* [gentoo-commits] repo/gentoo:master commit in: net-nds/gssproxy/, net-nds/gssproxy/files/
@ 2022-01-15 12:32 Georgy Yakovlev
0 siblings, 0 replies; 5+ messages in thread
From: Georgy Yakovlev @ 2022-01-15 12:32 UTC (permalink / raw
To: gentoo-commits
commit: 7cb8559a91b2c1d8508b877e711ded939f0c0bef
Author: Georgy Yakovlev <gyakovlev <AT> gentoo <DOT> org>
AuthorDate: Sat Jan 15 12:22:48 2022 +0000
Commit: Georgy Yakovlev <gyakovlev <AT> gentoo <DOT> org>
CommitDate: Sat Jan 15 12:32:03 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7cb8559a
net-nds/gssproxy: create /var/lib/gssproxy/rcache
without that directory present krb nfs mounts fail with very confusing
and hard to debug messages.
systemd unit sets Environment=KRB5RCACHEDIR=/var/lib/gssproxy/rcache
but does not create it.
Let's do it in ebuild and openrc service.
Fedora's rpm spec also creates it mkdir -p %{buildroot}%{gpstatedir}/rcache
https://src.fedoraproject.org/rpms/gssproxy/blob/rawhide/f/gssproxy.spec
Signed-off-by: Georgy Yakovlev <gyakovlev <AT> gentoo.org>
net-nds/gssproxy/files/gssproxy | 1 +
net-nds/gssproxy/{gssproxy-0.8.4.ebuild => gssproxy-0.8.4-r1.ebuild} | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/net-nds/gssproxy/files/gssproxy b/net-nds/gssproxy/files/gssproxy
index 750e7623cdcc..34e4983b384f 100644
--- a/net-nds/gssproxy/files/gssproxy
+++ b/net-nds/gssproxy/files/gssproxy
@@ -12,4 +12,5 @@ depend() {
start_pre() {
checkpath -d -m 0755 /var/lib/gssproxy
+ checkpath -d -m 0755 /var/lib/gssproxy/rcache
}
diff --git a/net-nds/gssproxy/gssproxy-0.8.4.ebuild b/net-nds/gssproxy/gssproxy-0.8.4-r1.ebuild
similarity index 97%
rename from net-nds/gssproxy/gssproxy-0.8.4.ebuild
rename to net-nds/gssproxy/gssproxy-0.8.4-r1.ebuild
index dd5999942c52..df211a14dbf6 100644
--- a/net-nds/gssproxy/gssproxy-0.8.4.ebuild
+++ b/net-nds/gssproxy/gssproxy-0.8.4-r1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2021 Gentoo Authors
+# Copyright 1999-2022 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
@@ -82,6 +82,7 @@ src_install() {
newins examples/mech gssproxy.conf
keepdir /var/lib/gssproxy
+ keepdir /var/lib/gssproxy/rcache
# The build installs a bunch of empty dirs, so prune them.
find "${ED}" -depth -type d -empty -delete || die
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: net-nds/gssproxy/, net-nds/gssproxy/files/
@ 2022-01-15 12:42 Georgy Yakovlev
0 siblings, 0 replies; 5+ messages in thread
From: Georgy Yakovlev @ 2022-01-15 12:42 UTC (permalink / raw
To: gentoo-commits
commit: 5ec4f783e19a167a9fb40e71b132fc510b040958
Author: Georgy Yakovlev <gyakovlev <AT> gentoo <DOT> org>
AuthorDate: Sat Jan 15 12:42:05 2022 +0000
Commit: Georgy Yakovlev <gyakovlev <AT> gentoo <DOT> org>
CommitDate: Sat Jan 15 12:42:48 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5ec4f783
net-nds/gssproxy: create clients dir too, secure permissions
Signed-off-by: Georgy Yakovlev <gyakovlev <AT> gentoo.org>
net-nds/gssproxy/files/gssproxy | 3 ++-
.../gssproxy/{gssproxy-0.8.4-r1.ebuild => gssproxy-0.8.4-r2.ebuild} | 3 +++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/net-nds/gssproxy/files/gssproxy b/net-nds/gssproxy/files/gssproxy
index 34e4983b384f..83c594402258 100644
--- a/net-nds/gssproxy/files/gssproxy
+++ b/net-nds/gssproxy/files/gssproxy
@@ -12,5 +12,6 @@ depend() {
start_pre() {
checkpath -d -m 0755 /var/lib/gssproxy
- checkpath -d -m 0755 /var/lib/gssproxy/rcache
+ checkpath -d -m 0700 /var/lib/gssproxy/clients
+ checkpath -d -m 0700 /var/lib/gssproxy/rcache
}
diff --git a/net-nds/gssproxy/gssproxy-0.8.4-r1.ebuild b/net-nds/gssproxy/gssproxy-0.8.4-r2.ebuild
similarity index 96%
rename from net-nds/gssproxy/gssproxy-0.8.4-r1.ebuild
rename to net-nds/gssproxy/gssproxy-0.8.4-r2.ebuild
index df211a14dbf6..cdf4adce1dfb 100644
--- a/net-nds/gssproxy/gssproxy-0.8.4-r1.ebuild
+++ b/net-nds/gssproxy/gssproxy-0.8.4-r2.ebuild
@@ -82,7 +82,10 @@ src_install() {
newins examples/mech gssproxy.conf
keepdir /var/lib/gssproxy
+ keepdir /var/lib/gssproxy/clients
keepdir /var/lib/gssproxy/rcache
+ fperms 0700 /var/lib/gssproxy/clients
+ fperms 0700 /var/lib/gssproxy/rcache
# The build installs a bunch of empty dirs, so prune them.
find "${ED}" -depth -type d -empty -delete || die
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: net-nds/gssproxy/, net-nds/gssproxy/files/
@ 2022-06-01 6:38 Sam James
0 siblings, 0 replies; 5+ messages in thread
From: Sam James @ 2022-06-01 6:38 UTC (permalink / raw
To: gentoo-commits
commit: 7cead118afb53b22923e581340d3e0c8d279a5bc
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Wed Jun 1 06:38:43 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Jun 1 06:38:43 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7cead118
net-nds/gssproxy: fix configure w/o systemd
Closes: https://bugs.gentoo.org/848909
Signed-off-by: Sam James <sam <AT> gentoo.org>
.../files/gssproxy-0.9.0-configure-systemd.patch | 38 ++++++++++++++++++++++
net-nds/gssproxy/gssproxy-0.9.0.ebuild | 22 ++++++++++++-
2 files changed, 59 insertions(+), 1 deletion(-)
diff --git a/net-nds/gssproxy/files/gssproxy-0.9.0-configure-systemd.patch b/net-nds/gssproxy/files/gssproxy-0.9.0-configure-systemd.patch
new file mode 100644
index 000000000000..501fe3896666
--- /dev/null
+++ b/net-nds/gssproxy/files/gssproxy-0.9.0-configure-systemd.patch
@@ -0,0 +1,38 @@
+https://github.com/gssapi/gssproxy/commit/325869a33cb923ab2123ab4179399a37503ed3b5.patch
+https://bugs.gentoo.org/848909
+
+From: Simo Sorce <simo@redhat.com>
+Date: Tue, 31 May 2022 11:09:14 -0400
+Subject: [PATCH] Move some configure checks out of a condition
+
+I was too aggressive in moving all systemd checks, some of them need to
+be performed at all times because there are conditionals ependent on the
+detection.
+
+The actual build for gss-only module is controlled by the BUILD_PROXY
+guard anyway, so the checking unconditionally should not cause any
+change for that configuration even when unused.
+
+Signed-off-by: Simo Sorce <simo@redhat.com>
+--- a/configure.ac
++++ b/configure.ac
+@@ -164,13 +164,13 @@ if test x$only_gss_module != xyes; then
+ [AC_MSG_ERROR([Could not find libcap headers])])
+ fi
+
+- if test x$initscript = xsystemd; then
+- WITH_SYSTEMD_UNIT_DIR
+- WITH_SYSTEMD_USER_UNIT_DIR
+- AM_CHECK_SYSTEMD
+- fi
+ fi
+ AM_CONDITIONAL([BUILD_PROXY], [test x$only_gss_module != xyes ])
++if test x$initscript = xsystemd; then
++ WITH_SYSTEMD_UNIT_DIR
++ WITH_SYSTEMD_USER_UNIT_DIR
++fi
++AM_CHECK_SYSTEMD
+
+ AC_ARG_ENABLE([always-interpose],
+ [AC_HELP_STRING([--enable-always-interpose],
+
diff --git a/net-nds/gssproxy/gssproxy-0.9.0.ebuild b/net-nds/gssproxy/gssproxy-0.9.0.ebuild
index ac3daab25f48..3a9749f43991 100644
--- a/net-nds/gssproxy/gssproxy-0.9.0.ebuild
+++ b/net-nds/gssproxy/gssproxy-0.9.0.ebuild
@@ -3,6 +3,9 @@
EAPI=7
+# Can drop after 0.9.0, just for patch
+inherit autotools
+
DESCRIPTION="Daemon to proxy GSSAPI context establishment and channel handling"
HOMEPAGE="https://github.com/gssapi/gssproxy"
SRC_URI="https://github.com/gssapi/${PN}/releases/download/v${PV}/${P}.tar.gz"
@@ -30,6 +33,10 @@ BDEPEND="
# unfeasible.
RESTRICT="test"
+PATCHES=(
+ "${FILESDIR}"/${P}-configure-systemd.patch
+)
+
# pkg_setup() {
# # Here instead of flag-logic in DEPEND, since virtual/krb5 does not
# # allow to specify the openldap use flag, which heimdal doesn't
@@ -55,6 +62,13 @@ RESTRICT="test"
# "${S}/tests/testlib.py" || die
# }
+src_prepare() {
+ default
+
+ # Just for 0.9.0 systemd patch
+ eautoreconf
+}
+
src_configure() {
local myeconfargs=(
# The build assumes localstatedir is /var and takes care of
@@ -65,7 +79,13 @@ src_configure() {
--with-initscript=$(usex systemd systemd none)
$(use_with selinux)
$(use_with debug gssidebug)
- $(use_with hardened hardening)
+
+ # We already set FORTIFY_SOURCE by default along with the
+ # other bits. But setting it on each compile line interferes
+ # with efforts to try e.g. FORTIFY_SOURCE=3. So, disable it,
+ # but there's no actual difference to the safety of the binaries
+ # because of Gentoo's configuration/patches to the toolchain.
+ --without-hardening
)
econf "${myeconfargs[@]}"
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: net-nds/gssproxy/, net-nds/gssproxy/files/
@ 2022-06-16 22:09 Sam James
0 siblings, 0 replies; 5+ messages in thread
From: Sam James @ 2022-06-16 22:09 UTC (permalink / raw
To: gentoo-commits
commit: 52f9eedce23475a9eb91391ff92dfcd76c24697f
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Jun 16 22:09:27 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Jun 16 22:09:34 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=52f9eedc
net-nds/gssproxy: drop 0.9.0
Signed-off-by: Sam James <sam <AT> gentoo.org>
net-nds/gssproxy/Manifest | 1 -
.../files/gssproxy-0.9.0-configure-systemd.patch | 38 -------
net-nds/gssproxy/gssproxy-0.9.0.ebuild | 112 ---------------------
3 files changed, 151 deletions(-)
diff --git a/net-nds/gssproxy/Manifest b/net-nds/gssproxy/Manifest
index f023b7afc92b..124be759a0d3 100644
--- a/net-nds/gssproxy/Manifest
+++ b/net-nds/gssproxy/Manifest
@@ -1,3 +1,2 @@
DIST gssproxy-0.8.4.tar.gz 567579 BLAKE2B 55519d2d439e168df0346cfa2655e01bc90191e17ea7d8c72c5f29c22ed6adca39e5adb4fd900f6dc756147b2fbee23212bfc097c38ab927e6c9679b0186fa2c SHA512 ab81c40d6c7b1908751feb107d8da66603b7681fb67aa7a1f30194a81d542ca89e6c2f34425e9356b9c55eb3691bfa240ba41441c01498af45e862a133cd088a
-DIST gssproxy-0.9.0.tar.gz 578823 BLAKE2B e018f24ff5a4aba071e1566f55ab65c160a69eae623d596b41e7889289b4d12d04ce4bfd244536d6e4610430d5dc98071a5a9fc2085d63de99ca1eef9120abe8 SHA512 0c597951bd9c26db93a8aeb0c1f7328d8ae03ec72838b376eef458b0021b6b5f6d814d6b2438472cc121c0938883d30125f0e10bda01a1d0896d7933856976c9
DIST gssproxy-0.9.1.tar.gz 579038 BLAKE2B a17e673876b4acf480b23a8086720f507cd3a85c2f328469b726ab1653a94cd9a3eb9dd9369dee30b57457b6e8125b67a86fc4186c387e58d2d96b1da7c55089 SHA512 767c4e73d5240a43a0586e836e7dc199b8baf0adbc5a1a2cbb6ffc6f0a7ca574a4fc541ca474ef696d78956724eb24c465760f680e7170f8d77d056513b6226b
diff --git a/net-nds/gssproxy/files/gssproxy-0.9.0-configure-systemd.patch b/net-nds/gssproxy/files/gssproxy-0.9.0-configure-systemd.patch
deleted file mode 100644
index 501fe3896666..000000000000
--- a/net-nds/gssproxy/files/gssproxy-0.9.0-configure-systemd.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-https://github.com/gssapi/gssproxy/commit/325869a33cb923ab2123ab4179399a37503ed3b5.patch
-https://bugs.gentoo.org/848909
-
-From: Simo Sorce <simo@redhat.com>
-Date: Tue, 31 May 2022 11:09:14 -0400
-Subject: [PATCH] Move some configure checks out of a condition
-
-I was too aggressive in moving all systemd checks, some of them need to
-be performed at all times because there are conditionals ependent on the
-detection.
-
-The actual build for gss-only module is controlled by the BUILD_PROXY
-guard anyway, so the checking unconditionally should not cause any
-change for that configuration even when unused.
-
-Signed-off-by: Simo Sorce <simo@redhat.com>
---- a/configure.ac
-+++ b/configure.ac
-@@ -164,13 +164,13 @@ if test x$only_gss_module != xyes; then
- [AC_MSG_ERROR([Could not find libcap headers])])
- fi
-
-- if test x$initscript = xsystemd; then
-- WITH_SYSTEMD_UNIT_DIR
-- WITH_SYSTEMD_USER_UNIT_DIR
-- AM_CHECK_SYSTEMD
-- fi
- fi
- AM_CONDITIONAL([BUILD_PROXY], [test x$only_gss_module != xyes ])
-+if test x$initscript = xsystemd; then
-+ WITH_SYSTEMD_UNIT_DIR
-+ WITH_SYSTEMD_USER_UNIT_DIR
-+fi
-+AM_CHECK_SYSTEMD
-
- AC_ARG_ENABLE([always-interpose],
- [AC_HELP_STRING([--enable-always-interpose],
-
diff --git a/net-nds/gssproxy/gssproxy-0.9.0.ebuild b/net-nds/gssproxy/gssproxy-0.9.0.ebuild
deleted file mode 100644
index 3a9749f43991..000000000000
--- a/net-nds/gssproxy/gssproxy-0.9.0.ebuild
+++ /dev/null
@@ -1,112 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-# Can drop after 0.9.0, just for patch
-inherit autotools
-
-DESCRIPTION="Daemon to proxy GSSAPI context establishment and channel handling"
-HOMEPAGE="https://github.com/gssapi/gssproxy"
-SRC_URI="https://github.com/gssapi/${PN}/releases/download/v${PV}/${P}.tar.gz"
-
-LICENSE="BSD-1"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
-IUSE="debug selinux systemd hardened"
-
-COMMON_DEPEND=">=dev-libs/libverto-0.2.2
- >=dev-libs/ding-libs-0.6.1
- virtual/krb5
- selinux? ( sys-libs/libselinux )"
-RDEPEND="${COMMON_DEPEND}
- selinux? ( sec-policy/selinux-gssproxy )"
-# We need xml stuff to build the man pages, and people really want/need
-# the man pages for this package :). #585200
-BDEPEND="
- app-text/docbook-xml-dtd:4.4
- dev-libs/libxslt
- virtual/pkgconfig
-"
-
-# Many requirements to run tests, including running slapd as root, hence
-# unfeasible.
-RESTRICT="test"
-
-PATCHES=(
- "${FILESDIR}"/${P}-configure-systemd.patch
-)
-
-# pkg_setup() {
-# # Here instead of flag-logic in DEPEND, since virtual/krb5 does not
-# # allow to specify the openldap use flag, which heimdal doesn't
-# # support.
-# # Using mit-krb5 explicitly because heimdal doesn't install kerberos
-# # schemata required for the tests of gss-proxy.
-# if use test && ! has_version "app-crypt/mit-krb5[openldap]"; then
-# eerror "Tests of this package require the kerberos schemata installed from app-crypt/mit-krb5[openldap]."
-# die "Tests enabled but no app-crypt/mit-krb5[openldap] being installed."
-# fi
-# }
-
-# Was required in 0.7.0 to fix the schema- and slapd-path. Reason for
-# comment: see RESTRICT comment
-# src_prepare() {
-# default
-# # The tests look for kerberos schemata in the documentation
-# # directory of krb5, however these are installed in /etc/openldap
-# # and only if the openldap useflag is supplied
-# sed -i \
-# -e 's#/usr/share/doc/krb5-server-ldap*#/etc/openldap/schema#' \
-# -e "s#\(subprocess.Popen..\"\)slapd#\1/usr/$(get_libdir)/openldap/slapd#" \
-# "${S}/tests/testlib.py" || die
-# }
-
-src_prepare() {
- default
-
- # Just for 0.9.0 systemd patch
- eautoreconf
-}
-
-src_configure() {
- local myeconfargs=(
- # The build assumes localstatedir is /var and takes care of
- # using all the right subdirs itself.
- --localstatedir="${EPREFIX}"/var
-
- --with-os=gentoo
- --with-initscript=$(usex systemd systemd none)
- $(use_with selinux)
- $(use_with debug gssidebug)
-
- # We already set FORTIFY_SOURCE by default along with the
- # other bits. But setting it on each compile line interferes
- # with efforts to try e.g. FORTIFY_SOURCE=3. So, disable it,
- # but there's no actual difference to the safety of the binaries
- # because of Gentoo's configuration/patches to the toolchain.
- --without-hardening
- )
-
- econf "${myeconfargs[@]}"
-}
-
-src_install() {
- default
-
- # This is a plugin module, so no need for la file.
- find "${ED}"/usr -name proxymech.la -delete || die
-
- doinitd "${FILESDIR}"/gssproxy
- insinto /etc/gssproxy
- doins examples/*.conf
-
- keepdir /var/lib/gssproxy
- keepdir /var/lib/gssproxy/clients
- keepdir /var/lib/gssproxy/rcache
- fperms 0700 /var/lib/gssproxy/clients
- fperms 0700 /var/lib/gssproxy/rcache
-
- # The build installs a bunch of empty dirs, so prune them.
- find "${ED}" -depth -type d -empty -delete || die
-}
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: net-nds/gssproxy/, net-nds/gssproxy/files/
@ 2023-12-28 4:23 Sam James
0 siblings, 0 replies; 5+ messages in thread
From: Sam James @ 2023-12-28 4:23 UTC (permalink / raw
To: gentoo-commits
commit: 6e3971dbf664dc31ddcd0062009e761d87b0450c
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Dec 28 04:16:33 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Dec 28 04:16:33 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6e3971db
net-nds/gssproxy: drop 0.9.1, 0.9.1-r1
Signed-off-by: Sam James <sam <AT> gentoo.org>
net-nds/gssproxy/Manifest | 1 -
.../gssproxy-0.9.1-fix-musl-llvm16-build.patch | 30 ------
net-nds/gssproxy/gssproxy-0.9.1-r1.ebuild | 102 ---------------------
net-nds/gssproxy/gssproxy-0.9.1.ebuild | 98 --------------------
4 files changed, 231 deletions(-)
diff --git a/net-nds/gssproxy/Manifest b/net-nds/gssproxy/Manifest
index 5bbb2130220d..2e3b1aa132a5 100644
--- a/net-nds/gssproxy/Manifest
+++ b/net-nds/gssproxy/Manifest
@@ -1,2 +1 @@
-DIST gssproxy-0.9.1.tar.gz 579038 BLAKE2B a17e673876b4acf480b23a8086720f507cd3a85c2f328469b726ab1653a94cd9a3eb9dd9369dee30b57457b6e8125b67a86fc4186c387e58d2d96b1da7c55089 SHA512 767c4e73d5240a43a0586e836e7dc199b8baf0adbc5a1a2cbb6ffc6f0a7ca574a4fc541ca474ef696d78956724eb24c465760f680e7170f8d77d056513b6226b
DIST gssproxy-0.9.2.tar.gz 586240 BLAKE2B 4480070740ce77a9ed8714bbe8cb24684292317cc61e6c13e06b368bef6d722fdefb3c5230d15773050960851382435a15a0106e5d920c74b13afbbab9ff9194 SHA512 6de484c9c1715e8b845106e1b16e1c29805e4104db296eb44ea15e6b6973fd1df0b043d2cdc2798f04c7a0ce66279e356a285684bc3573ef847532ab2b87aca3
diff --git a/net-nds/gssproxy/files/gssproxy-0.9.1-fix-musl-llvm16-build.patch b/net-nds/gssproxy/files/gssproxy-0.9.1-fix-musl-llvm16-build.patch
deleted file mode 100644
index ac8c35c565ec..000000000000
--- a/net-nds/gssproxy/files/gssproxy-0.9.1-fix-musl-llvm16-build.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-https://github.com/gssapi/gssproxy/commit/f6ab3193e64ecc9db4d253b6dd99991f461b6081
-From: Brahmajit Das <brahmajit.xyz@gmail.com>
-Date: Wed, 31 May 2023 04:53:23 +0000
-Subject: [PATCH] Fix build with musl and llvm
-
-Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
---- a/src/gp_util.c
-+++ b/src/gp_util.c
-@@ -63,7 +63,7 @@ char *gp_strerror(int errnum)
- static __thread char buf[MAX_GP_STRERROR];
- int saved_errno = errno;
-
--#if ((_POSIX_C_SOURCE >= 200112L || _XOPEN_SOURCE >= 600) && !_GNU_SOURCE)
-+#if ((_POSIX_C_SOURCE >= 200112L || _XOPEN_SOURCE >= 600) && !_GNU_SOURCE) || !defined(__GLIBC__)
- /* XSI version */
- int ret;
-
---- a/tests/userproxytest.c
-+++ b/tests/userproxytest.c
-@@ -5,6 +5,7 @@
- #include <stdbool.h>
- #include <stdio.h>
- #include <stdlib.h>
-+#include <string.h>
- #include <sys/socket.h>
- #include <sys/un.h>
- #include <sys/wait.h>
---
-2.40.1
-
diff --git a/net-nds/gssproxy/gssproxy-0.9.1-r1.ebuild b/net-nds/gssproxy/gssproxy-0.9.1-r1.ebuild
deleted file mode 100644
index 5a9017c89d1f..000000000000
--- a/net-nds/gssproxy/gssproxy-0.9.1-r1.ebuild
+++ /dev/null
@@ -1,102 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-DESCRIPTION="Daemon to proxy GSSAPI context establishment and channel handling"
-HOMEPAGE="https://github.com/gssapi/gssproxy"
-SRC_URI="https://github.com/gssapi/${PN}/releases/download/v${PV}/${P}.tar.gz"
-
-LICENSE="BSD-1"
-SLOT="0"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~mips ~ppc ppc64 ~s390 ~sparc x86"
-IUSE="debug selinux systemd"
-
-COMMON_DEPEND=">=dev-libs/libverto-0.2.2
- >=dev-libs/ding-libs-0.6.1
- virtual/krb5
- selinux? ( sys-libs/libselinux )"
-RDEPEND="${COMMON_DEPEND}
- selinux? ( sec-policy/selinux-gssproxy )"
-# We need xml stuff to build the man pages, and people really want/need
-# the man pages for this package :). #585200
-BDEPEND="
- app-text/docbook-xml-dtd:4.4
- dev-libs/libxslt
- virtual/pkgconfig
-"
-
-# Many requirements to run tests, including running slapd as root, hence
-# unfeasible.
-RESTRICT="test"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-0.9.1-fix-musl-llvm16-build.patch
-)
-
-# pkg_setup() {
-# # Here instead of flag-logic in DEPEND, since virtual/krb5 does not
-# # allow to specify the openldap use flag, which heimdal doesn't
-# # support.
-# # Using mit-krb5 explicitly because heimdal doesn't install kerberos
-# # schemata required for the tests of gss-proxy.
-# if use test && ! has_version "app-crypt/mit-krb5[openldap]"; then
-# eerror "Tests of this package require the kerberos schemata installed from app-crypt/mit-krb5[openldap]."
-# die "Tests enabled but no app-crypt/mit-krb5[openldap] being installed."
-# fi
-# }
-
-# Was required in 0.7.0 to fix the schema- and slapd-path. Reason for
-# comment: see RESTRICT comment
-# src_prepare() {
-# default
-# # The tests look for kerberos schemata in the documentation
-# # directory of krb5, however these are installed in /etc/openldap
-# # and only if the openldap useflag is supplied
-# sed -i \
-# -e 's#/usr/share/doc/krb5-server-ldap*#/etc/openldap/schema#' \
-# -e "s#\(subprocess.Popen..\"\)slapd#\1/usr/$(get_libdir)/openldap/slapd#" \
-# "${S}/tests/testlib.py" || die
-# }
-
-src_configure() {
- local myeconfargs=(
- # The build assumes localstatedir is /var and takes care of
- # using all the right subdirs itself.
- --localstatedir="${EPREFIX}"/var
-
- --with-os=gentoo
- --with-initscript=$(usex systemd systemd none)
- $(use_with selinux)
- $(use_with debug gssidebug)
-
- # We already set FORTIFY_SOURCE by default along with the
- # other bits. But setting it on each compile line interferes
- # with efforts to try e.g. FORTIFY_SOURCE=3. So, disable it,
- # but there's no actual difference to the safety of the binaries
- # because of Gentoo's configuration/patches to the toolchain.
- --without-hardening
- )
-
- econf "${myeconfargs[@]}"
-}
-
-src_install() {
- default
-
- # This is a plugin module, so no need for la file.
- find "${ED}"/usr -name proxymech.la -delete || die
-
- doinitd "${FILESDIR}"/gssproxy
- insinto /etc/gssproxy
- doins examples/*.conf
-
- keepdir /var/lib/gssproxy
- keepdir /var/lib/gssproxy/clients
- keepdir /var/lib/gssproxy/rcache
- fperms 0700 /var/lib/gssproxy/clients
- fperms 0700 /var/lib/gssproxy/rcache
-
- # The build installs a bunch of empty dirs, so prune them.
- find "${ED}" -depth -type d -empty -delete || die
-}
diff --git a/net-nds/gssproxy/gssproxy-0.9.1.ebuild b/net-nds/gssproxy/gssproxy-0.9.1.ebuild
deleted file mode 100644
index fb9335bdb62a..000000000000
--- a/net-nds/gssproxy/gssproxy-0.9.1.ebuild
+++ /dev/null
@@ -1,98 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-DESCRIPTION="Daemon to proxy GSSAPI context establishment and channel handling"
-HOMEPAGE="https://github.com/gssapi/gssproxy"
-SRC_URI="https://github.com/gssapi/${PN}/releases/download/v${PV}/${P}.tar.gz"
-
-LICENSE="BSD-1"
-SLOT="0"
-KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~mips ~ppc ppc64 ~s390 ~sparc x86"
-IUSE="debug selinux systemd"
-
-COMMON_DEPEND=">=dev-libs/libverto-0.2.2
- >=dev-libs/ding-libs-0.6.1
- virtual/krb5
- selinux? ( sys-libs/libselinux )"
-RDEPEND="${COMMON_DEPEND}
- selinux? ( sec-policy/selinux-gssproxy )"
-# We need xml stuff to build the man pages, and people really want/need
-# the man pages for this package :). #585200
-BDEPEND="
- app-text/docbook-xml-dtd:4.4
- dev-libs/libxslt
- virtual/pkgconfig
-"
-
-# Many requirements to run tests, including running slapd as root, hence
-# unfeasible.
-RESTRICT="test"
-
-# pkg_setup() {
-# # Here instead of flag-logic in DEPEND, since virtual/krb5 does not
-# # allow to specify the openldap use flag, which heimdal doesn't
-# # support.
-# # Using mit-krb5 explicitly because heimdal doesn't install kerberos
-# # schemata required for the tests of gss-proxy.
-# if use test && ! has_version "app-crypt/mit-krb5[openldap]"; then
-# eerror "Tests of this package require the kerberos schemata installed from app-crypt/mit-krb5[openldap]."
-# die "Tests enabled but no app-crypt/mit-krb5[openldap] being installed."
-# fi
-# }
-
-# Was required in 0.7.0 to fix the schema- and slapd-path. Reason for
-# comment: see RESTRICT comment
-# src_prepare() {
-# default
-# # The tests look for kerberos schemata in the documentation
-# # directory of krb5, however these are installed in /etc/openldap
-# # and only if the openldap useflag is supplied
-# sed -i \
-# -e 's#/usr/share/doc/krb5-server-ldap*#/etc/openldap/schema#' \
-# -e "s#\(subprocess.Popen..\"\)slapd#\1/usr/$(get_libdir)/openldap/slapd#" \
-# "${S}/tests/testlib.py" || die
-# }
-
-src_configure() {
- local myeconfargs=(
- # The build assumes localstatedir is /var and takes care of
- # using all the right subdirs itself.
- --localstatedir="${EPREFIX}"/var
-
- --with-os=gentoo
- --with-initscript=$(usex systemd systemd none)
- $(use_with selinux)
- $(use_with debug gssidebug)
-
- # We already set FORTIFY_SOURCE by default along with the
- # other bits. But setting it on each compile line interferes
- # with efforts to try e.g. FORTIFY_SOURCE=3. So, disable it,
- # but there's no actual difference to the safety of the binaries
- # because of Gentoo's configuration/patches to the toolchain.
- --without-hardening
- )
-
- econf "${myeconfargs[@]}"
-}
-
-src_install() {
- default
-
- # This is a plugin module, so no need for la file.
- find "${ED}"/usr -name proxymech.la -delete || die
-
- doinitd "${FILESDIR}"/gssproxy
- insinto /etc/gssproxy
- doins examples/*.conf
-
- keepdir /var/lib/gssproxy
- keepdir /var/lib/gssproxy/clients
- keepdir /var/lib/gssproxy/rcache
- fperms 0700 /var/lib/gssproxy/clients
- fperms 0700 /var/lib/gssproxy/rcache
-
- # The build installs a bunch of empty dirs, so prune them.
- find "${ED}" -depth -type d -empty -delete || die
-}
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-12-28 4:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-01-15 12:42 [gentoo-commits] repo/gentoo:master commit in: net-nds/gssproxy/, net-nds/gssproxy/files/ Georgy Yakovlev
-- strict thread matches above, loose matches on Subject: below --
2023-12-28 4:23 Sam James
2022-06-16 22:09 Sam James
2022-06-01 6:38 Sam James
2022-01-15 12:32 Georgy Yakovlev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox