.
+ if ! ROOT=/ has_version "~sys-libs/${P}" ; then
+ BUILD_DIR="${WORKDIR}" \
do_compile cross -C progs tic
fi
@@ -199,9 +207,6 @@ do_compile() {
}
multilib_src_install() {
- # use the cross-compiled tic (if need be) #249363
- export PATH="${BUILD_DIR}/cross/progs:${PATH}"
-
local target
for target in "${NCURSES_TARGETS[@]}" ; do
emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-17 13:52 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-17 13:52 UTC (permalink / raw
To: gentoo-commits
commit: ed09185ff04818538e98f5b9e58b5a8ad6eec2ad
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Mon Aug 17 13:39:39 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Mon Aug 17 13:41:40 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ed09185f
sys-libs/ncurses: block older x11-terms/st #557454
sys-libs/ncurses/ncurses-6.0.ebuild | 1 +
1 file changed, 1 insertion(+)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 898956c..81c87de 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -24,6 +24,7 @@ DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
# berkdb? ( sys-libs/db )"
RDEPEND="${DEPEND}
!<x11-terms/rxvt-unicode-9.06-r3
+ !<x11-terms/st-0.6-r1
!app-emulation/emul-linux-x86-baselibs"
S=${WORKDIR}/${MY_P}
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-12 10:38 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-12 10:38 UTC (permalink / raw
To: gentoo-commits
commit: 5afe80ab951f4c7bf76ca48f4432dcbcec1f791f
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 12 10:34:08 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Wed Aug 12 10:38:11 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5afe80ab
sys-libs/ncurses: rework use of BUILD_DIR
Rather than maintain parallel dirs, create subdirs of the main BUILD_DIR.
This makes the overall flow a bit simpler as we can also stick the cross
logic in there too.
sys-libs/ncurses/ncurses-6.0.ebuild | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 0a44ca6..b0bd0f9 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -27,7 +27,6 @@ RDEPEND="${DEPEND}
!app-emulation/emul-linux-x86-baselibs"
S=${WORKDIR}/${MY_P}
-HOSTTIC_DIR=${WORKDIR}/${P}-host
PATCHES=(
"${FILESDIR}/${PN}-6.0-gfbsd.patch"
@@ -56,7 +55,7 @@ src_configure() {
CXXFLAGS=${BUILD_CXXFLAGS} \
CPPFLAGS=${BUILD_CPPFLAGS} \
LDFLAGS="${BUILD_LDFLAGS} -static" \
- BUILD_DIR="${HOSTTIC_DIR}" do_configure cross --without-shared --with-normal
+ do_configure cross --without-shared --with-normal
fi
multilib-minimal_src_configure
}
@@ -71,10 +70,12 @@ multilib_src_configure() {
do_configure() {
ECONF_SOURCE=${S}
- mkdir "${BUILD_DIR}"-$1
- cd "${BUILD_DIR}"-$1 || die
+ local target=$1
shift
+ mkdir "${BUILD_DIR}/${target}"
+ cd "${BUILD_DIR}/${target}" || die
+
local conf=(
# We need the basic terminfo files in /etc, bug #37026. We will
# add '--with-terminfo-dirs' and then populate /etc/terminfo in
@@ -133,7 +134,7 @@ src_compile() {
# because people often don't keep matching host/target
# ncurses versions #249363
if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- BUILD_DIR="${HOSTTIC_DIR}" do_compile cross -C progs tic
+ do_compile cross -C progs tic
fi
multilib-minimal_src_compile
@@ -145,9 +146,11 @@ multilib_src_compile() {
}
do_compile() {
- cd "${BUILD_DIR}"-$1 || die
+ local target=$1
shift
+ cd "${BUILD_DIR}/${target}" || die
+
# A little hack to fix parallel builds ... they break when
# generating sources so if we generate the sources first (in
# non-parallel), we can then build the rest of the package
@@ -164,14 +167,14 @@ do_compile() {
multilib_src_install() {
# use the cross-compiled tic (if need be) #249363
- export PATH="${HOSTTIC_DIR}-cross/progs:${PATH}"
+ export PATH="${BUILD_DIR}/cross/progs:${PATH}"
# install unicode version second so that the binaries in /usr/bin
# support both wide and narrow
- cd "${BUILD_DIR}"-narrowc || die
+ cd "${BUILD_DIR}"/narrowc || die
emake DESTDIR="${D}" install
if use unicode ; then
- cd "${BUILD_DIR}"-widec || die
+ cd "${BUILD_DIR}"/widec || die
emake DESTDIR="${D}" install
fi
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-12 10:38 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-12 10:38 UTC (permalink / raw
To: gentoo-commits
commit: 29a9b9b90f986edfdbea997315d7bb34762e32a1
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 12 10:23:40 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Wed Aug 12 10:38:09 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=29a9b9b9
sys-libs/ncurses: avoid building tests when unused
If the user isn't going to run the testsuite, there's no point in building
all the test binaries, so put that logic behind the standard USE=test.
sys-libs/ncurses/ncurses-6.0.ebuild | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 7372e09..8a055bf 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -18,7 +18,7 @@ LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="5/6"
KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs tinfo trace unicode"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
# berkdb? ( sys-libs/db )"
@@ -115,6 +115,7 @@ do_configure() {
$(use_enable !debug leaks)
$(use_with debug expanded)
$(use_with !debug macros)
+ $(use_with test tests)
$(use_with trace)
$(use_with tinfo termlib)
)
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-12 10:38 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-12 10:38 UTC (permalink / raw
To: gentoo-commits
commit: 1c3e65403d006ea25f98e6405486fa1201e9d173
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 12 10:27:00 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Wed Aug 12 10:38:10 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1c3e6540
sys-libs/ncurses: rework disabling of progs
Since the configure script has an option to disable progs, leverage that
instead of whiting out a random make variable. It's the same result, but
feels cleaner and requires less code.
sys-libs/ncurses/ncurses-6.0.ebuild | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 8a055bf..08d4b73 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -115,6 +115,7 @@ do_configure() {
$(use_enable !debug leaks)
$(use_with debug expanded)
$(use_with !debug macros)
+ $(multilib_native_with progs)
$(use_with test tests)
$(use_with trace)
$(use_with tinfo termlib)
@@ -130,22 +131,20 @@ src_compile() {
# because people often don't keep matching host/target
# ncurses versions #249363
if tc-is-cross-compiler && ! ROOT=/ has_version ~sys-libs/${P} ; then
- make_flags="-C progs tic"
- BUILD_DIR="${HOSTTIC_DIR}" do_compile cross
+ BUILD_DIR="${HOSTTIC_DIR}" do_compile cross -C progs tic
fi
multilib-minimal_src_compile
}
multilib_src_compile() {
- make_flags=""
- multilib_is_native_abi || make_flags="PROGS= "
do_compile narrowc
use unicode && do_compile widec
}
do_compile() {
cd "${BUILD_DIR}"-$1 || die
+ shift
# A little hack to fix parallel builds ... they break when
# generating sources so if we generate the sources first (in
@@ -158,7 +157,7 @@ do_compile() {
# Manually delete the pc-files file so the install step will
# create the .pc files we want.
rm -f misc/pc-files
- emake ${make_flags}
+ emake "$@"
}
multilib_src_install() {
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-12 10:38 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-12 10:38 UTC (permalink / raw
To: gentoo-commits
commit: f812f0eafe80c5dc524b300f41c7d32b35e8f6f1
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 12 10:36:55 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Wed Aug 12 10:38:12 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f812f0ea
sys-libs/ncurses: add USE=threads support #510440
Now that we support the new ABI 6, we can support installing the threaded
versions of ncurses alongside the non-threaded.
sys-libs/ncurses/ncurses-6.0.ebuild | 73 ++++++++++++++++++++++++++-----------
1 file changed, 51 insertions(+), 22 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index b0bd0f9..a73d58f 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -18,7 +18,7 @@ LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="5/6"
KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="ada +cxx debug doc gpm minimal profile static-libs test tinfo trace unicode"
+IUSE="ada +cxx debug doc gpm minimal profile static-libs test threads tinfo trace unicode"
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
# berkdb? ( sys-libs/db )"
@@ -46,6 +46,18 @@ src_configure() {
tc-export_build_env BUILD_{CC,CPP}
BUILD_CPPFLAGS+=" -D_GNU_SOURCE" #214642
+ # Build the various variants of ncurses -- narrow, wide, and threaded. #510440
+ # Order matters here -- we want unicode/thread versions to come last so that the
+ # binaries in /usr/bin support both wide and narrow.
+ # The naming is also important as we use these directly with filenames and when
+ # checking configure flags.
+ NCURSES_TARGETS=(
+ ncurses
+ $(usex unicode 'ncursesw' '')
+ $(usex threads 'ncursest' '')
+ $(use unicode && usex threads 'ncursestw' '')
+ )
+
# when cross-compiling, we need to build up our own tic
# because people often don't keep matching host/target
# ncurses versions #249363
@@ -61,15 +73,15 @@ src_configure() {
}
multilib_src_configure() {
+ local t
multijob_init
- multijob_child_init do_configure narrowc
- use unicode && multijob_child_init do_configure widec --enable-widec --includedir="${EPREFIX}"/usr/include/ncursesw
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ multijob_child_init do_configure "${t}"
+ done
multijob_finish
}
do_configure() {
- ECONF_SOURCE=${S}
-
local target=$1
shift
@@ -124,9 +136,26 @@ do_configure() {
$(use_with tinfo termlib)
)
+ if [[ ${target} == ncurses*w ]] ; then
+ conf+=( --enable-widec )
+ else
+ conf+=( --disable-widec )
+ fi
+ if [[ ${target} == ncursest* ]] ; then
+ conf+=( --with-{pthread,reentrant} )
+ else
+ conf+=( --without-{pthread,reentrant} )
+ fi
+ # Make sure each variant goes in a unique location.
+ if [[ ${target} != "ncurses" ]] ; then
+ conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
+ fi
+
# Force bash until upstream rebuilds the configure script with a newer
# version of autotools. #545532
- CONFIG_SHELL=/bin/bash econf "${conf[@]}" "$@"
+ CONFIG_SHELL=/bin/bash \
+ ECONF_SOURCE=${S} \
+ econf "${conf[@]}" "$@"
}
src_compile() {
@@ -141,8 +170,10 @@ src_compile() {
}
multilib_src_compile() {
- do_compile narrowc
- use unicode && do_compile widec
+ local t
+ for t in "${NCURSES_TARGETS[@]}" ; do
+ do_compile "${t}"
+ done
}
do_compile() {
@@ -169,22 +200,20 @@ multilib_src_install() {
# use the cross-compiled tic (if need be) #249363
export PATH="${BUILD_DIR}/cross/progs:${PATH}"
- # install unicode version second so that the binaries in /usr/bin
- # support both wide and narrow
- cd "${BUILD_DIR}"/narrowc || die
- emake DESTDIR="${D}" install
- if use unicode ; then
- cd "${BUILD_DIR}"/widec || die
- emake DESTDIR="${D}" install
+ local target
+ for target in "${NCURSES_TARGETS[@]}" ; do
+ emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
+ done
+
+ # Move main libraries into /.
+ if multilib_is_native_abi ; then
+ gen_usr_ldscript -a \
+ "${NCURSES_TARGETS[@]}"
+ $(use tinfo && usex unicode 'tinfow' '') \
+ $(usev tinfo)
fi
-
- # Move libncurses{,w} into /lib
- multilib_is_native_abi && gen_usr_ldscript -a \
- ncurses \
- $(usex unicode 'ncursesw' '') \
- $(use tinfo && usex unicode 'tinfow' '') \
- $(usev tinfo)
if ! tc-is-static-only ; then
+ # Provide a link for -lcurses.
ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
fi
use static-libs || find "${ED}"/usr/ -name '*.a' -delete
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-12 10:38 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-12 10:38 UTC (permalink / raw
To: gentoo-commits
commit: 0671fd8b94d3ee9eb164bae47d2ad0871d5632ae
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 12 10:29:26 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Wed Aug 12 10:38:11 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0671fd8b
sys-libs/ncurses: run configure steps in parallel
This gives us a nice speed boost as the configure script is quite large.
Follow up changes will make this more apparent (when we run configure up
to 4 times instead of just 2).
sys-libs/ncurses/ncurses-6.0.ebuild | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 08d4b73..0a44ca6 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -4,7 +4,7 @@
EAPI="5"
-inherit eutils flag-o-matic toolchain-funcs multilib-minimal
+inherit eutils flag-o-matic toolchain-funcs multilib-minimal multiprocessing
MY_PV=${PV:0:3}
PV_SNAP=${PV:4}
@@ -62,8 +62,10 @@ src_configure() {
}
multilib_src_configure() {
- do_configure narrowc
- use unicode && do_configure widec --enable-widec --includedir="${EPREFIX}"/usr/include/ncursesw
+ multijob_init
+ multijob_child_init do_configure narrowc
+ use unicode && multijob_child_init do_configure widec --enable-widec --includedir="${EPREFIX}"/usr/include/ncursesw
+ multijob_finish
}
do_configure() {
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-12 10:38 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-12 10:38 UTC (permalink / raw
To: gentoo-commits
commit: d76590f6efb6a7fd7c5465886be12b03c688c944
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 12 10:22:17 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Wed Aug 12 10:38:08 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d76590f6
sys-libs/ncurses: build the C++ libs as shared
Since upstream has a configure flag for this now, we should be able to
build+install the C++ layers as shared libs instead of only making the
static libs available.
sys-libs/ncurses/ncurses-6.0.ebuild | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 92adb1e..7372e09 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -96,6 +96,7 @@ do_configure() {
$(use_with ada)
$(use_with cxx)
$(use_with cxx cxx-binding)
+ --with-cxx-shared
$(use_with debug)
$(use_with profile)
# The configure script uses ldd to parse the linked output which
@@ -181,7 +182,7 @@ multilib_src_install() {
if ! tc-is-static-only ; then
ln -sf libncurses$(get_libname) "${ED}"/usr/$(get_libdir)/libcurses$(get_libname) || die
fi
- use static-libs || find "${ED}"/usr/ -name '*.a' -a '!' -name '*curses++*.a' -delete
+ use static-libs || find "${ED}"/usr/ -name '*.a' -delete
# Build fails to create this ...
dosym ../share/terminfo /usr/$(get_libdir)/terminfo
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-12 10:38 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-12 10:38 UTC (permalink / raw
To: gentoo-commits
commit: c44913450f0e5957fe2bd51ead50570031e00cb8
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 12 10:20:13 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Wed Aug 12 10:38:07 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c4491345
sys-libs/ncurses: simplify the multilib dep logic
Block the emul package all the time now that it's no longer in the tree.
Unify the gpm deps since there's already a circular dep here and the
multilib code makes no real difference in that respect.
sys-libs/ncurses/ncurses-6.0.ebuild | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.0.ebuild b/sys-libs/ncurses/ncurses-6.0.ebuild
index 476481d..92adb1e 100644
--- a/sys-libs/ncurses/ncurses-6.0.ebuild
+++ b/sys-libs/ncurses/ncurses-6.0.ebuild
@@ -20,18 +20,11 @@ SLOT="5/6"
KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
IUSE="ada +cxx debug doc gpm minimal profile static-libs tinfo trace unicode"
-DEPEND="gpm? ( sys-libs/gpm )"
+DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
# berkdb? ( sys-libs/db )"
RDEPEND="${DEPEND}
!<x11-terms/rxvt-unicode-9.06-r3
- abi_x86_32? (
- !<=app-emulation/emul-linux-x86-baselibs-20130224-r12
- !app-emulation/emul-linux-x86-baselibs[-abi_x86_32(-)]
- )"
-# Put the MULTILIB_USEDEP on gpm in PDEPEND only to avoid circular deps.
-# We can move it to DEPEND and drop the --with-gpm=libgpm.so.1 from the econf
-# line below once we can assume multilib gpm is available everywhere.
-PDEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
+ !app-emulation/emul-linux-x86-baselibs"
S=${WORKDIR}/${MY_P}
HOSTTIC_DIR=${WORKDIR}/${P}-host
^ permalink raw reply related [flat|nested] 213+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/
@ 2015-08-12 10:09 Mike Frysinger
0 siblings, 0 replies; 213+ messages in thread
From: Mike Frysinger @ 2015-08-12 10:09 UTC (permalink / raw
To: gentoo-commits
commit: 912dfbf3095a5087982364d5813b3ebdc03c4cf7
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 12 08:48:41 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Wed Aug 12 10:09:16 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=912dfbf3
sys-libs/ncurses: use libgpm.so.1 all the time #544828
Since the gpm code relies on running ldd on the linked file in order to
calculate the SONAME, and we're passing this in as a configure flag some
of the time, just change the code to always pass it in. This stabilizes
behavior across cross-compiling/multilib/ldd output/etc... Relying on
ldd output in general is bad juju.
sys-libs/ncurses/ncurses-5.9-r3.ebuild | 5 +++--
sys-libs/ncurses/ncurses-5.9-r4.ebuild | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-5.9-r3.ebuild b/sys-libs/ncurses/ncurses-5.9-r3.ebuild
index 1803834..59540d4 100644
--- a/sys-libs/ncurses/ncurses-5.9-r3.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r3.ebuild
@@ -98,8 +98,9 @@ do_configure() {
$(use_with cxx cxx-binding)
$(use_with debug)
$(use_with profile)
- $(use_with gpm)
- $(multilib_is_native_abi || use_with gpm gpm libgpm.so.1)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
--disable-termcap
--enable-symlinks
--with-rcs-ids
diff --git a/sys-libs/ncurses/ncurses-5.9-r4.ebuild b/sys-libs/ncurses/ncurses-5.9-r4.ebuild
index e4553aa..2d241b1 100644
--- a/sys-libs/ncurses/ncurses-5.9-r4.ebuild
+++ b/sys-libs/ncurses/ncurses-5.9-r4.ebuild
@@ -100,8 +100,9 @@ do_configure() {
$(use_with cxx cxx-binding)
$(use_with debug)
$(use_with profile)
- $(use_with gpm)
- $(multilib_is_native_abi || use_with gpm gpm libgpm.so.1)
+ # The configure script uses ldd to parse the linked output which
+ # is flaky for cross-compiling/multilib/ldd versions/etc...
+ $(use_with gpm gpm libgpm.so.1)
--disable-termcap
--enable-symlinks
--with-rcs-ids
^ permalink raw reply related [flat|nested] 213+ messages in thread
end of thread, other threads:[~2024-11-17 5:47 UTC | newest]
Thread overview: 213+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-11-06 3:17 [gentoo-commits] repo/gentoo:master commit in: sys-libs/ncurses/ Mike Gilbert
-- strict thread matches above, loose matches on Subject: below --
2024-11-17 5:47 Sam James
2024-11-03 21:51 Andreas K. Hüttel
2024-06-22 12:28 Sam James
2024-06-22 12:28 Sam James
2024-05-11 15:19 Sam James
2024-05-07 18:54 Sam James
2024-04-28 4:32 Sam James
2024-04-28 4:32 Sam James
2024-04-28 4:32 Sam James
2024-04-28 4:32 Sam James
2024-04-28 4:32 Sam James
2024-04-28 4:32 Sam James
2024-04-28 4:32 Sam James
2024-04-28 4:03 Sam James
2024-04-28 4:03 Sam James
2024-04-28 4:03 Sam James
2024-04-28 4:03 Sam James
2024-04-28 4:03 Sam James
2024-04-28 4:03 Sam James
2024-04-28 4:03 Sam James
2024-04-28 4:03 Sam James
2024-04-15 2:09 Sam James
2024-04-15 2:03 Sam James
2024-04-06 9:04 Sam James
2023-06-29 6:18 Sam James
2023-06-25 19:17 Sam James
2023-06-02 18:39 Sam James
2023-06-02 0:33 Sam James
2023-05-29 18:21 Sam James
2023-05-21 2:22 Sam James
2023-05-13 7:15 Arthur Zamarin
2023-05-13 3:54 Sam James
2023-05-13 3:54 Sam James
2023-05-13 3:34 Sam James
2023-05-13 3:17 Sam James
2023-05-13 3:17 Sam James
2023-05-13 3:17 Sam James
2023-05-13 3:17 Sam James
2023-05-13 2:35 Sam James
2023-04-13 7:27 Sam James
2023-04-13 1:49 Sam James
2023-02-24 12:59 Sam James
2023-02-22 7:42 Sam James
2023-01-01 1:30 Sam James
2022-12-30 20:02 Mike Gilbert
2022-12-30 20:02 Mike Gilbert
2022-12-30 20:02 Mike Gilbert
2022-12-30 20:02 Mike Gilbert
2022-12-29 16:17 James Le Cuirot
2022-12-16 20:45 Arthur Zamarin
2022-12-16 15:54 Arthur Zamarin
2022-12-06 16:55 Sam James
2022-11-06 3:12 Mike Gilbert
2022-11-06 3:12 Mike Gilbert
2022-11-06 3:12 Mike Gilbert
2022-11-06 3:12 Mike Gilbert
2022-09-28 20:17 Sam James
2022-09-25 5:05 Sam James
2022-09-25 1:15 Sam James
2022-09-19 3:05 Sam James
2022-09-19 3:05 Sam James
2022-09-11 16:49 Sam James
2022-09-11 16:43 Sam James
2022-09-11 14:50 Sam James
2022-09-09 12:41 Sam James
2022-09-09 12:40 Sam James
2022-09-09 12:34 Sam James
2022-09-09 11:30 Sam James
2022-09-09 11:19 Sam James
2022-09-01 2:21 Sam James
2022-08-29 19:06 Sam James
2022-08-26 10:03 Sam James
2022-08-26 6:36 Sam James
2022-08-26 6:36 Sam James
2022-07-29 2:54 Sam James
2022-05-14 9:39 Jakov Smolić
2022-05-14 9:39 Jakov Smolić
2022-05-14 9:19 Jakov Smolić
2022-05-14 9:18 Jakov Smolić
2022-05-14 9:18 Jakov Smolić
2022-05-14 9:18 Jakov Smolić
2022-05-14 9:17 Arthur Zamarin
2022-05-14 8:35 Jakov Smolić
2022-05-08 9:02 WANG Xuerui
2022-05-08 9:02 WANG Xuerui
2022-05-03 17:52 Arthur Zamarin
2022-05-03 2:47 Sam James
2022-05-01 0:40 Sam James
2022-04-29 19:21 Sam James
2022-04-29 19:21 Sam James
2022-04-29 8:14 Sam James
2022-04-29 6:05 Agostino Sarubbo
2022-04-29 6:04 Agostino Sarubbo
2022-04-29 6:04 Agostino Sarubbo
2022-04-28 0:55 Sam James
2022-04-28 0:55 Sam James
2022-04-28 0:46 Sam James
2022-04-06 18:08 David Seifert
2021-11-11 3:28 Sam James
2021-11-10 3:19 Sam James
2021-11-01 2:23 Mike Frysinger
2021-10-27 15:07 Sam James
2021-10-27 4:13 Sam James
2021-10-26 3:14 Sam James
2021-10-24 0:19 Sam James
2021-10-23 13:51 Sam James
2021-10-23 13:51 Sam James
2021-10-23 13:51 Sam James
2021-10-23 13:51 Sam James
2021-10-22 8:21 Lars Wendler
2021-09-18 18:26 Sam James
2021-07-19 13:59 Lars Wendler
2021-05-09 12:53 David Seifert
2021-01-06 15:35 Fabian Groffen
2020-12-26 20:59 Sam James
2020-12-26 20:56 Sam James
2020-11-27 23:51 Sam James
2020-07-14 10:49 Lars Wendler
2020-05-11 16:49 Agostino Sarubbo
2020-05-10 8:10 Sergei Trofimovich
2020-05-08 17:15 Agostino Sarubbo
2020-05-08 17:13 Agostino Sarubbo
2020-05-08 17:11 Agostino Sarubbo
2020-05-06 14:23 Agostino Sarubbo
2020-03-29 10:16 Sergei Trofimovich
2020-02-13 10:20 Lars Wendler
2019-12-24 14:00 Mikle Kolyada
2019-12-17 21:41 Sergei Trofimovich
2019-12-15 14:07 Agostino Sarubbo
2019-12-15 13:59 Agostino Sarubbo
2019-12-15 12:48 Agostino Sarubbo
2019-12-15 11:38 Agostino Sarubbo
2019-12-15 10:36 Mikle Kolyada
2019-12-14 23:01 Aaron Bauman
2019-07-28 20:07 Mikle Kolyada
2019-07-28 20:07 Mikle Kolyada
2019-07-28 20:07 Mikle Kolyada
2019-07-21 14:55 Aaron Bauman
2019-07-21 8:16 Sergei Trofimovich
2019-07-19 11:33 Agostino Sarubbo
2019-07-18 14:26 Agostino Sarubbo
2019-07-18 13:11 Agostino Sarubbo
2019-07-18 13:07 Agostino Sarubbo
2019-07-18 13:06 Agostino Sarubbo
2019-07-18 7:26 Agostino Sarubbo
2019-07-17 14:03 Agostino Sarubbo
2019-07-17 12:17 Mikle Kolyada
2019-07-16 15:13 Lars Wendler
2019-07-16 15:13 Lars Wendler
2019-06-08 22:25 James Le Cuirot
2019-05-21 18:21 Lars Wendler
2019-05-03 23:03 Mikle Kolyada
2018-06-25 22:02 Mike Frysinger
2018-06-25 22:02 Mike Frysinger
2018-05-17 8:49 Mikle Kolyada
2018-04-17 18:56 Lars Wendler
2018-04-17 17:58 Thomas Deutschmann
2018-04-15 17:01 Mikle Kolyada
2018-04-08 6:54 Matt Turner
2018-03-31 9:38 Jeroen Roovers
2018-03-28 19:45 Mart Raudsepp
2018-03-28 7:47 Lars Wendler
2018-03-27 19:07 Sergei Trofimovich
2018-03-25 20:22 Sergei Trofimovich
2018-03-25 13:46 Sergei Trofimovich
2018-03-24 21:19 Sergei Trofimovich
2018-03-24 8:00 Mikle Kolyada
2018-02-21 14:52 Lars Wendler
2018-02-21 8:13 Lars Wendler
2018-02-21 5:19 Jeroen Roovers
2018-02-20 13:57 Lars Wendler
2018-01-28 21:22 Lars Wendler
2018-01-20 18:34 Mike Frysinger
2018-01-02 11:08 Mike Frysinger
2017-12-31 21:49 Michał Górny
2017-03-09 5:01 Mike Frysinger
2017-01-15 15:28 Benda XU
2016-12-06 5:42 Mike Frysinger
2016-12-04 15:45 Lars Wendler
2016-11-15 15:40 Mike Frysinger
2016-11-15 15:40 Mike Frysinger
2016-10-26 16:35 Markus Meier
2016-10-21 18:13 Tobias Klausmann
2016-10-21 18:11 Tobias Klausmann
2016-10-09 7:30 Jeroen Roovers
2016-02-09 14:54 Fabian Groffen
2015-12-21 19:01 Michał Górny
2015-12-21 14:49 Patrick Lauer
2015-11-24 17:31 Mike Frysinger
2015-10-14 5:40 Benda XU
2015-10-02 12:01 Michał Górny
2015-08-31 18:44 Fabian Groffen
2015-08-30 1:52 Mike Gilbert
2015-08-28 17:39 Mike Frysinger
2015-08-28 10:53 Jason Zaman
2015-08-27 17:03 Jason Zaman
2015-08-27 17:03 Jason Zaman
2015-08-27 11:59 Jason Zaman
2015-08-27 6:53 Mike Frysinger
2015-08-26 18:20 Mike Frysinger
2015-08-26 12:28 Justin Lecher
2015-08-26 12:19 Justin Lecher
2015-08-17 13:52 Mike Frysinger
2015-08-17 13:52 Mike Frysinger
2015-08-12 10:38 Mike Frysinger
2015-08-12 10:38 Mike Frysinger
2015-08-12 10:38 Mike Frysinger
2015-08-12 10:38 Mike Frysinger
2015-08-12 10:38 Mike Frysinger
2015-08-12 10:38 Mike Frysinger
2015-08-12 10:38 Mike Frysinger
2015-08-12 10:09 Mike Frysinger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox